From 9d4e94ed8cbd2110cab0388181bad3223a1155ce Mon Sep 17 00:00:00 2001 From: Luc Provoost Date: Mon, 11 May 2020 05:06:17 -0400 Subject: createrapid.py is now using heat templates yaml yaml files have been added to the repo as an example. Please check the README explaining the output section reqs for this yaml file. There is also a new file (config_file): it also specifies which yaml files to use. multiple dataplane interfaces per VM can now be specified and will appear in the .env file. An error in setting the packet size has been fixed (see set_udp_packet_size for packet size setting details) Change-Id: Ie89a4940521dac7dd3652acca477739abb9f5497 Signed-off-by: Luc Provoost --- VNFs/DPPD-PROX/helper-scripts/rapid/README | 72 ++-- .../rapid/check_prox_system_setup.sh | 2 + VNFs/DPPD-PROX/helper-scripts/rapid/config_file | 8 + VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py | 437 +++------------------ .../helper-scripts/rapid/deploycentostools.sh | 14 +- VNFs/DPPD-PROX/helper-scripts/rapid/irq.test | 2 + .../helper-scripts/rapid/openstack-rapid.yaml | 117 ++++++ .../helper-scripts/rapid/params_rapid.yaml | 5 + VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py | 1 + .../rapid/rapid-openstack-server.yaml | 82 ++++ .../helper-scripts/rapid/rapid_flowsizetest.py | 2 +- .../rapid/rapid_generator_machine.py | 12 +- VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py | 9 +- .../DPPD-PROX/helper-scripts/rapid/rapid_parser.py | 48 +-- VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py | 18 +- .../DPPD-PROX/helper-scripts/rapid/sharkproxlog.sh | 14 +- .../helper-scripts/rapid/stackdeployment.py | 145 +++++++ 17 files changed, 523 insertions(+), 465 deletions(-) create mode 100644 VNFs/DPPD-PROX/helper-scripts/rapid/config_file create mode 100644 VNFs/DPPD-PROX/helper-scripts/rapid/openstack-rapid.yaml create mode 100644 VNFs/DPPD-PROX/helper-scripts/rapid/params_rapid.yaml create mode 100644 VNFs/DPPD-PROX/helper-scripts/rapid/rapid-openstack-server.yaml create mode 100755 VNFs/DPPD-PROX/helper-scripts/rapid/stackdeployment.py diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/README b/VNFs/DPPD-PROX/helper-scripts/rapid/README index b88bd7e3..ab6e44f2 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/README +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/README @@ -76,20 +76,36 @@ https://www.packer.io/docs/builders/openstack.html Note that this procedure is not only installing the necessary tools to run PROX, but also does some system optimizations (tuned). Check deploycentostools.sh for more details. -Now you can run the createrapid.py file. Use help for more info on the usage: - # ./createrapid.py --help - -createrapid.py will use the OpenStack CLI to create the flavor, key-pair, network, image, -servers, ... -It will create a .env file containing all info that will be used by runrapid.py -to actually run the tests. Logging can be found in the CREATE.log file -You can use floating IP addresses by specifying the floating IP network ---floating_network NETWORK -or directly connect through the INTERNAL_NETWORK by using the following parameter: ---floating_network NO -/etc/resolv.conf will contain DNS info from the "best" interface. Since we are -deploying VMs with multiple interface on different networks, this info might be -taken from the "wrong" network (e.g. the dataplane network). +Now you need to create a stack, that will deploy the PROX VMs using the PROX +image built in the previous step. The stack needs to have an ouput section +with the following outputs: +outputs: + number_of_servers: + value: + - # A list of + server_name: + value: + - - # A list containing a list of + data_plane_ips: + value: + - - # A list containing a list of + data_plane_macs: + value: + - - # A list containing a list of + mngmt_ips: + value: + - - # A list containing a list of +where + * is an int + * is a string + * is a list of strings + * is a list of strings + * is a string + +createrapid.py will take the input from config_file, to create an ssh keypair +and stack (if not already existing). The tool will use the yaml files as +specified in the config_file and create a .env file, containing +input used for runrapid.py. Now you can run the runrapid.py file. Use help for more info on the usage: # ./runrapid.py --help @@ -114,8 +130,6 @@ openstack subnet create --network fast-network --subnet-range 20.20.20.0/24 -- openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port1 openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port2 openstack port create --network fast-network --vnic-type direct --fixed-ip subnet=fast-subnet Port3 -Make sure to use the network and subnet in the createrapid parameters list. Port1, Port2 and Port3 -are being used in the *.env file. Note when doing tests using the gateway functionality on OVS: When a GW VM is sending packets on behalf of another VM (e.g. the generator), we need to make sure the OVS @@ -130,9 +144,9 @@ neutron port-update xxxxxx --port_security_enabled=False An example of the env file generated by createrapid.py can be found below. Note that this file can be created manually in case the stack is created in a -different way (not using the createrapid.py). This can be useful in case you are -not using OpenStack as a VIM or when using special configurations that cannot be -achieved using createrapid.py. Fields needed for runrapid are: +different way than what is described in this text. This can be useful in case +you are not using OpenStack as a VIM or when using special configurations that +cannot be achieved using createrapid.py. Fields needed for runrapid are: * all info in the [Mx] sections * the key information in the [ssh] section * the total_number_of_vms information in the [rapid] section @@ -145,20 +159,20 @@ total_number_of_machines = 3 [M1] name = rapid-VM1 admin_ip = 10.25.1.109 -dp_ip = 10.10.10.4 -dp_mac = fa:16:3e:25:be:25 +dp_ip1 = 10.10.10.4 +dp_mac1 = fa:16:3e:25:be:25 [M2] name = rapid-VM2 admin_ip = 10.25.1.110 -dp_ip = 10.10.10.7 -dp_mac = fa:16:3e:72:bf:e8 +dp_ip1 = 10.10.10.7 +dp_mac1 = fa:16:3e:72:bf:e8 [M3] name = rapid-VM3 admin_ip = 10.25.1.125 -dp_ip = 10.10.10.15 -dp_mac = fa:16:3e:69:f3:e7 +dp_ip1 = 10.10.10.15 +dp_mac1 = fa:16:3e:69:f3:e7 [ssh] key = prox.pem @@ -167,11 +181,3 @@ user = centos [Varia] vim = OpenStack stack = rapid -vms = rapid.vms -image = rapidVM -image_file = rapidVM.qcow2 -dataplane_network = dataplane-network -subnet = dpdk-subnet -subnet_cidr = 10.10.10.0/24 -internal_network = admin_internal_net -floating_network = admin_floating_net diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/check_prox_system_setup.