From a59ed4772da29826915010a7c9d34b5ebd256c42 Mon Sep 17 00:00:00 2001 From: Anand B Jyoti Date: Tue, 18 Apr 2017 13:36:02 +0530 Subject: vFW: Adding Virtual Firewall VNF JIRA: SAMPLEVNF-4 vFW supports following features: - Basic packet filtering (malformed packets, IP fragments) - Connection tracking for TCP and UDP - Access Control List for rule based policy enforcement - SYN-flood protection via Synproxy* for TCP - UDP, TCP and ICMP protocol pass-through - CLI based enable/disable connection tracking, synproxy, basic packet filtering - Hardware and Software Load Balancing - L2L3 stack support for ARP/ICMP handling - Multithread support - Multiple physical port support Change-Id: I96d28858488ed8764370d161975bc1e0557c8b20 Signed-off-by: Anand B Jyoti [Push patch to gerrit] Signed-off-by: Deepak S --- docs/vFW/README.rst | 166 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 docs/vFW/README.rst (limited to 'docs/vFW/README.rst') diff --git a/docs/vFW/README.rst b/docs/vFW/README.rst new file mode 100644 index 00000000..45e8a17d --- /dev/null +++ b/docs/vFW/README.rst @@ -0,0 +1,166 @@ +.. This work is licensed under a creative commons attribution 4.0 international +.. license. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) opnfv, national center of scientific research "demokritos" and others. + +======================================================== +Virtual Firewall - vFW +======================================================== + +1. Introduction +============== +The virtual firewall (vFW) is an application implements Firewall. vFW is used +as a barrier between secure internal and an un-secure external network. The +firewall performs Dynamic Packet Filtering. This involves keeping track of the +state of Layer 4 (Transport)traffic,by examining both incoming and outgoing +packets over time. Packets which don't fall within expected parameters given +the state of the connection are discarded. The Dynamic Packet Filtering will +be performed by Connection Tracking component, similar to that supported in +linux. The firewall also supports Access Controlled List(ACL) for rule based +policy enforcement. Firewall is built on top of DPDK and uses the packet library. + +About DPDK +---------- +The DPDK IP Pipeline Framework provides a set of libraries to build a pipeline +application. In this document, vFW will be explained in detail with its own +building blocks. + +This document assumes the reader possesses the knowledge of DPDK concepts and +packet framework. For more details, read DPDK Getting Started Guide, DPDK +Programmers Guide, DPDK Sample Applications Guide. + +2. Scope +========== +This application provides a standalone DPDK based high performance vFW Virtual +Network Function implementation. + +3. Features +=========== +The vFW VNF currently supports the following functionality: + • Basic packet filtering (malformed packets, IP fragments) + • Connection tracking for TCP and UDP + • Access Control List for rule based policy enforcement + • SYN-flood protection via Synproxy* for TCP + • UDP, TCP and ICMP protocol pass-through + • CLI based enable/disable connection tracking, synproxy, basic packet + filtering + • Multithread support + • Multiple physical port support + • Hardware and Software Load Balancing + • L2L3 stack support for ARP/ICMP handling + • ARP (request, response, gratuitous) + • ICMP (terminal echo, echo response, passthrough) + • ICMPv6 and ND (Neighbor Discovery) + +4. High Level Design +==================== +The Firewall performs basic filtering for malformed packets and dynamic packet +filtering incoming packets using the connection tracker library. +The connection data will be stored using a DPDK hash table. There will be one +entry in the hash table for each connection. The hash key will be based on source +address/port,destination address/port, and protocol of a packet. The hash key +will be processed to allow a single entry to be used, regardless of which +direction the packet is flowing (thus changing the source and destination). +The ACL is implemented as libray stattically linked to vFW, which is used for +used for rule based packet filtering. + +TCP connections and UDP pseudo connections will be tracked separately even if +theaddresses and ports are identical. Including the protocol in the hash key +will ensure this. + +The Input FIFO contains all the incoming packets for vFW filtering. The vFW +Filter has no dependency on which component has written to the Input FIFO. +Packets will be dequeued from the FIFO in bulk for processing by the vFW. +Packets will be enqueued to the output FIFO. +The software or hardware loadbalancing can be used for traffic distribution +across multiple worker threads. The hardware loadbalancing require ethernet +flow director support from hardware (eg. Fortville x710 NIC card). +The Input and Output FIFOs will be implemented using DPDK Ring Buffers. + +=================== +5. Components of vFW +=================== +In vFW, each component is constructed using packet framework pipelines. +It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and +vfw worker pipeline components. A Pipeline framework is a collection of input +ports, table(s),output ports and actions (functions). + +Receive and Transmit Driver +****************************** +Packets will be received in bulk and provided to LoadBalancer(LB) thread. +Transimit takes packets from worker threads in a dedicated ring and sent to +hardware queue. + +Master Pipeline +****************************** +The Master component is part of all the IP Pipeline applications. This component +does not process any packets and should configure with Core 0, to allow +other cores for processing of the traffic. This component is responsible for + 1. Initializing each component of the Pipeline application in different threads + 2. Providing CLI shell for the user control/debug + 3. Propagating the commands from user to the corresponding components + +ARPICMP Pipeline +****************************** +This pipeline processes the APRICMP packets. + +TXRX Pipelines +****************************** +The TXTX and RXRX pipelines are pass through pipelines to forward both ingress +and egress traffic to Loadbalancer. This is required when the Software +Loadbalancer is used. + +Load Balancer Pipeline +****************************** +The vFW support both hardware and software balancing for load balancing of +traffic across multiple VNF threads. The Hardware load balancing require support +from hardware like Flow Director for steering of packets to application through +hardware queues. + +The Software Load balancer is also supported if hardware load balancing can't be +used for any reason. The TXRX along with LOADB pipeline provides support for +software load balancing by distributing the flows to Multiple vFW worker +threads. +Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src +port, dest addr, dest port and protocol) applying an XOR logic distributing to +active worker threads, thereby maintaining an affinity of flows to worker +threads. + +vFW Pipeline +****************************** +The vFW performs the basic packet filtering and will drop the invalid and +malformed packets.The Dynamic packet filtering done using the connection tracker +library. The packets are processed in bulk and Hash table is used to maintain +the connection details. +Every TCP/UDP packets are passed through connection tracker library for valid +connection. The ACL library integrated to firewall provide rule based filtering. + +vFW Topology: +------------------------ +:: + IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA + operation: + Egress --> The packets sent out from ixia(port 0) will be Firewalled to ixia(port 1). + Igress --> The packets sent out from ixia(port 1) will be Firewalled to ixia(port 0). + +vFW Topology (L4REPLAY): +------------------------------------ +:: + IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY + operation: + Egress --> The packets sent out from ixia will pass through vFW to L3FWD/L4REPLAY. + Ingress --> The L4REPLAY upon reception of packets (Private to Public Network), + will immediately replay back the traffic to IXIA interface. (Pub -->Priv). + +How to run L4Replay: +-------------------- +:: + 1. After the installation of samplevnf: + go to + 2. ./buid/L4replay -c core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)" + eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)" + +6. Installation, Compile and Execution +----------------------------------------------------------------- +Plase refer to /docs/vFW/INSTALL.rst for installation, configuration, +compilation and execution. -- cgit 1.2.3-korg