From 810bb7f5c6615a2d90d9451337e6df6a01702e5b Mon Sep 17 00:00:00 2001 From: Trinath Somanchi Date: Thu, 31 Aug 2017 23:33:08 +0530 Subject: Adding OVN4NFV initial documentation for Euphrates release. Change-Id: Iaa3bcf3c1b1b356ee3a694dcbb2f96098c8173bc Signed-off-by: Trinath Somanchi --- docs/testing/index.rst | 20 ++ docs/testing/testing-notes.rst | 620 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 640 insertions(+) create mode 100644 docs/testing/index.rst create mode 100644 docs/testing/testing-notes.rst (limited to 'docs/testing') diff --git a/docs/testing/index.rst b/docs/testing/index.rst new file mode 100644 index 0000000..b0d0585 --- /dev/null +++ b/docs/testing/index.rst @@ -0,0 +1,20 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. http://creativecommons.org/licenses/by/4.0 + +========================== +OVN4NFV Testing Notes +========================== + +:Project: OVN4NFV, https://wiki.opnfv.org/display/PROJ/Ovn4nfv + +:Editors: Vikram Dham (Huawei) +:Authors: Vikram Dham (Huawei) + Trinath Somanchi (NXP) + Prakash Ramchandran (Huawei) + +:Abstract: OVN4NFV Release Notes. + +.. toctree:: + :maxdepth: 1 + + testing-notes.rst diff --git a/docs/testing/testing-notes.rst b/docs/testing/testing-notes.rst new file mode 100644 index 0000000..d5e2bfd --- /dev/null +++ b/docs/testing/testing-notes.rst @@ -0,0 +1,620 @@ +Testing with DevStack +===================== + +This document describes how to test OpenStack with OVN using DevStack. We will +start by describing how to test on a single host. + +Single Node Test Environment +---------------------------- + +1. Create a test system. + +It's best to use a throwaway dev system for running DevStack. Your best bet is +to use either CentOS 7 or the latest Ubuntu LTS (16.04, Xenial). + +2. Create the ``stack`` user. + +:: + + $ git clone https://git.openstack.org/openstack-dev/devstack.git + $ sudo ./devstack/tools/create-stack-user.sh + +3. Switch to the ``stack`` user and clone DevStack and networking-ovn. + +:: + + $ sudo su - stack + $ git clone https://git.openstack.org/openstack-dev/devstack.git + $ git clone https://git.openstack.org/openstack/networking-ovn.git + +4. Configure DevStack to use networking-ovn. + +networking-ovn comes with a sample DevStack configuration file you can start +with. For example, you may want to set some values for the various PASSWORD +variables in that file so DevStack doesn't have to prompt you for them. Feel +free to edit it if you'd like, but it should work as-is. + +:: + + $ cd devstack + $ cp ../networking-ovn/devstack/local.conf.sample local.conf + +5. Run DevStack. + +This is going to take a while. It installs a bunch of packages, clones a bunch +of git repos, and installs everything from these git repos. + +:: + + $ ./stack.sh + +Once DevStack completes successfully, you should see output that looks +something like this:: + + This is your host IP address: 172.16.189.6 + This is your host IPv6 address: ::1 + Horizon is now available at http://172.16.189.6/dashboard + Keystone is serving at http://172.16.189.6/identity/ + The default users are: admin and demo + The password: password + 2017-03-09 15:10:54.117 | stack.sh completed in 2110 seconds. + +Environment Variables +--------------------- + +Once DevStack finishes successfully, we're ready to start interacting with +OpenStack APIs. OpenStack provides a set of command line tools for interacting +with these APIs. DevStack provides a file you can source to set up the right +environment variables to make the OpenStack command line tools work. + +:: + + $ . openrc + +If you're curious what environment variables are set, they generally start with +an OS prefix:: + + $ env | grep OS + OS_REGION_NAME=RegionOne + OS_IDENTITY_API_VERSION=2.0 + OS_PASSWORD=password + OS_AUTH_URL=http://192.168.122.8:5000/v2.0 + OS_USERNAME=demo + OS_TENANT_NAME=demo + OS_VOLUME_API_VERSION=2 + OS_CACERT=/opt/stack/data/CA/int-ca/ca-chain.pem + OS_NO_CACHE=1 + +Default Network Configuration +----------------------------- + +By default, DevStack creates networks called ``private`` and ``public``. +Run the