summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/release/release-notes/index.rst6
-rw-r--r--docs/release/release-notes/release-notes.rst18
-rw-r--r--docs/release/results/overview.rst2
-rw-r--r--docs/testing/developer/design/04-SampleVNF_Design.rst7
-rw-r--r--docs/testing/developer/design/images/l2l3-components.pngbin0 -> 14832 bytes
-rw-r--r--docs/testing/developer/design/images/state-machine.pngbin0 -> 95685 bytes
-rwxr-xr-xdocs/testing/user/userguide/01-introduction.rst6
-rw-r--r--docs/testing/user/userguide/02-methodology.rst2
-rwxr-xr-xdocs/testing/user/userguide/03-architecture.rst63
-rw-r--r--docs/testing/user/userguide/04-installation.rst76
-rw-r--r--docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst907
-rw-r--r--docs/testing/user/userguide/06-How_to_use_REST_api.rst340
-rw-r--r--docs/testing/user/userguide/07-Config_files.rst123
-rw-r--r--docs/testing/user/userguide/images/prox_core.pngbin0 -> 651187 bytes
14 files changed, 1076 insertions, 474 deletions
diff --git a/docs/release/release-notes/index.rst b/docs/release/release-notes/index.rst
index 323e42ef..55cb49f1 100644
--- a/docs/release/release-notes/index.rst
+++ b/docs/release/release-notes/index.rst
@@ -1,13 +1,13 @@
- .. _samplevnf-results:
+ .. _samplevnf-releasenotes:
.. This work is licensed under a Creative Commons Attribution 4.0 International
.. License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) OPNFV, Intel Corporation and others.
-****************************
+***********************
SampleVNF Release Notes
-****************************
+***********************
.. toctree::
:maxdepth: 1
diff --git a/docs/release/release-notes/release-notes.rst b/docs/release/release-notes/release-notes.rst
index a66a6ee8..e2a66217 100644
--- a/docs/release/release-notes/release-notes.rst
+++ b/docs/release/release-notes/release-notes.rst
@@ -43,7 +43,6 @@ Version History
| *Date* | *Version* | *Comment* |
| | | |
+----------------+--------------------+---------------------------------+
-+----------------+--------------------+---------------------------------+
| "Oct 20 2017" | 5.0 | SampleVNF for Euphrates release |
| | | |
+----------------+--------------------+---------------------------------+
@@ -79,19 +78,20 @@ OPNFV platform, including:
* SampleVNF source code
For Euphrates release, the *SampleVNF* supported:
+
+----------------+---------------------------------------------------------+-------------------+
-| **VNF** | **Name** | **version** |
+| *VNF* | *Name* | *version* |
+----------------+---------------------------------------------------------+-------------------+
-| **CGNAPT** | Carrier Grade Network Address and port Translation .5.0 | v0.1.0 |
+| *CGNAPT* | Carrier Grade Network Address and port Translation .5.0 | v0.1.0 |
+----------------+---------------------------------------------------------+-------------------+
-| **Prox** | Packet pROcessing eXecution engine | v0.39.0 |
-| acts as traffic generator, L3FWD, L2FWD, BNG etc | |
+| *Prox* | Packet pROcessing eXecution engine | v0.39.0 |
+| | acts as traffic generator, L3FWD, L2FWD, BNG etc | |
+----------------+---------------------------------------------------------+-------------------+
-| **vACL** | Access Control List | v0.1.0 |
+| *vACL* | Access Control List | v0.1.0 |
+----------------+---------------------------------------------------------+-------------------+
-| **vFW** | Firewall | v0.1.0 |
+| *vFW* | Firewall | v0.1.0 |
+----------------+---------------------------------------------------------+-------------------+
-| **UDP_replay** | UDP_Replay | v0.1.0 |
+| *UDP_replay* | UDP_Replay | v0.1.0 |
+----------------+---------------------------------------------------------+-------------------+
.. note:: Highlevel Desgin and features supported by each of the VNFs is described in Developer
@@ -152,7 +152,7 @@ Documents
- User Guide: http://artifacts.opnfv.org/samplevnf/euphrates/5.0.0/docs/testing_user_userguide/index.html
- - Developer Guide: http://artifacts.opnfv.org/samplevnf/euphrates/5.0.0/docs/testing_developer/index.html
+ - Developer Guide: http://artifacts.opnfv.org/samplevnf/euphrates/5.0.0/docs/testing_developer/index.html
Software Deliverables
diff --git a/docs/release/results/overview.rst b/docs/release/results/overview.rst
index 77b36542..df04d327 100644
--- a/docs/release/results/overview.rst
+++ b/docs/release/results/overview.rst
@@ -3,7 +3,7 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) OPNFV, Intel Corporation and other.
-Yardstick test tesult document overview
+SampleVNF test tesult document overview
=======================================
.. _`SampleVNF user guide`: artifacts.opnfv.org/samplevnf/docs/userguide/index.html
diff --git a/docs/testing/developer/design/04-SampleVNF_Design.rst b/docs/testing/developer/design/04-SampleVNF_Design.rst
index 2bcf6252..a3332e27 100644
--- a/docs/testing/developer/design/04-SampleVNF_Design.rst
+++ b/docs/testing/developer/design/04-SampleVNF_Design.rst
@@ -20,6 +20,9 @@ Introduction
L2L3 stack comprises of a set of libraries which are commonly used by all
other VNF's.
+.. image:: images/l2l3-components.png
+ :width: 800px
+
It comprises of following components.
* Interface Manager
@@ -27,7 +30,6 @@ It comprises of following components.
* ARP/ND & L2 adjacency Library
* L3 stack components
-
Interface Manager
-----------------
@@ -56,7 +58,8 @@ ARP/ND & L2 adjacency Library
The ARP/ND state machine is given in the following diagram.
-.. image:: state-machine.png
+.. image:: images/state-machine.png
+ :width: 800px
This library provides api's for handling ARP/ICMPv4 & ND/ICMPV6 packets
handling. It provides api's for creating/deleting & populating an entry.
diff --git a/docs/testing/developer/design/images/l2l3-components.png b/docs/testing/developer/design/images/l2l3-components.png
new file mode 100644
index 00000000..751c4b7c
--- /dev/null
+++ b/docs/testing/developer/design/images/l2l3-components.png
Binary files differ
diff --git a/docs/testing/developer/design/images/state-machine.png b/docs/testing/developer/design/images/state-machine.png
new file mode 100644
index 00000000..f0b06199
--- /dev/null
+++ b/docs/testing/developer/design/images/state-machine.png
Binary files differ
diff --git a/docs/testing/user/userguide/01-introduction.rst b/docs/testing/user/userguide/01-introduction.rst
index ab79e931..10c0161f 100755
--- a/docs/testing/user/userguide/01-introduction.rst
+++ b/docs/testing/user/userguide/01-introduction.rst
@@ -53,6 +53,12 @@ This document consists of the following chapters:
* Chapter :doc:`05-How_to_run_SampleVNFs` provides example on how installing and running *SampleVNF*.
+* Chapter :doc:`06-How_to_use_REST_api` provides info on how to run REST API *SampleVNF*.
+
+* Chapter :doc:`07-Config_files` provides info *SampleVNF* configuration.
+
+* Chapter :doc:`08-CLI_Commands_Reference` provides info on CLI commands supported by *SampleVNF*
+
Contact SampleVNF
=================
diff --git a/docs/testing/user/userguide/02-methodology.rst b/docs/testing/user/userguide/02-methodology.rst
index 5550fec9..01cbb276 100644
--- a/docs/testing/user/userguide/02-methodology.rst
+++ b/docs/testing/user/userguide/02-methodology.rst
@@ -11,7 +11,7 @@ Abstract
========
This chapter describes the methodology/overview of SampleVNF project from
-the perspective of a :term:`VNF` and verifying the :term:`NFVI`
+the perspective of a :term:`VNF` and :term:`NFVI` Characterization
Overview
========
diff --git a/docs/testing/user/userguide/03-architecture.rst b/docs/testing/user/userguide/03-architecture.rst
index 3654c43a..08e1b2f2 100755
--- a/docs/testing/user/userguide/03-architecture.rst
+++ b/docs/testing/user/userguide/03-architecture.rst
@@ -9,7 +9,7 @@ Architecture
Abstract
========
-This chapter describes the samplevnf software architecture.
+This chapter describes the samplevnf software architecture.
we will introduce it VNFs. More technical details will be introduced in this chapter.
Overview
@@ -79,6 +79,65 @@ VNF supported
Intel® DPPD - PROX is an application built on top of DPDK which allows
creating software architectures, such as the one depicted below, through
small and readable configuration files.
+ This VNF can act as L2FWD, L3FWD, BNG etc.
