Autogenerated on 2012-11-29
from - https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Installation_with_PF_RING


Installation with PF RING

This is the installation guide for Suricata with PF_RING support and a guide to
install PF_RING.
To install DKMS, enter:

  sudo apt-get install dkms

To get subversion for checking out the PF_RING code, flex and bison for
libpcap, enter:

  sudo apt-get install subversion flex bison

To install the debs needed for Suricata, enter the following:

  sudo apt-get install libpcre3-dev libpcap-dev libyaml-dev zlib1g-dev libcap-
  ng-dev libnet1-dev

In the example you will build from the GIT repository, so you will need some
extra packages:

  sudo apt-get install git-core automake autoconf libtool

To build your modules, please go to:

  cd /usr/src/

Checkout the PF_RING code:

  sudo svn --force export https://svn.ntop.org/svn/ntop/trunk/PF_RING/
  PF_RING_CURRENT_SVN

Create the DKMS build directory and copy files over for the main PF_RING module
by entering the following:

  sudo mkdir /usr/src/pf_ring-4
  sudo cp -Rf /usr/src/PF_RING_CURRENT_SVN/kernel/* /usr/src/pf_ring-4/
  cd /usr/src/pf_ring-4/

Create a file called 'dkms.conf'

  sudo nano dkms.conf

and place the following into the file:

  PACKAGE_NAME="pf_ring"
  PACKAGE_VERSION="4"
  BUILT_MODULE_NAME[0]="pf_ring"
  DEST_MODULE_LOCATION[0]="/kernel/net/pf_ring/"
  AUTOINSTALL="yes"

To close the file, do so by pressing Ctrl and X at the same time, followed by y
and enter.
Build and install the kernel -module of PF_RING:

  sudo dkms add -m pf_ring -v 4
  sudo dkms build -m pf_ring -v 4
  sudo dkms install -m pf_ring -v 4

development headers.(zie aantekeningen)

  sudo mkdir -p /opt/PF_RING/{bin,lib,include/linux,sbin}

Next, build and install the userland lib.:

  sudo cp -f /usr/src/PF_RING_CURRENT_SVN/kernel/linux/pf_ring.h /opt/PF_RING/
  include/linux/
  cd /usr/src/PF_RING_CURRENT_SVN/userland/lib
  sudo ./configure
  sudo sed -i -e 's/INSTDIR   = \${DESTDIR}\/usr\/local/INSTDIR   = \$
  {DESTDIR}\/opt\/PF_RING/' Makefile
  sudo cp -f pfring_e1000e_dna.h /opt/PF_RING/include
  sudo make
  sudo make install

Enter the following to pull down the latest version of Suricata from the git
repository and build with PF_RING support:

  cd /usr/src/PF_RING_CURRENT_SVN/userland/
  sudo git clone git://phalanx.openinfosecfoundation.org/oisf.git oisfnew
  cd oisfnew
  sudo ./autogen.sh
  sudo ./configure --enable-pfring --with-libpfring-libraries=/opt/PF_RING/lib
  --with-libpfring-includes=/opt/PF_RING/include --with-libpcap-libraries=/opt/
  PF_RING/lib --with-libpcap-includes=/opt/PF_RING/include LD_RUN_PATH="/opt/
  PF_RING/lib:/usr/lib:/usr/local/lib" --prefix=/opt/PF_RING/
  sudo make install
  sudo make
  sudo mkdir etc/suricata

To make config and log directories for a more complete getting started, see:
Basic_Setup.

  sudo mkdir /etc/suricata
  sudo cp suricata.yaml /etc/suricata/
  sudo cp classification.config /etc/suricata/
  sudo mkdir /var/log/suricata

The information about the setup options for when you initialise the module:
min_num_slots:Number of ring slots (uint)
transparent_mode:0=standard Linux, 1=direct2pfring+transparent,
2=direct2pfring+non transparent.
For 1 and 2 you need to use a PF_RING aware driver (uint) .
enable_tx_capture:Set to 1 to capture outgoing packets (uint)
enable_ip_defrag:Set to 1 to enable IP defragmentation(only rx traffic is
defragmentead) (uint)
Enter the following as super-user:

  echo "options pf_ring transparent_mode=0 min_num_slots=32768
  enable_tx_capture=0" > /etc/modprobe.d/pf_ring.conf

