From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/fs/jbd/Kconfig | 30 - kernel/fs/jbd/Makefile | 7 - kernel/fs/jbd/checkpoint.c | 784 --------------- kernel/fs/jbd/commit.c | 1021 -------------------- kernel/fs/jbd/journal.c | 2145 ----------------------------------------- kernel/fs/jbd/recovery.c | 594 ------------ kernel/fs/jbd/revoke.c | 733 -------------- kernel/fs/jbd/transaction.c | 2237 ------------------------------------------- 8 files changed, 7551 deletions(-) delete mode 100644 kernel/fs/jbd/Kconfig delete mode 100644 kernel/fs/jbd/Makefile delete mode 100644 kernel/fs/jbd/checkpoint.c delete mode 100644 kernel/fs/jbd/commit.c delete mode 100644 kernel/fs/jbd/journal.c delete mode 100644 kernel/fs/jbd/recovery.c delete mode 100644 kernel/fs/jbd/revoke.c delete mode 100644 kernel/fs/jbd/transaction.c (limited to 'kernel/fs/jbd') diff --git a/kernel/fs/jbd/Kconfig b/kernel/fs/jbd/Kconfig deleted file mode 100644 index 4e28beeed..000000000 --- a/kernel/fs/jbd/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config JBD - tristate - help - This is a generic journalling layer for block devices. It is - currently used by the ext3 file system, but it could also be - used to add journal support to other file systems or block - devices such as RAID or LVM. - - If you are using the ext3 file system, you need to say Y here. - If you are not using ext3 then you will probably want to say N. - - To compile this device as a module, choose M here: the module will be - called jbd. If you are compiling ext3 into the kernel, you - cannot compile this code as a module. - -config JBD_DEBUG - bool "JBD (ext3) debugging support" - depends on JBD && DEBUG_FS - help - If you are using the ext3 journaled file system (or potentially any - other file system/device using JBD), this option allows you to - enable debugging output while the system is running, in order to - help track down any problems you are having. By default the - debugging output will be turned off. - - If you select Y here, then you will be able to turn on debugging - with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a - number between 1 and 5, the higher the number, the more debugging - output is generated. To turn debugging off again, do - "echo 0 > /sys/kernel/debug/jbd/jbd-debug". diff --git a/kernel/fs/jbd/Makefile b/kernel/fs/jbd/Makefile deleted file mode 100644 index 54aca4868..000000000 --- a/kernel/fs/jbd/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux journaling routines. -# - -obj-$(CONFIG_JBD) += jbd.o - -jbd-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o diff --git a/kernel/fs/jbd/checkpoint.c b/kernel/fs/jbd/checkpoint.c deleted file mode 100644 index 95debd71e..000000000 --- a/kernel/fs/jbd/checkpoint.c +++ /dev/null @@ -1,784 +0,0 @@ -/* - * linux/fs/jbd/checkpoint.c - * - * Written by Stephen C. Tweedie , 1999 - * - * Copyright 1999 Red Hat Software --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Checkpoint routines for the generic filesystem journaling code. - * Part of the ext2fs journaling system. - * - * Checkpointing is the process of ensuring that a section of the log is - * committed fully to disk, so that that portion of the log can be - * reused. - */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * Unlink a buffer from a transaction checkpoint list. - * - * Called with j_list_lock held. - */ -static inline void __buffer_unlink_first(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - jh->b_cpnext->b_cpprev = jh->b_cpprev; - jh->b_cpprev->b_cpnext = jh->b_cpnext; - if (transaction->t_checkpoint_list == jh) { - transaction->t_checkpoint_list = jh->b_cpnext; - if (transaction->t_checkpoint_list == jh) - transaction->t_checkpoint_list = NULL; - } -} - -/* - * Unlink a buffer from a transaction checkpoint(io) list. - * - * Called with j_list_lock held. - */ -static inline void __buffer_unlink(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - __buffer_unlink_first(jh); - if (transaction->t_checkpoint_io_list == jh) { - transaction->t_checkpoint_io_list = jh->b_cpnext; - if (transaction->t_checkpoint_io_list == jh) - transaction->t_checkpoint_io_list = NULL; - } -} - -/* - * Move a buffer from the checkpoint list to the checkpoint io list - * - * Called with j_list_lock held - */ -static inline void __buffer_relink_io(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - __buffer_unlink_first(jh); - - if (!transaction->t_checkpoint_io_list) { - jh->b_cpnext = jh->b_cpprev = jh; - } else { - jh->b_cpnext = transaction->t_checkpoint_io_list; - jh->b_cpprev = transaction->t_checkpoint_io_list->b_cpprev; - jh->b_cpprev->b_cpnext = jh; - jh->b_cpnext->b_cpprev = jh; - } - transaction->t_checkpoint_io_list = jh; -} - -/* - * Try to release a checkpointed buffer from its transaction. - * Returns 1 if we released it and 2 if we also released the - * whole transaction. - * - * Requires j_list_lock - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it - */ -static int __try_to_free_cp_buf(struct journal_head *jh) -{ - int ret = 0; - struct buffer_head *bh = jh2bh(jh); - - if (jh->b_jlist == BJ_None && !buffer_locked(bh) && - !buffer_dirty(bh) && !buffer_write_io_error(bh)) { - /* - * Get our reference so that bh cannot be freed before - * we unlock it - */ - get_bh(bh); - JBUFFER_TRACE(jh, "remove from checkpoint list"); - ret = __journal_remove_checkpoint(jh) + 1; - jbd_unlock_bh_state(bh); - BUFFER_TRACE(bh, "release"); - __brelse(bh); - } else { - jbd_unlock_bh_state(bh); - } - return ret; -} - -/* - * __log_wait_for_space: wait until there is space in the journal. - * - * Called under j-state_lock *only*. It will be unlocked if we have to wait - * for a checkpoint to free up some space in the log. - */ -void __log_wait_for_space(journal_t *journal) -{ - int nblocks, space_left; - assert_spin_locked(&journal->j_state_lock); - - nblocks = jbd_space_needed(journal); - while (__log_space_left(journal) < nblocks) { - if (journal->j_flags & JFS_ABORT) - return; - spin_unlock(&journal->j_state_lock); - if (current->plug) - io_schedule(); - mutex_lock(&journal->j_checkpoint_mutex); - - /* - * Test again, another process may have checkpointed while we - * were waiting for the checkpoint lock. If there are no - * transactions ready to be checkpointed, try to recover - * journal space by calling cleanup_journal_tail(), and if - * that doesn't work, by waiting for the currently committing - * transaction to complete. If there is absolutely no way - * to make progress, this is either a BUG or corrupted - * filesystem, so abort the journal and leave a stack - * trace for forensic evidence. - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - nblocks = jbd_space_needed(journal); - space_left = __log_space_left(journal); - if (space_left < nblocks) { - int chkpt = journal->j_checkpoint_transactions != NULL; - tid_t tid = 0; - - if (journal->j_committing_transaction) - tid = journal->j_committing_transaction->t_tid; - spin_unlock(&journal->j_list_lock); - spin_unlock(&journal->j_state_lock); - if (chkpt) { - log_do_checkpoint(journal); - } else if (cleanup_journal_tail(journal) == 0) { - /* We were able to recover space; yay! */ - ; - } else if (tid) { - log_wait_commit(journal, tid); - } else { - printk(KERN_ERR "%s: needed %d blocks and " - "only had %d space available\n", - __func__, nblocks, space_left); - printk(KERN_ERR "%s: no way to get more " - "journal space\n", __func__); - WARN_ON(1); - journal_abort(journal, 0); - } - spin_lock(&journal->j_state_lock); - } else { - spin_unlock(&journal->j_list_lock); - } - mutex_unlock(&journal->j_checkpoint_mutex); - } -} - -/* - * We were unable to perform jbd_trylock_bh_state() inside j_list_lock. - * The caller must restart a list walk. Wait for someone else to run - * jbd_unlock_bh_state(). - */ -static void jbd_sync_bh(journal_t *journal, struct buffer_head *bh) - __releases(journal->j_list_lock) -{ - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_lock_bh_state(bh); - jbd_unlock_bh_state(bh); - put_bh(bh); -} - -/* - * Clean up transaction's list of buffers submitted for io. - * We wait for any pending IO to complete and remove any clean - * buffers. Note that we take the buffers in the opposite ordering - * from the one in which they were submitted for IO. - * - * Return 0 on success, and return <0 if some buffers have failed - * to be written out. - * - * Called with j_list_lock held. - */ -static int __wait_cp_io(journal_t *journal, transaction_t *transaction) -{ - struct journal_head *jh; - struct buffer_head *bh; - tid_t this_tid; - int released = 0; - int ret = 0; - - this_tid = transaction->t_tid; -restart: - /* Did somebody clean up the transaction in the meanwhile? */ - if (journal->j_checkpoint_transactions != transaction || - transaction->t_tid != this_tid) - return ret; - while (!released && transaction->t_checkpoint_io_list) { - jh = transaction->t_checkpoint_io_list; - bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - spin_lock(&journal->j_list_lock); - goto restart; - } - get_bh(bh); - if (buffer_locked(bh)) { - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - wait_on_buffer(bh); - /* the journal_head may have gone by now */ - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - spin_lock(&journal->j_list_lock); - goto restart; - } - if (unlikely(buffer_write_io_error(bh))) - ret = -EIO; - - /* - * Now in whatever state the buffer currently is, we know that - * it has been written out and so we can drop it from the list - */ - released = __journal_remove_checkpoint(jh); - jbd_unlock_bh_state(bh); - __brelse(bh); - } - - return ret; -} - -#define NR_BATCH 64 - -static void -__flush_batch(journal_t *journal, struct buffer_head **bhs, int *batch_count) -{ - int i; - struct blk_plug plug; - - blk_start_plug(&plug); - for (i = 0; i < *batch_count; i++) - write_dirty_buffer(bhs[i], WRITE_SYNC); - blk_finish_plug(&plug); - - for (i = 0; i < *batch_count; i++) { - struct buffer_head *bh = bhs[i]; - clear_buffer_jwrite(bh); - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - } - *batch_count = 0; -} - -/* - * Try to flush one buffer from the checkpoint list to disk. - * - * Return 1 if something happened which requires us to abort the current - * scan of the checkpoint list. Return <0 if the buffer has failed to - * be written out. - * - * Called with j_list_lock held and drops it if 1 is returned - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it - */ -static int __process_buffer(journal_t *journal, struct journal_head *jh, - struct buffer_head **bhs, int *batch_count) -{ - struct buffer_head *bh = jh2bh(jh); - int ret = 0; - - if (buffer_locked(bh)) { - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - wait_on_buffer(bh); - /* the journal_head may have gone by now */ - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - ret = 1; - } else if (jh->b_transaction != NULL) { - transaction_t *t = jh->b_transaction; - tid_t tid = t->t_tid; - - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - log_start_commit(journal, tid); - log_wait_commit(journal, tid); - ret = 1; - } else if (!buffer_dirty(bh)) { - ret = 1; - if (unlikely(buffer_write_io_error(bh))) - ret = -EIO; - get_bh(bh); - J_ASSERT_JH(jh, !buffer_jbddirty(bh)); - BUFFER_TRACE(bh, "remove from checkpoint"); - __journal_remove_checkpoint(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); - } else { - /* - * Important: we are about to write the buffer, and - * possibly block, while still holding the journal lock. - * We cannot afford to let the transaction logic start - * messing around with this buffer before we write it to - * disk, as that would break recoverability. - */ - BUFFER_TRACE(bh, "queue"); - get_bh(bh); - J_ASSERT_BH(bh, !buffer_jwrite(bh)); - set_buffer_jwrite(bh); - bhs[*batch_count] = bh; - __buffer_relink_io(jh); - jbd_unlock_bh_state(bh); - (*batch_count)++; - if (*batch_count == NR_BATCH) { - spin_unlock(&journal->j_list_lock); - __flush_batch(journal, bhs, batch_count); - ret = 1; - } - } - return ret; -} - -/* - * Perform an actual checkpoint. We take the first transaction on the - * list of transactions to be checkpointed and send all its buffers - * to disk. We submit larger chunks of data at once. - * - * The journal should be locked before calling this function. - * Called with j_checkpoint_mutex held. - */ -int log_do_checkpoint(journal_t *journal) -{ - transaction_t *transaction; - tid_t this_tid; - int result; - - jbd_debug(1, "Start checkpoint\n"); - - /* - * First thing: if there are any transactions in the log which - * don't need checkpointing, just eliminate them from the - * journal straight away. - */ - result = cleanup_journal_tail(journal); - trace_jbd_checkpoint(journal, result); - jbd_debug(1, "cleanup_journal_tail returned %d\n", result); - if (result <= 0) - return result; - - /* - * OK, we need to start writing disk blocks. Take one transaction - * and write it. - */ - result = 0; - spin_lock(&journal->j_list_lock); - if (!journal->j_checkpoint_transactions) - goto out; - transaction = journal->j_checkpoint_transactions; - this_tid = transaction->t_tid; -restart: - /* - * If someone cleaned up this transaction while we slept, we're - * done (maybe it's a new transaction, but it fell at the same - * address). - */ - if (journal->j_checkpoint_transactions == transaction && - transaction->t_tid == this_tid) { - int batch_count = 0; - struct buffer_head *bhs[NR_BATCH]; - struct journal_head *jh; - int retry = 0, err; - - while (!retry && transaction->t_checkpoint_list) { - struct buffer_head *bh; - - jh = transaction->t_checkpoint_list; - bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - retry = 1; - break; - } - retry = __process_buffer(journal, jh, bhs,&batch_count); - if (retry < 0 && !result) - result = retry; - if (!retry && (need_resched() || - spin_needbreak(&journal->j_list_lock))) { - spin_unlock(&journal->j_list_lock); - retry = 1; - break; - } - } - - if (batch_count) { - if (!retry) { - spin_unlock(&journal->j_list_lock); - retry = 1; - } - __flush_batch(journal, bhs, &batch_count); - } - - if (retry) { - spin_lock(&journal->j_list_lock); - goto restart; - } - /* - * Now we have cleaned up the first transaction's checkpoint - * list. Let's clean up the second one - */ - err = __wait_cp_io(journal, transaction); - if (!result) - result = err; - } -out: - spin_unlock(&journal->j_list_lock); - if (result < 0) - journal_abort(journal, result); - else - result = cleanup_journal_tail(journal); - - return (result < 0) ? result : 0; -} - -/* - * Check the list of checkpoint transactions for the journal to see if - * we have already got rid of any since the last update of the log tail - * in the journal superblock. If so, we can instantly roll the - * superblock forward to remove those transactions from the log. - * - * Return <0 on error, 0 on success, 1 if there was nothing to clean up. - * - * This is the only part of the journaling code which really needs to be - * aware of transaction aborts. Checkpointing involves writing to the - * main filesystem area rather than to the journal, so it can proceed - * even in abort state, but we must not update the super block if - * checkpointing may have failed. Otherwise, we would lose some metadata - * buffers which should be written-back to the filesystem. - */ - -int cleanup_journal_tail(journal_t *journal) -{ - transaction_t * transaction; - tid_t first_tid; - unsigned int blocknr, freed; - - if (is_journal_aborted(journal)) - return 1; - - /* - * OK, work out the oldest transaction remaining in the log, and - * the log block it starts at. - * - * If the log is now empty, we need to work out which is the - * next transaction ID we will write, and where it will - * start. - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - transaction = journal->j_checkpoint_transactions; - if (transaction) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_committing_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_running_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = journal->j_head; - } else { - first_tid = journal->j_transaction_sequence; - blocknr = journal->j_head; - } - spin_unlock(&journal->j_list_lock); - J_ASSERT(blocknr != 0); - - /* If the oldest pinned transaction is at the tail of the log - already then there's not much we can do right now. */ - if (journal->j_tail_sequence == first_tid) { - spin_unlock(&journal->j_state_lock); - return 1; - } - spin_unlock(&journal->j_state_lock); - - /* - * We need to make sure that any blocks that were recently written out - * --- perhaps by log_do_checkpoint() --- are flushed out before we - * drop the transactions from the journal. Similarly we need to be sure - * superblock makes it to disk before next transaction starts reusing - * freed space (otherwise we could replay some blocks of the new - * transaction thinking they belong to the old one). So we use - * WRITE_FLUSH_FUA. It's unlikely this will be necessary, especially - * with an appropriately sized journal, but we need this to guarantee - * correctness. Fortunately cleanup_journal_tail() doesn't get called - * all that often. - */ - journal_update_sb_log_tail(journal, first_tid, blocknr, - WRITE_FLUSH_FUA); - - spin_lock(&journal->j_state_lock); - /* OK, update the superblock to recover the freed space. - * Physical blocks come first: have we wrapped beyond the end of - * the log? */ - freed = blocknr - journal->j_tail; - if (blocknr < journal->j_tail) - freed = freed + journal->j_last - journal->j_first; - - trace_jbd_cleanup_journal_tail(journal, first_tid, blocknr, freed); - jbd_debug(1, - "Cleaning journal tail from %d to %d (offset %u), " - "freeing %u\n", - journal->j_tail_sequence, first_tid, blocknr, freed); - - journal->j_free += freed; - journal->j_tail_sequence = first_tid; - journal->j_tail = blocknr; - spin_unlock(&journal->j_state_lock); - return 0; -} - - -/* Checkpoint list management */ - -/* - * journal_clean_one_cp_list - * - * Find all the written-back checkpoint buffers in the given list and release - * them. - * - * Called with j_list_lock held. - * Returns number of buffers reaped (for debug) - */ - -static int journal_clean_one_cp_list(struct journal_head *jh, int *released) -{ - struct journal_head *last_jh; - struct journal_head *next_jh = jh; - int ret, freed = 0; - - *released = 0; - if (!jh) - return 0; - - last_jh = jh->b_cpprev; - do { - jh = next_jh; - next_jh = jh->b_cpnext; - /* Use trylock because of the ranking */ - if (jbd_trylock_bh_state(jh2bh(jh))) { - ret = __try_to_free_cp_buf(jh); - if (ret) { - freed++; - if (ret == 2) { - *released = 1; - return freed; - } - } - } - /* - * This function only frees up some memory - * if possible so we dont have an obligation - * to finish processing. Bail out if preemption - * requested: - */ - if (need_resched()) - return freed; - } while (jh != last_jh); - - return freed; -} - -/* - * journal_clean_checkpoint_list - * - * Find all the written-back checkpoint buffers in the journal and release them. - * - * Called with the journal locked. - * Called with j_list_lock held. - * Returns number of buffers reaped (for debug) - */ - -int __journal_clean_checkpoint_list(journal_t *journal) -{ - transaction_t *transaction, *last_transaction, *next_transaction; - int ret = 0; - int released; - - transaction = journal->j_checkpoint_transactions; - if (!transaction) - goto out; - - last_transaction = transaction->t_cpprev; - next_transaction = transaction; - do { - transaction = next_transaction; - next_transaction = transaction->t_cpnext; - ret += journal_clean_one_cp_list(transaction-> - t_checkpoint_list, &released); - /* - * This function only frees up some memory if possible so we - * dont have an obligation to finish processing. Bail out if - * preemption requested: - */ - if (need_resched()) - goto out; - if (released) - continue; - /* - * It is essential that we are as careful as in the case of - * t_checkpoint_list with removing the buffer from the list as - * we can possibly see not yet submitted buffers on io_list - */ - ret += journal_clean_one_cp_list(transaction-> - t_checkpoint_io_list, &released); - if (need_resched()) - goto out; - } while (transaction != last_transaction); -out: - return ret; -} - -/* - * journal_remove_checkpoint: called after a buffer has been committed - * to disk (either by being write-back flushed to disk, or being - * committed to the log). - * - * We cannot safely clean a transaction out of the log until all of the - * buffer updates committed in that transaction have safely been stored - * elsewhere on disk. To achieve this, all of the buffers in a - * transaction need to be maintained on the transaction's checkpoint - * lists until they have been rewritten, at which point this function is - * called to remove the buffer from the existing transaction's - * checkpoint lists. - * - * The function returns 1 if it frees the transaction, 0 otherwise. - * The function can free jh and bh. - * - * This function is called with j_list_lock held. - * This function is called with jbd_lock_bh_state(jh2bh(jh)) - */ - -int __journal_remove_checkpoint(struct journal_head *jh) -{ - transaction_t *transaction; - journal_t *journal; - int ret = 0; - - JBUFFER_TRACE(jh, "entry"); - - if ((transaction = jh->b_cp_transaction) == NULL) { - JBUFFER_TRACE(jh, "not on transaction"); - goto out; - } - journal = transaction->t_journal; - - JBUFFER_TRACE(jh, "removing from transaction"); - __buffer_unlink(jh); - jh->b_cp_transaction = NULL; - journal_put_journal_head(jh); - - if (transaction->t_checkpoint_list != NULL || - transaction->t_checkpoint_io_list != NULL) - goto out; - - /* - * There is one special case to worry about: if we have just pulled the - * buffer off a running or committing transaction's checkpoing list, - * then even if the checkpoint list is empty, the transaction obviously - * cannot be dropped! - * - * The locking here around t_state is a bit sleazy. - * See the comment at the end of journal_commit_transaction(). - */ - if (transaction->t_state != T_FINISHED) - goto out; - - /* OK, that was the last buffer for the transaction: we can now - safely remove this transaction from the log */ - - __journal_drop_transaction(journal, transaction); - - /* Just in case anybody was waiting for more transactions to be - checkpointed... */ - wake_up(&journal->j_wait_logspace); - ret = 1; -out: - return ret; -} - -/* - * journal_insert_checkpoint: put a committed buffer onto a checkpoint - * list so that we know when it is safe to clean the transaction out of - * the log. - * - * Called with the journal locked. - * Called with j_list_lock held. - */ -void __journal_insert_checkpoint(struct journal_head *jh, - transaction_t *transaction) -{ - JBUFFER_TRACE(jh, "entry"); - J_ASSERT_JH(jh, buffer_dirty(jh2bh(jh)) || buffer_jbddirty(jh2bh(jh))); - J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); - - /* Get reference for checkpointing transaction */ - journal_grab_journal_head(jh2bh(jh)); - jh->b_cp_transaction = transaction; - - if (!transaction->t_checkpoint_list) { - jh->b_cpnext = jh->b_cpprev = jh; - } else { - jh->b_cpnext = transaction->t_checkpoint_list; - jh->b_cpprev = transaction->t_checkpoint_list->b_cpprev; - jh->b_cpprev->b_cpnext = jh; - jh->b_cpnext->b_cpprev = jh; - } - transaction->t_checkpoint_list = jh; -} - -/* - * We've finished with this transaction structure: adios... - * - * The transaction must have no links except for the checkpoint by this - * point. - * - * Called with the journal locked. - * Called with j_list_lock held. - */ - -void __journal_drop_transaction(journal_t *journal, transaction_t *transaction) -{ - assert_spin_locked(&journal->j_list_lock); - if (transaction->t_cpnext) { - transaction->t_cpnext->t_cpprev = transaction->t_cpprev; - transaction->t_cpprev->t_cpnext = transaction->t_cpnext; - if (journal->j_checkpoint_transactions == transaction) - journal->j_checkpoint_transactions = - transaction->t_cpnext; - if (journal->j_checkpoint_transactions == transaction) - journal->j_checkpoint_transactions = NULL; - } - - J_ASSERT(transaction->t_state == T_FINISHED); - J_ASSERT(transaction->t_buffers == NULL); - J_ASSERT(transaction->t_sync_datalist == NULL); - J_ASSERT(transaction->t_forget == NULL); - J_ASSERT(transaction->t_iobuf_list == NULL); - J_ASSERT(transaction->t_shadow_list == NULL); - J_ASSERT(transaction->t_log_list == NULL); - J_ASSERT(transaction->t_checkpoint_list == NULL); - J_ASSERT(transaction->t_checkpoint_io_list == NULL); - J_ASSERT(transaction->t_updates == 0); - J_ASSERT(journal->j_committing_transaction != transaction); - J_ASSERT(journal->j_running_transaction != transaction); - - trace_jbd_drop_transaction(journal, transaction); - jbd_debug(1, "Dropping transaction %d, all done\n", transaction->t_tid); - kfree(transaction); -} diff --git a/kernel/fs/jbd/commit.c b/kernel/fs/jbd/commit.c deleted file mode 100644 index bb217dcb4..000000000 --- a/kernel/fs/jbd/commit.c +++ /dev/null @@ -1,1021 +0,0 @@ -/* - * linux/fs/jbd/commit.c - * - * Written by Stephen C. Tweedie , 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal commit routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Default IO end handler for temporary BJ_IO buffer_heads. - */ -static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate) -{ - BUFFER_TRACE(bh, ""); - if (uptodate) - set_buffer_uptodate(bh); - else - clear_buffer_uptodate(bh); - unlock_buffer(bh); -} - -/* - * When an ext3-ordered file is truncated, it is possible that many pages are - * not successfully freed, because they are attached to a committing transaction. - * After the transaction commits, these pages are left on the LRU, with no - * ->mapping, and with attached buffers. These pages are trivially reclaimable - * by the VM, but their apparent absence upsets the VM accounting, and it makes - * the numbers in /proc/meminfo look odd. - * - * So here, we have a buffer which has just come off the forget list. Look to - * see if we can strip all buffers from the backing page. - * - * Called under journal->j_list_lock. The caller provided us with a ref - * against the buffer, and we drop that here. - */ -static void release_buffer_page(struct buffer_head *bh) -{ - struct page *page; - - if (buffer_dirty(bh)) - goto nope; - if (atomic_read(&bh->b_count) != 1) - goto nope; - page = bh->b_page; - if (!page) - goto nope; - if (page->mapping) - goto nope; - - /* OK, it's a truncated page */ - if (!trylock_page(page)) - goto nope; - - page_cache_get(page); - __brelse(bh); - try_to_free_buffers(page); - unlock_page(page); - page_cache_release(page); - return; - -nope: - __brelse(bh); -} - -/* - * Decrement reference counter for data buffer. If it has been marked - * 'BH_Freed', release it and the page to which it belongs if possible. - */ -static void release_data_buffer(struct buffer_head *bh) -{ - if (buffer_freed(bh)) { - WARN_ON_ONCE(buffer_dirty(bh)); - clear_buffer_freed(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; - release_buffer_page(bh); - } else - put_bh(bh); -} - -/* - * Try to acquire jbd_lock_bh_state() against the buffer, when j_list_lock is - * held. For ranking reasons we must trylock. If we lose, schedule away and - * return 0. j_list_lock is dropped in this case. - */ -static int inverted_lock(journal_t *journal, struct buffer_head *bh) -{ - if (!jbd_trylock_bh_state(bh)) { - spin_unlock(&journal->j_list_lock); - schedule(); - return 0; - } - return 1; -} - -/* Done it all: now write the commit record. We should have - * cleaned up our previous buffers by now, so if we are in abort - * mode we can now just skip the rest of the journal write - * entirely. - * - * Returns 1 if the journal needs to be aborted or 0 on success - */ -static int journal_write_commit_record(journal_t *journal, - transaction_t *commit_transaction) -{ - struct journal_head *descriptor; - struct buffer_head *bh; - journal_header_t *header; - int ret; - - if (is_journal_aborted(journal)) - return 0; - - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) - return 1; - - bh = jh2bh(descriptor); - - header = (journal_header_t *)(bh->b_data); - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_COMMIT_BLOCK); - header->h_sequence = cpu_to_be32(commit_transaction->t_tid); - - JBUFFER_TRACE(descriptor, "write commit block"); - set_buffer_dirty(bh); - - if (journal->j_flags & JFS_BARRIER) - ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_FLUSH_FUA); - else - ret = sync_dirty_buffer(bh); - - put_bh(bh); /* One for getblk() */ - journal_put_journal_head(descriptor); - - return (ret == -EIO); -} - -static void journal_do_submit_data(struct buffer_head **wbuf, int bufs, - int write_op) -{ - int i; - - for (i = 0; i < bufs; i++) { - wbuf[i]->b_end_io = end_buffer_write_sync; - /* - * Here we write back pagecache data that may be mmaped. Since - * we cannot afford to clean the page and set PageWriteback - * here due to lock ordering (page lock ranks above transaction - * start), the data can change while IO is in flight. Tell the - * block layer it should bounce the bio pages if stable data - * during write is required. - * - * We use up our safety reference in submit_bh(). - */ - _submit_bh(write_op, wbuf[i], 1 << BIO_SNAP_STABLE); - } -} - -/* - * Submit all the data buffers to disk - */ -static int journal_submit_data_buffers(journal_t *journal, - transaction_t *commit_transaction, - int write_op) -{ - struct journal_head *jh; - struct buffer_head *bh; - int locked; - int bufs = 0; - struct buffer_head **wbuf = journal->j_wbuf; - int err = 0; - - /* - * Whenever we unlock the journal and sleep, things can get added - * onto ->t_sync_datalist, so we have to keep looping back to - * write_out_data until we *know* that the list is empty. - * - * Cleanup any flushed data buffers from the data list. Even in - * abort mode, we want to flush this out as soon as possible. - */ -write_out_data: - cond_resched(); - spin_lock(&journal->j_list_lock); - - while (commit_transaction->t_sync_datalist) { - jh = commit_transaction->t_sync_datalist; - bh = jh2bh(jh); - locked = 0; - - /* Get reference just to make sure buffer does not disappear - * when we are forced to drop various locks */ - get_bh(bh); - /* If the buffer is dirty, we need to submit IO and hence - * we need the buffer lock. We try to lock the buffer without - * blocking. If we fail, we need to drop j_list_lock and do - * blocking lock_buffer(). - */ - if (buffer_dirty(bh)) { - if (!trylock_buffer(bh)) { - BUFFER_TRACE(bh, "needs blocking lock"); - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, - commit_transaction); - /* Write out all data to prevent deadlocks */ - journal_do_submit_data(wbuf, bufs, write_op); - bufs = 0; - lock_buffer(bh); - spin_lock(&journal->j_list_lock); - } - locked = 1; - } - /* We have to get bh_state lock. Again out of order, sigh. */ - if (!inverted_lock(journal, bh)) { - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - } - /* Someone already cleaned up the buffer? */ - if (!buffer_jbd(bh) || bh2jh(bh) != jh - || jh->b_transaction != commit_transaction - || jh->b_jlist != BJ_SyncData) { - jbd_unlock_bh_state(bh); - if (locked) - unlock_buffer(bh); - BUFFER_TRACE(bh, "already cleaned up"); - release_data_buffer(bh); - continue; - } - if (locked && test_clear_buffer_dirty(bh)) { - BUFFER_TRACE(bh, "needs writeout, adding to array"); - wbuf[bufs++] = bh; - __journal_file_buffer(jh, commit_transaction, - BJ_Locked); - jbd_unlock_bh_state(bh); - if (bufs == journal->j_wbufsize) { - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, - commit_transaction); - journal_do_submit_data(wbuf, bufs, write_op); - bufs = 0; - goto write_out_data; - } - } else if (!locked && buffer_locked(bh)) { - __journal_file_buffer(jh, commit_transaction, - BJ_Locked); - jbd_unlock_bh_state(bh); - put_bh(bh); - } else { - BUFFER_TRACE(bh, "writeout complete: unfile"); - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - __journal_unfile_buffer(jh); - jbd_unlock_bh_state(bh); - if (locked) - unlock_buffer(bh); - release_data_buffer(bh); - } - - if (need_resched() || spin_needbreak(&journal->j_list_lock)) { - spin_unlock(&journal->j_list_lock); - goto write_out_data; - } - } - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, commit_transaction); - journal_do_submit_data(wbuf, bufs, write_op); - - return err; -} - -/* - * journal_commit_transaction - * - * The primary function for committing a transaction to the log. This - * function is called by the journal thread to begin a complete commit. - */ -void journal_commit_transaction(journal_t *journal) -{ - transaction_t *commit_transaction; - struct journal_head *jh, *new_jh, *descriptor; - struct buffer_head **wbuf = journal->j_wbuf; - int bufs; - int flags; - int err; - unsigned int blocknr; - ktime_t start_time; - u64 commit_time; - char *tagp = NULL; - journal_header_t *header; - journal_block_tag_t *tag = NULL; - int space_left = 0; - int first_tag = 0; - int tag_flag; - int i; - struct blk_plug plug; - int write_op = WRITE; - - /* - * First job: lock down the current transaction and wait for - * all outstanding updates to complete. - */ - - /* Do we need to erase the effects of a prior journal_flush? */ - if (journal->j_flags & JFS_FLUSHED) { - jbd_debug(3, "super block updated\n"); - mutex_lock(&journal->j_checkpoint_mutex); - /* - * We hold j_checkpoint_mutex so tail cannot change under us. - * We don't need any special data guarantees for writing sb - * since journal is empty and it is ok for write to be - * flushed only with transaction commit. - */ - journal_update_sb_log_tail(journal, journal->j_tail_sequence, - journal->j_tail, WRITE_SYNC); - mutex_unlock(&journal->j_checkpoint_mutex); - } else { - jbd_debug(3, "superblock not updated\n"); - } - - J_ASSERT(journal->j_running_transaction != NULL); - J_ASSERT(journal->j_committing_transaction == NULL); - - commit_transaction = journal->j_running_transaction; - - trace_jbd_start_commit(journal, commit_transaction); - jbd_debug(1, "JBD: starting commit of transaction %d\n", - commit_transaction->t_tid); - - spin_lock(&journal->j_state_lock); - J_ASSERT(commit_transaction->t_state == T_RUNNING); - commit_transaction->t_state = T_LOCKED; - - trace_jbd_commit_locking(journal, commit_transaction); - spin_lock(&commit_transaction->t_handle_lock); - while (commit_transaction->t_updates) { - DEFINE_WAIT(wait); - - prepare_to_wait(&journal->j_wait_updates, &wait, - TASK_UNINTERRUPTIBLE); - if (commit_transaction->t_updates) { - spin_unlock(&commit_transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - schedule(); - spin_lock(&journal->j_state_lock); - spin_lock(&commit_transaction->t_handle_lock); - } - finish_wait(&journal->j_wait_updates, &wait); - } - spin_unlock(&commit_transaction->t_handle_lock); - - J_ASSERT (commit_transaction->t_outstanding_credits <= - journal->j_max_transaction_buffers); - - /* - * First thing we are allowed to do is to discard any remaining - * BJ_Reserved buffers. Note, it is _not_ permissible to assume - * that there are no such buffers: if a large filesystem - * operation like a truncate needs to split itself over multiple - * transactions, then it may try to do a journal_restart() while - * there are still BJ_Reserved buffers outstanding. These must - * be released cleanly from the current transaction. - * - * In this case, the filesystem must still reserve write access - * again before modifying the buffer in the new transaction, but - * we do not require it to remember exactly which old buffers it - * has reserved. This is consistent with the existing behaviour - * that multiple journal_get_write_access() calls to the same - * buffer are perfectly permissible. - */ - while (commit_transaction->t_reserved_list) { - jh = commit_transaction->t_reserved_list; - JBUFFER_TRACE(jh, "reserved, unused: refile"); - /* - * A journal_get_undo_access()+journal_release_buffer() may - * leave undo-committed data. - */ - if (jh->b_committed_data) { - struct buffer_head *bh = jh2bh(jh); - - jbd_lock_bh_state(bh); - jbd_free(jh->b_committed_data, bh->b_size); - jh->b_committed_data = NULL; - jbd_unlock_bh_state(bh); - } - journal_refile_buffer(journal, jh); - } - - /* - * Now try to drop any written-back buffers from the journal's - * checkpoint lists. We do this *before* commit because it potentially - * frees some memory - */ - spin_lock(&journal->j_list_lock); - __journal_clean_checkpoint_list(journal); - spin_unlock(&journal->j_list_lock); - - jbd_debug (3, "JBD: commit phase 1\n"); - - /* - * Clear revoked flag to reflect there is no revoked buffers - * in the next transaction which is going to be started. - */ - journal_clear_buffer_revoked_flags(journal); - - /* - * Switch to a new revoke table. - */ - journal_switch_revoke_table(journal); - - trace_jbd_commit_flushing(journal, commit_transaction); - commit_transaction->t_state = T_FLUSH; - journal->j_committing_transaction = commit_transaction; - journal->j_running_transaction = NULL; - start_time = ktime_get(); - commit_transaction->t_log_start = journal->j_head; - wake_up(&journal->j_wait_transaction_locked); - spin_unlock(&journal->j_state_lock); - - jbd_debug (3, "JBD: commit phase 2\n"); - - if (tid_geq(journal->j_commit_waited, commit_transaction->t_tid)) - write_op = WRITE_SYNC; - - /* - * Now start flushing things to disk, in the order they appear - * on the transaction lists. Data blocks go first. - */ - blk_start_plug(&plug); - err = journal_submit_data_buffers(journal, commit_transaction, - write_op); - blk_finish_plug(&plug); - - /* - * Wait for all previously submitted IO to complete. - */ - spin_lock(&journal->j_list_lock); - while (commit_transaction->t_locked_list) { - struct buffer_head *bh; - - jh = commit_transaction->t_locked_list->b_tprev; - bh = jh2bh(jh); - get_bh(bh); - if (buffer_locked(bh)) { - spin_unlock(&journal->j_list_lock); - wait_on_buffer(bh); - spin_lock(&journal->j_list_lock); - } - if (unlikely(!buffer_uptodate(bh))) { - if (!trylock_page(bh->b_page)) { - spin_unlock(&journal->j_list_lock); - lock_page(bh->b_page); - spin_lock(&journal->j_list_lock); - } - if (bh->b_page->mapping) - set_bit(AS_EIO, &bh->b_page->mapping->flags); - - unlock_page(bh->b_page); - SetPageError(bh->b_page); - err = -EIO; - } - if (!inverted_lock(journal, bh)) { - put_bh(bh); - spin_lock(&journal->j_list_lock); - continue; - } - if (buffer_jbd(bh) && bh2jh(bh) == jh && - jh->b_transaction == commit_transaction && - jh->b_jlist == BJ_Locked) - __journal_unfile_buffer(jh); - jbd_unlock_bh_state(bh); - release_data_buffer(bh); - cond_resched_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - - if (err) { - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: Detected IO errors while flushing file data " - "on %s\n", bdevname(journal->j_fs_dev, b)); - if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR) - journal_abort(journal, err); - err = 0; - } - - blk_start_plug(&plug); - - journal_write_revoke_records(journal, commit_transaction, write_op); - - /* - * If we found any dirty or locked buffers, then we should have - * looped back up to the write_out_data label. If there weren't - * any then journal_clean_data_list should have wiped the list - * clean by now, so check that it is in fact empty. - */ - J_ASSERT (commit_transaction->t_sync_datalist == NULL); - - jbd_debug (3, "JBD: commit phase 3\n"); - - /* - * Way to go: we have now written out all of the data for a - * transaction! Now comes the tricky part: we need to write out - * metadata. Loop over the transaction's entire buffer list: - */ - spin_lock(&journal->j_state_lock); - commit_transaction->t_state = T_COMMIT; - spin_unlock(&journal->j_state_lock); - - trace_jbd_commit_logging(journal, commit_transaction); - J_ASSERT(commit_transaction->t_nr_buffers <= - commit_transaction->t_outstanding_credits); - - descriptor = NULL; - bufs = 0; - while (commit_transaction->t_buffers) { - - /* Find the next buffer to be journaled... */ - - jh = commit_transaction->t_buffers; - - /* If we're in abort mode, we just un-journal the buffer and - release it. */ - - if (is_journal_aborted(journal)) { - clear_buffer_jbddirty(jh2bh(jh)); - JBUFFER_TRACE(jh, "journal is aborting: refile"); - journal_refile_buffer(journal, jh); - /* If that was the last one, we need to clean up - * any descriptor buffers which may have been - * already allocated, even if we are now - * aborting. */ - if (!commit_transaction->t_buffers) - goto start_journal_io; - continue; - } - - /* Make sure we have a descriptor block in which to - record the metadata buffer. */ - - if (!descriptor) { - struct buffer_head *bh; - - J_ASSERT (bufs == 0); - - jbd_debug(4, "JBD: get descriptor\n"); - - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) { - journal_abort(journal, -EIO); - continue; - } - - bh = jh2bh(descriptor); - jbd_debug(4, "JBD: got buffer %llu (%p)\n", - (unsigned long long)bh->b_blocknr, bh->b_data); - header = (journal_header_t *)&bh->b_data[0]; - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_DESCRIPTOR_BLOCK); - header->h_sequence = cpu_to_be32(commit_transaction->t_tid); - - tagp = &bh->b_data[sizeof(journal_header_t)]; - space_left = bh->b_size - sizeof(journal_header_t); - first_tag = 1; - set_buffer_jwrite(bh); - set_buffer_dirty(bh); - wbuf[bufs++] = bh; - - /* Record it so that we can wait for IO - completion later */ - BUFFER_TRACE(bh, "ph3: file as descriptor"); - journal_file_buffer(descriptor, commit_transaction, - BJ_LogCtl); - } - - /* Where is the buffer to be written? */ - - err = journal_next_log_block(journal, &blocknr); - /* If the block mapping failed, just abandon the buffer - and repeat this loop: we'll fall into the - refile-on-abort condition above. */ - if (err) { - journal_abort(journal, err); - continue; - } - - /* - * start_this_handle() uses t_outstanding_credits to determine - * the free space in the log, but this counter is changed - * by journal_next_log_block() also. - */ - commit_transaction->t_outstanding_credits--; - - /* Bump b_count to prevent truncate from stumbling over - the shadowed buffer! @@@ This can go if we ever get - rid of the BJ_IO/BJ_Shadow pairing of buffers. */ - get_bh(jh2bh(jh)); - - /* Make a temporary IO buffer with which to write it out - (this will requeue both the metadata buffer and the - temporary IO buffer). new_bh goes on BJ_IO*/ - - set_buffer_jwrite(jh2bh(jh)); - /* - * akpm: journal_write_metadata_buffer() sets - * new_bh->b_transaction to commit_transaction. - * We need to clean this up before we release new_bh - * (which is of type BJ_IO) - */ - JBUFFER_TRACE(jh, "ph3: write metadata"); - flags = journal_write_metadata_buffer(commit_transaction, - jh, &new_jh, blocknr); - set_buffer_jwrite(jh2bh(new_jh)); - wbuf[bufs++] = jh2bh(new_jh); - - /* Record the new block's tag in the current descriptor - buffer */ - - tag_flag = 0; - if (flags & 1) - tag_flag |= JFS_FLAG_ESCAPE; - if (!first_tag) - tag_flag |= JFS_FLAG_SAME_UUID; - - tag = (journal_block_tag_t *) tagp; - tag->t_blocknr = cpu_to_be32(jh2bh(jh)->b_blocknr); - tag->t_flags = cpu_to_be32(tag_flag); - tagp += sizeof(journal_block_tag_t); - space_left -= sizeof(journal_block_tag_t); - - if (first_tag) { - memcpy (tagp, journal->j_uuid, 16); - tagp += 16; - space_left -= 16; - first_tag = 0; - } - - /* If there's no more to do, or if the descriptor is full, - let the IO rip! */ - - if (bufs == journal->j_wbufsize || - commit_transaction->t_buffers == NULL || - space_left < sizeof(journal_block_tag_t) + 16) { - - jbd_debug(4, "JBD: Submit %d IOs\n", bufs); - - /* Write an end-of-descriptor marker before - submitting the IOs. "tag" still points to - the last tag we set up. */ - - tag->t_flags |= cpu_to_be32(JFS_FLAG_LAST_TAG); - -start_journal_io: - for (i = 0; i < bufs; i++) { - struct buffer_head *bh = wbuf[i]; - lock_buffer(bh); - clear_buffer_dirty(bh); - set_buffer_uptodate(bh); - bh->b_end_io = journal_end_buffer_io_sync; - /* - * In data=journal mode, here we can end up - * writing pagecache data that might be - * mmapped. Since we can't afford to clean the - * page and set PageWriteback (see the comment - * near the other use of _submit_bh()), the - * data can change while the write is in - * flight. Tell the block layer to bounce the - * bio pages if stable pages are required. - */ - _submit_bh(write_op, bh, 1 << BIO_SNAP_STABLE); - } - cond_resched(); - - /* Force a new descriptor to be generated next - time round the loop. */ - descriptor = NULL; - bufs = 0; - } - } - - blk_finish_plug(&plug); - - /* Lo and behold: we have just managed to send a transaction to - the log. Before we can commit it, wait for the IO so far to - complete. Control buffers being written are on the - transaction's t_log_list queue, and metadata buffers are on - the t_iobuf_list queue. - - Wait for the buffers in reverse order. That way we are - less likely to be woken up until all IOs have completed, and - so we incur less scheduling load. - */ - - jbd_debug(3, "JBD: commit phase 4\n"); - - /* - * akpm: these are BJ_IO, and j_list_lock is not needed. - * See __journal_try_to_free_buffer. - */ -wait_for_iobuf: - while (commit_transaction->t_iobuf_list != NULL) { - struct buffer_head *bh; - - jh = commit_transaction->t_iobuf_list->b_tprev; - bh = jh2bh(jh); - if (buffer_locked(bh)) { - wait_on_buffer(bh); - goto wait_for_iobuf; - } - if (cond_resched()) - goto wait_for_iobuf; - - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - - clear_buffer_jwrite(bh); - - JBUFFER_TRACE(jh, "ph4: unfile after journal write"); - journal_unfile_buffer(journal, jh); - - /* - * ->t_iobuf_list should contain only dummy buffer_heads - * which were created by journal_write_metadata_buffer(). - */ - BUFFER_TRACE(bh, "dumping temporary bh"); - journal_put_journal_head(jh); - __brelse(bh); - J_ASSERT_BH(bh, atomic_read(&bh->b_count) == 0); - free_buffer_head(bh); - - /* We also have to unlock and free the corresponding - shadowed buffer */ - jh = commit_transaction->t_shadow_list->b_tprev; - bh = jh2bh(jh); - clear_buffer_jwrite(bh); - J_ASSERT_BH(bh, buffer_jbddirty(bh)); - - /* The metadata is now released for reuse, but we need - to remember it against this transaction so that when - we finally commit, we can do any checkpointing - required. */ - JBUFFER_TRACE(jh, "file as BJ_Forget"); - journal_file_buffer(jh, commit_transaction, BJ_Forget); - /* - * Wake up any transactions which were waiting for this - * IO to complete. The barrier must be here so that changes - * by journal_file_buffer() take effect before wake_up_bit() - * does the waitqueue check. - */ - smp_mb(); - wake_up_bit(&bh->b_state, BH_Unshadow); - JBUFFER_TRACE(jh, "brelse shadowed buffer"); - __brelse(bh); - } - - J_ASSERT (commit_transaction->t_shadow_list == NULL); - - jbd_debug(3, "JBD: commit phase 5\n"); - - /* Here we wait for the revoke record and descriptor record buffers */ - wait_for_ctlbuf: - while (commit_transaction->t_log_list != NULL) { - struct buffer_head *bh; - - jh = commit_transaction->t_log_list->b_tprev; - bh = jh2bh(jh); - if (buffer_locked(bh)) { - wait_on_buffer(bh); - goto wait_for_ctlbuf; - } - if (cond_resched()) - goto wait_for_ctlbuf; - - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - - BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile"); - clear_buffer_jwrite(bh); - journal_unfile_buffer(journal, jh); - journal_put_journal_head(jh); - __brelse(bh); /* One for getblk */ - /* AKPM: bforget here */ - } - - if (err) - journal_abort(journal, err); - - jbd_debug(3, "JBD: commit phase 6\n"); - - /* All metadata is written, now write commit record and do cleanup */ - spin_lock(&journal->j_state_lock); - J_ASSERT(commit_transaction->t_state == T_COMMIT); - commit_transaction->t_state = T_COMMIT_RECORD; - spin_unlock(&journal->j_state_lock); - - if (journal_write_commit_record(journal, commit_transaction)) - err = -EIO; - - if (err) - journal_abort(journal, err); - - /* End of a transaction! Finally, we can do checkpoint - processing: any buffers committed as a result of this - transaction can be removed from any checkpoint list it was on - before. */ - - jbd_debug(3, "JBD: commit phase 7\n"); - - J_ASSERT(commit_transaction->t_sync_datalist == NULL); - J_ASSERT(commit_transaction->t_buffers == NULL); - J_ASSERT(commit_transaction->t_checkpoint_list == NULL); - J_ASSERT(commit_transaction->t_iobuf_list == NULL); - J_ASSERT(commit_transaction->t_shadow_list == NULL); - J_ASSERT(commit_transaction->t_log_list == NULL); - -restart_loop: - /* - * As there are other places (journal_unmap_buffer()) adding buffers - * to this list we have to be careful and hold the j_list_lock. - */ - spin_lock(&journal->j_list_lock); - while (commit_transaction->t_forget) { - transaction_t *cp_transaction; - struct buffer_head *bh; - int try_to_free = 0; - - jh = commit_transaction->t_forget; - spin_unlock(&journal->j_list_lock); - bh = jh2bh(jh); - /* - * Get a reference so that bh cannot be freed before we are - * done with it. - */ - get_bh(bh); - jbd_lock_bh_state(bh); - J_ASSERT_JH(jh, jh->b_transaction == commit_transaction || - jh->b_transaction == journal->j_running_transaction); - - /* - * If there is undo-protected committed data against - * this buffer, then we can remove it now. If it is a - * buffer needing such protection, the old frozen_data - * field now points to a committed version of the - * buffer, so rotate that field to the new committed - * data. - * - * Otherwise, we can just throw away the frozen data now. - */ - if (jh->b_committed_data) { - jbd_free(jh->b_committed_data, bh->b_size); - jh->b_committed_data = NULL; - if (jh->b_frozen_data) { - jh->b_committed_data = jh->b_frozen_data; - jh->b_frozen_data = NULL; - } - } else if (jh->b_frozen_data) { - jbd_free(jh->b_frozen_data, bh->b_size); - jh->b_frozen_data = NULL; - } - - spin_lock(&journal->j_list_lock); - cp_transaction = jh->b_cp_transaction; - if (cp_transaction) { - JBUFFER_TRACE(jh, "remove from old cp transaction"); - __journal_remove_checkpoint(jh); - } - - /* Only re-checkpoint the buffer_head if it is marked - * dirty. If the buffer was added to the BJ_Forget list - * by journal_forget, it may no longer be dirty and - * there's no point in keeping a checkpoint record for - * it. */ - - /* - * A buffer which has been freed while still being journaled by - * a previous transaction. - */ - if (buffer_freed(bh)) { - /* - * If the running transaction is the one containing - * "add to orphan" operation (b_next_transaction != - * NULL), we have to wait for that transaction to - * commit before we can really get rid of the buffer. - * So just clear b_modified to not confuse transaction - * credit accounting and refile the buffer to - * BJ_Forget of the running transaction. If the just - * committed transaction contains "add to orphan" - * operation, we can completely invalidate the buffer - * now. We are rather throughout in that since the - * buffer may be still accessible when blocksize < - * pagesize and it is attached to the last partial - * page. - */ - jh->b_modified = 0; - if (!jh->b_next_transaction) { - clear_buffer_freed(bh); - clear_buffer_jbddirty(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; - } - } - - if (buffer_jbddirty(bh)) { - JBUFFER_TRACE(jh, "add to new checkpointing trans"); - __journal_insert_checkpoint(jh, commit_transaction); - if (is_journal_aborted(journal)) - clear_buffer_jbddirty(bh); - } else { - J_ASSERT_BH(bh, !buffer_dirty(bh)); - /* - * The buffer on BJ_Forget list and not jbddirty means - * it has been freed by this transaction and hence it - * could not have been reallocated until this - * transaction has committed. *BUT* it could be - * reallocated once we have written all the data to - * disk and before we process the buffer on BJ_Forget - * list. - */ - if (!jh->b_next_transaction) - try_to_free = 1; - } - JBUFFER_TRACE(jh, "refile or unfile freed buffer"); - __journal_refile_buffer(jh); - jbd_unlock_bh_state(bh); - if (try_to_free) - release_buffer_page(bh); - else - __brelse(bh); - cond_resched_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - /* - * This is a bit sleazy. We use j_list_lock to protect transition - * of a transaction into T_FINISHED state and calling - * __journal_drop_transaction(). Otherwise we could race with - * other checkpointing code processing the transaction... - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - /* - * Now recheck if some buffers did not get attached to the transaction - * while the lock was dropped... - */ - if (commit_transaction->t_forget) { - spin_unlock(&journal->j_list_lock); - spin_unlock(&journal->j_state_lock); - goto restart_loop; - } - - /* Done with this transaction! */ - - jbd_debug(3, "JBD: commit phase 8\n"); - - J_ASSERT(commit_transaction->t_state == T_COMMIT_RECORD); - - commit_transaction->t_state = T_FINISHED; - J_ASSERT(commit_transaction == journal->j_committing_transaction); - journal->j_commit_sequence = commit_transaction->t_tid; - journal->j_committing_transaction = NULL; - commit_time = ktime_to_ns(ktime_sub(ktime_get(), start_time)); - - /* - * weight the commit time higher than the average time so we don't - * react too strongly to vast changes in commit time - */ - if (likely(journal->j_average_commit_time)) - journal->j_average_commit_time = (commit_time*3 + - journal->j_average_commit_time) / 4; - else - journal->j_average_commit_time = commit_time; - - spin_unlock(&journal->j_state_lock); - - if (commit_transaction->t_checkpoint_list == NULL && - commit_transaction->t_checkpoint_io_list == NULL) { - __journal_drop_transaction(journal, commit_transaction); - } else { - if (journal->j_checkpoint_transactions == NULL) { - journal->j_checkpoint_transactions = commit_transaction; - commit_transaction->t_cpnext = commit_transaction; - commit_transaction->t_cpprev = commit_transaction; - } else { - commit_transaction->t_cpnext = - journal->j_checkpoint_transactions; - commit_transaction->t_cpprev = - commit_transaction->t_cpnext->t_cpprev; - commit_transaction->t_cpnext->t_cpprev = - commit_transaction; - commit_transaction->t_cpprev->t_cpnext = - commit_transaction; - } - } - spin_unlock(&journal->j_list_lock); - - trace_jbd_end_commit(journal, commit_transaction); - jbd_debug(1, "JBD: commit %d complete, head %d\n", - journal->j_commit_sequence, journal->j_tail_sequence); - - wake_up(&journal->j_wait_done_commit); -} diff --git a/kernel/fs/jbd/journal.c b/kernel/fs/jbd/journal.c deleted file mode 100644 index c46a79adb..000000000 --- a/kernel/fs/jbd/journal.c +++ /dev/null @@ -1,2145 +0,0 @@ -/* - * linux/fs/jbd/journal.c - * - * Written by Stephen C. Tweedie , 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Generic filesystem journal-writing code; part of the ext2fs - * journaling system. - * - * This file manages journals: areas of disk reserved for logging - * transactional updates. This includes the kernel journaling thread - * which is responsible for scheduling updates to the log. - * - * We do not actually manage the physical storage of the journal in this - * file: that is left to a per-journal policy function, which allows us - * to store the journal within a filesystem-specified area for ext2 - * journaling (ext2 can use a reserved inode for storing the log). