AC_INIT(suricata, 2.1dev) m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])AM_SILENT_RULES([yes]) AC_CONFIG_HEADERS([config.h]) AC_CONFIG_SRCDIR([src/suricata.c]) AC_CONFIG_MACRO_DIR(m4) AM_INIT_AUTOMAKE AC_LANG_C AC_PROG_CC_C99 AC_PROG_LIBTOOL PKG_PROG_PKG_CONFIG(0.21) # 0.21 is the CentOS 5.11 version AC_DEFUN([FAIL_MESSAGE],[ echo echo echo "**********************************************" echo " ERROR: unable to find" $1 echo " checked in the following places" for i in `echo $2`; do echo " $i" done echo "**********************************************" echo exit 1 ]) AC_DEFUN([LIBNET_FAIL_WARN],[ echo echo "*************************************************************************" echo " Warning! libnet version 1.1.x could not be found in " $1 echo " Reject keywords will not be supported." echo " If you require reject support, please install libnet 1.1.x. " echo " If libnet is not installed in a non-standard location please use the" echo " --with-libnet-includes and --with-libnet-libraries configure options" echo "*************************************************************************" echo ]) dnl Taken from https://llvm.org/svn/llvm-project/llvm/trunk/autoconf/configure.ac dnl check if we compile using clang or gcc. On some systems the gcc binary is dnl is actually clang, so do a compile test. AC_MSG_CHECKING([whether GCC or Clang is our compiler]) AC_LANG_PUSH([C]) compiler=unknown AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#if ! __clang__ #error #endif ]])], compiler=clang, [AC_COMPILE_IFELSE([AC_LANG_SOURCE([[#if ! __GNUC__ #error #endif ]])], compiler=gcc, [])]) AC_LANG_POP([C]) AC_MSG_RESULT([${compiler}]) case "$compiler" in clang) CLANG_CFLAGS="-Wextra -Werror-implicit-function-declaration" AC_MSG_CHECKING([clang __sync_bool_compare_and_swap support]) AC_TRY_COMPILE([#include ], [ unsigned int i = 0; (void)__sync_bool_compare_and_swap(&i, 1, 1);], [ AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_1], [1], [Fake GCC atomic support]) AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_2], [1], [Fake GCC atomic support]) AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4], [1], [Fake GCC atomic support]) AC_DEFINE([__GCC_HAVE_SYNC_COMPARE_AND_SWAP_8], [1], [Fake GCC atomic support]) AC_MSG_RESULT([yes]) ], [AC_MSG_RESULT([no])]) AC_SUBST(CLANG_CFLAGS) ;; gcc) dnl get gcc version AC_MSG_CHECKING([gcc version]) gccver=$($CC -dumpversion) gccvermajor=$(echo $gccver | cut -d . -f1) gccverminor=$(echo $gccver | cut -d . -f2) gccvernum=$(expr $gccvermajor "*" 100 + $gccverminor) AC_MSG_RESULT($gccver) if test "$gccvernum" -ge "400"; then dnl gcc 4.0 or later GCC_CFLAGS="-Wextra -Werror-implicit-function-declaration" # remove optimization options that break our code # VJ 2010/06/27: no-tree-pre added. It breaks ringbuffers code. GCC_CFLAGS="$GCC_CFLAGS -fno-tree-pre" else GCC_CFLAGS="-W" fi AC_SUBST(GCC_CFLAGS) ;; *) AC_MSG_WARN([unsupported/untested compiler, this may or may not work]) ;; esac # Checks for programs. AC_PROG_AWK AC_PROG_CC AC_PROG_CPP AC_PROG_INSTALL AC_PROG_LN_S AC_PROG_MAKE_SET AC_PATH_PROG(HAVE_PKG_CONFIG, pkg-config, "no") if test "$HAVE_PKG_CONFIG" = "no"; then echo echo " ERROR! pkg-config not found, go get it " echo " http://pkg-config.freedesktop.org/wiki/ " echo " or install from your distribution " echo exit 1 fi AC_PATH_PROG(HAVE_PYTHON_CONFIG, python, "no") if test "$HAVE_PYTHON_CONFIG" = "no"; then echo echo " Warning! python not found, you will not be " echo " able to install surictasc unix socket client " echo enable_python="no" else enable_python="yes" fi AM_CONDITIONAL([HAVE_PYTHON], [test "$HAVE_PYTHON_CONFIG" != "no"]) AC_PATH_PROG(HAVE_WGET, wget, "no") if test "$HAVE_WGET" = "no"; then AC_PATH_PROG(HAVE_CURL, curl, "no") if test "$HAVE_CURL" = "no"; then echo echo " Warning curl or wget not found, you won't be able to" echo " download latest ruleset with 'make install-rules'" fi fi AM_CONDITIONAL([HAVE_FETCH_COMMAND], [test "x$HAVE_WGET" != "xno" || test "x$HAVE_CURL" != "xno"]) AM_CONDITIONAL([HAVE_WGET_COMMAND], [test "x$HAVE_WGET" != "xno"]) # Checks for libraries. # Checks for header files. AC_CHECK_HEADERS([arpa/inet.h assert.h ctype.h errno.h fcntl.h inttypes.h]) AC_CHECK_HEADERS([getopt.h]) AC_CHECK_HEADERS([limits.h netdb.h netinet/in.h poll.h sched.h signal.h]) AC_CHECK_HEADERS([stdarg.h stdint.h stdio.h stdlib.h string.h sys/ioctl.h]) AC_CHECK_HEADERS([syslog.h sys/prctl.h sys/socket.h sys/stat.h sys/syscall.h]) AC_CHECK_HEADERS([sys/time.h time.h unistd.h]) AC_CHECK_HEADERS([sys/ioctl.h linux/if_ether.h linux/if_packet.h linux/filter.h]) AC_CHECK_HEADERS([linux/ethtool.h linux/sockios.h]) AC_CHECK_HEADER(glob.h,,[AC_ERROR(glob.h not found ...)]) AC_CHECK_HEADERS([sys/socket.h net/if.h sys/mman.h linux/if_arp.h], [], [], [[#ifdef HAVE_SYS_SOCKET_H #include #include #endif ]]) AC_CHECK_HEADERS([windows.h winsock2.h ws2tcpip.h w32api/wtypes.h], [], [], [[ #ifndef _X86_ #define _X86_ #endif ]]) AC_CHECK_HEADERS([w32api/winbase.h], [], [], [[ #ifndef _X86_ #define _X86_ #endif #include ]]) # Checks for typedefs, structures, and compiler characteristics. AC_C_INLINE AC_TYPE_PID_T AC_TYPE_SIZE_T AC_TYPE_INT32_T AC_TYPE_UINT16_T AC_TYPE_UINT32_T AC_TYPE_UINT64_T AC_TYPE_UINT8_T AC_HEADER_STDBOOL # Checks for library functions. AC_FUNC_MALLOC AC_FUNC_REALLOC AC_CHECK_FUNCS([gettimeofday memset strcasecmp strchr strdup strerror strncasecmp strtol strtoul memchr memrchr]) OCFLAGS=$CFLAGS CFLAGS="" AC_CHECK_FUNCS([strlcpy strlcat]) CFLAGS=$OCFLAGS # Add large file support AC_SYS_LARGEFILE #check for os AC_MSG_CHECKING([host os]) # lua pkg-config name differs per OS LUA_PC_NAME="lua5.1" LUA_LIB_NAME="lua5.1" # If no host os was detected, try with uname if test -z "$host" ; then host="`uname`" fi echo -n "installation for $host OS... " e_magic_file="/usr/share/file/magic" case "$host" in *-*-*freebsd*) LUA_PC_NAME="lua-5.1" LUA_LIB_NAME="lua-5.1" CFLAGS="${CFLAGS} -DOS_FREEBSD" CPPFLAGS="${CPPFLAGS} -I/usr/local/include -I/usr/local/include/libnet11" LDFLAGS="${LDFLAGS} -L/usr/local/lib -L/usr/local/lib/libnet11" e_magic_file="/usr/share/misc/magic" ;; *-*-openbsd*) LUA_PC_NAME="lua51" CFLAGS="${CFLAGS} -D__OpenBSD__" CPPFLAGS="${CPPFLAGS} -I/usr/local/include -I/usr/local/include/libnet-1.1" LDFLAGS="${LDFLAGS} -L/usr/local/lib -I/usr/local/lib/libnet-1.1" e_magic_file="/usr/local/share/misc/magic.mgc" ;; *darwin*|*Darwin*) LUA_PC_NAME="lua-5.1" LUA_LIB_NAME="lua-5.1" CFLAGS="${CFLAGS} -DOS_DARWIN" CPPFLAGS="${CPPFLAGS} -I/opt/local/include" LDFLAGS="${LDFLAGS} -L/opt/local/lib" ;; *-*-linux*) #for now do nothing ;; *-*-mingw32*) CFLAGS="${CFLAGS} -DOS_WIN32" LDFLAGS="${LDFLAGS} -lws2_32" WINDOWS_PATH="yes" ;; *-*-cygwin) LUA_PC_NAME="lua" LUA_LIB_NAME="lua" WINDOWS_PATH="yes" ;; *) AC_MSG_WARN([unsupported OS this may or may not work]) ;; esac AC_MSG_RESULT(ok) # disable TLS on user request AC_ARG_ENABLE(threading-tls, AS_HELP_STRING([--disable-threading-tls], [Disable TLS (thread local storage)])], [enable_tls="$enableval"],[enable_tls=yes]) AS_IF([test "x$enable_tls" = "xyes"], [ # check if our target supports thread local storage AC_MSG_CHECKING(for thread local storage __thread support) AC_TRY_COMPILE([#include ], [ static __thread int i; i = 1; i++; ], [AC_DEFINE([TLS], [1], [Thread