From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/net/netfilter/ipvs/Kconfig | 291 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100644 kernel/net/netfilter/ipvs/Kconfig (limited to 'kernel/net/netfilter/ipvs/Kconfig') diff --git a/kernel/net/netfilter/ipvs/Kconfig b/kernel/net/netfilter/ipvs/Kconfig new file mode 100644 index 000000000..3b6929dec --- /dev/null +++ b/kernel/net/netfilter/ipvs/Kconfig @@ -0,0 +1,291 @@ +# +# IP Virtual Server configuration +# +menuconfig IP_VS + tristate "IP virtual server support" + depends on NET && INET && NETFILTER + depends on (NF_CONNTRACK || NF_CONNTRACK=n) + ---help--- + IP Virtual Server support will let you build a high-performance + virtual server based on cluster of two or more real servers. This + option must be enabled for at least one of the clustered computers + that will take care of intercepting incoming connections to a + single IP address and scheduling them to real servers. + + Three request dispatching techniques are implemented, they are + virtual server via NAT, virtual server via tunneling and virtual + server via direct routing. The several scheduling algorithms can + be used to choose which server the connection is directed to, + thus load balancing can be achieved among the servers. For more + information and its administration program, please visit the + following URL: . + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +if IP_VS + +config IP_VS_IPV6 + bool "IPv6 support for IPVS" + depends on IPV6 = y || IP_VS = IPV6 + select IP6_NF_IPTABLES + ---help--- + Add IPv6 support to IPVS. + + Say Y if unsure. + +config IP_VS_DEBUG + bool "IP virtual server debugging" + ---help--- + Say Y here if you want to get additional messages useful in + debugging the IP virtual server code. You can change the debug + level in /proc/sys/net/ipv4/vs/debug_level + +config IP_VS_TAB_BITS + int "IPVS connection table size (the Nth power of 2)" + range 8 20 + default 12 + ---help--- + The IPVS connection hash table uses the chaining scheme to handle + hash collisions. Using a big IPVS connection hash table will greatly + reduce conflicts when there are hundreds of thousands of connections + in the hash table. + + Note the table size must be power of 2. The table size will be the + value of 2 to the your input number power. The number to choose is + from 8 to 20, the default number is 12, which means the table size + is 4096. Don't input the number too small, otherwise you will lose + performance on it. You can adapt the table size yourself, according + to your virtual server application. It is good to set the table size + not far less than the number of connections per second multiplying + average lasting time of connection in the table. For example, your + virtual server gets 200 connections per second, the connection lasts + for 200 seconds in average in the connection table, the table size + should be not far less than 200x200, it is good to set the table + size 32768 (2**15). + + Another note that each connection occupies 128 bytes effectively and + each hash entry uses 8 bytes, so you can estimate how much memory is + needed for your box. + + You can overwrite this number setting conn_tab_bits module parameter + or by appending ip_vs.conn_tab_bits=? to the kernel command line + if IP VS was compiled built-in. + +comment "IPVS transport protocol load balancing support" + +config IP_VS_PROTO_TCP + bool "TCP load balancing support" + ---help--- + This option enables support for load balancing TCP transport + protocol. Say Y if unsure. + +config IP_VS_PROTO_UDP + bool "UDP load balancing support" + ---help--- + This option enables support for load balancing UDP transport + protocol. Say Y if unsure. + +config IP_VS_PROTO_AH_ESP + def_bool IP_VS_PROTO_ESP || IP_VS_PROTO_AH + +config IP_VS_PROTO_ESP + bool "ESP load balancing support" + ---help--- + This option enables support for load balancing ESP (Encapsulation + Security Payload) transport protocol. Say Y if unsure. + +config IP_VS_PROTO_AH + bool "AH load balancing support" + ---help--- + This option enables support for load balancing AH (Authentication + Header) transport protocol. Say Y if unsure. + +config IP_VS_PROTO_SCTP + bool "SCTP load balancing support" + select LIBCRC32C + ---help--- + This option enables support for load balancing SCTP transport + protocol. Say Y if unsure. + +comment "IPVS scheduler" + +config IP_VS_RR + tristate "round-robin scheduling" + ---help--- + The robin-robin scheduling algorithm simply directs network + connections to different real servers in a round-robin manner. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_WRR + tristate "weighted round-robin scheduling" + ---help--- + The weighted robin-robin scheduling algorithm directs network + connections to different real servers based on server weights + in a round-robin manner. Servers with higher weights receive + new connections first than those with less weights, and servers + with higher weights get more connections than those with less + weights and servers with equal weights get equal connections. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_LC + tristate "least-connection scheduling" + ---help--- + The least-connection scheduling algorithm directs network + connections to the server with the least number of active + connections. