From e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Fri, 28 Aug 2015 09:58:54 +0800 Subject: Add qemu 2.4.0 Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang --- qemu/roms/SLOF/board-js2x/Makefile | 81 + qemu/roms/SLOF/board-js2x/Makefile.dirs | 41 + qemu/roms/SLOF/board-js2x/config | 13 + qemu/roms/SLOF/board-js2x/include/bmc.h | 29 + qemu/roms/SLOF/board-js2x/include/hw.h | 27 + qemu/roms/SLOF/board-js2x/include/nvramlog.h | 65 + qemu/roms/SLOF/board-js2x/include/product.h | 31 + qemu/roms/SLOF/board-js2x/include/southbridge.h | 28 + qemu/roms/SLOF/board-js2x/llfw/Cboot.S | 18 + qemu/roms/SLOF/board-js2x/llfw/Makefile | 61 + qemu/roms/SLOF/board-js2x/llfw/board_io.S | 62 + qemu/roms/SLOF/board-js2x/llfw/hw.c | 124 + qemu/roms/SLOF/board-js2x/llfw/stage2.c | 276 ++ qemu/roms/SLOF/board-js2x/llfw/stage2.h | 23 + qemu/roms/SLOF/board-js2x/llfw/stage2.lds | 56 + qemu/roms/SLOF/board-js2x/llfw/stage2_head.S | 91 + qemu/roms/SLOF/board-js2x/llfw/stage_s.S | 43 + qemu/roms/SLOF/board-js2x/llfw/stage_s.lds | 22 + qemu/roms/SLOF/board-js2x/llfw/startup.S | 708 ++++ qemu/roms/SLOF/board-js2x/llfw/u4mem.c | 4065 ++++++++++++++++++++ qemu/roms/SLOF/board-js2x/romfs/boot_rom.ffs | 22 + qemu/roms/SLOF/board-js2x/rtas/Makefile | 89 + qemu/roms/SLOF/board-js2x/rtas/i2c_bmc.oco | Bin 0 -> 22608 bytes qemu/roms/SLOF/board-js2x/rtas/ipmi_oem.oco | Bin 0 -> 5432 bytes qemu/roms/SLOF/board-js2x/rtas/rtas_board.c | 218 ++ qemu/roms/SLOF/board-js2x/rtas/rtas_board.h | 45 + qemu/roms/SLOF/board-js2x/rtas/rtas_flash.c | 614 +++ qemu/roms/SLOF/board-js2x/rtas/rtas_flash.h | 20 + qemu/roms/SLOF/board-js2x/rtas/rtas_i2c_bmc.h | 27 + qemu/roms/SLOF/board-js2x/rtas/rtas_ipmi_bmc.h | 21 + qemu/roms/SLOF/board-js2x/rtas/rtas_out.c | 120 + qemu/roms/SLOF/board-js2x/rtas/rtas_pci.c | 116 + qemu/roms/SLOF/board-js2x/rtas/rtas_table.c | 45 + qemu/roms/SLOF/board-js2x/slof/Makefile | 111 + qemu/roms/SLOF/board-js2x/slof/OF.fs | 557 +++ qemu/roms/SLOF/board-js2x/slof/attu.fs | 101 + qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs | 75 + qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs | 79 + qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs | 36 + qemu/roms/SLOF/board-js2x/slof/citrine.fs | 245 ++ qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs | 16 + qemu/roms/SLOF/board-js2x/slof/cpu.fs | 44 + qemu/roms/SLOF/board-js2x/slof/dart.fs | 31 + qemu/roms/SLOF/board-js2x/slof/flash.fs | 43 + qemu/roms/SLOF/board-js2x/slof/freq.fs | 39 + qemu/roms/SLOF/board-js2x/slof/header.fs | 19 + qemu/roms/SLOF/board-js2x/slof/helper.fs | 28 + qemu/roms/SLOF/board-js2x/slof/ht.fs | 189 + qemu/roms/SLOF/board-js2x/slof/i2c.fs | 77 + qemu/roms/SLOF/board-js2x/slof/io.fs | 26 + qemu/roms/SLOF/board-js2x/slof/ioapic.fs | 36 + qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs | 57 + qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs | 98 + qemu/roms/SLOF/board-js2x/slof/memory.fs | 52 + qemu/roms/SLOF/board-js2x/slof/mpic.fs | 31 + qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs | 85 + .../SLOF/board-js2x/slof/pci-bridge_1022_7460.fs | 203 + qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs | 23 + qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs | 55 + .../SLOF/board-js2x/slof/pci-device_1002_515e.fs | 501 +++ .../SLOF/board-js2x/slof/pci-device_1014_028c.fs | 25 + .../SLOF/board-js2x/slof/pci-device_1014_02bd.fs | 23 + .../SLOF/board-js2x/slof/pci-device_1022_7451.fs | 34 + .../SLOF/board-js2x/slof/pci-device_1022_7468.fs | 50 + .../SLOF/board-js2x/slof/pci-device_1022_7469.fs | 23 + .../SLOF/board-js2x/slof/pci-device_14e4_16a8.fs | 23 + qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs | 235 ++ qemu/roms/SLOF/board-js2x/slof/rtas.fs | 240 ++ qemu/roms/SLOF/board-js2x/slof/rtc.fs | 59 + qemu/roms/SLOF/board-js2x/slof/serial.fs | 48 + qemu/roms/SLOF/board-js2x/slof/sio.fs | 85 + qemu/roms/SLOF/board-js2x/slof/tpm.fs | 63 + qemu/roms/SLOF/board-js2x/slof/tree.fs | 225 ++ qemu/roms/SLOF/board-js2x/slof/u4-mem.fs | 313 ++ qemu/roms/SLOF/board-js2x/slof/version.c | 0 qemu/roms/SLOF/board-js2x/slof/vga-display.fs | 157 + 76 files changed, 11661 insertions(+) create mode 100644 qemu/roms/SLOF/board-js2x/Makefile create mode 100644 qemu/roms/SLOF/board-js2x/Makefile.dirs create mode 100644 qemu/roms/SLOF/board-js2x/config create mode 100644 qemu/roms/SLOF/board-js2x/include/bmc.h create mode 100644 qemu/roms/SLOF/board-js2x/include/hw.h create mode 100644 qemu/roms/SLOF/board-js2x/include/nvramlog.h create mode 100644 qemu/roms/SLOF/board-js2x/include/product.h create mode 100644 qemu/roms/SLOF/board-js2x/include/southbridge.h create mode 100644 qemu/roms/SLOF/board-js2x/llfw/Cboot.S create mode 100644 qemu/roms/SLOF/board-js2x/llfw/Makefile create mode 100644 qemu/roms/SLOF/board-js2x/llfw/board_io.S create mode 100644 qemu/roms/SLOF/board-js2x/llfw/hw.c create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage2.c create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage2.h create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage2.lds create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage2_head.S create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage_s.S create mode 100644 qemu/roms/SLOF/board-js2x/llfw/stage_s.lds create mode 100644 qemu/roms/SLOF/board-js2x/llfw/startup.S create mode 100644 qemu/roms/SLOF/board-js2x/llfw/u4mem.c create mode 100644 qemu/roms/SLOF/board-js2x/romfs/boot_rom.ffs create mode 100644 qemu/roms/SLOF/board-js2x/rtas/Makefile create mode 100644 qemu/roms/SLOF/board-js2x/rtas/i2c_bmc.oco create mode 100644 qemu/roms/SLOF/board-js2x/rtas/ipmi_oem.oco create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_board.c create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_board.h create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_flash.c create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_flash.h create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_i2c_bmc.h create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_ipmi_bmc.h create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_out.c create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_pci.c create mode 100644 qemu/roms/SLOF/board-js2x/rtas/rtas_table.c create mode 100644 qemu/roms/SLOF/board-js2x/slof/Makefile create mode 100644 qemu/roms/SLOF/board-js2x/slof/OF.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/attu.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/citrine.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/cpu.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/dart.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/flash.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/freq.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/header.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/helper.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/ht.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/i2c.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/io.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/ioapic.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/memory.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/mpic.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/rtas.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/rtc.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/serial.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/sio.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/tpm.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/tree.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/u4-mem.fs create mode 100644 qemu/roms/SLOF/board-js2x/slof/version.c create mode 100644 qemu/roms/SLOF/board-js2x/slof/vga-display.fs (limited to 'qemu/roms/SLOF/board-js2x') diff --git a/qemu/roms/SLOF/board-js2x/Makefile b/qemu/roms/SLOF/board-js2x/Makefile new file mode 100644 index 000000000..f24a5046e --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/Makefile @@ -0,0 +1,81 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2008 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ + +BOARD_TARGETS = tools_build romfs_build clients_build stage1 subdirs + +SUBDIRS = slof rtas +COMMON_LIBS = libc libipmi libbootmsg libbases libnvram libelf libusb libbcm + +all: $(BOARD_TARGETS) + $(MAKE) boot_rom.bin + +.PHONY : subdirs $(SUBDIRS) clean distclean + +include config +include Makefile.dirs +include $(TOPCMNDIR)/make.rules +include $(TOPCMNDIR)/Makefile.gen + +subdirs: $(SUBDIRS) + +$(SUBDIRS): common-libs + @echo " ====== Building $@ ======" + $(MAKE) -C $@ $(MAKEARG) + +stage1: common-libs + @echo " ====== Building llfw ======" + $(MAKE) -C llfw RELEASE=-DRELEASE=\"\\\"$(RELEASE)\\\"\" + +clean_here: + rm -f ../slof/OF.ffs + rm -f ../boot_rom.bin + +clean: clean_here clean_gen + @for dir in $(SUBDIRS); do \ + $(MAKE) -C $$dir clean || exit 1; \ + done + rm -f ../boot_rom.bin ../js2*.img + @$(MAKE) -C llfw clean + @$(MAKE) -C $(TOPCMNDIR)/clients/takeover clean + +distclean: clean_here distclean_gen + @for dir in $(SUBDIRS); do \ + $(MAKE) -C $$dir distclean || exit 1; \ + done + rm -f ../boot_rom.bin ../js2*.img + $(MAKE) -C llfw clean + $(MAKE) -C $(TOPCMNDIR)/clients/takeover distclean + +takeover: all + $(MAKE) -C $(TOPCMNDIR)/clients/takeover + +.driver_dirs: + @rm -rf ../driver-$(RELEASE) + @mkdir -p ../driver-$(RELEASE) + +.tar_gz: .driver_dirs takeover external_flasher + @mv ../boot_rom.bin \ + ../driver-$(RELEASE)/$(RELEASE)-js2x.bin + @mv ../boot_rom-$(FLASH_SIZE_MB)MB-BigEndian.bin \ + ../driver-$(RELEASE)/$(RELEASE)-$(FLASH_SIZE_MB)MB-BigEndian.bin + @mv $(TOPCMNDIR)/clients/takeover/takeover.elf \ + ../driver-$(RELEASE)/$(RELEASE)-takeover.bin + @cp ../VERSION ../driver-$(RELEASE) + @cp changes.txt ../driver-$(RELEASE) + @cd ../driver-$(RELEASE) && md5sum * > md5sum.txt + @chmod 644 ../driver-$(RELEASE)/* + @mv ../driver-$(RELEASE) ../driver-$(RELEASE)-`date +%Y-%h%d` + @tar czf ../driver-$(RELEASE)-`date +%Y-%h%d`.tar.gz \ + ../driver-$(RELEASE)-`date +%Y-%h%d` > /dev/null 2>&1 + @rm -rf ../driver-$(RELEASE)-`date +%Y-%h%d` + +driver: driver_prep clean .tar_gz diff --git a/qemu/roms/SLOF/board-js2x/Makefile.dirs b/qemu/roms/SLOF/board-js2x/Makefile.dirs new file mode 100644 index 000000000..1493d3bf1 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/Makefile.dirs @@ -0,0 +1,41 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2008 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ +# +# This sub-Makefile contains the directory configuration variables. +# It can be included from all board specific subdirectories. +# + +# The board specific top directory: +export TOPBRDDIR ?= $(shell while ! test -e Makefile.dirs ; do cd .. ; done ; pwd ) + +# The board specific directories: +export INCLBRDDIR ?= $(TOPBRDDIR)/include +export LLFWBRDDIR ?= $(TOPBRDDIR)/llfw +export RTASBRDDIR ?= $(TOPBRDDIR)/rtas +export SLOFBRDDIR ?= $(TOPBRDDIR)/slof +export ROMFSBRDDIR ?= $(TOPBRDDIR)/romfs + +# The common top directory: +export TOPCMNDIR ?= $(shell cd $(TOPBRDDIR)/.. && pwd) + +# The common directories: +export INCLCMNDIR ?= $(TOPCMNDIR)/include +export LLFWCMNDIR ?= $(TOPCMNDIR)/llfw +export RTASCMNDIR ?= $(TOPCMNDIR)/rtas +export SLOFCMNDIR ?= $(TOPCMNDIR)/slof +export ROMFSCMNDIR ?= $(TOPCMNDIR)/romfs + +export LIBCMNDIR ?= $(TOPCMNDIR)/lib + +export TOOLSDIR ?= $(TOPCMNDIR)/tools +export CLIENTSDIR ?= $(TOPCMNDIR)/clients +export OTHERLICENCEDIR ?= $(TOPCMNDIR)/other-licence diff --git a/qemu/roms/SLOF/board-js2x/config b/qemu/roms/SLOF/board-js2x/config new file mode 100644 index 000000000..d6891e101 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/config @@ -0,0 +1,13 @@ +BOARD=js2x +TARG=ppc64 +export FLAG="-DBIOSEMU" +export CPUARCH=ppc970 +export CPUARCHDEF=-DCPU_PPC970 + +ifneq ($(wildcard ../other-licence/x86emu/*.c),) +export SNK_BIOSEMU_APPS=1 +else +export SNK_BIOSEMU_APPS=0 +endif + +FLASH_SIZE=8388608 diff --git a/qemu/roms/SLOF/board-js2x/include/bmc.h b/qemu/roms/SLOF/board-js2x/include/bmc.h new file mode 100644 index 000000000..39dff80b2 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/include/bmc.h @@ -0,0 +1,29 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef __BMC_H +#define __BMC_H + +void (*bmc_system_reboot) (void); +void (*bmc_power_off) (void); + +short (*bmc_set_flashside) (short mode); +short (*bmc_get_flashside) (void); +int (*bmc_stop_bootwatchdog) (void); +int (*bmc_set_bootwatchdog) (unsigned short); + +uint32_t(*bmc_read_vpd) (uint8_t * dst, uint32_t len, uint32_t offset); +uint32_t(*bmc_write_vpd) (uint8_t * src, uint32_t len, uint32_t offset); + +uint32_t(*bmc_get_blade_descr) (uint8_t * dst, uint32_t maxlen, uint32_t * len); + +#endif /* __BMC_H */ diff --git a/qemu/roms/SLOF/board-js2x/include/hw.h b/qemu/roms/SLOF/board-js2x/include/hw.h new file mode 100644 index 000000000..27117c3f3 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/include/hw.h @@ -0,0 +1,27 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +uint16_t bswap16_load(uint64_t addr) ; +uint32_t bswap32_load(uint64_t addr) ; + +void bswap16_store(uint64_t addr, uint16_t val) ; +void bswap32_store(uint64_t addr, uint32_t val) ; + +uint8_t load8_ci(uint64_t addr) ; +uint16_t load16_ci(uint64_t addr) ; +uint32_t load32_ci(uint64_t addr) ; +uint64_t load64_ci(uint64_t addr) ; + +void store8_ci(uint64_t addr, uint8_t val) ; +void store16_ci(uint64_t addr, uint16_t val) ; +void store32_ci(uint64_t addr, uint32_t val) ; +void store64_ci(uint64_t addr, uint64_t val) ; diff --git a/qemu/roms/SLOF/board-js2x/include/nvramlog.h b/qemu/roms/SLOF/board-js2x/include/nvramlog.h new file mode 100644 index 000000000..5d6c5d1c9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/include/nvramlog.h @@ -0,0 +1,65 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef NVRAMLOG_H + #define NVRAMLOG_H + +/* ---------------------------------------------------------------------------- + * NVRAM Log-Partition header design: + * + * Partition Header + * 00h - signature ( 1 byte) + * 01h - checksum ( 1 byte) + * 02h - length ( 2 byte) value = 1st_byte*256 + 2nd_byte + * 04h - name (12 byte) + * space for partiton header = 16 byte + * + * Log Header + * 10h - offset ( 2 byte) from Partition Header to Data Section + * 12h - flags ( 2 byte) control flags + * 14h - pointer ( 4 byte) pointer to first free byte in Data Section + * relative to the beginning of the data section + * 18h - zero ( 32 byte) reserved as stack for four 64 bit register + * 38h - reserved ( 8 byte) reserved for 64 bit CRC (not implemented yet) + * space for header = 64 byte + * Data Section + * 40h - cyclic data + * -------------------------------------------------------------------------------- */ + + // initial values + #define LLFW_LOG_BE0_SIGNATURE 0x51 // signature for general firmware usage + #define LLFW_LOG_BE0_NAME_PREFIX 0x69626D2C // first 4 bytes of name: "ibm," + #define LLFW_LOG_BE0_NAME 0x435055306C6F6700 // remaining 8 bytes : "CPU0log\0" + #define LLFW_LOG_BE0_LENGTH 0x2000 // Partition length in block of 16 bytes + #define LLFW_LOG_BE0_DATA_OFFSET 0x40 // offset in bytes between header and data + #define LLFW_LOG_BE0_FLAGS 0 // unused + + #define LLFW_LOG_BE1_SIGNATURE 0x51 // signature for general firmware usage + #define LLFW_LOG_BE1_NAME_PREFIX 0x69626D2C // first 4 bytes of name: "ibm," + #define LLFW_LOG_BE1_NAME 0x435055316C6F6700 // remaining 8 bytes : "CPU1log\0\0" + #define LLFW_LOG_BE1_LENGTH 0x500 // Partition length in block of 16 bytes + #define LLFW_LOG_BE1_DATA_OFFSET 0x40 // offset in bytes between header and data + #define LLFW_LOG_BE1_FLAGS 0x0 // unused + + // positions of the initial values + #define LLFW_LOG_POS_CHECKSUM 0x01 // 1 + #define LLFW_LOG_POS_LENGTH 0x02 // 2 + #define LLFW_LOG_POS_NAME 0x04 // 4 + #define LLFW_LOG_POS_DATA_OFFSET 0x10 // 16 + #define LLFW_LOG_POS_FLAGS 0x12 // 18 + #define LLFW_LOG_POS_POINTER 0x14 // 20 + + // NVRAM info + #define MAMBO_NVRAM_BASE 0x100000 // NVRAM Base for MAMBO + #define NVRAM_EMPTY_PATTERN 0x0000000000000000 // Pattern (64-bit) used to overwrite NVRAM + +#endif diff --git a/qemu/roms/SLOF/board-js2x/include/product.h b/qemu/roms/SLOF/board-js2x/include/product.h new file mode 100644 index 000000000..55e9132f8 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/include/product.h @@ -0,0 +1,31 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef _PRODUCT_H +#define _PRODUCT_H + +/* This is also the name which is also put in the flash and should + * therefore not excedd the length of 32 bytes */ +#define PRODUCT_NAME "JS2XBlade" + +/* Generic identifier used in the flash */ +#define FLASHFS_MAGIC "magic123" + +/* Magic identifying the platform */ +#define FLASHFS_PLATFORM_MAGIC "JS2XBlade" + +/* also used in the flash */ +#define FLASHFS_PLATFORM_REVISION "1" + +#define BOOT_MESSAGE "Press \"s\" to enter Open Firmware.\r\n\r\n\0" + +#endif diff --git a/qemu/roms/SLOF/board-js2x/include/southbridge.h b/qemu/roms/SLOF/board-js2x/include/southbridge.h new file mode 100644 index 000000000..1edeb6d76 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/include/southbridge.h @@ -0,0 +1,28 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef _SOUTHBRIDGE_H +#define _SOUTHBRIDGE_H + + +#define SB_FLASH_adr (0xff000000) // FLASH (EBC_CS0/Bank0) +#define SB_NVRAM_adr (0xff800000) // NonVolatile mapping +#define SB_NVRAM_FWONLY_adr (0xff8FF000) // NonVolatile mapping +#define NVRAM_LENGTH 0x100000 +#define NVRAM_FWONLY_LENGTH 0x1000 +#define SB_MAILBOX_adr 0 + +#define FLASH_LENGTH 0x400000 + +#define SB_IPMI_KCS_adr 0xF4000CA8 // IPMI KCS + +#endif diff --git a/qemu/roms/SLOF/board-js2x/llfw/Cboot.S b/qemu/roms/SLOF/board-js2x/llfw/Cboot.S new file mode 100644 index 000000000..d22f3c934 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/Cboot.S @@ -0,0 +1,18 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + + .org 0 + + /* Boot Information, hardcoded to ColdReset */ + .quad 1 + /* start address */ + .quad 0x100 diff --git a/qemu/roms/SLOF/board-js2x/llfw/Makefile b/qemu/roms/SLOF/board-js2x/llfw/Makefile new file mode 100644 index 000000000..41cdc35c8 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/Makefile @@ -0,0 +1,61 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2008 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ + +include ../../make.rules + +CPPFLAGS = -I$(INCLBRDDIR) -I$(INCLCMNDIR) -I$(INCLCMNDIR)/$(CPUARCH) \ + -I$(LIBCMNDIR)/libc/include +CFLAGS += -fno-builtin $(CPPFLAGS) -O2 -msoft-float $(MAMBO) +CFLAGS += $(BOOT) $(IOCONF) -Wa,-mregnames $(RELEASE) $(CPUARCHDEF) -Wall +ASFLAGS = $(BOOT) $(IOCONF) $(RELEASE)$(CPUARCHDEF) -Wa,-mregnames +LDFLAGS1 = -nostdlib -e__start -Tstage2.lds -N -Ttext=0x100 + + +STG1OBJ = startup.o boot_abort.o romfs.o hw.o io_generic.o board_io.o +STG1OBJ += stage2_head.o stage2.o comlib.o romfs_wrap.o nvramlog.o +STG1OBJ += u4mem.o + +all: stage1.bin stageS.bin Cboot.o + +stage1.bin: $(STG1OBJ) $(LIBCMNDIR)/libelf.a $(LIBCMNDIR)/libc.a + $(LD) $(LDFLAGS1) -o stage1.elf $^ + $(OBJCOPY) -O binary stage1.elf $@ + +stageS.bin: stage_s.o + $(LD) -nostdlib -N -Tstage_s.lds -o stage_s.elf stage_s.o + $(OBJCOPY) -O binary stage_s.elf stageS.bin + +romfs.o: ../../llfw/romfs.S + $(CC) $(CFLAGS) -c ../../llfw/romfs.S + +boot_abort.o: ../../llfw/boot_abort.S + $(CC) $(CFLAGS) -c ../../llfw/boot_abort.S + +nvramlog.o: ../../llfw/nvramlog.S + $(CC) $(CFLAGS) -c ../../llfw/nvramlog.S + +include $(LLFWCMNDIR)/clib/Makefile.inc + +include $(LLFWCMNDIR)/io_generic/Makefile.inc + +romfs_wrap.o: ../../llfw/romfs_wrap.c + $(CC) $(CFLAGS) -c ../../llfw/romfs_wrap.c + +Cboot.o: Cboot.S + $(CC) $(CFLAGS) -c $^ + $(OBJCOPY) -O binary Cboot.o Cboot.bin + +%.o: %.S + $(CC) $(CFLAGS) -c $^ + +clean: + rm -f *.o *.bin *.elf diff --git a/qemu/roms/SLOF/board-js2x/llfw/board_io.S b/qemu/roms/SLOF/board-js2x/llfw/board_io.S new file mode 100644 index 000000000..2f365883d --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/board_io.S @@ -0,0 +1,62 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include + + .text + +C_ENTRY(copy_from_flash) +# size in GPR3 (multiple of 64), from GPR4, to GPR5 + mflr 24 ; mtctr 3 ; addi 4,4,-64 ; addi 5,5,-64 +0: SETCI(r0) + ldu 16,64(4) ; ld 17,8(4) ; ld 18,16(4) ; ld 19,24(4) + ld 20,32(4) ; ld 21,40(4) ; ld 22,48(4) ; ld 23,56(4) + CLRCI(r0) + stdu 16,64(5) ; std 17,8(5) ; std 18,16(5) ; std 19,24(5) + std 20,32(5) ; std 21,40(5) ; std 22,48(5) ; std 23,56(5) + sync ; icbi 0,2 ; bdnz 0b ; sync ; isync ; mtlr 24 ; blr + +/**************************************************************************** + * prints one character to serial console + * + * Input: + * R3 - character + * + * Returns: - + * + * Modifies Registers: + * R3, R4, R5, R6, R7 + ****************************************************************************/ +ENTRY(io_putchar) + mflr r7 + + SETCI(r0) + + # always use serial1 + li 4,0x3f8 ; oris 4,4,0xf400 + + # print one char +0: lbz 0,5(4) ; andi. 0,0,0x20 ; beq 0b ; stb 3,0(4) ; eieio + + # also print char to serial2 if on a JS21 + # read ID register: only if it is a PC87427 (JS21) also use serial2 + addi 4,4,-0x3f8 + li 5,0x20 ; stb 5,0x2e(4) ; lbz 5,0x2f(4) ; cmpdi 5,0xf2 ; bne 1f + + addi 4,4,0x2f8 +0: lbz 0,5(4) ; andi. 0,0,0x20 ; beq 0b ; stb 3,0(4) ; eieio + +1: CLRCI(r0) + + mtlr r7 + blr diff --git a/qemu/roms/SLOF/board-js2x/llfw/hw.c b/qemu/roms/SLOF/board-js2x/llfw/hw.c new file mode 100644 index 000000000..e01b583b1 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/hw.c @@ -0,0 +1,124 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include + +uint16_t +bswap16_load(uint64_t addr) +{ + unsigned int val; + set_ci(); + asm volatile ("lhbrx %0, 0, %1":"=r" (val):"r"(addr)); + clr_ci(); + return val; +} + +uint32_t +bswap32_load(uint64_t addr) +{ + unsigned int val; + set_ci(); + asm volatile ("lwbrx %0, 0, %1":"=r" (val):"r"(addr)); + clr_ci(); + return val; +} + +void +bswap16_store(uint64_t addr, uint16_t val) +{ + set_ci(); + asm volatile ("sthbrx %0, 0, %1"::"r" (val), "r"(addr)); + clr_ci(); +} + +void +bswap32_store(uint64_t addr, uint32_t val) +{ + set_ci(); + asm volatile ("stwbrx %0, 0, %1"::"r" (val), "r"(addr)); + clr_ci(); +} + +uint8_t +load8_ci(uint64_t addr) +{ + uint8_t val; + set_ci(); + val = *(uint8_t *) addr; + clr_ci(); + return val; +} + +uint16_t +load16_ci(uint64_t addr) +{ + uint16_t val; + set_ci(); + val = *(uint16_t *) addr; + clr_ci(); + return val; +} + +uint32_t +load32_ci(uint64_t addr) +{ + uint32_t val; + set_ci(); + val = *(uint32_t *) addr; + clr_ci(); + return val; +} + +uint64_t +load64_ci(uint64_t addr) +{ + uint64_t val; + set_ci(); + val = *(uint64_t *) addr; + clr_ci(); + return val; +} + + +void +store8_ci(uint64_t addr, uint8_t val) +{ + set_ci(); + *(uint8_t *) addr = val; + clr_ci(); +} + +void +store16_ci(uint64_t addr, uint16_t val) +{ + set_ci(); + *(uint16_t *) addr = val; + clr_ci(); +} + +void +store32_ci(uint64_t addr, uint32_t val) +{ + set_ci(); + *(uint32_t *) addr = val; + clr_ci(); +} + +void +store64_ci(uint64_t addr, uint64_t val) +{ + set_ci(); + *(uint64_t *) addr = val; + clr_ci(); +} diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage2.c b/qemu/roms/SLOF/board-js2x/llfw/stage2.c new file mode 100644 index 000000000..d05a49493 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage2.c @@ -0,0 +1,276 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include "memmap.h" +#include "stage2.h" +#include +#include "product.h" +#include "calculatecrc.h" +#include +#include +#include + +uint64_t uart; +uint64_t gVecNum; +uint8_t u4Flag; + +uint64_t exception_stack_frame; + +typedef void (*pInterruptFunc_t) (void); + +pInterruptFunc_t vectorTable[0x2E << 1]; + +extern void proceedInterrupt(void); + +/* Prototypes for functions in this file: */ +void c_interrupt(uint64_t vecNum); +void set_exceptionVector(int num, void *func); +int io_getchar(char *ch); +void early_c_entry(uint64_t start_addr); + + +static void +exception_forward(void) +{ + uint64_t val; + + if (*(uint64_t *) XVECT_M_HANDLER) { + proceedInterrupt(); + } + + printf("\r\n exception %llx ", gVecNum); + asm volatile ("mfsrr0 %0":"=r" (val):); + printf("\r\nSRR0 = %08llx%08llx ", val >> 32, val); + asm volatile ("mfsrr1 %0":"=r" (val):); + printf(" SRR1 = %08llx%08llx ", val >> 32, val); + + asm volatile ("mfsprg %0,2":"=r" (val):); + printf("\r\nSPRG2 = %08llx%08llx ", val >> 32, val); + asm volatile ("mfsprg %0,3":"=r" (val):); + printf(" SPRG3 = %08llx%08llx \r\n", val >> 32, val); + while (1); +} + +void +c_interrupt(uint64_t vecNum) +{ + gVecNum = vecNum; + if (vectorTable[vecNum >> 7]) { + vectorTable[vecNum >> 7] (); + } else { + exception_forward(); + } +} + +void +set_exceptionVector(int num, void *func) +{ + vectorTable[num >> 7] = (pInterruptFunc_t) func; +} + +static void +io_init(void) +{ + // read ID register: only if it is a PC87427, enable serial2 + store8_ci(0xf400002e, 0x20); + if (load8_ci(0xf400002f) != 0xf2) { + uart = 0xf40003f8; + u4Flag = 0; + } else { + uart = 0xf40002f8; + u4Flag = 1; + } +} + +int +io_getchar(char *ch) +{ + int retVal = 0; + if ((load8_ci(uart + 5) & 0x01)) { + *ch = load8_ci(uart); + retVal = 1; + } + return retVal; +} + + +void copy_from_flash(uint64_t cnt, uint64_t src, uint64_t dest); + +const uint32_t CrcTableHigh[16] = { + 0x00000000, 0x4C11DB70, 0x9823B6E0, 0xD4326D90, + 0x34867077, 0x7897AB07, 0xACA5C697, 0xE0B41DE7, + 0x690CE0EE, 0x251D3B9E, 0xF12F560E, 0xBD3E8D7E, + 0x5D8A9099, 0x119B4BE9, 0xC5A92679, 0x89B8FD09 +}; +const uint32_t CrcTableLow[16] = { + 0x00000000, 0x04C11DB7, 0x09823B6E, 0x0D4326D9, + 0x130476DC, 0x17C56B6B, 0x1A864DB2, 0x1E475005, + 0x2608EDB8, 0x22C9F00F, 0x2F8AD6D6, 0x2B4BCB61, + 0x350C9B64, 0x31CD86D3, 0x3C8EA00A, 0x384FBDBD +}; + +static unsigned long +check_flash_image(unsigned long rombase, unsigned long length, + unsigned long start_crc) +{ + + uint32_t AccumCRC = start_crc; + char val; + uint32_t Temp; + while (length-- > 0) { + val = load8_ci(rombase++); + Temp = ((AccumCRC >> 24) ^ val) & 0x000000ff; + AccumCRC <<= 8; + AccumCRC ^= CrcTableHigh[Temp / 16]; + AccumCRC ^= CrcTableLow[Temp % 16]; + } + + return AccumCRC; +} + +static void +load_file(uint64_t destAddr, char *name, uint64_t maxSize, uint64_t romfs_base) +{ + uint64_t *src, *dest, cnt; + struct romfs_lookup_t fileInfo; + c_romfs_lookup(name, romfs_base, &fileInfo); + if (maxSize) { + cnt = maxSize / 8; + } else { + cnt = (fileInfo.size_data + 7) / 8; + } + dest = (uint64_t *) destAddr; + src = (uint64_t *) fileInfo.addr_data; + while (cnt--) { + store64_ci((uint64_t) dest, *src); + dest++; + src++; + } + flush_cache((void *) destAddr, fileInfo.size_data); +} + +/*************************************************************************** + * Function: early_c_entry + * Input : start_addr + * + * Description: + **************************************************************************/ +void +early_c_entry(uint64_t start_addr) +{ + struct romfs_lookup_t fileInfo; + uint32_t crc; + void (*ofw_start) (uint64_t, uint64_t, uint64_t, uint64_t, uint64_t); + uint64_t *boot_info; + exception_stack_frame = 0; + /* destination for the flash image; we copy it to RAM + * because from flash it is much too slow + * the flash is copied at 224MB - 4MB (max flash size) + * at 224MB starts SLOF + * at 256MB is the SLOF load-base */ + uint64_t romfs_base = 0xe000000 - 0x400000; + // romfs header values + struct stH *header = (struct stH *) (start_addr + 0x28); + //since we cannot read the fh_magic directly from flash as a string, we need to copy it to memory + uint64_t magic_val = 0; + uint64_t startVal = 0; + uint64_t flashlen = 0; + unsigned long ofw_addr; + + io_init(); + + flashlen = load64_ci((uint64_t) (&header->flashlen)); + + //copy fh_magic to magic_val since, we cannot use it as a string from flash + magic_val = load64_ci((uint64_t) (header->magic)); + + printf(" Check ROM = "); + if (strncmp((char *) &magic_val, FLASHFS_MAGIC, 8) == 0) { + // somehow, the first 8 bytes in flashfs are overwritten, if booting from drone... + // so if we find "IMG1" in the first 4 bytes, we skip the CRC check... + startVal = load64_ci((uint64_t) start_addr); + if (strncmp((char *) &startVal, "IMG1", 4) == 0) { + printf + ("start from RAM detected, skipping CRC check!\r\n"); + // for romfs accesses (c_romfs_lookup) to work, we must fix the first uint64_t to the value we expect... + store64_ci((uint64_t) start_addr, 0xd8); + } else { + //checking CRC in flash, we must use cache_inhibit + // since the crc is included as the last 32 bits in the image, the resulting crc should be 0 + crc = + check_flash_image((uint64_t) start_addr, + load64_ci((uint64_t) + (&header->flashlen)), + 0); + if (crc == 0) { + printf("OK\r\n"); + } else { + printf("failed!\r\n"); + while (1); + } + } + } else { + printf + ("failed (magic string is \"%.8s\" should be \"%.8s\")\r\n", + (char *) &magic_val, FLASHFS_MAGIC); + while (1); + } + + printf(" Press \"s\" to enter Open Firmware.\r\n\r\n"); + + if ((start_addr > 0xF0000000) && u4Flag) + u4memInit(); + + /* here we have real ram avail -> hopefully + * copy flash to ram; size is in 64 byte blocks */ + flashlen /= 64; + /* align it a bit */ + flashlen += 7; + flashlen &= ~7; + copy_from_flash(flashlen, start_addr, romfs_base); + /* takeover sometimes fails if the image running on the system + * has a different size; flushing the cache helps, because it is + * the right thing to do anyway */ + flush_cache((void *) romfs_base, flashlen * 64); + + c_romfs_lookup("bootinfo", romfs_base, &fileInfo); + boot_info = (uint64_t *) fileInfo.addr_data; + boot_info[1] = start_addr; + load_file(0x100, "xvect", 0, romfs_base); + load_file(SLAVELOOP_LOADBASE, "stageS", 0, romfs_base); + c_romfs_lookup("ofw_main", romfs_base, &fileInfo); + + elf_load_file((void *) fileInfo.addr_data, &ofw_addr, + NULL, flush_cache); + ofw_start = + (void (*)(uint64_t, uint64_t, uint64_t, uint64_t, uint64_t)) + &ofw_addr; + // re-enable the cursor + printf("%s%s", TERM_CTRL_RESET, TERM_CTRL_CRSON); + /* ePAPR 0.5 + * r3 = R3 Effective address of the device tree image. Note: this + * address must be 8-byte aligned in memory. + * r4 = implementation dependent + * r5 = 0 + * r6 = 0x65504150 -- ePAPR magic value-to distinguish from + * non-ePAPR-compliant firmware + * r7 = implementation dependent + */ + asm volatile("isync; sync;" : : : "memory"); + ofw_start(0, romfs_base, 0, 0, 0); + // never return +} diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage2.h b/qemu/roms/SLOF/board-js2x/llfw/stage2.h new file mode 100644 index 000000000..9ce3c8203 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage2.h @@ -0,0 +1,23 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef __STAGE2_H +#define __STAGE2_H + +#ifndef __ASSEMBLER__ + +#include + +void u4memInit(void); + +#endif /* __ASSEMBLER__ */ +#endif /* __STAGE2_H */ diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage2.lds b/qemu/roms/SLOF/board-js2x/llfw/stage2.lds new file mode 100644 index 000000000..f91f0658a --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage2.lds @@ -0,0 +1,56 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc", "elf64-powerpc") +OUTPUT_ARCH(powerpc:common64) + +/* set the entry point */ +ENTRY ( __start ) + +SECTIONS { + .text : { + *(.text) + } + + . = ALIGN(8); + + .data : { + *(.data) + *(.rodata .rodata.