local storage]) AC_MSG_RESULT([yes]) ], [AC_MSG_RESULT([no])]) ]) #Enable support for gcc compile time security options. There is no great way to do detection of valid cflags that I have found #AX_CFLAGS_GCC_OPTION don't seem to do a better job than the code below and are a pain because of extra m4 files etc. #These flags seem to be supported on CentOS 5+, Ubuntu 8.04+, and FedoreCore 11+ #Options are taken from https://wiki.ubuntu.com/CompilerFlags AC_ARG_ENABLE(gccprotect, AS_HELP_STRING([--enable-gccprotect], [Detect and use gcc hardening options]),,[enable_gccprotect=no]) AS_IF([test "x$enable_gccprotect" = "xyes"], [ #buffer overflow protection AC_MSG_CHECKING(for -fstack-protector) TMPCFLAGS="${CFLAGS}" CFLAGS="${CFLAGS} -fstack-protector" AC_TRY_LINK(,,SECCFLAGS="-fstack-protector" AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) CFLAGS="${TMPCFLAGS}" #compile-time best-practices errors for certain libc functions, provides checks of buffer lengths and memory regions AC_MSG_CHECKING(for -D_FORTIFY_SOURCE=2) TMPCFLAGS="${CFLAGS}" CFLAGS="${CFLAGS} -D_FORTIFY_SOURCE=2" AC_TRY_COMPILE(,,SECCFLAGS="${SECCFLAGS} -D_FORTIFY_SOURCE=2" AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) CFLAGS="${TMPCFLAGS}" #compile-time warnings about misuse of format strings AC_MSG_CHECKING(for -Wformat -Wformat-security) TMPCFLAGS="${CFLAGS}" CFLAGS="${CFLAGS} -Wformat -Wformat-security" AC_TRY_COMPILE(,,SECCFLAGS="${SECCFLAGS} -Wformat -Wformat-security" AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) CFLAGS="${TMPCFLAGS}" #provides a read-only relocation table area in the final ELF AC_MSG_CHECKING(for -z relro) TMPLDFLAGS="${LDFLAGS}" LDFLAGS="${LDFLAGS} -z relro" AC_TRY_LINK(,,SECLDFLAGS="${SECLDFLAGS} -z relro" AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) LDFLAGS="${TMPLDFLAGS}" #forces all relocations to be resolved at run-time AC_MSG_CHECKING(for -z now) TMPLDFLAGS="${LDFLAGS}" LDFLAGS="${LDFLAGS} -z now" AC_TRY_LINK(,,SECLDFLAGS="${SECLDFLAGS} -z now" AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) LDFLAGS="${TMPLDFLAGS}" AC_SUBST(SECCFLAGS) AC_SUBST(SECLDFLAGS) ]) #enable profile generation AC_ARG_ENABLE(gccprofile, AS_HELP_STRING([--enable-gccprofile], [Enable gcc profile info i.e -pg flag is set]),,[enable_gccprofile=no]) AS_IF([test "x$enable_gccprofile" = "xyes"], [ CFLAGS="${CFLAGS} -pg" ]) #enable gcc march=native gcc 4.2 or later AC_ARG_ENABLE(gccmarch_native, AS_HELP_STRING([--enable-gccmarch-native], [Enable gcc march=native gcc 4.2 and later only]),,[enable_gccmarch_native=yes]) AS_IF([test "x$enable_gccmarch_native" = "xyes"], [ OFLAGS="$CFLAGS" CFLAGS="$CFLAGS -march=native" AC_MSG_CHECKING([checking if $CC supports -march=native]) AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[#include ]])], [ AC_MSG_RESULT([yes]) OPTIMIZATION_CFLAGS="-march=native" AC_SUBST(OPTIMIZATION_CFLAGS) ], [ AC_MSG_RESULT([no]) CFLAGS="$OFLAGS" enable_gccmarch_native=no ] ) ]) # options # enable the running of unit tests AC_ARG_ENABLE(unittests, AS_HELP_STRING([--enable-unittests], [Enable compilation of the unit tests]),,[enable_unittests=no]) AS_IF([test "x$enable_unittests" = "xyes"], [ AC_DEFINE([UNITTESTS],[1],[Enable built-in unittests]) ]) AM_CONDITIONAL([BUILD_UNITTESTS], [test "x$enable_unittests" = "xyes"]) # enable workaround for old barnyard2 for unified alert output AC_ARG_ENABLE(old-barnyard2, AS_HELP_STRING([--enable-old-barnyard2], [Use workaround for old barnyard2 in unified2 output]),,[enable_old_barnyard2=no]) AS_IF([test "x$enable_old_barnyard2" = "xyes"], [ AC_DEFINE([HAVE_OLD_BARNYARD2],[1],[Use workaround for old barnyard2 in unified2 output]) ]) # enable debug output AC_ARG_ENABLE(debug, AS_HELP_STRING([--enable-debug], [Enable debug output]),,[enable_debug=no]) AS_IF([test "x$enable_debug" = "xyes"], [ AC_DEFINE([DEBUG],[1],[Enable debug output]) ]) AM_CONDITIONAL([DEBUG], [test "x$enable_debug" = "xyes"]) # enable debug validation functions & macro's output AC_ARG_ENABLE(debug-validation, AS_HELP_STRING([--enable-debug-validation], [Enable (debug) validation code output]),,[enable_debug_validation=no]) AS_IF([test "x$enable_debug_validation" = "xyes"], [ AC_DEFINE([DEBUG_VALIDATION],[1],[Enable (debug) validation code output]) ]) # profiling support AC_ARG_ENABLE(profiling, AS_HELP_STRING([--enable-profiling], [Enable performance profiling]),,[enable_profiling=no]) AS_IF([test "x$enable_profiling" = "xyes"], [ case "$host" in *-*-openbsd*) AC_MSG_ERROR([profiling is not supported on OpenBSD]) ;; *) AC_DEFINE([PROFILING],[1],[Enable performance profiling]) ;; esac ]) # profiling support, locking AC_ARG_ENABLE(profiling-locks, AS_HELP_STRING([--enable-profiling-locks], [Enable performance profiling for locks]),,[enable_profiling_locks=no]) AS_IF([test "x$enable_profiling_locks" = "xyes"], [ AC_DEFINE([PROFILING],[1],[Enable performance profiling]) AC_DEFINE([PROFILE_LOCKING],[1],[Enable performance profiling for locks]) ]) # enable support for IPFW AC_ARG_ENABLE(ipfw, AS_HELP_STRING([--enable-ipfw], [Enable FreeBSD IPFW support for inline IDP]),,[enable_ipfw=no]) AS_IF([test "x$enable_ipfw" = "xyes"], [ AC_DEFINE([IPFW],[1],[Enable FreeBSD IPFW support for inline IDP]) ]) AC_ARG_ENABLE(coccinelle, AS_HELP_STRING([--disable-coccinelle], [Disable coccinelle QA steps during make check])],[enable_coccinelle="$enableval"],[enable_coccinelle=yes]) AS_IF([test "x$enable_coccinelle" = "xyes"], [ AC_PATH_PROG(HAVE_COCCINELLE_CONFIG, spatch, "no") if test "$HAVE_COCCINELLE_CONFIG" = "no"; then echo " Warning! spatch not found, you will not be " echo " able to run code checking with coccinelle " echo " get it from http://coccinelle.lip6.fr " echo " or install from your distribution " enable_coccinelle=no fi ]) AM_CONDITIONAL([HAVE_COCCINELLE], [test "x$enable_coccinelle" != "xno"]) # disable detection AC_ARG_ENABLE(detection, AS_HELP_STRING([--disable-detection], [Disable Detection Modules])], [enable_detection="$enableval"],[enable_detection=yes]) AS_IF([test "x$enable_detection" = "xno"], [ AC_DEFINE([HAVE_DETECT_DISABLED], [1], [Detection is disabled]) ]) # Tilera PCIE logging AM_CONDITIONAL([BUILD_PCIE_LOGGING], [test ! -z "$TILERA_ROOT"]) # libraries AC_MSG_CHECKING([for Mpipe]) AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[#include ]])], [ AC_MSG_RESULT([yes]) AC_DEFINE([HAVE_MPIPE],[1],[mPIPE support is available]) LDFLAGS="$LDFLAGS -lgxpci -lgxio -ltmc" ], [AC_MSG_RESULT([no])]) #libpcre AC_ARG_WITH(libpcre_includes, [ --with-libpcre-includes=DIR libpcre include directory], [with_libpcre_includes="$withval"],[with_libpcre_includes=no]) AC_ARG_WITH(libpcre_libraries, [ --with-libpcre-libraries=DIR libpcre library directory], [with_libpcre_libraries="$withval"],[with_libpcre_libraries="no"]) if test "$with_libpcre_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libpcre_includes}" fi AC_CHECK_HEADER(pcre.h,,[AC_ERROR(pcre.h not found ...)]) if test "$with_libpcre_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libpcre_libraries}" fi PCRE="" AC_CHECK_LIB(pcre, pcre_get_substring,, PCRE="no",-lpthread) if test "$PCRE" = "no"; then echo echo " ERROR! pcre library not found, go get it" echo " from www.pcre.org." echo exit 1 fi # To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work # see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful PCRE="" TMPLIBS="${LIBS}" AC_CHECK_LIB(pcre, pcre_dfa_exec,, PCRE="no") if test "$PCRE" = "no"; then echo echo " ERROR! pcre library was found but version was < 6.0" echo " please upgrade to a newer version of pcre which you can get from" echo " www.pcre.org." echo exit 1 fi LIBS="${TMPLIBS}" AC_TRY_COMPILE([ #include ], [ int eo = 0; eo |= PCRE_EXTRA_MATCH_LIMIT_RECURSION; ], [ pcre_match_limit_recursion_available=yes ], [:] ) if test "$pcre_match_limit_recursion_available" != "yes"; then echo echo " Warning! pcre extra opt PCRE_EXTRA_MATCH_LIMIT_RECURSION not found" echo " This could lead to potential DoS please upgrade to pcre >= 6.5" echo " from www.pcre.org." echo " Continuing for now...." echo AC_DEFINE([NO_PCRE_MATCH_RLIMIT],[1],[Pcre PCRE_EXTRA_MATCH_LIMIT_RECURSION not available]) fi TMPCFLAGS="${CFLAGS}" CFLAGS="-O0 -g -Werror -Wall" AC_TRY_COMPILE([ #include ], [ pcre_extra *extra = NULL; pcre_free_study(extra); ], [ AC_DEFINE([HAVE_PCRE_FREE_STUDY], [1], [Pcre pcre_free_study supported])], [:] ) CFLAGS="${TMPCFLAGS}" #enable support for PCRE-jit available since pcre-8.20 AC_MSG_CHECKING(for PCRE JIT support) AC_TRY_COMPILE([ #include ], [ int jit = 0; pcre_config(PCRE_CONFIG_JIT, &jit); ], [ pcre_jit_available=yes ], [ pcre_jit_available=no ] ) if test "x$pcre_jit_available" = "xyes"; then AC_MSG_RESULT(yes) AC_DEFINE([PCRE_HAVE_JIT], [1], [Pcre with JIT compiler support enabled]) AC_MSG_CHECKING(for PCRE JIT support usability) AC_TRY_COMPILE([ #include ], [ const char* regexstr = "(a|b|c|d)"; pcre *re; const char *error; pcre_extra *extra; int err_offset; re = pcre_compile(regexstr,0, &error, &err_offset,NULL); extra = pcre_study(re, PCRE_STUDY_JIT_COMPILE, &error); if (extra == NULL) exit(EXIT_FAILURE); int jit = 0; int ret = pcre_fullinfo(re, extra, PCRE_INFO_JIT, &jit); if (ret != 0 || jit != 1) exit(EXIT_FAILURE); exit(EXIT_SUCCESS); ], [ pcre_jit_works=yes ], [:] ) if test "x$pcre_jit_works" != "xyes"; then AC_MSG_RESULT(no) echo echo " PCRE JIT support detection worked but testing it failed" echo " something odd is going on, please file a bug report." echo exit 1 else AC_MSG_RESULT(yes) fi else AC_MSG_RESULT(no) fi # libyaml AC_ARG_WITH(libyaml_includes, [ --with-libyaml-includes=DIR libyaml include directory], [with_libyaml_includes="$withval"],[with_libyaml_includes=no]) AC_ARG_WITH(libyaml_libraries, [ --with-libyaml-libraries=DIR libyaml library directory], [with_libyaml_libraries="$withval"],[with_libyaml_libraries="no"]) if test "$with_libyaml_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libyaml_includes}" fi AC_CHECK_HEADER(yaml.h,,LIBYAML="no") if test "$with_libyaml_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libyaml_libraries}" fi LIBYAML="" AC_CHECK_LIB(yaml,yaml_parser_initialize,,LIBYAML="no") if test "$LIBYAML" = "no"; then echo echo " ERROR! libyaml library not found, go get it" echo " from http://pyyaml.org/wiki/LibYAML " echo " or your distribution:" echo echo " Ubuntu: apt-get install libyaml-dev" echo " Fedora: yum install libyaml-devel" echo exit 1 fi # libpthread AC_ARG_WITH(libpthread_includes, [ --with-libpthread-includes=DIR libpthread include directory], [with_libpthread_includes="$withval"],[with_libpthread_includes=no]) AC_ARG_WITH(libpthread_libraries, [ --with-libpthread-libraries=DIR libpthread library directory], [with_libpthread_libraries="$withval"],[with_libpthread_libraries="no"]) if test "$with_libpthread_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libpthread_includes}" fi dnl AC_CHECK_HEADER(pthread.h,,[AC_ERROR(pthread.h not found ...)]) if test "$with_libpthread_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libpthread_libraries}" fi PTHREAD="" AC_CHECK_LIB(pthread, pthread_create,, PTHREAD="no") if test "$PTHREAD" = "no"; then echo echo " ERROR! libpthread library not found, glibc problem?" echo exit 1 fi # libjansson enable_jansson="no" AC_ARG_WITH(libjansson_includes, [ --with-libjansson-includes=DIR libjansson include directory], [with_libjansson_includes="$withval"],[with_libjansson_includes=no]) AC_ARG_WITH(libjansson_libraries, [ --with-libjansson-libraries=DIR libjansson library directory], [with_libjansson_libraries="$withval"],[with_libjansson_libraries="no"]) if test "$with_libjansson_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libjansson_includes}" fi enable_jansson="no" enable_unixsocket="no" AC_ARG_ENABLE(unix-socket, AS_HELP_STRING([--enable-unix-socket], [Enable unix socket [default=test]]),[enable_unixsocket="$enableval"],[enable_unixsocket=test]) AC_CHECK_HEADER(jansson.h,JANSSON="yes",JANSSON="no") if test "$JANSSON" = "yes"; then if test "$with_libjansson_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libjansson_libraries}" fi AC_CHECK_LIB(jansson, json_dump_callback,, JANSSON="no") enable_jansson="yes" if test "$JANSSON" = "no"; then echo echo " Jansson >= 2.2 is required for features like unix socket" echo " Go get it from your distribution or from:" echo " http://www.digip.org/jansson/" echo if test "x$enable_unixsocket" = "xyes"; then exit 1 fi enable_unixsocket="no" enable_jansson="no" else case $host in *-*-mingw32*) ;; *-*-cygwin) ;; *) if test "x$enable_unixsocket" = "xtest"; then enable_unixsocket="yes" fi ;; esac fi else if test "x$enable_unixsocket" = "xyes"; then echo echo " Jansson >= 2.2 is required for features like unix socket" echo " Go get it from your distribution or from:" echo " http://www.digip.org/jansson/" echo exit 1 fi enable_unixsocket="no" fi AS_IF([test "x$enable_unixsocket" = "xyes"], [AC_DEFINE([BUILD_UNIX_SOCKET], [1], [Unix socket support enabled])]) AC_ARG_ENABLE(nflog, AS_HELP_STRING([--enable-nflog],[Enable libnetfilter_log support]), [ enable_nflog="yes"], [ enable_nflog="no"]) AC_ARG_ENABLE(nfqueue, AS_HELP_STRING([--enable-nfqueue], [Enable NFQUEUE support for inline IDP]),[enable_nfqueue=yes],[enable_nfqueue=no]) if test "x$enable_nflog" = "xyes" || test "x$enable_nfqueue" = "xyes"; then # libnfnetlink case $host in *-*-mingw32*) ;; *) AC_ARG_WITH(libnfnetlink_includes, [ --with-libnfnetlink-includes=DIR libnfnetlink include directory], [with_libnfnetlink_includes="$withval"],[with_libnfnetlink_includes=no]) AC_ARG_WITH(libnfnetlink_libraries, [ --with-libnfnetlink-libraries=DIR libnfnetlink library directory], [with_libnfnetlink_libraries="$withval"],[with_libnfnetlink_libraries="no"]) if test "$with_libnfnetlink_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libnfnetlink_includes}" fi if test "$with_libnfnetlink_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libnfnetlink_libraries}" fi NFNL="" AC_CHECK_LIB(nfnetlink, nfnl_fd,, NFNL="no") if test "$NFNL" = "no"; then echo echo " ERROR! nfnetlink library not found, go get it" echo " from www.netfilter.org." echo " we automatically append libnetfilter_queue/ when searching" echo " for headers etc. when the --with-libnfnetlink-includes directive" echo " is used" echo fi ;; esac fi # enable support for NFQUEUE AS_IF([test "x$enable_nfqueue" = "xyes"], [ AC_DEFINE_UNQUOTED([NFQ],[1],[Enable Linux Netfilter NFQUEUE support for inline IDP]) #libnetfilter_queue AC_ARG_WITH(libnetfilter_queue_includes, [ --with-libnetfilter_queue-includes=DIR libnetfilter_queue include