From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/include/linux/mtd/bbm.h | 172 +++++ kernel/include/linux/mtd/blktrans.h | 96 +++ kernel/include/linux/mtd/cfi.h | 564 +++++++++++++++ kernel/include/linux/mtd/cfi_endian.h | 53 ++ kernel/include/linux/mtd/concat.h | 34 + kernel/include/linux/mtd/doc2000.h | 220 ++++++ kernel/include/linux/mtd/flashchip.h | 112 +++ kernel/include/linux/mtd/fsmc.h | 174 +++++ kernel/include/linux/mtd/ftl.h | 74 ++ kernel/include/linux/mtd/gen_probe.h | 37 + kernel/include/linux/mtd/inftl.h | 63 ++ kernel/include/linux/mtd/latch-addr-flash.h | 29 + kernel/include/linux/mtd/lpc32xx_mlc.h | 20 + kernel/include/linux/mtd/lpc32xx_slc.h | 20 + kernel/include/linux/mtd/map.h | 486 +++++++++++++ kernel/include/linux/mtd/mtd.h | 414 +++++++++++ kernel/include/linux/mtd/mtdram.h | 8 + kernel/include/linux/mtd/nand-gpio.h | 19 + kernel/include/linux/mtd/nand.h | 1029 +++++++++++++++++++++++++++ kernel/include/linux/mtd/nand_bch.h | 72 ++ kernel/include/linux/mtd/nand_ecc.h | 42 ++ kernel/include/linux/mtd/ndfc.h | 67 ++ kernel/include/linux/mtd/nftl.h | 72 ++ kernel/include/linux/mtd/onenand.h | 242 +++++++ kernel/include/linux/mtd/onenand_regs.h | 223 ++++++ kernel/include/linux/mtd/partitions.h | 88 +++ kernel/include/linux/mtd/pfow.h | 156 ++++ kernel/include/linux/mtd/physmap.h | 36 + kernel/include/linux/mtd/pismo.h | 17 + kernel/include/linux/mtd/plat-ram.h | 34 + kernel/include/linux/mtd/qinfo.h | 91 +++ kernel/include/linux/mtd/sh_flctl.h | 192 +++++ kernel/include/linux/mtd/sharpsl.h | 20 + kernel/include/linux/mtd/spear_smi.h | 65 ++ kernel/include/linux/mtd/spi-nor.h | 216 ++++++ kernel/include/linux/mtd/super.h | 29 + kernel/include/linux/mtd/ubi.h | 284 ++++++++ kernel/include/linux/mtd/xip.h | 99 +++ 38 files changed, 5669 insertions(+) create mode 100644 kernel/include/linux/mtd/bbm.h create mode 100644 kernel/include/linux/mtd/blktrans.h create mode 100644 kernel/include/linux/mtd/cfi.h create mode 100644 kernel/include/linux/mtd/cfi_endian.h create mode 100644 kernel/include/linux/mtd/concat.h create mode 100644 kernel/include/linux/mtd/doc2000.h create mode 100644 kernel/include/linux/mtd/flashchip.h create mode 100644 kernel/include/linux/mtd/fsmc.h create mode 100644 kernel/include/linux/mtd/ftl.h create mode 100644 kernel/include/linux/mtd/gen_probe.h create mode 100644 kernel/include/linux/mtd/inftl.h create mode 100644 kernel/include/linux/mtd/latch-addr-flash.h create mode 100644 kernel/include/linux/mtd/lpc32xx_mlc.h create mode 100644 kernel/include/linux/mtd/lpc32xx_slc.h create mode 100644 kernel/include/linux/mtd/map.h create mode 100644 kernel/include/linux/mtd/mtd.h create mode 100644 kernel/include/linux/mtd/mtdram.h create mode 100644 kernel/include/linux/mtd/nand-gpio.h create mode 100644 kernel/include/linux/mtd/nand.h create mode 100644 kernel/include/linux/mtd/nand_bch.h create mode 100644 kernel/include/linux/mtd/nand_ecc.h create mode 100644 kernel/include/linux/mtd/ndfc.h create mode 100644 kernel/include/linux/mtd/nftl.h create mode 100644 kernel/include/linux/mtd/onenand.h create mode 100644 kernel/include/linux/mtd/onenand_regs.h create mode 100644 kernel/include/linux/mtd/partitions.h create mode 100644 kernel/include/linux/mtd/pfow.h create mode 100644 kernel/include/linux/mtd/physmap.h create mode 100644 kernel/include/linux/mtd/pismo.h create mode 100644 kernel/include/linux/mtd/plat-ram.h create mode 100644 kernel/include/linux/mtd/qinfo.h create mode 100644 kernel/include/linux/mtd/sh_flctl.h create mode 100644 kernel/include/linux/mtd/sharpsl.h create mode 100644 kernel/include/linux/mtd/spear_smi.h create mode 100644 kernel/include/linux/mtd/spi-nor.h create mode 100644 kernel/include/linux/mtd/super.h create mode 100644 kernel/include/linux/mtd/ubi.h create mode 100644 kernel/include/linux/mtd/xip.h (limited to 'kernel/include/linux/mtd') diff --git a/kernel/include/linux/mtd/bbm.h b/kernel/include/linux/mtd/bbm.h new file mode 100644 index 000000000..36bb6a503 --- /dev/null +++ b/kernel/include/linux/mtd/bbm.h @@ -0,0 +1,172 @@ +/* + * linux/include/linux/mtd/bbm.h + * + * NAND family Bad Block Management (BBM) header file + * - Bad Block Table (BBT) implementation + * + * Copyright © 2005 Samsung Electronics + * Kyungmin Park + * + * Copyright © 2000-2005 + * Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#ifndef __LINUX_MTD_BBM_H +#define __LINUX_MTD_BBM_H + +/* The maximum number of NAND chips in an array */ +#define NAND_MAX_CHIPS 8 + +/** + * struct nand_bbt_descr - bad block table descriptor + * @options: options for this descriptor + * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE + * when bbt is searched, then we store the found bbts pages here. + * Its an array and supports up to 8 chips now + * @offs: offset of the pattern in the oob area of the page + * @veroffs: offset of the bbt version counter in the oob are of the page + * @version: version read from the bbt page during scan + * @len: length of the pattern, if 0 no pattern check is performed + * @maxblocks: maximum number of blocks to search for a bbt. This number of + * blocks is reserved at the end of the device where the tables are + * written. + * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than + * bad) block in the stored bbt + * @pattern: pattern to identify bad block table or factory marked good / + * bad blocks, can be NULL, if len = 0 + * + * Descriptor for the bad block table marker and the descriptor for the + * pattern which identifies good and bad blocks. The assumption is made + * that the pattern and the version count are always located in the oob area + * of the first block. + */ +struct nand_bbt_descr { + int options; + int pages[NAND_MAX_CHIPS]; + int offs; + int veroffs; + uint8_t version[NAND_MAX_CHIPS]; + int len; + int maxblocks; + int reserved_block_code; + uint8_t *pattern; +}; + +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none exists */ +#define NAND_BBT_CREATE 0x00000200 +/* + * Create an empty BBT with no vendor information. Vendor's information may be + * unavailable, for example, if the NAND controller has a different data and OOB + * layout or if this information is already purged. Must be used in conjunction + * with NAND_BBT_CREATE. + */ +#define NAND_BBT_CREATE_EMPTY 0x00000400 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00002000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00004000 +/* Search good / bad pattern on the first and the second page */ +#define NAND_BBT_SCAN2NDPAGE 0x00008000 +/* Search good / bad pattern on the last page of the eraseblock */ +#define NAND_BBT_SCANLASTPAGE 0x00010000 +/* + * Use a flash based bad block table. By default, OOB identifier is saved in + * OOB area. This option is passed to the default bad block table function. + */ +#define NAND_BBT_USE_FLASH 0x00020000 +/* + * Do not store flash based bad block table marker in the OOB area; store it + * in-band. + */ +#define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 + +/* + * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr + * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * in nand_chip.bbt_options. + */ +#define NAND_BBT_DYNAMICSTRUCT 0x80000000 + +/* The maximum number of blocks to scan for a bbt */ +#define NAND_BBT_SCAN_MAXBLOCKS 4 + +/* + * Constants for oob configuration + */ +#define NAND_SMALL_BADBLOCK_POS 5 +#define NAND_LARGE_BADBLOCK_POS 0 +#define ONENAND_BADBLOCK_POS 0 + +/* + * Bad block scanning errors + */ +#define ONENAND_BBT_READ_ERROR 1 +#define ONENAND_BBT_READ_ECC_ERROR 2 +#define ONENAND_BBT_READ_FATAL_ERROR 4 + +/** + * struct bbm_info - [GENERIC] Bad Block Table data structure + * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry + * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @options: options for this descriptor + * @bbt: [INTERN] bad block table pointer + * @isbad_bbt: function to determine if a block is bad + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for + * initial bad block scan + * @priv: [OPTIONAL] pointer to private bbm date + */ +struct bbm_info { + int bbt_erase_shift; + int badblockpos; + int options; + + uint8_t *bbt; + + int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt); + + /* TODO Add more NAND specific fileds */ + struct nand_bbt_descr *badblock_pattern; + + void *priv; +}; + +/* OneNAND BBT interface */ +extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int onenand_default_bbt(struct mtd_info *mtd); + +#endif /* __LINUX_MTD_BBM_H */ diff --git a/kernel/include/linux/mtd/blktrans.h b/kernel/include/linux/mtd/blktrans.h new file mode 100644 index 000000000..e93837f64 --- /dev/null +++ b/kernel/include/linux/mtd/blktrans.h @@ -0,0 +1,96 @@ +/* + * Copyright © 2003-2010 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_TRANS_H__ +#define __MTD_TRANS_H__ + +#include +#include +#include +#include + +struct hd_geometry; +struct mtd_info; +struct mtd_blktrans_ops; +struct file; +struct inode; + +struct mtd_blktrans_dev { + struct mtd_blktrans_ops *tr; + struct list_head list; + struct mtd_info *mtd; + struct mutex lock; + int devnum; + bool bg_stop; + unsigned long size; + int readonly; + int open; + struct kref ref; + struct gendisk *disk; + struct attribute_group *disk_attributes; + struct workqueue_struct *wq; + struct work_struct work; + struct request_queue *rq; + spinlock_t queue_lock; + void *priv; + fmode_t file_mode; +}; + +struct mtd_blktrans_ops { + char *name; + int major; + int part_bits; + int blksize; + int blkshift; + + /* Access functions */ + int (*readsect)(struct mtd_blktrans_dev *dev, + unsigned long block, char *buffer); + int (*writesect)(struct mtd_blktrans_dev *dev, + unsigned long block, char *buffer); + int (*discard)(struct mtd_blktrans_dev *dev, + unsigned long block, unsigned nr_blocks); + void (*background)(struct mtd_blktrans_dev *dev); + + /* Block layer ioctls */ + int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo); + int (*flush)(struct mtd_blktrans_dev *dev); + + /* Called with mtd_table_mutex held; no race with add/remove */ + int (*open)(struct mtd_blktrans_dev *dev); + void (*release)(struct mtd_blktrans_dev *dev); + + /* Called on {de,}registration and on subsequent addition/removal + of devices, with mtd_table_mutex held. */ + void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd); + void (*remove_dev)(struct mtd_blktrans_dev *dev); + + struct list_head devs; + struct list_head list; + struct module *owner; +}; + +extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr); +extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr); +extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); +extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); +extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev); + + +#endif /* __MTD_TRANS_H__ */ diff --git a/kernel/include/linux/mtd/cfi.h b/kernel/include/linux/mtd/cfi.h new file mode 100644 index 000000000..299d7d31f --- /dev/null +++ b/kernel/include/linux/mtd/cfi.h @@ -0,0 +1,564 @@ +/* + * Copyright © 2000-2010 David Woodhouse et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_CFI_H__ +#define __MTD_CFI_H__ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_CFI_I1 +#define cfi_interleave(cfi) 1 +#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1) +#else +#define cfi_interleave_is_1(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I2 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 2 +# endif +#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2) +#else +#define cfi_interleave_is_2(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I4 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 4 +# endif +#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4) +#else +#define cfi_interleave_is_4(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I8 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 8 +# endif +#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8) +#else +#define cfi_interleave_is_8(cfi) (0) +#endif + +#ifndef cfi_interleave +#warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. +static inline int cfi_interleave(void *cfi) +{ + BUG(); + return 0; +} +#endif + +static inline int cfi_interleave_supported(int i) +{ + switch (i) { +#ifdef CONFIG_MTD_CFI_I1 + case 1: +#endif +#ifdef CONFIG_MTD_CFI_I2 + case 2: +#endif +#ifdef CONFIG_MTD_CFI_I4 + case 4: +#endif +#ifdef CONFIG_MTD_CFI_I8 + case 8: +#endif + return 1; + + default: + return 0; + } +} + + +/* NB: these values must represents the number of bytes needed to meet the + * device type (x8, x16, x32). Eg. a 32 bit device is 4 x 8 bytes. + * These numbers are used in calculations. + */ +#define CFI_DEVICETYPE_X8 (8 / 8) +#define CFI_DEVICETYPE_X16 (16 / 8) +#define CFI_DEVICETYPE_X32 (32 / 8) +#define CFI_DEVICETYPE_X64 (64 / 8) + + +/* Device Interface Code Assignments from the "Common Flash Memory Interface + * Publication 100" dated December 1, 2001. + */ +#define CFI_INTERFACE_X8_ASYNC 0x0000 +#define CFI_INTERFACE_X16_ASYNC 0x0001 +#define CFI_INTERFACE_X8_BY_X16_ASYNC 0x0002 +#define CFI_INTERFACE_X32_ASYNC 0x0003 +#define CFI_INTERFACE_X16_BY_X32_ASYNC 0x0005 +#define CFI_INTERFACE_NOT_ALLOWED 0xffff + + +/* NB: We keep these structures in memory in HOST byteorder, except + * where individually noted. + */ + +/* Basic Query Structure */ +struct cfi_ident { + uint8_t qry[3]; + uint16_t P_ID; + uint16_t P_ADR; + uint16_t A_ID; + uint16_t A_ADR; + uint8_t VccMin; + uint8_t VccMax; + uint8_t VppMin; + uint8_t VppMax; + uint8_t WordWriteTimeoutTyp; + uint8_t BufWriteTimeoutTyp; + uint8_t BlockEraseTimeoutTyp; + uint8_t ChipEraseTimeoutTyp; + uint8_t WordWriteTimeoutMax; + uint8_t BufWriteTimeoutMax; + uint8_t BlockEraseTimeoutMax; + uint8_t ChipEraseTimeoutMax; + uint8_t DevSize; + uint16_t InterfaceDesc; + uint16_t MaxBufWriteSize; + uint8_t NumEraseRegions; + uint32_t EraseRegionInfo[0]; /* Not host ordered */ +} __packed; + +/* Extended Query Structure for both PRI and ALT */ + +struct cfi_extquery { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; +} __packed; + +/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */ + +struct cfi_pri_intelext { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; + uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature + block follows - FIXME - not currently supported */ + uint8_t SuspendCmdSupport; + uint16_t BlkStatusRegMask; + uint8_t VccOptimal; + uint8_t VppOptimal; + uint8_t NumProtectionFields; + uint16_t ProtRegAddr; + uint8_t FactProtRegSize; + uint8_t UserProtRegSize; + uint8_t extra[0]; +} __packed; + +struct cfi_intelext_otpinfo { + uint32_t ProtRegAddr; + uint16_t FactGroups; + uint8_t FactProtRegSize; + uint16_t UserGroups; + uint8_t UserProtRegSize; +} __packed; + +struct cfi_intelext_blockinfo { + uint16_t NumIdentBlocks; + uint16_t BlockSize; + uint16_t MinBlockEraseCycles; + uint8_t BitsPerCell; + uint8_t BlockCap; +} __packed; + +struct cfi_intelext_regioninfo { + uint16_t NumIdentPartitions; + uint8_t NumOpAllowed; + uint8_t NumOpAllowedSimProgMode; + uint8_t NumOpAllowedSimEraMode; + uint8_t NumBlockTypes; + struct cfi_intelext_blockinfo BlockTypes[1]; +} __packed; + +struct cfi_intelext_programming_regioninfo { + uint8_t ProgRegShift; + uint8_t Reserved1; + uint8_t ControlValid; + uint8_t Reserved2; + uint8_t ControlInvalid; + uint8_t Reserved3; +} __packed; + +/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */ + +struct cfi_pri_amdstd { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; + uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */ + uint8_t EraseSuspend; + uint8_t BlkProt; + uint8_t TmpBlkUnprotect; + uint8_t BlkProtUnprot; + uint8_t SimultaneousOps; + uint8_t BurstMode; + uint8_t PageMode; + uint8_t VppMin; + uint8_t VppMax; + uint8_t TopBottom; +} __packed; + +/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */ + +struct cfi_pri_atmel { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; + uint8_t Features; + uint8_t BottomBoot; + uint8_t BurstMode; + uint8_t PageMode; +} __packed; + +struct cfi_pri_query { + uint8_t NumFields; + uint32_t ProtField[1]; /* Not host ordered */ +} __packed; + +struct cfi_bri_query { + uint8_t PageModeReadCap; + uint8_t NumFields; + uint32_t ConfField[1]; /* Not host ordered */ +} __packed; + +#define P_ID_NONE 0x0000 +#define P_ID_INTEL_EXT 0x0001 +#define P_ID_AMD_STD 0x0002 +#define P_ID_INTEL_STD 0x0003 +#define P_ID_AMD_EXT 0x0004 +#define P_ID_WINBOND 0x0006 +#define P_ID_ST_ADV 0x0020 +#define P_ID_MITSUBISHI_STD 0x0100 +#define P_ID_MITSUBISHI_EXT 0x0101 +#define P_ID_SST_PAGE 0x0102 +#define P_ID_SST_OLD 0x0701 +#define P_ID_INTEL_PERFORMANCE 0x0200 +#define P_ID_INTEL_DATA 0x0210 +#define P_ID_RESERVED 0xffff + + +#define CFI_MODE_CFI 1 +#define CFI_MODE_JEDEC 0 + +struct cfi_private { + uint16_t cmdset; + void *cmdset_priv; + int interleave; + int device_type; + int cfi_mode; /* Are we a JEDEC device pretending to be CFI? */ + int addr_unlock1; + int addr_unlock2; + struct mtd_info *(*cmdset_setup)(struct map_info *); + struct cfi_ident *cfiq; /* For now only one. We insist that all devs + must be of the same type. */ + int mfr, id; + int numchips; + map_word sector_erase_cmd; + unsigned long chipshift; /* Because they're of the same type */ + const char *im_name; /* inter_module name for cmdset_setup */ + struct flchip chips[0]; /* per-chip data structure for each chip */ +}; + +/* + * Returns the command address according to the given geometry. + */ +static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) +{ + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatibility mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; +} + +/* + * Transforms the CFI command for the given geometry (bus width & interleave). + * It looks too long to be inline, but in the common case it should almost all + * get optimised away. + */ +static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) +{ + map_word val = { {0} }; + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onecmd; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + /* First, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + default: BUG(); + case 1: + onecmd = cmd; + break; + case 2: + onecmd = cpu_to_cfi16(map, cmd); + break; + case 4: + onecmd = cpu_to_cfi32(map, cmd); + break; + } + + /* Now replicate it across the size of an unsigned long, or + just to the bus width as appropriate */ + switch (chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + onecmd |= (onecmd << (chip_mode * 32)); +#endif + case 4: + onecmd |= (onecmd << (chip_mode * 16)); + case 2: + onecmd |= (onecmd << (chip_mode * 8)); + case 1: + ; + } + + /* And finally, for the multi-word case, replicate it + in all words in the structure */ + for (i=0; i < words_per_bus; i++) { + val.x[i] = onecmd; + } + + return val; +} +#define CMD(x) cfi_build_cmd((x), map, cfi) + + +static inline unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi) +{ + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onestat, res = 0; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + onestat = val.x[0]; + /* Or all status words together */ + for (i=1; i < words_per_bus; i++) { + onestat |= val.x[i]; + } + + res = onestat; + switch(chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + res |= (onestat >> (chip_mode * 32)); +#endif + case 4: + res |= (onestat >> (chip_mode * 16)); + case 2: + res |= (onestat >> (chip_mode * 8)); + case 1: + ; + } + + /* Last, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + case 1: + break; + case 2: + res = cfi16_to_cpu(map, res); + break; + case 4: + res = cfi32_to_cpu(map, res); + break; + default: BUG(); + } + return res; +} + +#define MERGESTATUS(x) cfi_merge_status((x), map, cfi) + + +/* + * Sends a CFI command to a bank of flash for the given geometry. + * + * Returns the offset in flash where the command was written. + * If prev_val is