*) + *(.got1) + *(.sdata) + *(.opd) + } + + /* FIXME bss at end ??? */ + + . = ALIGN(8); + __bss_start = .; + .bss : { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + } + + . = ALIGN(8); + __bss_end = .; + __bss_size = (__bss_end - __bss_start); + + __toc_start = .; + .got : + { + *(.toc .got) + } + . = ALIGN(8); + __toc_end = .; + __stack_end = . ; +} diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage2_head.S b/qemu/roms/SLOF/board-js2x/llfw/stage2_head.S new file mode 100644 index 000000000..5460bfebb --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage2_head.S @@ -0,0 +1,91 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include "macros.h" +#include "../../llfw/boot_abort.h" + +/*#################### defines #####################*/ +#define STACK_SIZE 0x4000 + +/*#################### code ########################*/ + .text + .globl .gluon_c_entry + .globl __toc_start + .globl __toc_end + .globl __stack_end + .globl __bss_start + .globl __bss_size + .globl __start + +ASM_ENTRY(__startC) + /* clear out bss section */ + LOAD64(r3, (__bss_start - 8)) + LOAD64(r4, __bss_size) + + /* divide __bss_size by 8 to get number */ + /* of dwords to clear */ + srwi. r4, r4, 3 + beq bsscdone + li r5, 0 + mtctr r4 +bssc: stdu r5, 8(r3) + bdnz bssc +bsscdone: + /* setup stack */ + LOAD64(r1, __stack_end + STACK_SIZE) + + /* save return address beside stack */ + addi r3, r1, 128 + mflr r0 + std r0, 0(r3) + + /* setup toc */ + bl toc_init + + /* ------------------------------------ */ + /* jump to c-code */ + /* r10 = cpu_init_slave address - r3 */ + /* r11 = slave_setup address - r4 */ + /* ------------------------------------ */ + mr r3, r10 + mr r4, r11 + bl .early_c_entry + + /* return to caller... */ + LOAD64(r1, __stack_end + STACK_SIZE) + addi r1, r1, 128 + ld r3, 0(r1) + mtlr r3 + blr + + /* #################################### */ + /* Basic Additional Functions */ + /* for extended lib functions see */ + /* external library */ + /* #################################### */ + .align 2 + + /* ------------------------------------ */ + /* updates toc in r2 */ + /* ------------------------------------ */ +ASM_ENTRY(toc_init) + LOAD64(r2, __toc_start) + addi r2,r2,0x4000 + addi r2,r2,0x4000 + blr + + /* ------------------------------------ */ + /* stores arg#1 in r27 and stops */ + /* ------------------------------------ */ +ENTRY(do_panic) +ENTRY(halt_sys) + BOOT_ABORT_R3HINT(ABORT_CANIO, ALTBOOT, msg_e_ierror); diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage_s.S b/qemu/roms/SLOF/board-js2x/llfw/stage_s.S new file mode 100644 index 000000000..202350f67 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage_s.S @@ -0,0 +1,43 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + .text + .org 0 /* after loading to mem this is at slaveloop_base */ +# . = 0x3f00 loaded to this addr + .globl __stage_s_entry + +__stage_s_entry: + bl $+4 + mflr r4 + li r3, 0xff + not r3, r3 + and r4, r4, r3 + li 0,1 ; std 0,0xf8(4) + li 0,0 ; std 0,0xa0(4) +slaveloop: + ori 28,28,0x100 + lis 0,10 + mtctr 0 + bdnz $ # do some waiting, to prevent flooding the buses + lwz 0,0xa0(4) + cmpw 0,28 + bne $-20 # wait for our flag + + lwz 0,0x80(4) + lwz 3,0xc0(4) + mtctr 0 + bctr # jump to specified address, with specified GPR3 + +# .quad 0 +# .quad 0 + + + diff --git a/qemu/roms/SLOF/board-js2x/llfw/stage_s.lds b/qemu/roms/SLOF/board-js2x/llfw/stage_s.lds new file mode 100644 index 000000000..200c1b33e --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/stage_s.lds @@ -0,0 +1,22 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc", "elf64-powerpc") +OUTPUT_ARCH(powerpc:common64) + +ENTRY( __stage_s_entry ) + +SECTIONS { + .text : { + *(.text) + } +} diff --git a/qemu/roms/SLOF/board-js2x/llfw/startup.S b/qemu/roms/SLOF/board-js2x/llfw/startup.S new file mode 100644 index 000000000..1357d3fd7 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/startup.S @@ -0,0 +1,708 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +# SLOF for JS20/JS21 -- ROM boot code. +# Initial entry point, copy code from flash to cache, memory setup. +# Also sets up serial console and optimizes some settings. + +#include "termctrl.h" +#include +#include +#include +#include +#include + + .text + .globl __start +__start: + /* put rombase in sprg1 ***********************/ + + bl postHeader + .long 0xDEADBEE0 + .long 0x0 /* size */ + .long 0x0 /* crc */ + .long relTag - __start +postHeader: + mflr r3 + li r4, 0x7fff + not r4, r4 + and r3, r3, r4 + mtsprg 1, r3 /* romfs base */ + bl _start + + .org 0x150 - 0x100 +__startSlave: + bl setup_cpu + bl set_ci_bit +# b slaveWithNumber + b slave + + .org 0x180 - 0x100 +__startMaster: + li 3,0 + mtsprg 1, r3 /* romfs base */ + bl setup_cpu + bl set_ci_bit + b master + + + /* FIXME: Also need 0280, 0380, 0f20, etc. */ + + .irp i, 0x0100,0x0180,0x0200,0x0280,0x0300,0x0380,0x0400,0x0500,0x0600,0x0700, \ + 0x0800,0x0900,0x0a00,0x0b00,0x0c00,0x0d00,0x0e00,0x0f00, \ + 0x1000,0x1100,0x1200,0x1300,0x1400,0x1500,0x1600,0x1700, \ + 0x1800,0x1900,0x1a00,0x1b00,0x1c00,0x1d00,0x1e00,0x1f00, \ + 0x2000,0x2100,0x2200,0x2300,0x2400,0x2500,0x2600,0x2700, \ + 0x2800,0x2900,0x2a00,0x2b00,0x2c00,0x2d00,0x2e00 + . = \i + + /* enable this if you get exceptions before the console works */ + /* this will allow using the hardware debugger to see where */ + /* it traps, and with what register values etc. */ + // b $ + + mtsprg 0, r0 + mfctr r0 + mtsprg 2,r0 + mflr r0 +// 10 + mtsprg 3,r0 + ld r0, (\i + 0x160)(0) + mtctr r0 + li r0, \i + 0x100 +// 20 + bctr + + . = \i + 0x60 + + .quad intHandler2C + + .endr + + + . = XVECT_M_HANDLER - 0x100 + .quad 0x00 + . = XVECT_S_HANDLER - 0x100 + + .quad 0 + + + + .org 0x4000 - 0x100 +_start: + # optimize HID register settings + bl setup_cpu + bl set_ci_bit + + # read semaphore, run as slave if not the first to do so + li 3,0 ; oris 3,3,0xf800 ; lwz 3,0x60(3) ; andi. 3,3,1 ; beq slave +master: + # setup flash, serial + bl setup_sio + + # early greet + li r3, 10 + bl putc + li 3,13 ; bl putc ; li 3,10 ; bl putc ; li 3,'S' ; bl putc + + + #do we run from ram ? + mfsprg r3, 1 /* rombase */ + cmpdi r3,0 /* rombase is 0 when running from RAM */ + + bne copy_to_cache + + # wait a bit, start scripts are slow... need to get all cores running! + lis 3,0x4000 ; mtctr 3 ; bdnz $ + + # copy 4MB from 0 to temp memory + lis 4,0x8 ; mtctr 4 ; lis 4,0x200 ; li 3,0 ; addi 4,4,-8 ; addi 3,3,-8 +0: ldu 5,8(3) ; stdu 5,8(4) ; bdnz 0b + + lis 4,0x200 + mtsprg 1, r4 + + lis 4,0x1 + lis 3,0x20 ; addi 3,3,0x200-8 ; + FLUSH_CACHE(r3, r4) + + lis 4,0x200 + addi 4,4,copy_to_cache@l + mtctr 4 + bctr + +# make all data accesses cache-inhibited +set_ci_bit: + SETCI(r0) + blr + +# make all data accesses cacheable +clr_ci_bit: + CLRCI(r0) + blr + +# write a character to the serial port +putc: +# always write to serial1 +0: lbz 0,5(13) ; andi. 0,0,0x20 ; beq 0b ; stb 3,0(13) ; eieio + +# read ID register: only if it is a PC87427 (JS21) also use serial2 + li 4,0 ; oris 4,4,0xf400 + li 5,0x20 ; stb 5,0x2e(4) ; lbz 5,0x2f(4); cmpdi 5,0xf2 ; bne 1f + + addi 4,4,0x2f8 +0: lbz 0,5(4) ; andi. 0,0,0x20 ; beq 0b ; stb 3,0(4) ; eieio + +1: blr + +# transfer from running from flash to running from cache +return_cacheable: + # find and set address to start running from cache, set msr value + mflr 3 ; rldicl 3,3,0,44 +jump_cacheable: + mtsrr0 3 ; + mfmsr 3 ; ori 3,3,0x1000 ; mtsrr1 3 # enable MCE, as well + + # set cacheable insn fetches, jump to cache + mfspr 3,HID1 ; rldicl 3,3,32,0 ; oris 3,3,0x0020 ; rldicl 3,3,32,0 + sync ; mtspr HID1,3 ; mtspr HID1,3 ; rfid ; b . + + + + +copy_to_cache: + # zero the whole cache + # also, invalidate the insn cache, to clear parity errors + # 128kB @ 0MB (boot code and vectors from 0x0 up to 0x20000) + li 4,0x400 ; mtctr 4 ; li 5,0x0 ; bl clr_ci_bit +0: dcbz 0,5 ; sync ; icbi 0,5 ; sync ; isync ; addi 5,5,0x80 ; bdnz 0b + + # 0x2000 to 0x100000/0x80000 (smaller on 970/970FX) + li 4,0x1C00 ; mfpvr 0 ; srdi 0,0,16 ; cmpdi 0,0x0044 ; bge 0f ; li 4,0xC00 +0: + mtctr 4 ; li 5,0x2000 +0: dcbz 0,5 ; sync ; isync ; addi 5,5,0x80 ; bdnz 0b ; bl set_ci_bit + + # find base address + bcl 20,31,$+4 ; mflr 31 ; rldicr 31,31,0,43 + + # copy 1kB from 0x4000 + li 4,0x80 ; mtctr 4 ; + li 5,0x3ff8 + addi 3,31,0x3ff8 +0: ldu 4,8(3) ; bl clr_ci_bit ; stdu 4,8(5) ; bl set_ci_bit ; bdnz 0b + # now start executing from cache -- insn cache is huge speed boost + + bl return_cacheable + + li 3,'L' ; bl putc + + # copy 128kB of flash to cache + li 4,0x800 ; mtctr 4 ; li 5,0x200-64 ; addi 3,31,0x200-64 ; +0: ldu 16,64(3) ; ld 17,8(3) ; ld 18,16(3) ; ld 19,24(3) + ld 20,32(3) ; ld 21,40(3) ; ld 22,48(3) ; ld 23,56(3) + bl clr_ci_bit + stdu 16,64(5) ; std 17,8(5) ; std 18,16(5) ; std 19,24(5) + std 20,32(5) ; std 21,40(5) ; std 22,48(5) ; std 23,56(5) + icbi 0,5 ; bl set_ci_bit ; bdnz 0b ; isync + + + li 3,'O' ; bl putc + + lis 4,0x20 + mfsprg r3,1 + cmpd r3,r4 + beq 1f + + // at 0xf8000000 we decide if it is u3 or u4 + li 4,0 ; oris 4,4,0xf800 ; lwz 3,0(4) ; srdi 3,3,4 ; cmpdi 3,3 ; bne 0f + bl setup_mem_u3 + bl setup_mem_size + b 1f +0: + +1: + li 3,'F' ; bl putc + + # setup nvram logging only when not running from RAM + mfsprg r3, 1 /* rombase */ + cmpdi r3, 0 /* rombase is 0 when running from RAM */ + beq 0f + + // at 0xf8000000 we decide if it is u3 or u4 + li r4, 0 + oris r4, r4, 0xf800 + lwz r3, 0(r4) + srdi r3, r3, 4 + cmpdi r3, 3 /* 3 means js20; no nvram logging on js20 */ + beq 0f + + bl io_log_init +0: + + #bl print_mem + + # data is cacheable by default from now on + bl clr_ci_bit + + + /* give live sign *****************************/ + bl 0f + .ascii TERM_CTRL_RESET + .ascii TERM_CTRL_CRSOFF + .ascii " **********************************************************************" + .ascii "\r\n" + .ascii TERM_CTRL_BRIGHT + .ascii PRODUCT_NAME + .ascii " Starting\r\n" + .ascii TERM_CTRL_RESET + .ascii " Build Date = ", __DATE__, " ", __TIME__ + .ascii "\r\n" + .ascii " FW Version = " , RELEASE + .ascii "\r\n\0" + .align 2 +0: mflr r3 + bl io_print + + # go! + li r3,__startC@l + mtctr r3 + mfsprg r10, 1 + bctrl + +relTag: + .ascii RELEASE + .ascii "\0" + .align 2 + +slave: + + # get cpu number + li 3,0 ; oris 3,3,0xf800 ; lwz 28,0x50(3) + +slaveWithNumber: + # create our slave loop address + sldi 3,28,24 ; oris 3,3,0x3000 + + # invalidate the insn cache, to clear parity errors + # clear the L2 cache as well, to get ECC right + li 4,0x2000 ; mfpvr 0 ; srdi 0,0,16 ; cmpdi 0,0x0044 ; bge 0f ; li 4,0x1000 +0: mtctr 4 ; mr 5,3 ; bl clr_ci_bit + +0: dcbz 0,5 ; sync ; icbi 0,5 ; sync ; isync ; addi 5,5,0x80 ; bdnz 0b + + + # write a "b $" insn in there + lis 4,0x4800 ; stw 4,0(3) +/* + mr 5,3 + + # jump there + bl set_ci_bit + li 13,0 ; oris 13,13,0xf400 + # device address + addi 13,13,0x2f8 + li 3,'O' ; add 3,3,28 ; bl putc + bl clr_ci_bit + mr 3,5 +*/ + b jump_cacheable + + + + +# allow the flash chip to be accessed faster +# initialize the 16550-compatible uart on serial port 1 of the sio +setup_sio: + + # i/o base address + li 3,0 ; oris 3,3,0xf400 + + # i/o base address + li 3,0 ; oris 3,3,0xf400 + + # put x-bus in turbo mode + li 4,0xf1 ; stb 4,0x400(3) ; eieio + + + # select sio serial1 + li 4,7 ; stb 4,0x2e(3) ; eieio ; li 4,3 ; stb 4,0x2f(3) ; eieio + + # set base address to 3f8 + li 4,0x60 ; stb 4,0x2e(3) ; eieio ; li 4,3 ; stb 4,0x2f(3) ; eieio + + # enable device + li 4,0x30 ; stb 4,0x2e(3) ; eieio ; li 4,1 ; stb 4,0x2f(3) ; eieio + + # read ID register: only if it is a PC87427, enable serial2 + li 4,0x20 ; stb 4,0x2e(3) ; eieio ; lbz 4,0x2f(3) ; cmpdi 4,0xf2 ; bne 0f + + # select sio serial2 + li 4,7 ; stb 4,0x2e(3) ; eieio ; li 4,2 ; stb 4,0x2f(3) ; eieio + + # set base address to 2f8 + li 4,0x60 ; stb 4,0x2e(3) ; eieio ; li 4,2 ; stb 4,0x2f(3) ; eieio + + # enable device + li 4,0x30 ; stb 4,0x2e(3) ; eieio ; li 4,1 ; stb 4,0x2f(3) ; eieio + + # uart @0x2f8 + addi 3,3,0x2f8 + + # disable interrupts, fifo off + li 4,0 ; stb 4,1(3) ; eieio ; stb 4,2(3) ; eieio + + # set serial speed + li 4,0x80 ; stb 4,3(3) ; eieio + li 4,115200/19200 ; stb 4,0(3) ; eieio ; li 4,0 ; stb 4,1(3) ; eieio + + # set 8-N-1, set RTS and DTR + li 4,3 ; stb 4,3(3) ; eieio ; stb 4,4(3) ; eieio + + eieio + + addi 3,3,-0x2f8 + + # uart @0x3f8 +0: addi 3,3,0x3f8 + + # disable interrupts, fifo off + li 4,0 ; stb 4,1(3) ; eieio ; stb 4,2(3) ; eieio + + # set serial speed + li 4,0x80 ; stb 4,3(3) ; eieio + li 4,115200/19200 ; stb 4,0(3) ; eieio ; li 4,0 ; stb 4,1(3) ; eieio + + # set 8-N-1, set RTS and DTR + li 4,3 ; stb 4,3(3) ; eieio ; stb 4,4(3) ; eieio + + eieio + + # save UART base for putc routine +0: mr 13,3 + + blr + + + + +# set the HID registers of the 970 for optimally executing from flash +setup_cpu: + + /* clear all the HV cruft */ + li r0, 0 + sync + mtspr HID4, r0 + isync + + /* enable dpm, disable attn insn, enable external mce + * first, try external time base; if clock doesn't run, switch to + * internal */ + li r0, 1 /* do the setup for external timebase */ + rldicl r0, r0, 44, 0 /* bit 19 has to be set */ + oris r0, r0, 0x8000 /* Enable external machine check */ + /* interrupts (preferred state */ + /* equals `1'). */ + sync + mtspr HID0, r0 + isync + + mftb r3 /* read the timebase */ + li r1, 0x4000 /* wait long enough for the external */ + mtctr r1 /* timebase (14MHz) to tick a bit */ + bdnz $ /* 0x4000 seems to be enough (for now) */ + mftb r4 /* read the timebase a second time */ + cmpld r3, r4 /* see if it changed */ + bne 0f + /* timebase did not change, do the setup for internal */ + rldicl r0, r0, 19, 1 + rldicl r0, r0, 45, 0 + sync + mtspr HID0, r0 + isync + +0: + /* enable insn prefetch, speculative table walks */ + mfspr r0, HID1 + rldicl r0, r0, 20, 0 + ori r0, r0, 0x1002 + mfsprg r3, 1 /* read rombase */ + cmpdi r3, 0 /* check if running from ram */ + bne 0f + /* running from ram */ + /* Enable instruction fetch cacheability control */ + ori r0, r0, 0x200 +0: + rldicl r0, r0, 44, 0 + sync + mtspr HID1, r0 + isync + + /* enable cache parity */ + mfspr r0, HID4 + oris r0, r0, 0xfff0 + xoris r0, r0, 0xfff0 + sync + mtspr HID4, r0 + isync + + /* exception offset at 0 */ + li r3, 0 + mtspr HIOR, r3 + + blr + +C_ENTRY(proceedInterrupt) + + ld r3,exception_stack_frame@got(r2) + ld r1,0(r3) + + .irp i, 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16, \ + 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, \ + 27, 28, 29, 30, 31 + ld r\i, 0x30+\i*8 (r1) + .endr + + ld r14,0x138(r1); + mtsrr0 r14 + + ld r14,0x140(r1); + mtsrr1 r14 + + ld r14,0x148(r1); + mtcr r14 + + + ld 0,XVECT_M_HANDLER(0) + mtctr 0 + + ld r0,0x30(r1); # restore vector number + ld r1,0x38(r1); + + bctr + +intHandler2C: + mtctr r1 # save old stack pointer + lis r1,0x4 + stdu r1, -0x160(r1) + .irp i, 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16, \ + 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, \ + 27, 28, 29, 30, 31 + std r\i, 0x30+\i*8 (r1) + .endr + + std r0,0x30(r1); # save vector number + + mfctr r14 + std r14,0x38(r1); # save old r1 + + mfsrr0 r14 + std r14,0x138(r1); + + mfsrr1 r14 + std r14,0x140(r1); + + mfcr r14 + std r14,0x148(r1); + + mfxer r14 + std r14,0x150(r1); + + bl toc_init + + ld r3,exception_stack_frame@got(r2) + std r1,0(r3) + + + mr r3,r0 + bl .c_interrupt + + ld r14,0x138(r1); + mtsrr0 r14 + + ld r14,0x140(r1); + mtsrr1 r14 + + ld r14,0x148(r1); + mtcr r14 + + ld r14,0x150(r1); + mtxer r14 + + + .irp i, 2,3,4,5,6,7,8,9,10,11,12,13,14,15,16, \ + 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, \ + 27, 28, 29, 30, 31 + ld r\i, 0x30+\i*8 (r1) + .endr + + ld r1,0x38(r1); + + mfsprg r0,2 + mtctr r0 + mfsprg r0,3 + mtlr r0 + mfsprg r0,0 + rfid + +/* Set exception handler for given exception vector. + r3: exception vector offset + r4: exception handler +*/ + .globl .set_exception +.set_exception: + .globl set_exception +set_exception: + ld r4,0x0(r4) + .globl .set_exception_asm +.set_exception_asm: + .globl set_exception_asm +set_exception_asm: + std r4, 0x60(r3) # fixme diff 1f - 0b + blr + + +setup_mem_u3: + li 4,0x2000 ; oris 4,4,0xf800 + + # MemTimingParam -- CAS lat 2.5 / 4 (read-to-read / read-to-write) + lis 3,0x49e1 ; ori 3,3,0xa000 ; stw 3,0x50(4) + + # MRSRegCntl -- CAS lat 2.5 + li 3,0x6a ; stw 3,0xf0(4) + + # MemBusConfig -- 128 bit bus + lis 3,0x8500 ; stw 3,0x190(4) + + # CKDelAdj -- clock delay 75 + lis 3,0x12c3 ; ori 3,3,0x30cc ; stw 3,0x520(4) + + # IOModeCntl -- no termination on differential and 3-state drivers + lis 3,0x0350 ; stw 3,0x530(4) + + li 3,18 ; mtctr 3 ; addi 5,4,0x5f0 +0: # DQSDelAdj -- read delay offset -10 + lis 3,0x3d8f ; ori 3,3,0x6000 ; stwu 3,0x10(5) + + # DQSDataDelAdj -- write delay offset -32, write data delay offset +15 + lis 3,0x380e ; ori 3,3,0x003c ; stwu 3,0x10(5) + bdnz 0b + + # MemProgCntl -- set all + lis 3,0xc000 ; stw 3,0xe0(4) + + eieio + + blr + + +# read dimm SPDs, program memory size and type +setup_mem_size: + mflr 14 + + li 15,0 ; oris 15,15,0xf800 ; li 17,0 + li 3,0xa0 ; li 4,3 ; li 5,3 ; bl i2c_read + mr 16,4 ; cmpdi 3,0 ; beq 0f ; li 16,0 +0: li 3,0xa2 ; li 4,3 ; li 5,3 ; bl i2c_read + cmpd 16,4 ; bne 0f ; cmpdi 3,0 ; beq 1f +0: li 16,0x1e00 +1: #li 3,0xd ; bl print_byte ; li 3,0xa ; bl print_byte + #mr 3,16 ; bl print_hex + + #li 3,0x20 ; bl print_byte + sldi 3,16,7 ; add 3,3,16 ; rlwinm 3,3,10,0,6 ; subis 3,3,0x3c00 + stw 3,0x21c0(15) ; andi. 0,16,2 ; beq 0f ; stw 3,0x21e0(15) +0: #bl print_hex + sldi 3,16,8 ; add 3,3,16 ; rldicl 3,3,48,56 ; li 0,8 ; slw 3,0,3 + # slw, not sld, so that empty/bad banks translate into size 0 + stw 17,0x21d0(15) ; bl add17173 ; stw 17,0x21f0(15) + andi. 0,16,2 ; beq 0f ; bl add17173 +0: #bl print_hex + + li 3,0xa4 ; li 4,3 ; li 5,3 ; bl i2c_read + mr 16,4 ; cmpdi 3,0 ; beq 0f ; li 16,0 +0: li 3,0xa6 ; li 4,3 ; li 5,3 ; bl i2c_read + cmpd 16,4 ; bne 0f ; cmpdi 3,0 ; beq 1f +0: li 16,0x1e00 +1: #li 3,0xd ; bl print_byte ; li 3,0xa ; bl print_byte + #mr 3,16 ; bl print_hex + + #li 3,0x20 ; bl print_byte + sldi 3,16,7 ; add 3,3,16 ; rlwinm 3,3,10,0,6 ; subis 3,3,0x3c00 + stw 3,0x2200(15) ; andi. 0,16,2 ; beq 0f ; stw 3,0x2220(15) +0: #bl print_hex + sldi 3,16,8 ; add 3,3,16 ; rldicl 3,3,48,56 ; li 0,8 ; slw 3,0,3 + stw 17,0x2210(15) ; bl add17173 ; stw 17,0x2230(15) + andi. 0,16,2 ; beq 0f ; bl add17173 +0: #bl print_hex + #mr 3,17 ; bl print_hex + stw 17,0x2250(15) ; stw 17,0x2270(15) + stw 17,0x2290(15) ; stw 17,0x22b0(15) + + mtlr 14 + blr + + + + +# print GPR3 as 8-digit hex. uses GPR18,19 +print_hex: + mflr 18 ; mr 19,3 ; li 3,8 ; mtctr 3 +1: rlwinm 3,19,4,28,31 ; sldi 19,19,4 + cmpdi 3,0xa ; blt 0f ; addi 3,3,0x27 +0: addi 3,3,0x30 ; bl putc + bdnz 1b ; mtlr 18 ; blr + + +# i2c stuff uses GPR20..GPR24 + +# terminate any i2c transaction, at any point during that transaction +i2c_stop: +0: lwz 3,0x30(20) ; stw 3,0x30(20) ; andi. 3,3,4 ; beq 0b + mr 3,21 ; mr 4,22 ; mtlr 24 ; eieio ; blr + +# do a combined-mode read +# in: GPR3 = addr, GPR4 = subaddr, GPR5 = len +# out: GPR3 = error, GPR4 = result (right-aligned, msb) +i2c_read: + mflr 24 + li 20,0x1000 ; oris 20,20,0xf800 # uni-n i2c base + mr 21,3 ; mr 22,4 ; mr 23,5 # save params + li 4,0xc ; stw 4,0(20) # set mode (combined) + ori 4,21,1 ; stw 4,0x50(20) # set addr, read + stw 22,0x60(20) # set subaddr + li 4,2 ; stw 4,0x10(20) ; eieio # start address phase + li 21,1 # error + li 22,0 # result accumulator +0: lwz 3,0x30(20) ; andi. 3,3,2 ; beq 0b # wait until sent + lwz 3,0x20(20) ; andi. 3,3,2 ; beq i2c_stop # check result + li 4,1 ; cmpdi 23,1 ; bne 0f ; li 4,0 +0: stw 4,0x10(20) # AAK for next byte (or not) + li 4,2 ; stw 4,0x30(20) ; eieio # ack address phase +i2c_read_loop: + lwz 3,0x30(20) ; andi. 3,3,1 ; beq 1f # if byte recv'd: + subi 23,23,1 ; sldi 22,22,8 # shift byte accum + lwz 3,0x70(20) ; rlwimi 22,3,0,24,31 # get byte + cmpdi 23,0 ; bne 0f ; li 21,0 ; b i2c_stop # all done +0: li 4,1 ; cmpdi 23,1 ; bne 0f ; li 4,0 +0: stw 4,0x10(20) # AAK for next byte (or not) + li 4,1 ; stw 4,0x30(20) ; eieio # ack data phase +1: lwz 3,0x30(20) ; andi. 3,3,4 ; beq i2c_read_loop + li 4,0 ; stw 4,0x10(20) ; eieio ; b i2c_stop # stop bit received + +add17173: # add GPR3 into GPR17; if passing 2GB (0x10000000), add another 2GB. + lis 0,0x1000 ; cmpld 17,0 ; add 17,17,3 ; bgtlr + cmpld 17,0 ; blelr ; add 17,17,0 ; blr + +io_log_init: + LOAD64(r3, SB_NVRAM_adr) + b checkinitLog diff --git a/qemu/roms/SLOF/board-js2x/llfw/u4mem.c b/qemu/roms/SLOF/board-js2x/llfw/u4mem.c new file mode 100644 index 000000000..68bba56df --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/llfw/u4mem.c @@ -0,0 +1,4065 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ +#include +#include +#include +#include "stage2.h" +#include +#include + +/* + * compiler switches + ******************************************************************************* + */ +#define U4_DEBUG +#define U4_INFO +//#define U4_SHOW_REGS + +int io_getchar(char *); + +/* + * version info + */ +static const uint32_t VER = 2; +static const uint32_t SUBVER = 1; + +/* + * local macros + ******************************************************************************* + */ +// bit shifting in Motorola/IBM bit enumeration format (yaks...) +#define IBIT( nr ) ( (uint32_t) 0x80000000 >> (nr) ) +#define BIT( nr ) ( (uint32_t) 0x1 << (nr) ) + +/* + * macros to detect the current board layout + */ +#define IS_MAUI ( ( load8_ci( 0xf4000682 ) >> 4 ) == 0 ) +#define IS_BIMINI ( ( load8_ci( 0xf4000682 ) >> 4 ) == 1 ) +#define IS_KAUAI ( ( load8_ci( 0xf4000682 ) >> 4 ) == 2 ) + +/* + * local constants + ******************************************************************************* + */ + +/* + * u4 base address + */ +#define U4_BASE_ADDR ((uint64_t) 0xf8000000 ) +#define u4reg( reg ) (U4_BASE_ADDR + (uint64_t) (reg)) + +/* + * I2C registers + */ +#define I2C_MODE_R u4reg(0x1000) +#define I2C_CTRL_R u4reg(0x1010) +#define I2C_STAT_R u4reg(0x1020) +#define I2C_ISR_R u4reg(0x1030) +#define I2C_ADDR_R u4reg(0x1050) +#define I2C_SUBA_R u4reg(0x1060) +#define I2C_DATA_R u4reg(0x1070) + +/* + * clock control registers & needed bits/masks + */ +#define ClkCntl_R u4reg(0x0800) +#define PLL2Cntl_R u4reg(0x0860) + +/* + * clock control bits & masks + */ +#define CLK_DDR_CLK_MSK (IBIT(11) | IBIT(12) | IBIT(13)) + +/* + * memory controller registers + */ +#define RASTimer0_R u4reg(0x2030) +#define RASTimer1_R u4reg(0x2040) +#define CASTimer0_R u4reg(0x2050) +#define CASTimer1_R u4reg(0x2060) +#define MemRfshCntl_R u4reg(0x2070) +#define MemProgCntl_R u4reg(0x20b0) +#define Dm0Cnfg_R u4reg(0x2200) +#define Dm1Cnfg_R u4reg(0x2210) +#define Dm2Cnfg_R u4reg(0x2220) +#define Dm3Cnfg_R u4reg(0x2230) +#define MemWrQCnfg_R u4reg(0x2270) +#define MemArbWt_R u4reg(0x2280) +#define UsrCnfg_R u4reg(0x2290) +#define MemRdQCnfg_R u4reg(0x22a0) +#define MemQArb_R u4reg(0x22b0) +#define MemRWArb_R u4reg(0x22c0) +#define MemBusCnfg_R u4reg(0x22d0) +#define MemBusCnfg2_R u4reg(0x22e0) +#define ODTCntl_R u4reg(0x23a0) +#define MemModeCntl_R u4reg(0x2500) +#define MemPhyModeCntl_R u4reg(0x2880) +#define CKDelayL_R u4reg(0x2890) +#define CKDelayU_R u4reg(0x28a0) +#define IOPadCntl_R u4reg(0x29a0) +#define ByteWrClkDelC0B00_R u4reg(0x2800) +#define ByteWrClkDelC0B01_R u4reg(0x2810) +#define ByteWrClkDelC0B02_R u4reg(0x2820) +#define ByteWrClkDelC0B03_R u4reg(0x2830) +#define ByteWrClkDelC0B04_R u4reg(0x2900) +#define ByteWrClkDelC0B05_R u4reg(0x2910) +#define ByteWrClkDelC0B06_R u4reg(0x2920) +#define ByteWrClkDelC0B07_R u4reg(0x2930) +#define ByteWrClkDelC0B16_R u4reg(0x2980) +#define ByteWrClkDelC0B08_R u4reg(0x2a00) +#define ByteWrClkDelC0B09_R u4reg(0x2a10) +#define ByteWrClkDelC0B10_R u4reg(0x2a20) +#define ByteWrClkDelC0B11_R u4reg(0x2a30) +#define ByteWrClkDelC0B12_R u4reg(0x2b00) +#define ByteWrClkDelC0B13_R u4reg(0x2b10) +#define ByteWrClkDelC0B14_R u4reg(0x2b20) +#define ByteWrClkDelC0B15_R u4reg(0x2b30) +#define ByteWrClkDelC0B17_R u4reg(0x2b80) +#define ReadStrobeDelC0B00_R u4reg(0x2840) +#define ReadStrobeDelC0B01_R u4reg(0x2850) +#define ReadStrobeDelC0B02_R u4reg(0x2860) +#define ReadStrobeDelC0B03_R u4reg(0x2870) +#define ReadStrobeDelC0B04_R u4reg(0x2940) +#define ReadStrobeDelC0B05_R u4reg(0x2950) +#define ReadStrobeDelC0B06_R u4reg(0x2960) +#define ReadStrobeDelC0B07_R u4reg(0x2970) +#define ReadStrobeDelC0B16_R u4reg(0x2990) +#define ReadStrobeDelC0B08_R u4reg(0x2a40) +#define ReadStrobeDelC0B09_R u4reg(0x2a50) +#define ReadStrobeDelC0B10_R u4reg(0x2a60) +#define ReadStrobeDelC0B11_R u4reg(0x2a70) +#define ReadStrobeDelC0B12_R u4reg(0x2b40) +#define ReadStrobeDelC0B13_R u4reg(0x2b50) +#define ReadStrobeDelC0B14_R u4reg(0x2b60) +#define ReadStrobeDelC0B15_R u4reg(0x2b70) +#define ReadStrobeDelC0B17_R u4reg(0x2b90) +#define MemInit00_R u4reg(0x2100) +#define MemInit01_R u4reg(0x2110) +#define MemInit02_R u4reg(0x2120) +#define MemInit03_R u4reg(0x2130) +#define MemInit04_R u4reg(0x2140) +#define MemInit05_R u4reg(0x2150) +#define MemInit06_R u4reg(0x2160) +#define MemInit07_R u4reg(0x2170) +#define MemInit08_R u4reg(0x2180) +#define MemInit09_R u4reg(0x2190) +#define MemInit10_R u4reg(0x21a0) +#define MemInit11_R u4reg(0x21b0) +#define MemInit12_R u4reg(0x21c0) +#define MemInit13_R u4reg(0x21d0) +#define MemInit14_R u4reg(0x21e0) +#define MemInit15_R u4reg(0x21f0) +#define CalConf0_R u4reg(0x29b0) +#define CalConf1_R u4reg(0x29c0) +#define MeasStatusC0_R u4reg(0x28f0) +#define MeasStatusC1_R u4reg(0x29f0) +#define MeasStatusC2_R u4reg(0x2af0) +#define MeasStatusC3_R u4reg(0x2bf0) +#define CalC0_R u4reg(0x28e0) +#define CalC1_R u4reg(0x29e0) +#define CalC2_R u4reg(0x2ae0) +#define CalC3_R u4reg(0x2be0) +#define RstLdEnVerniersC0_R u4reg(0x28d0) +#define RstLdEnVerniersC1_R u4reg(0x29d0) +#define RstLdEnVerniersC2_R u4reg(0x2ad0) +#define RstLdEnVerniersC3_R u4reg(0x2bd0) +#define ExtMuxVernier0_R u4reg(0x28b0) +#define ExtMuxVernier1_R u4reg(0x28c0) +#define OCDCalCmd_R u4reg(0x2300) +#define OCDCalCntl_R u4reg(0x2310) +#define MCCR_R u4reg(0x2440) +#define MSRSR_R u4reg(0x2410) +#define MSRER_R u4reg(0x2420) +#define MSPR_R u4reg(0x2430) +#define MSCR_R u4reg(0x2400) +#define MEAR0_R u4reg(0x2460) +#define MEAR1_R u4reg(0x2470) +#define MESR_R u4reg(0x2480) +#define MRSRegCntl_R u4reg(0x20c0) +#define EMRSRegCntl_R u4reg(0x20d0) +#define APIMemRdCfg_R u4reg(0x30090) +#define APIExcp_R u4reg(0x300a0) + +/* + * common return values + */ +#define RET_OK 0 +#define RET_ERR -1 +#define RET_ACERR_CE -1 +#define RET_ACERR_UEWT -2 +#define RET_ACERR_UE -3 + +/* + * 'DIMM slot populated' indicator + */ +#define SL_POP 1 + +/* + * spd buffer size + */ +#define SPD_BUF_SIZE 0x40 + +/* + * maximum number of DIMM banks & DIMM groups + */ +#define NUM_SLOTS 8 +#define NUM_BANKS ( NUM_SLOTS / 2 ) +#define MAX_DGROUPS ( NUM_SLOTS / 2 ) +#define SLOT_ADJ() ( ( IS_MAUI ) ? NUM_SLOTS / 4 : NUM_SLOTS / 2 ) + +/* + * values needed for auto calibration + */ +#define MAX_DRANKS NUM_SLOTS +#define MAX_BLANE 18 +#define MAX_RMD 0xf + +/* + * maximum number of supported CAS latencies + */ +#define NUM_CL 3 + +/* + * min/max supported CL values by U4 + */ +#define U4_MIN_CL 3 +#define U4_MAX_CL 5 + +/* + * DIMM constants + */ +#define DIMM_TYPE_MSK BIT(0) +#define DIMM_ORG_x4 BIT(0) +#define DIMM_ORG_x8 BIT(1) +#define DIMM_ORG_x16 BIT(2) +#define DIMM_ORG_MIXx8x16 BIT(30) +#define DIMM_ORG_UNKNOWN 0 +#define DIMM_WIDTH 72 +#define DIMM_BURSTLEN_4 BIT(2) + +/* + * L2 cache size + */ +#define L2_CACHE_SIZE (uint32_t) 0x100000 + +/* + * scrub types + */ +#define IMMEDIATE_SCRUB IBIT(0) +#define IMMEDIATE_SCRUB_WITH_FILL ( IBIT(0) | IBIT(1) ) +#define BACKGROUND_SCRUB ( IBIT(1) | ( 0x29 << 16 ) ) + +/* + * I2C starting slave addresses of the DIMM banks + */ +#define I2C_START 0x50 + +/* + * Index to the speed dependend DIMM settings + */ +enum +{ + SPEED_IDX_400 = 0, + SPEED_IDX_533, + SPEED_IDX_667, + NUM_SPEED_IDX +}; + +/* + * number of read/write strobes of the U4 + */ +#define NUM_STROBES 18 + +/* + * 2GB hole definition + */ +static const uint64_t _2GB = (uint64_t) 0x80000000; + +/* + * local types + ******************************************************************************* + */ +/* + * DIMM definition + */ +typedef struct +{ + uint32_t m_pop_u32; // set if bank is populated + uint32_t m_bank_u32; // bank number + uint32_t m_clmsk_u32; // mask of supported CAS latencies + uint32_t m_clcnt_u32; // number of supporetd CAS latencies + uint32_t m_clval_pu32[NUM_CL]; // values of supporeted CAS latencies + uint32_t m_speed_pu32[NUM_CL]; // speed (Mhz) at CAS latency of same index + uint32_t m_size_u32; // chip size in Mb + uint32_t m_rank_u32; // # of ranks, total size = chip size*rank + uint32_t m_orgmsk_u32; // data organisation (x4, x8, x16) (mask) + uint32_t m_orgval_u32; // data organisation (value) + uint32_t m_width_u32; // data width + uint32_t m_ecc_u32; // set if ecc + uint32_t m_type_u32; // rdimm or udimm + uint32_t m_burst_u32; // supported burst lengths + uint32_t m_bankcnt_u32; // number of banks + + /* + * the following timing values are all in 1/100ns + */ + uint32_t m_tCK_pu32[NUM_CL]; + uint32_t m_tRAS_u32; + uint32_t m_tRTP_u32; + uint32_t m_tRP_u32; + uint32_t m_tWR_u32; + uint32_t m_tRRD_u32; + uint32_t m_tRC_u32; + uint32_t m_tRCD_u32; + uint32_t m_tWTR_u32; + uint32_t m_tREF_u32; + uint32_t m_tRFC_u32; +} dimm_t; + +/* + * DIMM group definition + */ +typedef struct +{ + uint32_t m_size_u32; // group size in MB + uint32_t m_start_u32; // in 128Mb granularity + uint32_t m_end_u32; // in 128Mb granularity + uint32_t m_ss_u32; // single sided/double sided + uint32_t m_csmode_u32; // selected CS mode for this group + uint32_t m_add2g_u32; + uint32_t m_sub2g_u32; + uint32_t m_memmd_u32; // selected mem mode for this group + uint32_t m_dcnt_u32; // number of DIMMs in group + dimm_t *m_dptr[NUM_SLOTS]; +} dgroup_t; + +/* + * auto calibration result structure + */ +typedef struct +{ + uint32_t m_MemBusCnfg_u32; + uint32_t m_MemBusCnfg2_u32; + uint32_t m_RstLdEnVerniers_pu32[4]; +} auto_calib_t; + +/* + * ECC error structure + */ +typedef struct +{ + int32_t m_err_i32; + uint32_t m_uecnt_u32; // number of uncorrectable errors + uint32_t m_cecnt_u32; // number of correctable errors + uint32_t m_rank_u32; // erroneous rank + uint32_t m_col_u32; // erroneous column + uint32_t m_row_u32; // erroneous row + uint32_t m_bank_u32; // erroneous bank +} eccerror_t; + +/* + * U4 register setup structure + */ +typedef struct +{ + /* + * external MUX delays + */ + uint32_t RRMux; + uint32_t WRMux; + uint32_t WWMux; + uint32_t RWMux; + + /* + * default Wr/Rd Queue & Arbiter register settings + */ + uint32_t MemRdQCnfg; + uint32_t MemWrQCnfg; + uint32_t MemQArb; + uint32_t MemRWArb; + + /* + * misc fixed register values + */ + uint32_t ODTCntl; + uint32_t IOPadCntl; + uint32_t MemPhyModeCntl; + uint32_t OCDCalCntl; + uint32_t OCDCalCmd; + uint32_t CKDelayL; + uint32_t CKDelayU; + uint32_t MemBusCnfg; + uint32_t CAS1Dly0; + uint32_t CAS1Dly1; + uint32_t ByteWrClkDel[NUM_STROBES]; + uint32_t ReadStrobeDel[NUM_STROBES]; +} reg_statics_t; + +/* + * local variables + ******************************************************************************* + */ +static dimm_t m_dimm[NUM_SLOTS]; +static dimm_t m_gendimm; +static uint32_t m_dcnt_u32; +static dimm_t *m_dptr[NUM_SLOTS]; +static uint32_t m_bankoff_u32; +static uint32_t m_bankpop_u32[NUM_BANKS]; +static uint32_t m_dclidx_u32; +static uint32_t m_dgrcnt_u32; +static dgroup_t m_dgroup[MAX_DGROUPS]; +static dgroup_t *m_dgrptr[MAX_DGROUPS]; +static uint64_t m_memsize_u64; // memsize in bytes + +/* + * local functions + ******************************************************************************* + */ +static void +progbar( void ) +{ + static uint8_t bar[] = + { '|', '/', '-', '\\', 0 }; + static uint32_t idx = 0; + + printf( "\b%c", bar[idx] ); + + if( bar[++idx] == 0 ) { + idx = 0; + } + +} + +static void +or32_ci( uint64_t r, uint32_t m ) +{ + uint32_t v; + + v = load32_ci( r ); + v |= m; + store32_ci( r, v ); +} + +static void +and32_ci( uint64_t r, uint32_t m ) +{ + uint32_t v; + + v = load32_ci( r ); + v &= m; + store32_ci( r, v ); +} + +static void +dly( uint64_t volatile f_wait_u64 ) \ +{ + while( f_wait_u64 ) { + f_wait_u64--; + } +} + +/* + * local i2c access functions + */ +static void +i2c_term( void ) +{ + uint32_t l_stat_u32; + + /* + * clear out all pending int's and wait + * for the stop condition to occur + */ + do { + l_stat_u32 = load32_ci( I2C_ISR_R ); + store32_ci( I2C_ISR_R, l_stat_u32 ); + } while( ( l_stat_u32 & IBIT(29) ) == 0 ); + +} + +static int32_t +i2c_read( uint32_t f_addr_u32, uint32_t f_suba_u32, uint8_t *f_buf_pu08, uint32_t f_len_u32 ) +{ + uint32_t l_val_u32; + int32_t l_ret_i32 = 1; + + /* + * parameter check + */ + if( ( f_addr_u32 > (uint32_t) 0x7f ) || + ( f_suba_u32 > (uint32_t) 0xff ) || + ( f_len_u32 == (uint32_t) 0x00 ) ) { + return RET_ERR; + } + + /* + * set I2C Interface to combined mode + */ + store32_ci( I2C_MODE_R, IBIT(28) | IBIT(29) ); + + /* + * set address, subaddress & read mode + */ + store32_ci( I2C_ADDR_R, ( f_addr_u32 << 1 ) | (uint32_t) 0x1 ); + store32_ci( I2C_SUBA_R, f_suba_u32 ); + + /* + * start address transmission phase + */ + store32_ci( I2C_CTRL_R, IBIT(30) ); + + /* + * wait for address transmission to finish + */ + do { + l_val_u32 = load32_ci( I2C_ISR_R ); + } while( ( l_val_u32 & IBIT(30) ) == 0 ); + + /* + * check for success + */ + if( ( load32_ci( I2C_STAT_R ) & IBIT(30) ) == 0 ) { + i2c_term(); + return RET_ERR; + } else { + // send ack + store32_ci( I2C_CTRL_R, IBIT(31) ); + // clear int + store32_ci( I2C_ISR_R, IBIT(30) ); + } + + /* + * read data + */ + while( l_ret_i32 > 0 ) { + l_val_u32 = load32_ci( I2C_ISR_R ); + + if( ( l_val_u32 & IBIT(31) ) != 0 ) { + // data was received + *f_buf_pu08 = ( uint8_t ) load32_ci( I2C_DATA_R ); + + f_buf_pu08++; + f_len_u32--; + + /* + * continue when there is more data to read or + * exit if not + */ + if( f_len_u32 != 0 ) { + // send ack + store32_ci( I2C_CTRL_R, IBIT(31) ); + // clear int + store32_ci( I2C_ISR_R, IBIT(31) ); + } else { + // send nack + store32_ci( I2C_CTRL_R, 0 ); + // set exit flag + l_ret_i32 = RET_OK; + } + + } else if( ( l_val_u32 & IBIT(29) ) != 0 ) { + // early stop condition + // set exit flag + l_ret_i32 = RET_ERR; + } + + }; + + i2c_term(); + + return( l_ret_i32 ); +} + +static uint32_t +i2c_get_slot( uint32_t i2c_addr ) +{ + uint32_t slot; + + slot = ( i2c_addr - I2C_START ) / 2; + + if( ( i2c_addr & 0x1 ) != 0 ) { + slot += SLOT_ADJ(); + } + + return slot; +} + +/* + * 'serial presence detect' interpretation functions + */ +static uint32_t +ddr2_get_dimm_rank( uint8_t *f_spd_pu08 ) +{ + static const int RANK_IDX = (int) 5; + + return (uint32_t) ( f_spd_pu08[RANK_IDX] & 0x3 ) + 1; +} + +static uint32_t +ddr2_get_dimm_size( uint8_t *f_spd_pu08 ) +{ + static const int SIZE_IDX = (int) 31; + uint8_t l_smsk_u08; + uint32_t i; + + l_smsk_u08 = ( f_spd_pu08[SIZE_IDX] << 3 ) | + ( f_spd_pu08[SIZE_IDX] >> 5 ); + + for( i = 0; ( ( l_smsk_u08 & ( (uint8_t) 0x1 << i ) ) == 0 ) ; i++ ); + + return (uint32_t) 0x80 << i; +} + +static uint32_t +ddr2_get_dimm_type( uint8_t *f_spd_pu08 ) +{ + static const int TYPE_IDX = (int) 20; + + return (uint32_t) f_spd_pu08[TYPE_IDX] & DIMM_TYPE_MSK; +} + +static uint32_t +ddr2_get_dimm_org( uint8_t *f_spd_pu08, uint32_t /*out*/ *f_omsk_pu32 ) +{ + static const int ORG_IDX = (int) 13; + uint32_t l_ret_u32 = (uint32_t) f_spd_pu08[ORG_IDX]; + + if( l_ret_u32 == 4 ) { + *f_omsk_pu32 = DIMM_ORG_x4; + } else if( l_ret_u32 == 8 ) { + *f_omsk_pu32 = DIMM_ORG_x8; + *f_omsk_pu32 |= DIMM_ORG_MIXx8x16; + } else if( l_ret_u32 == 16 ) { + *f_omsk_pu32 = DIMM_ORG_x16; + *f_omsk_pu32 |= DIMM_ORG_MIXx8x16; + } else { + *f_omsk_pu32 = DIMM_ORG_UNKNOWN; + l_ret_u32 = (uint32_t) ~0; + } + + return l_ret_u32; +} + +static uint32_t +ddr2_get_dimm_width( uint8_t *f_spd_pu08 ) +{ + static const int WIDTH_IDX = (int) 6; + + return (uint32_t) f_spd_pu08[WIDTH_IDX]; +} + +static uint32_t +ddr2_get_dimm_ecc( uint8_t *f_spd_pu08 ) +{ + static const int ECC_IDX = (int) 11; + + return ( f_spd_pu08[ECC_IDX] & BIT(1) ) != 0; +} + +static uint32_t +ddr2_get_dimm_burstlen( uint8_t *f_spd_pu08 ) +{ + static const int BURST_IDX = (int) 16; + + return (uint32_t) f_spd_pu08[BURST_IDX]; +} + +static void +ddr2_get_dimm_speed( dimm_t *f_dimm, uint8_t *f_spd_pu08 ) +{ + static const int SPEED_IDX[] = { 25, 23, 9 }; + static const uint32_t NS[] = { 25, 33, 66, 75 }; + uint8_t l_tmp_u08; + uint32_t l_dspeed_u32; + uint32_t idx = 0; + uint32_t i; + + for( i = NUM_CL - f_dimm->m_clcnt_u32; i < NUM_CL; i++ ) { + l_tmp_u08 = f_spd_pu08[SPEED_IDX[i]]; + l_dspeed_u32 = (uint32_t) ( l_tmp_u08 >> 4 ) * 100; + l_tmp_u08 &= (uint8_t) 0xf; + + if( l_tmp_u08 >= (uint8_t) 10 ) { + l_dspeed_u32 += NS[l_tmp_u08 - 10]; + } else { + l_dspeed_u32 += (uint32_t) l_tmp_u08 * 10; + } + + f_dimm->m_tCK_pu32[idx] = l_dspeed_u32; + f_dimm->m_speed_pu32[idx] = (uint32_t) 2000000 / l_dspeed_u32; + f_dimm->m_speed_pu32[idx] += (uint32_t) 5; + f_dimm->m_speed_pu32[idx] /= (uint32_t) 10; + idx++; + } + +} + +static void +ddr2_get_dimm_timings( dimm_t *f_dimm, uint8_t *f_spd_pu08 ) +{ + static const uint32_t NS[] = { 00, 25, 33, 50, 66, 75, 00, 00 }; + static const uint32_t USMUL = (uint32_t) 390625; + static const int tREF_IDX = (int) 12; + static const int tRP_IDX = (int) 27; + static const int tRRD_IDX = (int) 28; + static const int tRCD_IDX = (int) 29; + static const int tRAS_IDX = (int) 30; + static const int tWR_IDX = (int) 36; + static const int tWTR_IDX = (int) 37; + static const int tRTP_IDX = (int) 38; + static const int tRC_IDX = (int) 41; // & 40 + static const int tRFC_IDX = (int) 42; // & 40 + + uint32_t l_tmp_u32; + + f_dimm->m_tRP_u32 = (uint32_t) f_spd_pu08[tRP_IDX] * 25; + f_dimm->m_tRRD_u32 = (uint32_t) f_spd_pu08[tRRD_IDX] * 25; + f_dimm->m_tRCD_u32 = (uint32_t) f_spd_pu08[tRCD_IDX] * 25; + f_dimm->m_tWR_u32 = (uint32_t) f_spd_pu08[tWR_IDX] * 25; + f_dimm->m_tWTR_u32 = (uint32_t) f_spd_pu08[tWTR_IDX] * 25; + f_dimm->m_tRTP_u32 = (uint32_t) f_spd_pu08[tRTP_IDX] * 25; + f_dimm->m_tRAS_u32 = (uint32_t) f_spd_pu08[tRAS_IDX] * 100; + + l_tmp_u32 = (uint32_t) ( f_spd_pu08[tRC_IDX - 1] >> 4 ); + l_tmp_u32 &= (uint32_t) 0x7; + f_dimm->m_tRC_u32 = (uint32_t) f_spd_pu08[tRC_IDX] * 100 + + NS[l_tmp_u32]; + + l_tmp_u32 = (uint32_t) f_spd_pu08[tRFC_IDX - 2]; + l_tmp_u32 &= (uint32_t) 0xf; + f_dimm->m_tRFC_u32 = (uint32_t) 256 * ( l_tmp_u32 & (uint32_t) 0x1 ); + f_dimm->m_tRFC_u32 += (uint32_t) f_spd_pu08[tRFC_IDX]; + f_dimm->m_tRFC_u32 *= 100; + l_tmp_u32 >>= 1; + f_dimm->m_tRFC_u32 += NS[l_tmp_u32]; + + l_tmp_u32 = (uint32_t) f_spd_pu08[tREF_IDX]; + l_tmp_u32 &= (uint32_t) 0x7f; + + if( l_tmp_u32 == 0 ) { + l_tmp_u32 = (uint32_t) 2; + } else if( l_tmp_u32 <= (uint32_t) 2 ) { + l_tmp_u32--; + } + + f_dimm->m_tREF_u32 = ( l_tmp_u32 + 1 ) * USMUL; +} + +static uint32_t +ddr2_get_banks( uint8_t *f_spd_pu08 ) +{ + static const int BANK_IDX = (int) 17; + + return (uint32_t) f_spd_pu08[BANK_IDX]; +} + +static uint32_t +ddr2_get_cl_mask( uint8_t *f_spd_pu08 ) +{ + static const int CL_IDX = (int) 18; + + return (uint32_t) f_spd_pu08[CL_IDX]; +} + +static void +ddr2_get_cl( dimm_t *f_dimm ) +{ + uint32_t l_clcnt_u32 = 0; + uint32_t i; + + for( i = 0; ( i < 8 ) && ( l_clcnt_u32 < NUM_CL ) ; i++ ) { + + if( ( f_dimm->m_clmsk_u32 & ( (uint32_t) 0x1 << i ) ) != 0 ) { + f_dimm->m_clval_pu32[l_clcnt_u32] = i; + l_clcnt_u32++; + } + + } + + f_dimm->m_clcnt_u32 = l_clcnt_u32; +} + +static uint32_t +ddr2_cl2speed( dimm_t *f_dimm, uint32_t f_cl_u32, uint32_t *f_tCK_pu32 ) +{ + uint32_t i; + + for(i = 0; (i < NUM_CL) && (f_dimm->m_clval_pu32[i] != f_cl_u32); i++); + + if( i == NUM_CL ) { + return (uint32_t) ~0; + } + + *f_tCK_pu32 = f_dimm->m_tCK_pu32[i]; + + return f_dimm->m_speed_pu32[i]; +} + +static void +ddr2_setupDIMM( dimm_t *f_dimm, uint32_t f_bank_u32, uint8_t *f_spd_pu08 ) +{ + f_dimm->m_pop_u32 = SL_POP; + f_dimm->m_bank_u32 = f_bank_u32; + f_dimm->m_size_u32 = ddr2_get_dimm_size( f_spd_pu08 ); + f_dimm->m_rank_u32 = ddr2_get_dimm_rank( f_spd_pu08 ); + f_dimm->m_type_u32 = ddr2_get_dimm_type( f_spd_pu08 ); + f_dimm->m_orgval_u32 = ddr2_get_dimm_org( f_spd_pu08, &f_dimm->m_orgmsk_u32 ); + f_dimm->m_width_u32 = ddr2_get_dimm_width( f_spd_pu08 ); + f_dimm->m_ecc_u32 = ddr2_get_dimm_ecc( f_spd_pu08 ); + f_dimm->m_burst_u32 = ddr2_get_dimm_burstlen( f_spd_pu08 ); + f_dimm->m_clmsk_u32 = ddr2_get_cl_mask( f_spd_pu08 ); + f_dimm->m_bankcnt_u32 = ddr2_get_banks( f_spd_pu08 ); + + ddr2_get_cl( f_dimm ); + ddr2_get_dimm_speed( f_dimm, f_spd_pu08 ); + ddr2_get_dimm_timings( f_dimm, f_spd_pu08 ); +} + +static int32_t +ddr2_checkSPD( uint8_t *f_spd_pu08 ) +{ + uint8_t crc = 0; + uint32_t i; + + for( i = 0; i < SPD_BUF_SIZE - 1; i++ ) { + crc += f_spd_pu08[i]; + } + + if( crc != f_spd_pu08[i] ) { + return RET_ERR; + } + + return RET_OK; +} + +static int32_t +ddr2_readSPDs( void ) +{ + static const uint32_t MAX_SPD_FAIL = 3; + uint8_t l_spdbuf_pu08[SPD_BUF_SIZE]; + uint32_t l_bankfail_u32 = 0; + uint32_t l_spdfail_u32 = 0; + int32_t l_i2c_i32 = RET_OK; + int32_t l_spd_i32 = RET_OK; + int32_t ret = RET_OK; + uint32_t i; + + /* + * read spd's and detect populated slots + */ + for( i = 0; i < NUM_SLOTS; i++ ) { + /* + * indicate slot as empty + */ + m_dimm[i].m_pop_u32 = 0; + + /* + * check whether bank is switched off + */ + if( ( m_bankoff_u32 & ( 0x1 << ( i / 2 ) ) ) != 0 ) { + continue; + } + + /* + * read SPD data + */ + + /* + * reset SPD fail counter + */ + l_spdfail_u32 = MAX_SPD_FAIL; + l_spd_i32 = RET_OK; + + while( l_spdfail_u32 != 0 ) { + l_i2c_i32 = i2c_read( I2C_START + i, 0x0, l_spdbuf_pu08, SPD_BUF_SIZE ); + + if( l_i2c_i32 == RET_OK ) { + l_spd_i32 = ddr2_checkSPD( l_spdbuf_pu08 ); + + if( l_spd_i32 == RET_OK ) { + l_spdfail_u32 = 0; + } else { + l_spdfail_u32--; + } + + } else { + l_spdfail_u32--; + } + + } + + if( l_spd_i32 != RET_OK ) { + #ifdef U4_INFO + printf( "\r\n [ERROR -> SPD read failure in slot %u]", + i2c_get_slot( I2C_START + i ) ); + #endif + + l_bankfail_u32 |= ( 0x1 << ( i / 2 ) ); + ret = RET_ERR; + } else if( l_i2c_i32 == RET_OK ) { + /* + * slot is populated + */ + ddr2_setupDIMM( &m_dimm[i], i / 2, l_spdbuf_pu08 ); + + m_dptr[m_dcnt_u32] = &m_dimm[i]; + m_dcnt_u32++; + } + + } + + if( ret != RET_OK ) { + m_bankoff_u32 |= l_bankfail_u32; + #ifdef U4_INFO + printf( "\r\n" ); + #endif + } + + return