directory], [with_libnetfilter_queue_includes="$withval"],[with_libnetfilter_queue_includes=no]) AC_ARG_WITH(libnetfilter_queue_libraries, [ --with-libnetfilter_queue-libraries=DIR libnetfilter_queue library directory], [with_libnetfilter_queue_libraries="$withval"],[with_libnetfilter_queue_libraries="no"]) if test "$with_libnetfilter_queue_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libnetfilter_queue_includes}" fi AC_CHECK_HEADER(libnetfilter_queue/libnetfilter_queue.h,,[AC_ERROR(libnetfilter_queue/libnetfilter_queue.h not found ...)]) if test "$with_libnetfilter_queue_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libnetfilter_queue_libraries}" fi #LDFLAGS="${LDFLAGS} -lnetfilter_queue" NFQ="" case $host in *-*-mingw32*) AC_CHECK_LIB(netfilter_queue, nfq_open,, NFQ="no",-lws2_32) AC_ARG_WITH(netfilterforwin_includes, [ --with-netfilterforwin-includes=DIR netfilterforwin include directory], [with_netfilterforwin_includes="$withval"],[with_netfilterforwin_includes=no]) if test "$with_netfilterforwin_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_netfilterforwin_includes}" else CPPFLAGS="${CPPFLAGS} -I../../netfilterforwin" fi ;; *) AC_CHECK_LIB(netfilter_queue, nfq_open,, NFQ="no",) AC_CHECK_LIB([netfilter_queue], [nfq_set_queue_maxlen],AC_DEFINE_UNQUOTED([HAVE_NFQ_MAXLEN],[1],[Found queue max length support in netfilter_queue]) ,,[-lnfnetlink]) AC_CHECK_LIB([netfilter_queue], [nfq_set_verdict2],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_VERDICT2],[1],[Found nfq_set_verdict2 function in netfilter_queue]) ,,[-lnfnetlink]) AC_CHECK_LIB([netfilter_queue], [nfq_set_queue_flags],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_QUEUE_FLAGS],[1],[Found nfq_set_queue_flags function in netfilter_queue]) ,,[-lnfnetlink]) AC_CHECK_LIB([netfilter_queue], [nfq_set_verdict_batch],AC_DEFINE_UNQUOTED([HAVE_NFQ_SET_VERDICT_BATCH],[1],[Found nfq_set_verdict_batch function in netfilter_queue]) ,,[-lnfnetlink]) # check if the argument to nfq_get_payload is signed or unsigned AC_MSG_CHECKING([for signed nfq_get_payload payload argument]) STORECFLAGS="${CFLAGS}" if test `basename $CC` = "clang"; then CFLAGS="${CFLAGS} -Werror=incompatible-pointer-types" else CFLAGS="${CFLAGS} -Werror" fi AC_COMPILE_IFELSE( [AC_LANG_PROGRAM( [ #include #include ], [ char *pktdata; nfq_get_payload(NULL, &pktdata); ])], [libnetfilter_queue_nfq_get_payload_signed="yes"], [libnetfilter_queue_nfq_get_payload_signed="no"]) AC_MSG_RESULT($libnetfilter_queue_nfq_get_payload_signed) if test "x$libnetfilter_queue_nfq_get_payload_signed" = "xyes"; then AC_DEFINE([NFQ_GET_PAYLOAD_SIGNED], [1], [For signed version of nfq_get_payload]) fi CFLAGS="${STORECFLAGS}" ;; esac if test "$NFQ" = "no"; then echo echo " ERROR! libnetfilter_queue library not found, go get it" echo " from www.netfilter.org." echo " we automatically append libnetfilter_queue/ when searching" echo " for headers etc. when the --with-libnfq-includes directive" echo " is used" echo exit 1 fi ]) # libnetfilter_log AC_ARG_WITH(libnetfilter_log_includes, [ --with-libnetfilter_log-includes=DIR libnetfilter_log include directory], [with_libnetfilter_log_includes="$withval"],[with_libnetfilter_log_includes="no"]) AC_ARG_WITH(libnetfilter_log_libraries, [ --with-libnetfilter_log-libraries=DIR libnetfilter_log library directory], [with_libnetfilter_log_libraries="$withval"],[with_libnetfilter_log_libraries="no"]) if test "$enable_nflog" = "yes"; then if test "$with_libnetfilter_log_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libnetfilter_log_includes}" fi AC_CHECK_HEADER(libnetfilter_log/libnetfilter_log.h,,[AC_ERROR(libnetfilter_log.h not found ...)]) if test "$with_libnetfilter_log_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libnetfilter_log_libraries}" fi NFLOG="" AC_CHECK_LIB(netfilter_log, nflog_open,, NFLOG="no") if test "$NFLOG" = "no"; then echo echo " ERROR! libnetfilter_log library not found, go get it" echo " from http://www.netfilter.org." echo exit 1 else AC_DEFINE([HAVE_NFLOG],[1],[nflog available]) enable_nflog="yes" fi fi # prelude AC_ARG_ENABLE(prelude, AS_HELP_STRING([--enable-prelude], [Enable Prelude support for alerts]),,[enable_prelude=no]) # Prelude doesn't work with -Werror STORECFLAGS="${CFLAGS}" CFLAGS="${CFLAGS} -Wno-error=unused-result" AS_IF([test "x$enable_prelude" = "xyes"], [ AM_PATH_LIBPRELUDE(0.9.9, , AC_MSG_ERROR(Cannot find libprelude: Is libprelude-config in the path?), no) if test "x${LIBPRELUDE_CFLAGS}" != "x"; then CPPFLAGS="${CPPFLAGS} ${LIBPRELUDE_CFLAGS}" fi if test "x${LIBPRELUDE_LDFLAGS}" != "x"; then LDFLAGS="${LDFLAGS} ${LIBPRELUDE_LDFLAGS}" fi if test "x${LIBPRELUDE_LIBS}" != "x"; then LDFLAGS="${LDFLAGS} ${LIBPRELUDE_LIBS}" fi AC_DEFINE([PRELUDE], [1], [Libprelude support enabled]) ]) CFLAGS="${STORECFLAGS}" # libnet AC_ARG_WITH(libnet_includes, [ --with-libnet-includes=DIR libnet include directory], [with_libnet_includes="$withval"],[with_libnet_includes="no"]) AC_ARG_WITH(libnet_libraries, [ --with-libnet-libraries=DIR libnet library directory], [with_libnet_libraries="$withval"],[with_libnet_libraries="no"]) if test "x$with_libnet_includes" != "xno"; then CPPFLAGS="${CPPFLAGS} -I${with_libnet_includes}" libnet_dir="${with_libnet_includes}" else libnet_dir="/usr/include /usr/local/include /usr/local/include/libnet11 /opt/local/include /usr/local/include/libnet-1.1" fi if test "x$with_libnet_libraries" != "xno"; then LDFLAGS="${LDFLAGS} -L${with_libnet_libraries}" fi LIBNET_DETECT_FAIL="no" LIBNET_INC_DIR="" for i in $libnet_dir; do if test -r "$i/libnet.h"; then LIBNET_INC_DIR="$i" fi done AC_MSG_CHECKING(for libnet.h version 1.1.x) if test "$LIBNET_INC_DIR" != ""; then if eval "grep LIBNET_VERSION $LIBNET_INC_DIR/libnet.h | grep -v '1.[[12]]' >/dev/null"; then AC_MSG_RESULT(no) LIBNET_DETECT_FAIL="yes" LIBNET_FAIL_WARN($libnet_dir) else AC_MSG_RESULT(yes) fi #CentOS, Fedora, Ubuntu-LTS, Ubuntu all set defines to the same values. libnet-config seems #to have been depreciated but all distro's seem to include it as part of the package. if test "$LIBNET_DETECT_FAIL" = "no"; then LLIBNET="" AC_CHECK_LIB(net, libnet_write,, LLIBNET="no") if test "$LLIBNET" != "no"; then AC_DEFINE([HAVE_LIBNET11],[1],(libnet 1.1 available)) AC_DEFINE([_DEFAULT_SOURCE],[1],(default source)) AC_DEFINE([_BSD_SOURCE],[1],(bsd source)) AC_DEFINE([__BSD_SOURCE],[1],(bsd source)) AC_DEFINE([__FAVOR_BSD],[1],(favor bsd)) AC_DEFINE([HAVE_NET_ETHERNET_H],[1],(ethernet.h)) else #if we displayed a warning already no reason to do it again. if test "$LIBNET_DETECT_FAIL" = "no"; then LIBNET_DETECT_FAIL="yes" LIBNET_FAIL_WARN($libnet_dir) fi fi # see if we have the patched libnet 1.1 # http://www.inliniac.net/blog/2007/10/16/libnet-11-ipv6-fixes-and-additions.html # # To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work # see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful if test "$LIBNET_DETECT_FAIL" = "no"; then LLIBNET="" TMPLIBS="${LIBS}" AC_CHECK_LIB(net, libnet_build_icmpv6_unreach,, LLIBNET="no") if test "$LLIBNET" != "no"; then AC_DEFINE([HAVE_LIBNET_ICMPV6_UNREACH],[1],(libnet_build_icmpv6_unreach available)) fi LIBS="${TMPLIBS}" fi fi else LIBNET_DETECT_FAIL="yes" LIBNET_FAIL_WARN($libnet_dir) fi # libpcap AC_ARG_WITH(libpcap_includes, [ --with-libpcap-includes=DIR libpcap