From e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Fri, 28 Aug 2015 09:58:54 +0800 Subject: Add qemu 2.4.0 Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang --- qemu/roms/u-boot/scripts/.gitignore | 4 + qemu/roms/u-boot/scripts/Kbuild.include | 294 ++ qemu/roms/u-boot/scripts/Makefile | 16 + qemu/roms/u-boot/scripts/Makefile.build | 516 +++ qemu/roms/u-boot/scripts/Makefile.clean | 109 + qemu/roms/u-boot/scripts/Makefile.host | 170 + qemu/roms/u-boot/scripts/Makefile.lib | 381 +++ qemu/roms/u-boot/scripts/basic/.gitignore | 1 + qemu/roms/u-boot/scripts/basic/Makefile | 15 + qemu/roms/u-boot/scripts/basic/fixdep.c | 462 +++ qemu/roms/u-boot/scripts/binutils-version.sh | 20 + qemu/roms/u-boot/scripts/checkpatch.pl | 4573 ++++++++++++++++++++++++++ qemu/roms/u-boot/scripts/checkstack.pl | 171 + qemu/roms/u-boot/scripts/cleanpatch | 258 ++ qemu/roms/u-boot/scripts/docproc.c | 580 ++++ qemu/roms/u-boot/scripts/dtc-version.sh | 20 + qemu/roms/u-boot/scripts/gcc-stack-usage.sh | 18 + qemu/roms/u-boot/scripts/gcc-version.sh | 32 + qemu/roms/u-boot/scripts/kernel-doc | 2609 +++++++++++++++ qemu/roms/u-boot/scripts/ld-version.sh | 8 + qemu/roms/u-boot/scripts/mkmakefile | 59 + qemu/roms/u-boot/scripts/objdiff | 141 + qemu/roms/u-boot/scripts/setlocalversion | 177 + 23 files changed, 10634 insertions(+) create mode 100644 qemu/roms/u-boot/scripts/.gitignore create mode 100644 qemu/roms/u-boot/scripts/Kbuild.include create mode 100644 qemu/roms/u-boot/scripts/Makefile create mode 100644 qemu/roms/u-boot/scripts/Makefile.build create mode 100644 qemu/roms/u-boot/scripts/Makefile.clean create mode 100644 qemu/roms/u-boot/scripts/Makefile.host create mode 100644 qemu/roms/u-boot/scripts/Makefile.lib create mode 100644 qemu/roms/u-boot/scripts/basic/.gitignore create mode 100644 qemu/roms/u-boot/scripts/basic/Makefile create mode 100644 qemu/roms/u-boot/scripts/basic/fixdep.c create mode 100644 qemu/roms/u-boot/scripts/binutils-version.sh create mode 100755 qemu/roms/u-boot/scripts/checkpatch.pl create mode 100755 qemu/roms/u-boot/scripts/checkstack.pl create mode 100755 qemu/roms/u-boot/scripts/cleanpatch create mode 100644 qemu/roms/u-boot/scripts/docproc.c create mode 100644 qemu/roms/u-boot/scripts/dtc-version.sh create mode 100644 qemu/roms/u-boot/scripts/gcc-stack-usage.sh create mode 100644 qemu/roms/u-boot/scripts/gcc-version.sh create mode 100755 qemu/roms/u-boot/scripts/kernel-doc create mode 100755 qemu/roms/u-boot/scripts/ld-version.sh create mode 100644 qemu/roms/u-boot/scripts/mkmakefile create mode 100755 qemu/roms/u-boot/scripts/objdiff create mode 100755 qemu/roms/u-boot/scripts/setlocalversion (limited to 'qemu/roms/u-boot/scripts') diff --git a/qemu/roms/u-boot/scripts/.gitignore b/qemu/roms/u-boot/scripts/.gitignore new file mode 100644 index 000000000..82bc06ef9 --- /dev/null +++ b/qemu/roms/u-boot/scripts/.gitignore @@ -0,0 +1,4 @@ +# +# Generated files +# +docproc diff --git a/qemu/roms/u-boot/scripts/Kbuild.include b/qemu/roms/u-boot/scripts/Kbuild.include new file mode 100644 index 000000000..c664e39be --- /dev/null +++ b/qemu/roms/u-boot/scripts/Kbuild.include @@ -0,0 +1,294 @@ +#### +# kbuild: Generic definitions + +# Convenient variables +comma := , +quote := " +squote := ' +empty := +space := $(empty) $(empty) + +### +# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o +dot-target = $(dir $@).$(notdir $@) + +### +# The temporary file to save gcc -MD generated dependencies must not +# contain a comma +depfile = $(subst $(comma),_,$(dot-target).d) + +### +# filename of target with directory and extension stripped +basetarget = $(basename $(notdir $@)) + +### +# filename of first prerequisite with directory and extension stripped +baseprereq = $(basename $(notdir $<)) + +### +# Escape single quote for use in echo statements +escsq = $(subst $(squote),'\$(squote)',$1) + +### +# Easy method for doing a status message + kecho := : + quiet_kecho := echo +silent_kecho := : +kecho := $($(quiet)kecho) + +### +# filechk is used to check if the content of a generated file is updated. +# Sample usage: +# define filechk_sample +# echo $KERNELRELEASE +# endef +# version.h : Makefile +# $(call filechk,sample) +# The rule defined shall write to stdout the content of the new file. +# The existing file will be compared with the new one. +# - If no file exist it is created +# - If the content differ the new file is used +# - If they are equal no change, and no timestamp update +# - stdin is piped in from the first prerequisite ($<) so one has +# to specify a valid file as first prerequisite (often the kbuild file) +define filechk + $(Q)set -e; \ + $(kecho) ' CHK $@'; \ + mkdir -p $(dir $@); \ + $(filechk_$(1)) < $< > $@.tmp; \ + if [ -r $@ ] && cmp -s $@ $@.tmp; then \ + rm -f $@.tmp; \ + else \ + $(kecho) ' UPD $@'; \ + mv -f $@.tmp $@; \ + fi +endef + +###### +# gcc support functions +# See documentation in Documentation/kbuild/makefiles.txt + +# cc-cross-prefix +# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-) +# Return first prefix where a prefix$(CC) is found in PATH. +# If no $(CC) found in PATH with listed prefixes return nothing +cc-cross-prefix = \ + $(word 1, $(foreach c,$(1), \ + $(shell set -e; \ + if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \ + echo $(c); \ + fi))) + +# output directory for tests below +TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/) + +# try-run +# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) +# Exit code chooses option. "$$TMP" is can be used as temporary file and +# is automatically cleaned up. +# modifed for U-Boot: prevent cc-option from leaving .*.su files +try-run = $(shell set -e; \ + TMP="$(TMPOUT).$$$$.tmp"; \ + TMPO="$(TMPOUT).$$$$.o"; \ + TMPSU="$(TMPOUT).$$$$.su"; \ + if ($(1)) >/dev/null 2>&1; \ + then echo "$(2)"; \ + else echo "$(3)"; \ + fi; \ + rm -f "$$TMP" "$$TMPO" "$$TMPSU") + +# as-option +# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,) + +as-option = $(call try-run,\ + $(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2)) + +# as-instr +# Usage: cflags-y += $(call as-instr,instr,option1,option2) + +as-instr = $(call try-run,\ + printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3)) + +# cc-option +# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) + +cc-option = $(call try-run,\ + $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2)) + +# cc-option-yn +# Usage: flag := $(call cc-option-yn,-march=winchip-c6) +cc-option-yn = $(call try-run,\ + $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n) + +# cc-option-align +# Prefix align with either -falign or -malign +cc-option-align = $(subst -functions=0,,\ + $(call cc-option,-falign-functions=0,-malign-functions=0)) + +# cc-disable-warning +# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable) +cc-disable-warning = $(call try-run,\ + $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1))) + +# cc-version +# Usage gcc-ver := $(call cc-version) +cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) + +# cc-fullversion +# Usage gcc-ver := $(call cc-fullversion) +cc-fullversion = $(shell $(CONFIG_SHELL) \ + $(srctree)/scripts/gcc-version.sh -p $(CC)) + +# cc-ifversion +# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) +cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3)) + +# added for U-Boot +binutils-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/binutils-version.sh $(AS)) +dtc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/dtc-version.sh $(DTC)) + +# cc-ldoption +# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both) +cc-ldoption = $(call try-run,\ + $(CC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2)) + +# ld-option +# Usage: LDFLAGS += $(call ld-option, -X) +ld-option = $(call try-run,\ + $(CC) -x c /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2)) + +# ar-option +# Usage: KBUILD_ARFLAGS := $(call ar-option,D) +# Important: no spaces around options +ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2)) + +# ld-version +# Usage: $(call ld-version) +# Note this is mainly for HJ Lu's 3 number binutil versions +ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh) + +# ld-ifversion +# Usage: $(call ld-ifversion, -ge, 22252, y) +ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3)) + +###### + +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= +# Usage: +# $(Q)$(MAKE) $(build)=dir +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj + +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= +# Usage: +# $(Q)$(MAKE) $(modbuiltin)=dir +modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj + +# Prefix -I with $(srctree) if it is not an absolute path. +# skip if -I has no parameter +addtree = $(if $(patsubst -I%,%,$(1)), \ +$(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)) + +# Find all -I options and call addtree +flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) + +# echo command. +# Short version is used, if $(quiet) equals `quiet_', otherwise full one. +echo-cmd = $(if $($(quiet)cmd_$(1)),\ + echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) + +# printing commands +cmd = @$(echo-cmd) $(cmd_$(1)) + +# Add $(obj)/ for paths that are not absolute +objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o))) + +### +# if_changed - execute command if any prerequisite is newer than +# target, or command line has changed +# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies +# including used config symbols +# if_changed_rule - as if_changed but execute rule instead +# See Documentation/kbuild/makefiles.txt for more info + +ifneq ($(KBUILD_NOCMDDEP),1) +# Check if both arguments has same arguments. Result is empty string if equal. +# User may override this check using make KBUILD_NOCMDDEP=1 +arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ + $(filter-out $(cmd_$@), $(cmd_$(1))) ) +else +arg-check = $(if $(strip $(cmd_$@)),,1) +endif + +# >'< substitution is for echo to work, +# >$< substitution to preserve $ when reloading .cmd file +# note: when using inline perl scripts [perl -e '...$$t=1;...'] +# in $(cmd_xxx) double $$ your perl vars +make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))))) + +# Find any prerequisites that is newer than target or that does not exist. +# PHONY targets skipped in both cases. +any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) + +# Execute command if command has changed or prerequisite(s) are updated. +# +if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ + @set -e; \ + $(echo-cmd) $(cmd_$(1)); \ + echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd) + +# Execute the command and also postprocess generated .d dependencies file. +if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ + @set -e; \ + $(echo-cmd) $(cmd_$(1)); \ + scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\ + rm -f $(depfile); \ + mv -f $(dot-target).tmp $(dot-target).cmd) + +# Usage: $(call if_changed_rule,foo) +# Will check if $(cmd_foo) or any of the prerequisites changed, +# and if so will execute $(rule_foo). +if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \ + @set -e; \ + $(rule_$(1))) + +### +# why - tell why a a target got build +# enabled by make V=2 +# Output (listed in the order they are checked): +# (1) - due to target is PHONY +# (2) - due to target missing +# (3) - due to: file1.h file2.h +# (4) - due to command line change +# (5) - due to missing .cmd file +# (6) - due to target not in $(targets) +# (1) PHONY targets are always build +# (2) No target, so we better build it +# (3) Prerequisite is newer than target +# (4) The command line stored in the file named dir/.target.cmd +# differed from actual command line. This happens when compiler +# options changes +# (5) No dir/.target.cmd file (used to store command line) +# (6) No dir/.target.cmd file and target not listed in $(targets) +# This is a good hint that there is a bug in the kbuild file +ifeq ($(KBUILD_VERBOSE),2) +why = \ + $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ + $(if $(wildcard $@), \ + $(if $(strip $(any-prereq)),- due to: $(any-prereq), \ + $(if $(arg-check), \ + $(if $(cmd_$@),- due to command line change, \ + $(if $(filter $@, $(targets)), \ + - due to missing .cmd file, \ + - due to $(notdir $@) not in $$(targets) \ + ) \ + ) \ + ) \ + ), \ + - due to target missing \ + ) \ + ) + +echo-why = $(call escsq, $(strip $(why))) +endif diff --git a/qemu/roms/u-boot/scripts/Makefile b/qemu/roms/u-boot/scripts/Makefile new file mode 100644 index 000000000..68c998e58 --- /dev/null +++ b/qemu/roms/u-boot/scripts/Makefile @@ -0,0 +1,16 @@ +### +# scripts contains sources for various helper programs used throughout +# the kernel for the build process. +# --------------------------------------------------------------------------- +# docproc: Used in Documentation/DocBook + +# The following hostprogs-y programs are only build on demand +hostprogs-y += docproc + +# These targets are used internally to avoid "is up to date" messages +PHONY += build_docproc +build_docproc: $(obj)/docproc + @: + +# Let clean descend into subdirs +subdir- += basic diff --git a/qemu/roms/u-boot/scripts/Makefile.build b/qemu/roms/u-boot/scripts/Makefile.build new file mode 100644 index 000000000..6416c1a8b --- /dev/null +++ b/qemu/roms/u-boot/scripts/Makefile.build @@ -0,0 +1,516 @@ +# ========================================================================== +# Building +# ========================================================================== + +# Modified for U-Boot +ifeq ($(CONFIG_TPL_BUILD),y) + src := $(patsubst tpl/%,%,$(obj)) +else + ifeq ($(CONFIG_SPL_BUILD),y) + src := $(patsubst spl/%,%,$(obj)) + else + src := $(obj) + endif +endif + +PHONY := __build +__build: + +# Init all relevant variables used in kbuild files so +# 1) they have correct type +# 2) they do not inherit any value from the environment +obj-y := +obj-m := +lib-y := +lib-m := +always := +targets := +subdir-y := +subdir-m := +EXTRA_AFLAGS := +EXTRA_CFLAGS := +EXTRA_CPPFLAGS := +EXTRA_LDFLAGS := +asflags-y := +ccflags-y := +cppflags-y := +ldflags-y := + +subdir-asflags-y := +subdir-ccflags-y := + +# Read auto.conf if it exists, otherwise ignore +-include include/config/auto.conf + +# Added for U-Boot: Load U-Boot configuration +ifeq ($(CONFIG_TPL_BUILD),y) + -include include/tpl-autoconf.mk +else + ifeq ($(CONFIG_SPL_BUILD),y) + -include include/spl-autoconf.mk + else + -include include/autoconf.mk + endif +endif + +include scripts/Kbuild.include + +# For backward compatibility check that these variables do not change +save-cflags := $(CFLAGS) + +# The filename Kbuild has precedence over Makefile +kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) +kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) +include $(kbuild-file) + +# Added for U-Boot +asflags-y += $(PLATFORM_CPPFLAGS) +ccflags-y += $(PLATFORM_CPPFLAGS) +cppflags-y += $(PLATFORM_CPPFLAGS) + +# If the save-* variables changed error out +ifeq ($(KBUILD_NOPEDANTIC),) + ifneq ("$(save-cflags)","$(CFLAGS)") + $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y) + endif +endif + +# +# make W=... settings +# +# W=1 - warnings that may be relevant and does not occur too often +# W=2 - warnings that occur quite often but may still be relevant +# W=3 - the more obscure warnings, can most likely be ignored +# +# $(call cc-option, -W...) handles gcc -W.. options which +# are not supported by all versions of the compiler +ifdef KBUILD_ENABLE_EXTRA_GCC_CHECKS +warning- := $(empty) + +warning-1 := -Wextra -Wunused -Wno-unused-parameter +warning-1 += -Wmissing-declarations +warning-1 += -Wmissing-format-attribute +warning-1 += $(call cc-option, -Wmissing-prototypes) +warning-1 += -Wold-style-definition +warning-1 += $(call cc-option, -Wmissing-include-dirs) +warning-1 += $(call cc-option, -Wunused-but-set-variable) +warning-1 += $(call cc-disable-warning, missing-field-initializers) + +# Clang +warning-1 += $(call cc-disable-warning, initializer-overrides) +warning-1 += $(call cc-disable-warning, unused-value) +warning-1 += $(call cc-disable-warning, format) +warning-1 += $(call cc-disable-warning, unknown-warning-option) +warning-1 += $(call cc-disable-warning, sign-compare) +warning-1 += $(call cc-disable-warning, format-zero-length) +warning-1 += $(call cc-disable-warning, uninitialized) +warning-1 += $(call cc-option, -fcatch-undefined-behavior) + +warning-2 := -Waggregate-return +warning-2 += -Wcast-align +warning-2 += -Wdisabled-optimization +warning-2 += -Wnested-externs +warning-2 += -Wshadow +warning-2 += $(call cc-option, -Wlogical-op) +warning-2 += $(call cc-option, -Wmissing-field-initializers) + +warning-3 := -Wbad-function-cast +warning-3 += -Wcast-qual +warning-3 += -Wconversion +warning-3 += -Wpacked +warning-3 += -Wpadded +warning-3 += -Wpointer-arith +warning-3 += -Wredundant-decls +warning-3 += -Wswitch-default +warning-3 += $(call cc-option, -Wpacked-bitfield-compat) +warning-3 += $(call cc-option, -Wvla) + +warning := $(warning-$(findstring 1, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) +warning += $(warning-$(findstring 2, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) +warning += $(warning-$(findstring 3, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) + +ifeq ("$(strip $(warning))","") + $(error W=$(KBUILD_ENABLE_EXTRA_GCC_CHECKS) is unknown) +endif + +KBUILD_CFLAGS += $(warning) +endif + +include scripts/Makefile.lib + +ifdef host-progs +ifneq ($(hostprogs-y),$(host-progs)) +$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!) +hostprogs-y += $(host-progs) +endif +endif + +# Do not include host rules unless needed +ifneq ($(hostprogs-y)$(hostprogs-m),) +include scripts/Makefile.host +endif + +# Uncommented for U-Boot +# We need to create output dicrectory for SPL and TPL even for in-tree build +#ifneq ($(KBUILD_SRC),) +# Create output directory if not already present +_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) + +# Create directories for object files if directory does not exist +# Needed when obj-y := dir/file.o syntax is used +_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) +#endif + +ifndef obj +$(warning kbuild: Makefile.build is included improperly) +endif + +# =========================================================================== + +ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) +lib-target := $(obj)/lib.a +endif + +ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) +builtin-target := $(obj)/built-in.o +endif + +modorder-target := $(obj)/modules.order + +# We keep a list of all modules in $(MODVERDIR) + +__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ + $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ + $(subdir-ym) $(always) + @: + +# Linus' kernel sanity checking tool +ifneq ($(KBUILD_CHECKSRC),0) + ifeq ($(KBUILD_CHECKSRC),2) + quiet_cmd_force_checksrc = CHECK $< + cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + else + quiet_cmd_checksrc = CHECK $< + cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + endif +endif + +# Do section mismatch analysis for each module/built-in.o +ifdef CONFIG_DEBUG_SECTION_MISMATCH + cmd_secanalysis = ; scripts/mod/modpost $@ +endif + +# Compile C sources (.c) +# --------------------------------------------------------------------------- + +# Default is built-in, unless we know otherwise +modkern_cflags = \ + $(if $(part-of-module), \ + $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ + $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) +quiet_modtag := $(empty) $(empty) + +$(real-objs-m) : part-of-module := y +$(real-objs-m:.o=.i) : part-of-module := y +$(real-objs-m:.o=.s) : part-of-module := y +$(real-objs-m:.o=.lst): part-of-module := y + +$(real-objs-m) : quiet_modtag := [M] +$(real-objs-m:.o=.i) : quiet_modtag := [M] +$(real-objs-m:.o=.s) : quiet_modtag := [M] +$(real-objs-m:.o=.lst): quiet_modtag := [M] + +$(obj-m) : quiet_modtag := [M] + +# Default for not multi-part modules +modname = $(basetarget) + +$(multi-objs-m) : modname = $(modname-multi) +$(multi-objs-m:.o=.i) : modname = $(modname-multi) +$(multi-objs-m:.o=.s) : modname = $(modname-multi) +$(multi-objs-m:.o=.lst) : modname = $(modname-multi) +$(multi-objs-y) : modname = $(modname-multi) +$(multi-objs-y:.o=.i) : modname = $(modname-multi) +$(multi-objs-y:.o=.s) : modname = $(modname-multi) +$(multi-objs-y:.o=.lst) : modname = $(modname-multi) + +quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ +cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< + +$(obj)/%.s: $(src)/%.c FORCE + $(call if_changed_dep,cc_s_c) + +quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ +cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< + +$(obj)/%.i: $(src)/%.c FORCE + $(call if_changed_dep,cc_i_c) + +cmd_gensymtypes = \ + $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ + $(GENKSYMS) $(if $(1), -T $(2)) \ + $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ + $(if $(KBUILD_PRESERVE),-p) \ + -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) + +quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ +cmd_cc_symtypes_c = \ + set -e; \ + $(call cmd_gensymtypes,true,$@) >/dev/null; \ + test -s $@ || rm -f $@ + +$(obj)/%.symtypes : $(src)/%.c FORCE + $(call cmd,cc_symtypes_c) + +# C (.c) files +# The C file is compiled and updated dependency information is generated. +# (See cmd_cc_o_c + relevant part of rule_cc_o_c) + +quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ + +ifndef CONFIG_MODVERSIONS +cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< + +else +# When module versioning is enabled the following steps are executed: +# o compile a .tmp_.o from .c +# o if .tmp_.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, we just rename .tmp_.o to .o and +# are done. +# o otherwise, we calculate symbol versions using the good old +# genksyms on the preprocessed source and postprocess them in a way +# that they are usable as a linker script +# o generate .o from .tmp_.o using the linker to +# replace the unresolved symbols __crc_exported_symbol with +# the actual value of the checksum generated by genksyms + +cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< +cmd_modversions = \ + if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ + else \ + mv -f $(@D)/.tmp_$(@F) $@; \ + fi; +endif + +ifdef CONFIG_FTRACE_MCOUNT_RECORD +ifdef BUILD_C_RECORDMCOUNT +ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") + RECORDMCOUNT_FLAGS = -w +endif +# Due to recursion, we must skip empty.o. +# The empty.o file is created in the make process in order to determine +# the target endianness and word size. It is made before all other C +# files, including recordmcount. +sub_cmd_record_mcount = \ + if [ $(@) != "scripts/mod/empty.o" ]; then \ + $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ + fi; +recordmcount_source := $(srctree)/scripts/recordmcount.c \ + $(srctree)/scripts/recordmcount.h +else +sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ + "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ + "$(if $(CONFIG_64BIT),64,32)" \ + "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ + "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ + "$(if $(part-of-module),1,0)" "$(@)"; +recordmcount_source := $(srctree)/scripts/recordmcount.pl +endif +cmd_record_mcount = \ + if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \ + $(sub_cmd_record_mcount) \ + fi; +endif + +define rule_cc_o_c + $(call echo-cmd,checksrc) $(cmd_checksrc) \ + $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ + $(cmd_modversions) \ + $(call echo-cmd,record_mcount) \ + $(cmd_record_mcount) \ + scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ + $(dot-target).tmp; \ + rm -f $(depfile); \ + mv -f $(dot-target).tmp $(dot-target).cmd +endef + +# Built-in and composite module parts +$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + +# Single-part modules are special since we need to mark them in $(MODVERDIR) + +$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) + +quiet_cmd_cc_lst_c = MKLST $@ + cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ + $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ + System.map $(OBJDUMP) > $@ + +$(obj)/%.lst: $(src)/%.c FORCE + $(call if_changed_dep,cc_lst_c) + +# Compile assembler sources (.S) +# --------------------------------------------------------------------------- + +modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) + +$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) +$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) + +quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ +cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< + +$(obj)/%.s: $(src)/%.S FORCE + $(call if_changed_dep,as_s_S) + +quiet_cmd_as_o_S = AS $(quiet_modtag) $@ +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +$(obj)/%.o: $(src)/%.S FORCE + $(call if_changed_dep,as_o_S) + +targets += $(real-objs-y) $(real-objs-m) $(lib-y) +targets += $(extra-y) $(MAKECMDGOALS) $(always) + +# Linker scripts preprocessor (.lds.S -> .lds) +# --------------------------------------------------------------------------- +quiet_cmd_cpp_lds_S = LDS $@ + cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ + -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< + +$(obj)/%.lds: $(src)/%.lds.S FORCE + $(call if_changed_dep,cpp_lds_S) + +# ASN.1 grammar +# --------------------------------------------------------------------------- +quiet_cmd_asn1_compiler = ASN.1 $@ + cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \ + $(subst .h,.c,$@) $(subst .c,.h,$@) + +.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h + +$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler + $(call cmd,asn1_compiler) + +# Build the compiled-in targets +# --------------------------------------------------------------------------- + +# To build objects in subdirs, we need to descend into the directories +$(sort $(subdir-obj-y)): $(subdir-ym) ; + +# +# Rule to compile a set of .o files into one .o file +# +ifdef builtin-target +quiet_cmd_link_o_target = LD $@ +# If the list of objects to link is empty, just create an empty built-in.o +cmd_link_o_target = $(if $(strip $(obj-y)),\ + $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \ + $(cmd_secanalysis),\ + rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@) + +$(builtin-target): $(obj-y) FORCE + $(call if_changed,link_o_target) + +targets += $(builtin-target) +endif # builtin-target + +# +# Rule to create modules.order file +# +# Create commands to either record .ko file or cat modules.order from +# a subdirectory +modorder-cmds = \ + $(foreach m, $(modorder), \ + $(if $(filter %/modules.order, $m), \ + cat $m;, echo kernel/$m;)) + +$(modorder-target): $(subdir-ym) FORCE + $(Q)(cat /dev/null; $(modorder-cmds)) > $@ + +# +# Rule to compile a set of .o files into one .a file +# +ifdef lib-target +quiet_cmd_link_l_target = AR $@ +cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y) + +$(lib-target): $(lib-y) FORCE + $(call if_changed,link_l_target) + +targets += $(lib-target) +endif + +# +# Rule to link composite objects +# +# Composite objects are specified in kbuild makefile as follows: +# -objs := +# or +# -y := +link_multi_deps = \ +$(filter $(addprefix $(obj)/, \ +$($(subst $(obj)/,,$(@:.o=-objs))) \ +$($(subst $(obj)/,,$(@:.o=-y)))), $^) + +quiet_cmd_link_multi-y = LD $@ +cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) + +quiet_cmd_link_multi-m = LD [M] $@ +cmd_link_multi-m = $(cmd_link_multi-y) + +# We would rather have a list of rules like +# foo.o: $(foo-objs) +# but that's not so easy, so we rather make all composite objects depend +# on the set of all their parts +$(multi-used-y) : %.o: $(multi-objs-y) FORCE + $(call if_changed,link_multi-y) + +$(multi-used-m) : %.o: $(multi-objs-m) FORCE + $(call if_changed,link_multi-m) + @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) + +targets += $(multi-used-y) $(multi-used-m) + + +# Descending +# --------------------------------------------------------------------------- + +PHONY += $(subdir-ym) +$(subdir-ym): + $(Q)$(MAKE) $(build)=$@ + +# Add FORCE to the prequisites of a target to force it to be always rebuilt. +# --------------------------------------------------------------------------- + +PHONY += FORCE + +FORCE: + +# Read all saved command lines and dependencies for the $(targets) we +# may be building above, using $(if_changed{,_dep}). As an +# optimization, we don't need to read them if the target does not +# exist, we will rebuild anyway in that case. + +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + include $(cmd_files) +endif + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/qemu/roms/u-boot/scripts/Makefile.clean b/qemu/roms/u-boot/scripts/Makefile.clean new file mode 100644 index 000000000..d6dcd47f6 --- /dev/null +++ b/qemu/roms/u-boot/scripts/Makefile.clean @@ -0,0 +1,109 @@ +# ========================================================================== +# Cleaning up +# ========================================================================== + +src := $(obj) + +PHONY := __clean +__clean: + +# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir +# Usage: +# $(Q)$(MAKE) $(clean)=dir +clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj + +# The filename Kbuild has precedence over Makefile +kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) +include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile) + +# Figure out what we need to build from the various variables +# ========================================================================== + +__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) +subdir-y += $(__subdir-y) +__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) +subdir-m += $(__subdir-m) +__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n))) +subdir-n += $(__subdir-n) +__subdir- := $(patsubst %/,%,$(filter %/, $(obj-))) +subdir- += $(__subdir-) + +# Subdirectories we need to descend into + +subdir-ym := $(sort $(subdir-y) $(subdir-m)) +subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-)) + +# Add subdir path + +subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn)) + +# Temporal work-around for U-Boot + +subdir-ymn := $(foreach f, $(subdir-ymn), \ + $(if $(wildcard $(srctree)/$f/Makefile),$f)) + +# build a list of files to remove, usually relative to the current +# directory + +__clean-files := $(extra-y) $(always) \ + $(targets) $(clean-files) \ + $(host-progs) \ + $(hostprogs-y) $(hostprogs-m) $(hostprogs-) + +__clean-files := $(filter-out $(no-clean-files), $(__clean-files)) + +# as clean-files is given relative to the current directory, this adds +# a $(obj) prefix, except for absolute paths + +__clean-files := $(wildcard \ + $(addprefix $(obj)/, $(filter-out /%, $(__clean-files))) \ + $(filter /%, $(__clean-files))) + +# as clean-dirs is given relative to the current directory, this adds +# a $(obj) prefix, except for absolute paths + +__clean-dirs := $(wildcard \ + $(addprefix $(obj)/, $(filter-out /%, $(clean-dirs))) \ + $(filter /%, $(clean-dirs))) + +# ========================================================================== + +quiet_cmd_clean = CLEAN $(obj) + cmd_clean = rm -f $(__clean-files) +quiet_cmd_cleandir = CLEAN $(__clean-dirs) + cmd_cleandir = rm -rf $(__clean-dirs) + + +__clean: $(subdir-ymn) +ifneq ($(strip $(__clean-files)),) + +$(call cmd,clean) +endif +ifneq ($(strip $(__clean-dirs)),) + +$(call cmd,cleandir) +endif +ifneq ($(strip $(clean-rule)),) + +$(clean-rule) +endif + @: + + +# =========================================================================== +# Generic stuff +# =========================================================================== + +# Descending +# --------------------------------------------------------------------------- + +PHONY += $(subdir-ymn) +$(subdir-ymn): + $(Q)$(MAKE) $(clean)=$@ + +# If quiet is set, only print short version of command + +cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1)) + + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/qemu/roms/u-boot/scripts/Makefile.host b/qemu/roms/u-boot/scripts/Makefile.host new file mode 100644 index 000000000..1ac414fd5 --- /dev/null +++ b/qemu/roms/u-boot/scripts/Makefile.host @@ -0,0 +1,170 @@ +# ========================================================================== +# Building binaries on the host system +# Binaries are used during the compilation of the kernel, for example +# to preprocess a data file. +# +# Both C and C++ are supported, but preferred language is C for such utilities. +# +# Sample syntax (see Documentation/kbuild/makefiles.txt for reference) +# hostprogs-y := bin2hex +# Will compile bin2hex.c and create an executable named bin2hex +# +# hostprogs-y := lxdialog +# lxdialog-objs := checklist.o lxdialog.o +# Will compile lxdialog.c and checklist.c, and then link the executable +# lxdialog, based on checklist.o and lxdialog.o +# +# hostprogs-y := qconf +# qconf-cxxobjs := qconf.o +# qconf-objs := menu.o +# Will compile qconf as a C++ program, and menu as a C program. +# They are linked as C++ code to the executable qconf + +# hostprogs-y := conf +# conf-objs := conf.o libkconfig.so +# libkconfig-objs := expr.o type.o +# Will create a shared library named libkconfig.so that consists of +# expr.o and type.o (they are both compiled as C code and the object files +# are made as position independent code). +# conf.c is compiled as a C program, and conf.o is linked together with +# libkconfig.so as the executable conf. +# Note: Shared libraries consisting of C++ files are not supported + +__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m)) + +# C code +# Executables compiled from a single .c file +host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m))) + +# C executables linked based on several .o files +host-cmulti := $(foreach m,$(__hostprogs),\ + $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m)))) + +# Object (.o) files compiled from .c files +host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs))) + +# C++ code +# C++ executables compiled from at least on .cc file +# and zero or more .c files +host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m))) + +# C++ Object (.o) files compiled from .cc files +host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs))) + +# Shared libaries (only .c supported) +# Shared libraries (.so) - all .so files referenced in "xxx-objs" +host-cshlib := $(sort $(filter %.so, $(host-cobjs))) +# Remove .so files from "xxx-objs" +host-cobjs := $(filter-out %.so,$(host-cobjs)) + +#Object (.o) files used by the shared libaries +host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs)))) + +# output directory for programs/.o files +# hostprogs-y := tools/build may have been specified. Retrieve directory +host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f)))) +# directory of .o files from prog-objs notation +host-objdirs += $(foreach f,$(host-cmulti), \ + $(foreach m,$($(f)-objs), \ + $(if $(dir $(m)),$(dir $(m))))) +# directory of .o files from prog-cxxobjs notation +host-objdirs += $(foreach f,$(host-cxxmulti), \ + $(foreach m,$($(f)-cxxobjs), \ + $(if $(dir $(m)),$(dir $(m))))) + +host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs)))) + + +__hostprogs := $(addprefix $(obj)/,$(__hostprogs)) +host-csingle := $(addprefix $(obj)/,$(host-csingle)) +host-cmulti := $(addprefix $(obj)/,$(host-cmulti)) +host-cobjs := $(addprefix $(obj)/,$(host-cobjs)) +host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti)) +host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs)) +host-cshlib := $(addprefix $(obj)/,$(host-cshlib)) +host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs)) +host-objdirs := $(addprefix $(obj)/,$(host-objdirs)) + +obj-dirs += $(host-objdirs) + +##### +# Handle options to gcc. Support building with separate output directory + +_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) \ + $(HOSTCFLAGS_$(basetarget).o) +_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \ + $(HOSTCXXFLAGS_$(basetarget).o) + +ifeq ($(KBUILD_SRC),) +__hostc_flags = $(_hostc_flags) +__hostcxx_flags = $(_hostcxx_flags) +else +__hostc_flags = -I$(obj) $(call flags,_hostc_flags) +__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags) +endif + +hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags) +hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags) + +##### +# Compile programs on the host + +# Create executable from a single .c file +# host-csingle -> Executable +quiet_cmd_host-csingle = HOSTCC $@ + cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \ + $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) +$(host-csingle): $(obj)/%: $(src)/%.c FORCE + $(call if_changed_dep,host-csingle) + +# Link an executable based on list of .o files, all plain c +# host-cmulti -> executable +quiet_cmd_host-cmulti = HOSTLD $@ + cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \ + $(addprefix $(obj)/,$($(@F)-objs)) \ + $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) +$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE + $(call if_changed,host-cmulti) + +# Create .o file from a single .c file +# host-cobjs -> .o +quiet_cmd_host-cobjs = HOSTCC $@ + cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $< +$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE + $(call if_changed_dep,host-cobjs) + +# Link an executable based on list of .o files, a mixture of .c and .cc +# host-cxxmulti -> executable +quiet_cmd_host-cxxmulti = HOSTLD $@ + cmd_host-cxxmulti = $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \ + $(foreach o,objs cxxobjs,\ + $(addprefix $(obj)/,$($(@F)-$(o)))) \ + $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) +$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE + $(call if_changed,host-cxxmulti) + +# Create .o file from a single .cc (C++) file +quiet_cmd_host-cxxobjs = HOSTCXX $@ + cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $< +$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE + $(call if_changed_dep,host-cxxobjs) + +# Compile .c file, create position independent .o file +# host-cshobjs -> .o +quiet_cmd_host-cshobjs = HOSTCC -fPIC $@ + cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $< +$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE + $(call if_changed_dep,host-cshobjs) + +# Link a shared library, based on position independent .o files +# *.o -> .so shared library (host-cshlib) +quiet_cmd_host-cshlib = HOSTLLD -shared $@ + cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \ + $(addprefix $(obj)/,$($(@F:.so=-objs))) \ + $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) +$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE + $(call if_changed,host-cshlib) + +targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\ + $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) + diff --git a/qemu/roms/u-boot/scripts/Makefile.lib b/qemu/roms/u-boot/scripts/Makefile.lib new file mode 100644 index 000000000..a04439dcc --- /dev/null +++ b/qemu/roms/u-boot/scripts/Makefile.lib @@ -0,0 +1,381 @@ +# Backward compatibility +asflags-y += $(EXTRA_AFLAGS) +ccflags-y += $(EXTRA_CFLAGS) +cppflags-y += $(EXTRA_CPPFLAGS) +ldflags-y += $(EXTRA_LDFLAGS) + +# +# flags that take effect in sub directories +export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y) +export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y) + +# Figure out what we need to build from the various variables +# =========================================================================== + +# When an object is listed to be built compiled-in and modular, +# only build the compiled-in version + +obj-m := $(filter-out $(obj-y),$(obj-m)) + +# Libraries are always collected in one lib file. +# Filter out objects already built-in + +lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) + + +# Handle objects in subdirs +# --------------------------------------------------------------------------- +# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o +# and add the directory to the list of dirs to descend into: $(subdir-y) +# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) +# and add the directory to the list of dirs to descend into: $(subdir-m) + +# Determine modorder. +# Unfortunately, we don't have information about ordering between -y +# and -m subdirs. Just put -y's first. +modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko)) + +__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) +subdir-y += $(__subdir-y) +__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) +subdir-m += $(__subdir-m) +obj-y := $(patsubst %/, %/built-in.o, $(obj-y)) +obj-m := $(filter-out %/, $(obj-m)) + +# Subdirectories we need to descend into + +subdir-ym := $(sort $(subdir-y) $(subdir-m)) + +# if $(foo-objs) exists, foo.o is a composite object +multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) +multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) +multi-used := $(multi-used-y) $(multi-used-m) +single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m))) + +# Build list of the parts of our composite objects, our composite +# objects depend on those (obviously) +multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y))) +multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y))) +multi-objs := $(multi-objs-y) $(multi-objs-m) + +# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to +# tell kbuild to descend +subdir-obj-y := $(filter %/built-in.o, $(obj-y)) + +# $(obj-dirs) is a list of directories that contain object files +obj-dirs := $(dir $(multi-objs) $(obj-y)) + +# Replace multi-part objects by their individual parts, look at local dir only +real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y) +real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) + +# Add subdir path + +extra-y := $(addprefix $(obj)/,$(extra-y)) +always := $(addprefix $(obj)/,$(always)) +targets := $(addprefix $(obj)/,$(targets)) +modorder := $(addprefix $(obj)/,$(modorder)) +obj-y := $(addprefix $(obj)/,$(obj-y)) +obj-m := $(addprefix $(obj)/,$(obj-m)) +lib-y := $(addprefix $(obj)/,$(lib-y)) +subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y)) +real-objs-y := $(addprefix $(obj)/,$(real-objs-y)) +real-objs-m := $(addprefix $(obj)/,$(real-objs-m)) +single-used-m := $(addprefix $(obj)/,$(single-used-m)) +multi-used-y := $(addprefix $(obj)/,$(multi-used-y)) +multi-used-m := $(addprefix $(obj)/,$(multi-used-m)) +multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y)) +multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m)) +subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) +obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) + +# These flags are needed for modversions and compiling, so we define them here +# already +# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will +# end up in (or would, if it gets compiled in) +# Note: Files that end up in two or more modules are compiled without the +# KBUILD_MODNAME definition. The reason is that any made-up name would +# differ in different configs. +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ + -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + +orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ + $(ccflags-y) $(CFLAGS_$(basetarget).o) +_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) +_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ + $(asflags-y) $(AFLAGS_$(basetarget).o) +_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) + +# +# Enable gcov profiling flags for a file, directory or for all files depending +# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL +# (in this order) +# +ifeq ($(CONFIG_GCOV_KERNEL),y) +_c_flags += $(if $(patsubst n%,, \ + $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \ + $(CFLAGS_GCOV)) +endif + +# If building the kernel in a separate objtree expand all occurrences +# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). + +ifeq ($(KBUILD_SRC),) +__c_flags = $(_c_flags) +__a_flags = $(_a_flags) +__cpp_flags = $(_cpp_flags) +else + +# -I$(obj) locates generated .h files +# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files +# and locates generated .h files +# FIXME: Replace both with specific CFLAGS* statements in the makefiles +__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags) +__a_flags = $(call flags,_a_flags) +__cpp_flags = $(call flags,_cpp_flags) +endif + +# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE +c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \ + $(__c_flags) $(modkern_cflags) \ + -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \ + $(__a_flags) $(modkern_aflags) + +cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \ + $(__cpp_flags) + +ld_flags = $(LDFLAGS) $(ldflags-y) + +# Modified for U-Boot +dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ + -I$(srctree)/arch/$(ARCH)/dts \ + -undef -D__DTS__ + +# Finds the multi-part object the current object will be linked into +modname-multi = $(sort $(foreach m,$(multi-used),\ + $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=)))) + +ifdef REGENERATE_PARSERS + +# GPERF +# --------------------------------------------------------------------------- +quiet_cmd_gperf = GPERF $@ + cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $< + +.PRECIOUS: $(src)/%.hash.c_shipped +$(src)/%.hash.c_shipped: $(src)/%.gperf + $(call cmd,gperf) + +# LEX +# --------------------------------------------------------------------------- +LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy) + +quiet_cmd_flex = LEX $@ + cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $< + +.PRECIOUS: $(src)/%.lex.c_shipped +$(src)/%.lex.c_shipped: $(src)/%.l + $(call cmd,flex) + +# YACC +# --------------------------------------------------------------------------- +YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy) + +quiet_cmd_bison = YACC $@ + cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $< + +.PRECIOUS: $(src)/%.tab.c_shipped +$(src)/%.tab.c_shipped: $(src)/%.y + $(call cmd,bison) + +quiet_cmd_bison_h = YACC $@ + cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $< + +.PRECIOUS: $(src)/%.tab.h_shipped +$(src)/%.tab.h_shipped: $(src)/%.y + $(call cmd,bison_h) + +endif + +# Shipped files +# =========================================================================== + +quiet_cmd_shipped = SHIPPED $@ +cmd_shipped = cat $< > $@ + +$(obj)/%: $(src)/%_shipped + $(call cmd,shipped) + +# Commands useful for building a boot image +# =========================================================================== +# +# Use as following: +# +# target: source(s) FORCE +# $(if_changed,ld/objcopy/gzip) +# +# and add target to extra-y so that we know we have to +# read in the saved command line + +# Linking +# --------------------------------------------------------------------------- + +quiet_cmd_ld = LD $@ +cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \ + $(filter-out FORCE,$^) -o $@ + +# Objcopy +# --------------------------------------------------------------------------- + +quiet_cmd_objcopy = OBJCOPY $@ +cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ + +# Gzip +# --------------------------------------------------------------------------- + +quiet_cmd_gzip = GZIP $@ +cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \ + (rm -f $@ ; false) + +# DTC +# --------------------------------------------------------------------------- + +# Generate an assembly file to wrap the output of the device tree compiler +quiet_cmd_dt_S_dtb= DTB $@ +# Modified for U-Boot +cmd_dt_S_dtb= \ +( \ + echo '.section .dtb.init.rodata,"a"'; \ + echo '.global __dtb_$(*F)_begin'; \ + echo '__dtb_$(*F)_begin:'; \ + echo '.incbin "$<" '; \ + echo '__dtb_$(*F)_end:'; \ + echo '.global __dtb_$(*F)_end'; \ +) > $@ + +$(obj)/%.dtb.S: $(obj)/%.dtb + $(call cmd,dt_S_dtb) + +quiet_cmd_dtc = DTC $@ +# Modified for U-Boot +cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ + dtc -O dtb -o $@ -b 0 \ + -i $(dir $<) $(DTC_FLAGS) \ + -d $(depfile).dtc.tmp $(dtc-tmp) ; \ + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) + +$(obj)/%.dtb: $(src)/%.dts FORCE + $(call if_changed_dep,dtc) + +dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) + +# Helper targets for Installing DTBs into the boot directory +quiet_cmd_dtb_install = INSTALL $< + cmd_dtb_install = cp $< $(2) + +_dtbinst_pre_: + $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi + $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi + $(Q)mkdir -p $(INSTALL_DTBS_PATH) + +%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_ + $(call cmd,dtb_install,$(INSTALL_DTBS_PATH)) + +# Bzip2 +# --------------------------------------------------------------------------- + +# Bzip2 and LZMA do not include size in file... so we have to fake that; +# append the size as a 32-bit littleendian number as gzip does. +size_append = printf $(shell \ +dec_size=0; \ +for F in $1; do \ + fsize=$$(stat -c "%s" $$F); \ + dec_size=$$(expr $$dec_size + $$fsize); \ +done; \ +printf "%08x\n" $$dec_size | \ + sed 's/\(..