+
+Feature supported by the VNFs
+-----------------------------
+
+The following features were verified by SampleVNF test cases:
+
+ - vFW - Virtual Firewall
+
+ * Basic Packet filter dropping malformed, invalid packets based on L3/L4 packet headers
+ * Policy based filtering
+ * Dynamic Packet filtering through Connection Tracker for TCP and UDP
+ * SYN-flood protection via synproxy for TCP
+ * UDP, TCP and ICMP protocol pass-through
+ * CLI based enable/disable connection tracking, synproxy, basic packet filtering
+ * Multithread support
+ * Multiple physical port support
+ * Providing statistics on traffic traversing the VNF
+
+ - vCG-NAPT - Carrier Grade Network Address and port Translation
+
+ * Static and dynamic Network address translation.
+ * Static and dynamic Network address and port translation
+ * ARP (request, response, gratuitous)
+ * ICMP (terminal echo, echo response, pass-through)
+ * UDP, TCP and ICMP protocol pass-through
+ * Multithread support and Multiple physical port support
+ * Limiting max ports per client
+ * Limiting max clients per public IP address
+ * Live Session tracking to NAT flow
+ * NAT64 – connectivity between IPv6 access network to IPv4 data network.
+
+ - vACL - Access Control List
+
+ * CLI based Run-time rule configuration (Add, Delete, List, Display, Clear, Modify)
+ * IPv4 and IPv6 5 tuple packet Selector support
+ * Counting packets and bytes per rule
+ * Multithread support
+ * Multiple physical port support
+ * Forwarding packets to specific ports on base of rules
+ * Rules definition on base TCP/UDP connection tracking
+
+ - Prox - Packet pROcessing eXecution engine.
+
+ * Classify
+ * Drop
+ * Basic Forwarding (no touch)
+ * L2 Forwarding (change MAC)
+ * GRE encap/decap
+ * Load balance based on packet fields
+ * Symmetric load balancing
+ * QinQ encap/decap IPv4/IPv6
+ * ARP
+ * QoS
+ * Routing
+ * Unmpls
+ * Policing
+ * Basic ACL
+ * Basic CGNAT
Test Framework
--------------
@@ -111,3 +170,5 @@ SampleVNF Directory structure
*VNFs/* - all VNF source code directory.
*VNF_Catalogue/* - Collection of all Open Source VNFs
+
+*heat_template/* - Sample HEAT templates for VNFs
diff --git a/docs/testing/user/userguide/04-installation.rst b/docs/testing/user/userguide/04-installation.rst
index 9a31ecdc..e54243cb 100644
--- a/docs/testing/user/userguide/04-installation.rst
+++ b/docs/testing/user/userguide/04-installation.rst
@@ -108,6 +108,11 @@ The connectivity could be
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
+ For correalted traffic, use below configuration
+ TG_1:port 0 <------> VNF:Port 0
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ (TG_2(UDP_Replay) reflects all the traffic on the given port)
+
2) Multi port pair : More than one pair of traffic
::
@@ -120,7 +125,9 @@ The connectivity could be
For correalted traffic, use below configuration
TG_1:port 0 <------> VNF:Port 0
- VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ TG_1:port 1 <------> VNF:Port 2
+ VNF:Port 3 <------> TG_2:port 1 (UDP Replay)
(TG_2(UDP_Replay) reflects all the traffic on the given port)
* Bare-Metal
@@ -148,15 +155,16 @@ Build VNFs on the DUT:
Auto Build - Using script to build VNFs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Interactive options:
-
::
./tools/vnf_build.sh -i
- Follow the steps in the screen from option [1] –> [9] and
- select option [8] to build the vnfs.
+ Follow the steps in the screen from option [1] –> [10] and
+ select option [9] to build the vnfs.
It will automatically download selected DPDK version and any
required patches and will setup everything and build VNFs.
+ Options [8], If RestAPI feature is needed install 'civetweb'
+
Following are the options for setup:
----------------------------------------------------------
Step 1: Environment setup.
@@ -172,17 +180,17 @@ Auto Build - Using script to build VNFs
[5] Download DPDK zip
[6] Build and Install DPDK
[7] Setup hugepages
+ [8] Download and Build civetweb
----------------------------------------------------------
Step 3: Build VNFs
----------------------------------------------------------
- [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
+ [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
- [9] Exit Script
- * non-Interactive options:
+ [10] Exit Script
+ * non-Interactive options:
::
-
./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
Manual Build
@@ -191,40 +199,32 @@ Manual Build
::
1. Download DPDK supported version from dpdk.org
- http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
- unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
- cd dpdk
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
- make -j
- 2. Setup huge pages
- For 1G/2M hugepage sizes, for example 1G pages, the size must be specified
- explicitly and can also be optionally set as the default hugepage size
- for the system. For example, to reserve 8G of hugepage memory in the form
- of eight 1G pages, the following options should be passed to the
- kernel: * default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
- 3. Add this to Go to /etc/default/grub configuration file.
- Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”to the GRUB_CMDLINE_LINUX entry.
- 4. Setup Environment Variable
- export RTE_SDK=<samplevnf>/dpdk
- export RTE_TARGET=x86_64-native-linuxapp-gcc
- export VNF_CORE=<samplevnf>
- or using ./tools/setenv.sh
- 5. Build vACL VNFs
- cd <samplevnf>/VNFs/vACL
- make clean
- make
- The vACL executable will be created at the following location
- <samplevnf>/VNFs/vACL/build/vACL
+ * http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
+ * unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
+ * cd dpdk
+ * make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
+ * cd x86_64-native-linuxapp-gcc
+ * make -j
+ 2. Add this to Go to /etc/default/grub configuration file to setup hugepages.
+ * Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048” to the GRUB_CMDLINE_LINUX entry.
+ 3. Setup Environment Variable
+ * export RTE_SDK=<samplevnf>/dpdk
+ * export RTE_TARGET=x86_64-native-linuxapp-gcc
+ * export VNF_CORE=<samplevnf> or using ./tools/setenv.sh
+ 4. Build SampleVNFs e.g, vACL
+ * cd <samplevnf>/VNFs/vACL
+ * make clean
+ * make
+ * The vACL executable will be created at the following location
+ <samplevnf>/VNFs/vACL/build/vACL
2) Standalone virtualization/Openstack:
Build VM image from script in yardstick
-
::
-
- 1) git clone https://git.opnfv.org/yardstick
- 2) cd yardstick and run
- ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
+ 1) git clone https://git.opnfv.org/samplevnf
+ 2) cd samplevnf and run
+ ./tools/samplevnf-img-dpdk-samplevnf-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
+ Image available in: /tmp/workspace/samplevnf/xenial-server-cloudimg-amd64-disk1.img
To run VNFs. Please refer chapter `05-How_to_run_SampleVNFs.rst`
diff --git a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
index 29c76e69..7ba25fe1 100644
--- a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
+++ b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst
@@ -32,7 +32,6 @@ Hardware & Software Ingredients
SUT requirements:
-
+-----------+------------------+
| Item | Description |
+-----------+------------------+
@@ -42,14 +41,13 @@ SUT requirements:
+-----------+------------------+
| OS | Ubuntu 16.04 LTS |
+-----------+------------------+
- | kernel | 4.4.0-34-generic|
+ | kernel | 4.4.0-34-generic |
+-----------+------------------+
| DPDK | 17.02 |
+-----------+------------------+
Boot and BIOS settings:
-
+------------------+---------------------------------------------------+
| Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 |
| | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 |
@@ -57,7 +55,7 @@ Boot and BIOS settings:
| | Note: nohz_full and rcu_nocbs is to disable Linux*|
| | kernel interrupts, and it’s import |
+------------------+---------------------------------------------------+
- |BIOS | CPU Power and Performance Policy <Performance> |
+ | BIOS | CPU Power and Performance Policy <Performance> |
| | CPU C-state Disabled |
| | CPU P-state Disabled |
| | Enhanced Intel® Speedstep® Tech Disabled |
@@ -75,13 +73,22 @@ SRIOV or OVS) setup based on the test profile.
The connectivity could be
1) Single port pair : One pair ports used for traffic
+
::
+
e.g. Single port pair link0 and link1 of VNF are used
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
+ For correalted traffic, use below configuration
+ TG_1:port 0 <------> VNF:Port 0
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ (TG_2(UDP_Replay) reflects all the traffic on the given port)
+
2) Multi port pair : More than one pair of traffic
+
::
+
e.g. Two port pair link 0, link1, link2 and link3 of VNF are used
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
@@ -90,8 +97,11 @@ The connectivity could be
For correalted traffic, use below configuration
TG_1:port 0 <------> VNF:Port 0
- VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ VNF:Port 1 <------> TG_2:port 0 (UDP Replay)
+ TG_1:port 1 <------> VNF:Port 2
+ VNF:Port 3 <------> TG_2:port 1 (UDP Replay)
(TG_2(UDP_Replay) reflects all the traffic on the given port)
+
* Bare-Metal
Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run
@@ -114,17 +124,20 @@ Setup Traffic generator
Step 0: Preparing hardware connection
Connect Traffic generator and VNF system back to back as shown in previous section
- TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1
+
+ ::
+
+ TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1
Step 1: Setting up Traffic generator (TRex)
TRex Software preparations
- ^^^^^^^^^^^^^^^^^^^^^^^^^^
- * Install the OS (Bare metal Linux, not VM!)
- * Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest
- * Untar the package: tar -xzf latest
- * Change dir to unzipped TRex
- * Create config file using command: sudo python dpdk_setup_ports.py -i
+ **************************
+ * Install the OS (Bare metal Linux, not VM!)
+ * Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest
+ * Untar the package: tar -xzf latest
+ * Change dir to unzipped TRex
+ * Create config file using command: sudo python dpdk_setup_ports.py -i
In case of Ubuntu 16 need python3
See paragraph config creation for detailed step-by-step
(Refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html)
@@ -140,89 +153,88 @@ Step 2: Procedure to build SampleVNFs
Auto Build
^^^^^^^^^^
-
* Interactive options:
::
- ./tools/vnf_build.sh -i
- Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs.
- It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs.
- Following are the options for setup:
- ----------------------------------------------------------
- Step 1: Environment setup.
- ----------------------------------------------------------
- [1] Check OS and network connection
- [2] Select DPDK RTE version
-
- ----------------------------------------------------------
- Step 2: Download and Install
- ----------------------------------------------------------
- [3] Agree to download
- [4] Download packages
- [5] Download DPDK zip
- [6] Build and Install DPDK
- [7] Setup hugepages
- [8] Download civetweb
-
- ----------------------------------------------------------
- Step 3: Build VNFs
- ----------------------------------------------------------
- [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
-
- [10] Exit Script
+ ./tools/vnf_build.sh -i
+ Follow the steps in the screen from option [1] –> [10] and select option [9] to build the vnfs.
+ It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs.
+
+ Options [8], If RestAPI feature is needed install 'civetweb'
+
+ Following are the options for setup:
+ ----------------------------------------------------------
+ Step 1: Environment setup.
+ ----------------------------------------------------------
+ [1] Check OS and network connection
+ [2] Select DPDK RTE version
+
+ ----------------------------------------------------------
+ Step 2: Download and Install
+ ----------------------------------------------------------
+ [3] Agree to download
+ [4] Download packages
+ [5] Download DPDK zip
+ [6] Build and Install DPDK
+ [7] Setup hugepages
+ [8] Download and Build civetweb
+
+ ----------------------------------------------------------
+ Step 3: Build VNFs
+ ----------------------------------------------------------
+ [9] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX)
+
+ [10] Exit Script
* Non-Interactive options:
::
- ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
+ ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02>
+ if system is behind the proxy
+ ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02> -p=<proxy>
Manual Build
^^^^^^^^^^^^
::
- 1) Download DPDK supported version from dpdk.org
- http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
- unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
- cd dpdk
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
- make
-
- 2) Download civetweb 1.9 version from the following link
- https://sourceforge.net/projects/civetweb/files/1.9/CivetWeb_V1.9.zip
- unzip CivetWeb_V1.9.zip
- mv civetweb-master civetweb
- cd civetweb
- make lib
-
- 3) Setup huge pages
- For 1G/2M hugepage sizes, for example 1G pages, the size must be
- specified explicitly and can also be optionally set as the
- default hugepage size for the system. For example, to reserve 8G
- of hugepage memory in the form of eight 1G pages, the following
- options should be passed to the kernel: * default_hugepagesz=1G
- hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048
- 4) Add this to Go to /etc/default/grub configuration file.
- Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048”
- to the GRUB_CMDLINE_LINUX entry.
- 5) Setup Environment Variable
- export RTE_SDK=<samplevnf>/dpdk
- export RTE_TARGET=x86_64-native-linuxapp-gcc
- export VNF_CORE=<samplevnf>
- or using ./tools/setenv.sh
- 6) Build VNFs
- cd <samplevnf>
- make
- or to build individual VNFs
- cd <samplevnf>/VNFs/
- make clean
- make
- The vFW executable will be created at the following location
- <samplevnf>/VNFs/vFW/build/vFW
+ 1) Download DPDK supported version from dpdk.org
+ * http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip
+ * unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions)
+ * cd dpdk
+ * make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
+ * cd x86_64-native-linuxapp-gcc
+ * make
+
+ 2) Download civetweb 1.9 version from the following link
+ * https://sourceforge.net/projects/civetweb/files/1.9/CivetWeb_V1.9.zip
+ * unzip CivetWeb_V1.9.zip
+ * mv civetweb-master civetweb
+ * cd civetweb
+ * make lib
+
+ 3) Add this to Go to /etc/default/grub configuration file to setup higepages.
+ * Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048” to the GRUB_CMDLINE_LINUX entry.
+ * execute update-grub
+ * Reboot after grub setup
+
+ 4) Setup Environment Variable
+ * export RTE_SDK=<samplevnf>/dpdk
+ * export RTE_TARGET=x86_64-native-linuxapp-gcc
+ * export VNF_CORE=<samplevnf> or using ./tools/setenv.sh
+
+ 5) Build VNFs
+ * cd <samplevnf>
+ * make
+ * or To build individual VNFs
+ * cd <samplevnf>/VNFs/
+ * make clean
+ * make
+ * The vFW executable will be created at the following location
+ * <samplevnf>/VNFs/vFW/build/vFW
Virtual Firewall - How to run
@@ -234,58 +246,57 @@ a) Bind ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vFW/config
- Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting.
-
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
-
- ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
-
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- p action add 0 accept
- p action add 0 fwd 0
- p action add 0 count
- p action add 1 accept
- p action add 1 fwd 1
- p action add 1 count
- p action add 2 drop
- p action add 2 count
- p action add 0 conntrack
- p action add 1 conntrack
- p action add 2 conntrack
- p action add 3 conntrack
- ; IPv4 rules
- p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
- p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
- p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
- p vfw applyruleset
-
+ cd <samplevnf>/VNFs/vFW/config
+ Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting.
+
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
+
+ ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ p action add 0 accept
+ p action add 0 fwd 0
+ p action add 0 count
+ p action add 1 accept
+ p action add 1 fwd 1
+ p action add 1 count
+ p action add 2 drop
+ p action add 2 count
+ p action add 0 conntrack
+ p action add 1 conntrack
+ p action add 2 conntrack
+ p action add 3 conntrack
+ ; IPv4 rules
+ p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
+ p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
+ p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
+ p vfw applyruleset
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vFW/
- ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc
+ cd <samplevnf>/VNFs/vFW/
+ ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc
step 4: Run Test using traffic geneator
@@ -319,58 +330,58 @@ a) Bind ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vACL/config
- Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
-
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
-
- ; routeadd <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
-
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- p action add 0 accept
- p action add 0 fwd 0
- p action add 0 count
- p action add 1 accept
- p action add 1 fwd 1
- p action add 1 count
- p action add 2 drop
- p action add 2 count
- p action add 0 conntrack
- p action add 1 conntrack
- p action add 2 conntrack
- p action add 3 conntrack
- ; IPv4 rules
- p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
- p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
- p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
- p acl applyruleset
+ cd <samplevnf>/VNFs/vACL/config
+ Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting.
+
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
+
+ ; routeadd <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ p action add 0 accept
+ p action add 0 fwd 0
+ p action add 0 count
+ p action add 1 accept
+ p action add 1 fwd 1
+ p action add 1 count
+ p action add 2 drop
+ p action add 2 count
+ p action add 0 conntrack
+ p action add 1 conntrack
+ p action add 2 conntrack
+ p action add 3 conntrack
+ ; IPv4 rules
+ p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2
+ p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1
+ p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0
+ p acl applyruleset
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vFW/
- ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc.
+ cd <samplevnf>/VNFs/vFW/
+ ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc.
step 4: Run Test using traffic geneator
@@ -404,70 +415,75 @@ Step 3: Bind the datapath ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Prepare script to enalble VNF to route the packets
::
- cd <samplevnf>/VNFs/vCGNAPT/config
- Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting.
+ cd <samplevnf>/VNFs/vCGNAPT/config
+ Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting.
