From beecf87fb9e9b862994e5e3e6db2b1c378c971c1 Mon Sep 17 00:00:00 2001
From: Deepak S <deepak.s@linux.intel.com>
Date: Fri, 18 Aug 2017 14:59:46 -0700
Subject: Remove unwanted files in docs folder

JIRA: SAMPLEVNF-73

Change-Id: Ia147cfef9f7bcacd50477b6ea3c7d0a1c6e93952
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
---
 docs/testing/user/userguide/vACL/INSTALL.rst       | 233 ---------------------
 docs/testing/user/userguide/vACL/README.rst        | 159 --------------
 docs/testing/user/userguide/vACL/RELEASE_NOTES.rst |  81 -------
 docs/testing/user/userguide/vACL/index.rst         |  11 -
 docs/testing/user/userguide/vCGNAPT/INSTALL.rst    | 230 --------------------
 docs/testing/user/userguide/vCGNAPT/README.rst     | 197 -----------------
 .../user/userguide/vCGNAPT/RELEASE_NOTES.rst       |  90 --------
 docs/testing/user/userguide/vCGNAPT/index.rst      |  11 -
 docs/testing/user/userguide/vFW/INSTALL.rst        | 229 --------------------
 docs/testing/user/userguide/vFW/README.rst         | 182 ----------------
 docs/testing/user/userguide/vFW/RELEASE_NOTES.rst  |  92 --------
 docs/testing/user/userguide/vFW/index.rst          |  11 -
 12 files changed, 1526 deletions(-)
 delete mode 100644 docs/testing/user/userguide/vACL/INSTALL.rst
 delete mode 100644 docs/testing/user/userguide/vACL/README.rst
 delete mode 100644 docs/testing/user/userguide/vACL/RELEASE_NOTES.rst
 delete mode 100644 docs/testing/user/userguide/vACL/index.rst
 delete mode 100644 docs/testing/user/userguide/vCGNAPT/INSTALL.rst
 delete mode 100644 docs/testing/user/userguide/vCGNAPT/README.rst
 delete mode 100644 docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst
 delete mode 100644 docs/testing/user/userguide/vCGNAPT/index.rst
 delete mode 100644 docs/testing/user/userguide/vFW/INSTALL.rst
 delete mode 100644 docs/testing/user/userguide/vFW/README.rst
 delete mode 100644 docs/testing/user/userguide/vFW/RELEASE_NOTES.rst
 delete mode 100644 docs/testing/user/userguide/vFW/index.rst

(limited to 'docs/testing/user/userguide')

diff --git a/docs/testing/user/userguide/vACL/INSTALL.rst b/docs/testing/user/userguide/vACL/INSTALL.rst
deleted file mode 100644
index 7f21fc1f..00000000
--- a/docs/testing/user/userguide/vACL/INSTALL.rst
+++ /dev/null
@@ -1,233 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-============================
-vACL - Installation Guide
-============================
-
-vACL Compilation
-===================
-
-After downloading (or doing a git clone) in a directory (samplevnf)
-
--------------
-Dependencies
--------------
-
-- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05): Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/)
-- libpcap-dev
-- libzmq
-- libcurl
-
----------------------
-Environment variables
----------------------
-Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk
-
-::
-
-  export RTE_SDK=<dpdk directory>
-  export RTE_TARGET=x86_64-native-linuxapp-gcc
-
-This is done by vnf_build.sh script.
-
-Auto Build:
-===========
-$ ./tools/vnf_build.sh in samplevnf root folder
-
-Follow the steps in the screen from option [1] --> [9] and select option [8]
-to build the vnfs.
-It will automatically download selected DPDK version and any required patches
-and will setup everything and build vACL VNFs.
-
-Following are the options for setup:
-
-::
-
-        ----------------------------------------------------------
-         Step 1: Environment setup.
-        ----------------------------------------------------------
-        [1] Check OS and network connection
-        [2] Select DPDK RTE version
-
-        ----------------------------------------------------------
-         Step 2: Download and Install
-        ----------------------------------------------------------
-        [3] Agree to download
-        [4] Download packages
-        [5] Download DPDK zip
-        [6] Build and Install DPDK
-        [7] Setup hugepages
-
-        ----------------------------------------------------------
-         Step 3: Build VNFs
-        ----------------------------------------------------------
-        [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay)
-
-        [9] Exit Script
-
-An vACL executable will be created at the following location
-samplevnf/VNFs/vACL/build/vACL
-
-
-Manual Build:
-=============
-1. Download DPDK supported version from dpdk.org
-
-   - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
-
-2. unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04
-   (Not required for other DPDK versions)
-
-   - cd dpdk
-
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch
-
-   - build dpdk
-
-        - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
-        - cd x86_64-native-linuxapp-gcc
-        - make
-
-   - Setup huge pages
-
-        - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
-          explicitly and can also be optionally set as the default hugepage
-          size for the system. For example, to reserve 8G of hugepage memory
-          in the form of eight 1G pages, the following options should be passed
-          to the kernel:
-          * default_hugepagesz=1G hugepagesz=1G hugepages=8  hugepagesz=2M hugepages=2048
-        - Add this to Go to /etc/default/grub configuration file.
-        - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048"
-            to the GRUB_CMDLINE_LINUX entry.
-
-3. Setup Environment Variable
-
-   - export RTE_SDK=<samplevnf>/dpdk
-   - export RTE_TARGET=x86_64-native-linuxapp-gcc
-   - export VNF_CORE=<samplevnf>
-
-     or using ./tools/setenv.sh
-
-4. Build vACL VNFs
-
-   - cd <samplevnf>/VNFs/vACL
-   - make clean
-   - make
-
-5. The vACL executable will be created at the following location
-
-   - <samplevnf>/VNFs/vACL/build/vACL
-
-Run
-====
-
-----------------------
-Setup Port to run VNF
-----------------------
-
-::
-
-  For DPDK versions 16.04
-  1. cd <samplevnf>/dpdk
-  2. ./tools/dpdk_nic_bind.py --status <--- List the network device
-  3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-  For DPDK versions 16.11
-  1. cd <samplevnf>/dpdk
-  2. ./tools/dpdk-devbind.py --status <--- List the network device
-  3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-  For DPDK versions 17.xx
-  1. cd <samplevnf>/dpdk
-  2. ./usertools/dpdk-devbind.py --status <--- List the network device
-  3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-
-  Make the necessary changes to the config files to run the vACL VNF
-  eg: ports_mac_list = 00:00:00:30:21:00 00:00:00:30:21:00
-
------------------
-ACL run commands
------------------
-Update the configuration according to system configuration.