non-null, it will be set to the value at the command address, + * before the command was written. + */ +static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, + struct map_info *map, struct cfi_private *cfi, + int type, map_word *prev_val) +{ + map_word val; + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); + val = cfi_build_cmd(cmd, map, cfi); + + if (prev_val) + *prev_val = map_read(map, addr); + + map_write(map, val, addr); + + return addr - base; +} + +static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) +{ + map_word val = map_read(map, addr); + + if (map_bankwidth_is_1(map)) { + return val.x[0]; + } else if (map_bankwidth_is_2(map)) { + return cfi16_to_cpu(map, val.x[0]); + } else { + /* No point in a 64-bit byteswap since that would just be + swapping the responses from different chips, and we are + only interested in one chip (a representative sample) */ + return cfi32_to_cpu(map, val.x[0]); + } +} + +static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) +{ + map_word val = map_read(map, addr); + + if (map_bankwidth_is_1(map)) { + return val.x[0] & 0xff; + } else if (map_bankwidth_is_2(map)) { + return cfi16_to_cpu(map, val.x[0]); + } else { + /* No point in a 64-bit byteswap since that would just be + swapping the responses from different chips, and we are + only interested in one chip (a representative sample) */ + return cfi32_to_cpu(map, val.x[0]); + } +} + +static inline void cfi_udelay(int us) +{ + if (us >= 1000) { + msleep((us+999)/1000); + } else { + udelay(us); + cond_resched(); + } +} + +int __xipram cfi_qry_present(struct map_info *map, __u32 base, + struct cfi_private *cfi); +int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map, + struct cfi_private *cfi); +void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, + struct cfi_private *cfi); + +struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size, + const char* name); +struct cfi_fixup { + uint16_t mfr; + uint16_t id; + void (*fixup)(struct mtd_info *mtd); +}; + +#define CFI_MFR_ANY 0xFFFF +#define CFI_ID_ANY 0xFFFF +#define CFI_MFR_CONTINUATION 0x007F + +#define CFI_MFR_AMD 0x0001 +#define CFI_MFR_AMIC 0x0037 +#define CFI_MFR_ATMEL 0x001F +#define CFI_MFR_EON 0x001C +#define CFI_MFR_FUJITSU 0x0004 +#define CFI_MFR_HYUNDAI 0x00AD +#define CFI_MFR_INTEL 0x0089 +#define CFI_MFR_MACRONIX 0x00C2 +#define CFI_MFR_NEC 0x0010 +#define CFI_MFR_PMC 0x009D +#define CFI_MFR_SAMSUNG 0x00EC +#define CFI_MFR_SHARP 0x00B0 +#define CFI_MFR_SST 0x00BF +#define CFI_MFR_ST 0x0020 /* STMicroelectronics */ +#define CFI_MFR_TOSHIBA 0x0098 +#define CFI_MFR_WINBOND 0x00DA + +void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups); + +typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk); + +int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, + loff_t ofs, size_t len, void *thunk); + + +#endif /* __MTD_CFI_H__ */ diff --git a/kernel/include/linux/mtd/cfi_endian.h b/kernel/include/linux/mtd/cfi_endian.h new file mode 100644 index 000000000..b97a62507 --- /dev/null +++ b/kernel/include/linux/mtd/cfi_endian.h @@ -0,0 +1,53 @@ +/* + * Copyright © 2001-2010 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include + +#define CFI_HOST_ENDIAN 1 +#define CFI_LITTLE_ENDIAN 2 +#define CFI_BIG_ENDIAN 3 + +#if !defined(CONFIG_MTD_CFI_ADV_OPTIONS) || defined(CONFIG_MTD_CFI_NOSWAP) +#define CFI_DEFAULT_ENDIAN CFI_HOST_ENDIAN +#elif defined(CONFIG_MTD_CFI_LE_BYTE_SWAP) +#define CFI_DEFAULT_ENDIAN CFI_LITTLE_ENDIAN +#elif defined(CONFIG_MTD_CFI_BE_BYTE_SWAP) +#define CFI_DEFAULT_ENDIAN CFI_BIG_ENDIAN +#else +#error No CFI endianness defined +#endif + +#define cfi_default(s) ((s)?:CFI_DEFAULT_ENDIAN) +#define cfi_be(s) (cfi_default(s) == CFI_BIG_ENDIAN) +#define cfi_le(s) (cfi_default(s) == CFI_LITTLE_ENDIAN) +#define cfi_host(s) (cfi_default(s) == CFI_HOST_ENDIAN) + +#define cpu_to_cfi8(map, x) (x) +#define cfi8_to_cpu(map, x) (x) +#define cpu_to_cfi16(map, x) _cpu_to_cfi(16, (map)->swap, (x)) +#define cpu_to_cfi32(map, x) _cpu_to_cfi(32, (map)->swap, (x)) +#define cpu_to_cfi64(map, x) _cpu_to_cfi(64, (map)->swap, (x)) +#define cfi16_to_cpu(map, x) _cfi_to_cpu(16, (map)->swap, (x)) +#define cfi32_to_cpu(map, x) _cfi_to_cpu(32, (map)->swap, (x)) +#define cfi64_to_cpu(map, x) _cfi_to_cpu(64, (map)->swap, (x)) + +#define _cpu_to_cfi(w, s, x) (cfi_host(s)?(x):_swap_to_cfi(w, s, x)) +#define _cfi_to_cpu(w, s, x) (cfi_host(s)?(x):_swap_to_cpu(w, s, x)) +#define _swap_to_cfi(w, s, x) (cfi_be(s)?cpu_to_be##w(x):cpu_to_le##w(x)) +#define _swap_to_cpu(w, s, x) (cfi_be(s)?be##w##_to_cpu(x):le##w##_to_cpu(x)) diff --git a/kernel/include/linux/mtd/concat.h b/kernel/include/linux/mtd/concat.h new file mode 100644 index 000000000..ccdbe93a9 --- /dev/null +++ b/kernel/include/linux/mtd/concat.h @@ -0,0 +1,34 @@ +/* + * MTD device concatenation layer definitions + * + * Copyright © 2002 Robert Kaiser + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef MTD_CONCAT_H +#define MTD_CONCAT_H + + +struct mtd_info *mtd_concat_create( + struct mtd_info *subdev[], /* subdevices to concatenate */ + int num_devs, /* number of subdevices */ + const char *name); /* name for the new device */ + +void mtd_concat_destroy(struct mtd_info *mtd); + +#endif + diff --git a/kernel/include/linux/mtd/doc2000.h b/kernel/include/linux/mtd/doc2000.h new file mode 100644 index 000000000..407d1e556 --- /dev/null +++ b/kernel/include/linux/mtd/doc2000.h @@ -0,0 +1,220 @@ +/* + * Linux driver for Disk-On-Chip devices + * + * Copyright © 1999 Machine Vision Holdings, Inc. + * Copyright © 1999-2010 David Woodhouse + * Copyright © 2002-2003 Greg Ungerer + * Copyright © 2002-2003 SnapGear Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_DOC2000_H__ +#define __MTD_DOC2000_H__ + +#include +#include + +#define DoC_Sig1 0 +#define DoC_Sig2 1 + +#define DoC_ChipID 0x1000 +#define DoC_DOCStatus 0x1001 +#define DoC_DOCControl 0x1002 +#define DoC_FloorSelect 0x1003 +#define DoC_CDSNControl 0x1004 +#define DoC_CDSNDeviceSelect 0x1005 +#define DoC_ECCConf 0x1006 +#define DoC_2k_ECCStatus 0x1007 + +#define DoC_CDSNSlowIO 0x100d +#define DoC_ECCSyndrome0 0x1010 +#define DoC_ECCSyndrome1 0x1011 +#define DoC_ECCSyndrome2 0x1012 +#define DoC_ECCSyndrome3 0x1013 +#define DoC_ECCSyndrome4 0x1014 +#define DoC_ECCSyndrome5 0x1015 +#define DoC_AliasResolution 0x101b +#define DoC_ConfigInput 0x101c +#define DoC_ReadPipeInit 0x101d +#define DoC_WritePipeTerm 0x101e +#define DoC_LastDataRead 0x101f +#define DoC_NOP 0x1020 + +#define DoC_Mil_CDSN_IO 0x0800 +#define DoC_2k_CDSN_IO 0x1800 + +#define DoC_Mplus_NOP 0x1002 +#define DoC_Mplus_AliasResolution 0x1004 +#define DoC_Mplus_DOCControl 0x1006 +#define DoC_Mplus_AccessStatus 0x1008 +#define DoC_Mplus_DeviceSelect 0x1008 +#define DoC_Mplus_Configuration 0x100a +#define DoC_Mplus_OutputControl 0x100c +#define DoC_Mplus_FlashControl 0x1020 +#define DoC_Mplus_FlashSelect 0x1022 +#define DoC_Mplus_FlashCmd 0x1024 +#define DoC_Mplus_FlashAddress 0x1026 +#define DoC_Mplus_FlashData0 0x1028 +#define DoC_Mplus_FlashData1 0x1029 +#define DoC_Mplus_ReadPipeInit 0x102a +#define DoC_Mplus_LastDataRead 0x102c +#define DoC_Mplus_LastDataRead1 0x102d +#define DoC_Mplus_WritePipeTerm 0x102e +#define DoC_Mplus_ECCSyndrome0 0x1040 +#define DoC_Mplus_ECCSyndrome1 0x1041 +#define DoC_Mplus_ECCSyndrome2 0x1042 +#define DoC_Mplus_ECCSyndrome3 0x1043 +#define DoC_Mplus_ECCSyndrome4 0x1044 +#define DoC_Mplus_ECCSyndrome5 0x1045 +#define DoC_Mplus_ECCConf 0x1046 +#define DoC_Mplus_Toggle 0x1046 +#define DoC_Mplus_DownloadStatus 0x1074 +#define DoC_Mplus_CtrlConfirm 0x1076 +#define DoC_Mplus_Power 0x1fff + +/* How to access the device? + * On ARM, it'll be mmap'd directly with 32-bit wide accesses. + * On PPC, it's mmap'd and 16-bit wide. + * Others use readb/writeb + */ +#if defined(__arm__) +static inline u8 ReadDOC_(u32 __iomem *addr, unsigned long reg) +{ + return __raw_readl(addr + reg); +} +static inline void WriteDOC_(u8 data, u32 __iomem *addr, unsigned long reg) +{ + __raw_writel(data, addr + reg); + wmb(); +} +#define DOC_IOREMAP_LEN 0x8000 +#elif defined(__ppc__) +static inline u8 ReadDOC_(u16 __iomem *addr, unsigned long reg) +{ + return __raw_readw(addr + reg); +} +static inline void WriteDOC_(u8 data, u16 __iomem *addr, unsigned long reg) +{ + __raw_writew(data, addr + reg); + wmb(); +} +#define DOC_IOREMAP_LEN 0x4000 +#else +#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg)) +#define WriteDOC_(d, adr, reg) writeb(d, (void __iomem *)(adr) + (reg)) +#define DOC_IOREMAP_LEN 0x2000 + +#endif + +#if defined(__i386__) || defined(__x86_64__) +#define USE_MEMCPY +#endif + +/* These are provided to directly use the DoC_xxx defines */ +#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg) +#define WriteDOC(d, adr, reg) WriteDOC_(d,adr,DoC_##reg) + +#define DOC_MODE_RESET 0 +#define DOC_MODE_NORMAL 1 +#define DOC_MODE_RESERVED1 2 +#define DOC_MODE_RESERVED2 3 + +#define DOC_MODE_CLR_ERR 0x80 +#define DOC_MODE_RST_LAT 0x10 +#define DOC_MODE_BDECT 0x08 +#define DOC_MODE_MDWREN 0x04 + +#define DOC_ChipID_Doc2k 0x20 +#define DOC_ChipID_Doc2kTSOP 0x21 /* internal number for MTD */ +#define DOC_ChipID_DocMil 0x30 +#define DOC_ChipID_DocMilPlus32 0x40 +#define DOC_ChipID_DocMilPlus16 0x41 + +#define CDSN_CTRL_FR_B 0x80 +#define CDSN_CTRL_FR_B0 0x40 +#define CDSN_CTRL_FR_B1 0x80 + +#define CDSN_CTRL_ECC_IO 0x20 +#define CDSN_CTRL_FLASH_IO 0x10 +#define CDSN_CTRL_WP 0x08 +#define CDSN_CTRL_ALE 0x04 +#define CDSN_CTRL_CLE 0x02 +#define CDSN_CTRL_CE 0x01 + +#define DOC_ECC_RESET 0 +#define DOC_ECC_ERROR 0x80 +#define DOC_ECC_RW 0x20 +#define DOC_ECC__EN 0x08 +#define DOC_TOGGLE_BIT 0x04 +#define DOC_ECC_RESV 0x02 +#define DOC_ECC_IGNORE 0x01 + +#define DOC_FLASH_CE 0x80 +#define DOC_FLASH_WP 0x40 +#define DOC_FLASH_BANK 0x02 + +/* We have to also set the reserved bit 1 for enable */ +#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV) +#define DOC_ECC_DIS (DOC_ECC_RESV) + +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + +#define MAX_FLOORS 4 +#define MAX_CHIPS 4 + +#define MAX_FLOORS_MIL 1 +#define MAX_CHIPS_MIL 1 + +#define MAX_FLOORS_MPLUS 2 +#define MAX_CHIPS_MPLUS 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +struct DiskOnChip { + unsigned long physadr; + void __iomem *virtadr; + unsigned long totlen; + unsigned char ChipID; /* Type of DiskOnChip */ + int ioreg; + + unsigned long mfr; /* Flash IDs - only one type of flash per device */ + unsigned long id; + int chipshift; + char page256; + char pageadrlen; + char interleave; /* Internal interleaving - Millennium Plus style */ + unsigned long erasesize; + + int curfloor; + int curchip; + + int numchips; + struct Nand *chips; + struct mtd_info *nextdoc; + struct mutex lock; +}; + +int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]); + +#endif /* __MTD_DOC2000_H__ */ diff --git a/kernel/include/linux/mtd/flashchip.h b/kernel/include/linux/mtd/flashchip.h new file mode 100644 index 000000000..b63fa457f --- /dev/null +++ b/kernel/include/linux/mtd/flashchip.h @@ -0,0 +1,112 @@ +/* + * Copyright © 2000 Red Hat UK Limited + * Copyright © 2000-2010 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_FLASHCHIP_H__ +#define __MTD_FLASHCHIP_H__ + +/* For spinlocks. sched.h includes spinlock.h from whichever directory it + * happens to be in - so we don't have to care whether we're on 2.2, which + * has asm/spinlock.h, or 2.4, which has linux/spinlock.h + */ +#include +#include + +typedef enum { + FL_READY, + FL_STATUS, + FL_CFI_QUERY, + FL_JEDEC_QUERY, + FL_ERASING, + FL_ERASE_SUSPENDING, + FL_ERASE_SUSPENDED, + FL_WRITING, + FL_WRITING_TO_BUFFER, + FL_OTP_WRITE, + FL_WRITE_SUSPENDING, + FL_WRITE_SUSPENDED, + FL_PM_SUSPENDED, + FL_SYNCING, + FL_UNLOADING, + FL_LOCKING, + FL_UNLOCKING, + FL_POINT, + FL_XIP_WHILE_ERASING, + FL_XIP_WHILE_WRITING, + FL_SHUTDOWN, + /* These 2 come from nand_state_t, which has been unified here */ + FL_READING, + FL_CACHEDPRG, + /* These 4 come from onenand_state_t, which has been unified here */ + FL_RESETING, + FL_OTPING, + FL_PREPARING_ERASE, + FL_VERIFYING_ERASE, + + FL_UNKNOWN +} flstate_t; + + + +/* NOTE: confusingly, this can be used to refer to more than one chip at a time, + if they're interleaved. This can even refer to individual partitions on + the same physical chip when present. */ + +struct flchip { + unsigned long start; /* Offset within the map */ + // unsigned long len; + /* We omit len for now, because when we group them together + we insist that they're all of the same size, and the chip size + is held in the next level up. If we get more versatile later, + it'll make it a damn sight harder to find which chip we want from + a given offset, and we'll want to add the per-chip length field + back in. + */ + int ref_point_counter; + flstate_t state; + flstate_t oldstate; + + unsigned int write_suspended:1; + unsigned int erase_suspended:1; + unsigned long in_progress_block_addr; + + struct mutex mutex; + wait_queue_head_t wq; /* Wait on here when we're waiting for the chip + to be ready */ + int word_write_time; + int buffer_write_time; + int erase_time; + + int word_write_time_max; + int buffer_write_time_max; + int erase_time_max; + + void *priv; +}; + +/* This is used to handle contention on write/erase operations + between partitions of the same physical chip. */ +struct flchip_shared { + struct mutex lock; + struct flchip *writing; + struct flchip *erasing; +}; + + +#endif /* __MTD_FLASHCHIP_H__ */ diff --git a/kernel/include/linux/mtd/fsmc.h b/kernel/include/linux/mtd/fsmc.h new file mode 100644 index 000000000..c8be32e9f --- /dev/null +++ b/kernel/include/linux/mtd/fsmc.h @@ -0,0 +1,174 @@ +/* + * incude/mtd/fsmc.h + * + * ST Microelectronics + * Flexible Static Memory Controller (FSMC) + * platform data interface and header file + * + * Copyright © 2010 ST Microelectronics + * Vipin Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_FSMC_H +#define __MTD_FSMC_H + +#include +#include +#include +#include +#include +#include + +#define FSMC_NAND_BW8 1 +#define FSMC_NAND_BW16 2 + +#define FSMC_MAX_NOR_BANKS 4 +#define FSMC_MAX_NAND_BANKS 4 + +#define FSMC_FLASH_WIDTH8 1 +#define FSMC_FLASH_WIDTH16 2 + +/* fsmc controller registers for NOR flash */ +#define CTRL 0x0 + /* ctrl register definitions */ + #define BANK_ENABLE (1 << 0) + #define MUXED (1 << 1) + #define NOR_DEV (2 << 2) + #define WIDTH_8 (0 << 4) + #define WIDTH_16 (1 << 4) + #define RSTPWRDWN (1 << 6) + #define WPROT (1 << 7) + #define WRT_ENABLE (1 << 12) + #define WAIT_ENB (1 << 13) + +#define CTRL_TIM 0x4 + /* ctrl_tim register definitions */ + +#define FSMC_NOR_BANK_SZ 0x8 +#define FSMC_NOR_REG_SIZE 0x40 + +#define FSMC_NOR_REG(base, bank, reg) (base + \ + FSMC_NOR_BANK_SZ * (bank) + \ + reg) + +/* fsmc controller registers for NAND flash */ +#define PC 0x00 + /* pc register definitions */ + #define FSMC_RESET (1 << 0) + #define FSMC_WAITON (1 << 1) + #define FSMC_ENABLE (1 << 2) + #define FSMC_DEVTYPE_NAND (1 << 3) + #define FSMC_DEVWID_8 (0 << 4) + #define FSMC_DEVWID_16 (1 << 4) + #define FSMC_ECCEN (1 << 6) + #define FSMC_ECCPLEN_512 (0 << 7) + #define FSMC_ECCPLEN_256 (1 << 7) + #define FSMC_TCLR_1 (1) + #define FSMC_TCLR_SHIFT (9) + #define FSMC_TCLR_MASK (0xF) + #define FSMC_TAR_1 (1) + #define FSMC_TAR_SHIFT (13) + #define FSMC_TAR_MASK (0xF) +#define STS 0x04 + /* sts register definitions */ + #define FSMC_CODE_RDY (1 << 15) +#define COMM 0x08 + /* comm register definitions */ + #define FSMC_TSET_0 0 + #define FSMC_TSET_SHIFT 0 + #define FSMC_TSET_MASK 0xFF + #define FSMC_TWAIT_6 6 + #define FSMC_TWAIT_SHIFT 8 + #define FSMC_TWAIT_MASK 0xFF + #define FSMC_THOLD_4 4 + #define FSMC_THOLD_SHIFT 16 + #define FSMC_THOLD_MASK 0xFF + #define FSMC_THIZ_1 1 + #define FSMC_THIZ_SHIFT 24 + #define FSMC_THIZ_MASK 0xFF +#define ATTRIB 0x0C +#define IOATA 0x10 +#define ECC1 0x14 +#define ECC2 0x18 +#define ECC3 0x1C +#define FSMC_NAND_BANK_SZ 0x20 + +#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \ + (FSMC_NAND_BANK_SZ * (bank)) + \ + reg) + +#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) + +/* + * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 + * and it has to be read consecutively and immediately after the 512 + * byte data block for hardware to generate the error bit offsets + * Managing the ecc bytes in the following way is easier. This way is + * similar to oobfree structure maintained already in u-boot nand driver + */ +#define MAX_ECCPLACE_ENTRIES 32 + +struct fsmc_nand_eccplace { + uint8_t offset; + uint8_t length; +}; + +struct fsmc_eccplace { + struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; +}; + +struct fsmc_nand_timings { + uint8_t tclr; + uint8_t tar; + uint8_t thiz; + uint8_t thold; + uint8_t twait; + uint8_t tset; +}; + +enum access_mode { + USE_DMA_ACCESS = 1, + USE_WORD_ACCESS, +}; + +/** + * fsmc_nand_platform_data - platform specific NAND controller config + * @nand_timings: timing setup for the physical NAND interface + * @partitions: partition table for the platform, use a default fallback + * if this is NULL + * @nr_partitions: the number of partitions in the previous entry + * @options: different options for the driver + * @width: bus width + * @bank: default bank + * @select_bank: callback to select a certain bank, this is + * platform-specific. If the controller only supports one bank + * this may be set to NULL + */ +struct fsmc_nand_platform_data { + struct fsmc_nand_timings *nand_timings; + struct mtd_partition *partitions; + unsigned int nr_partitions; + unsigned int options; + unsigned int width; + unsigned int bank; + + enum access_mode mode; + + void (*select_bank)(uint32_t bank, uint32_t busw); + + /* priv structures for dma accesses */ + void *read_dma_priv; + void *write_dma_priv; +}; + +extern int __init fsmc_nor_init(struct platform_device *pdev, + unsigned long base, uint32_t bank, uint32_t width); +extern void __init fsmc_init_board_info(struct platform_device *pdev, + struct mtd_partition *partitions, unsigned int nr_partitions, + unsigned int width); + +#endif /* __MTD_FSMC_H */ diff --git a/kernel/include/linux/mtd/ftl.h b/kernel/include/linux/mtd/ftl.h new file mode 100644 index 000000000..0555f7a0b --- /dev/null +++ b/kernel/include/linux/mtd/ftl.h @@ -0,0 +1,74 @@ +/* + * Derived from (and probably identical to): + * ftl.h 1.7 1999/10/25 20:23:17 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_FTL_H +#define _LINUX_FTL_H + +typedef struct erase_unit_header_t { + uint8_t LinkTargetTuple[5]; + uint8_t DataOrgTuple[10]; + uint8_t NumTransferUnits; + uint32_t EraseCount; + uint16_t LogicalEUN; + uint8_t BlockSize; + uint8_t EraseUnitSize; + uint16_t FirstPhysicalEUN; + uint16_t NumEraseUnits; + uint32_t FormattedSize; + uint32_t FirstVMAddress; + uint16_t NumVMPages; + uint8_t Flags; + uint8_t Code; + uint32_t SerialNumber; + uint32_t AltEUHOffset; + uint32_t BAMOffset; + uint8_t Reserved[12]; + uint8_t EndTuple[2]; +} erase_unit_header_t; + +/* Flags in erase_unit_header_t */ +#define HIDDEN_AREA 0x01 +#define REVERSE_POLARITY 0x02 +#define DOUBLE_BAI 0x04 + +/* Definitions for block allocation information */ + +#define BLOCK_FREE(b) ((b) == 0xffffffff) +#define BLOCK_DELETED(b) (((b) == 0) || ((b) == 0xfffffffe)) + +#define BLOCK_TYPE(b) ((b) & 0x7f) +#define BLOCK_ADDRESS(b) ((b) & ~0x7f) +#define BLOCK_NUMBER(b) ((b) >> 9) +#define BLOCK_CONTROL 0x30 +#define BLOCK_DATA 0x40 +#define BLOCK_REPLACEMENT 0x60 +#define BLOCK_BAD 0x70 + +#endif /* _LINUX_FTL_H */ diff --git a/kernel/include/linux/mtd/gen_probe.h b/kernel/include/linux/mtd/gen_probe.h new file mode 100644 index 000000000..2c456054f --- /dev/null +++ b/kernel/include/linux/mtd/gen_probe.h @@ -0,0 +1,37 @@ +/* + * Copyright © 2001 Red Hat UK Limited + * Copyright © 2001-2010 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __LINUX_MTD_GEN_PROBE_H__ +#define __LINUX_MTD_GEN_PROBE_H__ + +#include +#include +#include +#include + +struct chip_probe { + char *name; + int (*probe_chip)(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi); +}; + +struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp); + +#endif /* __LINUX_MTD_GEN_PROBE_H__ */ diff --git a/kernel/include/linux/mtd/inftl.h b/kernel/include/linux/mtd/inftl.h new file mode 100644 index 000000000..02cd5f9b7 --- /dev/null +++ b/kernel/include/linux/mtd/inftl.h @@ -0,0 +1,63 @@ +/* + * inftl.h -- defines to support the Inverse NAND Flash Translation Layer + * + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + */ + +#ifndef __MTD_INFTL_H__ +#define __MTD_INFTL_H__ + +#ifndef __KERNEL__ +#error This is a kernel header. Perhaps include nftl-user.h instead? +#endif + +#include +#include +#include + +#include + +#ifndef INFTL_MAJOR +#define INFTL_MAJOR 96 +#endif +#define INFTL_PARTN_BITS 4 + +#ifdef __KERNEL__ + +struct INFTLrecord { + struct mtd_blktrans_dev mbd; + __u16 MediaUnit; + __u32 EraseSize; + struct INFTLMediaHeader MediaHdr; + int usecount; + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + __u16 numvunits; + __u16 firstEUN; + __u16 lastEUN; + __u16 numfreeEUNs; + __u16 LastFreeEUN; /* To speed up finding a free EUN */ + int head,sect,cyl; + __u16 *PUtable; /* Physical Unit Table */ + __u16 *VUtable; /* Virtual Unit Table */ + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; + struct nand_ecclayout oobinfo; +}; + +int INFTL_mount(struct INFTLrecord *s); +int INFTL_formatblock(struct INFTLrecord *s, int block); + +void INFTL_dumptables(struct INFTLrecord *s); +void INFTL_dumpVUchains(struct INFTLrecord *s); + +int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + +#endif /* __KERNEL__ */ + +#endif /* __MTD_INFTL_H__ */ diff --git a/kernel/include/linux/mtd/latch-addr-flash.h b/kernel/include/linux/mtd/latch-addr-flash.h new file mode 100644 index 000000000..e94b8e128 --- /dev/null +++ b/kernel/include/linux/mtd/latch-addr-flash.h @@ -0,0 +1,29 @@ +/* + * Interface for NOR flash driver whose high address lines are latched + * + * Copyright © 2008 MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __LATCH_ADDR_FLASH__ +#define __LATCH_ADDR_FLASH__ + +struct map_info; +struct mtd_partition; + +struct latch_addr_flash_data { + unsigned int width; + unsigned int size; + + int (*init)(void *data, int cs); + void (*done)(void *data); + void (*set_window)(unsigned long offset, void *data); + void *data; + + unsigned int nr_parts; + struct mtd_partition *parts; +}; + +#endif diff --git a/kernel/include/linux/mtd/lpc32xx_mlc.h b/kernel/include/linux/mtd/lpc32xx_mlc.h new file mode 100644 index 000000000..d91b1e356 --- /dev/null +++ b/kernel/include/linux/mtd/lpc32xx_mlc.h @@ -0,0 +1,20 @@ +/* + * Platform data for LPC32xx SoC MLC NAND controller + * + * Copyright © 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_LPC32XX_MLC_H +#define __LINUX_MTD_LPC32XX_MLC_H + +#include + +struct lpc32xx_mlc_platform_data { + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +#endif /* __LINUX_MTD_LPC32XX_MLC_H */ diff --git a/kernel/include/linux/mtd/lpc32xx_slc.h b/kernel/include/linux/mtd/lpc32xx_slc.h new file mode 100644 index 000000000..1169548a1 --- /dev/null +++ b/kernel/include/linux/mtd/lpc32xx_slc.h @@ -0,0 +1,20 @@ +/* + * Platform data for LPC32xx SoC SLC NAND controller + * + * Copyright © 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_LPC32XX_SLC_H +#define __LINUX_MTD_LPC32XX_SLC_H + +#include + +struct lpc32xx_slc_platform_data { + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +#endif /* __LINUX_MTD_LPC32XX_SLC_H */ diff --git a/kernel/include/linux/mtd/map.h b/kernel/include/linux/mtd/map.h new file mode 100644 index 000000000..29975c73a --- /dev/null +++ b/kernel/include/linux/mtd/map.h @@ -0,0 +1,486 @@ +/* + * Copyright © 2000-2010 David Woodhouse et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +/* Overhauled routines for dealing with different mmap regions of flash */ + +#ifndef __LINUX_MTD_MAP_H__ +#define __LINUX_MTD_MAP_H__ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 +#define map_bankwidth(map) 1 +#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1) +#define map_bankwidth_is_large(map) (0) +#define map_words(map) (1) +#define MAX_MAP_BANKWIDTH 1 +#else +#define map_bankwidth_is_1(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# else +# define map_bankwidth(map) 2 +# define map_bankwidth_is_large(map) (0) +# define map_words(map) (1) +# endif +#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 2 +#else +#define map_bankwidth_is_2(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# else +# define map_bankwidth(map) 4 +# define map_bankwidth_is_large(map) (0) +# define map_words(map) (1) +# endif +#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 4 +#else +#define map_bankwidth_is_4(map) (0) +#endif + +/* ensure we never evaluate anything shorted than an unsigned long + * to zero, and ensure we'll never miss the end of an comparison (bjd) */ + +#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1)) / sizeof(unsigned long)) + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# if BITS_PER_LONG < 64 +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# endif +# else +# define map_bankwidth(map) 8 +# define map_bankwidth_is_large(map) (BITS_PER_LONG < 64) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 8 +#else +#define map_bankwidth_is_8(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# else +# define map_bankwidth(map) 16 +# define map_bankwidth_is_large(map) (1) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 16 +#else +#define map_bankwidth_is_16(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# else +# define map_bankwidth(map) 32 +# define map_bankwidth_is_large(map) (1) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 32 +#else +#define map_bankwidth_is_32(map) (0) +#endif + +#ifndef map_bankwidth +#warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" +static inline int map_bankwidth(void *map) +{ + BUG(); + return 0; +} +#define map_bankwidth_is_large(map) (0) +#define map_words(map) (0) +#define MAX_MAP_BANKWIDTH 1 +#endif + +static inline int map_bankwidth_supported(int w) +{ + switch (w) { +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 + case 1: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2 + case 2: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4 + case 4: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8 + case 8: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16 + case 16: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32 + case 32: +#endif + return 1; + + default: + return 0; + } +} + +#define MAX_MAP_LONGS (((MAX_MAP_BANKWIDTH * 8) + BITS_PER_LONG - 1) / BITS_PER_LONG) + +typedef union { + unsigned long x[MAX_MAP_LONGS]; +} map_word; + +/* The map stuff is very simple. You fill in your struct map_info with + a handful of routines for accessing the device, making sure they handle + paging etc. correctly if your device needs it. Then you pass it off + to a chip probe routine -- either JEDEC or CFI probe or both -- via + do_map_probe(). If a chip is recognised, the probe code will invoke the + appropriate chip driver (if present) and return a struct mtd_info. + At which point, you fill in the mtd->module with your own module + address, and register it with the MTD core code. Or you could partition + it and register the partitions instead, or keep it for your own private + use; whatever. + + The mtd->priv field will point to the struct map_info, and any further + private data required by the chip driver is linked from the + mtd->priv->fldrv_priv field. This allows the map driver to get at + the destructor function map->fldrv_destroy() when it's tired + of living. +*/ + +struct map_info { + const char *name; + unsigned long size; + resource_size_t phys; +#define NO_XIP (-1UL) + + void __iomem *virt; + void *cached; + + int swap; /* this mapping's byte-swapping requirement */ + int bankwidth; /* in octets. This isn't necessarily the width + of actual bus cycles -- it's the repeat interval + in bytes, before you are talking to the first chip again. + */ + +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS + map_word (*read)(struct map_info *, unsigned long); + void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t); + + void (*write)(struct map_info *, const map_word, unsigned long); + void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t); + + /* We can perhaps put in 'point' and 'unpoint' methods, if we really + want to enable XIP for non-linear mappings. Not yet though. */ +#endif + /* It's possible for the map driver to use cached memory in its + copy_from implementation (and _only_ with copy_from). However, + when the chip driver knows some flash area has changed contents, + it will signal it to the map driver through this routine to let + the map driver invalidate the corresponding cache as needed. + If there is no cache to care about this can be set to NULL. */ + void (*inval_cache)(struct map_info *, unsigned long, ssize_t); + + /* set_vpp() must handle being reentered -- enable, enable, disable + must leave it enabled. */ + void (*set_vpp)(struct map_info *, int); + + unsigned long pfow_base; + unsigned long map_priv_1; + unsigned long map_priv_2; + struct device_node *device_node; + void *fldrv_priv; + struct mtd_chip_driver *fldrv; +}; + +struct mtd_chip_driver { + struct mtd_info *(*probe)(struct map_info *map); + void (*destroy)(struct mtd_info *); + struct module *module; + char *name; + struct list_head list; +}; + +void register_mtd_chip_driver(struct mtd_chip_driver *); +void unregister_mtd_chip_driver(struct mtd_chip_driver *); + +struct mtd_info *do_map_probe(const char *name, struct map_info *map); +void map_destroy(struct mtd_info *mtd); + +#define ENABLE_VPP(map) do { if (map->set_vpp) map->set_vpp(map, 1); } while (0) +#define DISABLE_VPP(map) do { if (map->set_vpp) map->set_vpp(map, 0); } while (0) + +#define INVALIDATE_CACHED_RANGE(map, from, size) \ + do { if (map->inval_cache) map->inval_cache(map, from, size); } while (0) + + +static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2) +{ + int i; + + for (i = 0; i < map_words(map); i++) { + if (val1.x[i] != val2.x[i]) + return 0; + } + + return 1; +} + +static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2) +{ + map_word r; + int i; + + for (i = 0; i < map_words(map); i++) + r.x[i] = val1.x[i] & val2.x[i]; + + return r; +} + +static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2) +{ + map_word r; + int i; + + for (i = 0; i < map_words(map); i++) + r.x[i] = val1.x[i] & ~val2.x[i]; + + return r; +} + +static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2) +{ + map_word r; + int i; + + for (i = 0; i < map_words(map); i++) + r.x[i] = val1.x[i] | val2.x[i]; + + return r; +} + +static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3) +{ + int i; + + for (i = 0; i < map_words(map); i++) { + if ((val1.x[i] & val2.x[i]) != val3.x[i]) + return 0; + } + + return 1; +} + +static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2) +{ + int i; + + for (i = 0; i < map_words(map); i++) { + if (val1.x[i] & val2.x[i]) + return 1; + } + + return 0; +} + +static inline map_word map_word_load(struct map_info *map, const void *ptr) +{ + map_word r; + + if (map_bankwidth_is_1(map)) + r.x[0] = *(unsigned char *)ptr; + else if (map_bankwidth_is_2(map)) + r.x[0] = get_unaligned((uint16_t *)ptr); + else if (map_bankwidth_is_4(map)) + r.x[0] = get_unaligned((uint32_t *)ptr); +#if BITS_PER_LONG >= 64 + else if (map_bankwidth_is_8(map)) + r.x[0] = get_unaligned((uint64_t *)ptr); +#endif + else if (map_bankwidth_is_large(map)) + memcpy(r.x, ptr, map->bankwidth); + else + BUG(); + + return r; +} + +static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len) +{ + int i; + + if (map_bankwidth_is_large(map)) { + char *dest = (char *)&orig; + + memcpy(dest+start, buf, len); + } else { + for (i = start; i < start+len; i++) { + int bitpos; + +#ifdef __LITTLE_ENDIAN + bitpos = i * 8; +#else /* __BIG_ENDIAN */ + bitpos = (map_bankwidth(map) - 1 - i) * 8; +#endif + orig.x[0] &= ~(0xff << bitpos); + orig.x[0] |= (unsigned long)buf[i-start] << bitpos; + } + } + return orig; +} + +#if BITS_PER_LONG < 64 +#define MAP_FF_LIMIT 4 +#else +#define MAP_FF_LIMIT 8 +#endif + +static inline map_word map_word_ff(struct map_info *map) +{ + map_word r; + int i; + + if (map_bankwidth(map) < MAP_FF_LIMIT) { + int bw = 8 * map_bankwidth(map); + + r.x[0] = (1UL << bw) - 1; + } else { + for (i = 0; i < map_words(map); i++) + r.x[i] = ~0UL; + } + return r; +} + +static inline map_word inline_map_read(struct map_info *map, unsigned long ofs) +{ + map_word r; + + if (map_bankwidth_is_1(map)) + r.x[0] = __raw_readb(map->virt + ofs); + else if (map_bankwidth_is_2(map)) + r.x[0] = __raw_readw(map->virt + ofs); + else if (map_bankwidth_is_4(map)) + r.x[0] = __raw_readl(map->virt + ofs); +#if BITS_PER_LONG >= 64 + else if (map_bankwidth_is_8(map)) + r.x[0] = __raw_readq(map->virt + ofs); +#endif + else if (map_bankwidth_is_large(map)) + memcpy_fromio(r.x, map->virt + ofs, map->bankwidth); + else + BUG(); + + return r; +} + +static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs) +{ + if (map_bankwidth_is_1(map)) + __raw_writeb(datum.x[0], map->virt + ofs); + else if (map_bankwidth_is_2(map)) + __raw_writew(datum.x[0], map->virt + ofs); + else if (map_bankwidth_is_4(map)) + __raw_writel(datum.x[0], map->virt + ofs); +#if BITS_PER_LONG >= 64 + else if (map_bankwidth_is_8(map)) + __raw_writeq(datum.x[0], map->virt + ofs); +#endif + else if (map_bankwidth_is_large(map)) + memcpy_toio(map->virt+ofs, datum.x, map->bankwidth); + else + BUG(); + mb(); +} + +static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + if (map->cached) + memcpy(to, (char *)map->cached + from, len); + else + memcpy_fromio(to, map->virt + from, len); +} + +static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + memcpy_toio(map->virt + to, from, len); +} + +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS +#define map_read(map, ofs) (map)->read(map, ofs) +#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len) +#define map_write(map, datum, ofs) (map)->write(map, datum, ofs) +#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len) + +extern void simple_map_init(struct map_info *); +#define map_is_linear(map) (map->phys != NO_XIP) + +#else +#define map_read(map, ofs) inline_map_read(map, ofs) +#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len) +#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs) +#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len) + + +#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth)) +#define map_is_linear(map) ({ (void)(map); 1; }) + +#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */ + +#endif /* __LINUX_MTD_MAP_H__ */ diff --git a/kernel/include/linux/mtd/mtd.h b/kernel/include/linux/mtd/mtd.h new file mode 100644 index 000000000..f17fa7580 --- /dev/null +++ b/kernel/include/linux/mtd/mtd.h @@ -0,0 +1,414 @@ +/* + * Copyright © 1999-2010 David Woodhouse et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_MTD_H__ +#define __MTD_MTD_H__ + +#include +#include +#include +#include + +#include + +#include + +#define MTD_ERASE_PENDING 0x01 +#define MTD_ERASING 0x02 +#define MTD_ERASE_SUSPEND 0x04 +#define MTD_ERASE_DONE 0x08 +#define MTD_ERASE_FAILED 0x10 + +#define MTD_FAIL_ADDR_UNKNOWN -1LL + +/* + * If the erase fails, fail_addr might indicate exactly which block failed. If + * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level + * or was not specific to any particular block. + */ +struct erase_info { + struct mtd_info *mtd; + uint64_t addr; + uint64_t len; + uint64_t fail_addr; + u_long time; + u_long retries; + unsigned dev; + unsigned cell; + void (*callback) (struct erase_info *self); + u_long priv; + u_char state; + struct erase_info *next; +}; + +struct mtd_erase_region_info { + uint64_t offset; /* At which this region starts, from the beginning of the MTD */ + uint32_t erasesize; /* For this region */ + uint32_t numblocks; /* Number of blocks of erasesize in this region */ + unsigned long *lockmap; /* If keeping bitmap of locks */ +}; + +/** + * struct mtd_oob_ops - oob operation operands + * @mode: operation mode + * + * @len: number of data bytes to write/read + * + * @retlen: number of data bytes written/read + * + * @ooblen: number of oob bytes to write/read + * @oobretlen: number of oob bytes written/read + * @ooboffs: offset of oob data in the oob area (only relevant when + * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) + * @datbuf: data buffer - if NULL only oob data are read/written + * @oobbuf: oob data buffer + * + * Note, it is allowed to read more than one OOB area at one go, but not write. + * The interface assumes that the OOB write requests program only one page's + * OOB area. + */ +struct mtd_oob_ops { + unsigned int mode; + size_t len; + size_t retlen; + size_t ooblen; + size_t oobretlen; + uint32_t ooboffs; + uint8_t *datbuf; + uint8_t *oobbuf; +}; + +#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 +#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 +/* + * Internal ECC layout control structure. For historical reasons, there is a + * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained + * for export to user-space via the ECCGETLAYOUT ioctl. + * nand_ecclayout should be expandable in the future simply by the above macros. + */ +struct nand_ecclayout { + __u32 eccbytes; + __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; + __u32 oobavail; + struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; +}; + +struct module; /* only needed for owner field in mtd_info */ + +struct mtd_info { + u_char type; + uint32_t flags; + uint64_t size; // Total size of the MTD + + /* "Major" erase size for the device. Naïve users may take this + * to be the only erase size available, or may use the more detailed + * information below if they desire + */ + uint32_t erasesize; + /* Minimal writable flash unit size. In case of NOR flash it is 1 (even + * though individual bits can be cleared), in case of NAND flash it is + * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR + * it is of ECC block size, etc. It is illegal to have writesize = 0. + * Any driver registering a struct mtd_info must ensure a writesize of + * 1 or larger. + */ + uint32_t writesize; + + /* + * Size of the write buffer used by the MTD. MTD devices having a write + * buffer can write multiple writesize chunks at a time. E.g. while + * writing 4 * writesize bytes to a device with 2 * writesize bytes + * buffer the MTD driver can (but doesn't have to) do 2 writesize + * operations, but not 4. Currently, all NANDs have writebufsize + * equivalent to writesize (NAND page size). Some NOR flashes do have + * writebufsize greater than writesize. + */ + uint32_t writebufsize; + + uint32_t oobsize; // Amount of OOB data per block (e.g. 16) + uint32_t oobavail; // Available OOB bytes per block + + /* + * If erasesize is a power of 2 then the shift is stored in + * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize. + */ + unsigned int erasesize_shift; + unsigned int writesize_shift; + /* Masks based on erasesize_shift and writesize_shift */ + unsigned int erasesize_mask; + unsigned int writesize_mask; + + /* + * read ops return -EUCLEAN if max number of bitflips corrected on any + * one region comprising an ecc step equals or exceeds this value. + * Settable by driver, else defaults to ecc_strength. User can override + * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed; + * see Documentation/ABI/testing/sysfs-class-mtd for more detail. + */ + unsigned int bitflip_threshold; + + // Kernel-only stuff starts here. + const char *name; + int index; + + /* ECC layout structure