From bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 Mon Sep 17 00:00:00 2001 From: RajithaY Date: Tue, 25 Apr 2017 03:31:15 -0700 Subject: Adding qemu as a submodule of KVMFORNFV This Patch includes the changes to add qemu as a submodule to kvmfornfv repo and make use of the updated latest qemu for the execution of all testcase Change-Id: I1280af507a857675c7f81d30c95255635667bdd7 Signed-off-by:RajithaY --- qemu/HACKING | 214 ----------------------------------------------------------- 1 file changed, 214 deletions(-) delete mode 100644 qemu/HACKING (limited to 'qemu/HACKING') diff --git a/qemu/HACKING b/qemu/HACKING deleted file mode 100644 index 058aa8fd4..000000000 --- a/qemu/HACKING +++ /dev/null @@ -1,214 +0,0 @@ -1. Preprocessor - -For variadic macros, stick with this C99-like syntax: - -#define DPRINTF(fmt, ...) \ - do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0) - -2. C types - -It should be common sense to use the right type, but we have collected -a few useful guidelines here. - -2.1. Scalars - -If you're using "int" or "long", odds are good that there's a better type. -If a variable is counting something, it should be declared with an -unsigned type. - -If it's host memory-size related, size_t should be a good choice (use -ssize_t only if required). Guest RAM memory offsets must use ram_addr_t, -but only for RAM, it may not cover whole guest address space. - -If it's file-size related, use off_t. -If it's file-offset related (i.e., signed), use off_t. -If it's just counting small numbers use "unsigned int"; -(on all but oddball embedded systems, you can assume that that -type is at least four bytes wide). - -In the event that you require a specific width, use a standard type -like int32_t, uint32_t, uint64_t, etc. The specific types are -mandatory for VMState fields. - -Don't use Linux kernel internal types like u32, __u32 or __le32. - -Use hwaddr for guest physical addresses except pcibus_t -for PCI addresses. In addition, ram_addr_t is a QEMU internal address -space that maps guest RAM physical addresses into an intermediate -address space that can map to host virtual address spaces. Generally -speaking, the size of guest memory can always fit into ram_addr_t but -it would not be correct to store an actual guest physical address in a -ram_addr_t. - -For CPU virtual addresses there are several possible types. -vaddr is the best type to use to hold a CPU virtual address in -target-independent code. It is guaranteed to be large enough to hold a -virtual address for any target, and it does not change size from target -to target. It is always unsigned. -target_ulong is a type the size of a virtual address on the CPU; this means -it may be 32 or 64 bits depending on which target is being built. It should -therefore be used only in target-specific code, and in some -performance-critical built-per-target core code such as the TLB code. -There is also a signed version, target_long. -abi_ulong is for the *-user targets, and represents a type the size of -'void *' in that target's ABI. (This may not be the same as the size of a -full CPU virtual address in the case of target ABIs which use 32 bit pointers -on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match -the target's ABI must use this type for anything that on the target is defined -to be an 'unsigned long' or a pointer type. -There is also a signed version, abi_long. - -Of course, take all of the above with a grain of salt. If you're about -to use some system interface that requires a type like size_t, pid_t or -off_t, use matching types for any corresponding variables. - -Also, if you try to use e.g., "unsigned int" as a type, and that -conflicts with the signedness of a related variable, sometimes -it's best just to use the *wrong* type, if "pulling the thread" -and fixing all related variables would be too invasive. - -Finally, while using descriptive types is important, be careful not to -go overboard. If whatever you're doing causes warnings, or requires -casts, then reconsider or ask for help. - -2.2. Pointers - -Ensure that all of your pointers are "const-correct". -Unless a pointer is used to modify the pointed-to storage, -give it the "const" attribute. That way, the reader knows -up-front that this is a read-only pointer. Perhaps more -importantly, if we're diligent about this, when you see a non-const -pointer, you're guaranteed that it is used to modify the storage -it points to, or it is aliased to another pointer that is. - -2.3. Typedefs -Typedefs are used to eliminate the redundant 'struct' keyword. - -2.4. Reserved namespaces in C and POSIX -Underscore capital, double underscore, and underscore 't' suffixes should be -avoided. - -3. Low level memory management - -Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign -APIs is not allowed in the QEMU codebase. Instead of these routines, -use the GLib memory allocation routines g_malloc/g_malloc0/g_new/ -g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree -APIs. - -Please note that g_malloc will exit on allocation failure, so there -is no need to test for