diff options
Diffstat (limited to 'validator/src/validation_tool/doc/example/network.yaml')
| -rw-r--r-- | validator/src/validation_tool/doc/example/network.yaml | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/validator/src/validation_tool/doc/example/network.yaml b/validator/src/validation_tool/doc/example/network.yaml new file mode 100644 index 0000000..91c1be9 --- /dev/null +++ b/validator/src/validation_tool/doc/example/network.yaml @@ -0,0 +1,207 @@ +--- +# This configuration file defines Network Environment for a +# Baremetal Deployment of OPNFV. It contains default values +# for 5 following networks: +# +# - admin +# - tenant* +# - external* +# - storage* +# - api* +# *) optional networks +# +# Optional networks will be consolidated with the admin network +# if not explicitly configured. +# +# See short description of the networks in the comments below. +# +# "admin" is the short name for Control Plane Network. +# During OPNFV deployment it is used for node provisioning which will require +# PXE booting as well as running a DHCP server on this network. Be sure to +# disable any other DHCP/TFTP server on this network. +# +# "tenant" is the network used for tenant traffic. +# +# "external" is the network which should have internet or external +# connectivity. External OpenStack networks will be configured to egress this +# network. There can be multiple external networks, but only one assigned as +# "public" which OpenStack public API's will register. +# +# "storage" is the network for storage I/O. +# +# "api" is an optional network for splitting out OpenStack service API +# communication. This should be used for IPv6 deployments. + +network-config-metadata: # Meta data for the network configuration + title: LF-POD-1 Network config # + version: 0.1 # + created: Mon Dec 28 2015 # + comment: None # + +# yamllint disable rule:line-length +networks: # Network configurations + admin: # Admin configuration (pxe and jumpstart), + enabled: true + vlan: native # VLAN tag to use for Overcloud hosts on this network + installer_vm: # Network settings for the Installer VM on admin network + nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + members: + - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) + vlan: 29 # VLAN tag to use for this network on Installer VM, native means none + ip: 10.10.25.100 # IP to assign to Installer VM on this network + usable_ip_range: 10.10.25.0,10.10.25.100 # Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 + gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) + cidr: 10.10.25.0/24 # Subnet in CIDR format 192.168.1.0/24 + dhcp_range: 10.10.25.50,10.10.25.99 # DHCP range for the admin network, if empty it will be automatically provisioned + dns-domain: opnfvlf.org # Admin network dns domain + dns-search: opnfvlf.org # Admin network dns-search domain + dns-upstream: # Admin network upstream dns servers + - 8.8.8.8 # + - 8.8.4.4 # + ntp-upstream: # Admin upstream ntp servers + - 0.se.pool.ntp.org # + - 1.se.pool.ntp.org # + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: native # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth1 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: bond + vlan: native + members: + - eth1 + - eth2 + + tenant: # Tenant network configuration + enabled: true + cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 + vlan: 10 # VLAN tag to use for Overcloud hosts on this network + mtu: 64000 # Tenant network MTU + overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: VNI, VLAN-ID, etc. + + segmentation_type: vxlan # Tenant network segmentation type:vlan, vxlan, gre + + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: 10 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: 10 + members: + - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" + + external: # Can contain 1 or more external networks + - public: # "public" network will be the network the installer VM attaches to + enabled: true + vlan: native + mtu: 64000 # Public network MTU + installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) + nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + members: + - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) + ip: 192.168.37.12 # IP to assign to Installer VM on this network + cidr: 192.168.37.0/24 + gateway: 192.168.37.1 + floating_ip_range: 192.168.37.200,192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron + usable_ip_range: 192.168.37.10,192.168.37.199 # Usable IP range on the public network, usually this is a shared subnet + dns_nameservers: # External dns servers + - 8.8.8.8 # + - 8.8.4.4 # + ntp: # External upstream NTP servers + - 0.se.pool.ntp.org # + - 1.se.pool.ntp.org # + syslog: # External Syslog server + server: 10.128.1.24 # + transport: 'tcp' # + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: 10 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth1 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: 10 + members: + - eth1 + external_overlay: # External network to be created in OpenStack by Services tenant + name: Public_internet + type: flat + gateway: 192.168.37.1 + - private_cloud: # another external network + enabled: false + vlan: 101 + mtu: 64000 + cidr: 192.168.38.0/24 + gateway: 192.168.38.1 + floating_ip_range: 192.168.38.200,192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron + usable_ip_range: 192.168.38.10,192.168.38.199 # Usable IP range on the public network, usually this is a shared subnet + dns_nameservers: # External dns servers + - 8.8.8.8 # + - 8.8.4.4 # + ntp: # External upstream NTP servers + - 0.se.pool.ntp.org # + - 1.se.pool.ntp.org # + syslog: # External Syslog server + server: 10.128.1.24 # + transport: 'tcp' # + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: 101 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: 101 + members: + - eth1 + external_overlay: # External network to be created in OpenStack by Services tenant + name: private_cloud + type: vlan + segmentation_id: 101 + gateway: 192.168.38.1 + + storage: # Storage network configuration + enabled: true + cidr: 12.0.0.0/24 # Subnet in CIDR format + vlan: 12 # VLAN tag to use for Overcloud hosts on this network + mtu: 64000 # Tenant network MTU + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: bond # Physical interface type (interface or bond) + vlan: 12 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" + - eth4 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: bond + vlan: 12 + members: + - eth3 + - eth4 + + api: # API network configuration + enabled: false + cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format + vlan: 13 # VLAN tag to use for Overcloud hosts on this network + mtu: 64000 # Tenant network MTU + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: bond # Physical interface type (interface or bond) + vlan: 13 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" + - eth4 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: bond + vlan: 13 + members: + - eth3 + - eth4 +# yamllint enable rule:line-length |