- link 0 config <VNF port 0 IP eg 202.16.100.10> 8
- link 0 up
- link 1 down
- link 1 config <VNF port 0 IP eg 172.16.40.10> 8
- link 1 up
+ link 0 config <VNF port 0 IP eg 202.16.100.10> 8
+ link 0 up
+ link 1 down
+ link 1 config <VNF port 0 IP eg 172.16.40.10> 8
+ link 1 up
- ; uncomment to enable static NAPT
- ;p <cgnapt pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port>
- ;p 5 entry addm 202.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535
+ ; uncomment to enable static NAPT
+ ;p <cgnapt pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port>
+ ;p 5 entry addm 202.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535
- ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
- routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
- routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
+ ; routeadd <net/host> <port #> <ipv4 nhip address in decimal> <Mask>
+ routeadd net 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000
+ routeadd net 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000
- ; IPv4 static ARP; disable if dynamic arp is enabled.
- p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
- p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
- For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
- (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay)
+ ; IPv4 static ARP; disable if dynamic arp is enabled.
+ p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC>
+ p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC>
+ For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator
+ (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay)
c) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/vCGNAPT/
- ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg -s ./config/sample_swlb_2port_2WT.tc
+ cd <samplevnf>/VNFs/vCGNAPT/
+ ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg -s ./config/sample_swlb_2port_2WT.tc
+ d) Run UDP_replay to reflect the traffic on public side.
-step 4: Run Test using traffic geneator
+ ::
+
+ cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
+ e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
- On traffic generator system:
+step 4: Run Test using traffic geneator
+ On traffic generator system:
::
- cd <trex eg v2.28/stl>
- Update the bench.py to generate the traffic.
+ cd <trex eg v2.28/stl>
+ Update the bench.py to generate the traffic.
- class STLBench(object):
- ip_range = {}
- ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'}
- ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'}
- cd <trex eg v2.28>
- Run the TRex server: sudo ./t-rex-64 -i -c 7
- In another shell run TRex console: trex-console
- The console can be run from another computer with -s argument, --help for more info.
- Other options for TRex client are automation or GUI
- In the console, run "tui" command, and then send the traffic with commands like:
- start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
- For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
+ class STLBench(object):
+ ip_range = {}
+ ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'}
+ ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'}
+ cd <trex eg v2.28>
+ Run the TRex server: sudo ./t-rex-64 -i -c 7
+ In another shell run TRex console: trex-console
+ The console can be run from another computer with -s argument, --help for more info.
+ Other options for TRex client are automation or GUI
+ In the console, run "tui" command, and then send the traffic with commands like:
+ start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1
+ For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html
UDP_Replay - How to run
@@ -479,19 +495,19 @@ Step 3: Bind the datapath ports to DPDK
::
- For DPDK versions 17.xx
- 1) cd <samplevnf>/dpdk
- 2) ./usertools/dpdk-devbind.py --status <--- List the network device
- 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
- .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
+ For DPDK versions 17.xx
+ 1) cd <samplevnf>/dpdk
+ 2) ./usertools/dpdk-devbind.py --status <--- List the network device
+ 3) ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1>
+ .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules
b) Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk.
::
- cd <samplevnf>/VNFs/UDP_Replay/
- cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
- e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
+ cd <samplevnf>/VNFs/UDP_Replay/
+ cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)'
+ e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)'
step 4: Run Test using traffic geneator
@@ -527,22 +543,451 @@ PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
+PROX COMMANDS AND SCREENS
+-------------------------
+
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | *RUNTIME COMMAND* | *DESCRIPTION* | *EXAMPLE* |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | quit | Stop all cores and quit | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | help <substr> | Show list of commands that have <substr> as a substring. | |
+ | | If no substring is provided, all commands are shown. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | verbose <level> | Set the verbosity level of some printed messages. | |
+ | | Possible values are: 0 (default value, error messages only), | verbose 1 |
+ | | 1 (+ warnings), 2 (+ info) and 3 (+ debugging) | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | thread info <core_id> <task_id> | Show task specific information | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | update interval <value> | Update statistics refresh rate, in msec (must be >=10). | |
+ | | Default is 1 second | update interval 500 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rx tx info | Print connections between tasks on all cores | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | start <core list>|all <task_id> | Start cores specified in <core list> or all cores. | start all |
+ | | If <task_id> is not specified, all tasks for the specified cores | start 1 |
+ | | will be started. | start 1s0-4s0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | stop <core list>|all <task_id> | Stop cores specified in <core list> or all cores. | |
+ | | If <task_id> is not specified, all tasks for the specified | stop 1 |
+ | | cores will be stopped. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | dump <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <core_id> | dump 2 1 5 |
+ | | showing how packets have changed between RX and TX. | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | dump_rx <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <coreid> at RX | dump_rx 2 1 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | dump_tx <coreid> <taskid> <nbpkts> | Create a hex dump of <nb_packets> from <task_id> on <coreid> at TX | dump_tx 2 1 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rx distr start | Start gathering statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rx distr stop | Stop gathering statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rx distr reset | Reset gathered statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rx distr show | Display gathered statistical distribution of received packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rate <port id> <queue id> <rate> | Set transmit rate in Mb/s. This does not include preamble, SFD and IFG | rate 0 0 1000 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | count <core id> <task id> <count> | Generate <count> packets, then pause generating | count 1 0 5 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | pkt_size <coreid> <taskid> <pktsize> | Set the packet size to <pkt_size> | pkt_size 1 3 255 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | speed <core_id> <task_id> <speed percentage> | Change the speed to <speed percentage> of a | |
+ | | 10 Gbps line at which packets are being generated | speed 1 0 50 |
+ | | on core <core_id> in task <task_id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | speed_byte <core_id> <task_id> <speed> | Change speed to <speed>. The speed is specified in units of bytes per sec | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | set value <core_id> <task_id> <offset> | Set <value_len> bytes to <value> at offset <offset> in packets | |
+ | <value> <value_len> | generated on <core_id> <task_id> | set value 4 1 14 10 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | reset values all | Undo all `set value` commands on all cores/tasks | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | reset values <core id> <task id> | Undo all `set value` commands on specified core/task | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | arp add <core id> <task id> <port id> | | |
+ | <gre id> <svlan> <cvlan> <ip addr> | | |
+ | <mac addr> <user> | Add a single ARP entry into a CPE table on <core id>/<task id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | rule add <core id> <task id> svlan_id&mask | | |
+ | cvlan_id&mask ip_proto&mask | | |
+ | source_ip/prefix destination_ip/prefix | | |
+ | range dport_range action | Add a rule to the ACL table on <core id>/<task id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | route add <core id> <task id> | | |
+ | <ip/prefix> <next hop id> | Add a route to the routing table on core <core id> <task id> | route add 10.0.16.0/24 9 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | reset stats | Reset all statistics | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | tot stats | Print total RX and TX packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | tot ierrors per sec | Print total number of ierrors per second | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | pps stats | Print RX and TX packet rate in unit of packet per second | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | lat stats <core id> <task id> | Print min,max,avg latency as measured during last sampling interval | lat stats 1 0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | lat packets <core id> <task id> | Print the latency for each of the last set of packets | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | core stats <core id> <task id> | Print rx/tx/drop for task <task id> running on core <core id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | |
+ | | tx_pkts and totals for RX, TX, no_mbufs ierrors for port <port id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | ring info all | Get information about ring, such as ring size and | |
+ | | number of elements in the ring | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | ring info <core id> <task id> | Get information about ring on core <core id> | |
+ | | in task <task id>, such as ring size and number of elements in the ring | ring info 1 0 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port info <port id> [brief] | Get port related information, such as MAC address, socket, | |
+ | | number of descriptors..., . Adding `brief` after command | |
+ | | prints short version of output. | port info 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port up <port id> | Set the port up (all ports are up at startup) | port up 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port down <port id> | Set the port down | port down 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port xstats <port id> | Get extra statistics for the port | port xstats 1 |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | version | Show version | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+ | port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | |
+ | | tx_pkts and totals for RX, TX, no_mbufs ierrors for port <port id> | |
+ +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+
+
+While PROX is running, F1 to F6 change the view on the system. Pressing F1 switches to the main screen showing per core statistics. When PROX is started,
+this is the screen shown by default. Pressing F2 switches to show port-based information. Pressing F3 shows information (i.e. occupancy, memory usage, ...)
+about memory pools. If there are tasks with mode=lat, F4 displays latency measurements made during the last second by each of those tasks.
+F5 displays DPDK ring information. F6 is for L4 generation. If no command has been entered, numbers 1 to 6 can also be used to change the view on the system.
+This is provided to allow changing screens in environments that do not pass function keys to PROX.
+
+Page Up and Page Down can be used to view per core statistics that would otherwise not fit on the screen. Escape quits PROX.
+The history of previously entered commands can be navigated using the Up and Down arrows. Statistics can be reset with F12.
+
+COMMAND LINE OPTIONS
+--------------------
+Run PROX with the "--help" argument to display the usage text and the list of supported options as shown below.
