From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/include/linux/edac.h | 785 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 785 insertions(+) create mode 100644 kernel/include/linux/edac.h (limited to 'kernel/include/linux/edac.h') diff --git a/kernel/include/linux/edac.h b/kernel/include/linux/edac.h new file mode 100644 index 000000000..da3b72e95 --- /dev/null +++ b/kernel/include/linux/edac.h @@ -0,0 +1,785 @@ +/* + * Generic EDAC defs + * + * Author: Dave Jiang + * + * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ +#ifndef _LINUX_EDAC_H_ +#define _LINUX_EDAC_H_ + +#include +#include +#include +#include +#include + +struct device; + +#define EDAC_OPSTATE_INVAL -1 +#define EDAC_OPSTATE_POLL 0 +#define EDAC_OPSTATE_NMI 1 +#define EDAC_OPSTATE_INT 2 + +extern int edac_op_state; +extern int edac_err_assert; +extern atomic_t edac_handlers; +extern struct bus_type edac_subsys; + +extern int edac_handler_set(void); +extern void edac_atomic_assert_error(void); +extern struct bus_type *edac_get_sysfs_subsys(void); +extern void edac_put_sysfs_subsys(void); + +enum { + EDAC_REPORTING_ENABLED, + EDAC_REPORTING_DISABLED, + EDAC_REPORTING_FORCE +}; + +extern int edac_report_status; +#ifdef CONFIG_EDAC +static inline int get_edac_report_status(void) +{ + return edac_report_status; +} + +static inline void set_edac_report_status(int new) +{ + edac_report_status = new; +} +#else +static inline int get_edac_report_status(void) +{ + return EDAC_REPORTING_DISABLED; +} + +static inline void set_edac_report_status(int new) +{ +} +#endif + +static inline void opstate_init(void) +{ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_NMI: + break; + default: + edac_op_state = EDAC_OPSTATE_POLL; + } + return; +} + +/* Max length of a DIMM label*/ +#define EDAC_MC_LABEL_LEN 31 + +/* Maximum size of the location string */ +#define LOCATION_SIZE 256 + +/* Defines the maximum number of labels that can be reported */ +#define EDAC_MAX_LABELS 8 + +/* String used to join two or more labels */ +#define OTHER_LABEL " or " + +/** + * enum dev_type - describe the type of memory DRAM chips used at the stick + * @DEV_UNKNOWN: Can't be determined, or MC doesn't support detect it + * @DEV_X1: 1 bit for data + * @DEV_X2: 2 bits for data + * @DEV_X4: 4 bits for data + * @DEV_X8: 8 bits for data + * @DEV_X16: 16 bits for data + * @DEV_X32: 32 bits for data + * @DEV_X64: 64 bits for data + * + * Typical values are x4 and x8. + */ +enum dev_type { + DEV_UNKNOWN = 0, + DEV_X1, + DEV_X2, + DEV_X4, + DEV_X8, + DEV_X16, + DEV_X32, /* Do these parts exist? */ + DEV_X64 /* Do these parts exist? */ +}; + +#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN) +#define DEV_FLAG_X1 BIT(DEV_X1) +#define DEV_FLAG_X2 BIT(DEV_X2) +#define DEV_FLAG_X4 BIT(DEV_X4) +#define DEV_FLAG_X8 BIT(DEV_X8) +#define DEV_FLAG_X16 BIT(DEV_X16) +#define DEV_FLAG_X32 BIT(DEV_X32) +#define DEV_FLAG_X64 BIT(DEV_X64) + +/** + * enum hw_event_mc_err_type - type of the detected error + * + * @HW_EVENT_ERR_CORRECTED: Corrected Error - Indicates that an ECC + * corrected error was detected + * @HW_EVENT_ERR_UNCORRECTED: Uncorrected Error - Indicates an error that + * can't be corrected by ECC, but it is not + * fatal (maybe it is on an unused memory area, + * or the memory controller could recover from + * it for example, by re-trying the operation). + * @HW_EVENT_ERR_FATAL: Fatal Error - Uncorrected error that could not + * be recovered. + */ +enum hw_event_mc_err_type { + HW_EVENT_ERR_CORRECTED, + HW_EVENT_ERR_UNCORRECTED, + HW_EVENT_ERR_FATAL, + HW_EVENT_ERR_INFO, +}; + +static inline char *mc_event_error_type(const unsigned int err_type) +{ + switch (err_type) { + case HW_EVENT_ERR_CORRECTED: + return "Corrected"; + case HW_EVENT_ERR_UNCORRECTED: + return "Uncorrected"; + case HW_EVENT_ERR_FATAL: + return "Fatal"; + default: + case HW_EVENT_ERR_INFO: + return "Info"; + } +} + +/** + * enum mem_type - memory types. For a more detailed reference, please see + * http://en.wikipedia.org/wiki/DRAM + * + * @MEM_EMPTY Empty csrow + * @MEM_RESERVED: Reserved csrow type + * @MEM_UNKNOWN: Unknown csrow type + * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995. + * @MEM_EDO: EDO - Extended data out, used on systems up to 1998. + * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant. + * @MEM_SDR: SDR - Single data rate SDRAM + * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory + * They use 3 pins for chip select: Pins 0 and 2 are + * for rank 0; pins 1 and 3 are for rank 1, if the memory + * is dual-rank. + * @MEM_RDR: Registered SDR SDRAM + * @MEM_DDR: Double data rate SDRAM + * http://en.wikipedia.org/wiki/DDR_SDRAM + * @MEM_RDDR: Registered Double data rate SDRAM + * This is a variant of the DDR memories. + * A registered memory has a buffer inside it, hiding + * part of the memory details to the memory controller. + * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers. + * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F. + * Those memories are labed as "PC2-" instead of "PC" to + * differenciate from DDR. + * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205 + * and JESD206. + * Those memories are accessed per DIMM slot, and not by + * a chip select signal. + * @MEM_RDDR2: Registered DDR2 RAM + * This is a variant of the DDR2 memories. + * @MEM_XDR: Rambus XDR + * It is an evolution of the original RAMBUS memories, + * created to compete with DDR2. Weren't used on any + * x86 arch, but cell_edac PPC memory controller uses it. + * @MEM_DDR3: DDR3 RAM + * @MEM_RDDR3: Registered DDR3 RAM + * This is a variant of the DDR3 memories. + * @MEM_LRDDR3 Load-Reduced DDR3 memory. + * @MEM_DDR4: Unbuffered DDR4 RAM + * @MEM_RDDR4: Registered DDR4 RAM + * This is a variant of the DDR4 memories. + */ +enum mem_type { + MEM_EMPTY = 0, + MEM_RESERVED, + MEM_UNKNOWN, + MEM_FPM, + MEM_EDO, + MEM_BEDO, + MEM_SDR, + MEM_RDR, + MEM_DDR, + MEM_RDDR, + MEM_RMBS, + MEM_DDR2, + MEM_FB_DDR2, + MEM_RDDR2, + MEM_XDR, + MEM_DDR3, + MEM_RDDR3, + MEM_LRDDR3, + MEM_DDR4, + MEM_RDDR4, +}; + +#define MEM_FLAG_EMPTY BIT(MEM_EMPTY) +#define MEM_FLAG_RESERVED BIT(MEM_RESERVED) +#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN) +#define MEM_FLAG_FPM BIT(MEM_FPM) +#define MEM_FLAG_EDO BIT(MEM_EDO) +#define MEM_FLAG_BEDO BIT(MEM_BEDO) +#define MEM_FLAG_SDR BIT(MEM_SDR) +#define MEM_FLAG_RDR BIT(MEM_RDR) +#define MEM_FLAG_DDR BIT(MEM_DDR) +#define MEM_FLAG_RDDR BIT(MEM_RDDR) +#define MEM_FLAG_RMBS BIT(MEM_RMBS) +#define MEM_FLAG_DDR2 BIT(MEM_DDR2) +#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2) +#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2) +#define MEM_FLAG_XDR BIT(MEM_XDR) +#define MEM_FLAG_DDR3 BIT(MEM_DDR3) +#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3) + +/** + * enum edac-type - Error Detection and Correction capabilities and mode + * @EDAC_UNKNOWN: Unknown if ECC is available + * @EDAC_NONE: Doesn't support ECC + * @EDAC_RESERVED: Reserved ECC type + * @EDAC_PARITY: Detects parity errors + * @EDAC_EC: Error Checking - no correction + * @EDAC_SECDED: Single bit error correction, Double detection + * @EDAC_S2ECD2ED: Chipkill x2 devices - do these exist? + * @EDAC_S4ECD4ED: Chipkill x4 devices + * @EDAC_S8ECD8ED: Chipkill x8 devices + * @EDAC_S16ECD16ED: Chipkill x16 devices + */ +enum edac_type { + EDAC_UNKNOWN = 0, + EDAC_NONE, + EDAC_RESERVED, + EDAC_PARITY, + EDAC_EC, + EDAC_SECDED, + EDAC_S2ECD2ED, + EDAC_S4ECD4ED, + EDAC_S8ECD8ED, + EDAC_S16ECD16ED, +}; + +#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) +#define EDAC_FLAG_NONE BIT(EDAC_NONE) +#define EDAC_FLAG_PARITY BIT(EDAC_PARITY) +#define EDAC_FLAG_EC BIT(EDAC_EC) +#define EDAC_FLAG_SECDED BIT(EDAC_SECDED) +#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED) +#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED) +#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) +#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) + +/** + * enum scrub_type - scrubbing capabilities + * @SCRUB_UNKNOWN Unknown if scrubber is available + * @SCRUB_NONE: No scrubber + * @SCRUB_SW_PROG: SW progressive (sequential) scrubbing + * @SCRUB_SW_SRC: Software scrub only errors + * @SCRUB_SW_PROG_SRC: Progressive software scrub from an error + * @SCRUB_SW_TUNABLE: Software scrub frequency is tunable + * @SCRUB_HW_PROG: HW progressive (sequential) scrubbing + * @SCRUB_HW_SRC: Hardware scrub only errors + * @SCRUB_HW_PROG_SRC: