## ## Copyright (c) 2010-2017 Intel Corporation ## ## Licensed under the Apache License, Version 2.0 (the "License"); ## you may not use this file except in compliance with the License. ## You may obtain a copy of the License at ## ## http://www.apache.org/licenses/LICENSE-2.0 ## ## Unless required by applicable law or agreed to in writing, software ## distributed under the License is distributed on an "AS IS" BASIS, ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ## See the License for the specific language governing permissions and ## limitations under the License. ## rapid (Rapid Automated Performance Indication for Dataplane) ************************************************************ rapid is a set of files offering an easy way to do a sanity check of the dataplane performance of an OpenStack environment. Copy the files in a directory on a machine that can run the OpenStack CLI commands and that can reach the OpenStack public network. You will need an image that has the PROX tool installed. The best way to do this is to use the packer tool to build an image for a target of your choice. You can also build this image manually by executing all the commands described in the deploycentos1.sh and deploycentos2.sh file. The default name of the qcow2 file should is rapidVM.qcow2 When using the packer tool, the first step is to upload an existing CentOs cloud image from the internet into OpenStack. Check out: https://cloud.centos.org/centos/7/images/ You should now source the proper .rc file so Packer can connect to your OpenStack. There are 3 files: centos.json, deploycentos1.sh and deploycentos2.sh, allowing you to create an image automatically. Run # packer build centos.json Edit centos.json to reflect the settings of your environment: The following fields need to be the ID's of your system: - "source_image": Needs to be the id of the Centos cloud image - "flavor": Needs to be the ID of the flavor existing in your OpenStack environment that will be used to start the VM in which we will install all tools - "networks": ID of the network that will be used for the VM - "use_floating_ip": true or false - "floating_ip_pool": ID of the floating ip pool in case floating ip are being used - "security_groups": ID of the security group being used Note that this procedure is not only installing the necessary tools to run PROX, but also does some system optimizations (tuned). Now you can run the createrapid.py file. Use help for more info on the usage: # ./createrapid.py --help createrapid.py will use the OpenStack CLI to create the flavor, key-pair, network, image, servers, ... It will create a .env file containing all info that will be used by runrapid.py to actually run the tests. Logging can be found in the CREATE.log file You can use floating IP addresses by specifying the floating IP network --floating_network NETWORK or directly connect throught the INTERNAL_NETWORK by using the following parameter: --floating_network NO /etc/resolv.conf will contain DNS info from the "best" interface. Since we are deploying VMs with multiple interface on different networks, this info might be taken from the "wrong" network (e.g. the dataplane network). It is good to provide also a working DNS on that network. Now you can run the runrapid.py file. Use help for more info on the usage: # ./runrapid.py --help The script will connect to all machines that have been instantiated and it will launch PROX in all machines. This will be done through the admin IP assigned to the machines. Once that is done it will connect to the PROX tcp socket and start sending commands to run the actual test. It will print test results on the screen while running. The actual test that is running is described in .test. Notes about prox_user_data.sh script: - The script contains commands that will be executed using cloud-init at startup of the VMs. - huge pages are allocated for DPDK on node 0 (hard-coded) in the VM. Note on using SRIOV ports: Before running createrapid, make sure the network, subnet and ports are already created This can be done as follows (change the parameters to your needs): openstack network create --share --external --provider-network-type flat --provider-physical-network physnet2 fast-network openstack subnet create --network fast-network --subnet-range 20.20.20.0/24 --gateway none fast-subnet openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port1 openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port2 openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port3 Make sure to use the network and subnet in the createrapid parameters list. Port1, Port2 and Port3 are being used in the *.env file. Note when doing tests using the gateway functionality on OVS: When a GW VM is sending packets on behalf of another VM (e.g. the generator), we need to make sure the OVS will allow those packets to go through. Therefore you need to the IP address of the generator in the "allowed address pairs" of the GW VM. Note when doing tests using encryption on OVS: Your OVS configuration might block encrypted packets. To allow packets to go through, you can disable port_security. You can do this by using the following commands neutron port-update xxxxxx --no-security-groups neutron port-update xxxxxx --port_security_enabled=False An example of the env file generated by createrapid.py can be found below. Note that this file can be created manually in case the stack is created in a different way (not using the createrapid.py). This can be useful in case you are not using OpenStack as a VIM or when using special configurations that cannot be achieved using createrapid.py. Fields needed for runrapid are: * all info in the [Mx] sections * the key information in the [OpenStack] section * the total_number_of_vms information in the [rapid] section [DEFAULT] admin_ip = none [M1] admin_ip = 192.168.4.130 dp_ip = 10.10.10.6 dp_mac = fa:16:3e:3c:1e:12 [M2] admin_ip = 192.168.4.140 dp_ip = 10.10.10.9 dp_mac = fa:16:3e:2a:00:5d [M3] admin_ip = 192.168.4.138 dp_ip = 10.10.10.11 dp_mac = fa:16:3e:ae:fa:86 [OpenStack] stack = rapid yaml = 3VMrapid.yaml key = prox flavor = prox_flavor image = rapidVM image_file = rapidVM.qcow2 dataplane_network = dataplane-network subnet = dpdk-subnet subnet_cidr = 10.10.10.0/24 internal_network = admin_internal_net floating_network = admin_floating_net [rapid] loglevel = DEBUG version = 17.10.25 total_number_of_vms = 3