ret; +} + +static int32_t +ddr2_setupDIMMcfg( void ) +{ + uint32_t l_tmp_u32; + uint32_t l_tmp0_u32; + uint32_t l_tmp1_u32; + uint32_t i, j, e, b; + + /* + * check wether on board DIMM slot population is valid + */ + e = 0; + b = 0; + for( i = 0; i < NUM_SLOTS; i += 2 ) { + + switch( m_dimm[i].m_pop_u32 + m_dimm[i+1].m_pop_u32 ) { + case 0: { + m_bankpop_u32[i/2] = 0; + break; + } + + case 2 * SL_POP: { + m_bankpop_u32[i/2] = !0; + b++; + break; + } + + default: { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> only 1 DIMM installed in bank %u]", i/2 ); + #endif + e++; + } + + } + + } + + /* + * return on error + */ + if( e != 0 ) { + #ifdef U4_DEBUG + printf( "\r\n" ); + #endif + return RET_ERR; + } + + if( b == 0 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> no (functional) memory installed]\r\n" ); + #endif + return RET_ERR; + } + + /* + * check DIMM compatibility + * configuration is 128 bit data/128 bit bus + * -all DIMMs must be organized as x4 + * -all DIMMs must be 72 bit wide with ECC + * -all DIMMs must be registered DIMMs (RDIMMs) + * -paired DIMMs must have the same # of ranks, size & organization + */ + + /* + * check DIMM ranks & sizes + */ + e = 0; + for( i = 0; i < NUM_SLOTS; i += 2 ) { + + if( ( m_bankpop_u32[i/2] != 0 ) && + ( ( m_dimm[i].m_rank_u32 != m_dimm[i+1].m_rank_u32 ) || + ( m_dimm[i].m_size_u32 != m_dimm[i+1].m_size_u32 ) ) ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> installed DIMMs in bank %u have different ranks/sizes]", i/2 ); + #endif + e++; + } + + } + + /* + * return on error + */ + if( e != 0 ) { + #ifdef U4_DEBUG + printf( "\r\n" ); + #endif + return RET_ERR; + } + + /* + * check valid DIMM organisation (must be x4) + */ + e = 0; + for( i = 0; i < m_dcnt_u32; i++ ) { + + if( ( m_dptr[i]->m_orgmsk_u32 & DIMM_ORG_x4 ) == 0 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> wrong DIMM organisation in bank %u]", + m_dptr[i]->m_bank_u32 ); + #endif + e++; + } + + } + + /* + * return on error + */ + if( e != 0 ) { + #ifdef U4_DEBUG + printf( "\r\n" ); + #endif + return RET_ERR; + } + + e = (uint32_t) ~0; + for( i = 0; i < m_dcnt_u32; i++ ) { + e &= m_dptr[i]->m_type_u32; + } + + /* + * return on error + */ + if( e == 0 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> installed DIMMs are of different type]\r\n" ); + #endif + return RET_ERR; + } + + /* + * setup generic dimm + */ + m_gendimm.m_type_u32 = e; + + /* + * check valid width, ecc & burst length + */ + e = 0; + for( i = 0; i < m_dcnt_u32; i++ ) { + + if( m_dptr[i]->m_width_u32 != DIMM_WIDTH ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> invalid DIMM width in bank %u]", + m_dptr[i]->m_bank_u32 ); + #endif + e++; + } + + if( m_dptr[i]->m_ecc_u32 == 0 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> DIMM(s) do not support ECC in bank %u]", + m_dptr[i]->m_bank_u32 ); + #endif + e++; + } + + if( ( m_dptr[i]->m_burst_u32 & DIMM_BURSTLEN_4 ) == 0 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> DIMM(s) have invalid burst length in bank %u]", + m_dptr[i]->m_bank_u32 ); + #endif + e++; + } + + } + + /* + * return on error + */ + if( e != 0 ) { + #ifdef U4_DEBUG + printf( "\r\n" ); + #endif + return RET_ERR; + } + + /* + * setup generic dimm + */ + m_gendimm.m_width_u32 = m_dptr[0]->m_width_u32; + m_gendimm.m_ecc_u32 = m_dptr[0]->m_ecc_u32; + m_gendimm.m_burst_u32 = m_dptr[0]->m_burst_u32; + + /* + * success + */ + m_gendimm.m_pop_u32 = SL_POP; + + /* + * setup timing parameters + */ + + /* + * find smallest common CL value + */ + l_tmp_u32 = (uint32_t) ~0; + for( i = 0; i < m_dcnt_u32; i++ ) { + l_tmp_u32 &= m_dptr[i]->m_clmsk_u32; + } + + m_gendimm.m_clmsk_u32 = l_tmp_u32; + ddr2_get_cl( &m_gendimm ); + + /* + * find fastest common DIMM speed for all common CL values + */ + for( i = 0; i < m_gendimm.m_clcnt_u32; i++ ) { + m_gendimm.m_speed_pu32[i] = (uint32_t) ~0; + + for( j = 0; j < m_dcnt_u32; j++ ) { + l_tmp0_u32 = + ddr2_cl2speed( m_dptr[j], + m_gendimm.m_clval_pu32[i], + &l_tmp1_u32 ); + + if( m_gendimm.m_speed_pu32[i] > l_tmp0_u32 ) { + m_gendimm.m_speed_pu32[i] = l_tmp0_u32; + m_gendimm.m_tCK_pu32[i] = l_tmp1_u32; + } + + } + + } + + /* + * check wether cl values are supported by U4 + */ + for( i = 0; i < m_gendimm.m_clcnt_u32; i++ ) { + + if( ( m_gendimm.m_clval_pu32[i] >= U4_MIN_CL ) && + ( m_gendimm.m_clval_pu32[i] <= U4_MAX_CL ) ) { + break; + } + + } + + if( i == m_gendimm.m_clcnt_u32 ) { + #ifdef U4_DEBUG + printf( "\r\n [ERROR -> DIMM's CL values not supported]\r\n" ); + #endif + return RET_ERR; + } + + /* + * choose cl/speed values to use: prefer speed over CL + * i holds smallest supported cl value of u4 already + */ + l_tmp_u32 = 0; + while( i < m_gendimm.m_clcnt_u32 ) { + + if( l_tmp_u32 < m_gendimm.m_speed_pu32[i] ) { + l_tmp_u32 = m_gendimm.m_speed_pu32[i]; + m_dclidx_u32 = i; + } + + i++; + } + + /* + * choose largest number of banks + */ + m_gendimm.m_bankcnt_u32 = 0; + + for( i = 0; i < m_dcnt_u32; i++ ) { + + if( m_gendimm.m_bankcnt_u32 < m_dptr[i]->m_bankcnt_u32 ) { + m_gendimm.m_bankcnt_u32 = m_dptr[i]->m_bankcnt_u32; + } + + } + + /* + * setup fastest possible timing parameters for all DIMMs + */ + m_gendimm.m_tRP_u32 = 0; + m_gendimm.m_tRRD_u32 = 0; + m_gendimm.m_tRCD_u32 = 0; + m_gendimm.m_tWR_u32 = 0; + m_gendimm.m_tWTR_u32 = 0; + m_gendimm.m_tRTP_u32 = 0; + m_gendimm.m_tRAS_u32 = 0; + m_gendimm.m_tRC_u32 = 0; + m_gendimm.m_tRFC_u32 = 0; + m_gendimm.m_tREF_u32 = (uint32_t) ~0; + + for( i = 0; i < m_dcnt_u32; i++ ) { + + if( m_gendimm.m_tRP_u32 < m_dptr[i]->m_tRP_u32 ) { + m_gendimm.m_tRP_u32 = m_dptr[i]->m_tRP_u32; + } + + if( m_gendimm.m_tRRD_u32 < m_dptr[i]->m_tRRD_u32 ) { + m_gendimm.m_tRRD_u32 = m_dptr[i]->m_tRRD_u32; + } + + if( m_gendimm.m_tRCD_u32 < m_dptr[i]->m_tRCD_u32 ) { + m_gendimm.m_tRCD_u32 = m_dptr[i]->m_tRCD_u32; + } + + if( m_gendimm.m_tWR_u32 < m_dptr[i]->m_tWR_u32 ) { + m_gendimm.m_tWR_u32 = m_dptr[i]->m_tWR_u32; + } + + if( m_gendimm.m_tWTR_u32 < m_dptr[i]->m_tWTR_u32 ) { + m_gendimm.m_tWTR_u32 = m_dptr[i]->m_tWTR_u32; + } + + if( m_gendimm.m_tRTP_u32 < m_dptr[i]->m_tRTP_u32 ) { + m_gendimm.m_tRTP_u32 = m_dptr[i]->m_tRTP_u32; + } + + if( m_gendimm.m_tRAS_u32 < m_dptr[i]->m_tRAS_u32 ) { + m_gendimm.m_tRAS_u32 = m_dptr[i]->m_tRAS_u32; + } + + if( m_gendimm.m_tRC_u32 < m_dptr[i]->m_tRC_u32 ) { + m_gendimm.m_tRC_u32 = m_dptr[i]->m_tRC_u32; + } + + if( m_gendimm.m_tRFC_u32 < m_dptr[i]->m_tRFC_u32 ) { + m_gendimm.m_tRFC_u32 = m_dptr[i]->m_tRFC_u32; + } + + if( m_gendimm.m_tREF_u32 > m_dptr[i]->m_tREF_u32 ) { + m_gendimm.m_tREF_u32 = m_dptr[i]->m_tREF_u32; + } + + } + + return RET_OK; +} + +static void +u4_group2dimmsDS( dimm_t *f_dimm0, dimm_t *f_dimm1 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -at least 2 slots are populated + * -the 2 DIMMs are equal + * -DIMMs are double sided (2 ranks) + * + * RESULT: + * 1 group of 2 ranks (2 ranks/2 DIMMs) + * -> CS mode 1 (one double sided DIMM pair) + */ + l_dgr->m_size_u32 = 2 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 0; + l_dgr->m_csmode_u32 = 1; + l_dgr->m_dcnt_u32 = 2; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + + m_dgrcnt_u32++; +} + +static void +u4_group2dimmsSS( dimm_t *f_dimm0, dimm_t *f_dimm1 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -at least 2 slots are populated + * -the 2 DIMMs are equal + * -DIMMs are single sided (1 rank) + * + * RESULT: + * 1 group of 1 rank (1 rank/2 DIMMs) + * -> CS mode 0 (one single sided DIMM pair) + */ + l_dgr->m_size_u32 = 2 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 1; + l_dgr->m_csmode_u32 = 0; + l_dgr->m_dcnt_u32 = 2; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + + m_dgrcnt_u32++; +} + +static void +u4_group4dimmsDS( dimm_t *f_dimm0, dimm_t *f_dimm1, + dimm_t *f_dimm2, dimm_t *f_dimm3 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -4 slots are populated + * -all 4 DIMMs are equal + * -DIMMs are double sided (2 ranks) + * + * RESULT: + * 1 group of 4 ranks (2 ranks/2 DIMMs) + * -> CS mode 2 (two double sided DIMM pairs) + */ + l_dgr->m_size_u32 = 4 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 0; + l_dgr->m_csmode_u32 = 2; + l_dgr->m_dcnt_u32 = 4; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + l_dgr->m_dptr[2] = f_dimm2; + l_dgr->m_dptr[3] = f_dimm3; + + m_dgrcnt_u32++; +} + +static void +u4_group4dimmsSS( dimm_t *f_dimm0, dimm_t *f_dimm1, + dimm_t *f_dimm2, dimm_t *f_dimm3 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -4 slots are populated + * -all 4 DIMMs are equal + * -DIMMs are single sided (1 rank) + * + * RESULT: + * 1 group of 2 ranks (1 rank/2 DIMMs) + * -> CS mode 1 (two single sided DIMM pairs) + */ + l_dgr->m_size_u32 = 4 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 1; + l_dgr->m_csmode_u32 = 1; + l_dgr->m_dcnt_u32 = 4; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + l_dgr->m_dptr[2] = f_dimm2; + l_dgr->m_dptr[3] = f_dimm3; + + m_dgrcnt_u32++; +} + +static void +u4_group8dimmsDS( dimm_t *f_dimm0, dimm_t *f_dimm1, + dimm_t *f_dimm2, dimm_t *f_dimm3, + dimm_t *f_dimm4, dimm_t *f_dimm5, + dimm_t *f_dimm6, dimm_t *f_dimm7 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -8 slots are populated + * -all 8 DIMMs are equal + * -DIMMs are double sided (2 ranks) + * + * RESULT: + * 1 group of 8 ranks (2 ranks/2 DIMMs) + * -> CS mode 3 (four double sided DIMM pairs) + */ + l_dgr->m_size_u32 = 8 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 0; + l_dgr->m_csmode_u32 = 3; + l_dgr->m_dcnt_u32 = 8; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + l_dgr->m_dptr[2] = f_dimm2; + l_dgr->m_dptr[3] = f_dimm3; + l_dgr->m_dptr[4] = f_dimm4; + l_dgr->m_dptr[5] = f_dimm5; + l_dgr->m_dptr[6] = f_dimm6; + l_dgr->m_dptr[7] = f_dimm7; + + m_dgrcnt_u32++; +} + +static void +u4_group8dimmsSS( dimm_t *f_dimm0, dimm_t *f_dimm1, + dimm_t *f_dimm2, dimm_t *f_dimm3, + dimm_t *f_dimm4, dimm_t *f_dimm5, + dimm_t *f_dimm6, dimm_t *f_dimm7 ) +{ + dgroup_t *l_dgr = &m_dgroup[m_dgrcnt_u32]; + + /* + * known conditions at this point: + * -8 slots are populated + * -all 8 DIMMs are equal + * -DIMMs are single sided (1 rank) + * + * RESULT: + * 1 group of 4 ranks (1 rank/2 DIMMs) + * -> CS mode 2 (four single sided DIMM pairs) + */ + l_dgr->m_size_u32 = 8 * ( f_dimm0->m_size_u32 * f_dimm0->m_rank_u32 ); + l_dgr->m_ss_u32 = 1; + l_dgr->m_csmode_u32 = 2; + l_dgr->m_dcnt_u32 = 8; + l_dgr->m_dptr[0] = f_dimm0; + l_dgr->m_dptr[1] = f_dimm1; + l_dgr->m_dptr[2] = f_dimm2; + l_dgr->m_dptr[3] = f_dimm3; + l_dgr->m_dptr[4] = f_dimm4; + l_dgr->m_dptr[5] = f_dimm5; + l_dgr->m_dptr[6] = f_dimm6; + l_dgr->m_dptr[7] = f_dimm7; + + m_dgrcnt_u32++; +} + +static int32_t +u4_Dcmp( dimm_t *f_dimm0, dimm_t *f_dimm1 ) +{ + + if( ( f_dimm0->m_size_u32 == f_dimm1->m_size_u32 ) && + ( f_dimm0->m_rank_u32 == f_dimm1->m_rank_u32 ) ) { + return RET_OK; + } + + return RET_ERR; +} + +static void +u4_group1banks( uint32_t *bidx ) +{ + uint32_t didx = 2 * bidx[0]; + + /* + * known conditions at this point: + * -either DIMMs 0 & 4 or + * DIMMs 1 & 5 or + * DIMMs 2 & 6 or + * DIMMs 3 & 7 are populated + * -3 (bimini)/1 (maui) pair of slots is empty + * -installed DIMMs are equal + */ + + /* + * double/single sided setup + */ + if( m_dimm[didx].m_rank_u32 == 1 ) { + u4_group2dimmsSS( &m_dimm[didx], &m_dimm[didx+1] ); + } else { + u4_group2dimmsDS( &m_dimm[didx], &m_dimm[didx+1] ); + } + +} + +static void +u4_group2banks( uint32_t *bidx ) +{ + uint32_t didx0 = 2 * bidx[0]; + uint32_t didx1 = 2 * bidx[1]; + + /* + * known conditions at this point: + * -4 slots are populated + */ + + /* + * check wether DIMM banks may be grouped + */ + if( ( ( ( bidx[0] + bidx[1] ) & 0x1 ) != 0 ) && + ( u4_Dcmp( &m_dimm[didx0], &m_dimm[didx1] ) == 0 ) ) { + /* + * double/single sided setup + * NOTE: at this point all DIMMs have the same amount + * of ranks, therefore only the # of ranks on DIMM 0 is checked + */ + if( m_dimm[didx0].m_rank_u32 == 1 ) { + u4_group4dimmsSS( &m_dimm[didx0], &m_dimm[didx0+1], + &m_dimm[didx1], &m_dimm[didx1+1]); + } else { + u4_group4dimmsDS( &m_dimm[didx0], &m_dimm[didx0+1], + &m_dimm[didx1], &m_dimm[didx1+1]); + } + + } else { + u4_group1banks( &bidx[0] ); + u4_group1banks( &bidx[1] ); + } + +} + +static void +u4_group3banks( uint32_t *bidx ) +{ + + if( ( bidx[0] == 0 ) && ( bidx[1] == 1 ) ) { + u4_group2banks( &bidx[0] ); + u4_group1banks( &bidx[2] ); + } else if( ( bidx[1] == 2 ) && ( bidx[2] == 3 ) ) { + u4_group2banks( &bidx[1] ); + u4_group1banks( &bidx[0] ); + } + +} + +static void +u4_group4banks( uint32_t *bidx ) +{ + uint32_t didx0 = 2 * bidx[0]; + uint32_t didx1 = 2 * bidx[1]; + uint32_t didx2 = 2 * bidx[2]; + uint32_t didx3 = 2 * bidx[3]; + + if( ( u4_Dcmp( &m_dimm[didx0], &m_dimm[didx1] ) == RET_OK ) && + ( u4_Dcmp( &m_dimm[didx2], &m_dimm[didx3] ) == RET_OK ) && + ( u4_Dcmp( &m_dimm[didx0], &m_dimm[didx2] ) == RET_OK ) ) { + + if( m_dimm[didx0].m_rank_u32 == 1 ) { + u4_group8dimmsSS( &m_dimm[didx0], &m_dimm[didx0+1], + &m_dimm[didx1], &m_dimm[didx1+1], + &m_dimm[didx2], &m_dimm[didx2+1], + &m_dimm[didx3], &m_dimm[didx3+1] ); + } else { + u4_group8dimmsDS( &m_dimm[didx0], &m_dimm[didx0+1], + &m_dimm[didx1], &m_dimm[didx1+1], + &m_dimm[didx2], &m_dimm[didx2+1], + &m_dimm[didx3], &m_dimm[didx3+1] ); + } + + } else { + u4_group2banks( &bidx[0] ); + u4_group2banks( &bidx[2] ); + } + +} + +static void +u4_sortDIMMgroups( void ) +{ + uint32_t i, j; + + /* + * setup global group pointers + */ + for( i = 0; i < m_dgrcnt_u32; i++ ) { + m_dgrptr[i] = &m_dgroup[i]; + } + + /* + * use a simple bubble sort to sort groups by size (descending) + */ + for( i = 0; i < ( m_dgrcnt_u32 - 1 ); i++ ) { + + for( j = i + 1; j < m_dgrcnt_u32; j++ ) { + + if( m_dgrptr[i]->m_size_u32 < m_dgrptr[j]->m_size_u32 ) { + dgroup_t *l_sgr; + + l_sgr = m_dgrptr[i]; + m_dgrptr[i] = m_dgrptr[j]; + m_dgrptr[j] = l_sgr; + } + + } + + } + +} + +static void +u4_calcDIMMcnfg( void ) +{ + static const uint32_t _2GB = (uint32_t) 0x00800; + static const uint32_t _4GB = (uint32_t) 0x01000; + static const uint32_t _64GB = (uint32_t) 0x10000; + uint32_t l_start_u32 = (uint32_t) 0; + uint32_t l_end_u32 = (uint32_t) 0; + uint32_t l_add2g_u32 = (uint32_t) 1; + uint32_t l_sub2g_u32 = (uint32_t) 1; + uint32_t i; + + /* + * setup DIMM group parameters + */ + for( i = 0; i < m_dgrcnt_u32; i++ ) { + l_end_u32 = l_start_u32 + m_dgrptr[i]->m_size_u32; + + if( m_dgrptr[i]->m_size_u32 > _2GB ) { + + if( l_end_u32 < _64GB ) { + l_add2g_u32 = ( l_end_u32 >> 11 ); + } else { + l_add2g_u32 = 1; + } + + if( l_start_u32 == 0 ) { + l_sub2g_u32 = 1; + } else { + l_sub2g_u32 = ( l_start_u32 >> 11 ); + } + + } else if( l_add2g_u32 != 1 ) { + l_start_u32 += _2GB; + l_end_u32 += _2GB; + l_add2g_u32 = 1; + l_sub2g_u32 = 1; + } + + /* + * save values for the group + */ + m_dgrptr[i]->m_start_u32 = ( l_start_u32 >> 7 ); // = /128 + m_dgrptr[i]->m_end_u32 = ( l_end_u32 >> 7 ); + m_dgrptr[i]->m_add2g_u32 = l_add2g_u32; + m_dgrptr[i]->m_sub2g_u32 = l_sub2g_u32; + + /* + * continue with next group + */ + if( l_end_u32 != _2GB ) { + l_start_u32 = l_end_u32; + } else { + l_start_u32 = _4GB; + } + + } + +} + +static int32_t +u4_calcDIMMmemmode( void ) +{ + static const uint32_t MAX_ORG = (uint32_t) 0x10; + static const uint32_t MIN_BASE = (uint32_t) 0x80; + static const uint32_t MAX_MODE = (uint32_t) 0x10; + static const uint32_t MODE_ADD = (uint32_t) 0x04; + dimm_t *l_dptr; + uint32_t l_modeoffs_u32; + uint32_t l_sizebase_u32; + int32_t ret = RET_OK; + uint32_t i, j; + + /* + * loop through all DIMM groups and calculate memmode setting + */ + for( i = 0; i < m_dgrcnt_u32; i++ ) { + l_dptr = m_dgrptr[i]->m_dptr[0]; // all dimms in one group are equal! + + l_modeoffs_u32 = MAX_ORG / l_dptr->m_orgval_u32; + l_modeoffs_u32 /= (uint32_t) 2; + l_sizebase_u32 = ( MIN_BASE << l_modeoffs_u32 ); + + j = 0; + while( ( l_sizebase_u32 != l_dptr->m_size_u32 ) && + ( j < MAX_MODE ) ) { + l_sizebase_u32 <<= 1; + j += (uint32_t) MODE_ADD; + } + + // return on error + if( j >= MAX_MODE ) { + #ifdef U4_INFO + uint32_t b, k, l; + printf( "\r\n [ERROR -> unsupported memory type in bank(s)" ); + + l = 0; + for( k = 0; k < m_dgrptr[i]->m_dcnt_u32; k++ ) { + b = m_dgrptr[i]->m_dptr[k]->m_bank_u32; + + if( ( l & ( 1 << b ) ) == 0 ) { + printf( " %u", b ); + l |= ( 1 << b ); + } + + } + + printf( "]\r\n" ); + #endif + + ret = RET_ERR; + } else { + m_dgrptr[i]->m_memmd_u32 = l_modeoffs_u32 + j; + } + + } + + return ret; +} + +static void +u4_setupDIMMgroups( void ) +{ + static const uint64_t _1MB = (uint64_t) 0x100000; + uint32_t l_bcnt_u32; + uint32_t l_bidx_u32[NUM_BANKS]; + uint32_t i; + + /* + * calculate number of populated banks + * IMPORTANT: array must be in ascending order! + */ + l_bcnt_u32 = 0; + for( i = 0; i < NUM_BANKS; i++ ) { + + if( m_bankpop_u32[i] != 0 ) { + l_bidx_u32[l_bcnt_u32] = i; + l_bcnt_u32++; + } + + } + + switch( l_bcnt_u32 ) { + case 4: u4_group4banks( &l_bidx_u32[0] ); break; + case 3: u4_group3banks( &l_bidx_u32[0] ); break; + case 2: u4_group2banks( &l_bidx_u32[0] ); break; + case 1: u4_group1banks( &l_bidx_u32[0] ); break; + } + + /* + * sort DIMM groups by size (descending) + */ + u4_sortDIMMgroups(); + + /* + * calculate overall memory size in bytes + * (group size is in MB) + */ + m_memsize_u64 = 0; + for( i = 0; i < m_dgrcnt_u32; i++ ) { + m_memsize_u64 += (uint64_t) m_dgrptr[i]->m_size_u32 * _1MB; + } + +} + +static int32_t +u4_setup_core_clock( void ) +{ + static const uint32_t MCLK = (uint32_t) 266; + static const uint32_t CDIV = (uint32_t) 66; + static const uint32_t CMAX = (uint32_t) 7; + static const uint32_t MERR = (uint32_t) 10; + uint32_t volatile l_cclk_u32; + uint32_t volatile l_pll2_u32; + uint32_t i, s; + + #ifdef U4_INFO + printf( " [core clock reset: ]" ); + #endif + + /* + * calculate speed value + */ + s = m_gendimm.m_speed_pu32[m_dclidx_u32]; + s -= MCLK; + s /= CDIV; + + /* + * insert new core clock value + */ + l_cclk_u32 = load32_ci( ClkCntl_R ); + l_cclk_u32 &= ~CLK_DDR_CLK_MSK; + l_cclk_u32 |= ( s << 18 ); + + + // return on error + if( s > CMAX ) { + #ifdef U4_INFO + printf( "\b\b\b\bERR\r\n" ); + #endif + return RET_ERR; + } + + /* + * reset core clock + */ + store32_ci( ClkCntl_R, l_cclk_u32 ); + dly( 0x1000000 ); + or32_ci( PLL2Cntl_R, IBIT(0) ); + dly( 0x1000000 ); + + /* + * wait for reset to finish + */ + do { + l_pll2_u32 = load32_ci( PLL2Cntl_R ); + } while( ( l_pll2_u32 & IBIT(0) ) != 0 ); + + /* + * wait for stable PLL + */ + s = 0; + do { + l_pll2_u32 = ( load32_ci( PLL2Cntl_R ) & IBIT(2) ); + + for( i = 0; i < 4; i++ ) { + l_pll2_u32 &= ( load32_ci( PLL2Cntl_R ) & IBIT(2) ); + l_pll2_u32 &= ( load32_ci( PLL2Cntl_R ) & IBIT(2) ); + l_pll2_u32 &= ( load32_ci( PLL2Cntl_R ) & IBIT(2) ); + dly( 0x10000 ); + } + + } while( ( l_pll2_u32 == 0 ) && ( s++ < MERR ) ); + + if( s >= MERR ) { + #ifdef U4_INFO + printf( "\b\b\b\bERR\r\n" ); + #endif + return RET_ERR; + } + + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + #endif + + return RET_OK; +} + +static void +u4_auto_calib_init( void ) +{ + static const uint32_t SEQ[] = { + 0xb1000000, 0xd1000000, 0xd1000000, 0xd1000000, + 0xd1000000, 0xd1000000, 0xd1000000, 0xd1000000, + 0xd1000000, 0xd1000000, 0xd1000000, 0xd1000000, + 0xd1000000, 0xd1000000, 0xd1000400, 0x00000000, + }; + + uint64_t i; + uint32_t j; + + for( i = MemInit00_R, j = 0; i <= MemInit15_R; i += 0x10, j++ ) { + store32_ci( i, SEQ[j] ); + } + +} + +#if 0 +static uint32_t +u4_RSL_BLane( uint32_t f_Rank_u32, uint32_t f_BLane_u32 ) +{ + static const uint32_t MemProgCntl_V = (uint32_t) 0x80000500; + static const uint32_t CalConf0_V = (uint32_t) 0x0000aa10; + uint32_t l_MemProgCntl_u32; + uint32_t l_CalConf0_u32; + uint32_t l_MeasStat_u32; + uint32_t l_CalC_u32; + uint64_t MeasStat_R; + uint64_t CalC_R; + uint64_t VerC_R; + uint32_t shft; + uint32_t v; + + if( f_BLane_u32 < 4 ) { + MeasStat_R = MeasStatusC0_R; + CalC_R = CalC0_R; + VerC_R = RstLdEnVerniersC0_R; + } else if( f_BLane_u32 < 8 ) { + f_BLane_u32 -= 4; + MeasStat_R = MeasStatusC1_R; + CalC_R = CalC1_R; + VerC_R = RstLdEnVerniersC1_R; + } else if( f_BLane_u32 < 12 ) { + f_BLane_u32 -= 8; + MeasStat_R = MeasStatusC2_R; + CalC_R = CalC2_R; + VerC_R = RstLdEnVerniersC2_R; + } else if( f_BLane_u32 == 16 ) { + f_BLane_u32 = 4; + MeasStat_R = MeasStatusC1_R; + CalC_R = CalC1_R; + VerC_R = RstLdEnVerniersC1_R; + } else if( f_BLane_u32 == 17 ) { + f_BLane_u32 = 4; + MeasStat_R = MeasStatusC3_R; + CalC_R = CalC3_R; + VerC_R = RstLdEnVerniersC3_R; + } else { + f_BLane_u32 -= 12; + MeasStat_R = MeasStatusC3_R; + CalC_R = CalC3_R; + VerC_R = RstLdEnVerniersC3_R; + } + + shft = (uint32_t) 28 - ( f_BLane_u32 * 4 ); + + /* + * start auto calibration logic & wait for completion + */ + or32_ci( MeasStat_R, IBIT(0) ); + + do { + l_MeasStat_u32 = load32_ci( MeasStat_R ); + } while( ( l_MeasStat_u32 & IBIT(0) ) == 1 ); + + l_CalConf0_u32 = CalConf0_V; + store32_ci( CalConf0_R, l_CalConf0_u32 ); + + for( v = 0x000; v < (uint32_t) 0x100; v++ ) { + store32_ci( VerC_R, ( v << 24 ) | ( v << 16 ) ); + + l_MemProgCntl_u32 = MemProgCntl_V; + l_MemProgCntl_u32 |= + ( (uint32_t) 0x00800000 >> f_Rank_u32 ); + store32_ci( MemProgCntl_R, l_MemProgCntl_u32 ); + + do { + l_MemProgCntl_u32 = load32_ci( MemProgCntl_R ); + } while( ( l_MemProgCntl_u32 & IBIT(1) ) == 0 ); + + l_CalC_u32 = ( ( load32_ci( CalC_R ) >> shft ) & + (uint32_t) 0xf ); + + if( l_CalC_u32 != (uint32_t) 0xa ) { + v--; + break; + } + + } + + if( v == (uint32_t) 0x100 ) { + v = (uint32_t) ~1; + } + + return v; +} +#endif + +static uint32_t +u4_RMDF_BLane( uint32_t f_Rank_u32, uint32_t f_BLane_u32 ) +{ + static const uint32_t MemProgCntl_V = (uint32_t) 0x80000f00; + static const uint32_t CalConf0_V = (uint32_t) 0x0000ac10; + uint32_t l_MemProgCntl_u32; + uint32_t l_CalConf0_u32; + uint32_t l_MeasStat_u32; + uint32_t l_CalC_u32; + uint64_t MeasStat_R; + uint64_t CalC_R; + uint64_t VerC_R; + uint32_t shft; + uint32_t v; + + if( f_BLane_u32 < 4 ) { + MeasStat_R = MeasStatusC0_R; + CalC_R = CalC0_R; + VerC_R = RstLdEnVerniersC0_R; + } else if( f_BLane_u32 < 8 ) { + f_BLane_u32 -= 4; + MeasStat_R = MeasStatusC1_R; + CalC_R = CalC1_R; + VerC_R = RstLdEnVerniersC1_R; + } else if( f_BLane_u32 < 12 ) { + f_BLane_u32 -= 8; + MeasStat_R = MeasStatusC2_R; + CalC_R = CalC2_R; + VerC_R = RstLdEnVerniersC2_R; + } else if( f_BLane_u32 == 16 ) { + f_BLane_u32 = 4; + MeasStat_R = MeasStatusC1_R; + CalC_R = CalC1_R; + VerC_R = RstLdEnVerniersC1_R; + } else if( f_BLane_u32 == 17 ) { + f_BLane_u32 = 4; + MeasStat_R = MeasStatusC3_R; + CalC_R = CalC3_R; + VerC_R = RstLdEnVerniersC3_R; + } else { + f_BLane_u32 -= 12; + MeasStat_R = MeasStatusC3_R; + CalC_R = CalC3_R; + VerC_R = RstLdEnVerniersC3_R; + } + + shft = (uint32_t) 28 - ( f_BLane_u32 * 4 ); + + /* + * start auto calibration logic & wait for completion + */ + or32_ci( MeasStat_R, IBIT(0) ); + + do { + l_MeasStat_u32 = load32_ci( MeasStat_R ); + } while( ( l_MeasStat_u32 & IBIT(0) ) == 1 ); + + l_CalConf0_u32 = CalConf0_V; + l_CalConf0_u32 |= ( f_BLane_u32 << 5 ); + store32_ci( CalConf0_R, l_CalConf0_u32 ); + + for( v = 0x000; v < (uint32_t) 0x100; v++ ) { + store32_ci( VerC_R, ( v << 24 ) | ( v << 16 ) ); + + l_MemProgCntl_u32 = MemProgCntl_V; + l_MemProgCntl_u32 |= + ( (uint32_t) 0x00800000 >> f_Rank_u32 ); + store32_ci( MemProgCntl_R, l_MemProgCntl_u32 ); + + do { + l_MemProgCntl_u32 = load32_ci( MemProgCntl_R ); + } while( ( l_MemProgCntl_u32 & IBIT(1) ) == 0 ); + + l_CalC_u32 = ( ( load32_ci( CalC_R ) >> shft ) & + (uint32_t) 0xf ); + + if( l_CalC_u32 != (uint32_t) 0xa ) { + v--; + break; + } + + } + + if( v == (uint32_t) 0x100 ) { + v = (uint32_t) ~1; + } + + return v; +} + +static int32_t +u4_RMDF_Rank( uint32_t f_Rank_u32, + uint32_t *f_Buf_pu32 ) +{ + int32_t l_Err_pi32 = 0; + uint32_t b; + + for( b = 0; ( b < MAX_BLANE ) && ( l_Err_pi32 == 0 ); b++ ) { + f_Buf_pu32[b] = u4_RMDF_BLane( f_Rank_u32, b ); + + if( f_Buf_pu32[b] == (uint32_t) ~0 ) { + f_Buf_pu32[b] = 0; + l_Err_pi32++; + } else if( f_Buf_pu32[b] == (uint32_t) ~1 ) { + f_Buf_pu32[b] = (uint32_t) 0xff; + l_Err_pi32++; + } + + } + + return l_Err_pi32; +} + +static int32_t +u4_auto_calib_MemBus( auto_calib_t *f_ac_pt ) +{ + uint32_t RdMacDly, RdMacCnt; + uint32_t ResMuxDly, ResMuxCnt; + uint32_t RdPipeDly; + uint32_t l_Buf_pu32[MAX_DRANKS][MAX_BLANE]; + uint32_t l_Rnk_pu32[MAX_DRANKS]; + uint32_t l_Ver_u32; + int32_t l_Err_i32; + uint32_t bidx; + uint32_t n, r, b; + + /* + * read starting delays out of the MemBus register + */ + RdMacDly = ( load32_ci( MemBusCnfg_R ) >> 28 ) & 0xf; + ResMuxDly = ( load32_ci( MemBusCnfg_R ) >> 24 ) & 0xf; + + /* + * initialize ranks as not populated + */ + for( r = 0; r < MAX_DRANKS; r++ ) { + l_Rnk_pu32[r] = 0; + } + + /* + * run through every possible delays of + * RdMacDly, ResMuxDly & RdPipeDly until + * the first working configuration is found + */ + RdPipeDly = 0; + do { + and32_ci( MemBusCnfg2_R, ~0x3 ); + or32_ci( MemBusCnfg2_R, RdPipeDly ); + + RdMacCnt = RdMacDly; + ResMuxCnt = ResMuxDly; + + /* + * RdMacDly >= ResMuxDly + */ + do { + and32_ci( MemBusCnfg_R, ( 1 << 24 ) - 1 ); + or32_ci( MemBusCnfg_R, ( RdMacCnt << 28 ) | + ( ResMuxCnt << 24 ) ); + and32_ci( MemBusCnfg2_R, ( 1 << 28 ) - 1 ); + or32_ci( MemBusCnfg2_R, ( RdMacCnt << 28 ) ); + + /* + * check the current value for every installed + * DIMM on each side for every bytelane + */ + l_Err_i32 = 0; + for( n = 0; + ( n < NUM_SLOTS ) && + ( l_Err_i32 == 0 ); + n += 2 ) { + + if( m_dimm[n].m_pop_u32 ) { + /* + * run through all 18 bytelanes of every rank + */ + for( r = n; + ( r < n + m_dimm[n].m_rank_u32 ) && + ( l_Err_i32 == 0 ); + r++ ) { + l_Rnk_pu32[r] = 1; + + l_Err_i32 = + u4_RMDF_Rank( r, + &l_Buf_pu32[r][0] ); + } + + } + + } + + /* + * decrementation before exit is wanted! + */ + RdMacCnt--; + ResMuxCnt--; + } while( ( ResMuxCnt > 0 ) && + ( l_Err_i32 != 0 ) ); + + if( l_Err_i32 != 0 ) { + RdPipeDly++; + } + + } while( ( RdPipeDly < 4 ) && + ( l_Err_i32 != 0 ) ); + + /* + * if l_Err_pi32 == 0 the auto calibration passed ok + */ + if( l_Err_i32 != 0 ) { + return RET_ERR; + } + + /* + * insert delay values into return struct + */ + and32_ci( MemBusCnfg_R, ( 1 << 24 ) - 1 ); + or32_ci( MemBusCnfg_R, ( RdMacCnt << 28 ) | + ( ResMuxCnt << 24 ) ); + and32_ci( MemBusCnfg2_R, ( ( 1 << 28 ) - 1 ) & ~0x3 ); + or32_ci( MemBusCnfg2_R, ( RdMacCnt << 28 ) | RdPipeDly ); + + f_ac_pt->m_MemBusCnfg_u32 = load32_ci( MemBusCnfg_R ); + f_ac_pt->m_MemBusCnfg2_u32 = load32_ci( MemBusCnfg2_R ); + + /* + * calculate the average vernier setting for the + * bytelanes which share one vernier + */ + for( b = 0; b < MAX_BLANE - 2; b += 2 ) { + n = 0; + l_Ver_u32 = 0; + + for( r = 0; r < MAX_DRANKS; r++ ) { + /* + * calculation is done or populated ranks only + */ + if( l_Rnk_pu32[r] != 0 ) { + /* + * calculate average value + */ + l_Ver_u32 += l_Buf_pu32[r][b]; + l_Ver_u32 += l_Buf_pu32[r][b+1]; + n += 2; + + if( b == 4 ) { + l_Ver_u32 += l_Buf_pu32[r][16]; + n++; + } else if( b == 12 ) { + l_Ver_u32 += l_Buf_pu32[r][17]; + n++; + } + + } + + } + + /* + * average the values + */ + l_Ver_u32 /= n; + + /* + * set appropriate vernier register for + * the current bytelane + */ + bidx = ( b >> 2 ); + if( ( b & (uint32_t) 0x3 ) == 0 ) { + l_Ver_u32 <<= 24; + f_ac_pt->m_RstLdEnVerniers_pu32[bidx] = l_Ver_u32; + } else { + l_Ver_u32 <<= 16; + f_ac_pt->m_RstLdEnVerniers_pu32[bidx] |= l_Ver_u32; + } + + } + + return RET_OK; +} + +static int32_t +u4_auto_calib( auto_calib_t *f_ac_pt ) +{ + uint32_t l_MemBusCnfg_S; + uint32_t l_MemBusCnfg2_S; + uint32_t l_RstLdEnVerniers_S[4]; + int32_t l_Ret_i32; + + /* + * save manipulated registers + */ + l_MemBusCnfg_S = load32_ci( MemBusCnfg_R ); + l_MemBusCnfg2_S = load32_ci( MemBusCnfg2_R ); + l_RstLdEnVerniers_S[0] = load32_ci( RstLdEnVerniersC0_R ); + l_RstLdEnVerniers_S[1] = load32_ci( RstLdEnVerniersC1_R ); + l_RstLdEnVerniers_S[2] = load32_ci( RstLdEnVerniersC2_R ); + l_RstLdEnVerniers_S[3] = load32_ci( RstLdEnVerniersC3_R ); + + u4_auto_calib_init(); + l_Ret_i32 = u4_auto_calib_MemBus( f_ac_pt ); + + /* + * restore manipulated registers + */ + store32_ci( MemBusCnfg_R, l_MemBusCnfg_S ); + store32_ci( MemBusCnfg2_R, l_MemBusCnfg2_S ); + store32_ci( RstLdEnVerniersC0_R, l_RstLdEnVerniers_S[0] ); + store32_ci( RstLdEnVerniersC1_R, l_RstLdEnVerniers_S[1] ); + store32_ci( RstLdEnVerniersC2_R, l_RstLdEnVerniers_S[2] ); + store32_ci( RstLdEnVerniersC3_R, l_RstLdEnVerniers_S[3] ); + + return l_Ret_i32; +} + +static int32_t +u4_checkeccerr( eccerror_t *f_ecc_pt ) +{ + uint32_t l_val_u32; + int32_t ret = RET_OK; + + l_val_u32 = load32_ci( MESR_R ); + l_val_u32 >>= 29; + + if( ( l_val_u32 & (uint32_t) 0x7 ) != 0 ) { + + if( ( l_val_u32 & (uint32_t) 0x4 ) != 0 ) { + /* UE */ + ret = RET_ACERR_UE; + } else if( ( l_val_u32 & (uint32_t) 0x1 ) != 0 ) { + /* UEWT */ + ret = RET_ACERR_UEWT; + } else { + /* CE */ + ret = RET_ACERR_CE; + } + + } + + f_ecc_pt->m_err_i32 = ret; + + l_val_u32 = load32_ci( MEAR1_R ); + f_ecc_pt->m_uecnt_u32 = ( ( l_val_u32 >> 24 ) & (uint32_t) 0xff ); + f_ecc_pt->m_cecnt_u32 = ( ( l_val_u32 >> 16 ) & (uint32_t) 0xff ); + + l_val_u32 = load32_ci( MEAR0_R ); + f_ecc_pt->m_rank_u32 = ( ( l_val_u32 >> 29 ) & (uint32_t) 0x7 ); + f_ecc_pt->m_col_u32 = ( ( l_val_u32 >> 18 ) & (uint32_t) 0x7ff ); + f_ecc_pt->m_row_u32 = ( ( l_val_u32 >> 0 ) & (uint32_t) 0x7fff ); + f_ecc_pt->m_bank_u32 = ( ( l_val_u32 >> 15 ) & (uint32_t) 0x7 ); + + return ret; +} + +static uint32_t +u4_CalcScrubEnd( void ) +{ + uint64_t l_scrend_u64 = m_memsize_u64; + + /* + * check for memory hole at 2GB + */ + if( l_scrend_u64 > _2GB ) { + l_scrend_u64 += _2GB; + } + + l_scrend_u64 -= 0x40; + l_scrend_u64 /= 0x10; + + return( (uint32_t) l_scrend_u64 ); +} + +static int32_t +u4_Scrub( uint32_t f_scrub_u32, uint32_t f_pattern_u32, eccerror_t *f_eccerr_pt ) +{ + uint32_t i; + int32_t ret; + + /* + * setup scrub parameters + */ + store32_ci( MSCR_R, 0 ); // stop scrub + store32_ci( MSRSR_R, 0x0 ); // set start + store32_ci( MSRER_R, u4_CalcScrubEnd() ); // set end + store32_ci( MSPR_R, f_pattern_u32 ); // set pattern + + /* + * clear out ECC error registers + */ + store32_ci( MEAR0_R, 0x0 ); + store32_ci( MEAR1_R, 0x0 ); + store32_ci( MESR_R, 0x0 ); + + /* + * Setup Scrub Type + */ + store32_ci( MSCR_R, f_scrub_u32 ); + + if( f_scrub_u32 != BACKGROUND_SCRUB ) { + /* + * wait for scrub to complete + */ + do { + progbar(); + dly( 15000000 ); + i = load32_ci( MSCR_R ); + } while( ( i & f_scrub_u32 ) != 0 ); + + ret = u4_checkeccerr( f_eccerr_pt ); + } else { + ret = RET_OK; + } + + return ret; +} + +static eccerror_t +u4_InitialScrub( void ) +{ + eccerror_t l_eccerr_st[2]; + int32_t l_err_i32[2] = { 0, 0 }; + + l_err_i32[0] = u4_Scrub( IMMEDIATE_SCRUB_WITH_FILL, 0x0, &l_eccerr_st[0] ); + + if( l_err_i32[0] >= -1 /*CE*/ ) { + l_err_i32[1] = u4_Scrub( IMMEDIATE_SCRUB, 0x0, &l_eccerr_st[1] ); + } + + if( l_err_i32[0] < l_err_i32[1] ) { + return l_eccerr_st[0]; + } else { + return l_eccerr_st[1]; + } + +} + +/* + * RND: calculates Timer cycles from the given frequency + * divided by the clock frequency. Values are rounded + * up to the nearest integer value if the division is not even. + */ +#define RND( tXXX ) ( ( ( tXXX ) + tCK - 1 ) / tCK ) + +static void +u4_MemInitSequence( uint32_t tRP, uint32_t tWR, uint32_t tRFC, uint32_t CL, + uint32_t tCK, uint32_t TD ) +{ + /* + * DIMM init sequence + */ + static const uint32_t INI_SEQ[] = { + 0xa0000400, 0x80020000, 0x80030000, 0x80010404, + 0x8000100a, 0xa0000400, 0x90000000, 0x90000000, + 0x8ff0100a, 0x80010784, 0x80010404, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000 + }; + + uint32_t l_MemInit_u32; + uint64_t r; + uint32_t i; + + for( r = MemInit00_R, i = 0; r <= MemInit15_R; r += 0x10, i++ ) { + l_MemInit_u32 = INI_SEQ[i]; + + switch( i ) { + case 0: + case 5: { + l_MemInit_u32 |= ( ( RND( tRP ) - TD ) << 20 ); + break; + } + case 3: { + store32_ci( EMRSRegCntl_R, l_MemInit_u32 & + (uint32_t) 0xffff ); + break; + } + case 4: { + l_MemInit_u32 |= IBIT(23); + } + case 8: { + l_MemInit_u32 |= ( ( RND( tWR ) - 1 ) << 9 ); + l_MemInit_u32 |= ( CL << 4 ); + + store32_ci( MRSRegCntl_R, l_MemInit_u32 & + (uint32_t) 0xffff ); + break; + } + case 6: + case 7: { + l_MemInit_u32 |= ( ( RND( tRFC ) - TD ) << 20 ); + break; + } + + } + + store32_ci( r, l_MemInit_u32 ); + +#ifdef U4_SHOW_REGS + printf( "\r\nMemInit%02d (0x%04X): 0x%08X", i, (uint16_t) r, l_MemInit_u32 ); +#endif + } +#ifdef U4_SHOW_REGS + printf( "\r\n" ); +#endif + /* + * Kick off memory init sequence & wait for completion + */ + store32_ci( MemProgCntl_R, IBIT(0) ); + + do { + i = load32_ci( MemProgCntl_R ); + } while( ( i & IBIT(1) ) == 0 ); + +} + +/* + * static DIMM configuartion settings + */ +static reg_statics_t reg_statics_maui[NUM_SPEED_IDX] = { + { /* 400 Mhz */ + .RRMux = 1, + .WRMux = 1, + .WWMux = 1, + .RWMux = 1, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x60000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x34000000, + .CKDelayU = 0x34000000, + + .MemBusCnfg = 0x00000050 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 2 ) << 24 ) ), + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 533 Mhz */ + .RRMux = 1, + .WRMux = 1, + .WWMux = 1, + .RWMux = 1, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x60000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x18000000, + .CKDelayU = 0x18000000, + + .MemBusCnfg = 0x00002070 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 3 ) << 24 ) ), + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + + 0x12000000, 0x12000000, 0x12000000 , 0x12000000, + 0x12000000, 0x12000000, 0x12000000 , 0x12000000, + 0x12000000, 0x12000000, 0x12000000 , 0x12000000, + 0x12000000, 0x12000000, 0x12000000 , 0x12000000, + 0x12000000, 0x12000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000 , 0x00000000, + 0x00000000, 0x00000000, 0x00000000 , 0x00000000, + 0x00000000, 0x00000000, 0x00000000 , 0x00000000, + 0x00000000, 0x00000000, 0x00000000 , 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 667 Mhz */ + .RRMux = 1, + .WRMux = 1, + .WWMux = 1, + .RWMux = 3, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x60000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x0a000000, + .CKDelayU = 0x0a000000, + + .MemBusCnfg = 0x000040a0 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 3 ) << 24 ) ), + + .CAS1Dly0 = 2, + .CAS1Dly1 = 2, + + .ByteWrClkDel = { + + 0x12000000, 0x12000000, 0x12000000, 0x12000000, + 0x12000000, 0x12000000, 0x12000000, 0x12000000, + 0x12000000, 0x12000000, 0x12000000, 0x12000000, + 0x12000000, 0x12000000, 0x12000000, 0x12000000, + 0x12000000, 0x12000000 +/* + 0x31000000, 0x31000000, 0x31000000, 0x31000000, + 0x31000000, 0x31000000, 0x31000000, 0x31000000, + 0x31000000, 0x31000000, 0x31000000, 0x31000000, + 0x31000000, 0x31000000, 0x31000000, 0x31000000, + 0x31000000, 0x31000000 +*/ + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + } +}; + +static reg_statics_t reg_statics_bimini[NUM_SPEED_IDX] = { + { /* 400 Mhz */ + .RRMux = 2, + .WRMux = 2, + .WWMux = 2, + .RWMux = 2, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x40000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x00000000, + .CKDelayU = 0x28000000, + + .MemBusCnfg = 0x00552070 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 2 ) << 24 ) ), + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 533 Mhz */ + .RRMux = 3, + .WRMux = 3, + .WWMux = 3, + .RWMux = 3, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x40000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x00000000, + .CKDelayU = 0x20000000, + + .MemBusCnfg = 0x00644190 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 3 ) << 24 ) ), + + .CAS1Dly0 = 2, + .CAS1Dly1 = 2, + + .ByteWrClkDel = { + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 667 Mhz */ + .RRMux = 3, + .WRMux = 3, + .WWMux = 3, + .RWMux = 3, + + .MemRdQCnfg = 0x20020820, + .MemWrQCnfg = 0x40041040, + .MemQArb = 0x00000000, + .MemRWArb = 0x30413cc0, + + .ODTCntl = 0x40000000, + .IOPadCntl = 0x001a4000, + .MemPhyModeCntl = 0x00000000, + .OCDCalCntl = 0x00000000, + .OCDCalCmd = 0x00000000, + + .CKDelayL = 0x00000000, + .CKDelayU = 0x00000000, + + .MemBusCnfg = 0x00666270 | + ( ( MAX_RMD << 28 ) | + ( ( MAX_RMD - 3 ) << 24 ) ), + + .CAS1Dly0 = 2, + .CAS1Dly1 = 2, + + .ByteWrClkDel = { + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000, 0x14000000, 0x14000000, + 0x14000000, 0x14000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + } +}; + +static reg_statics_t reg_statics_kauai[NUM_SPEED_IDX] = { + { /* 400 Mhz */ + .RRMux = 0, + .WRMux = 0, + .WWMux = 0, + .RWMux = 0, + + .MemRdQCnfg = 0, + .MemWrQCnfg = 0, + .MemQArb = 0, + .MemRWArb = 0, + + .ODTCntl = 0, + .IOPadCntl = 0, + .MemPhyModeCntl = 0, + .OCDCalCntl = 0, + .OCDCalCmd = 0, + + .CKDelayL = 0, + .CKDelayU = 0, + + .MemBusCnfg = 0, + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 533 Mhz */ + .RRMux = 0, + .WRMux = 0, + .WWMux = 0, + .RWMux = 0, + + .MemRdQCnfg = 0, + .MemWrQCnfg = 0, + .MemQArb = 0, + .MemRWArb = 0, + + .ODTCntl = 0, + .IOPadCntl = 0, + .MemPhyModeCntl = 0, + .OCDCalCntl = 0, + .OCDCalCmd = 0, + + .CKDelayL = 0, + .CKDelayU = 0, + + .MemBusCnfg = 0, + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + }, + { /* 667 Mhz */ + .RRMux = 0, + .WRMux = 0, + .WWMux = 0, + .RWMux = 0, + + .MemRdQCnfg = 0, + .MemWrQCnfg = 0, + .MemQArb = 0, + .MemRWArb = 0, + + .ODTCntl = 0, + .IOPadCntl = 0, + .MemPhyModeCntl = 0, + .OCDCalCntl = 0, + .OCDCalCmd = 0, + + .CKDelayL = 0, + .CKDelayU = 0, + + .MemBusCnfg = 0, + + .CAS1Dly0 = 0, + .CAS1Dly1 = 0, + + .ByteWrClkDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + }, + .ReadStrobeDel = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000 + } + + } +}; + +static int32_t +u4_start( eccerror_t *f_ecc_pt ) +{ + /* + * maximum runs for auto calibration + */ + static const uint32_t MAX_ACERR = (uint32_t) 5; + + /* + * fixed u4/DIMM timer/timing values for calculation + */ + static const uint32_t TD = (uint32_t) 2; // u4 delay cycles for loading a timer + static const uint32_t AL = (uint32_t) 0; // additional latency (fix) + static const uint32_t BL = (uint32_t) 4; // burst length (fix) + + uint32_t SPEED = m_gendimm.m_speed_pu32[m_dclidx_u32]; + uint32_t CL = m_gendimm.m_clval_pu32[m_dclidx_u32]; + uint32_t RL = AL + CL; + uint32_t WL = RL - 1; + uint32_t tCK = m_gendimm.m_tCK_pu32[m_dclidx_u32]; + uint32_t tRAS = m_gendimm.m_tRAS_u32; + uint32_t tRTP = m_gendimm.m_tRTP_u32; + uint32_t tRP = m_gendimm.m_tRP_u32; + uint32_t tWR = m_gendimm.m_tWR_u32; + uint32_t tRRD = m_gendimm.m_tRRD_u32; + uint32_t tRC = m_gendimm.m_tRC_u32; + uint32_t tRCD = m_gendimm.m_tRCD_u32; + uint32_t tWTR = m_gendimm.m_tWTR_u32; + uint32_t tRFC = m_gendimm.m_tRFC_u32; + uint32_t tREF = m_gendimm.m_tREF_u32; + + reg_statics_t *rst = 0; + + uint32_t l_RAS0_u32; + uint32_t l_RAS1_u32; + uint32_t l_CAS0_u32; + uint32_t l_CAS1_u32; + uint32_t l_MemRfshCntl_u32; + uint32_t l_UsrCnfg_u32; + uint32_t l_DmCnfg_u32; + + uint32_t l_MemArbWt_u32; + uint32_t l_MemRWArb_u32; + uint32_t l_MemBusCnfg_u32; + + auto_calib_t l_ac_st; + int32_t l_ac_i32; + uint32_t l_acerr_i32; + uint32_t sidx; + uint32_t i, j, t0, t1; + + /* + * set index for different 400/533/667 Mhz setup + */ + switch( SPEED ) { + case 400: + case 533: + case 667: { + sidx = SPEED; + sidx -= 400; + sidx /= 133; + break; + } + + default: { + #ifdef U4_DEBUG2 + printf( "\r\n-> DIMM speed of %03u not supported\r\n", + m_gendimm.m_speed_pu32[m_dclidx_u32] ); + #endif + return RET_ERR; + } + + } + + /* + * setup pointer to the static register settings + */ + if( IS_MAUI ) { + rst = ®_statics_maui[sidx]; + } else if( IS_BIMINI ) { + rst = ®_statics_bimini[sidx]; + } else if( IS_KAUAI ) { + rst = ®_statics_kauai[sidx]; + } + + /* + * Switch off Fast Path by default for all DIMMs + * running with more than 400Mhz + */ + if( SPEED == 400 ) { + or32_ci( APIMemRdCfg_R, IBIT(30) ); + #ifdef U4_INFO + printf( " [fastpath : ON]\r\n" ); + #endif + } else { + and32_ci( APIMemRdCfg_R, ~IBIT(30) ); + #ifdef U4_INFO + printf( " [fastpath : OFF]\r\n" ); + #endif + } + + + #ifdef U4_INFO + printf( " [register setup : ]" ); + #endif + + /* + * setup RAS/CAS timers2 + * NOTE: subtract TD from all values because of the delay + * caused by reloading timers (see spec) + */ + + /* + * RAS Timer 0 + */ + // TiAtP = RND(tRAS) -> RAS0[0:4] + l_RAS0_u32 = ( ( RND( tRAS ) - TD ) << 27 ); + // TiRtP = AL + BL/2 - 2 + RND(tRTP) -> RAS01[5:9] + l_RAS0_u32 |= ( ( AL + BL/2 - 2 + RND( tRTP ) - TD ) << 22 ); + // TiWtP = WL + BL/2 + RND(tWR) -> RAS0[10:14] + l_RAS0_u32 |= ( ( WL + BL/2 + RND( tWR ) - TD ) << 17 ); + // TiPtA = RND(tRP) -> RAS0[15:19] + l_RAS0_u32 |= ( ( RND( tRP ) - TD ) << 12 ); + // TiPAtA = RND(tRP) or + // RND(tRP) + 1 for 8 bank devices -> RAS0[20:24] + if( m_gendimm.m_bankcnt_u32 <= 4 ) { + l_RAS0_u32 |= ( ( RND( tRP ) - TD ) << 7 ); + } else { + l_RAS0_u32 |= ( ( RND( tRP ) + 1 - TD ) << 7 ); + } + + /* + * RAS Timer 1 + */ + // TiRAPtA = AL + BL/2 - 2 + RND(tRTP + tRP) -> RAS1[0:4] + l_RAS1_u32 = ( ( AL + BL/2 - 2 + RND( tRTP + tRP ) - TD ) << 27 ); + // TiWAPtA = CL + AL + BL/2 - 1 + RND(tWR + tRP) -> RAS1[5:9] + l_RAS1_u32 |= ( ( CL + AL + BL/2 - 1 + RND( tWR + tRP ) - TD ) << 22 ); + // TiAtARk = tRRD -> RAS1[10:14] + l_RAS1_u32 |= ( ( RND( tRRD ) - TD ) << 17 ); + // TiAtABk = tRC -> RAS1[15:19] + l_RAS1_u32 |= ( ( RND( tRC ) - TD ) << 12 ); + // TiAtRW = tRCD -> RAS1[20:24] + l_RAS1_u32 |= ( ( RND( tRCD ) - TD ) << 7 ); + // TiSAtARk Win = 4 * tRRD + 2 -> RAS1[25:29] + l_RAS1_u32 |= ( ( RND( 4 * tRRD ) + 2 - TD ) << 2 ); + + /* + * CAS Timer 0 + */ + // TiRtRRk = BL/2 -> CAS0[0:4] + l_CAS0_u32 = ( ( BL/2 - TD ) << 27 ); + // TiRtRDm = BL/2 + 1 -> CAS0[5:9] + l_CAS0_u32 |= ( ( BL/2 + 1 - TD ) << 22 ); + // TiRtRSy = BL/2 + RRMux -> CAS0[10:14] + l_CAS0_u32 |= ( ( BL/2 + rst->RRMux - TD ) << 17 ); + // TiWtRRk = CL - 1 + BL/2 + tWTR ->CAS0[15:19] + l_CAS0_u32 |= ( ( CL - 1 + BL/2 + RND( tWTR ) - TD ) << 12 ); + // TiWtRDm = BL/2 + 1 -> CAS0[20:24] + l_CAS0_u32 |= ( ( BL/2 + 1 - TD ) << 7 ); + // TiWtRSy = BL/2 + WRMux -> CAS0[25:29] + l_CAS0_u32 |= ( ( BL/2 + rst->WRMux - TD ) << 2 ); + + /* + * CAS Timer 1 + */ + // TiWtWRk = BL/2 -> CAS1[0:4] + l_CAS1_u32 = ( ( BL/2 - TD ) << 27 ); + // TiWtWDm = BL/2 + 1 -> CAS1[5:9] + l_CAS1_u32 |= ( ( BL/2 + 1 - TD ) << 22 ); + // TiWtWSy = BL/2 + WWMux -> CAS1[10:14] + l_CAS1_u32 |= ( ( BL/2 + rst->WWMux - TD ) << 17 ); + // TiRtWRk = BL/2 + 2 -> CAS1[15:19] + l_CAS1_u32 |= ( ( BL/2 + 2 + rst->CAS1Dly0 - TD ) << 12 ); + // TiRtWDm = BL/2 + 2 -> CAS1[20:24] + l_CAS1_u32 |= ( ( BL/2 + 2 + rst->CAS1Dly1 - TD ) << 7 ); + // TiRtWSy = BL/2 + RWMux + 1 -> CAS1[25:29] + l_CAS1_u32 |= ( ( BL/2 + rst->RWMux + 1 - TD ) << 2 ); + + store32_ci( RASTimer0_R, l_RAS0_u32 ); + store32_ci( RASTimer1_R, l_RAS1_u32 ); + store32_ci( CASTimer0_R, l_CAS0_u32 ); + store32_ci( CASTimer1_R, l_CAS1_u32 ); + + /* + * Mem Refresh Control register + */ + l_MemRfshCntl_u32 = ( ( ( tREF / tCK ) / 16 ) << 23 ); + l_MemRfshCntl_u32 |= ( ( RND( tRFC ) - TD ) << 8 ); + store32_ci( MemRfshCntl_R, l_MemRfshCntl_u32 ); + + /* + * setup DmXCnfg registers + */ + store32_ci( Dm0Cnfg_R, (uint32_t) 0x0 ); + store32_ci( Dm1Cnfg_R, (uint32_t) 0x0 ); + store32_ci( Dm2Cnfg_R, (uint32_t) 0x0 ); + store32_ci( Dm3Cnfg_R, (uint32_t) 0x0 ); + + /* + * create DmCnfg & UsrCnfg values out of group data + */ + l_UsrCnfg_u32 = 0; + for( i = 0; i < m_dgrcnt_u32; i++ ) { + l_DmCnfg_u32 = ( m_dgrptr[i]->m_add2g_u32 << 27 ); + l_DmCnfg_u32 |= ( m_dgrptr[i]->m_sub2g_u32 << 19 ); + l_DmCnfg_u32 |= ( m_dgrptr[i]->m_memmd_u32 << 12 ); + l_DmCnfg_u32 |= ( m_dgrptr[i]->m_start_u32 << 3 ); + l_DmCnfg_u32 |= ( m_dgrptr[i]->m_ss_u32 << 1 ); + l_DmCnfg_u32 |= IBIT(31); // enable bit + + /* + * write value into DmXCnfg registers + */ + for( j = 0; j < m_dgrptr[i]->m_dcnt_u32; j++ ) { + t0 = m_dgrptr[i]->m_dptr[j]->m_bank_u32; + t1 = Dm0Cnfg_R + 0x10 * t0; + + if( load32_ci( t1 ) == 0 ) { + store32_ci( t1, l_DmCnfg_u32 ); + l_UsrCnfg_u32 |= + ( m_dgrptr[i]->m_csmode_u32 << ( 30 - 2 * t0 ) ); + } + + } + + } + + /* + * setup UsrCnfg register + *- cs mode is selected above + *- Interleave on L2 cache line + *- Usually closed page policy + */ + l_UsrCnfg_u32 |= IBIT(8); // interleave on L2 cache line + l_UsrCnfg_u32 &= ~IBIT(9); // usually closed + l_UsrCnfg_u32 |= IBIT(10); + store32_ci( UsrCnfg_R, l_UsrCnfg_u32 ); + + /* + * Memory Arbiter Weight Register + */ + // CohWt -> MemAWt[0:1] + l_MemArbWt_u32 = ( (uint32_t) 1 << 30 ); + // NCohWt -> MemAWt[2:3] + l_MemArbWt_u32 |= ( (uint32_t) 1 << 28 ); + // ScrbWt -> MemAWt[4:5] + l_MemArbWt_u32 |= ( (uint32_t) 0 << 26 ); + store32_ci( MemArbWt_R, l_MemArbWt_u32 ); + + /* + * misc fixed register setup + */ + store32_ci( ODTCntl_R, rst->ODTCntl ); + store32_ci( IOPadCntl_R, rst->IOPadCntl ); + store32_ci( MemPhyModeCntl_R, rst->MemPhyModeCntl ); + store32_ci( OCDCalCntl_R, rst->OCDCalCntl ); + store32_ci( OCDCalCmd_R, rst->OCDCalCmd ); + + /* + * CK Delay registers + */ + store32_ci( CKDelayL_R, rst->CKDelayL ); + store32_ci( CKDelayU_R, rst->CKDelayU ); + + /* + * read/write strobe delays + */ + store32_ci( ByteWrClkDelC0B00_R, rst->ByteWrClkDel[ 0] ); + store32_ci( ByteWrClkDelC0B01_R, rst->ByteWrClkDel[ 1] ); + store32_ci( ByteWrClkDelC0B02_R, rst->ByteWrClkDel[ 2] ); + store32_ci( ByteWrClkDelC0B03_R, rst->ByteWrClkDel[ 3] ); + store32_ci( ByteWrClkDelC0B04_R, rst->ByteWrClkDel[ 4] ); + store32_ci( ByteWrClkDelC0B05_R, rst->ByteWrClkDel[ 5] ); + store32_ci( ByteWrClkDelC0B06_R, rst->ByteWrClkDel[ 6] ); + store32_ci( ByteWrClkDelC0B07_R, rst->ByteWrClkDel[ 7] ); + store32_ci( ByteWrClkDelC0B16_R, rst->ByteWrClkDel[16] ); + store32_ci( ByteWrClkDelC0B08_R, rst->ByteWrClkDel[ 8] ); + store32_ci( ByteWrClkDelC0B09_R, rst->ByteWrClkDel[ 9] ); + store32_ci( ByteWrClkDelC0B10_R, rst->ByteWrClkDel[10] ); + store32_ci( ByteWrClkDelC0B11_R, rst->ByteWrClkDel[11] ); + store32_ci( ByteWrClkDelC0B12_R, rst->ByteWrClkDel[12] ); + store32_ci( ByteWrClkDelC0B13_R, rst->ByteWrClkDel[13] ); + store32_ci( ByteWrClkDelC0B14_R, rst->ByteWrClkDel[14] ); + store32_ci( ByteWrClkDelC0B15_R, rst->ByteWrClkDel[15] ); + store32_ci( ByteWrClkDelC0B17_R, rst->ByteWrClkDel[17] ); + store32_ci( ReadStrobeDelC0B00_R, rst->ReadStrobeDel[ 0] ); + store32_ci( ReadStrobeDelC0B01_R, rst->ReadStrobeDel[ 1] ); + store32_ci( ReadStrobeDelC0B02_R, rst->ReadStrobeDel[ 2] ); + store32_ci( ReadStrobeDelC0B03_R, rst->ReadStrobeDel[ 3] ); + store32_ci( ReadStrobeDelC0B04_R, rst->ReadStrobeDel[ 4] ); + store32_ci( ReadStrobeDelC0B05_R, rst->ReadStrobeDel[ 5] ); + store32_ci( ReadStrobeDelC0B06_R, rst->ReadStrobeDel[ 6] ); + store32_ci( ReadStrobeDelC0B07_R, rst->ReadStrobeDel[ 7] ); + store32_ci( ReadStrobeDelC0B16_R, rst->ReadStrobeDel[16] ); + store32_ci( ReadStrobeDelC0B08_R, rst->ReadStrobeDel[ 8] ); + store32_ci( ReadStrobeDelC0B09_R, rst->ReadStrobeDel[ 9] ); + store32_ci( ReadStrobeDelC0B10_R, rst->ReadStrobeDel[10] ); + store32_ci( ReadStrobeDelC0B11_R, rst->ReadStrobeDel[11] ); + store32_ci( ReadStrobeDelC0B12_R, rst->ReadStrobeDel[12] ); + store32_ci( ReadStrobeDelC0B13_R, rst->ReadStrobeDel[13] ); + store32_ci( ReadStrobeDelC0B14_R, rst->ReadStrobeDel[14] ); + store32_ci( ReadStrobeDelC0B15_R, rst->ReadStrobeDel[15] ); + store32_ci( ReadStrobeDelC0B17_R, rst->ReadStrobeDel[17] ); + + /* + * Mem Bus Configuration + * initial setup used in auto calibration + * final values will be written after + * auto calibration has finished + */ + l_MemBusCnfg_u32 = rst->MemBusCnfg; + +/* values calculation has been dropped, static values are used instead + // WdbRqDly = 2 * (CL - 3) (registered DIMMs) -> MBC[16:19] + l_MemBusCnfg_u32 += ( ( 2 * ( CL - 3 ) ) << 12 ); + // RdOEOnDly = 0 (typically) + l_MemBusCnfg_u32 += ( ( 0 ) << 8 ); + // RdOEOffDly = (2 * CL) - 4 -> MBC[24:27] + // NOTE: formula is not working, changed to: + // RdOEOffDly = (2 * CL) - 1 + l_MemBusCnfg_u32 += ( ( ( 2 * CL ) - 1 ) << 4 ); +*/ + + store32_ci( MemBusCnfg_R, l_MemBusCnfg_u32 ); + store32_ci( MemBusCnfg2_R, rst->MemBusCnfg & (uint32_t) 0xf0000000 ); + + /* + * reset verniers registers + */ + store32_ci( RstLdEnVerniersC0_R, 0x0 ); + store32_ci( RstLdEnVerniersC1_R, 0x0 ); + store32_ci( RstLdEnVerniersC2_R, 0x0 ); + store32_ci( RstLdEnVerniersC3_R, 0x0 ); + store32_ci( ExtMuxVernier0_R, 0x0 ); + store32_ci( ExtMuxVernier1_R, 0x0 ); + + /* + * Queue Configuration + */ + store32_ci( MemRdQCnfg_R, rst->MemRdQCnfg ); + store32_ci( MemWrQCnfg_R, rst->MemWrQCnfg ); + store32_ci( MemQArb_R, rst->MemQArb ); + store32_ci( MemRWArb_R, rst->MemRWArb ); + + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + #endif + + /* + * start up clocks & wait for pll2 to stabilize + */ + #ifdef U4_INFO + printf( " [start DDR clock : ]" ); + #endif + + store32_ci( MemModeCntl_R, IBIT(0) | IBIT(8) ); + dly( 50000000 ); + + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + + #endif + + /* + * memory initialization sequence + */ + #ifdef U4_INFO + printf( " [memory init : ]" ); + #endif + u4_MemInitSequence( tRP, tWR, tRFC, CL, tCK, TD ); + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + #endif + + /* + * start ECC before auto calibration to enable ECC bytelane + */ + store32_ci( MCCR_R, IBIT(0) ); + dly( 15000000 ); + + /* + * start up auto calibration + */ + #ifdef U4_INFO + printf( " [auto calibration: ]\b" ); + #endif + + /* + * start auto calibration + */ + l_acerr_i32 = 0; + do { + progbar(); + + l_ac_i32 = u4_auto_calib( &l_ac_st ); + + if( l_ac_i32 != 0 ) { + l_acerr_i32++; + } + + dly( 15000000 ); + } while( ( l_ac_i32 != 0 ) && + ( l_acerr_i32 <= MAX_ACERR ) ); + + if( l_acerr_i32 > MAX_ACERR ) { + #ifdef U4_INFO + printf( "\b\b\bERR\r\n" ); + #endif + return RET_ERR; + } + + /* + * insert auto calibration results + */ + store32_ci( MemBusCnfg_R, l_ac_st.m_MemBusCnfg_u32 ); + store32_ci( MemBusCnfg2_R, l_ac_st.m_MemBusCnfg2_u32 ); + store32_ci( RstLdEnVerniersC0_R, l_ac_st.m_RstLdEnVerniers_pu32[0] ); + store32_ci( RstLdEnVerniersC1_R, l_ac_st.m_RstLdEnVerniers_pu32[1] ); + store32_ci( RstLdEnVerniersC2_R, l_ac_st.m_RstLdEnVerniers_pu32[2] ); + store32_ci( RstLdEnVerniersC3_R, l_ac_st.m_RstLdEnVerniers_pu32[3] ); + + /* + * insert final timing value into MemRWArb + */ + l_MemRWArb_u32 = ( ( l_ac_st.m_MemBusCnfg_u32 >> 28 /*RdMacDel*/) + 1 ); + l_MemRWArb_u32 *= 10; // needed for rounding + l_MemRWArb_u32 /= 2; // due to spec + l_MemRWArb_u32 += 9; // round up + l_MemRWArb_u32 /= 10; // value is rounded now + l_MemRWArb_u32 = l_MemRWArb_u32 + 6 - WL - TD; + l_MemRWArb_u32 |= rst->MemRWArb; + store32_ci( MemRWArb_R, l_MemRWArb_u32 ); + + progbar(); + dly( 15000000 ); + + /* + * do initial scrubbing + */ + *f_ecc_pt = u4_InitialScrub(); + + switch( f_ecc_pt->m_err_i32 ) { + case RET_OK: { + #ifdef U4_INFO + printf( "\b\bOK\r\n" ); + #endif + break; + } + + case RET_ACERR_CE: { + #ifdef U4_INFO + printf( "\b\b\b\bWEAK][correctable errors during scrub (%u)]\r\n", + f_ecc_pt->m_cecnt_u32 ); + #endif + break; + } + + case RET_ACERR_UEWT: + case RET_ACERR_UE: { + #ifdef U4_INFO + printf( "\b\b\bERR][uncorrectable errors during scrub (%u)]\r\n", + f_ecc_pt->m_uecnt_u32 ); + #endif + return RET_ACERR_UE; + } + + } + + /* + * start continuous background scrub + */ + #ifdef U4_INFO + printf( " [background scrub: ]" ); + #endif + + u4_Scrub( BACKGROUND_SCRUB, 0, NULL ); + + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + #endif + + /* + * finally clear API Exception register + * (read to clear) + */ + load32_ci( APIExcp_R ); + + return RET_OK; +} + +#undef RND + +#if 0 +void +u4_memtest(uint8_t argCnt, char *pArgs[], uint64_t flags) +{ + #define TEND 99 + #define TCHK 100 + static const uint64_t _2GB = (uint64_t) 0x80000000; + static const uint64_t _start = (uint64_t) 0x08000000; // 128Mb + static const uint64_t _bsize = (uint64_t) 0x08000000; // 128MB + static const uint64_t _line = (uint64_t) 128; + static const uint64_t _256MB = (uint64_t) 0x10000000; + + static const uint64_t PATTERN[] = { + 0x9090909090909090, 0x0020002000200020, + 0x0c0c0c0c0c0c0c0c, 0x8080808080808080, + 0x1004010004001041, 0x0000000000000000 + }; + + uint64_t mend = (uint64_t) 0x200000000;//m_memsize_u64; + uint64_t numblocks = ( mend - _start ) / _bsize; // 128Mb blocks + uint64_t numlines = _bsize / _line; + uint64_t tstate = 0; + uint64_t tlast = 0; + uint64_t pidx = 0; + uint64_t rotr = 0; + uint64_t rotl = 0; + uint64_t block; + uint64_t line; + uint64_t addr; + uint64_t i; + uint64_t check = 0; + uint64_t dcnt; + uint64_t uerr = 0; + uint64_t cerr = 0; + uint64_t merr = 0; + char c; + + printf( "\n\nU4 memory test" ); + printf( "\n--------------" ); + + /* + * mask out UEC & CEC + */ + or32_ci( MCCR_R, IBIT(6) | IBIT(7) ); + + while( PATTERN[pidx] ) { + + switch( tstate ) + { + case 0: { + printf( "\npattern fill 0x%08X%08X: ", (uint32_t) (PATTERN[pidx] >> 32), (uint32_t) PATTERN[pidx] ); + + /* + * first switch lines, then blocks. This way the CPU + * is not able to cache data + */ + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + *( (uint64_t *) addr ) = PATTERN[pidx]; + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + printf( "*" ); + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + check = PATTERN[pidx]; + tlast = 0; + tstate = TCHK; + } break; + + case 1: { + uint64_t one; + + /* + * new check pattern + + */ + one = ( ( check & 0x1 ) != 0 ); + check >>= 1; + if( one ) { + check |= 0x8000000000000000; + } + + printf( "\nrotate right 0x%08X%08X: ", (uint32_t) (check >> 32), (uint32_t) check ); + + /* + * first switch lines, then blocks. This way the CPU + * is not able to cache data + */ + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + *( (uint64_t *) addr ) >>= 1; + + if( one ) { + *( (uint64_t *) addr ) |= + (uint64_t) 0x8000000000000000; + } + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + printf( "*" ); + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + tlast = 1; + tstate = TCHK; + } break; + + case 2: { + + if( rotr < 6 ) { + rotr++; + tstate = 1; + } else { + rotr = 0; + tstate = 3; + } + + } break; + + case 3: { + /* + * new check pattern + */ + check ^= (uint64_t) ~0; + + printf( "\ninverting 0x%08X%08X: ", (uint32_t) (check >> 32), (uint32_t) check ); + + /* + * first switch lines, then blocks. This way the CPU + * is not able to cache data + */ + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + *( (uint64_t *) addr ) ^= (uint64_t) ~0; + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + printf( "*" ); + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + tlast = 3; + tstate = TCHK; + } break; + + case 4: { + uint64_t one; + + /* + * new check pattern + */ + one = ( ( check & 0x8000000000000000 ) != 0 ); + check <<= 1; + if( one ) { + check |= 0x1; + } + + printf( "\nrotate left 0x%08X%08X: ", (uint32_t) (check >> 32), (uint32_t) check ); + + /* + * first switch lines, then blocks. This way the CPU + * is not able to cache data + */ + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + *( (uint64_t *) addr ) <<= 1; + + if( one ) { + *( (uint64_t *) addr ) |= + (uint64_t) 0x1; + } + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + printf( "*" ); + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + tlast = 4; + tstate = TCHK; + } break; + + case 5: { + + if( rotl < 6 ) { + rotl++; + tstate = 4; + } else { + rotl = 0; + tstate = 6; + } + + } break; + + case 6: { + /* + * new check pattern + */ + check *= ~check; + printf( "\nmultiply 0x%08X%08X: ", (uint32_t) (check >> 32), (uint32_t) check ); + + /* + * first switch lines, then blocks. This way the CPU + * is not able to cache data + */ + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + *( (uint64_t *) addr ) *= ~( *( (uint64_t *) addr ) ); + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + printf( "*" ); + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + tlast = TEND - 1; + tstate = TCHK; + } break; + + case TEND: { + pidx++; + tstate = 0; + } break; + + case TCHK: { + uint64_t err; + /* + * check data + */ + printf( "\nchecking : " ); + + for( line = 0, dcnt = 0; line < numlines; line++ ) { + + for( block = 0; block < numblocks; block++ ) { + + for( i = 0; i < _line; i += 8 ) { + addr = _start + + ( block * _bsize ) + + ( line * _line ) + + i; + + if( addr >= _2GB ) { + addr += _2GB; + } + + err = ( *( (uint64_t *) addr ) != check ); + + if( err ) { + merr++; + } + + /* + * print out a dot every 256Mb + */ + dcnt += 8; + if( dcnt == _256MB ) { + dcnt = 0; + + if( err ) { + printf( "X" ); + } else { + printf( "*" ); + } + + if( io_getchar( &c ) ) { + goto mtend; + } + + } + + } + + } + + } + + err = (uint64_t) load32_ci( MEAR1_R ); + uerr += ( err >> 24 ) & (uint64_t) 0xff; + cerr += ( err >> 16 ) & (uint64_t) 0xff; + + printf( " (UE: %02llX, CE: %02llX)", ( err >> 24 ) & (uint64_t) 0xff, ( err >> 16 ) & (uint64_t) 0xff ); + + tstate = tlast + 1; + tlast = TCHK; + } break; + + } + + } + +mtend: + printf( "\n\nmemory test results" ); + printf( "\n-------------------" ); + printf( "\nuncorrectable errors: %u", (uint32_t) uerr ); + printf( "\ncorrectable errors : %u", (uint32_t) cerr ); + printf( "\nread/write errors : %u\n", (uint32_t) merr ); + + and32_ci( MCCR_R, ~( IBIT(6) | IBIT(7) ) ); +} +#endif + +#if 0 +void +u4_dump(uint8_t argCnt, char *pArgs[], uint64_t flags) +{ + printf( "\r\n*** u4 register dump ***\r\n\n" ); + printf( "register (offset): value\r\n" ); + printf( "----------------------------------\r\n" ); + printf( "Clock Control (0x%04X): 0x%08X\r\n", (uint16_t) ClkCntl_R, load32_ci( ClkCntl_R ) ); + printf( "PLL2 Control (0x%04X): 0x%08X\r\n", (uint16_t) PLL2Cntl_R, load32_ci( PLL2Cntl_R ) ); + printf( "MemModeCntl (0x%04X): 0x%08X\r\n", (uint16_t) MemModeCntl_R, load32_ci( MemModeCntl_R ) ); + printf( "RASTimer0 (0x%04X): 0x%08X\r\n", (uint16_t) RASTimer0_R, load32_ci( RASTimer0_R ) ); + printf( "RASTimer1 (0x%04X): 0x%08X\r\n", (uint16_t) RASTimer1_R, load32_ci( RASTimer1_R ) ); + printf( "CASTimer0 (0x%04X): 0x%08X\r\n", (uint16_t) CASTimer0_R, load32_ci( CASTimer0_R ) ); + printf( "CASTimer1 (0x%04X): 0x%08X\r\n", (uint16_t) CASTimer1_R, load32_ci( CASTimer1_R ) ); + printf( "MemRfshCntl (0x%04X): 0x%08X\r\n", (uint16_t) MemRfshCntl_R, load32_ci( MemRfshCntl_R ) ); + printf( "Dm0Cnfg (0x%04X): 0x%08X\r\n", (uint16_t) Dm0Cnfg_R, load32_ci( Dm0Cnfg_R ) ); + printf( "Dm1Cnfg (0x%04X): 0x%08X\r\n", (uint16_t) Dm1Cnfg_R, load32_ci( Dm1Cnfg_R ) ); + printf( "Dm2Cnfg (0x%04X): 0x%08X\r\n", (uint16_t) Dm2Cnfg_R, load32_ci( Dm2Cnfg_R ) ); + printf( "Dm3Cnfg (0x%04X): 0x%08X\r\n", (uint16_t) Dm3Cnfg_R, load32_ci( Dm3Cnfg_R ) ); + printf( "UsrCnfg (0x%04X): 0x%08X\r\n", (uint16_t) UsrCnfg_R, load32_ci( UsrCnfg_R ) ); + printf( "MemArbWt (0x%04X): 0x%08X\r\n", (uint16_t) MemArbWt_R, load32_ci( MemArbWt_R ) ); + printf( "ODTCntl (0x%04X): 0x%08X\r\n", (uint16_t) ODTCntl_R, load32_ci( ODTCntl_R ) ); + printf( "IOPadCntl (0x%04X): 0x%08X\r\n", (uint16_t) IOPadCntl_R, load32_ci( IOPadCntl_R ) ); + printf( "MemPhyMode (0x%04X): 0x%08X\r\n", (uint16_t) MemPhyModeCntl_R, load32_ci( MemPhyModeCntl_R ) ); + printf( "OCDCalCntl (0x%04X): 0x%08X\r\n", (uint16_t) OCDCalCntl_R, load32_ci( OCDCalCntl_R ) ); + printf( "OCDCalCmd (0x%04X): 0x%08X\r\n", (uint16_t) OCDCalCmd_R, load32_ci( OCDCalCmd_R ) ); + printf( "CKDelayL (0x%04X): 0x%08X\r\n", (uint16_t) CKDelayL_R, load32_ci( CKDelayL_R ) ); + printf( "CKDelayH (0x%04X): 0x%08X\r\n", (uint16_t) CKDelayU_R, load32_ci( CKDelayU_R ) ); + printf( "MemBusCnfg (0x%04X): 0x%08X\r\n", (uint16_t) MemBusCnfg_R, load32_ci( MemBusCnfg_R ) ); + printf( "MemBusCnfg2 (0x%04X): 0x%08X\r\n", (uint16_t) MemBusCnfg2_R, load32_ci( MemBusCnfg2_R ) ); + printf( "MemRdQCnfg (0x%04X): 0x%08X\r\n", (uint16_t) MemRdQCnfg_R, load32_ci( MemRdQCnfg_R ) ); + printf( "MemWrQCnfg (0x%04X): 0x%08X\r\n", (uint16_t) MemWrQCnfg_R, load32_ci( MemWrQCnfg_R ) ); + printf( "MemQArb (0x%04X): 0x%08X\r\n", (uint16_t) MemQArb_R, load32_ci( MemQArb_R ) ); + printf( "MemRWArb (0x%04X): 0x%08X\r\n", (uint16_t) MemRWArb_R, load32_ci( MemRWArb_R ) ); + printf( "ByteWrClkDel (0x%04X): 0x%08X\r\n", (uint16_t) ByteWrClkDelC0B00_R, load32_ci( ByteWrClkDelC0B00_R ) ); + printf( "ReadStrobeDel (0x%04X): 0x%08X\r\n", (uint16_t) ReadStrobeDelC0B00_R, load32_ci( ReadStrobeDelC0B00_R ) ); + printf( "RstLdEnVerC0 (0x%04X): 0x%08X\r\n", (uint16_t) RstLdEnVerniersC0_R, load32_ci( RstLdEnVerniersC0_R ) ); + printf( "RstLdEnVerC1 (0x%04X): 0x%08X\r\n", (uint16_t) RstLdEnVerniersC1_R, load32_ci( RstLdEnVerniersC1_R ) ); + printf( "RstLdEnVerC2 (0x%04X): 0x%08X\r\n", (uint16_t) RstLdEnVerniersC2_R, load32_ci( RstLdEnVerniersC2_R ) ); + printf( "RstLdEnVerC3 (0x%04X): 0x%08X\r\n", (uint16_t) RstLdEnVerniersC3_R, load32_ci( RstLdEnVerniersC3_R ) ); + printf( "APIMemRdCfg (0x%04X): 0x%08X\r\n", (uint16_t) APIMemRdCfg_R, load32_ci( APIMemRdCfg_R ) ); + printf( "scrub start (0x%04X): 0x%08X\r\n", (uint16_t) MSRSR_R, load32_ci( MSRSR_R ) ); + printf( "scrub end (0x%04X): 0x%08X\r\n", (uint16_t) MSRER_R, load32_ci( MSRER_R ) ); +} +#endif + +static int32_t +u4_memBegin( eccerror_t *f_ecc_pt ) +{ + int32_t i; + + #ifdef U4_INFO + printf( "\r\n" ); + printf( "U4 DDR2 memory controller setup V%u.%u\r\n", + VER, SUBVER ); + printf( "------------------------------------\r\n" ); + printf( "> detected board : " ); + + if( IS_MAUI ) { + printf( "MAUI" ); + } else if( IS_BIMINI ) { + printf( "BIMINI" ); + } else if( IS_KAUAI ) { + printf( "KAUAI" ); + } else { + printf( "unknown!" ); + return RET_ERR; + } + #endif + + do { + /* + * initialize variables + */ + m_memsize_u64 = 0; + m_dcnt_u32 = 0; + m_dgrcnt_u32 = 0; + m_dclidx_u32 = 0; + + for( i = 0; i < NUM_SLOTS; i++ ) { + m_dptr[i] = NULL; + memset( ( void * ) &m_dimm[i], 0, sizeof( dimm_t ) ); + } + + for( i = 0; i < MAX_DGROUPS; i++ ) { + m_dgrptr[i] = NULL; + memset( ( void * ) &m_dgroup[i], 0, sizeof( dimm_t ) ); + } + + /* + * start configuration + */ + #ifdef U4_INFO + printf( "\r\n> detected DIMM configuration : " ); + #endif + + i = ddr2_readSPDs(); + + if( i != RET_OK ) { + #ifdef U4_INFO + printf( "\r\n-------------------------------------------------------------" ); + printf( "\r\n switching off memory bank(s) due to SPD integrity failure" ); + printf( "\r\n-------------------------------------------------------------\r\n" ); + #endif + } + + } while( i != RET_OK ); + + /* + * check DIMM configuration + */ + if( ddr2_setupDIMMcfg() != RET_OK ) { + #ifdef U4_INFO + printf( "> initialization failure.\r\n" ); + #endif + return RET_ERR; + } + + /* + * create DIMM groups + */ + u4_setupDIMMgroups(); + + /* + * start configuration of u4 + */ + u4_calcDIMMcnfg(); + + if( u4_calcDIMMmemmode() != RET_OK ) { + #ifdef U4_INFO + printf( "> initialization failure.\r\n" ); + #endif + return RET_ERR; + } + + #ifdef U4_INFO + printf( "%uMb @ %uMhz, CL %u\r\n", + (uint32_t) ( m_memsize_u64 / 0x100000 ), + m_gendimm.m_speed_pu32[m_dclidx_u32], + m_gendimm.m_clval_pu32[m_dclidx_u32] ); + + printf( "> initializing memory :\r\n" ); + #endif + + if( u4_setup_core_clock() != RET_OK ) { + #ifdef U4_INFO + printf( "> initialization failure.\r\n" ); + #endif + return RET_ERR; + } + + i = u4_start( f_ecc_pt ); + if( i != RET_OK ) { + #ifdef U4_INFO + printf( "> initialization failure.\r\n" ); + #endif + return i; + } + + #ifdef U4_INFO + printf( " [flush cache : ]" ); + #endif + + flush_cache( 0x0, L2_CACHE_SIZE ); + + #ifdef U4_INFO + printf( "\b\b\bOK\r\n" ); + printf( "> initialization complete.\r\n" ); + #endif + +#ifdef U4_SHOW_REGS + u4_dump(0,0,0); +#endif + + return RET_OK; +} + + +#if 0 +static int32_t scrubstarted = 0; +void +u4_scrubStart(uint8_t argCnt, char *pArgs[], uint64_t flags ) +{ + scrubstarted = 1; + + /* + * setup scrub parameters + */ + store32_ci( MSCR_R, 0 ); // stop scrub + store32_ci( MSRSR_R, 0x0 ); // set start + store32_ci( MSRER_R, 0x1c ); // set end + store32_ci( MSPR_R, 0x0 ); // set pattern + + /* + * clear out ECC error registers + */ + store32_ci( MEAR0_R, 0x0 ); + store32_ci( MEAR1_R, 0x0 ); + store32_ci( MESR_R, 0x0 ); + + /* + * Setup Scrub Type + */ + store32_ci( MSCR_R, IBIT(1) ); + printf( "\r\nscrub started\r\n" ); +} +#endif + +#if 0 +void +u4_scrubEnd(uint8_t argCnt, char *pArgs[], uint64_t flags ) +{ + store32_ci( MSCR_R, 0 ); // stop scrub + scrubstarted = 0; + printf( "\r\nscrub stopped\r\n" ); +} +#endif + +#if 0 +void +u4_memwr(uint8_t argCnt, char *pArgs[], uint64_t flags ) +{ + uint32_t i; + uint32_t v = 0; + + for( i = 0; i < 0x200; i += 4 ) { + + if( ( i & 0xf ) == 0 ) { + v = ~v; + } + + store32_ci( i, v ); + } + +} +#endif + +void +u4memInit() +{ + static uint32_t l_isInit_u32 = 0; + eccerror_t l_ecc_t; + int32_t ret; + + /* + * do not initialize memory more than once + */ + if( l_isInit_u32 ) { + #ifdef U4_INFO + printf( "\r\n\nmemory already initialized\r\n" ); + #endif + return; + } else { + l_isInit_u32 = 1; + } + + /* + * enable all DIMM banks on first run + */ + m_bankoff_u32 = 0; + + do { + ret = u4_memBegin( &l_ecc_t ); + + if( ret < RET_ERR ) { + uint32_t l_bank_u32 = l_ecc_t.m_rank_u32 / 2; + printf( "\r\n-----------------------------------------------------" ); + printf( "\r\n switching off memory bank %u due to memory failure", l_bank_u32 ); + printf( "\r\n-----------------------------------------------------" ); + m_bankoff_u32 |= ( 1 << l_bank_u32 ); + } + + } while( ret < RET_ERR ); + +} diff --git a/qemu/roms/SLOF/board-js2x/romfs/boot_rom.ffs b/qemu/roms/SLOF/board-js2x/romfs/boot_rom.ffs new file mode 100644 index 000000000..fe54cb673 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/romfs/boot_rom.ffs @@ -0,0 +1,22 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2011 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ + +# FFile-Name Real Filename Flags ROM-Offset i/a +#--------------|-------------------------------|---------------|-------------- +header romfs/header.img 0 0 +stage1 board-js2x/llfw/stage1.bin 1 0x100 +xvect slof/xvect.bin 0 0 +ofw_main board-js2x/slof/paflof 0 0 +stageS board-js2x/llfw/stageS.bin 0 0 +bootinfo board-js2x/llfw/Cboot.bin 0 0 +rtas board-js2x/rtas/rtas.bin 0 0 +snk clients/net-snk.client 0 0 diff --git a/qemu/roms/SLOF/board-js2x/rtas/Makefile b/qemu/roms/SLOF/board-js2x/rtas/Makefile new file mode 100644 index 000000000..5ab5c34c7 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/Makefile @@ -0,0 +1,89 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2008 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ + +include ../Makefile.dirs + +include $(TOPBRDDIR)/config +include $(TOPCMNDIR)/make.rules + + +LDFLAGS = -nostdlib +CPPFLAGS = -I. -I$(LIBCMNDIR)/libc/include -I$(LIBCMNDIR)/libipmi -I$(INCLBRDDIR) \ + -I$(INCLCMNDIR) -I$(RTASCMNDIR) -I$(INCLCMNDIR)/$(CPUARCH) +ASFLAGS = -Wa,-mregnames $(FLAG) +CFLAGS += -Wall -Wextra -O2 -msoft-float -ffreestanding $(FLAG) + +# Board specific RTAS files: +BOARD_SRC_ASM = +BOARD_SRC_C = rtas_flash.c rtas_board.c rtas_pci.c \ + rtas_out.c rtas_table.c +BOARD_SRCS = $(BOARD_SRC_ASM) $(BOARD_SRC_C) +BOARD_OBJ = $(BOARD_SRC_ASM:%.S=%.o) $(BOARD_SRC_C:%.c=%.o) $(BOARD_OCO:%.oco=%.o) +BOARD_OCO = i2c_bmc.oco ipmi_oem.oco + + +# Common RTAS files (from $(RTASCMNDIR) directory): +RTAS_SRC_ASM = rtas_entry.S rtas_common.S reloc.S +RTAS_SRC_C = rtas_call.c +RTAS_SRCS = $(RTAS_SRC_ASM) $(RTAS_SRC_C) +RTAS_OBJ = $(RTAS_SRC_ASM:%.S=%.o) $(RTAS_SRC_C:%.c=%.o) + +RTAS_FLASH_SRC = block_lists.c +RTAS_FLASH_OBJ = $(RTAS_FLASH_SRC:%.c=$(RTASCMNDIR)/flash/%.o) + +# Additional object files: +EXTRA_OBJ = ../llfw/hw.o ../../lib/libc.a ../../lib/libipmi.a + +OBJS = $(RTAS_OBJ:%=$(RTASCMNDIR)/%) $(BOARD_OBJ) $(EXTRA_OBJ) \ + $(RTAS_FLASH_OBJ) + + +all: Makefile.dep rtas.bin + +rtas.bin: rtas + $(OBJCOPY) -O binary $< $@ + +rtas: $(RTASCMNDIR)/rtas.lds $(OBJS) reloc_table.o + $(LD) $(LDFLAGS) -o $@ -T $(RTASCMNDIR)/rtas.lds $(OBJS) reloc_table.o + +reloc_table.o: $(TOOLSDIR)/gen_reloc_table $(OBJS) + $(TOOLSDIR)/create_reloc_table.sh --ld "$(ONLY_LD)" --ldflags "$(LDFLAGS)" \ + --lds "$(RTASCMNDIR)/rtas.lds" --objcopy "$(OBJCOPY)" $(OBJS) + +$(TOOLSDIR)/gen_reloc_table: $(TOOLSDIR)/gen_reloc_table.c + $(MAKE) -C $(TOOLSDIR) gen_reloc_table + +../../lib/libc.a: + $(MAKE) -C ../../lib + +clean: + $(MAKE) -C ../../lib clean + rm -f $(OBJS) reloc_table.o rtas rtas.bin + +distclean : clean + rm -f Makefile.dep + + +# Rules for creating the dependency file: +depend: + $(CC) -MM $(CPPFLAGS) $(CFLAGS) $(BOARD_SRCS) > Makefile.dep + $(CC) -MM $(CPPFLAGS) $(CFLAGS) $(RTAS_SRCS:%=$(RTASCMNDIR)/%) \ + | sed -e '/:/s,^,$(RTASCMNDIR)/,' >> Makefile.dep +Makefile.dep: + $(MAKE) depend + +# Include dependency file if available: +ifneq (,$(wildcard Makefile.dep)) +include Makefile.dep +endif +%.o: %.oco + cp -f $< $@ diff --git a/qemu/roms/SLOF/board-js2x/rtas/i2c_bmc.oco b/qemu/roms/SLOF/board-js2x/rtas/i2c_bmc.oco new file mode 100644 index 000000000..004e7f2e5 Binary files /dev/null and b/qemu/roms/SLOF/board-js2x/rtas/i2c_bmc.oco differ diff --git a/qemu/roms/SLOF/board-js2x/rtas/ipmi_oem.oco b/qemu/roms/SLOF/board-js2x/rtas/ipmi_oem.oco new file mode 100644 index 000000000..ae401eafe Binary files /dev/null and b/qemu/roms/SLOF/board-js2x/rtas/ipmi_oem.oco differ diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_board.c b/qemu/roms/SLOF/board-js2x/rtas/rtas_board.c new file mode 100644 index 000000000..7f7409d9f --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_board.c @@ -0,0 +1,218 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include "rtas_board.h" +#include +#include +#include +#include "libipmi.h" +#include + +void io_init(void); +short reg_get_flashside(void); +void rtas_init(void); + +typedef struct { + uint64_t r3; + uint64_t addr; + volatile uint64_t id; +} slave_t; + +volatile slave_t rtas_slave_interface; + +static void +rtas_slave_loop(volatile slave_t * pIface) +{ + uint64_t mask = pIface->id; + pIface->id = 0; + while (pIface->id != mask); { + int dly = 0x1000; + while (dly--); + } + pIface->id = 0; + asm volatile (" mr 3,%0 ; mtctr %1 ; bctr " + ::"r"(pIface->r3), "r"(pIface->addr)); +} + +void +rtas_fetch_slaves(rtas_args_t * pArgs) +{ + int retVal = 0; + int idx = 0; + uint32_t mask = pArgs->args[0] & 0xFFFFFFFE; + uint64_t *rtas_slave_loop_ptr = (uint64_t *)rtas_slave_loop; + while (mask) { + if (mask & 0x1) { + rtas_slave_interface.id = idx | 0x100; + *(int *) 0x3fc0 = (int)(unsigned long) &rtas_slave_interface; // r3 + *(int *) 0x3f80 = *rtas_slave_loop_ptr; // addr + *(int *) 0x3fa0 = idx | 0x100; // pid + while (rtas_slave_interface.id); + } + mask >>= 1; + idx++; + } + pArgs->args[pArgs->nargs] = retVal; +} + +void +rtas_start_cpu(rtas_args_t * pArgs) +{ + int retVal = 0; + int idx = pArgs->args[0]; // pid + rtas_slave_interface.r3 = pArgs->args[2]; // r3 + rtas_slave_interface.addr = pArgs->args[1]; // addr + asm(" sync "); + rtas_slave_interface.id = idx | 0x100; // pid + while (rtas_slave_interface.id); + pArgs->args[pArgs->nargs] = retVal; +} + +void +rtas_read_vpd(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = + bmc_read_vpd((uint8_t *) (uint64_t) pArgs->args[2], pArgs->args[1], + pArgs->args[0]); +} + +void +rtas_write_vpd(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = + bmc_write_vpd((uint8_t *) (uint64_t) pArgs->args[2], pArgs->args[1], + pArgs->args[0]); +} + +void +rtas_set_indicator(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = -1; +} + +void +rtas_event_scan(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = -1; +} + +void +rtas_stop_bootwatchdog(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = bmc_stop_bootwatchdog(); +} + +void +rtas_set_bootwatchdog(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = bmc_set_bootwatchdog(pArgs->args[0]); +} + +void +rtas_set_flashside(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = bmc_set_flashside(pArgs->args[0]); +} + +void +rtas_get_flashside(rtas_args_t * pArgs) +{ + int retVal = bmc_get_flashside(); + pArgs->args[pArgs->nargs] = retVal; +} + +void +rtas_flash_test(rtas_args_t * pArgs) +{ + pArgs->args[pArgs->nargs] = -1; +} + +void +rtas_system_reboot(rtas_args_t * pArgs) +{ + bmc_system_reboot(); + pArgs->args[pArgs->nargs] = -1; +} + +void +rtas_power_off(rtas_args_t * pArgs) +{ + bmc_power_off(); + pArgs->args[pArgs->nargs] = -1; +} + +void +rtas_get_blade_descr(rtas_args_t * pArgs) +{ + uint8_t *buffer = (uint8_t *) (uint64_t) pArgs->args[0]; + uint32_t maxlen = pArgs->args[1]; + uint32_t retlen = 0; + uint32_t retval = bmc_get_blade_descr(buffer, maxlen, &retlen); + pArgs->args[pArgs->nargs] = retlen; + pArgs->args[pArgs->nargs + 1] = retval; +} + +// for JS20 cannot read blade descr +static uint32_t +dummy_get_blade_descr(uint8_t *dst, uint32_t maxlen, uint32_t *len) +{ + // to not have a warning we need to do _something_ with *dst and maxlen... + *dst = *dst; + maxlen = maxlen; + *len = 0; + return -1; +} + +/* read flashside from register */ +short +reg_get_flashside(void) +{ + short retVal; + uint8_t val = load8_ci(0xf4003fe3); + if (val & 0x80) { + // temp + retVal = 1; + } else { + // perm + retVal = 0; + } + return retVal; +} + +void +rtas_init(void) +{ + io_init(); + if (u4Flag) { + bmc_system_reboot = ipmi_system_reboot; + bmc_power_off = ipmi_power_off; + bmc_set_flashside = ipmi_set_flashside; + bmc_get_flashside = reg_get_flashside; + bmc_stop_bootwatchdog = ipmi_oem_stop_bootwatchdog; + bmc_set_bootwatchdog = ipmi_oem_set_bootwatchdog; + bmc_read_vpd = ipmi_oem_read_vpd; + bmc_write_vpd = ipmi_oem_write_vpd; + bmc_get_blade_descr = ipmi_oem_get_blade_descr; + } else { + bmc_system_reboot = i2c_system_reboot; + bmc_power_off = i2c_power_off; + bmc_set_flashside = i2c_set_flashside; + bmc_get_flashside = i2c_get_flashside; + bmc_stop_bootwatchdog = i2c_stop_bootwatchdog; + bmc_set_bootwatchdog = i2c_set_bootwatchdog; + bmc_read_vpd = i2c_read_vpd; + bmc_write_vpd = i2c_write_vpd; + bmc_get_blade_descr = dummy_get_blade_descr; + } +} diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_board.h b/qemu/roms/SLOF/board-js2x/rtas/rtas_board.h new file mode 100644 index 000000000..06766e143 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_board.h @@ -0,0 +1,45 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef __RTAS_BOARD_H +#define __RTAS_BOARD_H + +#include + +extern volatile unsigned char u4Flag; + +void rtas_ibm_read_pci_config(rtas_args_t * pArgs); +void rtas_ibm_write_pci_config(rtas_args_t * pArgs); +void rtas_read_pci_config(rtas_args_t * pArgs); +void rtas_write_pci_config(rtas_args_t * pArgs); +void rtas_system_reboot(rtas_args_t * pArgs); +void rtas_power_off(rtas_args_t * pArgs); +void rtas_display_character(rtas_args_t * pArgs); +void rtas_flash_test(rtas_args_t * pArgs); +void rtas_ibm_update_flash_64_and_reboot(rtas_args_t * pArgs); +void rtas_set_indicator(rtas_args_t * pArgs); +void rtas_event_scan(rtas_args_t * pArgs); +void rtas_ibm_manage_flash_image(rtas_args_t * pArgs); +void rtas_ibm_validate_flash_image(rtas_args_t * pArgs); +void rtas_update_flash(rtas_args_t * pArgs); +void rtas_set_flashside(rtas_args_t * pArgs); +void rtas_get_flashside(rtas_args_t * pArgs); +void rtas_dump_flash(rtas_args_t * pArgs); +void rtas_start_cpu(rtas_args_t * pArgs); +void rtas_read_vpd(rtas_args_t * pArgs); +void rtas_write_vpd(rtas_args_t * pArgs); +void rtas_fetch_slaves(rtas_args_t * pArgs); +void rtas_stop_bootwatchdog(rtas_args_t * pArgs); +void rtas_get_blade_descr(rtas_args_t * pArgs); +void rtas_set_bootwatchdog(rtas_args_t * pArgs); + +#endif /* __RTAS_BOARD_H */ diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.c b/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.c new file mode 100644 index 000000000..189878da9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.c @@ -0,0 +1,614 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include "rtas_board.h" +#include +#include "rtas_flash.h" +#include +#include "product.h" +#include "calculatecrc.h" + +#undef DEBUG + +#ifdef DEBUG +#define dprintf(_x ...) printf(_x) +#else +#define dprintf(_x ...) +#endif + +static uint64_t size; +static uint64_t flashOffset; + +unsigned char manage_flash_buffer[BUFSIZE*2]; +unsigned long check_flash_image(unsigned long rombase, unsigned long length, + unsigned long start_crc); + +#ifdef DEBUG +static void +dump_blocklist(uint64_t *bl, int version) +{ + uint64_t bl_size; + uint8_t *addr = (uint8_t *)bl; + + if (version == 1) { + /* version 1 blocklist */ + bl_size = *bl & 0x00FFFFFFFFFFFFFFUL; + + } else { + bl_size = *bl; + } + + printf("\n\rblocklist_dump %lx", bl_size); + while (bl_size) { + unsigned int tmpCnt = bl_size; + unsigned char x; + if (tmpCnt > 8) + tmpCnt = 8; + printf("\n\r%08x: ", addr); + /* print hex */ + while (tmpCnt--) { + set_ci(); + x = *addr++; + clr_ci(); + printf("%02x ", x); + } + tmpCnt = bl_size; + if (tmpCnt > 8) + tmpCnt = 8; + bl_size -= tmpCnt; + /* reset addr ptr to print ascii */ + addr = addr - tmpCnt; + /* print ascii */ + while (tmpCnt--) { + set_ci(); + x = *addr++; + clr_ci(); + if ((x < 32) || (x >= 127)) { + /* non-printable char */ + x = '.'; + } + printf("%c", x); + } + } + printf("\r\n"); +} +#endif + +void +rtas_dump_flash(rtas_args_t *rtas_args) +{ + int retVal = 0; + unsigned int size = rtas_args->args[0]; + unsigned int offset = rtas_args->args[1]; + volatile unsigned char *flash = (volatile unsigned char *)FLASH; + + printf("\n\rflash_dump %x %x", size, offset); + flash += offset; + while (size) { + unsigned int tmpCnt = size; + unsigned char x; + if (tmpCnt > 16) + tmpCnt = 16; + printf("\n\r%p: ", flash); + /* print hex */ + while (tmpCnt--) { + set_ci(); + x = *flash++; + clr_ci(); + printf("%02x ", x); + } + tmpCnt = size; + if (tmpCnt > 16) + tmpCnt = 16; + size -= tmpCnt; + /* reset flash ptr to print ascii */ + flash = flash - tmpCnt; + /* print ascii */ + while (tmpCnt--) { + set_ci(); + x = *flash++; + clr_ci(); + if ((x < 32) || (x >= 127)) { + /* non-printable char */ + x = '.'; + } + printf("%c", x); + } + } + printf("\r\n"); + rtas_args->args[rtas_args->nargs] = retVal; +} + + +static void +print_block(int i) +{ + int counter = 8; + + while (counter--) + printf("\b"); + printf("%08x", i); +} + + + +/* To enter data mode after flash has been in programming mode + * a 0xFF has to be written */ +static void +enter_data_mode(void) +{ + volatile unsigned char *flash = (volatile unsigned char *)FLASH; + + set_ci(); + *flash = 0xFF; + eieio(); + clr_ci(); +} + + +static void +erase_flash_block(unsigned long offset) +{ + volatile unsigned char *flash = (volatile unsigned char *)FLASH; + + flash += offset; + set_ci(); + *flash = 0x20; + eieio(); + *flash = 0xd0; + eieio(); + while (!