following command to see the existing networks:: + + $ openstack network list + +--------------------------------------+---------+----------------------------------------------------------------------------+ + | ID | Name | Subnets | + +--------------------------------------+---------+----------------------------------------------------------------------------+ + | 40080dad-0064-480a-b1b0-592ae51c1471 | private | 5ff81545-7939-4ae0-8365-1658d45fa85c, da34f952-3bfc-45bb-b062-d2d973c1a751 | + | 7ec986dd-aae4-40b5-86cf-8668feeeab67 | public | 60d0c146-a29b-4cd3-bd90-3745603b1a4b, f010c309-09be-4af2-80d6-e6af9c78bae7 | + +--------------------------------------+---------+----------------------------------------------------------------------------+ + +A Neutron network is implemented as an OVN logical switch. networking-ovn +creates logical switches with a name in the format neutron-. +We can use ``ovn-nbctl`` to list the configured logical switches and see that +their names correlate with the output from ``neutron net-list``:: + + $ ovn-nbctl ls-list + 71206f5c-b0e6-49ce-b572-eb2e964b2c4e (neutron-40080dad-0064-480a-b1b0-592ae51c1471) + 8d8270e7-fd51-416f-ae85-16565200b8a4 (neutron-7ec986dd-aae4-40b5-86cf-8668feeeab67) + + $ ovn-nbctl get Logical_Switch neutron-40080dad-0064-480a-b1b0-592ae51c1471 external_ids + {"neutron:network_name"=private} + +Booting VMs +----------- + +In this section we'll go through the steps to create two VMs that have a +virtual NIC attached to the ``private`` Neutron network. + +DevStack uses libvirt as the Nova backend by default. If KVM is available, it +will be used. Otherwise, it will just run qemu emulated guests. This is +perfectly fine for our testing, as we only need these VMs to be able to send +and receive a small amount of traffic so performance is not very important. + +1. Get the Network UUID. + +Start by getting the UUID for the ``private`` network from the output of +``neutron net-list`` from earlier and save it off:: + + $ PRIVATE_NET_ID=40080dad-0064-480a-b1b0-592ae51c1471 + +2. Create an SSH keypair. + +Next create an SSH keypair in Nova. Later, when we boot a VM, we'll ask that +the public key be put in the VM so we can SSH into it. + +:: + + $ openstack keypair create demo > id_rsa_demo + $ chmod 600 id_rsa_demo + +3. Choose a flavor. + +We need minimal resources for these test VMs, so the ``m1.nano`` flavor is +sufficient. + +:: + + $ openstack flavor list + +----+-----------+-------+------+-----------+-------+-----------+ + | ID | Name | RAM | Disk | Ephemeral | VCPUs | Is Public | + +----+-----------+-------+------+-----------+-------+-----------+ + | 1 | m1.tiny | 512 | 1 | 0 | 1 | True | + | 2 | m1.small | 2048 | 20 | 0 | 1 | True | + | 3 | m1.medium | 4096 | 40 | 0 | 2 | True | + | 4 | m1.large | 8192 | 80 | 0 | 4 | True | + | 42 | m1.nano | 64 | 0 | 0 | 1 | True | + | 5 | m1.xlarge | 16384 | 160 | 0 | 8 | True | + | 84 | m1.micro | 128 | 0 | 0 | 1 | True | + | c1 | cirros256 | 256 | 0 | 0 | 1 | True | + | d1 | ds512M | 512 | 5 | 0 | 1 | True | + | d2 | ds1G | 1024 | 10 | 0 | 1 | True | + | d3 | ds2G | 2048 | 10 | 0 | 2 | True | + | d4 | ds4G | 4096 | 20 | 0 | 4 | True | + +----+-----------+-------+------+-----------+-------+-----------+ + + $ FLAVOR_ID=42 + +4. Choose an image. + +DevStack imports the CirrOS image by default, which is perfect for our testing. +It's a very small test image. + +:: + + $ openstack image list + +--------------------------------------+--------------------------+--------+ + | ID | Name | Status | + +--------------------------------------+--------------------------+--------+ + | 849a8db2-3754-4cf6-9271-491fa4ff7195 | cirros-0.3.5-x86_64-disk | active | + +--------------------------------------+--------------------------+--------+ + + $ IMAGE_ID=849a8db2-3754-4cf6-9271-491fa4ff7195 + +5. Setup a security rule so that we can access the VMs we will boot up next. + +By default, DevStack does not allow users to access VMs, to enable that, we +will need to add a rule. We will allow both ICMP and SSH. + +:: + + $ openstack security group rule create --ingress --ethertype IPv4 --dst-port 22 --protocol tcp default + $ openstack security group rule create --ingress --ethertype IPv4 --protocol ICMP default + $ openstack security group rule list + +--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+ + | ID | IP Protocol | IP Range | Port Range | Remote Security Group | Security Group | + +--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+ + ... + | ade97198-db44-429e-9b30-24693d86d9b1 | tcp | 0.0.0.0/0 | 22:22 | None | a47b14da-5607-404a-8de4-3a0f1ad3649c | + | d0861a98-f90e-4d1a-abfb-827b416bc2f6 | icmp | 0.0.0.0/0 | | None | a47b14da-5607-404a-8de4-3a0f1ad3649c | + ... + +--------------------------------------+-------------+-----------+------------+--------------------------------------+--------------------------------------+ + + $ neutron security-group-rule-create --direction ingress --ethertype IPv4 --port-range-min 22 --port-range-max 22 --protocol tcp default + $ neutron security-group-rule-create --direction ingress --ethertype IPv4 --protocol ICMP default + $ neutron security-group-rule-list + +--------------------------------------+----------------+-----------+-----------+---------------+-----------------+ + | id | security_group | direction | ethertype | protocol/port | remote | + +--------------------------------------+----------------+-----------+-----------+---------------+-----------------+ + | 8b2edbe6-790e-40ef-af54-c7b64ced8240 | default | ingress | IPv4 | 22/tcp | any | + | 5bee0179-807b-41d7-ab16-6de6ac051335 | default | ingress | IPv4 | icmp | any | + ... + +--------------------------------------+----------------+-----------+-----------+---------------+-----------------+ + +6. Boot some VMs. + +Now we will boot two VMs. We'll name them ``test1`` and ``test2``. + +:: + + $ openstack server create --nic net-id=$PRIVATE_NET_ID --flavor $FLAVOR_ID --image $IMAGE_ID --key-name demo test1 + +-----------------------------+-----------------------------------------------------------------+ + | Field | Value | + +-----------------------------+-----------------------------------------------------------------+ + | OS-DCF:diskConfig | MANUAL | + | OS-EXT-AZ:availability_zone | | + | OS-EXT-STS:power_state | NOSTATE | + | OS-EXT-STS:task_state | scheduling | + | OS-EXT-STS:vm_state | building | + | OS-SRV-USG:launched_at | None | + | OS-SRV-USG:terminated_at | None | + | accessIPv4 | | + | accessIPv6 | | + | addresses | | + | adminPass | BzAWWA6byGP6 | + | config_drive | | + | created | 2017-03-09T16:56:08Z | + | flavor | m1.nano (42) | + | hostId | | + | id | d8b8084e-58ff-44f4-b029-a57e7ef6ba61 | + | image | cirros-0.3.5-x86_64-disk (849a8db2-3754-4cf6-9271-491fa4ff7195) | + | key_name | demo | + | name | test1 | + | progress | 0 | + | project_id | b6522570f7344c06b1f24303abf3c479 | + | properties | | + | security_groups | name='default' | + | status | BUILD | + | updated | 2017-03-09T16:56:08Z | + | user_id | c68f77f1d85e43eb9e5176380a68ac1f | + | volumes_attached | | + +-----------------------------+-----------------------------------------------------------------+ + + $ openstack server create --nic net-id=$PRIVATE_NET_ID --flavor $FLAVOR_ID --image $IMAGE_ID --key-name demo test2 + +-----------------------------+-----------------------------------------------------------------+ + | Field | Value | + +-----------------------------+-----------------------------------------------------------------+ + | OS-DCF:diskConfig | MANUAL | + | OS-EXT-AZ:availability_zone | | + | OS-EXT-STS:power_state | NOSTATE | + | OS-EXT-STS:task_state | scheduling | + | OS-EXT-STS:vm_state | building | + | OS-SRV-USG:launched_at | None | + | OS-SRV-USG:terminated_at | None | + | accessIPv4 | | + | accessIPv6 | | + | addresses | | + | adminPass | YB8dmt5v88JV | + | config_drive | | + | created | 2017-03-09T16:56:50Z | + | flavor | m1.nano (42) | + | hostId | | + | id | 170d4f37-9299-4a08-b48b-2b90fce8e09b | + | image | cirros-0.3.5-x86_64-disk (849a8db2-3754-4cf6-9271-491fa4ff7195) | + | key_name | demo | + | name | test2 | + | progress | 0 | + | project_id | b6522570f7344c06b1f24303abf3c479 | + | properties | | + | security_groups | name='default' | + | status | BUILD | + | updated | 2017-03-09T16:56:51Z | + | user_id | c68f77f1d85e43eb9e5176380a68ac1f | + | volumes_attached | | + +-----------------------------+-----------------------------------------------------------------+ + +Once both VMs have been started, they will have a status of ``ACTIVE``:: + + $ openstack server list + +--------------------------------------+-------+--------+---------------------------------------------------------+--------------------------+ + | ID | Name | Status | Networks | Image Name | + +--------------------------------------+-------+--------+---------------------------------------------------------+--------------------------+ + | 170d4f37-9299-4a08-b48b-2b90fce8e09b | test2 | ACTIVE | private=fd5d:9d1b:457c:0:f816:3eff:fe24:49df, 10.0.0.3 | cirros-0.3.5-x86_64-disk | + | d8b8084e-58ff-44f4-b029-a57e7ef6ba61 | test1 | ACTIVE | private=fd5d:9d1b:457c:0:f816:3eff:fe3f:953d, 10.0.0.10 | cirros-0.3.5-x86_64-disk | + +--------------------------------------+-------+--------+---------------------------------------------------------+--------------------------+ + +Our two VMs have addresses of ``10.0.0.3`` and ``10.0.0.10``. If we list +Neutron ports, there are two new ports with these addresses associated +with them:: + + $ openstack port list + +--------------------------------------+------+-------------------+-----------------------------------------------------------------------------------------------------+--------+ + | ID | Name | MAC Address | Fixed IP Addresses | Status | + +--------------------------------------+------+-------------------+-----------------------------------------------------------------------------------------------------+--------+ + ... + | 97c970b0-485d-47ec-868d-783c2f7acde3 | | fa:16:3e:3f:95:3d | ip_address='10.0.0.10', subnet_id='da34f952-3bfc-45bb-b062-d2d973c1a751' | ACTIVE | + | | | | ip_address='fd5d:9d1b:457c:0:f816:3eff:fe3f:953d', subnet_id='5ff81545-7939-4ae0-8365-1658d45fa85c' | | + | e003044d-334a-4de3-96d9-35b2d2280454 | | fa:16:3e:24:49:df | ip_address='10.0.0.3', subnet_id='da34f952-3bfc-45bb-b062-d2d973c1a751' | ACTIVE | + | | | | ip_address='fd5d:9d1b:457c:0:f816:3eff:fe24:49df', subnet_id='5ff81545-7939-4ae0-8365-1658d45fa85c' | | + ... + +--------------------------------------+------+-------------------+-----------------------------------------------------------------------------------------------------+--------+ + + $ TEST1_PORT_ID=97c970b0-485d-47ec-868d-783c2f7acde3 + $ TEST2_PORT_ID=e003044d-334a-4de3-96d9-35b2d2280454 + +Now we can look at OVN using ``ovn-nbctl`` to see the logical switch ports +that were created for these two Neutron ports. The first part of the output +is the OVN logical switch port UUID. The second part in parentheses is the +logical switch port name. Neutron sets the logical switch port name equal to +the Neutron port ID. + +:: + + $ ovn-nbctl lsp-list neutron-$PRIVATE_NET_ID + ... + fde1744b-e03b-46b7-b181-abddcbe60bf2 (97c970b0-485d-47ec-868d-783c2f7acde3) + 7ce284a8-a48a-42f5-bf84-b2bca62cd0fe (e003044d-334a-4de3-96d9-35b2d2280454) + ... + + +These two ports correspond to the two VMs we created. + +VM Connectivity +--------------- + +We can connect to our VMs by associating a floating IP address from the public +network. + +:: + + $ openstack floating ip create --port $TEST1_PORT_ID public + +---------------------+--------------------------------------+ + | Field | Value | + +---------------------+--------------------------------------+ + | created_at | 2017-03-09T18:58:12Z | + | description | | + | fixed_ip_address | 10.0.0.10 | + | floating_ip_address | 172.24.4.8 | + | floating_network_id | 7ec986dd-aae4-40b5-86cf-8668feeeab67 | + | id | 24ff0799-5a72-4a5b-abc0-58b301c9aee5 | + | name | None | + | port_id | 97c970b0-485d-47ec-868d-783c2f7acde3 | + | project_id | b6522570f7344c06b1f24303abf3c479 | + | revision_number | 1 | + | router_id | ee51adeb-0dd8-4da0-ab6f-7ce60e00e7b0 | + | status | DOWN | + | updated_at | 2017-03-09T18:58:12Z | + +---------------------+--------------------------------------+ + +Devstack does not wire up the public network by default so we must do +that before connecting to this floating IP address. + +:: + + $ sudo ip link set br-ex up + $ sudo ip route add 172.24.4.0/24 dev br-ex + $ sudo ip addr add 172.24.4.1/24 dev br-ex + +Now you should be able to connect to the VM via its floating IP address. +First, ping the address. + +:: + + $ ping -c 1 172.24.4.8 + PING 172.24.4.8 (172.24.4.8) 56(84) bytes of data. + 64 bytes from 172.24.4.8: icmp_seq=1 ttl=63 time=0.823 ms + + --- 172.24.4.8 ping statistics --- + 1 packets transmitted, 1 received, 0% packet loss, time 0ms + rtt min/avg/max/mdev = 0.823/0.823/0.823/0.000 ms + +Now SSH to the VM:: + + $ ssh -i id_rsa_demo cirros@172.24.4.8 hostname + test1 + +Adding Another Compute Node +--------------------------- + +After completing the earlier instructions for setting up devstack, you can use +a second VM to emulate an additional compute node. This is important for OVN +testing as it exercises the tunnels created by OVN between the hypervisors. + +Just as before, create a throwaway VM but make sure that this VM has a +different host name. Having same host name for both VMs will confuse Nova and +will not produce two hypervisors when you query nova hypervisor list later. +Once the VM is setup, create the ``stack`` user:: + + $ git clone https://git.openstack.org/openstack-dev/devstack.git + $ sudo ./devstack/tools/create-stack-user.sh + +Switch to the ``stack`` user and clone DevStack and networking-ovn:: + + $ sudo su - stack + $ git clone https://git.openstack.org/openstack-dev/devstack.git + $ git clone https://git.openstack.org/openstack/networking-ovn.git + +networking-ovn comes with another sample configuration file that can be used +for this:: + + $ cd devstack + $ cp ../networking-ovn/devstack/computenode-local.conf.sample local.conf + +You must set SERVICE_HOST in local.conf. The value should be the IP address of +the main DevStack host. You must also set HOST_IP to the IP address of this +new host. See the text in the sample configuration file for more +information. Once that is complete, run DevStack:: + + $ cd devstack + $ ./stack.sh + +This should complete in less time than before, as it's only running a single +OpenStack service (nova-compute) along with OVN (ovn-controller, ovs-vswitchd, +ovsdb-server). The final output will look something like this:: + + + This is your host IP address: 172.16.189.30 + This is your host IPv6 address: ::1 + 2017-03-09 18:39:27.058 | stack.sh completed in 1149 seconds. + +Now go back to your main DevStack host. You can use admin credentials to +verify that the additional hypervisor has been added to the deployment:: + + $ cd devstack + $ . openrc admin + + $ openstack hypervisor list + +----+------------------------+-----------------+---------------+-------+ + | ID | Hypervisor Hostname | Hypervisor Type | Host IP | State | + +----+------------------------+-----------------+---------------+-------+ + | 1 | centos7-ovn-devstack | QEMU | 172.16.189.6 | up | + | 2 | centos7-ovn-devstack-2 | QEMU | 172.16.189.30 | up | + +----+------------------------+-----------------+---------------+-------+ + +You can also look at OVN and OVS to see that the second host has shown up. For +example, there will be a second entry in the Chassis table of the +OVN_Southbound database. You can use the ``ovn-sbctl`` utility to list +chassis, their configuration, and the ports bound to each of them:: + + $ ovn-sbctl show + + Chassis "ddc8991a-d838-4758-8d15-71032da9d062" + hostname: "centos7-ovn-devstack" + Encap vxlan + ip: "172.16.189.6" + options: {csum="true"} + Encap geneve + ip: "172.16.189.6" + options: {csum="true"} + Port_Binding "97c970b0-485d-47ec-868d-783c2f7acde3" + Port_Binding "e003044d-334a-4de3-96d9-35b2d2280454" + Port_Binding "cr-lrp-08d1f28d-cc39-4397-b12b-7124080899a1" + Chassis "b194d07e-0733-4405-b795-63b172b722fd" + hostname: "centos7-ovn-devstack-2.os1.phx2.redhat.com" + Encap geneve + ip: "172.16.189.30" + options: {csum="true"} + Encap vxlan + ip: "172.16.189.30" + options: {csum="true"} + +You