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_WLC + tristate "weighted least-connection scheduling" + ---help--- + The weighted least-connection scheduling algorithm directs network + connections to the server with the least active connections + normalized by the server weight. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_FO + tristate "weighted failover scheduling" + ---help--- + The weighted failover scheduling algorithm directs network + connections to the server with the highest weight that is + currently available. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_LBLC + tristate "locality-based least-connection scheduling" + ---help--- + The locality-based least-connection scheduling algorithm is for + destination IP load balancing. It is usually used in cache cluster. + This algorithm usually directs packet destined for an IP address to + its server if the server is alive and under load. If the server is + overloaded (its active connection numbers is larger than its weight) + and there is a server in its half load, then allocate the weighted + least-connection server to this IP address. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_LBLCR + tristate "locality-based least-connection with replication scheduling" + ---help--- + The locality-based least-connection with replication scheduling + algorithm is also for destination IP load balancing. It is + usually used in cache cluster. It differs from the LBLC scheduling + as follows: the load balancer maintains mappings from a target + to a set of server nodes that can serve the target. Requests for + a target are assigned to the least-connection node in the target's + server set. If all the node in the server set are over loaded, + it picks up a least-connection node in the cluster and adds it + in the sever set for the target. If the server set has not been + modified for the specified time, the most loaded node is removed + from the server set, in order to avoid high degree of replication. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_DH + tristate "destination hashing scheduling" + ---help--- + The destination hashing scheduling algorithm assigns network + connections to the servers through looking up a statically assigned + hash table by their destination IP addresses. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_SH + tristate "source hashing scheduling" + ---help--- + The source hashing scheduling algorithm assigns network + connections to the servers through looking up a statically assigned + hash table by their source IP addresses. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_SED + tristate "shortest expected delay scheduling" + ---help--- + The shortest expected delay scheduling algorithm assigns network + connections to the server with the shortest expected delay. The + expected delay that the job will experience is (Ci + 1) / Ui if + sent to the ith server, in which Ci is the number of connections + on the ith server and Ui is the fixed service rate (weight) + of the ith server. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_NQ + tristate "never queue scheduling" + ---help--- + The never queue scheduling algorithm adopts a two-speed model. + When there is an idle server available, the job will be sent to + the idle server, instead of waiting for a fast one. When there + is no idle server available, the job will be sent to the server + that minimize its expected delay (The Shortest Expected Delay + scheduling algorithm). + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +comment 'IPVS SH scheduler' + +config IP_VS_SH_TAB_BITS + int "IPVS source hashing table size (the Nth power of 2)" + range 4 20 + default 8 + ---help--- + The source hashing scheduler maps source IPs to destinations + stored in a hash table. This table is tiled by each destination + until all slots in the table are filled. When using weights to + allow destinations to receive more connections, the table is + tiled an amount proportional to the weights specified. The table + needs to be large enough to effectively fit all the destinations + multiplied by their respective weights. + +comment 'IPVS application helper' + +config IP_VS_FTP + tristate "FTP protocol helper" + depends on IP_VS_PROTO_TCP && NF_CONNTRACK && NF_NAT && \ + NF_CONNTRACK_FTP + select IP_VS_NFCT + ---help--- + FTP is a protocol that transfers IP address and/or port number in + the payload. In the virtual server via Network Address Translation, + the IP address and port number of real servers cannot be sent to + clients in ftp connections directly, so FTP protocol helper is + required for tracking the connection and mangling it back to that of + virtual service. + + If you want to compile it in kernel, say Y. To compile it as a + module, choose M here. If unsure, say N. + +config IP_VS_NFCT + bool "Netfilter connection tracking" + depends on NF_CONNTRACK + ---help--- + The Netfilter connection tracking support allows the IPVS + connection state to be exported to the Netfilter framework + for filtering purposes. + +config IP_VS_PE_SIP + tristate "SIP persistence engine" + depends on IP_VS_PROTO_UDP + depends on NF_CONNTRACK_SIP + ---help--- + Allow persistence based on the SIP Call-ID + +endif # IP_VS -- cgit 1.2.3-korg