From e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb Mon Sep 17 00:00:00 2001 From: Yang Zhang Date: Fri, 28 Aug 2015 09:58:54 +0800 Subject: Add qemu 2.4.0 Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang --- qemu/roms/SLOF/board-js2x/slof/ht.fs | 189 +++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 qemu/roms/SLOF/board-js2x/slof/ht.fs (limited to 'qemu/roms/SLOF/board-js2x/slof/ht.fs') diff --git a/qemu/roms/SLOF/board-js2x/slof/ht.fs b/qemu/roms/SLOF/board-js2x/slof/ht.fs new file mode 100644 index 000000000..8f818a825 --- /dev/null +++ b/qemu/roms/SLOF/board-js2x/slof/ht.fs @@ -0,0 +1,189 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + +\ Hypertransport. + +\ See the PCI OF binding document. + +new-device + +s" ht" 2dup device-name device-type +s" u3-ht" compatible +s" U3" encode-string s" model" property + +3 encode-int s" #address-cells" property +2 encode-int s" #size-cells" property + +s" /mpic" find-node encode-int s" interrupt-parent" property + +4000 encode-int 0 encode-int+ 0 encode-int+ +1 encode-int+ s" /mpic" find-node encode-int+ +10 encode-int+ 0 encode-int+ +s" interrupt-map" property + +f800 encode-int 0 encode-int+ 0 encode-int+ +7 encode-int+ s" interrupt-map-mask" property + +: decode-unit 2 hex-decode-unit 3 lshift or + 8 lshift 0 0 rot ; +: encode-unit nip nip ff00 and 8 rshift dup 7 and swap 3 rshift + over IF 2 ELSE nip 1 THEN hex-encode-unit ; + +f2000000 CONSTANT my-puid +\ Configuration space accesses. +: >config dup ffff > IF 1000000 + THEN f2000000 + ; + +\ : config-l! >config cr ." config-l! " 2dup . space . rl!-le ; +\ : config-l@ >config cr ." config-l@ " dup . rl@-le space dup . ; +\ : config-w! >config cr ." config-w! " 2dup . space . rw!-le ; +\ : config-w@ >config cr ." config-w@ " dup . rw@-le space dup . ; +\ : config-b! >config cr ." config-b! " 2dup . space . rb! ; +\ : config-b@ >config cr ." config-b@ " dup . rb@ space dup . ; + +: config-l! >config rl!-le ; +: config-l@ >config rl@-le ; +: config-w! >config rw!-le ; +: config-w@ >config rw@-le ; +: config-b! >config rb! ; +: config-b@ >config rb@ ; + +: config-dump ( addr size -- ) ['] config-l@ 4 (dump) ; + + +\ 16MB of configuration space, separate for type 0 and type 1. +00000000 encode-int f2000000 encode-int+ +00000000 encode-int+ 02000000 encode-int+ s" reg" property + +\ 4MB of I/O space. +01000000 encode-int 00000000 encode-int+ 00000000 encode-int+ +00000000 encode-int+ f4000000 encode-int+ +00000000 encode-int+ 00400000 encode-int+ + +\ 1 GB of memory space @ 80000000 +02000000 encode-int+ 00000000 encode-int+ 80000000 encode-int+ +00000000 encode-int+ 80000000 encode-int+ +00000000 encode-int+ 40000000 encode-int+ s" ranges" property + +\ Host bridge, so full bus range. +0 encode-int ff encode-int+ s" bus-range" property + +: enable-ht-apic-space 3c0300fe f8070200 rl! ; +enable-ht-apic-space + +\ spare out 0xc0000000-0xefffffff for pcie +f8070200 rl@ fffffff0 and f8070200 rl! +\ enable io memory for pcie @ c0000000-efffffff +70000003 f80903f0 rl!-le + + +\ Workaround for "takeover" boot on JS20: the top 8131 is programmed to be +\ device #1f, while it should be #01. +u3? IF f800 config-l@ 74501022 = IF 41 f8c2 config-w! THEN THEN + +\ Assign BUIDs. + +: find-ht-primary + 34 BEGIN config-b@ dup 0= ABORT" No HT capability block found!" + dup config-l@ e00000ff and 8 = IF 2 + EXIT THEN 1 + AGAIN ; + +: assign-buid ( this -- next ) + find-ht-primary dup >r config-w@ 5 rshift 1f and over r> config-b! + ; + +: assign-buids ( -- ) + 1 BEGIN 0 config-l@ ffffffff <> WHILE assign-buid REPEAT drop ; + +assign-buids + +: ldtstop f8000840 rl@ 40000 or f8000840 rl! ; +: delay 100000 0 DO LOOP ; +: wait-for-done BEGIN f8070110 rl@ 30 and UNTIL + BEGIN 8b4 config-l@ 30 and UNTIL ; +: ldtstop1 f8000840 rl@ dup 20000 or f8000840 rl! delay + f8000840 rl! wait-for-done ; +: warm 400000 f8070300 rl! 0 f8070300 rl! ; + +: dumpht cr f8070110 rl@ 8 0.r space 8b4 config-l@ 8 0.r + space f8070122 rb@ 2 0.r space 8bd config-b@ 2 0.r ; + +: clearht f8070110 dup rl@ swap rl! + f8070120 dup rl@ swap rl! + 08b4 dup config-l@ swap config-l! + 08bc dup config-l@ swap config-l! ; + +: setwidth dup f8070110 rb! 8b7 config-b! ; +: set8 00 setwidth ; +: set16 11 setwidth ; + +: setfreq dup f8070122 rb! 8bd config-b! ; +: set200 0 setfreq ; +: set300 1 setfreq ; +: set400 2 setfreq ; +: set500 3 setfreq ; +: set600 4 setfreq ; +: set800 5 setfreq ; +: set1000 6 setfreq ; +: set1200 7 setfreq ; +: set1400 8 setfreq ; +: set1600 9 setfreq ; + +: ht>freq 2 + dup 6 > IF 2* 6 - THEN d# 100 * ; +\ XXX: looks only at the U3/U4 side for max. link speed and width. +clearht f8070111 rb@ setwidth +f8070120 rw@ 2log dup .( Switching top HT bus to ) ht>freq 0 d# .r .( MHz...) cr +setfreq u3? IF ldtstop THEN u4? IF ldtstop1 THEN + +: open true ; +: close ; + +\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- ) +s" /mpic" find-node my-puid pci-irq-init drop +1f 0 c0000000 b8000000 b8000000 80000000 100000000 10000 +my-puid probe-pci-host-bridge + +: msi + f80040f0 010854 config-l! 0 010858 config-l! + ffff 01085c config-w! 81 010852 config-b! +; + +\ This works. Needs cleaning up though; and we need to communicate the +\ MSI address range to the client program. (We keep the default range +\ at fee00000 for now). +: msi-on 7 1 DO 10000 i 800 * a0 + config-l! LOOP ; +msi-on + +\ PCIe debug / fixup +: find-pcie-cap ( devfn -- offset | 0 ) + >r 34 BEGIN r@ + config-b@ dup ff <> over and WHILE + dup r@ + config-b@ 10 = IF + r> drop EXIT + THEN 1+ + REPEAT r> 2drop 0 +; + +: (set-ps) ( ps addr -- ) + 8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ; +: set-ps ( ps -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-ps) THEN drop LOOP drop ; + +: (set-rr) ( rr addr -- ) + 8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ; +: set-rr ( rr -- ) + log2 7 - + 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF + + 2dup (set-rr) THEN drop LOOP drop ; + +100 set-ps 200 set-rr +100 set-ps 200 set-rr + +finish-device -- cgit 1.2.3-korg