\)/\1 /g' | { \ + read ch0 ch1 ch2 ch3; \ + for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ + printf '%s%03o' '\\' $$((0x$$ch)); \ + done; \ + } \ +) + +quiet_cmd_bzip2 = BZIP2 $@ +cmd_bzip2 = (cat $(filter-out FORCE,$^) | \ + bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + +# Lzma +# --------------------------------------------------------------------------- + +quiet_cmd_lzma = LZMA $@ +cmd_lzma = (cat $(filter-out FORCE,$^) | \ + lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + +quiet_cmd_lzo = LZO $@ +cmd_lzo = (cat $(filter-out FORCE,$^) | \ + lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + +quiet_cmd_lz4 = LZ4 $@ +cmd_lz4 = (cat $(filter-out FORCE,$^) | \ + lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + +# U-Boot mkimage +# --------------------------------------------------------------------------- + +MKIMAGE := $(srctree)/scripts/mkuboot.sh + +# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces +# the number of overrides in arch makefiles +UIMAGE_ARCH ?= $(SRCARCH) +UIMAGE_COMPRESSION ?= $(if $(2),$(2),none) +UIMAGE_OPTS-y ?= +UIMAGE_TYPE ?= kernel +UIMAGE_LOADADDR ?= arch_must_set_this +UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) +UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)' +UIMAGE_IN ?= $< +UIMAGE_OUT ?= $@ + +quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT) + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ + -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ + -T $(UIMAGE_TYPE) \ + -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ + -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT) + +# XZ +# --------------------------------------------------------------------------- +# Use xzkern to compress the kernel image and xzmisc to compress other things. +# +# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage +# of the kernel decompressor. A BCJ filter is used if it is available for +# the target architecture. xzkern also appends uncompressed size of the data +# using size_append. The .xz format has the size information available at +# the end of the file too, but it's in more complex format and it's good to +# avoid changing the part of the boot code that reads the uncompressed size. +# Note that the bytes added by size_append will make the xz tool think that +# the file is corrupt. This is expected. +# +# xzmisc doesn't use size_append, so it can be used to create normal .xz +# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very +# big dictionary would increase the memory usage too much in the multi-call +# decompression mode. A BCJ filter isn't used either. +quiet_cmd_xzkern = XZKERN $@ +cmd_xzkern = (cat $(filter-out FORCE,$^) | \ + sh $(srctree)/scripts/xz_wrap.sh && \ + $(call size_append, $(filter-out FORCE,$^))) > $@ || \ + (rm -f $@ ; false) + +quiet_cmd_xzmisc = XZMISC $@ +cmd_xzmisc = (cat $(filter-out FORCE,$^) | \ + xz --check=crc32 --lzma2=dict=1MiB) > $@ || \ + (rm -f $@ ; false) diff --git a/qemu/roms/u-boot/scripts/basic/.gitignore b/qemu/roms/u-boot/scripts/basic/.gitignore new file mode 100644 index 000000000..a776371a3 --- /dev/null +++ b/qemu/roms/u-boot/scripts/basic/.gitignore @@ -0,0 +1 @@ +fixdep diff --git a/qemu/roms/u-boot/scripts/basic/Makefile b/qemu/roms/u-boot/scripts/basic/Makefile new file mode 100644 index 000000000..4fcef87bb --- /dev/null +++ b/qemu/roms/u-boot/scripts/basic/Makefile @@ -0,0 +1,15 @@ +### +# Makefile.basic lists the most basic programs used during the build process. +# The programs listed herein are what are needed to do the basic stuff, +# such as fix file dependencies. +# This initial step is needed to avoid files to be recompiled +# when kernel configuration changes (which is what happens when +# .config is included by main Makefile. +# --------------------------------------------------------------------------- +# fixdep: Used to generate dependency information during build process + +hostprogs-y := fixdep +always := $(hostprogs-y) + +# fixdep is needed to compile other host programs +$(addprefix $(obj)/,$(filter-out fixdep,$(always))): $(obj)/fixdep diff --git a/qemu/roms/u-boot/scripts/basic/fixdep.c b/qemu/roms/u-boot/scripts/basic/fixdep.c new file mode 100644 index 000000000..078fe1d64 --- /dev/null +++ b/qemu/roms/u-boot/scripts/basic/fixdep.c @@ -0,0 +1,462 @@ +/* + * "Optimize" a list of dependencies as spit out by gcc -MD + * for the kernel build + * =========================================================================== + * + * Author Kai Germaschewski + * Copyright 2002 by Kai Germaschewski + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * + * Introduction: + * + * gcc produces a very nice and correct list of dependencies which + * tells make when to remake a file. + * + * To use this list as-is however has the drawback that virtually + * every file in the kernel includes autoconf.h. + * + * If the user re-runs make *config, autoconf.h will be + * regenerated. make notices that and will rebuild every file which + * includes autoconf.h, i.e. basically all files. This is extremely + * annoying if the user just changed CONFIG_HIS_DRIVER from n to m. + * + * So we play the same trick that "mkdep" played before. We replace + * the dependency on autoconf.h by a dependency on every config + * option which is mentioned in any of the listed prequisites. + * + * kconfig populates a tree in include/config/ with an empty file + * for each config symbol and when the configuration is updated + * the files representing changed config options are touched + * which then let make pick up the changes and the files that use + * the config symbols are rebuilt. + * + * So if the user changes his CONFIG_HIS_DRIVER option, only the objects + * which depend on "include/linux/config/his/driver.h" will be rebuilt, + * so most likely only his driver ;-) + * + * The idea above dates, by the way, back to Michael E Chastain, AFAIK. + * + * So to get dependencies right, there are two issues: + * o if any of the files the compiler read changed, we need to rebuild + * o if the command line given to the compile the file changed, we + * better rebuild as well. + * + * The former is handled by using the -MD output, the later by saving + * the command line used to compile the old object and comparing it + * to the one we would now use. + * + * Again, also this idea is pretty old and has been discussed on + * kbuild-devel a long time ago. I don't have a sensibly working + * internet connection right now, so I rather don't mention names + * without double checking. + * + * This code here has been based partially based on mkdep.c, which + * says the following about its history: + * + * Copyright abandoned, Michael Chastain, . + * This is a C version of syncdep.pl by Werner Almesberger. + * + * + * It is invoked as + * + * fixdep + * + * and will read the dependency file + * + * The transformed dependency snipped is written to stdout. + * + * It first generates a line + * + * cmd_ = + * + * and then basically copies the ..d file to stdout, in the + * process filtering out the dependency on autoconf.h and adding + * dependencies on include/config/my/option.h for every + * CONFIG_MY_OPTION encountered in any of the prequisites. + * + * It will also filter out all the dependencies on *.ver. We need + * to make sure that the generated version checksum are globally up + * to date before even starting the recursive build, so it's too late + * at this point anyway. + * + * The algorithm to grep for "CONFIG_..." is bit unusual, but should + * be fast ;-) We don't even try to really parse the header files, but + * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will + * be picked up as well. It's not a problem with respect to + * correctness, since that can only give too many dependencies, thus + * we cannot miss a rebuild. Since people tend to not mention totally + * unrelated CONFIG_ options all over the place, it's not an + * efficiency problem either. + * + * (Note: it'd be easy to port over the complete mkdep state machine, + * but I don't think the added complexity is worth it) + */ +/* + * Note 2: if somebody writes HELLO_CONFIG_BOOM in a file, it will depend onto + * CONFIG_BOOM. This could seem a bug (not too hard to fix), but please do not + * fix it! Some UserModeLinux files (look at arch/um/) call CONFIG_BOOM as + * UML_CONFIG_BOOM, to avoid conflicts with /usr/include/linux/autoconf.h, + * through arch/um/include/uml-config.h; this fixdep "bug" makes sure that + * those files will have correct dependencies. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define INT_CONF ntohl(0x434f4e46) +#define INT_ONFI ntohl(0x4f4e4649) +#define INT_NFIG ntohl(0x4e464947) +#define INT_FIG_ ntohl(0x4649475f) + +char *target; +char *depfile; +char *cmdline; + +static void usage(void) +{ + fprintf(stderr, "Usage: fixdep \n"); + exit(1); +} + +/* + * Print out the commandline prefixed with cmd_ := + */ +static void print_cmdline(void) +{ + printf("cmd_%s := %s\n\n", target, cmdline); +} + +struct item { + struct item *next; + unsigned int len; + unsigned int hash; + char name[0]; +}; + +#define HASHSZ 256 +static struct item *hashtab[HASHSZ]; + +static unsigned int strhash(const char *str, unsigned int sz) +{ + /* fnv32 hash */ + unsigned int i, hash = 2166136261U; + + for (i = 0; i < sz; i++) + hash = (hash ^ str[i]) * 0x01000193; + return hash; +} + +/* + * Lookup a value in the configuration string. + */ +static int is_defined_config(const char *name, int len, unsigned int hash) +{ + struct item *aux; + + for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) { + if (aux->hash == hash && aux->len == len && + memcmp(aux->name, name, len) == 0) + return 1; + } + return 0; +} + +/* + * Add a new value to the configuration string. + */ +static void define_config(const char *name, int len, unsigned int hash) +{ + struct item *aux = malloc(sizeof(*aux) + len); + + if (!aux) { + perror("fixdep:malloc"); + exit(1); + } + memcpy(aux->name, name, len); + aux->len = len; + aux->hash = hash; + aux->next = hashtab[hash % HASHSZ]; + hashtab[hash % HASHSZ] = aux; +} + +/* + * Clear the set of configuration strings. + */ +static void clear_config(void) +{ + struct item *aux, *next; + unsigned int i; + + for (i = 0; i < HASHSZ; i++) { + for (aux = hashtab[i]; aux; aux = next) { + next = aux->next; + free(aux); + } + hashtab[i] = NULL; + } +} + +/* + * Record the use of a CONFIG_* word. + */ +static void use_config(const char *m, int slen) +{ + unsigned int hash = strhash(m, slen); + int c, i; + + if (is_defined_config(m, slen, hash)) + return; + + define_config(m, slen, hash); + + printf(" $(wildcard include/config/"); + for (i = 0; i < slen; i++) { + c = m[i]; + if (c == '_') + c = '/'; + else + c = tolower(c); + putchar(c); + } + printf(".h) \\\n"); +} + +static void parse_config_file(const char *map, size_t len) +{ + const int *end = (const int *) (map + len); + /* start at +1, so that p can never be < map */ + const int *m = (const int *) map + 1; + const char *p, *q; + + for (; m < end; m++) { + if (*m == INT_CONF) { p = (char *) m ; goto conf; } + if (*m == INT_ONFI) { p = (char *) m-1; goto conf; } + if (*m == INT_NFIG) { p = (char *) m-2; goto conf; } + if (*m == INT_FIG_) { p = (char *) m-3; goto conf; } + continue; + conf: + if (p > map + len - 7) + continue; + if (memcmp(p, "CONFIG_", 7)) + continue; + for (q = p + 7; q < map + len; q++) { + if (!(isalnum(*q) || *q == '_')) + goto found; + } + continue; + + found: + if (!memcmp(q - 7, "_MODULE", 7)) + q -= 7; + if( (q-p-7) < 0 ) + continue; + use_config(p+7, q-p-7); + } +} + +/* test is s ends in sub */ +static int strrcmp(char *s, char *sub) +{ + int slen = strlen(s); + int sublen = strlen(sub); + + if (sublen > slen) + return 1; + + return memcmp(s + slen - sublen, sub, sublen); +} + +static void do_config_file(const char *filename) +{ + struct stat st; + int fd; + void *map; + + fd = open(filename, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "fixdep: error opening config file: "); + perror(filename); + exit(2); + } + fstat(fd, &st); + if (st.st_size == 0) { + close(fd); + return; + } + map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0); + if ((long) map == -1) { + perror("fixdep: mmap"); + close(fd); + return; + } + + parse_config_file(map, st.st_size); + + munmap(map, st.st_size); + + close(fd); +} + +/* + * Important: The below generated source_foo.o and deps_foo.o variable + * assignments are parsed not only by make, but also by the rather simple + * parser in scripts/mod/sumversion.c. + */ +static void parse_dep_file(void *map, size_t len) +{ + char *m = map; + char *end = m + len; + char *p; + char s[PATH_MAX]; + int is_target; + int saw_any_target = 0; + int is_first_dep = 0; + + clear_config(); + + while (m < end) { + /* Skip any "white space" */ + while (m < end && (*m == ' ' || *m == '\\' || *m == '\n')) + m++; + /* Find next "white space" */ + p = m; + while (p < end && *p != ' ' && *p != '\\' && *p != '\n') + p++; + /* Is the token we found a target name? */ + is_target = (*(p-1) == ':'); + /* Don't write any target names into the dependency file */ + if (is_target) { + /* The /next/ file is the first dependency */ + is_first_dep = 1; + } else { + /* Save this token/filename */ + memcpy(s, m, p-m); + s[p - m] = 0; + + /* Ignore certain dependencies */ + if (strrcmp(s, "include/generated/autoconf.h") && + strrcmp(s, "arch/um/include/uml-config.h") && + strrcmp(s, "include/linux/kconfig.h") && + strrcmp(s, ".ver")) { + /* + * Do not list the source file as dependency, + * so that kbuild is not confused if a .c file + * is rewritten into .S or vice versa. Storing + * it in source_* is needed for modpost to + * compute srcversions. + */ + if (is_first_dep) { + /* + * If processing the concatenation of + * multiple dependency files, only + * process the first target name, which + * will be the original source name, + * and ignore any other target names, + * which will be intermediate temporary + * files. + */ + if (!saw_any_target) { + saw_any_target = 1; + printf("source_%s := %s\n\n", + target, s); + printf("deps_%s := \\\n", + target); + } + is_first_dep = 0; + } else + printf(" %s \\\n", s); + do_config_file(s); + } + } + /* + * Start searching for next token immediately after the first + * "whitespace" character that follows this token. + */ + m = p + 1; + } + + if (!saw_any_target) { + fprintf(stderr, "fixdep: parse error; no targets found\n"); + exit(1); + } + + printf("\n%s: $(deps_%s)\n\n", target, target); + printf("$(deps_%s):\n", target); +} + +static void print_deps(void) +{ + struct stat st; + int fd; + void *map; + + fd = open(depfile, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "fixdep: error opening depfile: "); + perror(depfile); + exit(2); + } + if (fstat(fd, &st) < 0) { + fprintf(stderr, "fixdep: error fstat'ing depfile: "); + perror(depfile); + exit(2); + } + if (st.st_size == 0) { + fprintf(stderr,"fixdep: %s is empty\n",depfile); + close(fd); + return; + } + map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0); + if ((long) map == -1) { + perror("fixdep: mmap"); + close(fd); + return; + } + + parse_dep_file(map, st.st_size); + + munmap(map, st.st_size); + + close(fd); +} + +static void traps(void) +{ + static char test[] __attribute__((aligned(sizeof(int)))) = "CONF"; + int *p = (int *)test; + + if (*p != INT_CONF) { + fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianness? %#x\n", + *p); + exit(2); + } +} + +int main(int argc, char *argv[]) +{ + traps(); + + if (argc != 4) + usage(); + + depfile = argv[1]; + target = argv[2]; + cmdline = argv[3]; + + print_cmdline(); + print_deps(); + + return 0; +} diff --git a/qemu/roms/u-boot/scripts/binutils-version.sh b/qemu/roms/u-boot/scripts/binutils-version.sh new file mode 100644 index 000000000..d4d9eb436 --- /dev/null +++ b/qemu/roms/u-boot/scripts/binutils-version.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# +# binutils-version [-p] gas-command +# +# Prints the binutils version of `gas-command' in a canonical 4-digit form +# such as `0222' for binutils 2.22 +# + +gas="$*" + +if [ ${#gas} -eq 0 ]; then + echo "Error: No assembler specified." + printf "Usage:\n\t$0 \n" + exit 1 +fi + +MAJOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 1) +MINOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 2) + +printf "%02d%02d\\n" $MAJOR $MINOR diff --git a/qemu/roms/u-boot/scripts/checkpatch.pl b/qemu/roms/u-boot/scripts/checkpatch.pl new file mode 100755 index 000000000..3fed5e469 --- /dev/null +++ b/qemu/roms/u-boot/scripts/checkpatch.pl @@ -0,0 +1,4573 @@ +#!/usr/bin/perl -w +# (c) 2001, Dave Jones. (the file handling bit) +# (c) 2005, Joel Schopp (the ugly bit) +# (c) 2007,2008, Andy Whitcroft (new conditions, test suite) +# (c) 2008-2010 Andy Whitcroft +# Licensed under the terms of the GNU GPL License version 2 + +use strict; +use POSIX; + +my $P = $0; +$P =~ s@.*/@@g; + +my $V = '0.32'; + +use Getopt::Long qw(:config no_auto_abbrev); + +my $quiet = 0; +my $tree = 1; +my $chk_signoff = 1; +my $chk_patch = 1; +my $tst_only; +my $emacs = 0; +my $terse = 0; +my $file = 0; +my $check = 0; +my $summary = 1; +my $mailback = 0; +my $summary_file = 0; +my $show_types = 0; +my $fix = 0; +my $fix_inplace = 0; +my $root; +my %debug; +my %camelcase = (); +my %use_type = (); +my @use = (); +my %ignore_type = (); +my @ignore = (); +my $help = 0; +my $configuration_file = ".checkpatch.conf"; +my $max_line_length = 80; +my $ignore_perl_version = 0; +my $minimum_perl_version = 5.10.0; + +sub help { + my ($exitcode) = @_; + + print << "EOM"; +Usage: $P [OPTION]... [FILE]... +Version: $V + +Options: + -q, --quiet quiet + --no-tree run without a kernel tree + --no-signoff do not check for 'Signed-off-by' line + --patch treat FILE as patchfile (default) + --emacs emacs compile window format + --terse one line per report + -f, --file treat FILE as regular source file + --subjective, --strict enable more subjective tests + --types TYPE(,TYPE2...) show only these comma separated message types + --ignore TYPE(,TYPE2...) ignore various comma separated message types + --max-line-length=n set the maximum line length, if exceeded, warn + --show-types show the message "types" in the output + --root=PATH PATH to the kernel tree root + --no-summary suppress the per-file summary + --mailback only produce a report in case of warnings/errors + --summary-file include the filename in summary + --debug KEY=[0|1] turn on/off debugging of KEY, where KEY is one of + 'values', 'possible', 'type', and 'attr' (default + is all off) + --test-only=WORD report only warnings/errors containing WORD + literally + --fix EXPERIMENTAL - may create horrible results + If correctable single-line errors exist, create + ".EXPERIMENTAL-checkpatch-fixes" + with potential errors corrected to the preferred + checkpatch style + --fix-inplace EXPERIMENTAL - may create horrible results + Is the same as --fix, but overwrites the input + file. It's your fault if there's no backup or git + --ignore-perl-version override checking of perl version. expect + runtime errors. + -h, --help, --version display this help and exit + +When FILE is - read standard input. +EOM + + exit($exitcode); +} + +my $conf = which_conf($configuration_file); +if (-f $conf) { + my @conf_args; + open(my $conffile, '<', "$conf") + or warn "$P: Can't find a readable $configuration_file file $!\n"; + + while (<$conffile>) { + my $line = $_; + + $line =~ s/\s*\n?$//g; + $line =~ s/^\s*//g; + $line =~ s/\s+/ /g; + + next if ($line =~ m/^\s*#/); + next if ($line =~ m/^\s*$/); + + my @words = split(" ", $line); + foreach my $word (@words) { + last if ($word =~ m/^#/); + push (@conf_args, $word); + } + } + close($conffile); + unshift(@ARGV, @conf_args) if @conf_args; +} + +GetOptions( + 'q|quiet+' => \$quiet, + 'tree!' => \$tree, + 'signoff!' => \$chk_signoff, + 'patch!' => \$chk_patch, + 'emacs!' => \$emacs, + 'terse!' => \$terse, + 'f|file!' => \$file, + 'subjective!' => \$check, + 'strict!' => \$check, + 'ignore=s' => \@ignore, + 'types=s' => \@use, + 'show-types!' => \$show_types, + 'max-line-length=i' => \$max_line_length, + 'root=s' => \$root, + 'summary!' => \$summary, + 'mailback!' => \$mailback, + 'summary-file!' => \$summary_file, + 'fix!' => \$fix, + 'fix-inplace!' => \$fix_inplace, + 'ignore-perl-version!' => \$ignore_perl_version, + 'debug=s' => \%debug, + 'test-only=s' => \$tst_only, + 'h|help' => \$help, + 'version' => \$help +) or help(1); + +help(0) if ($help); + +$fix = 1 if ($fix_inplace); + +my $exit = 0; + +if ($^V && $^V lt $minimum_perl_version) { + printf "$P: requires at least perl version %vd\n", $minimum_perl_version; + if (!$ignore_perl_version) { + exit(1); + } +} + +if ($#ARGV < 0) { + print "$P: no input files\n"; + exit(1); +} + +sub hash_save_array_words { + my ($hashRef, $arrayRef) = @_; + + my @array = split(/,/, join(',', @$arrayRef)); + foreach my $word (@array) { + $word =~ s/\s*\n?$//g; + $word =~ s/^\s*//g; + $word =~ s/\s+/ /g; + $word =~ tr/[a-z]/[A-Z]/; + + next if ($word =~ m/^\s*#/); + next if ($word =~ m/^\s*$/); + + $hashRef->{$word}++; + } +} + +sub hash_show_words { + my ($hashRef, $prefix) = @_; + + if ($quiet == 0 && keys %$hashRef) { + print "NOTE: $prefix message types:"; + foreach my $word (sort keys %$hashRef) { + print " $word"; + } + print "\n\n"; + } +} + +hash_save_array_words(\%ignore_type, \@ignore); +hash_save_array_words(\%use_type, \@use); + +my $dbg_values = 0; +my $dbg_possible = 0; +my $dbg_type = 0; +my $dbg_attr = 0; +for my $key (keys %debug) { + ## no critic + eval "\${dbg_$key} = '$debug{$key}';"; + die "$@" if ($@); +} + +my $rpt_cleaners = 0; + +if ($terse) { + $emacs = 1; + $quiet++; +} + +if ($tree) { + if (defined $root) { + if (!top_of_kernel_tree($root)) { + die "$P: $root: --root does not point at a valid tree\n"; + } + } else { + if (top_of_kernel_tree('.')) { + $root = '.'; + } elsif ($0 =~ m@(.*)/scripts/[^/]*$@ && + top_of_kernel_tree($1)) { + $root = $1; + } + } + + if (!defined $root) { + print "Must be run from the top-level dir. of a kernel tree\n"; + exit(2); + } +} + +my $emitted_corrupt = 0; + +our $Ident = qr{ + [A-Za-z_][A-Za-z\d_]* + (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)* + }x; +our $Storage = qr{extern|static|asmlinkage}; +our $Sparse = qr{ + __user| + __kernel| + __force| + __iomem| + __must_check| + __init_refok| + __kprobes| + __ref| + __rcu + }x; +our $InitAttributePrefix = qr{__(?:mem|cpu|dev|net_|)}; +our $InitAttributeData = qr{$InitAttributePrefix(?:initdata\b)}; +our $InitAttributeConst = qr{$InitAttributePrefix(?:initconst\b)}; +our $InitAttributeInit = qr{$InitAttributePrefix(?:init\b)}; +our $InitAttribute = qr{$InitAttributeData|$InitAttributeConst|$InitAttributeInit}; + +# Notes to $Attribute: +# We need \b after 'init' otherwise 'initconst' will cause a false positive in a check +our $Attribute = qr{ + const| + __percpu| + __nocast| + __safe| + __bitwise__| + __packed__| + __packed2__| + __naked| + __maybe_unused| + __always_unused| + __noreturn| + __used| + __cold| + __noclone| + __deprecated| + __read_mostly| + __kprobes| + $InitAttribute| + ____cacheline_aligned| + ____cacheline_aligned_in_smp| + ____cacheline_internodealigned_in_smp| + __weak + }x; +our $Modifier; +our $Inline = qr{inline|__always_inline|noinline}; +our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]}; +our $Lval = qr{$Ident(?:$Member)*}; + +our $Int_type = qr{(?i)llu|ull|ll|lu|ul|l|u}; +our $Binary = qr{(?i)0b[01]+$Int_type?}; +our $Hex = qr{(?i)0x[0-9a-f]+$Int_type?}; +our $Int = qr{[0-9]+$Int_type?}; +our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?}; +our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?}; +our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?}; +our $Float = qr{$Float_hex|$Float_dec|$Float_int}; +our $Constant = qr{$Float|$Binary|$Hex|$Int}; +our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=}; +our $Compare = qr{<=|>=|==|!=|<|>}; +our $Arithmetic = qr{\+|-|\*|\/|%}; +our $Operators = qr{ + <=|>=|==|!=| + =>|->|<<|>>|<|>|!|~| + &&|\|\||,|\^|\+\+|--|&|\||$Arithmetic + }x; + +our $NonptrType; +our $NonptrTypeWithAttr; +our $Type; +our $Declare; + +our $NON_ASCII_UTF8 = qr{ + [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte + | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs + | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte + | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates + | \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3 + | [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15 + | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16 +}x; + +our $UTF8 = qr{ + [\x09\x0A\x0D\x20-\x7E] # ASCII + | $NON_ASCII_UTF8 +}x; + +our $typeTypedefs = qr{(?x: + (?:__)?(?:u|s|be|le)(?:8|16|32|64)| + atomic_t +)}; + +our $logFunctions = qr{(?x: + printk(?:_ratelimited|_once|)| + (?:[a-z0-9]+_){1,2}(?:printk|emerg|alert|crit|err|warning|warn|notice|info|debug|dbg|vdbg|devel|cont|WARN)(?:_ratelimited|_once|)| + WARN(?:_RATELIMIT|_ONCE|)| + panic| + debug| + printf| + puts| + MODULE_[A-Z_]+| + seq_vprintf|seq_printf|seq_puts +)}; + +our $signature_tags = qr{(?xi: + Signed-off-by:| + Acked-by:| + Tested-by:| + Reviewed-by:| + Reported-by:| + Suggested-by:| + To:| + Cc: +)}; + +our @typeList = ( + qr{void}, + qr{(?:unsigned\s+)?char}, + qr{(?:unsigned\s+)?short}, + qr{(?:unsigned\s+)?int}, + qr{(?:unsigned\s+)?long}, + qr{(?:unsigned\s+)?long\s+int}, + qr{(?:unsigned\s+)?long\s+long}, + qr{(?:unsigned\s+)?long\s+long\s+int}, + qr{unsigned}, + qr{float}, + qr{double}, + qr{bool}, + qr{struct\s+$Ident}, + qr{union\s+$Ident}, + qr{enum\s+$Ident}, + qr{${Ident}_t}, + qr{${Ident}_handler}, + qr{${Ident}_handler_fn}, +); +our @typeListWithAttr = ( + @typeList, + qr{struct\s+$InitAttribute\s+$Ident}, + qr{union\s+$InitAttribute\s+$Ident}, +); + +our @modifierList = ( + qr{fastcall}, +); + +our $allowed_asm_includes = qr{(?x: + irq| + memory +)}; +# memory.h: ARM has a custom one + +sub build_types { + my $mods = "(?x: \n" . join("|\n ", @modifierList) . "\n)"; + my $all = "(?x: \n" . join("|\n ", @typeList) . "\n)"; + my $allWithAttr = "(?x: \n" . join("|\n ", @typeListWithAttr) . "\n)"; + $Modifier = qr{(?:$Attribute|$Sparse|$mods)}; + $NonptrType = qr{ + (?:$Modifier\s+|const\s+)* + (?: + (?:typeof|__typeof__)\s*\([^\)]*\)| + (?:$typeTypedefs\b)| + (?:${all}\b) + ) + (?:\s+$Modifier|\s+const)* + }x; + $NonptrTypeWithAttr = qr{ + (?:$Modifier\s+|const\s+)* + (?: + (?:typeof|__typeof__)\s*\([^\)]*\)| + (?:$typeTypedefs\b)| + (?:${allWithAttr}\b) + ) + (?:\s+$Modifier|\s+const)* + }x; + $Type = qr{ + $NonptrType + (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*|\[\])+|(?:\s*\[\s*\])+)? + (?:\s+$Inline|\s+$Modifier)* + }x; + $Declare = qr{(?:$Storage\s+)?$Type}; +} +build_types(); + +our $Typecast = qr{\s*(\(\s*$NonptrType\s*\)){0,1}\s*}; + +# Using $balanced_parens, $LvalOrFunc, or $FuncArg +# requires at least perl version v5.10.0 +# Any use must be runtime checked with $^V + +our $balanced_parens = qr/(\((?:[^\(\)]++|(?-1))*\))/; +our $LvalOrFunc = qr{($Lval)\s*($balanced_parens{0,1})\s*}; +our $FuncArg = qr{$Typecast{0,1}($LvalOrFunc|$Constant)}; + +sub deparenthesize { + my ($string) = @_; + return "" if (!defined($string)); + $string =~ s@^\s*\(\s*@@g; + $string =~ s@\s*\)\s*$@@g; + $string =~ s@\s+@ @g; + return $string; +} + +sub seed_camelcase_file { + my ($file) = @_; + + return if (!(-f $file)); + + local $/; + + open(my $include_file, '<', "$file") + or warn "$P: Can't read '$file' $!\n"; + my $text = <$include_file>; + close($include_file); + + my @lines = split('\n', $text); + + foreach my $line (@lines) { + next if ($line !~ /(?:[A-Z][a-z]|[a-z][A-Z])/); + if ($line =~ /^[ \t]*(?:#[ \t]*define|typedef\s+$Type)\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)/) { + $camelcase{$1} = 1; + } elsif ($line =~ /^\s*$Declare\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)\s*[\(\[,;]/) { + $camelcase{$1} = 1; + } elsif ($line =~ /^\s*(?:union|struct|enum)\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)\s*[;\{]/) { + $camelcase{$1} = 1; + } + } +} + +my $camelcase_seeded = 0; +sub seed_camelcase_includes { + return if ($camelcase_seeded); + + my $files; + my $camelcase_cache = ""; + my @include_files = (); + + $camelcase_seeded = 1; + + if (-e ".git") { + my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`; + chomp $git_last_include_commit; + $camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit"; + } else { + my $last_mod_date = 0; + $files = `find $root/include -name "*.h"`; + @include_files = split('\n', $files); + foreach my $file (@include_files) { + my $date = POSIX::strftime("%Y%m%d%H%M", + localtime((stat $file)[9])); + $last_mod_date = $date if ($last_mod_date < $date); + } + $camelcase_cache = ".checkpatch-camelcase.date.$last_mod_date"; + } + + if ($camelcase_cache ne "" && -f $camelcase_cache) { + open(my $camelcase_file, '<', "$camelcase_cache") + or warn "$P: Can't read '$camelcase_cache' $!\n"; + while (<$camelcase_file>) { + chomp; + $camelcase{$_} = 1; + } + close($camelcase_file); + + return; + } + + if (-e ".git") { + $files = `git ls-files "include/*.h"`; + @include_files = split('\n', $files); + } + + foreach my $file (@include_files) { + seed_camelcase_file($file); + } + + if ($camelcase_cache ne "") { + unlink glob ".checkpatch-camelcase.*"; + open(my $camelcase_file, '>', "$camelcase_cache") + or warn "$P: Can't write '$camelcase_cache' $!\n"; + foreach (sort { lc($a) cmp lc($b) } keys(%camelcase)) { + print $camelcase_file ("$_\n"); + } + close($camelcase_file); + } +} + +$chk_signoff = 0 if ($file); + +my @rawlines = (); +my @lines = (); +my @fixed = (); +my $vname; +for my $filename (@ARGV) { + my $FILE; + if ($file) { + open($FILE, '-|', "diff -u /dev/null $filename") || + die "$P: $filename: diff failed - $!\n"; + } elsif ($filename eq '-') { + open($FILE, '<&STDIN'); + } else { + open($FILE, '<', "$filename") || + die "$P: $filename: open failed - $!\n"; + } + if ($filename eq '-') { + $vname = 'Your patch'; + } else { + $vname = $filename; + } + while (<$FILE>) { + chomp; + push(@rawlines, $_); + } + close($FILE); + if (!process($filename)) { + $exit = 1; + } + @rawlines = (); + @lines = (); + @fixed = (); +} + +exit($exit); + +sub top_of_kernel_tree { + my ($root) = @_; + + my @tree_check = ( + "COPYING", "CREDITS", "Kbuild", "MAINTAINERS", "Makefile", + "README", "Documentation", "arch", "include", "drivers", + "fs", "init", "ipc", "kernel", "lib", "scripts", + ); + + foreach my $check (@tree_check) { + if (! -e $root . '/' . $check) { + return 0; + } + } + return 1; +} + +sub parse_email { + my ($formatted_email) = @_; + + my $name = ""; + my $address = ""; + my $comment = ""; + + if ($formatted_email =~ /^(.*)<(\S+\@\S+)>(.*)$/) { + $name = $1; + $address = $2; + $comment = $3 if defined $3; + } elsif ($formatted_email =~ /^\s*<(\S+\@\S+)>(.*)$/) { + $address = $1; + $comment = $2 if defined $2; + } elsif ($formatted_email =~ /(\S+\@\S+)(.*)$/) { + $address = $1; + $comment = $2 if defined $2; + $formatted_email =~ s/$address.*$//; + $name = $formatted_email; + $name = trim($name); + $name =~ s/^\"|\"$//g; + # If there's a name left after stripping spaces and + # leading quotes, and the address doesn't have both + # leading and trailing angle brackets, the address + # is invalid. ie: + # "joe smith joe@smith.com" bad + # "joe smith ]+>$/) { + $name = ""; + $address = ""; + $comment = ""; + } + } + + $name = trim($name); + $name =~ s/^\"|\"$//g; + $address = trim($address); + $address =~ s/^\<|\>$//g; + + if ($name =~ /[^\w \-]/i) { ##has "must quote" chars + $name =~ s/(?"; + } + + return $formatted_email; +} + +sub which_conf { + my ($conf) = @_; + + foreach my $path (split(/:/, ".:$ENV{HOME}:.scripts")) { + if (-e "$path/$conf") { + return "$path/$conf"; + } + } + + return ""; +} + +sub expand_tabs { + my ($str) = @_; + + my $res = ''; + my $n = 0; + for my $c (split(//, $str)) { + if ($c eq "\t") { + $res .= ' '; + $n++; + for (; ($n % 8) != 0; $n++) { + $res .= ' '; + } + next; + } + $res .= $c; + $n++; + } + + return $res; +} +sub copy_spacing { + (my $res = shift) =~ tr/\t/ /c; + return $res; +} + +sub line_stats { + my ($line) = @_; + + # Drop the diff line leader and expand tabs + $line =~ s/^.//; + $line = expand_tabs($line); + + # Pick the indent from the front of the line. + my ($white) = ($line =~ /^(\s*)/); + + return (length($line), length($white)); +} + +my $sanitise_quote = ''; + +sub sanitise_line_reset { + my ($in_comment) = @_; + + if ($in_comment) { + $sanitise_quote = '*/'; + } else { + $sanitise_quote = ''; + } +} +sub sanitise_line { + my ($line) = @_; + + my $res = ''; + my $l = ''; + + my $qlen = 0; + my $off = 0; + my $c; + + # Always copy over the diff marker. + $res = substr($line, 0, 1); + + for ($off = 1; $off < length($line); $off++) { + $c = substr($line, $off, 1); + + # Comments we are wacking completly including the begin + # and end, all to $;. + if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') { + $sanitise_quote = '*/'; + + substr($res, $off, 2, "$;$;"); + $off++; + next; + } + if ($sanitise_quote eq '*/' && substr($line, $off, 2) eq '*/') { + $sanitise_quote = ''; + substr($res, $off, 2, "$;$;"); + $off++; + next; + } + if ($sanitise_quote eq '' && substr($line, $off, 2) eq '//') { + $sanitise_quote = '//'; + + substr($res, $off, 2, $sanitise_quote); + $off++; + next; + } + + # A \ in a string means ignore the next character. + if (($sanitise_quote eq "'" || $sanitise_quote eq '"') && + $c eq "\\") { + substr($res, $off, 2, 'XX'); + $off++; + next; + } + # Regular quotes. + if ($c eq "'" || $c eq '"') { + if ($sanitise_quote eq '') { + $sanitise_quote = $c; + + substr($res, $off, 1, $c); + next; + } elsif ($sanitise_quote eq $c) { + $sanitise_quote = ''; + } + } + + #print "c<$c> SQ<$sanitise_quote>\n"; + if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") { + substr($res, $off, 1, $;); + } elsif ($off != 0 && $sanitise_quote eq '//' && $c ne "\t") { + substr($res, $off, 1, $;); + } elsif ($off != 0 && $sanitise_quote && $c ne "\t") { + substr($res, $off, 1, 'X'); + } else { + substr($res, $off, 1, $c); + } + } + + if ($sanitise_quote eq '//') { + $sanitise_quote = ''; + } + + # The pathname on a #include may be surrounded by '<' and '>'. + if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) { + my $clean = 'X' x length($1); + $res =~ s@\<.*\>@<$clean>@; + + # The whole of a #error is a string. + } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) { + my $clean = 'X' x length($1); + $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@; + } + + return $res; +} + +sub get_quoted_string { + my ($line, $rawline) = @_; + + return "" if ($line !~ m/(\"[X]+\")/g); + return substr($rawline, $-[0], $+[0] - $-[0]); +} + +sub ctx_statement_block { + my ($linenr, $remain, $off) = @_; + my $line = $linenr - 1; + my $blk = ''; + my $soff = $off; + my $coff = $off - 1; + my $coff_set = 0; + + my $loff = 0; + + my $type = ''; + my $level = 0; + my @stack = (); + my $p; + my $c; + my $len = 0; + + my $remainder; + while (1) { + @stack = (['', 0]) if ($#stack == -1); + + #warn "CSB: blk<$blk> remain<$remain>\n"; + # If we are about to drop off the end, pull in more + # context. + if ($off >= $len) { + for (; $remain > 0; $line++) { + last if (!defined $lines[$line]); + next if ($lines[$line] =~ /^-/); + $remain--; + $loff = $len; + $blk .= $lines[$line] . "\n"; + $len = length($blk); + $line++; + last; + } + # Bail if there is no further context. + #warn "CSB: blk<$blk> off<$off> len<$len>\n"; + if ($off >= $len) { + last; + } + if ($level == 0 && substr($blk, $off) =~ /^.\s*#\s*define/) { + $level++; + $type = '#'; + } + } + $p = $c; + $c = substr($blk, $off, 1); + $remainder = substr($blk, $off); + + #warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n"; + + # Handle nested #if/#else. + if ($remainder =~ /^#\s*(?:ifndef|ifdef|if)\s/) { + push(@stack, [ $type, $level ]); + } elsif ($remainder =~ /^#\s*(?:else|elif)\b/) { + ($type, $level) = @{$stack[$#stack - 1]}; + } elsif ($remainder =~ /^#\s*endif\b/) { + ($type, $level) = @{pop(@stack)}; + } + + # Statement ends at the ';' or a close '}' at the + # outermost level. + if ($level == 0 && $c eq ';') { + last; + } + + # An else is really a conditional as long as its not else if + if ($level == 0 && $coff_set == 0 && + (!defined($p) || $p =~ /(?:\s|\}|\+)/) && + $remainder =~ /^(else)(?:\s|{)/ && + $remainder !~ /^else\s+if\b/) { + $coff = $off + length($1) - 1; + $coff_set = 1; + #warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n"; + #warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n"; + } + + if (($type eq '' || $type eq '(') && $c eq '(') { + $level++; + $type = '('; + } + if ($type eq '(' && $c eq ')') { + $level--; + $type = ($level != 0)? '(' : ''; + + if ($level == 0 && $coff < $soff) { + $coff = $off; + $coff_set = 1; + #warn "CSB: mark coff<$coff>\n"; + } + } + if (($type eq '' || $type eq '{') && $c eq '{') { + $level++; + $type = '{'; + } + if ($type eq '{' && $c eq '}') { + $level--; + $type = ($level != 0)? '{' : ''; + + if ($level == 0) { + if (substr($blk, $off + 1, 1) eq ';') { + $off++; + } + last; + } + } + # Preprocessor commands end at the newline unless escaped. + if ($type eq '#' && $c eq "\n" && $p ne "\\") { + $level--; + $type = ''; + $off++; + last; + } + $off++; + } + # We are truly at the end, so shuffle to the next line. + if ($off == $len) { + $loff = $len + 1; + $line++; + $remain--; + } + + my $statement = substr($blk, $soff, $off - $soff + 1); + my $condition = substr($blk, $soff, $coff - $soff + 1); + + #warn "STATEMENT<$statement>\n"; + #warn "CONDITION<$condition>\n"; + + #print "coff<$coff> soff<$off> loff<$loff>\n"; + + return ($statement, $condition, + $line, $remain + 1, $off - $loff + 1, $level); +} + +sub statement_lines { + my ($stmt) = @_; + + # Strip the diff line prefixes and rip blank lines at start and end. + $stmt =~ s/(^|\n)./$1/g; + $stmt =~ s/^\s*//; + $stmt =~ s/\s*$//; + + my @stmt_lines = ($stmt =~ /\n/g); + + return $#stmt_lines + 2; +} + +sub statement_rawlines { + my ($stmt) = @_; + + my @stmt_lines = ($stmt =~ /\n/g); + + return $#stmt_lines + 2; +} + +sub statement_block_size { + my ($stmt) = @_; + + $stmt =~ s/(^|\n)./$1/g; + $stmt =~ s/^\s*{//; + $stmt =~ s/}\s*$//; + $stmt =~ s/^\s*//; + $stmt =~ s/\s*$//; + + my @stmt_lines = ($stmt =~ /\n/g); + my @stmt_statements = ($stmt =~ /;/g); + + my $stmt_lines = $#stmt_lines + 2; + my $stmt_statements = $#stmt_statements + 1; + + if ($stmt_lines > $stmt_statements) { + return $stmt_lines; + } else { + return $stmt_statements; + } +} + +sub ctx_statement_full { + my ($linenr, $remain, $off) = @_; + my ($statement, $condition, $level); + + my (@chunks); + + # Grab the first conditional/block pair. + ($statement, $condition, $linenr, $remain, $off, $level) = + ctx_statement_block($linenr, $remain, $off); + #print "F: c<$condition> s<$statement> remain<$remain>\n"; + push(@chunks, [ $condition, $statement ]); + if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) { + return ($level, $linenr, @chunks); + } + + # Pull in the following conditional/block pairs and see if they + # could continue the statement. + for (;;) { + ($statement, $condition, $linenr, $remain, $off, $level) = + ctx_statement_block($linenr, $remain, $off); + #print "C: c<$condition> s<$statement> remain<$remain>\n"; + last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s)); + #print "C: push\n"; + push(@chunks, [ $condition, $statement ]); + } + + return ($level, $linenr, @chunks); +} + +sub ctx_block_get { + my ($linenr, $remain, $outer, $open, $close, $off) = @_; + my $line; + my $start = $linenr - 1; + my $blk = ''; + my @o; + my @c; + my @res = (); + + my $level = 0; + my @stack = ($level); + for ($line = $start; $remain > 0; $line++) { + next if ($rawlines[$line] =~ /^-/); + $remain--; + + $blk .