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define CREATE_TRACE_POINTS -#include - -#include -#include - -EXPORT_SYMBOL(journal_start); -EXPORT_SYMBOL(journal_restart); -EXPORT_SYMBOL(journal_extend); -EXPORT_SYMBOL(journal_stop); -EXPORT_SYMBOL(journal_lock_updates); -EXPORT_SYMBOL(journal_unlock_updates); -EXPORT_SYMBOL(journal_get_write_access); -EXPORT_SYMBOL(journal_get_create_access); -EXPORT_SYMBOL(journal_get_undo_access); -EXPORT_SYMBOL(journal_dirty_data); -EXPORT_SYMBOL(journal_dirty_metadata); -EXPORT_SYMBOL(journal_release_buffer); -EXPORT_SYMBOL(journal_forget); -#if 0 -EXPORT_SYMBOL(journal_sync_buffer); -#endif -EXPORT_SYMBOL(journal_flush); -EXPORT_SYMBOL(journal_revoke); - -EXPORT_SYMBOL(journal_init_dev); -EXPORT_SYMBOL(journal_init_inode); -EXPORT_SYMBOL(journal_update_format); -EXPORT_SYMBOL(journal_check_used_features); -EXPORT_SYMBOL(journal_check_available_features); -EXPORT_SYMBOL(journal_set_features); -EXPORT_SYMBOL(journal_create); -EXPORT_SYMBOL(journal_load); -EXPORT_SYMBOL(journal_destroy); -EXPORT_SYMBOL(journal_abort); -EXPORT_SYMBOL(journal_errno); -EXPORT_SYMBOL(journal_ack_err); -EXPORT_SYMBOL(journal_clear_err); -EXPORT_SYMBOL(log_wait_commit); -EXPORT_SYMBOL(log_start_commit); -EXPORT_SYMBOL(journal_start_commit); -EXPORT_SYMBOL(journal_force_commit_nested); -EXPORT_SYMBOL(journal_wipe); -EXPORT_SYMBOL(journal_blocks_per_page); -EXPORT_SYMBOL(journal_invalidatepage); -EXPORT_SYMBOL(journal_try_to_free_buffers); -EXPORT_SYMBOL(journal_force_commit); - -static int journal_convert_superblock_v1(journal_t *, journal_superblock_t *); -static void __journal_abort_soft (journal_t *journal, int errno); -static const char *journal_dev_name(journal_t *journal, char *buffer); - -#ifdef CONFIG_JBD_DEBUG -void __jbd_debug(int level, const char *file, const char *func, - unsigned int line, const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - if (level > journal_enable_debug) - return; - va_start(args, fmt); - vaf.fmt = fmt; - vaf.va = &args; - printk(KERN_DEBUG "%s: (%s, %u): %pV\n", file, func, line, &vaf); - va_end(args); -} -EXPORT_SYMBOL(__jbd_debug); -#endif - -/* - * Helper function used to manage commit timeouts - */ - -static void commit_timeout(unsigned long __data) -{ - struct task_struct * p = (struct task_struct *) __data; - - wake_up_process(p); -} - -/* - * kjournald: The main thread function used to manage a logging device - * journal. - * - * This kernel thread is responsible for two things: - * - * 1) COMMIT: Every so often we need to commit the current state of the - * filesystem to disk. The journal thread is responsible for writing - * all of the metadata buffers to disk. - * - * 2) CHECKPOINT: We cannot reuse a used section of the log file until all - * of the data in that part of the log has been rewritten elsewhere on - * the disk. Flushing these old buffers to reclaim space in the log is - * known as checkpointing, and this thread is responsible for that job. - */ - -static int kjournald(void *arg) -{ - journal_t *journal = arg; - transaction_t *transaction; - - /* - * Set up an interval timer which can be used to trigger a commit wakeup - * after the commit interval expires - */ - setup_timer(&journal->j_commit_timer, commit_timeout, - (unsigned long)current); - - set_freezable(); - - /* Record that the journal thread is running */ - journal->j_task = current; - wake_up(&journal->j_wait_done_commit); - - printk(KERN_INFO "kjournald starting. Commit interval %ld seconds\n", - journal->j_commit_interval / HZ); - - /* - * And now, wait forever for commit wakeup events. - */ - spin_lock(&journal->j_state_lock); - -loop: - if (journal->j_flags & JFS_UNMOUNT) - goto end_loop; - - jbd_debug(1, "commit_sequence=%d, commit_request=%d\n", - journal->j_commit_sequence, journal->j_commit_request); - - if (journal->j_commit_sequence != journal->j_commit_request) { - jbd_debug(1, "OK, requests differ\n"); - spin_unlock(&journal->j_state_lock); - del_timer_sync(&journal->j_commit_timer); - journal_commit_transaction(journal); - spin_lock(&journal->j_state_lock); - goto loop; - } - - wake_up(&journal->j_wait_done_commit); - if (freezing(current)) { - /* - * The simpler the better. Flushing journal isn't a - * good idea, because that depends on threads that may - * be already stopped. - */ - jbd_debug(1, "Now suspending kjournald\n"); - spin_unlock(&journal->j_state_lock); - try_to_freeze(); - spin_lock(&journal->j_state_lock); - } else { - /* - * We assume on resume that commits are already there, - * so we don't sleep - */ - DEFINE_WAIT(wait); - int should_sleep = 1; - - prepare_to_wait(&journal->j_wait_commit, &wait, - TASK_INTERRUPTIBLE); - if (journal->j_commit_sequence != journal->j_commit_request) - should_sleep = 0; - transaction = journal->j_running_transaction; - if (transaction && time_after_eq(jiffies, - transaction->t_expires)) - should_sleep = 0; - if (journal->j_flags & JFS_UNMOUNT) - should_sleep = 0; - if (should_sleep) { - spin_unlock(&journal->j_state_lock); - schedule(); - spin_lock(&journal->j_state_lock); - } - finish_wait(&journal->j_wait_commit, &wait); - } - - jbd_debug(1, "kjournald wakes\n"); - - /* - * Were we woken up by a commit wakeup event? - */ - transaction = journal->j_running_transaction; - if (transaction && time_after_eq(jiffies, transaction->t_expires)) { - journal->j_commit_request = transaction->t_tid; - jbd_debug(1, "woke because of timeout\n"); - } - goto loop; - -end_loop: - spin_unlock(&journal->j_state_lock); - del_timer_sync(&journal->j_commit_timer); - journal->j_task = NULL; - wake_up(&journal->j_wait_done_commit); - jbd_debug(1, "Journal thread exiting.\n"); - return 0; -} - -static int journal_start_thread(journal_t *journal) -{ - struct task_struct *t; - - t = kthread_run(kjournald, journal, "kjournald"); - if (IS_ERR(t)) - return PTR_ERR(t); - - wait_event(journal->j_wait_done_commit, journal->j_task != NULL); - return 0; -} - -static void journal_kill_thread(journal_t *journal) -{ - spin_lock(&journal->j_state_lock); - journal->j_flags |= JFS_UNMOUNT; - - while (journal->j_task) { - wake_up(&journal->j_wait_commit); - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_done_commit, - journal->j_task == NULL); - spin_lock(&journal->j_state_lock); - } - spin_unlock(&journal->j_state_lock); -} - -/* - * journal_write_metadata_buffer: write a metadata buffer to the journal. - * - * Writes a metadata buffer to a given disk block. The actual IO is not - * performed but a new buffer_head is constructed which labels the data - * to be written with the correct destination disk block. - * - * Any magic-number escaping which needs to be done will cause a - * copy-out here. If the buffer happens to start with the - * JFS_MAGIC_NUMBER, then we can't write it to the log directly: the - * magic number is only written to the log for descripter blocks. In - * this case, we copy the data and replace the first word with 0, and we - * return a result code which indicates that this buffer needs to be - * marked as an escaped buffer in the corresponding log descriptor - * block. The missing word can then be restored when the block is read - * during recovery. - * - * If the source buffer has already been modified by a new transaction - * since we took the last commit snapshot, we use the frozen copy of - * that data for IO. If we end up using the existing buffer_head's data - * for the write, then we *have* to lock the buffer to prevent anyone - * else from using and possibly modifying it while the IO is in - * progress. - * - * The function returns a pointer to the buffer_heads to be used for IO. - * - * We assume that the journal has already been locked in this function. - * - * Return value: - * <0: Error - * >=0: Finished OK - * - * On success: - * Bit 0 set == escape performed on the data - * Bit 1 set == buffer copy-out performed (kfree the data after IO) - */ - -int journal_write_metadata_buffer(transaction_t *transaction, - struct journal_head *jh_in, - struct journal_head **jh_out, - unsigned int blocknr) -{ - int need_copy_out = 0; - int done_copy_out = 0; - int do_escape = 0; - char *mapped_data; - struct buffer_head *new_bh; - struct journal_head *new_jh; - struct page *new_page; - unsigned int new_offset; - struct buffer_head *bh_in = jh2bh(jh_in); - journal_t *journal = transaction->t_journal; - - /* - * The buffer really shouldn't be locked: only the current committing - * transaction is allowed to write it, so nobody else is allowed - * to do any IO. - * - * akpm: except if we're journalling data, and write() output is - * also part of a shared mapping, and another thread has - * decided to launch a writepage() against this buffer. - */ - J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in)); - - new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL); - /* keep subsequent assertions sane */ - atomic_set(&new_bh->b_count, 1); - new_jh = journal_add_journal_head(new_bh); /* This sleeps */ - - /* - * If a new transaction has already done a buffer copy-out, then - * we use that version of the data for the commit. - */ - jbd_lock_bh_state(bh_in); -repeat: - if (jh_in->b_frozen_data) { - done_copy_out = 1; - new_page = virt_to_page(jh_in->b_frozen_data); - new_offset = offset_in_page(jh_in->b_frozen_data); - } else { - new_page = jh2bh(jh_in)->b_page; - new_offset = offset_in_page(jh2bh(jh_in)->b_data); - } - - mapped_data = kmap_atomic(new_page); - /* - * Check for escaping - */ - if (*((__be32 *)(mapped_data + new_offset)) == - cpu_to_be32(JFS_MAGIC_NUMBER)) { - need_copy_out = 1; - do_escape = 1; - } - kunmap_atomic(mapped_data); - - /* - * Do we need to do a data copy? - */ - if (need_copy_out && !done_copy_out) { - char *tmp; - - jbd_unlock_bh_state(bh_in); - tmp = jbd_alloc(bh_in->b_size, GFP_NOFS); - jbd_lock_bh_state(bh_in); - if (jh_in->b_frozen_data) { - jbd_free(tmp, bh_in->b_size); - goto repeat; - } - - jh_in->b_frozen_data = tmp; - mapped_data = kmap_atomic(new_page); - memcpy(tmp, mapped_data + new_offset, jh2bh(jh_in)->b_size); - kunmap_atomic(mapped_data); - - new_page = virt_to_page(tmp); - new_offset = offset_in_page(tmp); - done_copy_out = 1; - } - - /* - * Did we need to do an escaping? Now we've done all the - * copying, we can finally do so. - */ - if (do_escape) { - mapped_data = kmap_atomic(new_page); - *((unsigned int *)(mapped_data + new_offset)) = 0; - kunmap_atomic(mapped_data); - } - - set_bh_page(new_bh, new_page, new_offset); - new_jh->b_transaction = NULL; - new_bh->b_size = jh2bh(jh_in)->b_size; - new_bh->b_bdev = transaction->t_journal->j_dev; - new_bh->b_blocknr = blocknr; - set_buffer_mapped(new_bh); - set_buffer_dirty(new_bh); - - *jh_out = new_jh; - - /* - * The to-be-written buffer needs to get moved to the io queue, - * and the original buffer whose contents we are shadowing or - * copying is moved to the transaction's shadow queue. - */ - JBUFFER_TRACE(jh_in, "file as BJ_Shadow"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh_in, transaction, BJ_Shadow); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh_in); - - JBUFFER_TRACE(new_jh, "file as BJ_IO"); - journal_file_buffer(new_jh, transaction, BJ_IO); - - return do_escape | (done_copy_out << 1); -} - -/* - * Allocation code for the journal file. Manage the space left in the - * journal, so that we can begin checkpointing when appropriate. - */ - -/* - * __log_space_left: Return the number of free blocks left in the journal. - * - * Called with the journal already locked. - * - * Called under j_state_lock - */ - -int __log_space_left(journal_t *journal) -{ - int left = journal->j_free; - - assert_spin_locked(&journal->j_state_lock); - - /* - * Be pessimistic here about the number of those free blocks which - * might be required for log descriptor control blocks. - */ - -#define MIN_LOG_RESERVED_BLOCKS 32 /* Allow for rounding errors */ - - left -= MIN_LOG_RESERVED_BLOCKS; - - if (left <= 0) - return 0; - left -= (left >> 3); - return left; -} - -/* - * Called under j_state_lock. Returns true if a transaction commit was started. - */ -int __log_start_commit(journal_t *journal, tid_t target) -{ - /* - * The only transaction we can possibly wait upon is the - * currently running transaction (if it exists). Otherwise, - * the target tid must be an old one. - */ - if (journal->j_commit_request != target && - journal->j_running_transaction && - journal->j_running_transaction->t_tid == target) { - /* - * We want a new commit: OK, mark the request and wakeup the - * commit thread. We do _not_ do the commit ourselves. - */ - - journal->j_commit_request = target; - jbd_debug(1, "JBD: requesting commit %d/%d\n", - journal->j_commit_request, - journal->j_commit_sequence); - wake_up(&journal->j_wait_commit); - return 1; - } else if (!tid_geq(journal->j_commit_request, target)) - /* This should never happen, but if it does, preserve - the evidence before kjournald goes into a loop and - increments j_commit_sequence beyond all recognition. */ - WARN_ONCE(1, "jbd: bad log_start_commit: %u %u %u %u\n", - journal->j_commit_request, journal->j_commit_sequence, - target, journal->j_running_transaction ? - journal->j_running_transaction->t_tid : 0); - return 0; -} - -int log_start_commit(journal_t *journal, tid_t tid) -{ - int ret; - - spin_lock(&journal->j_state_lock); - ret = __log_start_commit(journal, tid); - spin_unlock(&journal->j_state_lock); - return ret; -} - -/* - * Force and wait upon a commit if the calling process is not within - * transaction. This is used for forcing out undo-protected data which contains - * bitmaps, when the fs is running out of space. - * - * We can only force the running transaction if we don't have an active handle; - * otherwise, we will deadlock. - * - * Returns true if a transaction was started. - */ -int journal_force_commit_nested(journal_t *journal) -{ - transaction_t *transaction = NULL; - tid_t tid; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction && !current->journal_info) { - transaction = journal->j_running_transaction; - __log_start_commit(journal, transaction->t_tid); - } else if (journal->j_committing_transaction) - transaction = journal->j_committing_transaction; - - if (!transaction) { - spin_unlock(&journal->j_state_lock); - return 0; /* Nothing to retry */ - } - - tid = transaction->t_tid; - spin_unlock(&journal->j_state_lock); - log_wait_commit(journal, tid); - return 1; -} - -/* - * Start a commit of the current running transaction (if any). Returns true - * if a transaction is going to be committed (or is currently already - * committing), and fills its tid in at *ptid - */ -int journal_start_commit(journal_t *journal, tid_t *ptid) -{ - int ret = 0; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction) { - tid_t tid = journal->j_running_transaction->t_tid; - - __log_start_commit(journal, tid); - /* There's a running transaction and we've just made sure - * it's commit has been scheduled. */ - if (ptid) - *ptid = tid; - ret = 1; - } else if (journal->j_committing_transaction) { - /* - * If commit has been started, then we have to wait for - * completion of that transaction. - */ - if (ptid) - *ptid = journal->j_committing_transaction->t_tid; - ret = 1; - } - spin_unlock(&journal->j_state_lock); - return ret; -} - -/* - * Wait for a specified commit to complete. - * The caller may not hold the journal lock. - */ -int log_wait_commit(journal_t *journal, tid_t tid) -{ - int err = 0; - -#ifdef CONFIG_JBD_DEBUG - spin_lock(&journal->j_state_lock); - if (!tid_geq(journal->j_commit_request, tid)) { - printk(KERN_ERR - "%s: error: j_commit_request=%d, tid=%d\n", - __func__, journal->j_commit_request, tid); - } - spin_unlock(&journal->j_state_lock); -#endif - spin_lock(&journal->j_state_lock); - /* - * Not running or committing trans? Must be already committed. This - * saves us from waiting for a *long* time when tid overflows. - */ - if (!((journal->j_running_transaction && - journal->j_running_transaction->t_tid == tid) || - (journal->j_committing_transaction && - journal->j_committing_transaction->t_tid == tid))) - goto out_unlock; - - if (!tid_geq(journal->j_commit_waited, tid)) - journal->j_commit_waited = tid; - while (tid_gt(tid, journal->j_commit_sequence)) { - jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n", - tid, journal->j_commit_sequence); - wake_up(&journal->j_wait_commit); - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_done_commit, - !tid_gt(tid, journal->j_commit_sequence)); - spin_lock(&journal->j_state_lock); - } -out_unlock: - spin_unlock(&journal->j_state_lock); - - if (unlikely(is_journal_aborted(journal))) - err = -EIO; - return err; -} - -/* - * Return 1 if a given transaction has not yet sent barrier request - * connected with a transaction commit. If 0 is returned, transaction - * may or may not have sent the barrier. Used to avoid sending barrier - * twice in common cases. - */ -int journal_trans_will_send_data_barrier(journal_t *journal, tid_t tid) -{ - int ret = 0; - transaction_t *commit_trans; - - if (!(journal->j_flags & JFS_BARRIER)) - return 0; - spin_lock(&journal->j_state_lock); - /* Transaction already committed? */ - if (tid_geq(journal->j_commit_sequence, tid)) - goto out; - /* - * Transaction is being committed and we already proceeded to - * writing commit record? - */ - commit_trans = journal->j_committing_transaction; - if (commit_trans && commit_trans->t_tid == tid && - commit_trans->t_state >= T_COMMIT_RECORD) - goto out; - ret = 1; -out: - spin_unlock(&journal->j_state_lock); - return ret; -} -EXPORT_SYMBOL(journal_trans_will_send_data_barrier); - -/* - * Log buffer allocation routines: - */ - -int journal_next_log_block(journal_t *journal, unsigned int *retp) -{ - unsigned int blocknr; - - spin_lock(&journal->j_state_lock); - J_ASSERT(journal->j_free > 1); - - blocknr = journal->j_head; - journal->j_head++; - journal->j_free--; - if (journal->j_head == journal->j_last) - journal->j_head = journal->j_first; - spin_unlock(&journal->j_state_lock); - return journal_bmap(journal, blocknr, retp); -} - -/* - * Conversion of logical to physical block numbers for the journal - * - * On external journals the journal blocks are identity-mapped, so - * this is a no-op. If needed, we can use j_blk_offset - everything is - * ready. - */ -int journal_bmap(journal_t *journal, unsigned int blocknr, - unsigned int *retp) -{ - int err = 0; - unsigned int ret; - - if (journal->j_inode) { - ret = bmap(journal->j_inode, blocknr); - if (ret) - *retp = ret; - else { - char b[BDEVNAME_SIZE]; - - printk(KERN_ALERT "%s: journal block not found " - "at offset %u on %s\n", - __func__, - blocknr, - bdevname(journal->j_dev, b)); - err = -EIO; - __journal_abort_soft(journal, err); - } - } else { - *retp = blocknr; /* +journal->j_blk_offset */ - } - return err; -} - -/* - * We play buffer_head aliasing tricks to write data/metadata blocks to - * the journal without copying their contents, but for journal - * descriptor blocks we do need to generate bona fide buffers. - * - * After the caller of journal_get_descriptor_buffer() has finished modifying - * the buffer's contents they really should run flush_dcache_page(bh->b_page). - * But we don't bother doing that, so there will be coherency problems with - * mmaps of blockdevs which hold live JBD-controlled filesystems. - */ -struct journal_head *journal_get_descriptor_buffer(journal_t *journal) -{ - struct buffer_head *bh; - unsigned int blocknr; - int err; - - err = journal_next_log_block(journal, &blocknr); - - if (err) - return NULL; - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) - return NULL; - lock_buffer(bh); - memset(bh->b_data, 0, journal->j_blocksize); - set_buffer_uptodate(bh); - unlock_buffer(bh); - BUFFER_TRACE(bh, "return this buffer"); - return journal_add_journal_head(bh); -} - -/* - * Management for journal control blocks: functions to create and - * destroy journal_t structures, and to initialise and read existing - * journal blocks from disk. */ - -/* First: create and setup a journal_t object in memory. We initialise - * very few fields yet: that has to wait until we have created the - * journal structures from from scratch, or loaded them from disk. */ - -static journal_t * journal_init_common (void) -{ - journal_t *journal; - int err; - - journal = kzalloc(sizeof(*journal), GFP_KERNEL); - if (!journal) - goto fail; - - init_waitqueue_head(&journal->j_wait_transaction_locked); - init_waitqueue_head(&journal->j_wait_logspace); - init_waitqueue_head(&journal->j_wait_done_commit); - init_waitqueue_head(&journal->j_wait_checkpoint); - init_waitqueue_head(&journal->j_wait_commit); - init_waitqueue_head(&journal->j_wait_updates); - mutex_init(&journal->j_checkpoint_mutex); - spin_lock_init(&journal->j_revoke_lock); - spin_lock_init(&journal->j_list_lock); - spin_lock_init(&journal->j_state_lock); - - journal->j_commit_interval = (HZ * JBD_DEFAULT_MAX_COMMIT_AGE); - - /* The journal is marked for error until we succeed with recovery! */ - journal->j_flags = JFS_ABORT; - - /* Set up a default-sized revoke table for the new mount. */ - err = journal_init_revoke(journal, JOURNAL_REVOKE_DEFAULT_HASH); - if (err) { - kfree(journal); - goto fail; - } - return journal; -fail: - return NULL; -} - -/* journal_init_dev and journal_init_inode: - * - * Create a journal structure assigned some fixed set of disk blocks to - * the journal. We don't actually touch those disk blocks yet, but we - * need to set up all of the mapping information to tell the journaling - * system where the journal blocks are. - * - */ - -/** - * journal_t * journal_init_dev() - creates and initialises a journal structure - * @bdev: Block device on which to create the journal - * @fs_dev: Device which hold journalled filesystem for this journal. - * @start: Block nr Start of journal. - * @len: Length of the journal in blocks. - * @blocksize: blocksize of journalling device - * - * Returns: a newly created journal_t * - * - * journal_init_dev creates a journal which maps a fixed contiguous - * range of blocks on an arbitrary block device. - * - */ -journal_t * journal_init_dev(struct block_device *bdev, - struct block_device *fs_dev, - int start, int len, int blocksize) -{ - journal_t *journal = journal_init_common(); - struct buffer_head *bh; - int n; - - if (!journal) - return NULL; - - /* journal descriptor can store up to n blocks -bzzz */ - journal->j_blocksize = blocksize; - n = journal->j_blocksize / sizeof(journal_block_tag_t); - journal->j_wbufsize = n; - journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL); - if (!journal->j_wbuf) { - printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n", - __func__); - goto out_err; - } - journal->j_dev = bdev; - journal->j_fs_dev = fs_dev; - journal->j_blk_offset = start; - journal->j_maxlen = len; - - bh = __getblk(journal->j_dev, start, journal->j_blocksize); - if (!bh) { - printk(KERN_ERR - "%s: Cannot get buffer for journal superblock\n", - __func__); - goto out_err; - } - journal->j_sb_buffer = bh; - journal->j_superblock = (journal_superblock_t *)bh->b_data; - - return journal; -out_err: - kfree(journal->j_wbuf); - kfree(journal); - return NULL; -} - -/** - * journal_t * journal_init_inode () - creates a journal which maps to a inode. - * @inode: An inode to create the journal in - * - * journal_init_inode creates a journal which maps an on-disk inode as - * the journal. The inode must exist already, must support bmap() and - * must have all data blocks preallocated. - */ -journal_t * journal_init_inode (struct inode *inode) -{ - struct buffer_head *bh; - journal_t *journal = journal_init_common(); - int err; - int n; - unsigned int blocknr; - - if (!journal) - return NULL; - - journal->j_dev = journal->j_fs_dev = inode->i_sb->s_bdev; - journal->j_inode = inode; - jbd_debug(1, - "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n", - journal, inode->i_sb->s_id, inode->i_ino, - (long long) inode->i_size, - inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize); - - journal->j_maxlen = inode->i_size >> inode->i_sb->s_blocksize_bits; - journal->j_blocksize = inode->i_sb->s_blocksize; - - /* journal descriptor can store up to n blocks -bzzz */ - n = journal->j_blocksize / sizeof(journal_block_tag_t); - journal->j_wbufsize = n; - journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL); - if (!journal->j_wbuf) { - printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n", - __func__); - goto out_err; - } - - err = journal_bmap(journal, 0, &blocknr); - /* If that failed, give up */ - if (err) { - printk(KERN_ERR "%s: Cannot locate journal superblock\n", - __func__); - goto out_err; - } - - bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) { - printk(KERN_ERR - "%s: Cannot get buffer for journal superblock\n", - __func__); - goto out_err; - } - journal->j_sb_buffer = bh; - journal->j_superblock = (journal_superblock_t *)bh->b_data; - - return journal; -out_err: - kfree(journal->j_wbuf); - kfree(journal); - return NULL; -} - -/* - * If the journal init or create aborts, we need to mark the journal - * superblock as being NULL to prevent the journal destroy from writing - * back a bogus superblock. - */ -static void journal_fail_superblock (journal_t *journal) -{ - struct buffer_head *bh = journal->j_sb_buffer; - brelse(bh); - journal->j_sb_buffer = NULL; -} - -/* - * Given a journal_t structure, initialise the various fields for - * startup of a new journaling session. We use this both when creating - * a journal, and after recovering an old journal to reset it for - * subsequent use. - */ - -static int journal_reset(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - unsigned int first, last; - - first = be32_to_cpu(sb->s_first); - last = be32_to_cpu(sb->s_maxlen); - if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) { - printk(KERN_ERR "JBD: Journal too short (blocks %u-%u).