#!/bin/bash JOB_TYPE=$1 QEMURPM_VERSION=$2 HOME='/home/jenkins' VSPERF="${HOME}/vswitchperf" LOG_FILE_PREFIX="/tmp/vsperf_build" VSPERF_BIN='./vsperf' DATE=$(date -u +"%Y-%m-%d_%H-%M-%S") VSPERFENV_DIR="$HOME/vsperfenv" TEST_REPORT_LOG_DIR="/tmp/packet_fwd_logs" EXIT=0 EXIT_TC_FAILED=1 # DAILY - run selected TCs for defined packet sizes TESTCASES_DAILY='phy2phy_tput phy2phy_tput_mod_vlan pvp_tput' TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)' TESTCASES_SRIOV='pvp_tput' TESTPARAM_SRIOV='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)' #mounting shared directory for collecting ixia test results. shared_dir=$(sudo mount | grep ixia_results) if [ -z "$shared_dir" ]; then echo "mounting shared directory for results" sudo mount -t cifs //10.10.100.6/ixia_results/kvm4nfv_ci /mnt/ixia_results/kvm4nfv_ci -o password=kvm4nfv! -o username=kvm4nfv,file_mode=0777,dir_mode=0777,nounix else echo "shared directory is already mounted for results" fi # check if user config file exists if not then we will use default settings if [ -f $HOME/vsperf.conf ] ; then CONF_FILE="--conf-file ${HOME}/vsperf.conf" else echo "configuration file not found on the test node" echo "Using configuration file available in kvmfornfv repo" CONF_FILE="--conf-file /root/workspace/scripts/vsperf.conf" fi # check if sriov config file exists if not then we will use default settings if [ -f $HOME/vsperf.conf.sriov ] ; then CONF_FILE_SRIOV="--conf-file ${HOME}/vsperf.conf.sriov" else echo "SRIOV configuration file not found on the node" echo "Using SRIOV configuration file available in kvmfornfv repo" CONF_FILE="--conf-file /root/workspace/scripts/vsperf.conf.sriov" fi function install_vsperf() { echo "Installing vsperf....." ( cd $VSPERF/systems ; ./build_base_machine.sh ) } #Install kvmfornfv built qemu for launching guest vm. function install_qemu() { echo "removing existing qemu packages and installing kvmfornfv built qemu" ( cd /root/workspace/scripts ; ./host-install-qemu.sh ) } function print_results() { for i in $TESTCASES ; do RES_FILE=`ls -1 $1 | egrep "result_${i}_[0-9a-zA-Z\-]+.csv"` if [ "x$RES_FILE" != "x" -a -e "${1}/${RES_FILE}" ]; then if grep ^FAILED "${1}/${RES_FILE}" &> /dev/null ; then printf " %-70s %-6s\n" "result_${i}" "FAILED" EXIT=$EXIT_TC_FAILED else echo "--------------------------------------------------------------" printf " %-50s %-6s\n" "result_${i}" "OK" echo "--------------------------------------------------------------" fi else echo "------------------------------------------------------------------" printf " %-50s %-6s\n" "result_${i}" "FAILED" echo "------------------------------------------------------------------" EXIT=$EXIT_TC_FAILED fi done } function execute_vsperf() { # figure out list of TCs and execution parameters case $2 in "daily") TESTPARAM=$TESTPARAM_DAILY TESTCASES=$TESTCASES_DAILY ;; *) echo "No vsperf test cases implemented for this job type" ;; esac # execute testcases echo -e "\nExecution of VSPERF for $1" DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S") source "$VSPERFENV_DIR"/bin/activate case $1 in "SRIOV") # use SRIOV specific TCs and configuration TESTPARAM=$TESTPARAM_SRIOV TESTCASES=$TESTCASES_SRIOV # figure out log file name LOG_SUBDIR="SRIOV" LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log" echo " $VSPERF_BIN --vswitch none --vnf QemuPciPassthrough $CONF_FILE_SRIOV $TESTPARAM $TESTCASES &> $LOG_FILE" $VSPERF_BIN --vswitch none --vnf QemuPciPassthrough $CONF_FILE_SRIOV $TESTPARAM $TESTCASES &> $LOG_FILE ;; *) # figure out log file name LOG_SUBDIR="OvsDpdkVhost" LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log" echo " $VSPERF_BIN $OPNFVPOD --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE" echo "daily test cases started" cd $HOME/vswitchperf $VSPERF_BIN --list $VSPERF_BIN --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &>> $LOG_FILE ;; esac # evaluation of results echo -e "\nResults for $1" RES_DIR="/$(grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-)" if [[ "/" == "${RES_DIR}" ]] ; then echo "FAILURE: Results are not available." echo "-------------------------------------------------------------------" cat $LOG_FILE echo "-------------------------------------------------------------------" exit $EXIT_NO_RESULTS else print_results "${RES_DIR}" if [ $(($EXIT & $EXIT_TC_FAILED)) -gt 0 ] ; then echo "-------------------------------------------------------------------" cat $LOG_FILE echo "-------------------------------------------------------------------" fi fi # show detailed result figures for md_file in $(grep '\.md"$' $LOG_FILE | cut -d'"' -f2); do # TC resut file header echo -e "\n-------------------------------------------------------------------" echo -e " $md_file" echo -e "-------------------------------------------------------------------\n" # TC details sed -n '/^- Test ID/,/Bidirectional/{/Packet size/b;p;/Bidirectional/q};/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file # TC results sed -n '/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file | grep -v "Unknown" | cat -s done # copy logs into dedicated directory mkdir -p ${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR} [ -f "$LOG_FILE" ] && cp -a "${LOG_FILE}" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null [ -d "$RES_DIR" ] && cp -ar "$RES_DIR" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null } #Install vsperf and set up the environment install_vsperf #Install kvmfornfv built qemu rpm install_qemu # execute job based on passed parameter case $1 in "daily") echo "================" echo "VSPERF daily job" echo "================" execute_vsperf OVS_with_DPDK_and_vHost_User $1 execute_vsperf SRIOV $1 exit $EXIT ;; *) echo "test cases not implemented for this job type" esac exit $EXIT