(*flash & 0x80)) ; + clr_ci(); +} + + +void +write_flash(unsigned long offset, unsigned char *data) +{ + int cnt = 32; + volatile unsigned char *flash = (volatile unsigned char *)FLASH; + + flash += (offset + flashOffset); + set_ci(); + while (cnt) { + if (!((uint64_t)flash & 0x1F)) { + while (cnt) { + uint64_t tmpcnt = cnt; + if (tmpcnt > 0x20) + tmpcnt = 0x20; + do { + *flash = 0xE8; + eieio(); + } while (!(*flash & 0x80)); + cnt -= tmpcnt; + *flash = tmpcnt - 1; + while (tmpcnt--) { + *flash++ = *data++; + } + *flash = 0xD0; + eieio(); + while (!(*flash & 0x80)) ; + } + break; + } + *flash = 0x40; + eieio(); + *flash++ = *data++; + eieio(); + while (!(*flash & 0x80)) ; + cnt--; + } + clr_ci(); +} + +static void +write_flash_page(unsigned long offset, unsigned short *data) +{ + int i = 0; + + for (i = 0; i < BUFSIZE; i += 32, offset += 32) { + write_flash(offset, ((unsigned char *)data + i)); + } +} + +/* + * 0 reject temporary image + * 1 commit temporary image + * */ +static int +copy_flash(short mode) +{ + volatile unsigned char *flash = (volatile unsigned char *)FLASH; + uint64_t blockCnt; + uint64_t hash = 0; + short notmode = mode ^ 0x1; + + if (bmc_set_flashside(notmode) != notmode) { + return -1; + } + printf("\r\nErasing Flash: 0x "); + + for (blockCnt = 0; blockCnt <= FLASHSIZE; blockCnt += FLASH_BLOCK_SIZE) { + print_block(blockCnt); + erase_flash_block(blockCnt); + } + enter_data_mode(); + progress = FLASHSIZE / 38; + print_writing(); + + for (blockCnt = 0; blockCnt <= FLASHSIZE; blockCnt += BUFSIZE) { + uint64_t *srcPtr = (uint64_t *)(flash + blockCnt); + uint64_t *destPtr = (uint64_t *)manage_flash_buffer; + uint64_t cnt = BUFSIZE / 8; + if (bmc_set_flashside(mode) != mode) { + return -1; + } + enter_data_mode(); + set_ci(); + while (cnt--) { + *destPtr++ = *srcPtr++; + } + clr_ci(); + + if (bmc_set_flashside(notmode) != notmode) { + return -1; + } + write_flash_page(blockCnt, + (unsigned short *)manage_flash_buffer); + + /* progress output... */ + print_progress(); + if (blockCnt > hash * progress) { + print_hash(); + hash++; + } + } + enter_data_mode(); + if (bmc_set_flashside(mode) != mode) { + return -1; + } + printf("\b#\n"); + return 0; +} + +/* + * Function: ibm_manage_flash_image + * Input: + * r3: rtas parm structure + * token: 46 + * in: 1 + * out: 1 + * parm0: 0 reject temporary image + * 1 commit temporary image + * Output: + * parm1: Status (hw -1, busy -2, parameter error -3 + * -9001 cannot overwrite the active firmware image) + * + */ + +void +rtas_ibm_manage_flash_image(rtas_args_t *rtas_args) +{ + int side; + int result = 0; + short mode = rtas_args->args[0]; + + if (mode < 0 || mode > 1) { + rtas_args->args[rtas_args->nargs] = -3; + return; + } + side = bmc_get_flashside(); + if (side == 0) { + /* we are on the permanent side */ + if (mode != 0) { + rtas_args->args[rtas_args->nargs] = -9001; + return; + } + } else if (side == 1) { + /* we are on the temporary side */ + if (mode != 1) { + rtas_args->args[rtas_args->nargs] = -9001; + return; + } + } else { + rtas_args->args[rtas_args->nargs] = -1; + return; + } + + result = copy_flash(mode); + bmc_set_flashside(mode); + enter_data_mode(); + rtas_args->args[rtas_args->nargs] = result; +} + +/** + * check, if we find the FLASHFS_MAGIC token in bl + **/ +static uint8_t +check_magic(uint64_t *bl, int version) +{ + struct stH *pHeader; + + if (version == 1) { + /* version 1 blocklist */ + /* if block list size <= 0x10, it is only block list header */ + /* and address of block list extension, so look at the extension... */ + while ((*bl & 0x00FFFFFFFFFFFFFFUL) <= 0x10) + bl = (uint64_t *)bl[1]; + + /* block list item 2 _should_ be the address of our flashfs image */ + pHeader = (struct stH *)(bl[2] + 0x28); + /* printf("FlashFS Magic: \"%#s\"\r\n", pHeader->magic); */ + return strncmp(pHeader->magic, FLASHFS_MAGIC, 8); + } else { + /* block list item 1 _should_ be the address of our flashfs image */ + pHeader = (struct stH *)(bl[1] + 0x28); + /* printf("FlashFS Magic: \"%#s\"\r\n", pHeader->magic); */ + return strncmp(pHeader->magic, FLASHFS_MAGIC, 8); + } +} + +static void +get_image_name(char *buffer, int maxsize) +{ + volatile struct stH *flash_header = (volatile struct stH *)(SB_FLASH_adr + 0x28); + /* since we cannot read the fh_magic directly from flash as a string, we need to copy it to memory */ + uint64_t magic_val = 0; + uint64_t addr; + + /* copy fh_magic to magic_val since, we cannot use it as a string from flash */ + magic_val = load64_ci((uint64_t)(flash_header->magic)); + if (strncmp((char *)&magic_val, FLASHFS_MAGIC, 8)) { + /* magic does not match */ + sprintf(buffer, "Unknown"); + buffer[maxsize - 1] = '\0'; + return; + } + addr = (uint64_t)flash_header->version; + while (--maxsize) { + *buffer = load8_ci(addr++); + if (!*buffer++) + return; + } + *buffer = '\0'; +} + +/** + * validate_flash_image + * this function checks if the flash will be updated with the given image + * @param args[0] - buffer with minimum 4K of the image to flash + * @param args[1] - size of the buffer + * @param args[2] - status: + * 0 success + * -1 hw + * -2 busy + * -3 parameter error + * @param args[3] - update result token + */ +void +rtas_ibm_validate_flash_image(rtas_args_t *rtas_args) +{ + dprintf("\nrtas_ibm_validate_flash_image\n"); + unsigned long new_image = rtas_args->args[0]; + char *ret_str = (char *)new_image; + struct stH *flash_header = (struct stH *)(new_image + 0x28); + char current_temp_version[16]; + char current_perm_version[16]; + char new_version[16]; + int side = bmc_get_flashside(); + + /* fill args[0] with the current values which is needed + * in an error case */ + + bmc_set_flashside(0); + get_image_name(current_perm_version, sizeof(current_perm_version)); + bmc_set_flashside(1); + get_image_name(current_temp_version, sizeof(current_temp_version)); + bmc_set_flashside(side); + + /* check if the candidate image if valid for this platform */ + if (strncmp(flash_header->magic, FLASHFS_MAGIC, 8)) { + /* magic does not match */ + rtas_args->args[rtas_args->nargs] = 0; + /* No update done, the candidate image is + * not valid for this platform */ + rtas_args->args[rtas_args->nargs + 1] = 2; + sprintf(ret_str, "MI %s %s\xaMI %s %s", + current_temp_version, current_perm_version, + current_temp_version, current_perm_version); + return; + } + + if (strncmp(flash_header->platform_name, (char *)sig_org, 32)) { + /* this image if for a different board */ + rtas_args->args[rtas_args->nargs] = 0; + /* No update done, the candidate image is + * not valid for this platform */ + rtas_args->args[rtas_args->nargs + 1] = 2; + sprintf(ret_str, "MI %s %s\xaMI %s %s", + current_temp_version, current_perm_version, + current_temp_version, current_perm_version); + return; + } + + /* check header crc */ + if (check_flash_image(rtas_args->args[0], 0x88, 0)) { + /* header crc failed */ + rtas_args->args[rtas_args->nargs] = 0; + /* No update done, the candidate image is + * not valid for this platform */ + rtas_args->args[rtas_args->nargs + 1] = 2; + sprintf(ret_str, "MI %s %s\xaMI %s %s", + current_temp_version, current_perm_version, + current_temp_version, current_perm_version); + return; + } + memcpy(new_version, flash_header->version, 16); + sprintf(ret_str, "MI %s %s\xaMI %s %s", current_temp_version, + current_perm_version, new_version, current_perm_version); + rtas_args->args[rtas_args->nargs] = 0; + + if (strncmp(new_version, current_temp_version, 16) >= 0) + rtas_args->args[rtas_args->nargs + 1] = 0; + else + rtas_args->args[rtas_args->nargs + 1] = 6; +} + +/* + * Function: ibm_update_flash_64 + * Input: + * r3: rtas parm structure + * token: 7 + * in: 1 + * out: 1 + * parm0: A real pointer to a block list + * Output: + * parm1: Status (hw -1, bad image -3, programming failed -4) + * + * Description: flash if addresses above 4GB have to be addressed + */ +void +rtas_update_flash(rtas_args_t *rtas_args) +{ + void *bl = (void *)(uint64_t)rtas_args->args[0]; + int version = get_block_list_version((unsigned char *)bl); + uint64_t erase_size; + unsigned int i; + int perm_check = 1; + +#ifdef DEBUG + dump_blocklist(bl, version); +#endif + + /* from SLOF we pass a second (unofficial) parameter, if this parameter is 1, we do not + * check wether we are on permanent side. Needed for update-flash -c to work! */ + if ((rtas_args->nargs > 1) && (rtas_args->args[1] == 1)) + perm_check = 0; + + /* check magic string */ + printf("\r\nChecking magic string : "); + if (check_magic(bl, version) != 0) { + printf("failed!\n"); + rtas_args->args[rtas_args->nargs] = -3; /* bad image */ + return; + } + printf("succeeded!\n"); + + /* check platform */ + printf("Checking platform : "); + if (check_platform(bl, 0x48, version) == -1) { + printf("failed!\n"); + rtas_args->args[rtas_args->nargs] = -3; /* bad image */ + return; + } + printf("succeeded!\n"); + + /* checkcrc */ + printf("Checking CRC : "); + /* the actual CRC is included at the end of the flash image, thus the resulting CRC must be 0! */ + if (image_check_crc(bl, version) != 0) { + printf("failed!\n"); + rtas_args->args[1] = -3; /* bad image */ + return; + } + printf("succeeded!\n"); + + /* check if we are running on P + * if so, let's switch to temp and flash temp */ + if (bmc_get_flashside() == 0 && perm_check) { + printf("Set flashside: "); + bmc_set_flashside(1); + printf("Temp!\n"); + } + +#ifdef DEBUG + rtas_args_t ra; + ra.args[0] = 0x100; /* size; */ + ra.args[1] = flashOffset; + ra.nargs = 2; + + rtas_dump_flash(&ra); + printf("\n"); +#endif + + size = get_size(bl, version); + erase_size = (size + (FLASH_BLOCK_SIZE - 1)) & ~(FLASH_BLOCK_SIZE - 1); + dprintf("Erasing: size: %#x, erase_size: %#x, FLASH_BLOCK_SIZE: %#x\n", + size, erase_size, FLASH_BLOCK_SIZE); + + progress = size / 39; + printf("Erasing : 0x%08x", 0); + for (i = 0; i < erase_size; i += FLASH_BLOCK_SIZE) { + print_block(i); + erase_flash_block(i); + } + + enter_data_mode(); +#ifdef DEBUG + rtas_dump_flash(&ra); + printf("\n"); +#endif + print_writing(); + write_block_list(bl, version); + printf("\b#\n"); + enter_data_mode(); + +#ifdef DEBUG + rtas_dump_flash(&ra); + printf("\n"); +#endif + + /* checkcrc */ + printf("Recheck CRC : "); + if (check_flash_image(FLASH + flashOffset, size, 0) != 0) { + /* failed */ + printf("failed!\n\r"); + dprintf("flash_addr: %#x, flashOffset: %#x, size: %#x\n", FLASH, + flashOffset, size); + dprintf("crc: %#x\n", + check_flash_image(FLASH + flashOffset, size, 0)); + rtas_args->args[rtas_args->nargs] = -4; /* programming failed */ + return; + } + printf("succeeded!\n"); + rtas_args->args[rtas_args->nargs] = 0; +} + +/* + * Function: ibm_update_flash_64_and_reboot + * Input: + * r3: rtas parm structure + * token: 27 + * in: 1 + * out: 1 + * parm0: A real pointer to a block list + * Output: + * parm1: Status (hw -1, bad image -3, programming failed -4) + * Currently -4 and -1 are not returned + * + * Description: flash and reboot if addresses above 4GB have to be addressed + */ +void +rtas_ibm_update_flash_64_and_reboot(rtas_args_t *rtas_args) +{ + rtas_update_flash(rtas_args); + dprintf("rc: %#d\n", rtas_args->args[rtas_args->nargs]); + if (rtas_args->args[rtas_args->nargs] == 0) { + rtas_system_reboot(rtas_args); + } +} diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.h b/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.h new file mode 100644 index 000000000..3eec45d27 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_flash.h @@ -0,0 +1,20 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include + +#define FLASHSIZE FLASH_LENGTH +#define FLASH SB_FLASH_adr +#define BUFSIZE 4096 +#define FLASH_BLOCK_SIZE 0x20000 + +void write_flash(unsigned long offset, unsigned char *data); diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_i2c_bmc.h b/qemu/roms/SLOF/board-js2x/rtas/rtas_i2c_bmc.h new file mode 100644 index 000000000..e46de880e --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_i2c_bmc.h @@ -0,0 +1,27 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef __RTAS_I2C_BMC_H +#define __RTAS_I2C_BMC_H + +#include + +void i2c_system_reboot (void); +void i2c_power_off (void); +short i2c_set_flashside (short mode); +short i2c_get_flashside (void); +int i2c_stop_bootwatchdog (void); +uint32_t i2c_read_vpd (uint8_t *dst, uint32_t len, uint32_t offset); +uint32_t i2c_write_vpd (uint8_t *src, uint32_t len, uint32_t offset); +int i2c_set_bootwatchdog(unsigned short seconds); + +#endif /* __RTAS_I2C_BMC_H */ diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_ipmi_bmc.h b/qemu/roms/SLOF/board-js2x/rtas/rtas_ipmi_bmc.h new file mode 100644 index 000000000..00532d4c9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_ipmi_bmc.h @@ -0,0 +1,21 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#ifndef __RTAS_IPMI_BMC_H +#define __RTAS_IPMI_BMC_H + +#include + +short ipmi_set_flashside (short mode); +short ipmi_get_flashside (void); + +#endif /* __RTAS_IPMI_BMC_H */ diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_out.c b/qemu/roms/SLOF/board-js2x/rtas/rtas_out.c new file mode 100644 index 000000000..ce4c00bd2 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_out.c @@ -0,0 +1,120 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtas_board.h" + +volatile unsigned char *uart; +volatile unsigned char u4Flag; + +void io_init(void); +unsigned long check_flash_image(unsigned long rombase, unsigned long length, + unsigned long start_crc); + +void +io_init(void) +{ + // read ID register: only if it is a PC87427, enable serial2 + store8_ci(0xf400002e, 0x20); + if (load8_ci(0xf400002f) != 0xf2) { + uart = (volatile unsigned char *) 0xf40003f8; + u4Flag = 0; + } else { + uart = (volatile unsigned char *) 0xf40002f8; + u4Flag = 1; + } +} + +static void +display_char(char ch) +{ + volatile int i = 0; + volatile unsigned char *uart = (volatile unsigned char *) 0xf40002f8; + int cnt = 2; + while (cnt--) { + set_ci(); + while (!(uart[5] & 0x20)) { + i++; + } + uart[0] = ch; + clr_ci(); + uart += 0x100; + } +} + +ssize_t +write(int fd __attribute((unused)), const void *buf, size_t cnt) +{ + while (cnt--) { + display_char(*(char *) buf); + if (*(char *) buf++ == '\n') + display_char('\r'); + } + return 0; +} + +void * +sbrk(int incr __attribute((unused))) +{ + return (void *) -1; +} + + + +void +rtas_display_character(rtas_args_t * pArgs) +{ + int retVal = 0; + display_char((char) pArgs->args[0]); + pArgs->args[1] = retVal; +} + +unsigned long +check_flash_image(unsigned long rombase, unsigned long length, + unsigned long start_crc) +{ + const uint32_t CrcTableHigh[16] = { + 0x00000000, 0x4C11DB70, 0x9823B6E0, 0xD4326D90, + 0x34867077, 0x7897AB07, 0xACA5C697, 0xE0B41DE7, + 0x690CE0EE, 0x251D3B9E, 0xF12F560E, 0xBD3E8D7E, + 0x5D8A9099, 0x119B4BE9, 0xC5A92679, 0x89B8FD09 + }; + const uint32_t CrcTableLow[16] = { + 0x00000000, 0x04C11DB7, 0x09823B6E, 0x0D4326D9, + 0x130476DC, 0x17C56B6B, 0x1A864DB2, 0x1E475005, + 0x2608EDB8, 0x22C9F00F, 0x2F8AD6D6, 0x2B4BCB61, + 0x350C9B64, 0x31CD86D3, 0x3C8EA00A, 0x384FBDBD + }; + + char *Buffer = (char *) rombase; + uint32_t AccumCRC = start_crc; + char val; + uint32_t Temp; + while (length-- > 0) { + set_ci(); + val = *Buffer; + clr_ci(); + Temp = ((AccumCRC >> 24) ^ val) & 0x000000ff; + AccumCRC <<= 8; + AccumCRC ^= CrcTableHigh[Temp / 16]; + AccumCRC ^= CrcTableLow[Temp % 16]; + ++Buffer; + } + return AccumCRC; +} diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_pci.c b/qemu/roms/SLOF/board-js2x/rtas/rtas_pci.c new file mode 100644 index 000000000..55dbf5336 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_pci.c @@ -0,0 +1,116 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ +#include +#include +#include +#include "rtas_board.h" + +void +rtas_ibm_read_pci_config (rtas_args_t *rtas_args) +{ + int retVal = 0; + uint64_t addr = ((uint64_t) rtas_args->args[1]) << 32; // high 32 bits of PHB UID + addr |= (rtas_args->args[2] & 0xFFFFFFFF); // low 32 bits of PHB UID + addr |= (rtas_args->args[0] & 0x00FFFFFF); // bus, devfn, offset + unsigned int size = rtas_args->args[3]; + + /* Check for bus != 0 on PCI/PCI-X (PHB UID = 0xf2000000) */ + if (((addr & 0xf2000000) == 0xf2000000) && (addr & 0xff0000)) + addr += 0x1000000; + + if (size == 1) + rtas_args->args[5] = load8_ci(addr); + else if (size == 2) + rtas_args->args[5] = bswap16_load(addr); + else if (size == 4) + rtas_args->args[5] = bswap32_load(addr); + else + retVal = -3; /* Bad arguments */ + + rtas_args->args[4] = retVal; +} + +void +rtas_ibm_write_pci_config (rtas_args_t *rtas_args) +{ + int retVal = 0; + uint64_t addr = ((uint64_t) rtas_args->args[1]) << 32; // high 32 bits of PHB UID + addr |= (rtas_args->args[2] & 0xFFFFFFFF); // low 32 bits of PHB UID + addr |= (rtas_args->args[0] & 0x00FFFFFF); // bus, devfn, offset + unsigned int size = rtas_args->args[3]; + + addr |= 0xf2000000; + + /* Check for bus != 0 on PCI/PCI-X (PHB UID = 0xf2000000) */ + if (((addr & 0xf2000000) == 0xf2000000) && (addr & 0xff0000)) + addr += 0x1000000; + + if (size == 1) + store8_ci(addr, rtas_args->args[4]); + else if (size == 2) + bswap16_store(addr, rtas_args->args[4]); + else if (size == 4) + bswap32_store(addr, rtas_args->args[4]); + else + retVal = -3; /* Bad arguments */ + + rtas_args->args[5] = retVal; +} + +void +rtas_read_pci_config (rtas_args_t *rtas_args) +{ + int retVal = 0; + unsigned long addr = rtas_args->args[0]; + unsigned int size = rtas_args->args[1]; + addr |= 0xf2000000; + + /* Check for bus != 0 */ + if (addr & 0xff0000) + addr += 0x1000000; + + if (size == 1) + rtas_args->args[3] = load8_ci(addr); + else if (size == 2) + rtas_args->args[3] = bswap16_load(addr); + else if (size == 4) + rtas_args->args[3] = bswap32_load(addr); + else + retVal = -3; /* Bad arguments */ + + rtas_args->args[2] = retVal; +} + +void +rtas_write_pci_config (rtas_args_t *rtas_args) +{ + int retVal = 0; + unsigned long addr = rtas_args->args[0]; + unsigned int size = rtas_args->args[1]; + + addr |= 0xf2000000; + + /* Check for bus != 0 */ + if (addr & 0xff0000) + addr += 0x1000000; + + if (size == 1) + store8_ci(addr, rtas_args->args[2]); + else if (size == 2) + bswap16_store(addr, rtas_args->args[2]); + else if (size == 4) + bswap32_store(addr, rtas_args->args[2]); + else + retVal = -3; /* Bad arguments */ + + rtas_args->args[3] = retVal; +} diff --git a/qemu/roms/SLOF/board-js2x/rtas/rtas_table.c b/qemu/roms/SLOF/board-js2x/rtas/rtas_table.c new file mode 100644 index 000000000..fed4032af --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/rtas/rtas_table.c @@ -0,0 +1,45 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * All rights reserved. + * This program and the accompanying materials + * are made available under the terms of the BSD License + * which accompanies this distribution, and is available at + * http://www.opensource.org/licenses/bsd-license.php + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ + +#include +#include +#include "rtas_table.h" +#include "rtas_board.h" + +const rtas_funcdescr_t rtas_func_tab[] = { + {"ibm,read-pci-config", rtas_ibm_read_pci_config, 0}, + {"ibm,write-pci-config", rtas_ibm_write_pci_config, 0}, + {"system-reboot", rtas_system_reboot, 0}, + {"power-off", rtas_power_off, 0}, + {"set-indicator", rtas_set_indicator, 0}, + {"rtas-flash-test", rtas_flash_test, RTAS_TBLFLG_INTERNAL}, + {"ibm,update-flash-64-and-reboot", rtas_ibm_update_flash_64_and_reboot, 0}, + {"display-character", rtas_display_character, 0}, + {"event-scan", rtas_event_scan, 0}, + {"ibm,manage-flash-image", rtas_ibm_manage_flash_image, 0}, + {"ibm,validate-flash-image", rtas_ibm_validate_flash_image, 0}, + {"ibm,update-flash-64", rtas_update_flash, 0}, + {"rtas-set-flashside", rtas_set_flashside, 0}, + {"rtas-get-flashside", rtas_get_flashside, 0}, + {"rtas-dump-flash", rtas_dump_flash, RTAS_TBLFLG_INTERNAL}, + {"start-cpu", rtas_start_cpu, 0}, + {"msg-read-vpd", rtas_read_vpd, RTAS_TBLFLG_INTERNAL}, + {"msg-write-vpd", rtas_write_vpd, RTAS_TBLFLG_INTERNAL}, + {"read-pci-config", rtas_read_pci_config, 0}, + {"write-pci-config", rtas_write_pci_config, 0}, + {"rtas-fetch-slaves", rtas_fetch_slaves, RTAS_TBLFLG_INTERNAL}, + {"rtas-stop-bootwatchdog", rtas_stop_bootwatchdog, RTAS_TBLFLG_INTERNAL}, + {"rtas-set-bootwatchdog", rtas_set_bootwatchdog, RTAS_TBLFLG_INTERNAL}, + {"rtas-get-blade-descr", rtas_get_blade_descr, RTAS_TBLFLG_INTERNAL}, +}; + +const int rtas_func_tab_size = sizeof(rtas_func_tab) / sizeof(rtas_func_tab[0]); diff --git a/qemu/roms/SLOF/board-js2x/slof/Makefile b/qemu/roms/SLOF/board-js2x/slof/Makefile new file mode 100644 index 000000000..ab3e683a4 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/Makefile @@ -0,0 +1,111 @@ +# ***************************************************************************** +# * Copyright (c) 2004, 2008 IBM Corporation +# * All rights reserved. +# * This program and the accompanying materials +# * are made available under the terms of the BSD License +# * which accompanies this distribution, and is available at +# * http://www.opensource.org/licenses/bsd-license.php +# * +# * Contributors: +# * IBM Corporation - initial implementation +# ****************************************************************************/ + + +include ../Makefile.dirs + +include $(TOPBRDDIR)/config +include $(TOPCMNDIR)/make.rules + + +all: Makefile.dep OF.ffs paflof $(SLOFCMNDIR)/xvect.bin + +CPPFLAGS = -I$(LIBCMNDIR)/libbootmsg -I$(LIBCMNDIR)/libnvram \ + -I$(LIBCMNDIR)/libusb -I$(LIBCMNDIR)/libbcm +SLOF_LIBS = \ + $(LIBCMNDIR)/libbootmsg.a \ + $(LIBCMNDIR)/libelf.a \ + $(LIBCMNDIR)/libusb.a \ + $(LIBCMNDIR)/libnvram.a \ + $(LIBCMNDIR)/libbcm.a +BOARD_SLOF_IN = \ + $(LIBCMNDIR)/libbootmsg/bootmsg.in \ + $(LIBCMNDIR)/libelf/libelf.in \ + $(LIBCMNDIR)/libusb/usb.in \ + $(LIBCMNDIR)/libbases/libbases.in \ + $(LIBCMNDIR)/libnvram/libnvram.in \ + $(LIBCMNDIR)/libnativeio/nativeio.in \ + $(LIBCMNDIR)/libbcm/bcm.in +BOARD_SLOF_CODE = $(BOARD_SLOF_IN:%.in=%.code) + +include $(SLOFCMNDIR)/Makefile.inc + +FPPINCLUDES = -I. -I$(SLOFCMNDIR)/fs -I$(SLOFCMNDIR) + +USB_FFS_FILES = \ + $(SLOFCMNDIR)/fs/devices/pci-class_0c.fs \ + $(SLOFCMNDIR)/fs/usb/dev-hci.fs \ + $(SLOFCMNDIR)/fs/usb/slofdev.fs \ + $(SLOFCMNDIR)/fs/usb/dev-parent-calls.fs \ + $(SLOFCMNDIR)/fs/usb/dev-keyb.fs \ + $(SLOFCMNDIR)/fs/usb/dev-mouse.fs \ + $(SLOFCMNDIR)/fs/usb/dev-storage.fs \ + $(SLOFCMNDIR)/fs/usb/dev-hub.fs + +# Files that should go into the ROM fs (and so have to be listed in OF.ffs): +OF_FFS_FILES = \ + $(SLOFBRDDIR)/u4-mem.fs \ + $(SLOFBRDDIR)/attu.fs \ + $(SLOFBRDDIR)/cpu.fs \ + $(SLOFBRDDIR)/ioapic.fs \ + $(SLOFBRDDIR)/pci-bridge_1022_7460.fs \ + $(SLOFBRDDIR)/pci-device_1014_028c.fs \ + $(SLOFBRDDIR)/pci-device_1014_02bd.fs \ + $(SLOFBRDDIR)/pci-device_1022_7468.fs \ + $(SLOFBRDDIR)/pci-device_1022_7469.fs \ + $(SLOFBRDDIR)/pci-device_1022_7451.fs \ + $(SLOFBRDDIR)/pci-device_14e4_16a8.fs \ + $(SLOFBRDDIR)/bcm57xx.fs \ + $(SLOFBRDDIR)/pci-class_03.fs \ + $(SLOFBRDDIR)/vga-display.fs \ + $(SLOFBRDDIR)/freq.fs \ + $(SLOFBRDDIR)/pci-device_1002_515e.fs \ + $(SLOFBRDDIR)/citrine.fs \ + $(SLOFBRDDIR)/citrine-disk.fs \ + $(SLOFBRDDIR)/sio.fs \ + $(SLOFBRDDIR)/tpm.fs \ + $(SLOFBRDDIR)/ipmi-kcs.fs \ + $(SLOFCMNDIR)/fs/ide.fs \ + $(SLOFCMNDIR)/fs/fbuffer.fs \ + $(SLOFCMNDIR)/fs/graphics.fs \ + $(SLOFCMNDIR)/fs/generic-disk.fs \ + $(SLOFCMNDIR)/fs/scsi-disk.fs \ + $(SLOFCMNDIR)/fs/scsi-host-helpers.fs \ + $(SLOFCMNDIR)/fs/scsi-probe-helpers.fs \ + $(SLOFCMNDIR)/fs/scsi-support.fs \ + $(SLOFCMNDIR)/fs/pci-device.fs \ + $(SLOFCMNDIR)/fs/pci-bridge.fs \ + $(SLOFCMNDIR)/fs/pci-properties.fs \ + $(SLOFCMNDIR)/fs/pci-config-bridge.fs \ + $(SLOFCMNDIR)/fs/update_flash.fs \ + $(SLOFCMNDIR)/fs/xmodem.fs \ + $(SLOFCMNDIR)/fs/devices/pci-device_10de_0141.fs \ + $(SLOFCMNDIR)/fs/devices/pci-class_02.fs \ + $(SLOFBRDDIR)/default-font.bin + +# Uncomment the following line to enable the USB code: +OF_FFS_FILES += $(USB_FFS_FILES) + +OF_FFS_FILES := $(OF_FFS_FILES:%.fs=%.fsi) + +OF.ffs: Makefile $(SLOFCMNDIR)/Makefile.inc $(OF_FFS_FILES) + $(MAKE) create_OF_ffs + +# Rules for cleaning up: +.PHONY: clean_here clean distclean + +clean_here: + rm -f *.o OF.fsi OF.ffs + +clean: clean_here clean_slof + +distclean: clean_here distclean_slof diff --git a/qemu/roms/SLOF/board-js2x/slof/OF.fs b/qemu/roms/SLOF/board-js2x/slof/OF.fs new file mode 100644 index 000000000..3e3773580 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/OF.fs @@ -0,0 +1,557 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ The master file. Everything else is included into here. + +hex + +' ll-cr to cr + +\ as early as possible we want to know if it is js20, js21 or bimini +\ u3 = js20; u4 = js21/bimini +\ the difference if bimini or js21 will be done later depending if +\ obsidian or citrine is found +\ f8000000 is probably the place of the u3/u4 version +f8000000 rl@ CONSTANT uni-n-version +uni-n-version 4 rshift dup 3 = CONSTANT u3? 4 = CONSTANT u4? +\ if (f4000682 >> 4) == 1... it is a bimini... +f4000682 rb@ 4 rshift 1 = CONSTANT bimini? + +\ to decide wether vga initialisation using bios emulation should be attempted, +\ we need to know wether a vga-device was found during pci-scan. +\ If it is found, this value will be set to the device's phandle +0 value vga-device-node? + +\ planar-id reads back GPIO 29 30 31 and returns it as one value +\ if planar-id >= 5 it should be GA2 else it is GA1 (JS20 only) +defer planar-id ( -- planar-id ) + +: (planar-id) ( -- planar-id) + \ default implementation of planar-id just returns 8 + \ the highest possible planar id for JS20 is 7 + 8 +; + +' (planar-id) to planar-id + +#include "header.fs" + +\ I/O accesses. +#include "io.fs" + +\ XXX: Enable first UART on JS20, scripts forget to do this. Sigh. +3 7 siocfg! 1 30 siocfg! + +#include "serial.fs" + +cr + +#include "base.fs" + +\ Little-endian accesses. Also known as `wrong-endian'. +#include + +\ do not free-mem if address is not within the heap +\ workaround for NVIDIA card +: free-mem ( addr len -- ) + over heap-start heap-end within IF + free-mem + ELSE + 2drop + THEN +; + +: #join ( lo hi #bits -- x ) lshift or ; +: #split ( x #bits -- lo hi ) 2dup rshift dup >r swap lshift xor r> ; + +: blink ; + +: reset-dual-emit ; + +: console-clean-fifo ; + +: bootmsg-nvupdate ; + +: asm-cout 2drop drop ; + +#include "logging.fs" + +: log-string 2drop ; + +#include "bootmsg.fs" + +000 cp + +\ disable the nvram logging until we know if we are +\ running from ram/takeover/js20 or in normal mode on js21 +: (nvramlog-write-byte) drop ; +' (nvramlog-write-byte) to nvramlog-write-byte + +#include "exception.fs" + +: mm-log-warning 2drop ; + +: write-mm-log ( data length type -- status ) + 3drop 0 +; + +080 cp + +#include "rtc.fs" + +100 cp + +\ Input line editing. +#include "accept.fs" + +120 cp + +#include "dump.fs" + +cistack ciregs >r1 ! \ kernel wants a stack :-) + +#include "romfs.fs" + +140 cp +#include "flash.fs" + +\ 1 temp; 0 perm; let's default to temp +1 VALUE flashside? + +\ claim the memory used by copy of the flash +flash-header IF + romfs-base dup flash-image-size 0 claim drop +THEN + +s" bootinfo" romfs-lookup drop c + l@ CONSTANT start-addr +start-addr flash-addr <> CONSTANT takeover? + +takeover? u3? or 0= IF + \ we want nvram logging to work + ['] .nvramlog-write-byte to nvramlog-write-byte +THEN + +160 cp + +u4? IF f8002100 rl@ 0= ELSE false THEN ?INCLUDE u4-mem.fs +u3? IF + planar-id 5 >= IF + 40000 to nvram-size + ELSE + \ change nvram-size to 8000 for GA1 blades + 8000 to nvram-size + THEN +THEN + + +takeover? IF + \ potentially coming from phype + u4? IF + \ takeover on JS21 is using some nvram area + \ which might be available + \ on JS20 the nvram is too small and + \ we just overwrite the nvram + sec-nvram-base to nvram-base + THEN + sec-nvram-size to nvram-size + \ in takeover mode the nvram is probably not mapped + \ to the exact location where the nvram starts + \ doing a small check to see if we have a partition + \ starting with 70; this test is far from perfect but + \ takeover is not the most common mode of running slof + nvram-base rb@ 70 <> IF 0 nvram-base rb! THEN +THEN + +200 cp + +#include +#include + +: .banner .slof-logo .banner ; + +\ Get the secondary CPUs into our own spinloop. +f8000050 rl@ CONSTANT master-cpu +\ cr .( The master cpu is #) master-cpu . + +VARIABLE cpu-mask +: get-slave ( n -- online? ) + 0 3ff8 ! 18 lshift 30000000 or 48003f02 over l! icbi 10000 0 DO LOOP 3ff8 @ ; +: mark-online ( n -- ) 1 swap lshift cpu-mask @ or cpu-mask ! ; +: get-slaves 40 0 DO i get-slave IF i mark-online THEN LOOP ; +: cpu-report ( -- ) + cpu-mask @ 40 0 DO dup 1 and IF ." #" i . THEN 1 rshift LOOP drop +; + +220 cp +master-cpu mark-online get-slaves + +DEFER disable-watchdog ( -- ) +DEFER find-boot-sector ( -- ) + + +240 cp +\ Timebase frequency, in Hz. +\ -1 VALUE tb-frequency +d# 14318378 VALUE tb-frequency \ default value - needed for "ms" to work +-1 VALUE cpu-frequency + +#include "helper.fs" +260 cp + +#include + +270 cp + +#include + +280 cp + +\ rtas-config is not used +0 CONSTANT rtas-config + +#include "rtas.fs" +290 cp +s" update_flash.fs" included +2a0 cp +cpu-mask @ rtas-fetch-cpus drop + +: of-start-cpu rtas-start-cpu ; + +' power-off to halt +' rtas-system-reboot to reboot + +: other-firmware rtas-get-flashside 0= IF 1 ELSE 0 THEN rtas-set-flashside reboot ; +: disable-boot-watchdog rtas-stop-bootwatchdog drop ; +' disable-boot-watchdog to disable-watchdog + +true value bmc? +false value debug-boot? + +\ for JS21/Bimini try to detect BMC... if kcs (io @ca8) status is not ff... +u4? IF ca8 4 + io-c@ ff = IF false to bmc? true to debug-boot? THEN THEN + +VARIABLE memnode + +\ Hook to help loading our secondary boot loader. +DEFER disk-read ( lba cnt addr -- ) +0 VALUE disk-off + +create vpd-cb 24 allot +create vpd-bootlist 4 allot +2c0 cp +#include "ipmi-vpd.fs" +2e0 cp +#include +300 cp +#include +320 cp +#include +#include +360 cp +#include "tree.fs" + +: .system-information ( -- ) + s" " type cr + s" SYSTEM INFORMATION" type cr + s" Processor = " type s" cpu" get-chosen IF + drop l@ >r pvr@ s" pvr>name" r> $call-method type + s" @ " type cpu-frequency d# 1000000 / + decimal . hex s" MHz" type + THEN cr s" I/O Bridge = " type u3? IF + s" U3" ELSE s" U4" THEN type + f8000000 rl@ 4 rshift s" (" type 1 0.r s" ." type + f8000000 rl@ f and 1 0.r s" )" type cr + s" SMP Size = " type cpu-mask @ cnt-bits 1 0.r + s" (" type cpu-report 8 emit s" )" type + cr s" Boot-Date = " type .date cr + s" Memory = " type s" memory" get-chosen IF + drop l@ s" mem-report" rot $call-method THEN + cr s" Board Type = " type u3? IF + s" JS20(GA" type planar-id 5 >= IF + s" 2)" ELSE s" 1)" THEN type + ELSE bimini? IF s" Bimini" ELSE s" JS21" THEN type THEN + s" (" type .vpd-machine-type [char] / emit + .vpd-machine-serial [char] / emit + .vpd-hw-revision 8 emit s" )" type cr + s" MFG Date = " type .vpd-manufacturer-date cr + s" Part No. = " type .vpd-part-number cr + s" FRU No. = " type .vpd-fru-number cr + s" FRU Serial = " type .vpd-cardprefix-serial .vpd-card-serial cr + s" UUID = " type .vpd-uuid cr + s" Flashside = " type rtas-get-flashside 0= IF + ." 0 (permanent)" + ELSE + ." 1 (temporary)" THEN cr + s" Version = " type + takeover? IF + romfs-base 38 + a type + ELSE + slof-build-id here swap rmove + here slof-build-id nip type cr + s" Build Date = " type bdate2human type + THEN + cr cr +; + +800 cp + +#include "nvram.fs" +takeover? not u4? and IF + \ if were are not in takeover mode the nvram should look + \ something like this: + \ type size name + \ ======================== + \ 51 20000 ibm,CPU0log + \ 51 5000 ibm,CPU1log + \ 70 1000 common + \ 7f da000 + \ the partition with the type 51 should have been added + \ by LLFW... if it does not exist then something went + \ wrong and we just destroy the whole thing + 51 get-nvram-partition IF 0 0 nvram-c! ELSE 2drop THEN +THEN + +880 cp + +\ dmesg/dmesg2 not available if running in takeover/ram mode or on js20 +: dmesg ( -- ) u3? takeover? or 0= IF dmesg THEN ; +: dmesg2 ( -- ) u3? takeover? or 0= IF dmesg2 THEN ; + +#include "envvar.fs" +check-for-nvramrc + +8a0 cp +\ The client interface. +#include "client.fs" +\ ELF binary file format. +#include "elf.fs" +#include + +8a8 cp + +\ check wether a VGA device was found during pci scan, if it was +\ try to initialize it and create the needed device-nodes +0 value biosemu-vmem +100000 value biosemu-vmem-size +0 value screen-info + +: init-vga-devices ( -- ) + vga-device-node? 0= use-biosemu? 