\n", - first, last); - journal_fail_superblock(journal); - return -EINVAL; - } - - journal->j_first = first; - journal->j_last = last; - - journal->j_head = first; - journal->j_tail = first; - journal->j_free = last - first; - - journal->j_tail_sequence = journal->j_transaction_sequence; - journal->j_commit_sequence = journal->j_transaction_sequence - 1; - journal->j_commit_request = journal->j_commit_sequence; - - journal->j_max_transaction_buffers = journal->j_maxlen / 4; - - /* - * As a special case, if the on-disk copy is already marked as needing - * no recovery (s_start == 0), then we can safely defer the superblock - * update until the next commit by setting JFS_FLUSHED. This avoids - * attempting a write to a potential-readonly device. - */ - if (sb->s_start == 0) { - jbd_debug(1,"JBD: Skipping superblock update on recovered sb " - "(start %u, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, - journal->j_errno); - journal->j_flags |= JFS_FLUSHED; - } else { - /* Lock here to make assertions happy... */ - mutex_lock(&journal->j_checkpoint_mutex); - /* - * Update log tail information. We use WRITE_FUA since new - * transaction will start reusing journal space and so we - * must make sure information about current log tail is on - * disk before that. - */ - journal_update_sb_log_tail(journal, - journal->j_tail_sequence, - journal->j_tail, - WRITE_FUA); - mutex_unlock(&journal->j_checkpoint_mutex); - } - return journal_start_thread(journal); -} - -/** - * int journal_create() - Initialise the new journal file - * @journal: Journal to create. This structure must have been initialised - * - * Given a journal_t structure which tells us which disk blocks we can - * use, create a new journal superblock and initialise all of the - * journal fields from scratch. - **/ -int journal_create(journal_t *journal) -{ - unsigned int blocknr; - struct buffer_head *bh; - journal_superblock_t *sb; - int i, err; - - if (journal->j_maxlen < JFS_MIN_JOURNAL_BLOCKS) { - printk (KERN_ERR "Journal length (%d blocks) too short.\n", - journal->j_maxlen); - journal_fail_superblock(journal); - return -EINVAL; - } - - if (journal->j_inode == NULL) { - /* - * We don't know what block to start at! - */ - printk(KERN_EMERG - "%s: creation of journal on external device!\n", - __func__); - BUG(); - } - - /* Zero out the entire journal on disk. We cannot afford to - have any blocks on disk beginning with JFS_MAGIC_NUMBER. */ - jbd_debug(1, "JBD: Zeroing out journal blocks...\n"); - for (i = 0; i < journal->j_maxlen; i++) { - err = journal_bmap(journal, i, &blocknr); - if (err) - return err; - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (unlikely(!bh)) - return -ENOMEM; - lock_buffer(bh); - memset (bh->b_data, 0, journal->j_blocksize); - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - BUFFER_TRACE(bh, "marking uptodate"); - set_buffer_uptodate(bh); - unlock_buffer(bh); - __brelse(bh); - } - - sync_blockdev(journal->j_dev); - jbd_debug(1, "JBD: journal cleared.\n"); - - /* OK, fill in the initial static fields in the new superblock */ - sb = journal->j_superblock; - - sb->s_header.h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - sb->s_header.h_blocktype = cpu_to_be32(JFS_SUPERBLOCK_V2); - - sb->s_blocksize = cpu_to_be32(journal->j_blocksize); - sb->s_maxlen = cpu_to_be32(journal->j_maxlen); - sb->s_first = cpu_to_be32(1); - - journal->j_transaction_sequence = 1; - - journal->j_flags &= ~JFS_ABORT; - journal->j_format_version = 2; - - return journal_reset(journal); -} - -static void journal_write_superblock(journal_t *journal, int write_op) -{ - struct buffer_head *bh = journal->j_sb_buffer; - int ret; - - trace_journal_write_superblock(journal, write_op); - if (!(journal->j_flags & JFS_BARRIER)) - write_op &= ~(REQ_FUA | REQ_FLUSH); - lock_buffer(bh); - if (buffer_write_io_error(bh)) { - char b[BDEVNAME_SIZE]; - /* - * Oh, dear. A previous attempt to write the journal - * superblock failed. This could happen because the - * USB device was yanked out. Or it could happen to - * be a transient write error and maybe the block will - * be remapped. Nothing we can do but to retry the - * write and hope for the best. - */ - printk(KERN_ERR "JBD: previous I/O error detected " - "for journal superblock update for %s.\n", - journal_dev_name(journal, b)); - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - } - - get_bh(bh); - bh->b_end_io = end_buffer_write_sync; - ret = submit_bh(write_op, bh); - wait_on_buffer(bh); - if (buffer_write_io_error(bh)) { - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - ret = -EIO; - } - if (ret) { - char b[BDEVNAME_SIZE]; - printk(KERN_ERR "JBD: Error %d detected " - "when updating journal superblock for %s.\n", - ret, journal_dev_name(journal, b)); - } -} - -/** - * journal_update_sb_log_tail() - Update log tail in journal sb on disk. - * @journal: The journal to update. - * @tail_tid: TID of the new transaction at the tail of the log - * @tail_block: The first block of the transaction at the tail of the log - * @write_op: With which operation should we write the journal sb - * - * Update a journal's superblock information about log tail and write it to - * disk, waiting for the IO to complete. - */ -void journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid, - unsigned int tail_block, int write_op) -{ - journal_superblock_t *sb = journal->j_superblock; - - BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); - jbd_debug(1,"JBD: updating superblock (start %u, seq %u)\n", - tail_block, tail_tid); - - sb->s_sequence = cpu_to_be32(tail_tid); - sb->s_start = cpu_to_be32(tail_block); - - journal_write_superblock(journal, write_op); - - /* Log is no longer empty */ - spin_lock(&journal->j_state_lock); - WARN_ON(!sb->s_sequence); - journal->j_flags &= ~JFS_FLUSHED; - spin_unlock(&journal->j_state_lock); -} - -/** - * mark_journal_empty() - Mark on disk journal as empty. - * @journal: The journal to update. - * - * Update a journal's dynamic superblock fields to show that journal is empty. - * Write updated superblock to disk waiting for IO to complete. - */ -static void mark_journal_empty(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - - BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); - spin_lock(&journal->j_state_lock); - /* Is it already empty? */ - if (sb->s_start == 0) { - spin_unlock(&journal->j_state_lock); - return; - } - jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", - journal->j_tail_sequence); - - sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); - sb->s_start = cpu_to_be32(0); - spin_unlock(&journal->j_state_lock); - - journal_write_superblock(journal, WRITE_FUA); - - spin_lock(&journal->j_state_lock); - /* Log is empty */ - journal->j_flags |= JFS_FLUSHED; - spin_unlock(&journal->j_state_lock); -} - -/** - * journal_update_sb_errno() - Update error in the journal. - * @journal: The journal to update. - * - * Update a journal's errno. Write updated superblock to disk waiting for IO - * to complete. - */ -static void journal_update_sb_errno(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - - spin_lock(&journal->j_state_lock); - jbd_debug(1, "JBD: updating superblock error (errno %d)\n", - journal->j_errno); - sb->s_errno = cpu_to_be32(journal->j_errno); - spin_unlock(&journal->j_state_lock); - - journal_write_superblock(journal, WRITE_SYNC); -} - -/* - * Read the superblock for a given journal, performing initial - * validation of the format. - */ - -static int journal_get_superblock(journal_t *journal) -{ - struct buffer_head *bh; - journal_superblock_t *sb; - int err = -EIO; - - bh = journal->j_sb_buffer; - - J_ASSERT(bh != NULL); - if (!buffer_uptodate(bh)) { - ll_rw_block(READ, 1, &bh); - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - printk (KERN_ERR - "JBD: IO error reading journal superblock\n"); - goto out; - } - } - - sb = journal->j_superblock; - - err = -EINVAL; - - if (sb->s_header.h_magic != cpu_to_be32(JFS_MAGIC_NUMBER) || - sb->s_blocksize != cpu_to_be32(journal->j_blocksize)) { - printk(KERN_WARNING "JBD: no valid journal superblock found\n"); - goto out; - } - - switch(be32_to_cpu(sb->s_header.h_blocktype)) { - case JFS_SUPERBLOCK_V1: - journal->j_format_version = 1; - break; - case JFS_SUPERBLOCK_V2: - journal->j_format_version = 2; - break; - default: - printk(KERN_WARNING "JBD: unrecognised superblock format ID\n"); - goto out; - } - - if (be32_to_cpu(sb->s_maxlen) < journal->j_maxlen) - journal->j_maxlen = be32_to_cpu(sb->s_maxlen); - else if (be32_to_cpu(sb->s_maxlen) > journal->j_maxlen) { - printk (KERN_WARNING "JBD: journal file too short\n"); - goto out; - } - - if (be32_to_cpu(sb->s_first) == 0 || - be32_to_cpu(sb->s_first) >= journal->j_maxlen) { - printk(KERN_WARNING - "JBD: Invalid start block of journal: %u\n", - be32_to_cpu(sb->s_first)); - goto out; - } - - return 0; - -out: - journal_fail_superblock(journal); - return err; -} - -/* - * Load the on-disk journal superblock and read the key fields into the - * journal_t. - */ - -static int load_superblock(journal_t *journal) -{ - int err; - journal_superblock_t *sb; - - err = journal_get_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - - journal->j_tail_sequence = be32_to_cpu(sb->s_sequence); - journal->j_tail = be32_to_cpu(sb->s_start); - journal->j_first = be32_to_cpu(sb->s_first); - journal->j_last = be32_to_cpu(sb->s_maxlen); - journal->j_errno = be32_to_cpu(sb->s_errno); - - return 0; -} - - -/** - * int journal_load() - Read journal from disk. - * @journal: Journal to act on. - * - * Given a journal_t structure which tells us which disk blocks contain - * a journal, read the journal from disk to initialise the in-memory - * structures. - */ -int journal_load(journal_t *journal) -{ - int err; - journal_superblock_t *sb; - - err = load_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - /* If this is a V2 superblock, then we have to check the - * features flags on it. */ - - if (journal->j_format_version >= 2) { - if ((sb->s_feature_ro_compat & - ~cpu_to_be32(JFS_KNOWN_ROCOMPAT_FEATURES)) || - (sb->s_feature_incompat & - ~cpu_to_be32(JFS_KNOWN_INCOMPAT_FEATURES))) { - printk (KERN_WARNING - "JBD: Unrecognised features on journal\n"); - return -EINVAL; - } - } - - /* Let the recovery code check whether it needs to recover any - * data from the journal. */ - if (journal_recover(journal)) - goto recovery_error; - - /* OK, we've finished with the dynamic journal bits: - * reinitialise the dynamic contents of the superblock in memory - * and reset them on disk. */ - if (journal_reset(journal)) - goto recovery_error; - - journal->j_flags &= ~JFS_ABORT; - journal->j_flags |= JFS_LOADED; - return 0; - -recovery_error: - printk (KERN_WARNING "JBD: recovery failed\n"); - return -EIO; -} - -/** - * void journal_destroy() - Release a journal_t structure. - * @journal: Journal to act on. - * - * Release a journal_t structure once it is no longer in use by the - * journaled object. - * Return <0 if we couldn't clean up the journal. - */ -int journal_destroy(journal_t *journal) -{ - int err = 0; - - - /* Wait for the commit thread to wake up and die. */ - journal_kill_thread(journal); - - /* Force a final log commit */ - if (journal->j_running_transaction) - journal_commit_transaction(journal); - - /* Force any old transactions to disk */ - - /* We cannot race with anybody but must keep assertions happy */ - mutex_lock(&journal->j_checkpoint_mutex); - /* Totally anal locking here... */ - spin_lock(&journal->j_list_lock); - while (journal->j_checkpoint_transactions != NULL) { - spin_unlock(&journal->j_list_lock); - log_do_checkpoint(journal); - spin_lock(&journal->j_list_lock); - } - - J_ASSERT(journal->j_running_transaction == NULL); - J_ASSERT(journal->j_committing_transaction == NULL); - J_ASSERT(journal->j_checkpoint_transactions == NULL); - spin_unlock(&journal->j_list_lock); - - if (journal->j_sb_buffer) { - if (!is_journal_aborted(journal)) { - journal->j_tail_sequence = - ++journal->j_transaction_sequence; - mark_journal_empty(journal); - } else - err = -EIO; - brelse(journal->j_sb_buffer); - } - mutex_unlock(&journal->j_checkpoint_mutex); - - iput(journal->j_inode); - if (journal->j_revoke) - journal_destroy_revoke(journal); - kfree(journal->j_wbuf); - kfree(journal); - - return err; -} - - -/** - *int journal_check_used_features () - Check if features specified are used. - * @journal: Journal to check. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Check whether the journal uses all of a given set of - * features. Return true (non-zero) if it does. - **/ - -int journal_check_used_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - journal_superblock_t *sb; - - if (!compat && !ro && !incompat) - return 1; - if (journal->j_format_version == 1) - return 0; - - sb = journal->j_superblock; - - if (((be32_to_cpu(sb->s_feature_compat) & compat) == compat) && - ((be32_to_cpu(sb->s_feature_ro_compat) & ro) == ro) && - ((be32_to_cpu(sb->s_feature_incompat) & incompat) == incompat)) - return 1; - - return 0; -} - -/** - * int journal_check_available_features() - Check feature set in journalling layer - * @journal: Journal to check. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Check whether the journaling code supports the use of - * all of a given set of features on this journal. Return true - * (non-zero) if it can. */ - -int journal_check_available_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - if (!compat && !ro && !incompat) - return 1; - - /* We can support any known requested features iff the - * superblock is in version 2. Otherwise we fail to support any - * extended sb features. */ - - if (journal->j_format_version != 2) - return 0; - - if ((compat & JFS_KNOWN_COMPAT_FEATURES) == compat && - (ro & JFS_KNOWN_ROCOMPAT_FEATURES) == ro && - (incompat & JFS_KNOWN_INCOMPAT_FEATURES) == incompat) - return 1; - - return 0; -} - -/** - * int journal_set_features () - Mark a given journal feature in the superblock - * @journal: Journal to act on. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Mark a given journal feature as present on the - * superblock. Returns true if the requested features could be set. - * - */ - -int journal_set_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - journal_superblock_t *sb; - - if (journal_check_used_features(journal, compat, ro, incompat)) - return 1; - - if (!journal_check_available_features(journal, compat, ro, incompat)) - return 0; - - jbd_debug(1, "Setting new features 0x%lx/0x%lx/0x%lx\n", - compat, ro, incompat); - - sb = journal->j_superblock; - - sb->s_feature_compat |= cpu_to_be32(compat); - sb->s_feature_ro_compat |= cpu_to_be32(ro); - sb->s_feature_incompat |= cpu_to_be32(incompat); - - return 1; -} - - -/** - * int journal_update_format () - Update on-disk journal structure. - * @journal: Journal to act on. - * - * Given an initialised but unloaded journal struct, poke about in the - * on-disk structure to update it to the most recent supported version. - */ -int journal_update_format (journal_t *journal) -{ - journal_superblock_t *sb; - int err; - - err = journal_get_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - - switch (be32_to_cpu(sb->s_header.h_blocktype)) { - case JFS_SUPERBLOCK_V2: - return 0; - case JFS_SUPERBLOCK_V1: - return journal_convert_superblock_v1(journal, sb); - default: - break; - } - return -EINVAL; -} - -static int journal_convert_superblock_v1(journal_t *journal, - journal_superblock_t *sb) -{ - int offset, blocksize; - struct buffer_head *bh; - - printk(KERN_WARNING - "JBD: Converting superblock from version 1 to 2.\n"); - - /* Pre-initialise new fields to zero */ - offset = ((char *) &(sb->s_feature_compat)) - ((char *) sb); - blocksize = be32_to_cpu(sb->s_blocksize); - memset(&sb->s_feature_compat, 0, blocksize-offset); - - sb->s_nr_users = cpu_to_be32(1); - sb->s_header.h_blocktype = cpu_to_be32(JFS_SUPERBLOCK_V2); - journal->j_format_version = 2; - - bh = journal->j_sb_buffer; - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - sync_dirty_buffer(bh); - return 0; -} - - -/** - * int journal_flush () - Flush journal - * @journal: Journal to act on. - * - * Flush all data for a given journal to disk and empty the journal. - * Filesystems can use this when remounting readonly to ensure that - * recovery does not need to happen on remount. - */ - -int journal_flush(journal_t *journal) -{ - int err = 0; - transaction_t *transaction = NULL; - - spin_lock(&journal->j_state_lock); - - /* Force everything buffered to the log... */ - if (journal->j_running_transaction) { - transaction = journal->j_running_transaction; - __log_start_commit(journal, transaction->t_tid); - } else if (journal->j_committing_transaction) - transaction = journal->j_committing_transaction; - - /* Wait for the log commit to complete... */ - if (transaction) { - tid_t tid = transaction->t_tid; - - spin_unlock(&journal->j_state_lock); - log_wait_commit(journal, tid); - } else { - spin_unlock(&journal->j_state_lock); - } - - /* ...and flush everything in the log out to disk. */ - spin_lock(&journal->j_list_lock); - while (!err && journal->j_checkpoint_transactions != NULL) { - spin_unlock(&journal->j_list_lock); - mutex_lock(&journal->j_checkpoint_mutex); - err = log_do_checkpoint(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - spin_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - - if (is_journal_aborted(journal)) - return -EIO; - - mutex_lock(&journal->j_checkpoint_mutex); - cleanup_journal_tail(journal); - - /* Finally, mark the journal as really needing no recovery. - * This sets s_start==0 in the underlying superblock, which is - * the magic code for a fully-recovered superblock. Any future - * commits of data to the journal will restore the current - * s_start value. */ - mark_journal_empty(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - spin_lock(&journal->j_state_lock); - J_ASSERT(!journal->j_running_transaction); - J_ASSERT(!journal->j_committing_transaction); - J_ASSERT(!journal->j_checkpoint_transactions); - J_ASSERT(journal->j_head == journal->j_tail); - J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence); - spin_unlock(&journal->j_state_lock); - return 0; -} - -/** - * int journal_wipe() - Wipe journal contents - * @journal: Journal to act on. - * @write: flag (see below) - * - * Wipe out all of the contents of a journal, safely. This will produce - * a warning if the journal contains any valid recovery information. - * Must be called between journal_init_*() and journal_load(). - * - * If 'write' is non-zero, then we wipe out the journal on disk; otherwise - * we merely suppress recovery. - */ - -int journal_wipe(journal_t *journal, int write) -{ - int err = 0; - - J_ASSERT (!(journal->j_flags & JFS_LOADED)); - - err = load_superblock(journal); - if (err) - return err; - - if (!journal->j_tail) - goto no_recovery; - - printk (KERN_WARNING "JBD: %s recovery information on journal\n", - write ? "Clearing" : "Ignoring"); - - err = journal_skip_recovery(journal); - if (write) { - /* Lock to make assertions happy... */ - mutex_lock(&journal->j_checkpoint_mutex); - mark_journal_empty(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - } - - no_recovery: - return err; -} - -/* - * journal_dev_name: format a character string to describe on what - * device this journal is present. - */ - -static const char *journal_dev_name(journal_t *journal, char *buffer) -{ - struct block_device *bdev; - - if (journal->j_inode) - bdev = journal->j_inode->i_sb->s_bdev; - else - bdev = journal->j_dev; - - return bdevname(bdev, buffer); -} - -/* - * Journal abort has very specific semantics, which we describe - * for journal abort. - * - * Two internal function, which provide abort to te jbd layer - * itself are here. - */ - -/* - * Quick version for internal journal use (doesn't lock the journal). - * Aborts hard --- we mark the abort as occurred, but do _nothing_ else, - * and don't attempt to make any other journal updates. - */ -static void __journal_abort_hard(journal_t *journal) -{ - transaction_t *transaction; - char b[BDEVNAME_SIZE]; - - if (journal->j_flags & JFS_ABORT) - return; - - printk(KERN_ERR "Aborting journal on device %s.\n", - journal_dev_name(journal, b)); - - spin_lock(&journal->j_state_lock); - journal->j_flags |= JFS_ABORT; - transaction = journal->j_running_transaction; - if (transaction) - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); -} - -/* Soft abort: record the abort error status in the journal superblock, - * but don't do any other IO. */ -static void __journal_abort_soft (journal_t *journal, int errno) -{ - if (journal->j_flags & JFS_ABORT) - return; - - if (!journal->j_errno) - journal->j_errno = errno; - - __journal_abort_hard(journal); - - if (errno) - journal_update_sb_errno(journal); -} - -/** - * void journal_abort () - Shutdown the journal immediately. - * @journal: the journal to shutdown. - * @errno: an error number to record in the journal indicating - * the reason for the shutdown. - * - * Perform a complete, immediate shutdown of the ENTIRE - * journal (not of a single transaction). This operation cannot be - * undone without closing and reopening the journal. - * - * The journal_abort function is intended to support higher level error - * recovery mechanisms such as the ext2/ext3 remount-readonly error - * mode. - * - * Journal abort has very specific semantics. Any existing dirty, - * unjournaled buffers in the main filesystem will still be written to - * disk by bdflush, but the journaling mechanism will be suspended - * immediately and no further transaction commits will be honoured. - * - * Any dirty, journaled buffers will be written back to disk without - * hitting the journal. Atomicity cannot be guaranteed on an aborted - * filesystem, but we _do_ attempt to leave as much data as possible - * behind for fsck to use for cleanup. - * - * Any attempt to get a new transaction handle on a journal which is in - * ABORT state will just result in an -EROFS error return. A - * journal_stop on an existing handle will return -EIO if we have - * entered abort state during the update. - * - * Recursive transactions are not disturbed by journal abort until the - * final journal_stop, which will receive the -EIO error. - * - * Finally, the journal_abort call allows the caller to supply an errno - * which will be recorded (if possible) in the journal superblock. This - * allows a client to record failure conditions in the middle of a - * transaction without having to complete the transaction to record the - * failure to disk. ext3_error, for example, now uses this - * functionality. - * - * Errors which originate from within the journaling layer will NOT - * supply an errno; a null errno implies that absolutely no further - * writes are done to the journal (unless there are any already in - * progress). - * - */ - -void journal_abort(journal_t *journal, int errno) -{ - __journal_abort_soft(journal, errno); -} - -/** - * int journal_errno () - returns the journal's error state. - * @journal: journal to examine. - * - * This is the errno numbet set with journal_abort(), the last - * time the journal was mounted - if the journal was stopped - * without calling abort this will be 0. - * - * If the journal has been aborted on this mount time -EROFS will - * be returned. - */ -int journal_errno(journal_t *journal) -{ - int err; - - spin_lock(&journal->j_state_lock); - if (journal->j_flags & JFS_ABORT) - err = -EROFS; - else - err = journal->j_errno; - spin_unlock(&journal->j_state_lock); - return err; -} - -/** - * int journal_clear_err () - clears the journal's error state - * @journal: journal to act on. - * - * An error must be cleared or Acked to take a FS out of readonly - * mode. - */ -int journal_clear_err(journal_t *journal) -{ - int err = 0; - - spin_lock(&journal->j_state_lock); - if (journal->j_flags & JFS_ABORT) - err = -EROFS; - else - journal->j_errno = 0; - spin_unlock(&journal->j_state_lock); - return err; -} - -/** - * void journal_ack_err() - Ack journal err. - * @journal: journal to act on. - * - * An error must be cleared or Acked to take a FS out of readonly - * mode. - */ -void journal_ack_err(journal_t *journal) -{ - spin_lock(&journal->j_state_lock); - if (journal->j_errno) - journal->j_flags |= JFS_ACK_ERR; - spin_unlock(&journal->j_state_lock); -} - -int journal_blocks_per_page(struct inode *inode) -{ - return 1 << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); -} - -/* - * Journal_head storage management - */ -static struct kmem_cache *journal_head_cache; -#ifdef CONFIG_JBD_DEBUG -static atomic_t nr_journal_heads = ATOMIC_INIT(0); -#endif - -static int journal_init_journal_head_cache(void) -{ - int retval; - - J_ASSERT(journal_head_cache == NULL); - journal_head_cache = kmem_cache_create("journal_head", - sizeof(struct journal_head), - 0, /* offset */ - SLAB_TEMPORARY, /* flags */ - NULL); /* ctor */ - retval = 0; - if (!journal_head_cache) { - retval = -ENOMEM; - printk(KERN_EMERG "JBD: no memory for journal_head cache\n"); - } - return retval; -} - -static void journal_destroy_journal_head_cache(void) -{ - if (journal_head_cache) { - kmem_cache_destroy(journal_head_cache); - journal_head_cache = NULL; - } -} - -/* - * journal_head splicing and dicing - */ -static struct journal_head *journal_alloc_journal_head(void) -{ - struct journal_head *ret; - -#ifdef CONFIG_JBD_DEBUG - atomic_inc(&nr_journal_heads); -#endif - ret = kmem_cache_zalloc(journal_head_cache, GFP_NOFS); - if (ret == NULL) { - jbd_debug(1, "out of memory for journal_head\n"); - printk_ratelimited(KERN_NOTICE "ENOMEM in %s, retrying.