include directory], [with_libpcap_includes="$withval"],[with_libpcap_includes=no]) AC_ARG_WITH(libpcap_libraries, [ --with-libpcap-libraries=DIR libpcap library directory], [with_libpcap_libraries="$withval"],[with_libpcap_libraries="no"]) if test "$with_libpcap_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libpcap_includes}" fi AC_CHECK_HEADER(pcap.h,,[AC_ERROR(pcap.h not found ...)]) if test "$with_libpcap_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libpcap_libraries}" fi AC_CHECK_HEADERS([pcap.h pcap/pcap.h pcap/bpf.h]) LIBPCAP="" AC_CHECK_LIB(pcap, pcap_open_live,, LIBPCAP="no", [-lpthread]) if test "$LIBPCAP" = "no"; then echo echo " ERROR! libpcap library not found, go get it" echo " from http://www.tcpdump.org or your distribution:" echo echo " Ubuntu: apt-get install libpcap-dev" echo " Fedora: yum install libpcap-devel" echo exit 1 fi # pcap_activate and pcap_create only exists in libpcap >= 1.0 LIBPCAPVTEST="" #To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work #see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful TMPLIBS="${LIBS}" AC_CHECK_LIB(pcap, pcap_activate,, LPCAPVTEST="no") if test "$LPCAPVTEST" != "no"; then AC_PATH_PROG(HAVE_PCAP_CONFIG, pcap-config, "no") if test "$HAVE_PCAP_CONFIG" = "no" -o "$cross_compiling" = "yes"; then AC_DEFINE([LIBPCAP_VERSION_MAJOR],[1],(libpcap version 1.0+)) else PCAP_CFLAGS="$(pcap-config --defines) $(pcap-config --cflags)" AC_SUBST(PCAP_CFLAGS) AC_DEFINE([LIBPCAP_VERSION_MAJOR],[1],(libpcap version 1.0+)) fi else AC_DEFINE([LIBPCAP_VERSION_MAJOR],[0],(libpcap version 0.x)) fi LIBS="${TMPLIBS}" #Appears as if pcap_set_buffer_size is linux only? LIBPCAPSBUFF="" #To prevent duping the lib link we reset LIBS after this check. Setting action-if-found to NULL doesn't seem to work #see: http://blog.flameeyes.eu/2008/04/29/i-consider-ac_check_lib-harmful TMPLIBS="${LIBS}" AC_CHECK_LIB(pcap, pcap_set_buffer_size,, LPCAPSBUFF="no") if test "$LPCAPSBUFF" != "no"; then AC_DEFINE([HAVE_PCAP_SET_BUFF],[1],(libpcap has pcap_set_buffer_size function)) fi LIBS="${TMPLIBS}" # libpfring # libpfring (currently only supported for libpcap enabled pfring) # Error on the side of caution. If libpfring enabled pcap is being used and we don't link against -lpfring compilation will fail. AC_ARG_ENABLE(pfring, AS_HELP_STRING([--enable-pfring], [Enable Native PF_RING support]),,[enable_pfring=no]) AS_IF([test "x$enable_pfring" = "xyes"], [ AC_DEFINE([HAVE_PFRING],[1],(PF_RING support enabled)) #We have to set CFLAGS for AC_TRY_COMPILE as it doesn't pay attention to CPPFLAGS AC_ARG_WITH(libpfring_includes, [ --with-libpfring-includes=DIR libpfring include directory], [with_libpfring_includes="$withval"],[with_libpfring_includes=no]) AC_ARG_WITH(libpfring_libraries, [ --with-libpfring-libraries=DIR libpfring library directory], [with_libpfring_libraries="$withval"],[with_libpfring_libraries="no"]) if test "$with_libpfring_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libpfring_includes}" fi if test "$with_libpfring_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libpfring_libraries}" fi LIBPFRING="" AC_CHECK_LIB(pfring, pfring_open,, LIBPFRING="no", [-lpcap]) if test "$LIBPFRING" != "no"; then STORECFLAGS="${CFLAGS}" CFLAGS="${CFLAGS} -Werror" AC_COMPILE_IFELSE( [AC_LANG_PROGRAM( [ #include ], [ pfring_recv_chunk(NULL, NULL, 0, 0); ])], [pfring_recv_chunk="yes"], [pfring_recv_chunk="no"]) CFLAGS="${STORECFLAGS}" if test "x$pfring_recv_chunk" != "xyes"; then if test "x$enable_pfring" = "xyes"; then echo echo " ERROR! --enable-pfring was passed but the library version is < 6, go get it" echo " from http://www.ntop.org/products/pf_ring/" echo exit 1 fi else LIBS="${LIBS} -lrt -lnuma" fi else if test "x$enable_pfring" = "xyes"; then echo echo " ERROR! --enable-pfring was passed but the library was not found, go get it" echo " from http://www.ntop.org/products/pf_ring/" echo exit 1 fi fi ]) # AF_PACKET support AC_ARG_ENABLE(af-packet, AS_HELP_STRING([--enable-af-packet], [Enable AF_PACKET support [default=yes]]), ,[enable_af_packet=yes]) AS_IF([test "x$enable_af_packet" = "xyes"], [ AC_CHECK_DECL([TPACKET_V2], AC_DEFINE([HAVE_AF_PACKET],[1],[AF_PACKET support is available]), [enable_af_packet="no"], [[#include #include ]]) AC_CHECK_DECL([PACKET_FANOUT_QM], AC_DEFINE([HAVE_PACKET_FANOUT],[1],[Recent packet fanout support is available]), [], [[#include ]]) ]) # Netmap support AC_ARG_ENABLE(netmap, AS_HELP_STRING([--enable-netmap], [Enable Netmap support]),,[enable_netmap=no]) AC_ARG_WITH(netmap_includes, [ --with-netmap-includes=DIR netmap include directory], [with_netmap_includes="$withval"],[with_netmap_includes=no]) AS_IF([test "x$enable_netmap" = "xyes"], [ AC_DEFINE([HAVE_NETMAP],[1],(NETMAP support enabled)) if test "$with_netmap_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_netmap_includes}" fi AC_CHECK_HEADER(net/netmap_user.h,,[AC_ERROR(net/netmap_user.h not found ...)],) ]) # libhtp AC_ARG_ENABLE(non-bundled-htp, AS_HELP_STRING([--enable-non-bundled-htp], [Enable the use of an already installed version of htp]),,[enable_non_bundled_htp=no]) AS_IF([test "x$enable_non_bundled_htp" = "xyes"], [ PKG_CHECK_MODULES([libhtp], htp,, [with_pkgconfig_htp=no]) if test "$with_pkgconfig_htp" != "no"; then CPPFLAGS="${CPPFLAGS} ${libhtp_CFLAGS}" LIBS="${LIBS} ${libhtp_LIBS}" fi AC_ARG_WITH(libhtp_includes, [ --with-libhtp-includes=DIR libhtp include directory], [with_libhtp_includes="$withval"],[with_libhtp_includes=no]) AC_ARG_WITH(libhtp_libraries, [ --with-libhtp-libraries=DIR libhtp library directory], [with_libhtp_libraries="$withval"],[with_libhtp_libraries="no"]) if test "$with_libhtp_includes" != "no"; then CPPFLAGS="-I${with_libhtp_includes} ${CPPFLAGS}" fi if test "$with_libhtp_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libhtp_libraries}" fi AC_CHECK_HEADER(htp/htp.h,,[AC_ERROR(htp/htp.h not found ...)]) LIBHTP="" AC_CHECK_LIB(htp, htp_conn_create,, LIBHTP="no") if test "$LIBHTP" = "no"; then echo echo " ERROR! libhtp library not found" echo exit 1 fi PKG_CHECK_MODULES(LIBHTPMINVERSION, [htp >= 0.5.5],[libhtp_minver_found="yes"],[libhtp_minver_found="no"]) if test "$libhtp_minver_found" = "no"; then PKG_CHECK_MODULES(LIBHTPDEVVERSION, [htp = 0.5.X],[libhtp_devver_found="yes"],[libhtp_devver_found="no"]) if test "$libhtp_devver_found" = "no"; then echo echo " ERROR! libhtp was found but it is neither >= 0.5.5, nor the dev 0.5.X" echo exit 1 fi fi AC_CHECK_LIB([htp], [htp_config_register_request_uri_normalize],AC_DEFINE_UNQUOTED([HAVE_HTP_URI_NORMALIZE_HOOK],[1],[Found htp_config_register_request_uri_normalize function in libhtp]) ,,[-lhtp]) # check for htp_tx_get_response_headers_raw AC_CHECK_LIB([htp], [htp_tx_get_response_headers_raw],AC_DEFINE_UNQUOTED([HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW],[1],[Found htp_tx_get_response_headers_raw in libhtp]) ,,[-lhtp]) AC_CHECK_LIB([htp], [htp_decode_query_inplace],AC_DEFINE_UNQUOTED([HAVE_HTP_DECODE_QUERY_INPLACE],[1],[Found htp_decode_query_inplace function in libhtp]) ,,[-lhtp]) AC_EGREP_HEADER(htp_config_set_path_decode_u_encoding, htp/htp.h, AC_DEFINE_UNQUOTED([HAVE_HTP_SET_PATH_DECODE_U_ENCODING],[1],[Found usable htp_config_set_path_decode_u_encoding function in libhtp]) ) ]) if test "x$enable_non_bundled_htp" = "xno"; then # test if we have a bundled htp if test -d "$srcdir/libhtp"; then AC_CONFIG_SUBDIRS([libhtp]) HTP_DIR="libhtp" AC_SUBST(HTP_DIR) HTP_LDADD="../libhtp/htp/libhtp.la" AC_SUBST(HTP_LDADD) # make sure libhtp is added to the includes CPPFLAGS="-I${srcdir}/../libhtp/ ${CPPFLAGS}" AC_CHECK_HEADER(iconv.h,,[AC_ERROR(iconv.h not found ...)]) AC_CHECK_LIB(iconv, libiconv_close) AC_DEFINE_UNQUOTED([HAVE_HTP_URI_NORMALIZE_HOOK],[1],[Assuming htp_config_register_request_uri_normalize function in bundled libhtp]) AC_DEFINE_UNQUOTED([HAVE_HTP_TX_GET_RESPONSE_HEADERS_RAW],[1],[Assuming htp_tx_get_response_headers_raw function in bundled libhtp]) AC_DEFINE_UNQUOTED([HAVE_HTP_DECODE_QUERY_INPLACE],[1],[Assuming htp_decode_query_inplace function in bundled libhtp]) else echo echo " ERROR: Libhtp is not bundled. Get libhtp by doing:" echo " git clone https://github.com/ironbee/libhtp" echo " Then re-run Suricata's autogen.sh and configure script." echo " Or, if libhtp is installed in a different location," echo " pass --enable-non-bundled-htp to Suricata's configure script." echo " Add --with-libhtp-includes= and --with-libhtp-libraries= if" echo " libhtp is not installed in the include and library paths." echo exit 1 fi fi # enable CUDA output AC_ARG_ENABLE(cuda, AS_HELP_STRING([--enable-cuda], [Enable experimental CUDA pattern matching]),,[enable_cuda=no]) AS_IF([test "x$enable_cuda" = "xyes"], [ AC_ARG_WITH(cuda_includes, [ --with-cuda-includes=DIR cuda include directory], [with_cuda_includes="$withval"],[with_cuda_includes=no]) AC_ARG_WITH(cuda_libraries, [ --with-cuda-libraries=DIR cuda library directory], [with_cuda_libraries="$withval"],[with_cuda_libraries="no"]) AC_ARG_WITH(cuda_nvcc, [ --with-cuda-nvcc=DIR cuda nvcc compiler directory], [with_cuda_nvcc="$withval"],[with_cuda_nvcc=no]) AC_DEFINE([SC_CUDA_SUPPORT__],[1],(CUDA support enabled)) if test "$with_cuda_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_cuda_includes}" else CPPFLAGS="${CPPFLAGS} -I/usr/local/cuda/include" fi if test "$with_cuda_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_cuda_libraries}" fi if test "$with_cuda_nvcc" != "no"; then NVCC_DIR="${with_cuda_nvcc}" else NVCC_DIR="/usr/local/cuda/bin" fi AC_CHECK_HEADER(cuda.h,,[AC_ERROR(cuda.h not found ...)]) LIBCUDA="" AC_CHECK_LIB(cuda, cuArray3DCreate,, LIBCUDA="no") if test "$LIBCUDA" = "no"; then echo echo " ERROR! libcuda library not found" echo exit 1 fi AC_PATH_PROG([NVCC], [nvcc], no, [$PATH:$NVCC_DIR]) if test "x$NVCC" = "xno"; then echo echo " ERROR! CUDA nvcc compiler not found: use --with-cuda-nvcc=DIR" echo exit 1 fi AC_MSG_CHECKING(for nvcc version) NVCCVER=`$NVCC --version | grep "release" | sed 's/.*release \(@<:@0-9@:>@\)\.\(@<:@0-9@:>@\).*/\1\2/'` AC_MSG_RESULT($NVCCVER) if test "$NVCCVER" -lt 31; then echo echo " Warning! Your CUDA nvcc version might be outdated." echo " If compilation fails try the latest CUDA toolkit from" echo " www.nvidia.com/object/cuda_develop.html" echo fi AM_PATH_PYTHON(,, no) if test "x$PYTHON" = "xno"; then echo echo " ERROR! Compiling CUDA kernels requires python." echo exit 1 fi ]) AM_CONDITIONAL([BUILD_CUDA], [test "x$enable_cuda" = "xyes"]) # Check for libcap-ng case $host in *-*-linux*) AC_ARG_WITH(libcap_ng_includes, [ --with-libcap_ng-includes=DIR libcap_ng include directory], [with_libcap_ng_includes="$withval"],[with_libcap_ng_includes=no]) AC_ARG_WITH(libcap_ng_libraries, [ --with-libcap_ng-libraries=DIR libcap_ng library directory], [with_libcap_ng_libraries="$withval"],[with_libcap_ng_libraries="no"]) if test "$with_libcap_ng_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libcap_ng_includes}" fi if test "$with_libcap_ng_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libcap_ng_libraries}" fi AC_CHECK_HEADER(cap-ng.h,,LIBCAP_NG="no") if test "$LIBCAP_NG" != "no"; then LIBCAP_NG="" AC_CHECK_LIB(cap-ng,capng_clear,,LIBCAP_NG="no") fi if test "$LIBCAP_NG" != "no"; then AC_DEFINE([HAVE_LIBCAP_NG],[1],[Libpcap-ng support]) fi if test "$LIBCAP_NG" = "no"; then echo echo " WARNING! libcap-ng library not found, go get it" echo " from http://people.redhat.com/sgrubb/libcap-ng/" echo " or your distribution:" echo echo " Ubuntu: apt-get install libcap-ng-dev" echo " Fedora: yum install libcap-ng-devel" echo echo " Suricata will be built without support for dropping privs." echo fi ;; esac # Check for DAG support. AC_ARG_ENABLE(dag, AS_HELP_STRING([--enable-dag],[Enable DAG capture]), [ enable_dag=yes ], [ enable_dag=no]) AC_ARG_WITH(dag_includes, [ --with-dag-includes=DIR dagapi include directory], [with_dag_includes="$withval"],[with_dag_includes="no"]) AC_ARG_WITH(dag_libraries, [ --with-dag-libraries=DIR dagapi library directory], [with_dag_libraries="$withval"],[with_dag_libraries="no"]) if test "$enable_dag" = "yes"; then if test "$with_dag_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_dag_includes}" fi if test "$with_dag_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_dag_libraries}" fi AC_CHECK_HEADER(dagapi.h,DAG="yes",DAG="no") if test "$DAG" != "no"; then DAG="" AC_CHECK_LIB(dag,dag_open,,DAG="no",) fi if test "$DAG" = "no"; then echo echo " ERROR! libdag library not found" echo exit 1 fi AC_DEFINE([HAVE_DAG],[1],(Endace DAG card support enabled)) fi # libnspr enable_nspr="no" # Try pkg-config first: PKG_CHECK_MODULES([libnspr], nspr,, [with_pkgconfig_nspr=no]) if test "$with_pkgconfig_nspr" != "no"; then CPPFLAGS="${CPPFLAGS} ${libnspr_CFLAGS}" LIBS="${LIBS} ${libnspr_LIBS}" fi AC_ARG_WITH(libnspr_includes, [ --with-libnspr-includes=DIR libnspr include directory], [with_libnspr_includes="$withval"],[with_libnspr_includes=no]) AC_ARG_WITH(libnspr_libraries, [ --with-libnspr-libraries=DIR libnspr library directory], [with_libnspr_libraries="$withval"],[with_libnspr_libraries="no"]) if test "$with_libnspr_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libnspr_includes}" fi AC_CHECK_HEADER(nspr.h,NSPR="yes",NSPR="no") if test "$NSPR" = "yes"; then if test "$with_libnspr_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libnspr_libraries}" fi AC_CHECK_LIB(nspr4, PR_GetCurrentThread,, NSPR="no") if test "$NSPR" = "no"; then echo echo " ERROR! libnspr library not found, go get it" echo " from Mozilla or your distribution:" echo echo " Ubuntu: apt-get install libnspr4-dev" echo " Fedora: yum install nspr-devel" echo exit 1 fi enable_nspr="yes" fi # libnss enable_nss="no" # Try pkg-config first: PKG_CHECK_MODULES([libnss], nss,, [with_pkgconfig_nss=no]) if test "$with_pkgconfig_nss" != "no"; then CPPFLAGS="${CPPFLAGS} ${libnss_CFLAGS}" LIBS="${LIBS} ${libnss_LIBS}" fi AC_ARG_WITH(libnss_includes, [ --with-libnss-includes=DIR libnss include directory], [with_libnss_includes="$withval"],[with_libnss_includes=no]) AC_ARG_WITH(libnss_libraries, [ --with-libnss-libraries=DIR libnss library directory], [with_libnss_libraries="$withval"],[with_libnss_libraries="no"]) if test "$with_libnss_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libnss_includes}" fi AC_CHECK_HEADER(sechash.h,NSS="yes",NSS="no") if test "$NSS" = "yes"; then if test "$with_libnss_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libnss_libraries}" fi AC_CHECK_LIB(nss3, HASH_Begin,, NSS="no") if test "$NSS" = "no"; then echo echo " ERROR! libnss library not found, go