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/check_prox_system_setup.sh index ad297b44..8621d1f3 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/check_prox_system_setup.sh +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/check_prox_system_setup.sh @@ -26,6 +26,8 @@ then case $line in isolated_cores=1-$MAXCOREID*) echo "Isolated CPU(s) OK, no reboot: $line">>$logfile + sed -i 's/PubkeyAuthentication no/PubkeyAuthentication yes/g' /etc/ssh/sshd_config + service sshd restart modprobe uio insmod /home/centos/dpdk/build/kmod/igb_uio.ko exit 0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/config_file b/VNFs/DPPD-PROX/helper-scripts/rapid/config_file new file mode 100644 index 00000000..5e77e31e --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/config_file @@ -0,0 +1,8 @@ +[OpenStack] +cloud_name = openstackL6 +stack_name = rapid +heat_template = openstack-rapid.yaml +heat_param = params_rapid.yaml +keypair_name = prox_key +user = centos +push_gateway = None diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py index a7b1ec6c..efdf5e1f 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py @@ -1,7 +1,7 @@ #!/usr/bin/python ## -## Copyright (c) 2010-2019 Intel Corporation +## Copyright (c) 2010-2020 Intel Corporation ## ## Licensed under the Apache License, Version 2.0 (the "License"); ## you may not use this file except in compliance with the License. @@ -15,392 +15,51 @@ ## See the License for the specific language governing permissions and ## limitations under the License. ## - -from __future__ import print_function - -import os -import stat -import sys -import time -import subprocess -import getopt -import re -import logging -from logging.handlers import RotatingFileHandler -from logging import handlers -import ConfigParser - -version="19.11.21" -stack = "rapid" #Default string for stack. This is not an OpenStack Heat stack, just a group of VMs -vms = "rapid.vms" #Default string for vms file -key = "prox" # default name for key -image = "rapidVM" # default name for the image -image_file = "rapidVM.qcow2" -dataplane_network = "dataplane-network" # default name for the dataplane network -subnet = "dpdk-subnet" #subnet for dataplane -subnet_cidr="10.10.10.0/24" # cidr for dataplane -internal_network="admin_internal_net" -floating_network="admin_floating_net" -loglevel="DEBUG" # sets log level for writing to file - -def usage(): - print("usage: createrapid [--version] [-v]") - print(" [--stack STACK_NAME]") - print(" [--vms VMS_FILE]") - print(" [--key KEY_NAME]") - print(" [--image IMAGE_NAME]") - print(" [--image_file IMAGE_FILE]") - print(" [--dataplane_network DP_NETWORK]") - print(" [--subnet DP_SUBNET]") - print(" [--subnet_cidr SUBNET_CIDR]") - print(" [--internal_network ADMIN_NETWORK]") - print(" [--floating_network FLOATING_NETWORK]") - print(" [--log DEBUG|INFO|WARNING|ERROR|CRITICAL]") - print(" [-h] [--help]") - print("") - print("Command-line interface to createrapid") - print("") - print("optional arguments:") - print(" -v, --version Show program's version number and exit") - print(" --stack STACK_NAME Specify a name for the stack. Default is %s."%stack) - print(" --vms VMS_FILE Specify the vms file to be used. Default is %s."%vms) - print(" --key KEY_NAME Specify the key to be used. Default is %s."%key) - print(" --image IMAGE_NAME Specify the image to be used. Default is %s."%image) - print(" --image_file IMAGE_FILE Specify the image qcow2 file to be used. Default is %s."%image_file) - print(" --dataplane_network NETWORK Specify the network name to be used for the dataplane. Default is %s."%dataplane_network) - print(" --subnet DP_SUBNET Specify the subnet name to be used for the dataplane. Default is %s."%subnet) - print(" --subnet_cidr SUBNET_CIDR Specify the subnet CIDR to be used for the dataplane. Default is %s."%subnet_cidr) - print(" --internal_network NETWORK Specify the network name to be used for the control plane. Default is %s."%internal_network) - print(" --floating_network NETWORK Specify the external floating ip network name. Default is %s. NO if no floating ip used."%floating_network) - print(" --log Specify logging level for log file output, screen output level is hard coded") - print(" -h, --help Show help message and exit.") - print("") - +from rapid_log import RapidLog +from stackdeployment import StackDeployment try: - opts, args = getopt.getopt(sys.argv[1:], "vh", ["version","help", "vms=","stack=","key=","image=","image_file=","dataplane_network=","subnet=","subnet_cidr=","internal_network=","floating_network=","log="]) -except getopt.GetoptError as err: - print("===========================================") - print(str(err)) - print("===========================================") - usage() - sys.exit(2) -if args: - usage() - sys.exit(2) -for opt, arg in opts: - if opt in ["-h", "--help"]: - usage() - sys.exit() - if opt in ["-v", "--version"]: - print("Rapid Automated Performance Indication for Dataplane "+version) - sys.exit() - if opt in ["--stack"]: - stack = arg - print ("Using '"+stack+"' as name for the stack") - elif opt in ["--vms"]: - vms = arg - print ("Using Virtual Machines Description: "+vms) - elif opt in ["--key"]: - key = arg - print ("Using key: "+key) - elif opt in ["--image"]: - image = arg - print ("Using image: "+image) - elif opt in ["--image_file"]: - image_file = arg - print ("Using qcow2 file: "+image_file) - elif opt in ["--dataplane_network"]: - dataplane_network = arg - print ("Using dataplane network: "+ dataplane_network) - elif opt in ["--subnet"]: - subnet = arg - print ("Using dataplane subnet: "+ subnet) - elif opt in ["--subnet_cidr"]: - subnet_cidr = arg - print ("Using dataplane subnet: "+ subnet_cidr) - elif opt in ["--internal_network"]: - internal_network = arg - print ("Using control plane network: "+ internal_network) - elif opt in ["--floating_network"]: - floating_network = arg - print ("Using floating ip network: "+ floating_network) - elif opt in ["--log"]: - loglevel = arg - print ("Log level: "+ loglevel) - - -# create formatters -screen_formatter = logging.Formatter("%(message)s") -file_formatter = logging.Formatter("%(asctime)s - %(levelname)s - %(message)s") - -# get a top-level logger, -# set its log level, -# BUT PREVENT IT from propagating messages to the root logger -# -log = logging.getLogger() -numeric_level = getattr(logging, loglevel.upper(), None) -if not isinstance(numeric_level, int): - raise ValueError('Invalid log level: %s' % loglevel) -log.setLevel(numeric_level) -log.propagate = 0 - -# create a console handler -# and set its log level to the command-line option -# -console_handler = logging.StreamHandler(sys.stdout) -console_handler.setLevel(logging.INFO) -console_handler.setFormatter(screen_formatter) - -# create a file handler -# and set its log level to DEBUG -# -log_file = 'CREATE' +stack +'.log' -file_handler = logging.handlers.RotatingFileHandler(log_file, backupCount=10) -#file_handler = log.handlers.TimedRotatingFileHandler(log_file, 'D', 1, 5) -file_handler.setLevel(numeric_level) -file_handler.setFormatter(file_formatter) - -# add handlers to the logger -# -log.addHandler(file_handler) -log.addHandler(console_handler) - -# Check if log exists and should therefore be rolled -needRoll = os.path.isfile(log_file) - - -# This is a stale log, so roll it -if needRoll: - # Add timestamp - log.debug('\n---------\nLog closed on %s.