-
-::
-
-  ./build/vACL -p <port mask> -f <config> -s <script> - SW_LoadB
-
-  ./build/vACL -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB
-
-
-Run IPv4
---------
-
-::
-
- Software LoadB
-
-  cd <samplevnf>/VNFs/vACL/
-
-  ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/ IPv4_swlb_acl.tc
-
-
- Hardware LoadB
-
-  cd <samplevnf>/VNFs/vACL/
-
-  ./build/vACL -p 0x3 -f ./config/IPv4_hwlb_acl_1LB_1t.cfg  -s ./config/IPv4_hwlb_acl.tc --hwlb 1
-
-Run IPv6
---------
-
-::
-
-  Software LoadB
-
-  cd <samplevnf>/VNFs/vACL/
-
-  ./build/vACL -p 0x3 -f ./config/IPv6_swlb_acl_1LB_1t.cfg  -s ./config/IPv6_swlb_acl.tc
-
-
-  Hardware LoadB
-
-  cd <samplevnf>/VNFs/vACL/
-
-  ./build/vACL -p 0x3 -f ./config/IPv6_hwlb_acl_1LB_1t.cfg  -s ./config/IPv6_hwlb_acl.tc --hwlb 1
-
-vACL execution on BM & SRIOV
---------------------------------
-To run the VNF, execute the following
-
-::
-
-  samplevnf/VNFs/vACL# ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/ IPv4_swlb_acl.tc
-
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vACL configuration file
-  -s SCRIPT FILE: vACL script file
-
-vACL execution on OVS
--------------------------
-To run the VNF, execute the following:
-
-::
-
-  samplevnf/VNFs/vACL# ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg  -s ./config/ IPv4_swlb_acl.tc --disable-hw-csum
-
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vACL configuration file
-  -s SCRIPT FILE: vACL script file
-  --disable-hw-csum :Disable TCP/UDP hw checksum
diff --git a/docs/testing/user/userguide/vACL/README.rst b/docs/testing/user/userguide/vACL/README.rst
deleted file mode 100644
index f8c3e817..00000000
--- a/docs/testing/user/userguide/vACL/README.rst
+++ /dev/null
@@ -1,159 +0,0 @@
-.. This work is licensed under a creative commons attribution 4.0 international
-.. license.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) opnfv, national center of scientific research "demokritos" and others.
-
-========================================================
-vACL - Readme
-========================================================
-
-Introduction
-=================
-This application implements Access Control List (ACL). ACL is typically
-used for rule based policy enforcement. It restricts access to a destination
-IP address/port based on various header fields, such as source IP address/port,
-destination IP address/port and protocol. It is built on top of DPDK and
-uses the packet framework infrastructure.
-
-
-----------
-About DPDK
-----------
-The DPDK IP Pipeline Framework provides a set of libraries to build a pipeline
-application. In this document, vACL will be explained in detail with its own
-building blocks.
-
-This document assumes the reader possesses the knowledge of DPDK concepts and
-packet framework. For more details, read DPDK Getting Started Guide, DPDK
-Programmers Guide, DPDK Sample Applications Guide.
-
-Scope
-==========
-This application provides a standalone DPDK based high performance vACL Virtual
-Network Function implementation.
-
-Features
-===========
-The vACL VNF currently supports the following functionality
-  • CLI based Run-time rule configuration.(Add, Delete, List,  Display,  Clear, Modify)
-  • Ipv4 and ipv6 standard 5 tuple packet Selector support.
-  • Multithread support
-  • Multiple physical port support
-  • Hardware and Software Load Balancing
-  • L2L3 stack support for ARP/ICMP handling
-  • ARP (request, response, gratuitous)
-  • ICMP (terminal echo, echo response, passthrough)
-  • ICMPv6 and ND (Neighbor Discovery)
-
-High Level Design
-====================
-The ACL Filter performs bulk filtering of incoming packets based on rules in current ruleset,
-discarding any packets not permitted by the rules. The mechanisms needed for building the
-rule database and performing lookups are provided by the DPDK API.
-http://dpdk.org/doc/api/rte__acl_8h.html
-
-The Input FIFO contains all the incoming packets for ACL filtering. Packets will be dequeued
-from the FIFO in bulk for processing by the ACL. Packets will be enqueued to the output FIFO.
-The Input and Output FIFOs will be implemented using DPDK Ring Buffers.
-
-The DPDK ACL example: http://dpdk.org/doc/guides/sample_app_ug/l3_forward_access_ctrl.html
-#figure-ipv4-acl-rule contains a suitable syntax and parser for ACL rules.
-
-Components of vACL
-=======================
-In vACL, each component is constructed using packet framework pipelines.
-It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and
-vACL worker pipeline components. A Pipeline framework is a collection of input
-ports, table(s),output ports and actions (functions).
-
----------------------------
-Receive and Transmit Driver
----------------------------
-Packets will be received in bulk and provided to LoadBalancer(LB) thread.
-Transimit takes packets from worker threads in a dedicated ring and sent to
-hardware queue.
-
----------------------------
-Master Pipeline
----------------------------
-The Master component is part of all the IP Pipeline applications. This component
-does not process any packets and should configure with Core 0, to allow
-other cores for processing of the traffic. This component is responsible for
-1. Initializing each component of the Pipeline application in different threads
-2. Providing CLI shell for the user control/debug
-3. Propagating the commands from user to the corresponding components
-
----------------------------
-ARPICMP Pipeline
----------------------------
-This pipeline processes the APRICMP packets.
-
----------------------------
-TXRX Pipelines
----------------------------
-The TXTX and RXRX pipelines are pass through pipelines to forward both ingress
-and egress traffic to Loadbalancer. This is required when the Software
-Loadbalancer is used.
-
----------------------------
-Load Balancer Pipeline
----------------------------
-The vACL support both hardware and software balancing for load blalcning of
-traffic across multiple VNF threads. The Hardware load balncing require support
-from hardware like Flow Director for steering of packets to application through
-hardware queues.
-
-The Software Load balancer is also supported if hardware loadbalancing can't be
-used for any reason. The TXRX along with LOADB pipeline provides support for
-software load balancing by distributing the flows to Multiple vACL worker
-threads.
-Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src
-port, dest addr, dest port and protocol) applying an XOR logic distributing to
-active worker threads, thereby maintaining an affinity of flows to worker
-threads.
-
----------------------------
-vACL Pipeline
----------------------------
-The vACL performs the rule-based packet filtering.
-
-vACL Topology
-------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA
-  operation:
-
-    Egress --> The packets sent out from ixia(port 0) will be sent through ACL to ixia(port 1).
-
-    Igress --> The packets sent out from ixia(port 1) will be sent through ACL to ixia(port 0).
-
-vACL Topology (L4REPLAY)
-------------------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY
-
-  operation:
-
-    Egress --> The packets sent out from ixia will pass through vACL to L3FWD/L4REPLAY.
-
-    Ingress --> The L4REPLAY upon reception of packets (Private to Public Network),
-    will immediately replay back the traffic to IXIA interface. (Pub -->Priv).
-
-How to run L4Replay
---------------------
-After the installation of samplevnf
-
-::
-
-     go to <samplevnf/VNFs/L4Replay>
-     ./buid/L4replay -c  core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)"
-     eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)"
-
-Installation, Compile and Execution
-=======================================
-Plase refer to <samplevnf>/docs/vACL/INSTALL.rst for installation, configuration, compilation
-and execution.
diff --git a/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst b/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst
deleted file mode 100644
index c947a371..00000000
--- a/docs/testing/user/userguide/vACL/RELEASE_NOTES.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-=========================================================
-vACL - Release Notes
-=========================================================
-
-Introduction
-===================
-
-This is a beta release for Sample Virtual ACL VNF.
-This vACL can application can be run independently (refer INSTALL.rst).
-
-User Guide
-===============
-Refer to README.rst for further details on vACL, HLD, features supported, test
-plan. For build configurations and execution requisites please refer to
-INSTALL.rst.
-
-Feature for this release
-===========================
-The vACL VNF currently supports the following functionality:
-  • CLI based Run-time rule configuration.(Add,Delete,List,Display,Clear,Modify)
-  • Ipv4 and ipv6 standard 5 tuple packet Selector support.
-  • Multithread support
-  • Multiple physical port support
-  • Hardware and Software Load Balancing
-  • L2L3 stack support for ARP/ICMP handling
-  • ARP (request, response, gratuitous)
-  • ICMP (terminal echo, echo response, passthrough)
-  • ICMPv6 and ND (Neighbor Discovery)
-
-System requirements - OS and kernel version
-==============================================
-This is supported on Ubuntu 14.04 and 16.04 and kernel version less than 4.5
-
-   VNFs on BareMetal support:
-         OS: Ubuntu 14.04 or 16.04 LTS
-         kernel: < 4.5
-         http://releases.ubuntu.com/16.04/
-         Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-   VNFs on Standalone Hypervisor
-         HOST OS: Ubuntu 14.04 or 16.04 LTS
-         http://releases.ubuntu.com/16.04/
-         Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-            -   OVS (DPDK) - 2.5
-            -   kernel: < 4.5
-            -   Hypervisor - KVM
-            -   VM OS - Ubuntu 16.04/Ubuntu 14.04
-
-Known Bugs and limitations
-=============================
- - Hardware Load Balancer feature is supported on Fortville nic ACL
-   version 4.53 and below.
- - Hardware Checksum offload is not supported for IPv6 traffic.
- - vACL on sriov is tested upto 4 threads
-
-Future Work
-==============
-Following would be possible enhancements
- - Performance optimization on different platforms
-
-References
-=============
-Following links provides additional information for differenet version of DPDKs
-
-.. _QUICKSTART:
-                        http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html
-
-.. _DPDKGUIDE:
-                        http://dpdk.org/doc/guides-16.04/prog_guide/index.html
-                        http://dpdk.org/doc/guides-16.11/prog_guide/index.html
-                        http://dpdk.org/doc/guides-17.02/prog_guide/index.html
-                        http://dpdk.org/doc/guides-17.05/prog_guide/index.html
diff --git a/docs/testing/user/userguide/vACL/index.rst b/docs/testing/user/userguide/vACL/index.rst
deleted file mode 100644
index c1ae029b..00000000
--- a/docs/testing/user/userguide/vACL/index.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-####################
-vACL samplevnf
-####################
-
-.. toctree::
-   :numbered:
-   :maxdepth: 2
-
-   RELEASE_NOTES.rst
-   README.rst
-   INSTALL.rst
diff --git a/docs/testing/user/userguide/vCGNAPT/INSTALL.rst b/docs/testing/user/userguide/vCGNAPT/INSTALL.rst
deleted file mode 100644
index 85873109..00000000
--- a/docs/testing/user/userguide/vCGNAPT/INSTALL.rst
+++ /dev/null
@@ -1,230 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-============================
-vCGNAPT - Installation Guide
-============================
-
-
-vCGNAPT Compilation
-===================
-
-After downloading (or doing a git clone) in a directory (samplevnf)
-
-Dependencies
--------------
-
-- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05) Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/)
-- libpcap-dev
-- libzmq
-- libcurl
-
-Environment variables
----------------------
-
-Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk
-required only for DPDK version 16.04.
-
-::
-
-  export RTE_SDK=<dpdk directory>
-  export RTE_TARGET=x86_64-native-linuxapp-gcc
-
-This is done by vnf_build.sh script.
-
-Auto Build:
-===========
-$ ./tools/vnf_build.sh in samplevnf root folder
-
-Follow the steps in the screen from option [1] --> [9] and select option [8]
-to build the vnfs.
-It will automatically download selected DPDK version and any required patches
-and will setup everything and build vCGNAPT VNFs.
-
-Following are the options for setup:
-
-::
-
-        ----------------------------------------------------------
-         Step 1: Environment setup.
-        ----------------------------------------------------------
-        [1] Check OS and network connection
-        [2] Select DPDK RTE version
-
-        ----------------------------------------------------------
-         Step 2: Download and Install
-        ----------------------------------------------------------
-        [3] Agree to download
-        [4] Download packages
-        [5] Download DPDK zip
-        [6] Build and Install DPDK
-        [7] Setup hugepages
-
-        ----------------------------------------------------------
-         Step 3: Build VNFs
-        ----------------------------------------------------------
-        [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay)
-
-        [9] Exit Script
-
-An vCGNAPT executable will be created at the following location
-samplevnf/VNFs/vCGNAPT/build/vCGNAPT
-
-
-Manual Build:
-=============
-1. Download DPDK supported version from dpdk.org
-
-   - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
-2. unzip  dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04
-   (Not required for other DPDK versions)
-
-   - cd dpdk
-
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch
-
-   - build dpdk
-
-        - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
-        - cd x86_64-native-linuxapp-gcc
-        - make
-
-   - Setup huge pages
-
-        - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
-          explicitly and can also be optionally set as the default hugepage size for
-          the system. For example, to reserve 8G of hugepage memory in the form of
-          eight 1G pages, the following options should be passed to the kernel:
-          * default_hugepagesz=1G hugepagesz=1G hugepages=8  hugepagesz=2M hugepages=2048
-        - Add this to Go to /etc/default/grub configuration file.
-        - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048"
-            to the GRUB_CMDLINE_LINUX entry.
