From e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Fri, 28 Aug 2015 09:58:54 +0800 Subject: Add qemu 2.4.0 Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang --- qemu/roms/u-boot/MAKEALL | 846 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 846 insertions(+) create mode 100755 qemu/roms/u-boot/MAKEALL (limited to 'qemu/roms/u-boot/MAKEALL') diff --git a/qemu/roms/u-boot/MAKEALL b/qemu/roms/u-boot/MAKEALL new file mode 100755 index 000000000..020e65fdc --- /dev/null +++ b/qemu/roms/u-boot/MAKEALL @@ -0,0 +1,846 @@ +#!/bin/bash +# Tool mainly for U-Boot Quality Assurance: build one or more board +# configurations with minimal verbosity, showing only warnings and +# errors. +# +# SPDX-License-Identifier: GPL-2.0+ + +usage() +{ + # if exiting with 0, write to stdout, else write to stderr + local ret=${1:-0} + [ "${ret}" -eq 1 ] && exec 1>&2 + cat <<-EOF + Usage: MAKEALL [options] [--] [boards-to-build] + + Options: + -a ARCH, --arch ARCH Build all boards with arch ARCH + -c CPU, --cpu CPU Build all boards with cpu CPU + -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR + -s SOC, --soc SOC Build all boards with soc SOC + -b BOARD, --board BOARD Build all boards with board name BOARD + -l, --list List all targets to be built + -m, --maintainers List all targets and maintainer email + -M, --mails List all targets and all affilated emails + -C, --check Enable build checking + -n, --continue Continue (skip boards already built) + -r, --rebuild-errors Rebuild any boards that errored + -h, --help This help output + + Selections by these options are logically ANDed; if the same option + is used repeatedly, such selections are ORed. So "-v FOO -v BAR" + will select all configurations where the vendor is either FOO or + BAR. Any additional arguments specified on the command line are + always build additionally. See the boards.cfg file for more info. + + If no boards are specified, then the default is "powerpc". + + Environment variables: + BUILD_NCPUS number of parallel make jobs (default: auto) + CROSS_COMPILE cross-compiler toolchain prefix (default: "") + CROSS_COMPILE_ cross-compiler toolchain prefix for + architecture "ARCH". Substitute "ARCH" for any + supported architecture (default: "") + MAKEALL_LOGDIR output all logs to here (default: ./LOG/) + BUILD_DIR output build directory (default: ./) + BUILD_NBUILDS number of parallel targets (default: 1) + + Examples: + - build all Power Architecture boards: + MAKEALL -a powerpc + MAKEALL --arch powerpc + MAKEALL powerpc + - build all PowerPC boards manufactured by vendor "esd": + MAKEALL -a powerpc -v esd + - build all PowerPC boards manufactured either by "keymile" or "siemens": + MAKEALL -a powerpc -v keymile -v siemens + - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards: + MAKEALL -c mpc83xx -v freescale 4xx + EOF + exit ${ret} +} + +SHORT_OPTS="ha:c:v:s:b:lmMCnr" +LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors" + +# Option processing based on util-linux-2.13/getopt-parse.bash + +# Note that we use `"$@"' to let each command-line parameter expand to a +# separate word. The quotes around `$@' are essential! +# We need TEMP as the `eval set --' would nuke the return value of +# getopt. +TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \ + -n 'MAKEALL' -- "$@"` + +[ $? != 0 ] && usage 1 + +# Note the quotes around `$TEMP': they are essential! +eval set -- "$TEMP" + +SELECTED='' +ONLY_LIST='' +PRINT_MAINTS='' +MAINTAINERS_ONLY='' +CONTINUE='' +REBUILD_ERRORS='' + +while true ; do + case "$1" in + -a|--arch) + # echo "Option ARCH: argument \`$2'" + if [ "$opt_a" ] ; then + opt_a="${opt_a%)} || \$2 == \"$2\")" + else + opt_a="(\$2 == \"$2\")" + fi + SELECTED='y' + shift 2 ;; + -c|--cpu) + # echo "Option CPU: argument \`$2'" + if [ "$opt_c" ] ; then + opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)" + else + opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)" + fi + SELECTED='y' + shift 2 ;; + -s|--soc) + # echo "Option SoC: argument \`$2'" + if [ "$opt_s" ] ; then + opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)" + else + opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)" + fi + SELECTED='y' + shift 2 ;; + -v|--vendor) + # echo "Option VENDOR: argument \`$2'" + if [ "$opt_v" ] ; then + opt_v="${opt_v%)} || \$5 == \"$2\")" + else + opt_v="(\$5 == \"$2\")" + fi + SELECTED='y' + shift 2 ;; + -b|--board) + # echo "Option BOARD: argument \`$2'" + if [ "$opt_b" ] ; then + opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")" + else + # We need to check the 7th field too + # for boards whose 6th field is "-" + opt_b="(\$6 == \"$2\" || \$7 == \"$2\")" + fi + SELECTED='y' + shift 2 ;; + -C|--check) + CHECK='C=1' + shift ;; + -n|--continue) + CONTINUE='y' + shift ;; + -r|--rebuild-errors) + REBUILD_ERRORS='y' + shift ;; + -l|--list) + ONLY_LIST='y' + shift ;; + -m|--maintainers) + ONLY_LIST='y' + PRINT_MAINTS='y' + MAINTAINERS_ONLY='y' + shift ;; + -M|--mails) + ONLY_LIST='y' + PRINT_MAINTS='y' + shift ;; + -h|--help) + usage ;; + --) + shift ; break ;; + *) + echo "Internal error!" >&2 ; exit 1 ;; + esac +done +# echo "Remaining arguments:" +# for arg do echo '--> '"\`$arg'" ; done + +FILTER="\$1 !