From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/include/linux/bcma/bcma.h | 474 ++++++++++++++ kernel/include/linux/bcma/bcma_driver_chipcommon.h | 699 +++++++++++++++++++++ kernel/include/linux/bcma/bcma_driver_gmac_cmn.h | 94 +++ kernel/include/linux/bcma/bcma_driver_mips.h | 44 ++ kernel/include/linux/bcma/bcma_driver_pci.h | 252 ++++++++ kernel/include/linux/bcma/bcma_driver_pcie2.h | 158 +++++ kernel/include/linux/bcma/bcma_regs.h | 101 +++ kernel/include/linux/bcma/bcma_soc.h | 15 + 8 files changed, 1837 insertions(+) create mode 100644 kernel/include/linux/bcma/bcma.h create mode 100644 kernel/include/linux/bcma/bcma_driver_chipcommon.h create mode 100644 kernel/include/linux/bcma/bcma_driver_gmac_cmn.h create mode 100644 kernel/include/linux/bcma/bcma_driver_mips.h create mode 100644 kernel/include/linux/bcma/bcma_driver_pci.h create mode 100644 kernel/include/linux/bcma/bcma_driver_pcie2.h create mode 100644 kernel/include/linux/bcma/bcma_regs.h create mode 100644 kernel/include/linux/bcma/bcma_soc.h (limited to 'kernel/include/linux/bcma') diff --git a/kernel/include/linux/bcma/bcma.h b/kernel/include/linux/bcma/bcma.h new file mode 100644 index 000000000..e34f90664 --- /dev/null +++ b/kernel/include/linux/bcma/bcma.h @@ -0,0 +1,474 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + +#include +#include + +#include +#include +#include +#include +#include +#include /* SPROM sharing */ + +#include + +struct bcma_device; +struct bcma_bus; + +enum bcma_hosttype { + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, + BCMA_HOSTTYPE_SOC, +}; + +struct bcma_chipinfo { + u16 id; + u8 rev; + u8 pkg; +}; + +struct bcma_boardinfo { + u16 vendor; + u16 type; +}; + +enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, +}; + +struct bcma_host_ops { + u8 (*read8)(struct bcma_device *core, u16 offset); + u16 (*read16)(struct bcma_device *core, u16 offset); + u32 (*read32)(struct bcma_device *core, u16 offset); + void (*write8)(struct bcma_device *core, u16 offset, u8 value); + void (*write16)(struct bcma_device *core, u16 offset, u16 value); + void (*write32)(struct bcma_device *core, u16 offset, u32 value); +#ifdef CONFIG_BCMA_BLOCKIO + void (*block_read)(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif + /* Agent ops */ + u32 (*aread32)(struct bcma_device *core, u16 offset); + void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); +}; + +/* Core manufacturers */ +#define BCMA_MANUF_ARM 0x43B +#define BCMA_MANUF_MIPS 0x4A7 +#define BCMA_MANUF_BCM 0x4BF + +/* Core class values. */ +#define BCMA_CL_SIM 0x0 +#define BCMA_CL_EROM 0x1 +#define BCMA_CL_CORESIGHT 0x9 +#define BCMA_CL_VERIF 0xB +#define BCMA_CL_OPTIMO 0xD +#define BCMA_CL_GEN 0xE +#define BCMA_CL_PRIMECELL 0xF + +/* Core-ID values. */ +#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 +#define BCMA_CORE_NS_PCIEG2 0x501 +#define BCMA_CORE_NS_DMA 0x502 +#define BCMA_CORE_NS_SDIO3 0x503 +#define BCMA_CORE_NS_USB20 0x504 +#define BCMA_CORE_NS_USB30 0x505 +#define BCMA_CORE_NS_A9JTAG 0x506 +#define BCMA_CORE_NS_DDR23 0x507 +#define BCMA_CORE_NS_ROM 0x508 +#define BCMA_CORE_NS_NAND 0x509 +#define BCMA_CORE_NS_QSPI 0x50A +#define BCMA_CORE_NS_CHIPCOMMON_B 0x50B +#define BCMA_CORE_4706_SOC_RAM 0x50E +#define BCMA_CORE_ARMCA9 0x510 +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ +#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC +#define BCMA_CORE_DDR23_PHY 0x5DD +#define BCMA_CORE_INVALID 0x700 +#define BCMA_CORE_CHIPCOMMON 0x800 +#define BCMA_CORE_ILINE20 0x801 +#define BCMA_CORE_SRAM 0x802 +#define BCMA_CORE_SDRAM 0x803 +#define BCMA_CORE_PCI 0x804 +#define BCMA_CORE_MIPS 0x805 +#define BCMA_CORE_ETHERNET 0x806 +#define BCMA_CORE_V90 0x807 +#define BCMA_CORE_USB11_HOSTDEV 0x808 +#define BCMA_CORE_ADSL 0x809 +#define BCMA_CORE_ILINE100 0x80A +#define BCMA_CORE_IPSEC 0x80B +#define BCMA_CORE_UTOPIA 0x80C +#define BCMA_CORE_PCMCIA 0x80D +#define BCMA_CORE_INTERNAL_MEM 0x80E +#define BCMA_CORE_MEMC_SDRAM 0x80F +#define BCMA_CORE_OFDM 0x810 +#define BCMA_CORE_EXTIF 0x811 +#define BCMA_CORE_80211 0x812 +#define BCMA_CORE_PHY_A 0x813 +#define BCMA_CORE_PHY_B 0x814 +#define BCMA_CORE_PHY_G 0x815 +#define BCMA_CORE_MIPS_3302 0x816 +#define BCMA_CORE_USB11_HOST 0x817 +#define BCMA_CORE_USB11_DEV 0x818 +#define BCMA_CORE_USB20_HOST 0x819 +#define BCMA_CORE_USB20_DEV 0x81A +#define BCMA_CORE_SDIO_HOST 0x81B +#define BCMA_CORE_ROBOSWITCH 0x81C +#define BCMA_CORE_PARA_ATA 0x81D +#define BCMA_CORE_SATA_XORDMA 0x81E +#define BCMA_CORE_ETHERNET_GBIT 0x81F +#define BCMA_CORE_PCIE 0x820 +#define BCMA_CORE_PHY_N 0x821 +#define BCMA_CORE_SRAM_CTL 0x822 +#define BCMA_CORE_MINI_MACPHY 0x823 +#define BCMA_CORE_ARM_1176 0x824 +#define BCMA_CORE_ARM_7TDMI 0x825 +#define BCMA_CORE_PHY_LP 0x826 +#define BCMA_CORE_PMU 0x827 +#define BCMA_CORE_PHY_SSN 0x828 +#define BCMA_CORE_SDIO_DEV 0x829 +#define BCMA_CORE_ARM_CM3 0x82A +#define BCMA_CORE_PHY_HT 0x82B +#define BCMA_CORE_MIPS_74K 0x82C +#define BCMA_CORE_MAC_GBIT 0x82D +#define BCMA_CORE_DDR12_MEM_CTL 0x82E +#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */ +#define BCMA_CORE_OCP_OCP_BRIDGE 0x830 +#define BCMA_CORE_SHARED_COMMON 0x831 +#define BCMA_CORE_OCP_AHB_BRIDGE 0x832 +#define BCMA_CORE_SPI_HOST 0x833 +#define BCMA_CORE_I2S 0x834 +#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ +#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E +#define BCMA_CORE_DEFAULT 0xFFF + +#define BCMA_MAX_NR_CORES 16 + +/* Chip IDs of PCIe devices */ +#define BCMA_CHIP_ID_BCM4313 0x4313 +#define BCMA_CHIP_ID_BCM43142 43142 +#define BCMA_CHIP_ID_BCM43131 43131 +#define BCMA_CHIP_ID_BCM43217 43217 +#define BCMA_CHIP_ID_BCM43222 43222 +#define BCMA_CHIP_ID_BCM43224 43224 +#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 +#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +#define BCMA_CHIP_ID_BCM43225 43225 +#define BCMA_CHIP_ID_BCM43227 43227 +#define BCMA_CHIP_ID_BCM43228 43228 +#define BCMA_CHIP_ID_BCM43421 43421 +#define BCMA_CHIP_ID_BCM43428 43428 +#define BCMA_CHIP_ID_BCM43431 43431 +#define BCMA_CHIP_ID_BCM43460 43460 +#define BCMA_CHIP_ID_BCM4331 0x4331 +#define BCMA_CHIP_ID_BCM6362 0x6362 +#define BCMA_CHIP_ID_BCM4360 0x4360 +#define BCMA_CHIP_ID_BCM4352 0x4352 + +/* Chip IDs of SoCs */ +#define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_PKG_ID_BCM4706L 1 +#define BCMA_CHIP_ID_BCM4716 0x4716 +#define BCMA_PKG_ID_BCM4716 8 +#define BCMA_PKG_ID_BCM4717 9 +#define BCMA_PKG_ID_BCM4718 10 +#define BCMA_CHIP_ID_BCM47162 47162 +#define BCMA_CHIP_ID_BCM4748 0x4748 +#define BCMA_CHIP_ID_BCM4749 0x4749 +#define BCMA_CHIP_ID_BCM5356 0x5356 +#define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_PKG_ID_BCM5358 9 +#define BCMA_PKG_ID_BCM47186 10 +#define BCMA_PKG_ID_BCM5357 11 +#define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 +#define BCMA_CHIP_ID_BCM4707 53010 +#define BCMA_PKG_ID_BCM4707 1 +#define BCMA_PKG_ID_BCM4708 2 +#define BCMA_PKG_ID_BCM4709 0 +#define BCMA_CHIP_ID_BCM53018 53018 + +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ +#define BCMA_BOARD_TYPE_BCM94313BU 0X050F +#define BCMA_BOARD_TYPE_BCM94313HM 