diff options
Diffstat (limited to 'nfvbench')
-rw-r--r-- | nfvbench/cfg.default.yaml | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/nfvbench/cfg.default.yaml b/nfvbench/cfg.default.yaml index a462383..ed6ead8 100644 --- a/nfvbench/cfg.default.yaml +++ b/nfvbench/cfg.default.yaml @@ -260,9 +260,10 @@ external_networks: left: 'nfvbench-net0' right: 'nfvbench-net1' -# Use 'true' to enable VLAN tagging of packets coming from traffic generator -# Leave empty if VLAN tagging is enabled on switch or if you want to hook directly to a NIC -# Else by default is set to true (which is the nominal use case with TOR and trunk mode to Trex) +# Use 'true' to enable VLAN tagging of packets generated and sent by the traffic generator +# Leave empty you do not want the traffic generator to insert the VLAN tag. This is +# needed for example if VLAN tagging is enabled on switch (trunk mode) or if you want to hook directly to a NIC +# By default is set to true (which is the nominal use case with TOR and trunk mode to Trex) vlan_tagging: true # Specify only when you want to override VLAN IDs used for tagging with own values (exactly 2). @@ -343,7 +344,7 @@ measurement: # The accuracy of NDR and PDR as a percnetage of line rate; The exact NDR # or PDR should be within `load_epsilon` line rate % from the one calculated. # For example, with a value 0.1, and a line rate of 10Gbps, the accuracy - # of NDR and PDR will be within 0.1% Of 10Gbps or 10Kbps. + # of NDR and PDR will be within 0.1% Of 10Gbps or 10Mbps. # The lower the value the more iterations and the longer it will take to find the NDR/PDR. # In practice, due to the precision of the traffic generator it is not recommended to # set it to lower than 0.1 |