can also see a tunnel created to the other compute node:: + + $ ovs-vsctl show + ... + Bridge br-int + fail_mode: secure + ... + Port "ovn-b194d0-0" + Interface "ovn-b194d0-0" + type: geneve + options: {csum="true", key=flow, remote_ip="172.16.189.30"} + ... + ... + +Provider Networks +----------------- + +Neutron has a "provider networks" API extension that lets you specify +some additional attributes on a network. These attributes let you +map a Neutron network to a physical network in your environment. +The OVN ML2 driver is adding support for this API extension. It currently +supports "flat" and "vlan" networks. + +Here is how you can test it: + +First you must create an OVS bridge that provides connectivity to the +provider network on every host running ovn-controller. For trivial +testing this could just be a dummy bridge. In a real environment, you +would want to add a local network interface to the bridge, as well. + +:: + + $ ovs-vsctl add-br br-provider + +ovn-controller on each host must be configured with a mapping between +a network name and the bridge that provides connectivity to that network. +In this case we'll create a mapping from the network name "providernet" +to the bridge 'br-provider". + +:: + + $ ovs-vsctl set open . \ + external-ids:ovn-bridge-mappings=providernet:br-provider + +Now create a Neutron provider network. + +:: + + $ neutron net-create provider --shared \ + --provider:physical_network providernet \ + --provider:network_type flat + +Alternatively, you can define connectivity to a VLAN instead of a flat network: + +:: + + $ neutron net-create provider-101 --shared \ + --provider:physical_network providernet \ + --provider:network_type vlan \ + --provider:segmentation_id 101 + +Observe that the OVN ML2 driver created a special logical switch port of type +localnet on the logical switch to model the connection to the physical network. + +:: + + $ ovn-nbctl show + ... + switch 5bbccbbd-f5ca-411b-bad9-01095d6f1316 (neutron-729dbbee-db84-4a3d-afc3-82c0b3701074) + port provnet-729dbbee-db84-4a3d-afc3-82c0b3701074 + addresses: ["unknown"] + ... + + $ ovn-nbctl lsp-get-type provnet-729dbbee-db84-4a3d-afc3-82c0b3701074 + localnet + + $ ovn-nbctl lsp-get-options provnet-729dbbee-db84-4a3d-afc3-82c0b3701074 + network_name=providernet + +If VLAN is used, there will be a VLAN tag shown on the localnet port as well. + +Finally, create a Neutron port on the provider network. + +:: + + $ neutron port-create provider + +or if you followed the VLAN example, it would be: + +:: + + $ neutron port-create provider-101 + +Run Unit Tests +-------------- +Run the unit tests in the local environment with ``tox``. + +:: + + $ tox -e py27 + $ tox -e py27 networking_ovn.tests.unit.test_ovn_db_sync + $ tox -e py27 networking_ovn.tests.unit.test_ovn_db_sync.TestOvnSbSyncML2 + $ tox -e py27 networking_ovn.tests.unit.test_ovn_db_sync.TestOvnSbSyncML2 + .test_ovn_sb_sync + +Run Functional Tests +-------------------- +you can run the functional tests with ``tox`` in your devstack environment: + +:: + + $ cd networking_ovn/tests/functional + $ tox -e dsvm-functional + $ tox -e dsvm-functional networking_ovn.tests.functional.test_mech_driver\ + .TestPortBinding.test_port_binding_create_port + +If you want to run functional tests in your local clean environment, you may +need a new working directory. + +:: + + $ export BASE=/opt/stack + $ mkdir -p /opt/stack/new + $ cd /opt/stack/new + +Next, get networking_ovn, neutron and devstack. + +:: + + $ git clone https://git.openstack.org/openstack/networking-ovn.git + $ git clone https://git.openstack.org/openstack/neutron.git + $ git clone https://git.openstack.org/openstack-dev/devstack.git + +Then execute the script to prepare the environment. + +:: + + $ cd networking-ovn/ + $ ./networking_ovn/tests/contrib/gate_hook.sh + +Finally, run the functional tests with ``tox`` + +:: + + $ cd networking_ovn/tests/functional + $ tox -e dsvm-functional + $ tox -e dsvm-functional networking_ovn.tests.functional.test_mech_driver\ + .TestPortBinding.test_port_binding_create_port + -- cgit 1.2.3-korg