0X0510 +#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511 +#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C +/* BCM4716 */ +#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD +/* BCM43224 */ +#define BCMA_BOARD_TYPE_BCM943224X21 0X056E +#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1 +#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9 +#define BCMA_BOARD_TYPE_BCM943224M93 0X008B +#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090 +#define BCMA_BOARD_TYPE_BCM943224X16 0X0093 +#define BCMA_BOARD_TYPE_BCM94322X9 0X008D +#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E +/* BCM43228 */ +#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540 +#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541 +#define BCMA_BOARD_TYPE_BCM943228BU 0X0542 +#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543 +#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544 +#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545 +#define BCMA_BOARD_TYPE_BCM943228SD 0X0573 +/* BCM4331 */ +#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6 +#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4 +#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E +#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4 +#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC +#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED +#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF +#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF +#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5 +#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4 +#define BCMA_BOARD_TYPE_BCM94331BU 0X0523 +#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524 +#define BCMA_BOARD_TYPE_BCM94331MC 0X0525 +#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526 +#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527 +#define BCMA_BOARD_TYPE_BCM94331HM 0X0574 +#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B +#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9 +#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6 +#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA +/* BCM53572 */ +#define BCMA_BOARD_TYPE_BCM953572BU 0X058D +#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E +#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F +#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 +/* BCM43142 */ +#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 + +struct bcma_device { + struct bcma_bus *bus; + struct bcma_device_id id; + + struct device dev; + struct device *dma_dev; + + unsigned int irq; + bool dev_registered; + + u8 core_index; + u8 core_unit; + + u32 addr; + u32 addr_s[8]; + u32 wrap; + + void __iomem *io_addr; + void __iomem *io_wrap; + + void *drvdata; + struct list_head list; +}; + +static inline void *bcma_get_drvdata(struct bcma_device *core) +{ + return core->drvdata; +} +static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata) +{ + core->drvdata = drvdata; +} + +struct bcma_driver { + const char *name; + const struct bcma_device_id *id_table; + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); + int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + + struct device_driver drv; +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +#define bcma_driver_register(drv) \ + __bcma_driver_register(drv, THIS_MODULE) + +extern void bcma_driver_unregister(struct bcma_driver *drv); + +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int bcma_arch_register_fallback_sprom( + int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)); + +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct bcma_host_ops *ops; + + enum bcma_hosttype hosttype; + bool host_is_pcie2; /* Used for BCMA_HOSTTYPE_PCI only */ + union { + /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */ + struct pci_dev *host_pci; + /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ + struct sdio_func *host_sdio; + /* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */ + struct platform_device *host_pdev; + }; + + struct bcma_chipinfo chipinfo; + + struct bcma_boardinfo boardinfo; + + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; + u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_cc_b drv_cc_b; + struct bcma_drv_pci drv_pci[2]; + struct bcma_drv_pcie2 drv_pcie2; + struct bcma_drv_mips drv_mips; + struct bcma_drv_gmac_cmn drv_gmac_cmn; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; +}; + +static inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} +static inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} +static inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} +static inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} +static inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} +static inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +#ifdef CONFIG_BCMA_BLOCKIO +static inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} +static inline void bcma_block_write(struct bcma_device *core, + const void *buffer, size_t count, + u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif +static inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} +static inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + +static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask) +{ + bcma_write32(cc, offset, bcma_read32(cc, offset) & mask); +} +static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set) +{ + bcma_write32(cc, offset, bcma_read32(cc, offset) | set); +} +static inline void bcma_maskset32(struct bcma_device *cc, + u16 offset, u32 mask, u32 set) +{ + bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set); +} +static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask) +{ + bcma_write16(cc, offset, bcma_read16(cc, offset) & mask); +} +static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set) +{ + bcma_write16(cc, offset, bcma_read16(cc, offset) | set); +} +static inline void bcma_maskset16(struct bcma_device *cc, + u16 offset, u16 mask, u16 set) +{ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + +extern struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, + u8 unit); +static inline struct bcma_device *bcma_find_core(struct bcma_bus *bus, + u16 coreid) +{ + return bcma_find_core_unit(bus, coreid, 0); +} + +#ifdef CONFIG_BCMA_HOST_PCI +extern void bcma_host_pci_up(struct bcma_bus *bus); +extern void bcma_host_pci_down(struct bcma_bus *bus); +extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus, + struct bcma_device *core, bool enable); +#else +static inline void bcma_host_pci_up(struct bcma_bus *bus) +{ +} +static inline void bcma_host_pci_down(struct bcma_bus *bus) +{ +} +static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus, + struct bcma_device *core, bool enable) +{ + if (bus->hosttype == BCMA_HOSTTYPE_PCI) + return -ENOTSUPP; + return 0; +} +#endif + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); +extern void bcma_core_set_clockmode(struct bcma_device *core, + enum bcma_clkmode clkmode); +extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, + bool on); +extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset); +#define