\n", - __func__); - - while (ret == NULL) { - yield(); - ret = kmem_cache_zalloc(journal_head_cache, GFP_NOFS); - } - } - return ret; -} - -static void journal_free_journal_head(struct journal_head *jh) -{ -#ifdef CONFIG_JBD_DEBUG - atomic_dec(&nr_journal_heads); - memset(jh, JBD_POISON_FREE, sizeof(*jh)); -#endif - kmem_cache_free(journal_head_cache, jh); -} - -/* - * A journal_head is attached to a buffer_head whenever JBD has an - * interest in the buffer. - * - * Whenever a buffer has an attached journal_head, its ->b_state:BH_JBD bit - * is set. This bit is tested in core kernel code where we need to take - * JBD-specific actions. Testing the zeroness of ->b_private is not reliable - * there. - * - * When a buffer has its BH_JBD bit set, its ->b_count is elevated by one. - * - * When a buffer has its BH_JBD bit set it is immune from being released by - * core kernel code, mainly via ->b_count. - * - * A journal_head is detached from its buffer_head when the journal_head's - * b_jcount reaches zero. Running transaction (b_transaction) and checkpoint - * transaction (b_cp_transaction) hold their references to b_jcount. - * - * Various places in the kernel want to attach a journal_head to a buffer_head - * _before_ attaching the journal_head to a transaction. To protect the - * journal_head in this situation, journal_add_journal_head elevates the - * journal_head's b_jcount refcount by one. The caller must call - * journal_put_journal_head() to undo this. - * - * So the typical usage would be: - * - * (Attach a journal_head if needed. Increments b_jcount) - * struct journal_head *jh = journal_add_journal_head(bh); - * ... - * (Get another reference for transaction) - * journal_grab_journal_head(bh); - * jh->b_transaction = xxx; - * (Put original reference) - * journal_put_journal_head(jh); - */ - -/* - * Give a buffer_head a journal_head. - * - * May sleep. - */ -struct journal_head *journal_add_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh; - struct journal_head *new_jh = NULL; - -repeat: - if (!buffer_jbd(bh)) - new_jh = journal_alloc_journal_head(); - - jbd_lock_bh_journal_head(bh); - if (buffer_jbd(bh)) { - jh = bh2jh(bh); - } else { - J_ASSERT_BH(bh, - (atomic_read(&bh->b_count) > 0) || - (bh->b_page && bh->b_page->mapping)); - - if (!new_jh) { - jbd_unlock_bh_journal_head(bh); - goto repeat; - } - - jh = new_jh; - new_jh = NULL; /* We consumed it */ - set_buffer_jbd(bh); - bh->b_private = jh; - jh->b_bh = bh; - get_bh(bh); - BUFFER_TRACE(bh, "added journal_head"); - } - jh->b_jcount++; - jbd_unlock_bh_journal_head(bh); - if (new_jh) - journal_free_journal_head(new_jh); - return bh->b_private; -} - -/* - * Grab a ref against this buffer_head's journal_head. If it ended up not - * having a journal_head, return NULL - */ -struct journal_head *journal_grab_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh = NULL; - - jbd_lock_bh_journal_head(bh); - if (buffer_jbd(bh)) { - jh = bh2jh(bh); - jh->b_jcount++; - } - jbd_unlock_bh_journal_head(bh); - return jh; -} - -static void __journal_remove_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh = bh2jh(bh); - - J_ASSERT_JH(jh, jh->b_jcount >= 0); - J_ASSERT_JH(jh, jh->b_transaction == NULL); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); - J_ASSERT_JH(jh, jh->b_jlist == BJ_None); - J_ASSERT_BH(bh, buffer_jbd(bh)); - J_ASSERT_BH(bh, jh2bh(jh) == bh); - BUFFER_TRACE(bh, "remove journal_head"); - if (jh->b_frozen_data) { - printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__); - jbd_free(jh->b_frozen_data, bh->b_size); - } - if (jh->b_committed_data) { - printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__); - jbd_free(jh->b_committed_data, bh->b_size); - } - bh->b_private = NULL; - jh->b_bh = NULL; /* debug, really */ - clear_buffer_jbd(bh); - journal_free_journal_head(jh); -} - -/* - * Drop a reference on the passed journal_head. If it fell to zero then - * release the journal_head from the buffer_head. - */ -void journal_put_journal_head(struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - jbd_lock_bh_journal_head(bh); - J_ASSERT_JH(jh, jh->b_jcount > 0); - --jh->b_jcount; - if (!jh->b_jcount) { - __journal_remove_journal_head(bh); - jbd_unlock_bh_journal_head(bh); - __brelse(bh); - } else - jbd_unlock_bh_journal_head(bh); -} - -/* - * debugfs tunables - */ -#ifdef CONFIG_JBD_DEBUG - -u8 journal_enable_debug __read_mostly; -EXPORT_SYMBOL(journal_enable_debug); - -static struct dentry *jbd_debugfs_dir; -static struct dentry *jbd_debug; - -static void __init jbd_create_debugfs_entry(void) -{ - jbd_debugfs_dir = debugfs_create_dir("jbd", NULL); - if (jbd_debugfs_dir) - jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO | S_IWUSR, - jbd_debugfs_dir, - &journal_enable_debug); -} - -static void __exit jbd_remove_debugfs_entry(void) -{ - debugfs_remove(jbd_debug); - debugfs_remove(jbd_debugfs_dir); -} - -#else - -static inline void jbd_create_debugfs_entry(void) -{ -} - -static inline void jbd_remove_debugfs_entry(void) -{ -} - -#endif - -struct kmem_cache *jbd_handle_cache; - -static int __init journal_init_handle_cache(void) -{ - jbd_handle_cache = kmem_cache_create("journal_handle", - sizeof(handle_t), - 0, /* offset */ - SLAB_TEMPORARY, /* flags */ - NULL); /* ctor */ - if (jbd_handle_cache == NULL) { - printk(KERN_EMERG "JBD: failed to create handle cache\n"); - return -ENOMEM; - } - return 0; -} - -static void journal_destroy_handle_cache(void) -{ - if (jbd_handle_cache) - kmem_cache_destroy(jbd_handle_cache); -} - -/* - * Module startup and shutdown - */ - -static int __init journal_init_caches(void) -{ - int ret; - - ret = journal_init_revoke_caches(); - if (ret == 0) - ret = journal_init_journal_head_cache(); - if (ret == 0) - ret = journal_init_handle_cache(); - return ret; -} - -static void journal_destroy_caches(void) -{ - journal_destroy_revoke_caches(); - journal_destroy_journal_head_cache(); - journal_destroy_handle_cache(); -} - -static int __init journal_init(void) -{ - int ret; - - BUILD_BUG_ON(sizeof(struct journal_superblock_s) != 1024); - - ret = journal_init_caches(); - if (ret != 0) - journal_destroy_caches(); - jbd_create_debugfs_entry(); - return ret; -} - -static void __exit journal_exit(void) -{ -#ifdef CONFIG_JBD_DEBUG - int n = atomic_read(&nr_journal_heads); - if (n) - printk(KERN_ERR "JBD: leaked %d journal_heads!\n", n); -#endif - jbd_remove_debugfs_entry(); - journal_destroy_caches(); -} - -MODULE_LICENSE("GPL"); -module_init(journal_init); -module_exit(journal_exit); - diff --git a/kernel/fs/jbd/recovery.c b/kernel/fs/jbd/recovery.c deleted file mode 100644 index a748fe214..000000000 --- a/kernel/fs/jbd/recovery.c +++ /dev/null @@ -1,594 +0,0 @@ -/* - * linux/fs/jbd/recovery.c - * - * Written by Stephen C. Tweedie , 1999 - * - * Copyright 1999-2000 Red Hat Software --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal recovery routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - */ - -#ifndef __KERNEL__ -#include "jfs_user.h" -#else -#include -#include -#include -#include -#include -#endif - -/* - * Maintain information about the progress of the recovery job, so that - * the different passes can carry information between them. - */ -struct recovery_info -{ - tid_t start_transaction; - tid_t end_transaction; - - int nr_replays; - int nr_revokes; - int nr_revoke_hits; -}; - -enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY}; -static int do_one_pass(journal_t *journal, - struct recovery_info *info, enum passtype pass); -static int scan_revoke_records(journal_t *, struct buffer_head *, - tid_t, struct recovery_info *); - -#ifdef __KERNEL__ - -/* Release readahead buffers after use */ -static void journal_brelse_array(struct buffer_head *b[], int n) -{ - while (--n >= 0) - brelse (b[n]); -} - - -/* - * When reading from the journal, we are going through the block device - * layer directly and so there is no readahead being done for us. We - * need to implement any readahead ourselves if we want it to happen at - * all. Recovery is basically one long sequential read, so make sure we - * do the IO in reasonably large chunks. - * - * This is not so critical that we need to be enormously clever about - * the readahead size, though. 128K is a purely arbitrary, good-enough - * fixed value. - */ - -#define MAXBUF 8 -static int do_readahead(journal_t *journal, unsigned int start) -{ - int err; - unsigned int max, nbufs, next; - unsigned int blocknr; - struct buffer_head *bh; - - struct buffer_head * bufs[MAXBUF]; - - /* Do up to 128K of readahead */ - max = start + (128 * 1024 / journal->j_blocksize); - if (max > journal->j_maxlen) - max = journal->j_maxlen; - - /* Do the readahead itself. We'll submit MAXBUF buffer_heads at - * a time to the block device IO layer. */ - - nbufs = 0; - - for (next = start; next < max; next++) { - err = journal_bmap(journal, next, &blocknr); - - if (err) { - printk (KERN_ERR "JBD: bad block at offset %u\n", - next); - goto failed; - } - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) { - err = -ENOMEM; - goto failed; - } - - if (!buffer_uptodate(bh) && !buffer_locked(bh)) { - bufs[nbufs++] = bh; - if (nbufs == MAXBUF) { - ll_rw_block(READ, nbufs, bufs); - journal_brelse_array(bufs, nbufs); - nbufs = 0; - } - } else - brelse(bh); - } - - if (nbufs) - ll_rw_block(READ, nbufs, bufs); - err = 0; - -failed: - if (nbufs) - journal_brelse_array(bufs, nbufs); - return err; -} - -#endif /* __KERNEL__ */ - - -/* - * Read a block from the journal - */ - -static int jread(struct buffer_head **bhp, journal_t *journal, - unsigned int offset) -{ - int err; - unsigned int blocknr; - struct buffer_head *bh; - - *bhp = NULL; - - if (offset >= journal->j_maxlen) { - printk(KERN_ERR "JBD: corrupted journal superblock\n"); - return -EIO; - } - - err = journal_bmap(journal, offset, &blocknr); - - if (err) { - printk (KERN_ERR "JBD: bad block at offset %u\n", - offset); - return err; - } - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) - return -ENOMEM; - - if (!buffer_uptodate(bh)) { - /* If this is a brand new buffer, start readahead. - Otherwise, we assume we are already reading it. */ - if (!buffer_req(bh)) - do_readahead(journal, offset); - wait_on_buffer(bh); - } - - if (!buffer_uptodate(bh)) { - printk (KERN_ERR "JBD: Failed to read block at offset %u\n", - offset); - brelse(bh); - return -EIO; - } - - *bhp = bh; - return 0; -} - - -/* - * Count the number of in-use tags in a journal descriptor block. - */ - -static int count_tags(struct buffer_head *bh, int size) -{ - char * tagp; - journal_block_tag_t * tag; - int nr = 0; - - tagp = &bh->b_data[sizeof(journal_header_t)]; - - while ((tagp - bh->b_data + sizeof(journal_block_tag_t)) <= size) { - tag = (journal_block_tag_t *) tagp; - - nr++; - tagp += sizeof(journal_block_tag_t); - if (!(tag->t_flags & cpu_to_be32(JFS_FLAG_SAME_UUID))) - tagp += 16; - - if (tag->t_flags & cpu_to_be32(JFS_FLAG_LAST_TAG)) - break; - } - - return nr; -} - - -/* Make sure we wrap around the log correctly! */ -#define wrap(journal, var) \ -do { \ - if (var >= (journal)->j_last) \ - var -= ((journal)->j_last - (journal)->j_first); \ -} while (0) - -/** - * journal_recover - recovers a on-disk journal - * @journal: the journal to recover - * - * The primary function for recovering the log contents when mounting a - * journaled device. - * - * Recovery is done in three passes. In the first pass, we look for the - * end of the log. In the second, we assemble the list of revoke - * blocks. In the third and final pass, we replay any un-revoked blocks - * in the log. - */ -int journal_recover(journal_t *journal) -{ - int err, err2; - journal_superblock_t * sb; - - struct recovery_info info; - - memset(&info, 0, sizeof(info)); - sb = journal->j_superblock; - - /* - * The journal superblock's s_start field (the current log head) - * is always zero if, and only if, the journal was cleanly - * unmounted. - */ - - if (!sb->s_start) { - jbd_debug(1, "No recovery required, last transaction %d\n", - be32_to_cpu(sb->s_sequence)); - journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1; - return 0; - } - - err = do_one_pass(journal, &info, PASS_SCAN); - if (!err) - err = do_one_pass(journal, &info, PASS_REVOKE); - if (!err) - err = do_one_pass(journal, &info, PASS_REPLAY); - - jbd_debug(1, "JBD: recovery, exit status %d, " - "recovered transactions %u to %u\n", - err, info.start_transaction, info.end_transaction); - jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n", - info.nr_replays, info.nr_revoke_hits, info.nr_revokes); - - /* Restart the log at the next transaction ID, thus invalidating - * any existing commit records in the log. */ - journal->j_transaction_sequence = ++info.end_transaction; - - journal_clear_revoke(journal); - err2 = sync_blockdev(journal->j_fs_dev); - if (!err) - err = err2; - /* Flush disk caches to get replayed data on the permanent storage */ - if (journal->j_flags & JFS_BARRIER) { - err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); - if (!err) - err = err2; - } - - return err; -} - -/** - * journal_skip_recovery - Start journal and wipe exiting records - * @journal: journal to startup - * - * Locate any valid recovery information from the journal and set up the - * journal structures in memory to ignore it (presumably because the - * caller has evidence that it is out of date). - * This function does'nt appear to be exorted.. - * - * We perform one pass over the journal to allow us to tell the user how - * much recovery information is being erased, and to let us initialise - * the journal transaction sequence numbers to the next unused ID. - */ -int journal_skip_recovery(journal_t *journal) -{ - int err; - struct recovery_info info; - - memset (&info, 0, sizeof(info)); - - err = do_one_pass(journal, &info, PASS_SCAN); - - if (err) { - printk(KERN_ERR "JBD: error %d scanning journal\n", err); - ++journal->j_transaction_sequence; - } else { -#ifdef CONFIG_JBD_DEBUG - int dropped = info.end_transaction - - be32_to_cpu(journal->j_superblock->s_sequence); - jbd_debug(1, - "JBD: ignoring %d transaction%s from the journal.\n", - dropped, (dropped == 1) ? "" : "s"); -#endif - journal->j_transaction_sequence = ++info.end_transaction; - } - - journal->j_tail = 0; - return err; -} - -static int do_one_pass(journal_t *journal, - struct recovery_info *info, enum passtype pass) -{ - unsigned int first_commit_ID, next_commit_ID; - unsigned int next_log_block; - int err, success = 0; - journal_superblock_t * sb; - journal_header_t * tmp; - struct buffer_head * bh; - unsigned int sequence; - int blocktype; - - /* - * First thing is to establish what we expect to find in the log - * (in terms of transaction IDs), and where (in terms of log - * block offsets): query the superblock. - */ - - sb = journal->j_superblock; - next_commit_ID = be32_to_cpu(sb->s_sequence); - next_log_block = be32_to_cpu(sb->s_start); - - first_commit_ID = next_commit_ID; - if (pass == PASS_SCAN) - info->start_transaction = first_commit_ID; - - jbd_debug(1, "Starting recovery pass %d\n", pass); - - /* - * Now we walk through the log, transaction by transaction, - * making sure that each transaction has a commit block in the - * expected place. Each complete transaction gets replayed back - * into the main filesystem. - */ - - while (1) { - int flags; - char * tagp; - journal_block_tag_t * tag; - struct buffer_head * obh; - struct buffer_head * nbh; - - cond_resched(); - - /* If we already know where to stop the log traversal, - * check right now that we haven't gone past the end of - * the log. */ - - if (pass != PASS_SCAN) - if (tid_geq(next_commit_ID, info->end_transaction)) - break; - - jbd_debug(2, "Scanning for sequence ID %u at %u/%u\n", - next_commit_ID, next_log_block, journal->j_last); - - /* Skip over each chunk of the transaction looking - * either the next descriptor block or the final commit - * record. */ - - jbd_debug(3, "JBD: checking block %u\n", next_log_block); - err = jread(&bh, journal, next_log_block); - if (err) - goto failed; - - next_log_block++; - wrap(journal, next_log_block); - - /* What kind of buffer is it? - * - * If it is a descriptor block, check that it has the - * expected sequence number. Otherwise, we're all done - * here. */ - - tmp = (journal_header_t *)bh->b_data; - - if (tmp->h_magic != cpu_to_be32(JFS_MAGIC_NUMBER)) { - brelse(bh); - break; - } - - blocktype = be32_to_cpu(tmp->h_blocktype); - sequence = be32_to_cpu(tmp->h_sequence); - jbd_debug(3, "Found magic %d, sequence %d\n", - blocktype, sequence); - - if (sequence != next_commit_ID) { - brelse(bh); - break; - } - - /* OK, we have a valid descriptor block which matches - * all of the sequence number checks. What are we going - * to do with it? That depends on the pass... */ - - switch(blocktype) { - case JFS_DESCRIPTOR_BLOCK: - /* If it is a valid descriptor block, replay it - * in pass REPLAY; otherwise, just skip over the - * blocks it describes. */ - if (pass != PASS_REPLAY) { - next_log_block += - count_tags(bh, journal->j_blocksize); - wrap(journal, next_log_block); - brelse(bh); - continue; - } - - /* A descriptor block: we can now write all of - * the data blocks. Yay, useful work is finally - * getting done here! */ - - tagp = &bh->b_data[sizeof(journal_header_t)]; - while ((tagp - bh->b_data +sizeof(journal_block_tag_t)) - <= journal->j_blocksize) { - unsigned int io_block; - - tag = (journal_block_tag_t *) tagp; - flags = be32_to_cpu(tag->t_flags); - - io_block = next_log_block++; - wrap(journal, next_log_block); - err = jread(&obh, journal, io_block); - if (err) { - /* Recover what we can, but - * report failure at the end. */ - success = err; - printk (KERN_ERR - "JBD: IO error %d recovering " - "block %u in log\n", - err, io_block); - } else { - unsigned int blocknr; - - J_ASSERT(obh != NULL); - blocknr = be32_to_cpu(tag->t_blocknr); - - /* If the block has been - * revoked, then we're all done - * here. */ - if (journal_test_revoke - (journal, blocknr, - next_commit_ID)) { - brelse(obh); - ++info->nr_revoke_hits; - goto skip_write; - } - - /* Find a buffer for the new - * data being restored */ - nbh = __getblk(journal->j_fs_dev, - blocknr, - journal->j_blocksize); - if (nbh == NULL) { - printk(KERN_ERR - "JBD: Out of memory " - "during recovery.\n"); - err = -ENOMEM; - brelse(bh); - brelse(obh); - goto failed; - } - - lock_buffer(nbh); - memcpy(nbh->b_data, obh->b_data, - journal->j_blocksize); - if (flags & JFS_FLAG_ESCAPE) { - *((__be32 *)nbh->b_data) = - cpu_to_be32(JFS_MAGIC_NUMBER); - } - - BUFFER_TRACE(nbh, "marking dirty"); - set_buffer_uptodate(nbh); - mark_buffer_dirty(nbh); - BUFFER_TRACE(nbh, "marking uptodate"); - ++info->nr_replays; - /* ll_rw_block(WRITE, 1, &nbh); */ - unlock_buffer(nbh); - brelse(obh); - brelse(nbh); - } - - skip_write: - tagp += sizeof(journal_block_tag_t); - if (!(flags & JFS_FLAG_SAME_UUID)) - tagp += 16; - - if (flags & JFS_FLAG_LAST_TAG) - break; - } - - brelse(bh); - continue; - - case JFS_COMMIT_BLOCK: - /* Found an expected commit block: not much to - * do other than move on to the next sequence - * number. */ - brelse(bh); - next_commit_ID++; - continue; - - case JFS_REVOKE_BLOCK: - /* If we aren't in the REVOKE pass, then we can - * just skip over this block. */ - if (pass != PASS_REVOKE) { - brelse(bh); - continue; - } - - err = scan_revoke_records(journal, bh, - next_commit_ID, info); - brelse(bh); - if (err) - goto failed; - continue; - - default: - jbd_debug(3, "Unrecognised magic %d, end of scan.\n", - blocktype); - brelse(bh); - goto done; - } - } - - done: - /* - * We broke out of the log scan loop: either we came to the - * known end of the log or we found an unexpected block in the - * log. If the latter happened, then we know that the "current" - * transaction marks the end of the valid log. - */ - - if (pass == PASS_SCAN) - info->end_transaction = next_commit_ID; - else { - /* It's really bad news if different passes end up at - * different places (but possible due to IO errors). */ - if (info->end_transaction != next_commit_ID) { - printk (KERN_ERR "JBD: recovery pass %d ended at " - "transaction %u, expected %u\n", - pass, next_commit_ID, info->end_transaction); - if (!success) - success = -EIO; - } - } - - return success; - - failed: - return err; -} - - -/* Scan a revoke record, marking all blocks mentioned as revoked. */ - -static int scan_revoke_records(journal_t *journal, struct buffer_head *bh, - tid_t sequence, struct recovery_info *info) -{ - journal_revoke_header_t *header; - int offset, max; - - header = (journal_revoke_header_t *) bh->b_data; - offset = sizeof(journal_revoke_header_t); - max = be32_to_cpu(header->r_count); - - while (offset < max) { - unsigned int blocknr; - int err; - - blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset))); - offset += 4; - err = journal_set_revoke(journal, blocknr, sequence); - if (err) - return err; - ++info->nr_revokes; - } - return 0; -} diff --git a/kernel/fs/jbd/revoke.c b/kernel/fs/jbd/revoke.c deleted file mode 100644 index dcead636c..000000000 --- a/kernel/fs/jbd/revoke.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * linux/fs/jbd/revoke.c - * - * Written by Stephen C. Tweedie , 2000 - * - * Copyright 2000 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal revoke routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - * - * Revoke is the mechanism used to prevent old log records for deleted - * metadata from being replayed on top of newer data using the same - * blocks. The revoke mechanism is used in two separate places: - * - * + Commit: during commit we write the entire list of the current - * transaction's revoked blocks to the journal - * - * + Recovery: during recovery we record the transaction ID of all - * revoked blocks. If there are multiple revoke records in the log - * for a single block, only the last one counts, and if there is a log - * entry for a block beyond the last revoke, then that log entry still - * gets replayed. - * - * We can get interactions between revokes and new log data within a - * single transaction: - * - * Block is revoked and then journaled: - * The desired end result is the journaling of the new block, so we - * cancel the revoke before the transaction commits. - * - * Block is journaled and then revoked: - * The revoke must take precedence over the write of the block, so we - * need either to cancel the journal entry or to write the revoke - * later in the log than the log block. In this case, we choose the - * latter: journaling a block cancels any revoke record for that block - * in the current transaction, so any revoke for that block in the - * transaction must have happened after the block was journaled and so - * the revoke must take precedence. - * - * Block is revoked and then written as data: - * The data write is allowed to succeed, but the revoke is _not_ - * cancelled. We still need to prevent old log records from - * overwriting the new data. We don't even need to clear the revoke - * bit here. - * - * We cache revoke status of a buffer in the current transaction in b_states - * bits. As the name says, revokevalid flag indicates that the cached revoke - * status of a buffer is valid and we can rely on the cached status. - * - * Revoke information on buffers is a tri-state value: - * - * RevokeValid clear: no cached revoke status, need to look it up - * RevokeValid set, Revoked clear: - * buffer has not been revoked, and cancel_revoke - * need do nothing. - * RevokeValid set, Revoked set: - * buffer has been revoked. - * - * Locking rules: - * We keep two hash tables of revoke records. One hashtable belongs to the - * running transaction (is pointed to by journal->j_revoke), the other one - * belongs to the committing transaction. Accesses to the second hash table - * happen only from the kjournald and no other thread touches this table. Also - * journal_switch_revoke_table() which switches which hashtable belongs to the - * running and which to the committing transaction is called only from - * kjournald. Therefore we need no locks when accessing the hashtable belonging - * to the committing transaction. - * - * All users operating on the hash table belonging to the running transaction - * have a handle to the transaction. Therefore they are safe from kjournald - * switching hash tables under them. For operations on the lists of entries in - * the hash table j_revoke_lock is used. - * - * Finally, also replay code uses the hash tables but at this moment no one else - * can touch them (filesystem isn't mounted yet) and hence no locking is - * needed. - */ - -#ifndef __KERNEL__ -#include "jfs_user.h" -#else -#include -#include -#include -#include -#include -#include -#include -#include -#endif -#include -#include - -static struct kmem_cache *revoke_record_cache; -static struct kmem_cache *revoke_table_cache; - -/* Each revoke record represents one single revoked block. During - journal replay, this involves recording the transaction ID of the - last transaction to revoke this block. */ - -struct jbd_revoke_record_s -{ - struct list_head hash; - tid_t sequence; /* Used for recovery only */ - unsigned int blocknr; -}; - - -/* The revoke table is just a simple hash table of revoke records. */ -struct jbd_revoke_table_s -{ - /* It is conceivable that we might want a larger hash table - * for recovery. Must be a power of two. */ - int hash_size; - int hash_shift; - struct list_head *hash_table; -}; - - -#ifdef __KERNEL__ -static void write_one_revoke_record(journal_t *, transaction_t *, - struct journal_head **, int *, - struct jbd_revoke_record_s *, int); -static void flush_descriptor(journal_t *, struct journal_head *, int, int); -#endif - -/* Utility functions to maintain the revoke table */ - -static inline int hash(journal_t *journal, unsigned int block) -{ - struct jbd_revoke_table_s *table = journal->j_revoke; - - return hash_32(block, table->hash_shift); -} - -static int insert_revoke_hash(journal_t *journal, unsigned int blocknr, - tid_t seq) -{ - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - -repeat: - record = kmem_cache_alloc(revoke_record_cache, GFP_NOFS); - if (!record) - goto oom; - - record->sequence = seq; - record->blocknr = blocknr; - hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; - spin_lock(&journal->j_revoke_lock); - list_add(&record->hash, hash_list); - spin_unlock(&journal->j_revoke_lock); - return 0; - -oom: - if (!journal_oom_retry) - return -ENOMEM; - jbd_debug(1, "ENOMEM in %s, retrying\n", __func__); - yield(); - goto repeat; -} - -/* Find a revoke record in the journal's hash table. */ - -static struct jbd_revoke_record_s *find_revoke_record(journal_t *journal, - unsigned int blocknr) -{ - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - - hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; - - spin_lock(&journal->j_revoke_lock); - record = (struct jbd_revoke_record_s *) hash_list->next; - while (&(record->hash) != hash_list) { - if (record->blocknr == blocknr) { - spin_unlock(&journal->j_revoke_lock); - return record; - } - record = (struct jbd_revoke_record_s *) record->hash.next; - } - spin_unlock(&journal->j_revoke_lock); - return NULL; -} - -void journal_destroy_revoke_caches(void) -{ - if (revoke_record_cache) { - kmem_cache_destroy(revoke_record_cache); - revoke_record_cache = NULL; - } - if (revoke_table_cache) { - kmem_cache_destroy(revoke_table_cache); - revoke_table_cache = NULL; - } -} - -int __init journal_init_revoke_caches(void) -{ - J_ASSERT(!revoke_record_cache); - J_ASSERT(!revoke_table_cache); - - revoke_record_cache = kmem_cache_create("revoke_record", - sizeof(struct jbd_revoke_record_s), - 0, - SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY, - NULL); - if (!revoke_record_cache) - goto record_cache_failure; - - revoke_table_cache = kmem_cache_create("revoke_table", - sizeof(struct jbd_revoke_table_s), - 0, SLAB_TEMPORARY, NULL); - if (!revoke_table_cache) - goto table_cache_failure; - - return 