+PROX supports many compilation flags to enable or disable features. For these flags, refer to the Makefile.
+Refer to the README file for more information on how to run PROX for specific use cases.
+
+::
+
+ Usage: ./build/prox [-f CONFIG_FILE] [-l LOG_FILE] [-p] [-o DISPLAY] [-v] [-a|-e] [-m|-s|-i] [-n] [-w DEF] [-q] [-k] [-d] [-z] [-r VAL] [-u] [-t]
+ -f CONFIG_FILE : configuration file to load, ./prox.cfg by default
+ -l LOG_FILE : log file name, ./prox.log by default
+ -p : include PID in log file name if default log file is used
+ -o DISPLAY: Set display to use, can be 'curses' (default), 'cli' or 'none'
+ -v verbosity : initial logging verbosity
+ -a : autostart all cores (by default)
+ -e : don't autostart
+ -n : Create NULL devices instead of using PCI devices, useful together with -i
+ -m : list supported task modes and exit
+ -s : check configuration file syntax and exit
+ -i : check initialization sequence and exit
+ -u : Listen on UDS /tmp/prox.sock
+ -t : Listen on TCP port 8474
+ -q : Pass argument to Lua interpreter, useful to define variables
+ -w : define variable using syntax varname=value
+ takes precedence over variables defined in CONFIG_FILE
+ -k : Log statistics to file "stats_dump" in current directory
+ -d : Run as daemon, the parent process will block until PROX is not initialized
+ -z : Ignore CPU topology, implies -i
+ -r : Change initial screen refresh rate. If set to a lower than 0.001 seconds,
+ screen refreshing will be disabled
+
+CONFIGURATION FILE FORMAT
+-------------------------
+The configuration file is divided into multiple sections, each of which is used to define some parameters and options.
+Sections are created using the [section name] syntax. The list of sections, where # represents an integer, is as follows:
+
+::
+
+ [eal options]
+ [port #]
+ [variables]
+ [defaults]
+ [global]
+ [core #]
+
+In each section, entries are created using the key=value syntax.
+Comments are created using the ; symbol: all characters from the ;
+symbol to the end of line are ignored. A # symbol at the beginning of the section name comments
+the whole section out: all entries in the section are treated as comments and are ignored. For example:
+
+::
+
+ [#core 1]
+ ; this is a comment
+ parameter name=parameter value ; this entry is ignored because the section is commented out
+
+* [EAL OPTIONS]: The following parameters are supported:
+
+::
+
+ -m ; Specifies the amount of memory used. If not provided, all hugepages will be used.
+ -n ; Specifies the number of memory channels. Use -n4 for latest Intel Xeon based platforms
+ -r ; Specifies the number of memory ranks.
+ eal ; Specifies DPDK EAL extra options. Those options will be passed blindly to DPDK.
+
+* [PORT #]: DPDK ports are usually referenced by their port_id, i.e. an integer starting from 0.
+ Using port_id in the configuration file is tedious, since the same port_id can appear at
+ different places (rx port, tx port, routing tables), and those ports might change (e.g. if cables are swapped).
+ In order to make the configuration file easier to read and modify, DPDK ports are given a name with the name= option.
+ The name serves as the reference, and in addition, it will show up in the display at runtime.
+
+::
+
+ PARAMETER EXAMPLE DESCRIPTION
+ ----------------------------------------------------------------------------
+ name inet0 Use inet0 to later refer to this port
+ mac hardware value can be: hardware, random or a literal MAC address
+ rx desc 256 number of descriptors to allocate for reception
+ tx desc 256 number of descriptors to allocate for transmission
+ promiscuous yes enable promiscuous mode
+ strip crc yes enable CRC stripping
+ rss yes enable RSS
+ lsc no While lsc is disabled for drivers known to not provide support,
+ this option explicitely overrides these settings.
+ rx_ring dpdk_ring_name use DPDK ring as an interface (receive side)
+ tx_ring dpdk_ring_name use DPDK ring as an interface (transmit side)
+
+* [VARIABLES]: Variables can be defined in the configuration file using the $varname=value syntax.
+ Variables defined on the command line (-w varname=value) take precedence and do not create
+ conflicts with variables defined in the configuration file. Variables are used in the
+ configuration file using the $varname syntax: each instance of $varname is replaced by its
+ associated value. This is typically useful if the same parameter must be used at several places.
+ For instance, you might want to have multiple load balancers, all transmitting to the same set
+ of worker cores. The list of worker cores could then be defined once in a variable:
+
+::
+
+ [variables]
+ $wk=1s0-5s0
+
+Then, a load balancer definition would use the variable:
+
+::
+
+ [core 6s0]
+ name=LB
+ task=0
+ mode=lbnetwork
+ tx cores=$wk task=0
+ ...
+
+And the section defining the worker cores would be:
+
+::
+
+ [core $wk]
+ name=worker
+ task=0
+ mode=qinqencapv4
+ ...
+
+* [DEFAULTS]: The default value of some options can be overridden using the [defaults] section:
+
+::
+
+ PARAMETER EXAMPLE DESCRIPTION
+ -----------------------------------
+ mempool size 16K number of mbufs per task, relevant when task receives from a port.
+ this is the n argument provided to rte_mempool_create()
+ qinq tag 0xa888 Set qinq tag for all tasks. The result of adding this option is the
+ same as adding qinq tag= to each task
+ memcache size 128 number of mbufs cached per core, default is 256 this is the cache_size
+ argument provided to rte_mempool_create()
+
+* [GLOBAL]: The following parameters are supported:
+
+::
+
+ PARAMETER EXAMPLE DESCRIPTION
+ -------------------------------------------------
+ name BNG Name of the configuration, which will be shown in the title box at runtime.
+ start time 10 Time in seconds after which average statistics will be started.
+ Default value is 0.
+ duration time 30 Runtime duration in seconds, counted after start time.
+ This is typically useful to automate testing using
+ different parameters: PROX automatically exits when the
+ runtime duration has elapsed. Initialization and start time
+ are not included in this runtime duration.
+ For example, if start time is set to 10 and duration time is set to 30,
+ the total execution time (after initialization) will be 40 seconds.
+ Default value is 0, which means infinity and prevents PROX from automatically exiting.
+ shuffle yes When this parameter is set to yes, the order of mbufs
+ within mempools is randomized to simulate a system that has
+ been warmed up. Default value is no.
+ gre cfg /path/to/file.csv Path to CSV file that provides QinQ-to-GRE mapping.
+ Default value is gre_table.csv in same directory as
+ configuration file. Fields are GRE key and QinQ value (computed as SVLAN * 4096 + CVLAN).
+ pre cmd ls Arbitrary system commands to run while reading cfg. This option can occur multiple times.
+ user cfg /path/to/file.csv Path to CSV file that provides QinQ-to-User mapping.
+ Default value is user_table.csv in same directory as configuration file.
+ Fields are SVLAN, CVLAN and User-Id.
+ next hop cfg /path/to/file.csv Path to CSV file that provides Next-Hop details.
+ Default value is next_hop.csv in same directory as configuration file.
+ Fields are Next-Hop index (as returned by LPM lookup),
+ Out-Port index, Next-Hop IP (unused), Next-Hop MAC and MPLS label.
+ ipv4 cfg /path/to/file.csv Path to CSV file that provides IPv4 LPM routing table.
+ Default value is ipv4.csv in same directory as configuration file.
+ Fields are IPv4 subnet (in CIDR notation) and Next-Hop index.
+ dscp cfg /path/to/file.csv Path to CSV file that provides mapping for QoS classification,
+ from DSCP to Traffic Class and Queue.
+ Default value is dscp.csv in same directory as configuration file.
+ Fields are DSCP (0-63), Traffic Class (0-3) and Queue (0-3).
+ ipv6 tunnel cfg /path/to/file.csv Path to CSV file that provides lwAFTR binding table.
+ Default value is ipv6_tun_bind.csv in same directory as configuration file.
+ Fields are lwB4 IPv6 address, next hop MAC address towards lwB4,
+ IPv4 Public address and IPv4 Public Port Set.
+ acl cfg /path/to/file.csv Path to CSV file that provides ACL rules.
+ Default value is rules.csv in same directory as configuration file.
+ Fields are SVLAN value & mask, CVLAN value & mask, IP protocol value & mask,
+ source IPv4 subnet (in CIDR notation), destination IPv4 subnet (in CIDR notation),
+ source port range, destination port range, and action (drop, allow, rate limit).
+ unique mempool yes
+ per socket
+
+* [CORE #]: Cores can be configured by means of a set of [core #] sections, where # represents either:
+
+ an absolute core number: e.g. on a 10-core, dual socket system with hyper-threading, cores are numbered from 0 to 39;
+ a core number, the letter 's', and a socket number: this allows selecting per-socket cores, independently from their interleaved numbering;
+ a core number and the letter 'h': this allows selecting the hyper-thread sibling of the specified core;
+ a dash-separated range of core numbers; a comma-separated list of core numbers; any combination of the above;
+ or a variable whose value complies with the above syntax.