Progressive hardware scrub from an error + * SCRUB_HW_TUNABLE: Hardware scrub frequency is tunable + */ +enum scrub_type { + SCRUB_UNKNOWN = 0, + SCRUB_NONE, + SCRUB_SW_PROG, + SCRUB_SW_SRC, + SCRUB_SW_PROG_SRC, + SCRUB_SW_TUNABLE, + SCRUB_HW_PROG, + SCRUB_HW_SRC, + SCRUB_HW_PROG_SRC, + SCRUB_HW_TUNABLE +}; + +#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) +#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC) +#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC) +#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE) +#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG) +#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC) +#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC) +#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE) + +/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */ + +/* EDAC internal operation states */ +#define OP_ALLOC 0x100 +#define OP_RUNNING_POLL 0x201 +#define OP_RUNNING_INTERRUPT 0x202 +#define OP_RUNNING_POLL_INTR 0x203 +#define OP_OFFLINE 0x300 + +/* + * Concepts used at the EDAC subsystem + * + * There are several things to be aware of that aren't at all obvious: + * + * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. + * + * These are some of the many terms that are thrown about that don't always + * mean what people think they mean (Inconceivable!). In the interest of + * creating a common ground for discussion, terms and their definitions + * will be established. + * + * Memory devices: The individual DRAM chips on a memory stick. These + * devices commonly output 4 and 8 bits each (x4, x8). + * Grouping several of these in parallel provides the + * number of bits that the memory controller expects: + * typically 72 bits, in order to provide 64 bits + + * 8 bits of ECC data. + * + * Memory Stick: A printed circuit board that aggregates multiple + * memory devices in parallel. In general, this is the + * Field Replaceable Unit (FRU) which gets replaced, in + * the case of excessive errors. Most often it is also + * called DIMM (Dual Inline Memory Module). + * + * Memory Socket: A physical connector on the motherboard that accepts + * a single memory stick. Also called as "slot" on several + * datasheets. + * + * Channel: A memory controller channel, responsible to communicate + * with a group of DIMMs. Each channel has its own + * independent control (command) and data bus, and can + * be used independently or grouped with other channels. + * + * Branch: It is typically the highest hierarchy on a + * Fully-Buffered DIMM memory controller. + * Typically, it contains two channels. + * Two channels at the same branch can be used in single + * mode or in lockstep mode. + * When lockstep is enabled, the cacheline is doubled, + * but it generally brings some performance penalty. + * Also, it is generally not possible to point to just one + * memory stick when an error occurs, as the error + * correction code is calculated using two DIMMs instead + * of one. Due to that, it is capable of correcting more + * errors than on single mode. + * + * Single-channel: The data accessed by the memory controller is contained + * into one dimm only. E. g. if the data is 64 bits-wide, + * the data flows to the CPU using one 64 bits parallel + * access. + * Typically used with SDR, DDR, DDR2 and DDR3 memories. + * FB-DIMM and RAMBUS use a different concept for channel, + * so this concept doesn't apply there. + * + * Double-channel: The data size accessed by the memory controller is + * interlaced into two dimms, accessed at the same time. + * E. g. if the DIMM is 64 bits-wide (72 bits with ECC), + * the data flows to the CPU using a 128 bits parallel + * access. + * + * Chip-select row: This is the name of the DRAM signal used to select the + * DRAM ranks to be accessed. Common chip-select rows for + * single channel are 64 bits, for dual channel 128 bits. + * It may not be visible by the memory controller, as some + * DIMM types have a memory buffer that can hide direct + * access to it from the Memory Controller. + * + * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. + * Motherboards commonly drive two chip-select pins to + * a memory stick. A single-ranked