.. Copyright 2011-2012 OpenStack Foundation All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. ==================== Configuring Keystone ==================== .. toctree:: :maxdepth: 1 man/keystone-manage man/keystone-all Once Keystone is installed, it is configured via a primary configuration file (``etc/keystone.conf``), a PasteDeploy configuration file (``etc/keystone-paste.ini``), possibly a separate logging configuration file, and initializing data into Keystone using the command line client. By default, Keystone starts a service on `IANA-assigned port 35357 `_. This may overlap with your system's ephemeral port range, so another process may already be using this port without being explicitly configured to do so. To prevent this scenario from occurring, it's recommended that you explicitly exclude port 35357 from the available ephemeral port range. On a Linux system, this would be accomplished by: .. code-block:: bash $ sysctl -w 'sys.net.ipv4.ip_local_reserved_ports=35357' To make the above change persistent, ``net.ipv4.ip_local_reserved_ports = 35357`` should be added to ``/etc/sysctl.conf`` or to ``/etc/sysctl.d/keystone.conf``. Starting and Stopping Keystone under Eventlet ============================================= .. WARNING:: Running keystone under eventlet has been deprecated as of the Kilo release. Support for utilizing eventlet will be removed as of the M-release. The recommended deployment is to run keystone in a WSGI server (e.g. ``mod_wsgi`` under ``HTTPD``). Keystone can be run using either its built-in eventlet server or it can be run embedded in a web server. While the eventlet server is convenient and easy to use, it's lacking in security features that have been developed into Internet- based web servers over the years. As such, running the eventlet server as described in this section is not recommended. Start Keystone services using the command: .. code-block:: bash $ keystone-all Invoking this command starts up two ``wsgi.Server`` instances, ``admin`` (the administration API) and ``main`` (the primary/public API interface). Both services are configured to run in a single process. .. NOTE:: The separation into ``admin`` and ``main`` interfaces is an historical anomaly. The new V3 API provides the same interface on both the admin and main interfaces (this can be configured in ``keystone-paste.ini``, but the default is to have both the same). The V2.0 API provides a limited public API (getting and validating tokens) on ``main``, and an administrative API (which can include creating users and such) on the ``admin`` interface. Stop the process using ``Control-C``. .. NOTE:: If you have not already configured Keystone, it may not start as expected. Configuration Files =================== The Keystone configuration files are an ``ini`` file format based on Paste_, a common system used to configure Python WSGI based applications. The PasteDeploy configuration entries (WSGI pipeline definitions) can be provided in a separate ``keystone-paste.ini`` file, while general and driver-specific configuration parameters are in the primary configuration file ``keystone.conf``. .. NOTE:: Since keystone's PasteDeploy configuration file has been separated from the main keystone configuration file, ``keystone.conf``, all local configuration or driver-specific configuration parameters must go in the main keystone configuration file instead of the PasteDeploy configuration file, i.e. configuration in ``keystone-paste.ini`` is not supported. The primary configuration file is organized into the following sections: * ``[DEFAULT]`` - General configuration * ``[assignment]`` - Assignment system driver configuration * ``[auth]`` - Authentication plugin configuration * ``[cache]`` - Caching layer configuration * ``[catalog]`` - Service catalog driver configuration * ``[credential]`` - Credential system driver configuration * ``[endpoint_filter]`` - Endpoint filtering extension configuration * ``[endpoint_policy]`` - Endpoint policy extension configuration * ``[eventlet_server]`` - Eventlet server configuration * ``[eventlet_server_ssl]`` - Eventlet server SSL configuration * ``[federation]`` - Federation driver configuration * ``[identity]`` - Identity system driver configuration * ``[identity_mapping]`` - Identity mapping system driver configuration * ``[kvs]`` - KVS storage backend configuration * ``[ldap]`` - LDAP configuration options * ``[memcache]`` - Memcache configuration options * ``[oauth1]`` - OAuth 1.0a system driver configuration * ``[os_inherit]`` - Inherited role assignment extension * ``[paste_deploy]`` - Pointer to the PasteDeploy configuration file * ``[policy]`` - Policy system driver configuration for RBAC * ``[resource]`` - Resource system driver configuration * ``[revoke]`` - Revocation system driver configuration * ``[role]`` - Role system driver configuration * ``[saml]`` - SAML configuration options * ``[signing]`` - Cryptographic signatures for PKI based tokens * ``[ssl]`` - SSL certificate generation configuration * ``[token]`` - Token driver & token provider configuration * ``[trust]`` - Trust extension configuration The Keystone primary configuration file is expected to be named ``keystone.conf``. When starting Keystone, you can specify a different configuration file to use with ``--config-file``. If you do **not** specify a configuration file, Keystone will look in the following directories for a configuration file, in order: * ``~/.keystone/`` * ``~/`` * ``/etc/keystone/`` * ``/etc/`` PasteDeploy configuration file is specified by the ``config_file`` parameter in ``[paste_deploy]`` section of the primary configuration file. If the parameter is not an absolute path, then Keystone looks for it in the same directories as above. If not specified, WSGI pipeline definitions are loaded from the primary configuration file. Domain-specific Drivers ----------------------- .. NOTE:: This functionality is new in Juno. Keystone supports the option (disabled by default) to specify identity driver configurations on a domain by domain basis, allowing, for example, a specific domain to have its own LDAP or SQL server. This is configured by specifying the following options: .. code-block:: ini [identity] domain_specific_drivers_enabled = True domain_config_dir = /etc/keystone/domains Setting ``domain_specific_drivers_enabled`` to ``True`` will enable this feature, causing Keystone to look in the ``domain_config_dir`` for config files of the form:: keystone..conf Options given in the domain specific configuration file will override those in the primary configuration file for the specified domain only. Domains without a specific configuration file will continue to use the options from the primary configuration file. .. NOTE:: It is important to notice that by enabling this configuration, the operations of listing all users and listing all groups are not supported, those calls will need that either a domain filter is specified or the usage of a domain scoped token. .. NOTE:: Keystone does not support moving the contents of a domain (i.e. "its" users and groups) from one backend to another, nor group membership across backend boundaries. .. NOTE:: To delete a domain that uses a domain specific backend, it's necessary to first disable it, remove its specific configuration file (i.e. its corresponding keystone..conf) and then restart the Identity server. .. NOTE:: Although Keystone supports multiple LDAP backends via domain specific configuration files, it currently only supports one SQL backend. This could be either the default driver or a single domain-specific backend, perhaps for storing service users in a predominantly LDAP installation. Due to the need for user and group IDs to be unique across an OpenStack installation and for Keystone to be able to deduce which domain and backend to use from just a user or group ID, it dynamically builds a persistent identity mapping table from a public ID to the actual domain, local ID (within that backend) and entity type. The public ID is automatically generated by Keystone when it first encounters the entity. If the local ID of the entity is from a backend that does not guarantee to generate UUIDs, a hash algorithm will generate a public ID for that entity, which is what will be exposed by Keystone. The use of a hash will ensure that if the public ID needs to be regenerated then the same public ID will be created. This is