From bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 Mon Sep 17 00:00:00 2001 From: RajithaY Date: Tue, 25 Apr 2017 03:31:15 -0700 Subject: Adding qemu as a submodule of KVMFORNFV This Patch includes the changes to add qemu as a submodule to kvmfornfv repo and make use of the updated latest qemu for the execution of all testcase Change-Id: I1280af507a857675c7f81d30c95255635667bdd7 Signed-off-by:RajithaY --- qemu/qapi/block-core.json | 2558 --------------------------------------------- 1 file changed, 2558 deletions(-) delete mode 100644 qemu/qapi/block-core.json (limited to 'qemu/qapi/block-core.json') diff --git a/qemu/qapi/block-core.json b/qemu/qapi/block-core.json deleted file mode 100644 index 1d09079cc..000000000 --- a/qemu/qapi/block-core.json +++ /dev/null @@ -1,2558 +0,0 @@ -# -*- Mode: Python -*- -# -# QAPI block core definitions (vm unrelated) - -# QAPI common definitions -{ 'include': 'common.json' } - -## -# @SnapshotInfo -# -# @id: unique snapshot id -# -# @name: user chosen name -# -# @vm-state-size: size of the VM state -# -# @date-sec: UTC date of the snapshot in seconds -# -# @date-nsec: fractional part in nano seconds to be used with date-sec -# -# @vm-clock-sec: VM clock relative to boot in seconds -# -# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec -# -# Since: 1.3 -# -## - -{ 'struct': 'SnapshotInfo', - 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', - 'date-sec': 'int', 'date-nsec': 'int', - 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } - -## -# @ImageInfoSpecificQCow2: -# -# @compat: compatibility level -# -# @lazy-refcounts: #optional on or off; only valid for compat >= 1.1 -# -# @corrupt: #optional true if the image has been marked corrupt; only valid for -# compat >= 1.1 (since 2.2) -# -# @refcount-bits: width of a refcount entry in bits (since 2.3) -# -# Since: 1.7 -## -{ 'struct': 'ImageInfoSpecificQCow2', - 'data': { - 'compat': 'str', - '*lazy-refcounts': 'bool', - '*corrupt': 'bool', - 'refcount-bits': 'int' - } } - -## -# @ImageInfoSpecificVmdk: -# -# @create-type: The create type of VMDK image -# -# @cid: Content id of image -# -# @parent-cid: Parent VMDK image's cid -# -# @extents: List of extent files -# -# Since: 1.7 -## -{ 'struct': 'ImageInfoSpecificVmdk', - 'data': { - 'create-type': 'str', - 'cid': 'int', - 'parent-cid': 'int', - 'extents': ['ImageInfo'] - } } - -## -# @ImageInfoSpecific: -# -# A discriminated record of image format specific information structures. -# -# Since: 1.7 -## - -{ 'union': 'ImageInfoSpecific', - 'data': { - 'qcow2': 'ImageInfoSpecificQCow2', - 'vmdk': 'ImageInfoSpecificVmdk' - } } - -## -# @ImageInfo: -# -# Information about a QEMU image file -# -# @filename: name of the image file -# -# @format: format of the image file -# -# @virtual-size: maximum capacity in bytes of the image -# -# @actual-size: #optional actual size on disk in bytes of the image -# -# @dirty-flag: #optional true if image is not cleanly closed -# -# @cluster-size: #optional size of a cluster in bytes -# -# @encrypted: #optional true if the image is encrypted -# -# @compressed: #optional true if the image is compressed (Since 1.7) -# -# @backing-filename: #optional name of the backing file -# -# @full-backing-filename: #optional full path of the backing file -# -# @backing-filename-format: #optional the format of the backing file -# -# @snapshots: #optional list of VM snapshots -# -# @backing-image: #optional info of the backing image (since 1.6) -# -# @format-specific: #optional structure supplying additional format-specific -# information (since 1.7) -# -# Since: 1.3 -# -## - -{ 'struct': 'ImageInfo', - 'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool', - '*actual-size': 'int', 'virtual-size': 'int', - '*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool', - '*backing-filename': 'str', '*full-backing-filename': 'str', - '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'], - '*backing-image': 'ImageInfo', - '*format-specific': 'ImageInfoSpecific' } } - -## -# @ImageCheck: -# -# Information about a QEMU image file check -# -# @filename: name of the image file checked -# -# @format: format of the image file checked -# -# @check-errors: number of unexpected errors occurred during check -# -# @image-end-offset: #optional offset (in bytes) where the image ends, this -# field is present if the driver for the image format -# supports it -# -# @corruptions: #optional number of corruptions found during the check if any -# -# @leaks: #optional number of leaks found during the check if any -# -# @corruptions-fixed: #optional number of corruptions fixed during the check -# if any -# -# @leaks-fixed: #optional number of leaks fixed during the check if any -# -# @total-clusters: #optional total number of clusters, this field is present -# if the driver for the image format supports it -# -# @allocated-clusters: #optional total number of allocated clusters, this -# field is present if the driver for the image format -# supports it -# -# @fragmented-clusters: #optional total number of fragmented clusters, this -# field is present if the driver for the image format -# supports it -# -# @compressed-clusters: #optional total number of compressed clusters, this -# field is present if the driver for the image format -# supports it -# -# Since: 1.4 -# -## - -{ 'struct': 'ImageCheck', - 'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int', - '*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int', - '*corruptions-fixed': 'int', '*leaks-fixed': 'int', - '*total-clusters': 'int', '*allocated-clusters': 'int', - '*fragmented-clusters': 'int', '*compressed-clusters': 'int' } } - -## -# @MapEntry: -# -# Mapping information from a virtual block range to a host file range -# -# @start: the start byte of the mapped virtual range -# -# @length: the number of bytes of the mapped virtual range -# -# @data: whether the mapped range has data -# -# @zero: whether the virtual blocks are zeroed -# -# @depth: the depth of the mapping -# -# @offset: #optional the offset in file that the virtual sectors are mapped to -# -# @filename: #optional filename that is referred to by @offset -# -# Since: 2.6 -# -## -{ 'struct': 'MapEntry', - 'data': {'start': 'int', 'length': 'int', 'data': 'bool', - 'zero': 'bool', 'depth': 'int', '*offset': 'int', - '*filename': 'str' } } - -## -# @BlockdevCacheInfo -# -# Cache mode information for a block device -# -# @writeback: true if writeback mode is enabled -# @direct: true if the host page cache is bypassed (O_DIRECT) -# @no-flush: true if flush requests are ignored for the device -# -# Since: 2.3 -## -{ 'struct': 'BlockdevCacheInfo', - 'data': { 'writeback': 'bool', - 'direct': 'bool', - 'no-flush': 'bool' } } - -## -# @BlockDeviceInfo: -# -# Information about the backing device for a block device. -# -# @file: the filename of the backing device -# -# @node-name: #optional the name of the block driver node (Since 2.0) -# -# @ro: true if the backing device was open read-only -# -# @drv: the name of the block format used to open the backing device. As of -# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', -# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', -# 'http', 'https', 'luks', 'nbd', 'parallels', 'qcow', -# 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' -# 2.2: 'archipelago' added, 'cow' dropped -# 2.3: 'host_floppy' deprecated -# 2.5: 'host_floppy' dropped -# 2.6: 'luks' added -# -# @backing_file: #optional the name of the backing file (for copy-on-write) -# -# @backing_file_depth: number of files in the backing file chain (since: 1.2) -# -# @encrypted: true if the backing device is encrypted -# -# @encryption_key_missing: true if the backing device is encrypted but an -# valid encryption key is missing -# -# @detect_zeroes: detect and optimize zero writes (Since 2.1) -# -# @bps: total throughput limit in bytes per second is specified -# -# @bps_rd: read throughput limit in bytes per second is specified -# -# @bps_wr: write throughput limit in bytes per second is specified -# -# @iops: total I/O operations per second is specified -# -# @iops_rd: read I/O operations per second is specified -# -# @iops_wr: write I/O operations per second is specified -# -# @image: the info of image used (since: 1.6) -# -# @bps_max: #optional total throughput limit during bursts, -# in bytes (Since 1.7) -# -# @bps_rd_max: #optional read throughput limit during bursts, -# in bytes (Since 1.7) -# -# @bps_wr_max: #optional write throughput limit during bursts, -# in bytes (Since 1.7) -# -# @iops_max: #optional total I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @iops_rd_max: #optional read I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @iops_wr_max: #optional write I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @bps_max_length: #optional maximum length of the @bps_max burst -# period, in seconds. (Since 2.6) -# -# @bps_rd_max_length: #optional maximum length of the @bps_rd_max -# burst period, in seconds. (Since 2.6) -# -# @bps_wr_max_length: #optional maximum length of the @bps_wr_max -# burst period, in seconds. (Since 2.6) -# -# @iops_max_length: #optional maximum length of the @iops burst -# period, in seconds. (Since 2.6) -# -# @iops_rd_max_length: #optional maximum length of the @iops_rd_max -# burst period, in seconds. (Since 2.6) -# -# @iops_wr_max_length: #optional maximum length of the @iops_wr_max -# burst period, in seconds. (Since 2.6) -# -# @iops_size: #optional an I/O size in bytes (Since 1.7) -# -# @group: #optional throttle group name (Since 2.4) -# -# @cache: the cache mode used for the block device (since: 2.3) -# -# @write_threshold: configured write threshold for the device. -# 0 if disabled. (Since 2.3) -# -# Since: 0.14.0 -# -## -{ 'struct': 