summaryrefslogtreecommitdiffstats
path: root/VNFs/DPPD-PROX
diff options
context:
space:
mode:
authorXavier Simonart <xavier.simonart@intel.com>2018-12-19 15:30:38 +0100
committerXavier Simonart <xavier.simonart@intel.com>2019-02-20 16:32:05 +0100
commitdeae87b73684b3a7a96c64c918c0342a52262744 (patch)
tree25c569b8a231132ed4f34a564901d9140b77c5fd /VNFs/DPPD-PROX
parent06d71cb8ceab4d531a29b09c589eeda7bd4e6311 (diff)
Use link speed from device capability instead of negotiated speeda
JIRA: SAMPLEVNF-151 link speed is used in gen and lat latency extrapolations. Using a link_speed value lower than the actual link speed might result in errors (e.g. negative latencies). Negotiated link speed might be reported slowly (as reported through irq) Hence it is better to use the device capability link speed. In addition, this remove the check for link speed changes in fastpath. Change-Id: I0f475fe5e139b046012de6cd0b710e4390735078 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Diffstat (limited to 'VNFs/DPPD-PROX')
-rw-r--r--VNFs/DPPD-PROX/handle_gen.c13
-rw-r--r--VNFs/DPPD-PROX/handle_lat.c14
-rw-r--r--VNFs/DPPD-PROX/prox_port_cfg.c71
-rw-r--r--VNFs/DPPD-PROX/run.c9
4 files changed, 94 insertions, 13 deletions
diff --git a/VNFs/DPPD-PROX/handle_gen.c b/VNFs/DPPD-PROX/handle_gen.c
index 4040b33..000d017 100644
--- a/VNFs/DPPD-PROX/handle_gen.c
+++ b/VNFs/DPPD-PROX/handle_gen.c
@@ -642,6 +642,8 @@ static int handle_gen_bulk(struct task_base *tbase, struct rte_mbuf **mbufs, uin
int i, j;
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
+ // On more recent DPDK, we use the speed_capa of the port, and not the negotiated speed
// If link is down, link_speed is 0
if (unlikely(task->link_speed == 0)) {
if (task->port && task->port->link_speed != 0) {
@@ -651,6 +653,7 @@ static int handle_gen_bulk(struct task_base *tbase, struct rte_mbuf **mbufs, uin
} else
return 0;
}
+#endif
task_gen_update_config(task);
@@ -1197,6 +1200,7 @@ static void start(struct task_base *tbase)
if (task->port) {
// task->port->link_speed reports the link speed in Mbps e.g. 40k for a 40 Gbps NIC.
// task->link_speed reports link speed in Bytes per sec.
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
// It can be 0 if link is down, and must hence be updated in fast path.
task->link_speed = task->port->link_speed * 125000L;
if (task->link_speed)
@@ -1205,6 +1209,15 @@ static void start(struct task_base *tbase)
else
plog_info("\tPort %u: link speed is %ld Mbps - link might be down\n",
(uint8_t)(task->port - prox_port_cfg), 8 * task->link_speed / 1000000);
+#else
+ if (task->port->link_speed == UINT32_MAX)
+ task->link_speed = UINT64_MAX;
+ else {
+ task->link_speed = task->port->link_speed * 125000L;
+ plog_info("\tPort %u: link max speed is %ld Mbps\n",
+ (uint8_t)(task->port - prox_port_cfg), 8 * task->link_speed / 1000000);
+ }
+#endif
}
/* TODO
Handle the case when two tasks transmit to the same port
diff --git a/VNFs/DPPD-PROX/handle_lat.c b/VNFs/DPPD-PROX/handle_lat.c
index 8c7de8f..0273230 100644
--- a/VNFs/DPPD-PROX/handle_lat.c
+++ b/VNFs/DPPD-PROX/handle_lat.c
@@ -507,6 +507,8 @@ static int handle_lat_bulk(struct task_base *tbase, struct rte_mbuf **mbufs, uin
struct task_lat *task = (struct task_lat *)tbase;
int rc;
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
+ // On more recent DPDK, we use the speed_capa of the port, and not the negotiated speed
// If link is down, link_speed is 0
if (unlikely(task->link_speed == 0)) {
if (task->port && task->port->link_speed != 0) {
@@ -519,7 +521,7 @@ static int handle_lat_bulk(struct task_base *tbase, struct rte_mbuf **mbufs, uin
return 0;
}
}
-
+#endif
if (n_pkts == 0) {
task->begin = tbase->aux->tsc_rx.before;
return 0;
@@ -729,6 +731,7 @@ static void lat_start(struct task_base *tbase)
if (task->port) {
// task->port->link_speed reports the link speed in Mbps e.g. 40k for a 40 Gbps NIC.