BCMA_DMA_TRANSLATION_MASK 0xC0000000 +#define BCMA_DMA_TRANSLATION_NONE 0x00000000 +#define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */ +#define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */ +extern u32 bcma_core_dma_translation(struct bcma_device *core); + +extern unsigned int bcma_core_irq(struct bcma_device *core, int num); + +#endif /* LINUX_BCMA_H_ */ diff --git a/kernel/include/linux/bcma/bcma_driver_chipcommon.h b/kernel/include/linux/bcma/bcma_driver_chipcommon.h new file mode 100644 index 000000000..6cceedf65 --- /dev/null +++ b/kernel/include/linux/bcma/bcma_driver_chipcommon.h @@ -0,0 +1,699 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + +#include +#include + +/** ChipCommon core registers. **/ +#define BCMA_CC_ID 0x0000 +#define BCMA_CC_ID_ID 0x0000FFFF +#define BCMA_CC_ID_ID_SHIFT 0 +#define BCMA_CC_ID_REV 0x000F0000 +#define BCMA_CC_ID_REV_SHIFT 16 +#define BCMA_CC_ID_PKG 0x00F00000 +#define BCMA_CC_ID_PKG_SHIFT 20 +#define BCMA_CC_ID_NRCORES 0x0F000000 +#define BCMA_CC_ID_NRCORES_SHIFT 24 +#define BCMA_CC_ID_TYPE 0xF0000000 +#define BCMA_CC_ID_TYPE_SHIFT 28 +#define BCMA_CC_CAP 0x0004 /* Capabilities */ +#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ +#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 +#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ +#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ +#define BCMA_CC_CAP_OTPS_SHIFT 19 +#define BCMA_CC_CAP_OTPS_BASE 5 +#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ +#define BCMA_CC_CORECTL 0x0008 +#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define BCMA_CC_BIST 0x000C +#define BCMA_CC_OTPS 0x0010 /* OTP status */ +#define BCMA_CC_OTPS_PROGFAIL 0x80000000 +#define BCMA_CC_OTPS_PROTECT 0x00000007 +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ +#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 +#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +#define BCMA_CC_OTPC_PRW_SHIFT 8 +#define BCMA_CC_OTPC_MAXFAIL 0x00000038 +#define BCMA_CC_OTPC_VSEL 0x00000006 +#define BCMA_CC_OTPC_SELVL 0x00000001 +#define BCMA_CC_OTPP 0x0018 /* OTP prog */ +#define BCMA_CC_OTPP_COL 0x000000FF +#define BCMA_CC_OTPP_ROW 0x0000FF00 +#define BCMA_CC_OTPP_ROW_SHIFT 8 +#define BCMA_CC_OTPP_READERR 0x10000000 +#define BCMA_CC_OTPP_VALUE 0x20000000 +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_OTPL 0x001C /* OTP layout */ +#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001 +#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002 +#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004 +#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008 +#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010 +#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020 +#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ +#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ +#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ +#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ +#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ +#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ +#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 +#define BCMA_CC_JCMD_PAUSE 0x40000000 +#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 +#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD0_ACC_DR 0x00001000 +#define BCMA_CC_JCMD0_ACC_IR 0x00002000 +#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 +#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 +#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 +#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 +#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD_ACC_DR 0x00010000 +#define BCMA_CC_JCMD_ACC_IR 0x00020000 +#define BCMA_CC_JCMD_ACC_RESET 0x00030000 +#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 +#define BCMA_CC_JCMD_ACC_PDR 0x00050000 +#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 +#define BCMA_CC_JCMD_IRW_SHIFT 8 +#define BCMA_CC_JCMD_DRW_MASK 0x0000003F +#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ +#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ +#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ +#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ +#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ +#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ +#define BCMA_CC_FLASHCTL 0x0040 +/* Start/busy bit in flashcontrol */ +#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff +#define BCMA_CC_FLASHCTL_ACTION 0x00000700 +#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ +#define BCMA_CC_FLASHCTL_START 0x80000000 +#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +/* Flashcontrol action + opcodes for ST flashes */ +#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ +#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ +#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ +#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ +#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +/* Flashcontrol action + opcodes for Atmel flashes */ +#define BCMA_CC_FLASHCTL_AT_READ 0x07e8 +#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 +#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 +#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 +#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 +#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 +#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 +#define BCMA_CC_FLASHADDR 0x0044 +#define BCMA_CC_FLASHDATA 0x0048 +/* Status register bits for ST flashes */ +#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ +#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ +#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ +#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 +#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ +/* Status register bits for Atmel flashes */ +#define BCMA_CC_FLASHDATA_AT_READY 0x80 +#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 +#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 +#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 +#define BCMA_CC_BCAST_ADDR 0x0050 +#define BCMA_CC_BCAST_DATA 0x0054 +#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ +#define BCMA_CC_GPIOIN 0x0060 +#define BCMA_CC_GPIOOUT 0x0064 +#define BCMA_CC_GPIOOUTEN 0x0068 +#define BCMA_CC_GPIOCTL 0x006C +#define BCMA_CC_GPIOPOL 0x0070 +#define BCMA_CC_GPIOIRQ 0x0074 +#define BCMA_CC_WATCHDOG 0x0080 +#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF +#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 +#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 +#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 +#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define BCMA_CC_CLOCK_N 0x0090 +#define BCMA_CC_CLOCK_SB 0x0094 +#define BCMA_CC_CLOCK_PCI 0x0098 +#define BCMA_CC_CLOCK_M2 0x009C +#define BCMA_CC_CLOCK_MIPS 0x00A0 +#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 +#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 +#define BCMA_CC_CLKDIV_OTP 0x000F0000 +#define BCMA_CC_CLKDIV_OTP_SHIFT 16 +#define BCMA_CC_CLKDIV_JTAG 0x00000F00 +#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 +#define BCMA_CC_CLKDIV_UART 0x000000FF +#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ +#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define BCMA_CC_EROM 0x00FC +#define BCMA_CC_PCMCIA_CFG 0x0100 +#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 +#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 +#define BCMA_CC_PCMCIA_IOWAIT 0x010C +#define BCMA_CC_IDE_CFG 0x0110 +#define BCMA_CC_IDE_MEMWAIT 0x0114 +#define BCMA_CC_IDE_ATTRWAIT 0x0118 +#define BCMA_CC_IDE_IOWAIT 0x011C +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_SROM_CONTROL 0x0190 +#define BCMA_CC_SROM_CONTROL_START 0x80000000 +#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 +#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 +#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 +#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 +#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 +#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 +#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 +#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 +#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 +#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 +#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 +#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 +#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 +#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* Block 0x140 - 0x190 registers are chipset specific */ +#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */ +#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff +#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */ +#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */ +#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */ +#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0 +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */ +#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */ +/* NAND flash registers for BCM4706 (corerev = 31) */ +#define BCMA_CC_NFLASH_CTL 0x01A0 +#define BCMA_CC_NFLASH_CTL_ERR 0x08000000 +#define BCMA_CC_NFLASH_CONF 0x01A4 +#define BCMA_CC_NFLASH_COL_ADDR 0x01A8 +#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC +#define BCMA_CC_NFLASH_DATA 0x01B0 +#define BCMA_CC_NFLASH_WAITCNT0 0x01B4 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 +#define BCMA_CC_UART0_IMR 0x0304 +#define BCMA_CC_UART0_FCR 0x0308 +#define BCMA_CC_UART0_LCR 0x030C +#define BCMA_CC_UART0_MCR 0x0310 +#define BCMA_CC_UART0_LSR 0x0314 +#define BCMA_CC_UART0_MSR 0x0318 +#define BCMA_CC_UART0_SCRATCH 0x031C +#define BCMA_CC_UART1_DATA 0x0400 +#define BCMA_CC_UART1_IMR 0x0404 +#define BCMA_CC_UART1_FCR 0x0408 +#define BCMA_CC_UART1_LCR 0x040C +#define BCMA_CC_UART1_MCR 0x0410 +#define BCMA_CC_UART1_LSR 0x0414 +#define BCMA_CC_UART1_MSR 0x0418 +#define BCMA_CC_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ +#define BCMA_CC_PMU_CTL_RES_SHIFT 13 +#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ +#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 +#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ +#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 +#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 +#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ +#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ +#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define BCMA_CC_CHIPCTL_ADDR 0x0650 +#define BCMA_CC_CHIPCTL_DATA 0x0654 +#define BCMA_CC_REGCTL_ADDR 0x0658 +#define BCMA_CC_REGCTL_DATA 0x065C +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ +#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ +#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 +#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +/* NAND flash MLC controller registers (corerev >= 38) */ +#define BCMA_CC_NAND_REVISION 0x0C00 +#define BCMA_CC_NAND_CMD_START 0x0C04 +#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08 +#define BCMA_CC_NAND_CMD_ADDR 0x0C0C +#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10 +#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14 +#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18 +#define BCMA_CC_NAND_SPARE_RD0 0x0C20 +#define BCMA_CC_NAND_SPARE_RD4 0x0C24 +#define BCMA_CC_NAND_SPARE_RD8 0x0C28 +#define BCMA_CC_NAND_SPARE_RD12 0x0C2C +#define BCMA_CC_NAND_SPARE_WR0 0x0C30 +#define BCMA_CC_NAND_SPARE_WR4 0x0C34 +#define BCMA_CC_NAND_SPARE_WR8 0x0C38 +#define BCMA_CC_NAND_SPARE_WR12 0x0C3C +#define BCMA_CC_NAND_ACC_CONTROL 0x0C40 +#define BCMA_CC_NAND_CONFIG 0x0C48 +#define BCMA_CC_NAND_TIMING_1 0x0C50 +#define BCMA_CC_NAND_TIMING_2 0x0C54 +#define BCMA_CC_NAND_SEMAPHORE 0x0C58 +#define BCMA_CC_NAND_DEVID 0x0C60 +#define BCMA_CC_NAND_DEVID_X 0x0C64 +#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68 +#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C +#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70 +#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74 +#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78 +#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C +#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80 +#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84 +#define BCMA_CC_NAND_READ_ADDR_X 0x0C90 +#define BCMA_CC_NAND_READ_ADDR 0x0C94 +#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98 +#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C +#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0 +#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4 +#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8 +#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC +#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0 +#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4 +#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0 +#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0 +#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4 +#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8 +#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC +#define BCMA_CC_NAND_SPARE_RD16 0x0D30 +#define BCMA_CC_NAND_SPARE_RD20 0x0D34 +#define BCMA_CC_NAND_SPARE_RD24 0x0D38 +#define BCMA_CC_NAND_SPARE_RD28 0x0D3C +#define BCMA_CC_NAND_CACHE_ADDR 0x0D40 +#define BCMA_CC_NAND_CACHE_DATA 0x0D44 +#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48 +#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 +#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ +#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 +#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 +#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 +#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 +#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 + +/* PMU rev 15 */ +#define BCMA_CC_PMU15_PLL_PLLCTL0 0 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 +#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC +#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 +#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 +#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 +#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 +#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 +#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 + +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f + +#define BCMA_CC_PMU_PLL_CTL0 0 +#define BCMA_CC_PMU_PLL_CTL1 1 +#define BCMA_CC_PMU_PLL_CTL2 2 +#define BCMA_CC_PMU_PLL_CTL3 3 +#define BCMA_CC_PMU_PLL_CTL4 4 +#define BCMA_CC_PMU_PLL_CTL5 5 + +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 +#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 + +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 +#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 + +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + +/* 43224 chip-specific ChipControl register bits */ +#define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ +#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ +#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ + +/* 4313 Chip specific ChipControl register bits */ +#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + +/* BCM5357 ChipControl register bits */ +#define BCMA_CHIPCTL_5357_EXTPA BIT(14) +#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15) +#define BCMA_CHIPCTL_5357_NFLASH BIT(16) +#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) +#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) + +#define BCMA_RES_4314_LPLDO_PU BIT(0) +#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) +#define BCMA_RES_4314_PMU_BG_PU BIT(2) +#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) +#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) +#define BCMA_RES_4314_CLDO_PU BIT(5) +#define BCMA_RES_4314_LPLDO2_LVM BIT(6) +#define BCMA_RES_4314_WL_PMU_PU BIT(7) +#define BCMA_RES_4314_LNLDO_PU BIT(8) +#define BCMA_RES_4314_LDO3P3_PU BIT(9) +#define BCMA_RES_4314_OTP_PU BIT(10) +#define BCMA_RES_4314_XTAL_PU BIT(11) +#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) +#define BCMA_RES_4314_LQ_AVAIL BIT(13) +#define BCMA_RES_4314_LOGIC_RET BIT(14) +#define BCMA_RES_4314_MEM_SLEEP BIT(15) +#define BCMA_RES_4314_MACPHY_RET BIT(16) +#define BCMA_RES_4314_WL_CORE_READY BIT(17) +#define BCMA_RES_4314_ILP_REQ BIT(18) +#define BCMA_RES_4314_ALP_AVAIL BIT(19) +#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) +#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) +#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) +#define BCMA_RES_4314_RADIO_PU BIT(23) +#define BCMA_RES_4314_VCO_LDO_PU BIT(24) +#define BCMA_RES_4314_AFE_LDO_PU BIT(25) +#define BCMA_RES_4314_RX_LDO_PU BIT(26) +#define BCMA_RES_4314_TX_LDO_PU BIT(27) +#define BCMA_RES_4314_HT_AVAIL BIT(28) +#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) + +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +struct bcma_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + bool present; + u8 buswidth; + u32 window; + u32 window_size; +}; + +#ifdef CONFIG_BCMA_SFLASH +struct bcma_sflash { + bool present; + u32 window; + u32 blocksize; + u16 numblocks; + u32 size; + + struct mtd_info *mtd; + void *priv; +}; +#endif + +#ifdef CONFIG_BCMA_NFLASH +struct mtd_info; + +struct bcma_nflash { + bool present; + bool boot; /* This is the flash the SoC boots from */ + + struct mtd_info *mtd; +}; +#endif + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; + u8 setup_done:1; + u8 early_setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; +#ifdef CONFIG_BCMA_SFLASH + struct bcma_sflash sflash; +#endif +#ifdef CONFIG_BCMA_NFLASH + struct bcma_nflash nflash; +#endif + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + u32 ticks_per_ms; + struct platform_device *watchdog; + + /* Lock for GPIO register access. */ + spinlock_t gpio_lock; +#ifdef CONFIG_BCMA_DRIVER_GPIO + struct gpio_chip gpio; + struct irq_domain *irq_domain; +#endif +}; + +struct bcma_drv_cc_b { + struct bcma_device *core; + u8 setup_done:1; + void __iomem *mii; +}; + +/* Register access */ +#define bcma_cc_read32(cc, offset) \ + bcma_read32((cc)->core, offset) +#define bcma_cc_write32(cc, offset, val) \ + bcma_write32((cc)->core, offset, val) + +#define bcma_cc_mask32(cc, offset, mask) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) +#define bcma_cc_set32(cc, offset, set) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) +#define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); + +extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); + +/* PMU support */ +extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, + u32 mask, u32 set); +extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); + +extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); + +void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value); + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/kernel/include/linux/bcma/bcma_driver_gmac_cmn.h b/kernel/include/linux/bcma/bcma_driver_gmac_cmn.h new file mode 100644 index 000000000..4354d4ea6 --- /dev/null +++ b/kernel/include/linux/bcma/bcma_driver_gmac_cmn.h @@ -0,0 +1,94 @@ +#ifndef LINUX_BCMA_DRIVER_GMAC_CMN_H_ +#define LINUX_BCMA_DRIVER_GMAC_CMN_H_ + +#include + +#define BCMA_GMAC_CMN_STAG0 0x000 +#define BCMA_GMAC_CMN_STAG1 0x004 +#define BCMA_GMAC_CMN_STAG2 0x008 +#define BCMA_GMAC_CMN_STAG3 0x00C +#define BCMA_GMAC_CMN_PARSER_CTL 0x020 +#define BCMA_GMAC_CMN_MIB_MAX_LEN 0x024 +#define BCMA_GMAC_CMN_PHY_ACCESS 0x100 +#define BCMA_GMAC_CMN_PA_DATA_MASK 0x0000ffff +#define BCMA_GMAC_CMN_PA_ADDR_MASK 0x001f0000 +#define BCMA_GMAC_CMN_PA_ADDR_SHIFT 16 +#define BCMA_GMAC_CMN_PA_REG_MASK 0x1f000000 +#define BCMA_GMAC_CMN_PA_REG_SHIFT 24 +#define BCMA_GMAC_CMN_PA_WRITE 0x20000000 +#define BCMA_GMAC_CMN_PA_START 0x40000000 +#define BCMA_GMAC_CMN_PHY_CTL 0x104 +#define BCMA_GMAC_CMN_PC_EPA_MASK 0x0000001f +#define BCMA_GMAC_CMN_PC_MCT_MASK 0x007f0000 +#define BCMA_GMAC_CMN_PC_MCT_SHIFT 16 +#define BCMA_GMAC_CMN_PC_MTE 0x00800000 +#define BCMA_GMAC_CMN_GMAC0_RGMII_CTL 0x110 +#define BCMA_GMAC_CMN_CFP_ACCESS 0x200 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA0 0x210 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA1 0x214 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA2 0x218 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA3 0x21C +#define BCMA_GMAC_CMN_CFP_TCAM_DATA4 0x220 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA5 0x224 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA6 0x228 +#define BCMA_GMAC_CMN_CFP_TCAM_DATA7 0x22C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK0 0x230 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK1 0x234 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK2 0x238 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK3 0x23C +#define BCMA_GMAC_CMN_CFP_TCAM_MASK4 0x240 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK5 0x244 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK6 0x248 +#define BCMA_GMAC_CMN_CFP_TCAM_MASK7 0x24C +#define BCMA_GMAC_CMN_CFP_ACTION_DATA 0x250 +#define BCMA_GMAC_CMN_TCAM_BIST_CTL 0x2A0 +#define BCMA_GMAC_CMN_TCAM_BIST_STATUS 0x2A4 +#define BCMA_GMAC_CMN_TCAM_CMP_STATUS 0x2A8 +#define BCMA_GMAC_CMN_TCAM_DISABLE 0x2AC +#define BCMA_GMAC_CMN_TCAM_TEST_CTL 0x2F0 +#define BCMA_GMAC_CMN_UDF_0_A3_A0 