'BlockDeviceInfo', - 'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str', - '*backing_file': 'str', 'backing_file_depth': 'int', - 'encrypted': 'bool', 'encryption_key_missing': 'bool', - 'detect_zeroes': 'BlockdevDetectZeroesOptions', - 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', - 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', - 'image': 'ImageInfo', - '*bps_max': 'int', '*bps_rd_max': 'int', - '*bps_wr_max': 'int', '*iops_max': 'int', - '*iops_rd_max': 'int', '*iops_wr_max': 'int', - '*bps_max_length': 'int', '*bps_rd_max_length': 'int', - '*bps_wr_max_length': 'int', '*iops_max_length': 'int', - '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int', - '*iops_size': 'int', '*group': 'str', 'cache': 'BlockdevCacheInfo', - 'write_threshold': 'int' } } - -## -# @BlockDeviceIoStatus: -# -# An enumeration of block device I/O status. -# -# @ok: The last I/O operation has succeeded -# -# @failed: The last I/O operation has failed -# -# @nospace: The last I/O operation has failed due to a no-space condition -# -# Since: 1.0 -## -{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] } - -## -# @BlockDeviceMapEntry: -# -# Entry in the metadata map of the device (returned by "qemu-img map") -# -# @start: Offset in the image of the first byte described by this entry -# (in bytes) -# -# @length: Length of the range described by this entry (in bytes) -# -# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.) -# before reaching one for which the range is allocated. The value is -# in the range 0 to the depth of the image chain - 1. -# -# @zero: the sectors in this range read as zeros -# -# @data: reading the image will actually read data from a file (in particular, -# if @offset is present this means that the sectors are not simply -# preallocated, but contain actual data in raw format) -# -# @offset: if present, the image file stores the data for this range in -# raw format at the given offset. -# -# Since 1.7 -## -{ 'struct': 'BlockDeviceMapEntry', - 'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool', - 'data': 'bool', '*offset': 'int' } } - -## -# @DirtyBitmapStatus: -# -# An enumeration of possible states that a dirty bitmap can report to the user. -# -# @frozen: The bitmap is currently in-use by a backup operation or block job, -# and is immutable. -# -# @disabled: The bitmap is currently in-use by an internal operation and is -# read-only. It can still be deleted. -# -# @active: The bitmap is actively monitoring for new writes, and can be cleared, -# deleted, or used for backup operations. -# -# Since: 2.4 -## -{ 'enum': 'DirtyBitmapStatus', - 'data': ['active', 'disabled', 'frozen'] } - -## -# @BlockDirtyInfo: -# -# Block dirty bitmap information. -# -# @name: #optional the name of the dirty bitmap (Since 2.4) -# -# @count: number of dirty bytes according to the dirty bitmap -# -# @granularity: granularity of the dirty bitmap in bytes (since 1.4) -# -# @status: current status of the dirty bitmap (since 2.4) -# -# Since: 1.3 -## -{ 'struct': 'BlockDirtyInfo', - 'data': {'*name': 'str', 'count': 'int', 'granularity': 'uint32', - 'status': 'DirtyBitmapStatus'} } - -## -# @BlockInfo: -# -# Block device information. This structure describes a virtual device and -# the backing device associated with it. -# -# @device: The device name associated with the virtual device. -# -# @type: This field is returned only for compatibility reasons, it should -# not be used (always returns 'unknown') -# -# @removable: True if the device supports removable media. -# -# @locked: True if the guest has locked this device from having its media -# removed -# -# @tray_open: #optional True if the device's tray is open -# (only present if it has a tray) -# -# @dirty-bitmaps: #optional dirty bitmaps information (only present if the -# driver has one or more dirty bitmaps) (Since 2.0) -# -# @io-status: #optional @BlockDeviceIoStatus. Only present if the device -# supports it and the VM is configured to stop on errors -# (supported device models: virtio-blk, ide, scsi-disk) -# -# @inserted: #optional @BlockDeviceInfo describing the device if media is -# present -# -# Since: 0.14.0 -## -{ 'struct': 'BlockInfo', - 'data': {'device': 'str', 'type': 'str', 'removable': 'bool', - 'locked': 'bool', '*inserted': 'BlockDeviceInfo', - '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus', - '*dirty-bitmaps': ['BlockDirtyInfo'] } } - -## -# @query-block: -# -# Get a list of BlockInfo for all virtual block devices. -# -# Returns: a list of @BlockInfo describing each virtual block device -# -# Since: 0.14.0 -## -{ 'command': 'query-block', 'returns': ['BlockInfo'] } - - -## -# @BlockDeviceTimedStats: -# -# Statistics of a block device during a given interval of time. -# -# @interval_length: Interval used for calculating the statistics, -# in seconds. -# -# @min_rd_latency_ns: Minimum latency of read operations in the -# defined interval, in nanoseconds. -# -# @min_wr_latency_ns: Minimum latency of write operations in the -# defined interval, in nanoseconds. -# -# @min_flush_latency_ns: Minimum latency of flush operations in the -# defined interval, in nanoseconds. -# -# @max_rd_latency_ns: Maximum latency of read operations in the -# defined interval, in nanoseconds. -# -# @max_wr_latency_ns: Maximum latency of write operations in the -# defined interval, in nanoseconds. -# -# @max_flush_latency_ns: Maximum latency of flush operations in the -# defined interval, in nanoseconds. -# -# @avg_rd_latency_ns: Average latency of read operations in the -# defined interval, in nanoseconds. -# -# @avg_wr_latency_ns: Average latency of write operations in the -# defined interval, in nanoseconds. -# -# @avg_flush_latency_ns: Average latency of flush operations in the -# defined interval, in nanoseconds. -# -# @avg_rd_queue_depth: Average number of pending read operations -# in the defined interval. -# -# @avg_wr_queue_depth: Average number of pending write operations -# in the defined interval. -# -# Since: 2.5 -## - -{ 'struct': 'BlockDeviceTimedStats', - 'data': { 'interval_length': 'int', 'min_rd_latency_ns': 'int', - 'max_rd_latency_ns': 'int', 'avg_rd_latency_ns': 'int', - 'min_wr_latency_ns': 'int', 'max_wr_latency_ns': 'int', - 'avg_wr_latency_ns': 'int', 'min_flush_latency_ns': 'int', - 'max_flush_latency_ns': 'int', 'avg_flush_latency_ns': 'int', - 'avg_rd_queue_depth': 'number', 'avg_wr_queue_depth': 'number' } } - -## -# @BlockDeviceStats: -# -# Statistics of a virtual block device or a block backing device. -# -# @rd_bytes: The number of bytes read by the device. -# -# @wr_bytes: The number of bytes written by the device. -# -# @rd_operations: The number of read operations performed by the device. -# -# @wr_operations: The number of write operations performed by the device. -# -# @flush_operations: The number of cache flush operations performed by the -# device (since 0.15.0) -# -# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds -# (since 0.15.0). -# -# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0). -# -# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0). -# -# @wr_highest_offset: The offset after the greatest byte written to the -# device. The intended use of this information is for -# growable sparse files (like qcow2) that are used on top -# of a physical device. -# -# @rd_merged: Number of read requests that have been merged into another -# request (Since 2.3). -# -# @wr_merged: Number of write requests that have been merged into another -# request (Since 2.3). -# -# @idle_time_ns: #optional Time since the last I/O operation, in -# nanoseconds. If the field is absent it means that -# there haven't been any operations yet (Since 2.5). -# -# @failed_rd_operations: The number of failed read operations -# performed by the device (Since 2.5) -# -# @failed_wr_operations: The number of failed write operations -# performed by the device (Since 2.5) -# -# @failed_flush_operations: The number of failed flush operations -# performed by the device (Since 2.5) -# -# @invalid_rd_operations: The number of invalid read operations -# performed by the device (Since 2.5) -# -# @invalid_wr_operations: The number of invalid write operations -# performed by the device (Since 2.5) -# -# @invalid_flush_operations: The number of invalid flush operations -# performed by the device (Since 2.5) -# -# @account_invalid: Whether invalid operations are included in the -# last access statistics (Since 2.5) -# -# @account_failed: Whether failed operations are included in the -# latency and last access statistics (Since 2.5) -# -# @timed_stats: Statistics specific to the set of previously defined -# intervals of time (Since 2.5) -# -# Since: 0.14.0 -## -{ 'struct': 'BlockDeviceStats', - 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int', - 'wr_operations': 'int', 'flush_operations': 'int', - 'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int', - 'rd_total_time_ns': 'int', 'wr_highest_offset': 'int', - 'rd_merged': 'int', 'wr_merged': 'int', '*idle_time_ns': 'int', - 'failed_rd_operations': 'int', 'failed_wr_operations': 'int', - 'failed_flush_operations': 'int', 'invalid_rd_operations': 'int', - 'invalid_wr_operations': 'int', 'invalid_flush_operations': 'int', - 'account_invalid': 'bool', 'account_failed': 'bool', - 'timed_stats': ['BlockDeviceTimedStats'] } } - -## -# @BlockStats: -# -# Statistics of a virtual block device or a block backing device. -# -# @device: #optional If the stats are for a virtual block device, the name -# corresponding to the virtual block device. -# -# @node-name: #optional The node name of the device. (Since 2.3) -# -# @stats: A @BlockDeviceStats for the device. -# -# @parent: #optional This describes the file block device if it has one. -# -# @backing: #optional This describes the backing block device if it has one. -# (Since 