// task->link_speed reports link speed in Bytes per sec.
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
// It can be 0 if link is down, and must hence be updated in fast path.
task->link_speed = task->port->link_speed * 125000L;
if (task->link_speed)
@@ -737,6 +740,15 @@ static void lat_start(struct task_base *tbase)
else
plog_info("\tPort %u: link speed is %ld Mbps - link might be down\n",
(uint8_t)(task->port - prox_port_cfg), 8 * task->link_speed / 1000000);
+#else
+ if (task->port->link_speed == UINT32_MAX)
+ task->link_speed = UINT64_MAX;
+ else {
+ task->link_speed = task->port->link_speed * 125000L;
+ plog_info("\tPort %u: link max speed is %ld Mbps\n",
+ (uint8_t)(task->port - prox_port_cfg), 8 * task->link_speed / 1000000);
+ }
+#endif
}
}
diff --git a/VNFs/DPPD-PROX/prox_port_cfg.c b/VNFs/DPPD-PROX/prox_port_cfg.c
index fc4971f..6dc023d 100644
--- a/VNFs/DPPD-PROX/prox_port_cfg.c
+++ b/VNFs/DPPD-PROX/prox_port_cfg.c
@@ -311,6 +311,20 @@ uint8_t init_rte_ring_dev(void)
static void print_port_capa(struct prox_port_cfg *port_cfg)
{
+ uint8_t port_id;
+
+ port_id = port_cfg - prox_port_cfg;
+ plog_info("\t*** Initializing port %u ***\n", port_id);
+ plog_info("\t\tPort name is set to %s\n", port_cfg->name);
+ plog_info("\t\tPort max RX/TX queue is %u/%u\n", port_cfg->max_rxq, port_cfg->max_txq);
+ plog_info("\t\tPort driver is %s\n", port_cfg->driver_name);
+#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
+ plog_info("\t\tSupported speed mask = 0x%x\n", port_cfg->dev_info.speed_capa);
+ if (port_cfg->link_speed != UINT32_MAX) {
+ plog_info("\t\tHighest link speed capa = %d Mbps\n", port_cfg->link_speed);
+ }
+#endif
+
#if RTE_VERSION >= RTE_VERSION_NUM(18,8,0,1)
plog_info("\t\tRX offload capa = 0x%lx = ", port_cfg->dev_info.rx_offload_capa);
if (port_cfg->dev_info.rx_offload_capa & DEV_RX_OFFLOAD_VLAN_STRIP)
@@ -396,6 +410,48 @@ static void print_port_capa(struct prox_port_cfg *port_cfg)
#endif
}
+static void get_link_speed(struct prox_port_cfg *port_cfg)
+{
+#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
+ port_cfg->link_speed = UINT32_MAX;
+
+ // virtio and vmxnet3 reports fake link_speed
+ if (strcmp(port_cfg->short_name, "vmxnet3") && strcmp(port_cfg->short_name, "virtio")) {
+ // Get link_speed from highest capability from the port
+ // This will be used by gen and lat for extrapolation purposes
+ // The negotiated link_speed (as reported by rte_eth_link_get
+ // or rte_eth_link_get_nowait) might be reported too late
+ // and might result in wrong exrapolation, and hence should not be used
+ // for extrapolation purposes
+ if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_100G)
+ port_cfg->link_speed = ETH_SPEED_NUM_100G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_56G)
+ port_cfg->link_speed = ETH_SPEED_NUM_56G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_50G)
+ port_cfg->link_speed = ETH_SPEED_NUM_50G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_40G)
+ port_cfg->link_speed = ETH_SPEED_NUM_40G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_25G)