pointer - read only! */ + struct nand_ecclayout *ecclayout; + + /* the ecc step size. */ + unsigned int ecc_step_size; + + /* max number of correctible bit errors per ecc step */ + unsigned int ecc_strength; + + /* Data for variable erase regions. If numeraseregions is zero, + * it means that the whole device has erasesize as given above. + */ + int numeraseregions; + struct mtd_erase_region_info *eraseregions; + + /* + * Do not call via these pointers, use corresponding mtd_*() + * wrappers instead. + */ + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, + unsigned long len, + unsigned long offset, + unsigned long flags); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_read_oob) (struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops); + int (*_write_oob) (struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); + int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); + int (*_suspend) (struct mtd_info *mtd); + void (*_resume) (struct mtd_info *mtd); + void (*_reboot) (struct mtd_info *mtd); + /* + * If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. + */ + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); + + /* Backing device capabilities for this device + * - provides mmap capabilities + */ + struct backing_dev_info *backing_dev_info; + + struct notifier_block reboot_notifier; /* default mode before reboot */ + + /* ECC status information */ + struct mtd_ecc_stats ecc_stats; + /* Subpage shift (NAND) */ + int subpage_sft; + + void *priv; + + struct module *owner; + struct device dev; + int usecount; +}; + +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys); +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); + +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); + +static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + ops->retlen = ops->oobretlen = 0; + if (!mtd->_write_oob) + return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_write_oob(mtd, to, ops); +} + +int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, + struct otp_info *buf); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, + struct otp_info *buf); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); + +int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); + +static inline void mtd_sync(struct mtd_info *mtd) +{ + if (mtd->_sync) + mtd->_sync(mtd); +} + +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); + +static inline int mtd_suspend(struct mtd_info *mtd) +{ + return mtd->_suspend ? mtd->_suspend(mtd) : 0; +} + +static inline void mtd_resume(struct mtd_info *mtd) +{ + if (mtd->_resume) + mtd->_resume(mtd); +} + +static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->erasesize_shift) + return sz >> mtd->erasesize_shift; + do_div(sz, mtd->erasesize); + return sz; +} + +static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->erasesize_shift) + return sz & mtd->erasesize_mask; + return do_div(sz, mtd->erasesize); +} + +static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->writesize_shift) + return sz >> mtd->writesize_shift; + do_div(sz, mtd->writesize); + return sz; +} + +static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) +{ + if (mtd->writesize_shift) + return sz & mtd->writesize_mask; + return do_div(sz, mtd->writesize); +} + +static inline int mtd_has_oob(const struct mtd_info *mtd) +{ + return mtd->_read_oob && mtd->_write_oob; +} + +static inline int mtd_type_is_nand(const struct mtd_info *mtd) +{ + return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; +} + +static inline int mtd_can_have_bb(const struct mtd_info *mtd) +{ + return !!mtd->_block_isbad; +} + + /* Kernel-side ioctl definitions */ + +struct mtd_partition; +struct mtd_part_parser_data; + +extern int mtd_device_parse_register(struct mtd_info *mtd, + const char * const *part_probe_types, + struct mtd_part_parser_data *parser_data, + const struct mtd_partition *defparts, + int defnr_parts); +#define mtd_device_register(master, parts, nr_parts) \ + mtd_device_parse_register(master, NULL, NULL, parts, nr_parts) +extern int mtd_device_unregister(struct mtd_info *master); +extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); +extern int __get_mtd_device(struct mtd_info *mtd); +extern void __put_mtd_device(struct mtd_info *mtd); +extern struct mtd_info *get_mtd_device_nm(const char *name); +extern void put_mtd_device(struct mtd_info *mtd); + + +struct mtd_notifier { + void (*add)(struct mtd_info *mtd); + void (*remove)(struct mtd_info *mtd); + struct list_head list; +}; + + +extern void register_mtd_user (struct mtd_notifier *new); +extern int unregister_mtd_user (struct mtd_notifier *old); +void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); + +void mtd_erase_callback(struct erase_info *instr); + +static inline int mtd_is_bitflip(int err) { + return err == -EUCLEAN; +} + +static inline int mtd_is_eccerr(int err) { + return err == -EBADMSG; +} + +static inline int mtd_is_bitflip_or_eccerr(int err) { + return mtd_is_bitflip(err) || mtd_is_eccerr(err); +} + +unsigned mtd_mmap_capabilities(struct mtd_info *mtd); + +#endif /* __MTD_MTD_H__ */ diff --git a/kernel/include/linux/mtd/mtdram.h b/kernel/include/linux/mtd/mtdram.h new file mode 100644 index 000000000..628a6a21d --- /dev/null +++ b/kernel/include/linux/mtd/mtdram.h @@ -0,0 +1,8 @@ +#ifndef __MTD_MTDRAM_H__ +#define __MTD_MTDRAM_H__ + +#include +int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, + unsigned long size, const char *name); + +#endif /* __MTD_MTDRAM_H__ */ diff --git a/kernel/include/linux/mtd/nand-gpio.h b/kernel/include/linux/mtd/nand-gpio.h new file mode 100644 index 000000000..51534e50f --- /dev/null +++ b/kernel/include/linux/mtd/nand-gpio.h @@ -0,0 +1,19 @@ +#ifndef __LINUX_MTD_NAND_GPIO_H +#define __LINUX_MTD_NAND_GPIO_H + +#include + +struct gpio_nand_platdata { + int gpio_nce; + int gpio_nwp; + int gpio_cle; + int gpio_ale; + int gpio_rdy; + void (*adjust_parts)(struct gpio_nand_platdata *, size_t); + struct mtd_partition *parts; + unsigned int num_parts; + unsigned int options; + int chip_delay; +}; + +#endif diff --git a/kernel/include/linux/mtd/nand.h b/kernel/include/linux/mtd/nand.h new file mode 100644 index 000000000..3d4ea7eb2 --- /dev/null +++ b/kernel/include/linux/mtd/nand.h @@ -0,0 +1,1029 @@ +/* + * linux/include/linux/mtd/nand.h + * + * Copyright © 2000-2010 David Woodhouse + * Steven J. Hill + * Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains standard defines and IDs for NAND flash devices + * + * Changelog: + * See git changelog. + */ +#ifndef __LINUX_MTD_NAND_H +#define __LINUX_MTD_NAND_H + +#include +#include +#include +#include +#include + +struct mtd_info; +struct nand_flash_dev; +/* Scan and identify a NAND device */ +extern int nand_scan(struct mtd_info *mtd, int max_chips); +/* + * Separate phases of nand_scan(), allowing board driver to intervene + * and override command or ECC setup according to flash type. + */ +extern int nand_scan_ident(struct mtd_info *mtd, int max_chips, + struct nand_flash_dev *table); +extern int nand_scan_tail(struct mtd_info *mtd); + +/* Free resources held by the NAND device */ +extern void nand_release(struct mtd_info *mtd); + +/* Internal helper for board drivers which need to override command function */ +extern void nand_wait_ready(struct mtd_info *mtd); + +/* locks all blocks present in the device */ +extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +/* unlocks specified locked blocks */ +extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +/* The maximum number of NAND chips in an array */ +#define NAND_MAX_CHIPS 8 + +/* + * Constants for hardware specific CLE/ALE/NCE function + * + * These are bits which can be or'ed to set/clear multiple + * bits in one go. + */ +/* Select the chip by setting nCE to low */ +#define NAND_NCE 0x01 +/* Select the command latch by setting CLE to high */ +#define NAND_CLE 0x02 +/* Select the address latch by setting ALE to high */ +#define NAND_ALE 0x04 + +#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE) +#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE) +#define NAND_CTRL_CHANGE 0x80 + +/* + * Standard NAND flash commands + */ +#define NAND_CMD_READ0 0 +#define NAND_CMD_READ1 1 +#define NAND_CMD_RNDOUT 5 +#define NAND_CMD_PAGEPROG 0x10 +#define NAND_CMD_READOOB 0x50 +#define NAND_CMD_ERASE1 0x60 +#define NAND_CMD_STATUS 0x70 +#define NAND_CMD_SEQIN 0x80 +#define NAND_CMD_RNDIN 0x85 +#define NAND_CMD_READID 0x90 +#define NAND_CMD_ERASE2 0xd0 +#define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef +#define NAND_CMD_RESET 0xff + +#define NAND_CMD_LOCK 0x2a +#define NAND_CMD_UNLOCK1 0x23 +#define NAND_CMD_UNLOCK2 0x24 + +/* Extended commands for large page devices */ +#define NAND_CMD_READSTART 0x30 +#define NAND_CMD_RNDOUTSTART 0xE0 +#define NAND_CMD_CACHEDPROG 0x15 + +#define NAND_CMD_NONE -1 + +/* Status bits */ +#define NAND_STATUS_FAIL 0x01 +#define NAND_STATUS_FAIL_N1 0x02 +#define NAND_STATUS_TRUE_READY 0x20 +#define NAND_STATUS_READY 0x40 +#define NAND_STATUS_WP 0x80 + +/* + * Constants for ECC_MODES + */ +typedef enum { + NAND_ECC_NONE, + NAND_ECC_SOFT, + NAND_ECC_HW, + NAND_ECC_HW_SYNDROME, + NAND_ECC_HW_OOB_FIRST, + NAND_ECC_SOFT_BCH, +} nand_ecc_modes_t; + +/* + * Constants for Hardware ECC + */ +/* Reset Hardware ECC for read */ +#define NAND_ECC_READ 0 +/* Reset Hardware ECC for write */ +#define NAND_ECC_WRITE 1 +/* Enable Hardware ECC before syndrome is read back from flash */ +#define NAND_ECC_READSYN 2 + +/* Bit mask for flags passed to do_nand_read_ecc */ +#define NAND_GET_DEVICE 0x80 + + +/* + * Option constants for bizarre disfunctionality and real + * features. + */ +/* Buswidth is 16 bit */ +#define NAND_BUSWIDTH_16 0x00000002 +/* Chip has cache program function */ +#define NAND_CACHEPRG 0x00000008 +/* + * Chip requires ready check on read (for auto-incremented sequential read). + * True only for small page devices; large page devices do not support + * autoincrement. + */ +#define NAND_NEED_READRDY 0x00000100 + +/* Chip does not allow subpage writes */ +#define NAND_NO_SUBPAGE_WRITE 0x00000200 + +/* Device is one of 'new' xD cards that expose fake nand command set */ +#define NAND_BROKEN_XD 0x00000400 + +/* Device behaves just like nand, but is readonly */ +#define NAND_ROM 0x00000800 + +/* Device supports subpage reads */ +#define NAND_SUBPAGE_READ 0x00001000 + +/* Options valid for Samsung large page devices */ +#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG + +/* Macros to identify the above */ +#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) +#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) + +/* Non chip related options */ +/* This option skips the bbt scan during initialization. */ +#define NAND_SKIP_BBTSCAN 0x00010000 +/* + * This option is defined if the board driver allocates its own buffers + * (e.g. because it needs them DMA-coherent). + */ +#define NAND_OWN_BUFFERS 0x00020000 +/* Chip may not exist, so silence any errors in scan */ +#define NAND_SCAN_SILENT_NODEV 0x00040000 +/* + * This option could be defined by controller drivers to protect against + * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers + */ +#define NAND_USE_BOUNCE_BUFFER 0x00080000 +/* + * Autodetect nand buswidth with readid/onfi. + * This suppose the driver will configure the hardware in 8 bits mode + * when calling nand_scan_ident, and update its configuration + * before calling nand_scan_tail. + */ +#define NAND_BUSWIDTH_AUTO 0x00080000 + +/* Options set by nand scan */ +/* Nand scan has allocated controller struct */ +#define NAND_CONTROLLER_ALLOC 0x80000000 + +/* Cell info constants */ +#define NAND_CI_CHIPNR_MSK 0x03 +#define NAND_CI_CELLTYPE_MSK 0x0C +#define NAND_CI_CELLTYPE_SHIFT 2 + +/* Keep gcc happy */ +struct nand_chip; + +/* ONFI features */ +#define ONFI_FEATURE_16_BIT_BUS (1 << 0) +#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) + +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* Vendor-specific feature address (Micron) */ +#define ONFI_FEATURE_ADDR_READ_RETRY 0x89 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + +/* ONFI optional commands SET/GET FEATURES supported? */ +#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2) + +struct nand_onfi_params { + /* rev info and features block */ + /* 'O' 'N' 'F' 'I' */ + u8 sig[4]; + __le16 revision; + __le16 features; + __le16 opt_cmd; + u8 reserved0[2]; + __le16 ext_param_page_length; /* since ONFI 2.1 */ + u8 num_of_param_pages; /* since ONFI 2.1 */ + u8 reserved1[17]; + + /* manufacturer information block */ + char manufacturer[12]; + char model[20]; + u8 jedec_id; + __le16 date_code; + u8 reserved2[13]; + + /* memory organization block */ + __le32 byte_per_page; + __le16 spare_bytes_per_page; + __le32 data_bytes_per_ppage; + __le16 spare_bytes_per_ppage; + __le32 pages_per_block; + __le32 blocks_per_lun; + u8 lun_count; + u8 addr_cycles; + u8 bits_per_cell; + __le16 bb_per_lun; + __le16 block_endurance; + u8 guaranteed_good_blocks; + __le16 guaranteed_block_endurance; + u8 programs_per_page; + u8 ppage_attr; + u8 ecc_bits; + u8 interleaved_bits; + u8 interleaved_ops; + u8 reserved3[13]; + + /* electrical parameter block */ + u8 io_pin_capacitance_max; + __le16 async_timing_mode; + __le16 program_cache_timing_mode; + __le16 t_prog; + __le16 t_bers; + __le16 t_r; + __le16 t_ccs; + __le16 src_sync_timing_mode; + __le16 src_ssync_features; + __le16 clk_pin_capacitance_typ; + __le16 io_pin_capacitance_typ; + __le16 input_pin_capacitance_typ; + u8 input_pin_capacitance_max; + u8 driver_strength_support; + __le16 t_int_r; + __le16 t_ald; + u8 reserved4[7]; + + /* vendor */ + __le16 vendor_revision; + u8 vendor[88]; + + __le16 crc; +} __packed; + +#define ONFI_CRC_BASE 0x4F4E + +/* Extended ECC information Block Definition (since ONFI 2.1) */ +struct onfi_ext_ecc_info { + u8 ecc_bits; + u8 codeword_size; + __le16 bb_per_lun; + __le16 block_endurance; + u8 reserved[2]; +} __packed; + +#define ONFI_SECTION_TYPE_0 0 /* Unused section. */ +#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */ +#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */ +struct onfi_ext_section { + u8 type; + u8 length; +} __packed; + +#define ONFI_EXT_SECTION_MAX 8 + +/* Extended Parameter Page Definition (since ONFI 2.1) */ +struct onfi_ext_param_page { + __le16 crc; + u8 sig[4]; /* 'E' 'P' 'P' 'S' */ + u8 reserved0[10]; + struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX]; + + /* + * The actual size of the Extended Parameter Page is in + * @ext_param_page_length of nand_onfi_params{}. + * The following are the variable length sections. + * So we do not add any fields below. Please see the ONFI spec. + */ +} __packed; + +struct nand_onfi_vendor_micron { + u8 two_plane_read; + u8 read_cache; + u8 read_unique_id; + u8 dq_imped; + u8 dq_imped_num_settings; + u8 dq_imped_feat_addr; + u8 rb_pulldown_strength; + u8 rb_pulldown_strength_feat_addr; + u8 rb_pulldown_strength_num_settings; + u8 otp_mode; + u8 otp_page_start; + u8 otp_data_prot_addr; + u8 otp_num_pages; + u8 otp_feat_addr; + u8 read_retry_options; + u8 reserved[72]; + u8 param_revision; +} __packed; + +struct jedec_ecc_info { + u8 ecc_bits; + u8 codeword_size; + __le16 bb_per_lun; + __le16 block_endurance; + u8 reserved[2]; +} __packed; + +/* JEDEC features */ +#define JEDEC_FEATURE_16_BIT_BUS (1 << 0) + +struct nand_jedec_params { + /* rev info and features block */ + /* 'J' 'E' 'S' 'D' */ + u8 sig[4]; + __le16 revision; + __le16 features; + u8 opt_cmd[3]; + __le16 sec_cmd; + u8 num_of_param_pages; + u8 reserved0[18]; + + /* manufacturer information block */ + char manufacturer[12]; + char model[20]; + u8 jedec_id[6]; + u8 reserved1[10]; + + /* memory organization block */ + __le32 byte_per_page; + __le16 spare_bytes_per_page; + u8 reserved2[6]; + __le32 pages_per_block; + __le32 blocks_per_lun; + u8 lun_count; + u8 addr_cycles; + u8 bits_per_cell; + u8 programs_per_page; + u8 multi_plane_addr; + u8 multi_plane_op_attr; + u8 reserved3[38]; + + /* electrical parameter block */ + __le16 async_sdr_speed_grade; + __le16 toggle_ddr_speed_grade; + __le16 sync_ddr_speed_grade; + u8 async_sdr_features; + u8 toggle_ddr_features; + u8 sync_ddr_features; + __le16 t_prog; + __le16 t_bers; + __le16 t_r; + __le16 t_r_multi_plane; + __le16 t_ccs; + __le16 io_pin_capacitance_typ; + __le16 input_pin_capacitance_typ; + __le16 clk_pin_capacitance_typ; + u8 driver_strength_support; + __le16 t_ald; + u8 reserved4[36]; + + /* ECC and endurance block */ + u8 guaranteed_good_blocks; + __le16 guaranteed_block_endurance; + struct jedec_ecc_info ecc_info[4]; + u8 reserved5[29]; + + /* reserved */ + u8 reserved6[148]; + + /* vendor */ + __le16 vendor_rev_num; + u8 reserved7[88]; + + /* CRC for Parameter Page */ + __le16 crc; +} __packed; + +/** + * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices + * @lock: protection lock + * @active: the mtd device which holds the controller currently + * @wq: wait queue to sleep on if a NAND operation is in + * progress used instead of the per chip wait queue + * when a hw controller is available. + */ +struct nand_hw_control { + spinlock_t lock; + struct nand_chip *active; + wait_queue_head_t wq; +}; + +/** + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators + * @layout: ECC layout control struct pointer + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only + * be provided if an hardware ECC is available + * @calculate: function for ECC calculation or readback from ECC hardware + * @correct: function for ECC correction, matching to ECC generator (sw/hw) + * @read_page_raw: function to read a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and always return contiguous in-band and + * out-of-band data even if they're not stored + * contiguously on the NAND chip (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). + * @write_page_raw: function to write a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and consider the passed data as contiguous + * in-band and out-of-band data. ECC controller is + * responsible for doing the appropriate transformations + * to adapt to its specific layout (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). + * @read_page: function to read a page according to the ECC generator + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() + * @write_subpage: function to write parts of the page covered by ECC. + * @write_page: function to write a page according to the ECC generator + * requirements. + * @write_oob_raw: function to write chip OOB data without ECC + * @read_oob_raw: function to read chip OOB data without ECC + * @read_oob: function to read chip OOB data + * @write_oob: function to write chip OOB data + */ +struct nand_ecc_ctrl { + nand_ecc_modes_t mode; + int steps; + int size; + int bytes; + int total; + int strength; + int prepad; + int postpad; + struct nand_ecclayout *layout; + void *priv; + void (*hwctl)(struct mtd_info *mtd, int mode); + int (*calculate)(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code); + int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, + uint8_t *calc_ecc); + int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page); + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page); + int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offs, uint32_t len, uint8_t *buf, int page); + int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *data_buf, int oob_required); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required); + int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int page); + int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page); + int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip, + int page); +}; + +/** + * struct nand_buffers - buffer structure for read/write + * @ecccalc: buffer pointer for calculated ECC, size is oobsize. + * @ecccode: buffer pointer for ECC read from