2.0) -# -# Since: 0.14.0 -## -{ 'struct': 'BlockStats', - 'data': {'*device': 'str', '*node-name': 'str', - 'stats': 'BlockDeviceStats', - '*parent': 'BlockStats', - '*backing': 'BlockStats'} } - -## -# @query-blockstats: -# -# Query the @BlockStats for all virtual block devices. -# -# @query-nodes: #optional If true, the command will query all the block nodes -# that have a node name, in a list which will include "parent" -# information, but not "backing". -# If false or omitted, the behavior is as before - query all the -# device backends, recursively including their "parent" and -# "backing". (Since 2.3) -# -# Returns: A list of @BlockStats for each virtual block devices. -# -# Since: 0.14.0 -## -{ 'command': 'query-blockstats', - 'data': { '*query-nodes': 'bool' }, - 'returns': ['BlockStats'] } - -## -# @BlockdevOnError: -# -# An enumeration of possible behaviors for errors on I/O operations. -# The exact meaning depends on whether the I/O was initiated by a guest -# or by a block job -# -# @report: for guest operations, report the error to the guest; -# for jobs, cancel the job -# -# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR -# or BLOCK_JOB_ERROR) -# -# @enospc: same as @stop on ENOSPC, same as @report otherwise. -# -# @stop: for guest operations, stop the virtual machine; -# for jobs, pause the job -# -# Since: 1.3 -## -{ 'enum': 'BlockdevOnError', - 'data': ['report', 'ignore', 'enospc', 'stop'] } - -## -# @MirrorSyncMode: -# -# An enumeration of possible behaviors for the initial synchronization -# phase of storage mirroring. -# -# @top: copies data in the topmost image to the destination -# -# @full: copies data from all images to the destination -# -# @none: only copy data written from now on -# -# @incremental: only copy data described by the dirty bitmap. Since: 2.4 -# -# Since: 1.3 -## -{ 'enum': 'MirrorSyncMode', - 'data': ['top', 'full', 'none', 'incremental'] } - -## -# @BlockJobType: -# -# Type of a block job. -# -# @commit: block commit job type, see "block-commit" -# -# @stream: block stream job type, see "block-stream" -# -# @mirror: drive mirror job type, see "drive-mirror" -# -# @backup: drive backup job type, see "drive-backup" -# -# Since: 1.7 -## -{ 'enum': 'BlockJobType', - 'data': ['commit', 'stream', 'mirror', 'backup'] } - -## -# @BlockJobInfo: -# -# Information about a long-running block device operation. -# -# @type: the job type ('stream' for image streaming) -# -# @device: the block device name -# -# @len: the maximum progress value -# -# @busy: false if the job is known to be in a quiescent state, with -# no pending I/O. Since 1.3. -# -# @paused: whether the job is paused or, if @busy is true, will -# pause itself as soon as possible. Since 1.3. -# -# @offset: the current progress value -# -# @speed: the rate limit, bytes per second -# -# @io-status: the status of the job (since 1.3) -# -# @ready: true if the job may be completed (since 2.2) -# -# Since: 1.1 -## -{ 'struct': 'BlockJobInfo', - 'data': {'type': 'str', 'device': 'str', 'len': 'int', - 'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int', - 'io-status': 'BlockDeviceIoStatus', 'ready': 'bool'} } - -## -# @query-block-jobs: -# -# Return information about long-running block device operations. -# -# Returns: a list of @BlockJobInfo for each active block job -# -# Since: 1.1 -## -{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] } - -## -# @block_passwd: -# -# This command sets the password of a block device that has not been open -# with a password and requires one. -# -# The two cases where this can happen are a block device is created through -# QEMU's initial command line or a block device is changed through the legacy -# @change interface. -# -# In the event that the block device is created through the initial command -# line, the VM will start in the stopped state regardless of whether '-S' is -# used. The intention is for a management tool to query the block devices to -# determine which ones are encrypted, set the passwords with this command, and -# then start the guest with the @cont command. -# -# Either @device or @node-name must be set but not both. -# -# @device: #optional the name of the block backend device to set the password on -# -# @node-name: #optional graph node name to set the password on (Since 2.0) -# -# @password: the password to use for the device -# -# Returns: nothing on success -# If @device is not a valid block device, DeviceNotFound -# If @device is not encrypted, DeviceNotEncrypted -# -# Notes: Not all block formats support encryption and some that do are not -# able to validate that a password is correct. Disk corruption may -# occur if an invalid password is specified. -# -# Since: 0.14.0 -## -{ 'command': 'block_passwd', 'data': {'*device': 'str', - '*node-name': 'str', 'password': 'str'} } - -## -# @block_resize -# -# Resize a block image while a guest is running. -# -# Either @device or @node-name must be set but not both. -# -# @device: #optional the name of the device to get the image resized -# -# @node-name: #optional graph node name to get the image resized (Since 2.0) -# -# @size: new image size in bytes -# -# Returns: nothing on success -# If @device is not a valid block device, DeviceNotFound -# -# Since: 0.14.0 -## -{ 'command': 'block_resize', 'data': { '*device': 'str', - '*node-name': 'str', - 'size': 'int' }} - -## -# @NewImageMode -# -# An enumeration that tells QEMU how to set the backing file path in -# a new image file. -# -# @existing: QEMU should look for an existing image file. -# -# @absolute-paths: QEMU should create a new image with absolute paths -# for the backing file. If there is no backing file available, the new -# image will not be backed either. -# -# Since: 1.1 -## -{ 'enum': 'NewImageMode', - 'data': [ 'existing', 'absolute-paths' ] } - -## -# @BlockdevSnapshotSync -# -# Either @device or @node-name must be set but not both. -# -# @device: #optional the name of the device to generate the snapshot from. -# -# @node-name: #optional graph node name to generate the snapshot from (Since 2.0) -# -# @snapshot-file: the target of the new image. A new file will be created. -# -# @snapshot-node-name: #optional the graph node name of the new image (Since 2.0) -# -# @format: #optional the format of the snapshot image, default is 'qcow2'. -# -# @mode: #optional whether and how QEMU should create a new image, default is -# 'absolute-paths'. -## -{ 'struct': 'BlockdevSnapshotSync', - 'data': { '*device': 'str', '*node-name': 'str', - 'snapshot-file': 'str', '*snapshot-node-name': 'str', - '*format': 'str', '*mode': 'NewImageMode' } } - -## -# @BlockdevSnapshot -# -# @node: device or node name that will have a snapshot created. -# -# @overlay: reference to the existing block device that will become -# the overlay of @node, as part of creating the snapshot. -# It must not have a current backing file (this can be -# achieved by passing "backing": "" to blockdev-add). -# -# Since 2.5 -## -{ 'struct': 'BlockdevSnapshot', - 'data': { 'node': 'str', 'overlay': 'str' } } - -## -# @DriveBackup -# -# @device: the name of the device which should be copied. -# -# @target: the target of the new image. If the file exists, or if it -# is a device, the existing file/device will be used as the new -# destination. If it does not exist, a new file will be created. -# -# @format: #optional the format of the new destination, default is to -# probe if @mode is 'existing', else the format of the source -# -# @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, from a -# dirty bitmap, or only new I/O). -# -# @mode: #optional whether and how QEMU should create a new image, default is -# 'absolute-paths'. -# -# @speed: #optional the maximum speed, in bytes per second -# -# @bitmap: #optional the name of dirty bitmap if sync is "incremental". -# Must be present if sync is "incremental", must NOT be present -# otherwise. (Since 2.4) -# -# @on-source-error: #optional the action to take on an error on the source, -# default 'report'. 'stop' and 'enospc' can only be used -# if the block device supports io-status (see BlockInfo). -# -# @on-target-error: #optional the action to take on an error on the target, -# default 'report' (no limitations, since this applies to -# a different block device than @device). -# -# Note that @on-source-error and @on-target-error only affect background I/O. -# If an error occurs during a guest write request, the device's rerror/werror -# actions will be used. -# -# Since: 1.6 -## -{ 'struct': 'DriveBackup', - 'data': { 'device': 'str', 'target': 'str', '*format': 'str', - 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', - '*speed': 'int', '*bitmap': 'str', - '*on-source-error': 'BlockdevOnError', - '*on-target-error': 'BlockdevOnError' } } - -## -# @BlockdevBackup -# -# @device: the name of the device which should be copied. -# -# @target: the name of the backup target device. -# -# @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, or -# only new I/O). -# -# @speed: #optional the maximum speed, in bytes per second. The default is 0, -# for unlimited. -# -# @on-source-error: #optional the action to take on an error on the source, -# default 'report'. 