\n---------\n' % time.asctime()) - # Roll over on application start - log.handlers[0].doRollover() - -# Add timestamp -log.debug('\n---------\nLog started on %s.\n---------\n' % time.asctime()) - -log.debug("createrapid.py version: "+version) -# Checking if the control network already exists, if not, stop the script -log.debug("Checking control plane network: " + internal_network) -cmd = 'openstack network list -f value -c Name' -log.debug (cmd) -Networks = subprocess.check_output(cmd , shell=True).decode().strip() -if internal_network in Networks: - log.info("Control plane network (" + internal_network+") already active") -else: - log.exception("Control plane network " + internal_network + " not existing") - raise Exception("Control plane network " + internal_network + " not existing") - -# Checking if the floating ip network should be used. If yes, check if it exists and stop the script if it doesn't -if floating_network !='NO': - log.debug("Checking floating ip network: " + floating_network) - if floating_network in Networks: - log.info("Floating ip network (" + floating_network + ") already active") - else: - log.exception("Floating ip network " + floating_network + " not existing") - raise Exception("Floating ip network " + floating_network + " not existing") - -# Checking if the dataplane network already exists, if not create it -log.debug("Checking dataplane network: " + dataplane_network) -if dataplane_network in Networks: - # If the dataplane already exists, we are assuming that this network is already created before with the proper configuration, hence we do not check if the subnet is created etc... - log.info("Dataplane network (" + dataplane_network + ") already active") - subnet = "n/a: was already existing" - subnet_cidr = "n/a, was already existing" -else: - log.info('Creating dataplane network ...') - cmd = 'openstack network create '+dataplane_network+' -f value -c status' - log.debug(cmd) - NetworkExist = subprocess.check_output(cmd , shell=True).decode().strip() - if 'ACTIVE' in NetworkExist: - log.info("Dataplane network created") - # Checking if the dataplane subnet already exists, if not create it - log.debug("Checking subnet: "+subnet) - cmd = 'openstack subnet list -f value -c Name' - log.debug (cmd) - Subnets = subprocess.check_output(cmd , shell=True).decode().strip() - if subnet in Subnets: - log.info("Subnet (" +subnet+ ") already exists") - subnet = "n/a, was already existing" - subnet_cidr = "n/a, was already existing" - else: - log.info('Creating subnet ...') - cmd = 'openstack subnet create --network ' + dataplane_network + ' --subnet-range ' + subnet_cidr +' --gateway none ' + subnet+' -f value -c name' - log.debug(cmd) - Subnets = subprocess.check_output(cmd , shell=True).decode().strip() - if subnet in Subnets: - log.info("Subnet created") - else : - log.exception("Failed to create subnet: " + subnet) - raise Exception("Failed to create subnet: " + subnet) - else : - log.exception("Failed to create dataplane network: " + dataplane_network) - raise Exception("Failed to create dataplane network: " + dataplane_network) - -# Checking if the image already exists, if not create it -log.debug("Checking image: " + image) -cmd = 'openstack image list -f value -c Name' -log.debug(cmd) -Images = subprocess.check_output(cmd , shell=True).decode().strip() -if image in Images: - log.info("Image (" + image + ") already available") - image_file="Don't know, was already existing" -else: - log.info('Creating image ...') - cmd = 'openstack image create -f value -c status --disk-format qcow2 --container-format bare --public --file ./'+image_file+ ' ' +image - log.debug(cmd) - ImageExist = subprocess.check_output(cmd , shell=True).decode().strip() - if 'active' in ImageExist: - log.info('Image created and active') -# cmd = 'openstack image set --property hw_vif_multiqueue_enabled="true" ' +image -# subprocess.check_call(cmd , shell=True) - else : - log.exception("Failed to create image") - raise Exception("Failed to create image") - -# Checking if the key already exists, if not create it -log.debug("Checking key: "+key) -cmd = 'openstack keypair list -f value -c Name' -log.debug (cmd) -KeyExist = subprocess.check_output(cmd , shell=True).decode().strip() -if key in KeyExist: - log.info("Key (" + key + ") already installed") -else: - log.info('Creating key ...') - cmd = 'openstack keypair create ' + key + '>' + key + '.pem' - log.debug(cmd) - subprocess.check_call(cmd , shell=True) - cmd = 'chmod 600 ' + key + '.pem' - subprocess.check_call(cmd, shell=True) - cmd = 'openstack keypair list -f value -c Name' - log.debug(cmd) - KeyExist = subprocess.check_output(cmd , shell=True).decode().strip() - if key in KeyExist: - log.info("Key created") - else : - log.exception("Failed to create key: " + key) - raise Exception("Failed to create key: " + key) - -ServerToBeCreated=[] -ServerName=[] -config = ConfigParser.RawConfigParser() -vmconfig = ConfigParser.RawConfigParser() -vmname = os.path.dirname(os.path.realpath(__file__))+'/' + vms -#vmconfig.read_file(open(vmname)) -vmconfig.readfp(open(vmname)) -total_number_of_VMs = vmconfig.get('DEFAULT', 'total_number_of_vms') -cmd = 'openstack server list -f value -c Name' -log.debug (cmd) -Servers = subprocess.check_output(cmd , shell=True).decode().strip() -cmd = 'openstack flavor list -f value -c Name' -log.debug (cmd) -Flavors = subprocess.check_output(cmd , shell=True).decode().strip() -for vm in range(1, int(total_number_of_VMs)+1): - flavor_info = vmconfig.get('VM%d'%vm, 'flavor_info') - flavor_meta_data = vmconfig.get('VM%d'%vm, 'flavor_meta_data') - boot_info = vmconfig.get('VM%d'%vm, 'boot_info') - SRIOV_port = vmconfig.get('VM%d'%vm, 'SRIOV_port') - SRIOV_mgmt_port = vmconfig.get('VM%d'%vm, 'SRIOV_mgmt_port') - ServerName.append('%s-VM%d'%(stack,vm)) - flavor_name = '%s-VM%d-flavor'%(stack,vm) - log.debug("Checking server: " + ServerName[-1]) - if ServerName[-1] in Servers: - log.info("Server (" + ServerName[-1] + ") already active") - ServerToBeCreated.append("no") - else: - ServerToBeCreated.append("yes") - # Checking if the flavor already exists, if not create it - log.debug("Checking flavor: " + flavor_name) - if flavor_name in Flavors: - log.info("Flavor (" + flavor_name+") already installed") - else: - log.info('Creating flavor ...') - cmd = 'openstack flavor create %s %s -f value -c name'%(flavor_name,flavor_info) - log.debug(cmd) - NewFlavor = subprocess.check_output(cmd , shell=True).decode().strip() - if flavor_name in NewFlavor: - cmd = 'openstack flavor set %s %s'%(flavor_name, flavor_meta_data) - log.debug(cmd) - subprocess.check_call(cmd , shell=True) - log.info("Flavor created") - else : - log.exception("Failed to create flavor: " + flavor_name) - raise Exception("Failed to create flavor: " + flavor_name) - if SRIOV_mgmt_port == 'NO': - nic_info = '--nic net-id=%s'%(internal_network) - else: - nic_info = '--nic port-id=%s'%(SRIOV_mgmt_port) - if SRIOV_port == 'NO': - nic_info = nic_info + ' --nic net-id=%s'%(dataplane_network) - else: - for port in SRIOV_port.split(','): - nic_info = nic_info + ' --nic port-id=%s'%(port) - if vm==int(total_number_of_VMs): - # For the last server, we want to wait for the server creation to complete, so the next operations will succeeed (e.g. IP allocation) - # Note that this waiting is not bullet proof. Imagine, we loop through all the VMs, and the last VM was already running, while the previous - # VMs still needed to be created. Or the previous server creations take much longer than the last one. - # In that case, we might be too fast when we query for the IP & MAC addresses. - wait = '--wait' - else: - wait = '' - log.info("Creating server...") - cmd = 'openstack server create --flavor %s --key-name %s --image %s %s %s %s %s'%(flavor_name,key,image,nic_info,boot_info,wait,ServerName[-1]) - log.debug(cmd) - output = subprocess.check_output(cmd , shell=True).decode().strip() -if floating_network != 'NO': - for vm in range(0, int(total_number_of_VMs)): - if ServerToBeCreated[vm] =="yes": - log.info('Creating & Associating floating IP for ('+ServerName[vm]+')...') - cmd = 'openstack server show %s -c addresses -f value |grep -Eo "%s=[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*" | cut -d"=" -f2'%(ServerName[vm],internal_network) - log.debug(cmd) - vmportIP = subprocess.check_output(cmd , shell=True).decode().strip() - cmd = 'openstack port list -c ID -c "Fixed IP Addresses" | grep %s | cut -d" " -f 2 ' %(vmportIP) - log.debug(cmd) - vmportID = subprocess.check_output(cmd , shell=True).decode().strip() - cmd = 'openstack floating ip create --port %s %s'%(vmportID,floating_network) - log.debug(cmd) - output = subprocess.check_output(cmd , shell=True).decode().strip() - -config.add_section('rapid') -config.set('rapid', 'loglevel', loglevel) -config.set('rapid', 'version', version) -config.set('rapid', 'total_number_of_machines', total_number_of_VMs) -for vm in range(1, int(total_number_of_VMs)+1): - cmd = 'openstack server show %s'%(ServerName[vm-1]) - log.debug(cmd) - output = subprocess.check_output(cmd , shell=True).decode().strip() - searchString = '.*%s=([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*)' %(dataplane_network) - matchObj = re.search(searchString, output, re.DOTALL) - vmDPIP = matchObj.group(1) - searchString = '.*%s=([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+),*\s*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)*' %(internal_network) - matchObj = re.search(searchString, output, re.DOTALL) - vmAdminIP = matchObj.group(2) - if vmAdminIP == None: - vmAdminIP = matchObj.group(1) - cmd = 'openstack port list |egrep "\\b%s\\b" | tr -s " " | cut -d"|" -f 4'%(vmDPIP) - log.debug(cmd) - vmDPmac = subprocess.check_output(cmd , shell=True).decode().strip() - config.add_section('M%d'%vm) - config.set('M%d'%vm, 'name', ServerName[vm-1]) - config.set('M%d'%vm, 'admin_ip', vmAdminIP) - config.set('M%d'%vm, 'dp_ip', vmDPIP) - config.set('M%d'%vm, 'dp_mac', vmDPmac) - log.info('%s: (admin IP: %s), (dataplane IP: %s), (dataplane MAC: %s)' % (ServerName[vm-1],vmAdminIP,vmDPIP,vmDPmac)) - -config.add_section('ssh') -config.set('ssh', 'key', key + '.pem') -config.set('ssh', 'user', 'centos') -config.add_section('Varia') -config.set('Varia', 'VIM', 'OpenStack') -config.set('Varia', 'stack', stack) -config.set('Varia', 'VMs', vms) -config.set('Varia', 'image', image) -config.set('Varia', 'image_file', image_file) -config.set('Varia', 'dataplane_network', dataplane_network) -config.set('Varia', 'subnet', subnet) -config.set('Varia', 'subnet_cidr', subnet_cidr) -config.set('Varia', 'internal_network', internal_network) -config.set('Varia', 'floating_network', floating_network) -# Writing the environment file -with open(stack+'.env', 'wb') as envfile: - config.write(envfile) + import configparser +except ImportError: + # Python 2.x fallback + import ConfigParser as configparser + +class RapidStackManager(object): + @staticmethod + def parse_config(rapid_stack_params): + config = configparser.RawConfigParser() + config.read('config_file') + section = 'OpenStack' + options = config.options(section) + for option in options: + rapid_stack_params[option] = config.get(section, option) + return (rapid_stack_params) + + @staticmethod + def deploy_stack(rapid_stack_params): + cloud_name = rapid_stack_params['cloud_name'] + stack_name = rapid_stack_params['stack_name'] + heat_template = rapid_stack_params['heat_template'] + heat_param = rapid_stack_params['heat_param'] + keypair_name = rapid_stack_params['keypair_name'] + user = rapid_stack_params['user'] + push_gateway = rapid_stack_params['push_gateway'] + deployment = StackDeployment(cloud_name) + deployment.deploy(stack_name, keypair_name, heat_template, heat_param) + deployment.generate_env_file(user, push_gateway) + +def main(): + rapid_stack_params = {} + RapidStackManager.parse_config(rapid_stack_params) + log_file = 'CREATE{}.log'.format(rapid_stack_params['stack_name']) + RapidLog.log_init(log_file, 'DEBUG', 'INFO', '2020.05.05') + #cloud_name = 'openstackL6' + #stack_name = 'rapid' + #heat_template = 'openstack-rapid.yaml' + #heat_param = 'params_rapid.yaml' + #keypair_name = 'prox_key' + #user = 'centos' + #push_gateway = None + RapidStackManager.deploy_stack(rapid_stack_params) + +if __name__ == "__main__": + main() diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh index 5e2cf3d1..2f2e6fe0 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh @@ -90,7 +90,19 @@ function os_cfg() ${SUDO} cp -r ${WORK_DIR}/check-prox-system-setup.service /etc/systemd/system/ ${SUDO} systemctl daemon-reload ${SUDO} systemctl enable check-prox-system-setup.service - + # Following lines are added to fix the following issue: When the VM gets + # instantiated, the rapid scripts will try to ssh into the VM to start + # the testing. Once the script connects with ssh, it starts downloading + # config files and then start prox, etc... The problem is that when the VM + # boots, check_prox_system_setup.sh will check for some things and + # potentially reboot, resulting in loosing the ssh connection again. + # To fix this issue, the following lines are disabling ssh access for the + # centos user. The script will not be able to connect to the VM till ssh + # access is restored after a reboot. Restoring ssh is now done by + # check-prox-system-setup.service + printf "\nMatch User centos\n" | ${SUDO} tee -a /etc/ssh/sshd_config + printf "%sPubkeyAuthentication no\n" " " | ${SUDO} tee -a /etc/ssh/sshd_config + printf "%sPasswordAuthentication no\n" " " | ${SUDO} tee -a /etc/ssh/sshd_config popd > /dev/null 2>&1 } diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/irq.test b/VNFs/DPPD-PROX/helper-scripts/rapid/irq.test index 2cf72f9b..6ab5b45c 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/irq.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/irq.test @@ -23,11 +23,13 @@ total_number_of_test_machines = 2 name = InterruptTestMachine1 config_file = irq.cfg cores = [1,2,3] +monitor = False [TestM2] name = InterruptTestMachine2 config_file = irq.cfg cores = [1,2,3] +monitor = False [test1] test=irqtest diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/openstack-rapid.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/openstack-rapid.yaml new file mode 100644 index 00000000..2dec7175 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/openstack-rapid.yaml @@ -0,0 +1,117 @@ +heat_template_version: 2015-10-15 + +description: > + Template for deploying n PROX instances. Teh template allows for deploying + multiple groups of PROX VMs. You can create a first group with certain + flavors, availability groups, etc... Another group can be created with + different characteristics. + +parameters: + public_net_name: {description: Public network to allocate (floating) IPs to VMs', type: string, default: admin_floating_net} + mgmt_net_name: {description: Name of PROX mgmt network to be created, type: string, default: admin_internal_net} + PROX_image: {description: Image name to use for PROX, type: string, default: rapidVM} + PROX_key: {description: DO NOT CHANGE THIS DEFAULT KEY NAME, type: string, default: rapid_key} + my_availability_zone: {description: availability_zone for Hosting VMs, type: string, default: nova} + security_group: {description: Security Group to use, type: string, default: prox_security_group} + PROXVM_count: {description: Total number of testVMs to create, type: number, default: 2} + PROX2VM_count: {description: Total number of testVMs to create, type: number, default: 1} + +# The following paramters are not used, but are here in case you want to also +# create the management and dataplane networks in this template + mgmt_net_cidr: {description: PROX mgmt network CIDR, type: string, default: 20.20.1.0/24} + mgmt_net_gw: {description: PROX mgmt network gateway address, type: string, default: 20.20.1.1} + mgmt_net_pool_start: {description: Start of mgmt network IP address allocation pool, type: string, default: 20.20.1.100} + mgmt_net_pool_end: {description: End of mgmt network IP address allocation pool, type: string, default: 20.20.1.200} + data_net_name: {description: Name of PROX private network to be created, type: string, default: dataplane-network} + data_net_cidr: {description: PROX private network CIDR,type: string, default: 30.30.1.0/24} + data_net_pool_start: {description: Start of private network IP address allocation pool, type: string, default: 30.30.1.100} + data_net_pool_end: {description: End of private network IP address allocation pool, type: string, default: 30.30.1.200} + dns: + type: comma_delimited_list + label: DNS nameservers + description: Comma separated list of DNS nameservers for the management network. + default: '8.8.8.8' + +resources: + PROXVMs: + type: OS::Heat::ResourceGroup + description: Group of PROX VMs according to specs described in this section + properties: + count: { get_param: PROXVM_count } + resource_def: + type: rapid-openstack-server.yaml + properties: + PROX_availability_zone : {get_param: my_availability_zone} + PROX_security_group : {get_param: security_group} + PROX_image: {get_param: PROX_image} + PROX_key: {get_param: PROX_key} + PROX_server_name: rapidVM-%index% + PROX_public_net: {get_param: public_net_name} + PROX_mgmt_net_id: {get_param: mgmt_net_name} + PROX_data_net_id: {get_param: data_net_name} + PROX_config: {get_resource: MyConfig} + depends_on: MyConfig + + PROX2VMs: + type: OS::Heat::ResourceGroup + description: Group of PROX VMs according to specs described in this section + properties: + count: { get_param: PROX2VM_count } + resource_def: + type: rapid-openstack-server.yaml + properties: + PROX_availability_zone : {get_param: my_availability_zone} + PROX_security_group : {get_param: security_group} + PROX_image: {get_param: PROX_image} + PROX_key: {get_param: PROX_key} + PROX_server_name: rapidType2VM-%index% + PROX_public_net: {get_param: public_net_name} + PROX_mgmt_net_id: {get_param: mgmt_net_name} + PROX_data_net_id: {get_param: data_net_name} + PROX_config: {get_resource: MyConfig} + depends_on: MyConfig + + MyConfig: + type: OS::Heat::CloudConfig + properties: + cloud_config: + users: + - default + - name: rapid + groups: "users,root" + lock-passwd: false + passwd: 'test' + shell: "/bin/bash" + sudo: "ALL=(ALL) NOPASSWD:ALL" + ssh_pwauth: true + chpasswd: + list: | + rapid:rapid + expire: False + +outputs: + number_of_servers: + description: List of number or PROX instance + value: + - {get_param: PROXVM_count} + - {get_param: PROX2VM_count} + server_name: + description: List of list of names of the PROX instances + value: + - {get_attr: [PROXVMs, name]} + - {get_attr: [PROX2VMs, name]} + mngmt_ips: + description: List of list of Management IPs of the VMs + value: + - {get_attr: [PROXVMs, mngmt_ip]} + - {get_attr: [PROX2VMs, mngmt_ip]} + data_plane_ips: + description: List of list of list of DataPlane IPs of the VMs + value: + - {get_attr: [PROXVMs, data_plane_ip]} + - {get_attr: [PROX2VMs, data_plane_ip]} + data_plane_macs: + description: List of list of list of DataPlane MACs of the VMs + value: + - {get_attr: [PROXVMs, data_plane_mac]} + - {get_attr: [PROX2VMs, data_plane_mac]} diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/params_rapid.