From e633f286772e7667dfd7491a0a7227f9317bc0c8 Mon Sep 17 00:00:00 2001 From: ahothan Date: Wed, 16 May 2018 00:10:36 -0700 Subject: NFVBENCH-92 nfvbench should not look for neutron network in case of l2-loopback Change-Id: I2fc7a46e23d7a989942eb62a4ca9afec8b992088 Signed-off-by: ahothan --- nfvbench/cfg.default.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'nfvbench/cfg.default.yaml') diff --git a/nfvbench/cfg.default.yaml b/nfvbench/cfg.default.yaml index e1c05c3..d7e85c8 100755 --- a/nfvbench/cfg.default.yaml +++ b/nfvbench/cfg.default.yaml @@ -231,8 +231,8 @@ loop_vm_name: 'nfvbench-loop-vm' # - PVVP uses left, middle and right # - for EXT chains, this structure is not relevant - refer to external_networks # Otherwise a new internal network will be created with that name, subnet and CIDR. -# -# segmentation_id can be set to enforce a specific VLAN id - by default (empty) the VLAN id +# +# segmentation_id can be set to enforce a specific VLAN id - by default (empty) the VLAN id # will be assigned by Neutron. # Must be unique for each network # physical_network can be set to pick a specific phsyical network - by default (empty) the @@ -284,14 +284,14 @@ external_networks: right: 'nfvbench-net1' # Use 'true' to enable VLAN tagging of packets generated and sent by the traffic generator -# Leave empty you do not want the traffic generator to insert the VLAN tag. This is +# Leave empty you do not want the traffic generator to insert the VLAN tag. This is # needed for example if VLAN tagging is enabled on switch (trunk mode) or if you want to hook directly to a NIC # By default is set to true (which is the nominal use case with TOR and trunk mode to Trex) vlan_tagging: true # Specify only when you want to override VLAN IDs used for tagging with own values (exactly 2). -# Default behavior of VLAN tagging is to retrieve VLAN IDs from OpenStack networks provided above. -# In case of VxLAN this setting is ignored and only vtep_vlan from traffic generator profile is used. +# Default behavior (empty list) is to retrieve VLAN IDs from OpenStack networks described in external_networks. +# This property is ignored in the case of l2-loopback # Example: [1998, 1999] vlans: [] -- cgit 1.2.3-korg