From 039ac41531956a733ed96f7c715ed072e724e0df Mon Sep 17 00:00:00 2001 From: Anand B Jyoti Date: Wed, 4 Oct 2017 08:26:56 +0530 Subject: Docs: Enhance the userguide with CLI command reference JIRA: SAMPLEVNF-84 Update the documents with CLI command reference and Resolve the jenkins build warnings. Change-Id: I2bf22507758e1a13b648cc40d86495581fe0d981 Signed-off-by: Anand B Jyoti --- docs/testing/user/userguide/07-Config_files.rst | 84 ++++++++++++------------- 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'docs/testing/user/userguide/07-Config_files.rst') diff --git a/docs/testing/user/userguide/07-Config_files.rst b/docs/testing/user/userguide/07-Config_files.rst index 6ad6c6fb..9061ee57 100644 --- a/docs/testing/user/userguide/07-Config_files.rst +++ b/docs/testing/user/userguide/07-Config_files.rst @@ -7,14 +7,14 @@ SampleVNF - Config files ======================== The configuration files are created based on the DUT test scenarios. -The example reference files are provided as part of the VNFs in the +The example reference files are provided as part of the VNFs in the config folder. Following parameters will define the config files. -1. Loadbalancing: Hardware or Software +1. Load balancing type: Hardware or Software 2. Traffic type: IPv4 or IPv6 -3. Number of Ports: pairs: Single port or Multi-Port +3. Number of Port Pairs: Single or Multi Following are the example configuration files for sampleVNFs. @@ -31,7 +31,7 @@ The reference configuration files explained here are for Software and Hardware loadbalancing with IPv4 traffic type and single port pair. For other configurations liek IPv6 and Multi-port, refer to example config files provided as part of the source code in config(VNFs/vFW/config) folder -of the VNFs. +of the VNFs. 1. SWLB, IPv4, Single Port Pair, 4WT: @@ -40,35 +40,35 @@ of the VNFs. [PIPELINE0] type = MASTER core = 0 - + [PIPELINE1] type = ARPICMP core = 0 - + pktq_in = SWQ2 pktq_out = TXQ0.0 TXQ1.0 - + ; IPv4 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x ; arp_route_tbl = (ac102814,ff000000,1,ac102814) (ca106414,ff000000,0,ca106414) - + ; IPv6 ARP route table entries (dst_ip, mask, if_port, nh) hex values with no 0x ;nd_route_tbl = (fec0::6a05:caff:fe30:21b0,64,0,fec0::6a05:caff:fe30:21b0) ;nd_route_tbl = (2012::6a05:caff:fe30:2081,64,1,2012::6a05:caff:fe30:2081) - + ; egress (private interface) info pktq_in_prv = RXQ0.0 - + ;for pub port <-> prv port mapping (prv, pub) prv_to_pub_map = (0,1) prv_que_handler = (0) - + [PIPELINE2] type = TXRX core = 1 pktq_in = RXQ0.0 RXQ1.0 pktq_out = SWQ0 SWQ1 SWQ2 pipeline_txrx_type = RXRX - + [PIPELINE3] type = LOADB core = 2 @@ -79,13 +79,13 @@ of the VNFs. prv_que_handler = (0) n_lb_tuples = 5 ; tuple(src_ip,dst_ip, src_port, dst_port, protocol) ;loadb_debug = 0 - + [PIPELINE4] type = VFW core = 3 pktq_in = SWQ3 SWQ4 pktq_out = SWQ11 SWQ12;TXQ0.0 TXQ1.0 - + n_rules = 4096 ; Max number of ACL rules ;n_flows gets round up to power of 2 n_flows = 1048576 ; Max number of connections/flows per vFW WT @@ -97,13 +97,13 @@ of the VNFs. ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 ; UDP timeouts for unreplied traffic udp_replied = 180 ; UDP timeout for replied traffic - + [PIPELINE5] type = VFW core = 4 pktq_in = SWQ5 SWQ6 pktq_out = SWQ13 SWQ14;TXQ0.0 TXQ1.0 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 @@ -115,13 +115,13 @@ of the VNFs. ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE6] type = VFW core = 5 pktq_in = SWQ7 SWQ8 pktq_out = SWQ15 SWQ16 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 @@ -133,24 +133,24 @@ of the VNFs. ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE7] type = VFW core = 6 pktq_in = SWQ9 SWQ10 pktq_out = SWQ17 SWQ18 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 - traffic_type = 4 ; IPv4 Traffic + traffic_type = 4 ; IPv4 Traffic ;traffic_type = 6 ; IPv6 Traffic ; tcp_time_wait controls timeout for closed connection, normally 120 tcp_time_wait = 10 tcp_be_liberal = 0 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE8] type = TXRX core = 1h @@ -168,30 +168,30 @@ This configuration doesn't require LOADB and TXRX pipelines [PIPELINE0] type = MASTER core = 0 - + [PIPELINE1] type = ARPICMP core = 0 pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 pktq_out = TXQ0.0 TXQ1.0 - + ; egress (private interface) info pktq_in_prv = RXQ0.0 - + ;for pub port <-> prv port mapping (prv, pub) prv_to_pub_map = (0,1) prv_que_handler = (0) - + [PIPELINE2] type = VFW core = 1 pktq_in = RXQ0.0 RXQ1.0 pktq_out = TXQ0.1 TXQ1.1 SWQ0 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 - + traffic_type = 4 ; IPv4 Traffic ;traffic_type = 6 ; IPv6 Traffic ; tcp_time_wait controls timeout for closed connection, normally 120 @@ -200,17 +200,17 @@ This configuration doesn't require LOADB and TXRX pipelines ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE3] type = VFW core = 2 pktq_in = RXQ0.1 RXQ1.1 pktq_out = TXQ0.2 TXQ1.2 SWQ1 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 - + traffic_type = 4 ; IPv4 Traffic ;traffic_type = 6 ; IPv6 Traffic ; tcp_time_wait controls timeout for closed connection, normally 120 @@ -219,17 +219,17 @@ This configuration doesn't require LOADB and TXRX pipelines ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE4] type = VFW core = 3 pktq_in = RXQ0.2 RXQ1.2 pktq_out = TXQ0.3 TXQ1.3 SWQ2 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 - + traffic_type = 4 ; IPv4 Traffic ;traffic_type = 6 ; IPv6 Traffic ; tcp_time_wait controls timeout for closed connection, normally 120 @@ -238,17 +238,17 @@ This configuration doesn't require LOADB and TXRX pipelines ;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180 udp_unreplied = 180 udp_replied = 180 - + [PIPELINE5] type = VFW core = 4 pktq_in = RXQ0.3 RXQ1.3 pktq_out = TXQ0.4 TXQ1.4 SWQ3 - + n_rules = 4096 ;n_flows gets round up to power of 2 n_flows = 1048576 - + traffic_type = 4 ; IPv4 Traffic ;traffic_type = 6 ; IPv6 Traffic ; tcp_time_wait controls timeout for closed connection, normally 120 @@ -266,7 +266,7 @@ The reference configuration files explained here are for Software and Hardware loadbalancing with IPv4 traffic type and single port pair. For other configurations liek IPv6 and Multi-port, refer to example config files provided as part of the source code in config(VNFs/vACL/config) folder -of the VNFs. +of the VNFs. 1. SWLB, IPv4, Single Port Pair, 1 WT: @@ -276,7 +276,7 @@ of the VNFs. # add pci whitelist eg below w = 05:00.0 ; Network Ports binded to dpdk w = 05:00.1 ; Network Ports binded to dpdk - + [PIPELINE0] type = MASTER core = 0 @@ -289,7 +289,7 @@ of the VNFs. pktq_in_prv = RXQ0.0 prv_to_pub_map = (0,1) prv_que_handler = (0) - + [PIPELINE2] type = TXRX core = 1 @@ -327,13 +327,13 @@ of the VNFs. 2. SWLB, IPv4, Single Port Pair, 1 WT: - :: + :: [EAL] # add pci whitelist eg below w = 05:00.0 w = 05:00.1 - + [PIPELINE0] type = MASTER core = 0 -- cgit 1.2.3-korg