useful if you are running multiple keystones and want to ensure the same ID would be generated whichever server you hit. While Keystone will dynamically maintain the identity mapping, including removing entries when entities are deleted via the Keystone, for those entities in backends that are managed outside of Keystone (e.g. a Read Only LDAP), Keystone will not know if entities have been deleted and hence will continue to carry stale identity mappings in its table. While benign, keystone provides an ability for operators to purge the mapping table of such stale entries using the keystone-manage command, for example: .. code-block:: bash $ keystone-manage mapping_purge --domain-name DOMAINA --local-id abc@de.com A typical usage would be for an operator to obtain a list of those entries in an external backend that had been deleted out-of-band to Keystone, and then call keystone-manage to purge those entries by specifying the domain and local-id. The type of the entity (i.e. user or group) may also be specified if this is needed to uniquely identify the mapping. Since public IDs can be regenerated **with the correct generator implementation**, if the details of those entries that have been deleted are not available, then it is safe to simply bulk purge identity mappings periodically, for example: .. code-block:: bash $ keystone-manage mapping_purge --domain-name DOMAINA will purge all the mappings for DOMAINA. The entire mapping table can be purged with the following command: .. code-block:: bash $ keystone-manage mapping_purge --all Public ID Generators -------------------- Keystone supports a customizable public ID generator and it is specified in the ``[identity_mapping]`` section of the configuration file. Keystone provides a sha256 generator as default, which produces regeneratable public IDs. The generator algorithm for public IDs is a balance between key size (i.e. the length of the public ID), the probability of collision and, in some circumstances, the security of the public ID. The maximum length of public ID supported by Keystone is 64 characters, and the default generator (sha256) uses this full capability. Since the public ID is what is exposed externally by Keystone and potentially stored in external systems, some installations may wish to make use of other generator algorithms that have a different trade-off of attributes. A different generator can be installed by configuring the following property: * ``generator`` - identity mapping generator. Defaults to ``keystone.identity.generators.sha256.Generator`` .. WARNING:: Changing the generator may cause all existing public IDs to be become invalid, so typically the generator selection should be considered immutable for a given installation. Authentication Plugins ---------------------- .. NOTE:: This feature is only supported by Keystone for the Identity API v3 clients. Keystone supports authentication plugins and they are specified in the ``[auth]`` section of the configuration file. However, an authentication plugin may also have its own section in the configuration file. It is up to the plugin to register its own configuration options. * ``methods`` - comma-delimited list of authentication plugin names * ```` - specify the class which handles to authentication method, in the same manner as one would specify a backend driver. Keystone provides three authentication methods by default. ``password`` handles password authentication and ``token`` handles token authentication. ``external`` is used in conjunction with authentication performed by a container web server that sets the ``REMOTE_USER`` environment variable. For more details, refer to :doc:`External Authentication `. How to Implement an Authentication Plugin ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ All authentication plugins must extend the ``keystone.auth.core.AuthMethodHandler`` class and implement the ``authenticate()`` method. The ``authenticate()`` method expects the following parameters. * ``context`` - Keystone's request context * ``auth_payload`` - the content of the authentication for a given method * ``auth_context`` - user authentication context, a dictionary shared by all plugins. It contains ``method_names`` and ``extras`` by default. ``method_names`` is a list and ``extras`` is a dictionary. If successful, the ``authenticate()`` method must provide a valid ``user_id`` in ``auth_context`` and return ``None``. ``method_name`` is used to convey any additional authentication methods in case authentication is for re-scoping. For example, if the authentication is for re-scoping, a plugin must append the previous method names into ``method_names``. Also, a plugin may add any additional information into ``extras``. Anything in ``extras`` will be conveyed in the token's ``extras`` field. If authentication requires multiple steps, the ``authenticate()`` method must return the payload in the form of a dictionary for the next authentication step. If authentication is unsuccessful, the ``authenticate()`` method must raise a ``keystone.exception.Unauthorized`` exception. Simply add the new plugin name to the ``methods`` list along with your plugin class configuration in the ``[auth]`` sections of the configuration file to deploy it. If the plugin requires additional configurations, it may register its own section in the configuration file. Plugins are invoked in the order in which they are specified in the ``methods`` attribute of the ``authentication`` request body. If multiple plugins are invoked, all plugins must succeed in order to for the entire authentication to be successful. Furthermore, all the plugins invoked must agree on the ``user_id`` in the ``auth_context``. The ``REMOTE_USER`` environment variable is only set from a containing webserver. However, to ensure that a user must go through other authentication mechanisms, even if this variable is set, remove ``external`` from the list of plugins specified in ``methods``. This effectively disables external authentication. For more details, refer to :doc:`ExternalAuthentication `. Token Persistence Driver ------------------------ Keystone supports customizable token persistence drivers. These can be specified in the ``[token]`` section of the configuration file. Keystone provides three non-test persistence backends. These can be set with the ``[token]\driver`` configuration option. The drivers Keystone provides are: * ``keystone.token.persistence.backends.memcache_pool.Token`` - The pooled memcached token persistence engine. This backend supports the concept of pooled memcache client object (allowing for the re-use of the client objects). This backend has a number of extra tunable options in the ``[memcache]`` section of the config. * ``keystone.token.persistence.backends.sql.Token`` - The SQL-based (default) token persistence engine. * ``keystone.token.persistence.backends.memcache.Token`` - The memcached based token persistence backend. This backend relies on ``dogpile.cache`` and stores the token data in a set of memcached servers. The servers URLs are specified in the ``[memcache]\servers`` configuration option in the Keystone config. .. WARNING:: It is recommended you use the ``keystone.token.persistence.backends.memcache_pool.Token`` backend instead of ``keystone.token.persistence.backends.memcache.Token`` as the token persistence driver if you are deploying Keystone under eventlet instead of Apache + mod_wsgi. This recommendation is due to known issues with the use of ``thread.local`` under eventlet that can allow the leaking of memcache client objects and consumption of extra sockets. Token Provider -------------- Keystone supports customizable token provider and it is specified in the ``[token]`` section of the configuration file. Keystone provides both UUID and PKI token providers. However, users may register their own token provider by configuring the following property. * ``provider`` - token provider driver. Defaults to ``keystone.token.providers.uuid.Provider`` UUID, PKI, PKIZ, or Fernet? ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Each token format uses different technologies to achieve various performance, scaling and architectural requirements. UUID tokens contain randomly generated UUID4 payloads that are issued and validated by the identity service. They are encoded using their hex digest for transport and are thus URL-friendly. They must be persisted by the identity service in order to be later validated. Revoking them is simply a matter of deleting them from the token persistence backend. Both PKI and PKIZ tokens contain JSON payloads that represent the entire token validation response that would normally be retrieved from keystone. The payload is then signed using `Cryptographic Message Syntax (CMS) `_. The combination of CMS and the exhaustive payload allows PKI and PKIZ tokens to be verified offline using keystone's public signing key. The only reason for them to be persisted by the identity service is to later build token revocation *lists* (explicit lists of tokens that have been revoked), otherwise they are theoretically ephemeral when supported by token revocation *events* (which describe invalidated tokens rather than enumerate them). PKIZ tokens add zlib compression after signing to achieve a smaller overall token size. To make them URL-friendly, PKI tokens are base64 encoded and then arbitrarily manipulated to replace unsafe characters with safe ones whereas PKIZ tokens use conventional base64url encoding. Due to the size of the payload and the overhead incurred by the CMS format, both PKI and PKIZ tokens may be too long to fit in either headers or URLs if they contain extensive service catalogs or other additional attributes. Some third-party applications such as web servers and clients may need to be recompiled from source to customize the limitations that PKI and PKIZ tokens would otherwise exceed). Both PKI and PKIZ tokens require signing certificates which may be created using ``keystone-manage pki_setup`` for demonstration purposes (this is not recommended for production deployments: use certificates issued by an trusted CA instead). Fernet tokens contain a limited amount of identity and authorization data in a `MessagePacked `_ payload. The payload is then wrapped as a `Fernet `_ message for transport, where Fernet provides the required web safe characteristics for use in URLs and headers. Fernet tokens require symmetric encryption keys which can be established using ``keystone-manage fernet_setup`` and periodically rotated using ``keystone-manage fernet_rotate``. .. WARNING:: UUID, PKI, PKIZ, and Fernet tokens are all bearer tokens, meaning that they must be protected from unnecessary disclosure to prevent unauthorized access. Caching Layer ------------- Keystone supports a caching layer that is above the configurable subsystems (e.g. ``token``, ``identity``, etc). Keystone uses the `dogpile.cache`_ library which allows for flexible cache backends. The majority of the caching configuration options are set in the ``[cache]`` section. However, each section that has the capability to be cached usually has a ``caching`` boolean value that will toggle caching for that specific section. The current default behavior is that subsystem caching is enabled, but the global toggle is set to disabled. ``[cache]`` configuration section: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * ``enabled`` - enables/disables caching across all of keystone * ``debug_cache_backend`` - enables more in-depth logging from the cache backend (get, set, delete, etc) * ``backend`` - the caching backend module to use e.g. ``dogpile.cache.memcached`` .. NOTE:: A given ``backend`` must be registered with ``dogpile.cache`` before it can be used. The default backend is the ``Keystone`` no-op backend (``keystone.common.cache.noop``). If caching is desired a different backend will need to be specified. Current functional backends are: * ``dogpile.cache.memcached`` - Memcached backend using the standard `python-memcached`_ library * ``dogpile.cache.pylibmc`` - Memcached backend using the `pylibmc`_ library * ``dogpile.cache.bmemcached`` - Memcached using `python-binary-memcached`_ library. * ``dogpile.cache.redis`` - `Redis`_ backend * ``dogpile.cache.dbm`` - local DBM file backend * ``dogpile.cache.memory`` - in-memory cache * ``keystone.cache.mongo`` - MongoDB as caching backend * ``keystone.cache.memcache_pool`` - An eventlet safe implementation of ``dogpile.cache.memcached``. This implementation also provides client connection re-use. .. WARNING:: ``dogpile.cache.memory`` is not suitable for use outside of unit testing as it does not cleanup its internal cache on cache expiration, does not provide isolation to the cached data (values in the store can be inadvertently changed without extra layers of data protection added), and does not share cache between processes. This means that caching and cache invalidation will not be consistent or reliable when using ``Keystone`` and the ``dogpile.cache.memory`` backend under any real workload. .. WARNING:: Do not use ``dogpile.cache.memcached`` backend if you are deploying Keystone under eventlet. There are known issues with the use of ``thread.local`` under eventlet that can allow the leaking of memcache client objects and consumption of extra sockets. * ``expiration_time`` - int, the default length of time to cache a specific value. A value of ``0`` indicates to not cache anything. It is recommended that the ``enabled`` option be used to disable cache instead of setting this to ``0``. * ``backend_argument`` - an argument passed to the backend when instantiated ``backend_argument`` should be specified once per argument to be passed to the backend and in the format of ``:``. e.g.: ``backend_argument = host:localhost`` * ``proxies`` - comma delimited list of `ProxyBackends`_ e.g. ``my.example.Proxy, my.example.Proxy2`` Current Keystone systems that have caching capabilities: * ``token`` The token system has a separate ``cache_time`` configuration option, that can be set to a value above or below the global ``expiration_time`` default, allowing for different caching behavior from the other systems in ``Keystone``. This option is set in the ``[token]`` section of the configuration file. The Token Revocation List cache time is handled by the configuration option ``revocation_cache_time`` in the ``[token]`` section. The revocation list is refreshed whenever a token is revoked. It typically sees significantly more requests than specific token retrievals or token validation calls. * ``resource`` The resource system has a separate ``cache_time`` configuration option, that can be set to a value above or below the global ``expiration_time`` default, allowing for different caching behavior from the other systems in ``Keystone``. This option is set in the ``[resource]`` section of the configuration file. Currently ``resource`` has caching for ``project`` and ``domain`` specific requests (primarily around the CRUD actions). The ``list_projects`` and ``list_domains`` methods are not subject to caching. .. WARNING:: Be aware that if a read-only ``resource`` backend is in use, the cache will not immediately reflect changes on the back end. Any given change may take up to the ``cache_time`` (if set in the ``[resource]`` section of the configuration) or the global ``expiration_time`` (set in the ``[cache]`` section of the configuration) before it is reflected. If this type of delay (when using a read-only ``resource`` backend) is an issue, it is recommended that caching be disabled on ``resource``. To disable caching specifically on ``resource``, in the ``[resource]`` section of the configuration set ``caching`` to ``False``. * ``role`` Currently ``role`` has caching for ``get_role``, but not for ``list_roles``. The role system has a separate ``cache_time`` configuration option, that can be set to a value above or below the global ``expiration_time`` default, allowing for different caching behavior from the other systems in ``Keystone``. This option is set in the ``[role]`` section of the configuration file. .. WARNING:: Be aware that if a read-only ``role`` backend is in use, the cache will not immediately reflect changes on the back end. Any given change may take up to the ``cache_time`` (if set in the ``[role]`` section of the configuration) or the global ``expiration_time`` (set in the ``[cache]`` section of the configuration) before it is reflected. If this type of delay (when using a read-only ``role`` backend) is an issue, it is recommended that caching be disabled on ``role``. To disable caching specifically on ``role``, in the ``[role]`` section of the configuration set ``caching`` to ``False``. For more information about the different backends (and configuration options): * `dogpile.cache.backends.memory`_ * `dogpile.cache.backends.memcached`_ * `dogpile.cache.backends.redis`_ * `dogpile.cache.backends.file`_ * :py:mod:`keystone.common.cache.backends.mongo` .. _`dogpile.cache`: http://dogpilecache.readthedocs.org/en/latest/ .. _`python-memcached`: http://www.tummy.com/software/python-memcached/ .. _`pylibmc`: http://sendapatch.se/projects/pylibmc/index.html .. _`python-binary-memcached`: https://github.com/jaysonsantos/python-binary-memcached .. _`Redis`: http://redis.io/ .. _`dogpile.cache.backends.memory`: http://dogpilecache.readthedocs.org/en/latest/api.html#memory-backend .. _`dogpile.cache.backends.memcached`: http://dogpilecache.readthedocs.org/en/latest/api.html#memcached-backends .. _`dogpile.cache.backends.redis`: http://dogpilecache.readthedocs.org/en/latest/api.html#redis-backends .. _`dogpile.cache.backends.file`: http://dogpilecache.readthedocs.org/en/latest/api.html#file-backends .. _`ProxyBackends`: http://dogpilecache.readthedocs.org/en/latest/api.html#proxy-backends .. _`PyMongo API`: http://api.mongodb.org/python/current/api/pymongo/index.html Certificates for PKI -------------------- PKI stands for Public Key Infrastructure. Tokens are documents, cryptographically signed using the X509 standard. In order to work correctly token generation requires a public/private key pair. The public key must be signed in an X509 certificate, and the certificate used to sign it must be available as Certificate Authority (CA) certificate. These files can be either externally generated or generated using the ``keystone-manage`` utility. The files used for signing and verifying certificates are set in the Keystone configuration file. The private key should only be readable by the system user that will run Keystone. The values that specify the certificates are under the ``[signing]`` section of the configuration file. The configuration values are: * ``certfile`` - Location of certificate used to verify tokens. Default is ``/etc/keystone/ssl/certs/signing_cert.pem`` * ``keyfile`` - Location of private key used to sign tokens. Default is ``/etc/keystone/ssl/private/signing_key.pem`` * ``ca_certs`` - Location of certificate for the authority that issued the above certificate. Default is ``/etc/keystone/ssl/certs/ca.pem`` Signing Certificate Issued by External CA ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You may use a signing certificate issued by an external CA instead of generated by ``keystone-manage``. However, certificate issued by external CA must satisfy the following conditions: * all certificate and key files must be in Privacy Enhanced Mail (PEM) format * private key files must not be protected by a password The basic workflow for using a signing certificate issued by an external CA involves: 1. `Request Signing Certificate from External CA`_ 2. Convert certificate and private key to PEM if needed 3. `Install External Signing Certificate`_ Request Signing Certificate from External CA ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ One way to request a signing certificate from an external CA is to first generate a PKCS #10 Certificate Request Syntax (CRS) using OpenSSL CLI. First create a certificate request configuration file (e.g. ``cert_req.conf``): .. code-block:: ini [ req ] default_bits = 2048 default_keyfile = keystonekey.pem default_md = default prompt = no distinguished_name = distinguished_name [ distinguished_name ] countryName = US stateOrProvinceName = CA localityName = Sunnyvale organizationName = OpenStack organizationalUnitName = Keystone commonName = Keystone Signing emailAddress = keystone@openstack.org Then generate a CRS with OpenSSL CLI. **Do not encrypt the generated private key. The -nodes option must be used.** For example: .. code-block:: bash $ openssl req -newkey rsa:2048 -keyout signing_key.pem -keyform PEM -out signing_cert_req.pem -outform PEM -config cert_req.conf -nodes If everything is successfully, you should end up with ``signing_cert_req.pem`` and ``signing_key.pem``. Send ``signing_cert_req.pem`` to your CA to request a token signing certificate and make sure to ask the certificate to be in PEM format. Also, make sure your trusted CA certificate chain is also in PEM format. Install External Signing Certificate ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Assuming you have the following already: * ``signing_cert.pem`` - (Keystone token) signing certificate in PEM format * ``signing_key.pem`` - corresponding (non-encrypted) private key in PEM format * ``cacert.pem`` - trust CA certificate chain in PEM format Copy the above to your certificate directory. For example: .. code-block:: bash $ mkdir -p /etc/keystone/ssl/certs $ cp signing_cert.pem /etc/keystone/ssl/certs/ $ cp signing_key.pem /etc/keystone/ssl/certs/ $ cp cacert.pem /etc/keystone/ssl/certs/ $ chmod -R 700 /etc/keystone/ssl/certs **Make sure the certificate directory is root-protected.** If your certificate directory path is different from the default ``/etc/keystone/ssl/certs``, make sure it is reflected in the ``[signing]`` section of the configuration file. Generating a Signing Certificate using pki_setup ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ``keystone-manage pki_setup`` is a development tool. We recommend that you do not use ``keystone-manage pki_setup`` in a production environment. In production, an external CA should be used instead. This is because the CA secret key should generally be kept apart from the token signing secret keys so that a compromise of a node does not lead to an attacker being able to generate valid signed Keystone tokens. This is a low probability attack vector, as compromise of a Keystone service machine's filesystem security almost certainly means the attacker will be able to gain direct access to the token backend. When using the ``keystone-manage pki_setup`` to generate the certificates, the following configuration options in the ``[signing]`` section are used: * ``ca_key`` - Default is ``/etc/keystone/ssl/private/cakey.pem`` * ``key_size`` - Default is ``2048`` * ``valid_days`` - Default is ``3650`` If ``keystone-manage pki_setup`` is not used then these options don't need to be set. Encryption Keys for Fernet -------------------------- ``keystone-manage fernet_setup`` will attempt to create a key repository as configured in the ``[fernet_tokens]`` section of ``keystone.conf`` and bootstrap it with encryption keys. A single 256-bit key is actually composed of two smaller keys: a 128-bit key used for SHA256 HMAC signing and a 128-bit key used for AES encryption. See the `Fernet token `_ specification for more detail. ``keystone-manage fernet_rotate`` will rotate encryption keys through the following states: * **Staged key**: In a key rotation, a new key is introduced into the rotation in this state. Only one key is considered to be the *staged* key at any given time. This key will become the *primary* during the *next* key rotation. This key is only used to validate tokens and serves to avoid race conditions in multi-node deployments (all nodes should recognize all *primary* keys in the deployment at all times). In a multi-node Keystone deployment this would allow for the *staged* key to be replicated to all Keystone nodes before being promoted to *primary* on a single node. This prevents the case where a *primary* key is created on one Keystone node and tokens encryted/signed with that new *primary* are rejected on another Keystone node because the new *primary* doesn't exist there yet. * **Primary key**: In a key rotation, the old *staged* key is promoted to be the *primary*. Only one key is considered to be the *primary* key at any given time. This is the key used to generate new tokens. This key is also used to validate previously generated tokens. * **Secondary keys**: In a key rotation, the old *primary* key is demoted to be a *secondary* key. *Secondary* keys are only used to validate previously generated tokens. You can maintain any number of *secondary* keys, up to ``[fernet_tokens] max_active_keys`` (where "active" refers to the sum of all recognized keys in any state: *staged*, *primary* or *secondary*). When ``max_active_keys`` is exceeded during a key rotation, the oldest keys are discarded. When a new primary key is created, all new tokens will be encrypted using the new primary key. The old primary key is demoted to a secondary key, which can still be used for validating tokens. Excess secondary