stick, will occupy + * only one of those rows. The other will be unused. + * + * Double-Ranked stick: A double-ranked stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. + * + * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. + * A double-sided stick has two chip-select rows which + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" + * is irrespective of the memory devices being mounted + * on both sides of the memory stick. + * + * Socket set: All of the memory sticks that are required for + * a single memory access or all of the memory sticks + * spanned by a chip-select row. A single socket set + * has two chip-select rows and if double-sided sticks + * are used these will occupy those chip-select rows. + * + * Bank: This term is avoided because it is unclear when + * needing to distinguish between chip-select rows and + * socket sets. + * + * Controller pages: + * + * Physical pages: + * + * Virtual pages: + * + * + * STRUCTURE ORGANIZATION AND CHOICES + * + * + * + * PS - I enjoyed writing all that about as much as you enjoyed reading it. + */ + +/** + * enum edac_mc_layer - memory controller hierarchy layer + * + * @EDAC_MC_LAYER_BRANCH: memory layer is named "branch" + * @EDAC_MC_LAYER_CHANNEL: memory layer is named "channel" + * @EDAC_MC_LAYER_SLOT: memory layer is named "slot" + * @EDAC_MC_LAYER_CHIP_SELECT: memory layer is named "chip select" + * @EDAC_MC_LAYER_ALL_MEM: memory layout is unknown. All memory is mapped + * as a single memory area. This is used when + * retrieving errors from a firmware driven driver. + * + * This enum is used by the drivers to tell edac_mc_sysfs what name should + * be used when describing a memory stick location. + */ +enum edac_mc_layer_type { + EDAC_MC_LAYER_BRANCH, + EDAC_MC_LAYER_CHANNEL, + EDAC_MC_LAYER_SLOT, + EDAC_MC_LAYER_CHIP_SELECT, + EDAC_MC_LAYER_ALL_MEM, +}; + +/** + * struct edac_mc_layer - describes the memory controller hierarchy + * @layer: layer type + * @size: number of components per layer. For example, + * if the channel layer has two channels, size = 2 + * @is_virt_csrow: This layer is part of the "csrow" when old API + * compatibility mode is enabled. Otherwise, it is + * a channel + */ +struct edac_mc_layer { + enum edac_mc_layer_type type; + unsigned size; + bool is_virt_csrow; +}; + +/* + * Maximum number of layers used by the memory controller to uniquely + * identify a single memory stick. + * NOTE: Changing this constant requires not only to change the constant + * below, but also to change the existing code at the core, as there are + * some code there that are optimized for 3 layers. + */ +#define EDAC_MAX_LAYERS 3 + +/** + * EDAC_DIMM_OFF - Macro responsible to get a pointer offset inside a pointer array + * for the element given by [layer0,layer1,layer2] position + * + * @layers: a struct edac_mc_layer array, describing how many elements + * were allocated for each layer + * @n_layers: Number of layers at the @layers array + * @layer0: layer0 position + * @layer1: layer1 position. Unused if n_layers < 2 + * @layer2: layer2 position. Unused if n_layers < 3 + * + * For 1 layer, this macro returns &var[layer0] - &var + * For 2 layers, this macro is similar to allocate a bi-dimensional array + * and to return "&var[layer0][layer1] - &var" + * For 3 layers, this macro is similar to allocate a tri-dimensional array + * and to return "&var[layer0][layer1][layer2] - &var" + * + * A loop could be used here to make it more generic, but, as we only have + * 3 layers, this is a little faster. + * By design, layers can never be 0 or more than 3. If that ever happens, + * a NULL is returned, causing an OOPS during the memory allocation routine, + * with would point to the developer that he's doing something wrong. + */ +#define EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2) ({ \ + int __i; \ + if ((nlayers) == 1) \ + __i = layer0; \ + else if ((nlayers) == 2) \ + __i = (layer1) + ((layers[1]).size * (layer0)); \ + else if ((nlayers) == 3) \ + __i = (layer2) + ((layers[2]).size * ((layer1) + \ + ((layers[1]).size * (layer0)))); \ + else \ + __i = -EINVAL; \ + __i; \ +}) + +/** + * EDAC_DIMM_PTR - Macro responsible to get a pointer inside a pointer