-
-3. Setup Environment Variable
-
-   - export RTE_SDK=<samplevnf>/dpdk
-   - export RTE_TARGET=x86_64-native-linuxapp-gcc
-   - export VNF_CORE=<samplevnf>
-     or using ./tools/setenv.sh
-
-4. Build vCGNAPT VNFs
-
-   - cd <samplevnf>/VNFs/vCGNAPT
-   - make clean
-   - make
-
-5. An vCGNAPT executable will be created at the following location
-
-   - <samplevnf>/VNFs/vCGNAPT/build/vCGNAPT
-
-Run
-====
-
-Setup Port to run VNF
-----------------------
-
-::
-
-  For DPDK versions 16.04
-  1. cd <samplevnf>/dpdk
-  2. ./tools/dpdk_nic_bind.py --status <--- List the network device
-  3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-  For DPDK versions 16.11
-  1. cd <samplevnf>/dpdk
-  2. ./tools/dpdk-devbind.py --status <--- List the network device
-  3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-  For DPDK versions 17.xx
-  1. cd <samplevnf>/dpdk
-  2. ./usertools/dpdk-devbind.py --status <--- List the network device
-  3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-  .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-  Make the necessary changes to the config files to run the vCGNAPT VNF
-  eg: ports_mac_list = 00:00:00:30:21:F0 00:00:00:30:21:F1
-
-Dynamic CGNAPT
---------------
-Update the configuration according to system configuration.
-
-::
-
-  ./vCGNAPT -p <port mask> -f <config> -s <script> - SW_LoadB
-  ./vCGNAPT -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB
-
-Static CGNAPT
--------------
-Update the script file and add Static NAT Entry
-
-::
-
-  e.g,
-  ;p <pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port>
-  ;p 3 entry addm 152.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535
-
-Run IPv4
-----------
-
-::
-
-  Software LoadB:
-
-  cd <samplevnf>/VNFs/vCGNAPT/build
-  ./vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T.cfg  -s ./config/arp_txrx_ScriptFile_2P.cfg
-
-
-  Hardware LoadB:
-
-  cd <samplevnf>/VNFs/vCGNAPT/build
-  ./vCGNAPT -p 0x3 -f ./config/arp_hwlb-2P-1T.cfg  -s ./config/arp_hwlb_scriptfile_2P.cfg --hwlb 1
-
-Run IPv6
----------
-
-::
-
-  Software LoadB:
-
-  cd <samplevnf>/VNFs/vCGNAPT/build
-  ./vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T-ipv6.cfg  -s ./config/arp_txrx_ScriptFile_2P.cfg
-
-
-  Hardware LoadB:
-
-  cd <samplevnf>/VNFs/vCGNAPT/build
-  ./vCGNAPT -p 0x3 -f ./config/arp_hwlb-2P-1T-ipv6.cfg  -s ./config/arp_hwlb_scriptfile_2P.cfg --hwlb 1
-
-vCGNAPT execution on BM & SRIOV
---------------------------------
-
-::
-
-  To run the VNF, execute the following:
-  samplevnf/VNFs/vCGNAPT# ./build/vCGNAPT -p 0x3 -f ./config/arp_txrx-2P-1T.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vCGNAPT configuration file
-  -s SCRIPT FILE: vCGNAPT script file
-
-vCGNAPT execution on OVS
--------------------------
-To run the VNF, execute the following:
-
-::
-
-  samplevnf/VNFs/vCGNAPT# ./build/vCGNAPT -p 0x3 ./config/arp_txrx-2P-1T.cfg -s ./config/arp_txrx_ScriptFile_2P.cfg --disable-hw-csum
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vCGNAPT configuration file
-  -s SCRIPT FILE: vCGNAPT script file
-  --disable-hw-csum :Disable TCP/UDP hw checksum
diff --git a/docs/testing/user/userguide/vCGNAPT/README.rst b/docs/testing/user/userguide/vCGNAPT/README.rst
deleted file mode 100644
index dd6bb079..00000000
--- a/docs/testing/user/userguide/vCGNAPT/README.rst
+++ /dev/null
@@ -1,197 +0,0 @@
-.. this work is licensed under a creative commons attribution 4.0 international
-.. license.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) opnfv, national center of scientific research "demokritos" and others.
-
-========================================================
-vCGNAPT - Readme
-========================================================
-
-Introduction
-==============
-This application implements vCGNAPT. The idea of vCGNAPT is to extend the life of
-the service providers IPv4 network infrastructure and mitigate IPv4 address
-exhaustion by using address and port translation in large scale. It processes the
-traffic in both the directions.
-
-It also supports the connectivity between the IPv6 access network to IPv4 data network
-using the IPv6 to IPv4 address translation and vice versa.
-
-About DPDK
-----------
-The DPDK IP Pipeline Framework provides set of libraries to build a pipeline
-application. In this document, CG-NAT application will be explained with its
-own building blocks.
-
-This document assumes the reader possess the knowledge of DPDK concepts and IP
-Pipeline Framework. For more details, read DPDK Getting Started Guide, DPDK
-Programmers Guide, DPDK Sample Applications Guide.
-
-Scope
-==========
-This application provides a standalone DPDK based high performance vCGNAPT
-Virtual Network  Function implementation.
-
-Features
-===========
-The vCGNAPT VNF currently supports the following functionality:
-  • Static NAT
-  • Dynamic NAT
-  • Static NAPT
-  • Dynamic NAPT
-  • ARP (request, response, gratuitous)
-  • ICMP (terminal echo, echo response, passthrough)
-  • ICMPv6 and ND (Neighbor Discovery)
-  • UDP, TCP and ICMP protocol passthrough
-  • Multithread support
-  • Multiple physical port support
-  • Limiting max ports per client
-  • Limiting max clients per public IP address
-  • Live Session tracking to NAT flow
-  • NAT64
-  • PCP Support
-  • ALG SIP
-  • ALG FTP
-
-High Level Design
-====================
-The Upstream path defines the traffic from Private to Public and the downstream
-path defines the traffic from Public to Private. The vCGNAPT has same set of
-components to process Upstream and Downstream traffic.
-
-In vCGNAPT application, each component is constructed as IP Pipeline framework.
-It includes Master pipeline component, load balancer pipeline component and vCGNAPT
-pipeline component.
-
-A Pipeline framework is collection of input ports, table(s), output ports and
-actions (functions). In vCGNAPT pipeline, main sub components are the Inport function
-handler, Table and Table function handler. vCGNAPT rules will be configured in the
-table which translates egress and ingress traffic according to physical port
-information from which side packet is arrived. The actions can be forwarding to the
-output port (either egress or ingress) or to drop the packet.