'stop' and 'enospc' can only be used -# if the block device supports io-status (see BlockInfo). -# -# @on-target-error: #optional the action to take on an error on the target, -# default 'report' (no limitations, since this applies to -# a different block device than @device). -# -# Note that @on-source-error and @on-target-error only affect background I/O. -# If an error occurs during a guest write request, the device's rerror/werror -# actions will be used. -# -# Since: 2.3 -## -{ 'struct': 'BlockdevBackup', - 'data': { 'device': 'str', 'target': 'str', - 'sync': 'MirrorSyncMode', - '*speed': 'int', - '*on-source-error': 'BlockdevOnError', - '*on-target-error': 'BlockdevOnError' } } - -## -# @blockdev-snapshot-sync -# -# Generates a synchronous snapshot of a block device. -# -# For the arguments, see the documentation of BlockdevSnapshotSync. -# -# Returns: nothing on success -# If @device is not a valid block device, DeviceNotFound -# -# Since 0.14.0 -## -{ 'command': 'blockdev-snapshot-sync', - 'data': 'BlockdevSnapshotSync' } - - -## -# @blockdev-snapshot -# -# Generates a snapshot of a block device. -# -# For the arguments, see the documentation of BlockdevSnapshot. -# -# Since 2.5 -## -{ 'command': 'blockdev-snapshot', - 'data': 'BlockdevSnapshot' } - -## -# @change-backing-file -# -# Change the backing file in the image file metadata. This does not -# cause QEMU to reopen the image file to reparse the backing filename -# (it may, however, perform a reopen to change permissions from -# r/o -> r/w -> r/o, if needed). The new backing file string is written -# into the image file metadata, and the QEMU internal strings are -# updated. -# -# @image-node-name: The name of the block driver state node of the -# image to modify. -# -# @device: The name of the device that owns image-node-name. -# -# @backing-file: The string to write as the backing file. This -# string is not validated, so care should be taken -# when specifying the string or the image chain may -# not be able to be reopened again. -# -# Since: 2.1 -## -{ 'command': 'change-backing-file', - 'data': { 'device': 'str', 'image-node-name': 'str', - 'backing-file': 'str' } } - -## -# @block-commit -# -# Live commit of data from overlay image nodes into backing nodes - i.e., -# writes data between 'top' and 'base' into 'base'. -# -# @device: the name of the device -# -# @base: #optional The file name of the backing image to write data into. -# If not specified, this is the deepest backing image -# -# @top: #optional The file name of the backing image within the image chain, -# which contains the topmost data to be committed down. If -# not specified, this is the active layer. -# -# @backing-file: #optional The backing file string to write into the overlay -# image of 'top'. If 'top' is the active layer, -# specifying a backing file string is an error. This -# filename is not validated. -# -# If a pathname string is such that it cannot be -# resolved by QEMU, that means that subsequent QMP or -# HMP commands must use node-names for the image in -# question, as filename lookup methods will fail. -# -# If not specified, QEMU will automatically determine -# the backing file string to use, or error out if -# there is no obvious choice. Care should be taken -# when specifying the string, to specify a valid -# filename or protocol. -# (Since 2.1) -# -# If top == base, that is an error. -# If top == active, the job will not be completed by itself, -# user needs to complete the job with the block-job-complete -# command after getting the ready event. (Since 2.0) -# -# If the base image is smaller than top, then the base image -# will be resized to be the same size as top. If top is -# smaller than the base image, the base will not be -# truncated. If you want the base image size to match the -# size of the smaller top, you can safely truncate it -# yourself once the commit operation successfully completes. -# -# @speed: #optional the maximum speed, in bytes per second -# -# Returns: Nothing on success -# If commit or stream is already active on this device, DeviceInUse -# If @device does not exist, DeviceNotFound -# If image commit is not supported by this device, NotSupported -# If @base or @top is invalid, a generic error is returned -# If @speed is invalid, InvalidParameter -# -# Since: 1.3 -# -## -{ 'command': 'block-commit', - 'data': { 'device': 'str', '*base': 'str', '*top': 'str', - '*backing-file': 'str', '*speed': 'int' } } - -## -# @drive-backup -# -# Start a point-in-time copy of a block device to a new destination. The -# status of ongoing drive-backup operations can be checked with -# query-block-jobs where the BlockJobInfo.type field has the value 'backup'. -# The operation can be stopped before it has completed using the -# block-job-cancel command. -# -# For the arguments, see the documentation of DriveBackup. -# -# Returns: nothing on success -# If @device is not a valid block device, DeviceNotFound -# -# Since 1.6 -## -{ 'command': 'drive-backup', 'data': 'DriveBackup' } - -## -# @blockdev-backup -# -# Start a point-in-time copy of a block device to a new destination. The -# status of ongoing blockdev-backup operations can be checked with -# query-block-jobs where the BlockJobInfo.type field has the value 'backup'. -# The operation can be stopped before it has completed using the -# block-job-cancel command. -# -# For the arguments, see the documentation of BlockdevBackup. -# -# Since 2.3 -## -{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' } - - -## -# @query-named-block-nodes -# -# Get the named block driver list -# -# Returns: the list of BlockDeviceInfo -# -# Since 2.0 -## -{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] } - -## -# @drive-mirror -# -# Start mirroring a block device's writes to a new destination. -# -# @device: the name of the device whose writes should be mirrored. -# -# @target: the target of the new image. If the file exists, or if it -# is a device, the existing file/device will be used as the new -# destination. If it does not exist, a new file will be created. -# -# @format: #optional the format of the new destination, default is to -# probe if @mode is 'existing', else the format of the source -# -# @node-name: #optional the new block driver state node name in the graph -# (Since 2.1) -# -# @replaces: #optional with sync=full graph node name to be replaced by the new -# image when a whole image copy is done. This can be used to repair -# broken Quorum files. (Since 2.1) -# -# @mode: #optional whether and how QEMU should create a new image, default is -# 'absolute-paths'. -# -# @speed: #optional the maximum speed, in bytes per second -# -# @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, or -# only new I/O). -# -# @granularity: #optional granularity of the dirty bitmap, default is 64K -# if the image format doesn't have clusters, 4K if the clusters -# are smaller than that, else the cluster size. Must be a -# power of 2 between 512 and 64M (since 1.4). -# -# @buf-size: #optional maximum amount of data in flight from source to -# target (since 1.4). -# -# @on-source-error: #optional the action to take on an error on the source, -# default 'report'. 'stop' and 'enospc' can only be used -# if the block device supports io-status (see BlockInfo). -# -# @on-target-error: #optional the action to take on an error on the target, -# default 'report' (no limitations, since this applies to -# a different block device than @device). -# @unmap: #optional Whether to try to unmap target sectors where source has -# only zero. If true, and target unallocated sectors will read as zero, -# target image sectors will be unmapped; otherwise, zeroes will be -# written. Both will result in identical contents. -# Default is true. (Since 2.4) -# -# Returns: nothing on success -# If @device is not a valid block device, DeviceNotFound -# -# Since 1.3 -## -{ 'command': 'drive-mirror', - 'data': { 'device': 'str', 'target': 'str', '*format': 'str', - '*node-name': 'str', '*replaces': 'str', - 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', - '*speed': 'int', '*granularity': 'uint32', - '*buf-size': 'int', '*on-source-error': 'BlockdevOnError', - '*on-target-error': 'BlockdevOnError', - '*unmap': 'bool' } } - -## -# @BlockDirtyBitmap -# -# @node: name of device/node which the bitmap is tracking -# -# @name: name of the dirty bitmap -# -# Since 2.4 -## -{ 'struct': 'BlockDirtyBitmap', - 'data': { 'node': 'str', 'name': 'str' } } - -## -# @BlockDirtyBitmapAdd -# -# @node: name of device/node which the bitmap is tracking -# -# @name: name of the dirty bitmap -# -# @granularity: #optional the bitmap granularity, default is 64k for -# block-dirty-bitmap-add -# -# Since 2.4 -## -{ 'struct': 'BlockDirtyBitmapAdd', - 'data': { 'node': 'str', 'name': 'str', '*granularity': 'uint32' } } - -## -# @block-dirty-bitmap-add -# -# Create a dirty bitmap with a name on the node -# -# Returns: nothing on success -# If @node is not a valid block device or node, DeviceNotFound -# If @name is already taken, GenericError with an explanation -# -# Since 2.4 -## -{ 'command': 'block-dirty-bitmap-add', - 'data': 'BlockDirtyBitmapAdd' } - -## -# @block-dirty-bitmap-remove -# -# Remove a dirty bitmap on the node -# -# Returns: nothing on success -# If @node is not a valid block device or node, DeviceNotFound -# If @name is not found, GenericError with an explanation -# if @name is frozen by an operation, GenericError -# -# Since 2.4 -## -{ 'command': 'block-dirty-bitmap-remove', - 'data': 'BlockDirtyBitmap' } - -## -# @block-dirty-bitmap-clear -# -# Clear (reset) a dirty bitmap on the device -# -# Returns: nothing on success -# If @node is not a valid block device, DeviceNotFound -# If @name is not found, GenericError with an explanation -# -# Since 2.4 -## -{ 'command': 'block-dirty-bitmap-clear', - 'data': 'BlockDirtyBitmap' } - -## -# @blockdev-mirror -# -# Start mirroring a block device's writes to a new destination. -# -# @device: the name of the device whose writes should be mirrored. -# -# @target: the id or node-name of the block device to mirror to. This mustn't be -# attached to guest. -# -# @replaces: #optional with sync=full graph node name to be replaced by the new -# image when a whole image copy is done. This can be used to repair -# broken Quorum files. -# -# @speed: #optional the maximum speed, in bytes per second -# -# @sync: what parts of the disk image should be copied to the destination -# (all the disk, only the sectors allocated in the topmost image, or -# only new I/O). -# -# @granularity: #optional granularity of the dirty bitmap, default is 64K -# if the image format doesn't have clusters, 4K if the clusters -# are smaller than that, else the cluster size. Must be a -# power of 2 between 512 and 64M -# -# @buf-size: #optional maximum amount of data in flight from source to -# target -# -# @on-source-error: #optional the action to take on an error on the source, -# default 'report'. 