#!/bin/bash # Copyright 2015-2016 AT&T Intellectual Property, Inc # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # What this is: A basic test to validate an OPNFV install. Creates an image, # using the OpenWRT project and a private network over which OpenWRT will # allocate addresses etc. # # Status: this is a work in progress, under test. Automated ping test to the # internet and between VMs has not yet been implemented. # # Prequisites: # python-openstackclient >=3.2.0 # # How to use: # $ bash ~/git/copper/tests/adhoc/OpenWRT.sh # After test, cleanup with # $ bash ~/git/copper/tests/adhoc/OpenWRT-clean.sh trap 'fail' ERR pass() { echo "$0: Hooray!" set +x #echo off exit 0 } # Use this to trigger fail() at the right places # if [ "$RESULT" == "Test Failed!" ]; then fail; fi fail() { echo "$0: Test Failed!" set +x exit 1 } # Find external network if any, and details function get_external_net () { network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}')) for id in ${network_ids[@]}; do [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && ext_net_id=${id} done if [[ $ext_net_id ]]; then EXTERNAL_NETWORK_NAME=$(openstack network show $ext_net_id | awk "/ name / { print \$4 }") EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") else echo "$0: External network not found" echo "$0: Create external network" neutron net-create public --router:external EXTERNAL_NETWORK_NAME="public" echo "$0: Create external subnet" neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") fi } wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh source ~/setenv.sh echo "$0: create OpenWRT image" image=$(openstack image list | awk "/ OpenWRT / { print \$2 }") if [ -z $image ]; then glance --os-image-api-version 1 image-create --name OpenWRT --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare fi get_external_net echo "$0: Create floating IP for external subnet" FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) # Save ID to pass to cleanup script echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/OpenWRT_VARS.sh INTERNAL_NET_ID=$(neutron net-list | awk "/ internal / { print \$2 }") if [[ -z $INTERNAL_NET_ID ]]; then echo "$0: Create internal network" neutron net-create internal echo "$0: Create internal subnet" neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 fi if [[ -z $(neutron router-list | awk "/ public_router / { print \$2 }") ]]; then echo "$0: Create public_router" neutron router-create public_router echo "$0: Create public_router gateway" neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME echo "$0: Add router interface for internal network" neutron router-interface-add public_router subnet=internal fi echo "$0: Create OpenWRT network" neutron net-create OpenWRT wrt_net_id=$(neutron net-list | awk "/ OpenWRT / { print \$2 }") echo "$0: Create OpenWRT subnet" neutron subnet-create OpenWRT 192.168.1.0/24 --disable-dhcp --name OpenWRT --gateway 192.168.1.1 echo "$0: Create OpenWRT security group" neutron security-group-create OpenWRT echo "$0: Add rules to OpenWRT security group" neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 OpenWRT neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=80 --port-range-max=80 OpenWRT neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 OpenWRT neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 OpenWRT neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 OpenWRT echo "$0: Create Nova key pair" ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.1.1 nova keypair-add OpenWRT > /tmp/OpenWRT chmod 600 /tmp/OpenWRT echo "$0: Create OpenWRT port for LAN" LAN_PORT_ID=$(neutron port-create OpenWRT --fixed-ip ip_address=192.168.1.1 | awk "/ id / { print \$4 }") echo "$0: Create OpenWRT port for WAN" WAN_PORT_ID=$(neutron port-create internal | awk "/ id / { print \$4 }") # The following does not work with a single-NIC compute node # EXT_PORT_ID=$(neutron port-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") echo "$0: Boot OpenWRT with internal net port" openstack server create --flavor m1.tiny --image OpenWRT --nic port-id=$WAN_PORT_ID --security-group OpenWRT --security-group default --key-name OpenWRT OpenWRT echo "$0: Add OpenWRT security group (should have been done thru the server create command but...)" openstack server add security group OpenWRT OpenWRT # failed with: either net-id or port-id should be specified but not both # openstack server create --flavor m1.tiny --image OpenWRT --nic net-id=$wrt_net_id,v4-fixed-ip=192.168.1.1 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --key-name OpenWRT OpenWRT # openstack server create --flavor m1.tiny --image OpenWRT --nic v4-fixed-ip=192.168.1.1 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --key-name OpenWRT OpenWRT echo "$0: Wait for OpenWRT to go ACTIVE" COUNTER=12 RESULT="Test Failed!" until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do status=$(openstack server show OpenWRT | awk "/ status / { print \$4 }") if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi let COUNTER-=1 sleep 5 done if [ "$RESULT" == "Test Failed!" ]; then fail; fi echo "$0: Associate floating IP to OpenWRT external port" neutron floatingip-associate $FLOATING_IP_ID $WAN_PORT_ID echo "$0: Attach eth1 to OpenWRT internal port" nova interface-attach --port-id $LAN_PORT_ID OpenWRT echo "$0: Boot cirros1 with internal net port" openstack server create --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$INTERNAL_NET_ID --security-group OpenWRT --security-group default --key-name OpenWRT cirros1 echo "$0: Wait for cirros1 to go ACTIVE" COUNTER=12 RESULT="Test Failed!" until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do status=$(openstack server show cirros1 | awk "/ status / { print \$4 }") if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi let COUNTER-=1 sleep 5 done if [ "$RESULT" == "Test Failed!" ]; then fail; fi echo "$0: Create floating IP for external subnet" FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) echo "$0: Associate floating IP to cirros1 internal port" nova floating-ip-associate cirros1 $FLOATING_IP echo "$0: Create cirros1 port for OpenWRT net" INT_PORT_ID=$(neutron port-create OpenWRT --fixed-ip ip_address=192.168.1.2 | awk "/ id / { print \$4 }") echo "$0: Attach eth1 to cirros1 internal port" nova interface-attach --port-id $INT_PORT_ID cirros1 pass