keys (beyond ``[fernet_tokens] max_active_keys``) are revoked. Revoked keys are permanently deleted. Rotating keys too frequently, or with ``[fernet_tokens] max_active_keys`` set too low, will cause tokens to become invalid prior to their expiration. Service Catalog --------------- Keystone provides two configuration options for your service catalog. SQL-based Service Catalog (``sql.Catalog``) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A dynamic database-backed driver fully supporting persistent configuration. ``keystone.conf`` example: .. code-block:: ini [catalog] driver = keystone.catalog.backends.sql.Catalog .. NOTE:: A `template_file` does not need to be defined for the sql.Catalog driver. To build your service catalog using this driver, see the built-in help: .. code-block:: bash $ openstack --help $ openstack help service create $ openstack help endpoint create You can also refer to `an example in Keystone (tools/sample_data.sh) `_. File-based Service Catalog (``templated.Catalog``) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The templated catalog is an in-memory backend initialized from a read-only ``template_file``. Choose this option only if you know that your service catalog will not change very much over time. .. NOTE:: Attempting to change your service catalog against this driver will result in ``HTTP 501 Not Implemented`` errors. This is the expected behavior. If you want to use these commands, you must instead use the SQL-based Service Catalog driver. ``keystone.conf`` example: .. code-block:: ini [catalog] driver = keystone.catalog.backends.templated.Catalog template_file = /opt/stack/keystone/etc/default_catalog.templates The value of ``template_file`` is expected to be an absolute path to your service catalog configuration. An example ``template_file`` is included in Keystone, however you should create your own to reflect your deployment. Another such example is `available in devstack (files/default_catalog.templates) `_. Logging ------- Logging is configured externally to the rest of Keystone. Configure the path to your logging configuration file using the ``[DEFAULT] log_config`` option of ``keystone.conf``. If you wish to route all your logging through syslog, set the ``[DEFAULT] use_syslog`` option. A sample ``log_config`` file is included with the project at ``etc/logging.conf.sample``. Like other OpenStack projects, Keystone uses the `Python logging module`, which includes extensive configuration options for choosing the output levels and formats. .. _Paste: http://pythonpaste.org/ .. _`Python logging module`: http://docs.python.org/library/logging.html SSL --- Keystone may be configured to support SSL and 2-way SSL out-of-the-box. The X509 certificates used by Keystone can be generated by ``keystone-manage`` or obtained externally and configured for use with Keystone as described in this section. Here is the description of each of them and their purpose: .. WARNING:: The SSL configuration options available to the eventlet server (``keystone-all``) described here are severely limited. A secure deployment should have Keystone running in a web server (such as Apache HTTPd), or behind an SSL terminator. When running Keystone in a web server or behind an SSL terminator the options described in this section have no effect and SSL is configured in the web server or SSL terminator. Types of certificates ^^^^^^^^^^^^^^^^^^^^^ * ``cacert.pem``: Certificate Authority chain to validate against. * ``ssl_cert.pem``: Public certificate for Keystone server. * ``middleware.pem``: Public and private certificate for Keystone middleware/client. * ``cakey.pem``: Private key for the CA. * ``ssl_key.pem``: Private key for the Keystone server. Note that you may choose whatever names you want for these certificates, or combine the public/private keys in the same file if you wish. These certificates are just provided as an example. Configuration ^^^^^^^^^^^^^ To enable SSL modify the ``etc/keystone.conf`` file under the ``[ssl]`` and ``[eventlet_server_ssl]`` sections. The following is an SSL configuration example using the included sample certificates: .. code-block:: ini [eventlet_server_ssl] enable = True certfile = keyfile = ca_certs = cert_required = False [ssl] ca_key = key_size = 1024 valid_days=3650 cert_subject=/C=US/ST=Unset/L=Unset/O=Unset/CN=localhost * ``enable``: True enables SSL. Defaults to False. * ``certfile``: Path to Keystone public certificate file. * ``keyfile``: Path to Keystone private certificate file. If the private key is included in the certfile, the keyfile may be omitted. * ``ca_certs``: Path to CA trust chain. * ``cert_required``: Requires client certificate. Defaults to False. When generating SSL certificates the following values are read * ``key_size``: Key size to create. Defaults to 1024. * ``valid_days``: How long the certificate is valid for. Defaults to 3650 (10 years). * ``ca_key``: The private key for the CA. Defaults to ``/etc/keystone/ssl/certs/cakey.pem``. * ``cert_subject``: The subject to set in the certificate. Defaults to ``/C=US/ST=Unset/L=Unset/O=Unset/CN=localhost``. When setting the subject it is important to set CN to be the address of the server so client validation will succeed. This generally means having the subject be at least ``/CN=`` Generating SSL certificates ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Certificates for encrypted HTTP communication can be generated by: .. code-block:: bash $ keystone-manage ssl_setup This will create a private key, a public key and a certificate that will be used to encrypt communications with keystone. In the event that a Certificate Authority is not given a testing one will be created. It is likely in a production environment that these certificates will be created and provided externally. Note that ``ssl_setup`` is a development tool and is only recommended for developments environment. We do not recommend using ``ssl_setup`` for production environments. User CRUD extension for the V2.0 API ------------------------------------ .. NOTE:: The core V3 API includes user operations so no extension needs to be enabled for the V3 API. For the V2.0 API, Keystone provides a user CRUD filter that can be added to the public_api pipeline. This user crud filter allows users to use a HTTP PATCH to change their own password. To enable this extension you should define a user_crud_extension filter, insert it after the ``*_body`` middleware and before the ``public_service`` app in the public_api WSGI pipeline in ``keystone-paste.ini`` e.g.: .. code-block:: ini [filter:user_crud_extension] paste.filter_factory = keystone.contrib.user_crud:CrudExtension.factory [pipeline:public_api] pipeline = url_normalize token_auth admin_token_auth json_body debug ec2_extension user_crud_extension public_service Each user can then change their own password with a HTTP PATCH : .. code-block:: bash $ curl -X PATCH http://localhost:5000/v2.0/OS-KSCRUD/users/ -H "Content-type: application/json" \ -H "X_Auth_Token: " -d '{"user": {"password": "ABCD", "original_password": "DCBA"}}' In addition to changing their password all of the user's current tokens will be revoked. Inherited Role Assignment Extension ----------------------------------- Keystone provides an optional extension that adds the capability to assign roles on a project or domain that, rather than affect the project or domain itself, are instead inherited to the project subtree or to all projects owned by that domain. This extension is disabled by default, but can be enabled by including the following in ``keystone.conf``: .. code-block:: ini [os_inherit] enabled = True Token Binding ------------- Token binding refers to the practice of embedding information from external authentication providers (like a company's Kerberos server) inside the token such that a client may enforce that the token only be used in conjunction with that specified authentication. This is an additional security mechanism as it means that if a token is stolen it will not be usable without also providing the external authentication. To activate token binding you must specify the types of authentication that token binding should be used for in ``keystone.conf`` e.g.: .. code-block:: ini [token] bind = kerberos Currently only ``kerberos`` is supported. To enforce checking of token binding the ``enforce_token_bind`` parameter should be set to one of the following