0= OR IF + EXIT + THEN + s" VGA Device found: " type vga-device-node? node>path type s" initializing..." type cr + \ claim virtual memory for biosemu of 1MB + biosemu-vmem-size 4 claim to biosemu-vmem + \ claim memory for screen-info struct (140 bytes) + d# 140 4 claim to screen-info + \ remember current-node (it might be node 0 so we cannot use get-node) + current-node @ + \ change into vga device node + vga-device-node? set-node + \ run biosemu to initialize the vga card + \ s" Time before biosemu:" type .date cr + vga-device-node? node>path ( pathstr len ) + s" biosemu " biosemu-vmem $cathex ( pathstr len paramstr len ) + 20 char-cat \ add a space ( pathstr len paramstr len ) + biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len ) + 20 char-cat \ add a space ( pathstr len paramstr len ) + 2swap $cat ( paramstr+path len ) + biosemu-debug 0<> IF + 20 char-cat biosemu-debug $cathex \ add biosemu-debug as param + ( paramstr+path+biosemu-debug len ) + THEN + .(client-exec) IF + ." biosemu client exec failed!" cr + set-node \ restore old current-node + EXIT + THEN + \ s" Time after biosemu:" type .date cr + s" VGA initialization: detecting displays..." type cr + \ try to get info for two monitors + 2 0 DO + \ setup screen-info struct as input to get_vbe_info + s" DDC" 0 char-cat screen-info swap move \ null-terminated "DDC" as signature + d# 140 screen-info 4 + w! \ reserved size in bytes (see claim above) + i screen-info 6 + c! \ monitor number + \ 320 screen-info 7 + w! \ max. screen width (800) + 500 screen-info 7 + w! \ max. screen width (1280) + \ following line would be the right thing to do, however environment seems not setup yet... + \ screen-#columns char-width * 500 min 280 max screen-info 7 + w! \ max. screen width, calculated from environment variable screen-#columns, but max. 1280, min. 640... + 8 screen-info 9 + c! \ requested color depth (8bpp) + \ d# 16 screen-info 9 + c! \ requested color depth (16bpp) + \ execute get_vbe_info from load-base + \ s" Time before client exec:" type .date cr + \ since node>path overwrites strings created with s" + \ we need to call it before assembling the parameter string + vga-device-node? node>path ( pathstr len ) + s" get_vbe_info " biosemu-vmem $cathex ( pathstr len paramstr len ) + 20 char-cat \ add a space ( pathstr len paramstr len ) + biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len ) + 20 char-cat \ add a space ( pathstr len paramstr len ) + 2swap $cat ( paramstr+path len ) + 20 char-cat + screen-info $cathex + .(client-exec) 0= + \ s" Time after client exec:" type .date cr + screen-info c@ 0<> AND IF + s" display " type i . s" found..." type + \ screen found + \ create device entry + get-node node>name \ get current nodes name (e.g. "vga") ( str len ) + i \ put display-num on the stack ( str len displaynum ) + new-device \ create new device + s" vga-display.fs" included + finish-device + s" created." type cr + THEN + LOOP + \ return to where we were before changing to vga device node + set-node + \ release the claimed memory + screen-info d# 140 release + biosemu-vmem biosemu-vmem-size release + + s" VGA initialization done." type cr +; + +init-vga-devices + +: enable-framebuffer-output ( -- ) +\ enable output on framebuffer + s" screen" find-alias ?dup IF + \ we need to open/close the screen device once + \ before "ticking" display-emit to emit + open-dev close-node + s" display-emit" $find IF + to emit + ELSE + 2drop + THEN + THEN +; + +enable-framebuffer-output + +8b0 cp + +\ do not let the usb scan overwrite the atapi cdrom alias +\ pci-cdrom-num TO cdrom-alias-num +usb-scan + +: create-aliases ( -- ) + s" net" s" net1" find-alias ?dup IF set-alias ELSE 2drop THEN + s" disk" s" disk0" find-alias ?dup IF set-alias ELSE 2drop THEN + s" cdrom" s" cdrom0" find-alias ?dup IF set-alias ELSE 2drop THEN +; + +create-aliases + +8ff cp + +.system-information + +: directserial +u3? IF + s" /ht/isa/serial@3f8" io +ELSE + s" direct-serial?" evaluate IF s" /ht/isa/serial@2f8" io ELSE s" /ht/isa/serial@3f8" io THEN +THEN +; + +directserial + +\ on bimini we want to automatically enable screen and keyboard, if they are detected... +bimini? IF + key? IF + cr ." input available on current console input device, not switching input / output." cr + ELSE + \ this enables the framebuffer as primary output device + s" screen" find-alias IF drop + s" screen" output + \ at this point serial output is theoretically disabled + ." screen detected and set as default output device" cr + THEN + \ enable USB keyboard + s" keyboard" find-alias IF drop + s" keyboard" input + \ at this point serial input is disabled + ." keyboard detected and set as default input device" cr cr cr + s" Press 's' to enter Open Firmware." type cr + 500 ms + THEN + THEN +THEN + +: .flashside + cr ." The currently active flashside is: " + rtas-get-flashside 0= IF ." 0 (permanent)" ELSE + ." 1 (temporary)" THEN +; + +bmc? IF disable-watchdog THEN + +: flashsave ( "{filename}" -- rc ) + (parse-line) dup 0> IF + s" netsave " \ command + get-flash-base $cathex \ Flash base addr + s" 400000 " $cat \ Flash size (4MB) + 2swap $cat \ add parameters from (parse-line) + evaluate + ELSE + cr + ." Usage: flashsave [bootp|dhcp,]filename[,siaddr][,ciaddr][,giaddr][,bootp-retries][,tftp-retries][,use_ci]" + cr 2drop + THEN +; + +#include + +\ for the blades we read the bootlist from the VPD +bimini? takeover? or 0= IF ['] vpd-boot-import to read-bootlist THEN + +\ for the bimini, we try to boot from disk, if it exists, +\ only if "boot-device" is not set in the nvram +: bimini-bootlist + \ check nvram + s" boot-device" evaluate swap drop ( boot-device-strlen ) + 0= IF + \ no boot-device set in NVRAM, check if disk is available and set it... + \ clear boot-device list + 0 0 set-boot-device + s" disk" find-alias ?dup IF + \ alias found, use it as default + add-boot-device + THEN + THEN +; + +bimini? IF ['] bimini-bootlist to read-bootlist THEN + +#include + +#include + +cr .( Welcome to Open Firmware) +cr +#include "copyright-oss.fs" +cr + +\ this CATCH is to ensure the code bellow always executes: boot may ABORT! +' start-it CATCH drop + +#include +nvram-history? [IF] +." loading shell history .. " +history-load +." done" cr +[THEN] + diff --git a/qemu/roms/SLOF/board-js2x/slof/attu.fs b/qemu/roms/SLOF/board-js2x/slof/attu.fs new file mode 100644 index 000000000..cc1225296 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/attu.fs @@ -0,0 +1,101 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ U4 "Attu" PCIe root complex. + +\ See the PCI OF binding document. + +new-device + +s" pciex" device-name s" pci" device-type +s" U4-pcie" compatible +s" U4" encode-string s" model" property + +\ spare out 0xc0000000-0xefffffff for pcie +f8070200 rl@ fffffff0 and f8070200 rl! +\ enable io memory for pcie @ c0000000-efffffff +70000003 f80903f0 rl!-le + +3 encode-int s" #address-cells" property +2 encode-int s" #size-cells" property + +s" /mpic" find-node encode-int s" interrupt-parent" property +\ XXX should have interrupt map, etc. this works for now though. + +: decode-unit 2 hex-decode-unit 3 #join 8 lshift 0 0 rot F00000 + ; +: encode-unit nip nip ff00 and 8 rshift 3 #split + over IF 2 ELSE nip 1 THEN hex-encode-unit ; + +f1000000 CONSTANT my-puid +\ Configuration space accesses. +: >config f1000000 + ; +: config-l! >config rl!-le ; +: config-l@ >config rl@-le ; +: config-w! >config rw!-le ; +: config-w@ >config rw@-le ; +: config-b! >config rb! ; +: config-b@ >config rb@ ; + +: config-dump ( addr size -- ) ['] config-l@ 4 (dump) ; + +\ 16MB of configuration space +f1000000 encode-64 1000000 encode-64+ s" reg" property + +\ 4MB of I/O space. +01000000 encode-int 00000000 encode-int+ 00000000 encode-int+ +00000000 encode-int+ f0000000 encode-int+ +00000000 encode-int+ 00400000 encode-int+ + +\ 1.75GB of memory space @ c0000000. +02000000 encode-int+ c0000000 encode-64+ +c0000000 encode-64+ 30000000 encode-64+ s" ranges" property + +\ Host bridge, so full bus range. +f0 encode-int ff encode-int+ s" bus-range" property + +: open true ; +: close ; + +\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- ) +s" /mpic" find-node my-puid pci-irq-init drop + +00fff1f0 18 config-l! + +ff F0 f0000000 e8000000 e8000000 c0000000 100000000 f000 +my-puid probe-pci-host-bridge + +\ \ PCIe debug / fixup +: find-pcie-cap ( devfn -- offset | 0 ) + >r 34 BEGIN r@ + config-b@ dup ff <> over and WHILE + dup r@ + config-b@ 10 = IF + r> drop EXIT + THEN 1+ + REPEAT r> 2drop 0 +; + + : (set-ps) ( ps addr -- ) + 8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ; + : set-ps ( ps -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-ps) THEN drop LOOP drop ; + + : (set-rr) ( rr addr -- ) + 8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ; + : set-rr ( rr -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-rr) THEN drop LOOP drop ; + +80 set-ps 80 set-rr + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs b/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs new file mode 100644 index 000000000..c8e6f5aa9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs @@ -0,0 +1,75 @@ +\ ***************************************************************************** +\ * Copyright (c) 2013 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ Handle bcm57xx device + +s" network" device-type + +my-space pci-alias-net + +VARIABLE obp-tftp-package + +0 VALUE bcm57xx-priv +0 VALUE open-count + +: open ( -- okay? ) + open-count 0= IF + open IF + bcm57xx-open dup not IF ." bcm57xx-open failed" EXIT THEN + drop dup TO bcm57xx-priv + 6 encode-bytes s" local-mac-address" property + true + ELSE + false + THEN + ELSE + true + THEN + my-args s" obp-tftp" $open-package obp-tftp-package ! + open-count 1 + to open-count +; + + +: close ( -- ) + open-count 0> IF + open-count 1 - dup to open-count + 0= IF + bcm57xx-priv bcm57xx-close + close + THEN + THEN + s" close" obp-tftp-package @ $call-method +; + +: read ( buf len -- actual ) + dup IF + bcm57xx-read + ELSE + nip + THEN +; + +: write ( buf len -- actual ) + dup IF + bcm57xx-write + ELSE + nip + THEN +; + +: load ( addr -- len ) + s" load" obp-tftp-package @ $call-method +; + +: ping ( -- ) + s" ping" obp-tftp-package @ $call-method +; diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs b/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs new file mode 100644 index 000000000..146e7ece3 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs @@ -0,0 +1,79 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +( max-#blocks rsrc id -- ) + +new-device + +lwsplit swap wbsplit rot set-unit + +s" disk" device-name s" block" device-type + +CONSTANT resource-id +CONSTANT max-#blocks +get-parent CONSTANT ppack + + +: our-disk-read ( lba count addr -- ) + >r >r >r resource-id r> r> r> s" do-read" ppack $call-static ; + +0 pci-alias-disk + +\ Requiered interface for deblocker + +200 CONSTANT block-size +40000 CONSTANT max-transfer + +: read-blocks ( addr block# #blocks -- #read ) +\ my-unit s" dev-read-blocks" $call-parent + \ check if the read is within max-#blocks + 2dup + max-#blocks 1 + > IF + \ 2drop drop 0 \ return 0 + \ returning 0 would be correct (maybe?) but it confuses the deblocker... + \ so i erase whatever would have been read and return the "expected" #read + dup >r + swap drop \ drop block# (not needed) + block-size * erase \ erase at addr #blocks * block-size + r> \ return #read + ELSE + dup >r rot our-disk-read r> + THEN +; + +INSTANCE VARIABLE deblocker + +: open ( -- okay? ) + 0 0 s" deblocker" $open-package dup deblocker ! dup IF + s" disk-label" find-package IF + my-args rot interpose + THEN + THEN 0<> ; + +: close ( -- ) + deblocker @ close-package ; + +: seek ( pos.lo pos.hi -- status ) + 2dup lxjoin max-#blocks 1 + block-size * > IF + \ illegal seek, return -1 + 2drop -1 + ELSE + s" seek" deblocker @ $call-method + THEN +; + +: read ( addr len -- actual ) + s" read" deblocker @ $call-method ; + + +finish-device + diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs b/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs new file mode 100644 index 000000000..5842b07c9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs @@ -0,0 +1,36 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ we do all flash accesses as 8-bit + +9f000000 CONSTANT citrine-flash-addr + +: >citrine-flash citrine-flash-addr + ; +: citrine-flash@ >citrine-flash rb@ ; +: citrine-flash! >citrine-flash rb! ; +: wait-for-citrine-flash-ready BEGIN 0 citrine-flash@ 80 and UNTIL ; +: erase-citrine-flash-block ( offset -- ) + cr dup 8 .r ." Erasing..." + 20 over citrine-flash! d0 swap citrine-flash! wait-for-citrine-flash-ready ; +: write-citrine-flash ( data offset -- ) + over ff = IF 2drop EXIT THEN + 40 over citrine-flash! citrine-flash! wait-for-citrine-flash-ready ; +: write-citrine-flash-block ( addr offset -- ) \ always writes 128kB! + ." Writing..." + 20000 0 DO over i + c@ over i + write-citrine-flash LOOP 2drop + ." Done." ; +: citrine-flash ( addr offset size -- ) + BEGIN dup 0 > WHILE >r dup erase-citrine-flash-block + 2dup write-citrine-flash-block >r 20000 + r> 20000 + r> 20000 - REPEAT + drop 2drop -1 0 citrine-flash! ; + diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine.fs b/qemu/roms/SLOF/board-js2x/slof/citrine.fs new file mode 100644 index 000000000..ad6777699 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/citrine.fs @@ -0,0 +1,245 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ Citrine storage controller. +2dup type + +device-name s" ide" device-type + + +3 encode-int s" #address-cells" property +0 encode-int s" #size-cells" property + +: decode-unit 3 hex-decode-unit ; +: encode-unit 3 hex-encode-unit ; + + +: >ioa [ 10 config-l@ -10 and ] LITERAL + ; +: ioa@ >ioa rl@-le ; +: ioa! >ioa rl!-le ; + + +\ Clear request completion doorbell. +2 228 ioa! + +\ status +CREATE ioasa 200 allot ioasa 200 erase \ can reduce to 8 later + +\ request/response queue +CREATE rrq 100 allot rrq 100 erase \ can be smaller + +\ data descriptor +CREATE ioadl 8 allot + +\ control block +CREATE ioarcb 80 allot ioarcb 80 erase +ioarcb dup l! +60708090 ioarcb c + l! \ user handle +ioadl ioarcb 2c + l! \ read ioadl +ioasa ioarcb 34 + l! 200 ioarcb 38 + w! + +\ ioa config data (max. 16 devices) +CREATE ioacfg 404 allot ioacfg 404 erase +CREATE setsupbuff 2c allot + setsupbuff 2c erase + 2c setsupbuff w! + 1 setsupbuff 3 + c! + +: wait-ready ( -- ) + 82800000 214 ioa! + 80000000 BEGIN dup 224 ioa@ cr .s dup 8000000 and IF + cr ." Unit check on SAS-Controller detected" + cr 42c ioa@ . + 8 110 ioa! + BEGIN cr 0 config-l@ dup . ffffffff <> UNTIL +\ ABORT" Unit check on SAS-Controller detected" + THEN + and + UNTIL drop +; + +\ wait-ready + +: wait-ioa ( int-mask -- ) BEGIN dup 224 ioa@ and UNTIL drop ; +: init-ioa ( -- ) 82800000 214 ioa! 80000000 wait-ioa ; +: do-request ( -- ) ioasa 20 erase ioarcb 404 ioa! + 2 wait-ioa 2 228 ioa! +; + +: setup-ioarcb ( rsrc type addr len -- ) + tuck 49000000 or ioadl l! ioadl 4 + l! \ setup ioadl + ioarcb 20 + l! ioadl ioarcb 2c + l! 8 ioarcb 30 + l! \ set len, ioadl addr + ioarcb 3e + c! ioarcb 8 + l! \ set type and resource + ioarcb 40 + 40 erase ; + +: setup-wrioarcb ( rsrc type addr len -- ) + tuck 49000000 or ioadl l! ioadl 4 + l! \ setup ioadl + ioarcb 1C + l! ioadl ioarcb 24 + l! 8 ioarcb 28 + l! \ set len, ioadl addr + ioarcb 3e + c! ioarcb 8 + l! \ set type and resource + ioarcb 40 + 40 erase ; + +: setup-idrrq ( rrq len -- ) + c4 ioarcb 42 + c! 8 lshift ioarcb 48 + l! ioarcb 44 + l! ; +: do-idrrq ( -- ) -1 1 0 0 setup-ioarcb rrq 100 setup-idrrq do-request ; + +: setup-query ( len -- ) c5 ioarcb 42 + c! 8 lshift ioarcb 48 + l! ; +: do-query ( -- ) -1 1 ioacfg 404 setup-ioarcb 404 setup-query do-request ; + +: setup-startUnit ( -- ) 1b ioarcb 42 + c! 3 ioarcb 46 + c! ; +: do-startUnit ( hndl -- ) 0 0 0 setup-ioarcb setup-startUnit do-request ; + +: setup-setsupported ( len -- ) 80 ioarcb 40 + c! fb ioarcb 42 + c! 8 lshift ioarcb 48 + l! ; +: do-setsupported ( -- ) -1 1 setsupbuff 2c setup-wrioarcb 2c setup-setsupported do-request ; + +\ ******************************** +\ read capacity +\ ******************************** +CREATE cap 8 allot + +: setup-cap ( -- ) 25 ioarcb 42 + c! cap 8 erase ; +: do-cap ( rsrc addr -- ) + >r 0 r> 8 setup-ioarcb setup-cap do-request ; + +: .id ( id -- ) ." @" lwsplit 2 0.r ." ," wbsplit 2 0.r ." ," 2 0.r ; + +: .cap ( rsrc -- ) + cap do-cap cap l@ cap 4 + l@ * d# 50000000 + d# 100000000 / + base @ >r decimal d# 10 /mod 4 .r ." ." 0 .r ." GB" r> base ! ; + +\ ******************************** +\ Test Unit Ready +\ ******************************** +: setup-test-unit-ready ( -- ) + 00 ioarcb 42 + c! \ SCSI cmd: Test-Unit-Ready +; + +: do-test-unit-ready ( rsrc -- ) + 0 0 0 setup-ioarcb ( rsrc type addr len -- ) + setup-test-unit-ready + do-request +; + +\ ******************************** +\ Check devices +\ ******************************** +: check-device ( ioacfg-entry -- ) + dup 2 + w@ 2001 and 0<> \ generic or raid disk + IF \ is an IOA resource ? + dup 8 + l@ ( ioacfg-entry rsrc ) \ get resource handle + 8 0 + DO ( ioacfg-entry rsrc ) + dup do-test-unit-ready ( ioacfg-entry rsrc ) + ioasa l@ 0= \ read returned status + IF + LEAVE + THEN + LOOP + drop ( ioacfg-entry ) + THEN + drop ( ) +; + +: check-devices ( -- ) + ioacfg 4 + ( ioacfg-entry ) \ config block for 16 devices + ioacfg c@ 0 \ amount of detected devices + ?DO + dup + check-device ( ioacfg-entry ) + 40 + + LOOP + drop +; + +\ ******************************** +\ Show Devices +\ ******************************** +: show-device ( ioacfg-entry -- ) + cr ." " dup 2 + w@ + dup 8000 and IF ." Controller :" THEN + dup 2000 and IF ." Disk (RAID Member):" THEN + dup 0002 and IF ." Disk (Volume Set) :" THEN + 0001 and IF ." Disk (Generic) :" THEN + space dup 4 + l@ ffffff and dup ffffff <> IF + .id + ELSE drop 9 spaces THEN space + dup 1c + 8 type space dup 24 + 10 type + dup 2 + w@ 8000 and 0= IF + space dup 8 + l@ .cap + THEN drop +; + +: show-devices ( -- ) + ioacfg 4 + ioacfg c@ 0 + ?DO dup show-device 40 + LOOP drop +; + +: setup-read ( lba len -- ) \ len is in blocks + 28 ioarcb 42 + c! + swap ioarcb 44 + l! + 8 lshift ioarcb 48 + l! +; + +: do-read ( hndl lba len addr -- ) \ len is in blocks + over >r rot >r swap 0 -rot 200 * ( 0 hndl addr len* ) + setup-ioarcb r> r> ( lba len ) + setup-read do-request +; + +: make-subnode ( rsrc-type rsrc-handle id -- ) + rot 2 and IF \ only device which are part of a RAID should be started + over do-startUnit \ at least on citrine there are problems starting + \ Generic SCSI devices + THEN do-setsupported + dup ffffff <> IF + \ we need max-#blocks for citrine-disk.fs + ( rsrc id ) + over cap do-cap cap l@ ( rsrc id max-#blocks ) + swap rot swap ( max-#block rsrc id ) \ this is what citrine-disk.fs expects... + s" citrine-disk.fs" included + ELSE + 2drop + THEN +; + +: make-subnodes ( -- ) + ioacfg 4 + ioacfg c@ 0 ?DO dup 2 + w@ dup ( ioacfg rsrc-type rsrc-type ) + A000 \ 8000 = Resource Subtype is IOA Focal Point. + \ 2000 = Device is a member of a data redundancy group (eg. RAID). + \ (1000 = Device is designated for use as a hot spare. + \ Unfortunately obsidian reports disk which are not part of + \ of a RAID also as hot space even if they are not.) + \ all these devices should not appeat in DT + \ SIS40 page 60 + and 0= IF + swap dup ( rsrc-type ioacfg ioacfg ) + 8 + l@ over 4 + l@ ( rsrc-type ioacfg rsrc-handle rsrc-addr ) + ffffff and 2swap swap 2swap ( ioacfg rsrc-type rsrc-handle rsrc-addr ) + make-subnode ELSE drop THEN 40 + LOOP drop ; + +: do-it ( -- ) + init-ioa do-idrrq + do-query + check-devices + show-devices +; + +: setup-shutdown ( -- ) + f7 ioarcb 42 + c! 0 ioarcb 48 + l! 0 ioarcb 44 + l! ; +: do-shutdown ( -- ) -1 1 0 0 setup-ioarcb setup-shutdown do-request ; + +: open true ; +: close ; + +: start ['] do-it CATCH IF cr ." Citrine disabled" ELSE make-subnodes THEN ; + +cr start cr cr diff --git a/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs b/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs new file mode 100644 index 000000000..06f9a3ada --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs @@ -0,0 +1,16 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +cr .( Copyright (c) char ) emit .( 2004, 2008 IBM Corporation All rights reserved.) +cr .( This program and the accompanying materials are made available) +cr .( under the terms of the BSD License available at) +cr .( http://www.opensource.org/licenses/bsd-license.php) diff --git a/qemu/roms/SLOF/board-js2x/slof/cpu.fs b/qemu/roms/SLOF/board-js2x/slof/cpu.fs new file mode 100644 index 000000000..bee07d108 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/cpu.fs @@ -0,0 +1,44 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ CPU node. Pretty minimal... + +( cpu# -- ) +new-device set-space + +: pvr>name s" PowerPC," rot 10 rshift CASE + 39 OF s" 970" ENDOF + 3c OF s" 970FX" ENDOF + 44 OF 1 my-space 1 xor lshift cpu-mask @ and IF + s" 970MP" ELSE s" 970GX" THEN ENDOF + \ On GX CPUs, the sibling is missing, numbering is the same. + dup dup OF 0 <# # # # # [char] # hold #> ENDOF ENDCASE $cat ; + +pvr@ pvr>name device-name +s" cpu" device-type + +my-space encode-int s" reg" property + +tb-frequency encode-int s" timebase-frequency" property +cpu-frequency encode-int s" clock-frequency" property + + 8000 encode-int s" d-cache-size" property + 80 encode-int s" d-cache-line-size" property +10000 encode-int s" i-cache-size" property + 80 encode-int s" i-cache-line-size" property + +: open true ; +: close ; + + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/dart.fs b/qemu/roms/SLOF/board-js2x/slof/dart.fs new file mode 100644 index 000000000..8fdac83f9 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/dart.fs @@ -0,0 +1,31 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ CPC9x5 DART. + +new-device + +s" dart" 2dup device-name device-type +u3? IF s" u3-dart" compatible THEN +u4? IF s" u4-dart" compatible THEN + +0 encode-int f8033000 encode-int+ +0 encode-int+ 7000 encode-int+ s" reg" property + +: open true ; +: close ; + +\ Now clear and disable the DART. +20000000 f8033000 rl! + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/flash.fs b/qemu/roms/SLOF/board-js2x/slof/flash.fs new file mode 100644 index 000000000..110f5c86b --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/flash.fs @@ -0,0 +1,43 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ we do all flash accesses as 8-bit + +ff000000 CONSTANT flash-addr + +: >flash flash-addr + ; +: flash@ >flash rb@ ; +: flash! >flash rb! ; +: wait-for-flash-ready BEGIN 0 flash@ 80 and UNTIL ; +: erase-flash-block ( offset -- ) + cr dup 8 .r ." Erasing..." + 20 over flash! d0 swap flash! wait-for-flash-ready ; +: write-flash ( data offset -- ) + 40 over flash! flash! wait-for-flash-ready ; +: write-flash-buffer ( addr offset -- ) + e8 over flash! wait-for-flash-ready 1f over flash! + 20 0 DO over i + c@ over i + flash! LOOP + d0 over flash! wait-for-flash-ready 2drop ; +: write-flash-block ( addr offset -- ) \ always writes 128kB! + ." Writing..." + 20000 0 DO over i + over i + write-flash-buffer 20 +LOOP 2drop + ." Done." ; +: flash ( addr offset size -- ) + BEGIN dup 0 > WHILE >r dup erase-flash-block 2dup write-flash-block + >r 20000 + r> 20000 + r> 20000 - REPEAT drop 2drop -1 0 flash! ; + +: flash-it get-load-base 0 e0000 flash ; +: flash4 get-load-base 0 400000 flash ; + +\ for update-flash +: flash-image-size ( addr -- size ) 30 + rx@ ; diff --git a/qemu/roms/SLOF/board-js2x/slof/freq.fs b/qemu/roms/SLOF/board-js2x/slof/freq.fs new file mode 100644 index 000000000..9f1d36d78 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/freq.fs @@ -0,0 +1,39 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ Use the HPET to calculate various frequencies. + +\ Make HPET run. +1 10 hpet! + +\ Set PMC1 to count CPU cycles. +f00 mmcr0! + +d# 1000000000000000 4 hpet@ / CONSTANT hpet-freq + +: get-times tbl@ pmc1@ f0 hpet@ ; + +\ Calculate the CPU and TB frequencies. +: calibrate get-times dup >r swap >r swap >r hpet-freq d# 100 / + >r + BEGIN get-times dup r@ < WHILE 3drop REPEAT r> drop + rot r> - ffffffff and \ TB + rot r> - ffffffff and \ CPU + rot r> - >r \ HPET + hpet-freq * r@ / swap + hpet-freq * r> / ; + +: round-to tuck 2/ + over / * ; +calibrate TO tb-frequency d# 100000000 round-to TO cpu-frequency + +\ Stop HPET. +0 10 hpet! diff --git a/qemu/roms/SLOF/board-js2x/slof/header.fs b/qemu/roms/SLOF/board-js2x/slof/header.fs new file mode 100644 index 000000000..be2b7221c --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/header.fs @@ -0,0 +1,19 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +get-flash-base VALUE flash-addr + +get-nvram-base CONSTANT nvram-base +get-nvram-size CONSTANT nvram-size +ff8f9000 CONSTANT sec-nvram-base \ save area from phype.... not really known +2000 CONSTANT sec-nvram-size diff --git a/qemu/roms/SLOF/board-js2x/slof/helper.fs b/qemu/roms/SLOF/board-js2x/slof/helper.fs new file mode 100644 index 000000000..34d60da1f --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/helper.fs @@ -0,0 +1,28 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +: slof-build-id ( -- str len ) + flash-header 10 + a +; + +: slof-revision s" 001" ; + +: read-version-and-date + flash-header 0= IF + s" " encode-string + ELSE + flash-header 10 + 10 + here swap rmove + here 10 + s" , " $cat + bdate2human $cat encode-string THEN +; diff --git a/qemu/roms/SLOF/board-js2x/slof/ht.fs b/qemu/roms/SLOF/board-js2x/slof/ht.fs new file mode 100644 index 000000000..8f818a825 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/ht.fs @@ -0,0 +1,189 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ Hypertransport. + +\ See the PCI OF binding document. + +new-device + +s" ht" 2dup device-name device-type +s" u3-ht" compatible +s" U3" encode-string s" model" property + +3 encode-int s" #address-cells" property +2 encode-int s" #size-cells" property + +s" /mpic" find-node encode-int s" interrupt-parent" property + +4000 encode-int 0 encode-int+ 0 encode-int+ +1 encode-int+ s" /mpic" find-node encode-int+ +10 encode-int+ 0 encode-int+ +s" interrupt-map" property + +f800 encode-int 0 encode-int+ 0 encode-int+ +7 encode-int+ s" interrupt-map-mask" property + +: decode-unit 2 hex-decode-unit 3 lshift or + 8 lshift 0 0 rot ; +: encode-unit nip nip ff00 and 8 rshift dup 7 and swap 3 rshift + over IF 2 ELSE nip 1 THEN hex-encode-unit ; + +f2000000 CONSTANT my-puid +\ Configuration space accesses. +: >config dup ffff > IF 1000000 + THEN f2000000 + ; + +\ : config-l! >config cr ." config-l! " 2dup . space . rl!-le ; +\ : config-l@ >config cr ." config-l@ " dup . rl@-le space dup . ; +\ : config-w! >config cr ." config-w! " 2dup . space . rw!-le ; +\ : config-w@ >config cr ." config-w@ " dup . rw@-le space dup . ; +\ : config-b! >config cr ." config-b! " 2dup . space . rb! ; +\ : config-b@ >config cr ." config-b@ " dup . rb@ space dup . ; + +: config-l! >config rl!-le ; +: config-l@ >config rl@-le ; +: config-w! >config rw!-le ; +: config-w@ >config rw@-le ; +: config-b! >config rb! ; +: config-b@ >config rb@ ; + +: config-dump ( addr size -- ) ['] config-l@ 4 (dump) ; + + +\ 16MB of configuration space, separate for type 0 and type 1. +00000000 encode-int f2000000 encode-int+ +00000000 encode-int+ 02000000 encode-int+ s" reg" property + +\ 4MB of I/O space. +01000000 encode-int 00000000 encode-int+ 00000000 encode-int+ +00000000 encode-int+ f4000000 encode-int+ +00000000 encode-int+ 00400000 encode-int+ + +\ 1 GB of memory space @ 80000000 +02000000 encode-int+ 00000000 encode-int+ 80000000 encode-int+ +00000000 encode-int+ 80000000 encode-int+ +00000000 encode-int+ 40000000 encode-int+ s" ranges" property + +\ Host bridge, so full bus range. +0 encode-int ff encode-int+ s" bus-range" property + +: enable-ht-apic-space 3c0300fe f8070200 rl! ; +enable-ht-apic-space + +\ spare out 0xc0000000-0xefffffff for pcie +f8070200 rl@ fffffff0 and f8070200 rl! +\ enable io memory for pcie @ c0000000-efffffff +70000003 f80903f0 rl!-le + + +\ Workaround for "takeover" boot on JS20: the top 8131 is programmed to be +\ device #1f, while it should be #01. +u3? IF f800 config-l@ 74501022 = IF 41 f8c2 config-w! THEN THEN + +\ Assign BUIDs. + +: find-ht-primary + 34 BEGIN config-b@ dup 0= ABORT" No HT capability block found!" + dup config-l@ e00000ff and 8 = IF 2 + EXIT THEN 1 + AGAIN ; + +: assign-buid ( this -- next ) + find-ht-primary dup >r config-w@ 5 rshift 1f and over r> config-b! + ; + +: assign-buids ( -- ) + 1 BEGIN 0 config-l@ ffffffff <> WHILE assign-buid REPEAT drop ; + +assign-buids + +: ldtstop f8000840 rl@ 40000 or f8000840 rl! ; +: delay 100000 0 DO LOOP ; +: wait-for-done BEGIN f8070110 rl@ 30 and UNTIL + BEGIN 8b4 config-l@ 30 and UNTIL ; +: ldtstop1 f8000840 rl@ dup 20000 or f8000840 rl! delay + f8000840 rl! wait-for-done ; +: warm 400000 f8070300 rl! 0 f8070300 rl! ; + +: dumpht cr f8070110 rl@ 8 0.r space 8b4 config-l@ 8 0.r + space f8070122 rb@ 2 0.r space 8bd config-b@ 2 0.r ; + +: clearht f8070110 dup rl@ swap rl! + f8070120 dup rl@ swap rl! + 08b4 dup config-l@ swap config-l! + 08bc dup config-l@ swap config-l! ; + +: setwidth dup f8070110 rb! 8b7 config-b! ; +: set8 00 setwidth ; +: set16 11 setwidth ; + +: setfreq dup f8070122 rb! 8bd config-b! ; +: set200 0 setfreq ; +: set300 1 setfreq ; +: set400 2 setfreq ; +: set500 3 setfreq ; +: set600 4 setfreq ; +: set800 5 setfreq ; +: set1000 6 setfreq ; +: set1200 7 setfreq ; +: set1400 8 setfreq ; +: set1600 9 setfreq ; + +: ht>freq 2 + dup 6 > IF 2* 6 - THEN d# 100 * ; +\ XXX: looks only at the U3/U4 side for max. link speed and width. +clearht f8070111 rb@ setwidth +f8070120 rw@ 2log dup .( Switching top HT bus to ) ht>freq 0 d# .r .( MHz...) cr +setfreq u3? IF ldtstop THEN u4? IF ldtstop1 THEN + +: open true ; +: close ; + +\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- ) +s" /mpic" find-node my-puid pci-irq-init drop +1f 0 c0000000 b8000000 b8000000 80000000 100000000 10000 +my-puid probe-pci-host-bridge + +: msi + f80040f0 010854 config-l! 0 010858 config-l! + ffff 01085c config-w! 81 010852 config-b! +; + +\ This works. Needs cleaning up though; and we need to communicate the +\ MSI address range to the client program. (We keep the default range +\ at fee00000 for now). +: msi-on 7 1 DO 10000 i 800 * a0 + config-l! LOOP ; +msi-on + +\ PCIe debug / fixup +: find-pcie-cap ( devfn -- offset | 0 ) + >r 34 BEGIN r@ + config-b@ dup ff <> over and WHILE + dup r@ + config-b@ 10 = IF + r> drop EXIT + THEN 1+ + REPEAT r> 2drop 0 +; + +: (set-ps) ( ps addr -- ) + 8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ; +: set-ps ( ps -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-ps) THEN drop LOOP drop ; + +: (set-rr) ( rr addr -- ) + 8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ; +: set-rr ( rr -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-rr) THEN drop LOOP drop ; + +100 set-ps 200 set-rr +100 set-ps 200 set-rr + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/i2c.fs b/qemu/roms/SLOF/board-js2x/slof/i2c.fs new file mode 100644 index 000000000..044bde92d --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/i2c.fs @@ -0,0 +1,77 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +new-device + +s" i2c" 2dup device-name device-type +s" u4-i2c" compatible + +0 encode-int f8001000 encode-int+ +0 encode-int+ 1000 encode-int+ s" reg" property + +: >i2c f8001000 + ; +: i2c@ >i2c rl@ ; +: i2c! >i2c rl! ; + +: .i2c 80 0 DO i i2c@ . 10 +LOOP ; + +\ 0 mode 1 ctrl 2 stat 3 isr 4 ier 5 addr 6 suba 7 data +\ 8 rev 9 risetime a bittime + +\ 0 mode: 08 +\ 1 ctrl: 8 = start 4 = stop 2 = xaddr 1 = aak +\ 2 stat: 2 = lastaak 1 = busy +\ 3 isr: 8 = istart 4 = istop 2 = iaddr 1 = idata +\ 4 ier: -- +\ 5 addr: a1..a7 +\ 6 suba: offset +\ 7 data: data + +: i2c-addr ( addr -- ) 50 i2c! 2 10 i2c! BEGIN 30 i2c@ 2 and UNTIL ; +: i2c-subaddr ( suba -- ) 60 i2c! ; +: i2c-stop ( -- ) BEGIN 30 i2c@ dup 30 i2c! 4 and UNTIL ; +: i2c-nak? ( -- failed? ) 20 i2c@ 2 and 0= dup IF i2c-stop THEN ; +: i2c-short? ( -- failed? ) 30 i2c@ 4 and 0<> dup IF 0 10 i2c! i2c-stop THEN ; +: i2c-aak-if-more ( n -- ) 1 <> 1 and 10 i2c! ; + +: (read) ( buf len addr -- error? ) + 1 or i2c-addr i2c-nak? IF 2drop true EXIT THEN + dup i2c-aak-if-more 2 30 i2c! + BEGIN + 30 i2c@ 1 and IF + 1- >r 70 i2c@ over c! char+ r> + dup 0= IF i2c-stop 2drop false EXIT THEN + dup i2c-aak-if-more 1 30 i2c! THEN + i2c-short? IF 2drop true EXIT THEN + AGAIN ; + +: i2c-read ( buf len addr -- error? ) + 4 0 i2c! (read) ; +: i2c-sub-read ( buf len addr suba -- error? ) + c 0 i2c! i2c-subaddr (read) ; + +: i2c-write ( buf len addr -- error? ) + 4 0 i2c! i2c-addr i2c-nak? IF 2drop true EXIT THEN + over c@ 70 i2c! 2 30 i2c! + BEGIN + 30 i2c@ 1 and IF + 1- >r char+ r> i2c-nak? IF 2drop true EXIT THEN + dup 0= IF 4 10 i2c! i2c-stop nip EXIT THEN + over c@ 70 i2c! 1 30 i2c! THEN + i2c-short? IF 2drop true EXIT THEN + AGAIN ; + +: open true ; +: close ; + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/io.fs b/qemu/roms/SLOF/board-js2x/slof/io.fs new file mode 100644 index 000000000..f3889840c --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/io.fs @@ -0,0 +1,26 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ I/O accesses. + +\ Legacy I/O accesses. +: >io f4000000 + ; + +: io-c! >io rb! ; +: io-c@ >io rb@ ; + +: io-w! >io rw! ; +: io-w@ >io rw@ ; + +\ Accessing the SIO config registers. +: siocfg! 2e io-c! 2f io-c! ; +: siocfg@ 2e io-c! 2f io-c@ ; diff --git a/qemu/roms/SLOF/board-js2x/slof/ioapic.fs b/qemu/roms/SLOF/board-js2x/slof/ioapic.fs new file mode 100644 index 000000000..685d6dfed --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/ioapic.fs @@ -0,0 +1,36 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ ( ioapic-addr -- ) +\ IO-APIC setup. + +CONSTANT ioapic + +: ioapic@ ( offset -- x ) ioapic rb! ioapic 10 + rl@-le ; +: ioapic! ( x offset -- ) ioapic rb! ioapic 10 + rl!-le ; + +: init-ioapic ( irq# -- ) + 1a000 or 1 ioapic@ 10 rshift 1+ 0 ?DO + 0 i 2* 11 + ioapic! dup + \ move all ISA IRQs to 40 and higher, + \ as to not conflict with U3/U4 internal + \ IRQs. ISA IRQs are positive edge. + dup ff and 0c < IF a000 - 40 + THEN + i 2* 10 + ioapic! 