'stop' and 'enospc' can only be used -# if the block device supports io-status (see BlockInfo). -# -# @on-target-error: #optional the action to take on an error on the target, -# default 'report' (no limitations, since this applies to -# a different block device than @device). -# -# Returns: nothing on success. -# -# Since 2.6 -## -{ 'command': 'blockdev-mirror', - 'data': { 'device': 'str', 'target': 'str', - '*replaces': 'str', - 'sync': 'MirrorSyncMode', - '*speed': 'int', '*granularity': 'uint32', - '*buf-size': 'int', '*on-source-error': 'BlockdevOnError', - '*on-target-error': 'BlockdevOnError' } } - -## -# @block_set_io_throttle: -# -# Change I/O throttle limits for a block drive. -# -# Since QEMU 2.4, each device with I/O limits is member of a throttle -# group. -# -# If two or more devices are members of the same group, the limits -# will apply to the combined I/O of the whole group in a round-robin -# fashion. Therefore, setting new I/O limits to a device will affect -# the whole group. -# -# The name of the group can be specified using the 'group' parameter. -# If the parameter is unset, it is assumed to be the current group of -# that device. If it's not in any group yet, the name of the device -# will be used as the name for its group. -# -# The 'group' parameter can also be used to move a device to a -# different group. In this case the limits specified in the parameters -# will be applied to the new group only. -# -# I/O limits can be disabled by setting all of them to 0. In this case -# the device will be removed from its group and the rest of its -# members will not be affected. The 'group' parameter is ignored. -# -# @device: The name of the device -# -# @bps: total throughput limit in bytes per second -# -# @bps_rd: read throughput limit in bytes per second -# -# @bps_wr: write throughput limit in bytes per second -# -# @iops: total I/O operations per second -# -# @iops_rd: read I/O operations per second -# -# @iops_wr: write I/O operations per second -# -# @bps_max: #optional total throughput limit during bursts, -# in bytes (Since 1.7) -# -# @bps_rd_max: #optional read throughput limit during bursts, -# in bytes (Since 1.7) -# -# @bps_wr_max: #optional write throughput limit during bursts, -# in bytes (Since 1.7) -# -# @iops_max: #optional total I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @iops_rd_max: #optional read I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @iops_wr_max: #optional write I/O operations per second during bursts, -# in bytes (Since 1.7) -# -# @bps_max_length: #optional maximum length of the @bps_max burst -# period, in seconds. It must only -# be set if @bps_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @bps_rd_max_length: #optional maximum length of the @bps_rd_max -# burst period, in seconds. It must only -# be set if @bps_rd_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @bps_wr_max_length: #optional maximum length of the @bps_wr_max -# burst period, in seconds. It must only -# be set if @bps_wr_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @iops_max_length: #optional maximum length of the @iops burst -# period, in seconds. It must only -# be set if @iops_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @iops_rd_max_length: #optional maximum length of the @iops_rd_max -# burst period, in seconds. It must only -# be set if @iops_rd_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @iops_wr_max_length: #optional maximum length of the @iops_wr_max -# burst period, in seconds. It must only -# be set if @iops_wr_max is set as well. -# Defaults to 1. (Since 2.6) -# -# @iops_size: #optional an I/O size in bytes (Since 1.7) -# -# @group: #optional throttle group name (Since 2.4) -# -# Returns: Nothing on success -# If @device is not a valid block device, DeviceNotFound -# -# Since: 1.1 -## -{ 'command': 'block_set_io_throttle', - 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', - 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', - '*bps_max': 'int', '*bps_rd_max': 'int', - '*bps_wr_max': 'int', '*iops_max': 'int', - '*iops_rd_max': 'int', '*iops_wr_max': 'int', - '*bps_max_length': 'int', '*bps_rd_max_length': 'int', - '*bps_wr_max_length': 'int', '*iops_max_length': 'int', - '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int', - '*iops_size': 'int', '*group': 'str' } } - -## -# @block-stream: -# -# Copy data from a backing file into a block device. -# -# The block streaming operation is performed in the background until the entire -# backing file has been copied. This command returns immediately once streaming -# has started. The status of ongoing block streaming operations can be checked -# with query-block-jobs. The operation can be stopped before it has completed -# using the block-job-cancel command. -# -# If a base file is specified then sectors are not copied from that base file and -# its backing chain. When streaming completes the image file will have the base -# file as its backing file. This can be used to stream a subset of the backing -# file chain instead of flattening the entire image. -# -# On successful completion the image file is updated to drop the backing file -# and the BLOCK_JOB_COMPLETED event is emitted. -# -# @device: the device name -# -# @base: #optional the common backing file name -# -# @backing-file: #optional The backing file string to write into the active -# layer. This filename is not validated. -# -# If a pathname string is such that it cannot be -# resolved by QEMU, that means that subsequent QMP or -# HMP commands must use node-names for the image in -# question, as filename lookup methods will fail. -# -# If not specified, QEMU will automatically determine -# the backing file string to use, or error out if there -# is no obvious choice. Care should be taken when -# specifying the string, to specify a valid filename or -# protocol. -# (Since 2.1) -# -# @speed: #optional the maximum speed, in bytes per second -# -# @on-error: #optional the action to take on an error (default report). -# 'stop' and 'enospc' can only be used if the block device -# supports io-status (see BlockInfo). Since 1.3. -# -# Returns: Nothing on success -# If @device does not exist, DeviceNotFound -# -# Since: 1.1 -## -{ 'command': 'block-stream', - 'data': { 'device': 'str', '*base': 'str', '*backing-file': 'str', - '*speed': 'int', '*on-error': 'BlockdevOnError' } } - -## -# @block-job-set-speed: -# -# Set maximum speed for a background block operation. -# -# This command can only be issued when there is an active block job. -# -# Throttling can be disabled by setting the speed to 0. -# -# @device: the device name -# -# @speed: the maximum speed, in bytes per second, or 0 for unlimited. -# Defaults to 0. -# -# Returns: Nothing on success -# If no background operation is active on this device, DeviceNotActive -# -# Since: 1.1 -## -{ 'command': 'block-job-set-speed', - 'data': { 'device': 'str', 'speed': 'int' } } - -## -# @block-job-cancel: -# -# Stop an active background block operation. -# -# This command returns immediately after marking the active background block -# operation for cancellation. It is an error to call this command if no -# operation is in progress. -# -# The operation will cancel as soon as possible and then emit the -# BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when -# enumerated using query-block-jobs. -# -# For streaming, the image file retains its backing file unless the streaming -# operation happens to complete just as it is being cancelled. A new streaming -# operation can be started at a later time to finish copying all data from the -# backing file. -# -# @device: the device name -# -# @force: #optional whether to allow cancellation of a paused job (default -# false). Since 1.3. -# -# Returns: Nothing on success -# If no background operation is active on this device, DeviceNotActive -# -# Since: 1.1 -## -{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } } - -## -# @block-job-pause: -# -# Pause an active background block operation. -# -# This command returns immediately after marking the active background block -# operation for pausing. It is an error to call this command if no -# operation is in progress. Pausing an already paused job has no cumulative -# effect; a single block-job-resume command will resume the job. -# -# The operation will pause as soon as possible. No event is emitted when -# the operation is actually paused. Cancelling a paused job automatically -# resumes it. -# -# @device: the device name -# -# Returns: Nothing on success -# If no background operation is active on this device, DeviceNotActive -# -# Since: 1.3 -## -{ 'command': 'block-job-pause', 'data': { 'device': 'str' } } - -## -# @block-job-resume: -# -# Resume an active background block operation. -# -# This command returns immediately after resuming a paused background block -# operation. It is an error to call this command if no operation is in -# progress. Resuming an already running job is not an error. -# -# This command also clears the error status of the job. -# -# @device: the device name -# -# Returns: Nothing on success -# If no background operation is active on this device, DeviceNotActive -# -# Since: 1.3 -## -{ 