From c5df8adbaf4eaa0005c372b242652cc6542df7c6 Mon Sep 17 00:00:00 2001 From: zhipengh Date: Tue, 20 Sep 2016 21:18:05 +0800 Subject: Parser Release C RC1 docs final clean up Change-Id: Ib74e8cbaaa6397e9f9f1e9eba35d7d2f8e8d5108 Signed-off-by: zhipengh --- docs/installationprocedure/index.rst | 14 +++- docs/installationprocedure/installerconfig.rst | 54 ++++++++++++- docs/parser_docs/intro/intro.rst | 4 +- docs/userguide/featureusage.rst | 102 +++++++++++++++++++++++-- docs/userguide/index.rst | 16 ++-- docs/userguide/testusage.rst | 2 +- 6 files changed, 170 insertions(+), 22 deletions(-) (limited to 'docs') diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst index 13def7e..1eb7461 100644 --- a/docs/installationprocedure/index.rst +++ b/docs/installationprocedure/index.rst @@ -6,9 +6,21 @@ ******************************************** Parser Configuration and Configuration Guide ******************************************** +Parser is an open source project and licensed under Apache 2. Parser will help +to provide a tooling mechanism, by parsing and then further translating Telecom +operators deployment descriptors into certain common templates, which could be +used in IaaS orchestration projects like OpenStack Heat(the template file is HOT, +which stands for Heat Orchestrator Template). + +This document contains configuration guide for Parser's three submodules: tosca2heat, +yang2tosca and policy2tosca. Users please refer to user guide for installation and execution +which usually happens after configuration. + + .. toctree:: :numbered: :maxdepth: 2 - feature.configuration.rst +.. include:: featureconfig.rst +.. include:: installerconfig.rst diff --git a/docs/installationprocedure/installerconfig.rst b/docs/installationprocedure/installerconfig.rst index efe6265..1f796b2 100644 --- a/docs/installationprocedure/installerconfig.rst +++ b/docs/installationprocedure/installerconfig.rst @@ -2,7 +2,7 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) -Parser configuration +Parser general configuration ===================== Parser can be configured with any installer in current OPNFV. @@ -19,10 +19,58 @@ Jumphost configuration For parser, there is not intial Jumphost configuration (network and software)needed in order to deploy any installer. -Platform components configuration ---------------------------------- + +Parser tosca2heat configuration +===================== For tosca2heat components(tosca-parser and heat-translator) in parser,there are not specific configuration of each component in installer. +Parser yang2tosca configuration +===================== +Parser yang2tosca requires the following to be installed. + +1. PYANG +-------- + +Please follow the below installation steps. + +Step 1: Clone pyang tool or download the zip file from the following link. + +.. code-block:: bash + + git clone https://github.com/mbj4668/pyang.git + +OR + +.. code-block:: bash + + wget https://github.com/mbj4668/pyang/archive/master.zip + +Step 2: Change directory to the downloaded directory and run the setup file. + +.. code-block:: bash + + cd pyang + python setup.py + +2. python-lxml +-------------- + +Please follow the below installation link. http://lxml.de/installation.html + + +Parser policy2tosca configuration +============================ +Parser - POLICY2TOSCA requires the following to be installed. + +1. cliff +-------- + +Install cliff with the following links. +:: +- `install ` +or +- `demoapp + diff --git a/docs/parser_docs/intro/intro.rst b/docs/parser_docs/intro/intro.rst index 195265e..b1fadc5 100644 --- a/docs/parser_docs/intro/intro.rst +++ b/docs/parser_docs/intro/intro.rst @@ -45,8 +45,8 @@ For Release C, Parser offers additional capabilities: into heat orchestration template correctly. Policy2Tosca module could be installed seperately after user installed OPNFV C release platform. -* Tosca2Heat enhancements which includes a set of feature addons for OpenStack tosca-parser module - which is integrated in the OPNFV C release platform. +* Tosca2Heat enhancements which includes a set of feature addons (such as substitution mapping) +for OpenStack tosca-parser module which is integrated in the OPNFV C release platform. * Additional testing support. diff --git a/docs/userguide/featureusage.rst b/docs/userguide/featureusage.rst index db2557f..c42330c 100644 --- a/docs/userguide/featureusage.rst +++ b/docs/userguide/featureusage.rst @@ -2,10 +2,10 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) -Installation +Parser tosca2heat Installation ============================ -Please follow the below installation steps to install parser. +Please follow the below installation steps to install tosca2heat submodule in parser. Step 1: Clone the parser project. @@ -50,7 +50,7 @@ Step 3: Install the tosca-parser sub