+ The socket and hyper-thread syntax makes it easier to use the same configuration file on several platforms,
+ even if their core numbering differs (e.g. interleaving rule or number of cores per socket).
+
+ Each core can be assigned with a set of tasks, each running one of the implemented packet processing modes.
+
+The following parameters are supported:
+
+.. image:: images/prox_core.png
+ :width: 800px
+ :alt: SampleVNF supported topology
+
Compiling and running this application
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+PREREQUISITES
+^^^^^^^^^^^^^
+DPDK must be installed prior to running make in the PROX directory.
+The README file shipped with PROX describes what versions of DPDK are supported,
+and if any patches are needed for the chosen DPDK version.
+
+The following packages need to be installed. (Example for destributions that are using rpm)
+
+::
+
+ sudo yum install net-tools wget gcc unzip libpcap-devel ncurses-devel libedit-devel pciutils lua-devel kernel-devel
+ Jump Start
+
+The following instructions are here to help customers to start using PROX.
+It's by no means a complete guide, for detailed instructions on how to install and use
+DPDK please refer to its documentation.
+Your mileage may vary depending on a particular Linux distribution and hardware in use.
+
+Edit grub default configuration:
+
+::
+
+ vi /etc/default/grub
+
+Add the following to the kernel boot parameters
+
+::
+
+ default_hugepagesz=1G hugepagesz=1G hugepages=8
+
+Rebuild grub config and reboot the system:
+
+::
+
+ grub2-mkconfig -o /boot/grub2/grub.cfg
+ reboot
+
+Verify that hugepages are available
+
+::
+
+ cat /proc/meminfo
+ ...
+ HugePages_Total: 8
+ HugePages_Free: 8
+ Hugepagesize: 1048576 kB
+ ...
+
+Re-mount huge pages
+
+::
+
+ mkdir -p /mnt/huge
+ umount `awk '/hugetlbfs/ { print $2 }' /proc/mounts` >/dev/null 2>&1
+ mount -t hugetlbfs nodev /mnt/huge/
+
This application supports DPDK 16.04, 16.11, 17.02 and 17.05.
The following commands assume that the following variables have been set:
export RTE_SDK=/path/to/dpdk
export RTE_TARGET=x86_64-native-linuxapp-gcc
-Example: DPDK 17.05 installation
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+PROX Compiation installation
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+* git clone https://git.opnfv.org/samplevnf
+* cd samplevnf
+* export RTE_SDK=`pwd`/dpdk
+* export RTE_TARGET=x86_64-native-linuxapp-gcc
* git clone http://dpdk.org/git/dpdk
* cd dpdk
* git checkout v17.05
* make install T=$RTE_TARGET
+* cd <samplevnf>/VNFs/DPPD-PROX
+* make
+
+or Auto build
+
+::
+
+ * git clone https://git.opnfv.org/samplevnf
+ * cd samplevnf
+ * ./tools/vnf_build.sh -s -d='17.05' [-p=<proxy> if behind the proxy]
+
+Load uio module
+
+::
+
+ lsmod | grep -w "^uio" >/dev/null 2>&1 || sudo modprobe uio
+ sleep 1
+
+Load igb_uio module
+
+::
+
+ lsmod | grep -w "^igb_uio" >/dev/null 2>&1 || sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
+
+Discover network devices available on the system:
+
+::
+
+ lspci | grep Ethernet
+
+Prior launching PROX, ports that are to be used by it must be bound to the igb_uio driver.
+
+The following command will bind all Intel® Ethernet Converged Network Adapter X710 ports to igb_uio:
+
+::
+
+ lspci | grep X710 | cut -d' ' -f 1 | sudo xargs -I {} python2.7 $RTE_UNBIND --bind=igb_uio {}
+
+The following command will bind all Intel® 82599 10 Gigabit Ethernet Controller ports to igb_uio:
+
+::
+
+ lspci | grep 82599 | cut -d' ' -f 1 | sudo xargs -I {} python2.7 $RTE_UNBIND --bind=igb_uio {}
PROX compilation
^^^^^^^^^^^^^^^^
@@ -592,6 +1037,8 @@ application is configured using a .cfg file. The core mask and number
of channels is derived from this config. For example, to run the
application from the source directory execute:
+::
+
user@target:~$ ./build/prox -f ./config/nop.cfg
Provided example configurations
@@ -604,24 +1051,32 @@ A quick description of these example configurations is provided below.
Additional details are provided in the example configuration files.
Basic configurations, mostly used as sanity check:
-- config/nop.cfg
-- config/nop-rings.cfg
-- gen/nop-gen.cfg
+
+::
+
+ * config/nop.cfg
+ * config/nop-rings.cfg
+ * gen/nop-gen.cfg
Simplified BNG (Border Network Gateway) configurations, using different
number of ports, with and without QoS, running on the host or in a VM:
-- config/bng-4ports.cfg
-- config/bng-8ports.cfg
-- config/bng-qos-4ports.cfg
-- config/bng-qos-8ports.cfg
-- config/bng-1q-4ports.cfg
-- config/bng-ovs-usv-4ports.cfg
-- config/bng-no-cpu-topology-4ports.cfg
-- gen/bng-4ports-gen.cfg
-- gen/bng-8ports-gen.cfg
-- gen/bng-ovs-usv-4ports-gen.cfg
+
+::
+
+ * config/bng-4ports.cfg
+ * config/bng-8ports.cfg
+ * config/bng-qos-4ports.cfg
+ * config/bng-qos-8ports.cfg
+ * config/bng-1q-4ports.cfg
+ * config/bng-ovs-usv-4ports.cfg
+ * config/bng-no-cpu-topology-4ports.cfg
+ * gen/bng-4ports-gen.cfg
+ * gen/bng-8ports-gen.cfg
+ * gen/bng-ovs-usv-4ports-gen.cfg
Light-weight AFTR configurations:
-- config/lw_aftr.cfg
-- gen/lw_aftr-gen.cfg
+::
+
+ * config/lw_aftr.cfg
+ * gen/lw_aftr-gen.cfg
diff --git a/docs/testing/user/userguide/06-How_to_use_REST_api.rst b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
index 53726464..b8c0cbea 100644
--- a/docs/testing/user/userguide/06-How_to_use_REST_api.rst
+++ b/docs/testing/user/userguide/06-How_to_use_REST_api.rst
@@ -4,11 +4,11 @@
.. (c) opnfv, national center of scientific research "demokritos" and others.
========================================================
-REST API - Readme
+REST API
========================================================
Introduction
-===============
+---------------
As the internet industry progresses creating REST API becomes more concrete
with emerging best Practices. RESTful web services don’t follow a prescribed
standard except fpr the protocol that is used which is HTTP, its important
@@ -30,7 +30,7 @@ Here are important points to be considered:
REST API in SampleVNF
-=====================
+---------------------
In SampleVNF project VNF’s are run under different contexts like BareMetal,
SRIOV, OVS & Openstack etc. It becomes difficult to interact with the
@@ -45,7 +45,7 @@ REST api on VNF’s will help adapting with the new automation techniques
being adapted in yardstick.
Web server integration with VNF’s
-==================================
+----------------------------------
In order to implement REST api’s in VNF one of the first task is to
identify a simple web server that needs to be integrated with VNF’s.
@@ -65,243 +65,203 @@ Civetweb exposes a few functions which are used to resgister custom handlers
for different URI’s that are implemented.
Typical usage is shown below
-
-VNF Application init()
-=========================
-
-Initialize the civetweb library
-================================
-
-mg_init_library(0);
-
-Start the web server
-=====================
-ctx = mg_start(NULL, 0, options);
-
-
-Once the civetweb server is started we can register our URI’s as show below
-mg_set_request_handler(ctx, "/config", static_cfg_handler, 0);
-
-In the above example “/config” is the URI & static_cfg_handler() is
-the handler that gets called when a user invokes this URI through
-the HTTP client. API's have been mostly implemented for existing VNF's
-like vCGNAPT, vFW & vACL. you might want to implement custom handlers
-for your VNF.