array + * for the element given by [layer0,layer1,layer2] position + * + * @layers: a struct edac_mc_layer array, describing how many elements + * were allocated for each layer + * @var: name of the var where we want to get the pointer + * (like mci->dimms) + * @n_layers: Number of layers at the @layers array + * @layer0: layer0 position + * @layer1: layer1 position. Unused if n_layers < 2 + * @layer2: layer2 position. Unused if n_layers < 3 + * + * For 1 layer, this macro returns &var[layer0] + * For 2 layers, this macro is similar to allocate a bi-dimensional array + * and to return "&var[layer0][layer1]" + * For 3 layers, this macro is similar to allocate a tri-dimensional array + * and to return "&var[layer0][layer1][layer2]" + */ +#define EDAC_DIMM_PTR(layers, var, nlayers, layer0, layer1, layer2) ({ \ + typeof(*var) __p; \ + int ___i = EDAC_DIMM_OFF(layers, nlayers, layer0, layer1, layer2); \ + if (___i < 0) \ + __p = NULL; \ + else \ + __p = (var)[___i]; \ + __p; \ +}) + +struct dimm_info { + struct device dev; + + char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ + + /* Memory location data */ + unsigned location[EDAC_MAX_LAYERS]; + + struct mem_ctl_info *mci; /* the parent */ + + u32 grain; /* granularity of reported error in bytes */ + enum dev_type dtype; /* memory device type */ + enum mem_type mtype; /* memory dimm type */ + enum edac_type edac_mode; /* EDAC mode for this dimm */ + + u32 nr_pages; /* number of pages on this dimm */ + + unsigned csrow, cschannel; /* Points to the old API data */ +}; + +/** + * struct rank_info - contains the information for one DIMM rank + * + * @chan_idx: channel number where the rank is (typically, 0 or 1) + * @ce_count: number of correctable errors for this rank + * @csrow: A pointer to the chip select row structure (the parent + * structure). The location of the rank is given by + * the (csrow->csrow_idx, chan_idx) vector. + * @dimm: A pointer to the DIMM structure, where the DIMM label + * information is stored. + * + * FIXME: Currently, the EDAC core model will assume one DIMM per rank. + * This is a bad assumption, but it makes this patch easier. Later + * patches in this series will fix this issue. + */ +struct rank_info { + int chan_idx; + struct csrow_info *csrow; + struct dimm_info *dimm; + + u32 ce_count; /* Correctable Errors for this csrow */ +}; + +struct csrow_info { + struct device dev; + + /* Used only by edac_mc_find_csrow_by_page() */ + unsigned long first_page; /* first page number in csrow */ + unsigned long last_page; /* last page number in csrow */ + unsigned long page_mask; /* used for interleaving - + * 0UL for non intlv */ + + int csrow_idx; /* the chip-select row */ + + u32 ue_count; /* Uncorrectable Errors for this csrow */ + u32 ce_count; /* Correctable Errors for this csrow */ + + struct mem_ctl_info *mci; /* the parent */ + + /* channel information for this csrow */ + u32 nr_channels; + struct rank_info **channels; +}; + +/* + * struct errcount_attribute - used to store the several error counts + */ +struct errcount_attribute_data { + int n_layers; + int pos[EDAC_MAX_LAYERS]; + int layer0, layer1, layer2; +}; + +/** + * edac_raw_error_desc - Raw error report structure + * @grain: minimum granularity for an error report, in bytes + * @error_count: number of errors of the same type + * @top_layer: top layer of the error (layer[0]) + * @mid_layer: middle layer of the error (layer[1]) + * @low_layer: low layer of the error (layer[2]) + * @page_frame_number: page where the error happened + * @offset_in_page: page offset + * @syndrome: syndrome of the error (or 0 if unknown or if + * the syndrome is not applicable) + * @msg: error message + * @location: location of the error + * @label: label of the affected DIMM(s) + * @other_detail: other driver-specific detail about the error + * @enable_per_layer_report: if false, the error affects all layers + * (typically, a memory controller error) + */ +struct edac_raw_error_desc { + /* + * NOTE: everything before grain won't be cleaned by + * edac_raw_error_desc_clean() + */ + char location[LOCATION_SIZE]; + char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * EDAC_MAX_LABELS]; + long grain; + + /* the