From bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 Mon Sep 17 00:00:00 2001 From: RajithaY Date: Tue, 25 Apr 2017 03:31:15 -0700 Subject: Adding qemu as a submodule of KVMFORNFV This Patch includes the changes to add qemu as a submodule to kvmfornfv repo and make use of the updated latest qemu for the execution of all testcase Change-Id: I1280af507a857675c7f81d30c95255635667bdd7 Signed-off-by:RajithaY --- qemu/roms/u-boot/doc/README.mxc_ocotp | 51 ----------------------------------- 1 file changed, 51 deletions(-) delete mode 100644 qemu/roms/u-boot/doc/README.mxc_ocotp (limited to 'qemu/roms/u-boot/doc/README.mxc_ocotp') diff --git a/qemu/roms/u-boot/doc/README.mxc_ocotp b/qemu/roms/u-boot/doc/README.mxc_ocotp deleted file mode 100644 index 7a2863cfd..000000000 --- a/qemu/roms/u-boot/doc/README.mxc_ocotp +++ /dev/null @@ -1,51 +0,0 @@ -Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP) -on MXC - -This IP can be found on the following SoCs: - - Vybrid VF610, - - i.MX6. - -Note that this IP is different from albeit similar to the IPs of the same name -that can be found on the following SoCs: - - i.MX23, - - i.MX28, - - i.MX50. - -The section numbers in this file refer to the i.MX6 Reference Manual. - -A fuse word contains 32 fuse bit slots, as explained in 46.2.1. - -A bank contains 8 fuse word slots, as explained in 46.2.1 and shown by the -memory map in 46.4. - -Some fuse bit or word slots may not have the corresponding fuses actually -implemented in the fusebox. - -See the README files of the SoCs using this driver in order to know the -conventions used by U-Boot to store some specific data in the fuses, e.g. MAC -addresses. - -Fuse operations: - - Read - Read operations are implemented as read accesses to the shadow registers, - using "Bankx Wordy" from the memory map in 46.4. This is explained in - detail by the first two paragraphs in 46.2.1.2. - - Sense - Sense operations are implemented as the direct fusebox read explained by - the steps in 46.2.1.2. - - Program - Program operations are implemented as explained by the steps in 46.2.1.3. - Following this operation, the shadow registers are not reloaded by the - hardware. - - Override - Override operations are implemented as write accesses to the shadow - registers, as explained by the first paragraph in 46.2.1.3. - -Configuration: - - CONFIG_MXC_OCOTP - Define this to enable the mxc_ocotp driver. -- cgit 1.2.3-korg