0x300 +#define BCMA_GMAC_CMN_UDF_0_A7_A4 0x304 +#define BCMA_GMAC_CMN_UDF_0_A8 0x308 +#define BCMA_GMAC_CMN_UDF_1_A3_A0 0x310 +#define BCMA_GMAC_CMN_UDF_1_A7_A4 0x314 +#define BCMA_GMAC_CMN_UDF_1_A8 0x318 +#define BCMA_GMAC_CMN_UDF_2_A3_A0 0x320 +#define BCMA_GMAC_CMN_UDF_2_A7_A4 0x324 +#define BCMA_GMAC_CMN_UDF_2_A8 0x328 +#define BCMA_GMAC_CMN_UDF_0_B3_B0 0x330 +#define BCMA_GMAC_CMN_UDF_0_B7_B4 0x334 +#define BCMA_GMAC_CMN_UDF_0_B8 0x338 +#define BCMA_GMAC_CMN_UDF_1_B3_B0 0x340 +#define BCMA_GMAC_CMN_UDF_1_B7_B4 0x344 +#define BCMA_GMAC_CMN_UDF_1_B8 0x348 +#define BCMA_GMAC_CMN_UDF_2_B3_B0 0x350 +#define BCMA_GMAC_CMN_UDF_2_B7_B4 0x354 +#define BCMA_GMAC_CMN_UDF_2_B8 0x358 +#define BCMA_GMAC_CMN_UDF_0_C3_C0 0x360 +#define BCMA_GMAC_CMN_UDF_0_C7_C4 0x364 +#define BCMA_GMAC_CMN_UDF_0_C8 0x368 +#define BCMA_GMAC_CMN_UDF_1_C3_C0 0x370 +#define BCMA_GMAC_CMN_UDF_1_C7_C4 0x374 +#define BCMA_GMAC_CMN_UDF_1_C8 0x378 +#define BCMA_GMAC_CMN_UDF_2_C3_C0 0x380 +#define BCMA_GMAC_CMN_UDF_2_C7_C4 0x384 +#define BCMA_GMAC_CMN_UDF_2_C8 0x388 +#define BCMA_GMAC_CMN_UDF_0_D3_D0 0x390 +#define BCMA_GMAC_CMN_UDF_0_D7_D4 0x394 +#define BCMA_GMAC_CMN_UDF_0_D11_D8 0x394 + +struct bcma_drv_gmac_cmn { + struct bcma_device *core; + + /* Drivers accessing BCMA_GMAC_CMN_PHY_ACCESS and + * BCMA_GMAC_CMN_PHY_CTL need to take that mutex first. */ + struct mutex phy_mutex; +}; + +/* Register access */ +#define gmac_cmn_read16(gc, offset) bcma_read16((gc)->core, offset) +#define gmac_cmn_read32(gc, offset) bcma_read32((gc)->core, offset) +#define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) +#define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) + +#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ diff --git a/kernel/include/linux/bcma/bcma_driver_mips.h b/kernel/include/linux/bcma/bcma_driver_mips.h new file mode 100644 index 000000000..8eea7f9e3 --- /dev/null +++ b/kernel/include/linux/bcma/bcma_driver_mips.h @@ -0,0 +1,44 @@ +#ifndef LINUX_BCMA_DRIVER_MIPS_H_ +#define LINUX_BCMA_DRIVER_MIPS_H_ + +#define BCMA_MIPS_IPSFLAG 0x0F08 +/* which sbflags get routed to mips interrupt 1 */ +#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F +#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 +/* which sbflags get routed to mips interrupt 2 */ +#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 +#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 +/* which sbflags get routed to mips interrupt 3 */ +#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 +#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 +/* which sbflags get routed to mips interrupt 4 */ +#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 +#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 + +/* MIPS 74K core registers */ +#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 +#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 +#define BCMA_MIPS_MIPS74K_BIST 0x000C +#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 +#define BCMA_MIPS_MIPS74K_INTMASK(int) \ + ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) +#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C +#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 +#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 +#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 +#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + +#define BCMA_MIPS_OOBSELINA74 0x004 +#define BCMA_MIPS_OOBSELOUTA30 0x100 + +struct bcma_device; + +struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + u8 early_setup_done:1; +}; + +extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/kernel/include/linux/bcma/bcma_driver_pci.h b/kernel/include/linux/bcma/bcma_driver_pci.h new file mode 100644 index 000000000..5ba6918ca --- /dev/null +++ b/kernel/include/linux/bcma/bcma_driver_pci.h @@ -0,0 +1,252 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + +#include + +struct pci_dev; + +/** PCI core registers. **/ +#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ +#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ +#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ +#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF +#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ +#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ +#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ +#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 +#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ +#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ +#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ +#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ +#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ +#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ +#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ +#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ +#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ +#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ +#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ +#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ +#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ +#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ +#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ +#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ +#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ +#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ + +/* SBtoPCIx */ +#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 +#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 +#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 +#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + +/* PCIE protocol PHY diagnostic registers */ +#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ +#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ +#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ +#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ +#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ +#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ +#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ +#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ +#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ +#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ +#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ +#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ +#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ +#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ +#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ +#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ +#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + +/* PCIE protocol DLLP diagnostic registers */ +#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ +#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ +#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ +#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) +#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ +#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ +#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ +#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ +#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ +#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ +#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ +#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ +#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ +#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ +#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ + +/* SERDES RX registers */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ +#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ +#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ +#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ + +/* SERDES PLL registers */ +#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ +#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ + +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + +/* PCIE Config space accessing MACROS */ +#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ +#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ +#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ +#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ + +#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ +#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ +#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ +#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + +#define BCMA_CORE_PCI_ + +/* MDIO devices (SERDES modules) */ +#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 +#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 +#define BCMA_CORE_PCI_MDIO_BLK0 0x800 +#define BCMA_CORE_PCI_MDIO_BLK1 0x801 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 +#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A +#define BCMA_CORE_PCI_MDIO_BLK2 0x802 +#define BCMA_CORE_PCI_MDIO_BLK3 0x803 +#define BCMA_CORE_PCI_MDIO_BLK4 0x804 +#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ +#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 +#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 +#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 + +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; +struct bcma_bus; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { + struct bcma_drv_pci *pdev; + + u32 host_cfg_addr; + spinlock_t cfgspace_lock; + + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; +#endif + +struct bcma_drv_pci { + struct bcma_device *core; + u8 early_setup_done:1; + u8 setup_done:1; + u8 hostmode:1; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host *host_controller; +#endif +}; + +/* Register access */ +#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +#ifdef CONFIG_BCMA_DRIVER_PCI +extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); +#else +static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) +{ +} +#endif + +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); + +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/kernel/include/linux/bcma/bcma_driver_pcie2.h b/kernel/include/linux/bcma/bcma_driver_pcie2.h new file mode 100644 index 000000000..31e6d17ab --- /dev/null +++ b/kernel/include/linux/bcma/bcma_driver_pcie2.h @@ -0,0 +1,158 @@ +#ifndef LINUX_BCMA_DRIVER_PCIE2_H_ +#define LINUX_BCMA_DRIVER_PCIE2_H_ + +#define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000 +#define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */ +#define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */ +#define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */ +#define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010 +#define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */ +#define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */ +#define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */ +#define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004 +#define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008 +#define BCMA_CORE_PCIE2_EP_PM_CONTROL 0x000C +#define BCMA_CORE_PCIE2_EP_PM_STATUS 0x0010 +#define BCMA_CORE_PCIE2_EP_LTR_CONTROL 0x0014 +#define BCMA_CORE_PCIE2_EP_LTR_STATUS 0x0018 +#define BCMA_CORE_PCIE2_EP_OBFF_STATUS 0x001C +#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS 0x0020 +#define BCMA_CORE_PCIE2_RC_AXI_CONFIG 0x0100 +#define BCMA_CORE_PCIE2_EP_AXI_CONFIG 0x0104 +#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0 0x0108 +#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0 0x010C +#define BCMA_CORE_PCIE2_CONFIGINDADDR 0x0120 +#define BCMA_CORE_PCIE2_CONFIGINDDATA 0x0124 +#define BCMA_CORE_PCIE2_MDIOCONTROL 0x0128 +#define BCMA_CORE_PCIE2_MDIOWRDATA 0x012C +#define BCMA_CORE_PCIE2_MDIORDDATA 0x0130 +#define BCMA_CORE_PCIE2_DATAINTF 0x0180 +#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0 0x0188 +#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0 0x018c +#define BCMA_CORE_PCIE2_H2D_INTSTAT_0 0x0190 +#define BCMA_CORE_PCIE2_H2D_INTMASK_0 0x0194 +#define BCMA_CORE_PCIE2_D2H_INTSTAT_0 0x0198 +#define BCMA_CORE_PCIE2_D2H_INTMASK_0 0x019c +#define BCMA_CORE_PCIE2_LTR_STATE 0x01A0 /* Latency Tolerance Reporting */ +#define PCIE2_LTR_ACTIVE 2 +#define PCIE2_LTR_ACTIVE_IDLE 1 +#define PCIE2_LTR_SLEEP 0 +#define PCIE2_LTR_FINAL_MASK 0x300 +#define PCIE2_LTR_FINAL_SHIFT 8 +#define BCMA_CORE_PCIE2_PWR_INT_STATUS 0x01A4 +#define BCMA_CORE_PCIE2_PWR_INT_MASK 0x01A8 +#define BCMA_CORE_PCIE2_CFG_ADDR 0x01F8 +#define BCMA_CORE_PCIE2_CFG_DATA 0x01FC +#define BCMA_CORE_PCIE2_SYS_EQ_PAGE 0x0200 +#define BCMA_CORE_PCIE2_SYS_MSI_PAGE 0x0204 +#define BCMA_CORE_PCIE2_SYS_MSI_INTREN 0x0208 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0 0x0210 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1 0x0214 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2 0x0218 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3 0x021C +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4 0x0220 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5 0x0224 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0 0x0250 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0 0x0254 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1 0x0258 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1 0x025C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2 0x0260 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2 0x0264 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3 0x0268 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3 0x026C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4 0x0270 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4 0x0274 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5 0x0278 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5 0x027C +#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN 0x0330 +#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR 0x0334 +#define BCMA_CORE_PCIE2_SYS_MSI_REQ 0x0340 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN 0x0344 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR 0x0348 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR0 0x0350 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR1 0x0354 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR2 0x0358 