diff options
Diffstat (limited to 'nfvbench/cfg.default.yaml')
-rwxr-xr-x | nfvbench/cfg.default.yaml | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/nfvbench/cfg.default.yaml b/nfvbench/cfg.default.yaml index bc40af4..3138420 100755 --- a/nfvbench/cfg.default.yaml +++ b/nfvbench/cfg.default.yaml @@ -152,6 +152,23 @@ traffic_generator: udp_src_port: udp_dst_port: + # VxLAN only: optionally specify what VLAN tag to use for the VxLAN overlay + # This is used if the vxlan tunnels are running on a specific VLAN. + # Leave empty if there is no VLAN tagging required, or specify the VLAN id to use + # for all VxLAN tunneled traffic + vtep_vlan: + # VxLAN only: VNI range for VXLAN encapsulation [start_vni, end_vni] [5000, 6000] + # VNI can have a value from range 5000-16777216 + # For PVP, VNIs are allocated consecutively - 2 per each chain + # Chain 1: 5000, 5001; Chain 2: 5002, 5003; Chain X: 5000+x, 5000+x+1 + # For PVVP scenario VNIs allocated consecutively - 3 per each chain + # Chain 1: 5000, 5001, 5002; Chain 2: 5003, 5004, 5005; Chain X: 5000+x, 5000+x+1, 5000+x+1 + vnis: + # VxLAN only: local/source vteps IP addresses for port 0 and 1 ['10.1.1.230', '10.1.1.231'] + src_vteps: + # VxLAN only: remote IP address of the remote VTEPs that terminate all tunnels originating from local VTEPs + dst_vtep: + # L2 ADDRESSING OF UDP PACKETS # Lists of dest MAC addresses to use on each traffic generator port (one dest MAC per chain) # Leave empty for PVP, PVVP, EXT with ARP @@ -304,11 +321,17 @@ external_networks: left: 'ext-lnet' right: 'ext-rnet' +# Use 'true' to enable VXLAN encapsulation support and sent by the traffic generator +# When this option enabled internal networks 'network type' parameter value should be 'vxlan' +vxlan: false + # Use 'true' to enable VLAN tagging of packets generated and sent by the traffic generator # Leave empty or set to false if you do not want the traffic generator to insert the VLAN tag (this is # needed for example if VLAN tagging is enabled on switch (access mode) or if you want to hook # directly to a NIC). # By default is set to true (which is the nominal use case with TOR and trunk mode to Trex ports) +# If VxLAN is enabled, this option should be set to false (vlan tagging for encapsulated packets +# is not supported). Use the vtep_vlan option to enable vlan tagging for the VxLAN overlay network. vlan_tagging: true # Used only in the case of EXT chain and no openstack to specify the VLAN IDs to use. |