-
-vCGNAPT Graphical Overview
-==========================
-The idea of vCGNAPT is to extend the life of the service providers IPv4 network infrastructure
-and mitigate IPv4 address exhaustion by using address and port translation in large scale.
-It processes the traffic in both the directions.
-
-.. code-block:: console
-
-  +------------------+
-  |                 +-----+
-  | Private consumer | CPE  |---------------+
-  |   IPv4 traffic  +-----+                 |
-  +------------------+                      |
-                 +------------------+       v        +----------------+
-                 |                  | +------------+ |                |
-                 |   Private IPv4   | |  vCGNAPT   | |    Public      |
-                 |  access network  | |   NAT44    | |  IPv4 traffic  |
-                 |                  | +------------+ |                |
-                 +------------------+       |        +----------------+
-  +------------------+                      |
-  |                 +-----+                 |
-  | Private consumer| CPE |-----------------+
-  |  IPv4 traffic   +-----+
-  +------------------+
-      Figure 1: vCGNAPT deployment in Service provider network
-
-
-
-Components of vCGNAPT
-=====================
-
-In vCGNAPT, each component is constructed as a packet framework. It includes Master pipeline
-component, driver, load balancer pipeline component and vCGNAPT worker pipeline component. A
-pipeline framework is a collection of input ports, table(s), output ports and actions
-(functions).
-
-Receive and transmit driver
-----------------------------
-Packets will be received in bulk and provided to load balancer thread. The transmit takes
-packets from worker thread in a dedicated ring and sent to the hardware queue.
-
-ARPICMP pipeline
-------------------------
-ARPICMP pipeline is responsible for handling all l2l3 arp related packets.
-
-This component does not process any packets and should configure with Core 0,
-to save cores for other components which processes traffic. The component
-is responsible for:
-1. Initializing each component of the Pipeline application in different threads
-2. Providing CLI shell for the user
-3. Propagating the commands from user to the corresponding components.
-4. ARP and ICMP are handled here.
-
-Load Balancer pipeline
-------------------------
-Load balancer is part of the Multi-Threaded CGMAPT release which distributes
-the flows to Multiple ACL worker threads.
-
-Distributes traffic based on the 2 or 5 tuple (source address, source port,
-destination  address, destination port and protocol) applying an XOR logic
-distributing the  load to active worker threads, thereby maintaining an
-affinity of flows to  worker threads.
-
-Tuple can be modified/configured using configuration file
-
-vCGNAPT - Static
-====================
-The vCGNAPT component performs translation of private IP & port to public IP &
-port at egress side and public IP & port to private IP & port at Ingress side
-based on the NAT rules added to the pipeline Hash table. The NAT rules are
-added to the Hash table via user commands. The packets that have a matching
-egress key or ingress key in the NAT table will be processed to change IP &
-port and will be forwarded to the output port. The packets that do not have a
-match will be taken a default action. The default action may result in drop of
-the packets.
-
-vCGNAPT - Dynamic
-===================
-The vCGNAPT component performs translation of private IP & port to public IP & port
-at egress side and public IP & port to private IP & port at Ingress side based on the
-NAT rules added to the pipeline Hash table. Dynamic nature of vCGNAPT refers to the
-addition of NAT entries in the Hash table dynamically when new packet arrives. The NAT
-rules will be added to the Hash table automatically when there is no matching entry in
-the table and the packet is circulated through software queue. The packets that have a
-matching egress key or ingress key in the NAT table will be processed to change IP &
-port and will be forwarded to the output port defined in the entry.
-
-Dynamic vCGNAPT acts as static one too, we can do NAT entries statically. Static NAT
-entries port range must not conflict to dynamic NAT port range.
-
-vCGNAPT Static Topology
-------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA
-  operation:
-  Egress --> The packets sent out from ixia(port 0) will be CGNAPTed to ixia(port 1).
-  Igress --> The packets sent out from ixia(port 1) will be CGNAPTed to ixia(port 0).
-
-vCGNAPT Dynamic Topology (L4REPLAY)
-------------------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY
-  operation:
-  Egress --> The packets sent out from ixia will be CGNAPTed to L3FWD/L4REPLAY.
-  Ingress --> The L4REPLAY upon reception of packets (Private to Public Network),
-  will immediately replay back the traffic to IXIA interface. (Pub -->Priv).
-
-How to run L4Replay
---------------------
-After the installation of samplevnf:
-
-::
-
- go to <samplevnf/VNFs/L4Replay>
- ./buid/L4replay -c  core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)"
-     eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)"
-
-Installation, Compile and Execution
-====================================
-Plase refer to <samplevnf>/docs/vCGNAPT/INSTALL.rst for installation, configuration, compilation
-and execution.
diff --git a/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst b/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst
deleted file mode 100644
index a776a54d..00000000
--- a/docs/testing/user/userguide/vCGNAPT/RELEASE_NOTES.rst
+++ /dev/null
@@ -1,90 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-=========================================================
-vCGNAPT - Release Notes
-=========================================================
-
-Introduction
-================
-This is the beta release for vCGNAPT VNF.
-vCGNAPT application can be run independently (refer INSTALL.rst).
-
-User Guide
-===============
-Refer to README.rst for further details on vCGNAPT, HLD, features supported,
-test plan. For build configurations and execution requisites please refer to
-INSTALL.rst.
-
-Feature for this release
-===========================
-This release supports following features as part of vCGNAPT
-
-- vCGNAPT can run as a standalone application on bare-metal linux server or on a virtual machine using SRIOV and OVS dpdk.
-- Static NAT
-- Dynamic NAT
-- Static NAPT
-- Dynamic NAPT
-- ARP (request, response, gratuitous)
-- ICMP (terminal echo, echo response, passthrough)
-- ICMPv6 and ND (Neighbor Discovery)
-- UDP, TCP and ICMP protocol passthrough
-- Multithread support
-- Multiple physical port support
-- Limiting max ports per client
-- Limiting max clients per public IP address
-- Live Session tracking to NAT flow
-- PCP support
-- NAT64
-- ALG SIP
-- ALG FTP
-
-System requirements - OS and kernel version
-==============================================
-This is supported on Ubuntu 14.04 and 16.04 and kernel version less than 4.5
-
-   VNFs on BareMetal support:
-         OS: Ubuntu 14.04 or 16.04 LTS
-         kernel: < 4.5
-         http://releases.ubuntu.com/16.04/
-         Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-   VNFs on Standalone Hypervisor
-         HOST OS: Ubuntu 14.04 or 16.04 LTS
-         http://releases.ubuntu.com/16.04/
-         Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-             - OVS (DPDK) - 2.5
-             - kernel: < 4.5
-             - Hypervisor - KVM
-             - VM OS - Ubuntu 16.04/Ubuntu 14.04
-
-Known Bugs and limitations
-=============================
-- Hadware Load Balancer feature is supported on fortville nic FW version 4.53 and below.
