From 8b42967bdea693d41ffe63f1a50746261ba6b324 Mon Sep 17 00:00:00 2001 From: Georg Kunz Date: Thu, 11 Aug 2016 10:02:29 +0200 Subject: Preparing files for global review Change-Id: I5db23e973f936aace0123eb40ac24084ff1bdbce Signed-off-by: Georg Kunz --- docs/requirements/use_cases/l3vpn_ecmp.rst | 175 ----------------------------- 1 file changed, 175 deletions(-) delete mode 100644 docs/requirements/use_cases/l3vpn_ecmp.rst (limited to 'docs/requirements/use_cases/l3vpn_ecmp.rst') diff --git a/docs/requirements/use_cases/l3vpn_ecmp.rst b/docs/requirements/use_cases/l3vpn_ecmp.rst deleted file mode 100644 index 7bcb64f..0000000 --- a/docs/requirements/use_cases/l3vpn_ecmp.rst +++ /dev/null @@ -1,175 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) Bin Hu - -L3VPN: ECMP Load Splitting Case (Anycast) ------------------------------------------ - -Description -~~~~~~~~~~~ - -In this use case, multiple instances of a VNF are reachable through the same IP. -The networking infrastructure is then responsible for spreading the network load -across the VNF instances using Equal-Cost Multi-Path (ECMP) or perform a -fail-over in case of a VNF failure. - -There are 2 hosts (compute nodes). SDN Controller A and vForwarder A are provided by -Vendor A, and run on host A. SDN Controller B and vForwarder B are provided by -Vendor B, and run on host B. - -There is one tenant. Tenant 1 creates L3VPN Blue with subnet 10.1.1.0/24. - -The network topology is shown in :numref:`l3vpn-ecmp-figure`: - -.. figure:: images/l3vpn-ecmp.png - :name: l3vpn-ecmp-figure - :width: 100% - -In L3VPN Blue, VNF1.1 and VNF1.2 are spawned on host A, attached to subnet 10.1.1.0/24 -and assigned the same IP address 10.1.1.5. VNF1.3 is spawned on host B, attached to -subnet 10.1.1.0/24 and assigned the same IP addresses 10.1.1.5. VNF 2 and VNF 3 are spawned -on host A and B respectively, attached to subnet 10.1.1.0/24, and assigned different IP -addresses 10.1.1.6 and 10.1.1.3 respectively. - -Here, the Network VRF Policy Resource is ``ECMP/AnyCast``. Traffic to the -anycast IP **10.1.1.5** can be load split from either WAN GW or another VM like -G5. - - - -Current implementation -~~~~~~~~~~~~~~~~~~~~~~ - -Support for creating and managing L3VPNs is, in general, available in OpenStack -Neutron by means of the BGPVPN project [BGPVPN]_. However, the BGPVPN project -does not yet fully support ECMP as described in the following. - -There are (at least) two different approached to configuring ECMP: - -1. Using Neutron ports with identical IP addresses, or - -2. Using Neutron ports with unique IPs addresses and creating static routes to a - common IP prefix with next hops pointing to the unique IP addresses. - - - -Ports with identical IP addresses -+++++++++++++++++++++++++++++++++ - -In this approach, multiple Neutron ports using the same IP address are created. -In the current Neutron architecture, a port has to reside in a specific Neutron -network. However, re-using the same IP address multiple times in a given Neutron -network is not possible as this would create an IP collision. As a consequence, -creating one Neutron network for each port is required. - -Given multiple Neutron networks, the BGPVPN API allows for associating those -networks with the same VPN. It is then up to the networking backend to implement -ECMP load balancing. This behavior and the corresponding API for configuring the -behavior is currently not available. It is nevertheless on the road map of the -BGPVPN project. - -.. **Georg: we could add an API usage example here similarly to the one below** - - -Static Routes to ports with unique IP addresses -+++++++++++++++++++++++++++++++++++++++++++++++ - -In this approach, Neutron ports are assigned unique IPs and static routes -pointing to the same ECMP load-balanced prefix are created. The static routes -define the unique Neutron port IPs as next-hop addresses. - -Currently, the API for static routes is not yet available in the BGPVPN project, -but it is on the road map. The following work flow shows how to realize this -particular use case under the assumption that support for static routes is -available in the BGPVPN API. - - -1. Create Neutron network for tenant "Blue" - - ``neutron net-create --tenant-id Blue net1`` - - -2. Create subnet for the network of tenant "Blue" - - ``neutron subnet-create --tenant-id Blue --name subnet1 net1 5.1.1.0/24`` - - -3. Create Neutron ports in the network of tenant "Blue" - - ``neutron port-create --tenant-id Blue --name G1 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.1 net1`` - - ``neutron port-create --tenant-id Blue --name G2 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.2 net1`` - - ``neutron port-create --tenant-id Blue --name G3 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.3 net1`` - - ``neutron port-create --tenant-id Blue --name G4 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.4 net1`` - - ``neutron port-create --tenant-id Blue --name G5 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.5 net1`` - - ``neutron port-create --tenant-id Blue --name G6 --fixed-ip subnet_id=subnet1,ip_address=5.1.1.6 net1`` - - -4. Create a L3VPN for tenant "Blue" - - ``neutron bgpvpn-create --tenant-id Blue --route-target AS:100 vpn1`` - - -5. Associate the BGPVPN with the network of tenant "Blue" - - ``neutron bgpvpn-network-associate --tenant-id Blue --network-id net1 vpn1`` - - -6. Create static routes which point to the same target - - ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.1 vpn1`` - - ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.2 vpn1`` - - ``neutron bgpvpn-static-route-add --tenant-id Blue --cidr 10.1.1.5/32 --nexthop-ip 5.1.1.3 vpn1`` - - - -Gaps in the current solution -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Given the use case description and the currently available implementation in -OpenStack provided by BGPVPN project, we identify the following gaps: - -* [L3VPN-ECMP-GAP1] Static routes are not yet supported by the BGPVPN project. - - Currently, no API for configuring static routes is available in the BGPVPN - project. This feature is on the road map, however. - - -* [L3VPN-ECMP-GAP2] Behavior not defined for multiple Neutron ports of the same - IP - - The Neutron and BGPVPN API allow for creating multiple ports with the same - IP in different networks and associating the networks with the same VPN. The - exact behavior of this configuration is however not defined and an API for - configuring the behavior (load-balancing or fail-over) is missing. Development - of this feature is on the road map of the project, however. - - -* [L3VPN-ECMP-GAP3] It is not possible to assign the same IP to multiple Neutron - ports within the same Neutron subnet. - - This is due to the fundamental requirement of avoiding IP collisions within - the L2 domain which is a Neutron network. - - -Conclusions -~~~~~~~~~~~ - -In the context of the ECMP use case, three gaps have been -identified. Gap [L3VPN-ECMP-GAP1] and [L3VPN-ECMP-GAP2] are missing or undefined -functionality in the BGPVPN project. There is no architectural hindrance -preventing the implementation of the missing features in the BGPVPN project as -well as in Neutron. - -The third gap [L3VPN-ECMP-GAP3] is based on the fact that Neutron ports always -have to exist in a Neutron network. As a consequence, in order to create ports -with the same IP, multiple networks must be used. This port-network binding -will most likely not be relaxed in future releases of Neutron to retain backwards -compatibility. A clean alternative to Neutron can instead provide more modeling -flexibility. -- cgit 1.2.3-korg