From 3ecf7ea5fe5611fea3550fb8065f5ffe0859f17d Mon Sep 17 00:00:00 2001
From: ChristopherPrice <christopher.price@ericsson.com>
Date: Wed, 13 Jul 2016 14:43:32 +0200
Subject: Creating a template scenario installation file for Colorado.

Aside from my likely copywright infringements, please review/comment.
The basic idea is we create a "master" versions for each colorado installer then each scenario
derives from the master files to produce their own.  The template is intentionally modular for
that purpose.

Change-Id: Ic5ca72ece8eb462e6e6e7307d3cde32ea7760b23
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
---
 .../installation.rst                               | 151 +++++++++++++++++++++
 1 file changed, 151 insertions(+)
 create mode 100644 docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst

(limited to 'docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst')

diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
new file mode 100644
index 000000000..3387eacc3
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
@@ -0,0 +1,151 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+<template> software installation and deployment
+===============================================
+
+This section describes the installation of the OPNFV installation
+server (jumphost) as well as the deployment of the <template> OPNFV
+reference platform stack across a server cluster.
+
+Install jumphost
+----------------
+
+If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation
+this can be done using an ISO image with the following commands
+
+#. Mount the <template> ISO file/media as a boot device to the jump host server.
+
+#. Reboot the jump host to establish the jumphost server.
+
+   - The system now boots from the ISO image.
+
+   - Select "Fuel Install (Static IP)"
+
+   - Press [Enter].
+
+#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
+
+At this time you can continue with the installation according to the following instructions.
+
+#. In the "Fuel User" section - Confirm/change the default password
+
+   - Enter "admin" in the Fuel password input
+
+   - Enter "admin" in the Confirm password input
+
+   - Select "Check" and press [Enter]
+
+#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network.
+
+   - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
+
+#. In the "PXE Setup" section - Change the following fields to appropriate values (example below):
+
+   - DHCP Pool Start 10.20.0.3
+
+   - DHCP Pool End 10.20.0.254
+
+   - DHCP Pool Gateway  10.20.0.2 (IP address of Fuel node)
+
+#. In the "DNS & Hostname" section - Change the following fields to appropriate values:
+
+   - Hostname
+
+   - Domain
+
+   - Search Domain
+
+   - External DNS
+
+   - Hostname to test DNS
+
+   - Select <Check> and press [Enter]
+
+
+#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section, edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
+
+   - Navigate to "HTTP proxy" and enter your http proxy address
+
+   - Select <Check> and press [Enter]
+
+#. In the "Time Sync" section - Change the following fields to appropriate values:
+
+   - NTP Server 1 <Customer NTP server 1>
+
+   - NTP Server 2 <Customer NTP server 2>
+
+   - NTP Server 3 <Customer NTP server 3>
+
+#. Start the installation.
+
+   - Select Quit Setup and press Save and Quit.
+
+   - Installation starts, wait until the login screen is shown.
+
+
+Boot the Node Servers
+---------------------
+
+After the Fuel Master node has rebooted from the above steps and is at
+the login prompt, you should boot the Node Servers (Your
+Compute/Control/Storage blades (nested or real) with a PXE booting
+scheme so that the FUEL Master can pick them up for control.
+
+#. Enable PXE booting
+
+   - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
+
+#. Reboot all the control and compute blades.
+
+#. Wait for the availability of nodes showing up in the Fuel GUI.
+
+   - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
+
+   - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes.
+
+
+Install additional Plugins/Features on the FUEL node
+----------------------------------------------------
+
+#. SSH to your FUEL node (e.g. root@10.20.0.2  pwd: r00tme)
+
+#. Select wanted plugins/features from the /opt/opnfv/ directory.
+
+#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
+   Expected output: "Plugin ....... was successfully installed."
+
+Create an OpenStack Environment
+-------------------------------
+
+#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
+
+#. Create and name a new OpenStack environment, to be installed.
+
+#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
+
+#. Select "compute virtulization method".
+
+   - Select "QEMU-KVM as hypervisor" and press <Next>
+
+#. Select "network mode".
+
+   - Select "Neutron with ML2 plugin"
+
+   - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
+
+   - Press <Next>
+
+#. Select "Storage Back-ends".
+
+   - Select "Ceph for block storage" and press <Next>
+
+#. Select "additional services" you wish to install.
+
+   - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
+
+#. Create the new environment.
+
+   - Click <Create> Button
+
-- 
cgit 1.2.3-korg