-
URI definition for different VNF’s
-===================================
-
-
-URI REST Method Arguments Description
-===========================================================================================================================
-/vnf GET None Displays top level methods available
-
-/vnf/config GET None Displays the current config set
- POST pci_white_list: Command success/failure
- num_worker(o):
- vnf_type(o):
- pkt_type (o):
- num_lb(o):
- sw_lb(o):
- sock_in(o):
- hyperthread(o) :
-
-/vnf/config/arp GET None Displays ARP/ND info
- POST action: <add/del/req> Command success/failure
- ipv4/ipv6: <address>
- portid: <>
- macaddr: <> for add
-
-/vnf/config/link GET None
- POST link_id:<> Command success/failure
- state: <1/0>
-
-/vnf/config/link/<link id> GET None
- POST ipv4/ipv6: <address> Command success/failure
- depth: <>
-
-
-/vnf/config/route GET None Displays gateway route entries
- POST portid: <> Adds route entries for default gateway
- nhipv4/nhipv6: <addr>
- depth: <>
- type:"net/host"
-
-/vnf/config/rules(vFW/vACL only) GET None Displays the methods /load/clear
-/vnf/config/rules/load GET None Displays if file was loaded
- PUT <script file
- with cmds> Executes each command from script file
-/vnf/config/rules/clear GET None Command success/failure clear the stat
-
-/vnf/config/nat(vCGNAPT only) GET None Displays the methods /load/clear
-/vnf/config/nat/load GET None Displays if file was loaded
- PUT <script file
- with commands> Executes each command from script file
-
-/vnf/config/nat/clear GET None Command success/failure clear the stats
-/vnf/log GET None This needs to be implemented for each VNF
- just keeping this as placeholder.
-
-/vnf/dbg GET None Will display methods supported like /pipelines/cmd
-/vnf/dbg/pipelines GET None Displays pipeline information(names)
- of each pipelines
-/vnf/dbg/pipelines/<pipe id> GET None Displays debug level for particular pipeline
-
-/vnf/dbg/cmd GET None Last executed command parameters
- POST cmd: Command success/failure
- dbg:
- d1:
- d2:
-
-API Usage
-===============
-
-1. Initialization
-================
-
-In order to integrate to your VNF these are the steps required
-
-In your VNF application init
-
-
-#ifdef REST_API_SUPPORT
- Initialize the rest api
- struct mg_context *ctx = rest_api_init(&app);
-#endif
-
-
-#ifdef REST_API_SUPPORT
- rest api's for cgnapt
- rest_api_<vnf>_init(ctx, &app);
-#endif
-
-
-void rest_api_<vnf>_init(struct mg_context *ctx, struct app_params *app)
-{
- myapp = app;
+==================================
- VNF specific command registration
- mg_set_request_handler(,,,);
-}
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| *URI* | *Method* | *Arguments* | *description* |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf* | GET | None | Displays top level methods available |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config* | GET | None | Displays the current config set |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config* | POST | | |
+| | | pci_white_list | |
+| | | num_worker(o) | |
+| | | vnf_type(o) | |
+| | | pkt_type (o) | |
+| | | num_lb(o) | |
+| | | sw_lb(o) | |
+| | | sock_in(o) | |
+| | | hyperthread(o) | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/arp* | GET | None | Displays ARP/ND info |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/arp* | POST | action: <add/del/req> | |
+| | | ipv4/ipv6: <address> | |
+| | | portid: <> | |
+| | | macaddr: <> for add | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/link* | GET | None | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/link* | POST | link_id:<> | |
+| | | state: <1/0> | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/link/<link id>* | GET | None | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/link/<link id>* | POST | ipv4/ipv6: <address> | |
+| | | depth: <> | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/route* | GET | None | Displays gateway route entries |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/route* | POST | portid: <> | Adds route entries for default gateway |
+| | | nhipv4/nhipv6: <addr> | |
+| | | depth: <> | |
+| | | type:"net/host" | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/rules(vFW/vACL)* | GET | None | Displays the methods /load/clear |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/rules/load* | GET | None | Displays if file was loaded |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/rules/load* | PUT | <script file | |
+| | | with cmds> | Executes each command from script file |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/rules/clear* | GET | None | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/nat(vCGNAPT only)* | GET | None | Displays the methods /load/clear |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/nat/load* | GET | None | Displays if file was loaded |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/rules/load* | PUT | <script file with cmds> | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/config/nat/clear* | GET | None | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/log* | GET | None | This needs to be implemented for each VNF |
+| | | | just keeping this as placeholder. |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/dbg* | GET | None | Will display methods supported like /pipelines/cmd |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/dbg/pipelines* | GET | None | Displays pipeline information(names) |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/dbg/pipelines/<pipe id>* | GET | None | Displays debug level for particular pipeline |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/dbg/cmd* | GET | None | Last executed command parameters |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+| */vnf/dbg/cmd* | POST | cmd: | |
+| | | dbg: | |
+| | | d1: | |
+| | | d2: | |
++---------------------------------+-----------+--------------------------+----------------------------------------------------+
+
+ PUT/POST - Command success/failure
+API Usage
+---------
-2. Run time Usage
-====================
+Run time Usage
+^^^^^^^^^^^^^^
An application(say vFW) with REST API support is run as follows
with just PORT MASK as input. The following environment variables
need to be set before launching the application(To be run from
samplevnf directory).
-export VNF_CORE=`pwd`
-export RTE_SDK=`pwd`/dpdk-16.04
-export RTE_TARGET=x86_64-native-linuxapp-gcc
+ ::
-./build/vFW (Without the -f & -s option)
+ ./build/vFW (Without the -f & -s option)
-1. When VNF(vCGNAPT/vACL/vFW) is launched it waits for user to provide the
-/vnf/config REST method. A typical curl command if used will look like below
-shown. This with minimal parameter. For more options please refer to above REST
-methods table.
+1. When VNF(vCGNAPT/vACL/vFW) is launched it waits for user to provide the /vnf/config REST method.
+ ::
-e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:08:00.0
- 0000:08:00.1"}' http://<IP>/vnf/config
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:08:00.0 0000:08:00.1"}' http://<IP>/vnf/config
-Note: the config is mostly implemented based on existing VNF's. if new parameters
-are required in the config we need to add that as part of the vnf_template.
+ Note: the config is mostly implemented based on existing VNF's. if new parameters
+ are required in the config we need to add that as part of the vnf_template.
-Once the config is provided the application gets launched.
+ Once the config is provided the application gets launched.
-Note for CGNAPT we can add public_ip_port_range as follows, the following e.g gives
-a multiport configuration with 4 ports, 2 load balancers, worker threads 10, multiple
-public_ip_port_range being added, please note the "/" being used to seperate multiple
-inputs for public_ip_port_range.
+ Note for CGNAPT we can add public_ip_port_range as follows, the following e.g gives
+ a multiport configuration with 4 ports, 2 load balancers, worker threads 10, multiple
+ public_ip_port_range being added, please note the "/" being used to seperate multiple
+ inputs for public_ip_port_range.
-e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:05:00.0 0000:05:00.2 0000:07:00.0 0000:07:00.2",
- "num_lb":"2", "num_worker":"10","public_ip_port_range_0": "04040000:(1, 65535)/04040001:(1, 65535)",
- "public_ip_port_range_1": "05050000:(1, 65535)/05050001:(1, 65535)" }' http://10.223.197.179/vnf/config
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"pci_white_list": "0000:05:00.0 0000:05:00.2 0000:07:00.0 0000:07:00.2",
+ "num_lb":"2", "num_worker":"10","public_ip_port_range_0": "04040000:(1, 65535)/04040001:(1, 65535)",
+ "public_ip_port_range_1": "05050000:(1, 65535)/05050001:(1, 65535)" }' http://10.223.197.179/vnf/config
2. Check the Link IP's using the REST API (vCGNAPT/vACL/vFW)
-e.g curl <IP>/vnf/config/link
+ ::
+ e.g curl <IP>/vnf/config/link
-This would indicate the number of links enabled. You should enable all the links
-by using following curl command for links 0 & 1
+ This would indicate the number of links enabled. You should enable all the links
+ by using following curl command for links 0 & 1
-e.g curl -X POST -H "Content-Type:application/json" -d '{"linkid": "0", "state": "1"}'
-http://<IP>/vnf/config/link
-curl -X POST -H "Content-Type:application/json" -d '{"linkid": "1", "state": "1"}'
-http://<IP>/vnf/config/link
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"linkid": "0", "state": "1"}'
+ http://<IP>/vnf/config/link
+ curl -X POST -H "Content-Type:application/json" -d '{"linkid": "1", "state": "1"}'
+ http://<IP>/vnf/config/link
3. Now that links are enabled we can configure IP's using link method as follows (vCGNAPT/vACL/vFW)
+ ::
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"<IP to be configured>","depth":"24"}'
+ http://<IP>/vnf/config/link/0
+ curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"IP to be configured","depth":"24"}'
+ http://<IP>/vnf/config/link/1
-e.g curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"<IP to be configured>","depth":"24"}'
-http://<IP>/vnf/config/link/0
-curl -X POST -H "Content-Type:application/json" -d '{"ipv4":"IP to be configured","depth":"24"}'
-http://<IP>/vnf/config/link/1
-
-Once the IP's are set in place time to add NHIP for ARP Table. This is done using for all the ports
-required.
