summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-06-26tools: Adding patches for disabling the DEBUG logs in DPDKAnand B Jyoti1-0/+2
JIRA: SAMPLEVNF-45 Apply the patches to disable the default DEBUG prints in the DPDK libraries. Change-Id: If17422e8398c8798ec9e97d9f141b2a8b2a53fd4 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-26dpdk: Disable DEBUG logs by default in DPDK librariesAnand B Jyoti1-0/+13
JIRA: SAMPLEVNF-45 The default RTE_LOG_LEVEL is set to 8 enables all debug prints which impacts the performance testing. This patch sets the RTE_LOG_LEVEL to INFO to avoid printing of logs with level DEBUG. Change-Id: I1fdeecab9cd82f37f62e1ccfa625f91d1cf16217 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-26dpdk: Disable debug logs in ACL rte_table_acl_buildAnand B Jyoti1-0/+14
JIRA: SAMPLEVNF-46 Debug logs enabled by default causes delay in application initialization as there can be many ACL rules to be setup during initialization. This patch disables the ACL logs during rte_table_acl_build by default and can be enabled by setting the RTE_LOG_LEVEL to DEBUG. Change-Id: I48e642f8768135087b0ed4f1677c1c9ac9e0df58 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-22Merge "vCGNAPT: remove unused function and a patch"Deepak S3-94/+0
2017-06-15Adding Sample vCGNAPT config to run with multi-port pairv1.0.0Deepak S7-250740/+970
JIRA: SAMPLEVNF-40 This patch adds sample vCGNAPT config for 1, 6, 10 port pair Change-Id: I003e98b26e794d111af562232e8688f255a7d61a Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-09vCGNAPT: remove unused function and a patchAnand B Jyoti3-94/+0
JIRA: SAMPLEVNF-21 Removing unused function rte_pipeline_action_handler_port_ext() and a patch rte_pipeline.patch which was applied on top of DPDK 16.04. These are not used, hence cleaning up for DPDK migration. Change-Id: I33a646ad27857c880969574b37412236ed3d780c Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-06Adding timer dyn timeout config in timer profile.Deepak S1-2/+15
This patch enabled dynamic tune of timer timeout [PIPELINE2] type = TIMER core = 2 timer_dyn_timeout = 20 #-- new config to change dyn timer timeout n_flows = 1048576 Change-Id: I614cf73a7fc1afd9050580286c9a968aacb619fa Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-06Set rxq and txq to same value to enable to run UDP replay on single threadDeepak S1-2/+2
Change-Id: Iee26005d5e90a7481f6e6fb3c7441a2011fe5596 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Enable UDP_replay on OVS deploymentDeepak S1-4/+6
Use ETHER_TYPE instead packet_type when hw-ip-check is disabled. Change-Id: Iced93b78d9f4e58011dd051e88ddd312112e0cba Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Adding UDP Replay VNF without arp supportDeepak S6-2/+3156
JIRA: SAMPLEVNF-8 This code adds support for UDP Replay which acts as a reflector of all the UDP packets on the requested port. Change-Id: I633e65a4964fab4cc46e2ed09c742dcc63ce6258 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Revert "[SAMPLEVNF] Adding UDP Replay VNF"Deepak S12-3724/+15
This reverts commit 1b0802cbf10ac4d8911f0916d4ba0b02010924c8. Change-Id: Ic2bb69125d0d849b260475026a1088911d2d7109 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Revert "[BUG]: Fix segfault while sending the packets back"Deepak S1-1/+1
This reverts commit b04a6e5dacc458f81097c9b8a172dcbf16d8fd50. Change-Id: Icb9a4ddea607c9dd9324a413407c266e8f6106f0 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-01CT: Perf optimization through prefetch and condition checks in CTAnand B Jyoti2-12/+43