get it" echo " from Mozilla or your distribution:" echo echo " Ubuntu: apt-get install libnss3-dev" echo " Fedora: yum install nss-devel" echo exit 1 fi AC_DEFINE([HAVE_NSS],[1],[libnss available for md5]) enable_nss="yes" fi # libmagic AC_ARG_WITH(libmagic_includes, [ --with-libmagic-includes=DIR libmagic include directory], [with_libmagic_includes="$withval"],[with_libmagic_includes=no]) AC_ARG_WITH(libmagic_libraries, [ --with-libmagic-libraries=DIR libmagic library directory], [with_libmagic_libraries="$withval"],[with_libmagic_libraries="no"]) if test "$with_libmagic_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libmagic_includes}" fi AC_CHECK_HEADER(magic.h,,[AC_ERROR(magic.h not found ...)]) if test "$with_libmagic_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libmagic_libraries}" fi MAGIC="" AC_CHECK_LIB(magic, magic_open,, MAGIC="no") if test "$MAGIC" = "no"; then echo echo " ERROR! magic library not found, go get it" echo " from http://www.darwinsys.com/file/ or your distribution:" echo echo " Ubuntu: apt-get install libmagic-dev" echo " Fedora: yum install file-devel" echo exit 1 fi # Napatech - Using the 3GD API AC_ARG_ENABLE(napatech, AS_HELP_STRING([--enable-napatech],[Enabled Napatech Devices]), [ enable_napatech=yes ], [ enable_napatech=no]) AC_ARG_WITH(napatech_includes, [ --with-napatech-includes=DIR napatech include directory], [with_napatech_includes="$withval"],[with_napatech_includes="/opt/napatech3/include"]) AC_ARG_WITH(napatech_libraries, [ --with-napatech-libraries=DIR napatech library directory], [with_napatech_libraries="$withval"],[with_napatech_libraries="/opt/napatech3/lib"]) if test "$enable_napatech" = "yes"; then CPPFLAGS="${CPPFLAGS} -I${with_napatech_includes}" LDFLAGS="${LDFLAGS} -L${with_napatech_libraries} -lntapi" AC_CHECK_HEADER(nt.h,NAPATECH="yes",NAPATECH="no") if test "$NAPATECH" != "no"; then NAPATECH="" AC_CHECK_LIB(ntapi, NT_Init,NAPATECH="yes",NAPATECH="no") fi if test "$NAPATECH" = "no"; then echo echo " ERROR! libntapi library not found" echo exit 1 fi AC_DEFINE([HAVE_NAPATECH],[1],(Napatech capture card support)) fi # liblua AC_ARG_ENABLE(lua, AS_HELP_STRING([--enable-lua],[Enable Lua support]), [ enable_lua="yes"], [ enable_lua="no"]) AC_ARG_ENABLE(luajit, AS_HELP_STRING([--enable-luajit],[Enable Luajit support]), [ enable_luajit="yes"], [ enable_luajit="no"]) if test "$enable_lua" = "yes"; then if test "$enable_luajit" = "yes"; then echo "ERROR: can't enable liblua and luajit at the same time." echo "For LuaJIT, just use --enable-luajit. For liblua (no jit)" echo "support, use just --enable-lua." echo "Both options will enable the Lua scripting capabilities" echo "in Suricata". echo exit 1 fi fi AC_ARG_WITH(liblua_includes, [ --with-liblua-includes=DIR liblua include directory], [with_liblua_includes="$withval"],[with_liblua_includes="no"]) AC_ARG_WITH(liblua_libraries, [ --with-liblua-libraries=DIR liblua library directory], [with_liblua_libraries="$withval"],[with_liblua_libraries="no"]) if test "$enable_lua" = "yes"; then if test "$with_liblua_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_liblua_includes}" else # lua lua51 lua5.1 lua-5.1 PKG_CHECK_MODULES([LUA], [lua], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua5.1], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua-5.1], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua51], [LUA="yes"], [ LUA="no" ]) ]) ]) ]) CPPFLAGS="${CPPFLAGS} ${LUA_CFLAGS}" fi AC_CHECK_HEADER(lualib.h,LUA="yes",LUA="no") if test "$LUA" = "yes"; then if test "$with_liblua_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_liblua_libraries}" AC_CHECK_LIB(${LUA_LIB_NAME}, luaL_openlibs,, LUA="no") if test "$LUA" = "no"; then echo echo " ERROR! liblua library not found, go get it" echo " from http://lua.org/index.html or your distribution:" echo echo " Ubuntu: apt-get install liblua-5.1-dev" echo " CentOS/Fedora: yum install lua-devel" echo echo " If you installed software in a non-standard prefix" echo " consider adjusting the PKG_CONFIG_PATH environment variable" echo " or use --with-liblua-libraries configure option." echo exit 1 fi else # lua lua51 lua5.1 lua-5.1 PKG_CHECK_MODULES([LUA], [lua], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua5.1], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua-5.1], [LUA="yes"], [ PKG_CHECK_MODULES([LUA], [lua51], [LUA="yes"], [ LUA="no" ]) ]) ]) ]) LDFLAGS="${LDFLAGS} ${LUA_LIBS}" fi AC_DEFINE([HAVE_LUA],[1],[liblua available]) enable_lua="yes" else echo echo " ERROR! liblua headers not found, go get them" echo " from http://lua.org/index.html or your distribution:" echo echo " Ubuntu: apt-get install liblua-5.1-dev" echo " CentOS/Fedora: yum install lua-devel" echo echo " If you installed software in a non-standard prefix" echo " consider adjusting the PKG_CONFIG_PATH environment variable" echo " or use --with-liblua-includes and --with-liblua-libraries" echo " configure option." echo exit 1 fi fi # libluajit AC_ARG_WITH(libluajit_includes, [ --with-libluajit-includes=DIR libluajit include directory], [with_libluajit_includes="$withval"],[with_libluajit_includes="no"]) AC_ARG_WITH(libluajit_libraries, [ --with-libluajit-libraries=DIR libluajit library directory], [with_libluajit_libraries="$withval"],[with_libluajit_libraries="no"]) if test "$enable_luajit" = "yes"; then if test "$with_libluajit_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libluajit_includes}" else PKG_CHECK_MODULES([LUAJIT], [luajit], , LUAJIT="no") CPPFLAGS="${CPPFLAGS} ${LUAJIT_CFLAGS}" fi AC_CHECK_HEADER(lualib.h,LUAJIT="yes",LUAJIT="no") if test "$LUAJIT" = "yes"; then if test "$with_libluajit_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libluajit_libraries}" else PKG_CHECK_MODULES([LUAJIT], [luajit]) LDFLAGS="${LDFLAGS} ${LUAJIT_LIBS}" fi AC_CHECK_LIB(luajit-5.1, luaL_openlibs,, LUAJIT="no") if test "$LUAJIT" = "no"; then echo echo " ERROR! libluajit library not found, go get it" echo " from http://luajit.org/index.html or your distribution:" echo echo " Ubuntu: apt-get install libluajit-5.1-dev" echo echo " If you installed software in a non-standard prefix" echo " consider adjusting the PKG_CONFIG_PATH environment variable" echo " or use --with-libluajit-libraries configure option." echo exit 1 fi AC_DEFINE([HAVE_LUA],[1],[lua support available]) AC_DEFINE([HAVE_LUAJIT],[1],[libluajit available]) enable_lua="yes, through luajit" enable_luajit="yes" else echo echo " ERROR! libluajit headers not found, go get them" echo " from http://luajit.org/index.html or your distribution:" echo echo " Ubuntu: apt-get install libluajit-5.1-dev" echo echo " If you installed software in a non-standard prefix" echo " consider adjusting the PKG_CONFIG_PATH environment variable" echo " or use --with-libluajit-includes and --with-libluajit-libraries" echo " configure option." echo exit 1 fi fi # libgeoip AC_ARG_ENABLE(geoip, AS_HELP_STRING([--enable-geoip],[Enable GeoIP support]), [ enable_geoip="yes"], [ enable_geoip="no"]) AC_ARG_WITH(libgeoip_includes, [ --with-libgeoip-includes=DIR libgeoip include directory], [with_libgeoip_includes="$withval"],[with_libgeoip_includes="no"]) AC_ARG_WITH(libgeoip_libraries, [ --with-libgeoip-libraries=DIR libgeoip library directory], [with_libgeoip_libraries="$withval"],[with_libgeoip_libraries="no"]) if