1 files changed, 87 insertions, 0 deletions
diff --git a/docs/configguide/jumpserverinstall.rst b/docs/configguide/jumpserverinstall.rst
new file mode 100644
index 00000000..19a659a2
--- /dev/null
+++ b/docs/configguide/jumpserverinstall.rst
@@ -0,0 +1,87 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) 2016 OPNFV.
+
+
+Jump Server Configuration
+-------------------------
+
+Jump server install procedures are maintained by each installer project. Addional Jump server
+configuraton BKMs will be maintained here. The below install information was used for Fuel however
+may be outdated (please refer to Fuel Installer documents).
+
+**Procedure**
+
+1. Obtain CentOS 7 Minimal ISO and install
+
+  ``wget http://mirrors.kernel.org/centos/7/isos/x86_64/CentOS-7-x86_64-Minimal-1503-01.iso``
+
+2. Set parameters appropriate for your environment during installation
+
+3. Disable NetworkManager
+
+  ``systemctl disable NetworkManager``
+
+4. Configure your /etc/sysconfig/network-scripts/ifcfg-* files for your network
+
+5. Restart networking
+
+  ``service network restart``
+
+6. Edit /etc/resolv.conf and add a nameserver
+
+  ``vi /etc/resolv.conf``
+
+7. Install libvirt & kvm
+
+  ``yum -y update``
+  ``yum -y install kvm qemu-kvm libvirt``
+  ``systemctl enable libvirtd``
+
+8. Reboot:
+
+  ``shutdown -r now``
+
+9. If you wish to avoid annoying delay when use ssh to log in, disable DNS lookups:
+
+  ``vi /etc/ssh/sshd_config``
+
+  Uncomment "UseDNS yes", change 'yes' to 'no'.
+
+  Save
+
+10. Restart sshd
+
+  ``systemctl restart sshd``
+
+11. Install virt-install
+
+  ``yum -y install virt-install``
+
+12. Visit artifacts.opnfv.org and D/L the OPNFV Fuel ISO
+
+13. Create a bridge using the interface on the PXE network, for example: br0
+
+14. Make a directory owned by qemu:
+
+  ``mkdir /home/qemu; mkdir -p /home/qemu/VMs/fuel-6.0/disk``
+
+  ``chown -R qemu:qemu /home/qemu``
+
+15. Copy the ISO to /home/qemu
+
+  ``cd /home/qemu``
+
+  ``virt-install -n opnfv-2015-05-22_18-34-07-fuel -r 4096 --vcpus=4
+  --cpuset=0-3 -c opnfv-2015-05-22_18-34-07.iso --os-type=linux
+  --os-variant=rhel6 --boot hd,cdrom --disk
+  path=/home/qemu/VMs/mirantis-fuel-6.0/disk/fuel-vhd0.qcow2,bus=virtio,size=50,format=qcow2
+  -w bridge=br0,model=virtio --graphics vnc,listen=0.0.0.0``
+
+16. Temporarily flush the firewall rules to make things easier:
+
+  ``iptables -F``
+
+17. Connect to the console of the installing VM with your favorite VNC client.
+
+18. Change the IP settings to match the pod, use an IP in the PXE/Admin network for the Fuel Master