-- L4 UDP Replay is used to capture throughput for dynamic cgnapt
-- Hardware Checksum offload is not supported for IPv6 traffic.
-- CGNAPT on sriov is tested till 4 threads
-
-Future Work
-==============
-- SCTP passthrough support
-- Multi-homing support
-- Performance optimization on different platforms
-
-References
-=============
-Following links provides additional information for differenet version of DPDKs
-        .. _QUICKSTART:
-                        http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html
-                        http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html
-
-        .. _DPDKGUIDE:
-                        http://dpdk.org/doc/guides-16.04/prog_guide/index.html
-                        http://dpdk.org/doc/guides-16.11/prog_guide/index.html
-                        http://dpdk.org/doc/guides-17.02/prog_guide/index.html
-                        http://dpdk.org/doc/guides-17.05/prog_guide/index.html
diff --git a/docs/testing/user/userguide/vCGNAPT/index.rst b/docs/testing/user/userguide/vCGNAPT/index.rst
deleted file mode 100644
index aacda1c2..00000000
--- a/docs/testing/user/userguide/vCGNAPT/index.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-####################
-vCGNAPT samplevnf
-####################
-
-.. toctree::
-   :numbered:
-   :maxdepth: 2
-
-   RELEASE_NOTES.rst
-   README.rst
-   INSTALL.rst
diff --git a/docs/testing/user/userguide/vFW/INSTALL.rst b/docs/testing/user/userguide/vFW/INSTALL.rst
deleted file mode 100644
index b4cee086..00000000
--- a/docs/testing/user/userguide/vFW/INSTALL.rst
+++ /dev/null
@@ -1,229 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-============================
-vFW - Installation Guide
-============================
-
-
-vFW Compilation
-================
-After downloading (or doing a git clone) in a directory (samplevnf)
-
--------------
-Dependencies
--------------
-
-- DPDK supported versions ($DPDK_RTE_VER = 16.04, 16.11, 17.02 or 17.05). Downloaded and installed via vnf_build.sh or manually from [here] (http://fast.dpdk.org/rel/dpdk-$DPDK_RTE_VER.zip). Both the options are available as part of vnf_build.sh below.
-- libpcap-dev
-- libzmq
-- libcurl
-
----------------------
-Environment variables
----------------------
-Apply all the additional patches in 'patches/dpdk_custom_patch/' and build dpdk
-(NOTE: required only for DPDK version 16.04).
-
-::
-
-  export RTE_SDK=<dpdk directory>
-
-  export RTE_TARGET=x86_64-native-linuxapp-gcc
-
-This is done by vnf_build.sh script.
-
-Auto Build
-===========
-$ ./tools/vnf_build.sh in samplevnf root folder
-
-Follow the steps in the screen from option [1] --> [9] and select option [8]
-to build the vnfs.
-It will automatically download selected DPDK version and any required patches
-and will setup everything and build vFW VNFs.
-
-Following are the options for setup:
-
-::
-
-        ----------------------------------------------------------
-         Step 1: Environment setup.
-        ----------------------------------------------------------
-        [1] Check OS and network connection
-        [2] Select DPDK RTE version
-
-        ----------------------------------------------------------
-         Step 2: Download and Install
-        ----------------------------------------------------------
-        [3] Agree to download
-        [4] Download packages
-        [5] Download DPDK zip
-        [6] Build and Install DPDK
-        [7] Setup hugepages
-
-        ----------------------------------------------------------
-         Step 3: Build VNFs
-        ----------------------------------------------------------
-        [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay)
-
-        [9] Exit Script
-
-An vFW executable will be created at the following location
-samplevnf/VNFs/vFW/build/vFW
-
-Manual Build
-=============
-1. Download DPDK supported version from dpdk.org
-
-   - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
-2. unzip  dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04
-   (Not required for other DPDK versions)
-
-   - cd dpdk
-
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-management.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-Rx-hang-when-disable-LLDP.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-link-status-change-interrupt.patch
-         - patch -p1 < VNF_CORE/patches/dpdk_custom_patch/i40e-fix-VF-bonded-device-link-down.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/disable-acl-debug-logs.patch
-         - patch -p1 < $VNF_CORE/patches/dpdk_custom_patch/set-log-level-to-info.patch
-
-   - build dpdk
-        - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
-        - cd x86_64-native-linuxapp-gcc
-        - make
-
-   - Setup huge pages
-        - For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
-          explicitly and can also be optionally set as the default hugepage
-          size for the system. For example, to reserve 8G of hugepage memory in
-          the form of eight 1G pages, the following options should be passed
-          to the kernel:
-          * default_hugepagesz=1G hugepagesz=1G hugepages=8  hugepagesz=2M hugepages=2048
-        - Add this to Go to /etc/default/grub configuration file.
-        - Append "default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048"
-            to the GRUB_CMDLINE_LINUX entry.
-
-3. Setup Environment Variable
-
-   - export RTE_SDK=<samplevnf>/dpdk
-   - export RTE_TARGET=x86_64-native-linuxapp-gcc
-   - export VNF_CORE=<samplevnf>
-
-   or using ./tools/setenv.sh
-
-4. Build vFW VNFs
-
-   - cd <samplevnf>/VNFs/vFW
-   - make clean
-   - make
-
-5. The vFW executable will be created at the following location
-
-   - <samplevnf>/VNFs/vFW/build/vFW
-
-Run
-====
-
-----------------------
-Setup Port to run VNF
-----------------------
-The tools folder and utilities names are different across DPDK versions.
-
-::
-
- For DPDK versions 16.04
- 1. cd <samplevnf>/dpdk
- 2. ./tools/dpdk_nic_bind.py --status <--- List the network device
- 3. ./tools/dpdk_nic_bind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-
-  .. _More details: http://dpdk.org/doc/guides-16.04/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
- For DPDK versions 16.11
- 1. cd <samplevnf>/dpdk
- 2. ./tools/dpdk-devbind.py --status <--- List the network device
- 3. ./tools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-
-  .. _More details: http://dpdk.org/doc/guides-16.11/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
- For DPDK versions 17.xx
- 1. cd <samplevnf>/dpdk
- 2. ./usertools/dpdk-devbind.py --status <--- List the network device
- 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
-
-  .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
-
-Make the necessary changes to the config files to run the vFW VNF
-
-eg: ports_mac_list = 00:00:00:30:21:01 00:00:00:30:21:00
-
-----------------------
-Firewall Run commands
-----------------------
-Update the configuration according to system configuration.