= $rawlines[$line]; + + # Handle nested #if/#else. + if ($lines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) { + push(@stack, $level); + } elsif ($lines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) { + $level = $stack[$#stack - 1]; + } elsif ($lines[$line] =~ /^.\s*#\s*endif\b/) { + $level = pop(@stack); + } + + foreach my $c (split(//, $lines[$line])) { + ##print "C<$c>L<$level><$open$close>O<$off>\n"; + if ($off > 0) { + $off--; + next; + } + + if ($c eq $close && $level > 0) { + $level--; + last if ($level == 0); + } elsif ($c eq $open) { + $level++; + } + } + + if (!$outer || $level <= 1) { + push(@res, $rawlines[$line]); + } + + last if ($level == 0); + } + + return ($level, @res); +} +sub ctx_block_outer { + my ($linenr, $remain) = @_; + + my ($level, @r) = ctx_block_get($linenr, $remain, 1, '{', '}', 0); + return @r; +} +sub ctx_block { + my ($linenr, $remain) = @_; + + my ($level, @r) = ctx_block_get($linenr, $remain, 0, '{', '}', 0); + return @r; +} +sub ctx_statement { + my ($linenr, $remain, $off) = @_; + + my ($level, @r) = ctx_block_get($linenr, $remain, 0, '(', ')', $off); + return @r; +} +sub ctx_block_level { + my ($linenr, $remain) = @_; + + return ctx_block_get($linenr, $remain, 0, '{', '}', 0); +} +sub ctx_statement_level { + my ($linenr, $remain, $off) = @_; + + return ctx_block_get($linenr, $remain, 0, '(', ')', $off); +} + +sub ctx_locate_comment { + my ($first_line, $end_line) = @_; + + # Catch a comment on the end of the line itself. + my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@); + return $current_comment if (defined $current_comment); + + # Look through the context and try and figure out if there is a + # comment. + my $in_comment = 0; + $current_comment = ''; + for (my $linenr = $first_line; $linenr < $end_line; $linenr++) { + my $line = $rawlines[$linenr - 1]; + #warn " $line\n"; + if ($linenr == $first_line and $line =~ m@^.\s*\*@) { + $in_comment = 1; + } + if ($line =~ m@/\*@) { + $in_comment = 1; + } + if (!$in_comment && $current_comment ne '') { + $current_comment = ''; + } + $current_comment .= $line . "\n" if ($in_comment); + if ($line =~ m@\*/@) { + $in_comment = 0; + } + } + + chomp($current_comment); + return($current_comment); +} +sub ctx_has_comment { + my ($first_line, $end_line) = @_; + my $cmt = ctx_locate_comment($first_line, $end_line); + + ##print "LINE: $rawlines[$end_line - 1 ]\n"; + ##print "CMMT: $cmt\n"; + + return ($cmt ne ''); +} + +sub raw_line { + my ($linenr, $cnt) = @_; + + my $offset = $linenr - 1; + $cnt++; + + my $line; + while ($cnt) { + $line = $rawlines[$offset++]; + next if (defined($line) && $line =~ /^-/); + $cnt--; + } + + return $line; +} + +sub cat_vet { + my ($vet) = @_; + my ($res, $coded); + + $res = ''; + while ($vet =~ /([^[:cntrl:]]*)([[:cntrl:]]|$)/g) { + $res .= $1; + if ($2 ne '') { + $coded = sprintf("^%c", unpack('C', $2) + 64); + $res .= $coded; + } + } + $res =~ s/$/\$/; + + return $res; +} + +my $av_preprocessor = 0; +my $av_pending; +my @av_paren_type; +my $av_pend_colon; + +sub annotate_reset { + $av_preprocessor = 0; + $av_pending = '_'; + @av_paren_type = ('E'); + $av_pend_colon = 'O'; +} + +sub annotate_values { + my ($stream, $type) = @_; + + my $res; + my $var = '_' x length($stream); + my $cur = $stream; + + print "$stream\n" if ($dbg_values > 1); + + while (length($cur)) { + @av_paren_type = ('E') if ($#av_paren_type < 0); + print " <" . join('', @av_paren_type) . + "> <$type> <$av_pending>" if ($dbg_values > 1); + if ($cur =~ /^(\s+)/o) { + print "WS($1)\n" if ($dbg_values > 1); + if ($1 =~ /\n/ && $av_preprocessor) { + $type = pop(@av_paren_type); + $av_preprocessor = 0; + } + + } elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') { + print "CAST($1)\n" if ($dbg_values > 1); + push(@av_paren_type, $type); + $type = 'c'; + + } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) { + print "DECLARE($1)\n" if ($dbg_values > 1); + $type = 'T'; + + } elsif ($cur =~ /^($Modifier)\s*/) { + print "MODIFIER($1)\n" if ($dbg_values > 1); + $type = 'T'; + + } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) { + print "DEFINE($1,$2)\n" if ($dbg_values > 1); + $av_preprocessor = 1; + push(@av_paren_type, $type); + if ($2 ne '') { + $av_pending = 'N'; + } + $type = 'E'; + + } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) { + print "UNDEF($1)\n" if ($dbg_values > 1); + $av_preprocessor = 1; + push(@av_paren_type, $type); + + } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) { + print "PRE_START($1)\n" if ($dbg_values > 1); + $av_preprocessor = 1; + + push(@av_paren_type, $type); + push(@av_paren_type, $type); + $type = 'E'; + + } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) { + print "PRE_RESTART($1)\n" if ($dbg_values > 1); + $av_preprocessor = 1; + + push(@av_paren_type, $av_paren_type[$#av_paren_type]); + + $type = 'E'; + + } elsif ($cur =~ /^(\#\s*(?:endif))/o) { + print "PRE_END($1)\n" if ($dbg_values > 1); + + $av_preprocessor = 1; + + # Assume all arms of the conditional end as this + # one does, and continue as if the #endif was not here. + pop(@av_paren_type); + push(@av_paren_type, $type); + $type = 'E'; + + } elsif ($cur =~ /^(\\\n)/o) { + print "PRECONT($1)\n" if ($dbg_values > 1); + + } elsif ($cur =~ /^(__attribute__)\s*\(?/o) { + print "ATTR($1)\n" if ($dbg_values > 1); + $av_pending = $type; + $type = 'N'; + + } elsif ($cur =~ /^(sizeof)\s*(\()?/o) { + print "SIZEOF($1)\n" if ($dbg_values > 1); + if (defined $2) { + $av_pending = 'V'; + } + $type = 'N'; + + } elsif ($cur =~ /^(if|while|for)\b/o) { + print "COND($1)\n" if ($dbg_values > 1); + $av_pending = 'E'; + $type = 'N'; + + } elsif ($cur =~/^(case)/o) { + print "CASE($1)\n" if ($dbg_values > 1); + $av_pend_colon = 'C'; + $type = 'N'; + + } elsif ($cur =~/^(return|else|goto|typeof|__typeof__)\b/o) { + print "KEYWORD($1)\n" if ($dbg_values > 1); + $type = 'N'; + + } elsif ($cur =~ /^(\()/o) { + print "PAREN('$1')\n" if ($dbg_values > 1); + push(@av_paren_type, $av_pending); + $av_pending = '_'; + $type = 'N'; + + } elsif ($cur =~ /^(\))/o) { + my $new_type = pop(@av_paren_type); + if ($new_type ne '_') { + $type = $new_type; + print "PAREN('$1') -> $type\n" + if ($dbg_values > 1); + } else { + print "PAREN('$1')\n" if ($dbg_values > 1); + } + + } elsif ($cur =~ /^($Ident)\s*\(/o) { + print "FUNC($1)\n" if ($dbg_values > 1); + $type = 'V'; + $av_pending = 'V'; + + } elsif ($cur =~ /^($Ident\s*):(?:\s*\d+\s*(,|=|;))?/) { + if (defined $2 && $type eq 'C' || $type eq 'T') { + $av_pend_colon = 'B'; + } elsif ($type eq 'E') { + $av_pend_colon = 'L'; + } + print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1); + $type = 'V'; + + } elsif ($cur =~ /^($Ident|$Constant)/o) { + print "IDENT($1)\n" if ($dbg_values > 1); + $type = 'V'; + + } elsif ($cur =~ /^($Assignment)/o) { + print "ASSIGN($1)\n" if ($dbg_values > 1); + $type = 'N'; + + } elsif ($cur =~/^(;|{|})/) { + print "END($1)\n" if ($dbg_values > 1); + $type = 'E'; + $av_pend_colon = 'O'; + + } elsif ($cur =~/^(,)/) { + print "COMMA($1)\n" if ($dbg_values > 1); + $type = 'C'; + + } elsif ($cur =~ /^(\?)/o) { + print "QUESTION($1)\n" if ($dbg_values > 1); + $type = 'N'; + + } elsif ($cur =~ /^(:)/o) { + print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1); + + substr($var, length($res), 1, $av_pend_colon); + if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') { + $type = 'E'; + } else { + $type = 'N'; + } + $av_pend_colon = 'O'; + + } elsif ($cur =~ /^(\[)/o) { + print "CLOSE($1)\n" if ($dbg_values > 1); + $type = 'N'; + + } elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&\&|\&)/o) { + my $variant; + + print "OPV($1)\n" if ($dbg_values > 1); + if ($type eq 'V') { + $variant = 'B'; + } else { + $variant = 'U'; + } + + substr($var, length($res), 1, $variant); + $type = 'N'; + + } elsif ($cur =~ /^($Operators)/o) { + print "OP($1)\n" if ($dbg_values > 1); + if ($1 ne '++' && $1 ne '--') { + $type = 'N'; + } + + } elsif ($cur =~ /(^.)/o) { + print "C($1)\n" if ($dbg_values > 1); + } + if (defined $1) { + $cur = substr($cur, length($1)); + $res .= $type x length($1); + } + } + + return ($res, $var); +} + +sub possible { + my ($possible, $line) = @_; + my $notPermitted = qr{(?: + ^(?: + $Modifier| + $Storage| + $Type| + DEFINE_\S+ + )$| + ^(?: + goto| + return| + case| + else| + asm|__asm__| + do| + \#| + \#\#| + )(?:\s|$)| + ^(?:typedef|struct|enum)\b + )}x; + warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); + if ($possible !~ $notPermitted) { + # Check for modifiers. + $possible =~ s/\s*$Storage\s*//g; + $possible =~ s/\s*$Sparse\s*//g; + if ($possible =~ /^\s*$/) { + + } elsif ($possible =~ /\s/) { + $possible =~ s/\s*$Type\s*//g; + for my $modifier (split(' ', $possible)) { + if ($modifier !~ $notPermitted) { + warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); + push(@modifierList, $modifier); + } + } + + } else { + warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); + push(@typeList, $possible); + } + build_types(); + } else { + warn "NOTPOSS: $possible ($line)\n" if ($dbg_possible > 1); + } +} + +my $prefix = ''; + +sub show_type { + return defined $use_type{$_[0]} if (scalar keys %use_type > 0); + + return !defined $ignore_type{$_[0]}; +} + +sub report { + if (!show_type($_[1]) || + (defined $tst_only && $_[2] !~ /\Q$tst_only\E/)) { + return 0; + } + my $line; + if ($show_types) { + $line = "$prefix$_[0]:$_[1]: $_[2]\n"; + } else { + $line = "$prefix$_[0]: $_[2]\n"; + } + $line = (split('\n', $line))[0] . "\n" if ($terse); + + push(our @report, $line); + + return 1; +} +sub report_dump { + our @report; +} + +sub ERROR { + if (report("ERROR", $_[0], $_[1])) { + our $clean = 0; + our $cnt_error++; + return 1; + } + return 0; +} +sub WARN { + if (report("WARNING", $_[0], $_[1])) { + our $clean = 0; + our $cnt_warn++; + return 1; + } + return 0; +} +sub CHK { + if ($check && report("CHECK", $_[0], $_[1])) { + our $clean = 0; + our $cnt_chk++; + return 1; + } + return 0; +} + +sub check_absolute_file { + my ($absolute, $herecurr) = @_; + my $file = $absolute; + + ##print "absolute<$absolute>\n"; + + # See if any suffix of this path is a path within the tree. + while ($file =~ s@^[^/]*/@@) { + if (-f "$root/$file") { + ##print "file<$file>\n"; + last; + } + } + if (! -f _) { + return 0; + } + + # It is, so see if the prefix is acceptable. + my $prefix = $absolute; + substr($prefix, -length($file)) = ''; + + ##print "prefix<$prefix>\n"; + if ($prefix ne ".../") { + WARN("USE_RELATIVE_PATH", + "use relative pathname instead of absolute in changelog text\n" . $herecurr); + } +} + +sub trim { + my ($string) = @_; + + $string =~ s/^\s+|\s+$//g; + + return $string; +} + +sub ltrim { + my ($string) = @_; + + $string =~ s/^\s+//; + + return $string; +} + +sub rtrim { + my ($string) = @_; + + $string =~ s/\s+$//; + + return $string; +} + +sub string_find_replace { + my ($string, $find, $replace) = @_; + + $string =~ s/$find/$replace/g; + + return $string; +} + +sub tabify { + my ($leading) = @_; + + my $source_indent = 8; + my $max_spaces_before_tab = $source_indent - 1; + my $spaces_to_tab = " " x $source_indent; + + #convert leading spaces to tabs + 1 while $leading =~ s@^([\t]*)$spaces_to_tab@$1\t@g; + #Remove spaces before a tab + 1 while $leading =~ s@^([\t]*)( {1,$max_spaces_before_tab})\t@$1\t@g; + + return "$leading"; +} + +sub pos_last_openparen { + my ($line) = @_; + + my $pos = 0; + + my $opens = $line =~ tr/\(/\(/; + my $closes = $line =~ tr/\)/\)/; + + my $last_openparen = 0; + + if (($opens == 0) || ($closes >= $opens)) { + return -1; + } + + my $len = length($line); + + for ($pos = 0; $pos < $len; $pos++) { + my $string = substr($line, $pos); + if ($string =~ /^($FuncArg|$balanced_parens)/) { + $pos += length($1) - 1; + } elsif (substr($line, $pos, 1) eq '(') { + $last_openparen = $pos; + } elsif (index($string, '(') == -1) { + last; + } + } + + return $last_openparen + 1; +} + +sub process { + my $filename = shift; + + my $linenr=0; + my $prevline=""; + my $prevrawline=""; + my $stashline=""; + my $stashrawline=""; + + my $length; + my $indent; + my $previndent=0; + my $stashindent=0; + + our $clean = 1; + my $signoff = 0; + my $is_patch = 0; + + my $in_header_lines = 1; + my $in_commit_log = 0; #Scanning lines before patch + + my $non_utf8_charset = 0; + + our @report = (); + our $cnt_lines = 0; + our $cnt_error = 0; + our $cnt_warn = 0; + our $cnt_chk = 0; + + # Trace the real file/line as we go. + my $realfile = ''; + my $realline = 0; + my $realcnt = 0; + my $here = ''; + my $in_comment = 0; + my $comment_edge = 0; + my $first_line = 0; + my $p1_prefix = ''; + + my $prev_values = 'E'; + + # suppression flags + my %suppress_ifbraces; + my %suppress_whiletrailers; + my %suppress_export; + my $suppress_statement = 0; + + my %signatures = (); + + # Pre-scan the patch sanitizing the lines. + # Pre-scan the patch looking for any __setup documentation. + # + my @setup_docs = (); + my $setup_docs = 0; + + my $camelcase_file_seeded = 0; + + sanitise_line_reset(); + my $line; + foreach my $rawline (@rawlines) { + $linenr++; + $line = $rawline; + + push(@fixed, $rawline) if ($fix); + + if ($rawline=~/^\+\+\+\s+(\S+)/) { + $setup_docs = 0; + if ($1 =~ m@Documentation/kernel-parameters.txt$@) { + $setup_docs = 1; + } + #next; + } + if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { + $realline=$1-1; + if (defined $2) { + $realcnt=$3+1; + } else { + $realcnt=1+1; + } + $in_comment = 0; + + # Guestimate if this is a continuing comment. Run + # the context looking for a comment "edge". If this + # edge is a close comment then we must be in a comment + # at context start. + my $edge; + my $cnt = $realcnt; + for (my $ln = $linenr + 1; $cnt > 0; $ln++) { + next if (defined $rawlines[$ln - 1] && + $rawlines[$ln - 1] =~ /^-/); + $cnt--; + #print "RAW<$rawlines[$ln - 1]>\n"; + last if (!defined $rawlines[$ln - 1]); + if ($rawlines[$ln - 1] =~ m@(/\*|\*/)@ && + $rawlines[$ln - 1] !~ m@"[^"]*(?:/\*|\*/)[^"]*"@) { + ($edge) = $1; + last; + } + } + if (defined $edge && $edge eq '*/') { + $in_comment = 1; + } + + # Guestimate if this is a continuing comment. If this + # is the start of a diff block and this line starts + # ' *' then it is very likely a comment. + if (!defined $edge && + $rawlines[$linenr] =~ m@^.\s*(?:\*\*+| \*)(?:\s|$)@) + { + $in_comment = 1; + } + + ##print "COMMENT:$in_comment edge<$edge> $rawline\n"; + sanitise_line_reset($in_comment); + + } elsif ($realcnt && $rawline =~ /^(?:\+| |$)/) { + # Standardise the strings and chars within the input to + # simplify matching -- only bother with positive lines. + $line = sanitise_line($rawline); + } + push(@lines, $line); + + if ($realcnt > 1) { + $realcnt-- if ($line =~ /^(?:\+| |$)/); + } else { + $realcnt = 0; + } + + #print "==>$rawline\n"; + #print "-->$line\n"; + + if ($setup_docs && $line =~ /^\+/) { + push(@setup_docs, $line); + } + } + + $prefix = ''; + + $realcnt = 0; + $linenr = 0; + foreach my $line (@lines) { + $linenr++; + my $sline = $line; #copy of $line + $sline =~ s/$;/ /g; #with comments as spaces + + my $rawline = $rawlines[$linenr - 1]; + +#extract the line range in the file after the patch is applied + if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { + $is_patch = 1; + $first_line = $linenr + 1; + $realline=$1-1; + if (defined $2) { + $realcnt=$3+1; + } else { + $realcnt=1+1; + } + annotate_reset(); + $prev_values = 'E'; + + %suppress_ifbraces = (); + %suppress_whiletrailers = (); + %suppress_export = (); + $suppress_statement = 0; + next; + +# track the line number as we move through the hunk, note that +# new versions of GNU diff omit the leading space on completely +# blank context lines so we need to count that too. + } elsif ($line =~ /^( |\+|$)/) { + $realline++; + $realcnt-- if ($realcnt != 0); + + # Measure the line length and indent. + ($length, $indent) = line_stats($rawline); + + # Track the previous line. + ($prevline, $stashline) = ($stashline, $line); + ($previndent, $stashindent) = ($stashindent, $indent); + ($prevrawline, $stashrawline) = ($stashrawline, $rawline); + + #warn "line<$line>\n"; + + } elsif ($realcnt == 1) { + $realcnt--; + } + + my $hunk_line = ($realcnt != 0); + +#make up the handle for any error we report on this line + $prefix = "$filename:$realline: " if ($emacs && $file); + $prefix = "$filename:$linenr: " if ($emacs && !$file); + + $here = "#$linenr: " if (!$file); + $here = "#$realline: " if ($file); + + # extract the filename as it passes + if ($line =~ /^diff --git.*?(\S+)$/) { + $realfile = $1; + $realfile =~ s@^([^/]*)/@@ if (!$file); + $in_commit_log = 0; + } elsif ($line =~ /^\+\+\+\s+(\S+)/) { + $realfile = $1; + $realfile =~ s@^([^/]*)/@@ if (!$file); + $in_commit_log = 0; + + $p1_prefix = $1; + if (!$file && $tree && $p1_prefix ne '' && + -e "$root/$p1_prefix") { + WARN("PATCH_PREFIX", + "patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n"); + } + + if ($realfile =~ m@^include/asm/@) { + ERROR("MODIFIED_INCLUDE_ASM", + "do not modify files in include/asm, change architecture specific files in include/asm-\n" . "$here$rawline\n"); + } + next; + } + + $here .= "FILE: $realfile:$realline:" if ($realcnt != 0); + + my $hereline = "$here\n$rawline\n"; + my $herecurr = "$here\n$rawline\n"; + my $hereprev = "$here\n$prevrawline\n$rawline\n"; + + $cnt_lines++ if ($realcnt != 0); + +# Check for incorrect file permissions + if ($line =~ /^new (file )?mode.*[7531]\d{0,2}$/) { + my $permhere = $here . "FILE: $realfile\n"; + if ($realfile !~ m@scripts/@ && + $realfile !~ /\.(py|pl|awk|sh)$/) { + ERROR("EXECUTE_PERMISSIONS", + "do not set execute permissions for source files\n" . $permhere); + } + } + +# Check the patch for a signoff: + if ($line =~ /^\s*signed-off-by:/i) { + $signoff++; + $in_commit_log = 0; + } + +# Check signature styles + if (!$in_header_lines && + $line =~ /^(\s*)([a-z0-9_-]+by:|$signature_tags)(\s*)(.*)/i) { + my $space_before = $1; + my $sign_off = $2; + my $space_after = $3; + my $email = $4; + my $ucfirst_sign_off = ucfirst(lc($sign_off)); + + if ($sign_off !~ /$signature_tags/) { + WARN("BAD_SIGN_OFF", + "Non-standard signature: $sign_off\n" . $herecurr); + } + if (defined $space_before && $space_before ne "") { + if (WARN("BAD_SIGN_OFF", + "Do not use whitespace before $ucfirst_sign_off\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] = + "$ucfirst_sign_off $email"; + } + } + if ($sign_off =~ /-by:$/i && $sign_off ne $ucfirst_sign_off) { + if (WARN("BAD_SIGN_OFF", + "'$ucfirst_sign_off' is the preferred signature form\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] = + "$ucfirst_sign_off $email"; + } + + } + if (!defined $space_after || $space_after ne " ") { + if (WARN("BAD_SIGN_OFF", + "Use a single space after $ucfirst_sign_off\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] = + "$ucfirst_sign_off $email"; + } + } + + my ($email_name, $email_address, $comment) = parse_email($email); + my $suggested_email = format_email(($email_name, $email_address)); + if ($suggested_email eq "") { + ERROR("BAD_SIGN_OFF", + "Unrecognized email address: '$email'\n" . $herecurr); + } else { + my $dequoted = $suggested_email; + $dequoted =~ s/^"//; + $dequoted =~ s/" $comment" ne $email && + "$suggested_email$comment" ne $email) { + WARN("BAD_SIGN_OFF", + "email address '$email' might be better as '$suggested_email$comment'\n" . $herecurr); + } + } + +# Check for duplicate signatures + my $sig_nospace = $line; + $sig_nospace =~ s/\s//g; + $sig_nospace = lc($sig_nospace); + if (defined $signatures{$sig_nospace}) { + WARN("BAD_SIGN_OFF", + "Duplicate signature\n" . $herecurr); + } else { + $signatures{$sig_nospace} = 1; + } + } + +# Check for wrappage within a valid hunk of the file + if ($realcnt != 0 && $line !~ m{^(?:\+|-| |\\ No newline|$)}) { + ERROR("CORRUPTED_PATCH", + "patch seems to be corrupt (line wrapped?)\n" . + $herecurr) if (!$emitted_corrupt++); + } + +# Check for absolute kernel paths. + if ($tree) { + while ($line =~ m{(?:^|\s)(/\S*)}g) { + my $file = $1; + + if ($file =~ m{^(.*?)(?::\d+)+:?$} && + check_absolute_file($1, $herecurr)) { + # + } else { + check_absolute_file($file, $herecurr); + } + } + } + +# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php + if (($realfile =~ /^$/ || $line =~ /^\+/) && + $rawline !~ m/^$UTF8*$/) { + my ($utf8_prefix) = ($rawline =~ /^($UTF8*)/); + + my $blank = copy_spacing($rawline); + my $ptr = substr($blank, 0, length($utf8_prefix)) . "^"; + my $hereptr = "$hereline$ptr\n"; + + CHK("INVALID_UTF8", + "Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr); + } + +# Check if it's the start of a commit log +# (not a header line and we haven't seen the patch filename) + if ($in_header_lines && $realfile =~ /^$/ && + $rawline !~ /^(commit\b|from\b|[\w-]+:).+$/i) { + $in_header_lines = 0; + $in_commit_log = 1; + } + +# Check if there is UTF-8 in a commit log when a mail header has explicitly +# declined it, i.e defined some charset where it is missing. + if ($in_header_lines && + $rawline =~ /^Content-Type:.+charset="(.+)".*$/ && + $1 !~ /utf-8/i) { + $non_utf8_charset = 1; + } + + if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ && + $rawline =~ /$NON_ASCII_UTF8/) { + WARN("UTF8_BEFORE_PATCH", + "8-bit UTF-8 used in possible commit log\n" . $herecurr); + } + +# ignore non-hunk lines and lines being removed + next if (!$hunk_line || $line =~ /^-/); + +#trailing whitespace + if ($line =~ /^\+.*\015/) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + if (ERROR("DOS_LINE_ENDINGS", + "DOS line endings\n" . $herevet) && + $fix) { + $fixed[$linenr - 1] =~ s/[\s\015]+$//; + } + } elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + if (ERROR("TRAILING_WHITESPACE", + "trailing whitespace\n" . $herevet) && + $fix) { + $fixed[$linenr - 1] =~ s/\s+$//; + } + + $rpt_cleaners = 1; + } + +# Check for FSF mailing addresses. + if ($rawline =~ /\bwrite to the Free/i || + $rawline =~ /\b59\s+Temple\s+Pl/i || + $rawline =~ /\b51\s+Franklin\s+St/i) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + my $msg_type = \&ERROR; + $msg_type = \&CHK if ($file); + &{$msg_type}("FSF_MAILING_ADDRESS", + "Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.\n" . $herevet) + } + +# check for Kconfig help text having a real description +# Only applies when adding the entry originally, after that we do not have +# sufficient context to determine whether it is indeed long enough. + if ($realfile =~ /Kconfig/ && + $line =~ /.\s*config\s+/) { + my $length = 0; + my $cnt = $realcnt; + my $ln = $linenr + 1; + my $f; + my $is_start = 0; + my $is_end = 0; + for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) { + $f = $lines[$ln - 1]; + $cnt-- if ($lines[$ln - 1] !~ /^-/); + $is_end = $lines[$ln - 1] =~ /^\+/; + + next if ($f =~ /^-/); + + if ($lines[$ln - 1] =~ /.\s*(?:bool|tristate)\s*\"/) { + $is_start = 1; + } elsif ($lines[$ln - 1] =~ /.\s*(?:---)?help(?:---)?$/) { + $length = -1; + } + + $f =~ s/^.//; + $f =~ s/#.*//; + $f =~ s/^\s+//; + next if ($f =~ /^$/); + if ($f =~ /^\s*config\s/) { + $is_end = 1; + last; + } + $length++; + } + WARN("CONFIG_DESCRIPTION", + "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_start && $is_end && $length < 4); + #print "is_start<$is_start> is_end<$is_end> length<$length>\n"; + } + +# discourage the addition of CONFIG_EXPERIMENTAL in Kconfig. + if ($realfile =~ /Kconfig/ && + $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) { + WARN("CONFIG_EXPERIMENTAL", + "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); + } + + if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) && + ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) { + my $flag = $1; + my $replacement = { + 'EXTRA_AFLAGS' => 'asflags-y', + 'EXTRA_CFLAGS' => 'ccflags-y', + 'EXTRA_CPPFLAGS' => 'cppflags-y', + 'EXTRA_LDFLAGS' => 'ldflags-y', + }; + + WARN("DEPRECATED_VARIABLE", + "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag}); + } + +# check for DT compatible documentation + if (defined $root && $realfile =~ /\.dts/ && + $rawline =~ /^\+\s*compatible\s*=/) { + my @compats = $rawline =~ /\"([a-zA-Z0-9\-\,\.\+_]+)\"/g; + + foreach my $compat (@compats) { + my $compat2 = $compat; + my $dt_path = $root . "/Documentation/devicetree/bindings/"; + $compat2 =~ s/\,[a-z]*\-/\,<\.\*>\-/; + `grep -Erq "$compat|$compat2" $dt_path`; + if ( $? >> 8 ) { + WARN("UNDOCUMENTED_DT_STRING", + "DT compatible string \"$compat\" appears un-documented -- check $dt_path\n" . $herecurr); + } + + my $vendor = $compat; + my $vendor_path = $dt_path . "vendor-prefixes.txt"; + next if (! -f $vendor_path); + $vendor =~ s/^([a-zA-Z0-9]+)\,.*/$1/; + `grep -Eq "$vendor" $vendor_path`; + if ( $? >> 8 ) { + WARN("UNDOCUMENTED_DT_STRING", + "DT compatible string vendor \"$vendor\" appears un-documented -- check $vendor_path\n" . $herecurr); + } + } + } + +# check we are in a valid source file if not then ignore this hunk + next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/); + +#line length limit + if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ && + $rawline !~ /^.\s*\*\s*\@$Ident\s/ && + !($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:|,|\)\s*;)\s*$/ || + $line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) && + $length > $max_line_length) + { + WARN("LONG_LINE", + "line over $max_line_length characters\n" . $herecurr); + } + +# Check for user-visible strings broken across lines, which breaks the ability +# to grep for the string. Make exceptions when the previous string ends in a +# newline (multiple lines in one string constant) or '\t', '\r', ';', or '{' +# (common in inline assembly) or is a octal \123 or hexadecimal \xaf value + if ($line =~ /^\+\s*"/ && + $prevline =~ /"\s*$/ && + $prevrawline !~ /(?:\\(?:[ntr]|[0-7]{1,3}|x[0-9a-fA-F]{1,2})|;\s*|\{\s*)"\s*$/) { + WARN("SPLIT_STRING", + "quoted string split across lines\n" . $hereprev); + } + +# check for spaces before a quoted newline + if ($rawline =~ /^.*\".*\s\\n/) { + if (WARN("QUOTED_WHITESPACE_BEFORE_NEWLINE", + "unnecessary whitespace before a quoted newline\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/^(\+.*\".*)\s+\\n/$1\\n/; + } + + } + +# check for adding lines without a newline. + if ($line =~ /^\+/ && defined $lines[$linenr] && $lines[$linenr] =~ /^\\ No newline at end of file/) { + WARN("MISSING_EOF_NEWLINE", + "adding a line without newline at end of file\n" . $herecurr); + } + +# Blackfin: use hi/lo macros + if ($realfile =~ m@arch/blackfin/.*\.S$@) { + if ($line =~ /\.[lL][[:space:]]*=.*&[[:space:]]*0x[fF][fF][fF][fF]/) { + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("LO_MACRO", + "use the LO() macro, not (... & 0xFFFF)\n" . $herevet); + } + if ($line =~ /\.[hH][[:space:]]*=.*>>[[:space:]]*16/) { + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("HI_MACRO", + "use the HI() macro, not (... >> 16)\n" . $herevet); + } + } + +# check we are in a valid source file C or perl if not then ignore this hunk + next if ($realfile !~ /\.(h|c|pl)$/); + +# at the beginning of a line any tabs must come first and anything +# more than 8 must use tabs. + if ($rawline =~ /^\+\s* \t\s*\S/ || + $rawline =~ /^\+\s* \s*/) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + $rpt_cleaners = 1; + if (ERROR("CODE_INDENT", + "code indent should use tabs where possible\n" . $herevet) && + $fix) { + $fixed[$linenr - 1] =~ s/^\+([ \t]+)/"\+" . tabify($1)/e; + } + } + +# check for space before tabs. + if ($rawline =~ /^\+/ && $rawline =~ / \t/) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + if (WARN("SPACE_BEFORE_TAB", + "please, no space before tabs\n" . $herevet) && + $fix) { + while ($fixed[$linenr - 1] =~ + s/(^\+.*) {8,8}+\t/$1\t\t/) {} + while ($fixed[$linenr - 1] =~ + s/(^\+.*) +\t/$1\t/) {} + } + } + +# check for && or || at the start of a line + if ($rawline =~ /^\+\s*(&&|\|\|)/) { + CHK("LOGICAL_CONTINUATIONS", + "Logical continuations should be on the previous line\n" . $hereprev); + } + +# check multi-line statement indentation matches previous line + if ($^V && $^V ge 5.10.0 && + $prevline =~ /^\+(\t*)(if \(|$Ident\().*(\&\&|\|\||,)\s*$/) { + $prevline =~ /^\+(\t*)(.*)$/; + my $oldindent = $1; + my $rest = $2; + + my $pos = pos_last_openparen($rest); + if ($pos >= 0) { + $line =~ /^(\+| )([ \t]*)/; + my $newindent = $2; + + my $goodtabindent = $oldindent . + "\t" x ($pos / 8) . + " " x ($pos % 8); + my $goodspaceindent = $oldindent . " " x $pos; + + if ($newindent ne $goodtabindent && + $newindent ne $goodspaceindent) { + + if (CHK("PARENTHESIS_ALIGNMENT", + "Alignment should match open parenthesis\n" . $hereprev) && + $fix && $line =~ /^\+/) { + $fixed[$linenr - 1] =~ + s/^\+[ \t]*/\+$goodtabindent/; + } + } + } + } + + if ($line =~ /^\+.*\*[ \t]*\)[ \t]+(?!$Assignment|$Arithmetic)/) { + if (CHK("SPACING", + "No space is necessary after a cast\n" . $hereprev) && + $fix) { + $fixed[$linenr - 1] =~ + s/^(\+.*\*[ \t]*\))[ \t]+/$1/; + } + } + + if ($realfile =~ m@^(drivers/net/|net/)@ && + $prevrawline =~ /^\+[ \t]*\/\*[ \t]*$/ && + $rawline =~ /^\+[ \t]*\*/) { + WARN("NETWORKING_BLOCK_COMMENT_STYLE", + "networking block comments don't use an empty /* line, use /* Comment...\n" . $hereprev); + } + + if ($realfile =~ m@^(drivers/net/|net/)@ && + $prevrawline =~ /^\+[ \t]*\/\*/ && #starting /* + $prevrawline !~ /\*\/[ \t]*$/ && #no trailing */ + $rawline =~ /^\+/ && #line is new + $rawline !~ /^\+[ \t]*\*/) { #no leading * + WARN("NETWORKING_BLOCK_COMMENT_STYLE", + "networking block comments start with * on subsequent lines\n" . $hereprev); + } + + if ($realfile =~ m@^(drivers/net/|net/)@ && + $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */ + $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/ + $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/ + $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */ + WARN("NETWORKING_BLOCK_COMMENT_STYLE", + "networking block comments put the trailing */ on a separate line\n" . $herecurr); + } + +# check for spaces at the beginning of a line. +# Exceptions: +# 1) within comments +# 2) indented preprocessor commands +# 3) hanging labels + if ($rawline =~ /^\+ / && $line !~ /^\+ *(?:$;|#|$Ident:)/) { + my $herevet = "$here\n" . cat_vet($rawline) . "\n"; + if (WARN("LEADING_SPACE", + "please, no spaces at the start of a line\n" . $herevet) && + $fix) { + $fixed[$linenr - 1] =~ s/^\+([ \t]+)/"\+" . tabify($1)/e; + } + } + +# check we are in a valid C source file if not then ignore this hunk + next if ($realfile !~ /\.(h|c)$/); + +# discourage the addition of CONFIG_EXPERIMENTAL in #if(def). + if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) { + WARN("CONFIG_EXPERIMENTAL", + "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); + } + +# check for RCS/CVS revision markers + if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) { + WARN("CVS_KEYWORD", + "CVS style keyword markers, these will _not_ be updated\n". $herecurr); + } + +# Blackfin: don't use __builtin_bfin_[cs]sync + if ($line =~ /__builtin_bfin_csync/) { + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("CSYNC", + "use the CSYNC() macro in asm/blackfin.h\n" . $herevet); + } + if ($line =~ /__builtin_bfin_ssync/) { + my $herevet = "$here\n" . cat_vet($line) . "\n"; + ERROR("SSYNC", + "use the SSYNC() macro in asm/blackfin.h\n" . $herevet); + } + +# check for old HOTPLUG __dev section markings + if ($line =~ /\b(__dev(init|exit)(data|const|))\b/) { + WARN("HOTPLUG_SECTION", + "Using $1 is unnecessary\n" . $herecurr); + } + +# Check for potential 'bare' types + my ($stat, $cond, $line_nr_next, $remain_next, $off_next, + $realline_next); +#print "LINE<$line>\n"; + if ($linenr >= $suppress_statement && + $realcnt && $sline =~ /.\s*\S/) { + ($stat, $cond, $line_nr_next, $remain_next, $off_next) = + ctx_statement_block($linenr, $realcnt, 0); + $stat =~ s/\n./\n /g; + $cond =~ s/\n./\n /g; + +#print "linenr<$linenr> <$stat>\n"; + # If this statement has no statement boundaries within + # it there is no point in retrying a statement scan + # until we hit end of it. + my $frag = $stat; $frag =~ s/;+\s*$//; + if ($frag !~ /(?:{|;)/) { +#print "skip<$line_nr_next>\n"; + $suppress_statement = $line_nr_next; + } + + # Find the real next line. + $realline_next = $line_nr_next; + if (defined $realline_next && + (!defined $lines[$realline_next - 1] || + substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) { + $realline_next++; + } + + my $s = $stat; + $s =~ s/{.*$//s; + + # Ignore goto labels. + if ($s =~ /$Ident:\*$/s) { + + # Ignore functions being called + } elsif ($s =~ /^.\s*$Ident\s*\(/s) { + + } elsif ($s =~ /^.\s*else\b/s) { + + # declarations always start with types + } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) { + my $type = $1; + $type =~ s/\s+/ /g; + possible($type, "A:" . $s); + + # definitions in global scope can only start with types + } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b\s*(?!:)/s) { + possible($1, "B:" . $s); + } + + # any (foo ... *) is a pointer cast, and foo is a type + while ($s =~ /\(($Ident)(?:\s+$Sparse)*[\s\*]+\s*\)/sg) { + possible($1, "C:" . $s); + } + + # Check for any sort of function declaration. + # int foo(something bar, other baz); + # void (*store_gdt)(x86_descr_ptr *); + if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/s) { + my ($name_len) = length($1); + + my $ctx = $s; + substr($ctx, 0, $name_len + 1, ''); + $ctx =~ s/\)[^\)]*$//; + + for my $arg (split(/\s*,\s*/, $ctx)) { + if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) { + + possible($1, "D:" . $s); + } + } + } + + } + +# +# Checks which may be anchored in the context. +# + +# Check for switch () and associated case and default +# statements should be at the same indent. + if ($line=~/\bswitch\s*\(.*\)/) { + my $err = ''; + my $sep = ''; + my @ctx = ctx_block_outer($linenr, $realcnt); + shift(@ctx); + for my $ctx (@ctx) { + my ($clen, $cindent) = line_stats($ctx); + if ($ctx =~ /^\+\s*(case\s+|default:)/ && + $indent != $cindent) { + $err .= "$sep$ctx\n"; + $sep = ''; + } else { + $sep = "[...]\n"; + } + } + if ($err ne '') { + ERROR("SWITCH_CASE_INDENT_LEVEL", + "switch and case should be at the same indent\n$hereline$err"); + } + } + +# if/while/etc brace do not go on next line, unless defining a do while loop, +# or if that brace on the next line is for something else + if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) { + my $pre_ctx = "$1$2"; + + my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0); + + if ($line =~ /^\+\t{6,}/) { + WARN("DEEP_INDENTATION", + "Too many leading tabs - consider code refactoring\n" . $herecurr); + } + + my $ctx_cnt = $realcnt - $#ctx - 1; + my $ctx = join("\n", @ctx); + + my $ctx_ln = $linenr; + my $ctx_skip = $realcnt; + + while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt && + defined $lines[$ctx_ln - 1] && + $lines[$ctx_ln - 1] =~ /^-/)) { + ##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n"; + $ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/); + $ctx_ln++; + } + + #print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n"; + #print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n"; + + if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { + ERROR("OPEN_BRACE", + "that open brace { should be on the previous line\n" . + "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); + } + if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ && + $ctx =~ /\)\s*\;\s*$/ && + defined $lines[$ctx_ln - 1]) + { + my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]); + if ($nindent > $indent) { + WARN("TRAILING_SEMICOLON", + "trailing semicolon indicates no statements, indent implies otherwise\n" . + "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); + } + } + } + +# Check relative indent for conditionals and blocks. + if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) { + ($stat, $cond, $line_nr_next, $remain_next, $off_next) = + ctx_statement_block($linenr, $realcnt, 0) + if (!defined $stat); + my ($s, $c) = ($stat, $cond); + + substr($s, 0, length($c), ''); + + # Make sure we remove the line prefixes as we have + # none on the first line, and are going to readd them + # where necessary. + $s =~ s/\n./\n/gs; + + # Find out how long the conditional actually is. + my @newlines = ($c =~ /\n/gs); + my $cond_lines = 1 + $#newlines; + + # We want to check the first line inside the block + # starting at the end of the conditional, so remove: + # 1) any blank line termination + # 2) any opening brace { on end of the line + # 3) any do (...) { + my $continuation = 0; + my $check = 0; + $s =~ s/^.*\bdo\b//; + $s =~ s/^\s*{//; + if ($s =~ s/^\s*\\//) { + $continuation = 1; + } + if ($s =~ s/^\s*?\n//) { + $check = 1; + $cond_lines++; + } + + # Also ignore a loop construct at the end of a + # preprocessor statement. + if (($prevline =~ /^.\s*#\s*define\s/ || + $prevline =~ /\\\s*$/) && $continuation == 0) { + $check = 0; + } + + my $cond_ptr = -1; + $continuation = 0; + while ($cond_ptr != $cond_lines) { + $cond_ptr = $cond_lines; + + # If we see an #else/#elif then the code + # is not linear. + if ($s =~ /^\s*\#\s*(?:else|elif)/) { + $check = 0; + } + + # Ignore: + # 1) blank lines, they should be at 0, + # 2) preprocessor lines, and + # 3) labels. + if ($continuation || + $s =~ /^\s*?\n/ || + $s =~ /^\s*#\s*?/ || + $s =~ /^\s*$Ident\s*:/) { + $continuation = ($s =~ /^.*?\\\n/) ? 1 : 0; + if ($s =~ s/^.*?\n//) { + $cond_lines++; + } + } + } + + my (undef, $sindent) = line_stats("+" . $s); + my $stat_real = raw_line($linenr, $cond_lines); + + # Check if either of these lines are modified, else + # this is not this patch's fault. + if (!defined($stat_real) || + $stat !~ /^\+/ && $stat_real !~ /^\+/) { + $check = 0; + } + if (defined($stat_real) && $cond_lines > 1) { + $stat_real = "[...]\n$stat_real"; + } + + #print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n"; + + if ($check && (($sindent % 8) != 0 || + ($sindent <= $indent && $s ne ''))) { + WARN("SUSPECT_CODE_INDENT", + "suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n"); + } + } + + # Track the 'values' across context and added lines. + my $opline = $line; $opline =~ s/^./ /; + my ($curr_values, $curr_vars) = + annotate_values($opline . "\n", $prev_values); + $curr_values = $prev_values . $curr_values; + if ($dbg_values) { + my $outline = $opline; $outline =~ s/\t/ /g; + print "$linenr > .$outline\n"; + print "$linenr > $curr_values\n"; + print "$linenr > $curr_vars\n"; + } + $prev_values = substr($curr_values, -1); + +#ignore lines not being added + next if ($line =~ /^[^\+]/); + +# TEST: allow direct testing of the type matcher. + if ($dbg_type) { + if ($line =~ /^.\s*$Declare\s*$/) { + ERROR("TEST_TYPE", + "TEST: is type\n" . $herecurr); + } elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) { + ERROR("TEST_NOT_TYPE", + "TEST: is not type ($1 is)\n". $herecurr); + } + next; + } +# TEST: allow direct testing of the attribute matcher. + if ($dbg_attr) { + if ($line =~ /^.\s*$Modifier\s*$/) { + ERROR("TEST_ATTR", + "TEST: is attr\n" . $herecurr); + } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) { + ERROR("TEST_NOT_ATTR", + "TEST: is not attr ($1 is)\n". $herecurr); + } + next; + } + +# check for initialisation to aggregates open brace on the next line + if ($line =~ /^.\s*{/ && + $prevline =~ /(?:^|[^=])=\s*$/) { + ERROR("OPEN_BRACE", + "that open brace { should be on the previous line\n" . $hereprev); + } + +# +# Checks which are anchored on the added line. +# + +# check for malformed paths in #include statements (uses RAW line) + if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) { + my $path = $1; + if ($path =~ m{//}) { + ERROR("MALFORMED_INCLUDE", + "malformed #include filename\n" . $herecurr); + } + if ($path =~ "^uapi/" && $realfile =~ m@\binclude/uapi/@) { + ERROR("UAPI_INCLUDE", + "No #include in ...include/uapi/... should use a uapi/ path prefix\n" . $herecurr); + } + } + +# no C99 // comments + if ($line =~ m{//}) { + if (ERROR("C99_COMMENTS", + "do not use C99 // comments\n" . $herecurr) && + $fix) { + my $line = $fixed[$linenr - 1]; + if ($line =~ /\/\/(.*)$/) { + my $comment = trim($1); + $fixed[$linenr - 1] =~ s@\/\/(.*)$@/\* $comment \*/@; + } + } + } + # Remove C99 comments. + $line =~ s@//.*@@; + $opline =~ s@//.*@@; + +# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider +# the whole statement. +#print "APW <$lines[$realline_next - 1]>\n"; + if (defined $realline_next && + exists $lines[$realline_next - 1] && + !defined $suppress_export{$realline_next} && + ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { + # Handle definitions which produce identifiers with + # a prefix: + # XXX(foo); + # EXPORT_SYMBOL(something_foo); + my $name = $1; + if ($stat =~ /^(?:.\s*}\s*\n)?.([A-Z_]+)\s*\(\s*($Ident)/ && + $name =~ /^${Ident}_$2/) { +#print "FOO C name<$name>\n"; + $suppress_export{$realline_next} = 1; + + } elsif ($stat !~ /(?: + \n.}\s*$| + ^.DEFINE_$Ident\(\Q$name\E\)| + ^.DECLARE_$Ident\(\Q$name\E\)| + ^.LIST_HEAD\(\Q$name\E\)| + ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| + \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\() + )/x) { +#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n"; + $suppress_export{$realline_next} = 2; + } else { + $suppress_export{$realline_next} = 1; + } + } + if (!defined $suppress_export{$linenr} && + $prevline =~ /^.\s*$/ && + ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +#print "FOO B <$lines[$linenr - 1]>\n"; + $suppress_export{$linenr} = 2; + } + if (defined $suppress_export{$linenr} && + $suppress_export{$linenr} == 2) { + WARN("EXPORT_SYMBOL", + "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); + } + +# check for global initialisers. + if ($line =~ /^\+(\s*$Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/) { + if (ERROR("GLOBAL_INITIALISERS", + "do not initialise globals to 0 or NULL\n" . + $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/($Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/$1;/; + } + } +# check for static initialisers. + if ($line =~ /^\+.*\bstatic\s.*=\s*(0|NULL|false)\s*;/) { + if (ERROR("INITIALISED_STATIC", + "do not initialise statics to 0 or NULL\n" . + $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/(\bstatic\s.*?)