JIRA: SAMPLEVNF-10 LLC miss is possible when the connection data structure is accessed after retrieved from hash table entries for TCP/UDP connection. CPI for rte_ct_udp_packet() is not good due to if/else condition checks. This patch provide a prefetch instructions to pre-fetch the cnxn data entry structure to avoid the LLC miss and also optimize the if/else condition check to improve the CPI for rte_ct_udp_packet() function. Change-Id: Ieaf70815c919ddbe1ff34921222eac030fb41756 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-01[BUG]: Fix segfault while sending the packets backDeepak S1-1/+1
JIRA: SAMPLEVNF-18 This patch fixes segfault due to wrong use of portid while accessing array Change-Id: I1e8b57c27e7c26918bd61cb1d72dbe88ab269c98 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-01Merge "[SAMPLEVNF] Adding support to handle more than 16 ports"Deepak S9-20/+250865
2017-06-01[SAMPLEVNF] Adding support to handle more than 16 portsDeepak S9-20/+250865
This patch extends num_ports vnf can handle ports > 16 . This include changes in the memory allocatiion and size of different paramters Change-Id: Id8907327023ba863ad107bb874cfb60bd38daee5 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-31Merge "acl_lib: remove unused dualstack code from acl library"Deepak S2-379/+0
2017-05-31Merge "vFW: remove unused dualstack support code"Deepak S1-660/+1
2017-05-31Merge "vFW: Clear the pkt drop count for unsupported type in clearstats cmd"Deepak S1-0/+1
2017-05-30If port configuration fails. Try again after disabling TX OFFLOADDeepak S3-9/+25
Change-Id: I5eaf64a0cac8747ba5ac79bfd036a77cee766e39 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-30[SAMPLEVNF] Adding UDP Replay VNFVishwesh M Rudramuni12-15/+3724
JIRA: SAMPLEVNF-8 This code adds support for UDP Replay which acts as a reflector of all the UDP packets on the requested port. Change-Id: If8330580f58c785736e578e815d15d983ce20209 Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-18Adding http proxy setup for non-intractive buildDeepak S1-0/+12
Change-Id: I9a3137f60b83c88b16027a9e6c404ccc3673b820 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-18Adding support to build the vnfs without user interventionDeepak S1-0/+24
./tools/vnf_build.sh --silient Change-Id: I50ecdc263a732d1ed823202107e49ffaa739e9b4 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-12Change PMD link down to warning instead of panic errorDeepak S1-1/+1
On SRIOV/OVS, NIC interface link always be UP. But to set the IP, we need to bring down the interface. This patch allows the program to continue after printing warning. Change-Id: I79212f4d71501af5f3065143e067a22855a5fde6 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-12acl_lib: remove unused dualstack code from acl libraryAnand B Jyoti2-379/+0
JIRA: SAMPLEVNF-14 The simultaneous IPV4 and IPV6 traffic is not required/supported. The IPv4 and IPv6 separation is done to avoid multiple checks between v4 and v6 and to improve the throughput performance. Remove this in-used/unsupported code from the acl library code. Change-Id: I4b5c562e541b1616279f0332d8b837c44b7e865d Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-12vFW: remove unused dualstack support codeAnand B Jyoti1-660/+1
JIRA: SAMPLEVNF-14 The simultaneous IPV4 and IPV6 traffic is not required/supported. The IPv4 and IPv6 separation is done to avoid multiple checks between v4 and v6 and to improve the throughput performance. This patch removes this unused/unsupported code from the vFW. Change-Id: Iefea5a6ed8c9454be9807eb1796908aec7bfc199 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-12vFW: Clear the pkt drop count for unsupported type in clearstats cmdAnand B Jyoti1-0/+1
JIRA: SAMPLEVNF-13 The packets drop counter of unsupported type was not cleared during clearstats command of the vFW. This patch adds the fix to clear the pkt_drop_unsupported_type at the clearstats cmd. Change-Id: I07d2c85a288efbc5e1fa6cee84c2ffe12e9673f4 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-11Allow enable/disable of checksum for cgnaptDeepak S2-19/+19