failure (as you would have to with malloc). -Calling g_malloc with a zero size is valid and will return NULL. - -Memory allocated by qemu_memalign or qemu_blockalign must be freed with -qemu_vfree, since breaking this will cause problems on Win32. - -4. String manipulation - -Do not use the strncpy function. As mentioned in the man page, it does *not* -guarantee a NULL-terminated buffer, which makes it extremely dangerous to use. -It also zeros trailing destination bytes out to the specified length. Instead, -use this similar function when possible, but note its different signature: -void pstrcpy(char *dest, int dest_buf_size, const char *src) - -Don't use strcat because it can't check for buffer overflows, but: -char *pstrcat(char *buf, int buf_size, const char *s) - -The same limitation exists with sprintf and vsprintf, so use snprintf and -vsnprintf. - -QEMU provides other useful string functions: -int strstart(const char *str, const char *val, const char **ptr) -int stristart(const char *str, const char *val, const char **ptr) -int qemu_strnlen(const char *s, int max_len) - -There are also replacement character processing macros for isxyz and toxyz, -so instead of e.g. isalnum you should use qemu_isalnum. - -Because of the memory management rules, you must use g_strdup/g_strndup -instead of plain strdup/strndup. - -5. Printf-style functions - -Whenever you add a new printf-style function, i.e., one with a format -string argument and following "..." in its prototype, be sure to use -gcc's printf attribute directive in the prototype. - -This makes it so gcc's -Wformat and -Wformat-security options can do -their jobs and cross-check format strings with the number and types -of arguments. - -6. C standard, implementation defined and undefined behaviors - -C code in QEMU should be written to the C99 language specification. A copy -of the final version of the C99 standard with corrigenda TC1, TC2, and TC3 -included, formatted as a draft, can be downloaded from: - http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf - -The C language specification defines regions of undefined behavior and -implementation defined behavior (to give compiler authors enough leeway to -produce better code). In general, code in QEMU should follow the language -specification and avoid both undefined and implementation defined -constructs. ("It works fine on the gcc I tested it with" is not a valid -argument...) However there are a few areas where we allow ourselves to -assume certain behaviors because in practice all the platforms we care about -behave in the same way and writing strictly conformant code would be -painful. These are: - * you may assume that integers are 2s complement representation - * you may assume that right shift of a signed integer duplicates - the sign bit (ie it is an arithmetic shift, not a logical shift) - -7. Error handling and reporting - -7.1 Reporting errors to the human user - -Do not use printf(), fprintf() or monitor_printf(). Instead, use -error_report() or error_vreport() from error-report.h. This ensures the -error is reported in the right place (current monitor or stderr), and in -a uniform format. - -Use error_printf() & friends to print additional information. - -error_report() prints the current location. In certain common cases -like command line parsing, the current location is tracked -automatically. To manipulate it manually, use the loc_*() from -error-report.h. - -7.2 Propagating errors - -An error can't always be reported to the user right where it's detected, -but often needs to be propagated up the call chain to a place that can -handle it. This can be done in various ways. - -The most flexible one is Error objects. See error.h for usage -information. - -Use the simplest suitable method to communicate success / failure to -callers. Stick to common methods: non-negative on success / -1 on -error, non-negative / -errno, non-null / null, or Error objects. - -Example: when a function returns a non-null pointer on success, and it -can fail only in one way (as far as the caller is concerned), returning -null on failure is just fine, and certainly simpler and a lot easier on -the eyes than propagating an Error object through an Error ** parameter. - -Example: when a function's callers need to report details on failure -only the function really knows, use Error **, and set suitable errors. - -Do not report an error to the user when you're also returning an error -for somebody else to handle. Leave the reporting to the place that -consumes the error returned. - -7.3 Handling errors - -Calling exit() is fine when handling configuration errors during -startup. It's problematic during normal operation. In particular, -monitor commands should never exit(). - -Do not call exit() or abort() to handle an error that can be triggered -by the guest (e.g., some unimplemented corner case in guest code -translation or device emulation). Guests should not be able to -terminate QEMU. - -Note that &error_fatal is just another way to exit(1), and &error_abort -is just another way to abort(). -- cgit 1.2.3-korg