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/params_rapid.yaml new file mode 100644 index 00000000..3640905a --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/params_rapid.yaml @@ -0,0 +1,5 @@ +parameters: + public_net_name: admin_floating_net + PROX_image: rapidVM + my_availability_zone: nova + security_group: prox_security_group diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py b/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py index 82faa789..6e25e7f4 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py @@ -47,6 +47,7 @@ class prox_ctrl(object): retrying, and raise RuntimeError exception otherwise. """ return self.run_cmd('true', True) + def connect(self): attempts = 1 RapidLog.debug("Trying to connect to VM which was just launched on %s, attempt: %d" % (self._ip, attempts)) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid-openstack-server.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid-openstack-server.yaml new file mode 100644 index 00000000..f1b52743 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid-openstack-server.yaml @@ -0,0 +1,82 @@ +heat_template_version: 2014-10-16 + +description: single server resource used by resource groups. + +parameters: + PROX_public_net: + type: string + PROX_mgmt_net_id: + type: string + PROX_data_net_id: + type: string + PROX_server_name: + type: string + PROX_availability_zone: + type: string + PROX_security_group: + type: string + PROX_image: + type: string + PROX_key: + type: string + PROX_config: + type: string + +resources: + PROX_instance: + type: OS::Nova::Server + properties: + name: { get_param: PROX_server_name } + availability_zone : {get_param: PROX_availability_zone} + flavor: {get_resource: PROX_flavor} + image: {get_param: PROX_image} + key_name: {get_param: PROX_key} + networks: + - port: {get_resource: mgmt_port } + - port: {get_resource: data_port } + user_data: {get_param: PROX_config} + user_data_format: RAW + + PROX_flavor: + type: OS::Nova::Flavor + properties: + ram: 4096 + vcpus: 4 + disk: 80 + extra_specs: {"hw:mem_page_size": "large","hw:cpu_policy": "dedicated","hw:cpu_thread_policy":"isolate"} + + mgmt_port: + type: OS::Neutron::Port + properties: + network_id: { get_param: PROX_mgmt_net_id } + security_groups: + - {get_param: PROX_security_group} + + floating_ip: + type: OS::Neutron::FloatingIP + properties: + floating_network: {get_param: PROX_public_net} + port_id: {get_resource: mgmt_port} + + data_port: + type: OS::Neutron::Port + properties: + network_id: { get_param: PROX_data_net_id } + security_groups: + - {get_param: PROX_security_group} + +outputs: + name: + description: Name of the PROX instance + value: {get_attr: [PROX_instance, name]} + mngmt_ip: + description: Management IP of the VM + value: {get_attr: [floating_ip, floating_ip_address ]} + data_plane_ip: + description: List of DataPlane IPs of the VM + value: + - {get_attr: [data_port, fixed_ips, 0, ip_address]} + data_plane_mac: + description: List of DataPlane MACs of the VM + value: + - {get_attr: [data_port, mac_address]} diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py index b8071b4d..d70fd50e 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py @@ -197,7 +197,7 @@ class FlowSizeTest(RapidTest): endabs_tx = abs_tx endabs_rx = abs_rx if lat_warning or gen_warning or retry_warning: - endwarning = '| | {:177.177} |'.format(retry_warning + lat_warning + gen_warning) + endwarning = '| | {:186.186} |'.format(retry_warning + lat_warning + gen_warning) success = True success_message=' SUCCESS' speed_prefix = lat_avg_prefix = lat_perc_prefix = lat_max_prefix = abs_drop_rate_prefix = drop_rate_prefix = bcolors.ENDC diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py index 553907b0..2a5b51c4 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py @@ -78,15 +78,15 @@ class RapidGeneratorMachine(RapidMachine): speed_per_gen_core = speed / len(self.machine_params['gencores']) self.socket.speed(speed_per_gen_core, self.machine_params['gencores']) - def set_udp_packet_size(self, size): + def set_udp_packet_size(self, frame_size): # We should check the gen.cfg to make sure we only send UDP packets - # Frame size is PROX pkt size + 4 bytes CRC - # PROX "pkt_size" i.e. 14-bytes L2 frame header + VLAN 4 bytes header + IP packet size - self.socket.set_size(self.machine_params['gencores'], 0, size) + # Frame size = PROX pkt size + 4 bytes CRC + # The set_size function takes the PROX packet size as a parameter + self.socket.set_size(self.machine_params['gencores'], 0, frame_size - 4) # 18 is the difference between the frame size and IP size = size of (MAC addresses, ethertype and FCS) - self.socket.set_value(self.machine_params['gencores'], 0, 16, size-18, 2) + self.socket.set_value(self.machine_params['gencores'], 0, 16, frame_size-18, 2) # 38 is the difference between the frame size and UDP size = 18 + size of IP header (=20) - self.socket.set_value(self.machine_params['gencores'], 0, 38, size-38, 2) + self.socket.set_value(self.machine_params['gencores'], 0, 38, frame_size-38, 2) def set_flows(self, number_of_flows): source_port,destination_port = RandomPortBits.get_bitmap(number_of_flows) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py index bd25845f..3901ae92 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py @@ -41,7 +41,7 @@ class RapidLog(object): log = None @staticmethod - def log_init(test_params): + def log_init(log_file, loglevel, screenloglevel, version): # create formatters screen_formatter = logging.Formatter("%(message)s") file_formatter = logging.Formatter("%(asctime)s - %(levelname)s - %(message)s") @@ -51,7 +51,7 @@ class RapidLog(object): # BUT PREVENT IT from propagating messages to the root logger # log = logging.getLogger() - numeric_level = getattr(logging, test_params['loglevel'].upper(), None) + numeric_level = getattr(logging, loglevel.upper(), None) if not isinstance(numeric_level, int): raise ValueError('Invalid log level: %s' % loglevel) log.setLevel(numeric_level) @@ -62,7 +62,7 @@ class RapidLog(object): # console_handler = logging.StreamHandler(sys.stdout) #console_handler.setLevel(logging.INFO) - numeric_screenlevel = getattr(logging, test_params['screenloglevel'].upper(), None) + numeric_screenlevel = getattr(logging, screenloglevel.upper(), None) if not isinstance(numeric_screenlevel, int): raise ValueError('Invalid screenlog level: %s' % screenloglevel) console_handler.setLevel(numeric_screenlevel) @@ -71,7 +71,6 @@ class RapidLog(object): # create a file handler # and set its log level # - log_file = 'RUN{}.