modes: * ``disabled`` disable token bind checking * ``permissive`` enable bind checking, if a token is bound to a mechanism that is unknown to the server then ignore it. This is the default. * ``strict`` enable bind checking, if a token is bound to a mechanism that is unknown to the server then this token should be rejected. * ``required`` enable bind checking and require that at least 1 bind mechanism is used for tokens. * named enable bind checking and require that the specified authentication mechanism is used. e.g.: .. code-block:: ini [token] enforce_token_bind = kerberos *Do not* set ``enforce_token_bind = named`` as there is not an authentication mechanism called ``named``. Limiting the number of entities returned in a collection -------------------------------------------------------- Keystone provides a method of setting a limit to the number of entities returned in a collection, which is useful to prevent overly long response times for list queries that have not specified a sufficiently narrow filter. This limit can be set globally by setting ``list_limit`` in the default section of ``keystone.conf``, with no limit set by default. Individual driver sections may override this global value with a specific limit, for example: .. code-block:: ini [resource] list_limit = 100 If a response to ``list_{entity}`` call has been truncated, then the response status code will still be 200 (OK), but the ``truncated`` attribute in the collection will be set to ``true``. Sample Configuration Files -------------------------- The ``etc/`` folder distributed with Keystone contains example configuration files for each Server application. * ``etc/keystone.conf.sample`` * ``etc/keystone-paste.ini`` * ``etc/logging.conf.sample`` * ``etc/default_catalog.templates`` .. _`API protection with RBAC`: Keystone API protection with Role Based Access Control (RBAC) ============================================================= Like most OpenStack projects, Keystone supports the protection of its APIs by defining policy rules based on an RBAC approach. These are stored in a JSON policy file, the name and location of which is set in the main Keystone configuration file. Each Keystone v3 API has a line in the policy file which dictates what level of protection is applied to it, where each line is of the form:: : or where: ```` can contain ```` or ```` ```` is a set of identifiers that must match between the token provided by the caller of the API and the parameters or target entities of the API call in question. For example: .. code-block:: javascript "identity:create_user": "role:admin and domain_id:%(user.domain_id)s" Indicates that to create a user you must have the admin role in your token and in addition the domain_id in your token (which implies this must be a domain scoped token) must match the domain_id in the user object you are trying to create. In other words, you must have the admin role on the domain in which you are creating the user, and the token you are using must be scoped to that domain. Each component of a match statement is of the form:: : or The following attributes are available * Attributes from token: user_id, the domain_id or project_id depending on the scope, and the list of roles you have within that scope * Attributes related to API call: Any parameters that are passed into the API call are available, along with any filters specified in the query string. Attributes of objects passed can be referenced using an object.attribute syntax (e.g. user.domain_id). The target objects of an API are also available using a target.object.attribute syntax. For instance: .. code-block:: javascript "identity:delete_user": "role:admin and domain_id:%(target.user.domain_id)s" would ensure that the user object that is being deleted is in the same domain as the token provided. Every target object has an `id` and a `name` available as `target..id` and `target..name`. Other attributes are retrieved from the database and vary between object types. Moreover, some database fields are filtered out (e.g. user passwords). List of object attributes: * role: * target.role.id * target.role.name * user: * target.user.default_project_id * target.user.description * target.user.domain_id * target.user.enabled * target.user.id * target.user.name * group: * target.group.description * target.group.domain_id * target.group.id * target.group.name * domain: * target.domain.enabled * target.domain.id * target.domain.name * project: * target.project.description * target.project.domain_id * target.project.enabled * target.project.id * target.project.name The default policy.json file supplied provides a somewhat basic example of API protection, and does not assume any particular use of domains. For multi-domain configuration installations where, for example, a cloud provider wishes to allow administration of the contents of a domain to be delegated, it is recommended that the supplied policy.v3cloudsample.json is used as a basis for creating a suitable production policy file. This example policy file also shows the use of an admin_domain to allow a cloud provider to enable cloud administrators to have wider access across the APIs. A clean installation would need to perhaps start with the standard policy file, to allow creation of the admin_domain with the first users within it. The domain_id of the admin domain would then be obtained and could be pasted into a modified version of policy.v3cloudsample.json which could then be enabled as the main policy file. .. _`prepare your deployment`: Preparing your deployment ========================= Step 1: Configure keystone.conf ------------------------------- Ensure that your ``keystone.conf`` is configured to use a SQL driver: .. code-block:: ini [identity] driver = keystone.identity.backends.sql.Identity You may also want to configure your ``[database]`` settings to better reflect your environment: .. code-block:: ini [database] connection = sqlite:///keystone.db idle_timeout = 200 .. NOTE:: It is important that the database that you specify be different from the one containing your existing install. Step 2: Sync your new, empty database ------------------------------------- You should now be ready to initialize your new database without error, using: .. code-block:: bash $ keystone-manage db_sync To test this, you should now be able to start ``keystone-all`` and use the OpenStack Client to list your projects (which should successfully return an empty list from your new database): .. code-block:: bash $ openstack --os-token ADMIN --os-url http://127.0.0.1:35357/v2.0/ project list .. NOTE:: We're providing the default OS_TOKEN and OS_URL values from ``keystone.conf`` to connect to the Keystone service. If you changed those values, or deployed Keystone to a different endpoint, you will need to change the provided command accordingly. Initializing Keystone ===================== ``keystone-manage`` is designed to execute commands that cannot be administered through the normal REST API. At the moment, the following calls are supported: * ``db_sync``: Sync the database. * ``db_version``: Print the current migration version of the database. * ``mapping_purge``: Purge the identity mapping table. * ``pki_setup``: Initialize the certificates used to sign tokens. * ``saml_idp_metadata``: Generate identity provider metadata. * ``ssl_setup``: Generate certificates for SSL. * ``token_flush``: Purge expired tokens Invoking ``keystone-manage`` by itself will give you additional usage information. The private key used for token signing can only be read by its owner. This prevents unauthorized users from spuriously signing tokens. ``keystone-manage pki_setup`` Should be run as the same system user that will be running the Keystone service to ensure proper ownership for the private key file and the associated certificates. Adding Users, Projects, and Roles via Command Line Interfaces ============================================================= Keystone APIs are protected by the rules in the policy file. The default policy rules require admin credentials to administer ``users``, ``projects``, and ``roles``. See section `Keystone API protection with Role Based Access Control (RBAC)`_ for more details on policy files. The Keystone command line interface packaged in `python-keystoneclient`_ only supports the Identity v2.0 API. The OpenStack common command line interface packaged in `python-openstackclient`_ supports both v2.0 and v3 APIs. With both command line interfaces there are two ways to configure the client to use admin credentials, using either an existing token or password credentials. .. NOTE:: As of the Juno release, it is recommended to use ``python-openstackclient``, as it supports both v2.0 and v3 APIs. For the purpose of backwards compatibility, the CLI packaged in ``python-keystoneclient`` is not being removed. .. _`python-openstackclient`: http://docs.openstack.org/developer/python-openstackclient/ .. _`python-keystoneclient`: http://docs.openstack.org/developer/python-keystoneclient/ Authenticating with a Token --------------------------- .. NOTE:: If your Keystone deployment is brand new, you will need to use this authentication method, along with your ``[DEFAULT] admin_token``. To authenticate with Keystone using a token and ``python-openstackclient``, set the following flags. * ``--os-url OS_URL``: Keystone endpoint the user communicates with * ``--os-token OS_TOKEN``: User's service token To administer a Keystone endpoint, your token should be either belong to a user with the ``admin`` role, or, if you haven't created one yet, should be equal to the value defined by ``[DEFAULT] admin_token`` in your ``keystone.conf``. You can also set these variables in your environment so that they do not need to be passed as arguments each time: .. code-block:: bash $ export OS_URL=http://localhost:35357/v2.0 $ export OS_TOKEN=ADMIN Instead of ``python-openstackclient``, if using ``python-keystoneclient``, set the following: * ``--os-endpoint OS_SERVICE_ENDPOINT``: equivalent to ``--os-url OS_URL`` * ``--os-service-token OS_SERVICE_TOKEN``: equivalent to ``--os-token OS_TOKEN`` Authenticating with a Password ------------------------------ To authenticate with Keystone using a password and ``python-openstackclient``, set the following flags, note that the following user referenced below should be granted the ``admin`` role. * ``--os-username OS_USERNAME``: Name of your user * ``--os-password OS_PASSWORD``: Password for your user * ``--os-project-name OS_PROJECT_NAME``: Name of your project * ``--os-auth-url OS_AUTH_URL``: URL of the Keystone authentication server You can also set these variables in your environment so that they do not need to be passed as arguments each time: .. code-block:: bash $ export OS_USERNAME=my_username $ export OS_PASSWORD=my_password $ export OS_PROJECT_NAME=my_project $ export OS_AUTH_URL=http://localhost:35357/v2.0 If using ``python-keystoneclient``, set the following instead: * ``--os-tenant-name OS_TENANT_NAME``: equivalent to ``--os-project-name OS_PROJECT_NAME`` Example usage ------------- ``python-openstackclient`` is set up to expect commands in the general form of: .. code-block:: bash $ openstack [] [] [] For example, the commands ``user list`` and ``project create`` can be invoked as follows: .. code-block:: bash # Using token authentication, with environment variables $ export OS_URL=http://127.0.0.1:35357/v2.0/ $ export OS_TOKEN=secrete_token $ openstack user list $ openstack project create demo # Using token authentication, with flags $ openstack --os-token=secrete --os-url=http://127.0.0.1:35357/v2.0/ user list $ openstack --os-token=secrete --os-url=http://127.0.0.1:35357/v2.0/ project create demo # Using password authentication, with environment variables $ export OS_USERNAME=admin $ export OS_PASSWORD=secrete $ export OS_PROJECT_NAME=admin $ export OS_AUTH_URL=http://localhost:35357/v2.0 $ openstack user list $ openstack project create demo # Using password authentication, with flags $ openstack --os-username=admin --os-password=secrete --os-project-name=admin --os-auth-url=http://localhost:35357/v2.0 user list $ openstack --os-username=admin --os-password=secrete --os-project-name=admin --os-auth-url=http://localhost:35357/v2.0 project create demo For additional examples using ``python-keystoneclient`` refer to `python-keystoneclient examples`_, likewise, for additional examples using ``python-openstackclient``, refer to `python-openstackclient examples`_. .. _`python-keystoneclient examples`: cli_examples.html#using-python-keystoneclient-v2-0 .. _`python-openstackclient examples`: cli_examples.html#using-python-openstackclient-v3 Removing Expired Tokens ======================= In the SQL backend expired tokens are not automatically removed. These tokens can be removed with: .. code-block:: bash $ keystone-manage token_flush The memcache backend automatically discards expired tokens and so flushing is unnecessary and if attempted will fail with a NotImplemented error. Configuring the LDAP Identity Provider ====================================== As an alternative to the SQL Database backing store, Keystone can use a directory server to provide the Identity service. An example Schema for OpenStack would look like this:: dn: dc=openstack,dc=org dc: openstack objectClass: dcObject objectClass: organizationalUnit ou: openstack dn: ou=Projects,dc=openstack,dc=org objectClass: top objectClass: organizationalUnit ou: groups dn: ou=Users,dc=openstack,dc=org objectClass: top objectClass: organizationalUnit ou: users dn: ou=Roles,dc=openstack,dc=org objectClass: top objectClass: organizationalUnit ou: roles The corresponding entries in the Keystone configuration file are: .. code-block:: ini [ldap] url = ldap://localhost user = dc=Manager,dc=openstack,dc=org password = badpassword suffix = dc=openstack,dc=org use_dumb_member = False allow_subtree_delete = False user_tree_dn = ou=Users,dc=openstack,dc=org user_objectclass = inetOrgPerson project_tree_dn = ou=Projects,dc=openstack,dc=org project_objectclass = groupOfNames role_tree_dn = ou=Roles,dc=openstack,dc=org role_objectclass = organizationalRole The default object classes and attributes are intentionally simplistic. They reflect the common standard objects according to the LDAP RFCs. However, in a live deployment, the correct attributes can be overridden to support a preexisting, more complex schema. For example, in the user object, the objectClass posixAccount from RFC2307 is very common. If this is the underlying objectclass, then the *uid* field should probably be *uidNumber* and *username* field either *uid* or *cn*. To change these two fields, the corresponding entries in the Keystone configuration file are: .. code-block:: ini [ldap] user_id_attribute = uidNumber user_name_attribute = cn There is a set of allowed actions per object type that you can modify depending on your specific deployment. For example, the users are managed by another tool and you have only read access, in such case the configuration is: .. code-block:: ini [ldap] user_allow_create = False user_allow_update = False user_allow_delete = False project_allow_create = True project_allow_update = True project_allow_delete = True role_allow_create = True role_allow_update = True role_allow_delete = True There are some configuration options for filtering users, tenants and roles, if the backend is providing too much output, in such case the configuration will look like: .. code-block:: ini [ldap] user_filter = (memberof=CN=openstack-users,OU=workgroups,DC=openstack,DC=org) project_filter = role_filter = In case that the directory server does not have an attribute enabled of type boolean for the user, there is several configuration parameters that can be used to extract the value from an integer attribute like in Active Directory: .. code-block:: ini [ldap] user_enabled_attribute = userAccountControl user_enabled_mask = 2 user_enabled_default = 512 In this case the attribute is an integer and the enabled attribute is listed in bit 1, so the if the mask configured *user_enabled_mask* is different from 0, it gets the value from the field *user_enabled_attribute* and it makes an ADD operation with the value indicated on *user_enabled_mask* and if the value matches the mask then the account is disabled. It also saves the value without mask to the user identity in the attribute *enabled_nomask*. This is needed in order to set it back in case that we need to change it to enable/disable a user because it contains more information than the status like password expiration. Last setting *user_enabled_mask* is needed in order to create a default value on the integer attribute (512 = NORMAL ACCOUNT on AD) In case of Active Directory the classes and attributes could not match the specified classes in the