1+ LOOP drop +; + +: dump-ioapic ( -- ) + 1 ioapic@ 10 rshift 1+ + dup cr . ." irqs" 0 ?DO + cr i 2 0.r space i 2* 11 + ioapic@ 8 0.r + i 2* 10 + ioapic@ 8 0.r LOOP +; diff --git a/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs b/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs new file mode 100644 index 000000000..cf9d5af5a --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs @@ -0,0 +1,57 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ IPMI KCS interface to the BMC. + +new-device + ca8 1 set-unit + + : open true ; + : close ; + + create descr-buf 100 allot + + : rtas-get-bmc-version ( -- adr len ) + descr-buf 100 rtas-get-blade-descr ( len status ) + IF + drop 0 0 + ELSE + descr-buf 9 + swap 11 - ( adr len ) + THEN + ; + + ' rtas-get-bmc-version to bmc-version + + s" system-controller" 2dup device-name device-type + \ s" IBM,BMC." get-build-name $cat encode-string s" model" property + \ s" IBM,BMC.12345" encode-string s" model" property + s" IBM,BMC." bmc-version $cat encode-string s" model" property + 0 0 s" ranges" property + + new-device + + : open true ; + : close ; + + s" ipmi" 2dup device-name device-type + s" ipmi-kcs" compatible + + 1 encode-int ca8 encode-int+ 1 encode-int+ s" reg" property + 4 encode-int s" reg-spacing" property + s" IBM,BMC." bmc-version $cat encode-string s" model" property + + s" ipmi" get-node node>path set-alias + + finish-device + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs b/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs new file mode 100644 index 000000000..bfb3e5014 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs @@ -0,0 +1,98 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +: vpd-read-bootlist ( -- ) + 837 4 vpd-bootlist rtas-read-vpd IF vpd-bootlist 4 erase THEN +; + +: vpd-write-bootlist ( offset len data -- ) + 837 4 vpd-bootlist rtas-write-vpd +; + +: .vpd-machine-type + e 7 vpd-cb rtas-read-vpd drop + 0 vpd-cb 7 + c! + vpd-cb zcount type +; + +: .vpd-machine-serial + 15 7 vpd-cb rtas-read-vpd drop + 0 vpd-cb 7 + c! + vpd-cb zcount type +; + +: .vpd-card-serial + 54 6 vpd-cb rtas-read-vpd drop + 0 vpd-cb 6 + c! + vpd-cb zcount type +; +: .vpd-cardprefix-serial + 5a 6 vpd-cb rtas-read-vpd drop + 0 vpd-cb 6 + c! + vpd-cb zcount type +; + +: .vpd-hw-revision + 65 1 vpd-cb rtas-read-vpd drop + vpd-cb c@ . +; + +: .vpd-part-number + 3c c vpd-cb rtas-read-vpd drop + vpd-cb c type +; + +: .vpd-fru-number + 48 c vpd-cb rtas-read-vpd drop + vpd-cb c type +; + +: .vpd-manufacturer-date + 6b 4 vpd-cb rtas-read-vpd drop + 0 vpd-cb 4 + c! + vpd-cb zcount type +; + +: .vpd-uuid + 9f 10 vpd-cb rtas-read-vpd drop + 10 0 do i vpd-cb + c@ 2 0.r loop +; + +: vpd-read-model ( -- addr len ) + 60 4 vpd-cb rtas-read-vpd drop vpd-cb 4 -leading s" ," $cat + e 7 vpd-cb rtas-read-vpd drop vpd-cb 4 $cat s" -" $cat vpd-cb 4 + 3 $cat +; + +: .vpd + ." ===================== VPD =====================" + cr ." Machine Type : " .vpd-machine-type + cr ." Machine Serial No. : " .vpd-machine-serial + cr ." Hardware Revision : " .vpd-hw-revision + cr ." Manuf. Date : " .vpd-manufacturer-date + cr ." Part Number : " .vpd-part-number + cr ." FRU Number : " .vpd-fru-number + cr ." FRU Serial No. : " .vpd-cardprefix-serial .vpd-card-serial + cr ." UUID : " .vpd-uuid +; + +: vpd-write-revision-and-build-id ( -- ) + 406 24 vpd-cb rtas-read-vpd drop 0 + vpd-cb 1a + zcount bdate2human drop a string=ci 0= + IF bdate2human drop a vpd-cb 1a + zplace drop 1 THEN + vpd-cb zcount slof-revision string=ci 0= + IF slof-revision vpd-cb zplace drop 1 THEN + vpd-cb 4 + zcount slof-build-id string=ci 0= + IF slof-build-id vpd-cb 4 + rzplace drop 1 THEN + 1 = IF 406 24 vpd-cb rtas-write-vpd drop THEN +; + +vpd-write-revision-and-build-id diff --git a/qemu/roms/SLOF/board-js2x/slof/memory.fs b/qemu/roms/SLOF/board-js2x/slof/memory.fs new file mode 100644 index 000000000..b1b7aaa91 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/memory.fs @@ -0,0 +1,52 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ The /memory node. + +\ See 3.7.6. +new-device + +s" memory" 2dup device-name device-type + +: mem-size-u3 20000000 ; +: (mem-size-u4) ( # -- size ) + 4 lshift f8002200 + rl@ dup 1 and 0= IF drop 0 EXIT THEN + dup c000 and e rshift over 3000 and c rshift + 10000000 swap lshift + swap 2 and 0= IF 2* THEN ; +: mem-size-u4 0 4 0 DO i (mem-size-u4) + LOOP ; +: mem-size u3? IF mem-size-u3 THEN u4? IF mem-size-u4 THEN ; +: mem-speed-u4 f8000800 rl@ 12 rshift 7 and 4 + d# 200 * 3 / ; +: mem-speed-u3 f8000f60 rl@ c rshift f and d# 100 * 3 / ; +: mem-speed u3? IF mem-speed-u3 THEN u4? IF mem-speed-u4 THEN ; + + +: encode-our-reg + 0 encode-int 0 encode-int+ + mem-size dup >r 80000000 > IF + 0 encode-int+ 80000000 encode-int+ + 1 encode-int+ 0 encode-int+ r> 80000000 - >r THEN + r@ 20 rshift encode-int+ r> ffffffff and encode-int+ ; +encode-our-reg s" reg" property +0 mem-size release \ Make our memory available + + +: mem-report + base @ decimal mem-size 1e rshift 0 .r + mem-size 3fffffff and IF ." .5" THEN ." GB of RAM @ " + mem-speed . ." MHz" base ! ; + +get-node memnode ! + +: open true ; +: close ; + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/mpic.fs b/qemu/roms/SLOF/board-js2x/slof/mpic.fs new file mode 100644 index 000000000..a9523445d --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/mpic.fs @@ -0,0 +1,31 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +new-device + +s" mpic" device-name s" interrupt-controller" device-type +s" open-pic" compatible +0 0 s" interrupt-controller" property + +2 encode-int s" #interrupt-cells" property + +0 encode-int f8040000 encode-int+ +0 encode-int+ 30000 encode-int+ s" reg" property + +: enable-mpic 6 f80000e0 rl! ; +enable-mpic + +: open true ; +: close ; + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs b/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs new file mode 100644 index 000000000..f017e4a55 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs @@ -0,0 +1,85 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ Starting alias number for net devices after the onboard devices. +2 VALUE pci-net-num +\ Starting alias number for disks after the onboard devices. +0 VALUE pci-disk-num +\ Starting alias number for cdroms after the onboard devices. +0 VALUE pci-cdrom-num + +\ define a new alias for this device +: pci-set-alias ( str-addr str-len num -- ) + $cathex strdup \ create alias name + get-node node>path \ get path string + set-alias \ and set the alias +; + +\ define a new net alias +: unknown-enet ( -- pci-net-num ) + pci-net-num dup 1+ TO pci-net-num +; +: pci-alias-net ( config-addr -- ) + u3? IF + pci-device-vec c@ CASE + 2 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 1 OF dup pci-addr2fn 1 >= IF 1 ELSE 0 THEN ENDOF + dup OF unknown-enet ENDOF + ENDCASE + ELSE + unknown-enet + THEN + ENDOF + dup OF unknown-enet ENDOF + ENDCASE + ELSE + pci-device-vec c@ CASE + 2 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 4 OF dup pci-addr2fn 1 >= IF 1 ELSE 0 THEN ENDOF + dup OF unknown-enet ENDOF + ENDCASE + ELSE + unknown-enet + THEN + ENDOF + dup OF unknown-enet ENDOF + ENDCASE + THEN + swap drop \ forget the config address + + s" net" rot pci-set-alias \ create the alias +; + +\ define a new disk alias +: pci-alias-disk ( config-addr -- ) + drop \ forget the config address + pci-disk-num dup 1+ TO pci-disk-num \ increase the pci-disk-num + s" disk" rot pci-set-alias \ create the alias +; +\ define a new cdrom alias +: pci-alias-cdrom ( config-addr -- ) + drop \ forget the config address + pci-cdrom-num dup 1+ TO pci-cdrom-num \ increase the pci-cdrom-num + s" cdrom" rot pci-set-alias \ create the alias +; + +\ define the alias for the calling device +: pci-alias ( config-addr -- ) + dup pci-class@ + 10 rshift CASE + 01 OF pci-alias-disk ENDOF + 02 OF pci-alias-net ENDOF + dup OF drop ENDOF + ENDCASE +; diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs b/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs new file mode 100644 index 000000000..87b583088 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs @@ -0,0 +1,203 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ AMD 8111 I/O hub. + +\ See the documentation at http://www.amd.com ; the datasheet for this chip is +\ document #24674. + +\ Config space access functions - we're touching multiple device numbers and +\ device functions below, so we've got to add our own my-space base here: +: config-b@ dup 1000 < IF my-space + THEN config-b@ ; +: config-w@ dup 1000 < IF my-space + THEN config-w@ ; +: config-l@ dup 1000 < IF my-space + THEN config-l@ ; +: config-b! dup 1000 < IF my-space + THEN config-b! ; +: config-w! dup 1000 < IF my-space + THEN config-w! ; +: config-l! dup 1000 < IF my-space + THEN config-l! ; + +\ First, some master config. Not all of this logically belongs to just +\ one function, and certainly not to the LPC bridge; also, we'll +\ initialize all functions in "downstream" order, and this code has to be +\ run first. So do it now. + +00 842 config-b! \ Disable 8237 & 8254 & 8259's. We're not a PC. +u3? IF + 80 847 config-b! \ Disable EHCI, as it is terminally broken. +THEN +03 848 config-b! \ Enable LPC, IDE; disable I2C, SMM, AC'97 functions. +01 849 config-b! \ Enable USB, disable 100Mb enet. +01 84b config-b! \ Enable IO-APIC. + +fec00000 s" ioapic.fs" included +00 init-ioapic + +\ Program PNPIRQ[0,1,2] as IRQ #D,E,F; switch those GPIOs to low-active. + 0b 848 config-b! \ enable devB:3 +7000 b58 config-l! \ map PMxx at pci i/o 7000 + d1 b41 config-b! \ enable access to PMxx space + +\ on JS20 the planar id is encoded in GPIO 29, 30 and 31 +\ >=5 is GA2 else it is GA1 +: (planar-id) ( -- planar-id) + [ 70dd io-c@ 5 rshift 1 and ] LITERAL + [ 70de io-c@ 5 rshift 2 and ] LITERAL + [ 70df io-c@ 5 rshift 4 and ] LITERAL + + + 7 xor +; + +u3? IF ['] (planar-id) to planar-id THEN + +8 70d3 io-c! 8 70d4 io-c! 8 70d5 io-c! \ set the pins to low-active + bimini? IF 5 70c4 io-c! THEN \ on bimini set gpio4 as output and high to power up USB + fec b44 config-w! \ set PNPIRQ pnpirq2 -> f , pnpirq1 -> e pnpirq0 -> c + 51 b41 config-b! \ disable access to PMxx space + 03 848 config-b! \ disable devB:3 + +\ The function of the PCI controller BARs change depending on the mode the +\ controller is in. +\ And the default is legacy mode. Gross. +05 909 config-b! \ Enable native PCI mode. +03 940 config-b! \ Enable both ports. + +\ Enable HPET on 8111, at address fe000000. +fe000001 8a0 config-l! + +: >hpet fe000000 + ; +: hpet@ >hpet rl@-le ; +: hpet! >hpet rl!-le ; + +INCLUDE freq.fs + +\ Disable HPET. +0 8a0 config-l! + +\ 8111 has only 16 bits of PCI I/O space. Get the address in range. +8000 next-pci-io ! + +\ before disabling EHCI it needs to be reset + +\ first we are setting up the BAR0, so that we can talk to the +\ memory mapped controller; not using the PCI scan because we just +\ want a temporary setup + +: really-disable-broken-amd8111-ehci ( -- ) + \ this word only works on U4 systems (JS21/Bimini) + \ yeah, hardcoded! + f2000000 to puid + + \ the PCI scan would assign pci-next-mmio to that device + \ let's just take that address + pci-next-mmio @ 100000 #aligned + \ pci-bus-number 10 lshift 210 or could be something like 70210 + \ 7: pci-bus-number + \ 2: device function + \ 10: offset 10 (bar 0) + pci-bus-number 10 lshift 210 or rtas-config-l! + + \ enable memory space + pci-bus-number 10 lshift 204 or dup rtas-config-l@ 2 or swap rtas-config-l! + + pci-next-mmio @ 100000 #aligned ( base ) + + \ Sequence prescribed for resetting the EHCI contoller + + \ If Run/Stop bit (ECAP30 bit 0) is 1 + \ Set Run/Stop bit to 0 + \ wait 2ms + + dup 30 + rl@ 1 and 1 = IF + dup 30 + rl@ 1 or + over 30 + rl! + 2 ms + THEN + + \ While HCHalted bit (ECAP34 bit 12) is 0 (still running, wait forever) + \ wait 2ms + + BEGIN dup 34 + rl@ 1000 and 0= 2 ms UNTIL + + \ Set HCReset bit (ECAP30 bit 1) + + dup 30 + 2 swap rl! + + \ While HCReset bit is 1 (wait forever for reset to complete) + \ wait 2ms + + BEGIN dup 30 + rl@ 2 and 0= 2 ms UNTIL drop + + \ now it is really disabled + + \ disable memory space access again + 2100000 pci-bus-number 10 lshift 204 or rtas-config-l! + + 80 847 config-b! \ Disable EHCI, as it is terminally broken. +; + +my-space pci-class-name type cr + +\ copied from pci-properties.fs and pci-scan.fs +\ changed to disable the EHCI completely just before the scan +\ and after mem/IO transactions have been enabled + +\ Setup the Base and Limits in the Bridge +\ and scan the bus(es) beyond that Bridge +: pci-bridge-probe-amd8111 ( addr -- ) + dup pci-bridge-set-bases \ SetUp all Base Registers + dup pci-bridge-range-props \ Setup temporary "range + pci-bus-number 1+ TO pci-bus-number \ increase number of busses found + pci-device-vec-len 1+ TO pci-device-vec-len \ increase the device-slot vector depth + dup \ stack config-addr for pci-bus! + FF swap \ Subordinate Bus Number ( for now to max to open all subbusses ) + pci-bus-number swap \ Secondary Bus Number ( the new busnumber ) + dup pci-addr2bus swap \ Primary Bus Number ( the current bus ) + pci-bus! \ and set them into the bridge + pci-enable \ enable mem/IO transactions + + \ at this point we can talk to the broken EHCI controller + really-disable-broken-amd8111-ehci + + dup pci-bus-scnd@ func-pci-probe-bus \ and probe the secondary bus + dup pci-bus-number swap pci-bus-subo! \ set SubOrdinate Bus Number to current number of busses + pci-device-vec-len 1- TO pci-device-vec-len \ decrease the device-slot vector depth + dup pci-bridge-set-limits \ SetUp all Limit Registers + drop \ forget the config-addr +; + +\ used to set up all unknown Bridges. +\ If a Bridge has no special handling for setup +\ the device file (pci-bridge_VENDOR_DEVICE.fs) can call +\ this word to setup busses and scan beyond. +: pci-bridge-generic-setup-amd8111 ( addr -- ) + pci-device-slots >r \ save the slot array on return stack + dup pci-common-props \ set the common properties before scanning the bus + s" pci" device-type \ the type is allways "pci" + dup pci-bridge-probe-amd8111 \ find all device connected to it + dup assign-all-bridge-bars \ set up all memory access BARs + dup pci-set-irq-line \ set the interrupt pin + dup pci-set-capabilities \ set up the capabilities + pci-bridge-props \ and generate all properties + r> TO pci-device-slots \ and reset the slot array +; + +: amd8111-bridge-setup + my-space + u3? takeover? or IF + \ if it is js20 or we are coming from takeover + \ we just do the normal setup + pci-bridge-generic-setup + ELSE + pci-bridge-generic-setup-amd8111 + THEN + s" pci" device-name +; + +amd8111-bridge-setup diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs b/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs new file mode 100644 index 000000000..a50714a6b --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs @@ -0,0 +1,23 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ ----------------------------------------------------------------------------- +\ Set the msi address for a device +: pci-set-msi ( cap-addr -- ) + drop +; + +\ Set up all known capabilities for this board to the plugged devices +: pci-set-capabilities ( config-addr -- ) + dup 05 pci-cap-find ?dup IF pci-set-msi THEN + drop +; diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs b/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs new file mode 100644 index 000000000..05c8eb62d --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs @@ -0,0 +1,55 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space pci-class-name type + +my-space pci-device-generic-setup + +my-space pci-class-name device-type + +\ add legacy I/O Ports / Memory regions to assigned-addresses +\ see PCI Bus Binding Revision 2.1 Section 7. +s" reg" get-my-property +IF + \ "reg" does not exist, create new + encode-start +ELSE + \ "reg" does exist, copy it + encode-bytes +THEN +\ I/O Range 0x3B0-0x3BB +my-space a1000000 or encode-int+ \ non-relocatable, aliased I/O space +3b0 encode-64+ \ addr +c encode-64+ \ size +\ I/O Range 0x3C0-0x3DF +my-space a1000000 or encode-int+ \ non-relocatable, aliased I/O space +3c0 encode-64+ \ addr +20 encode-64+ \ size +\ the U4 does not support memory accesses to this region... so we dont put it into "reg" +\ maybe with some clever hacking of the address map registers it will be possible to access +\ these regions?? +\ Memory Range 0xA0000-0xBFFFF +\ my-space a2000000 or encode-int+ \ non-relocatable, <1MB Memory space +\ a0000 encode-64+ \ addr +\ 20000 encode-64+ \ size + +s" reg" property \ store "reg" property + +\ check wether we have already found a vga-device (vga-device-node? != 0) and if +\ this device has Expansion ROM +vga-device-node? 0= 30 config-l@ 0<> AND IF + \ remember this vga device's phandle + get-node to vga-device-node? +THEN + +cr + diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs new file mode 100644 index 000000000..39a02ded0 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs @@ -0,0 +1,501 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space pci-class-name type + +my-space assign-all-device-bars +my-space pci-device-props +my-space pci-set-irq-line + +7 4 config-w! + +\ Special notice from ATI: +\ ATI TECHNOLOGIES INC. ("ATI") HAS NOT ASSISTED IN THE CREATION OF, +\ AND DOES NOT ENDORSE THE USE OF, THIS SOFTWARE. ATI WILL NOT BE +\ RESPONSIBLE OR LIABLE FOR ANY ACTUAL OR ALLEGED DAMAGE OR LOSS +\ CAUSED BY OR IN CONNECTION WITH THE USE OF, OR RELIANCE ON, +\ THIS SOFTWARE. + +\ Description: This FCODE driver initializes the RN50 (ES1000) ATI +\ adaptor. + +-1 value mem-addr +-1 value regs-addr +false value is_installed + +: reg-rl@ regs-addr + rl@-le ; +: reg-rl! regs-addr + rl!-le ; +: map-in " map-in" $call-parent ; +: map-out " map-out" $call-parent ; +: pc@ ( offset -- byte ) regs-addr + rb@ ; +: pc! ( byte offset -- ) regs-addr + rb! ; + +0 value phys_low +0 value phys_mid +0 value phys_high +0 value phys_len + +: MAP-CSR-BASE ( -- ) + " assigned-addresses" get-my-property 0= if + begin dup 0> while ( prop-addr len ) + \ Get the phys-hi mid low and the low order 32 bits of the length + + decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len + + phys_high H# FF and \ See which BAR this refers to + case + h# 10 of phys_low phys_mid phys_high h# 1000000 map-in to mem-addr endof + h# 18 of phys_low phys_mid phys_high phys_len map-in to regs-addr endof + endcase + repeat + ( prop-addr 0 ) 2drop + then + + ; + +: enable-card my-space 4 + dup config-b@ 3 or swap config-b! ; + +: EARLY-MAP ( -- ) + + " reg" get-my-property 0= if + begin dup 0> while ( prop-addr len ) + + \ Get the phys-hi mid low and the low order 32 bits of the length + + decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len + + phys_high H# FF and \ See which BAR this refers to + case + h# 10 of phys_low phys_mid phys_high H# 1000000 map-in to mem-addr endof + h# 18 of phys_low phys_mid phys_high h# 1000 map-in to regs-addr endof + endcase + repeat + ( prop-addr 0 ) 2drop + then + ; + +: EARLY-UNMAP ( -- ) + + mem-addr -1 <> if + mem-addr h# 1000000 map-out + -1 to mem-addr + then + + regs-addr -1 <> if + regs-addr h# 1000 map-out + -1 to regs-addr + then + + ; + +CREATE INIT1_ARRAY +H# 0F8 ( CONFIG_MEMSIZE ) L, H# 00000000 L, H# 01000000 L, +H# 1C0 ( MPP_TB_CONFIG ) L, H# 00FFFFFF L, H# 07000000 L, +H# 030 ( BUS_CNTL ) L, H# 00000000 L, H# 5133A3B0 L, +H# 0EC ( RBBM_CNTL ) L, H# 00000000 L, h# 00004443 L, +H# 1D0 ( DEBUG_CNTL ) L, H# FFFFFFFD L, H# 00000002 L, +H# 050 ( CRTC_GEN_CNTL ) L, H# 00000000 L, H# 04000000 L, +H# 058 ( DAC_CNTL ) L, H# 00000000 L, H# FF604102 L, +H# 168 ( PAD_CTLR_STRENGTH ) L, H# FFFEFFFF L, H# 00001200 L, +H# 178 ( MEM_REFRESH_CNTL ) L, H# 00000000 L, H# 88888888 L, +H# 17C ( MEM_READ_CNTL ) L, H# 00000000 L, H# B7C20000 L, +H# 188 ( MC_DEBUG ) L, H# FFFFFFFF L, H# 00000000 L, +H# D00 ( DISP_MISC_CNTL) L, H# 00FFFFFF L, H# 5B000000 L, +H# 88C ( TV_DAC_CNTL ) L, H# F800FCEF L, H# 00490200 L, +H# D04 ( DAC_MACRO_CNTL) L, H# 00000000 L, H# 00000905 L, +H# 284 ( FP_GEN_CNTL ) L, H# FFFFFFFF L, H# 00000008 L, +H# 030 ( BUS_CNTL ) L, H# FFFFFFEF L, H# 00000000 L, + +here INIT1_ARRAY - /L / CONSTANT INIT1_LENGTH + + +CREATE INIT2_ARRAY + +H# 140 ( MEM_CNTL ) L, H# 00000000 L, H# 38001A01 L, 0 L, +H# 158 ( MEM_SDRAM_MODE_REG ) L, H# E0000000 L, H# 08320032 L, 0 L, +H# 144 ( MEM_TIMING_CNTL ) L, H# 00000000 L, H# 20123833 L, 0 L, +H# 14C ( MC_AGP_LOCATION ) L, H# 00000000 L, H# 000FFFF0 L, 0 L, +H# 148 ( MC_FB_LOCATION ) L, H# 00000000 L, H# FFFF0000 L, 0 L, +H# 154 ( MEM_INIT_LAT_TIMER ) L, H# 00000000 L, H# 34444444 L, 0 L, +H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# 00000000 L, H# 0A540002 L, 0 L, +H# 910 ( FCP_CNTL ) L, H# 00000000 L, H# 00000004 L, 0 L, +H# 010 ( BIOS_0_SCRATCH ) L, H# FFFFFFFB L, H# 00000004 L, 0 L, +H# D64 ( DISP_OUTPUT_CNTL ) L, H# FFFFFBFF L, H# 00000000 L, 0 L, +H# 2A8 ( TMDS_PLL_CNTL ) L, H# 00000000 L, H# 00000A1B L, 0 L, +H# 800 ( TV_MASTER_CNTL ) L, H# BFFFFFFF L, H# 40000000 L, 0 L, +H# D10 ( DISP_TEST_DBUG_CTL ) L, H# EFFFFFFF L, H# 10000000 L, 0 L, +H# 4DC ( OV0_FLAG_CNTRL ) L, H# FFFFFEFF L, H# 00000100 L, 0 L, +H# 034 ( BUS_CNTL1 ) L, H# 73FFFFFF L, H# 84000000 L, 0 L, +H# 174 ( AGP_CNTL ) L, H# FFEFFF00 L, H# 001E0000 L, 0 L, +H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFF9 L, H# 00000006 L, h# 000A L, +H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFB L, H# 00000000 L, H# 000A L, +H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFD L, H# 00000000 L, 0 L, + +here INIT2_ARRAY - /L / CONSTANT INIT2_LENGTH + +CREATE PLLINIT_ARRAY + +H# 0D L, H# FFFFFFFF L, H# FFFF8000 L, 0 L, +H# 12 L, H# FFFFFFFF L, H# 00350000 L, 0 L, +H# 08 L, H# FFFFFFFF L, H# 00000000 L, 0 L, +H# 2D L, H# FFFFFFFF L, H# 00000000 L, 0 L, +H# 1F L, H# FFFFFFFF L, H# 0000000A L, 5 L, +H# 03 L, H# FFFFFFFF L, H# 0000003C L, 0 L, +H# 0A L, H# FFFFFFFF L, H# 00252504 L, 0 L, +H# 25 L, H# FFFFFFFF L, H# 00000005 L, 0 L, +H# 0E L, H# FFFFFFFF L, H# 04756400 L, 0 L, +H# 0C L, H# FFFFFFFF L, H# 04006401 L, 0 L, +H# 02 L, H# FFFFFFFF L, H# 0000A703 L, 0 L, +H# 0F L, H# FFFFFFFF L, H# 0000051C L, 0 L, +H# 10 L, H# FFFFFFFF L, H# 04000400 L, 5 L, +H# 0E L, H# FFFFFFFD L, H# 00000000 L, 5 L, +H# 0E L, H# FFFFFFFE L, H# 00000000 L, 5 L, +H# 12 L, H# FFFFFFFF L, H# 00350012 L, 5 L, +H# 0F L, H# FFFFFFFE L, H# 00000000 L, 6 L, +H# 10 L, H# FFFFFFFE L, H# 00000000 L, 5 L, +H# 10 L, H# FFFEFFFF L, H# 00000000 L, 6 L, +H# 0F L, H# FFFFFFFD L, H# 00000000 L, 5 L, +H# 10 L, H# FFFFFFFD L, H# 00000000 L, 5 L, +H# 10 L, H# FFFDFFFF L, H# 00000000 L, d# 10 L, +H# 0C L, H# FFFFFFFE L, H# 00000000 L, 6 L, +H# 0C L, H# FFFFFFFD L, H# 00000000 L, 5 L, +h# 0D L, H# FFFFFFFF L, H# FFFF8007 L, 5 L, +H# 08 L, H# FFFFFF3C L, H# 00000000 L, 0 L, +H# 02 L, H# FFFFFFFF L, H# 00000003 L, 0 L, +H# 04 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, +H# 05 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, +H# 06 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, +H# 07 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, +H# 02 L, H# FFFFFFFD L, H# 00000000 L, 6 L, +H# 02 L, H# FFFFFFFE L, H# 00000000 L, 5 L, +h# 08 L, H# FFFFFF3C L, H# 00000003 L, 5 L, +H# 0B L, H# FFFFFFFF L, H# 78000800 L, 0 L, +H# 0B L, H# FFFFFFFF L, H# 00004000 L, 0 L, +h# 01 L, h# FFFFFFFF L, H# 00000010 L, 0 L, + +here PLLINIT_ARRAY - /L / CONSTANT PLLINIT_LENGTH + +CREATE MEMINIT_ARRAY +h# 6FFF0000 L, H# 00004000 L, H# 6FFF0000 L, H# 80004000 L, +h# 6FFF0000 L, H# 00000132 L, H# 6FFF0000 L, H# 80000132 L, +h# 6FFF0000 L, H# 00000032 L, H# 6FFF0000 L, H# 80000032 L, +h# 6FFF0000 L, H# 10000032 L, +here MEMINIT_ARRAY - /L / CONSTANT MEMINIT_LENGTH +: L@+ ( addr -- value addr' ) + +dup l@ swap la1+ +; + +0 VALUE _len + +: ENCODE-ARRAY ( array len -- ) + dup to _len 0 do l@+ swap encode-int rot loop + drop _len 1 - 0 ?do encode+ loop +; + +: andorset ( reg and or -- ) + 2 pick dup reg-rl@ + 3 pick AND 2 pick OR swap reg-rl! 3drop +; + +: INIT1 +H# 0F8 ( CONFIG_MEMSIZE ) H# 00000000 H# 01000000 andorset \ Set 16Mb memory size +H# 1C0 ( MPP_TB_CONFIG ) H# 00FFFFFF H# 07000000 andorset +H# 030 ( BUS_CNTL ) H# 00000000 H# 5133A3B0 andorset +H# 0EC ( RBBM_CNTL ) H# 00000000 h# 00004443 andorset +H# 1D0 ( DEBUG_CNTL ) H# FFFFFFFD H# 00000002 andorset +H# 050 ( CRTC_GEN_CNTL ) H# 00000000 H# 04000000 andorset +H# 058 ( DAC_CNTL ) H# 00000000 H# FF604102 andorset +H# 168 ( PAD_CTLR_STRENGTH ) H# FFFEFFFF H# 00001200 andorset +H# 178 ( MEM_REFRESH_CNTL ) H# 00000000 H# 88888888 andorset +H# 17C ( MEM_READ_CNTL ) H# 00000000 H# B7C20000 andorset +H# 188 ( MC_DEBUG ) H# FFFFFFFF H# 00000000 andorset +H# D00 ( DISP_MISC_CNTL) H# 00FFFFFF H# 5B000000 andorset +H# 88C ( TV_DAC_CNTL ) H# F800FCEF H# 00490200 andorset +H# D04 ( DAC_MACRO_CNTL) H# 00000000 H# 00000905 andorset +H# 284 ( FP_GEN_CNTL ) H# FFFFFFFF H# 00000008 andorset +H# 030 ( BUS_CNTL ) H# FFFFFFEF H# 00000000 andorset +; + + +: INIT2 +H# 140 ( MEM_CNTL ) H# 00000000 H# 38001A01 andorset +H# 158 ( MEM_SDRAM_MODE_REG ) H# E0000000 H# 08320032 andorset +H# 144 ( MEM_TIMING_CNTL ) H# 00000000 H# 20123833 andorset +H# 14C ( MC_AGP_LOCATION ) H# 00000000 H# 000FFFF0 andorset +H# 148 ( MC_FB_LOCATION ) H# 00000000 H# FFFF0000 andorset +H# 154 ( MEM_INIT_LAT_TIMER ) H# 00000000 H# 34444444 andorset +H# 18C ( MC_CHP_IO_OE_CNTL ) H# 00000000 H# 0A540002 andorset +H# 910 ( FCP_CNTL ) H# 00000000 H# 00000004 andorset +H# 010 ( BIOS_0_SCRATCH ) H# FFFFFFFB H# 00000004 andorset +H# D64 ( DISP_OUTPUT_CNTL ) H# FFFFFBFF H# 00000000 andorset +H# 2A8 ( TMDS_PLL_CNTL ) H# 00000000 H# 00000A1B andorset +H# 800 ( TV_MASTER_CNTL ) H# BFFFFFFF H# 40000000 andorset +H# D10 ( DISP_TEST_DEBUG_CTL ) H# EFFFFFFF H# 10000000 andorset +H# 4DC ( OV0_FLAG_CNTRL ) H# FFFFFEFF H# 00000100 andorset +H# 034 ( BUS_CNTL1 ) H# 73FFFFFF H# 84000000 andorset +H# 174 ( AGP_CNTL ) H# FFEFFF00 H# 001E0000 andorset +H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFF9 H# 00000006 andorset h# 000A ms +H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFB H# 00000000 andorset H# 000A ms +H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFD H# 00000000 andorset +; + +: CLK-CNTL-INDEX! 8 ( CLK_CNTL_INDEX ) reg-rl! ; + +: CLK-CNTL-INDEX@ 8 ( CLK_CNTL_INDEX ) reg-rl@ ; + +: PLLWRITEON clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) or clk-cntl-index! ; + +: PLLWRITEOFF clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) not and clk-cntl-index! ; \ Remove PLL_WR_ENABLE + +: CLKDATA! h# 0c ( CLK_CNTL_DATA ) reg-rl! ; + +: CLKDATA@ h# 0c ( CLK_CNTL_DATA ) reg-rl@ ; + +: PLLINDEXSET clk-cntl-index@ h# FFFFFFC0 and or clk-cntl-index! ; + +: PLLSET swap pllindexset clkdata! ; + +: pllandorset ( index and or -- ) + 2 pick pllindexset clkdata@ + 2 pick AND over OR clkdata! 3drop +; + +: PLLINIT +pllwriteon +H# 0D H# FFFF8000 pllset +H# 12 H# 00350000 pllset +H# 08 H# 00000000 pllset +H# 2D H# 00000000 pllset +H# 1F H# 0000000A pllset 5 ms + +H# 03 H# 0000003C pllset +H# 0A H# 00252504 pllset +H# 25 H# 00000005 pllset +H# 0E H# 04756400 pllset +H# 0C H# 04006401 pllset +H# 02 H# 0000A703 pllset +H# 0F H# 0000051C pllset +H# 10 H# 04000400 pllset 5 ms + +H# 0E H# FFFFFFFD 00 pllandorset 5 ms +H# 0E H# FFFFFFFE 00 pllandorset 5 ms +H# 12 H# 00350012 pllset 5 ms +H# 0F H# FFFFFFFE 00 pllandorset 6 ms +H# 10 H# FFFFFFFE 00 pllandorset 5 ms +H# 10 H# FFFEFFFF 00 pllandorset 6 ms +H# 0F H# FFFFFFFD 00 pllandorset 5 ms +H# 10 H# FFFFFFFD 00 pllandorset 5 ms +H# 10 H# FFFDFFFF 00 pllandorset d# 10 ms +H# 0C H# FFFFFFFE 00 pllandorset 6 ms +H# 0C H# FFFFFFFD 00 pllandorset 5 ms +h# 0D h# FFFF8007 pllset 5 ms +H# 08 H# FFFFFF3C 00 pllandorset +H# 02 h# FFFFFFFF 03 pllandorset +H# 04 H# 000381C0 pllset +H# 05 H# 000381F7 pllset +H# 06 H# 000381C0 pllset +H# 07 H# 000381F7 pllset +H# 02 H# FFFFFFFD 00 pllandorset 6 ms +H# 02 h# FFFFFFFE 00 pllandorset 5 ms +h# 08 H# FFFFFF3C 03 pllandorset 5 ms +H# 0B h# 78000800 pllset +H# 0B H# FFFFFFFF h# 4000 pllandorset +h# 01 h# FFFFFFFF h# 0010 pllandorset + +pllwriteoff +; + +: DYNCKE +pllwriteon +H# 14 H# FFFF3FFF H# 30 pllandorset +H# 14 H# FF1FFFFF H# 00 pllandorset +H# 01 h# FFFFFFFF h# 80 pllandorset +H# 0D H# 00000007 pllset 5 ms +h# 2D H# 0000F8C0 pllset +h# 08 H# FFFFFFFF h# C0 pllandorset 5 ms +pllwriteoff +; + +: MEM-MODE@ + h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl@ ; + +: MEM-MODE! + h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl! ; + +: MEM-STATUS@ + H# 150 reg-rl@ ; + +: WAIT-MEM-CMPLT + h# 8000 0 do mem-status@ 3 and 3 = if leave then loop ; + +: INITMEM + + mem-mode@ h# 6FFF0000 and h# 4000 or mem-mode! + mem-mode@ h# 6FFF0000 and h# 80004000 or mem-mode! + wait-mem-cmplt + mem-mode@ h# 6FFF0000 and h# 0132 or mem-mode! + mem-mode@ h# 6FFF0000 and h# 80000132 or mem-mode! + wait-mem-cmplt + mem-mode@ h# 6FFF0000 and h# 0032 or mem-mode! + mem-mode@ h# 6FFF0000 and h# 80000032 or mem-mode! + wait-mem-cmplt + mem-mode@ h# 6FFF0000 and h# 10000032 or mem-mode! +; + + + +: CLR-REG ( reg -- ) + 0 swap reg-rl! + +; +: SET-PALETTE ( -- ) + h# 0 h# b0 pc! \ Reset PALETTE_INDEX + + d# 16 0 do + H# 000000 h# B4 reg-rl! \ Write the PALETTE_DATA ( Auto increments) + H# aa0000 H# B4 reg-rl! + H# 00aa00 H# B4 reg-rl! + H# aa5500 H# B4 reg-rl! + H# 0000aa H# B4 reg-rl! + H# aa00aa H# B4 reg-rl! + H# 00aaaa H# B4 reg-rl! + H# aaaaaa H# B4 reg-rl! + H# 555555 H# B4 reg-rl! + H# ff5555 H# B4 reg-rl! + H# 55ff55 H# B4 reg-rl! + H# ffff55 H# B4 reg-rl! + H# 5555ff H# B4 reg-rl! + H# ff55ff H# B4 reg-rl! + H# 55ffff H# B4 reg-rl! + H# ffffff H# B4 reg-rl! + loop + + ; + +0 VALUE _addr +0 VALUE _color + +: DO-COLOR ( color-addr addr color -- ) + to _color to _addr 0 to _color + 3 0 do _addr i + c@ 2 i - 8 * << _color + to _color loop + _color h# B4 reg-rl! +; + +: SET-COLORS ( addr index #indices -- ) + + swap h# B0 pc! + ( addr #indices ) 0 ?do dup ( index ) i 3 * + DO-COLOR loop + ( addr ) drop ; + +: init-card + + h# FF h# 58 3 + pc! \ + h# 59 pc@ h# FE and h# 59 pc! \ + h# 50 reg-rl@ H# FEFFFFFF AND h# 02000200 or \ Clear 24 set 25 and 8-11 to 2 + h# 50 reg-rl! + h# 4F0063 h# 200 reg-rl! + H# 8C02A2 h# 204 reg-rl! + H# 1Df020C h# 208 reg-rl! + h# 8201EA h# 20C reg-rl! + h# 50 reg-rl@ H# F8FFFFFF AND h# 03000000 or h# 50 reg-rl! + h# 50 h# 22C reg-rl! + set-palette + + \ at this point for some reason mem-addr does not point + \ to the right address and therefore the following command + \ which should probably clean the frame buffer just + \ overwrites everything starting from 0 including the + \ exception vectors + + \ mem-addr h# F0000 0 fill + ; + +: DO-INIT + early-map + enable-card + init1 + pllinit + init2 + initmem + init-card + h# 8020 h# 54 reg-rl! + early-unmap +; + +d# 640 constant /scanline +d# 480 constant #scanlines +/scanline #scanlines * constant /fb + +" okay" encode-string " status" property + +: display-install ( -- ) + is_installed not if + map-csr-base + enable-card + mem-addr to frame-buffer-adr + h# 8020 h# 54 reg-rl! + default-font set-font + /scanline #scanlines d# 100 d# 40 fb8-install + true to is_installed + then +; + +: display-remove ( -- ) ; + +do-init \ Set up the card +\ clear at least 640x480 +10 config-l@ 8 - F0000 0 rfill +init1_array init1_length encode-array " ibm,init1" property +init2_array init2_length encode-array " ibm,init2" property +pllinit_array pllinit_length encode-array " ibm,pllinit" property +meminit_array meminit_length encode-array " ibm,meminit" property +0 0 encode-bytes " iso6429-1983-colors" property +s" display" device-type +/scanline encode-int " width" property + #scanlines encode-int " height" property +8 encode-int " depth" property +/scanline encode-int " linebytes" property + +' display-install is-install +' display-remove is-remove + +: fill-rectangle ( index x y w h -- ) + 2swap -rot /scanline * + frame-buffer-adr + ( index w h fbadr ) + swap 0 ?do ( index w fbadr ) + 3dup swap rot fill ( index w fbadr ) + /scanline + ( index w fbadr' ) + loop + 3drop +; +: draw-rectangle ( addr x y w h -- ) + 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) + swap 0 ?do ( addr w fbadr ) + 3dup swap move ( addr w fbadr ) + >r tuck + swap r> ( addr' w fbadr ) + /scanline + ( addr' w fbadr' ) + loop + 3drop + ; + : read-rectangle ( addr x y w h -- ) + 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) + swap 0 ?do ( addr w fbadr ) + 3dup -rot move ( addr w fbadr ) + >r tuck + swap r> ( addr' w fbadr ) + /scanline + ( addr' w fbadr' ) + loop + 3drop + ; + +: dimensions ( -- width height ) /scanline #scanlines ; + +." ( rn50 )" cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs new file mode 100644 index 000000000..e83a4e04f --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs @@ -0,0 +1,25 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space assign-all-device-bars +my-space pci-device-props +my-space pci-set-irq-line + +\ set Memory Write and Invalidate Enable, SERR# Enable (see PCI 3.0 Spec Chapter 6.2.2 device control) + +7 4 config-w! + + +\ Citrine storage controller. +s" citrine" + +include citrine.fs diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs new file mode 100644 index 000000000..1db6bdafc --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs @@ -0,0 +1,23 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space assign-all-device-bars +my-space pci-device-props +my-space pci-set-irq-line + +\ set Memory Write and Invalidate Enable, SERR# Enable (see PCI 3.0 Spec Chapter 6.2.2 device control) +7 4 config-w! + +\ Citrine storage controller. +s" obsidian" + +include citrine.fs diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs new file mode 100644 index 000000000..e540cba9c --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs @@ -0,0 +1,34 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ IO-APIC init + +s" io-apic" 2dup device-name device-type +my-space pci-class-name type s" ( 8131 IO-APIC )" type + +pci-io-enable +pci-mem-enable +pci-master-enable + +my-space b rshift \ Get slot #. +dup c lshift fec00000 or \ Calculate base address. +dup 48 config-l! 0 4c config-l! \ Set base address. +03 44 config-b! \ Enable IO-APIC. + +s" ioapic.fs" included + +2 lshift 14 + \ Calculate first IRQ #. +init-ioapic \ Set IRQs. + +my-space pci-device-props + +cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs new file mode 100644 index 000000000..4126ca241 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs @@ -0,0 +1,50 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space assign-all-device-bars +my-space pci-device-props +my-space pci-set-irq-line + +\ See the "ISA/EISA/ISA-PnP" OF binding document. + +.