{}.log'.format(test_params['environment_file'],test_params['test_file']) file_handler = logging.handlers.RotatingFileHandler(log_file, backupCount=10) #file_handler = log.handlers.TimedRotatingFileHandler(log_file, 'D', 1, 5) file_handler.setLevel(numeric_level) @@ -97,7 +96,7 @@ class RapidLog(object): # Add timestamp log.debug('\n---------\nLog started on %s.\n---------\n' % time.asctime()) - log.debug("runrapid.py version: " + test_params['version']) + log.debug("runrapid.py version: " + version) RapidLog.log = log @staticmethod diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py index 864f84b8..bebc748e 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py @@ -87,7 +87,7 @@ class RapidConfigParser(object): section = 'TestM%d'%test_machine options = testconfig.options(section) for option in options: - if option in ['prox_socket','prox_launch_exit']: + if option in ['prox_socket','prox_launch_exit','monitor']: machine[option] = testconfig.getboolean(section, option) elif option in ['cores', 'gencores','latcores']: machine[option] = ast.literal_eval(testconfig.get(section, option)) @@ -96,41 +96,41 @@ class RapidConfigParser(object): for key in ['prox_socket','prox_launch_exit']: if key not in machine.keys(): machine[key] = True + if 'monitor' not in machine.keys(): + machine['monitor'] = True index = int(machine_map.get('TestM%d'%test_machine, 'machine_index')) section = 'M%d'%index options = config.options(section) for option in options: machine[option] = config.get(section, option) - if 'monitor' not in machine.keys(): - machine['monitor'] = True - else: - machine['monitor'] = config.getboolean(section, option) machines.append(dict(machine)) for machine in machines: dp_ports = [] if 'dest_vm' in machine.keys(): index = 1 - dp_ip_key = 'dp_ip{}'.format(index) - dp_mac_key = 'dp_mac{}'.format(index) - if dp_ip_key in machines[int(machine['dest_vm'])-1].keys() and \ - dp_mac_key in machines[int(machine['dest_vm'])-1].keys(): - dp_port = {'ip': machines[int(machine['dest_vm'])-1][dp_ip_key], - 'mac' : machines[int(machine['dest_vm'])-1][dp_mac_key]} - dp_ports.append(dict(dp_port)) - index += 1 - else: - break - machine['dest_ports'] = list(dp_ports) + while True: + dp_ip_key = 'dp_ip{}'.format(index) + dp_mac_key = 'dp_mac{}'.format(index) + if dp_ip_key in machines[int(machine['dest_vm'])-1].keys() and \ + dp_mac_key in machines[int(machine['dest_vm'])-1].keys(): + dp_port = {'ip': machines[int(machine['dest_vm'])-1][dp_ip_key], + 'mac' : machines[int(machine['dest_vm'])-1][dp_mac_key]} + dp_ports.append(dict(dp_port)) + index += 1 + else: + break + machine['dest_ports'] = list(dp_ports) gw_ips = [] if 'gw_vm' in machine.keys(): index = 1 - gw_ip_key = 'dp_ip{}'.format(index) - if gw_ip_key in machines[int(machine['gw_vm'])-1].keys(): - gw_ip = machines[int(machine['dest_vm'])-1][gw_ip_key] - gw_ips.append(gw_ip) - index += 1 - else: - break - machine['gw_ips'] = list(gw_ips) + while True: + gw_ip_key = 'dp_ip{}'.format(index) + if gw_ip_key in machines[int(machine['gw_vm'])-1].keys(): + gw_ip = machines[int(machine['dest_vm'])-1][gw_ip_key] + gw_ips.append(gw_ip) + index += 1 + else: + break + machine['gw_ips'] = list(gw_ips) test_params['machines'] = machines return (test_params) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py index 1e6818e6..5c10b279 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py @@ -46,7 +46,6 @@ class RapidTestManager(object): @staticmethod def run_tests(test_params): - RapidLog.log_init(test_params) test_params = RapidConfigParser.parse_config(test_params) RapidLog.debug(test_params) monitor_gen = monitor_sut = False @@ -55,7 +54,9 @@ class RapidTestManager(object): machines = [] for machine_params in test_params['machines']: if 'gencores' in machine_params.keys(): - machine = RapidGeneratorMachine(test_params['key'], test_params['user'], test_params['vim_type'], test_params['rundir'], machine_params) + machine = RapidGeneratorMachine(test_params['key'], + test_params['user'], test_params['vim_type'], + test_params['rundir'], machine_params) if machine_params['monitor']: if monitor_gen: RapidLog.exception("Can only monitor 1 generator") @@ -66,7 +67,9 @@ class RapidTestManager(object): else: background_machines.append(machine) else: - machine = RapidMachine(test_params['key'], test_params['user'], test_params['vim_type'], test_params['rundir'], machine_params) + machine = RapidMachine(test_params['key'], test_params['user'], + test_params['vim_type'], test_params['rundir'], + machine_params) if machine_params['monitor']: if monitor_sut: RapidLog.exception("Can only monitor 1 sut") @@ -82,7 +85,8 @@ class RapidTestManager(object): result = True for test_param in test_params['tests']: RapidLog.info(test_param['test']) - if test_param['test'] in ['flowsizetest', 'TST009test', 'fixed_rate']: + if test_param['test'] in ['flowsizetest', 'TST009test', + 'fixed_rate']: test = FlowSizeTest(test_param, test_params['lat_percentile'], test_params['runtime'], test_params['pushgateway'], test_params['environment_file'], gen_machine, @@ -115,10 +119,14 @@ class RapidTestManager(object): def main(): """Main function. """ - test_params = RapidDefaults.test_params + test_params = RapidTestManager.get_defaults() # When no cli is used, the process_cli can be replaced by code modifying # test_params test_params = RapidCli.process_cli(test_params) + log_file = 'RUN{}.{}.log'.format(test_params['environment_file'], + test_params['test_file']) + RapidLog.log_init(log_file, test_params['loglevel'], + test_params['screenloglevel'] , test_params['version'] ) test_result = RapidTestManager.run_tests(test_params) RapidLog.info('Test result is : {}'.format(test_result)) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/sharkproxlog.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/sharkproxlog.sh index 3c1a90ee..18fdaa0b 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/sharkproxlog.sh +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/sharkproxlog.sh @@ -16,4 +16,16 @@ ## This code will help in using tshark to decode packets that were dumped ## in the prox.log file as a result of dump, dump_tx or dump_rx commands -egrep '^[0-9]{4}|^[0-9]+\.' prox.log | text2pcap -q - - | tshark -r - +#egrep '^[0-9]{4}|^[0-9]+\.' prox.log | text2pcap -q - - | tshark -r - +while read -r line ; do + if [[ $line =~ (^[0-9]{4}\s.