\s*=\s*(0|NULL|false)\s*;/$1;/; + } + } + +# check for static const char * arrays. + if ($line =~ /\bstatic\s+const\s+char\s*\*\s*(\w+)\s*\[\s*\]\s*=\s*/) { + WARN("STATIC_CONST_CHAR_ARRAY", + "static const char * array should probably be static const char * const\n" . + $herecurr); + } + +# check for static char foo[] = "bar" declarations. + if ($line =~ /\bstatic\s+char\s+(\w+)\s*\[\s*\]\s*=\s*"/) { + WARN("STATIC_CONST_CHAR_ARRAY", + "static char array declaration should probably be static const char\n" . + $herecurr); + } + +# check for function declarations without arguments like "int foo()" + if ($line =~ /(\b$Type\s+$Ident)\s*\(\s*\)/) { + if (ERROR("FUNCTION_WITHOUT_ARGS", + "Bad function definition - $1() should probably be $1(void)\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/(\b($Type)\s+($Ident))\s*\(\s*\)/$2 $3(void)/; + } + } + +# check for uses of DEFINE_PCI_DEVICE_TABLE + if ($line =~ /\bDEFINE_PCI_DEVICE_TABLE\s*\(\s*(\w+)\s*\)\s*=/) { + if (WARN("DEFINE_PCI_DEVICE_TABLE", + "Prefer struct pci_device_id over deprecated DEFINE_PCI_DEVICE_TABLE\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\b(?:static\s+|)DEFINE_PCI_DEVICE_TABLE\s*\(\s*(\w+)\s*\)\s*=\s*/static const struct pci_device_id $1\[\] = /; + } + } + +# check for new typedefs, only function parameters and sparse annotations +# make sense. + if ($line =~ /\btypedef\s/ && + $line !~ /\btypedef\s+$Type\s*\(\s*\*?$Ident\s*\)\s*\(/ && + $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ && + $line !~ /\b$typeTypedefs\b/ && + $line !~ /\b__bitwise(?:__|)\b/) { + WARN("NEW_TYPEDEFS", + "do not add new typedefs\n" . $herecurr); + } + +# * goes on variable not on type + # (char*[ const]) + while ($line =~ m{(\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\))}g) { + #print "AA<$1>\n"; + my ($ident, $from, $to) = ($1, $2, $2); + + # Should start with a space. + $to =~ s/^(\S)/ $1/; + # Should not end with a space. + $to =~ s/\s+$//; + # '*'s should not have spaces between. + while ($to =~ s/\*\s+\*/\*\*/) { + } + +## print "1: from<$from> to<$to> ident<$ident>\n"; + if ($from ne $to) { + if (ERROR("POINTER_LOCATION", + "\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr) && + $fix) { + my $sub_from = $ident; + my $sub_to = $ident; + $sub_to =~ s/\Q$from\E/$to/; + $fixed[$linenr - 1] =~ + s@\Q$sub_from\E@$sub_to@; + } + } + } + while ($line =~ m{(\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident))}g) { + #print "BB<$1>\n"; + my ($match, $from, $to, $ident) = ($1, $2, $2, $3); + + # Should start with a space. + $to =~ s/^(\S)/ $1/; + # Should not end with a space. + $to =~ s/\s+$//; + # '*'s should not have spaces between. + while ($to =~ s/\*\s+\*/\*\*/) { + } + # Modifiers should have spaces. + $to =~ s/(\b$Modifier$)/$1 /; + +## print "2: from<$from> to<$to> ident<$ident>\n"; + if ($from ne $to && $ident !~ /^$Modifier$/) { + if (ERROR("POINTER_LOCATION", + "\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr) && + $fix) { + + my $sub_from = $match; + my $sub_to = $match; + $sub_to =~ s/\Q$from\E/$to/; + $fixed[$linenr - 1] =~ + s@\Q$sub_from\E@$sub_to@; + } + } + } + +# # no BUG() or BUG_ON() +# if ($line =~ /\b(BUG|BUG_ON)\b/) { +# print "Try to use WARN_ON & Recovery code rather than BUG() or BUG_ON()\n"; +# print "$herecurr"; +# $clean = 0; +# } + + if ($line =~ /\bLINUX_VERSION_CODE\b/) { + WARN("LINUX_VERSION_CODE", + "LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr); + } + +# check for uses of printk_ratelimit + if ($line =~ /\bprintk_ratelimit\s*\(/) { + WARN("PRINTK_RATELIMITED", +"Prefer printk_ratelimited or pr__ratelimited to printk_ratelimit\n" . $herecurr); + } + +# printk should use KERN_* levels. Note that follow on printk's on the +# same line do not need a level, so we use the current block context +# to try and find and validate the current printk. In summary the current +# printk includes all preceding printk's which have no newline on the end. +# we assume the first bad printk is the one to report. + if ($line =~ /\bprintk\((?!KERN_)\s*"/) { + my $ok = 0; + for (my $ln = $linenr - 1; $ln >= $first_line; $ln--) { + #print "CHECK<$lines[$ln - 1]\n"; + # we have a preceding printk if it ends + # with "\n" ignore it, else it is to blame + if ($lines[$ln - 1] =~ m{\bprintk\(}) { + if ($rawlines[$ln - 1] !~ m{\\n"}) { + $ok = 1; + } + last; + } + } + if ($ok == 0) { + WARN("PRINTK_WITHOUT_KERN_LEVEL", + "printk() should include KERN_ facility level\n" . $herecurr); + } + } + + if ($line =~ /\bprintk\s*\(\s*KERN_([A-Z]+)/) { + my $orig = $1; + my $level = lc($orig); + $level = "warn" if ($level eq "warning"); + my $level2 = $level; + $level2 = "dbg" if ($level eq "debug"); + WARN("PREFER_PR_LEVEL", + "Prefer netdev_$level2(netdev, ... then dev_$level2(dev, ... then pr_$level(... to printk(KERN_$orig ...\n" . $herecurr); + } + + if ($line =~ /\bpr_warning\s*\(/) { + if (WARN("PREFER_PR_LEVEL", + "Prefer pr_warn(... to pr_warning(...\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\bpr_warning\b/pr_warn/; + } + } + + if ($line =~ /\bdev_printk\s*\(\s*KERN_([A-Z]+)/) { + my $orig = $1; + my $level = lc($orig); + $level = "warn" if ($level eq "warning"); + $level = "dbg" if ($level eq "debug"); + WARN("PREFER_DEV_LEVEL", + "Prefer dev_$level(... to dev_printk(KERN_$orig, ...\n" . $herecurr); + } + +# function brace can't be on same line, except for #defines of do while, +# or if closed on same line + if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and + !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) { + ERROR("OPEN_BRACE", + "open brace '{' following function declarations go on the next line\n" . $herecurr); + } + +# open braces for enum, union and struct go on the same line. + if ($line =~ /^.\s*{/ && + $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) { + ERROR("OPEN_BRACE", + "open brace '{' following $1 go on the same line\n" . $hereprev); + } + +# missing space after union, struct or enum definition + if ($line =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident){1,2}[=\{]/) { + if (WARN("SPACING", + "missing space after $1 definition\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/^(.\s*(?:typedef\s+)?(?:enum|union|struct)(?:\s+$Ident){1,2})([=\{])/$1 $2/; + } + } + +# Function pointer declarations +# check spacing between type, funcptr, and args +# canonical declaration is "type (*funcptr)(args...)" +# +# the $Declare variable will capture all spaces after the type +# so check it for trailing missing spaces or multiple spaces + if ($line =~ /^.\s*($Declare)\((\s*)\*(\s*)$Ident(\s*)\)(\s*)\(/) { + my $declare = $1; + my $pre_pointer_space = $2; + my $post_pointer_space = $3; + my $funcname = $4; + my $post_funcname_space = $5; + my $pre_args_space = $6; + + if ($declare !~ /\s$/) { + WARN("SPACING", + "missing space after return type\n" . $herecurr); + } + +# unnecessary space "type (*funcptr)(args...)" + elsif ($declare =~ /\s{2,}$/) { + WARN("SPACING", + "Multiple spaces after return type\n" . $herecurr); + } + +# unnecessary space "type ( *funcptr)(args...)" + if (defined $pre_pointer_space && + $pre_pointer_space =~ /^\s/) { + WARN("SPACING", + "Unnecessary space after function pointer open parenthesis\n" . $herecurr); + } + +# unnecessary space "type (* funcptr)(args...)" + if (defined $post_pointer_space && + $post_pointer_space =~ /^\s/) { + WARN("SPACING", + "Unnecessary space before function pointer name\n" . $herecurr); + } + +# unnecessary space "type (*funcptr )(args...)" + if (defined $post_funcname_space && + $post_funcname_space =~ /^\s/) { + WARN("SPACING", + "Unnecessary space after function pointer name\n" . $herecurr); + } + +# unnecessary space "type (*funcptr) (args...)" + if (defined $pre_args_space && + $pre_args_space =~ /^\s/) { + WARN("SPACING", + "Unnecessary space before function pointer arguments\n" . $herecurr); + } + + if (show_type("SPACING") && $fix) { + $fixed[$linenr - 1] =~ + s/^(.\s*$Declare)\(\s*\*\s*($Ident)\s*\)\s*\(/rtrim($1) . " " . "\(\*$2\)\("/ex; + } + } + +# check for spacing round square brackets; allowed: +# 1. with a type on the left -- int [] a; +# 2. at the beginning of a line for slice initialisers -- [0...10] = 5, +# 3. inside a curly brace -- = { [0...10] = 5 } + while ($line =~ /(.*?\s)\[/g) { + my ($where, $prefix) = ($-[1], $1); + if ($prefix !~ /$Type\s+$/ && + ($where != 0 || $prefix !~ /^.\s+$/) && + $prefix !~ /[{,]\s+$/) { + if (ERROR("BRACKET_SPACE", + "space prohibited before open square bracket '['\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/^(\+.*?)\s+\[/$1\[/; + } + } + } + +# check for spaces between functions and their parentheses. + while ($line =~ /($Ident)\s+\(/g) { + my $name = $1; + my $ctx_before = substr($line, 0, $-[1]); + my $ctx = "$ctx_before$name"; + + # Ignore those directives where spaces _are_ permitted. + if ($name =~ /^(?: + if|for|while|switch|return|case| + volatile|__volatile__| + __attribute__|format|__extension__| + asm|__asm__)$/x) + { + # cpp #define statements have non-optional spaces, ie + # if there is a space between the name and the open + # parenthesis it is simply not a parameter group. + } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) { + + # cpp #elif statement condition may start with a ( + } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) { + + # If this whole things ends with a type its most + # likely a typedef for a function. + } elsif ($ctx =~ /$Type$/) { + + } else { + if (WARN("SPACING", + "space prohibited between function name and open parenthesis '('\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\b$name\s+\(/$name\(/; + } + } + } + +# Check operator spacing. + if (!($line=~/\#\s*include/)) { + my $fixed_line = ""; + my $line_fixed = 0; + + my $ops = qr{ + <<=|>>=|<=|>=|==|!=| + \+=|-=|\*=|\/=|%=|\^=|\|=|&=| + =>|->|<<|>>|<|>|=|!|~| + &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%| + \?:|\?|: + }x; + my @elements = split(/($ops|;)/, $opline); + +## print("element count: <" . $#elements . ">\n"); +## foreach my $el (@elements) { +## print("el: <$el>\n"); +## } + + my @fix_elements = (); + my $off = 0; + + foreach my $el (@elements) { + push(@fix_elements, substr($rawline, $off, length($el))); + $off += length($el); + } + + $off = 0; + + my $blank = copy_spacing($opline); + my $last_after = -1; + + for (my $n = 0; $n < $#elements; $n += 2) { + + my $good = $fix_elements[$n] . $fix_elements[$n + 1]; + +## print("n: <$n> good: <$good>\n"); + + $off += length($elements[$n]); + + # Pick up the preceding and succeeding characters. + my $ca = substr($opline, 0, $off); + my $cc = ''; + if (length($opline) >= ($off + length($elements[$n + 1]))) { + $cc = substr($opline, $off + length($elements[$n + 1])); + } + my $cb = "$ca$;$cc"; + + my $a = ''; + $a = 'V' if ($elements[$n] ne ''); + $a = 'W' if ($elements[$n] =~ /\s$/); + $a = 'C' if ($elements[$n] =~ /$;$/); + $a = 'B' if ($elements[$n] =~ /(\[|\()$/); + $a = 'O' if ($elements[$n] eq ''); + $a = 'E' if ($ca =~ /^\s*$/); + + my $op = $elements[$n + 1]; + + my $c = ''; + if (defined $elements[$n + 2]) { + $c = 'V' if ($elements[$n + 2] ne ''); + $c = 'W' if ($elements[$n + 2] =~ /^\s/); + $c = 'C' if ($elements[$n + 2] =~ /^$;/); + $c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/); + $c = 'O' if ($elements[$n + 2] eq ''); + $c = 'E' if ($elements[$n + 2] =~ /^\s*\\$/); + } else { + $c = 'E'; + } + + my $ctx = "${a}x${c}"; + + my $at = "(ctx:$ctx)"; + + my $ptr = substr($blank, 0, $off) . "^"; + my $hereptr = "$hereline$ptr\n"; + + # Pull out the value of this operator. + my $op_type = substr($curr_values, $off + 1, 1); + + # Get the full operator variant. + my $opv = $op . substr($curr_vars, $off, 1); + + # Ignore operators passed as parameters. + if ($op_type ne 'V' && + $ca =~ /\s$/ && $cc =~ /^\s*,/) { + +# # Ignore comments +# } elsif ($op =~ /^$;+$/) { + + # ; should have either the end of line or a space or \ after it + } elsif ($op eq ';') { + if ($ctx !~ /.x[WEBC]/ && + $cc !~ /^\\/ && $cc !~ /^;/) { + if (ERROR("SPACING", + "space required after that '$op' $at\n" . $hereptr)) { + $good = $fix_elements[$n] . trim($fix_elements[$n + 1]) . " "; + $line_fixed = 1; + } + } + + # // is a comment + } elsif ($op eq '//') { + + # No spaces for: + # -> + # : when part of a bitfield + } elsif ($op eq '->' || $opv eq ':B') { + if ($ctx =~ /Wx.|.xW/) { + if (ERROR("SPACING", + "spaces prohibited around that '$op' $at\n" . $hereptr)) { + $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]); + if (defined $fix_elements[$n + 2]) { + $fix_elements[$n + 2] =~ s/^\s+//; + } + $line_fixed = 1; + } + } + + # , must have a space on the right. + } elsif ($op eq ',') { + if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) { + if (ERROR("SPACING", + "space required after that '$op' $at\n" . $hereptr)) { + $good = $fix_elements[$n] . trim($fix_elements[$n + 1]) . " "; + $line_fixed = 1; + $last_after = $n; + } + } + + # '*' as part of a type definition -- reported already. + } elsif ($opv eq '*_') { + #warn "'*' is part of type\n"; + + # unary operators should have a space before and + # none after. May be left adjacent to another + # unary operator, or a cast + } elsif ($op eq '!' || $op eq '~' || + $opv eq '*U' || $opv eq '-U' || + $opv eq '&U' || $opv eq '&&U') { + if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) { + if (ERROR("SPACING", + "space required before that '$op' $at\n" . $hereptr)) { + if ($n != $last_after + 2) { + $good = $fix_elements[$n] . " " . ltrim($fix_elements[$n + 1]); + $line_fixed = 1; + } + } + } + if ($op eq '*' && $cc =~/\s*$Modifier\b/) { + # A unary '*' may be const + + } elsif ($ctx =~ /.xW/) { + if (ERROR("SPACING", + "space prohibited after that '$op' $at\n" . $hereptr)) { + $good = $fix_elements[$n] . rtrim($fix_elements[$n + 1]); + if (defined $fix_elements[$n + 2]) { + $fix_elements[$n + 2] =~ s/^\s+//; + } + $line_fixed = 1; + } + } + + # unary ++ and unary -- are allowed no space on one side. + } elsif ($op eq '++' or $op eq '--') { + if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) { + if (ERROR("SPACING", + "space required one side of that '$op' $at\n" . $hereptr)) { + $good = $fix_elements[$n] . trim($fix_elements[$n + 1]) . " "; + $line_fixed = 1; + } + } + if ($ctx =~ /Wx[BE]/ || + ($ctx =~ /Wx./ && $cc =~ /^;/)) { + if (ERROR("SPACING", + "space prohibited before that '$op' $at\n" . $hereptr)) { + $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]); + $line_fixed = 1; + } + } + if ($ctx =~ /ExW/) { + if (ERROR("SPACING", + "space prohibited after that '$op' $at\n" . $hereptr)) { + $good = $fix_elements[$n] . trim($fix_elements[$n + 1]); + if (defined $fix_elements[$n + 2]) { + $fix_elements[$n + 2] =~ s/^\s+//; + } + $line_fixed = 1; + } + } + + # << and >> may either have or not have spaces both sides + } elsif ($op eq '<<' or $op eq '>>' or + $op eq '&' or $op eq '^' or $op eq '|' or + $op eq '+' or $op eq '-' or + $op eq '*' or $op eq '/' or + $op eq '%') + { + if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) { + if (ERROR("SPACING", + "need consistent spacing around '$op' $at\n" . $hereptr)) { + $good = rtrim($fix_elements[$n]) . " " . trim($fix_elements[$n + 1]) . " "; + if (defined $fix_elements[$n + 2]) { + $fix_elements[$n + 2] =~ s/^\s+//; + } + $line_fixed = 1; + } + } + + # A colon needs no spaces before when it is + # terminating a case value or a label. + } elsif ($opv eq ':C' || $opv eq ':L') { + if ($ctx =~ /Wx./) { + if (ERROR("SPACING", + "space prohibited before that '$op' $at\n" . $hereptr)) { + $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]); + $line_fixed = 1; + } + } + + # All the others need spaces both sides. + } elsif ($ctx !~ /[EWC]x[CWE]/) { + my $ok = 0; + + # Ignore email addresses + if (($op eq '<' && + $cc =~ /^\S+\@\S+>/) || + ($op eq '>' && + $ca =~ /<\S+\@\S+$/)) + { + $ok = 1; + } + + # messages are ERROR, but ?: are CHK + if ($ok == 0) { + my $msg_type = \&ERROR; + $msg_type = \&CHK if (($op eq '?:' || $op eq '?' || $op eq ':') && $ctx =~ /VxV/); + + if (&{$msg_type}("SPACING", + "spaces required around that '$op' $at\n" . $hereptr)) { + $good = rtrim($fix_elements[$n]) . " " . trim($fix_elements[$n + 1]) . " "; + if (defined $fix_elements[$n + 2]) { + $fix_elements[$n + 2] =~ s/^\s+//; + } + $line_fixed = 1; + } + } + } + $off += length($elements[$n + 1]); + +## print("n: <$n> GOOD: <$good>\n"); + + $fixed_line = $fixed_line . $good; + } + + if (($#elements % 2) == 0) { + $fixed_line = $fixed_line . $fix_elements[$#elements]; + } + + if ($fix && $line_fixed && $fixed_line ne $fixed[$linenr - 1]) { + $fixed[$linenr - 1] = $fixed_line; + } + + + } + +# check for whitespace before a non-naked semicolon + if ($line =~ /^\+.*\S\s+;\s*$/) { + if (WARN("SPACING", + "space prohibited before semicolon\n" . $herecurr) && + $fix) { + 1 while $fixed[$linenr - 1] =~ + s/^(\+.*\S)\s+;/$1;/; + } + } + +# check for multiple assignments + if ($line =~ /^.\s*$Lval\s*=\s*$Lval\s*=(?!=)/) { + CHK("MULTIPLE_ASSIGNMENTS", + "multiple assignments should be avoided\n" . $herecurr); + } + +## # check for multiple declarations, allowing for a function declaration +## # continuation. +## if ($line =~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Ident.*/ && +## $line !~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Type\s*$Ident.*/) { +## +## # Remove any bracketed sections to ensure we do not +## # falsly report the parameters of functions. +## my $ln = $line; +## while ($ln =~ s/\([^\(\)]*\)//g) { +## } +## if ($ln =~ /,/) { +## WARN("MULTIPLE_DECLARATION", +## "declaring multiple variables together should be avoided\n" . $herecurr); +## } +## } + +#need space before brace following if, while, etc + if (($line =~ /\(.*\){/ && $line !~ /\($Type\){/) || + $line =~ /do{/) { + if (ERROR("SPACING", + "space required before the open brace '{'\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/^(\+.*(?:do|\))){/$1 {/; + } + } + +## # check for blank lines before declarations +## if ($line =~ /^.\t+$Type\s+$Ident(?:\s*=.*)?;/ && +## $prevrawline =~ /^.\s*$/) { +## WARN("SPACING", +## "No blank lines before declarations\n" . $hereprev); +## } +## + +# closing brace should have a space following it when it has anything +# on the line + if ($line =~ /}(?!(?:,|;|\)))\S/) { + if (ERROR("SPACING", + "space required after that close brace '}'\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/}((?!(?:,|;|\)))\S)/} $1/; + } + } + +# check spacing on square brackets + if ($line =~ /\[\s/ && $line !~ /\[\s*$/) { + if (ERROR("SPACING", + "space prohibited after that open square bracket '['\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\[\s+/\[/; + } + } + if ($line =~ /\s\]/) { + if (ERROR("SPACING", + "space prohibited before that close square bracket ']'\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\s+\]/\]/; + } + } + +# check spacing on parentheses + if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ && + $line !~ /for\s*\(\s+;/) { + if (ERROR("SPACING", + "space prohibited after that open parenthesis '('\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\(\s+/\(/; + } + } + if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ && + $line !~ /for\s*\(.*;\s+\)/ && + $line !~ /:\s+\)/) { + if (ERROR("SPACING", + "space prohibited before that close parenthesis ')'\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\s+\)/\)/; + } + } + +#goto labels aren't indented, allow a single space however + if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and + !($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) { + if (WARN("INDENTED_LABEL", + "labels should not be indented\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/^(.)\s+/$1/; + } + } + +# Return is not a function. + if (defined($stat) && $stat =~ /^.\s*return(\s*)\(/s) { + my $spacing = $1; + if ($^V && $^V ge 5.10.0 && + $stat =~ /^.\s*return\s*$balanced_parens\s*;\s*$/) { + ERROR("RETURN_PARENTHESES", + "return is not a function, parentheses are not required\n" . $herecurr); + + } elsif ($spacing !~ /\s+/) { + ERROR("SPACING", + "space required before the open parenthesis '('\n" . $herecurr); + } + } + +# if statements using unnecessary parentheses - ie: if ((foo == bar)) + if ($^V && $^V ge 5.10.0 && + $line =~ /\bif\s*((?:\(\s*){2,})/) { + my $openparens = $1; + my $count = $openparens =~ tr@\(@\(@; + my $msg = ""; + if ($line =~ /\bif\s*(?:\(\s*){$count,$count}$LvalOrFunc\s*($Compare)\s*$LvalOrFunc(?:\s*\)){$count,$count}/) { + my $comp = $4; #Not $1 because of $LvalOrFunc + $msg = " - maybe == should be = ?" if ($comp eq "=="); + WARN("UNNECESSARY_PARENTHESES", + "Unnecessary parentheses$msg\n" . $herecurr); + } + } + +# Return of what appears to be an errno should normally be -'ve + if ($line =~ /^.\s*return\s*(E[A-Z]*)\s*;/) { + my $name = $1; + if ($name ne 'EOF' && $name ne 'ERROR') { + WARN("USE_NEGATIVE_ERRNO", + "return of an errno should typically be -ve (return -$1)\n" . $herecurr); + } + } + +# Need a space before open parenthesis after if, while etc + if ($line =~ /\b(if|while|for|switch)\(/) { + if (ERROR("SPACING", + "space required before the open parenthesis '('\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/\b(if|while|for|switch)\(/$1 \(/; + } + } + +# Check for illegal assignment in if conditional -- and check for trailing +# statements after the conditional. + if ($line =~ /do\s*(?!{)/) { + ($stat, $cond, $line_nr_next, $remain_next, $off_next) = + ctx_statement_block($linenr, $realcnt, 0) + if (!defined $stat); + my ($stat_next) = ctx_statement_block($line_nr_next, + $remain_next, $off_next); + $stat_next =~ s/\n./\n /g; + ##print "stat<$stat> stat_next<$stat_next>\n"; + + if ($stat_next =~ /^\s*while\b/) { + # If the statement carries leading newlines, + # then count those as offsets. + my ($whitespace) = + ($stat_next =~ /^((?:\s*\n[+-])*\s*)/s); + my $offset = + statement_rawlines($whitespace) - 1; + + $suppress_whiletrailers{$line_nr_next + + $offset} = 1; + } + } + if (!defined $suppress_whiletrailers{$linenr} && + defined($stat) && defined($cond) && + $line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) { + my ($s, $c) = ($stat, $cond); + + if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/s) { + ERROR("ASSIGN_IN_IF", + "do not use assignment in if condition\n" . $herecurr); + } + + # Find out what is on the end of the line after the + # conditional. + substr($s, 0, length($c), ''); + $s =~ s/\n.*//g; + $s =~ s/$;//g; # Remove any comments + if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ && + $c !~ /}\s*while\s*/) + { + # Find out how long the conditional actually is. + my @newlines = ($c =~ /\n/gs); + my $cond_lines = 1 + $#newlines; + my $stat_real = ''; + + $stat_real = raw_line($linenr, $cond_lines) + . "\n" if ($cond_lines); + if (defined($stat_real) && $cond_lines > 1) { + $stat_real = "[...]\n$stat_real"; + } + + ERROR("TRAILING_STATEMENTS", + "trailing statements should be on next line\n" . $herecurr . $stat_real); + } + } + +# Check for bitwise tests written as boolean + if ($line =~ / + (?: + (?:\[|\(|\&\&|\|\|) + \s*0[xX][0-9]+\s* + (?:\&\&|\|\|) + | + (?:\&\&|\|\|) + \s*0[xX][0-9]+\s* + (?:\&\&|\|\||\)|\]) + )/x) + { + WARN("HEXADECIMAL_BOOLEAN_TEST", + "boolean test with hexadecimal, perhaps just 1 \& or \|?\n" . $herecurr); + } + +# if and else should not have general statements after it + if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) { + my $s = $1; + $s =~ s/$;//g; # Remove any comments + if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) { + ERROR("TRAILING_STATEMENTS", + "trailing statements should be on next line\n" . $herecurr); + } + } +# if should not continue a brace + if ($line =~ /}\s*if\b/) { + ERROR("TRAILING_STATEMENTS", + "trailing statements should be on next line\n" . + $herecurr); + } +# case and default should not have general statements after them + if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g && + $line !~ /\G(?: + (?:\s*$;*)(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$| + \s*return\s+ + )/xg) + { + ERROR("TRAILING_STATEMENTS", + "trailing statements should be on next line\n" . $herecurr); + } + + # Check for }else {, these must be at the same + # indent level to be relevant to each other. + if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and + $previndent == $indent) { + ERROR("ELSE_AFTER_BRACE", + "else should follow close brace '}'\n" . $hereprev); + } + + if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and + $previndent == $indent) { + my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0); + + # Find out what is on the end of the line after the + # conditional. + substr($s, 0, length($c), ''); + $s =~ s/\n.*//g; + + if ($s =~ /^\s*;/) { + ERROR("WHILE_AFTER_BRACE", + "while should follow close brace '}'\n" . $hereprev); + } + } + +#Specific variable tests + while ($line =~ m{($Constant|$Lval)}g) { + my $var = $1; + +#gcc binary extension + if ($var =~ /^$Binary$/) { + if (WARN("GCC_BINARY_CONSTANT", + "Avoid gcc v4.3+ binary constant extension: <$var>\n" . $herecurr) && + $fix) { + my $hexval = sprintf("0x%x", oct($var)); + $fixed[$linenr - 1] =~ + s/\b$var\b/$hexval/; + } + } + +#CamelCase + if ($var !~ /^$Constant$/ && + $var =~ /[A-Z][a-z]|[a-z][A-Z]/ && +#Ignore Page variants + $var !~ /^(?:Clear|Set|TestClear|TestSet|)Page[A-Z]/ && +#Ignore SI style variants like nS, mV and dB (ie: max_uV, regulator_min_uA_show) + $var !~ /^(?:[a-z_]*?)_?[a-z][A-Z](?:_[a-z_]+)?$/) { + while ($var =~ m{($Ident)}g) { + my $word = $1; + next if ($word !~ /[A-Z][a-z]|[a-z][A-Z]/); + if ($check) { + seed_camelcase_includes(); + if (!$file && !$camelcase_file_seeded) { + seed_camelcase_file($realfile); + $camelcase_file_seeded = 1; + } + } + if (!defined $camelcase{$word}) { + $camelcase{$word} = 1; + CHK("CAMELCASE", + "Avoid CamelCase: <$word>\n" . $herecurr); + } + } + } + } + +#no spaces allowed after \ in define + if ($line =~ /\#\s*define.*\\\s+$/) { + if (WARN("WHITESPACE_AFTER_LINE_CONTINUATION", + "Whitespace after \\ makes next lines useless\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\s+$//; + } + } + +#warn if is #included and is available (uses RAW line) + if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\}) { + my $file = "$1.h"; + my $checkfile = "include/linux/$file"; + if (-f "$root/$checkfile" && + $realfile ne $checkfile && + $1 !~ /$allowed_asm_includes/) + { + if ($realfile =~ m{^arch/}) { + CHK("ARCH_INCLUDE_LINUX", + "Consider using #include instead of \n" . $herecurr); + } else { + WARN("INCLUDE_LINUX", + "Use #include instead of \n" . $herecurr); + } + } + } + +# multi-statement macros should be enclosed in a do while loop, grab the +# first statement and ensure its the whole macro if its not enclosed +# in a known good container + if ($realfile !~ m@/vmlinux.lds.h$@ && + $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) { + my $ln = $linenr; + my $cnt = $realcnt; + my ($off, $dstat, $dcond, $rest); + my $ctx = ''; + ($dstat, $dcond, $ln, $cnt, $off) = + ctx_statement_block($linenr, $realcnt, 0); + $ctx = $dstat; + #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n"; + #print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n"; + + $dstat =~ s/^.\s*\#\s*define\s+$Ident(?:\([^\)]*\))?\s*//; + $dstat =~ s/$;//g; + $dstat =~ s/\\\n.//g; + $dstat =~ s/^\s*//s; + $dstat =~ s/\s*$//s; + + # Flatten any parentheses and braces + while ($dstat =~ s/\([^\(\)]*\)/1/ || + $dstat =~ s/\{[^\{\}]*\}/1/ || + $dstat =~ s/\[[^\[\]]*\]/1/) + { + } + + # Flatten any obvious string concatentation. + while ($dstat =~ s/("X*")\s*$Ident/$1/ || + $dstat =~ s/$Ident\s*("X*")/$1/) + { + } + + my $exceptions = qr{ + $Declare| + module_param_named| + MODULE_PARM_DESC| + DECLARE_PER_CPU| + DEFINE_PER_CPU| + __typeof__\(| + union| + struct| + \.$Ident\s*=\s*| + ^\"|\"$ + }x; + #print "REST<$rest> dstat<$dstat> ctx<$ctx>\n"; + if ($dstat ne '' && + $dstat !~ /^(?:$Ident|-?$Constant),$/ && # 10, // foo(), + $dstat !~ /^(?:$Ident|-?$Constant);$/ && # foo(); + $dstat !~ /^[!~-]?(?:$Lval|$Constant)$/ && # 10 // foo() // !foo // ~foo // -foo // foo->bar // foo.bar->baz + $dstat !~ /^'X'$/ && # character constants + $dstat !~ /$exceptions/ && + $dstat !~ /^\.$Ident\s*=/ && # .foo = + $dstat !~ /^(?:\#\s*$Ident|\#\s*$Constant)\s*$/ && # stringification #foo + $dstat !~ /^do\s*$Constant\s*while\s*$Constant;?$/ && # do {...} while (...); // do {...} while (...) + $dstat !~ /^for\s*$Constant$/ && # for (...) + $dstat !~ /^for\s*$Constant\s+(?:$Ident|-?$Constant)$/ && # for (...) bar() + $dstat !~ /^do\s*{/ && # do {... + $dstat !~ /^\({/ && # ({... + $ctx !~ /^.\s*#\s*define\s+TRACE_(?:SYSTEM|INCLUDE_FILE|INCLUDE_PATH)\b/) + { + $ctx =~ s/\n*$//; + my $herectx = $here . "\n"; + my $cnt = statement_rawlines($ctx); + + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + + if ($dstat =~ /;/) { + ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE", + "Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx"); + } else { + ERROR("COMPLEX_MACRO", + "Macros with complex values should be enclosed in parenthesis\n" . "$herectx"); + } + } + +# check for line continuations outside of #defines, preprocessor #, and asm + + } else { + if ($prevline !~ /^..*\\$/ && + $line !~ /^\+\s*\#.*\\$/ && # preprocessor + $line !~ /^\+.*\b(__asm__|asm)\b.*\\$/ && # asm + $line =~ /^\+.*\\$/) { + WARN("LINE_CONTINUATIONS", + "Avoid unnecessary line continuations\n" . $herecurr); + } + } + +# do {} while (0) macro tests: +# single-statement macros do not need to be enclosed in do while (0) loop, +# macro should not end with a semicolon + if ($^V && $^V ge 5.10.0 && + $realfile !~ m@/vmlinux.lds.h$@ && + $line =~ /^.\s*\#\s*define\s+$Ident(\()?/) { + my $ln = $linenr; + my $cnt = $realcnt; + my ($off, $dstat, $dcond, $rest); + my $ctx = ''; + ($dstat, $dcond, $ln, $cnt, $off) = + ctx_statement_block($linenr, $realcnt, 0); + $ctx = $dstat; + + $dstat =~ s/\\\n.//g; + + if ($dstat =~ /^\+\s*#\s*define\s+$Ident\s*${balanced_parens}\s*do\s*{(.*)\s*}\s*while\s*\(\s*0\s*\)\s*([;\s]*)\s*$/) { + my $stmts = $2; + my $semis = $3; + + $ctx =~ s/\n*$//; + my $cnt = statement_rawlines($ctx); + my $herectx = $here . "\n"; + + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + + if (($stmts =~ tr/;/;/) == 1 && + $stmts !~ /^\s*(if|while|for|switch)\b/) { + WARN("SINGLE_STATEMENT_DO_WHILE_MACRO", + "Single statement macros should not use a do {} while (0) loop\n" . "$herectx"); + } + if (defined $semis && $semis ne "") { + WARN("DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON", + "do {} while (0) macros should not be semicolon terminated\n" . "$herectx"); + } + } + } + +# make sure symbols are always wrapped with VMLINUX_SYMBOL() ... +# all assignments may have only one of the following with an assignment: +# . +# ALIGN(...) +# VMLINUX_SYMBOL(...) + if ($realfile eq 'vmlinux.lds.h' && $line =~ /(?:(?:^|\s)$Ident\s*=|=\s*$Ident(?:\s|$))/) { + WARN("MISSING_VMLINUX_SYMBOL", + "vmlinux.lds.h needs VMLINUX_SYMBOL() around C-visible symbols\n" . $herecurr); + } + +# check for redundant bracing round if etc + if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) { + my ($level, $endln, @chunks) = + ctx_statement_full($linenr, $realcnt, 1); + #print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n"; + #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n"; + if ($#chunks > 0 && $level == 0) { + my @allowed = (); + my $allow = 0; + my $seen = 0; + my $herectx = $here . "\n"; + my $ln = $linenr - 1; + for my $chunk (@chunks) { + my ($cond, $block) = @{$chunk}; + + # If the condition carries leading newlines, then count those as offsets. + my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s); + my $offset = statement_rawlines($whitespace) - 1; + + $allowed[$allow] = 0; + #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n"; + + # We have looked at and allowed this specific line. + $suppress_ifbraces{$ln + $offset} = 1; + + $herectx .= "$rawlines[$ln + $offset]\n[...]\n"; + $ln += statement_rawlines($block) - 1; + + substr($block, 0, length($cond), ''); + + $seen++ if ($block =~ /^\s*{/); + + #print "cond<$cond> block<$block> allowed<$allowed[$allow]>\n"; + if (statement_lines($cond) > 1) { + #print "APW: ALLOWED: cond<$cond>\n"; + $allowed[$allow] = 1; + } + if ($block =~/\b(?:if|for|while)\b/) { + #print "APW: ALLOWED: block<$block>\n"; + $allowed[$allow] = 1; + } + if (statement_block_size($block) > 1) { + #print "APW: ALLOWED: lines block<$block>\n"; + $allowed[$allow] = 1; + } + $allow++; + } + if ($seen) { + my $sum_allowed = 0; + foreach (@allowed) { + $sum_allowed += $_; + } + if ($sum_allowed == 0) { + WARN("BRACES", + "braces {} are not necessary for any arm of this statement\n" . $herectx); + } elsif ($sum_allowed != $allow && + $seen != $allow) { + CHK("BRACES", + "braces {} should be used on all arms of this statement\n" . $herectx); + } + } + } + } + if (!defined $suppress_ifbraces{$linenr - 1} && + $line =~ /\b(if|while|for|else)\b/) { + my $allowed = 0; + + # Check the pre-context. + if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) { + #print "APW: ALLOWED: pre<$1>\n"; + $allowed = 1; + } + + my ($level, $endln, @chunks) = + ctx_statement_full($linenr, $realcnt, $-[0]); + + # Check the condition. + my ($cond, $block) = @{$chunks[0]}; + #print "CHECKING<$linenr> cond<$cond> block<$block>\n"; + if (defined $cond) { + substr($block, 0, length($cond), ''); + } + if (statement_lines($cond) > 1) { + #print "APW: ALLOWED: cond<$cond>\n"; + $allowed = 1; + } + if ($block =~/\b(?:if|for|while)\b/) { + #print "APW: ALLOWED: block<$block>\n"; + $allowed = 1; + } + if (statement_block_size($block) > 1) { + #print "APW: ALLOWED: lines block<$block>\n"; + $allowed = 1; + } + # Check the post-context. + if (defined $chunks[1]) { + my ($cond, $block) = @{$chunks[1]}; + if (defined $cond) { + substr($block, 0, length($cond), ''); + } + if ($block =~ /^\s*\{/) { + #print "APW: ALLOWED: chunk-1 block<$block>\n"; + $allowed = 1; + } + } + if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) { + my $herectx = $here . "\n"; + my $cnt = statement_rawlines($block); + + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + + WARN("BRACES", + "braces {} are not necessary for single statement blocks\n" . $herectx); + } + } + +# check for unnecessary blank lines around braces + if (($line =~ /^.\s*}\s*$/ && $prevrawline =~ /^.\s*$/)) { + CHK("BRACES", + "Blank lines aren't necessary before a close brace '}'\n" . $hereprev); + } + if (($rawline =~ /^.\s*$/ && $prevline =~ /^..*{\s*$/)) { + CHK("BRACES", + "Blank lines aren't necessary after an open brace '{'\n" . $hereprev); + } + +# no volatiles please + my $asm_volatile = qr{\b(__asm__|asm)\s+(__volatile__|volatile)\b}; + if ($line =~ /\bvolatile\b/ && $line !~ /$asm_volatile/) { + WARN("VOLATILE", + "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr); + } + +# warn about #if 0 + if ($line =~ /^.\s*\#\s*if\s+0\b/) { + CHK("REDUNDANT_CODE", + "if this code is redundant consider removing it\n" . + $herecurr); + } + +# check for needless "if () fn()" uses + if ($prevline =~ /\bif\s*\(\s*($Lval)\s*\)/) { + my $expr = '\s*\(\s*' . quotemeta($1) . '\s*\)\s*;'; + if ($line =~ /\b(kfree|usb_free_urb|debugfs_remove(?:_recursive)?)$expr/) { + WARN('NEEDLESS_IF', + "$1(NULL) is safe this check is probably not required\n" . $hereprev); + } + } + +# check for bad placement of section $InitAttribute (e.g.: __initdata) + if ($line =~ /(\b$InitAttribute\b)/) { + my $attr = $1; + if ($line =~ /^\+\s*static\s+(?:const\s+)?(?:$attr\s+)?($NonptrTypeWithAttr)\s+(?:$attr\s+)?($Ident(?:\[[^]]*\])?)\s*[=;]/) { + my $ptr = $1; + my $var = $2; + if ((($ptr =~ /\b(union|struct)\s+$attr\b/ && + ERROR("MISPLACED_INIT", + "$attr should be placed after $var\n" . $herecurr)) || + ($ptr !~ /\b(union|struct)\s+$attr\b/ && + WARN("MISPLACED_INIT", + "$attr should be placed after $var\n" . $herecurr))) && + $fix) { + $fixed[$linenr - 1] =~ s/(\bstatic\s+(?:const\s+)?)(?:$attr\s+)?($NonptrTypeWithAttr)\s+(?:$attr\s+)?($Ident(?:\[[^]]*\])?)\s*([=;])\s*/"$1" . trim(string_find_replace($2, "\\s*$attr\\s*", " ")) . " " . trim(string_find_replace($3, "\\s*$attr\\s*", "")) . " $attr" . ("$4" eq ";" ? ";" : " = ")/e; + } + } + } + +# check for $InitAttributeData (ie: __initdata) with const + if ($line =~ /\bconst\b/ && $line =~ /($InitAttributeData)/) { + my $attr = $1; + $attr =~ /($InitAttributePrefix)(.*)/; + my $attr_prefix = $1; + my $attr_type = $2; + if (ERROR("INIT_ATTRIBUTE", + "Use of const init definition must use ${attr_prefix}initconst\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/$InitAttributeData/${attr_prefix}initconst/; + } + } + +# check for $InitAttributeConst (ie: __initconst) without const + if ($line !~ /\bconst\b/ && $line =~ /($InitAttributeConst)/) { + my $attr = $1; + if (ERROR("INIT_ATTRIBUTE", + "Use of $attr requires a separate use of const\n" . $herecurr) && + $fix) { + my $lead = $fixed[$linenr - 1] =~ + /(^\+\s*(?:static\s+))/; + $lead = rtrim($1); + $lead = "$lead " if ($lead !~ /^\+$/); + $lead = "${lead}const "; + $fixed[$linenr - 1] =~ s/(^\+\s*(?:static\s+))/$lead/; + } + } + +# prefer usleep_range over udelay + if ($line =~ /\budelay\s*\(\s*(\d+)\s*\)/) { + # ignore udelay's < 10, however + if (! ($1 < 10) ) { + CHK("USLEEP_RANGE", + "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $line); + } + } + +# warn about unexpectedly long msleep's + if ($line =~ /\bmsleep\s*\((\d+)\);/) { + if ($1 < 20) { + WARN("MSLEEP", + "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $line); + } + } + +# check for comparisons of jiffies + if ($line =~ /\bjiffies\s*$Compare|$Compare\s*jiffies\b/) { + WARN("JIFFIES_COMPARISON", + "Comparing jiffies is almost always wrong; prefer time_after, time_before and friends\n" . $herecurr); + } + +# check for comparisons of get_jiffies_64() + if ($line =~ /\bget_jiffies_64\s*\(\s*\)\s*$Compare|$Compare\s*get_jiffies_64\s*\(\s*\)/) { + WARN("JIFFIES_COMPARISON", + "Comparing get_jiffies_64() is almost always wrong; prefer time_after64, time_before64 and friends\n" . $herecurr); + } + +# warn about #ifdefs in C files +# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { +# print "#ifdef in C files should be avoided\n"; +# print "$herecurr"; +# $clean = 0; +# } + +# warn about spacing in #ifdefs + if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) { + if (ERROR("SPACING", + "exactly one space required after that #$1\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ + s/^(.\s*\#\s*(ifdef|ifndef|elif))\s{2,}/$1 /; + } + + } + +# check for spinlock_t definitions without a comment. + if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/ || + $line =~ /^.\s*(DEFINE_MUTEX)\s*\(/) { + my $which = $1; + if (!ctx_has_comment($first_line, $linenr)) { + CHK("UNCOMMENTED_DEFINITION", + "$1 definition without comment\n" . $herecurr); + } + } +# check for memory barriers without a comment. + if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) { + if (!ctx_has_comment($first_line, $linenr)) { + WARN("MEMORY_BARRIER", + "memory barrier without comment\n" . $herecurr); + } + } +# check of hardware specific defines + if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { + CHK("ARCH_DEFINES", + "architecture specific defines should be avoided\n" . $herecurr); + } + +# Check that the storage class is at the beginning of a declaration + if ($line =~ /\b$Storage\b/ && $line !~ /^.\s*$Storage\b/) { + WARN("STORAGE_CLASS", + "storage class should be at the beginning of the declaration\n" . $herecurr) + } + +# check the location of the inline attribute, that it is between +# storage class and type. + if ($line =~ /\b$Type\s+$Inline\b/ || + $line =~ /\b$Inline\s+$Storage\b/) { + ERROR("INLINE_LOCATION", + "inline keyword should sit between storage class and type\n" . $herecurr); + } + +# Check for __inline__ and __inline, prefer inline + if ($realfile !~ m@\binclude/uapi/@ && + $line =~ /\b(__inline__|__inline)\b/) { + if (WARN("INLINE", + "plain inline is preferred over $1\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\b(__inline__|__inline)\b/inline/; + + } + } + +# Check for __attribute__ packed, prefer __packed + if ($realfile !~ m@\binclude/uapi/@ && + $line =~ /\b__attribute__\s*\(\s*\(.*\bpacked\b/) { + WARN("PREFER_PACKED", + "__packed is preferred over __attribute__((packed))\n" . $herecurr); + } +# Check for new packed members, warn to use care + if ($line =~ /\b(__attribute__\s*\(\s*\(.*\bpacked|__packed)\b/) { + WARN("NEW_PACKED", + "Adding new packed members is to be done with care\n" . $herecurr); + } + +# Check for __attribute__ aligned, prefer __aligned + if ($realfile !~ m@\binclude/uapi/@ && + $line =~ /\b__attribute__\s*\(\s*\(.*aligned/) { + WARN("PREFER_ALIGNED", + "__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr); + } + +# Check for __attribute__ format(printf, prefer __printf + if ($realfile !~ m@\binclude/uapi/@ && + $line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) { + if (WARN("PREFER_PRINTF", + "__printf(string-index, first-to-check) is preferred over __attribute__((format(printf, string-index, first-to-check)))\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.*)\)\s*\)\s*\)/"__printf(" . trim($1) . ")"/ex; + + } + } + +# Check for __attribute__ format(scanf, prefer __scanf + if ($realfile !~ m@\binclude/uapi/@ && + $line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\b/) { + if (WARN("PREFER_SCANF", + "__scanf(string-index, first-to-check) is preferred over __attribute__((format(scanf, string-index, first-to-check)))\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\s*,\s*(.*)\)\s*\)\s*\)/"__scanf(" . trim($1) . ")"/ex; + } + } + +# check for sizeof(&) + if ($line =~ /\bsizeof\s*\(\s*\&/) { + WARN("SIZEOF_ADDRESS", + "sizeof(& should be avoided\n" . $herecurr); + } + +# check for sizeof without parenthesis + if ($line =~ /\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/) { + if (WARN("SIZEOF_PARENTHESIS", + "sizeof $1 should be sizeof($1)\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/"sizeof(" . trim($1) . ")"/ex; + } + } + +# check for line continuations in quoted strings with odd counts of " + if ($rawline =~ /\\$/ && $rawline =~ tr/"/"/ % 2) { + WARN("LINE_CONTINUATIONS", + "Avoid line continuations in quoted strings\n" . $herecurr); + } + +# check for struct spinlock declarations + if ($line =~ /^.\s*\bstruct\s+spinlock\s+\w+\s*;/) { + WARN("USE_SPINLOCK_T", + "struct spinlock should be spinlock_t\n" . $herecurr); + } + +# check for seq_printf uses that could be seq_puts + if ($sline =~ /\bseq_printf\s*\(.*"\s*\)\s*;\s*$/) { + my $fmt = get_quoted_string($line, $rawline); + if ($fmt ne "" && $fmt !~ /[^\\]\%/) { + if (WARN("PREFER_SEQ_PUTS", + "Prefer seq_puts to seq_printf\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\bseq_printf\b/seq_puts/; + } + } + } + +# Check for misused memsets + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*$FuncArg\s*\)/s) { + + my $ms_addr = $2; + my $ms_val = $7; + my $ms_size = $12; + + if ($ms_size =~ /^(0x|)0$/i) { + ERROR("MEMSET", + "memset to 0's uses 0 as the 2nd argument, not the 3rd\n" . "$here\n$stat\n"); + } elsif ($ms_size =~ /^(0x|)1$/i) { + WARN("MEMSET", + "single byte memset is suspicious. Swapped 2nd/3rd argument?\n" . "$here\n$stat\n"); + } + } + +# Check for memcpy(foo, bar, ETH_ALEN) that could be ether_addr_copy(foo, bar) + if ($^V && $^V ge 5.10.0 && + $line =~ /^\+(?:.*?)\bmemcpy\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) { + if (WARN("PREFER_ETHER_ADDR_COPY", + "Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\bmemcpy\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/ether_addr_copy($2, $7)/; + } + } + +# typecasts on min/max could be min_t/max_t + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\b(min|max)\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\)/) { + if (defined $2 || defined $7) { + my $call = $1; + my $cast1 = deparenthesize($2); + my $arg1 = $3; + my $cast2 = deparenthesize($7); + my $arg2 = $8; + my $cast; + + if ($cast1 ne "" && $cast2 ne "" && $cast1 ne $cast2) { + $cast = "$cast1 or $cast2"; + } elsif ($cast1 ne "") { + $cast = $cast1; + } else { + $cast = $cast2; + } + WARN("MINMAX", + "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . "$here\n$stat\n"); + } + } + +# check usleep_range arguments + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\busleep_range\s*\(\s*($FuncArg)\s*,\s*($FuncArg)\s*\)/) { + my $min = $1; + my $max = $7; + if ($min eq $max) { + WARN("USLEEP_RANGE", + "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); + } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ && + $min > $max) { + WARN("USLEEP_RANGE", + "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); + } + } + +# check for naked sscanf + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /\bsscanf\b/ && + ($stat !