'command': 'block-job-resume', 'data': { 'device': 'str' } } - -## -# @block-job-complete: -# -# Manually trigger completion of an active background block operation. This -# is supported for drive mirroring, where it also switches the device to -# write to the target path only. The ability to complete is signaled with -# a BLOCK_JOB_READY event. -# -# This command completes an active background block operation synchronously. -# The ordering of this command's return with the BLOCK_JOB_COMPLETED event -# is not defined. Note that if an I/O error occurs during the processing of -# this command: 1) the command itself will fail; 2) the error will be processed -# according to the rerror/werror arguments that were specified when starting -# the operation. -# -# A cancelled or paused job cannot be completed. -# -# @device: the device name -# -# Returns: Nothing on success -# If no background operation is active on this device, DeviceNotActive -# -# Since: 1.3 -## -{ 'command': 'block-job-complete', 'data': { 'device': 'str' } } - -## -# @BlockdevDiscardOptions -# -# Determines how to handle discard requests. -# -# @ignore: Ignore the request -# @unmap: Forward as an unmap request -# -# Since: 1.7 -## -{ 'enum': 'BlockdevDiscardOptions', - 'data': [ 'ignore', 'unmap' ] } - -## -# @BlockdevDetectZeroesOptions -# -# Describes the operation mode for the automatic conversion of plain -# zero writes by the OS to driver specific optimized zero write commands. -# -# @off: Disabled (default) -# @on: Enabled -# @unmap: Enabled and even try to unmap blocks if possible. This requires -# also that @BlockdevDiscardOptions is set to unmap for this device. -# -# Since: 2.1 -## -{ 'enum': 'BlockdevDetectZeroesOptions', - 'data': [ 'off', 'on', 'unmap' ] } - -## -# @BlockdevAioOptions -# -# Selects the AIO backend to handle I/O requests -# -# @threads: Use qemu's thread pool -# @native: Use native AIO backend (only Linux and Windows) -# -# Since: 1.7 -## -{ 'enum': 'BlockdevAioOptions', - 'data': [ 'threads', 'native' ] } - -## -# @BlockdevCacheOptions -# -# Includes cache-related options for block devices -# -# @direct: #optional enables use of O_DIRECT (bypass the host page cache; -# default: false) -# @no-flush: #optional ignore any flush requests for the device (default: -# false) -# -# Since: 1.7 -## -{ 'struct': 'BlockdevCacheOptions', - 'data': { '*direct': 'bool', - '*no-flush': 'bool' } } - -## -# @BlockdevDriver -# -# Drivers that are supported in block device operations. -# -# @host_device, @host_cdrom: Since 2.1 -# -# Since: 2.0 -## -{ 'enum': 'BlockdevDriver', - 'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop', - 'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', - 'http', 'https', 'luks', 'null-aio', 'null-co', 'parallels', - 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx', - 'vmdk', 'vpc', 'vvfat' ] } - -## -# @BlockdevOptionsFile -# -# Driver specific block device options for the file backend and similar -# protocols. -# -# @filename: path to the image file -# -# Since: 1.7 -## -{ 'struct': 'BlockdevOptionsFile', - 'data': { 'filename': 'str' } } - -## -# @BlockdevOptionsNull -# -# Driver specific block device options for the null backend. -# -# @size: #optional size of the device in bytes. -# @latency-ns: #optional emulated latency (in nanoseconds) in processing -# requests. Default to zero which completes requests immediately. -# (Since 2.4) -# -# Since: 2.2 -## -{ 'struct': 'BlockdevOptionsNull', - 'data': { '*size': 'int', '*latency-ns': 'uint64' } } - -## -# @BlockdevOptionsVVFAT -# -# Driver specific block device options for the vvfat protocol. -# -# @dir: directory to be exported as FAT image -# @fat-type: #optional FAT type: 12, 16 or 32 -# @floppy: #optional whether to export a floppy image (true) or -# partitioned hard disk (false; default) -# @label: #optional set the volume label, limited to 11 bytes. FAT16 and -# FAT32 traditionally have some restrictions on labels, which are -# ignored by most operating systems. Defaults to "QEMU VVFAT". -# (since 2.4) -# @rw: #optional whether to allow write operations (default: false) -# -# Since: 1.7 -## -{ 'struct': 'BlockdevOptionsVVFAT', - 'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool', - '*label': 'str', '*rw': 'bool' } } - -## -# @BlockdevOptionsGenericFormat -# -# Driver specific block device options for image format that have no option -# besides their data source. -# -# @file: reference to or definition of the data source block device -# -# Since: 1.7 -## -{ 'struct': 'BlockdevOptionsGenericFormat', - 'data': { 'file': 'BlockdevRef' } } - -## -# @BlockdevOptionsLUKS -# -# Driver specific block device options for LUKS. -# -# @key-secret: #optional the ID of a QCryptoSecret object providing -# the decryption key (since 2.6). Mandatory except when -# doing a metadata-only probe of the image. -# -# Since: 2.6 -## -{ 'struct': 'BlockdevOptionsLUKS', - 'base': 'BlockdevOptionsGenericFormat', - 'data': { '*key-secret': 'str' } } - - -## -# @BlockdevOptionsGenericCOWFormat -# -# Driver specific block device options for image format that have no option -# besides their data source and an optional backing file. -# -# @backing: #optional reference to or definition of the backing file block -# device (if missing, taken from the image file content). It is -# allowed to pass an empty string here in order to disable the -# default backing file. -# -# Since: 1.7 -## -{ 'struct': 'BlockdevOptionsGenericCOWFormat', - 'base': 'BlockdevOptionsGenericFormat', - 'data': { '*backing': 'BlockdevRef' } } - -## -# @Qcow2OverlapCheckMode -# -# General overlap check modes. -# -# @none: Do not perform any checks -# -# @constant: Perform only checks which can be done in constant time and -# without reading anything from disk -# -# @cached: Perform only checks which can be done without reading anything -# from disk -# -# @all: Perform all available overlap checks -# -# Since: 2.2 -## -{ 'enum': 'Qcow2OverlapCheckMode', - 'data': [ 'none', 'constant', 'cached', 'all' ] } - -## -# @Qcow2OverlapCheckFlags -# -# Structure of flags for each metadata structure. Setting a field to 'true' -# makes qemu guard that structure against unintended overwriting. The default -# value is chosen according to the template given. -# -# @template: Specifies a template mode which can be adjusted using the other -# flags, defaults to 'cached' -# -# Since: 2.2 -## -{ 'struct': 'Qcow2OverlapCheckFlags', - 'data': { '*template': 'Qcow2OverlapCheckMode', - '*main-header': 'bool', - '*active-l1': 'bool', - '*active-l2': 'bool', - '*refcount-table': 'bool', - '*refcount-block': 'bool', - '*snapshot-table': 'bool', - '*inactive-l1': 'bool', - '*inactive-l2': 'bool' } } - -## -# @Qcow2OverlapChecks -# -# Specifies which metadata structures should be guarded against unintended -# overwriting. -# -# @flags: set of flags for separate specification of each metadata structure -# type -# -# @mode: named mode which chooses a specific set of flags -# -# Since: 2.2 -## -{ 'alternate': 'Qcow2OverlapChecks', - 'data': { 'flags': 'Qcow2OverlapCheckFlags', - 'mode': 'Qcow2OverlapCheckMode' } } - -## -# @BlockdevOptionsQcow2 -# -# Driver specific block device options for qcow2. -# -# @lazy-refcounts: #optional whether to enable the lazy refcounts -# feature (default is taken from the image file) -# -# @pass-discard-request: #optional whether discard requests to the qcow2 -# device should be forwarded to the data source -# -# @pass-discard-snapshot: #optional whether discard requests for the data source -# should be issued when a snapshot operation (e.g. -# deleting a snapshot) frees clusters in the qcow2 file -# -# @pass-discard-other: #optional whether discard requests for the data source -# should be issued on other occasions where a cluster -# gets freed -# -# @overlap-check: #optional which overlap checks to perform for writes -# to the image, defaults to 'cached' (since 2.2) -# -# @cache-size: #optional the maximum total size of the L2 table and -# refcount block caches in bytes (since 2.2) -# -# @l2-cache-size: #optional the maximum size of the L2 table cache in -# bytes (since 2.2) -# -# @refcount-cache-size: #optional the maximum size of the refcount block cache -# in bytes (since 2.2) -# -# @cache-clean-interval: #optional clean unused entries in the L2 and refcount -# caches. The interval is in seconds. The default value -# is 0 and it disables this feature (since 2.5) -# -# Since: 1.7 -## -{ 'struct': 'BlockdevOptionsQcow2', - 'base': 'BlockdevOptionsGenericCOWFormat', - 'data': { '*lazy-refcounts': 'bool', - '*pass-discard-request': 'bool', - '*pass-discard-snapshot': 'bool', - '*pass-discard-other': 'bool', - '*overlap-check': 'Qcow2OverlapChecks', - '*cache-size': 'int', - '*l2-cache-size': 'int', - '*refcount-cache-size': 'int', - '*cache-clean-interval': 'int' } } - - -## -# @BlockdevOptionsArchipelago -# -# Driver specific block device options for Archipelago. -# -# @volume: Name of the Archipelago volume image -# -# @mport: #optional The port number on which mapperd is -# listening. This is optional -# and if not specified, QEMU will make Archipelago -# use the default port (1001). -# -# @vport: #optional The port number on which vlmcd is -# listening. This is optional -# and if not specified, QEMU will make Archipelago -# use the default port (501). -# -# @segment: #optional The name of the shared memory segment -# Archipelago stack is using. This is optional -# and if not specified, QEMU will make Archipelago -# use the default value, 'archipelago'. -# Since: 2.2 -## -{ 'struct': 'BlockdevOptionsArchipelago', - 'data': { 'volume': 'str', - '*mport': 'int', - '*vport': 'int', - '*segment': 'str' } } - - -## -# @BlkdebugEvent -# -# Trigger events supported by blkdebug. -# -# Since: 2.0 -## -{ 