*) ]] ; + then + echo "$line" >> tempshark.log + fi + if [[ $line =~ (^[0-9]+\.[0-9]+)(.*) ]] ; + then + date -d@"${BASH_REMATCH[1]}" -u +%H:%M:%S.%N >> tempshark.log + fi +done < <(cat prox.log) +text2pcap -t "%H:%M:%S." -q tempshark.log - | tshark -r - +rm tempshark.log diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/stackdeployment.py b/VNFs/DPPD-PROX/helper-scripts/rapid/stackdeployment.py new file mode 100755 index 00000000..25b9895f --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/stackdeployment.py @@ -0,0 +1,145 @@ +#!/usr/bin/python +import os_client_config +import heatclient +from heatclient.client import Client as Heat_Client +from keystoneclient.v3 import Client as Keystone_Client +from heatclient.common import template_utils +from novaclient import client as NovaClient +import yaml +import os +import time +import sys +from collections import OrderedDict +from rapid_log import RapidLog + +class StackDeployment(object): + """Deployment class to create VMs for test execution in OpenStack + environment. + """ + def __init__(self, cloud_name): +# RapidLog.log_init('CREATEStack.log', 'DEBUG', 'INFO', '2020.05.05') + self.dp_ips = [] + self.dp_macs = [] + self.mngmt_ips = [] + self.names = [] + self.number_of_servers = 0 + self.cloud_name = cloud_name + self.heat_template = 'L6_heat_template.yaml' + self.heat_param = 'params_rapid.yaml' + self.cloud_config = os_client_config.OpenStackConfig().get_all_clouds() + ks_client = None + for cloud in self.cloud_config: + if cloud.name == self.cloud_name: + ks_client = Keystone_Client(**cloud.config['auth']) + break + if ks_client == None: + sys.exit() + heat_endpoint = ks_client.service_catalog.url_for(service_type='orchestration', + endpoint_type='publicURL') + self.heatclient = Heat_Client('1', heat_endpoint, token=ks_client.auth_token) + self.nova_client = NovaClient.Client(2, **cloud.config['auth']) + + def generate_paramDict(self): + for output in self.stack.output_list()['outputs']: + output_value = self.stack.output_show(output['output_key'])['output']['output_value'] + for server_group_output in output_value: + if (output['output_key'] == 'number_of_servers'): + self.number_of_servers += int (server_group_output) + elif (output['output_key'] == 'mngmt_ips'): + for ip in server_group_output: + self.mngmt_ips.append(ip) + elif (output['output_key'] == 'data_plane_ips'): + for dps in server_group_output: + self.dp_ips.append(dps) + elif (output['output_key'] == 'data_plane_macs'): + for mac in server_group_output: + self.dp_macs.append(mac) + elif (output['output_key'] == 'server_name'): + for name in server_group_output: + self.names.append(name) + + def print_paramDict(self, user, push_gateway): + if not(len(self.dp_ips) == len(self.dp_macs) == len(self.mngmt_ips)): + sys.exit() + _ENV_FILE_DIR = os.path.dirname(os.path.realpath(__file__)) + env_file = os.path.join(_ENV_FILE_DIR, self.stack.stack_name)+ '.env' + with open(env_file, 'w') as env_file: + env_file.write('[rapid]\n') + env_file.write('total_number_of_machines = {}\n'.format(str(self.number_of_servers))) + env_file.write('\n') + for count in range(self.number_of_servers): + env_file.write('[M' + str(count+1) + ']\n') + env_file.write('name = {}\n'.format(str(self.names[count]))) + env_file.write('admin_ip = {}\n'.format(str(self.mngmt_ips[count]))) + if type(self.dp_ips[count]) == list: + for i, dp_ip in enumerate(self.dp_ips[count], start = 1): + env_file.write('dp_ip{} = {}\n'.format(i, str(dp_ip))) + else: + env_file.write('dp_ip1 = {}\n'.format(str(self.dp_ips[count]))) + if type(self.dp_macs[count]) == list: + for i, dp_mac in enumerate(self.dp_macs[count], start = 1): + env_file.write('dp_mac{} = {}\n'.format(i, str(dp_mac))) + else: + env_file.write('dp_mac1 = {}\n'.format(str(self.dp_macs[count]))) + env_file.write('\n') + env_file.write('[ssh]\n') + env_file.write('key = {}\n'.format(self.private_key_filename)) + env_file.write('user = {}\n'.format(user)) + env_file.write('\n') + env_file.write('[Varia]\n') + env_file.write('vim = OpenStack\n') + env_file.write('stack = {}\n'.format(self.stack.stack_name)) + env_file.write('pushgateway = {}\n'.format(push_gateway)) + + def create_stack(self, stack_name, stack_file_path, param_file): + files, template = template_utils.process_template_path(stack_file_path) + heat_parameters = open(param_file) + temp_params = yaml.load(heat_parameters,Loader=yaml.BaseLoader) + heat_parameters.close() + stack_created = self.heatclient.stacks.create(stack_name=stack_name, template=template, + parameters=temp_params["parameters"], files=files) + stack = self.heatclient.stacks.get(stack_created['stack']['id'], resolve_outputs=True) + # Poll at 5 second intervals, until the status is no longer 'BUILD' + while stack.stack_status == 'CREATE_IN_PROGRESS': + print('waiting..') + time.sleep(5) + stack = self.heatclient.stacks.get(stack_created['stack']['id'], resolve_outputs=True) + if stack.stack_status == 'CREATE_COMPLETE': + return stack + else: + RapidLog.exception('Error in stack deployment') + + def create_key(self): + keypair = self.nova_client.keypairs.create(name=self.key_name) + # Create a file for writing that can only be read and written by owner + fp = os.open(self.private_key_filename, os.O_WRONLY | os.O_CREAT, 0o600) + with os.fdopen(fp, 'w') as f: + f.write(keypair.private_key) + RapidLog.info('Keypair {} created'.format(self.key_name)) + + def IsDeployed(self, stack_name): + for stack in self.heatclient.stacks.list(): + if stack.stack_name == stack_name: + RapidLog.info('Stack already existing: {}'.format(stack_name)) + self.stack = stack + return True + return False + + def IsKey(self): + keypairs = self.nova_client.keypairs.list() + if next((x for x in keypairs if x.name == self.key_name), None): + RapidLog.info('Keypair {} already exists'.format(self.key_name)) + return True + return False + + def deploy(self, stack_name, keypair_name, heat_template, heat_param): + self.key_name = keypair_name + self.private_key_filename = '{}.pem'.format(keypair_name) + if not self.IsDeployed(stack_name): + if not self.IsKey(): + self.create_key() + self.stack = self.create_stack(stack_name, heat_template, heat_param) + + def generate_env_file(self, user = 'centos', push_gateway = None): + self.generate_paramDict() + self.print_paramDict(user, push_gateway) -- cgit 1.2.3-korg