test "$enable_geoip" = "yes"; then if test "$with_libgeoip_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libgeoip_includes}" fi AC_CHECK_HEADER(GeoIP.h,GEOIP="yes",GEOIP="no") if test "$GEOIP" = "yes"; then if test "$with_libgeoip_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libgeoip_libraries}" fi AC_CHECK_LIB(GeoIP, GeoIP_country_code_by_ipnum,, GEOIP="no") fi if test "$GEOIP" = "no"; then echo echo " ERROR! libgeoip library not found, go get it" echo " from http://www.maxmind.com/en/geolite or your distribution:" echo echo " Ubuntu: apt-get install libgeoip-dev" echo " Fedora: yum install GeoIP-devel" echo exit 1 fi AC_DEFINE([HAVE_GEOIP],[1],[libgeoip available]) enable_geoip="yes" fi # Position Independent Executable AC_ARG_ENABLE(pie, AS_HELP_STRING([--enable-pie],[Enable compiling as a position independent executable]), [ enable_pie="yes"], [ enable_pie="no"]) if test "$enable_pie" = "yes"; then CPPFLAGS="${CPPFLAGS} -fPIC" LDFLAGS="${LDFLAGS} -pie" fi # libhiredis AC_ARG_ENABLE(hiredis, AS_HELP_STRING([--enable-hiredis],[Enable Redis support]), [ enable_hiredis="yes"], [ enable_hiredis="no"]) AC_ARG_WITH(libhiredis_includes, [ --with-libhiredis-includes=DIR libhiredis include directory], [with_libhiredis_includes="$withval"],[with_libhiredis_includes="no"]) AC_ARG_WITH(libhiredis_libraries, [ --with-libhiredis-libraries=DIR libhiredis library directory], [with_libhiredis_libraries="$withval"],[with_libhiredis_libraries="no"]) if test "$enable_hiredis" = "yes"; then if test "$with_libhiredis_includes" != "no"; then CPPFLAGS="${CPPFLAGS} -I${with_libhiredis_includes}" fi AC_CHECK_HEADER("hiredis/hiredis.h",HIREDIS="yes",HIREDIS="no") if test "$HIREDIS" = "yes"; then if test "$with_libhiredis_libraries" != "no"; then LDFLAGS="${LDFLAGS} -L${with_libhiredis_libraries}" fi AC_CHECK_LIB(hiredis, redisConnect,, HIREDIS="no") fi if test "$HIREDIS" = "no"; then echo echo " ERROR! libhiredis library not found, go get it" echo " from https://github.com/redis/hiredis or your distribution:" echo echo " Ubuntu: apt-get install libhiredis-dev" echo " Fedora: yum install libhiredis-devel" echo exit 1 fi if test "$HIREDIS" = "yes"; then AC_DEFINE([HAVE_LIBHIREDIS],[1],[libhiredis available]) enable_hiredis="yes" fi fi # get cache line size AC_PATH_PROG(HAVE_GETCONF_CMD, getconf, "no") if test "$HAVE_GETCONF_CMD" != "no"; then CLS=$(getconf LEVEL1_DCACHE_LINESIZE) if [test "$CLS" != "" && test "$CLS" != "0"]; then AC_DEFINE_UNQUOTED([CLS],[${CLS}],[L1 cache line size]) else AC_DEFINE([CLS],[64],[L1 cache line size]) fi else AC_DEFINE([CLS],[64],[L1 cache line size]) fi # get revision if test -f ./revision; then REVISION=`cat ./revision` AC_DEFINE_UNQUOTED([REVISION],[${REVISION}],[Git revision]) else AC_PATH_PROG(HAVE_GIT_CMD, git, "no") if test "$HAVE_GIT_CMD" != "no"; then if [ test -d .git ]; then REVISION=`git rev-parse --short HEAD` AC_DEFINE_UNQUOTED([REVISION],[${REVISION}],[Git revision]) fi fi fi AC_SUBST(CFLAGS) AC_SUBST(LDFLAGS) AC_SUBST(CPPFLAGS) define([EXPAND_VARIABLE], [$2=[$]$1 if test $prefix = 'NONE'; then prefix="/usr/local" fi while true; do case "[$]$2" in *\[$]* ) eval "$2=[$]$2" ;; *) break ;; esac done eval "$2=[$]$2$3" ])dnl EXPAND_VARIABLE # suricata log dir if test "$WINDOWS_PATH" = "yes"; then systemtype="`systeminfo | grep \"based PC\"`" case "$systemtype" in *x64*) e_winbase="C:\\\\Program Files (x86)\\\\Suricata" ;; *) e_winbase="C:\\\\Program Files\\\\Suricata" ;; esac e_sysconfdir="$e_winbase\\\\" e_sysconfrulesdir="$e_winbase\\\\rules\\\\" e_magic_file="$e_winbase\\\\magic.mgc" e_logdir="$e_winbase\\\\log" e_logfilesdir="$e_logdir\\\\files" e_logcertsdir="$e_logdir\\\\certs" else EXPAND_VARIABLE(localstatedir, e_logdir, "/log/suricata/") EXPAND_VARIABLE(localstatedir, e_rundir, "/run/") EXPAND_VARIABLE(localstatedir, e_logfilesdir, "/log/suricata/files") EXPAND_VARIABLE(localstatedir, e_logcertsdir, "/log/suricata/certs") EXPAND_VARIABLE(sysconfdir, e_sysconfdir, "/suricata/") EXPAND_VARIABLE(sysconfdir, e_sysconfrulesdir, "/suricata/rules") EXPAND_VARIABLE(localstatedir, e_localstatedir, "/run/suricata") fi AC_SUBST(e_logdir) AC_SUBST(e_rundir) AC_SUBST(e_logfilesdir) AC_SUBST(e_logcertsdir) AC_SUBST(e_sysconfdir) AC_SUBST(e_sysconfrulesdir) AC_SUBST(e_localstatedir) AC_DEFINE_UNQUOTED([CONFIG_DIR],["$e_sysconfdir"],[Our CONFIG_DIR]) AC_SUBST(e_magic_file) EXPAND_VARIABLE(prefix, CONFIGURE_PREFIX) EXPAND_VARIABLE(sysconfdir, CONFIGURE_SYSCONDIR) EXPAND_VARIABLE(localstatedir, CONFIGURE_LOCALSTATEDIR) AC_SUBST(CONFIGURE_PREFIX) AC_SUBST(CONFIGURE_SYSCONDIR) AC_SUBST(CONFIGURE_LOCALSTATEDIR) AC_OUTPUT(Makefile src/Makefile qa/Makefile qa/coccinelle/Makefile rules/Makefile doc/Makefile contrib/Makefile contrib/file_processor/Makefile contrib/file_processor/Action/Makefile contrib/file_processor/Processor/Makefile contrib/tile_pcie_logd/Makefile suricata.yaml scripts/Makefile scripts/suricatasc/Makefile scripts/suricatasc/suricatasc) SURICATA_BUILD_CONF="Suricata Configuration: AF_PACKET support: ${enable_af_packet} PF_RING support: ${enable_pfring} NFQueue support: ${enable_nfqueue} NFLOG support: ${enable_nflog} IPFW support: ${enable_ipfw} Netmap support: ${enable_netmap} DAG enabled: ${enable_dag} Napatech enabled: ${enable_napatech} Unix socket enabled: ${enable_unixsocket} Detection enabled: ${enable_detection} libnss support: ${enable_nss} libnspr support: ${enable_nspr} libjansson support: ${enable_jansson} hiredis support: ${enable_hiredis} Prelude support: ${enable_prelude} PCRE jit: ${pcre_jit_available} LUA support: ${enable_lua} libluajit: ${enable_luajit} libgeoip: ${enable_geoip} Non-bundled htp: ${enable_non_bundled_htp} Old barnyard2 support: ${enable_old_barnyard2} CUDA enabled: ${enable_cuda} Suricatasc install: ${enable_python} Unit tests enabled: ${enable_unittests} Debug output enabled: ${enable_debug} Debug validation enabled: ${enable_debug_validation} Profiling enabled: ${enable_profiling} Profiling locks enabled: ${enable_profiling_locks} Coccinelle / spatch: ${enable_coccinelle} Generic build parameters: Installation prefix: ${prefix} Configuration directory: ${e_sysconfdir} Log directory: ${e_logdir} --prefix ${CONFIGURE_PREFIX} --sysconfdir ${CONFIGURE_SYSCONDIR} --localstatedir ${CONFIGURE_LOCALSTATEDIR} Host: ${host} Compiler: ${CC} (exec name) / ${compiler} (real) GCC Protect enabled: ${enable_gccprotect} GCC march native enabled: ${enable_gccmarch_native} GCC Profile enabled: ${enable_gccprofile} Position Independent Executable enabled: ${enable_pie} CFLAGS ${CFLAGS} PCAP_CFLAGS ${PCAP_CFLAGS} SECCFLAGS ${SECCFLAGS}" echo echo "$SURICATA_BUILD_CONF" echo "printf(" >src/build-info.h echo "$SURICATA_BUILD_CONF" | sed -e 's/^/"/' | sed -e 's/$/\\n"/' >>src/build-info.h echo ");" >>src/build-info.h echo " To build and install run 'make' and 'make install'. You can run 'make install-conf' if you want to install initial configuration files to ${e_sysconfdir}. Running 'make install-full' will install configuration and rules and provide you a ready-to-run suricata." echo echo "To install Suricata into /usr/bin/suricata, have the config in /etc/suricata and use /var/log/suricata as log dir, use: ./configure --prefix=/usr/ --sysconfdir=/etc/ --localstatedir=/var/" echo