'enum': 'BlkdebugEvent', 'prefix': 'BLKDBG', - 'data': [ 'l1_update', 'l1_grow_alloc_table', 'l1_grow_write_table', - 'l1_grow_activate_table', 'l2_load', 'l2_update', - 'l2_update_compressed', 'l2_alloc_cow_read', 'l2_alloc_write', - 'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio', - 'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read', - 'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update', - 'refblock_load', 'refblock_update', 'refblock_update_part', - 'refblock_alloc', 'refblock_alloc_hookup', 'refblock_alloc_write', - 'refblock_alloc_write_blocks', 'refblock_alloc_write_table', - 'refblock_alloc_switch_table', 'cluster_alloc', - 'cluster_alloc_bytes', 'cluster_free', 'flush_to_os', - 'flush_to_disk', 'pwritev_rmw_head', 'pwritev_rmw_after_head', - 'pwritev_rmw_tail', 'pwritev_rmw_after_tail', 'pwritev', - 'pwritev_zero', 'pwritev_done', 'empty_image_prepare' ] } - -## -# @BlkdebugInjectErrorOptions -# -# Describes a single error injection for blkdebug. -# -# @event: trigger event -# -# @state: #optional the state identifier blkdebug needs to be in to -# actually trigger the event; defaults to "any" -# -# @errno: #optional error identifier (errno) to be returned; defaults to -# EIO -# -# @sector: #optional specifies the sector index which has to be affected -# in order to actually trigger the event; defaults to "any -# sector" -# -# @once: #optional disables further events after this one has been -# triggered; defaults to false -# -# @immediately: #optional fail immediately; defaults to false -# -# Since: 2.0 -## -{ 'struct': 'BlkdebugInjectErrorOptions', - 'data': { 'event': 'BlkdebugEvent', - '*state': 'int', - '*errno': 'int', - '*sector': 'int', - '*once': 'bool', - '*immediately': 'bool' } } - -## -# @BlkdebugSetStateOptions -# -# Describes a single state-change event for blkdebug. -# -# @event: trigger event -# -# @state: #optional the current state identifier blkdebug needs to be in; -# defaults to "any" -# -# @new_state: the state identifier blkdebug is supposed to assume if -# this event is triggered -# -# Since: 2.0 -## -{ 'struct': 'BlkdebugSetStateOptions', - 'data': { 'event': 'BlkdebugEvent', - '*state': 'int', - 'new_state': 'int' } } - -## -# @BlockdevOptionsBlkdebug -# -# Driver specific block device options for blkdebug. -# -# @image: underlying raw block device (or image file) -# -# @config: #optional filename of the configuration file -# -# @align: #optional required alignment for requests in bytes -# -# @inject-error: #optional array of error injection descriptions -# -# @set-state: #optional array of state-change descriptions -# -# Since: 2.0 -## -{ 'struct': 'BlockdevOptionsBlkdebug', - 'data': { 'image': 'BlockdevRef', - '*config': 'str', - '*align': 'int', - '*inject-error': ['BlkdebugInjectErrorOptions'], - '*set-state': ['BlkdebugSetStateOptions'] } } - -## -# @BlockdevOptionsBlkverify -# -# Driver specific block device options for blkverify. -# -# @test: block device to be tested -# -# @raw: raw image used for verification -# -# Since: 2.0 -## -{ 'struct': 'BlockdevOptionsBlkverify', - 'data': { 'test': 'BlockdevRef', - 'raw': 'BlockdevRef' } } - -## -# @QuorumReadPattern -# -# An enumeration of quorum read patterns. -# -# @quorum: read all the children and do a quorum vote on reads -# -# @fifo: read only from the first child that has not failed -# -# Since: 2.2 -## -{ 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] } - -## -# @BlockdevOptionsQuorum -# -# Driver specific block device options for Quorum -# -# @blkverify: #optional true if the driver must print content mismatch -# set to false by default -# -# @children: the children block devices to use -# -# @vote-threshold: the vote limit under which a read will fail -# -# @rewrite-corrupted: #optional rewrite corrupted data when quorum is reached -# (Since 2.1) -# -# @read-pattern: #optional choose read pattern and set to quorum by default -# (Since 2.2) -# -# Since: 2.0 -## -{ 'struct': 'BlockdevOptionsQuorum', - 'data': { '*blkverify': 'bool', - 'children': [ 'BlockdevRef' ], - 'vote-threshold': 'int', - '*rewrite-corrupted': 'bool', - '*read-pattern': 'QuorumReadPattern' } } - -## -# @BlockdevOptions -# -# Options for creating a block device. Many options are available for all -# block devices, independent of the block driver: -# -# @driver: block driver name -# @id: #optional id by which the new block device can be referred to. -# This option is only allowed on the top level of blockdev-add. -# A BlockBackend will be created by blockdev-add if and only if -# this option is given. -# @node-name: #optional the name of a block driver state node (Since 2.0). -# This option is required on the top level of blockdev-add if -# the @id option is not given there. -# @discard: #optional discard-related options (default: ignore) -# @cache: #optional cache-related options -# @aio: #optional AIO backend (default: threads) -# @rerror: #optional how to handle read errors on the device -# (default: report) -# @werror: #optional how to handle write errors on the device -# (default: enospc) -# @read-only: #optional whether the block device should be read-only -# (default: false) -# @stats-account-invalid: #optional whether to include invalid -# operations when computing last access statistics -# (default: true) (Since 2.5) -# @stats-account-failed: #optional whether to include failed -# operations when computing latency and last -# access statistics (default: true) (Since 2.5) -# @stats-intervals: #optional list of intervals for collecting I/O -# statistics, in seconds (default: none) (Since 2.5) -# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1) -# (default: off) -# -# Remaining options are determined by the block driver. -# -# Since: 1.7 -## -{ 'union': 'BlockdevOptions', - 'base': { 'driver': 'BlockdevDriver', - '*id': 'str', - '*node-name': 'str', - '*discard': 'BlockdevDiscardOptions', - '*cache': 'BlockdevCacheOptions', - '*aio': 'BlockdevAioOptions', - '*rerror': 'BlockdevOnError', - '*werror': 'BlockdevOnError', - '*read-only': 'bool', - '*stats-account-invalid': 'bool', - '*stats-account-failed': 'bool', - '*stats-intervals': ['int'], - '*detect-zeroes': 'BlockdevDetectZeroesOptions' }, - 'discriminator': 'driver', - 'data': { - 'archipelago':'BlockdevOptionsArchipelago', - 'blkdebug': 'BlockdevOptionsBlkdebug', - 'blkverify': 'BlockdevOptionsBlkverify', - 'bochs': 'BlockdevOptionsGenericFormat', - 'cloop': 'BlockdevOptionsGenericFormat', - 'dmg': 'BlockdevOptionsGenericFormat', - 'file': 'BlockdevOptionsFile', - 'ftp': 'BlockdevOptionsFile', - 'ftps': 'BlockdevOptionsFile', -# TODO gluster: Wait for structured options - 'host_cdrom': 'BlockdevOptionsFile', - 'host_device':'BlockdevOptionsFile', - 'http': 'BlockdevOptionsFile', - 'https': 'BlockdevOptionsFile', -# TODO iscsi: Wait for structured options - 'luks': 'BlockdevOptionsLUKS', -# TODO nbd: Should take InetSocketAddress for 'host'? -# TODO nfs: Wait for structured options - 'null-aio': 'BlockdevOptionsNull', - 'null-co': 'BlockdevOptionsNull', - 'parallels': 'BlockdevOptionsGenericFormat', - 'qcow2': 'BlockdevOptionsQcow2', - 'qcow': 'BlockdevOptionsGenericCOWFormat', - 'qed': 'BlockdevOptionsGenericCOWFormat', - 'quorum': 'BlockdevOptionsQuorum', - 'raw': 'BlockdevOptionsGenericFormat', -# TODO rbd: Wait for structured options -# TODO sheepdog: Wait for structured options -# TODO ssh: Should take InetSocketAddress for 'host'? - 'tftp': 'BlockdevOptionsFile', - 'vdi': 'BlockdevOptionsGenericFormat', - 'vhdx': 'BlockdevOptionsGenericFormat', - 'vmdk': 'BlockdevOptionsGenericCOWFormat', - 'vpc': 'BlockdevOptionsGenericFormat', - 'vvfat': 'BlockdevOptionsVVFAT' - } } - -## -# @BlockdevRef -# -# Reference to a block device. -# -# @definition: defines a new block device inline -# @reference: references the ID of an existing block device. An -# empty string means that no block device should be -# referenced. -# -# Since: 1.7 -## -{ 'alternate': 'BlockdevRef', - 'data': { 'definition': 'BlockdevOptions', - 'reference': 'str' } } - -## -# @blockdev-add: -# -# Creates a new block device. If the @id option is given at the top level, a -# BlockBackend will be created; otherwise, @node-name is mandatory at the top -# level and no BlockBackend will be created. -# -# This command is still a work in progress. It doesn't support all -# block drivers among other things. Stay away from it unless you want -# to help with its development. -# -# @options: block device options for the new device -# -# Since: 1.7 -## -{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } } - -## -# @x-blockdev-del: -# -# Deletes a block device that has been added using blockdev-add. -# The selected device can be either a block backend or a graph node. -# -# In the former case the backend will be destroyed, along with its -# inserted medium if there's any. The command will fail if the backend -# or its medium are in use. -# -# In the latter case the node will be destroyed. The command will fail -# if the node is attached to a block backend or is otherwise being -# used. -# -# One of @id or @node-name must be specified, but not both. -# -# This command is still a work in progress and is considered -# experimental. Stay away from it unless you want to help with its -# development. -# -# @id: #optional Name of the block backend device to delete. -# -# @node-name: #optional Name of the graph node to delete. -# -# Since: 2.5 -## -{ 'command': 'x-blockdev-del', 'data': { '*id': 'str', '*node-name': 'str' } } - -## -# @blockdev-open-tray: -# -# Opens a block device's tray. If there is a block driver state tree inserted as -# a medium, it will become inaccessible to the guest (but it will remain -# associated to the block device, so closing the tray will make it accessible -# again). -# -# If the