( isa) + +s" isa" 2dup device-name device-type +\ We have to say it's ISA i.s.o. LPC, as otherwise Linux can't find +\ the serial port for its console. Linux uses the name instead of the +\ device type (and it completely ignores any "compatible" property). + +2 encode-int s" #address-cells" property +1 encode-int s" #size-cells" property + +\ We assume all ISA addresses to refer to I/O space. +: decode-unit 1 hex-decode-unit 1 ; +: encode-unit drop 1 hex-encode-unit ; + +\ 32kB of ISA I/O space. +1 encode-int my-space 01000000 + encode-64+ 0 encode-int+ 0 encode-int+ +8000 encode-int+ s" ranges" property + +: open true ; +: close ; + +\ There's a SIO chip on the LPC bus. +INCLUDE sio.fs + +\ There's also an Atmel TPM chip on JS21 +\ removed on Bimini Pass 2 and therefore disabled on all Biminis +u4? bimini? not and ?INCLUDE tpm.fs + +\ And finally there's the IPMI interface to the BMC. +u4? ?INCLUDE ipmi-kcs.fs + +cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs new file mode 100644 index 000000000..fdae920c3 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs @@ -0,0 +1,23 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +my-space assign-all-device-bars +my-space pci-device-props +my-space pci-set-irq-line + +7 4 config-w! + +s" ide" type cr + +include ide.fs + +cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs new file mode 100644 index 000000000..ef782c948 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs @@ -0,0 +1,23 @@ +\ ***************************************************************************** +\ * Copyright (c) 2013 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ Handle bcm57xx device + +s" bcm57xx [ net ]" type cr + +my-space pci-device-generic-setup + +pci-io-enable + +s" bcm57xx.fs" included + +pci-device-disable diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs b/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs new file mode 100644 index 000000000..92851cd58 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs @@ -0,0 +1,235 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ define function pointer as forward declaration for get-interrupt-line +\ this is board wireing and southbridge dependent +\ returns the wired interrupt line for this config addr +\ ( config-addr -- irq-line ) +DEFER pci-get-irq-line + +\ define function pointer as forward declaration for get-interrupt-sense-type +\ this is board wireing and southbridge dependent +\ returns the wired interrupt sense type for this config addr +\ 0 - Edge rising +\ 1 - Level low +\ 2 - Level high +\ 3 - Edge falling +\ ( config-addr -- irq-sense ) +DEFER pci-get-irq-sense + + +\ ***************************************************************************** +\ Generic IRQ routines +\ ***************************************************************************** + + + +: unknown-slot ( -- 0 ) +\ cr pci-vec ABORT" Unknown slot " + 0 +; +\ 0c s" /ht/@1/@2" PCI-X INTA & INTC Pnpirq0 -> irq12 +\ 0e s" /ht/@1/@2" PCI-X INTB & INTD Pnpirq1 -> irq14 +\ 10 s" /ht/@8,1" ATA +\ 0f s" /ht/@1/@1" Obsidian Pnpirq2 -> irq15 +\ 10 s" /ht/@7/@2" Video / Exar Serial PirqA +\ 11 s" /ht/@2/@4" Ethernet PirqB +\ 12 s" /ht/@2/@4,1" Ethernet PirqC +\ 13 s" /ht/@7/@0" USB PirqD +\ 13 s" /ht/@7/@0,1" USB PirqD +\ 13 s" /ht/@7/@0,2" USB PirqD + +\ 14 s" /ht/@3/@0" PCIe gpio28 +\ 15 s" /ht/@4/@0" PCIe gpio29 +\ 16 s" /ht/@5/@0" PCIe gpio30 +\ 17 s" /ht/@6/@0" PCIe gpio31 + + +\ ----------------------------------------------------------------------------- +\ Get the interrupt pin for a device on ht u4 +: u4-get-irq-line ( config-addr -- irq-line ) +\ cr s" u4-get-irq-line " type + pci-device-vec c@ CASE + 1 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 1 OF f ENDOF + 2 OF dup pci-interrupt@ CASE + 1 OF c ENDOF + 3 OF e ENDOF + 2 OF c ENDOF + 4 OF e ENDOF + ENDCASE + ENDOF + dup OF unknown-slot ENDOF + ENDCASE + ELSE + unknown-slot + THEN + ENDOF + 2 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 4 OF dup pci-addr2fn 1 >= IF 12 ELSE 11 THEN ENDOF + dup OF unknown-slot ENDOF + ENDCASE + ELSE + unknown-slot + THEN + ENDOF + 3 OF 14 ENDOF + 4 OF 15 ENDOF + 5 OF 16 ENDOF + 6 OF 17 ENDOF + 7 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 0 OF 13 ENDOF + 2 OF 10 ENDOF + dup OF unknown-slot ENDOF + ENDCASE + ELSE + unknown-slot + THEN + ENDOF + 8 OF 10 ENDOF + dup OF unknown-slot ENDOF + ENDCASE + swap drop +; + +\ ----------------------------------------------------------------------------- +\ Get the interrupt sense type for a device on ht u4 +: u4-get-irq-sense ( config-addr -- irq-sense ) +\ cr s" u4-get-irq-sense " type + u4-get-irq-line CASE + 0c OF 00 ENDOF + 0e OF 00 ENDOF + dup OF 01 ENDOF + ENDCASE +; + +\ 10 s" /ht/@4,1" set-pci-interrupt \ ATA +\ 13 s" /ht/@3/@0" set-pci-interrupt \ USB +\ 13 s" /ht/@3/@0,1" set-pci-interrupt \ USB +\ 13 s" /ht/@3/@0,2" set-pci-interrupt \ USB +\ 1c s" /ht/@2/@1" set-pci-interrupt \ Ethernet +\ 1d s" /ht/@2/@1,1" set-pci-interrupt \ Ethernet + +\ ----------------------------------------------------------------------------- +\ Get the interrupt pin for a device on ht u3 +: u3-get-irq-line ( config-addr -- irq-line ) +\ cr s" u3-get-irq-line " type + pci-device-vec c@ CASE + 2 OF pci-device-vec-len 1 >= IF + pci-device-vec 1+ c@ CASE + 1 OF dup pci-addr2fn 1 >= IF 1d ELSE 1c THEN ENDOF + dup OF unknown-slot ENDOF + ENDCASE + ELSE + unknown-slot + THEN + ENDOF + 3 OF 13 ENDOF + 4 OF 10 ENDOF + dup OF unknown-slot ENDOF + ENDCASE + swap drop +; + +\ ----------------------------------------------------------------------------- +\ Get the interrupt sense type for a device on ht u3 +: u3-get-irq-sense ( config-addr -- irq-sense ) +\ cr s" u3-get-irq-sense " type + u3-get-irq-line CASE + dup OF 01 ENDOF + ENDCASE +; + + + +\ ----------------------------------------------------------------------------- +\ Get the interrupt pin for a device on attu +: pcie-get-irq-line ( config-addr -- irq-line ) +\ cr s" pcie-get-irq-line " type + drop + 3 +; + + +\ ----------------------------------------------------------------------------- +\ Get the interrupt sense type for a device on attu +: pcie-get-irq-sense ( config-addr -- irq-sense ) +\ cr s" pcie-get-irq-sense " type + drop + 01 +; + +\ ----------------------------------------------------------------------------- +\ Set up the special routines for HT irq handling +: ht-irq-init ( -- ) +\ cr s" ht-irq-init " type + u4? IF + ['] u4-get-irq-line TO pci-get-irq-line + ['] u4-get-irq-sense TO pci-get-irq-sense + ELSE + ['] u3-get-irq-line TO pci-get-irq-line + ['] u3-get-irq-sense TO pci-get-irq-sense + THEN +; + +\ ----------------------------------------------------------------------------- +\ Set up the special routines for PCI-e irq handling +: pcie-irq-init ( -- ) +\ cr s" pcie-irq-init " type + ['] pcie-get-irq-sense TO pci-get-irq-sense + ['] pcie-get-irq-line TO pci-get-irq-line +; + +\ ----------------------------------------------------------------------------- +\ Set up the special routines for irq handling +0 VALUE mpic +: pci-irq-init ( mpic puid -- mpic ) + over TO mpic + 18 rshift FF and + CASE + F1 OF pcie-irq-init ENDOF + F2 OF ht-irq-init ENDOF + dup OF ABORT" Wrong PUID! in pci-irq-init" ENDOF + ENDCASE +; + +\ ----------------------------------------------------------------------------- +\ Set the interrupt pin for a device +: pci-set-irq-line ( config-addr -- ) +\ cr pci-vec + dup pci-get-irq-line +\ ." ->" dup . + swap pci-irq-line! +; + +\ ----------------------------------------------------------------------------- +\ Add an irq entry for the device at config-addr into the irq map +\ each entry consists of 7 integer values +\ Structure of an entry: +\ +----------+---+---+------------+--------------+---------+---------------+ +\ Number# | 0 | 1 | 2 | 3 | 4 | 5 | 6 | +\ +----------+---+---+------------+--------------+---------+---------------+ +\ meaning | config | | | int# | phandle | intr nr | pos edge (0) | +\ | addr | | | (1=a, 2=b, | intr contr | | act ll (1) | +\ +----------+---+---+------------+--------------+---------+---------------+ +\ value | pci slot | 0 | 0 | 1 | mpic | 7 | 0|1 | +\ +----------+---+---+------------+--------------+---------+---------------+ +: pci-gen-irq-entry ( prop-addr prop-len config-addr -- prop-addr prop-len ) + dup >r encode-int+ 0 encode-64+ \ config addr + r@ pci-interrupt@ encode-int+ \ interrupt type + mpic encode-int+ \ phandle to MPIC + r@ pci-irq-line@ encode-int+ \ interrupt number + r> pci-get-irq-sense encode-int+ \ trigger type +; diff --git a/qemu/roms/SLOF/board-js2x/slof/rtas.fs b/qemu/roms/SLOF/board-js2x/slof/rtas.fs new file mode 100644 index 000000000..0a90c2903 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/rtas.fs @@ -0,0 +1,240 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +#include +#include +#include +#include +#include + +\ for update-flash +: (get-flashside) ( -- flashside ) rtas-get-flashside ; + +' (get-flashside) to get-flashside + +\ remember the current flashside +get-flashside to flashside? + +\ for update-flash +: (set-flashside) ( flashside -- status ) + dup rtas-set-flashside = IF 0 ELSE -1 THEN +; + +' (set-flashside) to set-flashside + +: rtas-ibm-read-pci-config ( size puid bus devfn off -- x ) + [ s" ibm,read-pci-config" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 4 rtas-cb rtas>nargs l! + 2 rtas-cb rtas>nret l! + swap 8 lshift or swap 10 lshift or rtas-cb rtas>args0 l! + dup 20 rshift rtas-cb rtas>args1 l! + ffffffff and rtas-cb rtas>args2 l! + rtas-cb rtas>args3 l! + enter-rtas + rtas-cb rtas>args5 l@ +; + +: rtas-fetch-cpus ( mask -- status ) + [ s" rtas-fetch-slaves" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 1 rtas-cb rtas>nargs l! + 1 rtas-cb rtas>nret l! + rtas-cb rtas>args0 l! + 0 rtas-cb rtas>args1 l! + enter-rtas + rtas-cb rtas>args1 l@ +; + +: rtas-stop-bootwatchdog ( -- status ) + [ s" rtas-stop-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 0 rtas-cb rtas>nargs l! + 1 rtas-cb rtas>nret l! + enter-rtas + rtas-cb rtas>args0 l@ +; + +: rtas-set-bootwatchdog ( seconds -- ) + [ s" rtas-set-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 1 rtas-cb rtas>nargs l! + 0 rtas-cb rtas>nret l! + rtas-cb rtas>args0 l! + enter-rtas +; + +' rtas-set-bootwatchdog to set-watchdog + +: rtas-dump-flash ( offset cnt -- ) + [ s" rtas-dump-flash" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 2 rtas-cb rtas>nargs l! + 0 rtas-cb rtas>nret l! + rtas-cb rtas>args0 l! + rtas-cb rtas>args1 l! + enter-rtas +; + +create blist 50 allot +blist 50 erase + +: build-blocklist_old + \ set version + 1 blist c! + \ set length of block list + 50 blist 7 + c! + \ no more block list + 0000000000000000 blist 8 + ! + \ first block + get-load-base 0 + blist 10 + ! + 80000 blist 18 + ! + get-load-base 80000 + blist 20 + ! + 80000 blist 28 + ! + get-load-base 100000 + blist 30 + ! + 80000 blist 38 + ! + get-load-base 180000 + blist 40 + ! + 8006C blist 48 + ! +; + +80000 constant _block_size + +: build-blocklist + \ set length of block list + \ length of flashfs at load-base is at offset 30... get it... + get-load-base 30 + @ + \ calculate the number of blocks we need + _block_size / 1 + + \ total number of blocks is 2 (for header and block_list extension + (number of blocks for flashfs * 2 (1 for address 1 for length)) + 2 * 2 + 8 * blist ! + \ set version ( in first byte only ) + 1 blist c! + \ no more block list + 0000000000000000 blist 8 + ! + \ length of flashfs at load-base is at offset 30... get it... + get-load-base 30 + @ + \ i define one block to be 64K, so calculate the number of blocks we need and loop over them + _block_size / 1 + 0 do + get-load-base _block_size i * + \ which position of load-base to store + blist 10 + \ at what offset of blist ( 0x8 + for header 0x8 + for extension ) + i 10 * + \ for each loop we have done 0x10 + + ! \ store it + get-load-base 30 + @ + _block_size i * - \ remaining length + dup _block_size > + IF \ is the remaining length > block size + drop _block_size \ then store the block size as length + ELSE + \ do nothing (store remaining length) + THEN + blist 10 + \ store the length at + i 10 * + \ correct blist offset + 8 + \ + 8 (we have stored address, now the length) + ! \ store it + loop +; + + + +: build-blocklist-v0_old + \ set version + 0 blist c! + 48 blist 7 + c! + \ first block + get-load-base 0 + blist 8 + ! + 80000 blist 10 + ! + get-load-base 80000 + blist 18 + ! + 80000 blist 20 + ! + get-load-base 100000 + blist 28 + ! + 80000 blist 30 + ! + get-load-base 180000 + blist 38 + ! + 8006C blist 40 + ! +; + +: build-blocklist-v0 + \ set length of block list + \ length of flashfs at load-base is at offset 30... get it... + get-load-base 30 + @ + \ calculate the number of blocks we need + _block_size / 1 + + \ total number of blocks is 1 (for header + (number of blocks for flashfs * 2 (1 for address 1 for length)) + 2 * 1 + 8 * blist ! + \ length of flashfs at load-base is at offset 30... get it... + get-load-base 30 + @ + \ i define one block to be 64K, so calculate the number of blocks we need and loop over them + _block_size / 1 + 0 do + get-load-base _block_size i * + \ which position of load-base to store + blist 8 + \ at what offset of blist ( 0x8 + for header) + i 10 * + \ for each loop we have done 0x10 + + ! \ store it + get-load-base 30 + @ + _block_size i * - \ remaining length + dup _block_size > + IF \ is the remaining length > block size + drop _block_size \ then store the block size as length + ELSE + \ do nothing (store remaining length) + THEN + blist 8 + \ store the length at + i 10 * + \ correct blist offset + 8 + \ + 8 (we have stored address, now the length) + ! \ store it + loop +; + + +: yy + build-blocklist + blist rtas-ibm-update-flash-64-and-reboot +; + +: yy0 + build-blocklist-v0 + blist rtas-ibm-update-flash-64-and-reboot +; + +: rtas-ibm-update-flash-64 ( block-list -- status ) + [ s" ibm,update-flash-64" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 2 rtas-cb rtas>nargs l! + 1 rtas-cb rtas>nret l! + rtas-cb rtas>args0 l! + \ special unofficial parameter: if this is set to 1, the rtas function will not check, wether + \ we are on the perm side... this is needed for "update-flash -c" to work... + 1 rtas-cb rtas>args1 l! + enter-rtas + rtas-cb rtas>args2 l@ +; + +\ for update-flash +: flash-write ( image-address -- status) + load-base-override >r to load-base-override build-blocklist-v0 + blist rtas-ibm-update-flash-64 + r> to load-base-override 0= IF true ELSE false THEN +; + +: commit 1 rtas-ibm-manage-flash-image ; +: reject 0 rtas-ibm-manage-flash-image ; + +: rtas-ibm-validate-flash-image ( image-to-commit -- status ) + [ s" ibm,validate-flash-image" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 2 rtas-cb rtas>nargs l! + 2 rtas-cb rtas>nret l! + rtas-cb rtas>args0 l! + enter-rtas + rtas-cb rtas>args1 l@ +; + +: rtas-get-blade-descr ( address size -- len status ) + [ s" rtas-get-blade-descr" rtas-get-token ] LITERAL rtas-cb rtas>token l! + 2 rtas-cb rtas>nargs l! + 2 rtas-cb rtas>nret l! + rtas-cb rtas>args1 l! + rtas-cb rtas>args0 l! + enter-rtas + rtas-cb rtas>args2 l@ + rtas-cb rtas>args3 l@ +; diff --git a/qemu/roms/SLOF/board-js2x/slof/rtc.fs b/qemu/roms/SLOF/board-js2x/slof/rtc.fs new file mode 100644 index 000000000..861b3f9ff --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/rtc.fs @@ -0,0 +1,59 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ National Semiconductor SIO. +\ See http://www.national.com/pf/PC/PC87417.html for the datasheet. +\ PC87417.pdf +\ moved the RTC initialisation from the device tree to a much earlier point +\ so that the RTC can be accessed before device tree is generated + +\ Enable the RTC, set its address at 1070 +\ see PC87417.pdf page 39 (chapter 3.2.3) +10 7 siocfg! +1 30 siocfg! +1070 wbsplit nip dup 60 siocfg! 62 siocfg! + +: rtc@ ( offset -- value ) + 1070 io-c! 1071 io-c@ +; + +: rtc! ( value offset -- ) + 1070 io-c! 1071 io-c! +; + +\ Set sane configuration; BCD mode is required by Linux. +\ PC87417.pdf page 153 (chapter 8.3.13) - RTC Control Register A +\ 20 - Divider Chain Control = Normal Operation +20 0a rtc! +\ PC87417.pdf page 155 (chapter 8.3.14) - RTC Control Register B +\ 02 - 24-hour format enabled +02 0b rtc! +\ PC87417.pdf page 156 (chapter 8.3.15) - RTC Control Register C +00 0c rtc! + +\ read from the rtc and do the bcd-to-bin conversion +: rtc-bin@ ( offset -- value ) + rtc@ bcd-to-bin +; + +\ to be compatible with the cell boards we provide a .date word +\ .date prints the current date and time on the firmware prompt +: .date ( -- ) + 0 rtc-bin@ ( seconds ) + 2 rtc-bin@ + 4 rtc-bin@ + 7 rtc-bin@ + 8 rtc-bin@ ( seconds minutes hours day month ) + 9 rtc-bin@ d# 1900 + dup d# 1970 < IF d# 100 + THEN + decimal 4 0.r 2d emit 2 0.r 2d emit 2 0.r space + 2 0.r 3a emit 2 0.r 3a emit 2 0.r hex +; diff --git a/qemu/roms/SLOF/board-js2x/slof/serial.fs b/qemu/roms/SLOF/board-js2x/slof/serial.fs new file mode 100644 index 000000000..98b2f2939 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/serial.fs @@ -0,0 +1,48 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ Serial console. Enabled very early. +\ remember last console used +CREATE lastser 4 allot 0 lastser l! + +\ On JS21, use serial port 2. Detect Maui by looking at the SIO version. +20 siocfg@ f2 = IF 2f8 ELSE 3f8 THEN + +: >serial LITERAL + ; +: js21? -2f8 >serial 0= ; +: serial! js21? IF 2dup 2f8 + io-c! THEN 3f8 + io-c! ; +: serial1@ 3f8 + io-c@ ; +: serial2@ 2f8 + io-c@ ; + +: serial-init 0 1 serial! 0 2 serial! + 80 3 serial! d# 115200 swap / 0 serial! 0 1 serial! + 3 3 serial! 3 4 serial! ; +: serial-emit BEGIN 5 serial1@ 20 and UNTIL + js21? IF BEGIN 5 serial2@ 20 and UNTIL THEN 0 serial! ; +: serial1-key? 5 serial1@ 1 and 0<> ; +: serial2-key? 5 serial2@ 1 and 0<> ; +: serial1-key serial1-key? dup IF 0 serial1@ swap 0 lastser l! THEN ; +: serial2-key serial2-key? dup IF 0 serial2@ swap 1 lastser l! THEN ; +: serial-key BEGIN serial1-key dup IF ELSE js21? IF drop serial2-key THEN THEN UNTIL ; +: serial-key? serial1-key? js21? IF serial2-key? or THEN ; + +\ : serial-key BEGIN 5 serial2@ 1 and UNTIL 0 serial2@ ; +\ : serial-key? 5 serial2@ 1 and 0<> ; + +d# 19200 serial-init +' serial-emit to emit +' serial-key to key +' serial-key? to key? + +( .( SLOF) +\ .( has started execution, serial console @ ) 0 >serial . diff --git a/qemu/roms/SLOF/board-js2x/slof/sio.fs b/qemu/roms/SLOF/board-js2x/slof/sio.fs new file mode 100644 index 000000000..554cf83e3 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/sio.fs @@ -0,0 +1,85 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ National Semiconductor SIO. +\ See http://www.national.com/pf/PC/PC87417.html for the datasheet. + +\ We use both serial ports, and the RTC. + +\ See 3.7.5. +new-device 3f8 1 set-unit + +s" serial" 2dup device-name device-type + +\ Enable this UART. +3 7 siocfg! 1 30 siocfg! + +\ 8 bytes of ISA I/O space +my-unit encode-int rot encode-int+ 8 encode-int+ s" reg" property +d# 19200 encode-int s" current-speed" property +44 encode-int 0 encode-int+ s" interrupts" property + +: open true ; +: close ; +: write ( adr len -- actual ) tuck type ; +: read ( adr len -- actual ) 0= IF drop 0 EXIT THEN + serial-key? 0= IF 0 swap c! -2 EXIT THEN + serial-key swap c! 1 ; + +finish-device + + +new-device 2f8 1 set-unit + +s" serial" 2dup device-name device-type + +\ Enable this UART. +2 7 siocfg! 1 30 siocfg! + +\ 8 bytes of ISA I/O space +my-unit encode-int rot encode-int+ 8 encode-int+ s" reg" property +d# 19200 encode-int s" current-speed" property +43 encode-int 0 encode-int+ s" interrupts" property + +: open true ; +: close ; +: write ( adr len -- actual ) tuck type ; +: read ( adr len -- actual ) 0= IF drop 0 EXIT THEN + serial-key? 0= IF 0 swap c! -2 EXIT THEN + serial-key swap c! 1 ; + +finish-device + + + +\ See the "Device Support Extensions" OF Recommended Practice document. +new-device 1070 1 set-unit + +s" rtc" 2dup device-name device-type +\ Following is for Linux, to recognize this RTC: +s" pnpPNP,b00" compatible + +: rtc! my-space io-c! my-space 1+ io-c! ; +: rtc@ my-space io-c! my-space 1+ io-c@ ; + +\ 10 bytes of ISA I/O space, at 1070. +my-unit encode-int rot encode-int+ 10 encode-int+ s" reg" property + +: open true ; +: close ; + +\ XXX: dummy methods. +: get-time ( -- sec min hr day mth yr ) 38 22 c 1 1 d# 1973 ; +: set-time ( sec min hr day mth yr -- ) 3drop 3drop ; + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/tpm.fs b/qemu/roms/SLOF/board-js2x/slof/tpm.fs new file mode 100644 index 000000000..69b9bc409 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/tpm.fs @@ -0,0 +1,63 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ Atmel TPM. + +new-device 500 1 set-unit + +s" tpm" 2dup device-name device-type + +s" AT97SC3201" compatible + +\ 2 bytes of ISA I/O space +my-unit encode-int rot encode-int+ 2 encode-int+ s" reg" property + +: >tpm 4e io-c! ; +: tpm@ >tpm 4f io-c@ ; +: tpm! >tpm 4f io-c! ; + +: dump-tpm 11 0 DO cr i 2 .r space i tpm@ 2 0.r LOOP ; + +my-address wbsplit 9 tpm! 8 tpm! \ set base address +0 a tpm! \ disable serint + +\ Now we need to execute TPM_Startup. +CREATE startup-cmd +0 c, c1 c, +0 c, 0 c, 0 c, c c, +0 c, 0 c, 0 c, 99 c, \ TPM_ORD_Startup +0 c, 1 c, \ TCPA_ST_CLEAR + +: send ( addr len -- ) bounds ?DO i c@ 500 io-c! LOOP ; +: wait-for-ready ( -- ) BEGIN 501 io-c@ 3 and 2 = UNTIL ; +: recv-verbose ( -- ) + cr ." TPM result: " + 500 io-c@ 2 0.r 500 io-c@ 2 0.r space + 500 io-c@ 500 io-c@ 500 io-c@ 500 io-c@ + bljoin lbflip 6 - dup 8 0.r space 0 + ?DO 500 io-c@ . LOOP +; + +: recv ( -- ) + 500 io-c@ drop 500 io-c@ drop + 500 io-c@ 500 io-c@ 500 io-c@ 500 io-c@ + bljoin lbflip 6 - 0 + ?DO 500 io-c@ drop LOOP +; + +startup-cmd c send wait-for-ready recv + +: open true ; +: close ; + +finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/tree.fs b/qemu/roms/SLOF/board-js2x/slof/tree.fs new file mode 100644 index 000000000..040d99f09 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/tree.fs @@ -0,0 +1,225 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +400 cp + +0 value puid + +: >conf-rtas ( config-addr -- config-addr ) + puid f2000000 >= IF + ffffff AND \ Mask away highest byte for normal PCI + dup ffff > IF + 1000000 + + THEN + THEN + puid + +; + +: rtas-config-b@ ( config-addr -- value ) >conf-rtas rb@ ; +: rtas-config-b! ( value config-addr -- ) >conf-rtas rb! ; +: rtas-config-w@ ( config-addr -- value ) >conf-rtas rw@-le ; +: rtas-config-w! ( value config-addr -- ) >conf-rtas rw!-le ; +: rtas-config-l@ ( config-addr -- value ) >conf-rtas rl@-le ; +: rtas-config-l! ( value config-addr -- ) >conf-rtas rl!-le ; + +440 cp + +#include "pci-scan.fs" + +480 cp + +\ The root of the device tree and some of its kids. + +s" /" find-device +\ read model string from VPD +vpd-read-model ( straddr strlen ) +\ if it is a bimini, we replace the "IBM," in the model string with "TSS," +bimini? IF + 2dup drop 4 ( straddr strlen str 4 ) \ for string comparison: only first 4 bytes ("IBM,") + \ string comparison + s" IBM," str= IF + \ model starts with "IBM,", we replace it with "TSS," + 2dup drop s" TSS," ( straddr strlen straddr replacestr len ) + rot swap ( straddr strlen replacestr straddr len ) \ correct order for move: src dest len + move ( straddr strlen ) \ now we have TSS, at beginning of str... + THEN +THEN +\ store the model string +encode-string s" model" property + +2 encode-int s" #address-cells" property +2 encode-int s" #size-cells" property + +\ XXX: what requires this? Linux? +0 encode-int f8040000 encode-int+ +0 encode-int+ f8050000 encode-int+ s" platform-open-pic" property + +\ Yaboot is stupid. Without this, it can't/won't find /etc/yaboot.conf. +s" chrp SLOF based 970 blade" device-type + +\ add more information to the compatible property +js21? IF + bimini? IF + s" IBM,Bimini" + ELSE + s" IBM,JS21" + THEN +ELSE + s" IBM,JS20" +THEN encode-string +\ To get linux-2.6.10 and later to work out-of-the-box. +s" Momentum,Maple" encode-string encode+ s" compatible" property + + +\ See 3.6.5, and the PowerPC OF binding document. +new-device +s" mmu" 2dup device-name device-type +0 0 s" translations" property + +: open true ; +: close ; + +finish-device + +new-device flash-addr set-unit-64 + s" flash" 2dup device-name device-type + 0 encode-int flash-addr encode-int+ + 0 encode-int+ get-flash-size encode-int+ s" reg" property + get-flash-size encode-int s" #bytes" property + 0 0 s" used-by-rtas" property + : open true ; + : close ; +finish-device + +4a0 cp + +new-device nvram-base set-unit-64 + s" nvram" 2dup device-name device-type + nvram-size encode-int s" #bytes" property + 0 encode-int nvram-base encode-int+ + 0 encode-int+ nvram-size encode-int+ s" reg" property + get-node node>path s" nvram" 2swap set-alias + : open true ; + : close ; +finish-device + +4c0 cp + +#include "memory.fs" + +500 cp + +#include "mpic.fs" + +580 cp + +#include "dart.fs" + +5a0 cp + +#include "i2c.fs" + +600 cp +get-node device-end +620 cp +\ if it is js21/bimini the fbuffer code is included +u4? ?include fbuffer.fs +640 cp +set-node + +690 cp + +#include "ht.fs" + +6b0 cp + +u4? ?include attu.fs +6c0 cp + +\ See the PowerPC OF binding document. +new-device +s" cpus" device-name + +1 encode-int s" #address-cells" property +0 encode-int s" #size-cells" property + +: decode-unit 1 hex-decode-unit ; +: encode-unit 1 hex-encode-unit ; + +cpu-mask @ 40 0 DO dup 1 and IF +i s" cpu.fs" INCLUDED THEN u2/ LOOP drop + +: open true ; +: close ; + +finish-device + +master-cpu s" /cpus/@" rot (u.) $cat open-dev encode-int s" cpu" set-chosen +s" /memory" open-dev encode-int s" memory" set-chosen + +6e0 cp + +new-device + s" rtas" device-name + + rtas-size encode-int s" rtas-size" property + 00000001 encode-int s" ibm,flash-block-version" property + 00000001 encode-int s" rtas-event-scan-rate" property + rtas-create-token-properties + 00000001 encode-int s" rtas-version" property + +: open true ; +: close ; + +: instantiate-rtas instantiate-rtas ; + +finish-device + +700 cp + +device-end + +\ Hack for AIX. +s" /options" find-device + \ s" 33554432" encode-string s" load-base" property + s" 16384" encode-string s" load-base" property +device-end + +\ See 3.5. +s" /openprom" find-device + s" SLOF," slof-build-id here swap rmove here slof-build-id nip $cat encode-string s" model" property + 0 0 s" relative-addressing" property + flashside? 1 = IF s" T" ELSE s" P" THEN + encode-string s" ibm,fw-bank" property + takeover? not IF + 0 set-flashside drop + read-version-and-date s" ibm,fw-perm-bank" property + 1 set-flashside drop + read-version-and-date s" ibm,fw-temp-bank" property + flashside? set-flashside drop + THEN +device-end + +s" /aliases" find-device + : open true ; + : close ; +device-end + +s" /mmu" open-dev encode-int s" mmu" set-chosen + +#include "available.fs" + +#include + +u3? IF s" /ht/isa/serial@3f8" io + ELSE s" /ht/isa/serial@2f8" io THEN + diff --git a/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs b/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs new file mode 100644 index 000000000..0f8b1eef6 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs @@ -0,0 +1,313 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ U4 DDR2 memory controller. + +cr .( Setting up memory controller...) + + +\ First, I2C access to the SPDs. + +: >i2c f8001000 + ; +: i2c@ >i2c rl@ ; +: i2c! >i2c rl! ; + +: .i2c 80 0 DO i i2c@ . 10 +LOOP ; + +: i2c-addr ( addr -- ) 50 i2c! 2 10 i2c! BEGIN 30 i2c@ 2 and UNTIL ; +: i2c-addr-subaddr ( addr suba -- ) 60 i2c! i2c-addr ; +: i2c-stop ( -- ) BEGIN 30 i2c@ dup 30 i2c! 4 and UNTIL ; +: i2c-nak? ( -- failed? ) 20 i2c@ 2 and 0= dup IF i2c-stop THEN ; +: i2c-short? ( -- failed? ) 30 i2c@ 4 and 0<> dup IF 0 10 i2c! i2c-stop THEN ; +: i2c-aak-if-more ( n -- ) 1 <> 1 and 10 i2c! ; + +: i2c-sub-read ( buf len addr suba -- error? ) + c 0 i2c! >r 1 or r> i2c-addr-subaddr i2c-nak? IF 2drop true EXIT THEN + dup i2c-aak-if-more 2 30 i2c! + BEGIN + 30 i2c@ 1 and IF + 1- >r 70 i2c@ over c! char+ r> + dup 0= IF i2c-stop 2drop false EXIT THEN + dup i2c-aak-if-more 1 30 i2c! THEN + i2c-short? IF 2drop true EXIT THEN + AGAIN ; + + +\ What slots are filled with working memory (bitmask). + +f VALUE dimms-valid +: dimm-invalid 1 swap lshift invert dimms-valid and to dimms-valid ; +: dimm-invalid dup dimm-invalid 2 xor dimm-invalid ; \ DIMMs are paired +: dimm-valid? 1 swap lshift dimms-valid and ; +: dimm( +comp postpone 4 postpone 0 postpone DO + postpone i postpone dimm-valid? postpone IF ; immediate +: )dimm postpone THEN postpone LOOP -comp ; immediate + + +\ The data from the SPDs. + +CREATE spds 100 allot +: spd@ ( dimm# off -- value ) swap 40 * + spds + c@ ; + +CREATE addresses a0 c, a4 c, a2 c, a6 c, +dimm( spds i 40 * + 40 addresses i + c@ 0 i2c-sub-read IF i dimm-invalid THEN )dimm + + +\ Accessors. + +: spd>rows 3 spd@ ; +: spd>cols 4 spd@ ; +: spd>ranks 5 spd@ 7 and 1+ ; +: spd>width d spd@ ; +: spd>banks 11 spd@ ; +: spd>cas 12 spd@ ; \ bit mask of allowable CAS latencies +: spd>trp 1b spd@ ; \ in units of 0.25 ns +: spd>trrd 1c spd@ ; \ in units of 0.25 ns +: spd>trcd 1d spd@ ; \ in units of 0.25 ns +: spd>tras 1e spd@ ; \ in units of 1 ns +: spd>twr 24 spd@ ; \ in units of 0.25 ns +: spd>twtr 25 spd@ ; \ in units of 0.25 ns +: spd>trtp 26 spd@ ; \ in units of 0.25 ns +: spd>trc 29 spd@ ; \ in units of 1 ns XXX: should also look at byte 28 +: spd>trfc 2a spd@ ; \ in units of 1 ns XXX: should also look at byte 28 + +cr .( rows cols ranks width banks trp trrd trcd tras twr twtr trtp trc trfc) +cr .( =====================================================================) +decimal +dimm( cr +i spd>rows 4 .r i spd>cols 5 .r i spd>ranks 6 .r i spd>width 6 .r +i spd>banks 6 .r i spd>trp 4 .r i spd>trrd 5 .r i spd>trcd 5 .r +i spd>tras 5 .r i spd>twr 4 .r i spd>twtr 5 .r i spd>trtp 5 .r +i spd>trc 4 .r i spd>trfc 5 .r +)dimm +hex + +ff dimm( i spd>cas and )dimm CONSTANT cl-supported +: max-cl -1 swap 8 0 DO dup 1 and IF nip i swap THEN u2/ LOOP drop ; +cl-supported max-cl VALUE cl + +: tck>60*ns dup f and swap 4 rshift a * over + 6 * swap CASE + a OF 2d - ENDOF b OF 2e - ENDOF c OF 20 - ENDOF d OF 21 - ENDOF + ENDCASE ; +: cl>tck 0 spd>cas max-cl swap - + CASE 0 OF 9 ENDOF 1 OF 17 ENDOF 2 OF 19 ENDOF + true ABORT" No supported CAS latency for this DIMM" ENDCASE + 0 swap spd@ tck>60*ns ; + +: spd>min-tck dup spd>cas max-cl cl - + CASE 0 OF 9 ENDOF 1 OF 17 ENDOF 2 OF 19 ENDOF + true ABORT" No supported CAS latency for this DIMM" ENDCASE + spd@ tck>60*ns ; +: spd>max-tck 2b spd@ tck>60*ns ; + +: .tck base @ >r decimal dup d# 60 / 0 .r [char] . emit + d# 60 mod d# 1000 * d# 60 / 3 0.r ." ns" r> base ! ; + +cr .( CAS latencies supported: ) +8 0 DO cl-supported 1 i lshift and IF i . THEN LOOP + +\ Find the lowest CL at the highest tCK. +8 0 DO cl-supported 1 i lshift and IF cl cl>tck i cl>tck = IF + i to cl LEAVE THEN THEN LOOP + +.( -- using ) cl . + + +0 dimm( i spd>min-tck max )dimm CONSTANT tck +dimm( i spd>max-tck tck < IF i dimm-invalid THEN )dimm +cr .( tCK is ) tck .tck + + +0 CONSTANT al +cl al + CONSTANT rl +rl 1- CONSTANT wl + +: // dup >r 1- + r> / ; \ round up +0 spd>tras d# 60 * tck // CONSTANT tras +0 spd>trtp d# 15 * tck // CONSTANT trtp +0 spd>twr d# 15 * tck // CONSTANT twr +0 spd>trp d# 15 * tck // CONSTANT trp +0 spd>trrd d# 15 * tck // CONSTANT trrd +0 spd>trrd d# 60 * tck // CONSTANT 4*trrd +0 spd>trcd d# 15 * tck // CONSTANT trcd +0 spd>trc d# 60 * tck // CONSTANT trc +0 spd>twtr d# 15 * tck // CONSTANT twtr + +: spd>memmd + >r r@ spd>rows r@ spd>cols + + r@ spd>banks 2log + 4 * r> spd>width 2log 3 * + 6c - ; +: dimm-group-size ( dimm# -- size ) + >r r@ spd>rows r@ spd>cols + 1 swap lshift + r@ spd>banks * r> spd>ranks * 10 * ; +VARIABLE start-address +VARIABLE was-prev-big +: assign-dimm-group ( dimm# -- config-value ) + dup dimm-valid? 0= IF drop 0 EXIT THEN + \ MemMd, enable, single-sided or not + dup spd>memmd c lshift 1 or over spd>ranks 1 = IF 2 or THEN +cr ." ---> " dup . +>r + dimm-group-size start-address @ 2dup + rot ( start end size ) + 80000000 > IF + dup 1000000000 < IF dup 4 rshift ELSE 08000000 THEN r> or >r \ Add2G + over 0<> IF over c rshift ELSE 00080000 THEN r> or >r \ Sub2G + was-prev-big on + ELSE + was-prev-big @ IF 80000000 + swap 80000000 + swap THEN r> 08080000 or >r + was-prev-big off + THEN + swap 18 rshift r> or >r \ start address + dup 80000000 = IF drop 100000000 THEN start-address ! r> ; + + +\ Now set the frequency in the memory controller +d# 1800 tck / 4 - 12 lshift 33c or f8000800 rl! +f8000860 rl@ 80000000 or f8000860 rl! 10000 0 DO LOOP + +: mc! f8002000 + rl! ; +: mc@ f8002000 + rl@ ; + + +\ memory timing regs (state machine) + +tras 2- +5 lshift al trtp + 2- or +5 lshift wl twr + or +5 lshift trp 2- or +5 lshift trp 2- 0 spd>banks 8 = IF 1+ THEN or +7 lshift 030 mc! + +al trtp + trp + 2- +5 lshift cl al + twr + trp + 1- or +5 lshift trrd 2- or +5 lshift trc 2- or +5 lshift trcd 2- or +5 lshift 4*trrd or +2 lshift 040 mc! + +0 +5 lshift 1 or +5 lshift 1 or +5 lshift cl 1- twtr + or +5 lshift 1 or +5 lshift 1 or +2 lshift 050 mc! + +0 +5 lshift 1 or +5 lshift 1 or +5 lshift 2 or +5 lshift 2 or +5 lshift 2 or +2 lshift 060 mc! \ XXX joerg has different setting + +cl 3 = IF 30801800 ( 30800d00 ) 070 mc! \ XXX memory refresh +ELSE 41002000 070 mc! THEN + +\ memory size regs + +1 dimm-group-size 0 dimm-group-size > 1 0 rot IF swap THEN \ biggest first +assign-dimm-group 200 mc! +assign-dimm-group 210 mc! +0 220 mc! 0 230 mc! + + + + + +\ arbiter tunables +\ 40041040 270 mc! +04041040 270 mc! +50000000 280 mc! +\ a0a00000 290 mc! \ a0000000 might be faster +00000000 290 mc! +\ 20020820 2a0 mc! +04020822 2a0 mc! +00000000 2b0 mc! +\ 30413cc7 2c0 mc! \ have to calculate the low five bits +30413dc5 2c0 mc! +\ cl 3 = IF 76000050 2d0 mc! 70000000 2e0 mc! ELSE +cl 3 = IF 75000050 2d0 mc! 70000000 2e0 mc! ELSE + b8002080 2d0 mc! b0000000 2e0 mc! THEN +\ Should test for something else really + + + +cl 3 = IF 00006000 890 mc! 00006000 8a0 mc! ELSE + 00006500 890 mc! 00006500 8a0 mc! THEN + +cl 3 = IF 1e008a8a ELSE 31000000 THEN +dup 800 mc! dup 810 mc! dup 820 mc! dup 830 mc! +dup 900 mc! dup 910 mc! dup 920 mc! dup 930 mc! dup 980 mc! +dup a00 mc! dup a10 mc! dup a20 mc! dup a30 mc! +dup b00 mc! dup b10 mc! dup b20 mc! dup b30 mc! b80 mc! + +\ 0 8d0 mc! 0 9d0 mc! 0 ad0 mc! 0 bd0 mc! +61630000 8d0 mc! +61630000 9d0 mc! +52510000 ad0 mc! +434e0000 bd0 mc! + +a0200400 100 mc! +80020000 110 mc! +80030000 120 mc! +80010404 130 mc! +cl 3 = IF +8000153a 140 mc! ELSE +8000174a 140 mc! THEN +a0200400 150 mc! +\ 92000000 160 mc! +\ 92000000 170 mc! +\ 91300000 160 mc! +\ 91300000 170 mc! +91800000 160 mc! +91800000 170 mc! +cl 3 = IF +8ff0143a 180 mc! ELSE +8ff0164a 180 mc! THEN +80010784 190 mc! +80010404 1a0 mc! +0 1b0 mc! 0 1c0 mc! 0 1d0 mc! 0 1e0 mc! 0 1f0 mc! + +cl 3 = IF +143a 0c0 mc! ELSE +164a 0c0 mc! THEN +0404 0d0 mc! + +\ after this point, setup is common for all speeds and sizes of dimms (sort of) + +60000000 3a0 mc! + +0 840 mc! 0 850 mc! 0 860 mc! 0 870 mc! +0 940 mc! 0 950 mc! 0 960 mc! 0 970 mc! 0 990 mc! +0 a40 mc! 0 a50 mc! 0 a60 mc! 0 a70 mc! +0 b40 mc! 0 b50 mc! 0 b60 mc! 0 b70 mc! 0 b90 mc! + +0 880 mc! + +001a4000 9a0 mc! + +84800000 500 mc! + +10000 0 DO LOOP + +80000000 b0 mc! BEGIN b0 mc@ 40000000 and UNTIL + +0 300 mc! 0 310 mc! + +80000000 440 mc! +0 410 mc! 27fffffc 420 mc! +fedcba98 430 mc! +c0000000 400 mc! BEGIN 400 mc@ c0000000 and 0= UNTIL + +cr .( mem done) diff --git a/qemu/roms/SLOF/board-js2x/slof/version.c b/qemu/roms/SLOF/board-js2x/slof/version.c new file mode 100644 index 000000000..e69de29bb diff --git a/qemu/roms/SLOF/board-js2x/slof/vga-display.fs b/qemu/roms/SLOF/board-js2x/slof/vga-display.fs new file mode 100644 index 000000000..96417e2d3 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/vga-display.fs @@ -0,0 +1,157 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ included by pci-class_03.fs + +( str len display_num ) \ name prefix + +false value is-installed? +value display_num ( str len ) + +s" ,Display-" $cat 41 display_num + char-cat \ add ", Display-A" or "-B" to name ( str len ) +encode-string s" name" property \ store as name property + +s" display" device-type + +\ screen-info is set by pci-class_03.fs contains output of get_vbe_info bios-snk call +CASE screen-info c@ \ ( display-type ) + 0 OF s" NONE" ENDOF \ No display + 1 OF s" Analog" ENDOF + 2 OF s" Digital" ENDOF +ENDCASE +encode-string s" display-type" property + +screen-info 8 + l@ value mem-adr +screen-info 1 + w@ value width +screen-info 3 + w@ value height + +screen-info c@ IF + \ if screen-info is not 0, we have some screen attached, add needed properties... + width encode-int s" width" property + height encode-int s" height" property + screen-info 5 + w@ encode-int s" linebytes" property + screen-info 7 + c@ encode-int s" depth" property + mem-adr encode-int s" address" property + \ the EDID property breaks the boot... so i leave it out for now, + \ maybe encode-bytes does s.th. wrong??? + \ screen-info c + 80 encode-bytes s" EDID" property + s" ISO8859-1" encode-string s" character-set" property \ i hope this is ok... +THEN + +\ words for installation/removal, needed by is-install/is-remove, see display.fs +: display-remove ( -- ) +; +: display-install ( -- ) + is-installed? NOT IF + mem-adr to frame-buffer-adr + default-font + set-font + width height width char-width / height char-height / ( width height #lines #cols ) + fb8-install + true to is-installed? + THEN +; + +: color! ( r g b number -- ) + \ 3c8 is RAMDAC write mode select palette entry register + \ 3c9 is RAMDAC write mode write palette entry register ( 3 consecutive writes set new entry ) + vga-device-node? 3c8 translate-address ( r g b number address ) + swap 1 pick ( r g b address number address ) + rb! \ write palette entry number ( r g b address ) + 1 + \ select next register (3c9) + dup 4 pick swap rb! \ write red ( r g b address ) + dup 3 pick swap rb! \ write green ( r g b address ) + dup 2 pick swap rb! \ write blue ( r g b address ) + 4drop +; + +: color@ ( number -- r g b ) + \ 3c7 is RAMDAC read mode select palette entry register + \ 3c9 is RAMDAC read mode read palette entry register ( 3 consecutive reads read entry ) + vga-device-node? 3c7 translate-address ( number address ) + swap 1 pick ( address number address ) + rb! \ write palette entry number ( address ) + 2 + >r \ select next register (3c9) ( R: address ) + r@ rb@ \ read red ( r R: address ) + r@ rb@ \ read green ( r g R: address ) + r@ rb@ \ write blue ( r g b R: address ) + r> drop ( r g b ) +; + +: set-colors ( adr number #numbers -- ) + \ 3c8 is RAMDAC write mode select palette entry register + \ 3c9 is RAMDAC write mode write palette entry register ( 3 consecutive writes set new entry ) + \ since after writing 3 entries, the palette entry is automagically incremented, + \ we can just continue writing... + vga-device-node? 3c8 translate-address ( adr number #numbers ) + dup 3 pick swap ( adr number #numbers address number address ) + rb! \ write palette entry number ( adr number #numbers address ) + 1 + \ select next register (3c9) + -rot swap drop ( adr address #numbers ) + -rot swap rot ( address adr #numbers ) + 0 ?DO + ( address adr ) + dup rb@ \ read red value from adr ( address adr r ) + 2 pick rb! \ write to register ( address adr ) + 1 + \ next adr + dup rb@ \ read green value from adr ( address adr g ) + 2 pick rb! \ write to register ( address adr ) + 1 + \ next adr + dup rb@ \ read blue value from adr ( address adr r ) + 2 pick rb! \ write to register ( address adr ) + 1 + \ next adr + LOOP + 2drop +; + +: get-colors ( adr number #numbers -- ) + \ 3c7 is RAMDAC read mode select palette entry register + \ 3c9 is RAMDAC read mode read palette entry register ( 3 consecutive reads get entry ) + \ since after reading 3 entries, the palette entry is automagically incremented, + \ we can just continue reading... + vga-device-node? 3c7 translate-address ( adr number #numbers ) + dup 3 pick swap ( adr number #numbers address number address ) + rb! \ write palette entry number ( adr number #numbers address ) + 2 + \ select next register (3c9) + -rot swap drop ( adr address #numbers ) + -rot swap rot ( address adr #numbers ) + 0 ?DO + ( address adr ) + 1 pick rb@ \ read red value from register ( address adr r ) + 1 pick rb! \ write to adr ( address adr ) + 1 + \ next adr + 1 pick rb@ \ read green value from register ( address adr g ) + 1 pick rb! \ write to adr ( address adr ) + 1 + \ next adr + 1 pick rb@ \ read blue value from register ( address adr b ) + 1 pick rb! \ write to adr ( address adr ) + 1 + \ next adr + LOOP + 2drop +; + +include graphics.fs + +\ clear screen +mem-adr width height * 0 rfill + +\ call is-install and is-remove +' display-install is-install + +' display-remove is-remove + +s" screen" find-alias 0= IF + \ no previous screen alias defined, define it... + s" screen" get-node node>path set-alias +ELSE + drop +THEN -- cgit 1.2.3-korg