~ /$Ident\s*=\s*sscanf\s*$balanced_parens/ && + $stat !~ /\bsscanf\s*$balanced_parens\s*(?:$Compare)/ && + $stat !~ /(?:$Compare)\s*\bsscanf\s*$balanced_parens/)) { + my $lc = $stat =~ tr@\n@@; + $lc = $lc + $linenr; + my $stat_real = raw_line($linenr, 0); + for (my $count = $linenr + 1; $count <= $lc; $count++) { + $stat_real = $stat_real . "\n" . raw_line($count, 0); + } + WARN("NAKED_SSCANF", + "unchecked sscanf return value\n" . "$here\n$stat_real\n"); + } + +# check for new externs in .h files. + if ($realfile =~ /\.h$/ && + $line =~ /^\+\s*(extern\s+)$Type\s*$Ident\s*\(/s) { + if (CHK("AVOID_EXTERNS", + "extern prototypes should be avoided in .h files\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/(.*)\bextern\b\s*(.*)/$1$2/; + } + } + +# check for new externs in .c files. + if ($realfile =~ /\.c$/ && defined $stat && + $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s) + { + my $function_name = $1; + my $paren_space = $2; + + my $s = $stat; + if (defined $cond) { + substr($s, 0, length($cond), ''); + } + if ($s =~ /^\s*;/ && + $function_name ne 'uninitialized_var') + { + WARN("AVOID_EXTERNS", + "externs should be avoided in .c files\n" . $herecurr); + } + + if ($paren_space =~ /\n/) { + WARN("FUNCTION_ARGUMENTS", + "arguments for function declarations should follow identifier\n" . $herecurr); + } + + } elsif ($realfile =~ /\.c$/ && defined $stat && + $stat =~ /^.\s*extern\s+/) + { + WARN("AVOID_EXTERNS", + "externs should be avoided in .c files\n" . $herecurr); + } + +# checks for new __setup's + if ($rawline =~ /\b__setup\("([^"]*)"/) { + my $name = $1; + + if (!grep(/$name/, @setup_docs)) { + CHK("UNDOCUMENTED_SETUP", + "__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr); + } + } + +# check for pointless casting of kmalloc return + if ($line =~ /\*\s*\)\s*[kv][czm]alloc(_node){0,1}\b/) { + WARN("UNNECESSARY_CASTS", + "unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr); + } + +# alloc style +# p = alloc(sizeof(struct foo), ...) should be p = alloc(sizeof(*p), ...) + if ($^V && $^V ge 5.10.0 && + $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*([kv][mz]alloc(?:_node)?)\s*\(\s*(sizeof\s*\(\s*struct\s+$Lval\s*\))/) { + CHK("ALLOC_SIZEOF_STRUCT", + "Prefer $3(sizeof(*$1)...) over $3($4...)\n" . $herecurr); + } + +# check for krealloc arg reuse + if ($^V && $^V ge 5.10.0 && + $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*krealloc\s*\(\s*\1\s*,/) { + WARN("KREALLOC_ARG_REUSE", + "Reusing the krealloc arg is almost always a bug\n" . $herecurr); + } + +# check for alloc argument mismatch + if ($line =~ /\b(kcalloc|kmalloc_array)\s*\(\s*sizeof\b/) { + WARN("ALLOC_ARRAY_ARGS", + "$1 uses number as first arg, sizeof is generally wrong\n" . $herecurr); + } + +# check for GFP_NOWAIT use + if ($line =~ /\b__GFP_NOFAIL\b/) { + WARN("__GFP_NOFAIL", + "Use of __GFP_NOFAIL is deprecated, no new users should be added\n" . $herecurr); + } + +# check for multiple semicolons + if ($line =~ /;\s*;\s*$/) { + if (WARN("ONE_SEMICOLON", + "Statements terminations use 1 semicolon\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/(\s*;\s*){2,}$/;/g; + } + } + +# check for case / default statements not preceeded by break/fallthrough/switch + if ($line =~ /^.\s*(?:case\s+(?:$Ident|$Constant)\s*|default):/) { + my $has_break = 0; + my $has_statement = 0; + my $count = 0; + my $prevline = $linenr; + while ($prevline > 1 && $count < 3 && !$has_break) { + $prevline--; + my $rline = $rawlines[$prevline - 1]; + my $fline = $lines[$prevline - 1]; + last if ($fline =~ /^\@\@/); + next if ($fline =~ /^\-/); + next if ($fline =~ /^.(?:\s*(?:case\s+(?:$Ident|$Constant)[\s$;]*|default):[\s$;]*)*$/); + $has_break = 1 if ($rline =~ /fall[\s_-]*(through|thru)/i); + next if ($fline =~ /^.[\s$;]*$/); + $has_statement = 1; + $count++; + $has_break = 1 if ($fline =~ /\bswitch\b|\b(?:break\s*;[\s$;]*$|return\b|goto\b|continue\b)/); + } + if (!$has_break && $has_statement) { + WARN("MISSING_BREAK", + "Possible switch case/default not preceeded by break or fallthrough comment\n" . $herecurr); + } + } + +# check for switch/default statements without a break; + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+[$;\s]*(?:case[$;\s]+\w+[$;\s]*:[$;\s]*|)*[$;\s]*\bdefault[$;\s]*:[$;\s]*;/g) { + my $ctx = ''; + my $herectx = $here . "\n"; + my $cnt = statement_rawlines($stat); + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + WARN("DEFAULT_NO_BREAK", + "switch default: should use break\n" . $herectx); + } + +# check for gcc specific __FUNCTION__ + if ($line =~ /\b__FUNCTION__\b/) { + if (WARN("USE_FUNC", + "__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr) && + $fix) { + $fixed[$linenr - 1] =~ s/\b__FUNCTION__\b/__func__/g; + } + } + +# check for use of yield() + if ($line =~ /\byield\s*\(\s*\)/) { + WARN("YIELD", + "Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)\n" . $herecurr); + } + +# check for comparisons against true and false + if ($line =~ /\+\s*(.*?)\b(true|false|$Lval)\s*(==|\!=)\s*(true|false|$Lval)\b(.*)$/i) { + my $lead = $1; + my $arg = $2; + my $test = $3; + my $otype = $4; + my $trail = $5; + my $op = "!"; + + ($arg, $otype) = ($otype, $arg) if ($arg =~ /^(?:true|false)$/i); + + my $type = lc($otype); + if ($type =~ /^(?:true|false)$/) { + if (("$test" eq "==" && "$type" eq "true") || + ("$test" eq "!=" && "$type" eq "false")) { + $op = ""; + } + + CHK("BOOL_COMPARISON", + "Using comparison to $otype is error prone\n" . $herecurr); + +## maybe suggesting a correct construct would better +## "Using comparison to $otype is error prone. Perhaps use '${lead}${op}${arg}${trail}'\n" . $herecurr); + + } + } + +# check for semaphores initialized locked + if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) { + WARN("CONSIDER_COMPLETION", + "consider using a completion\n" . $herecurr); + } + +# recommend kstrto* over simple_strto* and strict_strto* + if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) { + WARN("CONSIDER_KSTRTO", + "$1 is obsolete, use k$3 instead\n" . $herecurr); + } + +# check for __initcall(), use device_initcall() explicitly please + if ($line =~ /^.\s*__initcall\s*\(/) { + WARN("USE_DEVICE_INITCALL", + "please use device_initcall() instead of __initcall()\n" . $herecurr); + } + +# check for various ops structs, ensure they are const. + my $struct_ops = qr{acpi_dock_ops| + address_space_operations| + backlight_ops| + block_device_operations| + dentry_operations| + dev_pm_ops| + dma_map_ops| + extent_io_ops| + file_lock_operations| + file_operations| + hv_ops| + ide_dma_ops| + intel_dvo_dev_ops| + item_operations| + iwl_ops| + kgdb_arch| + kgdb_io| + kset_uevent_ops| + lock_manager_operations| + microcode_ops| + mtrr_ops| + neigh_ops| + nlmsvc_binding| + pci_raw_ops| + pipe_buf_operations| + platform_hibernation_ops| + platform_suspend_ops| + proto_ops| + rpc_pipe_ops| + seq_operations| + snd_ac97_build_ops| + soc_pcmcia_socket_ops| + stacktrace_ops| + sysfs_ops| + tty_operations| + usb_mon_operations| + wd_ops}x; + if ($line !~ /\bconst\b/ && + $line =~ /\bstruct\s+($struct_ops)\b/) { + WARN("CONST_STRUCT", + "struct $1 should normally be const\n" . + $herecurr); + } + +# use of NR_CPUS is usually wrong +# ignore definitions of NR_CPUS and usage to define arrays as likely right + if ($line =~ /\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ && + $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ && + $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/) + { + WARN("NR_CPUS", + "usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr); + } + +# Use of __ARCH_HAS_ or ARCH_HAVE_ is wrong. + if ($line =~ /\+\s*#\s*define\s+((?:__)?ARCH_(?:HAS|HAVE)\w*)\b/) { + ERROR("DEFINE_ARCH_HAS", + "#define of '$1' is wrong - use Kconfig variables or standard guards instead\n" . $herecurr); + } + +# check for %L{u,d,i} in strings + my $string; + while ($line =~ /(?:^|")([X\t]*)(?:"|$)/g) { + $string = substr($rawline, $-[1], $+[1] - $-[1]); + $string =~ s/%%/__/g; + if ($string =~ /(?mutex.\n" . $herecurr); + } + } + + if ($line =~ /debugfs_create_file.*S_IWUGO/ || + $line =~ /DEVICE_ATTR.*S_IWUGO/ ) { + WARN("EXPORTED_WORLD_WRITABLE", + "Exporting world writable files is usually an error. Consider more restrictive permissions.\n" . $herecurr); + } + } + + # If we have no input at all, then there is nothing to report on + # so just keep quiet. + if ($#rawlines == -1) { + exit(0); + } + + # In mailback mode only produce a report in the negative, for + # things that appear to be patches. + if ($mailback && ($clean == 1 || !$is_patch)) { + exit(0); + } + + # This is not a patch, and we are are in 'no-patch' mode so + # just keep quiet. + if (!$chk_patch && !$is_patch) { + exit(0); + } + + if (!$is_patch) { + ERROR("NOT_UNIFIED_DIFF", + "Does not appear to be a unified-diff format patch\n"); + } + if ($is_patch && $chk_signoff && $signoff == 0) { + ERROR("MISSING_SIGN_OFF", + "Missing Signed-off-by: line(s)\n"); + } + + print report_dump(); + if ($summary && !($clean == 1 && $quiet == 1)) { + print "$filename " if ($summary_file); + print "total: $cnt_error errors, $cnt_warn warnings, " . + (($check)? "$cnt_chk checks, " : "") . + "$cnt_lines lines checked\n"; + print "\n" if ($quiet == 0); + } + + if ($quiet == 0) { + + if ($^V lt 5.10.0) { + print("NOTE: perl $^V is not modern enough to detect all possible issues.\n"); + print("An upgrade to at least perl v5.10.0 is suggested.\n\n"); + } + + # If there were whitespace errors which cleanpatch can fix + # then suggest that. + if ($rpt_cleaners) { + print "NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or\n"; + print " scripts/cleanfile\n\n"; + $rpt_cleaners = 0; + } + } + + hash_show_words(\%use_type, "Used"); + hash_show_words(\%ignore_type, "Ignored"); + + if ($clean == 0 && $fix && "@rawlines" ne "@fixed") { + my $newfile = $filename; + $newfile .= ".EXPERIMENTAL-checkpatch-fixes" if (!$fix_inplace); + my $linecount = 0; + my $f; + + open($f, '>', $newfile) + or die "$P: Can't open $newfile for write\n"; + foreach my $fixed_line (@fixed) { + $linecount++; + if ($file) { + if ($linecount > 3) { + $fixed_line =~ s/^\+//; + print $f $fixed_line. "\n"; + } + } else { + print $f $fixed_line . "\n"; + } + } + close($f); + + if (!$quiet) { + print << "EOM"; +Wrote EXPERIMENTAL --fix correction(s) to '$newfile' + +Do _NOT_ trust the results written to this file. +Do _NOT_ submit these changes without inspecting them for correctness. + +This EXPERIMENTAL file is simply a convenience to help rewrite patches. +No warranties, expressed or implied... + +EOM + } + } + + if ($clean == 1 && $quiet == 0) { + print "$vname has no obvious style problems and is ready for submission.\n" + } + if ($clean == 0 && $quiet == 0) { + print << "EOM"; +$vname has style problems, please review. + +If any of these errors are false positives, please report +them to the maintainer, see CHECKPATCH in MAINTAINERS. +EOM + } + + return $clean; +} diff --git a/qemu/roms/u-boot/scripts/checkstack.pl b/qemu/roms/u-boot/scripts/checkstack.pl new file mode 100755 index 000000000..c1cdc0a92 --- /dev/null +++ b/qemu/roms/u-boot/scripts/checkstack.pl @@ -0,0 +1,171 @@ +#!/usr/bin/perl + +# Check the stack usage of functions +# +# Copyright Joern Engel +# Inspired by Linus Torvalds +# Original idea maybe from Keith Owens +# s390 port and big speedup by Arnd Bergmann +# Mips port by Juan Quintela +# IA64 port via Andreas Dilger +# Arm port by Holger Schurig +# sh64 port by Paul Mundt +# Random bits by Matt Mackall +# M68k port by Geert Uytterhoeven and Andreas Schwab +# AVR32 port by Haavard Skinnemoen (Atmel) +# PARISC port by Kyle McMartin +# sparc port by Martin Habets +# +# Usage: +# objdump -d vmlinux | scripts/checkstack.pl [arch] +# +# TODO : Port to all architectures (one regex per arch) + +use strict; + +# check for arch +# +# $re is used for two matches: +# $& (whole re) matches the complete objdump line with the stack growth +# $1 (first bracket) matches the size of the stack growth +# +# $dre is similar, but for dynamic stack redutions: +# $& (whole re) matches the complete objdump line with the stack growth +# $1 (first bracket) matches the dynamic amount of the stack growth +# +# use anything else and feel the pain ;) +my (@stack, $re, $dre, $x, $xs); +{ + my $arch = shift; + if ($arch eq "") { + $arch = `uname -m`; + chomp($arch); + } + + $x = "[0-9a-f]"; # hex character + $xs = "[0-9a-f ]"; # hex character or space + if ($arch eq 'arm') { + #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64 + $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o; + } elsif ($arch eq 'avr32') { + #8000008a: 20 1d sub sp,4 + #80000ca8: fa cd 05 b0 sub sp,sp,1456 + $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o; + } elsif ($arch =~ /^i[3456]86$/) { + #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp + $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o; + $dre = qr/^.*[as][du][db] (%.*),\%esp$/o; + } elsif ($arch eq 'x86_64') { + # 2f60: 48 81 ec e8 05 00 00 sub $0x5e8,%rsp + $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%rsp$/o; + $dre = qr/^.*[as][du][db] (\%.*),\%rsp$/o; + } elsif ($arch eq 'ia64') { + #e0000000044011fc: 01 0f fc 8c adds r12=-384,r12 + $re = qr/.*adds.*r12=-(([0-9]{2}|[3-9])[0-9]{2}),r12/o; + } elsif ($arch eq 'm68k') { + # 2b6c: 4e56 fb70 linkw %fp,#-1168 + # 1df770: defc ffe4 addaw #-28,%sp + $re = qr/.*(?:linkw %fp,|addaw )#-([0-9]{1,4})(?:,%sp)?$/o; + } elsif ($arch eq 'mips64') { + #8800402c: 67bdfff0 daddiu sp,sp,-16 + $re = qr/.*daddiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o; + } elsif ($arch eq 'mips') { + #88003254: 27bdffe0 addiu sp,sp,-32 + $re = qr/.*addiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o; + } elsif ($arch eq 'parisc' || $arch eq 'parisc64') { + $re = qr/.*ldo ($x{1,8})\(sp\),sp/o; + } elsif ($arch eq 'ppc') { + #c00029f4: 94 21 ff 30 stwu r1,-208(r1) + $re = qr/.*stwu.*r1,-($x{1,8})\(r1\)/o; + } elsif ($arch eq 'ppc64') { + #XXX + $re = qr/.*stdu.*r1,-($x{1,8})\(r1\)/o; + } elsif ($arch eq 'powerpc') { + $re = qr/.*st[dw]u.*r1,-($x{1,8})\(r1\)/o; + } elsif ($arch =~ /^s390x?$/) { + # 11160: a7 fb ff 60 aghi %r15,-160 + # or + # 100092: e3 f0 ff c8 ff 71 lay %r15,-56(%r15) + $re = qr/.*(?:lay|ag?hi).*\%r15,-(([0-9]{2}|[3-9])[0-9]{2}) + (?:\(\%r15\))?$/ox; + } elsif ($arch =~ /^sh64$/) { + #XXX: we only check for the immediate case presently, + # though we will want to check for the movi/sub + # pair for larger users. -- PFM. + #a00048e0: d4fc40f0 addi.l r15,-240,r15 + $re = qr/.*addi\.l.*r15,-(([0-9]{2}|[3-9])[0-9]{2}),r15/o; + } elsif ($arch =~ /^blackfin$/) { + # 0: 00 e8 38 01 LINK 0x4e0; + $re = qr/.*[[:space:]]LINK[[:space:]]*(0x$x{1,8})/o; + } elsif ($arch eq 'sparc' || $arch eq 'sparc64') { + # f0019d10: 9d e3 bf 90 save %sp, -112, %sp + $re = qr/.*save.*%sp, -(([0-9]{2}|[3-9])[0-9]{2}), %sp/o; + } else { + print("wrong or unknown architecture \"$arch\"\n"); + exit + } +} + +# +# main() +# +my $funcre = qr/^$x* <(.*)>:$/; +my ($func, $file, $lastslash); + +while (my $line = ) { + if ($line =~ m/$funcre/) { + $func = $1; + } + elsif ($line =~ m/(.*):\s*file format/) { + $file = $1; + $file =~ s/\.ko//; + $lastslash = rindex($file, "/"); + if ($lastslash != -1) { + $file = substr($file, $lastslash + 1); + } + } + elsif ($line =~ m/$re/) { + my $size = $1; + $size = hex($size) if ($size =~ /^0x/); + + if ($size > 0xf0000000) { + $size = - $size; + $size += 0x80000000; + $size += 0x80000000; + } + next if ($size > 0x10000000); + + next if $line !~ m/^($xs*)/; + my $addr = $1; + $addr =~ s/ /0/g; + $addr = "0x$addr"; + + my $intro = "$addr $func [$file]:"; + my $padlen = 56 - length($intro); + while ($padlen > 0) { + $intro .= ' '; + $padlen -= 8; + } + next if ($size < 100); + push @stack, "$intro$size\n"; + } + elsif (defined $dre && $line =~ m/$dre/) { + my $size = "Dynamic ($1)"; + + next if $line !~ m/^($xs*)/; + my $addr = $1; + $addr =~ s/ /0/g; + $addr = "0x$addr"; + + my $intro = "$addr $func [$file]:"; + my $padlen = 56 - length($intro); + while ($padlen > 0) { + $intro .= ' '; + $padlen -= 8; + } + push @stack, "$intro$size\n"; + } +} + +# Sort output by size (last field) +print sort { ($b =~ /:\t*(\d+)$/)[0] <=> ($a =~ /:\t*(\d+)$/)[0] } @stack; diff --git a/qemu/roms/u-boot/scripts/cleanpatch b/qemu/roms/u-boot/scripts/cleanpatch new file mode 100755 index 000000000..9680d03ad --- /dev/null +++ b/qemu/roms/u-boot/scripts/cleanpatch @@ -0,0 +1,258 @@ +#!/usr/bin/perl -w +# +# Clean a patch file -- or directory of patch files -- of stealth whitespace. +# WARNING: this can be a highly destructive operation. Use with caution. +# + +use bytes; +use File::Basename; + +# Default options +$max_width = 79; + +# Clean up space-tab sequences, either by removing spaces or +# replacing them with tabs. +sub clean_space_tabs($) +{ + no bytes; # Tab alignment depends on characters + + my($li) = @_; + my($lo) = ''; + my $pos = 0; + my $nsp = 0; + my($i, $c); + + for ($i = 0; $i < length($li); $i++) { + $c = substr($li, $i, 1); + if ($c eq "\t") { + my $npos = ($pos+$nsp+8) & ~7; + my $ntab = ($npos >> 3) - ($pos >> 3); + $lo .= "\t" x $ntab; + $pos = $npos; + $nsp = 0; + } elsif ($c eq "\n" || $c eq "\r") { + $lo .= " " x $nsp; + $pos += $nsp; + $nsp = 0; + $lo .= $c; + $pos = 0; + } elsif ($c eq " ") { + $nsp++; + } else { + $lo .= " " x $nsp; + $pos += $nsp; + $nsp = 0; + $lo .= $c; + $pos++; + } + } + $lo .= " " x $nsp; + return $lo; +} + +# Compute the visual width of a string +sub strwidth($) { + no bytes; # Tab alignment depends on characters + + my($li) = @_; + my($c, $i); + my $pos = 0; + my $mlen = 0; + + for ($i = 0; $i < length($li); $i++) { + $c = substr($li,$i,1); + if ($c eq "\t") { + $pos = ($pos+8) & ~7; + } elsif ($c eq "\n") { + $mlen = $pos if ($pos > $mlen); + $pos = 0; + } else { + $pos++; + } + } + + $mlen = $pos if ($pos > $mlen); + return $mlen; +} + +$name = basename($0); + +@files = (); + +while (defined($a = shift(@ARGV))) { + if ($a =~ /^-/) { + if ($a eq '-width' || $a eq '-w') { + $max_width = shift(@ARGV)+0; + } else { + print STDERR "Usage: $name [-width #] files...\n"; + exit 1; + } + } else { + push(@files, $a); + } +} + +foreach $f ( @files ) { + print STDERR "$name: $f\n"; + + if (! -f $f) { + print STDERR "$f: not a file\n"; + next; + } + + if (!open(FILE, '+<', $f)) { + print STDERR "$name: Cannot open file: $f: $!\n"; + next; + } + + binmode FILE; + + # First, verify that it is not a binary file; consider any file + # with a zero byte to be a binary file. Is there any better, or + # additional, heuristic that should be applied? + $is_binary = 0; + + while (read(FILE, $data, 65536) > 0) { + if ($data =~ /\0/) { + $is_binary = 1; + last; + } + } + + if ($is_binary) { + print STDERR "$name: $f: binary file\n"; + next; + } + + seek(FILE, 0, 0); + + $in_bytes = 0; + $out_bytes = 0; + $lineno = 0; + + @lines = (); + + $in_hunk = 0; + $err = 0; + + while ( defined($line = ) ) { + $lineno++; + $in_bytes += length($line); + + if (!$in_hunk) { + if ($line =~ + /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@/) { + $minus_lines = $2; + $plus_lines = $4; + if ($minus_lines || $plus_lines) { + $in_hunk = 1; + @hunk_lines = ($line); + } + } else { + push(@lines, $line); + $out_bytes += length($line); + } + } else { + # We're in a hunk + + if ($line =~ /^\+/) { + $plus_lines--; + + $text = substr($line, 1); + $text =~ s/[ \t\r]*$//; # Remove trailing spaces + $text = clean_space_tabs($text); + + $l_width = strwidth($text); + if ($max_width && $l_width > $max_width) { + print STDERR + "$f:$lineno: adds line exceeds $max_width ", + "characters ($l_width)\n"; + } + + push(@hunk_lines, '+'.$text); + } elsif ($line =~ /^\-/) { + $minus_lines--; + push(@hunk_lines, $line); + } elsif ($line =~ /^ /) { + $plus_lines--; + $minus_lines--; + push(@hunk_lines, $line); + } else { + print STDERR "$name: $f: malformed patch\n"; + $err = 1; + last; + } + + if ($plus_lines < 0 || $minus_lines < 0) { + print STDERR "$name: $f: malformed patch\n"; + $err = 1; + last; + } elsif ($plus_lines == 0 && $minus_lines == 0) { + # End of a hunk. Process this hunk. + my $i; + my $l; + my @h = (); + my $adj = 0; + my $done = 0; + + for ($i = scalar(@hunk_lines)-1; $i > 0; $i--) { + $l = $hunk_lines[$i]; + if (!$done && $l eq "+\n") { + $adj++; # Skip this line + } elsif ($l =~ /^[ +]/) { + $done = 1; + unshift(@h, $l); + } else { + unshift(@h, $l); + } + } + + $l = $hunk_lines[0]; # Hunk header + undef @hunk_lines; # Free memory + + if ($adj) { + die unless + ($l =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@(.*)$/); + my $mstart = $1; + my $mlin = $2; + my $pstart = $3; + my $plin = $4; + my $tail = $5; # doesn't include the final newline + + $l = sprintf("@@ -%d,%d +%d,%d @@%s\n", + $mstart, $mlin, $pstart, $plin-$adj, + $tail); + } + unshift(@h, $l); + + # Transfer to the output array + foreach $l (@h) { + $out_bytes += length($l); + push(@lines, $l); + } + + $in_hunk = 0; + } + } + } + + if ($in_hunk) { + print STDERR "$name: $f: malformed patch\n"; + $err = 1; + } + + if (!$err) { + if ($in_bytes != $out_bytes) { + # Only write to the file if changed + seek(FILE, 0, 0); + print FILE @lines; + + if ( !defined($where = tell(FILE)) || + !truncate(FILE, $where) ) { + die "$name: Failed to truncate modified file: $f: $!\n"; + } + } + } + + close(FILE); +} diff --git a/qemu/roms/u-boot/scripts/docproc.c b/qemu/roms/u-boot/scripts/docproc.c new file mode 100644 index 000000000..2b69eaf5b --- /dev/null +++ b/qemu/roms/u-boot/scripts/docproc.c @@ -0,0 +1,580 @@ +/* + * docproc is a simple preprocessor for the template files + * used as placeholders for the kernel internal documentation. + * docproc is used for documentation-frontend and + * dependency-generator. + * The two usages have in common that they require + * some knowledge of the .tmpl syntax, therefore they + * are kept together. + * + * documentation-frontend + * Scans the template file and call kernel-doc for + * all occurrences of ![EIF]file + * Beforehand each referenced file is scanned for + * any symbols that are exported via these macros: + * EXPORT_SYMBOL(), EXPORT_SYMBOL_GPL(), & + * EXPORT_SYMBOL_GPL_FUTURE() + * This is used to create proper -function and + * -nofunction arguments in calls to kernel-doc. + * Usage: docproc doc file.tmpl + * + * dependency-generator: + * Scans the template file and list all files + * referenced in a format recognized by make. + * Usage: docproc depend file.tmpl + * Writes dependency information to stdout + * in the following format: + * file.tmpl src.c src2.c + * The filenames are obtained from the following constructs: + * !Efilename + * !Ifilename + * !Dfilename + * !Ffilename + * !Pfilename + * + */ + +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* exitstatus is used to keep track of any failing calls to kernel-doc, + * but execution continues. */ +int exitstatus = 0; + +typedef void DFL(char *); +DFL *defaultline; + +typedef void FILEONLY(char * file); +FILEONLY *internalfunctions; +FILEONLY *externalfunctions; +FILEONLY *symbolsonly; +FILEONLY *findall; + +typedef void FILELINE(char * file, char * line); +FILELINE * singlefunctions; +FILELINE * entity_system; +FILELINE * docsection; + +#define MAXLINESZ 2048 +#define MAXFILES 250 +#define KERNELDOCPATH "scripts/" +#define KERNELDOC "kernel-doc" +#define DOCBOOK "-docbook" +#define LIST "-list" +#define FUNCTION "-function" +#define NOFUNCTION "-nofunction" +#define NODOCSECTIONS "-no-doc-sections" +#define SHOWNOTFOUND "-show-not-found" + +static char *srctree, *kernsrctree; + +static char **all_list = NULL; +static int all_list_len = 0; + +static void consume_symbol(const char *sym) +{ + int i; + + for (i = 0; i < all_list_len; i++) { + if (!all_list[i]) + continue; + if (strcmp(sym, all_list[i])) + continue; + all_list[i] = NULL; + break; + } +} + +static void usage (void) +{ + fprintf(stderr, "Usage: docproc {doc|depend} file\n"); + fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n"); + fprintf(stderr, "doc: frontend when generating kernel documentation\n"); + fprintf(stderr, "depend: generate list of files referenced within file\n"); + fprintf(stderr, "Environment variable SRCTREE: absolute path to sources.\n"); + fprintf(stderr, " KBUILD_SRC: absolute path to kernel source tree.\n"); +} + +/* + * Execute kernel-doc with parameters given in svec + */ +static void exec_kernel_doc(char **svec) +{ + pid_t pid; + int ret; + char real_filename[PATH_MAX + 1]; + /* Make sure output generated so far are flushed */ + fflush(stdout); + switch (pid=fork()) { + case -1: + perror("fork"); + exit(1); + case 0: + memset(real_filename, 0, sizeof(real_filename)); + strncat(real_filename, kernsrctree, PATH_MAX); + strncat(real_filename, "/" KERNELDOCPATH KERNELDOC, + PATH_MAX - strlen(real_filename)); + execvp(real_filename, svec); + fprintf(stderr, "exec "); + perror(real_filename); + exit(1); + default: + waitpid(pid, &ret ,0); + } + if (WIFEXITED(ret)) + exitstatus |= WEXITSTATUS(ret); + else + exitstatus = 0xff; +} + +/* Types used to create list of all exported symbols in a number of files */ +struct symbols +{ + char *name; +}; + +struct symfile +{ + char *filename; + struct symbols *symbollist; + int symbolcnt; +}; + +struct symfile symfilelist[MAXFILES]; +int symfilecnt = 0; + +static void add_new_symbol(struct symfile *sym, char * symname) +{ + sym->symbollist = + realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *)); + sym->symbollist[sym->symbolcnt++].name = strdup(symname); +} + +/* Add a filename to the list */ +static struct symfile * add_new_file(char * filename) +{ + symfilelist[symfilecnt++].filename = strdup(filename); + return &symfilelist[symfilecnt - 1]; +} + +/* Check if file already are present in the list */ +static struct symfile * filename_exist(char * filename) +{ + int i; + for (i=0; i < symfilecnt; i++) + if (strcmp(symfilelist[i].filename, filename) == 0) + return &symfilelist[i]; + return NULL; +} + +/* + * List all files referenced within the template file. + * Files are separated by tabs. + */ +static void adddep(char * file) { printf("\t%s", file); } +static void adddep2(char * file, char * line) { line = line; adddep(file); } +static void noaction(char * line) { line = line; } +static void noaction2(char * file, char * line) { file = file; line = line; } + +/* Echo the line without further action */ +static void printline(char * line) { printf("%s", line); } + +/* + * Find all symbols in filename that are exported with EXPORT_SYMBOL & + * EXPORT_SYMBOL_GPL (& EXPORT_SYMBOL_GPL_FUTURE implicitly). + * All symbols located are stored in symfilelist. + */ +static void find_export_symbols(char * filename) +{ + FILE * fp; + struct symfile *sym; + char line[MAXLINESZ]; + if (filename_exist(filename) == NULL) { + char real_filename[PATH_MAX + 1]; + memset(real_filename, 0, sizeof(real_filename)); + strncat(real_filename, srctree, PATH_MAX); + strncat(real_filename, "/", PATH_MAX - strlen(real_filename)); + strncat(real_filename, filename, + PATH_MAX - strlen(real_filename)); + sym = add_new_file(filename); + fp = fopen(real_filename, "r"); + if (fp == NULL) { + fprintf(stderr, "docproc: "); + perror(real_filename); + exit(1); + } + while (fgets(line, MAXLINESZ, fp)) { + char *p; + char *e; + if (((p = strstr(line, "EXPORT_SYMBOL_GPL")) != NULL) || + ((p = strstr(line, "EXPORT_SYMBOL")) != NULL)) { + /* Skip EXPORT_SYMBOL{_GPL} */ + while (isalnum(*p) || *p == '_') + p++; + /* Remove parentheses & additional whitespace */ + while (isspace(*p)) + p++; + if (*p != '(') + continue; /* Syntax error? */ + else + p++; + while (isspace(*p)) + p++; + e = p; + while (isalnum(*e) || *e == '_') + e++; + *e = '\0'; + add_new_symbol(sym, p); + } + } + fclose(fp); + } +} + +/* + * Document all external or internal functions in a file. + * Call kernel-doc with following parameters: + * kernel-doc -docbook -nofunction function_name1 filename + * Function names are obtained from all the src files + * by find_export_symbols. + * intfunc uses -nofunction + * extfunc uses -function + */ +static void docfunctions(char * filename, char * type) +{ + int i,j; + int symcnt = 0; + int idx = 0; + char **vec; + + for (i=0; i <= symfilecnt; i++) + symcnt += symfilelist[i].symbolcnt; + vec = malloc((2 + 2 * symcnt + 3) * sizeof(char *)); + if (vec == NULL) { + perror("docproc: "); + exit(1); + } + vec[idx++] = KERNELDOC; + vec[idx++] = DOCBOOK; + vec[idx++] = NODOCSECTIONS; + for (i=0; i < symfilecnt; i++) { + struct symfile * sym = &symfilelist[i]; + for (j=0; j < sym->symbolcnt; j++) { + vec[idx++] = type; + consume_symbol(sym->symbollist[j].name); + vec[idx++] = sym->symbollist[j].name; + } + } + vec[idx++] = filename; + vec[idx] = NULL; + printf("\n", filename); + exec_kernel_doc(vec); + fflush(stdout); + free(vec); +} +static void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); } +static void extfunc(char * filename) { docfunctions(filename, FUNCTION); } + +/* + * Document specific function(s) in a file. + * Call kernel-doc with the following parameters: + * kernel-doc -docbook -function function1 [-function function2] + */ +static void singfunc(char * filename, char * line) +{ + char *vec[200]; /* Enough for specific functions */ + int i, idx = 0; + int startofsym = 1; + vec[idx++] = KERNELDOC; + vec[idx++] = DOCBOOK; + vec[idx++] = SHOWNOTFOUND; + + /* Split line up in individual parameters preceded by FUNCTION */ + for (i=0; line[i]; i++) { + if (isspace(line[i])) { + line[i] = '\0'; + startofsym = 1; + continue; + } + if (startofsym) { + startofsym = 0; + vec[idx++] = FUNCTION; + vec[idx++] = &line[i]; + } + } + for (i = 0; i < idx; i++) { + if (strcmp(vec[i], FUNCTION)) + continue; + consume_symbol(vec[i + 1]); + } + vec[idx++] = filename; + vec[idx] = NULL; + exec_kernel_doc(vec); +} + +/* + * Insert specific documentation section from a file. + * Call kernel-doc with the following parameters: + * kernel-doc -docbook -function "doc section" filename + */ +static void docsect(char *filename, char *line) +{ + /* kerneldoc -docbook -show-not-found -function "section" file NULL */ + char *vec[7]; + char *s; + + for (s = line; *s; s++) + if (*s == '\n') + *s = '\0'; + + if (asprintf(&s, "DOC: %s", line) < 0) { + perror("asprintf"); + exit(1); + } + consume_symbol(s); + free(s); + + vec[0] = KERNELDOC; + vec[1] = DOCBOOK; + vec[2] = SHOWNOTFOUND; + vec[3] = FUNCTION; + vec[4] = line; + vec[5] = filename; + vec[6] = NULL; + exec_kernel_doc(vec); +} + +static void find_all_symbols(char *filename) +{ + char *vec[4]; /* kerneldoc -list file NULL */ + pid_t pid; + int ret, i, count, start; + char real_filename[PATH_MAX + 1]; + int pipefd[2]; + char *data, *str; + size_t data_len = 0; + + vec[0] = KERNELDOC; + vec[1] = LIST; + vec[2] = filename; + vec[3] = NULL; + + if (pipe(pipefd)) { + perror("pipe"); + exit(1); + } + + switch (pid=fork()) { + case -1: + perror("fork"); + exit(1); + case 0: + close(pipefd[0]); + dup2(pipefd[1], 1); + memset(real_filename, 0, sizeof(real_filename)); + strncat(real_filename, kernsrctree, PATH_MAX); + strncat(real_filename, "/" KERNELDOCPATH KERNELDOC, + PATH_MAX - strlen(real_filename)); + execvp(real_filename, vec); + fprintf(stderr, "exec "); + perror(real_filename); + exit(1); + default: + close(pipefd[1]); + data = malloc(4096); + do { + while ((ret = read(pipefd[0], + data + data_len, + 4096)) > 0) { + data_len += ret; + data = realloc(data, data_len + 4096); + } + } while (ret == -EAGAIN); + if (ret != 0) { + perror("read"); + exit(1); + } + waitpid(pid, &ret ,0); + } + if (WIFEXITED(ret)) + exitstatus |= WEXITSTATUS(ret); + else + exitstatus = 0xff; + + count = 0; + /* poor man's strtok, but with counting */ + for (i = 0; i < data_len; i++) { + if (data[i] == '\n') { + count++; + data[i] = '\0'; + } + } + start = all_list_len; + all_list_len += count; + all_list = realloc(all_list, sizeof(char *) * all_list_len); + str = data; + for (i = 0; i < data_len && start != all_list_len; i++) { + if (data[i] == '\0') { + all_list[start] = str; + str = data + i + 1; + start++; + } + } +} + +/* + * Parse file, calling action specific functions for: + * 1) Lines containing !E + * 2) Lines containing !I + * 3) Lines containing !D + * 4) Lines containing !F + * 5) Lines containing !P + * 6) Lines containing !C + * 7) Default lines - lines not matching the above + */ +static void parse_file(FILE *infile) +{ + char line[MAXLINESZ]; + char * s; + while (fgets(line, MAXLINESZ, infile)) { + if (line[0] == '!') { + s = line + 2; + switch (line[1]) { + case 'E': + while (*s && !isspace(*s)) s++; + *s = '\0'; + externalfunctions(line+2); + break; + case 'I': + while (*s && !isspace(*s)) s++; + *s = '\0'; + internalfunctions(line+2); + break; + case 'D': + while (*s && !isspace(*s)) s++; + *s = '\0'; + symbolsonly(line+2); + break; + case 'F': + /* filename */ + while (*s && !isspace(*s)) s++; + *s++ = '\0'; + /* function names */ + while (isspace(*s)) + s++; + singlefunctions(line +2, s); + break; + case 'P': + /* filename */ + while (*s && !isspace(*s)) s++; + *s++ = '\0'; + /* DOC: section name */ + while (isspace(*s)) + s++; + docsection(line + 2, s); + break; + case 'C': + while (*s && !isspace(*s)) s++; + *s = '\0'; + if (findall) + findall(line+2); + break; + default: + defaultline(line); + } + } else { + defaultline(line); + } + } + fflush(stdout); +} + + +int main(int argc, char *argv[]) +{ + FILE * infile; + int i; + + srctree = getenv("SRCTREE"); + if (!srctree) + srctree = getcwd(NULL, 0); + kernsrctree = getenv("KBUILD_SRC"); + if (!kernsrctree || !*kernsrctree) + kernsrctree = srctree; + if (argc != 3) { + usage(); + exit(1); + } + /* Open file, exit on error */ + infile = fopen(argv[2], "r"); + if (infile == NULL) { + fprintf(stderr, "docproc: "); + perror(argv[2]); + exit(2); + } + + if (strcmp("doc", argv[1]) == 0) { + /* Need to do this in two passes. + * First pass is used to collect all symbols exported + * in the various files; + * Second pass generate the documentation. + * This is required because some functions are declared + * and exported in different files :-(( + */ + /* Collect symbols */ + defaultline = noaction; + internalfunctions = find_export_symbols; + externalfunctions = find_export_symbols; + symbolsonly = find_export_symbols; + singlefunctions = noaction2; + docsection = noaction2; + findall = find_all_symbols; + parse_file(infile); + + /* Rewind to start from beginning of file again */ + fseek(infile, 0, SEEK_SET); + defaultline = printline; + internalfunctions = intfunc; + externalfunctions = extfunc; + symbolsonly = printline; + singlefunctions = singfunc; + docsection = docsect; + findall = NULL; + + parse_file(infile); + + for (i = 0; i < all_list_len; i++) { + if (!all_list[i]) + continue; + fprintf(stderr, "Warning: didn't use docs for %s\n", + all_list[i]); + } + } else if (strcmp("depend", argv[1]) == 0) { + /* Create first part of dependency chain + * file.tmpl */ + printf("%s\t", argv[2]); + defaultline = noaction; + internalfunctions = adddep; + externalfunctions = adddep; + symbolsonly = adddep; + singlefunctions = adddep2; + docsection = adddep2; + findall = adddep; + parse_file(infile); + printf("\n"); + } else { + fprintf(stderr, "Unknown option: %s\n", argv[1]); + exit(1); + } + fclose(infile); + fflush(stdout); + return exitstatus; +} diff --git a/qemu/roms/u-boot/scripts/dtc-version.sh b/qemu/roms/u-boot/scripts/dtc-version.sh new file mode 100644 index 000000000..e8c94d390 --- /dev/null +++ b/qemu/roms/u-boot/scripts/dtc-version.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# +# dtc-version dtc-command +# +# Prints the dtc version of `dtc-command' in a canonical 4-digit form +# such as `0222' for binutils 2.22 +# + +dtc="$*" + +if [ ${#dtc} -eq 0 ]; then + echo "Error: No dtc command specified." + printf "Usage:\n\t$0 \n" + exit 1 +fi + +MAJOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 1) +MINOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 2) + +printf "%02d%02d\\n" $MAJOR $MINOR diff --git a/qemu/roms/u-boot/scripts/gcc-stack-usage.sh b/qemu/roms/u-boot/scripts/gcc-stack-usage.sh new file mode 100644 index 000000000..27ac92896 --- /dev/null +++ b/qemu/roms/u-boot/scripts/gcc-stack-usage.sh @@ -0,0 +1,18 @@ +#!/bin/sh +# Test for gcc '-fstack-usage' support +# Copyright (C) 2013, Masahiro Yamada +# +# SPDX-License-Identifier: GPL-2.0+ +# + +TMP="$$" + +cat </dev/null 2>&1 \ + && echo "y" +int main(void) +{ + return 0; +} +END + +rm -f $TMP $TMP.su diff --git a/qemu/roms/u-boot/scripts/gcc-version.sh b/qemu/roms/u-boot/scripts/gcc-version.sh new file mode 100644 index 000000000..debecb556 --- /dev/null +++ b/qemu/roms/u-boot/scripts/gcc-version.sh @@ -0,0 +1,32 @@ +#!/bin/sh +# +# gcc-version [-p] gcc-command +# +# Prints the gcc version of `gcc-command' in a canonical 4-digit form +# such as `0295' for gcc-2.95, `0303' for gcc-3.3, etc. +# +# With the -p option, prints the patchlevel as well, for example `029503' for +# gcc-2.95.3, `030301' for gcc-3.3.1, etc. +# + +if [ "$1" = "-p" ] ; then + with_patchlevel=1; + shift; +fi + +compiler="$*" + +if [ ${#compiler} -eq 0 ]; then + echo "Error: No compiler specified." + printf "Usage:\n\t$0 \n" + exit 1 +fi + +MAJOR=$(echo __GNUC__ | $compiler -E -xc - | tail -n 1) +MINOR=$(echo __GNUC_MINOR__ | $compiler -E -xc - | tail -n 1) +if [ "x$with_patchlevel" != "x" ] ; then + PATCHLEVEL=$(echo __GNUC_PATCHLEVEL__ | $compiler -E -xc - | tail -n 1) + printf "%02d%02d%02d\\n" $MAJOR $MINOR $PATCHLEVEL +else + printf "%02d%02d\\n" $MAJOR $MINOR +fi diff --git a/qemu/roms/u-boot/scripts/kernel-doc b/qemu/roms/u-boot/scripts/kernel-doc new file mode 100755 index 000000000..c881b8cb3 --- /dev/null +++ b/qemu/roms/u-boot/scripts/kernel-doc @@ -0,0 +1,2609 @@ +#!/usr/bin/perl -w + +use strict; + +## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ## +## Copyright (C) 2000, 1 Tim Waugh ## +## Copyright (C) 2001 Simon Huggins ## +## Copyright (C) 2005-2012 Randy Dunlap ## +## Copyright (C) 2012 Dan Luedtke ## +## ## +## #define enhancements by Armin Kuster ## +## Copyright (c) 2000 MontaVista Software, Inc. ## +## ## +## This software falls under the GNU General Public License. ## +## Please read the COPYING file for more information ## + +# 18/01/2001 - Cleanups +# Functions prototyped as foo(void) same as foo() +# Stop eval'ing where we don't need to. +# -- huggie@earth.li + +# 27/06/2001 - Allowed whitespace after initial "/**" and +# allowed comments before function declarations. +# -- Christian Kreibich + +# Still to do: +# - add perldoc documentation +# - Look more closely at some of the scarier bits :) + +# 26/05/2001 - Support for separate source and object trees. +# Return error code. +# Keith Owens + +# 23/09/2001 - Added support for typedefs, structs, enums and unions +# Support for Context section; can be terminated using empty line +# Small fixes (like spaces vs. \s in regex) +# -- Tim Jansen + +# 25/07/2012 - Added support for HTML5 +# -- Dan Luedtke + +# +# This will read a 'c' file and scan for embedded comments in the +# style of gnome comments (+minor extensions - see below). +# + +# Note: This only supports 'c'. + +# usage: +# kernel-doc [ -docbook | -html | -html5 | -text | -man | -list ] +# [ -no-doc-sections ] +# [ -function funcname [ -function funcname ...] ] +# c file(s)s > outputfile +# or +# [ -nofunction funcname [ -function funcname ...] ] +# c file(s)s > outputfile +# +# Set output format using one of -docbook -html -html5 -text or -man. +# Default is man. +# The -list format is for internal use by docproc. +# +# -no-doc-sections +# Do not output DOC: sections +# +# -function funcname +# If set, then only generate documentation for the given function(s) or +# DOC: section titles. All other functions and DOC: sections are ignored. +# +# -nofunction funcname +# If set, then only generate documentation for the other function(s)/DOC: +# sections. Cannot be used together with -function (yes, that's a bug -- +# perl hackers can fix it 8)) +# +# c files - list of 'c' files to process +# +# All output goes to stdout, with errors to stderr. + +# +# format of comments. +# In the following table, (...)? signifies optional structure. +# (...)* signifies 0 or more structure elements +# /** +# * function_name(:)? (- short description)? +# (* @parameterx: (description of parameter x)?)* +# (* a blank line)? +# * (Description:)? (Description of function)? +# * (section header: (section description)? )* +# (*)?*/ +# +# So .. the trivial example would be: +# +# /** +# * my_function +# */ +# +# If the Description: header tag is omitted, then there must be a blank line +# after the last parameter specification. +# e.g. +# /** +# * my_function - does my stuff +# * @my_arg: its mine damnit +# * +# * Does my stuff explained. +# */ +# +# or, could also use: +# /** +# * my_function - does my stuff +# * @my_arg: its mine damnit +# * Description: Does my stuff explained. +# */ +# etc. +# +# Besides functions you can also write documentation for structs, unions, +# enums and typedefs. Instead of the function name you must write the name +# of the declaration; the struct/union/enum/typedef must always precede +# the name. Nesting of declarations is not supported. +# Use the argument mechanism to document members or constants. +# e.g. +# /** +# * struct my_struct - short description +# * @a: first member +# * @b: second member +# * +# * Longer description +# */ +# struct my_struct { +# int a; +# int b; +# /* private: */ +# int c; +# }; +# +# All descriptions can be multiline, except the short function description. +# +# You can also add additional sections. When documenting kernel functions you +# should document the "Context:" of the function, e.g. whether the functions +# can be called form interrupts. Unlike other sections you can end it with an +# empty line. +# A non-void function should have a "Return:" section describing the return +# value(s). +# Example-sections should contain the string EXAMPLE so that they are marked +# appropriately in DocBook. +# +# Example: +# /** +# * user_function - function that can only be called in user context +# * @a: some argument +# * Context: !in_interrupt() +# * +# * Some description +# * Example: +# * user_function(22); +# */ +# ... +# +# +# All descriptive text is further processed, scanning for the following special +# patterns, which are highlighted appropriately. +# +# 'funcname()' - function +# '$ENVVAR' - environmental variable +# '&struct_name' - name of a structure (up to two words including 'struct') +# '@parameter' - name of a parameter +# '%CONST' - name of a constant. + +## init lots of data + +my $errors = 0; +my $warnings = 0; +my $anon_struct_union = 0; + +# match expressions used to find embedded type information +my $type_constant = '\%([-_\w]+)'; +my $type_func = '(\w+)\(\)'; +my $type_param = '\@(\w+)'; +my $type_struct = '\&((struct\s*)*[_\w]+)'; +my $type_struct_xml = '\\&((struct\s*)*[_\w]+)'; +my $type_env = '(\$\w+)'; + +# Output conversion substitutions. +# One for each output format + +# these work fairly well +my %highlights_html = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct_xml, "\$1", + $type_env, "\$1", + $type_param, "\$1" ); +my $local_lt = "\\\\\\\\lt:"; +my $local_gt = "\\\\\\\\gt:"; +my $blankline_html = $local_lt . "p" . $local_gt; # was "