tray was already open before, this will be a no-op. -# -# Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in -# which no such event will be generated, these include: -# - if the guest has locked the tray, @force is false and the guest does not -# respond to the eject request -# - if the BlockBackend denoted by @device does not have a guest device attached -# to it -# - if the guest device does not have an actual tray -# -# @device: block device name -# -# @force: #optional if false (the default), an eject request will be sent to -# the guest if it has locked the tray (and the tray will not be opened -# immediately); if true, the tray will be opened regardless of whether -# it is locked -# -# Since: 2.5 -## -{ 'command': 'blockdev-open-tray', - 'data': { 'device': 'str', - '*force': 'bool' } } - -## -# @blockdev-close-tray: -# -# Closes a block device's tray. If there is a block driver state tree associated -# with the block device (which is currently ejected), that tree will be loaded -# as the medium. -# -# If the tray was already closed before, this will be a no-op. -# -# @device: block device name -# -# Since: 2.5 -## -{ 'command': 'blockdev-close-tray', - 'data': { 'device': 'str' } } - -## -# @x-blockdev-remove-medium: -# -# Removes a medium (a block driver state tree) from a block device. That block -# device's tray must currently be open (unless there is no attached guest -# device). -# -# If the tray is open and there is no medium inserted, this will be a no-op. -# -# This command is still a work in progress and is considered experimental. -# Stay away from it unless you want to help with its development. -# -# @device: block device name -# -# Since: 2.5 -## -{ 'command': 'x-blockdev-remove-medium', - 'data': { 'device': 'str' } } - -## -# @x-blockdev-insert-medium: -# -# Inserts a medium (a block driver state tree) into a block device. That block -# device's tray must currently be open (unless there is no attached guest -# device) and there must be no medium inserted already. -# -# This command is still a work in progress and is considered experimental. -# Stay away from it unless you want to help with its development. -# -# @device: block device name -# -# @node-name: name of a node in the block driver state graph -# -# Since: 2.5 -## -{ 'command': 'x-blockdev-insert-medium', - 'data': { 'device': 'str', - 'node-name': 'str'} } - - -## -# @BlockdevChangeReadOnlyMode: -# -# Specifies the new read-only mode of a block device subject to the -# @blockdev-change-medium command. -# -# @retain: Retains the current read-only mode -# -# @read-only: Makes the device read-only -# -# @read-write: Makes the device writable -# -# Since: 2.3 -## -{ 'enum': 'BlockdevChangeReadOnlyMode', - 'data': ['retain', 'read-only', 'read-write'] } - - -## -# @blockdev-change-medium: -# -# Changes the medium inserted into a block device by ejecting the current medium -# and loading a new image file which is inserted as the new medium (this command -# combines blockdev-open-tray, x-blockdev-remove-medium, -# x-blockdev-insert-medium and blockdev-close-tray). -# -# @device: block device name -# -# @filename: filename of the new image to be loaded -# -# @format: #optional, format to open the new image with (defaults to -# the probed format) -# -# @read-only-mode: #optional, change the read-only mode of the device; defaults -# to 'retain' -# -# Since: 2.5 -## -{ 'command': 'blockdev-change-medium', - 'data': { 'device': 'str', - 'filename': 'str', - '*format': 'str', - '*read-only-mode': 'BlockdevChangeReadOnlyMode' } } - - -## -# @BlockErrorAction -# -# An enumeration of action that has been taken when a DISK I/O occurs -# -# @ignore: error has been ignored -# -# @report: error has been reported to the device -# -# @stop: error caused VM to be stopped -# -# Since: 2.1 -## -{ 'enum': 'BlockErrorAction', - 'data': [ 'ignore', 'report', 'stop' ] } - - -## -# @BLOCK_IMAGE_CORRUPTED -# -# Emitted when a corruption has been detected in a disk image -# -# @device: device name. This is always present for compatibility -# reasons, but it can be empty ("") if the image does not -# have a device name associated. -# -# @node-name: #optional node name (Since: 2.4) -# -# @msg: informative message for human consumption, such as the kind of -# corruption being detected. It should not be parsed by machine as it is -# not guaranteed to be stable -# -# @offset: #optional, if the corruption resulted from an image access, this is -# the host's access offset into the image -# -# @size: #optional, if the corruption resulted from an image access, this is -# the access size -# -# fatal: if set, the image is marked corrupt and therefore unusable after this -# event and must be repaired (Since 2.2; before, every -# BLOCK_IMAGE_CORRUPTED event was fatal) -# -# Since: 1.7 -## -{ 'event': 'BLOCK_IMAGE_CORRUPTED', - 'data': { 'device' : 'str', - '*node-name' : 'str', - 'msg' : 'str', - '*offset' : 'int', - '*size' : 'int', - 'fatal' : 'bool' } } - -## -# @BLOCK_IO_ERROR -# -# Emitted when a disk I/O error occurs -# -# @device: device name -# -# @operation: I/O operation -# -# @action: action that has been taken -# -# @nospace: #optional true if I/O error was caused due to a no-space -# condition. This key is only present if query-block's -# io-status is present, please see query-block documentation -# for more information (since: 2.2) -# -# @reason: human readable string describing the error cause. -# (This field is a debugging aid for humans, it should not -# be parsed by applications) (since: 2.2) -# -# Note: If action is "stop", a STOP event will eventually follow the -# BLOCK_IO_ERROR event -# -# Since: 0.13.0 -## -{ 'event': 'BLOCK_IO_ERROR', - 'data': { 'device': 'str', 'operation': 'IoOperationType', - 'action': 'BlockErrorAction', '*nospace': 'bool', - 'reason': 'str' } } - -## -# @BLOCK_JOB_COMPLETED -# -# Emitted when a block job has completed -# -# @type: job type -# -# @device: device name -# -# @len: maximum progress value -# -# @offset: current progress value. On success this is equal to len. -# On failure this is less than len -# -# @speed: rate limit, bytes per second -# -# @error: #optional, error message. Only present on failure. This field -# contains a human-readable error message. There are no semantics -# other than that streaming has failed and clients should not try to -# interpret the error string -# -# Since: 1.1 -## -{ 'event': 'BLOCK_JOB_COMPLETED', - 'data': { 'type' : 'BlockJobType', - 'device': 'str', - 'len' : 'int', - 'offset': 'int', - 'speed' : 'int', - '*error': 'str' } } - -## -# @BLOCK_JOB_CANCELLED -# -# Emitted when a block job has been cancelled -# -# @type: job type -# -# @device: device name -# -# @len: maximum progress value -# -# @offset: current progress value. On success this is equal to len. -# On failure this is less than len -# -# @speed: rate limit, bytes per second -# -# Since: 1.1 -## -{ 'event': 'BLOCK_JOB_CANCELLED', - 'data': { 'type' : 'BlockJobType', - 'device': 'str', - 'len' : 'int', - 'offset': 'int', - 'speed' : 'int' } } - -## -# @BLOCK_JOB_ERROR -# -# Emitted when a block job encounters an error -# -# @device: device name -# -# @operation: I/O operation -# -# @action: action that has been taken -# -# Since: 1.3 -## -{ 'event': 'BLOCK_JOB_ERROR', - 'data': { 'device' : 'str', - 'operation': 'IoOperationType', - 'action' : 'BlockErrorAction' } } - -## -# @BLOCK_JOB_READY -# -# Emitted when a block job is ready to complete -# -# @type: job type -# -# @device: device name -# -# @len: maximum progress value -# -# @offset: current progress value. On success this is equal to len. -# On failure this is less than len -# -# @speed: rate limit, bytes per second -# -# Note: The "ready to complete" status is always reset by a @BLOCK_JOB_ERROR -# event -# -# Since: 1.3 -## -{ 'event': 'BLOCK_JOB_READY', - 'data': { 'type' : 'BlockJobType', - 'device': 'str', - 'len' : 'int', - 'offset': 'int', - 'speed' : 'int' } } - -# @PreallocMode -# -# Preallocation mode of QEMU image file -# -# @off: no preallocation -# @metadata: preallocate only for metadata -# @falloc: like @full preallocation but allocate disk space by -# posix_fallocate() rather than writing zeros. -# @full: preallocate all data by writing zeros to device to ensure disk -# space is really available. @full preallocation also sets up -# metadata correctly. -# -# Since 2.2 -## -{ 'enum': 'PreallocMode', - 'data': [ 'off', 'metadata', 'falloc', 'full' ] } - -## -# @BLOCK_WRITE_THRESHOLD -# -# Emitted when writes on block device reaches or exceeds the -# configured write threshold. For thin-provisioned devices, this -# means the device should be extended to avoid pausing for -# disk exhaustion. -# The event is one shot. Once triggered, it needs to be -# re-registered with another block-set-threshold command. -# -# @node-name: graph node name on which the threshold was exceeded. -# -# @amount-exceeded: amount of data which exceeded the threshold, in bytes. -# -# @write-threshold: last configured threshold, in bytes. -# -# Since: 2.3 -## -{ 'event': 'BLOCK_WRITE_THRESHOLD', - 'data': { 'node-name': 'str', - 'amount-exceeded': 'uint64', - 'write-threshold': 'uint64' } } - -## -# @block-set-write-threshold -# -# Change the write threshold for a block drive. An event will be delivered -# if a write to this block drive crosses the configured threshold. -# This is useful to transparently resize thin-provisioned drives without -# the guest OS noticing. -# -# @node-name: graph node name on which the threshold must be set. -# -# @write-threshold: configured threshold for the block device, bytes. -# Use 0 to disable the threshold. -# -# Since: 2.3 -## -{ 'command': 'block-set-write-threshold', - 'data': { 'node-name': 'str', 'write-threshold': 'uint64' } } -- cgit 1.2.3-korg