~ /^#/" +[ "$opt_a" ] && FILTER="${FILTER} && $opt_a" +[ "$opt_c" ] && FILTER="${FILTER} && $opt_c" +[ "$opt_s" ] && FILTER="${FILTER} && $opt_s" +[ "$opt_v" ] && FILTER="${FILTER} && $opt_v" +[ "$opt_b" ] && FILTER="${FILTER} && $opt_b" + +if [ "$SELECTED" ] ; then + SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg) + + # Make sure some boards from boards.cfg are actually found + if [ -z "$SELECTED" ] ; then + echo "Error: No boards selected, invalid arguments" + exit 1 + fi +fi + +######################################################################### + +# Print statistics when we exit +trap exit 1 2 3 15 +trap print_stats 0 + +# Determine number of CPU cores if no default was set +: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"} + +if [ "$BUILD_NCPUS" -gt 1 ] +then + JOBS="-j $((BUILD_NCPUS + 1))" +else + JOBS="" +fi + +if [ "${MAKEALL_LOGDIR}" ] ; then + LOG_DIR=${MAKEALL_LOGDIR} +else + LOG_DIR="LOG" +fi + +: ${BUILD_NBUILDS:=1} +BUILD_MANY=0 + +if [ "${BUILD_NBUILDS}" -gt 1 ] ; then + BUILD_MANY=1 + : ${BUILD_DIR:=./build} + mkdir -p "${BUILD_DIR}/ERR" + find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} + +fi + +: ${BUILD_DIR:=.} + +OUTPUT_PREFIX="${BUILD_DIR}" + +[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1 +if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then + find "${LOG_DIR}/" -type f -exec rm -f {} + +fi + +LIST="" + +# Keep track of the number of builds and errors +ERR_CNT=0 +ERR_LIST="" +WRN_CNT=0 +WRN_LIST="" +TOTAL_CNT=0 +SKIP_CNT=0 +CURRENT_CNT=0 +OLDEST_IDX=1 +RC=0 + +# Helper funcs for parsing boards.cfg +targets_by_field() +{ + field=$1 + regexp=$2 + + awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \ + boards.cfg +} + +targets_by_arch() { targets_by_field 2 "$@" ; } +targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; } +targets_by_soc() { targets_by_field 4 "$@" ; } + +######################################################################### +## MPC5xx Systems +######################################################################### + +LIST_5xx="$(targets_by_cpu mpc5xx)" + +######################################################################### +## MPC5xxx Systems +######################################################################### + +LIST_5xxx="$(targets_by_cpu mpc5xxx)" + +######################################################################### +## MPC512x Systems +######################################################################### + +LIST_512x="$(targets_by_cpu mpc512x)" + +######################################################################### +## MPC8xx Systems +######################################################################### + +LIST_8xx="$(targets_by_cpu mpc8xx)" + +######################################################################### +## PPC4xx Systems +######################################################################### + +LIST_4xx="$(targets_by_cpu ppc4xx)" + +######################################################################### +## MPC824x Systems +######################################################################### + +LIST_824x="$(targets_by_cpu mpc824x)" + +######################################################################### +## MPC8260 Systems (includes 8250, 8255 etc.) +######################################################################### + +LIST_8260="$(targets_by_cpu mpc8260)" + +######################################################################### +## MPC83xx Systems (includes 8349, etc.) +######################################################################### + +LIST_83xx="$(targets_by_cpu mpc83xx)" + +######################################################################### +## MPC85xx Systems (includes 8540, 8560 etc.) +######################################################################### + +LIST_85xx="$(targets_by_cpu mpc85xx)" + +######################################################################### +## MPC86xx Systems +######################################################################### + +LIST_86xx="$(targets_by_cpu mpc86xx)" + +######################################################################### +## 74xx/7xx Systems +######################################################################### + +LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)" + +######################################################################### +## PowerPC groups +######################################################################### + +LIST_TSEC=" \ + ${LIST_83xx} \ + ${LIST_85xx} \ + ${LIST_86xx} \ +" + +LIST_powerpc=" \ + ${LIST_5xx} \ + ${LIST_512x} \ + ${LIST_5xxx} \ + ${LIST_8xx} \ + ${LIST_824x} \ + ${LIST_8260} \ + ${LIST_83xx} \ + ${LIST_85xx} \ + ${LIST_86xx} \ + ${LIST_4xx} \ + ${LIST_74xx_7xx}\ +" + +# Alias "ppc" -> "powerpc" to not break compatibility with older scripts +# still using "ppc" instead of "powerpc" +LIST_ppc=" \ + ${LIST_powerpc} \ +" + +######################################################################### +## StrongARM Systems +######################################################################### + +LIST_SA="$(targets_by_cpu sa1100)" + +######################################################################### +## ARM7 Systems +######################################################################### + +LIST_ARM7="$(targets_by_cpu arm720t)" + +######################################################################### +## ARM9 Systems +######################################################################### + +LIST_ARM9="$(targets_by_cpu arm920t) \ + $(targets_by_cpu arm926ejs) \ + $(targets_by_cpu arm946es) \ +" + +######################################################################### +## ARM11 Systems +######################################################################### +LIST_ARM11="$(targets_by_cpu arm1136) \ + $(targets_by_cpu arm1176) \ +" + +######################################################################### +## ARMV7 Systems +######################################################################### + +LIST_ARMV7="$(targets_by_cpu armv7)" + +######################################################################### +## ARMV8 Systems +######################################################################### + +LIST_ARMV8="$(targets_by_cpu armv8)" + +######################################################################### +## AT91 Systems +######################################################################### + +LIST_at91="$(targets_by_soc at91)" + +######################################################################### +## Xscale Systems +######################################################################### + +LIST_pxa="$(targets_by_cpu pxa)" + +######################################################################### +## SPEAr Systems +######################################################################### + +LIST_spear="$(targets_by_soc spear)" + +######################################################################### +## ARM groups +######################################################################### + +LIST_arm="$(targets_by_arch arm | \ + for ARMV8_TARGET in $LIST_ARMV8; \ + do sed "/$ARMV8_TARGET/d"; \ + done) \ +" + +######################################################################### +## MIPS Systems (default = big endian) +######################################################################### + +LIST_mips="$(targets_by_arch mips)" + +######################################################################### +## OpenRISC Systems +######################################################################### + +LIST_openrisc="$(targets_by_arch openrisc)" + +######################################################################### +## x86 Systems +######################################################################### + +LIST_x86="$(targets_by_arch x86)" + +######################################################################### +## Nios-II Systems +######################################################################### + +LIST_nios2="$(targets_by_arch nios2)" + +######################################################################### +## MicroBlaze Systems +######################################################################### + +LIST_microblaze="$(targets_by_arch microblaze)" + +######################################################################### +## ColdFire Systems +######################################################################### + +LIST_m68k="$(targets_by_arch m68k)" +LIST_coldfire=${LIST_m68k} + +######################################################################### +## AVR32 Systems +######################################################################### + +LIST_avr32="$(targets_by_arch avr32)" + +######################################################################### +## Blackfin Systems +######################################################################### + +LIST_blackfin="$(targets_by_arch blackfin)" + +######################################################################### +## SH Systems +######################################################################### + +LIST_sh2="$(targets_by_cpu sh2)" +LIST_sh3="$(targets_by_cpu sh3)" +LIST_sh4="$(targets_by_cpu sh4)" + +LIST_sh="$(targets_by_arch sh)" + +######################################################################### +## SPARC