" + +# html version 5 +my %highlights_html5 = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct_xml, "\$1", + $type_env, "\$1", + $type_param, "\$1" ); +my $blankline_html5 = $local_lt . "br /" . $local_gt; + +# XML, docbook format +my %highlights_xml = ( "([^=])\\\"([^\\\"<]+)\\\"", "\$1\$2", + $type_constant, "\$1", + $type_func, "\$1", + $type_struct_xml, "\$1", + $type_env, "\$1", + $type_param, "\$1" ); +my $blankline_xml = $local_lt . "/para" . $local_gt . $local_lt . "para" . $local_gt . "\n"; + +# gnome, docbook format +my %highlights_gnome = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct, "\$1", + $type_env, "\$1", + $type_param, "\$1" ); +my $blankline_gnome = "\n"; + +# these are pretty rough +my %highlights_man = ( $type_constant, "\$1", + $type_func, "\\\\fB\$1\\\\fP", + $type_struct, "\\\\fI\$1\\\\fP", + $type_param, "\\\\fI\$1\\\\fP" ); +my $blankline_man = ""; + +# text-mode +my %highlights_text = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct, "\$1", + $type_param, "\$1" ); +my $blankline_text = ""; + +# list mode +my %highlights_list = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct, "\$1", + $type_param, "\$1" ); +my $blankline_list = ""; + +# read arguments +if ($#ARGV == -1) { + usage(); +} + +my $kernelversion; +my $dohighlight = ""; + +my $verbose = 0; +my $output_mode = "man"; +my $output_preformatted = 0; +my $no_doc_sections = 0; +my %highlights = %highlights_man; +my $blankline = $blankline_man; +my $modulename = "Bootloader API"; +my $function_only = 0; +my $man_date = ('January', 'February', 'March', 'April', 'May', 'June', + 'July', 'August', 'September', 'October', + 'November', 'December')[(localtime)[4]] . + " " . ((localtime)[5]+1900); +my $show_not_found = 0; + +# Essentially these are globals. +# They probably want to be tidied up, made more localised or something. +# CAVEAT EMPTOR! Some of the others I localised may not want to be, which +# could cause "use of undefined value" or other bugs. +my ($function, %function_table, %parametertypes, $declaration_purpose); +my ($type, $declaration_name, $return_type); +my ($newsection, $newcontents, $prototype, $brcount, %source_map); + +if (defined($ENV{'KBUILD_VERBOSE'})) { + $verbose = "$ENV{'KBUILD_VERBOSE'}"; +} + +# Generated docbook code is inserted in a template at a point where +# docbook v3.1 requires a non-zero sequence of RefEntry's; see: +# http://www.oasis-open.org/docbook/documentation/reference/html/refentry.html +# We keep track of number of generated entries and generate a dummy +# if needs be to ensure the expanded template can be postprocessed +# into html. +my $section_counter = 0; + +my $lineprefix=""; + +# states +# 0 - normal code +# 1 - looking for function name +# 2 - scanning field start. +# 3 - scanning prototype. +# 4 - documentation block +my $state; +my $in_doc_sect; + +#declaration types: can be +# 'function', 'struct', 'union', 'enum', 'typedef' +my $decl_type; + +my $doc_special = "\@\%\$\&"; + +my $doc_start = '^/\*\*\s*$'; # Allow whitespace at end of comment start. +my $doc_end = '\*/'; +my $doc_com = '\s*\*\s*'; +my $doc_com_body = '\s*\* ?'; +my $doc_decl = $doc_com . '(\w+)'; +my $doc_sect = $doc_com . '([' . $doc_special . ']?[\w\s]+):(.*)'; +my $doc_content = $doc_com_body . '(.*)'; +my $doc_block = $doc_com . 'DOC:\s*(.*)?'; + +my %constants; +my %parameterdescs; +my @parameterlist; +my %sections; +my @sectionlist; +my $sectcheck; +my $struct_actual; + +my $contents = ""; +my $section_default = "Description"; # default section +my $section_intro = "Introduction"; +my $section = $section_default; +my $section_context = "Context"; +my $section_return = "Return"; + +my $undescribed = "-- undescribed --"; + +reset_state(); + +while ($ARGV[0] =~ m/^-(.*)/) { + my $cmd = shift @ARGV; + if ($cmd eq "-html") { + $output_mode = "html"; + %highlights = %highlights_html; + $blankline = $blankline_html; + } elsif ($cmd eq "-html5") { + $output_mode = "html5"; + %highlights = %highlights_html5; + $blankline = $blankline_html5; + } elsif ($cmd eq "-man") { + $output_mode = "man"; + %highlights = %highlights_man; + $blankline = $blankline_man; + } elsif ($cmd eq "-text") { + $output_mode = "text"; + %highlights = %highlights_text; + $blankline = $blankline_text; + } elsif ($cmd eq "-docbook") { + $output_mode = "xml"; + %highlights = %highlights_xml; + $blankline = $blankline_xml; + } elsif ($cmd eq "-list") { + $output_mode = "list"; + %highlights = %highlights_list; + $blankline = $blankline_list; + } elsif ($cmd eq "-gnome") { + $output_mode = "gnome"; + %highlights = %highlights_gnome; + $blankline = $blankline_gnome; + } elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document + $modulename = shift @ARGV; + } elsif ($cmd eq "-function") { # to only output specific functions + $function_only = 1; + $function = shift @ARGV; + $function_table{$function} = 1; + } elsif ($cmd eq "-nofunction") { # to only output specific functions + $function_only = 2; + $function = shift @ARGV; + $function_table{$function} = 1; + } elsif ($cmd eq "-v") { + $verbose = 1; + } elsif (($cmd eq "-h") || ($cmd eq "--help")) { + usage(); + } elsif ($cmd eq '-no-doc-sections') { + $no_doc_sections = 1; + } elsif ($cmd eq '-show-not-found') { + $show_not_found = 1; + } +} + +# continue execution near EOF; + +sub usage { + print "Usage: $0 [ -docbook | -html | -html5 | -text | -man | -list ]\n"; + print " [ -no-doc-sections ]\n"; + print " [ -function funcname [ -function funcname ...] ]\n"; + print " [ -nofunction funcname [ -nofunction funcname ...] ]\n"; + print " [ -v ]\n"; + print " c source file(s) > outputfile\n"; + print " -v : verbose output, more warnings & other info listed\n"; + exit 1; +} + +# get kernel version from env +sub get_kernel_version() { + my $version = 'unknown kernel version'; + + if (defined($ENV{'UBOOTVERSION'})) { + $version = $ENV{'UBOOTVERSION'}; + } + return $version; +} + +## +# dumps section contents to arrays/hashes intended for that purpose. +# +sub dump_section { + my $file = shift; + my $name = shift; + my $contents = join "\n", @_; + + if ($name =~ m/$type_constant/) { + $name = $1; +# print STDERR "constant section '$1' = '$contents'\n"; + $constants{$name} = $contents; + } elsif ($name =~ m/$type_param/) { +# print STDERR "parameter def '$1' = '$contents'\n"; + $name = $1; + $parameterdescs{$name} = $contents; + $sectcheck = $sectcheck . $name . " "; + } elsif ($name eq "@\.\.\.") { +# print STDERR "parameter def '...' = '$contents'\n"; + $name = "..."; + $parameterdescs{$name} = $contents; + $sectcheck = $sectcheck . $name . " "; + } else { +# print STDERR "other section '$name' = '$contents'\n"; + if (defined($sections{$name}) && ($sections{$name} ne "")) { + print STDERR "Error(${file}:$.): duplicate section name '$name'\n"; + ++$errors; + } + $sections{$name} = $contents; + push @sectionlist, $name; + } +} + +## +# dump DOC: section after checking that it should go out +# +sub dump_doc_section { + my $file = shift; + my $name = shift; + my $contents = join "\n", @_; + + if ($no_doc_sections) { + return; + } + + if (($function_only == 0) || + ( $function_only == 1 && defined($function_table{$name})) || + ( $function_only == 2 && !defined($function_table{$name}))) + { + dump_section($file, $name, $contents); + output_blockhead({'sectionlist' => \@sectionlist, + 'sections' => \%sections, + 'module' => $modulename, + 'content-only' => ($function_only != 0), }); + } +} + +## +# output function +# +# parameterdescs, a hash. +# function => "function name" +# parameterlist => @list of parameters +# parameterdescs => %parameter descriptions +# sectionlist => @list of sections +# sections => %section descriptions +# + +sub output_highlight { + my $contents = join "\n",@_; + my $line; + +# DEBUG +# if (!defined $contents) { +# use Carp; +# confess "output_highlight got called with no args?\n"; +# } + + if ($output_mode eq "html" || $output_mode eq "html5" || + $output_mode eq "xml") { + $contents = local_unescape($contents); + # convert data read & converted thru xml_escape() into &xyz; format: + $contents =~ s/\\\\\\/\&/g; + } +# print STDERR "contents b4:$contents\n"; + eval $dohighlight; + die $@ if $@; +# print STDERR "contents af:$contents\n"; + +# strip whitespaces when generating html5 + if ($output_mode eq "html5") { + $contents =~ s/^\s+//; + $contents =~ s/\s+$//; + } + foreach $line (split "\n", $contents) { + if (! $output_preformatted) { + $line =~ s/^\s*//; + } + if ($line eq ""){ + if (! $output_preformatted) { + print $lineprefix, local_unescape($blankline); + } + } else { + $line =~ s/\\\\\\/\&/g; + if ($output_mode eq "man" && substr($line, 0, 1) eq ".") { + print "\\&$line"; + } else { + print $lineprefix, $line; + } + } + print "\n"; + } +} + +# output sections in html +sub output_section_html(%) { + my %args = %{$_[0]}; + my $section; + + foreach $section (@{$args{'sectionlist'}}) { + print "

