# This configuration file defines Network Environment for a # Baremetal Deployment of OPNFV. It contains default values # for 5 following networks: # # - admin # - tenant* # - external* # - storage* # - api* # *) optional networks # # Optional networks will be consolidated with the admin network # if not explicitly configured. # # See short description of the networks in the comments below. # # "admin" is the short name for Control Plane Network. # During OPNFV deployment it is used for node provisioning which will require # PXE booting as well as running a DHCP server on this network. Be sure to # disable any other DHCP/TFTP server on this network. # # "tenant" is the network used for tenant traffic. # # "external" is the network which should have internet or external # connectivity. External OpenStack networks will be configured to egress this # network. There can be multiple external networks, but only one assigned as # "public" which OpenStack public API's will register. # # "storage" is the network for storage I/O. # # "api" is an optional network for splitting out OpenStack service API # communication. This should be used for IPv6 deployments. network-config-metadata: #Meta data for the network configuration title: LF-POD-1 Network config # version: 0.1 # created: Mon Dec 28 2015 # comment: None # # # # networks: # Network configurations admin: # Admin configuration (pxe and jumpstart), enabled: true vlan: native # VLAN tag to use for Overcloud hosts on this network (Admin network is required to be native / untagged for PXE booting) installer_vm: # Network settings for the Installer VM on admin network nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond members: - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) vlan: native # VLAN tag to use for this network on Installer VM, native means none ip: 192.0.2.1 # IP to assign to Installer VM on this network usable_ip_range: 192.0.2.11,192.0.2.99 # Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 dhcp_range: 192.0.2.2,192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned dns-domain: opnfvlf.org # Admin network dns domain dns-search: opnfvlf.org # Admin network dns-search domain dns-upstream: # Admin network upstream dns servers - 8.8.8.8 # - 8.8.4.4 # ntp-upstream: # Admin upstream ntp servers - 0.se.pool.ntp.org # - 1.se.pool.ntp.org # nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth1 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: bond vlan: native members: - eth1 - eth2 # tenant: # Tenant network configuration enabled: true cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 vlan: 10 # VLAN tag to use for Overcloud hosts on this network mtu: 64000 # Tenant network MTU overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. segmentation_type: vxlan # Tenant network segmentation type: # vlan, vxlan, gre nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: 10 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: 10 members: - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" # external: # Can contain 1 or more external networks - public: # "public" network will be the network the installer VM attaches to enabled: true vlan: native mtu: 64000 # Public network MTU installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond members: - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) ip: 192.168.37.12 # IP to assign to Installer VM on this network cidr: 192.168.37.0/24 gateway: 192.168.37.1 floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet dns_nameservers: # External dns servers - 8.8.8.8 # - 8.8.4.4 # ntp: # External upstream NTP servers - 0.se.pool.ntp.org # - 1.se.pool.ntp.org # syslog: # External Syslog server server: 10.128.1.24 # transport: 'tcp' # nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: 10 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth1 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: 10 members: - eth1 external_overlay: # External network to be created in OpenStack by Services tenant name: Public_internet type: flat gateway: 192.168.37.1 - private_cloud: # another external network enabled: false vlan: 101 mtu: 64000 cidr: 192.168.38.0/24 gateway: 192.168.38.1 floating_ip_range: 192.168.38.200,192.168.38.220 #Range to allocate to floating IPs for the public network with Neutron usable_ip_range: 192.168.38.10,192.168.38.199 #Usable IP range on the public network, usually this is a shared subnet dns_nameservers: # External dns servers - 8.8.8.8 # - 8.8.4.4 # ntp: # External upstream NTP servers - 0.se.pool.ntp.org # - 1.se.pool.ntp.org # syslog: # External Syslog server server: 10.128.1.24 # transport: 'tcp' # nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: 101 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: 101 members: - eth1 external_overlay: # External network to be created in OpenStack by Services tenant name: private_cloud type: vlan segmentation_id: 101 gateway: 192.168.38.1 # storage: # Storage network configuration enabled: true cidr: 12.0.0.0/24 # Subnet in CIDR format vlan: 12 # VLAN tag to use for Overcloud hosts on this network mtu: 64000 # Tenant network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: bond # Physical interface type (interface or bond) vlan: 12 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - eth4 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: bond vlan: 12 members: - eth3 - eth4 # api: # API network configuration enabled: false cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format vlan: 13 # VLAN tag to use for Overcloud hosts on this network mtu: 64000 # Tenant network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: bond # Physical interface type (interface or bond) vlan: 13 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - eth4 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: bond vlan: 13 members: - eth3 - eth4 # JOID specific settings joid: # Compass specific settings compass: # Apex specific settings apex: networks: admin: introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes) # Fuel specific settings fuel: