From 88df88a19674ccc0017836941b8ee32eaadf19fb Mon Sep 17 00:00:00 2001 From: Stuart Mackie Date: Thu, 23 Mar 2017 06:19:54 -0700 Subject: Deleted charms with wrong license. Will source them differently in future. Change-Id: I0fc99ea03c6b6ca4701e63793cb2be60e56c7588 Signed-off-by: Stuart Mackie --- .../contrib/hardening/host/templates/login.defs | 349 --------------------- 1 file changed, 349 deletions(-) delete mode 100644 charms/trusty/ceilometer/charmhelpers/contrib/hardening/host/templates/login.defs (limited to 'charms/trusty/ceilometer/charmhelpers/contrib/hardening/host/templates/login.defs') diff --git a/charms/trusty/ceilometer/charmhelpers/contrib/hardening/host/templates/login.defs b/charms/trusty/ceilometer/charmhelpers/contrib/hardening/host/templates/login.defs deleted file mode 100644 index db137d6..0000000 --- a/charms/trusty/ceilometer/charmhelpers/contrib/hardening/host/templates/login.defs +++ /dev/null @@ -1,349 +0,0 @@ -############################################################################### -# WARNING: This configuration file is maintained by Juju. Local changes may -# be overwritten. -############################################################################### -# -# /etc/login.defs - Configuration control definitions for the login package. -# -# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH. -# If unspecified, some arbitrary (and possibly incorrect) value will -# be assumed. All other items are optional - if not specified then -# the described action or option will be inhibited. -# -# Comment lines (lines beginning with "#") and blank lines are ignored. -# -# Modified for Linux. --marekm - -# REQUIRED for useradd/userdel/usermod -# Directory where mailboxes reside, _or_ name of file, relative to the -# home directory. If you _do_ define MAIL_DIR and MAIL_FILE, -# MAIL_DIR takes precedence. -# -# Essentially: -# - MAIL_DIR defines the location of users mail spool files -# (for mbox use) by appending the username to MAIL_DIR as defined -# below. -# - MAIL_FILE defines the location of the users mail spool files as the -# fully-qualified filename obtained by prepending the user home -# directory before $MAIL_FILE -# -# NOTE: This is no more used for setting up users MAIL environment variable -# which is, starting from shadow 4.0.12-1 in Debian, entirely the -# job of the pam_mail PAM modules -# See default PAM configuration files provided for -# login, su, etc. -# -# This is a temporary situation: setting these variables will soon -# move to /etc/default/useradd and the variables will then be -# no more supported -MAIL_DIR /var/mail -#MAIL_FILE .mail - -# -# Enable logging and display of /var/log/faillog login failure info. -# This option conflicts with the pam_tally PAM module. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -# WARNING: Unknown usernames may become world readable. -# See #290803 and #298773 for details about how this could become a security -# concern -LOG_UNKFAIL_ENAB no - -# -# Enable logging of successful logins -# -LOG_OK_LOGINS yes - -# -# Enable "syslog" logging of su activity - in addition to sulog file logging. -# SYSLOG_SG_ENAB does the same for newgrp and sg. -# -SYSLOG_SU_ENAB yes -SYSLOG_SG_ENAB yes - -# -# If defined, all su activity is logged to this file. -# -#SULOG_FILE /var/log/sulog - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -#TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, the command name to display when running "su -". For -# example, if this is defined as "su" then a "ps" will display the -# command is "-su". If not defined, then "ps" would display the -# name of the shell actually being run, e.g. something like "-sh". -# -SU_NAME su - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# *REQUIRED* The default PATH settings, for superuser and normal users. -# -# (they are minimal, add the rest in the shell startup files) -ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin -ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin{% if additional_user_paths %}{{ additional_user_paths }}{% endif %} - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -# In Debian /usr/bin/bsd-write or similar programs are setgid tty -# However, the default and recommended value for TTYPERM is still 0600 -# to not allow anyone to write to anyone else console or terminal - -# Users can still allow other people to write them by issuing -# the "mesg y" command. - -TTYGROUP tty -TTYPERM 0600 - -# -# Login configuration initializations: -# -# ERASECHAR Terminal ERASE character ('\010' = backspace). -# KILLCHAR Terminal KILL character ('\025' = CTRL/U). -# UMASK Default "umask" value. -# -# The ERASECHAR and KILLCHAR are used only on System V machines. -# -# UMASK is the default umask value for pam_umask and is used by -# useradd and newusers to set the mode of the new home directories. -# 022 is the "historical" value in Debian for UMASK -# 027, or even 077, could be considered better for privacy -# There is no One True Answer here : each sysadmin must make up his/her -# mind. -# -# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value -# for private user groups, i. e. the uid is the same as gid, and username is -# the same as the primary group name: for these, the user permissions will be -# used as group permissions, e. g. 022 will become 002. -# -# Prefix these values with "0" to get octal, "0x" to get hexadecimal. -# -ERASECHAR 0177 -KILLCHAR 025 -UMASK {{ umask }} - -# Enable setting of the umask group bits to be the same as owner bits (examples: `022` -> `002`, `077` -> `007`) for non-root users, if the uid is the same as gid, and username is the same as the primary group name. -# If set to yes, userdel will remove the user´s group if it contains no more members, and useradd will create by default a group with the name of the user. -USERGROUPS_ENAB yes - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS {{ pwd_max_age }} -PASS_MIN_DAYS {{ pwd_min_age }} -PASS_WARN_AGE 7 - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN {{ uid_min }} -UID_MAX 60000 -# System accounts -SYS_UID_MIN {{ sys_uid_min }} -SYS_UID_MAX {{ sys_uid_max }} - -# Min/max values for automatic gid selection in groupadd -GID_MIN {{ gid_min }} -GID_MAX 60000 -# System accounts -SYS_GID_MIN {{ sys_gid_min }} -SYS_GID_MAX {{ sys_gid_max }} - -# -# Max number of login retries if password is bad. This will most likely be -# overriden by PAM, since the default pam_unix module has it's own built -# in of 3 retries. However, this is a safe fallback in case you are using -# an authentication module that does not enforce PAM_MAXTRIES. -# -LOGIN_RETRIES {{ login_retries }} - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT {{ login_timeout }} - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -{% if chfn_restrict %} -CHFN_RESTRICT {{ chfn_restrict }} -{% endif %} - -# -# Should login be allowed if we can't cd to the home directory? -# Default in no. -# -DEFAULT_HOME {% if allow_login_without_home %} yes {% else %} no {% endif %} - -# -# If defined, this command is run when removing a user. -# It should remove any at/cron/print jobs etc. owned by -# the user to be removed (passed as the first argument). -# -#USERDEL_CMD /usr/sbin/userdel_local - -# -# Enable setting of the umask group bits to be the same as owner bits -# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is -# the same as gid, and username is the same as the primary group name. -# -# If set to yes, userdel will remove the user´s group if it contains no -# more members, and useradd will create by default a group with the name -# of the user. -# -USERGROUPS_ENAB yes - -# -# Instead of the real user shell, the program specified by this parameter -# will be launched, although its visible name (argv[0]) will be the shell's. -# The program may do whatever it wants (logging, additional authentification, -# banner, ...) before running the actual shell. -# -# FAKE_SHELL /bin/fakeshell - -# -# If defined, either full pathname of a file containing device names or -# a ":" delimited list of device names. Root logins will be allowed only -# upon these devices. -# -# This variable is used by login and su. -# -#CONSOLE /etc/consoles -#CONSOLE console:tty01:tty02:tty03:tty04 - -# -# List of groups to add to the user's supplementary group set -# when logging in on the console (as determined by the CONSOLE -# setting). Default is none. -# -# Use with caution - it is possible for users to gain permanent -# access to these groups, even when not logged in on the console. -# How to do it is left as an exercise for the reader... -# -# This variable is used by login and su. -# -#CONSOLE_GROUPS floppy:audio:cdrom - -# -# If set to "yes", new passwords will be encrypted using the MD5-based -# algorithm compatible with the one used by recent releases of FreeBSD. -# It supports passwords of unlimited length and longer salt strings. -# Set to "no" if you need to copy encrypted passwords to other systems -# which don't understand the new algorithm. Default is "no". -# -# This variable is deprecated. You should use ENCRYPT_METHOD. -# -MD5_CRYPT_ENAB no - -# -# If set to MD5 , MD5-based algorithm will be used for encrypting password -# If set to SHA256, SHA256-based algorithm will be used for encrypting password -# If set to SHA512, SHA512-based algorithm will be used for encrypting password -# If set to DES, DES-based algorithm will be used for encrypting password (default) -# Overrides the MD5_CRYPT_ENAB option -# -# Note: It is recommended to use a value consistent with -# the PAM modules configuration. -# -ENCRYPT_METHOD SHA512 - -# -# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512. -# -# Define the number of SHA rounds. -# With a lot of rounds, it is more difficult to brute forcing the password. -# But note also that it more CPU resources will be needed to authenticate -# users. -# -# If not specified, the libc will choose the default number of rounds (5000). -# The values must be inside the 1000-999999999 range. -# If only one of the MIN or MAX values is set, then this value will be used. -# If MIN > MAX, the highest value will be used. -# -# SHA_CRYPT_MIN_ROUNDS 5000 -# SHA_CRYPT_MAX_ROUNDS 5000 - -################# OBSOLETED BY PAM ############## -# # -# These options are now handled by PAM. Please # -# edit the appropriate file in /etc/pam.d/ to # -# enable the equivelants of them. -# -############### - -#MOTD_FILE -#DIALUPS_CHECK_ENAB -#LASTLOG_ENAB -#MAIL_CHECK_ENAB -#OBSCURE_CHECKS_ENAB -#PORTTIME_CHECKS_ENAB -#SU_WHEEL_ONLY -#CRACKLIB_DICTPATH -#PASS_CHANGE_TRIES -#PASS_ALWAYS_WARN -#ENVIRON_FILE -#NOLOGINS_FILE -#ISSUE_FILE -#PASS_MIN_LEN -#PASS_MAX_LEN -#ULIMIT -#ENV_HZ -#CHFN_AUTH -#CHSH_AUTH -#FAIL_DELAY - -################# OBSOLETED ####################### -# # -# These options are no more handled by shadow. # -# # -# Shadow utilities will display a warning if they # -# still appear. # -# # -################################################### - -# CLOSE_SESSIONS -# LOGIN_STRING -# NO_PASSWORD_CONSOLE -# QMAIL_DIR - - - -- cgit 1.2.3-korg