diff options
Diffstat (limited to 'nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local.loopvm')
| -rw-r--r-- | nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local.loopvm | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local.loopvm b/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local.loopvm new file mode 100644 index 0000000..a83e7ba --- /dev/null +++ b/nfvbenchvm/dib/elements/nfvbenchvm/static/etc/rc.d/rc.local.loopvm @@ -0,0 +1,247 @@ +#!/bin/bash + +touch /var/lock/subsys/local + +# Waiting for cloud-init to generate $NFVBENCH_CONF, retry 60 seconds +NFVBENCH_CONF=/etc/nfvbenchvm.conf +retry=30 +until [ $retry -eq 0 ]; do + if [ -f $NFVBENCH_CONF ]; then break; fi + retry=$[$retry-1] + sleep 2 +done +if [ ! -f $NFVBENCH_CONF ]; then + exit 0 +fi + +# Parse and obtain all configurations +echo "Generating configurations for forwarder..." +eval $(cat $NFVBENCH_CONF) +touch /nfvbench_configured.flag + +# WE assume there are at least 2 cores available for the VM +CPU_CORES=$(grep -c ^processor /proc/cpuinfo) + +# We need at least 1 admin core. +if [ $CPU_CORES -le 2 ]; then + ADMIN_CORES=1 +else + # If the number of cores is even we + # reserve 2 cores for admin (second being idle) so the number of + # workers is either 1 (if CPU_CORES is 2) or always even + if (( $CPU_CORES % 2 )); then + ADMIN_CORES=1 + else + ADMIN_CORES=2 + fi +fi +# 2 vcpus: AW (core 0: Admin, core 1: Worker) +# 3 vcpus: AWW (core 0: Admin, core 1,2: Worker) +# 4 vcpus: AWWU (core 0: Admin, core 1,2: Worker, core 3: Unused) +# 5 vcpus: AWWWW +# 6 vcpus: AWWWWU +WORKER_CORES=$(expr $CPU_CORES - $ADMIN_CORES) +# worker cores are all cores except the admin core (core 0) and the eventual unused core +# AW -> 1 +# AWW -> 1,2 +# AWWU -> 1,2 +WORKER_CORE_LIST=$(seq -s, $ADMIN_CORES $WORKER_CORES) +# always use all cores +CORE_MASK=0x$(echo "obase=16; 2 ^ $CPU_CORES - 1" | bc) + +logger "NFVBENCHVM: CPU_CORES=$CPU_CORES, ADMIN_CORES=$ADMIN_CORES, WORKER_CORES=$WORKER_CORES ($WORKER_CORE_LIST)" + +# CPU isolation optimizations +echo 1 > /sys/bus/workqueue/devices/writeback/cpumask +echo 1 > /sys/devices/virtual/workqueue/cpumask +echo 1 > /proc/irq/default_smp_affinity +for irq in `ls /proc/irq/`; do + if [ -f /proc/irq/$irq/smp_affinity ]; then + echo 1 > /proc/irq/$irq/smp_affinity + fi +done + +# Isolate all cores that are reserved for workers +tuna -c $WORKER_CORE_LIST --isolate + +NET_PATH=/sys/class/net + +get_pci_address() { + # device mapping for CentOS Linux 7: + # lspci: + # 00.03.0 Ethernet controller: Red Hat, Inc. Virtio network device + # 00.04.0 Ethernet controller: Red Hat, Inc. Virtio network device + # /sys/class/net: + # /sys/class/net/eth0 -> ../../devices/pci0000:00/0000:00:03.0/virtio0/net/eth0 + # /sys/class/net/eth1 -> ../../devices/pci0000:00/0000:00:04.0/virtio1/net/eth1 + + mac=$1 + for f in $(ls $NET_PATH/); do + if grep -q "$mac" $NET_PATH/$f/address; then + pci_addr=$(readlink $NET_PATH/$f | cut -d "/" -f5) + # some virtual interfaces match on MAC and do not have a PCI address + if [ "$pci_addr" -a "$pci_addr" != "N/A" ]; then + # Found matching interface + logger "NFVBENCHVM: found interface $f ($pci_addr) matching $mac" + break + else + pci_addr="" + fi + fi; + done + if [ -z "$pci_addr" ]; then + echo "ERROR: Cannot find pci address for MAC $mac" >&2 + logger "NFVBENCHVM ERROR: Cannot find pci address for MAC $mac" + return 1 + fi + echo $pci_addr + return 0 +} + +get_eth_port() { + # device mapping for CentOS Linux 7: + # lspci: + # 00.03.0 Ethernet controller: Red Hat, Inc. Virtio network device + # 00.04.0 Ethernet controller: Red Hat, Inc. Virtio network device + # /sys/class/net: + # /sys/class/net/eth0 -> ../../devices/pci0000:00/0000:00:03.0/virtio0/net/eth0 + # /sys/class/net/eth1 -> ../../devices/pci0000:00/0000:00:04.0/virtio1/net/eth1 + + mac=$1 + for f in $(ls $NET_PATH/); do + if grep -q "$mac" $NET_PATH/$f/address; then + eth_port=$(readlink $NET_PATH/$f | cut -d "/" -f8) + # some virtual interfaces match on MAC and do not have a PCI address + if [ "$eth_port" -a "$eth_port" != "N/A" ]; then + # Found matching interface + logger "NFVBENCHVM: found interface $f ($eth_port) matching $mac" + break + else + eth_port="" + fi + fi; + done + if [ -z "$eth_port" ]; then + echo "ERROR: Cannot find eth port for MAC $mac" >&2 + logger "NFVBENCHVM ERROR: Cannot find eth port for MAC $mac" + return 1 + fi + echo $eth_port + return 0 +} + +# Set VM MANAGEMENT port up and running +if [ $INTF_MGMT_CIDR ] && [ $INTF_MGMT_IP_GW ]; then + if [ $INTF_MAC_MGMT ]; then + ETH_PORT=$(get_eth_port $INTF_MAC_MGMT) + else + ETH_PORT="eth0" + fi + ip addr add $INTF_MGMT_CIDR dev $ETH_PORT + ip link set $ETH_PORT up + ip route add default via $INTF_MGMT_IP_GW dev $ETH_PORT +else + echo "INFO: VM management IP Addresses missing in $NFVBENCH_CONF" +fi + +# Set dynamically interfaces mac values, if VM is spawn without using NFVBench +# and management interface is used on eth0 +if [ -z "$INTF_MAC1" ] && [ -z "$INTF_MAC2" ]; then + INTF_MAC1=$(ip l show eth1 | grep -o -Ei '([a-fA-F0-9:]{17}|[a-fA-F0-9]{12}$)' | head -1) + INTF_MAC2=$(ip l show eth2 | grep -o -Ei '([a-fA-F0-9:]{17}|[a-fA-F0-9]{12}$)' | head -1) +fi + + +# Sometimes the interfaces on the loopback VM will use different drivers, e.g. +# one from vswitch which is virtio based, one is from SRIOV VF. In this case, +# we have to make sure the forwarder uses them in the right order, which is +# especially important if the VM is in a PVVP chain. +if [ $INTF_MAC1 ] && [ $INTF_MAC2 ]; then + PCI_ADDRESS_1=$(get_pci_address $INTF_MAC1) + PCI_ADDRESS_2=$(get_pci_address $INTF_MAC2) +else + echo "ERROR: VM MAC Addresses missing in $NFVBENCH_CONF" + logger "NFVBENCHVM ERROR: VM MAC Addresses missing in $NFVBENCH_CONF" +fi + +if [ $PCI_ADDRESS_1 ] && [ $PCI_ADDRESS_2 ]; then + logger "NFVBENCHVM: Using pci $PCI_ADDRESS_1 ($INTF_MAC1)" + logger "NFVBENCHVM: Using pci $PCI_ADDRESS_2 ($INTF_MAC2)" + # Configure the forwarder + if [ -z "`lsmod | grep igb_uio`" ]; then + modprobe uio + insmod /dpdk/igb_uio.ko + fi + if [ "$FORWARDER" == "testpmd" ]; then + echo "Configuring testpmd..." + # Binding ports to DPDK + dpdk-devbind -b igb_uio $PCI_ADDRESS_1 + dpdk-devbind -b igb_uio $PCI_ADDRESS_2 + screen -dmSL testpmd /dpdk/testpmd \ + -c $CORE_MASK \ + -n 4 \ + -- \ + --nb-ports=2 \ + --burst=32 \ + --txd=256 \ + --rxd=1024 \ + --eth-peer=0,$TG_MAC1 \ + --eth-peer=1,$TG_MAC2 \ + --forward-mode=mac \ + --nb-cores=$WORKER_CORES \ + --txq=$VIF_MQ_SIZE \ + --rxq=$VIF_MQ_SIZE \ + --max-pkt-len=9000 \ + --cmdline-file=/dpdk/testpmd_cmd.txt + echo "testpmd running in screen 'testpmd'" + logger "NFVBENCHVM: testpmd running in screen 'testpmd'" + elif [ "$FORWARDER" == "vpp" ]; then + echo "Configuring vpp..." + cp /vpp/startup.conf /etc/vpp/startup.conf + cp /vpp/vm.conf /etc/vpp/vm.conf + + sed -i "s/{{PCI_ADDRESS_1}}/$PCI_ADDRESS_1/g" /etc/vpp/startup.conf + sed -i "s/{{PCI_ADDRESS_2}}/$PCI_ADDRESS_2/g" /etc/vpp/startup.conf + sed -i "s/{{WORKER_CORES}}/$WORKER_CORES/g" /etc/vpp/startup.conf + sed -i "s/{{VIF_MQ_SIZE}}/${VIF_MQ_SIZE}/g" /etc/vpp/startup.conf + sed -i "s/{{NUM_MBUFS}}/${NUM_MBUFS}/g" /etc/vpp/startup.conf + service vpp start + sleep 10 + + INTFS=`vppctl show int | grep Ethernet | xargs` + INTF_1=`echo $INTFS | awk '{ print $1 }'` + INTF_2=`echo $INTFS | awk '{ print $4 }'` + if [ -z "${TG_MAC1}" ]; then + # vm.conf does not support lines commented with #, so + # we need to remove the line to set the static ARP entry. + sed -i "/{{TG_MAC1}}/d" /etc/vpp/vm.conf + else + sed -i "s/{{TG_MAC1}}/${TG_MAC1}/g" /etc/vpp/vm.conf + fi + if [ -z "${TG_MAC2}" ]; then + sed -i "/{{TG_MAC2}}/d" /etc/vpp/vm.conf + else + sed -i "s/{{TG_MAC2}}/${TG_MAC2}/g" /etc/vpp/vm.conf + fi + sed -i "s/{{INTF_1}}/${INTF_1//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{INTF_2}}/${INTF_2//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{VNF_GATEWAY1_CIDR}}/${VNF_GATEWAY1_CIDR//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{VNF_GATEWAY2_CIDR}}/${VNF_GATEWAY2_CIDR//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{TG_NET1}}/${TG_NET1//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{TG_NET2}}/${TG_NET2//\//\/}/g" /etc/vpp/vm.conf + sed -i "s/{{TG_GATEWAY1_IP}}/${TG_GATEWAY1_IP}/g" /etc/vpp/vm.conf + sed -i "s/{{TG_GATEWAY2_IP}}/${TG_GATEWAY2_IP}/g" /etc/vpp/vm.conf + service vpp restart + logger "NFVBENCHVM: vpp service restarted" + else + echo "ERROR: Unknown forwarder value. Accepted values: testpmd or vpp" + exit 1 + fi +else + echo "ERROR: Cannot find PCI Address from MAC" + echo "$INTF_MAC1: $PCI_ADDRESS_1" + echo "$INTF_MAC2: $PCI_ADDRESS_2" + logger "NFVBENCHVM ERROR: Cannot find PCI Address from MAC" +fi + +exit 0
\ No newline at end of file |