flash, size is oobsize. + * @databuf: buffer pointer for data, size is (page size + oobsize). + * + * Do not change the order of buffers. databuf and oobrbuf must be in + * consecutive order. + */ +struct nand_buffers { + uint8_t *ecccalc; + uint8_t *ecccode; + uint8_t *databuf; +}; + +/** + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the + * flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the + * flash device. + * @read_byte: [REPLACEABLE] read one byte from the chip + * @read_word: [REPLACEABLE] read one word from the chip + * @write_byte: [REPLACEABLE] write a single byte to the chip on the + * low 8 I/O lines + * @write_buf: [REPLACEABLE] write data from the buffer to the chip + * @read_buf: [REPLACEABLE] read data from the chip into the buffer + * @select_chip: [REPLACEABLE] select chip nr + * @block_bad: [REPLACEABLE] check if a block is bad, using OOB markers + * @block_markbad: [REPLACEABLE] mark a block bad + * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling + * ALE/CLE/nCE. Also used to write command and address + * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting + * mtd->oobsize, mtd->writesize and so on. + * @id_data contains the 8 bytes values of NAND_CMD_READID. + * Return with the bus width. + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing + * device ready/busy line. If set to NULL no access to + * ready/busy is available and the ready/busy information + * is read from the chip status register. + * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing + * commands to the chip. + * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on + * ready. + * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for + * setting the read-retry mode. Mostly needed for MLC NAND. + * @ecc: [BOARDSPECIFIC] ECC control structure + * @buffers: buffer structure for read/write + * @hwcontrol: platform-specific hardware control structure + * @erase: [REPLACEABLE] erase function + * @scan_bbt: [REPLACEABLE] function to scan bad block table + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring + * data from array to read regs (tR). + * @state: [INTERN] the current state of the NAND device + * @oob_poi: "poison value buffer," used for laying out OOB data + * before writing + * @page_shift: [INTERN] number of address bits in a page (column + * address bits). + * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock + * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry + * @chip_shift: [INTERN] number of address bits in one chip + * @options: [BOARDSPECIFIC] various chip options. They can partly + * be set to inform nand_scan about special functionality. + * See the defines for further explanation. + * @bbt_options: [INTERN] bad block specific options. All options used + * here must come from bbm.h. By default, these options + * will be copied to the appropriate nand_bbt_descr's. + * @badblockpos: [INTERN] position of the bad block marker in the oob + * area. + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 + * @bits_per_cell: [INTERN] number of bits per cell. i.e., 1 means SLC. + * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet. + * Minimum amount of bit errors per @ecc_step_ds guaranteed + * to be correctable. If unknown, set to zero. + * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, + * also from the datasheet. It is the recommended ECC step + * size, if known; if unknown, set to zero. + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is + * either deduced from the datasheet if the NAND + * chip is not ONFI compliant or set to 0 if it is + * (an ONFI chip is always configured in mode 0 + * after a NAND reset) + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 + * @pagebuf: [INTERN] holds the pagenumber which is currently in + * data_buf. + * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is + * currently in data_buf. + * @subpagesize: [INTERN] holds the subpagesize + * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), + * non 0 if ONFI supported. + * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded), + * non 0 if JEDEC supported. + * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is + * supported, 0 otherwise. + * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is + * supported, 0 otherwise. + * @read_retries: [INTERN] the number of read retry modes supported + * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand + * @bbt: [INTERN] bad block table pointer + * @bbt_td: [REPLACEABLE] bad block table descriptor for flash + * lookup. + * @bbt_md: [REPLACEABLE] bad block table mirror descriptor + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial + * bad block scan. + * @controller: [REPLACEABLE] a pointer to a hardware controller + * structure which is shared among multiple independent + * devices. + * @priv: [OPTIONAL] pointer to private chip data + * @errstat: [OPTIONAL] hardware specific function to perform + * additional error status checks (determine if errors are + * correctable). + * @write_page: [REPLACEABLE] High-level page write function + */ + +struct nand_chip { + void __iomem *IO_ADDR_R; + void __iomem *IO_ADDR_W; + + uint8_t (*read_byte)(struct mtd_info *mtd); + u16 (*read_word)(struct mtd_info *mtd); + void (*write_byte)(struct mtd_info *mtd, uint8_t byte); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + void (*select_chip)(struct mtd_info *mtd, int chip); + int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + int (*init_size)(struct mtd_info *mtd, struct nand_chip *this, + u8 *id_data); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, + int page_addr); + int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); + int (*erase)(struct mtd_info *mtd, int page); + int (*scan_bbt)(struct mtd_info *mtd); + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, + int status, int page); + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, int data_len, const uint8_t *buf, + int oob_required, int page, int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode); + + int chip_delay; + unsigned int options; + unsigned int bbt_options; + + int page_shift; + int phys_erase_shift; + int bbt_erase_shift; + int chip_shift; + int numchips; + uint64_t chipsize; + int pagemask; + int pagebuf; + unsigned int pagebuf_bitflips; + int subpagesize; + uint8_t bits_per_cell; + uint16_t ecc_strength_ds; + uint16_t ecc_step_ds; + int onfi_timing_mode_default; + int badblockpos; + int badblockbits; + + int onfi_version; + int jedec_version; + union { + struct nand_onfi_params onfi_params; + struct nand_jedec_params jedec_params; + }; + + int read_retries; + + flstate_t state; + + uint8_t *oob_poi; + struct nand_hw_control *controller; + + struct nand_ecc_ctrl ecc; + struct nand_buffers *buffers; + struct nand_hw_control hwcontrol; + + uint8_t *bbt; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + + struct nand_bbt_descr *badblock_pattern; + + void *priv; +}; + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec +#define NAND_MFR_FUJITSU 0x04 +#define NAND_MFR_NATIONAL 0x8f +#define NAND_MFR_RENESAS 0x07 +#define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_HYNIX 0xad +#define NAND_MFR_MICRON 0x2c +#define NAND_MFR_AMD 0x01 +#define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 +#define NAND_MFR_SANDISK 0x45 +#define NAND_MFR_INTEL 0x89 +#define NAND_MFR_ATO 0x9b + +/* The maximum expected count of bytes in the NAND ID sequence */ +#define NAND_MAX_ID_LEN 8 + +/* + * A helper for defining older NAND chips where the second ID byte fully + * defined the chip, including the geometry (chip size, eraseblock size, page + * size). All these chips have 512 bytes NAND page size. + */ +#define LEGACY_ID_NAND(nm, devid, chipsz, erasesz, opts) \ + { .name = (nm), {{ .dev_id = (devid) }}, .pagesize = 512, \ + .chipsize = (chipsz), .erasesize = (erasesz), .options = (opts) } + +/* + * A helper for defining newer chips which report their page size and + * eraseblock size via the extended ID bytes. + * + * The real difference between LEGACY_ID_NAND and EXTENDED_ID_NAND is that with + * EXTENDED_ID_NAND, manufacturers overloaded the same device ID so that the + * device ID now only represented a particular total chip size (and voltage, + * buswidth), and the page size, eraseblock size, and OOB size could vary while + * using the same device ID. + */ +#define EXTENDED_ID_NAND(nm, devid, chipsz, opts) \ + { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \ + .options = (opts) } + +#define NAND_ECC_INFO(_strength, _step) \ + { .strength_ds = (_strength), .step_ds = (_step) } +#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds) +#define NAND_ECC_STEP(type) ((type)->ecc.step_ds) + +/** + * struct nand_flash_dev - NAND Flash Device ID Structure + * @name: a human-readable name of the NAND chip + * @dev_id: the device ID (the second byte of the full chip ID array) + * @mfr_id: manufecturer ID part of the full chip ID array (refers the same + * memory address as @id[0]) + * @dev_id: device ID part of the full chip ID array (refers the same memory + * address as @id[1]) + * @id: full device ID array + * @pagesize: size of the NAND page in bytes; if 0, then the real page size (as + * well as the eraseblock size) is determined from the extended NAND + * chip ID array) + * @chipsize: total chip size in MiB + * @erasesize: eraseblock size in bytes (determined from the extended ID if 0) + * @options: stores various chip bit options + * @id_len: The valid length of the @id. + * @oobsize: OOB size + * @ecc: ECC correctability and step information from the datasheet. + * @ecc.strength_ds: The ECC correctability from the datasheet, same as the + * @ecc_strength_ds in nand_chip{}. + * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the + * @ecc_step_ds in nand_chip{}, also from the datasheet. + * For example, the "4bit ECC for each 512Byte" can be set with + * NAND_ECC_INFO(4, 512). + * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND + * reset. Should be deduced from timings described + * in the datasheet. + * + */ +struct nand_flash_dev { + char *name; + union { + struct { + uint8_t mfr_id; + uint8_t dev_id; + }; + uint8_t id[NAND_MAX_ID_LEN]; + }; + unsigned int pagesize; + unsigned int chipsize; + unsigned int erasesize; + unsigned int options; + uint16_t id_len; + uint16_t oobsize; + struct { + uint16_t strength_ds; + uint16_t step_ds; + } ecc; + int onfi_timing_mode_default; +}; + +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @name: Manufacturer name + * @id: manufacturer ID code of device. +*/ +struct nand_manufacturers { + int id; + char *name; +}; + +extern struct nand_flash_dev nand_flash_ids[]; +extern struct nand_manufacturers nand_manuf_ids[]; + +extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int nand_default_bbt(struct mtd_info *mtd); +extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); +extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); +extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); +extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + int allowbbt); +extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, uint8_t *buf); + +/** + * struct platform_nand_chip - chip level device structure + * @nr_chips: max. number of chips to scan for + * @chip_offset: chip number offset + * @nr_partitions: number of partitions pointed to by partitions (or zero) + * @partitions: mtd partition list + * @chip_delay: R/B delay value in us + * @options: Option flags, e.g. 16bit buswidth + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH + * @ecclayout: ECC layout info structure + * @part_probe_types: NULL-terminated array of probe types + */ +struct platform_nand_chip { + int nr_chips; + int chip_offset; + int nr_partitions; + struct mtd_partition *partitions; + struct nand_ecclayout *ecclayout; + int chip_delay; + unsigned int options; + unsigned int bbt_options; + const char **part_probe_types; +}; + +/* Keep gcc happy */ +struct platform_device; + +/** + * struct platform_nand_ctrl - controller level device structure + * @probe: platform specific function to probe/setup hardware + * @remove: platform specific function to remove/teardown hardware + * @hwcontrol: platform specific hardware control structure + * @dev_ready: platform specific function to read ready/busy pin + * @select_chip: platform specific chip select function + * @cmd_ctrl: platform specific function for controlling + * ALE/CLE/nCE. Also used to write command and address + * @write_buf: platform specific function for write buffer + * @read_buf: platform specific function for read buffer + * @read_byte: platform specific function to read one byte from chip + * @priv: private data to transport driver specific settings + * + * All fields are optional and depend on the hardware driver requirements + */ +struct platform_nand_ctrl { + int (*probe)(struct platform_device *pdev); + void (*remove)(struct platform_device *pdev); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*select_chip)(struct mtd_info *mtd, int chip); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + unsigned char (*read_byte)(struct mtd_info *mtd); + void *priv; +}; + +/** + * struct platform_nand_data - container structure for platform-specific data + * @chip: chip level chip structure + * @ctrl: controller level device structure + */ +struct platform_nand_data { + struct platform_nand_chip chip; + struct platform_nand_ctrl ctrl; +}; + +/* Some helpers to access the data structures */ +static inline +struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + return chip->priv; +} + +/* return the supported features. */ +static inline int onfi_feature(struct nand_chip *chip) +{ + return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0; +} + +/* return the supported asynchronous timing mode. */ +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} + +/* + * Check if it is a SLC nand. + * The !nand_is_slc() can be used to check the MLC/TLC nand chips. + * We do not distinguish the MLC and TLC now. + */ +static inline bool nand_is_slc(struct nand_chip *chip) +{ + return chip->bits_per_cell == 1; +} + +/** + * Check if the opcode's address should be sent only on the lower 8 bits + * @command: opcode to check + */ +static inline int nand_opcode_8bits(unsigned int command) +{ + switch (command) { + case NAND_CMD_READID: + case NAND_CMD_PARAM: + case NAND_CMD_GET_FEATURES: + case NAND_CMD_SET_FEATURES: + return 1; + default: + break; + } + return 0; +} + +/* return the supported JEDEC features. */ +static inline int jedec_feature(struct nand_chip *chip) +{ + return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features) + : 0; +} + +/* + * struct nand_sdr_timings - SDR NAND chip timings + * + * This struct defines the timing requirements of a SDR NAND chip. + * These informations can be found in every NAND datasheets and the timings + * meaning are described in the ONFI specifications: + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing + * Parameters) + * + * All these timings are expressed in picoseconds. + */ + +struct nand_sdr_timings { + u32 tALH_min; + u32 tADL_min; + u32 tALS_min; + u32 tAR_min; + u32 tCEA_max; + u32 tCEH_min; + u32 tCH_min; + u32 tCHZ_max; + u32 tCLH_min; + u32 tCLR_min; + u32 tCLS_min; + u32 tCOH_min; + u32 tCS_min; + u32 tDH_min; + u32 tDS_min; + u32 tFEAT_max; + u32 tIR_min; + u32 tITC_max; + u32 tRC_min; + u32 tREA_max; + u32 tREH_min; + u32 tRHOH_min; + u32 tRHW_min; + u32 tRHZ_max; + u32 tRLOH_min; + u32 tRP_min; + u32 tRR_min; + u64 tRST_max; + u32 tWB_max; + u32 tWC_min; + u32 tWH_min; + u32 tWHR_min; + u32 tWP_min; + u32 tWW_min; +}; + +/* get timing characteristics from ONFI timing mode. */ +const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); +#endif /* __LINUX_MTD_NAND_H */ diff --git a/kernel/include/linux/mtd/nand_bch.h b/kernel/include/linux/mtd/nand_bch.h new file mode 100644 index 000000000..74acf5367 --- /dev/null +++ b/kernel/include/linux/mtd/nand_bch.h @@ -0,0 +1,72 @@ +/* + * Copyright © 2011 Ivan Djelic + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is the header for the NAND BCH ECC implementation. + */ + +#ifndef __MTD_NAND_BCH_H__ +#define __MTD_NAND_BCH_H__ + +struct mtd_info; +struct nand_bch_control; + +#if defined(CONFIG_MTD_NAND_ECC_BCH) + +static inline int mtd_nand_has_bch(void) { return 1; } + +/* + * Calculate BCH ecc code + */ +int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code); + +/* + * Detect and correct bit errors + */ +int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, + u_char *calc_ecc); +/* + * Initialize BCH encoder/decoder + */ +struct nand_bch_control * +nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, + unsigned int eccbytes, struct nand_ecclayout **ecclayout); +/* + * Release BCH encoder/decoder resources + */ +void nand_bch_free(struct nand_bch_control *nbc); + +#else /* !CONFIG_MTD_NAND_ECC_BCH */ + +static inline int mtd_nand_has_bch(void) { return 0; } + +static inline int +nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + return -1; +} + +static inline int +nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + return -1; +} + +static inline struct nand_bch_control * +nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, + unsigned int eccbytes, struct nand_ecclayout **ecclayout) +{ + return NULL; +} + +static inline void nand_bch_free(struct nand_bch_control *nbc) {} + +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + +#endif /* __MTD_NAND_BCH_H__ */ diff --git a/kernel/include/linux/mtd/nand_ecc.h b/kernel/include/linux/mtd/nand_ecc.h new file mode 100644 index 000000000..4d8406c81 --- /dev/null +++ b/kernel/include/linux/mtd/nand_ecc.h @@ -0,0 +1,42 @@ +/* + * drivers/mtd/nand_ecc.h + * + * Copyright (C) 2000-2010 Steven J. Hill + * David Woodhouse + * Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is the header for the ECC algorithm. + */ + +#ifndef __MTD_NAND_ECC_H__ +#define __MTD_NAND_ECC_H__ + +struct mtd_info; + +/* + * Calculate 3 byte ECC code for eccsize byte block + */ +void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize, + u_char *ecc_code); + +/* + * Calculate 3 byte ECC code for 256/512 byte block + */ +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); + +/* + * Detect and correct a 1 bit error for eccsize byte block + */ +int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc, + unsigned int eccsize); + +/* + * Detect and correct a 1 bit error for 256/512 byte block + */ +int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + +#endif /* __MTD_NAND_ECC_H__ */ diff --git a/kernel/include/linux/mtd/ndfc.h b/kernel/include/linux/mtd/ndfc.h new file mode 100644 index 000000000..d0558a982 --- /dev/null +++ b/kernel/include/linux/mtd/ndfc.h @@ -0,0 +1,67 @@ +/* + * linux/include/linux/mtd/ndfc.h + * + * Copyright (c) 2006 Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains defines, datastructures for ndfc nand controller + * + */ +#ifndef __LINUX_MTD_NDFC_H +#define __LINUX_MTD_NDFC_H + +/* NDFC Register definitions */ +#define NDFC_CMD 0x00 +#define NDFC_ALE 0x04 +#define NDFC_DATA 0x08 +#define NDFC_ECC 0x10 +#define NDFC_BCFG0 0x30 +#define NDFC_BCFG1 0x34 +#define NDFC_BCFG2 0x38 +#define NDFC_BCFG3 0x3c +#define NDFC_CCR 0x40 +#define NDFC_STAT 0x44 +#define NDFC_HWCTL 0x48 +#define NDFC_REVID 0x50 + +#define NDFC_STAT_IS_READY 0x01000000 + +#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */ +#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */ +#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */ +#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */ +#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */ +#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */ +#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */ +#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */ +#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */ +#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */ +#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */ +#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */ +#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */ +#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */ +#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */ +#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */ + +#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */ +#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */ +#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */ +#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */ +#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */ + +#define NDFC_MAX_BANKS 4 + +struct ndfc_controller_settings { + uint32_t ccr_settings; + uint64_t ndfc_erpn; +}; + +struct ndfc_chip_settings { + uint32_t bank_settings; +}; + +#endif diff --git a/kernel/include/linux/mtd/nftl.h b/kernel/include/linux/mtd/nftl.h new file mode 100644 index 000000000..b059629e2 --- /dev/null +++ b/kernel/include/linux/mtd/nftl.h @@ -0,0 +1,72 @@ +/* + * Copyright © 1999-2010 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __MTD_NFTL_H__ +#define __MTD_NFTL_H__ + +#include +#include + +#include + +/* these info are used in ReplUnitTable */ +#define BLOCK_NIL 0xffff /* last block of a chain */ +#define BLOCK_FREE 0xfffe /* free block */ +#define BLOCK_NOTEXPLORED 0xfffd /* non explored block, only used during mounting */ +#define BLOCK_RESERVED 0xfffc /* bios block or bad block */ + +struct NFTLrecord { + struct mtd_blktrans_dev mbd; + __u16 MediaUnit, SpareMediaUnit; + __u32 EraseSize; + struct NFTLMediaHeader MediaHdr; + int usecount; + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + __u16 numvunits; + __u16 lastEUN; /* should be suppressed */ + __u16 numfreeEUNs; + __u16 LastFreeEUN; /* To speed up finding a free EUN */ + int head,sect,cyl; + __u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */ + __u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */ + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; + struct nand_ecclayout oobinfo; +}; + +int NFTL_mount(struct NFTLrecord *s); +int NFTL_formatblock(struct NFTLrecord *s, int block); + +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + +#ifndef NFTL_MAJOR +#define NFTL_MAJOR 93 +#endif + +#define MAX_NFTLS 16 +#define MAX_SECTORS_PER_UNIT 64 +#define NFTL_PARTN_BITS 4 + +#endif /* __MTD_NFTL_H__ */ diff --git a/kernel/include/linux/mtd/onenand.h b/kernel/include/linux/mtd/onenand.h new file mode 100644 index 000000000..4596503c9 --- /dev/null +++ b/kernel/include/linux/mtd/onenand.h @@ -0,0 +1,242 @@ +/* + * linux/include/linux/mtd/onenand.h + * + * Copyright © 2005-2009 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_ONENAND_H +#define __LINUX_MTD_ONENAND_H + +#include +#include +#include +#include +#include + +#define MAX_DIES 2 +#define MAX_BUFFERRAM 2 + +/* Scan and identify a OneNAND device */ +extern int onenand_scan(struct mtd_info *mtd, int max_chips); +/* Free resources held by the OneNAND device */ +extern void onenand_release(struct mtd_info *mtd); + +/** + * struct onenand_bufferram - OneNAND BufferRAM Data + * @blockpage: block & page address in BufferRAM + */ +struct onenand_bufferram { + int blockpage; +}; + +/** + * struct onenand_chip - OneNAND Private Flash Chip Data + * @base: [BOARDSPECIFIC] address to access OneNAND + * @dies: [INTERN][FLEX-ONENAND] number of dies on chip + * @boundary: [INTERN][FLEX-ONENAND] Boundary of the dies + * @diesize: [INTERN][FLEX-ONENAND] Size of the dies + * @chipsize: [INTERN] the size of one chip for multichip arrays + * FIXME For Flex-OneNAND, chipsize holds maximum possible + * device size ie when all blocks are considered MLC + * @device_id: [INTERN] device ID + * @density_mask: chip density, used for DDP devices + * @verstion_id: [INTERN] version ID + * @options: [BOARDSPECIFIC] various chip options. They can + * partly be set to inform onenand_scan about + * @erase_shift: [INTERN] number of address bits in a block + * @page_shift: [INTERN] number of address bits in a page + * @page_mask: [INTERN] a page per block mask + * @writesize: [INTERN] a real page size + * @bufferram_index: [INTERN] BufferRAM index + * @bufferram: [INTERN] BufferRAM info + * @readw: [REPLACEABLE] hardware specific function for read short + * @writew: [REPLACEABLE] hardware specific function for write short + * @command: [REPLACEABLE] hardware specific function for writing + * commands to the chip + * @wait: [REPLACEABLE] hardware specific function for wait on ready + * @bbt_wait: [REPLACEABLE] hardware specific function for bbt wait on ready + * @unlock_all: [REPLACEABLE] hardware specific function for unlock all + * @read_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area + * @write_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area + * @read_word: [REPLACEABLE] hardware specific function for read + * register of OneNAND + * @write_word: [REPLACEABLE] hardware specific function for write + * register of OneNAND + * @mmcontrol: sync burst read function + * @chip_probe: [REPLACEABLE] hardware specific function for chip probe + * @block_markbad: function to mark a block as bad + * @scan_bbt: [REPLACEALBE] hardware specific function for scanning + * Bad block Table + * @chip_lock: [INTERN] spinlock used to protect access to this + * structure and the chip + * @wq: [INTERN] wait queue to sleep on if a OneNAND + * operation is in progress + * @state: [INTERN] the current state of the OneNAND device + * @page_buf: [INTERN] page main data buffer + * @oob_buf: [INTERN] page oob data buffer + * @subpagesize: [INTERN] holds the subpagesize + * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @bbm: [REPLACEABLE] pointer to Bad Block Management + * @priv: [OPTIONAL] pointer to private chip date + */ +struct onenand_chip { + void __iomem *base; + unsigned dies; + unsigned boundary[MAX_DIES]; + loff_t diesize[MAX_DIES]; + unsigned int chipsize; + unsigned int device_id; + unsigned int version_id; + unsigned int technology; + unsigned int density_mask; + unsigned int options; + + unsigned int erase_shift; + unsigned int page_shift; + unsigned int page_mask; + unsigned int writesize; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; + + int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len); + int (*wait)(struct mtd_info *mtd, int state); + int (*bbt_wait)(struct mtd_info *mtd, int state); + void (*unlock_all)(struct mtd_info *mtd); + int (*read_bufferram)(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count); + int (*write_bufferram)(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, size_t count); + unsigned short (*read_word)(void __iomem *addr); + void (*write_word)(unsigned short value, void __iomem *addr); + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + int (*chip_probe)(struct mtd_info *mtd); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + int (*scan_bbt)(struct mtd_info *mtd); + int (*enable)(struct mtd_info *mtd); + int (*disable)(struct mtd_info *mtd); + + struct completion complete; + int irq; + + spinlock_t chip_lock; + wait_queue_head_t wq; + flstate_t state; + unsigned char *page_buf; + unsigned char *oob_buf; +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE + unsigned char *verify_buf; +#endif + + int subpagesize; + struct nand_ecclayout *ecclayout; + + void *bbm; + + void *priv; + + /* + * Shows that the current operation is composed + * of sequence of commands. For example, cache program. + * Such command status OnGo bit is checked at the end of + * sequence. + */ + unsigned int ongoing; +}; + +/* + * Helper macros + */ +#define ONENAND_PAGES_PER_BLOCK (1<<6) + +#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) +#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) +#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) +#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) +#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) +#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) + +#define FLEXONENAND(this) \ + (this->device_id & DEVICE_IS_FLEXONENAND) +#define ONENAND_GET_SYS_CFG1(this) \ + (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) +#define ONENAND_SET_SYS_CFG1(v, this) \ + (this->write_word(v, this->base + ONENAND_REG_SYS_CFG1)) + +#define ONENAND_IS_DDP(this) \ + (this->device_id & ONENAND_DEVICE_IS_DDP) + +#define ONENAND_IS_MLC(this) \ + (this->technology & ONENAND_TECHNOLOGY_IS_MLC) + +#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM +#define ONENAND_IS_2PLANE(this) \ + (this->options & ONENAND_HAS_2PLANE) +#else +#define ONENAND_IS_2PLANE(this) (0) +#endif + +#define ONENAND_IS_CACHE_PROGRAM(this) \ + (this->options & ONENAND_HAS_CACHE_PROGRAM) + +#define ONENAND_IS_NOP_1(this) \ + (this->options & ONENAND_HAS_NOP_1) + +/* Check byte access in OneNAND */ +#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1) + +/* + * Options bits + */ +#define ONENAND_HAS_CONT_LOCK (0x0001) +#define ONENAND_HAS_UNLOCK_ALL (0x0002) +#define ONENAND_HAS_2PLANE (0x0004) +#define ONENAND_HAS_4KB_PAGE (0x0008) +#define ONENAND_HAS_CACHE_PROGRAM (0x0010) +#define ONENAND_HAS_NOP_1 (0x0020) +#define ONENAND_SKIP_UNLOCK_CHECK (0x0100) +#define ONENAND_PAGEBUF_ALLOC (0x1000) +#define ONENAND_OOBBUF_ALLOC (0x2000) +#define ONENAND_SKIP_INITIAL_UNLOCKING (0x4000) + +#define ONENAND_IS_4KB_PAGE(this) \ + (this->options & ONENAND_HAS_4KB_PAGE) + +/* + * OneNAND Flash Manufacturer ID Codes + */ +#define ONENAND_MFR_SAMSUNG 0xec +#define ONENAND_MFR_NUMONYX 0x20 + +/** + * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure + * @name: Manufacturer name + * @id: manufacturer ID code of device. +*/ +struct onenand_manufacturers { + int id; + char *name; +}; + +int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops); +unsigned onenand_block(struct onenand_chip *this, loff_t addr); +loff_t onenand_addr(struct onenand_chip *this, int block); +int flexonenand_region(struct mtd_info *mtd, loff_t addr); + +struct mtd_partition; + +struct onenand_platform_data { + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + int (*read_bufferram)(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count); + struct mtd_partition *parts; + unsigned int nr_parts; +}; + +#endif /* __LINUX_MTD_ONENAND_H */ diff --git a/kernel/include/linux/mtd/onenand_regs.h b/kernel/include/linux/mtd/onenand_regs.h new file mode 100644 index 000000000..d60130f88 --- /dev/null +++ b/kernel/include/linux/mtd/onenand_regs.h @@ -0,0 +1,223 @@ +/* + * linux/include/linux/mtd/onenand_regs.h + * + * OneNAND Register header file + * + * Copyright (C) 2005-2007 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ONENAND_REG_H +#define __ONENAND_REG_H + +/* Memory Address Map Translation (Word order) */ +#define ONENAND_MEMORY_MAP(x) ((x) << 1) + +/* + * External BufferRAM area + */ +#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) +#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) +#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) + +/* + * OneNAND Registers + */ +#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) +#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) +#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) +#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) +#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) +#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) +#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) + +#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) +#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) +#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) +#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) +#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) +#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) +#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) +#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) + +#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) +#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) +#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) +#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) +#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) +#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) +#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) +#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) +#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) + +#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) +#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) +#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) +#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) +#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) +#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) +#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) +#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) +#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) + +/* + * Device ID Register F001h (R) + */ +#define DEVICE_IS_FLEXONENAND (1 << 9) +#define FLEXONENAND_PI_MASK (0x3ff) +#define FLEXONENAND_PI_UNLOCK_SHIFT (14) +#define ONENAND_DEVICE_DENSITY_MASK (0xf) +#define ONENAND_DEVICE_DENSITY_SHIFT (4) +#define ONENAND_DEVICE_IS_DDP (1 << 3) +#define ONENAND_DEVICE_IS_DEMUX (1 << 2) +#define ONENAND_DEVICE_VCC_MASK (0x3) + +#define ONENAND_DEVICE_DENSITY_512Mb (0x002) +#define ONENAND_DEVICE_DENSITY_1Gb (0x003) +#define ONENAND_DEVICE_DENSITY_2Gb (0x004) +#define ONENAND_DEVICE_DENSITY_4Gb (0x005) + +/* + * Version ID Register F002h (R) + */ +#define ONENAND_VERSION_PROCESS_SHIFT (8) + +/* + * Technology Register F006h (R) + */ +#define ONENAND_TECHNOLOGY_IS_MLC (1 << 0) + +/* + * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W) + */ +#define ONENAND_DDP_SHIFT (15) +#define ONENAND_DDP_CHIP0 (0) +#define ONENAND_DDP_CHIP1 (1 << ONENAND_DDP_SHIFT) + +/* + * Start Address 8 F107h (R/W) + */ +/* Note: It's actually 0x3f in case of SLC */ +#define ONENAND_FPA_MASK (0x7f) +#define ONENAND_FPA_SHIFT (2) +#define ONENAND_FSA_MASK (0x03) + +/* + * Start Buffer Register F200h (R/W) + */ +#define ONENAND_BSA_MASK (0x03) +#define ONENAND_BSA_SHIFT (8) +#define ONENAND_BSA_BOOTRAM (0 << 2) +#define ONENAND_BSA_DATARAM0 (2 << 2) +#define ONENAND_BSA_DATARAM1 (3 << 2) +/* Note: It's actually 0x03 in case of SLC */ +#define ONENAND_BSC_MASK (0x07) + +/* + * Command Register F220h (R/W) + */ +#define ONENAND_CMD_READ (0x00) +#define ONENAND_CMD_READOOB (0x13) +#define ONENAND_CMD_PROG (0x80) +#define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_2X_PROG (0x7D) +#define ONENAND_CMD_2X_CACHE_PROG (0x7F) +#define ONENAND_CMD_UNLOCK (0x23) +#define ONENAND_CMD_LOCK (0x2A) +#define ONENAND_CMD_LOCK_TIGHT (0x2C) +#define ONENAND_CMD_UNLOCK_ALL (0x27) +#define ONENAND_CMD_ERASE (0x94) +#define ONENAND_CMD_MULTIBLOCK_ERASE (0x95) +#define ONENAND_CMD_ERASE_VERIFY (0x71) +#define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_OTP_ACCESS (0x65) +#define ONENAND_CMD_READID (0x90) +#define FLEXONENAND_CMD_PI_UPDATE (0x05) +#define FLEXONENAND_CMD_PI_ACCESS (0x66) +#define FLEXONENAND_CMD_RECOVER_LSB (0x05) + +/* NOTE: Those are not *REAL* commands */ +#define ONENAND_CMD_BUFFERRAM (0x1978) +#define FLEXONENAND_CMD_READ_PI (0x1985) + +/* + * System Configuration 1 Register F221h (R, R/W) + */ +#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) +#define ONENAND_SYS_CFG1_BRL_7 (7 << 12) +#define ONENAND_SYS_CFG1_BRL_6 (6 << 12) +#define ONENAND_SYS_CFG1_BRL_5 (5 << 12) +#define ONENAND_SYS_CFG1_BRL_4 (4 << 12) +#define ONENAND_SYS_CFG1_BRL_3 (3 << 12) +#define ONENAND_SYS_CFG1_BRL_10 (2 << 12) +#define ONENAND_SYS_CFG1_BRL_9 (1 << 12) +#define ONENAND_SYS_CFG1_BRL_8 (0 << 12) +#define ONENAND_SYS_CFG1_BRL_SHIFT (12) +#define ONENAND_SYS_CFG1_BL_32 (4 << 9) +#define ONENAND_SYS_CFG1_BL_16 (3 << 9) +#define ONENAND_SYS_CFG1_BL_8 (2 << 9) +#define ONENAND_SYS_CFG1_BL_4 (1 << 9) +#define ONENAND_SYS_CFG1_BL_CONT (0 << 9) +#define ONENAND_SYS_CFG1_BL_SHIFT (9) +#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) +#define ONENAND_SYS_CFG1_RDY (1 << 7) +#define ONENAND_SYS_CFG1_INT (1 << 6) +#define ONENAND_SYS_CFG1_IOBE (1 << 5) +#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) +#define ONENAND_SYS_CFG1_VHF (1 << 3) +#define ONENAND_SYS_CFG1_HF (1 << 2) +#define ONENAND_SYS_CFG1_SYNC_WRITE (1 << 1) + +/* + * Controller Status Register F240h (R) + */ +#define ONENAND_CTRL_ONGO (1 << 15) +#define ONENAND_CTRL_LOCK (1 << 14) +#define ONENAND_CTRL_LOAD (1 << 13) +#define ONENAND_CTRL_PROGRAM (1 << 12) +#define ONENAND_CTRL_ERASE (1 << 11) +#define ONENAND_CTRL_ERROR (1 << 10) +#define ONENAND_CTRL_RSTB (1 << 7) +#define ONENAND_CTRL_OTP_L (1 << 6) +#define ONENAND_CTRL_OTP_BL (1 << 5) + +/* + * Interrupt Status Register F241h (R) + */ +#define ONENAND_INT_MASTER (1 << 15) +#define ONENAND_INT_READ (1 << 7) +#define ONENAND_INT_WRITE (1 << 6) +#define ONENAND_INT_ERASE (1 << 5) +#define ONENAND_INT_RESET (1 << 4) +#define ONENAND_INT_CLEAR (0 << 0) + +/* + * NAND Flash Write Protection Status Register F24Eh (R) + */ +#define ONENAND_WP_US (1 << 2) +#define ONENAND_WP_LS (1 << 1) +#define ONENAND_WP_LTS (1 << 0) + +/* + * ECC Status Reigser FF00h (R) + */ +#define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_1BIT_ALL (0x5555) +#define ONENAND_ECC_2BIT (1 << 1) +#define ONENAND_ECC_2BIT_ALL (0xAAAA) +#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010) +#define ONENAND_ECC_3BIT (1 << 2) +#define ONENAND_ECC_4BIT (1 << 3) +#define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010) + +/* + * One-Time Programmable (OTP) + */ +#define FLEXONENAND_OTP_LOCK_OFFSET (2048) +#define ONENAND_OTP_LOCK_OFFSET (14) + +#endif /* __ONENAND_REG_H */ diff --git a/kernel/include/linux/mtd/partitions.h b/kernel/include/linux/mtd/partitions.h new file mode 100644 index 000000000..6a35e6de5 --- /dev/null +++ b/kernel/include/linux/mtd/partitions.h @@ -0,0 +1,88 @@ +/* + * MTD partitioning layer definitions + * + * (C) 2000 Nicolas Pitre + * + * This code is GPL + */ + +#ifndef MTD_PARTITIONS_H +#define MTD_PARTITIONS_H + +#include + + +/* + * Partition definition structure: + * + * An array of struct partition is passed along with a MTD object to + * mtd_device_register() to create them. + * + * For each partition, these fields are available: + * name: string that will be used to label the partition's MTD device. + * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition + * will extend to the end of the master MTD device. + * offset: absolute starting position within the master MTD device; if + * defined as MTDPART_OFS_APPEND, the partition will start where the + * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block; + * if MTDPART_OFS_RETAIN, consume as much as possible, leaving size + * after the end of partition. + * mask_flags: contains flags that have to be masked (removed) from the + * master MTD flag set for the corresponding MTD partition. + * For example, to force a read-only partition, simply adding + * MTD_WRITEABLE to the mask_flags will do the trick. + * + * Note: writeable partitions require their size and offset be + * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). + */ + +struct mtd_partition { + const char *name; /* identifier string */ + uint64_t size; /* partition size */ + uint64_t offset; /* offset within the master MTD space */ + uint32_t mask_flags; /* master MTD flags to mask out for this partition */ + struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ +}; + +#define MTDPART_OFS_RETAIN (-3) +#define MTDPART_OFS_NXTBLK (-2) +#define MTDPART_OFS_APPEND (-1) +#define MTDPART_SIZ_FULL (0) + + +struct mtd_info; +struct device_node; + +/** + * struct mtd_part_parser_data - used to pass data to MTD partition parsers. + * @origin: for RedBoot, start address of MTD device + * @of_node: for OF parsers, device node containing partitioning information + */ +struct mtd_part_parser_data { + unsigned long origin; + struct device_node *of_node; +}; + + +/* + * Functions dealing with the various ways of partitioning the space + */ + +struct mtd_part_parser { + struct list_head list; + struct module *owner; + const char *name; + int (*parse_fn)(struct mtd_info *, struct mtd_partition **, + struct mtd_part_parser_data *); +}; + +extern void register_mtd_parser(struct mtd_part_parser *parser); +extern void deregister_mtd_parser(struct mtd_part_parser *parser); + +int mtd_is_partition(const struct mtd_info *mtd); +int mtd_add_partition(struct mtd_info *master, const char *name, + long long offset, long long length); +int mtd_del_partition(struct mtd_info *master, int partno); +uint64_t mtd_get_device_size(const struct mtd_info *mtd); + +#endif diff --git a/kernel/include/linux/mtd/pfow.h b/kernel/include/linux/mtd/pfow.h new file mode 100644 index 000000000..42ff7ff09 --- /dev/null +++ b/kernel/include/linux/mtd/pfow.h @@ -0,0 +1,156 @@ +/* Primary function overlay window definitions + * and service functions used by LPDDR chips + */ +#ifndef __LINUX_MTD_PFOW_H +#define __LINUX_MTD_PFOW_H + +#include + +/* PFOW registers addressing */ +/* Address of symbol "P" */ +#define PFOW_QUERY_STRING_P 0x0000 +/* Address of symbol "F" */ +#define PFOW_QUERY_STRING_F 0x0002 +/* Address of symbol "O" */ +#define PFOW_QUERY_STRING_O 0x0004 +/* Address of symbol "W" */ +#define PFOW_QUERY_STRING_W 0x0006 +/* Identification info for LPDDR chip */ +#define PFOW_MANUFACTURER_ID 0x0020 +#define PFOW_DEVICE_ID 0x0022 +/* Address in PFOW where prog buffer can can be found */ +#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040 +/* Size of program buffer in words */ +#define PFOW_PROGRAM_BUFFER_SIZE 0x0042 +/* Address command code register */ +#define PFOW_COMMAND_CODE 0x0080 +/* command data register */ +#define PFOW_COMMAND_DATA 0x0084 +/* command address register lower address bits */ +#define PFOW_COMMAND_ADDRESS_L 0x0088 +/* command address register upper address bits */ +#define PFOW_COMMAND_ADDRESS_H 0x008a +/* number of bytes to be proggrammed lower address bits */ +#define PFOW_DATA_COUNT_L 0x0090 +/* number of bytes to be proggrammed higher address bits */ +#define PFOW_DATA_COUNT_H 0x0092 +/* command execution register, the only possible value is 0x01 */ +#define PFOW_COMMAND_EXECUTE 0x00c0 +/* 0x01 should be written at this address to clear buffer */ +#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4 +/* device program/erase suspend register */ +#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8 +/* device status register */ +#define PFOW_DSR 0x00cc + +/* LPDDR memory device command codes */ +/* They are possible values of PFOW command code register */ +#define LPDDR_WORD_PROGRAM 0x0041 +#define LPDDR_BUFF_PROGRAM 0x00E9 +#define LPDDR_BLOCK_ERASE 0x0020 +#define LPDDR_LOCK_BLOCK 0x0061 +#define LPDDR_UNLOCK_BLOCK 0x0062 +#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065 +#define LPDDR_INFO_QUERY 0x0098 +#define LPDDR_READ_OTP 0x0097 +#define LPDDR_PROG_OTP 0x00C0 +#define LPDDR_RESUME 0x00D0 + +/* Defines possible value of PFOW command execution register */ +#define LPDDR_START_EXECUTION 0x0001 + +/* Defines possible value of PFOW program/erase suspend register */ +#define LPDDR_SUSPEND 0x0001 + +/* Possible values of PFOW device status register */ +/* access R - read; RC read & clearable */ +#define DSR_DPS (1<<1) /* RC; device protect status + * 0 - not protected 1 - locked */ +#define DSR_PSS (1<<2) /* R; program suspend status; + * 0-prog in progress/completed, + * 1- prog suspended */ +#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */ +#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */ +#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status; + * 0-success erase/blank check, + * 1 blank check error */ +#define DSR_ESS (1<<6) /* R; erase suspend status; + * 0-erase in progress/complete, + * 1 erase suspended */ +#define DSR_READY_STATUS (1<<7) /* R; Device status + * 0-busy, + * 1-ready */ +#define DSR_RPS (0x3<<8) /* RC; region program status + * 00 - Success, + * 01-re-program attempt in region with + * object mode data, + * 10-object mode program w attempt in + * region with control mode data + * 11-attempt to program invalid half + * with 0x41 command */ +#define DSR_AOS (1<<12) /* RC; 1- AO related failure */ +#define DSR_AVAILABLE (1<<15) /* R; Device availbility + * 1 - Device available + * 0 - not available */ + +/* The superset of all possible error bits in DSR */ +#define DSR_ERR 0x133A + +static inline void send_pfow_command(struct map_info *map, + unsigned long cmd_code, unsigned long adr, + unsigned long len, map_word *datum) +{ + int bits_per_chip = map_bankwidth(map) * 8; + + map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE); + map_write(map, CMD(adr & ((1<pfow_base + PFOW_COMMAND_ADDRESS_L); + map_write(map, CMD(adr>>bits_per_chip), + map->pfow_base + PFOW_COMMAND_ADDRESS_H); + if (len) { + map_write(map, CMD(len & ((1<pfow_base + PFOW_DATA_COUNT_L); + map_write(map, CMD(len>>bits_per_chip), + map->pfow_base + PFOW_DATA_COUNT_H); + } + if (datum) + map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA); + + /* Command execution start */ + map_write(map, CMD(LPDDR_START_EXECUTION), + map->pfow_base + PFOW_COMMAND_EXECUTE); +} + +static inline void print_drs_error(unsigned dsr) +{ + int prog_status = (dsr & DSR_RPS) >> 8; + + if (!(dsr & DSR_AVAILABLE)) + printk(KERN_NOTICE"DSR.15: (0) Device not Available\n"); + if (prog_status & 0x03) + printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid " + "half with 41h command\n"); + else if (prog_status & 0x02) + printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt " + "in region with Control Mode data\n"); + else if (prog_status & 0x01) + printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region " + "with Object Mode data\n"); + if (!(dsr & DSR_READY_STATUS)) + printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n"); + if (dsr & DSR_ESS) + printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n"); + if (dsr & DSR_ERASE_STATUS) + printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n"); + if (dsr & DSR_PROGRAM_STATUS) + printk(KERN_NOTICE"DSR.4: (1) Program Error\n"); + if (dsr & DSR_VPPS) + printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation " + "aborted\n"); + if (dsr & DSR_PSS) + printk(KERN_NOTICE"DSR.2: (1) Program suspended\n"); + if (dsr & DSR_DPS) + printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt " + "on locked block\n"); +} +#endif /* __LINUX_MTD_PFOW_H */ diff --git a/kernel/include/linux/mtd/physmap.h b/kernel/include/linux/mtd/physmap.h new file mode 100644 index 000000000..aa6a2633c --- /dev/null +++ b/kernel/include/linux/mtd/physmap.h @@ -0,0 +1,36 @@ +/* + * For boards with physically mapped flash and using + * drivers/mtd/maps/physmap.c mapping driver. + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MTD_PHYSMAP__ +#define __LINUX_MTD_PHYSMAP__ + +#include +#include + +struct map_info; +struct platform_device; + +struct physmap_flash_data { + unsigned int width; + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); + void (*set_vpp)(struct platform_device *, int); + unsigned int nr_parts; + unsigned int pfow_base; + char *probe_type; + struct mtd_partition *parts; + const char * const *part_probe_types; +}; + +#endif /* __LINUX_MTD_PHYSMAP__ */ diff --git a/kernel/include/linux/mtd/pismo.h b/kernel/include/linux/mtd/pismo.h new file mode 100644 index 000000000..8dfb7e142 --- /dev/null +++ b/kernel/include/linux/mtd/pismo.h @@ -0,0 +1,17 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef __LINUX_MTD_PISMO_H +#define __LINUX_MTD_PISMO_H + +struct pismo_pdata { + void (*set_vpp)(void *, int); + void *vpp_data; + phys_addr_t cs_addrs[5]; +}; + +#endif diff --git a/kernel/include/linux/mtd/plat-ram.h b/kernel/include/linux/mtd/plat-ram.h new file mode 100644 index 000000000..44212d65a --- /dev/null +++ b/kernel/include/linux/mtd/plat-ram.h @@ -0,0 +1,34 @@ +/* linux/include/linux/mtd/plat-ram.h + * + * (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks + * + * Generic platform device based RAM map + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_MTD_PLATRAM_H +#define __LINUX_MTD_PLATRAM_H __FILE__ + +#define PLATRAM_RO (0) +#define PLATRAM_RW (1) + +struct platdata_mtd_ram { + const char *mapname; + const char * const *map_probes; + const char * const *probes; + struct mtd_partition *partitions; + int nr_partitions; + int bankwidth; + + /* control callbacks */ + + void (*set_rw)(struct device *dev, int to); +}; + +#endif /* __LINUX_MTD_PLATRAM_H */ diff --git a/kernel/include/linux/mtd/qinfo.h b/kernel/include/linux/mtd/qinfo.h new file mode 100644 index 000000000..7b3d487d8 --- /dev/null +++ b/kernel/include/linux/mtd/qinfo.h @@ -0,0 +1,91 @@ +#ifndef __LINUX_MTD_QINFO_H +#define __LINUX_MTD_QINFO_H + +#include +#include +#include +#include +#include +#include +#include + +/* lpddr_private describes lpddr flash chip in memory map + * @ManufactId - Chip Manufacture ID + * @DevId - Chip Device ID + * @qinfo - pointer to qinfo records describing the chip + * @numchips - number of chips including virual RWW partitions + * @chipshift - Chip/partiton size 2^chipshift + * @chips - per-chip data structure + */ +struct lpddr_private { + uint16_t ManufactId; + uint16_t DevId; + struct qinfo_chip *qinfo; + int numchips; + unsigned long chipshift; + struct flchip chips[0]; +}; + +/* qinfo_query_info structure contains request information for + * each qinfo record + * @major - major number of qinfo record + * @major - minor number of qinfo record + * @id_str - descriptive string to access the record + * @desc - detailed description for the qinfo record + */ +struct qinfo_query_info { + uint8_t major; + uint8_t minor; + char *id_str; + char *desc; +}; + +/* + * qinfo_chip structure contains necessary qinfo records data + * @DevSizeShift - Device size 2^n bytes + * @BufSizeShift - Program buffer size 2^n bytes + * @TotalBlocksNum - Total number of blocks + * @UniformBlockSizeShift - Uniform block size 2^UniformBlockSizeShift bytes + * @HWPartsNum - Number of hardware partitions + * @SuspEraseSupp - Suspend erase supported + * @SingleWordProgTime - Single word program 2^SingleWordProgTime u-sec + * @ProgBufferTime - Program buffer write 2^ProgBufferTime u-sec + * @BlockEraseTime - Block erase 2^BlockEraseTime m-sec + */ +struct qinfo_chip { + /* General device info */ + uint16_t DevSizeShift; + uint16_t BufSizeShift; + /* Erase block information */ + uint16_t TotalBlocksNum; + uint16_t UniformBlockSizeShift; + /* Partition information */ + uint16_t HWPartsNum; + /* Optional features */ + uint16_t SuspEraseSupp; + /* Operation typical time */ + uint16_t SingleWordProgTime; + uint16_t ProgBufferTime; + uint16_t BlockEraseTime; +}; + +/* defines for fixup usage */ +#define LPDDR_MFR_ANY 0xffff +#define LPDDR_ID_ANY 0xffff +#define NUMONYX_MFGR_ID 0x0089 +#define R18_DEVICE_ID_1G 0x893c + +static inline map_word lpddr_build_cmd(u_long cmd, struct map_info *map) +{ + map_word val = { {0} }; + val.x[0] = cmd; + return val; +} + +#define CMD(x) lpddr_build_cmd(x, map) +#define CMDVAL(cmd) cmd.x[0] + +struct mtd_info *lpddr_cmdset(struct map_info *); + +#endif + diff --git a/kernel/include/linux/mtd/sh_flctl.h b/kernel/include/linux/mtd/sh_flctl.h new file mode 100644 index 000000000..1c28f8879 --- /dev/null +++ b/kernel/include/linux/mtd/sh_flctl.h @@ -0,0 +1,192 @@ +/* + * SuperH FLCTL nand controller + * + * Copyright © 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __SH_FLCTL_H__ +#define __SH_FLCTL_H__ + +#include +#include +#include +#include +#include + +/* FLCTL registers */ +#define FLCMNCR(f) (f->reg + 0x0) +#define FLCMDCR(f) (f->reg + 0x4) +#define FLCMCDR(f) (f->reg + 0x8) +#define FLADR(f) (f->reg + 0xC) +#define FLADR2(f) (f->reg + 0x3C) +#define FLDATAR(f) (f->reg + 0x10) +#define FLDTCNTR(f) (f->reg + 0x14) +#define FLINTDMACR(f) (f->reg + 0x18) +#define FLBSYTMR(f) (f->reg + 0x1C) +#define FLBSYCNT(f) (f->reg + 0x20) +#define FLDTFIFO(f) (f->reg + 0x24) +#define FLECFIFO(f) (f->reg + 0x28) +#define FLTRCR(f) (f->reg + 0x2C) +#define FLHOLDCR(f) (f->reg + 0x38) +#define FL4ECCRESULT0(f) (f->reg + 0x80) +#define FL4ECCRESULT1(f) (f->reg + 0x84) +#define FL4ECCRESULT2(f) (f->reg + 0x88) +#define FL4ECCRESULT3(f) (f->reg + 0x8C) +#define FL4ECCCR(f) (f->reg + 0x90) +#define FL4ECCCNT(f) (f->reg + 0x94) +#define FLERRADR(f) (f->reg + 0x98) + +/* FLCMNCR control bits */ +#define _4ECCCNTEN (0x1 << 24) +#define _4ECCEN (0x1 << 23) +#define _4ECCCORRECT (0x1 << 22) +#define SHBUSSEL (0x1 << 20) +#define SEL_16BIT (0x1 << 19) +#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/ +#define QTSEL_E (0x1 << 17) +#define ENDIAN (0x1 << 16) /* 1 = little endian */ +#define FCKSEL_E (0x1 << 15) +#define ACM_SACCES_MODE (0x01 << 10) +#define NANWF_E (0x1 << 9) +#define SE_D (0x1 << 8) /* Spare area disable */ +#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */ +#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */ +#define TYPESEL_SET (0x1 << 0) + +/* + * Clock settings using the PULSEx registers from FLCMNCR + * + * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E + * to control the clock divider used between the High-Speed Peripheral Clock + * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit + * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16 + * bit version the divider is seperate for the pulse width of high and low + * signals. + */ +#define PULSE3 (0x1 << 27) +#define PULSE2 (0x1 << 17) +#define PULSE1 (0x1 << 15) +#define PULSE0 (0x1 << 9) +#define CLK_8B_0_5 PULSE1 +#define CLK_8B_1 0x0 +#define CLK_8B_1_5 (PULSE1 | PULSE2) +#define CLK_8B_2 PULSE0 +#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2) +#define CLK_8B_4 (PULSE0 | PULSE2) +#define CLK_16B_6L_2H PULSE0 +#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2) +#define CLK_16B_12L_4H (PULSE0 | PULSE2) + +/* FLCMDCR control bits */ +#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */ +#define ADRMD_E (0x1 << 26) /* Sector address access */ +#define CDSRC_E (0x1 << 25) /* Data buffer selection */ +#define DOSR_E (0x1 << 24) /* Status read check */ +#define SELRW (0x1 << 21) /* 0:read 1:write */ +#define DOADR_E (0x1 << 20) /* Address stage execute */ +#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */ +#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */ +#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */ +#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */ +#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */ +#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */ + +/* FLINTDMACR control bits */ +#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */ +#define AC1CLR (0x1 << 19) /* ECC FIFO clear */ +#define AC0CLR (0x1 << 18) /* Data FIFO clear */ +#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */ +#define ECERB (0x1 << 9) /* ECC error */ +#define STERB (0x1 << 8) /* Status error */ +#define STERINTE (0x1 << 4) /* Status error enable */ + +/* FLTRCR control bits */ +#define TRSTRT (0x1 << 0) /* translation start */ +#define TREND (0x1 << 1) /* translation end */ + +/* + * FLHOLDCR control bits + * + * HOLDEN: Bus Occupancy Enable (inverted) + * Enable this bit when the external bus might be used in between transfers. + * If not set and the bus gets used by other modules, a deadlock occurs. + */ +#define HOLDEN (0x1 << 0) + +/* FL4ECCCR control bits */ +#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */ +#define _4ECCEND (0x1 << 1) /* 4 symbols end */ +#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */ + +#define LOOP_TIMEOUT_MAX 0x00010000 + +enum flctl_ecc_res_t { + FL_SUCCESS, + FL_REPAIRABLE, + FL_ERROR, + FL_TIMEOUT +}; + +struct dma_chan; + +struct sh_flctl { + struct mtd_info mtd; + struct nand_chip chip; + struct platform_device *pdev; + struct dev_pm_qos_request pm_qos; + void __iomem *reg; + + uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ + int read_bytes; + unsigned int index; + int seqin_column; /* column in SEQIN cmd */ + int seqin_page_addr; /* page_addr in SEQIN cmd */ + uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */ + int erase1_page_addr; /* page_addr in ERASE1 cmd */ + uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */ + uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */ + uint32_t flcmncr_base; /* base value of FLCMNCR */ + uint32_t flintdmacr_base; /* irq enable bits */ + + unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ + unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ + unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ + unsigned qos_request:1; /* QoS request to prevent deep power shutdown */ + + /* DMA related objects */ + struct dma_chan *chan_fifo0_rx; + struct dma_chan *chan_fifo0_tx; + struct completion dma_complete; +}; + +struct sh_flctl_platform_data { + struct mtd_partition *parts; + int nr_parts; + unsigned long flcmncr_val; + + unsigned has_hwecc:1; + unsigned use_holden:1; + + unsigned int slave_id_fifo0_tx; + unsigned int slave_id_fifo0_rx; +}; + +static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) +{ + return container_of(mtdinfo, struct sh_flctl, mtd); +} + +#endif /* __SH_FLCTL_H__ */ diff --git a/kernel/include/linux/mtd/sharpsl.h b/kernel/include/linux/mtd/sharpsl.h new file mode 100644 index 000000000..25f4d2a84 --- /dev/null +++ b/kernel/include/linux/mtd/sharpsl.h @@ -0,0 +1,20 @@ +/* + * SharpSL NAND support + * + * Copyright (C) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +struct sharpsl_nand_platform_data { + struct nand_bbt_descr *badblock_pattern; + struct nand_ecclayout *ecc_layout; + struct mtd_partition *partitions; + unsigned int nr_partitions; +}; diff --git a/kernel/include/linux/mtd/spear_smi.h b/kernel/include/linux/mtd/spear_smi.h new file mode 100644 index 000000000..581603ac1 --- /dev/null +++ b/kernel/include/linux/mtd/spear_smi.h @@ -0,0 +1,65 @@ +/* + * Copyright © 2010 ST Microelectronics + * Shiraz Hashim + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_SPEAR_SMI_H +#define __MTD_SPEAR_SMI_H + +#include +#include +#include +#include +#include + +/* max possible slots for serial-nor flash chip in the SMI controller */ +#define MAX_NUM_FLASH_CHIP 4 + +/* macro to define partitions for flash devices */ +#define DEFINE_PARTS(n, of, s) \ +{ \ + .name = n, \ + .offset = of, \ + .size = s, \ +} + +/** + * struct spear_smi_flash_info - platform structure for passing flash + * information + * + * name: name of the serial nor flash for identification + * mem_base: the memory base on which the flash is mapped + * size: size of the flash in bytes + * partitions: parition details + * nr_partitions: number of partitions + * fast_mode: whether flash supports fast mode + */ + +struct spear_smi_flash_info { + char *name; + unsigned long mem_base; + unsigned long size; + struct mtd_partition *partitions; + int nr_partitions; + u8 fast_mode; +}; + +/** + * struct spear_smi_plat_data - platform structure for configuring smi + * + * clk_rate: clk rate at which SMI must operate + * num_flashes: number of flashes present on board + * board_flash_info: specific details of each flash present on board + */ +struct spear_smi_plat_data { + unsigned long clk_rate; + int num_flashes; + struct spear_smi_flash_info *board_flash_info; + struct device_node *np[MAX_NUM_FLASH_CHIP]; +}; + +#endif /* __MTD_SPEAR_SMI_H */ diff --git a/kernel/include/linux/mtd/spi-nor.h b/kernel/include/linux/mtd/spi-nor.h new file mode 100644 index 000000000..e5409524b --- /dev/null +++ b/kernel/include/linux/mtd/spi-nor.h @@ -0,0 +1,216 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_MTD_SPI_NOR_H +#define __LINUX_MTD_SPI_NOR_H + +/* + * Note on opcode nomenclature: some opcodes have a format like + * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number + * of I/O lines used for the opcode, address, and data (respectively). The + * FUNCTION has an optional suffix of '4', to represent an opcode which + * requires a 4-byte (32-bit) address. + */ + +/* Flash opcodes. */ +#define SPINOR_OP_WREN 0x06 /* Write enable */ +#define SPINOR_OP_RDSR 0x05 /* Read status register */ +#define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ +#define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ +#define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ +#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ +#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ +#define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ +#define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ +#define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ +#define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */ +#define SPINOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */ +#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ +#define SPINOR_OP_RDCR 0x35 /* Read configuration register */ +#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ + +/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ +#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */ +#define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */ +#define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */ +#define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ +#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ + +/* Used for SST flashes only. */ +#define SPINOR_OP_BP 0x02 /* Byte program */ +#define SPINOR_OP_WRDI 0x04 /* Write disable */ +#define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ + +/* Used for Macronix and Winbond flashes. */ +#define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */ +#define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */ + +/* Used for Spansion flashes only. */ +#define SPINOR_OP_BRWR 0x17 /* Bank register write */ + +/* Used for Micron flashes only. */ +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ + +/* Status Register bits. */ +#define SR_WIP 1 /* Write in progress */ +#define SR_WEL 2 /* Write enable latch */ +/* meaning of other SR_* bits may differ between vendors */ +#define SR_BP0 4 /* Block protect 0 */ +#define SR_BP1 8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ + +#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ + +/* Enhanced Volatile Configuration Register bits */ +#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */ + +/* Flag Status Register bits */ +#define FSR_READY 0x80 + +/* Configuration Register bits. */ +#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ + +enum read_mode { + SPI_NOR_NORMAL = 0, + SPI_NOR_FAST, + SPI_NOR_DUAL, + SPI_NOR_QUAD, +}; + +/** + * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer + * @wren: command for "Write Enable", or 0x00 for not required + * @cmd: command for operation + * @cmd_pins: number of pins to send @cmd (1, 2, 4) + * @addr: address for operation + * @addr_pins: number of pins to send @addr (1, 2, 4) + * @addr_width: number of address bytes + * (3,4, or 0 for address not required) + * @mode: mode data + * @mode_pins: number of pins to send @mode (1, 2, 4) + * @mode_cycles: number of mode cycles (0 for mode not required) + * @dummy_cycles: number of dummy cycles (0 for dummy not required) + */ +struct spi_nor_xfer_cfg { + u8 wren; + u8 cmd; + u8 cmd_pins; + u32 addr; + u8 addr_pins; + u8 addr_width; + u8 mode; + u8 mode_pins; + u8 mode_cycles; + u8 dummy_cycles; +}; + +#define SPI_NOR_MAX_CMD_SIZE 8 +enum spi_nor_ops { + SPI_NOR_OPS_READ = 0, + SPI_NOR_OPS_WRITE, + SPI_NOR_OPS_ERASE, + SPI_NOR_OPS_LOCK, + SPI_NOR_OPS_UNLOCK, +}; + +enum spi_nor_option_flags { + SNOR_F_USE_FSR = BIT(0), +}; + +/** + * struct spi_nor - Structure for defining a the SPI NOR layer + * @mtd: point to a mtd_info structure + * @lock: the lock for the read/write/erase/lock/unlock operations + * @dev: point to a spi device, or a spi nor controller device. + * @page_size: the page size of the SPI NOR + * @addr_width: number of address bytes + * @erase_opcode: the opcode for erasing a sector + * @read_opcode: the read opcode + * @read_dummy: the dummy needed by the read operation + * @program_opcode: the program opcode + * @flash_read: the mode of the read + * @sst_write_second: used by the SST write operation + * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @cfg: used by the read_xfer/write_xfer + * @cmd_buf: used by the write_reg + * @prepare: [OPTIONAL] do some preparations for the + * read/write/erase/lock/unlock operations + * @unprepare: [OPTIONAL] do some post work after the + * read/write/erase/lock/unlock operations + * @read_xfer: [OPTIONAL] the read fundamental primitive + * @write_xfer: [OPTIONAL] the writefundamental primitive + * @read_reg: [DRIVER-SPECIFIC] read out the register + * @write_reg: [DRIVER-SPECIFIC] write data to the register + * @read: [DRIVER-SPECIFIC] read data from the SPI NOR + * @write: [DRIVER-SPECIFIC] write data to the SPI NOR + * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR + * at the offset @offs + * @lock: [FLASH-SPECIFIC] lock a region of the SPI NOR + * @unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR + * @priv: the private data + */ +struct spi_nor { + struct mtd_info *mtd; + struct mutex lock; + struct device *dev; + u32 page_size; + u8 addr_width; + u8 erase_opcode; + u8 read_opcode; + u8 read_dummy; + u8 program_opcode; + enum read_mode flash_read; + bool sst_write_second; + u32 flags; + struct spi_nor_xfer_cfg cfg; + u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; + + int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); + void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); + int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int write_enable); + + int (*read)(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *read_buf); + void (*write)(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *write_buf); + int (*erase)(struct spi_nor *nor, loff_t offs); + + int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + + void *priv; +}; + +/** + * spi_nor_scan() - scan the SPI NOR + * @nor: the spi_nor structure + * @name: the chip type name + * @mode: the read mode supported by the driver + * + * The drivers can use this fuction to scan the SPI NOR. + * In the scanning, it will try to get all the necessary information to + * fill the mtd_info{} and the spi_nor{}. + * + * The chip type name can be provided through the @name parameter. + * + * Return: 0 for success, others for failure. + */ +int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode); + +#endif diff --git a/kernel/include/linux/mtd/super.h b/kernel/include/linux/mtd/super.h new file mode 100644 index 000000000..f456230f9 --- /dev/null +++ b/kernel/include/linux/mtd/super.h @@ -0,0 +1,29 @@ +/* MTD-based superblock handling + * + * Copyright © 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __MTD_SUPER_H__ +#define __MTD_SUPER_H__ + +#ifdef __KERNEL__ + +#include +#include +#include + +extern struct dentry *mount_mtd(struct file_system_type *fs_type, int flags, + const char *dev_name, void *data, + int (*fill_super)(struct super_block *, void *, int)); +extern void kill_mtd_super(struct super_block *sb); + + +#endif /* __KERNEL__ */ + +#endif /* __MTD_SUPER_H__ */ diff --git a/kernel/include/linux/mtd/ubi.h b/kernel/include/linux/mtd/ubi.h new file mode 100644 index 000000000..1e271cb55 --- /dev/null +++ b/kernel/include/linux/mtd/ubi.h @@ -0,0 +1,284 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author: Artem Bityutskiy (Битюцкий Артём) + */ + +#ifndef __LINUX_UBI_H__ +#define __LINUX_UBI_H__ + +#include +#include +#include +#include + +/* All voumes/LEBs */ +#define UBI_ALL -1 + +/* + * Maximum number of scatter gather list entries, + * we use only 64 to have a lower memory foot print. + */ +#define UBI_MAX_SG_COUNT 64 + +/* + * enum ubi_open_mode - UBI volume open mode constants. + * + * UBI_READONLY: read-only mode + * UBI_READWRITE: read-write mode + * UBI_EXCLUSIVE: exclusive mode + * UBI_METAONLY: modify only the volume meta-data, + * i.e. the data stored in the volume table, but not in any of volume LEBs. + */ +enum { + UBI_READONLY = 1, + UBI_READWRITE, + UBI_EXCLUSIVE, + UBI_METAONLY +}; + +/** + * struct ubi_volume_info - UBI volume description data structure. + * @vol_id: volume ID + * @ubi_num: UBI device number this volume belongs to + * @size: how many physical eraseblocks are reserved for this volume + * @used_bytes: how many bytes of data this volume contains + * @used_ebs: how many physical eraseblocks of this volume actually contain any + * data + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @corrupted: non-zero if the volume is corrupted (static volumes only) + * @upd_marker: non-zero if the volume has update marker set + * @alignment: volume alignment + * @usable_leb_size: how many bytes are available in logical eraseblocks of + * this volume + * @name_len: volume name length + * @name: volume name + * @cdev: UBI volume character device major and minor numbers + * + * The @corrupted flag is only relevant to static volumes and is always zero + * for dynamic ones. This is because UBI does not care about dynamic volume + * data protection and only cares about protecting static volume data. + * + * The @upd_marker flag is set if the volume update operation was interrupted. + * Before touching the volume data during the update operation, UBI first sets + * the update marker flag for this volume. If the volume update operation was + * further interrupted, the update marker indicates this. If the update marker + * is set, the contents of the volume is certainly damaged and a new volume + * update operation has to be started. + * + * To put it differently, @corrupted and @upd_marker fields have different + * semantics: + * o the @corrupted flag means that this static volume is corrupted for some + * reasons, but not because an interrupted volume update + * o the @upd_marker field means that the volume is damaged because of an + * interrupted update operation. + * + * I.e., the @corrupted flag is never set if the @upd_marker flag is set. + * + * The @used_bytes and @used_ebs fields are only really needed for static + * volumes and contain the number of bytes stored in this static volume and how + * many eraseblock this data occupies. In case of dynamic volumes, the + * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs + * field is equivalent to @size. + * + * In general, logical eraseblock size is a property of the UBI device, not + * of the UBI volume. Indeed, the logical eraseblock size depends on the + * physical eraseblock size and on how much bytes UBI headers consume. But + * because of the volume alignment (@alignment), the usable size of logical + * eraseblocks if a volume may be less. The following equation is true: + * @usable_leb_size = LEB size - (LEB size mod @alignment), + * where LEB size is the logical eraseblock size defined by the UBI device. + * + * The alignment is multiple to the minimal flash input/output unit size or %1 + * if all the available space is used. + * + * To put this differently, alignment may be considered is a way to change + * volume logical eraseblock sizes. + */ +struct ubi_volume_info { + int ubi_num; + int vol_id; + int size; + long long used_bytes; + int used_ebs; + int vol_type; + int corrupted; + int upd_marker; + int alignment; + int usable_leb_size; + int name_len; + const char *name; + dev_t cdev; +}; + +/** + * struct ubi_sgl - UBI scatter gather list data structure. + * @list_pos: current position in @sg[] + * @page_pos: current position in @sg[@list_pos] + * @sg: the scatter gather list itself + * + * ubi_sgl is a wrapper around a scatter list which keeps track of the + * current position in the list and the current list item such that + * it can be used across multiple ubi_leb_read_sg() calls. + */ +struct ubi_sgl { + int list_pos; + int page_pos; + struct scatterlist sg[UBI_MAX_SG_COUNT]; +}; + +/** + * ubi_sgl_init - initialize an UBI scatter gather list data structure. + * @usgl: the UBI scatter gather struct itself + * + * Please note that you still have to use sg_init_table() or any adequate + * function to initialize the unterlaying struct scatterlist. + */ +static inline void ubi_sgl_init(struct ubi_sgl *usgl) +{ + usgl->list_pos = 0; + usgl->page_pos = 0; +} + +/** + * struct ubi_device_info - UBI device description data structure. + * @ubi_num: ubi device number + * @leb_size: logical eraseblock size on this UBI device + * @leb_start: starting offset of logical eraseblocks within physical + * eraseblocks + * @min_io_size: minimal I/O unit size + * @max_write_size: maximum amount of bytes the underlying flash can write at a + * time (MTD write buffer size) + * @ro_mode: if this device is in read-only mode + * @cdev: UBI character device major and minor numbers + * + * Note, @leb_size is the logical eraseblock size offered by the UBI device. + * Volumes of this UBI device may have smaller logical eraseblock size if their + * alignment is not equivalent to %1. + * + * The @max_write_size field describes flash write maximum write unit. For + * example, NOR flash allows for changing individual bytes, so @min_io_size is + * %1. However, it does not mean than NOR flash has to write data byte-by-byte. + * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when + * writing large chunks of data, they write 64-bytes at a time. Obviously, this + * improves write throughput. + * + * Also, the MTD device may have N interleaved (striped) flash chips + * underneath, in which case @min_io_size can be physical min. I/O size of + * single flash chip, while @max_write_size can be N * @min_io_size. + * + * The @max_write_size field is always greater or equivalent to @min_io_size. + * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In + * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND + * page size. + */ +struct ubi_device_info { + int ubi_num; + int leb_size; + int leb_start; + int min_io_size; + int max_write_size; + int ro_mode; + dev_t cdev; +}; + +/* + * Volume notification types. + * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a + * volume was created) + * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached + * or a volume was removed) + * @UBI_VOLUME_RESIZED: a volume has been re-sized + * @UBI_VOLUME_RENAMED: a volume has been re-named + * @UBI_VOLUME_UPDATED: data has been written to a volume + * + * These constants define which type of event has happened when a volume + * notification function is invoked. + */ +enum { + UBI_VOLUME_ADDED, + UBI_VOLUME_REMOVED, + UBI_VOLUME_RESIZED, + UBI_VOLUME_RENAMED, + UBI_VOLUME_UPDATED, +}; + +/* + * struct ubi_notification - UBI notification description structure. + * @di: UBI device description object + * @vi: UBI volume description object + * + * UBI notifiers are called with a pointer to an object of this type. The + * object describes the notification. Namely, it provides a description of the + * UBI device and UBI volume the notification informs about. + */ +struct ubi_notification { + struct ubi_device_info di; + struct ubi_volume_info vi; +}; + +/* UBI descriptor given to users when they open UBI volumes */ +struct ubi_volume_desc; + +int ubi_get_device_info(int ubi_num, struct ubi_device_info *di); +void ubi_get_volume_info(struct ubi_volume_desc *desc, + struct ubi_volume_info *vi); +struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode); +struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name, + int mode); +struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode); + +int ubi_register_volume_notifier(struct notifier_block *nb, + int ignore_existing); +int ubi_unregister_volume_notifier(struct notifier_block *nb); + +void ubi_close_volume(struct ubi_volume_desc *desc); +int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset, + int len, int check); +int ubi_leb_read_sg(struct ubi_volume_desc *desc, int lnum, struct ubi_sgl *sgl, + int offset, int len, int check); +int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf, + int offset, int len); +int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf, + int len); +int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum); +int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum); +int ubi_leb_map(struct ubi_volume_desc *desc, int lnum); +int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum); +int ubi_sync(int ubi_num); +int ubi_flush(int ubi_num, int vol_id, int lnum); + +/* + * This function is the same as the 'ubi_leb_read()' function, but it does not + * provide the checking capability. + */ +static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf, + int offset, int len) +{ + return ubi_leb_read(desc, lnum, buf, offset, len, 0); +} + +/* + * This function is the same as the 'ubi_leb_read_sg()' function, but it does + * not provide the checking capability. + */ +static inline int ubi_read_sg(struct ubi_volume_desc *desc, int lnum, + struct ubi_sgl *sgl, int offset, int len) +{ + return ubi_leb_read_sg(desc, lnum, sgl, offset, len, 0); +} +#endif /* !__LINUX_UBI_H__ */ diff --git a/kernel/include/linux/mtd/xip.h b/kernel/include/linux/mtd/xip.h new file mode 100644 index 000000000..abed4dec5 --- /dev/null +++ b/kernel/include/linux/mtd/xip.h @@ -0,0 +1,99 @@ +/* + * MTD primitives for XIP support + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This XIP support for MTD has been loosely inspired + * by an earlier patch authored by David Woodhouse. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_XIP_H__ +#define __LINUX_MTD_XIP_H__ + + +#ifdef CONFIG_MTD_XIP + +/* + * We really don't want gcc to guess anything. + * We absolutely _need_ proper inlining. + */ +#include + +/* + * Function that are modifying the flash state away from array mode must + * obviously not be running from flash. The __xipram is therefore marking + * those functions so they get relocated to ram. + */ +#define __xipram noinline __attribute__ ((__section__ (".data"))) + +/* + * Each architecture has to provide the following macros. They must access + * the hardware directly and not rely on any other (XIP) functions since they + * won't be available when used (flash not in array mode). + * + * xip_irqpending() + * + * return non zero when any hardware interrupt is pending. + * + * xip_currtime() + * + * return a platform specific time reference to be used with + * xip_elapsed_since(). + * + * xip_elapsed_since(x) + * + * return in usecs the elapsed timebetween now and the reference x as + * returned by xip_currtime(). + * + * note 1: conversion to usec can be approximated, as long as the + * returned value is <= the real elapsed time. + * note 2: this should be able to cope with a few seconds without + * overflowing. + * + * xip_iprefetch() + * + * Macro to fill instruction prefetch + * e.g. a series of nops: asm volatile (".rep 8; nop; .endr"); + */ + +#include + +#ifndef xip_irqpending + +#warning "missing IRQ and timer primitives for XIP MTD support" +#warning "some of the XIP MTD support code will be disabled" +#warning "your system will therefore be unresponsive when writing or erasing flash" + +#define xip_irqpending() (0) +#define xip_currtime() (0) +#define xip_elapsed_since(x) (0) + +#endif + +#ifndef xip_iprefetch +#define xip_iprefetch() do { } while (0) +#endif + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * This should not rely upon standard kernel code. + */ +#ifndef xip_cpu_idle +#define xip_cpu_idle() do { } while (0) +#endif + +#else + +#define __xipram + +#endif /* CONFIG_MTD_XIP */ + +#endif /* __LINUX_MTD_XIP_H__ */ -- cgit 1.2.3-korg