JIRA: SAMPLEVNF-11 Enable Checksum in makefile add CHECKSUM_REQ --> hw_checksum_req=1 in config for hw_checksum --> hw_checksum_req=0 in config for sw_checksum disable checksum in makefile comment CHECKSUM_REQ Change-Id: I5ebcfe845082ea49acaa13bc963fc07b92b90650 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-11Default enable only NAPT featuresDeepak S1-5/+5
JIRA: SAMPLEVNF-11 By Default CGNAPT will have only NAPT feature. To enable other advance feature, Uncomment same in Makefile - PCP - SIP_ALG - CT_CGNAT - FTP_ALG Change-Id: I8602726e6db8a899a94028f7bc16d6e7339438b9 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-21BUGFix: Allow the vCGNAPT compile without FTP/SIP functionalityDeepak S1-1/+4
JIRA: SAMPLEVNF-7 Change-Id: Ia5d0729cc3959b9b4cf1e0cb356758adf83e5d83 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-21BugFix: Correct the path while checking for dpdk installation folder.Deepak S1-1/+1
JIRA: SAMPLEVNF-6 Change-Id: Ifa4fcee4cca3a62873b16a2009de93b7c138b179 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vFW: Adding Virtual Firewall VNFAnand B Jyoti35-1/+12953
JIRA: SAMPLEVNF-4 vFW supports following features: - Basic packet filtering (malformed packets, IP fragments) - Connection tracking for TCP and UDP - Access Control List for rule based policy enforcement - SYN-flood protection via Synproxy* for TCP - UDP, TCP and ICMP protocol pass-through - CLI based enable/disable connection tracking, synproxy, basic packet filtering - Hardware and Software Load Balancing - L2L3 stack support for ARP/ICMP handling - Multithread support - Multiple physical port support Change-Id: I96d28858488ed8764370d161975bc1e0557c8b20 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vACL VNF initial check-inBindya Narayan19-1/+10472
JIRA: SAMPLEVNF-2 Features include: - CLI based Run-time rule configuration. (Add, Delete, List, Display, Clear, Modify) - Ipv4 and ipv6 standard 5 tuple packet Selector support. - Multithread support - Multiple physical port support Change-Id: Ie266be23cd2d81f6d01df508ba44bd0998be13b3 Signed-off-by: Bindya Narayan <bindya.narayan@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vCGNAPT VNF initial check-inDeepak S48-0/+20568
JIRA: SAMPLEVNF-5 The vCGNAPT implementation contains following features: • Static and dynamic Network address translation. • Static and dynamic Network address and port translation • ARP (request, response, gratuitous) • ICMP (terminal echo, echo response, pass-through) • ICMPv6 and ND • UDP, TCP and ICMP protocol pass-through • Multithread support and Multiple physical port support • Limiting max ports per client • Limiting max clients per public IP address • Live Session tracking to NAT flow • NAT64 – connectivity between IPv6 access network to IPv4 data • PCP - Port Control protocol • SIP functionality • FTP functionality Change-Id: I5ebb44ae60e32dd6da5e793efd91a6831a4d30a7 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19Adding script to auto build VNFsDeepak S9-0/+1101
Change-Id: I5af3301dceacb57499b92c543b912ed21f8b253d Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-18common: Adding common library for sample vnfVishwesh M Rudramuni78-0/+42324
JIRA: SAMPLEVNF-3 This patch adds common libraries required as part of the sample vnf. This includes the following libraries 1. ACL library 2. SIP 3. FTP 4. Connection tracker 5. L2l3 stack - Interface Manager - ARP & ICMPv4 - ND & ICMPv6 and other common libraries needed for ip pipeline framework Change-Id: I117690b6b63fbcd76974cd7274518484e60980ab Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-18Adding INFO and LICENSE for reviewagardner3-0/+36
Change-Id: If7ea70d202cda197db9f4913148e6a0f2e94e3bb Signed-off-by: agardner <agardner@linuxfoundation.org>
2017-03-28Initial empty repositoryAric Gardner0-0/+0