0; - -table_cache_failure: - journal_destroy_revoke_caches(); -record_cache_failure: - return -ENOMEM; -} - -static struct jbd_revoke_table_s *journal_init_revoke_table(int hash_size) -{ - int i; - struct jbd_revoke_table_s *table; - - table = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL); - if (!table) - goto out; - - table->hash_size = hash_size; - table->hash_shift = ilog2(hash_size); - table->hash_table = - kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL); - if (!table->hash_table) { - kmem_cache_free(revoke_table_cache, table); - table = NULL; - goto out; - } - - for (i = 0; i < hash_size; i++) - INIT_LIST_HEAD(&table->hash_table[i]); - -out: - return table; -} - -static void journal_destroy_revoke_table(struct jbd_revoke_table_s *table) -{ - int i; - struct list_head *hash_list; - - for (i = 0; i < table->hash_size; i++) { - hash_list = &table->hash_table[i]; - J_ASSERT(list_empty(hash_list)); - } - - kfree(table->hash_table); - kmem_cache_free(revoke_table_cache, table); -} - -/* Initialise the revoke table for a given journal to a given size. */ -int journal_init_revoke(journal_t *journal, int hash_size) -{ - J_ASSERT(journal->j_revoke_table[0] == NULL); - J_ASSERT(is_power_of_2(hash_size)); - - journal->j_revoke_table[0] = journal_init_revoke_table(hash_size); - if (!journal->j_revoke_table[0]) - goto fail0; - - journal->j_revoke_table[1] = journal_init_revoke_table(hash_size); - if (!journal->j_revoke_table[1]) - goto fail1; - - journal->j_revoke = journal->j_revoke_table[1]; - - spin_lock_init(&journal->j_revoke_lock); - - return 0; - -fail1: - journal_destroy_revoke_table(journal->j_revoke_table[0]); -fail0: - return -ENOMEM; -} - -/* Destroy a journal's revoke table. The table must already be empty! */ -void journal_destroy_revoke(journal_t *journal) -{ - journal->j_revoke = NULL; - if (journal->j_revoke_table[0]) - journal_destroy_revoke_table(journal->j_revoke_table[0]); - if (journal->j_revoke_table[1]) - journal_destroy_revoke_table(journal->j_revoke_table[1]); -} - - -#ifdef __KERNEL__ - -/* - * journal_revoke: revoke a given buffer_head from the journal. This - * prevents the block from being replayed during recovery if we take a - * crash after this current transaction commits. Any subsequent - * metadata writes of the buffer in this transaction cancel the - * revoke. - * - * Note that this call may block --- it is up to the caller to make - * sure that there are no further calls to journal_write_metadata - * before the revoke is complete. In ext3, this implies calling the - * revoke before clearing the block bitmap when we are deleting - * metadata. - * - * Revoke performs a journal_forget on any buffer_head passed in as a - * parameter, but does _not_ forget the buffer_head if the bh was only - * found implicitly. - * - * bh_in may not be a journalled buffer - it may have come off - * the hash tables without an attached journal_head. - * - * If bh_in is non-zero, journal_revoke() will decrement its b_count - * by one. - */ - -int journal_revoke(handle_t *handle, unsigned int blocknr, - struct buffer_head *bh_in) -{ - struct buffer_head *bh = NULL; - journal_t *journal; - struct block_device *bdev; - int err; - - might_sleep(); - if (bh_in) - BUFFER_TRACE(bh_in, "enter"); - - journal = handle->h_transaction->t_journal; - if (!journal_set_features(journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)){ - J_ASSERT (!"Cannot set revoke feature!"); - return -EINVAL; - } - - bdev = journal->j_fs_dev; - bh = bh_in; - - if (!bh) { - bh = __find_get_block(bdev, blocknr, journal->j_blocksize); - if (bh) - BUFFER_TRACE(bh, "found on hash"); - } -#ifdef JBD_EXPENSIVE_CHECKING - else { - struct buffer_head *bh2; - - /* If there is a different buffer_head lying around in - * memory anywhere... */ - bh2 = __find_get_block(bdev, blocknr, journal->j_blocksize); - if (bh2) { - /* ... and it has RevokeValid status... */ - if (bh2 != bh && buffer_revokevalid(bh2)) - /* ...then it better be revoked too, - * since it's illegal to create a revoke - * record against a buffer_head which is - * not marked revoked --- that would - * risk missing a subsequent revoke - * cancel. */ - J_ASSERT_BH(bh2, buffer_revoked(bh2)); - put_bh(bh2); - } - } -#endif - - /* We really ought not ever to revoke twice in a row without - first having the revoke cancelled: it's illegal to free a - block twice without allocating it in between! */ - if (bh) { - if (!J_EXPECT_BH(bh, !buffer_revoked(bh), - "inconsistent data on disk")) { - if (!bh_in) - brelse(bh); - return -EIO; - } - set_buffer_revoked(bh); - set_buffer_revokevalid(bh); - if (bh_in) { - BUFFER_TRACE(bh_in, "call journal_forget"); - journal_forget(handle, bh_in); - } else { - BUFFER_TRACE(bh, "call brelse"); - __brelse(bh); - } - } - - jbd_debug(2, "insert revoke for block %u, bh_in=%p\n", blocknr, bh_in); - err = insert_revoke_hash(journal, blocknr, - handle->h_transaction->t_tid); - BUFFER_TRACE(bh_in, "exit"); - return err; -} - -/* - * Cancel an outstanding revoke. For use only internally by the - * journaling code (called from journal_get_write_access). - * - * We trust buffer_revoked() on the buffer if the buffer is already - * being journaled: if there is no revoke pending on the buffer, then we - * don't do anything here. - * - * This would break if it were possible for a buffer to be revoked and - * discarded, and then reallocated within the same transaction. In such - * a case we would have lost the revoked bit, but when we arrived here - * the second time we would still have a pending revoke to cancel. So, - * do not trust the Revoked bit on buffers unless RevokeValid is also - * set. - */ -int journal_cancel_revoke(handle_t *handle, struct journal_head *jh) -{ - struct jbd_revoke_record_s *record; - journal_t *journal = handle->h_transaction->t_journal; - int need_cancel; - int did_revoke = 0; /* akpm: debug */ - struct buffer_head *bh = jh2bh(jh); - - jbd_debug(4, "journal_head %p, cancelling revoke\n", jh); - - /* Is the existing Revoke bit valid? If so, we trust it, and - * only perform the full cancel if the revoke bit is set. If - * not, we can't trust the revoke bit, and we need to do the - * full search for a revoke record. */ - if (test_set_buffer_revokevalid(bh)) { - need_cancel = test_clear_buffer_revoked(bh); - } else { - need_cancel = 1; - clear_buffer_revoked(bh); - } - - if (need_cancel) { - record = find_revoke_record(journal, bh->b_blocknr); - if (record) { - jbd_debug(4, "cancelled existing revoke on " - "blocknr %llu\n", (unsigned long long)bh->b_blocknr); - spin_lock(&journal->j_revoke_lock); - list_del(&record->hash); - spin_unlock(&journal->j_revoke_lock); - kmem_cache_free(revoke_record_cache, record); - did_revoke = 1; - } - } - -#ifdef JBD_EXPENSIVE_CHECKING - /* There better not be one left behind by now! */ - record = find_revoke_record(journal, bh->b_blocknr); - J_ASSERT_JH(jh, record == NULL); -#endif - - /* Finally, have we just cleared revoke on an unhashed - * buffer_head? If so, we'd better make sure we clear the - * revoked status on any hashed alias too, otherwise the revoke - * state machine will get very upset later on. */ - if (need_cancel) { - struct buffer_head *bh2; - bh2 = __find_get_block(bh->b_bdev, bh->b_blocknr, bh->b_size); - if (bh2) { - if (bh2 != bh) - clear_buffer_revoked(bh2); - __brelse(bh2); - } - } - return did_revoke; -} - -/* - * journal_clear_revoked_flags clears revoked flag of buffers in - * revoke table to reflect there is no revoked buffer in the next - * transaction which is going to be started. - */ -void journal_clear_buffer_revoked_flags(journal_t *journal) -{ - struct jbd_revoke_table_s *revoke = journal->j_revoke; - int i = 0; - - for (i = 0; i < revoke->hash_size; i++) { - struct list_head *hash_list; - struct list_head *list_entry; - hash_list = &revoke->hash_table[i]; - - list_for_each(list_entry, hash_list) { - struct jbd_revoke_record_s *record; - struct buffer_head *bh; - record = (struct jbd_revoke_record_s *)list_entry; - bh = __find_get_block(journal->j_fs_dev, - record->blocknr, - journal->j_blocksize); - if (bh) { - clear_buffer_revoked(bh); - __brelse(bh); - } - } - } -} - -/* journal_switch_revoke table select j_revoke for next transaction - * we do not want to suspend any processing until all revokes are - * written -bzzz - */ -void journal_switch_revoke_table(journal_t *journal) -{ - int i; - - if (journal->j_revoke == journal->j_revoke_table[0]) - journal->j_revoke = journal->j_revoke_table[1]; - else - journal->j_revoke = journal->j_revoke_table[0]; - - for (i = 0; i < journal->j_revoke->hash_size; i++) - INIT_LIST_HEAD(&journal->j_revoke->hash_table[i]); -} - -/* - * Write revoke records to the journal for all entries in the current - * revoke hash, deleting the entries as we go. - */ -void journal_write_revoke_records(journal_t *journal, - transaction_t *transaction, int write_op) -{ - struct journal_head *descriptor; - struct jbd_revoke_record_s *record; - struct jbd_revoke_table_s *revoke; - struct list_head *hash_list; - int i, offset, count; - - descriptor = NULL; - offset = 0; - count = 0; - - /* select revoke table for committing transaction */ - revoke = journal->j_revoke == journal->j_revoke_table[0] ? - journal->j_revoke_table[1] : journal->j_revoke_table[0]; - - for (i = 0; i < revoke->hash_size; i++) { - hash_list = &revoke->hash_table[i]; - - while (!list_empty(hash_list)) { - record = (struct jbd_revoke_record_s *) - hash_list->next; - write_one_revoke_record(journal, transaction, - &descriptor, &offset, - record, write_op); - count++; - list_del(&record->hash); - kmem_cache_free(revoke_record_cache, record); - } - } - if (descriptor) - flush_descriptor(journal, descriptor, offset, write_op); - jbd_debug(1, "Wrote %d revoke records\n", count); -} - -/* - * Write out one revoke record. We need to create a new descriptor - * block if the old one is full or if we have not already created one. - */ - -static void write_one_revoke_record(journal_t *journal, - transaction_t *transaction, - struct journal_head **descriptorp, - int *offsetp, - struct jbd_revoke_record_s *record, - int write_op) -{ - struct journal_head *descriptor; - int offset; - journal_header_t *header; - - /* If we are already aborting, this all becomes a noop. We - still need to go round the loop in - journal_write_revoke_records in order to free all of the - revoke records: only the IO to the journal is omitted. */ - if (is_journal_aborted(journal)) - return; - - descriptor = *descriptorp; - offset = *offsetp; - - /* Make sure we have a descriptor with space left for the record */ - if (descriptor) { - if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset, write_op); - descriptor = NULL; - } - } - - if (!descriptor) { - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) - return; - header = (journal_header_t *) &jh2bh(descriptor)->b_data[0]; - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_REVOKE_BLOCK); - header->h_sequence = cpu_to_be32(transaction->t_tid); - - /* Record it so that we can wait for IO completion later */ - JBUFFER_TRACE(descriptor, "file as BJ_LogCtl"); - journal_file_buffer(descriptor, transaction, BJ_LogCtl); - - offset = sizeof(journal_revoke_header_t); - *descriptorp = descriptor; - } - - * ((__be32 *)(&jh2bh(descriptor)->b_data[offset])) = - cpu_to_be32(record->blocknr); - offset += 4; - *offsetp = offset; -} - -/* - * Flush a revoke descriptor out to the journal. If we are aborting, - * this is a noop; otherwise we are generating a buffer which needs to - * be waited for during commit, so it has to go onto the appropriate - * journal buffer list. - */ - -static void flush_descriptor(journal_t *journal, - struct journal_head *descriptor, - int offset, int write_op) -{ - journal_revoke_header_t *header; - struct buffer_head *bh = jh2bh(descriptor); - - if (is_journal_aborted(journal)) { - put_bh(bh); - return; - } - - header = (journal_revoke_header_t *) jh2bh(descriptor)->b_data; - header->r_count = cpu_to_be32(offset); - set_buffer_jwrite(bh); - BUFFER_TRACE(bh, "write"); - set_buffer_dirty(bh); - write_dirty_buffer(bh, write_op); -} -#endif - -/* - * Revoke support for recovery. - * - * Recovery needs to be able to: - * - * record all revoke records, including the tid of the latest instance - * of each revoke in the journal - * - * check whether a given block in a given transaction should be replayed - * (ie. has not been revoked by a revoke record in that or a subsequent - * transaction) - * - * empty the revoke table after recovery. - */ - -/* - * First, setting revoke records. We create a new revoke record for - * every block ever revoked in the log as we scan it for recovery, and - * we update the existing records if we find multiple revokes for a - * single block. - */ - -int journal_set_revoke(journal_t *journal, - unsigned int blocknr, - tid_t sequence) -{ - struct jbd_revoke_record_s *record; - - record = find_revoke_record(journal, blocknr); - if (record) { - /* If we have multiple occurrences, only record the - * latest sequence number in the hashed record */ - if (tid_gt(sequence, record->sequence)) - record->sequence = sequence; - return 0; - } - return insert_revoke_hash(journal, blocknr, sequence); -} - -/* - * Test revoke records. For a given block referenced in the log, has - * that block been revoked? A revoke record with a given transaction - * sequence number revokes all blocks in that transaction and earlier - * ones, but later transactions still need replayed. - */ - -int journal_test_revoke(journal_t *journal, - unsigned int blocknr, - tid_t sequence) -{ - struct jbd_revoke_record_s *record; - - record = find_revoke_record(journal, blocknr); - if (!record) - return 0; - if (tid_gt(sequence, record->sequence)) - return 0; - return 1; -} - -/* - * Finally, once recovery is over, we need to clear the revoke table so - * that it can be reused by the running filesystem. - */ - -void journal_clear_revoke(journal_t *journal) -{ - int i; - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - struct jbd_revoke_table_s *revoke; - - revoke = journal->j_revoke; - - for (i = 0; i < revoke->hash_size; i++) { - hash_list = &revoke->hash_table[i]; - while (!list_empty(hash_list)) { - record = (struct jbd_revoke_record_s*) hash_list->next; - list_del(&record->hash); - kmem_cache_free(revoke_record_cache, record); - } - } -} diff --git a/kernel/fs/jbd/transaction.c b/kernel/fs/jbd/transaction.c deleted file mode 100644 index 1695ba833..000000000 --- a/kernel/fs/jbd/transaction.c +++ /dev/null @@ -1,2237 +0,0 @@ -/* - * linux/fs/jbd/transaction.c - * - * Written by Stephen C. Tweedie , 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Generic filesystem transaction handling code; part of the ext2fs - * journaling system. - * - * This file manages transactions (compound commits managed by the - * journaling code) and handles (individual atomic operations by the - * filesystem). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __journal_temp_unlink_buffer(struct journal_head *jh); - -/* - * get_transaction: obtain a new transaction_t object. - * - * Simply allocate and initialise a new transaction. Create it in - * RUNNING state and add it to the current journal (which should not - * have an existing running transaction: we only make a new transaction - * once we have started to commit the old one). - * - * Preconditions: - * The journal MUST be locked. We don't perform atomic mallocs on the - * new transaction and we can't block without protecting against other - * processes trying to touch the journal while it is in transition. - * - * Called under j_state_lock - */ - -static transaction_t * -get_transaction(journal_t *journal, transaction_t *transaction) -{ - transaction->t_journal = journal; - transaction->t_state = T_RUNNING; - transaction->t_start_time = ktime_get(); - transaction->t_tid = journal->j_transaction_sequence++; - transaction->t_expires = jiffies + journal->j_commit_interval; - spin_lock_init(&transaction->t_handle_lock); - - /* Set up the commit timer for the new transaction. */ - journal->j_commit_timer.expires = - round_jiffies_up(transaction->t_expires); - add_timer(&journal->j_commit_timer); - - J_ASSERT(journal->j_running_transaction == NULL); - journal->j_running_transaction = transaction; - - return transaction; -} - -/* - * Handle management. - * - * A handle_t is an object which represents a single atomic update to a - * filesystem, and which tracks all of the modifications which form part - * of that one update. - */ - -/* - * start_this_handle: Given a handle, deal with any locking or stalling - * needed to make sure that there is enough journal space for the handle - * to begin. Attach the handle to a transaction and set up the - * transaction's buffer credits. - */ - -static int start_this_handle(journal_t *journal, handle_t *handle) -{ - transaction_t *transaction; - int needed; - int nblocks = handle->h_buffer_credits; - transaction_t *new_transaction = NULL; - int ret = 0; - - if (nblocks > journal->j_max_transaction_buffers) { - printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n", - current->comm, nblocks, - journal->j_max_transaction_buffers); - ret = -ENOSPC; - goto out; - } - -alloc_transaction: - if (!journal->j_running_transaction) { - new_transaction = kzalloc(sizeof(*new_transaction), - GFP_NOFS|__GFP_NOFAIL); - if (!new_transaction) { - ret = -ENOMEM; - goto out; - } - } - - jbd_debug(3, "New handle %p going live.\n", handle); - -repeat: - - /* - * We need to hold j_state_lock until t_updates has been incremented, - * for proper journal barrier handling - */ - spin_lock(&journal->j_state_lock); -repeat_locked: - if (is_journal_aborted(journal) || - (journal->j_errno != 0 && !(journal->j_flags & JFS_ACK_ERR))) { - spin_unlock(&journal->j_state_lock); - ret = -EROFS; - goto out; - } - - /* Wait on the journal's transaction barrier if necessary */ - if (journal->j_barrier_count) { - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_transaction_locked, - journal->j_barrier_count == 0); - goto repeat; - } - - if (!journal->j_running_transaction) { - if (!new_transaction) { - spin_unlock(&journal->j_state_lock); - goto alloc_transaction; - } - get_transaction(journal, new_transaction); - new_transaction = NULL; - } - - transaction = journal->j_running_transaction; - - /* - * If the current transaction is locked down for commit, wait for the - * lock to be released. - */ - if (transaction->t_state == T_LOCKED) { - DEFINE_WAIT(wait); - - prepare_to_wait(&journal->j_wait_transaction_locked, - &wait, TASK_UNINTERRUPTIBLE); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_transaction_locked, &wait); - goto repeat; - } - - /* - * If there is not enough space left in the log to write all potential - * buffers requested by this operation, we need to stall pending a log - * checkpoint to free some more log space. - */ - spin_lock(&transaction->t_handle_lock); - needed = transaction->t_outstanding_credits + nblocks; - - if (needed > journal->j_max_transaction_buffers) { - /* - * If the current transaction is already too large, then start - * to commit it: we can then go back and attach this handle to - * a new transaction. - */ - DEFINE_WAIT(wait); - - jbd_debug(2, "Handle %p starting new commit...\n", handle); - spin_unlock(&transaction->t_handle_lock); - prepare_to_wait(&journal->j_wait_transaction_locked, &wait, - TASK_UNINTERRUPTIBLE); - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_transaction_locked, &wait); - goto repeat; - } - - /* - * The commit code assumes that it can get enough log space - * without forcing a checkpoint. This is *critical* for - * correctness: a checkpoint of a buffer which is also - * associated with a committing transaction creates a deadlock, - * so commit simply cannot force through checkpoints. - * - * We must therefore ensure the necessary space in the journal - * *before* starting to dirty potentially checkpointed buffers - * in the new transaction. - * - * The worst part is, any transaction currently committing can - * reduce the free space arbitrarily. Be careful to account for - * those buffers when checkpointing. - */ - - /* - * @@@ AKPM: This seems rather over-defensive. We're giving commit - * a _lot_ of headroom: 1/4 of the journal plus the size of - * the committing transaction. Really, we only need to give it - * committing_transaction->t_outstanding_credits plus "enough" for - * the log control blocks. - * Also, this test is inconsistent with the matching one in - * journal_extend(). - */ - if (__log_space_left(journal) < jbd_space_needed(journal)) { - jbd_debug(2, "Handle %p waiting for checkpoint...\n", handle); - spin_unlock(&transaction->t_handle_lock); - __log_wait_for_space(journal); - goto repeat_locked; - } - - /* OK, account for the buffers that this operation expects to - * use and add the handle to the running transaction. */ - - handle->h_transaction = transaction; - transaction->t_outstanding_credits += nblocks; - transaction->t_updates++; - transaction->t_handle_count++; - jbd_debug(4, "Handle %p given %d credits (total %d, free %d)\n", - handle, nblocks, transaction->t_outstanding_credits, - __log_space_left(journal)); - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - - lock_map_acquire(&handle->h_lockdep_map); -out: - if (unlikely(new_transaction)) /* It's usually NULL */ - kfree(new_transaction); - return ret; -} - -static struct lock_class_key jbd_handle_key; - -/* Allocate a new handle. This should probably be in a slab... */ -static handle_t *new_handle(int nblocks) -{ - handle_t *handle = jbd_alloc_handle(GFP_NOFS); - if (!handle) - return NULL; - handle->h_buffer_credits = nblocks; - handle->h_ref = 1; - - lockdep_init_map(&handle->h_lockdep_map, "jbd_handle", &jbd_handle_key, 0); - - return handle; -} - -/** - * handle_t *journal_start() - Obtain a new handle. - * @journal: Journal to start transaction on. - * @nblocks: number of block buffer we might modify - * - * We make sure that the transaction can guarantee at least nblocks of - * modified buffers in the log. We block until the log can guarantee - * that much space. - * - * This function is visible to journal users (like ext3fs), so is not - * called with the journal already locked. - * - * Return a pointer to a newly allocated handle, or an ERR_PTR() value - * on failure. - */ -handle_t *journal_start(journal_t *journal, int nblocks) -{ - handle_t *handle = journal_current_handle(); - int err; - - if (!journal) - return ERR_PTR(-EROFS); - - if (handle) { - J_ASSERT(handle->h_transaction->t_journal == journal); - handle->h_ref++; - return handle; - } - - handle = new_handle(nblocks); - if (!handle) - return ERR_PTR(-ENOMEM); - - current->journal_info = handle; - - err = start_this_handle(journal, handle); - if (err < 0) { - jbd_free_handle(handle); - current->journal_info = NULL; - handle = ERR_PTR(err); - } - return handle; -} - -/** - * int journal_extend() - extend buffer credits. - * @handle: handle to 'extend' - * @nblocks: nr blocks to try to extend by. - * - * Some transactions, such as large extends and truncates, can be done - * atomically all at once or in several stages. The operation requests - * a credit for a number of buffer modications in advance, but can - * extend its credit if it needs more. - * - * journal_extend tries to give the running handle more buffer credits. - * It does not guarantee that allocation - this is a best-effort only. - * The calling process MUST be able to deal cleanly with a failure to - * extend here. - * - * Return 0 on success, non-zero on failure. - * - * return code < 0 implies an error - * return code > 0 implies normal transaction-full status. - */ -int journal_extend(handle_t *handle, int nblocks) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int result; - int wanted; - - result = -EIO; - if (is_handle_aborted(handle)) - goto out; - - result = 1; - - spin_lock(&journal->j_state_lock); - - /* Don't extend a locked-down transaction! */ - if (handle->h_transaction->t_state != T_RUNNING) { - jbd_debug(3, "denied handle %p %d blocks: " - "transaction not running\n", handle, nblocks); - goto error_out; - } - - spin_lock(&transaction->t_handle_lock); - wanted = transaction->t_outstanding_credits + nblocks; - - if (wanted > journal->j_max_transaction_buffers) { - jbd_debug(3, "denied handle %p %d blocks: " - "transaction too large\n", handle, nblocks); - goto unlock; - } - - if (wanted > __log_space_left(journal)) { - jbd_debug(3, "denied handle %p %d blocks: " - "insufficient log space\n", handle, nblocks); - goto unlock; - } - - handle->h_buffer_credits += nblocks; - transaction->t_outstanding_credits += nblocks; - result = 0; - - jbd_debug(3, "extended handle %p by %d\n", handle, nblocks); -unlock: - spin_unlock(&transaction->t_handle_lock); -error_out: - spin_unlock(&journal->j_state_lock); -out: - return result; -} - - -/** - * int journal_restart() - restart a handle. - * @handle: handle to restart - * @nblocks: nr credits requested - * - * Restart a handle for a multi-transaction filesystem - * operation. - * - * If the journal_extend() call above fails to grant new buffer credits - * to a running handle, a call to journal_restart will commit the - * handle's transaction so far and reattach the handle to a new - * transaction capabable of guaranteeing the requested number of - * credits. - */ - -int journal_restart(handle_t *handle, int nblocks) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int ret; - - /* If we've had an abort of any type, don't even think about - * actually doing the restart! */ - if (is_handle_aborted(handle)) - return 0; - - /* - * First unlink the handle from its current transaction, and start the - * commit on that. - */ - J_ASSERT(transaction->t_updates > 0); - J_ASSERT(journal_current_handle() == handle); - - spin_lock(&journal->j_state_lock); - spin_lock(&transaction->t_handle_lock); - transaction->t_outstanding_credits -= handle->h_buffer_credits; - transaction->t_updates--; - - if (!transaction->t_updates) - wake_up(&journal->j_wait_updates); - spin_unlock(&transaction->t_handle_lock); - - jbd_debug(2, "restarting handle %p\n", handle); - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - - lock_map_release(&handle->h_lockdep_map); - handle->h_buffer_credits = nblocks; - ret = start_this_handle(journal, handle); - return ret; -} - - -/** - * void journal_lock_updates () - establish a transaction barrier. - * @journal: Journal to establish a barrier on. - * - * This locks out any further updates from being started, and blocks until all - * existing updates have completed, returning only once the journal is in a - * quiescent state with no updates running. - * - * We do not use simple mutex for synchronization as there are syscalls which - * want to return with filesystem locked and that trips up lockdep. Also - * hibernate needs to lock filesystem but locked mutex then blocks hibernation. - * Since locking filesystem is rare operation, we use simple counter and - * waitqueue for locking. - */ -void journal_lock_updates(journal_t *journal) -{ - DEFINE_WAIT(wait); - -wait: - /* Wait for previous locked operation to finish */ - wait_event(journal->j_wait_transaction_locked, - journal->j_barrier_count == 0); - - spin_lock(&journal->j_state_lock); - /* - * Check reliably under the lock whether we are the ones winning the race - * and locking the journal - */ - if (journal->j_barrier_count > 0) { - spin_unlock(&journal->j_state_lock); - goto wait; - } - ++journal->j_barrier_count; - - /* Wait until there are no running updates */ - while (1) { - transaction_t *transaction = journal->j_running_transaction; - - if (!transaction) - break; - - spin_lock(&transaction->t_handle_lock); - if (!transaction->t_updates) { - spin_unlock(&transaction->t_handle_lock); - break; - } - prepare_to_wait(&journal->j_wait_updates, &wait, - TASK_UNINTERRUPTIBLE); - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_updates, &wait); - spin_lock(&journal->j_state_lock); - } - spin_unlock(&journal->j_state_lock); -} - -/** - * void journal_unlock_updates (journal_t* journal) - release barrier - * @journal: Journal to release the barrier on. - * - * Release a transaction barrier obtained with journal_lock_updates(). - */ -void journal_unlock_updates (journal_t *journal) -{ - J_ASSERT(journal->j_barrier_count != 0); - - spin_lock(&journal->j_state_lock); - --journal->j_barrier_count; - spin_unlock(&journal->j_state_lock); - wake_up(&journal->j_wait_transaction_locked); -} - -static void warn_dirty_buffer(struct buffer_head *bh) -{ - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). " - "There's a risk of filesystem corruption in case of system " - "crash.