$section

\n"; + print "
\n"; + output_highlight($args{'sections'}{$section}); + print "
\n"; + } +} + +# output enum in html +sub output_enum_html(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + print "

enum " . $args{'enum'} . "

\n"; + + print "enum " . $args{'enum'} . " {
\n"; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + print " " . $parameter . ""; + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ",\n"; + } + print "
"; + } + print "};
\n"; + + print "

Constants

\n"; + print "
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + print "
" . $parameter . "\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter}); + } + print "
\n"; + output_section_html(@_); + print "
\n"; +} + +# output typedef in html +sub output_typedef_html(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + print "

typedef " . $args{'typedef'} . "

\n"; + + print "typedef " . $args{'typedef'} . "\n"; + output_section_html(@_); + print "
\n"; +} + +# output struct in html +sub output_struct_html(%) { + my %args = %{$_[0]}; + my ($parameter); + + print "

" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "

\n"; + print "" . $args{'type'} . " " . $args{'struct'} . " {
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + if ($parameter =~ /^#/) { + print "$parameter
\n"; + next; + } + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print "    $1$parameter) ($2);
\n"; + } elsif ($type =~ m/^(.*?)\s*(:.*)/) { + # bitfield + print "    $1 $parameter$2;
\n"; + } else { + print "    $type $parameter;
\n"; + } + } + print "};
\n"; + + print "

Members

\n"; + print "
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + ($parameter =~ /^#/) && next; + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print "
" . $parameter . "\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + } + print "
\n"; + output_section_html(@_); + print "
\n"; +} + +# output function in html +sub output_function_html(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + print "

" . $args{'function'} . " - " . $args{'purpose'} . "

\n"; + print "" . $args{'functiontype'} . "\n"; + print "" . $args{'function'} . "\n"; + print "("; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print "$1$parameter) ($2)"; + } else { + print "" . $type . " " . $parameter . ""; + } + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ",\n"; + } + } + print ")\n"; + + print "

Arguments

\n"; + print "
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print "
" . $parameter . "\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + } + print "
\n"; + output_section_html(@_); + print "
\n"; +} + +# output DOC: block header in html +sub output_blockhead_html(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + foreach $section (@{$args{'sectionlist'}}) { + print "

$section

\n"; + print "
    \n"; + output_highlight($args{'sections'}{$section}); + print "
\n"; + } + print "
\n"; +} + +# output sections in html5 +sub output_section_html5(%) { + my %args = %{$_[0]}; + my $section; + + foreach $section (@{$args{'sectionlist'}}) { + print "
\n"; + print "

$section

\n"; + print "

\n"; + output_highlight($args{'sections'}{$section}); + print "

\n"; + print "
\n"; + } +} + +# output enum in html5 +sub output_enum_html5(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + my $html5id; + + $html5id = $args{'enum'}; + $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; + print "
"; + print "

enum " . $args{'enum'} . "

\n"; + print "
    \n"; + print "
  1. "; + print "enum "; + print "" . $args{'enum'} . " {"; + print "
    2. \n"; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + print "
  2. "; + print "" . $parameter . ""; + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ","; + } + print "
    3. \n"; + } + print "
  3. };
    4. \n"; + print "
\n"; + + print "
\n"; + print "

Constants

\n"; + print "
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + print "
" . $parameter . "
\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter}); + print "
\n"; + } + print "
\n"; + print "
\n"; + output_section_html5(@_); + print "
\n"; +} + +# output typedef in html5 +sub output_typedef_html5(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + my $html5id; + + $html5id = $args{'typedef'}; + $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; + print "
\n"; + print "

typedef " . $args{'typedef'} . "

\n"; + + print "
    \n"; + print "
  1. "; + print "typedef "; + print "" . $args{'typedef'} . ""; + print "
    2. \n"; + print "
\n"; + output_section_html5(@_); + print "
\n"; +} + +# output struct in html5 +sub output_struct_html5(%) { + my %args = %{$_[0]}; + my ($parameter); + my $html5id; + + $html5id = $args{'struct'}; + $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; + print "
\n"; + print "
\n"; + print "

" . $args{'type'} . " " . $args{'struct'} . "

"; + print "

". $args{'purpose'} . "

\n"; + print "
\n"; + print "
    \n"; + print "
  1. "; + print "" . $args{'type'} . " "; + print "" . $args{'struct'} . " {"; + print "
    2. \n"; + foreach $parameter (@{$args{'parameterlist'}}) { + print "
  2. "; + if ($parameter =~ /^#/) { + print "" . $parameter ."\n"; + print "
    3. \n"; + next; + } + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print "$1 "; + print "$parameter"; + print ") "; + print "($2);"; + } elsif ($type =~ m/^(.*?)\s*(:.*)/) { + # bitfield + print "$1 "; + print "$parameter"; + print "$2;"; + } else { + print "$type "; + print "$parameter;"; + } + print "\n"; + } + print "
  3. };
    4. \n"; + print "
\n"; + + print "
\n"; + print "

Members

\n"; + print "
\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + ($parameter =~ /^#/) && next; + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print "
" . $parameter . "
\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print "
\n"; + } + print "
\n"; + print "
\n"; + output_section_html5(@_); + print "
\n"; +} + +# output function in html5 +sub output_function_html5(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + my $html5id; + + $html5id = $args{'function'}; + $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; + print "
\n"; + print "
\n"; + print "

" . $args{'function'} . "

"; + print "

" . $args{'purpose'} . "

\n"; + print "
\n"; + print "
    \n"; + print "
  1. "; + print "" . $args{'functiontype'} . " "; + print "" . $args{'function'} . " ("; + print "
    2. "; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + print "
  2. "; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print "$1 "; + print "$parameter"; + print ") "; + print "($2)"; + } else { + print "$type "; + print "$parameter"; + } + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ","; + } + print "
    3. \n"; + } + print "
  3. )
    4. \n"; + print "
\n"; + + print "
\n"; + print "

Arguments

\n"; + print "

\n"; + print "

\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print "
" . $parameter . "
\n"; + print "
"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print "
\n"; + } + print "
\n"; + print "
\n"; + output_section_html5(@_); + print "
\n"; +} + +# output DOC: block header in html5 +sub output_blockhead_html5(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + my $html5id; + + foreach $section (@{$args{'sectionlist'}}) { + $html5id = $section; + $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; + print "
\n"; + print "

$section

\n"; + print "

\n"; + output_highlight($args{'sections'}{$section}); + print "