-/vnf/config/route
+ Once the IP's are set in place time to add NHIP for ARP Table. This is done using for all the ports required.
+ /vnf/config/route
-curl -X POST -H "Content-Type:application/json" -d '{"portid":"0", "nhipv4":"IPV4 address",
- "depth":"8", "type":"net"}' http://<IP>/vnf/config/route
+ curl -X POST -H "Content-Type:application/json" -d '{"portid":"0", "nhipv4":"IPV4 address",
+ "depth":"8", "type":"net"}' http://<IP>/vnf/config/route
4. Adding arp entries we can use this method (vCGNAPT/vACL/vFW)
-/vnf/config/arp
+ ::
+ /vnf/config/arp
-e.g
-
-curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"202.16.100.20",
+ e.g
+ curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"202.16.100.20",
"portid":"0", "macaddr":"00:00:00:00:00:01"}'
http://10.223.166.213/vnf/config/arp
-curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"172.16.40.20",
+ curl -X POST -H "Content-Type:application/json" -d '{"action":"add", "ipv4":"172.16.40.20",
"portid":"1", "macaddr":"00:00:00:00:00:02"}'
http://10.223.166.213/vnf/config/arp
5. Adding route entries we can use this method (vCGNAPT/vACL/vFW)
-vnf/config/route
+ ::
+ /vnf/config/route
-e.g curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":"8", "nhipv4":"202.16.100.20",
+ e.g curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":"8", "nhipv4":"202.16.100.20",
"portid":"0"}' http://10.223.166.240/vnf/config/route
-curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":8", "nhipv4":"172.16.100.20",
+ curl -X POST -H "Content-Type:application/json" -d '{"type":"net", "depth":8", "nhipv4":"172.16.100.20",
"portid":"1"}' http://10.223.166.240/vnf/config/route
5. In order to load the rules a script file needs to be posting a script.(vACL/vFW)
-/vnf/config/rules/load
+ ::
+ /vnf/config/rules/load
-Typical example for loading a script file is shown below
-curl -X PUT -F 'image=@<path to file>' http://<IP>/vnf/config/rules/load
+ Typical example for loading a script file is shown below
+ curl -X PUT -F 'image=@<path to file>' http://<IP>/vnf/config/rules/load
-typically arpadd/routeadd commands can be provided as part of this to
-add static arp entries & adding route entries providing the NHIP's.
+ typically arpadd/routeadd commands can be provided as part of this to
+ add static arp entries & adding route entries providing the NHIP's.
6. The following REST api's for runtime configuring through a script (vCGNAPT Only)
-/vnf/config/rules/clear
-/vnf/config/nat
-/vnf/config/nat/load
+ ::
+ /vnf/config/rules/clear
+ /vnf/config/nat
+ /vnf/config/nat/load
7. For debug purpose following REST API's could be used as described above.(vCGNAPT/vACL/vFW)
+ ::
+ /vnf/dbg
+ e.g curl http://10.223.166.240/vnf/config/dbg
-/vnf/dbg
-
-e.g curl http://10.223.166.240/vnf/config/dbg
+ /vnf/dbg/pipelines
+ e.g curl http://10.223.166.240/vnf/config/dbg/pipelines
-/vnf/dbg/pipelines
-e.g curl http://10.223.166.240/vnf/config/dbg/pipelines
+ /vnf/dbg/pipelines/<pipe id>
+ e.g curl http://10.223.166.240/vnf/config/dbg/pipelines/<id>
-/vnf/dbg/pipelines/<pipe id>
-e.g curl http://10.223.166.240/vnf/config/dbg/pipelines/<id>
-
-/vnf/dbg/cmd
+ /vnf/dbg/cmd
8. For stats we can use the following method (vCGNAPT/vACL/vFW)
-
-/vnf/stats
-e.g curl <IP>/vnf/stats
+ ::
+ /vnf/stats
+ e.g curl <IP>/vnf/stats
9. For quittiong the application (vCGNAPT/vACL/vFW)
-/vnf/quit
-
-e.g curl <IP>/vnf/quit
+ ::
+ /vnf/quit
+ e.g curl <IP>/vnf/quit
diff --git a/docs/testing/user/userguide/07-Config_files.rst b/docs/testing/user/userguide/07-Config_files.rst
index 9061ee57..d5564e8d 100644
--- a/docs/testing/user/userguide/07-Config_files.rst
+++ b/docs/testing/user/userguide/07-Config_files.rst
@@ -20,9 +20,129 @@ Following are the example configuration files for sampleVNFs.
vCGNAPT Config files
--------------------
+The reference configuration files explained here are for Software and Hardware
+loadbalancing with IPv4 traffic type and single port pair.
+For other configurations liek IPv6 and Multi-port, refer to example config
+files provided as part of the source code in config(VNFs/vCGNAPT/config) folder
+of the VNFs.
+
+1. SWLB, IPv4, Single Port Pair, 1WT:
+
+ ::
+
+ [EAL]
+ w = 05:00.0
+ w = 05:00.1
+
+ [PIPELINE0]
+ type = MASTER
+ core = 0
+ [PIPELINE1]
+ type = ARPICMP
+ core = 1
+ pktq_in = SWQ0
+ pktq_out = SWQ7
+
+ pktq_in_prv = RXQ0.0
+ prv_to_pub_map = (0, 1)
+ [PIPELINE2]
+ type = TIMER
+ core = 2
+ n_flows = 1048576
+ [PIPELINE3]
+ type = TXRX
+ core = 3
+ pipeline_txrx_type = RXRX
+ dest_if_offset = 176
+ pktq_in = RXQ0.0 RXQ1.0
+ pktq_out = SWQ1 SWQ2 SWQ0
+
+ [PIPELINE4]
+ type = LOADB
+ core = 4
+ pktq_in = SWQ1 SWQ2
+ pktq_out = SWQ3 SWQ4
+ outport_offset = 136; 8
+ n_vnf_threads = 1
+ prv_que_handler = (0,)
+
+ [PIPELINE5]
+ type = CGNAPT
+ core = 5
+ pktq_in = SWQ3 SWQ4
+ pktq_out = SWQ5 SWQ6
+ phyport_offset = 204
+ n_flows = 1048576
+ key_offset = 192;64
+ key_size = 8
+ hash_offset = 200;72
+ timer_period = 100
+ max_clients_per_ip = 65535
+ max_port_per_client = 10
+ public_ip_port_range = 98103214:(1, 65535)
+ vnf_set = (3,4,5)
+ pkt_type = ipv4
+ cgnapt_meta_offset = 128
+ prv_que_handler = (0,)
+
+ [PIPELINE6]
+ type = TXRX
+ core = 6
+ pipeline_txrx_type = TXTX
+ dest_if_offset = 176
+ pktq_in = SWQ5 SWQ6
+ pktq_out = TXQ0.0 TXQ1.0
+
+2. HWLB, IPv4, Single Port Pair, 1 WT:
+
+This configuration doesn't require LOADB and TXRX pipelines
+
+::
+
+ [EAL]
+ w = 05:00.0
+ w = 05:00.1
+
+ [PIPELINE0]
+ type = MASTER
+ core = 0
+
+ [PIPELINE1]
+ type = ARPICMP
+ core = 1
+ pktq_in = SWQ0
+ pktq_out = TXQ0.0 TXQ1.0
+
+
+ pktq_in_prv = RXQ0.0
+ prv_to_pub_map = (0, 1)
+
+ [PIPELINE2]
+ type = TIMER
+ core = 2
+ n_flows = 1048576
+
+ [PIPELINE3]
+ type = CGNAPT
+ core = 3
+ pktq_in = RXQ0.0 RXQ1.0
+ pktq_out = TXQ0.1 TXQ1.1 SWQ0
+ phyport_offset = 204
+ n_flows = 1048576
+ key_offset = 192;64
+ key_size = 8
+ hash_offset = 200;72
+ timer_period = 100
+ max_clients_per_ip = 65535
+ max_port_per_client = 10
+ public_ip_port_range = 98103214:(1, 65535)
+ vnf_set = (3,4,5)
+ pkt_type = ipv4
+ cgnapt_meta_offset = 128
+ prv_que_handler = (0,)
vFW Config files
----------------
@@ -355,6 +475,3 @@ of the VNFs.
n_flows = 1000000
pkt_type = ipv4
traffic_type = 4
-
-
-
diff --git a/docs/testing/user/userguide/images/prox_core.png b/docs/testing/user/userguide/images/prox_core.png
new file mode 100644
index 00000000..5d85454d
--- /dev/null
+++ b/docs/testing/user/userguide/images/prox_core.png
Binary files differ