| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a new parameter in the config_file: dataplane_subnet_mask. This
parameter is added to the dataplane IP addresses and is needed by the
Linux stack to deal with some protocols (e.g. ARP). If not present, the
default value of 24 will be used. In the end, this will make sure that
IP addresses in the rapid.env file will have this mask, e.g. /24
If you use other tools than createrapid.py to create the rapid.env file,
make sure to add the mask.
This commit also introduces a change when exiting: we only copy the
prox.log files from the different prox instances in case we expect a new
prox.log file to be created in these instances.
When using a valid format.yaml file, the tool will now also send the
latency distribution data (histogram) to the URL.
The tool is now also checking the value of bucket_size_exp: it needs to
be 11 or more.
Change-Id: I633cdc64ef687fdb6625be1e7482a5a371f83e93
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
deploycentostools.sh is now installing a recent PROX version. When using
background traffic, the tool is also reporting the total traffic that
was handled by the NFVi stack, including foreground & background
traffic.
The use of the prox_socket and prox_launch_exit was also broken in a
previous release and is now fixed.
When setting prox_socket to false for a PROX instance, we will not
create a socket connection to control that PROX instance. Setting this
option to false is not meaningful for the generator PROX instances since
we would not be able to control the behavior of the PROX generator
during the test. You could use the generator against another non-PROX
instance and then set prox_socket to false for that non-PROX instance.
Default is true.
prox_launch_exit is used to start and stop the PROX program inside the
instance. Default is true. This is useful in case you want to start PROX
manually to be able to inspect the PROX UI, but at the same time, let
the rapid scripts control the testing.
Change-Id: Ib5aa809f4be201859542769f5f55f4989dad97ef
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Using vfio in stead of igb_uio. DPDK 2020.5 is NOT compiling the igb_uio
driver by default any more.
For the l3 mode, we are now using the new PROX vdev feature. This is
achieved by adding the vdev parameter in the port section of the PROX
config files. One of the advantages is that we can now ping a port
managed by PROX: the requests will be forwarded by PROX to the LINUX
stack, who will reply to the ping. A tap device is being created by PROX
to support this feature.
Installing old version of nasm since latest causes some issues.
If not pushgateway is being used, it should be commented out in the
config_file.
vfio is now loaded by specifying the module in /etc/modules-load.d
There is also an after_boot.sh script that will be run by
check_prox_system_setup.sh, which can be used for further configuration
of the instance after boot.
There is now also a file created /opt/rapid/system_ready_for_rapid by
the check_prox_system_setup.sh script. This file is created once all
configuration is done. The runrapid.py script will wait till this file
is created before executing any tests.
Change-Id: Ic5c41af82642066af42134c3323297f5a06f6f72
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The code has been rewritten in multiple classes and files for better
readability and maintainability. You should now also use Python3 to run
the scripts. Some of the variables in the config files have moved to
other sections. The pushgateway parameter moved to the [varia] section
of the rapid environment file.
Change-Id: Ic61a1bc3baa39447d42b21dfcc0f16c28fcdfa6e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
In case of kubernetes based deployments procedure for test environment
creation is different. Please refer to README.k8s file for more
details.
Dockerfile and dockerimage.sh files can be used to create a docker
image with prox.
There is separate createrapidk8s.py script which is used to create
appropriate number of PODs for testing based on the rapid.pods
configuration.
port_info is a helper application to identify port MAC address.
Change-Id: I73611f066ac54260aa11dd17c173379df06f46a5
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
When no sut_sock monitoring the swap, the while loop would never come to
an end. Also added heartbeat timeout in the generator config files.
Change-Id: I3c36991c65b9b826faf3d051a1354ca7eb34c24e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
A new parameter bucket_size_exp in the *.test file specifies the bucket
size for latency measurement. The default is 11 which corresponds to a
bucket size of 1 usec for a 2GHz processor. This fix is also calculating
the bucket size based on the reported frequency. Before it was assuming
a 2GHz processor.
Change-Id: I70d15e90e151a7e474cd05c9ac91b71a11fd5c78
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Taking into account comments from Patrice and Xavier
Change-Id: Ifdabd1945e074c9ee97b059956f107901392c020
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
- Change inittest in warmuptest. This has now a warmuptime, warmupspeed,
packet size and flow size.
- Change in centos.json. This will now also copy deploycentostools.sh
during image building so that it can be used to re-compile prox in the VM
by typing "./deploycentostools.sh compile"
- runrapid.py parameters needing a file name, need to be complete file
names: no extensions will be added any more by the scripts.
- Changes in createrapid.py to handel the openstack CLI output in a
simpler way.
- The management interface of the VMs can now also be an SRIOV interface.
We have now an extra optional parameter in the VM sections of the
rapiVMs.vms file: SRIOV_mgmt_port
- Changed the name of some sections and keys in the environment file since
runrapid.py will not always communicate to OpenStack VMs. This could be
containers or any other (virtual) machine.
- The previous MachineMap.cfg has been renamed to machine.map
- A new test has been added: monitorswap is just showing the statistics of
a swap (virtual) machine, without generating any packets. This is useful
in situations where an external tester is used.
- Latency and core statistics can now be measured even if there are
multiple PROX cores and tasks running. A new parameter has been added in
the test files with following default value: tasks=[0]. During the
collection of statistics, all tasks in this list will be queried. It is
ok to have a non-existing task in such a query since it will be ignored.
- A --screenlog parameter was added for runrapid.py allowing for more
detailed output on the screen during debugging. No need to check the log
file.
- Previous tests to run multiple packet size with a given flow size and to
run multiple flow size, with a given packet size are now combined by
specifiying 2 lists: packetsizes & flows
- The screen output of this test has also been reworked with more
meaningful column names and the test result is now in the field "core
received". This allows also for faster termination of the test: When the
all packets sent by Gen NIC are received by the cores within the
thresholds for packet loss and latency, the test is now stopped, even we
were requesting more packets to be sent.
Change-Id: I3307e7a972f2140e739f376f146fe875df0303e6
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The scripts are orrignally written to support an OpenStack deployment.
We are now making changes to support container environments, hence
renaming the directory to rapid.
Change-Id: Icaa2fad83c6da451eee733934151e98e9cd07de4
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
Luc Provoost
Yury Kylulin