\n", - bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr); -} - -/* - * If the buffer is already part of the current transaction, then there - * is nothing we need to do. If it is already part of a prior - * transaction which we are still committing to disk, then we need to - * make sure that we do not overwrite the old copy: we do copy-out to - * preserve the copy going to disk. We also account the buffer against - * the handle's metadata buffer credits (unless the buffer is already - * part of the transaction, that is). - * - */ -static int -do_get_write_access(handle_t *handle, struct journal_head *jh, - int force_copy) -{ - struct buffer_head *bh; - transaction_t *transaction; - journal_t *journal; - int error; - char *frozen_buffer = NULL; - int need_copy = 0; - - if (is_handle_aborted(handle)) - return -EROFS; - - transaction = handle->h_transaction; - journal = transaction->t_journal; - - jbd_debug(5, "journal_head %p, force_copy %d\n", jh, force_copy); - - JBUFFER_TRACE(jh, "entry"); -repeat: - bh = jh2bh(jh); - - /* @@@ Need to check for errors here at some point. */ - - lock_buffer(bh); - jbd_lock_bh_state(bh); - - /* We now hold the buffer lock so it is safe to query the buffer - * state. Is the buffer dirty? - * - * If so, there are two possibilities. The buffer may be - * non-journaled, and undergoing a quite legitimate writeback. - * Otherwise, it is journaled, and we don't expect dirty buffers - * in that state (the buffers should be marked JBD_Dirty - * instead.) So either the IO is being done under our own - * control and this is a bug, or it's a third party IO such as - * dump(8) (which may leave the buffer scheduled for read --- - * ie. locked but not dirty) or tune2fs (which may actually have - * the buffer dirtied, ugh.) */ - - if (buffer_dirty(bh)) { - /* - * First question: is this buffer already part of the current - * transaction or the existing committing transaction? - */ - if (jh->b_transaction) { - J_ASSERT_JH(jh, - jh->b_transaction == transaction || - jh->b_transaction == - journal->j_committing_transaction); - if (jh->b_next_transaction) - J_ASSERT_JH(jh, jh->b_next_transaction == - transaction); - warn_dirty_buffer(bh); - } - /* - * In any case we need to clean the dirty flag and we must - * do it under the buffer lock to be sure we don't race - * with running write-out. - */ - JBUFFER_TRACE(jh, "Journalling dirty buffer"); - clear_buffer_dirty(bh); - set_buffer_jbddirty(bh); - } - - unlock_buffer(bh); - - error = -EROFS; - if (is_handle_aborted(handle)) { - jbd_unlock_bh_state(bh); - goto out; - } - error = 0; - - /* - * The buffer is already part of this transaction if b_transaction or - * b_next_transaction points to it - */ - if (jh->b_transaction == transaction || - jh->b_next_transaction == transaction) - goto done; - - /* - * this is the first time this transaction is touching this buffer, - * reset the modified flag - */ - jh->b_modified = 0; - - /* - * If there is already a copy-out version of this buffer, then we don't - * need to make another one - */ - if (jh->b_frozen_data) { - JBUFFER_TRACE(jh, "has frozen data"); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - jh->b_next_transaction = transaction; - goto done; - } - - /* Is there data here we need to preserve? */ - - if (jh->b_transaction && jh->b_transaction != transaction) { - JBUFFER_TRACE(jh, "owned by older transaction"); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - - /* There is one case we have to be very careful about. - * If the committing transaction is currently writing - * this buffer out to disk and has NOT made a copy-out, - * then we cannot modify the buffer contents at all - * right now. The essence of copy-out is that it is the - * extra copy, not the primary copy, which gets - * journaled. If the primary copy is already going to - * disk then we cannot do copy-out here. */ - - if (jh->b_jlist == BJ_Shadow) { - DEFINE_WAIT_BIT(wait, &bh->b_state, BH_Unshadow); - wait_queue_head_t *wqh; - - wqh = bit_waitqueue(&bh->b_state, BH_Unshadow); - - JBUFFER_TRACE(jh, "on shadow: sleep"); - jbd_unlock_bh_state(bh); - /* commit wakes up all shadow buffers after IO */ - for ( ; ; ) { - prepare_to_wait(wqh, &wait.wait, - TASK_UNINTERRUPTIBLE); - if (jh->b_jlist != BJ_Shadow) - break; - schedule(); - } - finish_wait(wqh, &wait.wait); - goto repeat; - } - - /* Only do the copy if the currently-owning transaction - * still needs it. If it is on the Forget list, the - * committing transaction is past that stage. The - * buffer had better remain locked during the kmalloc, - * but that should be true --- we hold the journal lock - * still and the buffer is already on the BUF_JOURNAL - * list so won't be flushed. - * - * Subtle point, though: if this is a get_undo_access, - * then we will be relying on the frozen_data to contain - * the new value of the committed_data record after the - * transaction, so we HAVE to force the frozen_data copy - * in that case. */ - - if (jh->b_jlist != BJ_Forget || force_copy) { - JBUFFER_TRACE(jh, "generate frozen data"); - if (!frozen_buffer) { - JBUFFER_TRACE(jh, "allocate memory for buffer"); - jbd_unlock_bh_state(bh); - frozen_buffer = - jbd_alloc(jh2bh(jh)->b_size, - GFP_NOFS); - if (!frozen_buffer) { - printk(KERN_ERR - "%s: OOM for frozen_buffer\n", - __func__); - JBUFFER_TRACE(jh, "oom!"); - error = -ENOMEM; - jbd_lock_bh_state(bh); - goto done; - } - goto repeat; - } - jh->b_frozen_data = frozen_buffer; - frozen_buffer = NULL; - need_copy = 1; - } - jh->b_next_transaction = transaction; - } - - - /* - * Finally, if the buffer is not journaled right now, we need to make - * sure it doesn't get written to disk before the caller actually - * commits the new data - */ - if (!jh->b_transaction) { - JBUFFER_TRACE(jh, "no transaction"); - J_ASSERT_JH(jh, !jh->b_next_transaction); - JBUFFER_TRACE(jh, "file as BJ_Reserved"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh, transaction, BJ_Reserved); - spin_unlock(&journal->j_list_lock); - } - -done: - if (need_copy) { - struct page *page; - int offset; - char *source; - - J_EXPECT_JH(jh, buffer_uptodate(jh2bh(jh)), - "Possible IO failure.\n"); - page = jh2bh(jh)->b_page; - offset = offset_in_page(jh2bh(jh)->b_data); - source = kmap_atomic(page); - memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size); - kunmap_atomic(source); - } - jbd_unlock_bh_state(bh); - - /* - * If we are about to journal a buffer, then any revoke pending on it is - * no longer valid - */ - journal_cancel_revoke(handle, jh); - -out: - if (unlikely(frozen_buffer)) /* It's usually NULL */ - jbd_free(frozen_buffer, bh->b_size); - - JBUFFER_TRACE(jh, "exit"); - return error; -} - -/** - * int journal_get_write_access() - notify intent to modify a buffer for metadata (not data) update. - * @handle: transaction to add buffer modifications to - * @bh: bh to be used for metadata writes - * - * Returns an error code or 0 on success. - * - * In full data journalling mode the buffer may be of type BJ_AsyncData, - * because we're write()ing a buffer which is also part of a shared mapping. - */ - -int journal_get_write_access(handle_t *handle, struct buffer_head *bh) -{ - struct journal_head *jh = journal_add_journal_head(bh); - int rc; - - /* We do not want to get caught playing with fields which the - * log thread also manipulates. Make sure that the buffer - * completes any outstanding IO before proceeding. */ - rc = do_get_write_access(handle, jh, 0); - journal_put_journal_head(jh); - return rc; -} - - -/* - * When the user wants to journal a newly created buffer_head - * (ie. getblk() returned a new buffer and we are going to populate it - * manually rather than reading off disk), then we need to keep the - * buffer_head locked until it has been completely filled with new - * data. In this case, we should be able to make the assertion that - * the bh is not already part of an existing transaction. - * - * The buffer should already be locked by the caller by this point. - * There is no lock ranking violation: it was a newly created, - * unlocked buffer beforehand. */ - -/** - * int journal_get_create_access () - notify intent to use newly created bh - * @handle: transaction to new buffer to - * @bh: new buffer. - * - * Call this if you create a new bh. - */ -int journal_get_create_access(handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh = journal_add_journal_head(bh); - int err; - - jbd_debug(5, "journal_head %p\n", jh); - err = -EROFS; - if (is_handle_aborted(handle)) - goto out; - err = 0; - - JBUFFER_TRACE(jh, "entry"); - /* - * The buffer may already belong to this transaction due to pre-zeroing - * in the filesystem's new_block code. It may also be on the previous, - * committing transaction's lists, but it HAS to be in Forget state in - * that case: the transaction must have deleted the buffer for it to be - * reused here. - */ - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - J_ASSERT_JH(jh, (jh->b_transaction == transaction || - jh->b_transaction == NULL || - (jh->b_transaction == journal->j_committing_transaction && - jh->b_jlist == BJ_Forget))); - - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, buffer_locked(jh2bh(jh))); - - if (jh->b_transaction == NULL) { - /* - * Previous journal_forget() could have left the buffer - * with jbddirty bit set because it was being committed. When - * the commit finished, we've filed the buffer for - * checkpointing and marked it dirty. Now we are reallocating - * the buffer so the transaction freeing it must have - * committed and so it's safe to clear the dirty bit. - */ - clear_buffer_dirty(jh2bh(jh)); - - /* first access by this transaction */ - jh->b_modified = 0; - - JBUFFER_TRACE(jh, "file as BJ_Reserved"); - __journal_file_buffer(jh, transaction, BJ_Reserved); - } else if (jh->b_transaction == journal->j_committing_transaction) { - /* first access by this transaction */ - jh->b_modified = 0; - - JBUFFER_TRACE(jh, "set next transaction"); - jh->b_next_transaction = transaction; - } - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - - /* - * akpm: I added this. ext3_alloc_branch can pick up new indirect - * blocks which contain freed but then revoked metadata. We need - * to cancel the revoke in case we end up freeing it yet again - * and the reallocating as data - this would cause a second revoke, - * which hits an assertion error. - */ - JBUFFER_TRACE(jh, "cancelling revoke"); - journal_cancel_revoke(handle, jh); -out: - journal_put_journal_head(jh); - return err; -} - -/** - * int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences - * @handle: transaction - * @bh: buffer to undo - * - * Sometimes there is a need to distinguish between metadata which has - * been committed to disk and that which has not. The ext3fs code uses - * this for freeing and allocating space, we have to make sure that we - * do not reuse freed space until the deallocation has been committed, - * since if we overwrote that space we would make the delete - * un-rewindable in case of a crash. - * - * To deal with that, journal_get_undo_access requests write access to a - * buffer for parts of non-rewindable operations such as delete - * operations on the bitmaps. The journaling code must keep a copy of - * the buffer's contents prior to the undo_access call until such time - * as we know that the buffer has definitely been committed to disk. - * - * We never need to know which transaction the committed data is part - * of, buffers touched here are guaranteed to be dirtied later and so - * will be committed to a new transaction in due course, at which point - * we can discard the old committed data pointer. - * - * Returns error number or 0 on success. - */ -int journal_get_undo_access(handle_t *handle, struct buffer_head *bh) -{ - int err; - struct journal_head *jh = journal_add_journal_head(bh); - char *committed_data = NULL; - - JBUFFER_TRACE(jh, "entry"); - - /* - * Do this first --- it can drop the journal lock, so we want to - * make sure that obtaining the committed_data is done - * atomically wrt. completion of any outstanding commits. - */ - err = do_get_write_access(handle, jh, 1); - if (err) - goto out; - -repeat: - if (!jh->b_committed_data) { - committed_data = jbd_alloc(jh2bh(jh)->b_size, GFP_NOFS); - if (!committed_data) { - printk(KERN_ERR "%s: No memory for committed data\n", - __func__); - err = -ENOMEM; - goto out; - } - } - - jbd_lock_bh_state(bh); - if (!jh->b_committed_data) { - /* Copy out the current buffer contents into the - * preserved, committed copy. */ - JBUFFER_TRACE(jh, "generate b_committed data"); - if (!committed_data) { - jbd_unlock_bh_state(bh); - goto repeat; - } - - jh->b_committed_data = committed_data; - committed_data = NULL; - memcpy(jh->b_committed_data, bh->b_data, bh->b_size); - } - jbd_unlock_bh_state(bh); -out: - journal_put_journal_head(jh); - if (unlikely(committed_data)) - jbd_free(committed_data, bh->b_size); - return err; -} - -/** - * int journal_dirty_data() - mark a buffer as containing dirty data to be flushed - * @handle: transaction - * @bh: bufferhead to mark - * - * Description: - * Mark a buffer as containing dirty data which needs to be flushed before - * we can commit the current transaction. - * - * The buffer is placed on the transaction's data list and is marked as - * belonging to the transaction. - * - * Returns error number or 0 on success. - * - * journal_dirty_data() can be called via page_launder->ext3_writepage - * by kswapd. - */ -int journal_dirty_data(handle_t *handle, struct buffer_head *bh) -{ - journal_t *journal = handle->h_transaction->t_journal; - int need_brelse = 0; - struct journal_head *jh; - int ret = 0; - - if (is_handle_aborted(handle)) - return ret; - - jh = journal_add_journal_head(bh); - JBUFFER_TRACE(jh, "entry"); - - /* - * The buffer could *already* be dirty. Writeout can start - * at any time. - */ - jbd_debug(4, "jh: %p, tid:%d\n", jh, handle->h_transaction->t_tid); - - /* - * What if the buffer is already part of a running transaction? - * - * There are two cases: - * 1) It is part of the current running transaction. Refile it, - * just in case we have allocated it as metadata, deallocated - * it, then reallocated it as data. - * 2) It is part of the previous, still-committing transaction. - * If all we want to do is to guarantee that the buffer will be - * written to disk before this new transaction commits, then - * being sure that the *previous* transaction has this same - * property is sufficient for us! Just leave it on its old - * transaction. - * - * In case (2), the buffer must not already exist as metadata - * --- that would violate write ordering (a transaction is free - * to write its data at any point, even before the previous - * committing transaction has committed). The caller must - * never, ever allow this to happen: there's nothing we can do - * about it in this layer. - */ - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - /* Now that we have bh_state locked, are we really still mapped? */ - if (!buffer_mapped(bh)) { - JBUFFER_TRACE(jh, "unmapped buffer, bailing out"); - goto no_journal; - } - - if (jh->b_transaction) { - JBUFFER_TRACE(jh, "has transaction"); - if (jh->b_transaction != handle->h_transaction) { - JBUFFER_TRACE(jh, "belongs to older transaction"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - - /* @@@ IS THIS TRUE ? */ - /* - * Not any more. Scenario: someone does a write() - * in data=journal mode. The buffer's transaction has - * moved into commit. Then someone does another - * write() to the file. We do the frozen data copyout - * and set b_next_transaction to point to j_running_t. - * And while we're in that state, someone does a - * writepage() in an attempt to pageout the same area - * of the file via a shared mapping. At present that - * calls journal_dirty_data(), and we get right here. - * It may be too late to journal the data. Simply - * falling through to the next test will suffice: the - * data will be dirty and wil be checkpointed. The - * ordering comments in the next comment block still - * apply. - */ - //J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - - /* - * If we're journalling data, and this buffer was - * subject to a write(), it could be metadata, forget - * or shadow against the committing transaction. Now, - * someone has dirtied the same darn page via a mapping - * and it is being writepage()'d. - * We *could* just steal the page from commit, with some - * fancy locking there. Instead, we just skip it - - * don't tie the page's buffers to the new transaction - * at all. - * Implication: if we crash before the writepage() data - * is written into the filesystem, recovery will replay - * the write() data. - */ - if (jh->b_jlist != BJ_None && - jh->b_jlist != BJ_SyncData && - jh->b_jlist != BJ_Locked) { - JBUFFER_TRACE(jh, "Not stealing"); - goto no_journal; - } - - /* - * This buffer may be undergoing writeout in commit. We - * can't return from here and let the caller dirty it - * again because that can cause the write-out loop in - * commit to never terminate. - */ - if (buffer_dirty(bh)) { - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - need_brelse = 1; - sync_dirty_buffer(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - /* Since we dropped the lock... */ - if (!buffer_mapped(bh)) { - JBUFFER_TRACE(jh, "buffer got unmapped"); - goto no_journal; - } - /* The buffer may become locked again at any - time if it is redirtied */ - } - - /* - * We cannot remove the buffer with io error from the - * committing transaction, because otherwise it would - * miss the error and the commit would not abort. - */ - if (unlikely(!buffer_uptodate(bh))) { - ret = -EIO; - goto no_journal; - } - /* We might have slept so buffer could be refiled now */ - if (jh->b_transaction != NULL && - jh->b_transaction != handle->h_transaction) { - JBUFFER_TRACE(jh, "unfile from commit"); - __journal_temp_unlink_buffer(jh); - /* It still points to the committing - * transaction; move it to this one so - * that the refile assert checks are - * happy. */ - jh->b_transaction = handle->h_transaction; - } - /* The buffer will be refiled below */ - - } - /* - * Special case --- the buffer might actually have been - * allocated and then immediately deallocated in the previous, - * committing transaction, so might still be left on that - * transaction's metadata lists. - */ - if (jh->b_jlist != BJ_SyncData && jh->b_jlist != BJ_Locked) { - JBUFFER_TRACE(jh, "not on correct data list: unfile"); - J_ASSERT_JH(jh, jh->b_jlist != BJ_Shadow); - JBUFFER_TRACE(jh, "file as data"); - __journal_file_buffer(jh, handle->h_transaction, - BJ_SyncData); - } - } else { - JBUFFER_TRACE(jh, "not on a transaction"); - __journal_file_buffer(jh, handle->h_transaction, BJ_SyncData); - } -no_journal: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - if (need_brelse) { - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - } - JBUFFER_TRACE(jh, "exit"); - journal_put_journal_head(jh); - return ret; -} - -/** - * int journal_dirty_metadata() - mark a buffer as containing dirty metadata - * @handle: transaction to add buffer to. - * @bh: buffer to mark - * - * Mark dirty metadata which needs to be journaled as part of the current - * transaction. - * - * The buffer is placed on the transaction's metadata list and is marked - * as belonging to the transaction. - * - * Returns error number or 0 on success. - * - * Special care needs to be taken if the buffer already belongs to the - * current committing transaction (in which case we should have frozen - * data present for that commit). In that case, we don't relink the - * buffer: that only gets done when the old transaction finally - * completes its commit. - */ -int journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh = bh2jh(bh); - - jbd_debug(5, "journal_head %p\n", jh); - JBUFFER_TRACE(jh, "entry"); - if (is_handle_aborted(handle)) - goto out; - - jbd_lock_bh_state(bh); - - if (jh->b_modified == 0) { - /* - * This buffer's got modified and becoming part - * of the transaction. This needs to be done - * once a transaction -bzzz - */ - jh->b_modified = 1; - J_ASSERT_JH(jh, handle->h_buffer_credits > 0); - handle->h_buffer_credits--; - } - - /* - * fastpath, to avoid expensive locking. If this buffer is already - * on the running transaction's metadata list there is nothing to do. - * Nobody can take it off again because there is a handle open. - * I _think_ we're OK here with SMP barriers - a mistaken decision will - * result in this test being false, so we go in and take the locks. - */ - if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) { - JBUFFER_TRACE(jh, "fastpath"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_running_transaction); - goto out_unlock_bh; - } - - set_buffer_jbddirty(bh); - - /* - * Metadata already on the current transaction list doesn't - * need to be filed. Metadata on another transaction's list must - * be committing, and will be refiled once the commit completes: - * leave it alone for now. - */ - if (jh->b_transaction != transaction) { - JBUFFER_TRACE(jh, "already on other transaction"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - J_ASSERT_JH(jh, jh->b_next_transaction == transaction); - /* And this case is illegal: we can't reuse another - * transaction's data buffer, ever. */ - goto out_unlock_bh; - } - - /* That test should have eliminated the following case: */ - J_ASSERT_JH(jh, jh->b_frozen_data == NULL); - - JBUFFER_TRACE(jh, "file as BJ_Metadata"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh, handle->h_transaction, BJ_Metadata); - spin_unlock(&journal->j_list_lock); -out_unlock_bh: - jbd_unlock_bh_state(bh); -out: - JBUFFER_TRACE(jh, "exit"); - return 0; -} - -/* - * journal_release_buffer: undo a get_write_access without any buffer - * updates, if the update decided in the end that it didn't need access. - * - */ -void -journal_release_buffer(handle_t *handle, struct buffer_head *bh) -{ - BUFFER_TRACE(bh, "entry"); -} - -/** - * void journal_forget() - bforget() for potentially-journaled buffers. - * @handle: transaction handle - * @bh: bh to 'forget' - * - * We can only do the bforget if there are no commits pending against the - * buffer. If the buffer is dirty in the current running transaction we - * can safely unlink it. - * - * bh may not be a journalled buffer at all - it may be a non-JBD - * buffer which came off the hashtable. Check for this. - * - * Decrements bh->b_count by one. - * - * Allow this call even if the handle has aborted --- it may be part of - * the caller's cleanup after an abort. - */ -int journal_forget (handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh; - int drop_reserve = 0; - int err = 0; - int was_modified = 0; - - BUFFER_TRACE(bh, "entry"); - - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - if (!buffer_jbd(bh)) - goto not_jbd; - jh = bh2jh(bh); - - /* Critical error: attempting to delete a bitmap buffer, maybe? - * Don't do any jbd operations, and return an error. */ - if (!J_EXPECT_JH(jh, !jh->b_committed_data, - "inconsistent data on disk")) { - err = -EIO; - goto not_jbd; - } - - /* keep track of whether or not this transaction modified us */ - was_modified = jh->b_modified; - - /* - * The buffer's going from the transaction, we must drop - * all references -bzzz - */ - jh->b_modified = 0; - - if (jh->b_transaction == handle->h_transaction) { - J_ASSERT_JH(jh, !jh->b_frozen_data); - - /* If we are forgetting a buffer which is already part - * of this transaction, then we can just drop it from - * the transaction immediately. */ - clear_buffer_dirty(bh); - clear_buffer_jbddirty(bh); - - JBUFFER_TRACE(jh, "belongs to current transaction: unfile"); - - /* - * we only want to drop a reference if this transaction - * modified the buffer - */ - if (was_modified) - drop_reserve = 1; - - /* - * We are no longer going to journal this buffer. - * However, the commit of this transaction is still - * important to the buffer: the delete that we are now - * processing might obsolete an old log entry, so by - * committing, we can satisfy the buffer's checkpoint. - * - * So, if we have a checkpoint on the buffer, we should - * now refile the buffer on our BJ_Forget list so that - * we know to remove the checkpoint after we commit. - */ - - if (jh->b_cp_transaction) { - __journal_temp_unlink_buffer(jh); - __journal_file_buffer(jh, transaction, BJ_Forget); - } else { - __journal_unfile_buffer(jh); - if (!buffer_jbd(bh)) { - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __bforget(bh); - goto drop; - } - } - } else if (jh->b_transaction) { - J_ASSERT_JH(jh, (jh->b_transaction == - journal->j_committing_transaction)); - /* However, if the buffer is still owned by a prior - * (committing) transaction, we can't drop it yet... */ - JBUFFER_TRACE(jh, "belongs to older transaction"); - /* ... but we CAN drop it from the new transaction if we - * have also modified it since the original commit. */ - - if (jh->b_next_transaction) { - J_ASSERT(jh->b_next_transaction == transaction); - jh->b_next_transaction = NULL; - - /* - * only drop a reference if this transaction modified - * the buffer - */ - if (was_modified) - drop_reserve = 1; - } - } - -not_jbd: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); -drop: - if (drop_reserve) { - /* no need to reserve log space for this block -bzzz */ - handle->h_buffer_credits++; - } - return err; -} - -/** - * int journal_stop() - complete a transaction - * @handle: tranaction to complete. - * - * All done for a particular handle. - * - * There is not much action needed here. We just return any remaining - * buffer credits to the transaction and remove the handle. The only - * complication is that we need to start a commit operation if the - * filesystem is marked for synchronous update. - * - * journal_stop itself will not usually return an error, but it may - * do so in unusual circumstances. In particular, expect it to - * return -EIO if a journal_abort has been executed since the - * transaction began. - */ -int journal_stop(handle_t *handle) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int err; - pid_t pid; - - J_ASSERT(journal_current_handle() == handle); - - if (is_handle_aborted(handle)) - err = -EIO; - else { - J_ASSERT(transaction->t_updates > 0); - err = 0; - } - - if (--handle->h_ref > 0) { - jbd_debug(4, "h_ref %d -> %d\n", handle->h_ref + 1, - handle->h_ref); - return err; - } - - jbd_debug(4, "Handle %p going down\n", handle); - - /* - * Implement synchronous transaction batching. If the handle - * was synchronous, don't force a commit immediately. Let's - * yield and let another thread piggyback onto this transaction. - * Keep doing that while new threads continue to arrive. - * It doesn't cost much - we're about to run a commit and sleep - * on IO anyway. Speeds up many-threaded, many-dir operations - * by 30x or more... - * - * We try and optimize the sleep time against what the underlying disk - * can do, instead of having a static sleep time. This is useful for - * the case where our storage is so fast that it is more optimal to go - * ahead and force a flush and wait for the transaction to be committed - * than it is to wait for an arbitrary amount of time for new writers to - * join the transaction. We achieve this by measuring how long it takes - * to commit a transaction, and compare it with how long this - * transaction has been running, and if run time < commit time then we - * sleep for the delta and commit. This greatly helps super fast disks - * that would see slowdowns as more threads started doing fsyncs. - * - * But don't do this if this process was the most recent one to - * perform a synchronous write. We do this to detect the case where a - * single process is doing a stream of sync writes. No point in waiting - * for joiners in that case. - */ - pid = current->pid; - if (handle->h_sync && journal->j_last_sync_writer != pid) { - u64 commit_time, trans_time; - - journal->j_last_sync_writer = pid; - - spin_lock(&journal->j_state_lock); - commit_time = journal->j_average_commit_time; - spin_unlock(&journal->j_state_lock); - - trans_time = ktime_to_ns(ktime_sub(ktime_get(), - transaction->t_start_time)); - - commit_time = min_t(u64, commit_time, - 1000*jiffies_to_usecs(1)); - - if (trans_time < commit_time) { - ktime_t expires = ktime_add_ns(ktime_get(), - commit_time); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_hrtimeout(&expires, HRTIMER_MODE_ABS); - } - } - - current->journal_info = NULL; - spin_lock(&journal->j_state_lock); - spin_lock(&transaction->t_handle_lock); - transaction->t_outstanding_credits -= handle->h_buffer_credits; - transaction->t_updates--; - if (!transaction->t_updates) { - wake_up(&journal->j_wait_updates); - if (journal->j_barrier_count) - wake_up(&journal->j_wait_transaction_locked); - } - - /* - * If the handle is marked SYNC, we need to set another commit - * going! We also want to force a commit if the current - * transaction is occupying too much of the log, or if the - * transaction is too old now. - */ - if (handle->h_sync || - transaction->t_outstanding_credits > - journal->j_max_transaction_buffers || - time_after_eq(jiffies, transaction->t_expires)) { - /* Do this even for aborted journals: an abort still - * completes the commit thread, it just doesn't write - * anything to disk. */ - tid_t tid = transaction->t_tid; - - spin_unlock(&transaction->t_handle_lock); - jbd_debug(2, "transaction too old, requesting commit for " - "handle %p\n", handle); - /* This is non-blocking */ - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - - /* - * Special case: JFS_SYNC synchronous updates require us - * to wait for the commit to complete. - */ - if (handle->h_sync && !(current->flags & PF_MEMALLOC)) - err = log_wait_commit(journal, tid); - } else { - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - } - - lock_map_release(&handle->h_lockdep_map); - - jbd_free_handle(handle); - return err; -} - -/** - * int journal_force_commit() - force any uncommitted transactions - * @journal: journal to force - * - * For synchronous operations: force any uncommitted transactions - * to disk. May seem kludgy, but it reuses all the handle batching - * code in a very simple manner. - */ -int journal_force_commit(journal_t *journal) -{ - handle_t *handle; - int ret; - - handle = journal_start(journal, 1); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - } else { - handle->h_sync = 1; - ret = journal_stop(handle); - } - return ret; -} - -/* - * - * List management code snippets: various functions for manipulating the - * transaction buffer lists. - * - */ - -/* - * Append a buffer to a transaction list, given the transaction's list head - * pointer. - * - * j_list_lock is held. - * - * jbd_lock_bh_state(jh2bh(jh)) is held. - */ - -static inline void -__blist_add_buffer(struct journal_head **list, struct journal_head *jh) -{ - if (!*list) { - jh->b_tnext = jh->b_tprev = jh; - *list = jh; - } else { - /* Insert at the tail of the list to preserve order */ - struct journal_head *first = *list, *last = first->b_tprev; - jh->b_tprev = last; - jh->b_tnext = first; - last->b_tnext = first->b_tprev = jh; - } -} - -/* - * Remove a buffer from a transaction list, given the transaction's list - * head pointer. - * - * Called with j_list_lock held, and the journal may not be locked. - * - * jbd_lock_bh_state(jh2bh(jh)) is held. - */ - -static inline void -__blist_del_buffer(struct journal_head **list, struct journal_head *jh) -{ - if (*list == jh) { - *list = jh->b_tnext; - if (*list == jh) - *list = NULL; - } - jh->b_tprev->b_tnext = jh->b_tnext; - jh->b_tnext->b_tprev = jh->b_tprev; -} - -/* - * Remove a buffer from the appropriate transaction list. - * - * Note that this function can *change* the value of - * bh->b_transaction->t_sync_datalist, t_buffers, t_forget, - * t_iobuf_list, t_shadow_list, t_log_list or t_reserved_list. If the caller - * is holding onto a copy of one of thee pointers, it could go bad. - * Generally the caller needs to re-read the pointer from the transaction_t. - * - * Called under j_list_lock. The journal may not be locked. - */ -static void __journal_temp_unlink_buffer(struct journal_head *jh) -{ - struct journal_head **list = NULL; - transaction_t *transaction; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - transaction = jh->b_transaction; - if (transaction) - assert_spin_locked(&transaction->t_journal->j_list_lock); - - J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); - if (jh->b_jlist != BJ_None) - J_ASSERT_JH(jh, transaction != NULL); - - switch (jh->b_jlist) { - case BJ_None: - return; - case BJ_SyncData: - list = &transaction->t_sync_datalist; - break; - case BJ_Metadata: - transaction->t_nr_buffers--; - J_ASSERT_JH(jh, transaction->t_nr_buffers >= 0); - list = &transaction->t_buffers; - break; - case BJ_Forget: - list = &transaction->t_forget; - break; - case BJ_IO: - list = &transaction->t_iobuf_list; - break; - case BJ_Shadow: - list = &transaction->t_shadow_list; - break; - case BJ_LogCtl: - list = &transaction->t_log_list; - break; - case BJ_Reserved: - list = &transaction->t_reserved_list; - break; - case BJ_Locked: - list = &transaction->t_locked_list; - break; - } - - __blist_del_buffer(list, jh); - jh->b_jlist = BJ_None; - if (test_clear_buffer_jbddirty(bh)) - mark_buffer_dirty(bh); /* Expose it to the VM */ -} - -/* - * Remove buffer from all transactions. - * - * Called with bh_state lock and j_list_lock - * - * jh and bh may be already freed when this function returns. - */ -void __journal_unfile_buffer(struct journal_head *jh) -{ - __journal_temp_unlink_buffer(jh); - jh->b_transaction = NULL; - journal_put_journal_head(jh); -} - -void journal_unfile_buffer(journal_t *journal, struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - /* Get reference so that buffer cannot be freed before we unlock it */ - get_bh(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - __journal_unfile_buffer(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); -} - -/* - * Called from journal_try_to_free_buffers(). - * - * Called under jbd_lock_bh_state(bh) - */ -static void -__journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh) -{ - struct journal_head *jh; - - jh = bh2jh(bh); - - if (buffer_locked(bh) || buffer_dirty(bh)) - goto out; - - if (jh->b_next_transaction != NULL) - goto out; - - spin_lock(&journal->j_list_lock); - if (jh->b_transaction != NULL && jh->b_cp_transaction == NULL) { - if (jh->b_jlist == BJ_SyncData || jh->b_jlist == BJ_Locked) { - /* A written-back ordered data buffer */ - JBUFFER_TRACE(jh, "release data"); - __journal_unfile_buffer(jh); - } - } else if (jh->b_cp_transaction != NULL && jh->b_transaction == NULL) { - /* written-back checkpointed metadata buffer */ - if (jh->b_jlist == BJ_None) { - JBUFFER_TRACE(jh, "remove from checkpoint list"); - __journal_remove_checkpoint(jh); - } - } - spin_unlock(&journal->j_list_lock); -out: - return; -} - -/** - * int journal_try_to_free_buffers() - try to free page buffers. - * @journal: journal for operation - * @page: to try and free - * @gfp_mask: we use the mask to detect how hard should we try to release - * buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to - * release the buffers. - * - * - * For all the buffers on this page, - * if they are fully written out ordered data, move them onto BUF_CLEAN - * so try_to_free_buffers() can reap them. - * - * This function returns non-zero if we wish try_to_free_buffers() - * to be called. We do this if the page is releasable by try_to_free_buffers(). - * We also do it if the page has locked or dirty buffers and the caller wants - * us to perform sync or async writeout. - * - * This complicates JBD locking somewhat. We aren't protected by the - * BKL here. We wish to remove the buffer from its committing or - * running transaction's ->t_datalist via __journal_unfile_buffer. - * - * This may *change* the value of transaction_t->t_datalist, so anyone - * who looks at t_datalist needs to lock against this function. - * - * Even worse, someone may be doing a journal_dirty_data on this - * buffer. So we need to lock against that. journal_dirty_data() - * will come out of the lock with the buffer dirty, which makes it - * ineligible for release here. - * - * Who else is affected by this? hmm... Really the only contender - * is do_get_write_access() - it could be looking at the buffer while - * journal_try_to_free_buffer() is changing its state. But that - * cannot happen because we never reallocate freed data as metadata - * while the data is part of a transaction. Yes? - * - * Return 0 on failure, 1 on success - */ -int journal_try_to_free_buffers(journal_t *journal, - struct page *page, gfp_t gfp_mask) -{ - struct buffer_head *head; - struct buffer_head *bh; - int ret = 0; - - J_ASSERT(PageLocked(page)); - - head = page_buffers(page); - bh = head; - do { - struct journal_head *jh; - - /* - * We take our own ref against the journal_head here to avoid - * having to add tons of locking around each instance of - * journal_put_journal_head(). - */ - jh = journal_grab_journal_head(bh); - if (!jh) - continue; - - jbd_lock_bh_state(bh); - __journal_try_to_free_buffer(journal, bh); - journal_put_journal_head(jh); - jbd_unlock_bh_state(bh); - if (buffer_jbd(bh)) - goto busy; - } while ((bh = bh->b_this_page) != head); - - ret = try_to_free_buffers(page); - -busy: - return ret; -} - -/* - * This buffer is no longer needed. If it is on an older transaction's - * checkpoint list we need to record it on this transaction's forget list - * to pin this buffer (and hence its checkpointing transaction) down until - * this transaction commits. If the buffer isn't on a checkpoint list, we - * release it. - * Returns non-zero if JBD no longer has an interest in the buffer. - * - * Called under j_list_lock. - * - * Called under jbd_lock_bh_state(bh). - */ -static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) -{ - int may_free = 1; - struct buffer_head *bh = jh2bh(jh); - - if (jh->b_cp_transaction) { - JBUFFER_TRACE(jh, "on running+cp transaction"); - __journal_temp_unlink_buffer(jh); - /* - * We don't want to write the buffer anymore, clear the - * bit so that we don't confuse checks in - * __journal_file_buffer - */ - clear_buffer_dirty(bh); - __journal_file_buffer(jh, transaction, BJ_Forget); - may_free = 0; - } else { - JBUFFER_TRACE(jh, "on running transaction"); - __journal_unfile_buffer(jh); - } - return may_free; -} - -/* - * journal_invalidatepage - * - * This code is tricky. It has a number of cases to deal with. - * - * There are two invariants which this code relies on: - * - * i_size must be updated on disk before we start calling invalidatepage on the - * data. - * - * This is done in ext3 by defining an ext3_setattr method which - * updates i_size before truncate gets going. By maintaining this - * invariant, we can be sure that it is safe to throw away any buffers - * attached to the current transaction: once the transaction commits, - * we know that the data will not be needed. - * - * Note however that we can *not* throw away data belonging to the - * previous, committing transaction! - * - * Any disk blocks which *are* part of the previous, committing - * transaction (and which therefore cannot be discarded immediately) are - * not going to be reused in the new running transaction - * - * The bitmap committed_data images guarantee this: any block which is - * allocated in one transaction and removed in the next will be marked - * as in-use in the committed_data bitmap, so cannot be reused until - * the next transaction to delete the block commits. This means that - * leaving committing buffers dirty is quite safe: the disk blocks - * cannot be reallocated to a different file and so buffer aliasing is - * not possible. - * - * - * The above applies mainly to ordered data mode. In writeback mode we - * don't make guarantees about the order in which data hits disk --- in - * particular we don't guarantee that new dirty data is flushed before - * transaction commit --- so it is always safe just to discard data - * immediately in that mode. --sct - */ - -/* - * The journal_unmap_buffer helper function returns zero if the buffer - * concerned remains pinned as an anonymous buffer belonging to an older - * transaction. - * - * We're outside-transaction here. Either or both of j_running_transaction - * and j_committing_transaction may be NULL. - */ -static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh, - int partial_page) -{ - transaction_t *transaction; - struct journal_head *jh; - int may_free = 1; - - BUFFER_TRACE(bh, "entry"); - -retry: - /* - * It is safe to proceed here without the j_list_lock because the - * buffers cannot be stolen by try_to_free_buffers as long as we are - * holding the page lock. --sct - */ - - if (!buffer_jbd(bh)) - goto zap_buffer_unlocked; - - spin_lock(&journal->j_state_lock); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - jh = journal_grab_journal_head(bh); - if (!jh) - goto zap_buffer_no_jh; - - /* - * We cannot remove the buffer from checkpoint lists until the - * transaction adding inode to orphan list (let's call it T) - * is committed. Otherwise if the transaction changing the - * buffer would be cleaned from the journal before T is - * committed, a crash will cause that the correct contents of - * the buffer will be lost. On the other hand we have to - * clear the buffer dirty bit at latest at the moment when the - * transaction marking the buffer as freed in the filesystem - * structures is committed because from that moment on the - * block can be reallocated and used by a different page. - * Since the block hasn't been freed yet but the inode has - * already been added to orphan list, it is safe for us to add - * the buffer to BJ_Forget list of the newest transaction. - * - * Also we have to clear buffer_mapped flag of a truncated buffer - * because the buffer_head may be attached to the page straddling - * i_size (can happen only when blocksize < pagesize) and thus the - * buffer_head can be reused when the file is extended again. So we end - * up keeping around invalidated buffers attached to transactions' - * BJ_Forget list just to stop checkpointing code from cleaning up - * the transaction this buffer was modified in. - */ - transaction = jh->b_transaction; - if (transaction == NULL) { - /* First case: not on any transaction. If it - * has no checkpoint link, then we can zap it: - * it's a writeback-mode buffer so we don't care - * if it hits disk safely. */ - if (!jh->b_cp_transaction) { - JBUFFER_TRACE(jh, "not on any transaction: zap"); - goto zap_buffer; - } - - if (!buffer_dirty(bh)) { - /* bdflush has written it. We can drop it now */ - goto zap_buffer; - } - - /* OK, it must be in the journal but still not - * written fully to disk: it's metadata or - * journaled data... */ - - if (journal->j_running_transaction) { - /* ... and once the current transaction has - * committed, the buffer won't be needed any - * longer. */ - JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget"); - may_free = __dispose_buffer(jh, - journal->j_running_transaction); - goto zap_buffer; - } else { - /* There is no currently-running transaction. So the - * orphan record which we wrote for this file must have - * passed into commit. We must attach this buffer to - * the committing transaction, if it exists. */ - if (journal->j_committing_transaction) { - JBUFFER_TRACE(jh, "give to committing trans"); - may_free = __dispose_buffer(jh, - journal->j_committing_transaction); - goto zap_buffer; - } else { - /* The orphan record's transaction has - * committed. We can cleanse this buffer */ - clear_buffer_jbddirty(bh); - goto zap_buffer; - } - } - } else if (transaction == journal->j_committing_transaction) { - JBUFFER_TRACE(jh, "on committing transaction"); - if (jh->b_jlist == BJ_Locked) { - /* - * The buffer is on the committing transaction's locked - * list. We have the buffer locked, so I/O has - * completed. So we can nail the buffer now. - */ - may_free = __dispose_buffer(jh, transaction); - goto zap_buffer; - } - /* - * The buffer is committing, we simply cannot touch - * it. If the page is straddling i_size we have to wait - * for commit and try again. - */ - if (partial_page) { - tid_t tid = journal->j_committing_transaction->t_tid; - - journal_put_journal_head(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); - unlock_buffer(bh); - log_wait_commit(journal, tid); - lock_buffer(bh); - goto retry; - } - /* - * OK, buffer won't be reachable after truncate. We just set - * j_next_transaction to the running transaction (if there is - * one) and mark buffer as freed so that commit code knows it - * should clear dirty bits when it is done with the buffer. - */ - set_buffer_freed(bh); - if (journal->j_running_transaction && buffer_jbddirty(bh)) - jh->b_next_transaction = journal->j_running_transaction; - journal_put_journal_head(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); - return 0; - } else { - /* Good, the buffer belongs to the running transaction. - * We are writing our own transaction's data, not any - * previous one's, so it is safe to throw it away - * (remember that we expect the filesystem to have set - * i_size already for this truncate so recovery will not - * expose the disk blocks we are discarding here.) */ - J_ASSERT_JH(jh, transaction == journal->j_running_transaction); - JBUFFER_TRACE(jh, "on running transaction"); - may_free = __dispose_buffer(jh, transaction); - } - -zap_buffer: - /* - * This is tricky. Although the buffer is truncated, it may be reused - * if blocksize < pagesize and it is attached to the page straddling - * EOF. Since the buffer might have been added to BJ_Forget list of the - * running transaction, journal_get_write_access() won't clear - * b_modified and credit accounting gets confused. So clear b_modified - * here. */ - jh->b_modified = 0; - journal_put_journal_head(jh); -zap_buffer_no_jh: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); -zap_buffer_unlocked: - clear_buffer_dirty(bh); - J_ASSERT_BH(bh, !buffer_jbddirty(bh)); - clear_buffer_mapped(bh); - clear_buffer_req(bh); - clear_buffer_new(bh); - bh->b_bdev = NULL; - return may_free; -} - -/** - * void journal_invalidatepage() - invalidate a journal page - * @journal: journal to use for flush - * @page: page to flush - * @offset: offset of the range to invalidate - * @length: length of the range to invalidate - * - * Reap page buffers containing data in specified range in page. - */ -void journal_invalidatepage(journal_t *journal, - struct page *page, - unsigned int offset, - unsigned int length) -{ - struct buffer_head *head, *bh, *next; - unsigned int stop = offset + length; - unsigned int curr_off = 0; - int partial_page = (offset || length < PAGE_CACHE_SIZE); - int may_free = 1; - - if (!PageLocked(page)) - BUG(); - if (!page_has_buffers(page)) - return; - - BUG_ON(stop > PAGE_CACHE_SIZE || stop < length); - - /* We will potentially be playing with lists other than just the - * data lists (especially for journaled data mode), so be - * cautious in our locking. */ - - head = bh = page_buffers(page); - do { - unsigned int next_off = curr_off + bh->b_size; - next = bh->b_this_page; - - if (next_off > stop) - return; - - if (offset <= curr_off) { - /* This block is wholly outside the truncation point */ - lock_buffer(bh); - may_free &= journal_unmap_buffer(journal, bh, - partial_page); - unlock_buffer(bh); - } - curr_off = next_off; - bh = next; - - } while (bh != head); - - if (!partial_page) { - if (may_free && try_to_free_buffers(page)) - J_ASSERT(!page_has_buffers(page)); - } -} - -/* - * File a buffer on the given transaction list. - */ -void __journal_file_buffer(struct journal_head *jh, - transaction_t *transaction, int jlist) -{ - struct journal_head **list = NULL; - int was_dirty = 0; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - assert_spin_locked(&transaction->t_journal->j_list_lock); - - J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); - J_ASSERT_JH(jh, jh->b_transaction == transaction || - jh->b_transaction == NULL); - - if (jh->b_transaction && jh->b_jlist == jlist) - return; - - if (jlist == BJ_Metadata || jlist == BJ_Reserved || - jlist == BJ_Shadow || jlist == BJ_Forget) { - /* - * For metadata buffers, we track dirty bit in buffer_jbddirty - * instead of buffer_dirty. We should not see a dirty bit set - * here because we clear it in do_get_write_access but e.g. - * tune2fs can modify the sb and set the dirty bit at any time - * so we try to gracefully handle that. - */ - if (buffer_dirty(bh)) - warn_dirty_buffer(bh); - if (test_clear_buffer_dirty(bh) || - test_clear_buffer_jbddirty(bh)) - was_dirty = 1; - } - - if (jh->b_transaction) - __journal_temp_unlink_buffer(jh); - else - journal_grab_journal_head(bh); - jh->b_transaction = transaction; - - switch (jlist) { - case BJ_None: - J_ASSERT_JH(jh, !jh->b_committed_data); - J_ASSERT_JH(jh, !jh->b_frozen_data); - return; - case BJ_SyncData: - list = &transaction->t_sync_datalist; - break; - case BJ_Metadata: - transaction->t_nr_buffers++; - list = &transaction->t_buffers; - break; - case BJ_Forget: - list = &transaction->t_forget; - break; - case BJ_IO: - list = &transaction->t_iobuf_list; - break; - case BJ_Shadow: - list = &transaction->t_shadow_list; - break; - case BJ_LogCtl: - list = &transaction->t_log_list; - break; - case BJ_Reserved: - list = &transaction->t_reserved_list; - break; - case BJ_Locked: - list = &transaction->t_locked_list; - break; - } - - __blist_add_buffer(list, jh); - jh->b_jlist = jlist; - - if (was_dirty) - set_buffer_jbddirty(bh); -} - -void journal_file_buffer(struct journal_head *jh, - transaction_t *transaction, int jlist) -{ - jbd_lock_bh_state(jh2bh(jh)); - spin_lock(&transaction->t_journal->j_list_lock); - __journal_file_buffer(jh, transaction, jlist); - spin_unlock(&transaction->t_journal->j_list_lock); - jbd_unlock_bh_state(jh2bh(jh)); -} - -/* - * Remove a buffer from its current buffer list in preparation for - * dropping it from its current transaction entirely. If the buffer has - * already started to be used by a subsequent transaction, refile the - * buffer on that transaction's metadata list. - * - * Called under j_list_lock - * Called under jbd_lock_bh_state(jh2bh(jh)) - * - * jh and bh may be already free when this function returns - */ -void __journal_refile_buffer(struct journal_head *jh) -{ - int was_dirty, jlist; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - if (jh->b_transaction) - assert_spin_locked(&jh->b_transaction->t_journal->j_list_lock); - - /* If the buffer is now unused, just drop it. */ - if (jh->b_next_transaction == NULL) { - __journal_unfile_buffer(jh); - return; - } - - /* - * It has been modified by a later transaction: add it to the new - * transaction's metadata list. - */ - - was_dirty = test_clear_buffer_jbddirty(bh); - __journal_temp_unlink_buffer(jh); - /* - * We set b_transaction here because b_next_transaction will inherit - * our jh reference and thus __journal_file_buffer() must not take a - * new one. - */ - jh->b_transaction = jh->b_next_transaction; - jh->b_next_transaction = NULL; - if (buffer_freed(bh)) - jlist = BJ_Forget; - else if (jh->b_modified) - jlist = BJ_Metadata; - else - jlist = BJ_Reserved; - __journal_file_buffer(jh, jh->b_transaction, jlist); - J_ASSERT_JH(jh, jh->b_transaction->t_state == T_RUNNING); - - if (was_dirty) - set_buffer_jbddirty(bh); -} - -/* - * __journal_refile_buffer() with necessary locking added. We take our bh - * reference so that we can safely unlock bh. - * - * The jh and bh may be freed by this call. - */ -void journal_refile_buffer(journal_t *journal, struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - /* Get reference so that buffer cannot be freed before we unlock it */ - get_bh(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - __journal_refile_buffer(jh); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_list_lock); - __brelse(bh); -} -- cgit 1.2.3-korg