LDAP module so you can configure them like: .. code-block:: ini [ldap] user_objectclass = person user_id_attribute = cn user_name_attribute = cn user_mail_attribute = mail user_enabled_attribute = userAccountControl user_enabled_mask = 2 user_enabled_default = 512 user_attribute_ignore = tenant_id,tenants project_objectclass = groupOfNames project_id_attribute = cn project_member_attribute = member project_name_attribute = ou project_desc_attribute = description project_enabled_attribute = extensionName project_attribute_ignore = role_objectclass = organizationalRole role_id_attribute = cn role_name_attribute = ou role_member_attribute = roleOccupant role_attribute_ignore = Debugging LDAP -------------- For additional information on LDAP connections, performance (such as slow response time), or field mappings, setting ``debug_level`` in the [ldap] section is used to enable debugging: .. code-block:: ini debug_level = 4095 This setting in turn sets OPT_DEBUG_LEVEL in the underlying python library. This field is a bit mask (integer), and the possible flags are documented in the OpenLDAP manpages. Commonly used values include 255 and 4095, with 4095 being more verbose. .. WARNING:: Enabling ``debug_level`` will negatively impact performance. Enabled Emulation ----------------- Some directory servers do not provide any enabled attribute. For these servers, the ``user_enabled_emulation`` and ``project_enabled_emulation`` attributes have been created. They are enabled by setting their respective flags to True. Then the attributes ``user_enabled_emulation_dn`` and ``project_enabled_emulation_dn`` may be set to specify how the enabled users and projects (tenants) are selected. These attributes work by using a ``groupOfNames`` and adding whichever users or projects (tenants) that you want enabled to the respective group. For example, this will mark any user who is a member of ``enabled_users`` as enabled: .. code-block:: ini [ldap] user_enabled_emulation = True user_enabled_emulation_dn = cn=enabled_users,cn=groups,dc=openstack,dc=org The default values for user and project (tenant) enabled emulation DN is ``cn=enabled_users,$user_tree_dn`` and ``cn=enabled_tenants,$project_tree_dn`` respectively. Secure Connection ----------------- If you are using a directory server to provide the Identity service, it is strongly recommended that you utilize a secure connection from Keystone to the directory server. In addition to supporting LDAP, Keystone also provides Transport Layer Security (TLS) support. There are some basic configuration options for enabling TLS, identifying a single file or directory that contains certificates for all the Certificate Authorities that the Keystone LDAP client will recognize, and declaring what checks the client should perform on server certificates. This functionality can easily be configured as follows: .. code-block:: ini [ldap] use_tls = True tls_cacertfile = /etc/keystone/ssl/certs/cacert.pem tls_cacertdir = /etc/keystone/ssl/certs/ tls_req_cert = demand A few points worth mentioning regarding the above options. If both tls_cacertfile and tls_cacertdir are set then tls_cacertfile will be used and tls_cacertdir is ignored. Furthermore, valid options for tls_req_cert are demand, never, and allow. These correspond to the standard options permitted by the TLS_REQCERT TLS option. Read Only LDAP -------------- Many environments typically have user and group information in directories that are accessible by LDAP. This information is for read-only use in a wide array of applications. Prior to the Havana release, we could not deploy Keystone with read-only directories as backends because Keystone also needed to store information such as projects, roles, domains and role assignments into the directories in conjunction with reading user and group information. Keystone now provides an option whereby these read-only directories can be easily integrated as it now enables its identity entities (which comprises users, groups, and group memberships) to be served out of directories while resource (which comprises projects and domains), assignment and role entities are to be served from different Keystone backends (i.e. SQL). To enable this option, you must have the following ``keystone.conf`` options set: .. code-block:: ini [identity] driver = keystone.identity.backends.ldap.Identity [resource] driver = keystone.resource.backends.sql.Resource [assignment] driver = keystone.assignment.backends.sql.Assignment [role] driver = keystone.assignment.role_backends.sql.Role With the above configuration, Keystone will only lookup identity related information such users, groups, and group membership from the directory, while resources, roles and assignment related information will be provided by the SQL backend. Also note that if there is an LDAP Identity, and no resource, assignment or role backend is specified, they will default to LDAP. Although this may seem counterintuitive, it is provided for backwards compatibility. Nonetheless, the explicit option will always override the implicit option, so specifying the options as shown above will always be correct. Finally, it is also worth noting that whether or not the LDAP accessible directory is to be considered read only is still configured as described in a previous section above by setting values such as the following in the ``[ldap]`` configuration section: .. code-block:: ini [ldap] user_allow_create = False user_allow_update = False user_allow_delete = False .. NOTE:: While having identity related infomration backed by LDAP while other information is backed by SQL is a supported configuration, as shown above; the opposite is not true. If either resource or assignment drivers are configured for LDAP, then Identity must also be configured for LDAP. Connection Pooling ------------------ Various LDAP backends in Keystone use a common LDAP module to interact with LDAP data. By default, a new connection is established for LDAP operations. This can become highly expensive when TLS support is enabled which is a likely configuraton in enterprise setup. Re-using of connectors from a connection pool drastically reduces overhead of initiating a new connection for every LDAP operation. Keystone now provides connection pool support via configuration. This change will keep LDAP connectors alive and re-use for subsequent LDAP operations. A connection lifespan is going to be configurable with other pooling specific attributes. The change is made in LDAP handler layer logic which is primarily responsible for LDAP connection and shared common operations. In LDAP identity driver, Keystone authenticates end user by LDAP bind with user DN and provided password. These kind of auth binds can fill up the pool pretty quickly so a separate pool is provided for those end user auth bind calls. If a deployment does not want to use pool for those binds, then it can disable pooling selectively by ``use_auth_pool`` as false. If a deployment wants to use pool for those auth binds, then ``use_auth_pool`` needs to be true. For auth pool, a different pool size (``auth_pool_size``) and connection lifetime (``auth_pool_connection_lifetime``) can be specified. With enabled auth pool, its connection lifetime should be kept short so that pool frequently re-binds the connection with provided creds and works reliably in end user password change case. When ``use_pool`` is false (disabled), then auth pool configuration is also not used. Connection pool configuration is added in ``[ldap]`` configuration section: .. code-block:: ini [ldap] # Enable LDAP connection pooling. (boolean value) use_pool=false # Connection pool size. (integer value) pool_size=10 # Maximum count of reconnect trials. (integer value) pool_retry_max=3 # Time span in seconds to wait between two reconnect trials. # (floating point value) pool_retry_delay=0.1 # Connector timeout in seconds. Value -1 indicates indefinite wait for # response. (integer value) pool_connection_timeout=-1 # Connection lifetime in seconds. (integer value) pool_connection_lifetime=600 # Enable LDAP connection pooling for end user authentication. If use_pool # is disabled, then this setting is meaningless and is not used at all. # (boolean value) use_auth_pool=false # End user auth connection pool size. (integer value) auth_pool_size=100 # End user auth connection lifetime in seconds. (integer value) auth_pool_connection_lifetime=60