.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. SPDX-License-Identifier: CC-BY-4.0 .. (c) Cisco Systems, Inc =========================================== NFVbench Installation and Quick Start Guide =========================================== .. _docker_installation: Make sure you satisfy the `hardware and software requirements ` before you start . 1. Container installation ------------------------- To pull the latest NFVbench container image: .. code-block:: bash docker pull opnfv/nfvbench 2. Docker Container configuration --------------------------------- The NFVbench container requires the following Docker options to operate properly. +-------------------------------------------------------+-------------------------------------------------------+ | Docker options | Description | +=======================================================+=======================================================+ | -v /lib/modules/$(uname -r):/lib/modules/$(uname -r) | needed by kernel modules in the container | +-------------------------------------------------------+-------------------------------------------------------+ | -v /usr/src/kernels:/usr/src/kernels | needed by TRex to build kernel modules when needed | +-------------------------------------------------------+-------------------------------------------------------+ | -v /dev:/dev | needed by kernel modules in the container | +-------------------------------------------------------+-------------------------------------------------------+ | -v $PWD:/tmp/nfvbench | optional but recommended to pass files between the | | | host and the docker space (see examples below) | | | Here we map the current directory on the host to the | | | /tmp/nfvbench director in the container but any | | | other similar mapping can work as well | +-------------------------------------------------------+-------------------------------------------------------+ | --net=host | (optional) needed if you run the NFVbench | | | server in the container (or use any appropriate | | | docker network mode other than "host") | +-------------------------------------------------------+-------------------------------------------------------+ | --privileged | (optional) required if SELinux is enabled on the host | +-------------------------------------------------------+-------------------------------------------------------+ | -e HOST="127.0.0.1" | (optional) required if REST server is enabled | +-------------------------------------------------------+-------------------------------------------------------+ | -e PORT=7556 | (optional) required if REST server is enabled | +-------------------------------------------------------+-------------------------------------------------------+ | -e CONFIG_FILE="/root/nfvbenchconfig.json | (optional) required if REST server is enabled | +-------------------------------------------------------+-------------------------------------------------------+ It can be convenient to write a shell script (or an alias) to automatically insert the necessary options. The minimal configuration file required must specify the PCI addresses of the 2 NIC ports to use. If OpenStack is used, the openrc_file property must be defined to point to a valid OpenStack rc file. Here is an example of mimimal configuration using OpenStack where: - the openrc file is located on the host current directory which is mapped under /tmp/nfvbench in the container (this is achieved using -v $PWD:/tmp/nfvbench) - the 2 NIC ports to use for generating traffic have the PCI addresses "04:00.0" and "04:00.1" .. code-block:: bash { "openrc_file": "/tmp/nfvbench/openrc", "traffic_generator": { "generator_profile": [ { "interfaces": [ { "pci": "04:00.0", "port": 0, }, { "pci": "04:00.1", "port": 1, } ], "intf_speed": "", "ip": "127.0.0.1", "name": "trex-local", "software_mode": false, "tool": "TRex" } ] } } The other options in the minimal configuration must be present and must have the same values as above. 3. Start the Docker container ----------------------------- As for any Docker container, you can execute NFVbench measurement sessions using a temporary container ("docker run" - which exits after each NFVbench run) or you can decide to run the NFVbench container in the background then execute one or more NFVbench measurement sessions on that container ("docker exec"). The former approach is simpler to manage (since each container is started and terminated after each command) but incurs a small delay at start time (several seconds). The second approach is more responsive as the delay is only incurred once when starting the container. We will take the second approach and start the NFVbench container in detached mode with the name "nfvbench" (this works with bash, prefix with "sudo" if you do not