To check the status of PF_RING :

  sudo modprobe pf_ring
  sudo modinfo pf_ring && cat /proc/net/pf_ring/info

Start up Suricata with PF_RING support:

  sudo /opt/PF_RING/bin/suricata --pfring-int=eth0 --pfring-cluster-id=99 --
  pfring-cluster-type=cluster_flow -c /etc/suricata/suricata.yaml

If you need to uninstall PF_RING or rollback your PF_RING aware drivers to
their previous state you can do so with the following commands:

  sudo dkms remove -m pf_ring -v 4 --all


Optional

The following part is optional.

  sudo dkms remove -m e1000e-pf_ring -v 1.0.15 --all

If you issue the following command, you can see that PF_RING should now be
installed as DKMS module:

  dkms status

Now go through the steps to build a PF_RING aware driver:

  sudo mkdir /usr/src/e1000e-pf_ring-1.0.15
  sudo cp -Rf /usr/src/PF_RING_CURRENT_SVN/drivers/intel/e1000e/old/e1000e-
  1.0.15/src/* /usr/src/e1000e-pf_ring-1.0.15/

Enter the following so that DKMS can find it for driver rebuilds:

  sudo cp -f /usr/src/PF_RING_CURRENT_SVN/kernel/linux/pf_ring.h /usr/src/
  e1000e-pf_ring-1.0.15/
  cd /usr/src/e1000e-pf_ring-1.0.15/

After that, fix the path to pf_ring.h:

  sed -i -e 's/\.\.\/\.\.\/\.\.\/\.\.\/kernel\/linux\/pf\_ring\.h/pf\_ring\.h/
  ' netdev.c

Then create a file called 'dkms.conf'.

  sudo nano dkms.conf

and place the following into the file:

  PACKAGE_NAME="e1000e-pf_ring"
  PACKAGE_VERSION="1.0.15"
  BUILT_MODULE_NAME[0]="e1000e"
  DEST_MODULE_LOCATION[0]="/kernel/drivers/net/e1000e/"
  AUTOINSTALL="yes"

Build and install the module of the e1000e-pf_ring network driver:

  sudo dkms add -m e1000e-pf_ring -v 1.0.15
  sudo dkms build -m e1000e-pf_ring -v 1.0.15
  sudo dkms install -m e1000e-pf_ring -v 1.0.15

After that, build and install the PF_RING enabled libpcap:

  cd /usr/src/PF_RING_CURRENT_SVN/userland/libpcap-1.0.0-ring
  ./configure
  sed -i -e 's/\.\.\/lib\/libpfring\.a/\/opt\/PF_RING\/lib\/libpfring\.a/
  ' Makefile
  sed -i -e 's/\.\.\/lib\/libpfring\.a/\/opt\/PF_RING\/lib\/libpfring\.a/
  ' Makefile.in
  ./configure --prefix=/opt/PF_RING && make && make install

Subsequently, build and install tcpdump using the PF_RING enabled version of
libpcap:

  cd /usr/src/PF_RING_CURRENT_SVN/userland/tcpdump-4.0.0
  sudo ./configure
  sudo sed -i -e 's/\.\.\/lib\/libpfring\.a/\/opt\/PF_RING\/lib\/libpfring\.a/
  ' Makefile
  sudo sed -i -e 's/\.\.\/lib\/libpfring\.a/\/opt\/PF_RING\/lib\/libpfring\.a/
  ' Makefile.in
  sudo sed -i -e 's/-I \.\.\/libpcap-1\.0\.0-ring/-I \/opt\/PF_RING\/include/
  ' Makefile
  sudo sed -i -e 's/-I \.\.\/libpcap-1\.0\.0-ring/-I \/opt\/PF_RING\/include/
  ' Makefile.in
  sudo sed -i -e 's/-L \.\.\/libpcap-1\.0\.0-ring\/-L /\/opt\/PF_RING\/lib\//
  ' Makefile
  sed -i -e 's/-L \.\.\/libpcap-1\.0\.0-ring\/-L /\/opt\/PF_RING\/lib\//
  ' Makefile.in
  sudo ./configure LD_RUN_PATH="/opt/PF_RING/lib:/usr/lib:/usr/local/lib" --
  prefix=/opt/PF_RING/ --enable-ipv6 && make && make install