\n"; + } + print "
\n"; +} + +sub output_section_xml(%) { + my %args = %{$_[0]}; + my $section; + # print out each section + $lineprefix=" "; + foreach $section (@{$args{'sectionlist'}}) { + print "\n"; + print "$section\n"; + if ($section =~ m/EXAMPLE/i) { + print "\n"; + $output_preformatted = 1; + } else { + print "\n"; + } + output_highlight($args{'sections'}{$section}); + $output_preformatted = 0; + if ($section =~ m/EXAMPLE/i) { + print "\n"; + } else { + print "\n"; + } + print "\n"; + } +} + +# output function in XML DocBook +sub output_function_xml(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + my $id; + + $id = "API-" . $args{'function'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + print "\n"; + print "\n"; + print " U-BOOT\n"; + print " Bootloader Hackers Manual\n"; + print " $man_date\n"; + print "\n"; + print "\n"; + print " " . $args{'function'} . "\n"; + print " 9\n"; + print " " . $kernelversion . "\n"; + print "\n"; + print "\n"; + print " " . $args{'function'} . "\n"; + print " \n"; + print " "; + output_highlight ($args{'purpose'}); + print " \n"; + print "\n"; + + print "\n"; + print " Synopsis\n"; + print " \n"; + print " " . $args{'functiontype'} . " "; + print "" . $args{'function'} . " \n"; + + $count = 0; + if ($#{$args{'parameterlist'}} >= 0) { + foreach $parameter (@{$args{'parameterlist'}}) { + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print " $1$parameter)\n"; + print " $2\n"; + } else { + print " " . $type; + print " $parameter\n"; + } + } + } else { + print " \n"; + } + print " \n"; + print "\n"; + + # print parameters + print "\n Arguments\n"; + if ($#{$args{'parameterlist'}} >= 0) { + print " \n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print " \n $parameter\n"; + print " \n \n"; + $lineprefix=" "; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print " \n \n \n"; + } + print " \n"; + } else { + print " \n None\n \n"; + } + print "\n"; + + output_section_xml(@_); + print "\n\n"; +} + +# output struct in XML DocBook +sub output_struct_xml(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $id; + + $id = "API-struct-" . $args{'struct'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + print "\n"; + print "\n"; + print " U-BOOT\n"; + print " Bootloader Hackers Manual\n"; + print " $man_date\n"; + print "\n"; + print "\n"; + print " " . $args{'type'} . " " . $args{'struct'} . "\n"; + print " 9\n"; + print " " . $kernelversion . "\n"; + print "\n"; + print "\n"; + print " " . $args{'type'} . " " . $args{'struct'} . "\n"; + print " \n"; + print " "; + output_highlight ($args{'purpose'}); + print " \n"; + print "\n"; + + print "\n"; + print " Synopsis\n"; + print " \n"; + print $args{'type'} . " " . $args{'struct'} . " {\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + if ($parameter =~ /^#/) { + my $prm = $parameter; + # convert data read & converted thru xml_escape() into &xyz; format: + # This allows us to have #define macros interspersed in a struct. + $prm =~ s/\\\\\\/\&/g; + print "$prm\n"; + next; + } + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + defined($args{'parameterdescs'}{$parameter_name}) || next; + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print " $1 $parameter) ($2);\n"; + } elsif ($type =~ m/^(.*?)\s*(:.*)/) { + # bitfield + print " $1 $parameter$2;\n"; + } else { + print " " . $type . " " . $parameter . ";\n"; + } + } + print "};"; + print " \n"; + print "\n"; + + print " \n"; + print " Members\n"; + + if ($#{$args{'parameterlist'}} >= 0) { + print " \n"; + foreach $parameter (@{$args{'parameterlist'}}) { + ($parameter =~ /^#/) && next; + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + defined($args{'parameterdescs'}{$parameter_name}) || next; + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print " "; + print " $parameter\n"; + print " \n"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print " \n"; + print " \n"; + } + print " \n"; + } else { + print " \n None\n \n"; + } + print " \n"; + + output_section_xml(@_); + + print "\n\n"; +} + +# output enum in XML DocBook +sub output_enum_xml(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + my $id; + + $id = "API-enum-" . $args{'enum'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + print "\n"; + print "\n"; + print " U-BOOT\n"; + print " Bootloader Hackers Manual\n"; + print " $man_date\n"; + print "\n"; + print "\n"; + print " enum " . $args{'enum'} . "\n"; + print " 9\n"; + print " " . $kernelversion . "\n"; + print "\n"; + print "\n"; + print " enum " . $args{'enum'} . "\n"; + print " \n"; + print " "; + output_highlight ($args{'purpose'}); + print " \n"; + print "\n"; + + print "\n"; + print " Synopsis\n"; + print " \n"; + print "enum " . $args{'enum'} . " {\n"; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + print " $parameter"; + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ","; + } + print "\n"; + } + print "};"; + print " \n"; + print "\n"; + + print "\n"; + print " Constants\n"; + print " \n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print " "; + print " $parameter\n"; + print " \n"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print " \n"; + print " \n"; + } + print " \n"; + print "\n"; + + output_section_xml(@_); + + print "\n\n"; +} + +# output typedef in XML DocBook +sub output_typedef_xml(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $id; + + $id = "API-typedef-" . $args{'typedef'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + print "\n"; + print "\n"; + print " U-BOOT\n"; + print " Bootloader Hackers Manual\n"; + print " $man_date\n"; + print "\n"; + print "\n"; + print " typedef " . $args{'typedef'} . "\n"; + print " 9\n"; + print "\n"; + print "\n"; + print " typedef " . $args{'typedef'} . "\n"; + print " \n"; + print " "; + output_highlight ($args{'purpose'}); + print " \n"; + print "\n"; + + print "\n"; + print " Synopsis\n"; + print " typedef " . $args{'typedef'} . ";\n"; + print "\n"; + + output_section_xml(@_); + + print "\n\n"; +} + +# output in XML DocBook +sub output_blockhead_xml(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + my $id = $args{'module'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + # print out each section + $lineprefix=" "; + foreach $section (@{$args{'sectionlist'}}) { + if (!$args{'content-only'}) { + print "\n $section\n"; + } + if ($section =~ m/EXAMPLE/i) { + print "\n"; + $output_preformatted = 1; + } else { + print "\n"; + } + output_highlight($args{'sections'}{$section}); + $output_preformatted = 0; + if ($section =~ m/EXAMPLE/i) { + print "\n"; + } else { + print ""; + } + if (!$args{'content-only'}) { + print "\n\n"; + } + } + + print "\n\n"; +} + +# output in XML DocBook +sub output_function_gnome { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + my $id; + + $id = $args{'module'} . "-" . $args{'function'}; + $id =~ s/[^A-Za-z0-9]/-/g; + + print "\n"; + print " " . $args{'function'} . "\n"; + + print " \n"; + print " " . $args{'functiontype'} . " "; + print "" . $args{'function'} . " "; + print "\n"; + + $count = 0; + if ($#{$args{'parameterlist'}} >= 0) { + foreach $parameter (@{$args{'parameterlist'}}) { + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print " $1 $parameter)\n"; + print " $2\n"; + } else { + print " " . $type; + print " $parameter\n"; + } + } + } else { + print " \n"; + } + print " \n"; + if ($#{$args{'parameterlist'}} >= 0) { + print " \n"; + print "\n"; + print "\n"; + print "\n"; + print "\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print " $parameter\n"; + print " \n"; + $lineprefix=" "; + output_highlight($args{'parameterdescs'}{$parameter_name}); + print " \n"; + } + print " \n"; + } else { + print " \n None\n \n"; + } + + # print out each section + $lineprefix=" "; + foreach $section (@{$args{'sectionlist'}}) { + print "\n $section\n"; + if ($section =~ m/EXAMPLE/i) { + print "\n"; + $output_preformatted = 1; + } else { + } + print "\n"; + output_highlight($args{'sections'}{$section}); + $output_preformatted = 0; + print "\n"; + if ($section =~ m/EXAMPLE/i) { + print "\n"; + } else { + } + print " \n"; + } + + print "\n\n"; +} + +## +# output function in man +sub output_function_man(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + print ".TH \"$args{'function'}\" 9 \"$args{'function'}\" \"$man_date\" \"Bootloader Hacker's Manual\" U-BOOT\n"; + + print ".SH NAME\n"; + print $args{'function'} . " \\- " . $args{'purpose'} . "\n"; + + print ".SH SYNOPSIS\n"; + if ($args{'functiontype'} ne "") { + print ".B \"" . $args{'functiontype'} . "\" " . $args{'function'} . "\n"; + } else { + print ".B \"" . $args{'function'} . "\n"; + } + $count = 0; + my $parenth = "("; + my $post = ","; + foreach my $parameter (@{$args{'parameterlist'}}) { + if ($count == $#{$args{'parameterlist'}}) { + $post = ");"; + } + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print ".BI \"" . $parenth . $1 . "\" " . $parameter . " \") (" . $2 . ")" . $post . "\"\n"; + } else { + $type =~ s/([^\*])$/$1 /; + print ".BI \"" . $parenth . $type . "\" " . $parameter . " \"" . $post . "\"\n"; + } + $count++; + $parenth = ""; + } + + print ".SH ARGUMENTS\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print ".IP \"" . $parameter . "\" 12\n"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + } + foreach $section (@{$args{'sectionlist'}}) { + print ".SH \"", uc $section, "\"\n"; + output_highlight($args{'sections'}{$section}); + } +} + +## +# output enum in man +sub output_enum_man(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + print ".TH \"$args{'module'}\" 9 \"enum $args{'enum'}\" \"$man_date\" \"API Manual\" U-BOOT\n"; + + print ".SH NAME\n"; + print "enum " . $args{'enum'} . " \\- " . $args{'purpose'} . "\n"; + + print ".SH SYNOPSIS\n"; + print "enum " . $args{'enum'} . " {\n"; + $count = 0; + foreach my $parameter (@{$args{'parameterlist'}}) { + print ".br\n.BI \" $parameter\"\n"; + if ($count == $#{$args{'parameterlist'}}) { + print "\n};\n"; + last; + } + else { + print ", \n.br\n"; + } + $count++; + } + + print ".SH Constants\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print ".IP \"" . $parameter . "\" 12\n"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + } + foreach $section (@{$args{'sectionlist'}}) { + print ".SH \"$section\"\n"; + output_highlight($args{'sections'}{$section}); + } +} + +## +# output struct in man +sub output_struct_man(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + + print ".TH \"$args{'module'}\" 9 \"" . $args{'type'} . " " . $args{'struct'} . "\" \"$man_date\" \"API Manual\" U-BOOT\n"; + + print ".SH NAME\n"; + print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n"; + + print ".SH SYNOPSIS\n"; + print $args{'type'} . " " . $args{'struct'} . " {\n.br\n"; + + foreach my $parameter (@{$args{'parameterlist'}}) { + if ($parameter =~ /^#/) { + print ".BI \"$parameter\"\n.br\n"; + next; + } + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print ".BI \" " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n"; + } elsif ($type =~ m/^(.*?)\s*(:.*)/) { + # bitfield + print ".BI \" " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n"; + } else { + $type =~ s/([^\*])$/$1 /; + print ".BI \" " . $type . "\" " . $parameter . " \"" . "\"\n;\n"; + } + print "\n.br\n"; + } + print "};\n.br\n"; + + print ".SH Members\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + ($parameter =~ /^#/) && next; + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print ".IP \"" . $parameter . "\" 12\n"; + output_highlight($args{'parameterdescs'}{$parameter_name}); + } + foreach $section (@{$args{'sectionlist'}}) { + print ".SH \"$section\"\n"; + output_highlight($args{'sections'}{$section}); + } +} + +## +# output typedef in man +sub output_typedef_man(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + + print ".TH \"$args{'module'}\" 9 \"$args{'typedef'}\" \"$man_date\" \"API Manual\" U-BOOT\n"; + + print ".SH NAME\n"; + print "typedef " . $args{'typedef'} . " \\- " . $args{'purpose'} . "\n"; + + foreach $section (@{$args{'sectionlist'}}) { + print ".SH \"$section\"\n"; + output_highlight($args{'sections'}{$section}); + } +} + +sub output_blockhead_man(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $count; + + print ".TH \"$args{'module'}\" 9 \"$args{'module'}\" \"$man_date\" \"API Manual\" U-BOOT\n"; + + foreach $section (@{$args{'sectionlist'}}) { + print ".SH \"$section\"\n"; + output_highlight($args{'sections'}{$section}); + } +} + +## +# output in text +sub output_function_text(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + my $start; + + print "Name:\n\n"; + print $args{'function'} . " - " . $args{'purpose'} . "\n"; + + print "\nSynopsis:\n\n"; + if ($args{'functiontype'} ne "") { + $start = $args{'functiontype'} . " " . $args{'function'} . " ("; + } else { + $start = $args{'function'} . " ("; + } + print $start; + + my $count = 0; + foreach my $parameter (@{$args{'parameterlist'}}) { + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print $1 . $parameter . ") (" . $2; + } else { + print $type . " " . $parameter; + } + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ",\n"; + print " " x length($start); + } else { + print ");\n\n"; + } + } + + print "Arguments:\n\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n"; + } + output_section_text(@_); +} + +#output sections in text +sub output_section_text(%) { + my %args = %{$_[0]}; + my $section; + + print "\n"; + foreach $section (@{$args{'sectionlist'}}) { + print "$section:\n\n"; + output_highlight($args{'sections'}{$section}); + } + print "\n\n"; +} + +# output enum in text +sub output_enum_text(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + print "Enum:\n\n"; + + print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n"; + print "enum " . $args{'enum'} . " {\n"; + $count = 0; + foreach $parameter (@{$args{'parameterlist'}}) { + print "\t$parameter"; + if ($count != $#{$args{'parameterlist'}}) { + $count++; + print ","; + } + print "\n"; + } + print "};\n\n"; + + print "Constants:\n\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + print "$parameter\n\t"; + print $args{'parameterdescs'}{$parameter} . "\n"; + } + + output_section_text(@_); +} + +# output typedef in text +sub output_typedef_text(%) { + my %args = %{$_[0]}; + my ($parameter); + my $count; + print "Typedef:\n\n"; + + print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n"; + output_section_text(@_); +} + +# output struct as text +sub output_struct_text(%) { + my %args = %{$_[0]}; + my ($parameter); + + print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n"; + print $args{'type'} . " " . $args{'struct'} . " {\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + if ($parameter =~ /^#/) { + print "$parameter\n"; + next; + } + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + $type = $args{'parametertypes'}{$parameter}; + if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { + # pointer-to-function + print "\t$1 $parameter) ($2);\n"; + } elsif ($type =~ m/^(.*?)\s*(:.*)/) { + # bitfield + print "\t$1 $parameter$2;\n"; + } else { + print "\t" . $type . " " . $parameter . ";\n"; + } + } + print "};\n\n"; + + print "Members:\n\n"; + foreach $parameter (@{$args{'parameterlist'}}) { + ($parameter =~ /^#/) && next; + + my $parameter_name = $parameter; + $parameter_name =~ s/\[.*//; + + ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; + print "$parameter\n\t"; + print $args{'parameterdescs'}{$parameter_name} . "\n"; + } + print "\n"; + output_section_text(@_); +} + +sub output_blockhead_text(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + + foreach $section (@{$args{'sectionlist'}}) { + print " $section:\n"; + print " -> "; + output_highlight($args{'sections'}{$section}); + } +} + +## list mode output functions + +sub output_function_list(%) { + my %args = %{$_[0]}; + + print $args{'function'} . "\n"; +} + +# output enum in list +sub output_enum_list(%) { + my %args = %{$_[0]}; + print $args{'enum'} . "\n"; +} + +# output typedef in list +sub output_typedef_list(%) { + my %args = %{$_[0]}; + print $args{'typedef'} . "\n"; +} + +# output struct as list +sub output_struct_list(%) { + my %args = %{$_[0]}; + + print $args{'struct'} . "\n"; +} + +sub output_blockhead_list(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + + foreach $section (@{$args{'sectionlist'}}) { + print "DOC: $section\n"; + } +} + +## +# generic output function for all types (function, struct/union, typedef, enum); +# calls the generated, variable output_ function name based on +# functype and output_mode +sub output_declaration { + no strict 'refs'; + my $name = shift; + my $functype = shift; + my $func = "output_${functype}_$output_mode"; + if (($function_only==0) || + ( $function_only == 1 && defined($function_table{$name})) || + ( $function_only == 2 && !defined($function_table{$name}))) + { + &$func(@_); + $section_counter++; + } +} + +## +# generic output function - calls the right one based on current output mode. +sub output_blockhead { + no strict 'refs'; + my $func = "output_blockhead_" . $output_mode; + &$func(@_); + $section_counter++; +} + +## +# takes a declaration (struct, union, enum, typedef) and +# invokes the right handler. NOT called for functions. +sub dump_declaration($$) { + no strict 'refs'; + my ($prototype, $file) = @_; + my $func = "dump_" . $decl_type; + &$func(@_); +} + +sub dump_union($$) { + dump_struct(@_); +} + +sub dump_struct($$) { + my $x = shift; + my $file = shift; + my $nested; + + if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { + #my $decl_type = $1; + $declaration_name = $2; + my $members = $3; + + # ignore embedded structs or unions + $members =~ s/({.*})//g; + $nested = $1; + + # ignore members marked private: + $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos; + $members =~ s/\/\*\s*private:.*//gos; + # strip comments: + $members =~ s/\/\*.*?\*\///gos; + $nested =~ s/\/\*.*?\*\///gos; + # strip kmemcheck_bitfield_{begin,end}.*; + $members =~ s/kmemcheck_bitfield_.*?;//gos; + # strip attributes + $members =~ s/__aligned\s*\(.+\)//gos; + + create_parameterlist($members, ';', $file); + check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested); + + output_declaration($declaration_name, + 'struct', + {'struct' => $declaration_name, + 'module' => $modulename, + 'parameterlist' => \@parameterlist, + 'parameterdescs' => \%parameterdescs, + 'parametertypes' => \%parametertypes, + 'sectionlist' => \@sectionlist, + 'sections' => \%sections, + 'purpose' => $declaration_purpose, + 'type' => $decl_type + }); + } + else { + print STDERR "Error(${file}:$.): Cannot parse struct or union!\n"; + ++$errors; + } +} + +sub dump_enum($$) { + my $x = shift; + my $file = shift; + + $x =~ s@/\*.*?\*/@@gos; # strip comments. + $x =~ s/^#\s*define\s+.*$//; # strip #define macros inside enums + + if ($x =~ /enum\s+(\w+)\s*{(.*)}/) { + $declaration_name = $1; + my $members = $2; + + foreach my $arg (split ',', $members) { + $arg =~ s/^\s*(\w+).*/$1/; + push @parameterlist, $arg; + if (!$parameterdescs{$arg}) { + $parameterdescs{$arg} = $undescribed; + print STDERR "Warning(${file}:$.): Enum value '$arg' ". + "not described in enum '$declaration_name'\n"; + } + + } + + output_declaration($declaration_name, + 'enum', + {'enum' => $declaration_name, + 'module' => $modulename, + 'parameterlist' => \@parameterlist, + 'parameterdescs' => \%parameterdescs, + 'sectionlist' => \@sectionlist, + 'sections' => \%sections, + 'purpose' => $declaration_purpose + }); + } + else { + print STDERR "Error(${file}:$.): Cannot parse enum!\n"; + ++$errors; + } +} + +sub dump_typedef($$) { + my $x = shift; + my $file = shift; + + $x =~ s@/\*.*?\*/@@gos; # strip comments. + while (($x =~ /\(*.\)\s*;$/) || ($x =~ /\[*.\]\s*;$/)) { + $x =~ s/\(*.\)\s*;$/;/; + $x =~ s/\[*.\]\s*;$/;/; + } + + if ($x =~ /typedef.*\s+(\w+)\s*;/) { + $declaration_name = $1; + + output_declaration($declaration_name, + 'typedef', + {'typedef' => $declaration_name, + 'module' => $modulename, + 'sectionlist' => \@sectionlist, + 'sections' => \%sections, + 'purpose' => $declaration_purpose + }); + } + else { + print STDERR "Error(${file}:$.): Cannot parse typedef!\n"; + ++$errors; + } +} + +sub save_struct_actual($) { + my $actual = shift; + + # strip all spaces from the actual param so that it looks like one string item + $actual =~ s/\s*//g; + $struct_actual = $struct_actual . $actual . " "; +} + +sub create_parameterlist($$$) { + my $args = shift; + my $splitter = shift; + my $file = shift; + my $type; + my $param; + + # temporarily replace commas inside function pointer definition + while ($args =~ /(\([^\),]+),/) { + $args =~ s/(\([^\),]+),/$1#/g; + } + + foreach my $arg (split($splitter, $args)) { + # strip comments + $arg =~ s/\/\*.*\*\///; + # strip leading/trailing spaces + $arg =~ s/^\s*//; + $arg =~ s/\s*$//; + $arg =~ s/\s+/ /; + + if ($arg =~ /^#/) { + # Treat preprocessor directive as a typeless variable just to fill + # corresponding data structures "correctly". Catch it later in + # output_* subs. + push_parameter($arg, "", $file); + } elsif ($arg =~ m/\(.+\)\s*\(/) { + # pointer-to-function + $arg =~ tr/#/,/; + $arg =~ m/[^\(]+\(\*?\s*(\w*)\s*\)/; + $param = $1; + $type = $arg; + $type =~ s/([^\(]+\(\*?)\s*$param/$1/; + save_struct_actual($param); + push_parameter($param, $type, $file); + } elsif ($arg) { + $arg =~ s/\s*:\s*/:/g; + $arg =~ s/\s*\[/\[/g; + + my @args = split('\s*,\s*', $arg); + if ($args[0] =~ m/\*/) { + $args[0] =~ s/(\*+)\s*/ $1/; + } + + my @first_arg; + if ($args[0] =~ /^(.*\s+)(.*?\[.*\].*)$/) { + shift @args; + push(@first_arg, split('\s+', $1)); + push(@first_arg, $2); + } else { + @first_arg = split('\s+', shift @args); + } + + unshift(@args, pop @first_arg); + $type = join " ", @first_arg; + + foreach $param (@args) { + if ($param =~ m/^(\*+)\s*(.*)/) { + save_struct_actual($2); + push_parameter($2, "$type $1", $file); + } + elsif ($param =~ m/(.*?):(\d+)/) { + if ($type ne "") { # skip unnamed bit-fields + save_struct_actual($1); + push_parameter($1, "$type:$2", $file) + } + } + else { + save_struct_actual($param); + push_parameter($param, $type, $file); + } + } + } + } +} + +sub push_parameter($$$) { + my $param = shift; + my $type = shift; + my $file = shift; + + if (($anon_struct_union == 1) && ($type eq "") && + ($param eq "}")) { + return; # ignore the ending }; from anon. struct/union + } + + $anon_struct_union = 0; + my $param_name = $param; + $param_name =~ s/\[.*//; + + if ($type eq "" && $param =~ /\.\.\.$/) + { + if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") { + $parameterdescs{$param} = "variable arguments"; + } + } + elsif ($type eq "" && ($param eq "" or $param eq "void")) + { + $param="void"; + $parameterdescs{void} = "no arguments"; + } + elsif ($type eq "" && ($param eq "struct" or $param eq "union")) + # handle unnamed (anonymous) union or struct: + { + $type = $param; + $param = "{unnamed_" . $param . "}"; + $parameterdescs{$param} = "anonymous\n"; + $anon_struct_union = 1; + } + + # warn if parameter has no description + # (but ignore ones starting with # as these are not parameters + # but inline preprocessor statements); + # also ignore unnamed structs/unions; + if (!$anon_struct_union) { + if (!defined $parameterdescs{$param_name} && $param_name !~ /^#/) { + + $parameterdescs{$param_name} = $undescribed; + + if (($type eq 'function') || ($type eq 'enum')) { + print STDERR "Warning(${file}:$.): Function parameter ". + "or member '$param' not " . + "described in '$declaration_name'\n"; + } + print STDERR "Warning(${file}:$.):" . + " No description found for parameter '$param'\n"; + ++$warnings; + } + } + + $param = xml_escape($param); + + # strip spaces from $param so that it is one continuous string + # on @parameterlist; + # this fixes a problem where check_sections() cannot find + # a parameter like "addr[6 + 2]" because it actually appears + # as "addr[6", "+", "2]" on the parameter list; + # but it's better to maintain the param string unchanged for output, + # so just weaken the string compare in check_sections() to ignore + # "[blah" in a parameter string; + ###$param =~ s/\s*//g; + push @parameterlist, $param; + $parametertypes{$param} = $type; +} + +sub check_sections($$$$$$) { + my ($file, $decl_name, $decl_type, $sectcheck, $prmscheck, $nested) = @_; + my @sects = split ' ', $sectcheck; + my @prms = split ' ', $prmscheck; + my $err; + my ($px, $sx); + my $prm_clean; # strip trailing "[array size]" and/or beginning "*" + + foreach $sx (0 .. $#sects) { + $err = 1; + foreach $px (0 .. $#prms) { + $prm_clean = $prms[$px]; + $prm_clean =~ s/\[.*\]//; + $prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//i; + # ignore array size in a parameter string; + # however, the original param string may contain + # spaces, e.g.: addr[6 + 2] + # and this appears in @prms as "addr[6" since the + # parameter list is split at spaces; + # hence just ignore "[..." for the sections check; + $prm_clean =~ s/\[.*//; + + ##$prm_clean =~ s/^\**//; + if ($prm_clean eq $sects[$sx]) { + $err = 0; + last; + } + } + if ($err) { + if ($decl_type eq "function") { + print STDERR "Warning(${file}:$.): " . + "Excess function parameter " . + "'$sects[$sx]' " . + "description in '$decl_name'\n"; + ++$warnings; + } else { + if ($nested !~ m/\Q$sects[$sx]\E/) { + print STDERR "Warning(${file}:$.): " . + "Excess struct/union/enum/typedef member " . + "'$sects[$sx]' " . + "description in '$decl_name'\n"; + ++$warnings; + } + } + } + } +} + +## +# Checks the section describing the return value of a function. +sub check_return_section { + my $file = shift; + my $declaration_name = shift; + my $return_type = shift; + + # Ignore an empty return type (It's a macro) + # Ignore functions with a "void" return type. (But don't ignore "void *") + if (($return_type eq "") || ($return_type =~ /void\s*\w*\s*$/)) { + return; + } + + if (!defined($sections{$section_return}) || + $sections{$section_return} eq "") { + print STDERR "Warning(${file}:$.): " . + "No description found for return value of " . + "'$declaration_name'\n"; + ++$warnings; + } +} + +## +# takes a function prototype and the name of the current file being +# processed and spits out all the details stored in the global +# arrays/hashes. +sub dump_function($$) { + my $prototype = shift; + my $file = shift; + + $prototype =~ s/^static +//; + $prototype =~ s/^extern +//; + $prototype =~ s/^asmlinkage +//; + $prototype =~ s/^inline +//; + $prototype =~ s/^__inline__ +//; + $prototype =~ s/^__inline +//; + $prototype =~ s/^__always_inline +//; + $prototype =~ s/^noinline +//; + $prototype =~ s/__init +//; + $prototype =~ s/__init_or_module +//; + $prototype =~ s/__must_check +//; + $prototype =~ s/__weak +//; + $prototype =~ s/^#\s*define\s+//; #ak added + $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; + + # Yes, this truly is vile. We are looking for: + # 1. Return type (may be nothing if we're looking at a macro) + # 2. Function name + # 3. Function parameters. + # + # All the while we have to watch out for function pointer parameters + # (which IIRC is what the two sections are for), C types (these + # regexps don't even start to express all the possibilities), and + # so on. + # + # If you mess with these regexps, it's a good idea to check that + # the following functions' documentation still comes out right: + # - parport_register_device (function pointer parameters) + # - atomic_set (macro) + # - pci_match_device, __copy_to_user (long return type) + + if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s*\*+)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s+\w+\s+\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/ || + $prototype =~ m/^(\w+\s+\w+\s*\*\s*\w+\s*\*\s*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\{]*)\)/) { + $return_type = $1; + $declaration_name = $2; + my $args = $3; + + create_parameterlist($args, ',', $file); + } else { + print STDERR "Warning(${file}:$.): cannot understand function prototype: '$prototype'\n"; + return; + } + + my $prms = join " ", @parameterlist; + check_sections($file, $declaration_name, "function", $sectcheck, $prms, ""); + + # This check emits a lot of warnings at the moment, because many + # functions don't have a 'Return' doc section. So until the number + # of warnings goes sufficiently down, the check is only performed in + # verbose mode. + # TODO: always perform the check. + if ($verbose) { + check_return_section($file, $declaration_name, $return_type); + } + + output_declaration($declaration_name, + 'function', + {'function' => $declaration_name, + 'module' => $modulename, + 'functiontype' => $return_type, + 'parameterlist' => \@parameterlist, + 'parameterdescs' => \%parameterdescs, + 'parametertypes' => \%parametertypes, + 'sectionlist' => \@sectionlist, + 'sections' => \%sections, + 'purpose' => $declaration_purpose + }); +} + +sub reset_state { + $function = ""; + %constants = (); + %parameterdescs = (); + %parametertypes = (); + @parameterlist = (); + %sections = (); + @sectionlist = (); + $sectcheck = ""; + $struct_actual = ""; + $prototype = ""; + + $state = 0; +} + +sub tracepoint_munge($) { + my $file = shift; + my $tracepointname = 0; + my $tracepointargs = 0; + + if ($prototype =~ m/TRACE_EVENT\((.*?),/) { + $tracepointname = $1; + } + if ($prototype =~ m/DEFINE_SINGLE_EVENT\((.*?),/) { + $tracepointname = $1; + } + if ($prototype =~ m/DEFINE_EVENT\((.*?),(.*?),/) { + $tracepointname = $2; + } + $tracepointname =~ s/^\s+//; #strip leading whitespace + if ($prototype =~ m/TP_PROTO\((.*?)\)/) { + $tracepointargs = $1; + } + if (($tracepointname eq 0) || ($tracepointargs eq 0)) { + print STDERR "Warning(${file}:$.): Unrecognized tracepoint format: \n". + "$prototype\n"; + } else { + $prototype = "static inline void trace_$tracepointname($tracepointargs)"; + } +} + +sub syscall_munge() { + my $void = 0; + + $prototype =~ s@[\r\n\t]+@ @gos; # strip newlines/CR's/tabs +## if ($prototype =~ m/SYSCALL_DEFINE0\s*\(\s*(a-zA-Z0-9_)*\s*\)/) { + if ($prototype =~ m/SYSCALL_DEFINE0/) { + $void = 1; +## $prototype = "long sys_$1(void)"; + } + + $prototype =~ s/SYSCALL_DEFINE.*\(/long sys_/; # fix return type & func name + if ($prototype =~ m/long (sys_.*?),/) { + $prototype =~ s/,/\(/; + } elsif ($void) { + $prototype =~ s/\)/\(void\)/; + } + + # now delete all of the odd-number commas in $prototype + # so that arg types & arg names don't have a comma between them + my $count = 0; + my $len = length($prototype); + if ($void) { + $len = 0; # skip the for-loop + } + for (my $ix = 0; $ix < $len; $ix++) { + if (substr($prototype, $ix, 1) eq ',') { + $count++; + if ($count % 2 == 1) { + substr($prototype, $ix, 1) = ' '; + } + } + } +} + +sub process_state3_function($$) { + my $x = shift; + my $file = shift; + + $x =~ s@\/\/.*$@@gos; # strip C99-style comments to end of line + + if ($x =~ m#\s*/\*\s+MACDOC\s*#io || ($x =~ /^#/ && $x !~ /^#\s*define/)) { + # do nothing + } + elsif ($x =~ /([^\{]*)/) { + $prototype .= $1; + } + + if (($x =~ /\{/) || ($x =~ /\#\s*define/) || ($x =~ /;/)) { + $prototype =~ s@/\*.*?\*/@@gos; # strip comments. + $prototype =~ s@[\r\n]+@ @gos; # strip newlines/cr's. + $prototype =~ s@^\s+@@gos; # strip leading spaces + if ($prototype =~ /SYSCALL_DEFINE/) { + syscall_munge(); + } + if ($prototype =~ /TRACE_EVENT/ || $prototype =~ /DEFINE_EVENT/ || + $prototype =~ /DEFINE_SINGLE_EVENT/) + { + tracepoint_munge($file); + } + dump_function($prototype, $file); + reset_state(); + } +} + +sub process_state3_type($$) { + my $x = shift; + my $file = shift; + + $x =~ s@[\r\n]+@ @gos; # strip newlines/cr's. + $x =~ s@^\s+@@gos; # strip leading spaces + $x =~ s@\s+$@@gos; # strip trailing spaces + $x =~ s@\/\/.*$@@gos; # strip C99-style comments to end of line + + if ($x =~ /^#/) { + # To distinguish preprocessor directive from regular declaration later. + $x .= ";"; + } + + while (1) { + if ( $x =~ /([^{};]*)([{};])(.*)/ ) { + $prototype .= $1 . $2; + ($2 eq '{') && $brcount++; + ($2 eq '}') && $brcount--; + if (($2 eq ';') && ($brcount == 0)) { + dump_declaration($prototype, $file); + reset_state(); + last; + } + $x = $3; + } else { + $prototype .= $x; + last; + } + } +} + +# xml_escape: replace <, >, and & in the text stream; +# +# however, formatting controls that are generated internally/locally in the +# kernel-doc script are not escaped here; instead, they begin life like +# $blankline_html (4 of '\' followed by a mnemonic + ':'), then these strings +# are converted to their mnemonic-expected output, without the 4 * '\' & ':', +# just before actual output; (this is done by local_unescape()) +sub xml_escape($) { + my $text = shift; + if (($output_mode eq "text") || ($output_mode eq "man")) { + return $text; + } + $text =~ s/\&/\\\\\\amp;/g; + $text =~ s/\/\\\\\\gt;/g; + return $text; +} + +# convert local escape strings to html +# local escape strings look like: '\\\\menmonic:' (that's 4 backslashes) +sub local_unescape($) { + my $text = shift; + if (($output_mode eq "text") || ($output_mode eq "man")) { + return $text; + } + $text =~ s/\\\\\\\\lt://g; + return $text; +} + +sub process_file($) { + my $file; + my $identifier; + my $func; + my $descr; + my $in_purpose = 0; + my $initial_section_counter = $section_counter; + + if (defined($ENV{'SRCTREE'})) { + $file = "$ENV{'SRCTREE'}" . "/" . "@_"; + } + else { + $file = "@_"; + } + if (defined($source_map{$file})) { + $file = $source_map{$file}; + } + + if (!open(IN,"<$file")) { + print STDERR "Error: Cannot open file $file\n"; + ++$errors; + return; + } + + $. = 1; + + $section_counter = 0; + while () { + while (s/\\\s*$//) { + $_ .= ; + } + if ($state == 0) { + if (/$doc_start/o) { + $state = 1; # next line is always the function name + $in_doc_sect = 0; + } + } elsif ($state == 1) { # this line is the function name (always) + if (/$doc_block/o) { + $state = 4; + $contents = ""; + if ( $1 eq "" ) { + $section = $section_intro; + } else { + $section = $1; + } + } + elsif (/$doc_decl/o) { + $identifier = $1; + if (/\s*([\w\s]+?)\s*-/) { + $identifier = $1; + } + + $state = 2; + if (/-(.*)/) { + # strip leading/trailing/multiple spaces + $descr= $1; + $descr =~ s/^\s*//; + $descr =~ s/\s*$//; + $descr =~ s/\s+/ /g; + $declaration_purpose = xml_escape($descr); + $in_purpose = 1; + } else { + $declaration_purpose = ""; + } + + if (($declaration_purpose eq "") && $verbose) { + print STDERR "Warning(${file}:$.): missing initial short description on line:\n"; + print STDERR $_; + ++$warnings; + } + + if ($identifier =~ m/^struct/) { + $decl_type = 'struct'; + } elsif ($identifier =~ m/^union/) { + $decl_type = 'union'; + } elsif ($identifier =~ m/^enum/) { + $decl_type = 'enum'; + } elsif ($identifier =~ m/^typedef/) { + $decl_type = 'typedef'; + } else { + $decl_type = 'function'; + } + + if ($verbose) { + print STDERR "Info(${file}:$.): Scanning doc for $identifier\n"; + } + } else { + print STDERR "Warning(${file}:$.): Cannot understand $_ on line $.", + " - I thought it was a doc line\n"; + ++$warnings; + $state = 0; + } + } elsif ($state == 2) { # look for head: lines, and include content + if (/$doc_sect/o) { + $newsection = $1; + $newcontents = $2; + + if (($contents ne "") && ($contents ne "\n")) { + if (!$in_doc_sect && $verbose) { + print STDERR "Warning(${file}:$.): contents before sections\n"; + ++$warnings; + } + dump_section($file, $section, xml_escape($contents)); + $section = $section_default; + } + + $in_doc_sect = 1; + $in_purpose = 0; + $contents = $newcontents; + if ($contents ne "") { + while ((substr($contents, 0, 1) eq " ") || + substr($contents, 0, 1) eq "\t") { + $contents = substr($contents, 1); + } + $contents .= "\n"; + } + $section = $newsection; + } elsif (/$doc_end/) { + + if (($contents ne "") && ($contents ne "\n")) { + dump_section($file, $section, xml_escape($contents)); + $section = $section_default; + $contents = ""; + } + # look for doc_com + + doc_end: + if ($_ =~ m'\s*\*\s*[a-zA-Z_0-9:\.]+\*/') { + print STDERR "Warning(${file}:$.): suspicious ending line: $_"; + ++$warnings; + } + + $prototype = ""; + $state = 3; + $brcount = 0; +# print STDERR "end of doc comment, looking for prototype\n"; + } elsif (/$doc_content/) { + # miguel-style comment kludge, look for blank lines after + # @parameter line to signify start of description + if ($1 eq "") { + if ($section =~ m/^@/ || $section eq $section_context) { + dump_section($file, $section, xml_escape($contents)); + $section = $section_default; + $contents = ""; + } else { + $contents .= "\n"; + } + $in_purpose = 0; + } elsif ($in_purpose == 1) { + # Continued declaration purpose + chomp($declaration_purpose); + $declaration_purpose .= " " . xml_escape($1); + $declaration_purpose =~ s/\s+/ /g; + } else { + $contents .= $1 . "\n"; + } + } else { + # i dont know - bad line? ignore. + print STDERR "Warning(${file}:$.): bad line: $_"; + ++$warnings; + } + } elsif ($state == 3) { # scanning for function '{' (end of prototype) + if ($decl_type eq 'function') { + process_state3_function($_, $file); + } else { + process_state3_type($_, $file); + } + } elsif ($state == 4) { + # Documentation block + if (/$doc_block/) { + dump_doc_section($file, $section, xml_escape($contents)); + $contents = ""; + $function = ""; + %constants = (); + %parameterdescs = (); + %parametertypes = (); + @parameterlist = (); + %sections = (); + @sectionlist = (); + $prototype = ""; + if ( $1 eq "" ) { + $section = $section_intro; + } else { + $section = $1; + } + } + elsif (/$doc_end/) + { + dump_doc_section($file, $section, xml_escape($contents)); + $contents = ""; + $function = ""; + %constants = (); + %parameterdescs = (); + %parametertypes = (); + @parameterlist = (); + %sections = (); + @sectionlist = (); + $prototype = ""; + $state = 0; + } + elsif (/$doc_content/) + { + if ( $1 eq "" ) + { + $contents .= $blankline; + } + else + { + $contents .= $1 . "\n"; + } + } + } + } + if ($initial_section_counter == $section_counter) { + print STDERR "Warning(${file}): no structured comments found\n"; + if (($function_only == 1) && ($show_not_found == 1)) { + print STDERR " Was looking for '$_'.\n" for keys %function_table; + } + if ($output_mode eq "xml") { + # The template wants at least one RefEntry here; make one. + print "\n"; + print " \n"; + print " \n"; + print " ${file}\n"; + print " \n"; + print " \n"; + print " Document generation inconsistency\n"; + print " \n"; + print " \n"; + print " \n"; + print " \n"; + print " Oops\n"; + print " \n"; + print " \n"; + print " \n"; + print " The template for this document tried to insert\n"; + print " the structured comment from the file\n"; + print " ${file} at this point,\n"; + print " but none was found.\n"; + print " This dummy section is inserted to allow\n"; + print " generation to continue.\n"; + print " \n"; + print " \n"; + print " \n"; + print "\n"; + } + } +} + + +$kernelversion = get_kernel_version(); + +# generate a sequence of code that will splice in highlighting information +# using the s// operator. +foreach my $pattern (keys %highlights) { +# print STDERR "scanning pattern:$pattern, highlight:($highlights{$pattern})\n"; + $dohighlight .= "\$contents =~ s:$pattern:$highlights{$pattern}:gs;\n"; +} + +# Read the file that maps relative names to absolute names for +# separate source and object directories and for shadow trees. +if (open(SOURCE_MAP, "<.tmp_filelist.txt")) { + my ($relname, $absname); + while() { + chop(); + ($relname, $absname) = (split())[0..1]; + $relname =~ s:^/+::; + $source_map{$relname} = $absname; + } + close(SOURCE_MAP); +} + +foreach (@ARGV) { + chomp; + process_file($_); +} +if ($verbose && $errors) { + print STDERR "$errors errors\n"; +} +if ($verbose && $warnings) { + print STDERR "$warnings warnings\n"; +} + +exit($errors); diff --git a/qemu/roms/u-boot/scripts/ld-version.sh b/qemu/roms/u-boot/scripts/ld-version.sh new file mode 100755 index 000000000..198580d24 --- /dev/null +++ b/qemu/roms/u-boot/scripts/ld-version.sh @@ -0,0 +1,8 @@ +#!/usr/bin/awk -f +# extract linker version number from stdin and turn into single number + { + gsub(".*)", ""); + split($1,a, "."); + print a[1]*10000000 + a[2]*100000 + a[3]*10000 + a[4]*100 + a[5]; + exit + } diff --git a/qemu/roms/u-boot/scripts/mkmakefile b/qemu/roms/u-boot/scripts/mkmakefile new file mode 100644 index 000000000..0cc044260 --- /dev/null +++ b/qemu/roms/u-boot/scripts/mkmakefile @@ -0,0 +1,59 @@ +#!/bin/sh +# Generates a small Makefile used in the root of the output +# directory, to allow make to be started from there. +# The Makefile also allow for more convinient build of external modules + +# Usage +# $1 - Kernel src directory +# $2 - Output directory +# $3 - version +# $4 - patchlevel + + +test ! -r $2/Makefile -o -O $2/Makefile || exit 0 +# Only overwrite automatically generated Makefiles +# (so we do not overwrite kernel Makefile) +if test -e $2/Makefile && ! grep -q Automatically $2/Makefile +then + exit 0 +fi +if [ "${quiet}" != "silent_" ]; then + echo " GEN $2/Makefile" +fi + +cat << EOF > $2/Makefile +# Automatically generated by $0: don't edit + +VERSION = $3 +PATCHLEVEL = $4 + +lastword = \$(word \$(words \$(1)),\$(1)) +makedir := \$(dir \$(call lastword,\$(MAKEFILE_LIST))) + +ifeq ("\$(origin V)", "command line") +VERBOSE := \$(V) +endif +ifneq (\$(VERBOSE),1) +Q := @ +endif + +MAKEARGS := -C $1 +MAKEARGS += O=\$(if \$(patsubst /%,,\$(makedir)),\$(CURDIR)/)\$(patsubst %/,%,\$(makedir)) + +MAKEFLAGS += --no-print-directory + +.PHONY: all \$(MAKECMDGOALS) + +all := \$(filter-out all Makefile,\$(MAKECMDGOALS)) + +all: + \$(Q)\$(MAKE) \$(MAKEARGS) \$(all) + +Makefile:; + +\$(all): all + @: + +%/: all + @: +EOF diff --git a/qemu/roms/u-boot/scripts/objdiff b/qemu/roms/u-boot/scripts/objdiff new file mode 100755 index 000000000..b3e4f10bf --- /dev/null +++ b/qemu/roms/u-boot/scripts/objdiff @@ -0,0 +1,141 @@ +#!/bin/bash + +# objdiff - a small script for validating that a commit or series of commits +# didn't change object code. +# +# Copyright 2014, Jason Cooper +# +# Licensed under the terms of the GNU GPL version 2 + +# usage example: +# +# $ git checkout COMMIT_A +# $ +# $ ./scripts/objdiff record path/to/*.o +# +# $ git checkout COMMIT_B +# $ +# $ ./scripts/objdiff record path/to/*.o +# +# $ ./scripts/objdiff diff COMMIT_A COMMIT_B +# $ + +# And to clean up (everything is in .tmp_objdiff/*) +# $ ./scripts/objdiff clean all +# +# Note: 'make mrproper' will also remove .tmp_objdiff + +GIT_DIR="`git rev-parse --git-dir`" + +if [ -d "$GIT_DIR" ]; then + TMPD="${GIT_DIR%git}tmp_objdiff" + + [ -d "$TMPD" ] || mkdir "$TMPD" +else + echo "ERROR: git directory not found." + exit 1 +fi + +usage() { + echo "Usage: $0 " + echo " record " + echo " diff " + echo " clean all | " + exit 1 +} + +dorecord() { + [ $# -eq 0 ] && usage + + FILES="$*" + + CMT="`git rev-parse --short HEAD`" + + OBJDUMP="${CROSS_COMPILE}objdump" + OBJDIFFD="$TMPD/$CMT" + + [ ! -d "$OBJDIFFD" ] && mkdir -p "$OBJDIFFD" + + for f in $FILES; do + dn="${f%/*}" + bn="${f##*/}" + + [ ! -d "$OBJDIFFD/$dn" ] && mkdir -p "$OBJDIFFD/$dn" + + # remove addresses for a more clear diff + # http://dummdida.tumblr.com/post/60924060451/binary-diff-between-libc-from-scientificlinux-and + $OBJDUMP -D "$f" | sed "s/^[[:space:]]\+[0-9a-f]\+//" \ + >"$OBJDIFFD/$dn/$bn" + done +} + +dodiff() { + [ $# -ne 2 ] && [ $# -ne 0 ] && usage + + if [ $# -eq 0 ]; then + SRC="`git rev-parse --short HEAD^`" + DST="`git rev-parse --short HEAD`" + else + SRC="`git rev-parse --short $1`" + DST="`git rev-parse --short $2`" + fi + + DIFF="`which colordiff`" + + if [ ${#DIFF} -eq 0 ] || [ ! -x "$DIFF" ]; then + DIFF="`which diff`" + fi + + SRCD="$TMPD/$SRC" + DSTD="$TMPD/$DST" + + if [ ! -d "$SRCD" ]; then + echo "ERROR: $SRCD doesn't exist" + exit 1 + fi + + if [ ! -d "$DSTD" ]; then + echo "ERROR: $DSTD doesn't exist" + exit 1 + fi + + $DIFF -Nurd $SRCD $DSTD +} + +doclean() { + [ $# -eq 0 ] && usage + [ $# -gt 1 ] && usage + + if [ "x$1" = "xall" ]; then + rm -rf $TMPD/* + else + CMT="`git rev-parse --short $1`" + + if [ -d "$TMPD/$CMT" ]; then + rm -rf $TMPD/$CMT + else + echo "$CMT not found" + fi + fi +} + +[ $# -eq 0 ] && usage + +case "$1" in + record) + shift + dorecord $* + ;; + diff) + shift + dodiff $* + ;; + clean) + shift + doclean $* + ;; + *) + echo "Unrecognized command '$1'" + exit 1 + ;; +esac diff --git a/qemu/roms/u-boot/scripts/setlocalversion b/qemu/roms/u-boot/scripts/setlocalversion new file mode 100755 index 000000000..f551b4c4f --- /dev/null +++ b/qemu/roms/u-boot/scripts/setlocalversion @@ -0,0 +1,177 @@ +#!/bin/sh +# +# This scripts adds local version information from the version +# control systems git, mercurial (hg) and subversion (svn). +# +# It was originally copied from the Linux kernel v3.2.0-rc4 and modified +# to support the U-Boot build-system. +# + +usage() { + echo "Usage: $0 [--save-scmversion] [srctree]" >&2 + exit 1 +} + +scm_only=false +srctree=. +if test "$1" = "--save-scmversion"; then + scm_only=true + shift +fi +if test $# -gt 0; then + srctree=$1 + shift +fi +if test $# -gt 0 -o ! -d "$srctree"; then + usage +fi + +scm_version() +{ + local short + short=false + + cd "$srctree" + if test -e .scmversion; then + cat .scmversion + return + fi + if test "$1" = "--short"; then + short=true + fi + + # Check for git and a git repo. + if test -e .git && head=`git rev-parse --verify --short HEAD 2>/dev/null`; then + + # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore + # it, because this version is defined in the top level Makefile. + if [ -z "`git describe --exact-match 2>/dev/null`" ]; then + + # If only the short version is requested, don't bother + # running further git commands + if $short; then + echo "+" + return + fi + # If we are past a tagged commit (like + # "v2.6.30-rc5-302-g72357d5"), we pretty print it. + if atag="`git describe 2>/dev/null`"; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + + # If we don't have a tag at all we print -g{commitish}. + else + printf '%s%s' -g $head + fi + fi + + # Is this git on svn? + if git config --get svn-remote.svn.url >/dev/null; then + printf -- '-svn%s' "`git svn find-rev $head`" + fi + + # Update index only on r/w media + [ -w . ] && git update-index --refresh --unmerged > /dev/null + + # Check for uncommitted changes + if git diff-index --name-only HEAD | grep -v "^scripts/package" \ + | read dummy; then + printf '%s' -dirty + fi + + # All done with git + return + fi + + # Check for mercurial and a mercurial repo. + if test -d .hg && hgid=`hg id 2>/dev/null`; then + # Do we have an tagged version? If so, latesttagdistance == 1 + if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then + id=`hg log -r . --template '{latesttag}'` + printf '%s%s' -hg "$id" + else + tag=`printf '%s' "$hgid" | cut -d' ' -f2` + if [ -z "$tag" -o "$tag" = tip ]; then + id=`printf '%s' "$hgid" | sed 's/[+ ].*//'` + printf '%s%s' -hg "$id" + fi + fi + + # Are there uncommitted changes? + # These are represented by + after the changeset id. + case "$hgid" in + *+|*+\ *) printf '%s' -dirty ;; + esac + + # All done with mercurial + return + fi + + # Check for svn and a svn repo. + if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then + rev=`echo $rev | awk '{print $NF}'` + printf -- '-svn%s' "$rev" + + # All done with svn + return + fi +} + +collect_files() +{ + local file res + + for file; do + case "$file" in + *\~*) + continue + ;; + esac + if test -e "$file"; then + res="$res$(cat "$file")" + fi + done + echo "$res" +} + +if $scm_only; then + if test ! -e .scmversion; then + res=$(scm_version) + echo "$res" >.scmversion + fi + exit +fi + +#if test -e include/config/auto.conf; then +# . include/config/auto.conf +#else +# echo "Error: kernelrelease not valid - run 'make prepare' to update it" +# exit 1 +#fi +CONFIG_LOCALVERSION= +CONFIG_LOCALVERSION_AUTO=y + +# localversion* files in the build and source directory +res="$(collect_files localversion*)" +if test ! "$srctree" -ef .; then + res="$res$(collect_files "$srctree"/localversion*)" +fi + +# CONFIG_LOCALVERSION and LOCALVERSION (if set) +res="${res}${CONFIG_LOCALVERSION}${LOCALVERSION}" + +# scm version string if not at a tagged commit +if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then + # full scm version string + res="$res$(scm_version)" +else + # append a plus sign if the repository is not in a clean + # annotated or signed tagged state (as git describe only + # looks at signed or annotated tags - git tag -a/-s) and + # LOCALVERSION= is not specified + if test "${LOCALVERSION+set}" != "set"; then + scm=$(scm_version --short) + res="$res${scm:++}" + fi +fi + +echo "$res" -- cgit 1.2.3-korg