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR3 0x035C +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0 0x0360 +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1 0x0364 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0 0x0370 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1 0x0374 +#define BCMA_CORE_PCIE2_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0 0x0C00 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1 0x0C04 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2 0x0C08 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3 0x0C0C +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4 0x0C10 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5 0x0C14 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6 0x0C18 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7 0x0C1C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0 0x0C20 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1 0x0C24 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2 0x0C28 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3 0x0C2C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4 0x0C30 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5 0x0C34 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6 0x0C38 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7 0x0C3C +#define BCMA_CORE_PCIE2_FUNC0_IMAP1 0x0C80 +#define BCMA_CORE_PCIE2_FUNC1_IMAP1 0x0C88 +#define BCMA_CORE_PCIE2_FUNC0_IMAP2 0x0CC0 +#define BCMA_CORE_PCIE2_FUNC1_IMAP2 0x0CC8 +#define BCMA_CORE_PCIE2_IARR0_LOWER 0x0D00 +#define BCMA_CORE_PCIE2_IARR0_UPPER 0x0D04 +#define BCMA_CORE_PCIE2_IARR1_LOWER 0x0D08 +#define BCMA_CORE_PCIE2_IARR1_UPPER 0x0D0C +#define BCMA_CORE_PCIE2_IARR2_LOWER 0x0D10 +#define BCMA_CORE_PCIE2_IARR2_UPPER 0x0D14 +#define BCMA_CORE_PCIE2_OARR0 0x0D20 +#define BCMA_CORE_PCIE2_OARR1 0x0D28 +#define BCMA_CORE_PCIE2_OARR2 0x0D30 +#define BCMA_CORE_PCIE2_OMAP0_LOWER 0x0D40 +#define BCMA_CORE_PCIE2_OMAP0_UPPER 0x0D44 +#define BCMA_CORE_PCIE2_OMAP1_LOWER 0x0D48 +#define BCMA_CORE_PCIE2_OMAP1_UPPER 0x0D4C +#define BCMA_CORE_PCIE2_OMAP2_LOWER 0x0D50 +#define BCMA_CORE_PCIE2_OMAP2_UPPER 0x0D54 +#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE 0x0D58 +#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE 0x0D5C +#define BCMA_CORE_PCIE2_MEM_CONTROL 0x0F00 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0 0x0F04 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1 0x0F08 +#define BCMA_CORE_PCIE2_LINK_STATUS 0x0F0C +#define BCMA_CORE_PCIE2_STRAP_STATUS 0x0F10 +#define BCMA_CORE_PCIE2_RESET_STATUS 0x0F14 +#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN 0x0F18 +#define BCMA_CORE_PCIE2_MISC_INTR_EN 0x0F1C +#define BCMA_CORE_PCIE2_TX_DEBUG_CFG 0x0F20 +#define BCMA_CORE_PCIE2_MISC_CONFIG 0x0F24 +#define BCMA_CORE_PCIE2_MISC_STATUS 0x0F28 +#define BCMA_CORE_PCIE2_INTR_EN 0x0F30 +#define BCMA_CORE_PCIE2_INTR_CLEAR 0x0F34 +#define BCMA_CORE_PCIE2_INTR_STATUS 0x0F38 + +/* PCIE gen2 config regs */ +#define PCIE2_INTSTATUS 0x090 +#define PCIE2_INTMASK 0x094 +#define PCIE2_SBMBX 0x098 + +#define PCIE2_PMCR_REFUP 0x1814 /* Trefup time */ + +#define PCIE2_CAP_DEVSTSCTRL2_OFFSET 0xD4 +#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB 0x400 +#define PCIE2_PVT_REG_PM_CLK_PERIOD 0x184c + +struct bcma_drv_pcie2 { + struct bcma_device *core; + + u16 reqsize; +}; + +#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) +#define pcie2_read32(pcie2, offset) bcma_read32((pcie2)->core, offset) +#define pcie2_write16(pcie2, offset, val) bcma_write16((pcie2)->core, offset, val) +#define pcie2_write32(pcie2, offset, val) bcma_write32((pcie2)->core, offset, val) + +#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) +#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) + +#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ diff --git a/kernel/include/linux/bcma/bcma_regs.h b/kernel/include/linux/bcma/bcma_regs.h new file mode 100644 index 000000000..ebd5c1fcd --- /dev/null +++ b/kernel/include/linux/bcma/bcma_regs.h @@ -0,0 +1,101 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + +/* Some single registers are shared between many cores */ +/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */ +#define BCMA_CLKCTLST 0x01E0 /* Clock control and status */ +#define BCMA_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define BCMA_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define BCMA_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ +#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8 +#define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ +#define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ +#define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ +#define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ +#define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ +#define BCMA_CLKCTLST_EXTRESST_SHIFT 24 +/* Is there any BCM4328 on BCMA bus? */ +#define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ +#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ + +/* Agent registers (common for every core) */ +#define BCMA_IOCTL 0x0408 /* IO control */ +#define BCMA_IOCTL_CLK 0x0001 +#define BCMA_IOCTL_FGC 0x0002 +#define BCMA_IOCTL_CORE_BITS 0x3FFC +#define BCMA_IOCTL_PME_EN 0x4000 +#define BCMA_IOCTL_BIST_EN 0x8000 +#define BCMA_IOST 0x0500 /* IO status */ +#define BCMA_IOST_CORE_BITS 0x0FFF +#define BCMA_IOST_DMA64 0x1000 +#define BCMA_IOST_GATED_CLK 0x2000 +#define BCMA_IOST_BIST_ERROR 0x4000 +#define BCMA_IOST_BIST_DONE 0x8000 +#define BCMA_RESET_CTL 0x0800 +#define BCMA_RESET_CTL_RESET 0x0001 +#define BCMA_RESET_ST 0x0804 + +#define BCMA_NS_ROM_IOST_BOOT_DEV_MASK 0x0003 +#define BCMA_NS_ROM_IOST_BOOT_DEV_NOR 0x0000 +#define BCMA_NS_ROM_IOST_BOOT_DEV_NAND 0x0001 +#define BCMA_NS_ROM_IOST_BOOT_DEV_ROM 0x0002 + +/* BCMA PCI config space registers. */ +#define BCMA_PCI_PMCSR 0x44 +#define BCMA_PCI_PE 0x100 +#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ +#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ +#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define BCMA_PCI_BAR0_WIN2 0xAC +#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + +#define BCMA_PCIE2_BAR0_WIN2 0x70 + +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) +#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ + + +#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), low 32 bits + */ +#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ +#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ +#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ + +#endif /* LINUX_BCMA_REGS_H_ */ diff --git a/kernel/include/linux/bcma/bcma_soc.h b/kernel/include/linux/bcma/bcma_soc.h new file mode 100644 index 000000000..1b5fc0c3b --- /dev/null +++ b/kernel/include/linux/bcma/bcma_soc.h @@ -0,0 +1,15 @@ +#ifndef LINUX_BCMA_SOC_H_ +#define LINUX_BCMA_SOC_H_ + +#include + +struct bcma_soc { + struct bcma_bus bus; +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc); +int __init bcma_host_soc_init(struct bcma_soc *soc); + +int bcma_bus_register(struct bcma_bus *bus); + +#endif /* LINUX_BCMA_SOC_H_ */ -- cgit 1.2.3-korg