vars below and grain will be cleaned on every new error report */ + u16 error_count; + int top_layer; + int mid_layer; + int low_layer; + unsigned long page_frame_number; + unsigned long offset_in_page; + unsigned long syndrome; + const char *msg; + const char *other_detail; + bool enable_per_layer_report; +}; + +/* MEMORY controller information structure + */ +struct mem_ctl_info { + struct device dev; + struct bus_type *bus; + + struct list_head link; /* for global list of mem_ctl_info structs */ + + struct module *owner; /* Module owner of this control struct */ + + unsigned long mtype_cap; /* memory types supported by mc */ + unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */ + unsigned long edac_cap; /* configuration capabilities - this is + * closely related to edac_ctl_cap. The + * difference is that the controller may be + * capable of s4ecd4ed which would be listed + * in edac_ctl_cap, but if channels aren't + * capable of s4ecd4ed then the edac_cap would + * not have that capability. + */ + unsigned long scrub_cap; /* chipset scrub capabilities */ + enum scrub_type scrub_mode; /* current scrub mode */ + + /* Translates sdram memory scrub rate given in bytes/sec to the + internal representation and configures whatever else needs + to be configured. + */ + int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw); + + /* Get the current sdram memory scrub rate from the internal + representation and converts it to the closest matching + bandwidth in bytes/sec. + */ + int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci); + + + /* pointer to edac checking routine */ + void (*edac_check) (struct mem_ctl_info * mci); + + /* + * Remaps memory pages: controller pages to physical pages. + * For most MC's, this will be NULL. + */ + /* FIXME - why not send the phys page to begin with? */ + unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, + unsigned long page); + int mc_idx; + struct csrow_info **csrows; + unsigned nr_csrows, num_cschannel; + + /* + * Memory Controller hierarchy + * + * There are basically two types of memory controller: the ones that + * sees memory sticks ("dimms"), and the ones that sees memory ranks. + * All old memory controllers enumerate memories per rank, but most + * of the recent drivers enumerate memories per DIMM, instead. + * When the memory controller is per rank, csbased is true. + */ + unsigned n_layers; + struct edac_mc_layer *layers; + bool csbased; + + /* + * DIMM info. Will eventually remove the entire csrows_info some day + */ + unsigned tot_dimms; + struct dimm_info **dimms; + + /* + * FIXME - what about controllers on other busses? - IDs must be + * unique. dev pointer should be sufficiently unique, but + * BUS:SLOT.FUNC numbers may not be unique. + */ + struct device *pdev; + const char *mod_name; + const char *mod_ver; + const char *ctl_name; + const char *dev_name; + void *pvt_info; + unsigned long start_time; /* mci load start time (in jiffies) */ + + /* + * drivers shouldn't access those fields directly, as the core + * already handles that. + */ + u32 ce_noinfo_count, ue_noinfo_count; + u32 ue_mc, ce_mc; + u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS]; + + struct completion complete; + + /* Additional top controller level attributes, but specified + * by the low level driver. + * + * Set by the low level driver to provide attributes at the + * controller level. + * An array of structures, NULL terminated + * + * If attributes are desired, then set to array of attributes + * If no attributes are desired, leave NULL + */ + const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes; + + /* work struct for this MC */ + struct delayed_work work; + + /* + * Used to report an error - by being at the global struct + * makes the memory allocated by the EDAC core + */ + struct edac_raw_error_desc error_desc; + + /* the internal state of this controller instance */ + int op_state; + +#ifdef CONFIG_EDAC_DEBUG + struct dentry *debugfs; + u8 fake_inject_layer[EDAC_MAX_LAYERS]; + u32 fake_inject_ue; + u16 fake_inject_count; +#endif +}; + +/* + * Maximum number of memory controllers in the coherent fabric. + */ +#define EDAC_MAX_MCS 16 + +#endif -- cgit 1.2.3-korg