+ port_cfg->link_speed = ETH_SPEED_NUM_25G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_20G)
+ port_cfg->link_speed = ETH_SPEED_NUM_20G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_10G)
+ port_cfg->link_speed = ETH_SPEED_NUM_10G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_5G)
+ port_cfg->link_speed = ETH_SPEED_NUM_5G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_2_5G)
+ port_cfg->link_speed = ETH_SPEED_NUM_2_5G;
+ else if (port_cfg->dev_info.speed_capa & ETH_LINK_SPEED_1G)
+ port_cfg->link_speed = ETH_SPEED_NUM_1G;
+ else if (port_cfg->dev_info.speed_capa & (ETH_LINK_SPEED_100M_HD | ETH_LINK_SPEED_100M))
+ port_cfg->link_speed = ETH_SPEED_NUM_100M;
+ else if (port_cfg->dev_info.speed_capa & (ETH_LINK_SPEED_10M_HD | ETH_LINK_SPEED_10M))
+ port_cfg->link_speed = ETH_SPEED_NUM_10M;
+
+ }
+#endif
+}
+
static void init_port(struct prox_port_cfg *port_cfg)
{
static char dummy_pool_name[] = "0_dummy";
@@ -403,15 +459,9 @@ static void init_port(struct prox_port_cfg *port_cfg)
uint8_t port_id;
int ret;
+ get_link_speed(port_cfg);
+ print_port_capa(port_cfg);
port_id = port_cfg - prox_port_cfg;
- plog_info("\t*** Initializing port %u ***\n", port_id);
- plog_info("\t\tPort name is set to %s\n", port_cfg->name);
- plog_info("\t\tPort max RX/TX queue is %u/%u\n", port_cfg->max_rxq, port_cfg->max_txq);
- plog_info("\t\tPort driver is %s\n", port_cfg->driver_name);
-#if RTE_VERSION >= RTE_VERSION_NUM(16,4,0,0)
- plog_info("\t\tSupported speed mask = 0x%x\n", port_cfg->dev_info.speed_capa);
-#endif
-
PROX_PANIC(port_cfg->n_rxq == 0 && port_cfg->n_txq == 0,
"\t\t port %u is enabled but no RX or TX queues have been configured", port_id);
@@ -449,8 +499,6 @@ static void init_port(struct prox_port_cfg *port_cfg)
}
}
- print_port_capa(port_cfg);
-
if (port_cfg->n_rxq > 1) {
// Enable RSS if multiple receive queues
port_cfg->port_conf.rxmode.mq_mode |= ETH_MQ_RX_RSS;
@@ -604,7 +652,10 @@ static void init_port(struct prox_port_cfg *port_cfg)
rte_eth_link_get(port_id, &link);
port_cfg->link_up = link.link_status;
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
port_cfg->link_speed = link.link_speed;
+#endif
+
if (link.link_status) {
plog_info("Link Up - speed %'u Mbps - %s\n",
link.link_speed,
diff --git a/VNFs/DPPD-PROX/run.c b/VNFs/DPPD-PROX/run.c
index 6ffd76b..2ad8aca 100644
--- a/VNFs/DPPD-PROX/run.c
+++ b/VNFs/DPPD-PROX/run.c
@@ -78,9 +78,14 @@ static void update_link_states(void)
port_cfg = &prox_port_cfg[portid];
rte_eth_link_get_nowait(portid, &link);
- port_cfg->link_up = link.link_status;
+#if RTE_VERSION < RTE_VERSION_NUM(16,4,0,0)
+ // On more recent DPDK, we use the speed_capa of the port, and not the negotiated speed
port_cfg->link_speed = link.link_speed;
- plog_info("Link speed now %d Mbps\n", port_cfg->link_speed);
+#endif
+ if (port_cfg->link_up != link.link_status) {
+ port_cfg->link_up = link.link_status;
+ plog_info("port %d: Link speed now %d Mbps\n", portid, link.link_speed);
+ }
}
}