project. components, and install heat-translator before installing tosca-parser, which is sure to use the OPNFV version of tosca-parser and heat-translator other than openstack's components. -Execution +Parser tosca2heat Execution =========================== Step 1: Change directory to where the tosca yaml files are present, example is @@ -75,9 +75,9 @@ Example: heat-translator --template-file=vRNC.yaml \ --template-type=tosca --output-file=vRNC_hot.yaml -Notes: heat-translator will call class of ToscaTemplate in tosca-parser firstly to validate and parse input yaml file, -then tranlate the file into hot file, if you only want to validate or check the input file -and don't want to translate, please use tosaca-parser as following: +Notes: heat-translator will call class of ToscaTemplate in tosca-parser firstly to validate and +parse input yaml file, then tranlate the file into hot file, if you only want to validate or +check the input file and don't want to translate, please use tosaca-parser as following: .. code-block:: bash @@ -89,8 +89,96 @@ Example: tosca-parser --template-file=vRNC.yaml -References +Parser tosca2heat References =========================== Refer two upstream components: https://github.com/openstack/tosca-parser/blob/master/doc/source/usage.rst https://github.com/openstack/heat-translator/blob/master/doc/source/usage.rst + + + + +Parser yang2tosca Execution +============================ + +Step 1: Change directory to where the scripts are present. + +.. code-block:: bash + + cd parser/yang2tosca + +Step 2: Copy the YANG file which needs to be converted into TOSCA to + current (parser/yang2tosca) folder. + +Step 3: Run the python script "parser.py" with the YANG file as an input option. + +.. code-block:: bash + + python parser.py -n "YANG filename" + +Example: + +.. code-block:: bash + + python parser.py -n example.yaml + +Step 4: Verify the TOSCA YAMl which file has been created with the same name + as the YANG file with a “_tosca” suffix. + +.. code-block:: bash + + cat "YANG filename_tosca.yaml" + +Example: + +.. code-block:: bash + + cat example_tosca.yaml + + + + + +Parser policy2tosca Execution +============================ + +Step 1: To see a list of commands available. + +.. code-block:: bash + + policy2tosca --help + +Step 2: To see help for an individual command, include the command name on the command line + +.. code-block:: bash + + policy2tosca help + +Step 3: To inject/remove policy types/policy definitions provide the TOSCA file as input to +policy2tosca command line. + +.. code-block:: bash + + policy2tosca [arguments] + +Example: + +.. code-block:: bash + + policy2tosca add-definition --policy_name rule2 --policy_type tosca.policies.Placement.Geolocation +--description "test description" --properties region:us-north-1,region:us-north-2,min_inst:2 --targets +VNF2,VNF4 --metadata "map of strings" --triggers "1,2,3,4" --source example.yaml + + +Step 4: Verify the TOSCA YAMl updated with the injection/removal executed. + +.. code-block:: bash + + cat "" + +Example: + +.. code-block:: bash + + cat example_tosca.yaml + diff --git a/docs/userguide/index.rst b/docs/userguide/index.rst index 9174daa..938f9c6 100644 --- a/docs/userguide/index.rst +++ b/docs/userguide/index.rst @@ -7,14 +7,14 @@ Parser User Guide ================= Parser is an open source project and licensed under Apache 2. Parser will help -to provide a tooling mechanism, by parsing Telecom operators VNF descriptors -(YANG templates) into TOSCA templates and then further translate TOSCA templates -into certain common templates, which could be used in IaaS orchestration projects -like OpenStack Heat(the template file is HOT, which stands for Heat Orchestrator -Template), this document is about simple TOSCA to HOT, and the example is a vRNC -(virtual Radio Network Controller) definition with format translated from simple -TOSCA(parser's input file format) to HOT(parser's output file format), which can -be deployed by heat directly. +to provide a tooling mechanism, by parsing and then further translating Telecom +operators deployment descriptors into certain common templates, which could be +used in IaaS orchestration projects like OpenStack Heat(the template file is HOT, +which stands for Heat Orchestrator Template). + +This document contains installation guide , execution guide as well as testing guide +for Parser's three submodules: tosca2heat, yang2tosca and policy2tosca. + Contents: diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst index 35dacae..47f37f1 100644 --- a/docs/userguide/testusage.rst +++ b/docs/userguide/testusage.rst @@ -2,7 +2,7 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) -Test use tox +Parser tosca2heat test usage =========================== 1. run tox in tosca-parser sub project -- cgit 1.2.3-korg