-
-::
-
- ./vFW -p <port mask> -f <config> -s <script> - SW_LoadB
- ./vFW -p <port mask> -f <config> -s <script> -hwlb <num_WT> - HW_LoadB
-
-Run IPv4
-----------
-To run the vFW in Software LB or Hardware LB with IPv4 traffic
-
-::
-
-  Software LoadB:
-
-  cd <samplevnf>/VNFs/vFW/
-  ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg  -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc
-
-
-  Hardware LoadB:
-
-  cd <samplevnf>/VNFs/vFW/
-  ./build/vFW -p 0x3 -f ./config/VFW_HWLB_IPV4_SinglePortPair_4Thread.cfg  -s ./config/VFW_HWLB_IPV4_SinglePortPair_script.cfg --hwlb 4
-
-Run IPv6
----------
-To run the vFW in Software LB or Hardware LB with IPvr64 traffic
-
-::
-
-  Software LoadB:
-
-  cd <samplevnf>/VNFs/vFW
-  ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV6_SinglePortPair_4Thread.cfg  -s ./config/VFW_SWLB_IPV6_SinglePortPair_script.tc
-
-
-  Hardware LoadB:
-
-  cd <samplevnf>/VNFs/vFW/
-  ./build/vFW -p 0x3 -f ./config/VFW_HWLB_IPV6_SinglePortPair_4Thread.cfg  -s ./config/VFW_HWLB_IPV6_SinglePortPair_script.tc --hwlb 4
-
-vFW execution on BM & SRIOV
----------------------------
-To run the VNF, execute the following
-
-::
-
-  samplevnf/VNFs/vFW# ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg  -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vFW configuration file
-  -s SCRIPT FILE: vFW script file
-
-vFW execution on OVS
---------------------
-
-::
-
-  To run the VNF, execute the following:
-  samplevnf/VNFs/vFW# ./build/vFW -p 0x3 -f ./config/VFW_SWLB_IPV4_SinglePortPair_4Thread.cfg  -s ./config/VFW_SWLB_IPV4_SinglePortPair_script.tc --disable-hw-csum
-  Command Line Params:
-  -p PORTMASK: Hexadecimal bitmask of ports to configure
-  -f CONFIG FILE: vFW configuration file
-  -s SCRIPT FILE: vFW script file
-  --disable-hw-csum :Disable TCP/UDP hw checksum
diff --git a/docs/testing/user/userguide/vFW/README.rst b/docs/testing/user/userguide/vFW/README.rst
deleted file mode 100644
index cc3c2b40..00000000
--- a/docs/testing/user/userguide/vFW/README.rst
+++ /dev/null
@@ -1,182 +0,0 @@
-.. This work is licensed under a creative commons attribution 4.0 international
-.. license.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) opnfv, national center of scientific research "demokritos" and others.
-
-========================================================
-vFW - Readme
-========================================================
-
-Introduction
-===============
-The virtual firewall (vFW) is an application implements Firewall. vFW is used
-as a barrier between secure internal and an un-secure external network. The
-firewall performs Dynamic Packet Filtering. This involves keeping track of the
-state of Layer 4 (Transport)traffic,by examining both incoming and outgoing
-packets over time. Packets which don't fall within expected parameters given
-the state of the connection are discarded. The Dynamic Packet Filtering will
-be performed by Connection Tracking component, similar to that supported in
-linux. The firewall also supports Access Controlled List(ACL) for rule based
-policy enforcement. Firewall is built on top of DPDK and uses the packet library.
-
-----------
-About DPDK
-----------
-The DPDK IP Pipeline Framework provides a set of libraries to build a pipeline
-application. In this document, vFW will be explained in detail with its own
-building blocks.
-
-This document assumes the reader possesses the knowledge of DPDK concepts and
-packet framework. For more details, read DPDK Getting Started Guide, DPDK
-Programmers Guide, DPDK Sample Applications Guide.
-
-Scope
-==========
-This application provides a standalone DPDK based high performance vFW Virtual
-Network Function implementation.
-
-Features
-===========
-The vFW VNF currently supports the following functionality:
-  • Basic packet filtering (malformed packets, IP fragments)
-  • Connection tracking for TCP and UDP
-  • Access Control List for rule based policy enforcement
-  • SYN-flood protection via Synproxy* for TCP
-  • UDP, TCP and ICMP protocol pass-through
-  • CLI based enable/disable connection tracking, synproxy, basic packet
-    filtering
-  • Multithread support
-  • Multiple physical port support
-  • Hardware and Software Load Balancing
-  • L2L3 stack support for ARP/ICMP handling
-  • ARP (request, response, gratuitous)
-  • ICMP (terminal echo, echo response, passthrough)
-  • ICMPv6 and ND (Neighbor Discovery)
-
-High Level Design
-====================
-The Firewall performs basic filtering for malformed packets and dynamic packet
-filtering incoming packets using the connection tracker library.
-The connection data will be stored using a DPDK hash table. There will be one
-entry in the hash table for each connection. The hash key will be based on source
-address/port,destination address/port, and protocol of a packet. The hash key
-will be processed to allow a single entry to be used, regardless of which
-direction the packet is flowing (thus changing the source and destination).
-The ACL is implemented as libray stattically linked to vFW, which is used for
-used for rule based packet filtering.
-
-TCP connections and UDP pseudo connections will be tracked separately even if
-theaddresses and ports are identical. Including the protocol in the hash key
-will ensure this.
-
-The Input FIFO contains all the incoming packets for vFW filtering.  The vFW
-Filter has no dependency on which component has written to the Input FIFO.
-Packets will be dequeued from the FIFO in bulk for processing by the vFW.
-Packets will be enqueued to the output FIFO.
-The software or hardware loadbalancing can be used for traffic distribution
-across multiple worker threads. The hardware loadbalancing require ethernet
-flow director support from hardware (eg. Fortville x710 NIC card).
-The Input and Output FIFOs will be implemented using DPDK Ring Buffers.
-
-Components of vFW
-====================
-
-In vFW, each component is constructed using packet framework pipelines.
-It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and
-vfw worker pipeline components. A Pipeline framework is a collection of input
-ports, table(s),output ports and actions (functions).
-
----------------------------
-Receive and Transmit Driver
----------------------------
-Packets will be received in bulk and provided to LoadBalancer(LB) thread.
-Transimit takes packets from worker threads in a dedicated ring and sent to
-hardware queue.
-
----------------------------
-Master Pipeline
----------------------------
-The Master component is part of all the IP Pipeline applications. This component
-does not process any packets and should configure with Core 0, to allow
-other cores for processing of the traffic. This component is responsible for
-1. Initializing each component of the Pipeline application in different threads
-2. Providing CLI shell for the user control/debug
-3. Propagating the commands from user to the corresponding components
-
-------------------
-ARPICMP Pipeline
-------------------
-This pipeline processes the APRICMP packets.