use the root login) First create a new working directory, and change the current working directory to there. A "nfvbench_ws" directory under your home directory is good place for that, and this is where the OpenStack RC file and NFVbench config file will sit. To run NFVBench without server mode .. code-block:: bash cd ~/nfvbench_ws docker run --detach --net=host --privileged -v $PWD:/tmp/nfvbench -v /dev:/dev -v /lib/modules/$(uname -r):/lib/modules/$(uname -r) -v /usr/src/kernels:/usr/src/kernels --name nfvbench opnfv/nfvbench To run NFVBench enabling REST server (mount the configuration json and the path for openrc) .. code-block:: bash cd ~/nfvbench_ws docker run --detach --net=host --privileged -e HOST="127.0.0.1" -e PORT=7556 -e CONFIG_FILE="/tmp/nfvbench/nfvbenchconfig.json -v $PWD:/tmp/nfvbench -v /dev:/dev -v /lib/modules/$(uname -r):/lib/modules/$(uname -r) -v /usr/src/kernels:/usr/src/kernels --name nfvbench opnfv/nfvbench start_rest_server The create an alias to make it easy to execute nfvbench commands directly from the host shell prompt: .. code-block:: bash alias nfvbench='docker exec -it nfvbench nfvbench' The next to last "nfvbench" refers to the name of the container while the last "nfvbench" refers to the NFVbench binary that is available to run in the container. To verify it is working: .. code-block:: bash nfvbench --version nfvbench --help 4. NFVbench configuration ------------------------- Create a new file containing the minimal configuration for NFVbench, we can call it any name, for example "my_nfvbench.cfg" and paste the following yaml template in the file: .. code-block:: bash openrc_file: traffic_generator: generator_profile: - name: trex-local tool: TRex ip: 127.0.0.1 cores: 3 software_mode: false, interfaces: - port: 0 pci: - port: 1 pci: intf_speed: If OpenStack is used, NFVbench requires an ``openrc`` file to connect to OpenStack using the OpenStack API. This file can be downloaded from the OpenStack Horizon dashboard (refer to the OpenStack documentation on how to retrieve the openrc file). The file pathname in the container must be stored in the "openrc_file" property. If it is stored on the host in the current directory, its full pathname must start with /tmp/nfvbench (since the current directory is mapped to /tmp/nfvbench in the container). If OpenStack is not used, remove the openrc_file property. The PCI address of the 2 physical interfaces that will be used by the traffic generator must be configured. The PCI address can be obtained for example by using the "lspci" Linux command. For example: .. code-block:: bash [root@sjc04-pod6-build ~]# lspci | grep 710 0a:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) 0a:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) 0a:00.2 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) 0a:00.3 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) Example of edited configuration with an OpenStack RC file stored in the current directory with the "openrc" name, and PCI addresses "0a:00.0" and "0a:00.1" (first 2 ports of the quad port NIC): .. code-block:: bash openrc_file: /tmp/nfvbench/openrc traffic_generator: generator_profile: - name: trex-local tool: TRex ip: 127.0.0.1 cores: 3 software_mode: false, interfaces: - port: 0 switch_port: pci: "0a:00.0" - port: 1 switch_port: pci: "0a:00.1" intf_speed: .. warning:: You have to put quotes around the pci addresses as shown in the above example, otherwise TRex will read it wrong. Alternatively, the full template with comments can be obtained using the --show-default-config option in yaml format: .. code-block:: bash nfvbench --show-default-config > my_nfvbench.cfg Edit the nfvbench.cfg file to only keep those properties that need to be modified (preserving the nesting). Make sure you have your nfvbench configuration file (my_nfvbench.cfg) and - if OpenStack is used - OpenStack RC file in your pre-created working directory. 5. Run NFVbench --------------- To do a single run at 10,000pps bi-directional (or 5kpps in each direction) using the PVP packet path: .. code-block:: bash nfvbench -c /tmp/nfvbench/my_nfvbench.cfg --rate 10kpps NFVbench options used: * ``-c /tmp/nfvbench/my_nfvbench.cfg`` : specify the config file to use (this must reflect the file path from inside the container) * ``--rate 10kpps`` : specify rate of packets for test for both directions using the kpps unit (thousands of packets per second) This should produce a result similar to this (a simple run with the above options should take less than 5 minutes): .. code-block:: none [TBP] 7. Terminating the NFVbench container ------------------------------------- When no longer needed, the container can be terminated using the usual docker commands: .. code-block:: bash docker kill nfvbench docker rm nfvbench