Systems +######################################################################### + +LIST_sparc="$(targets_by_arch sparc)" + +######################################################################### +## NDS32 Systems +######################################################################### + +LIST_nds32="$(targets_by_arch nds32)" + +######################################################################### +## ARC Systems +######################################################################### + +LIST_arc="$(targets_by_arch arc)" + +#----------------------------------------------------------------------- + +get_target_location() { + local target=$1 + local BOARD_NAME="" + local CONFIG_NAME="" + local board="" + local vendor="" + + # Automatic mode + local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` + if [ -z "${line}" ] ; then echo "" ; return ; fi + + set ${line} + + CONFIG_NAME="${7%_config}" + + [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}" + + if [ $# -gt 5 ]; then + if [ "$6" = "-" ] ; then + board=${BOARD_NAME} + else + board="$6" + fi + fi + + [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5" + [ $# -gt 6 ] && [ "$8" != "-" ] && { + tmp="${8%:*}" + if [ "$tmp" ] ; then + CONFIG_NAME="$tmp" + fi + } + + # Assign board directory to BOARDIR variable + if [ "${vendor}" == "-" ] ; then + BOARDDIR=${board} + else + BOARDDIR=${vendor}/${board} + fi + + echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}" +} + +get_target_maintainers() { + local name=`echo $1 | cut -d : -f 3` + + local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` + if [ -z "${line}" ]; then + echo "" + return ; + fi + + local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*.*[^>]*$//'` + [ "$mails" == "-" ] && mails="" + echo "$mails" +} + +get_target_arch() { + local target=$1 + + # Automatic mode + local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg` + + if [ -z "${line}" ] ; then echo "" ; return ; fi + + set ${line} + echo "$2" +} + +list_target() { + if [ "$PRINT_MAINTS" != 'y' ] ; then + echo "$1" + return + fi + + echo -n "$1:" + + local loc=`get_target_location $1` + + if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi + + local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"` + + if [ "$MAINTAINERS_ONLY" != 'y' ] ; then + + local dir=`echo ${loc} | cut -d ":" -f 2` + local cfg=`echo ${loc} | cut -d ":" -f 1` + local git_result=`git log --format=%aE board/${dir} \ + include/configs/${cfg}.h | grep "@"` + local git_result_recent=`echo ${git_result} | tr " " "\n" | \ + head -n 3` + local git_result_top=`echo ${git_result} | tr " " "\n" | \ + sort | uniq -c | sort -nr | head -n 3 | \ + sed "s/^ \+[0-9]\+ \+//"` + + echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \ + sort -u | tr "\n" " " | sed "s/ $//" ; + else + echo -e "$maintainers_result" | sort -u | tr "\n" " " | \ + sed "s/ $//" ; + fi + + echo "" +} + +# Each finished build will have a file called ${donep}${n}, +# where n is the index of the build. Each build +# we've already noted as finished will have ${skipp}${n}. +# The code managing the build process will use this information +# to ensure that only BUILD_NBUILDS builds are in flight at once +donep="${LOG_DIR}/._done_" +skipp="${LOG_DIR}/._skip_" + +build_target_killed() { + echo "Aborted $target build." + # Remove the logs for this board since it was aborted + rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR + exit +} + +build_target() { + target=$1 + build_idx=$2 + + if [ "$ONLY_LIST" == 'y' ] ; then + list_target ${target} + return + fi + + if [ $BUILD_MANY == 1 ] ; then + output_dir="${OUTPUT_PREFIX}/${target}" + mkdir -p "${output_dir}" + trap build_target_killed TERM + else + output_dir="${OUTPUT_PREFIX}" + fi + + target_arch=$(get_target_arch ${target}) + eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'` + if [ "${cross_toolchain}" ] ; then + MAKE="make CROSS_COMPILE=${cross_toolchain}" + elif [ "${CROSS_COMPILE}" ] ; then + MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" + else + MAKE=make + fi + + if [ "${output_dir}" != "." ] ; then + MAKE="${MAKE} O=${output_dir}" + fi + + ${MAKE} distclean >/dev/null + ${MAKE} -s ${target}_config + + ${MAKE} ${JOBS} ${CHECK} all \ + >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR + + # Check for 'make' errors + if [ ${PIPESTATUS[0]} -ne 0 ] ; then + RC=1 + fi + + if [ $BUILD_MANY == 1 ] ; then + trap - TERM + + ${MAKE} -s clean + + if [ -s ${LOG_DIR}/${target}.ERR ] ; then + cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target} + else + rm ${LOG_DIR}/${target}.ERR + fi + else + if [ -s ${LOG_DIR}/${target}.ERR ] ; then + if grep -iw error ${LOG_DIR}/${target}.ERR ; then + : $(( ERR_CNT += 1 )) + ERR_LIST="${ERR_LIST} $target" + else + : $(( WRN_CNT += 1 )) + WRN_LIST="${WRN_LIST} $target" + fi + else + rm ${LOG_DIR}/${target}.ERR + fi + fi + + OBJS=${output_dir}/u-boot + if [ -e ${output_dir}/spl/u-boot-spl ]; then + OBJS="${OBJS} ${output_dir}/spl/u-boot-spl" + fi + + ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG + + [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR" + + touch "${donep}${build_idx}" +} + +manage_builds() { + search_idx=${OLDEST_IDX} + if [ "$ONLY_LIST" == 'y' ] ; then return ; fi + + while true; do + if [ -e "${donep}${search_idx}" ] ; then + : $(( CURRENT_CNT-- )) + [ ${OLDEST_IDX} -eq ${search_idx} ] && + : $(( OLDEST_IDX++ )) + + # Only want to count it once + rm -f "${donep}${search_idx}" + touch "${skipp}${search_idx}" + elif [ -e "${skipp}${search_idx}" ] ; then + [ ${OLDEST_IDX} -eq ${search_idx} ] && + : $(( OLDEST_IDX++ )) + fi + : $(( search_idx++ )) + if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then + if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then + search_idx=${OLDEST_IDX} + sleep 1 + else + break + fi + fi + done +} + +build_targets() { + for t in "$@" ; do + # If a LIST_xxx var exists, use it. But avoid variable + # expansion in the eval when a board name contains certain + # characters that the shell interprets. + case ${t} in + *[-+=]*) list= ;; + *) list=$(eval echo '${LIST_'$t'}') ;; + esac + if [ -n "${list}" ] ; then + build_targets ${list} + else + : $((TOTAL_CNT += 1)) + : $((CURRENT_CNT += 1)) + rm -f "${donep}${TOTAL_CNT}" + rm -f "${skipp}${TOTAL_CNT}" + if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then + : $((SKIP_CNT += 1)) + touch "${donep}${TOTAL_CNT}" + elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then + : $((SKIP_CNT += 1)) + touch "${donep}${TOTAL_CNT}" + else + if [ $BUILD_MANY == 1 ] ; then + build_target ${t} ${TOTAL_CNT} & + else + CUR_TGT="${t}" + build_target ${t} ${TOTAL_CNT} + CUR_TGT='' + fi + fi + fi + + # We maintain a running count of all the builds we have done. + # Each finished build will have a file called ${donep}${n}, + # where n is the index of the build. Each build + # we've already noted as finished will have ${skipp}${n}. + # We track the current index via TOTAL_CNT, and the oldest + # index. When we exceed the maximum number of parallel builds, + # We look from oldest to current for builds that have completed, + # and update the current count and oldest index as appropriate. + # If we've gone through the entire list, wait a second, and + # reprocess the entire list until we find a build that has + # completed + if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then + manage_builds + fi + done +} + +#----------------------------------------------------------------------- + +kill_children() { + local OS=$(uname -s) + local children="" + case "${OS}" in + "Darwin") + # Mac OS X is known to have BSD style ps + local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d") + children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d") + ;; + *) + # everything else tries the GNU style + local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ') + children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d") + ;; + esac + + kill $children 2> /dev/null + wait $children 2> /dev/null + + exit +} + +print_stats() { + if [ "$ONLY_LIST" == 'y' ] ; then return ; fi + + # Only count boards that completed + : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`)) + + rm -f ${donep}* ${skipp}* + + if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then + ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/` + ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done` + ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'` + WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/` + WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done` + WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'` + else + # Remove the logs for any board that was interrupted + rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR + fi + + : $((TOTAL_CNT -= ${SKIP_CNT})) + echo "" + echo "--------------------- SUMMARY ----------------------------" + if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then + echo "Boards skipped: ${SKIP_CNT}" + fi + echo "Boards compiled: ${TOTAL_CNT}" + if [ ${ERR_CNT} -gt 0 ] ; then + echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )" + fi + if [ ${WRN_CNT} -gt 0 ] ; then + echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )" + fi + echo "----------------------------------------------------------" + + if [ $BUILD_MANY == 1 ] ; then + kill_children + fi + + exit $RC +} + +#----------------------------------------------------------------------- + +# Build target groups selected by options, plus any command line args +set -- ${SELECTED} "$@" +# run PowerPC by default +[ $# = 0 ] && set -- powerpc +build_targets "$@" +wait -- cgit 1.2.3-korg