-
----------------
-TXRX Pipelines
----------------
-The TXTX and RXRX pipelines are pass through pipelines to forward both ingress
-and egress traffic to Loadbalancer. This is required when the Software
-Loadbalancer is used.
-
-----------------------
-Load Balancer Pipeline
-----------------------
-The vFW support both hardware and software balancing for load balancing of
-traffic across multiple VNF threads. The Hardware load balancing require support
-from hardware like Flow Director for steering of packets to application through
-hardware queues.
-
-The Software Load balancer is also supported if hardware load balancing can't be
-used for any reason. The TXRX along with LOADB pipeline provides support for
-software load balancing by distributing the flows to Multiple vFW worker
-threads.
-Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src
-port, dest addr, dest port and protocol) applying an XOR logic distributing to
-active worker threads, thereby maintaining an affinity of flows to worker
-threads.
-
----------------
-vFW Pipeline
----------------
-The vFW performs the basic packet filtering and will drop the invalid and
-malformed packets.The Dynamic packet filtering done using the connection tracker
-library. The packets are processed in bulk and Hash table is used to maintain
-the connection details.
-Every TCP/UDP packets are passed through connection tracker library for valid
-connection. The ACL library integrated to firewall provide rule based filtering.
-
-------------------------
-vFW Topology
-------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 1) IXIA
-  operation:
-  Egress --> The packets sent out from ixia(port 0) will be Firewalled to ixia(port 1).
-  Igress --> The packets sent out from ixia(port 1) will be Firewalled to ixia(port 0).
-
-------------------------------------
-vFW Topology (L4REPLAY)
-------------------------------------
-
-::
-
-  IXIA(Port 0)-->(Port 0)VNF(Port 1)-->(Port 0)L4REPLAY
-  operation:
-  Egress --> The packets sent out from ixia will pass through vFW to L3FWD/L4REPLAY.
-  Ingress --> The L4REPLAY upon reception of packets (Private to Public Network),
-  will immediately replay back the traffic to IXIA interface. (Pub -->Priv).
-
---------------------
-How to run L4Replay
---------------------
-After the installation of samplevnf
-
-::
-
- go to <samplevnf/VNFs/L4Replay>
- ./buid/L4replay -c  core_mask -n no_of_channels(let it be as 2) -- -p PORT_MASK --config="(port,queue,lcore)"
-     eg: ./L4replay -c 0xf -n 4 -- -p 0x3 --config="(0,0,1)"
-
-Installation, Compile and Execution
-====================================
-Plase refer to <samplevnf>/docs/vFW/INSTALL.rst for installation, configuration,
-compilation and execution.
diff --git a/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst b/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst
deleted file mode 100644
index 540f671d..00000000
--- a/docs/testing/user/userguide/vFW/RELEASE_NOTES.rst
+++ /dev/null
@@ -1,92 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others.
-
-=========================================================
-vFW - Release Notes
-=========================================================
-
-Introduction
-================
-
-This is a beta release for Sample Virtual Firewall VNF.
-This vFW can application can be run independently (refer INSTALL.rst).
-
-User Guide
-===============
-Refer to README.rst for further details on vFW, HLD, features supported, test
-plan. For build configurations and execution requisites please refer to
-INSTALL.rst.
-
-Feature for this release
-===========================
-This release supports following features as part of vFW
-
-  - Basic packet filtering (malformed packets, IP fragments)
-  - Connection tracking for TCP and UDP
-  - Access Control List for rule based policy enforcement
-  - SYN-flood protection via Synproxy* for TCP
-  - UDP, TCP and ICMP protocol pass-through
-  - CLI based enable/disable connection tracking, synproxy, basic packet
-    filtering
-  - L2L3 stack support for ARP/ICMP handling
-  - ARP (request, response, gratuitous)
-  - ICMP (terminal echo, echo response, passthrough)
-  - ICMPv6 and ND (Neighbor Discovery)
-  - Hardware and Software Load Balancing
-  - Multithread support
-  - Multiple physical port support
-
-System requirements - OS and kernel version
-==============================================
-This is supported on Ubuntu 14.04 and Ubuntu 16.04 and kernel version less than 4.5
-
-   VNFs on BareMetal support:
-                OS: Ubuntu 14.04 or 16.04 LTS
-                kernel: < 4.5
-                http://releases.ubuntu.com/16.04/
-                Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-   VNFs on Standalone Hypervisor:
-                HOST OS: Ubuntu 14.04 or 16.04 LTS
-                http://releases.ubuntu.com/16.04/
-                Download/Install the image: ubuntu-16.04.1-server-amd64.iso
-
-             -   OVS (DPDK) - 2.5
-             -   kernel: < 4.5
-             -   Hypervisor - KVM
-             -   VM OS - Ubuntu 16.04/Ubuntu 14.04
-
-Known Bugs and limitations
-=============================
-
- - Hadware Load Balancer feature is supported on fortville nic FW version 4.53 and below.
- - Hardware Checksum offload is not supported for IPv6 traffic.
- - vFW on sriov is tested upto 4 threads
- - Http Multiple clients/server with HWLB is not working
-
-Future Work
-==============
-Following would be possible enhancement functionalities
-
- - Automatic enable/disable of synproxy
- - Support TCP timestamps with synproxy
- - FTP ALG integration
- - Performance optimization on different platforms
-
-References
-=============
-Following links provides additional information for differenet version of DPDKs
-
-.. _QUICKSTART:
-         http://dpdk.org/doc/guides-16.04/linux_gsg/quick_start.html
-         http://dpdk.org/doc/guides-16.11/linux_gsg/quick_start.html
-         http://dpdk.org/doc/guides-17.02/linux_gsg/quick_start.html
-         http://dpdk.org/doc/guides-17.05/linux_gsg/quick_start.html
-
-.. _DPDKGUIDE:
-         http://dpdk.org/doc/guides-16.04/prog_guide/index.html
-         http://dpdk.org/doc/guides-16.11/prog_guide/index.html
-         http://dpdk.org/doc/guides-17.02/prog_guide/index.html
-         http://dpdk.org/doc/guides-17.05/prog_guide/index.html
diff --git a/docs/testing/user/userguide/vFW/index.rst b/docs/testing/user/userguide/vFW/index.rst
deleted file mode 100644
index 8b6a8186..00000000
--- a/docs/testing/user/userguide/vFW/index.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-####################
-vFW samplevnf
-####################
-
-.. toctree::
-   :numbered:
-   :maxdepth: 2
-
-   RELEASE_NOTES.rst
-   README.rst
-   INSTALL.rst
-- 
cgit 1.2.3-korg