From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/video/fbdev/pxafb.c | 2331 ++++++++++++++++++++++++++++++++++++ 1 file changed, 2331 insertions(+) create mode 100644 kernel/drivers/video/fbdev/pxafb.c (limited to 'kernel/drivers/video/fbdev/pxafb.c') diff --git a/kernel/drivers/video/fbdev/pxafb.c b/kernel/drivers/video/fbdev/pxafb.c new file mode 100644 index 000000000..7245611ec --- /dev/null +++ b/kernel/drivers/video/fbdev/pxafb.c @@ -0,0 +1,2331 @@ +/* + * linux/drivers/video/pxafb.c + * + * Copyright (C) 1999 Eric A. Thomas. + * Copyright (C) 2004 Jean-Frederic Clere. + * Copyright (C) 2004 Ian Campbell. + * Copyright (C) 2004 Jeff Lackey. + * Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas + * which in turn is + * Based on acornfb.c Copyright (C) Russell King. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Intel PXA250/210 LCD Controller Frame Buffer Driver + * + * Please direct your questions and comments on this driver to the following + * email address: + * + * linux-arm-kernel@lists.arm.linux.org.uk + * + * Add support for overlay1 and overlay2 based on pxafb_overlay.c: + * + * Copyright (C) 2004, Intel Corporation + * + * 2003/08/27: + * 2004/03/10: + * 2004/10/28: + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * All Rights Reserved + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * Complain if VAR is out of range. + */ +#define DEBUG_VAR 1 + +#include "pxafb.h" + +/* Bits which should not be set in machine configuration structures */ +#define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM | LCCR0_BM | LCCR0_QDM |\ + LCCR0_DIS | LCCR0_EFM | LCCR0_IUM |\ + LCCR0_SFM | LCCR0_LDM | LCCR0_ENB) + +#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\ + LCCR3_PCD | LCCR3_BPP(0xf)) + +static int pxafb_activate_var(struct fb_var_screeninfo *var, + struct pxafb_info *); +static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); +static void setup_base_frame(struct pxafb_info *fbi, + struct fb_var_screeninfo *var, int branch); +static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, + unsigned long offset, size_t size); + +static unsigned long video_mem_size = 0; + +static inline unsigned long +lcd_readl(struct pxafb_info *fbi, unsigned int off) +{ + return __raw_readl(fbi->mmio_base + off); +} + +static inline void +lcd_writel(struct pxafb_info *fbi, unsigned int off, unsigned long val) +{ + __raw_writel(val, fbi->mmio_base + off); +} + +static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state) +{ + unsigned long flags; + + local_irq_save(flags); + /* + * We need to handle two requests being made at the same time. + * There are two important cases: + * 1. When we are changing VT (C_REENABLE) while unblanking + * (C_ENABLE) We must perform the unblanking, which will + * do our REENABLE for us. + * 2. When we are blanking, but immediately unblank before + * we have blanked. We do the "REENABLE" thing here as + * well, just to be sure. + */ + if (fbi->task_state == C_ENABLE && state == C_REENABLE) + state = (u_int) -1; + if (fbi->task_state == C_DISABLE && state == C_ENABLE) + state = C_REENABLE; + + if (state != (u_int)-1) { + fbi->task_state = state; + schedule_work(&fbi->task); + } + local_irq_restore(flags); +} + +static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int +pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, + u_int trans, struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + u_int val; + + if (regno >= fbi->palette_size) + return 1; + + if (fbi->fb.var.grayscale) { + fbi->palette_cpu[regno] = ((blue >> 8) & 0x00ff); + return 0; + } + + switch (fbi->lccr4 & LCCR4_PAL_FOR_MASK) { + case LCCR4_PAL_FOR_0: + val = ((red >> 0) & 0xf800); + val |= ((green >> 5) & 0x07e0); + val |= ((blue >> 11) & 0x001f); + fbi->palette_cpu[regno] = val; + break; + case LCCR4_PAL_FOR_1: + val = ((red << 8) & 0x00f80000); + val |= ((green >> 0) & 0x0000fc00); + val |= ((blue >> 8) & 0x000000f8); + ((u32 *)(fbi->palette_cpu))[regno] = val; + break; + case LCCR4_PAL_FOR_2: + val = ((red << 8) & 0x00fc0000); + val |= ((green >> 0) & 0x0000fc00); + val |= ((blue >> 8) & 0x000000fc); + ((u32 *)(fbi->palette_cpu))[regno] = val; + break; + case LCCR4_PAL_FOR_3: + val = ((red << 8) & 0x00ff0000); + val |= ((green >> 0) & 0x0000ff00); + val |= ((blue >> 8) & 0x000000ff); + ((u32 *)(fbi->palette_cpu))[regno] = val; + break; + } + + return 0; +} + +static int +pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int trans, struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + unsigned int val; + int ret = 1; + + /* + * If inverse mode was selected, invert all the colours + * rather than the register number. The register number + * is what you poke into the framebuffer to produce the + * colour you requested. + */ + if (fbi->cmap_inverse) { + red = 0xffff - red; + green = 0xffff - green; + blue = 0xffff - blue; + } + + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (fbi->fb.var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + + switch (fbi->fb.fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = fbi->fb.pseudo_palette; + + val = chan_to_field(red, &fbi->fb.var.red); + val |= chan_to_field(green, &fbi->fb.var.green); + val |= chan_to_field(blue, &fbi->fb.var.blue); + + pal[regno] = val; + ret = 0; + } + break; + + case FB_VISUAL_STATIC_PSEUDOCOLOR: + case FB_VISUAL_PSEUDOCOLOR: + ret = pxafb_setpalettereg(regno, red, green, blue, trans, info); + break; + } + + return ret; +} + +/* calculate pixel depth, transparency bit included, >=16bpp formats _only_ */ +static inline int var_to_depth(struct fb_var_screeninfo *var) +{ + return var->red.length + var->green.length + + var->blue.length + var->transp.length; +} + +/* calculate 4-bit BPP value for LCCR3 and OVLxC1 */ +static int pxafb_var_to_bpp(struct fb_var_screeninfo *var) +{ + int bpp = -EINVAL; + + switch (var->bits_per_pixel) { + case 1: bpp = 0; break; + case 2: bpp = 1; break; + case 4: bpp = 2; break; + case 8: bpp = 3; break; + case 16: bpp = 4; break; + case 24: + switch (var_to_depth(var)) { + case 18: bpp = 6; break; /* 18-bits/pixel packed */ + case 19: bpp = 8; break; /* 19-bits/pixel packed */ + case 24: bpp = 9; break; + } + break; + case 32: + switch (var_to_depth(var)) { + case 18: bpp = 5; break; /* 18-bits/pixel unpacked */ + case 19: bpp = 7; break; /* 19-bits/pixel unpacked */ + case 25: bpp = 10; break; + } + break; + } + return bpp; +} + +/* + * pxafb_var_to_lccr3(): + * Convert a bits per pixel value to the correct bit pattern for LCCR3 + * + * NOTE: for PXA27x with overlays support, the LCCR3_PDFOR_x bits have an + * implication of the acutal use of transparency bit, which we handle it + * here separatedly. See PXA27x Developer's Manual, Section <<7.4.6 Pixel + * Formats>> for the valid combination of PDFOR, PAL_FOR for various BPP. + * + * Transparency for palette pixel formats is not supported at the moment. + */ +static uint32_t pxafb_var_to_lccr3(struct fb_var_screeninfo *var) +{ + int bpp = pxafb_var_to_bpp(var); + uint32_t lccr3; + + if (bpp < 0) + return 0; + + lccr3 = LCCR3_BPP(bpp); + + switch (var_to_depth(var)) { + case 16: lccr3 |= var->transp.length ? LCCR3_PDFOR_3 : 0; break; + case 18: lccr3 |= LCCR3_PDFOR_3; break; + case 24: lccr3 |= var->transp.length ? LCCR3_PDFOR_2 : LCCR3_PDFOR_3; + break; + case 19: + case 25: lccr3 |= LCCR3_PDFOR_0; break; + } + return lccr3; +} + +#define SET_PIXFMT(v, r, g, b, t) \ +({ \ + (v)->transp.offset = (t) ? (r) + (g) + (b) : 0; \ + (v)->transp.length = (t) ? (t) : 0; \ + (v)->blue.length = (b); (v)->blue.offset = 0; \ + (v)->green.length = (g); (v)->green.offset = (b); \ + (v)->red.length = (r); (v)->red.offset = (b) + (g); \ +}) + +/* set the RGBT bitfields of fb_var_screeninf according to + * var->bits_per_pixel and given depth + */ +static void pxafb_set_pixfmt(struct fb_var_screeninfo *var, int depth) +{ + if (depth == 0) + depth = var->bits_per_pixel; + + if (var->bits_per_pixel < 16) { + /* indexed pixel formats */ + var->red.offset = 0; var->red.length = 8; + var->green.offset = 0; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 0; var->transp.length = 8; + } + + switch (depth) { + case 16: var->transp.length ? + SET_PIXFMT(var, 5, 5, 5, 1) : /* RGBT555 */ + SET_PIXFMT(var, 5, 6, 5, 0); break; /* RGB565 */ + case 18: SET_PIXFMT(var, 6, 6, 6, 0); break; /* RGB666 */ + case 19: SET_PIXFMT(var, 6, 6, 6, 1); break; /* RGBT666 */ + case 24: var->transp.length ? + SET_PIXFMT(var, 8, 8, 7, 1) : /* RGBT887 */ + SET_PIXFMT(var, 8, 8, 8, 0); break; /* RGB888 */ + case 25: SET_PIXFMT(var, 8, 8, 8, 1); break; /* RGBT888 */ + } +} + +#ifdef CONFIG_CPU_FREQ +/* + * pxafb_display_dma_period() + * Calculate the minimum period (in picoseconds) between two DMA + * requests for the LCD controller. If we hit this, it means we're + * doing nothing but LCD DMA. + */ +static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var) +{ + /* + * Period = pixclock * bits_per_byte * bytes_per_transfer + * / memory_bits_per_pixel; + */ + return var->pixclock * 8 * 16 / var->bits_per_pixel; +} +#endif + +/* + * Select the smallest mode that allows the desired resolution to be + * displayed. If desired parameters can be rounded up. + */ +static struct pxafb_mode_info *pxafb_getmode(struct pxafb_mach_info *mach, + struct fb_var_screeninfo *var) +{ + struct pxafb_mode_info *mode = NULL; + struct pxafb_mode_info *modelist = mach->modes; + unsigned int best_x = 0xffffffff, best_y = 0xffffffff; + unsigned int i; + + for (i = 0; i < mach->num_modes; i++) { + if (modelist[i].xres >= var->xres && + modelist[i].yres >= var->yres && + modelist[i].xres < best_x && + modelist[i].yres < best_y && + modelist[i].bpp >= var->bits_per_pixel) { + best_x = modelist[i].xres; + best_y = modelist[i].yres; + mode = &modelist[i]; + } + } + + return mode; +} + +static void pxafb_setmode(struct fb_var_screeninfo *var, + struct pxafb_mode_info *mode) +{ + var->xres = mode->xres; + var->yres = mode->yres; + var->bits_per_pixel = mode->bpp; + var->pixclock = mode->pixclock; + var->hsync_len = mode->hsync_len; + var->left_margin = mode->left_margin; + var->right_margin = mode->right_margin; + var->vsync_len = mode->vsync_len; + var->upper_margin = mode->upper_margin; + var->lower_margin = mode->lower_margin; + var->sync = mode->sync; + var->grayscale = mode->cmap_greyscale; + var->transp.length = mode->transparency; + + /* set the initial RGBA bitfields */ + pxafb_set_pixfmt(var, mode->depth); +} + +static int pxafb_adjust_timing(struct pxafb_info *fbi, + struct fb_var_screeninfo *var) +{ + int line_length; + + var->xres = max_t(int, var->xres, MIN_XRES); + var->yres = max_t(int, var->yres, MIN_YRES); + + if (!(fbi->lccr0 & LCCR0_LCDT)) { + clamp_val(var->hsync_len, 1, 64); + clamp_val(var->vsync_len, 1, 64); + clamp_val(var->left_margin, 1, 255); + clamp_val(var->right_margin, 1, 255); + clamp_val(var->upper_margin, 1, 255); + clamp_val(var->lower_margin, 1, 255); + } + + /* make sure each line is aligned on word boundary */ + line_length = var->xres * var->bits_per_pixel / 8; + line_length = ALIGN(line_length, 4); + var->xres = line_length * 8 / var->bits_per_pixel; + + /* we don't support xpan, force xres_virtual to be equal to xres */ + var->xres_virtual = var->xres; + + if (var->accel_flags & FB_ACCELF_TEXT) + var->yres_virtual = fbi->fb.fix.smem_len / line_length; + else + var->yres_virtual = max(var->yres_virtual, var->yres); + + /* check for limits */ + if (var->xres > MAX_XRES || var->yres > MAX_YRES) + return -EINVAL; + + if (var->yres > var->yres_virtual) + return -EINVAL; + + return 0; +} + +/* + * pxafb_check_var(): + * Get the video params out of 'var'. If a value doesn't fit, round it up, + * if it's too big, return -EINVAL. + * + * Round up in the following order: bits_per_pixel, xres, + * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, + * bitfields, horizontal timing, vertical timing. + */ +static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev); + int err; + + if (inf->fixed_modes) { + struct pxafb_mode_info *mode; + + mode = pxafb_getmode(inf, var); + if (!mode) + return -EINVAL; + pxafb_setmode(var, mode); + } + + /* do a test conversion to BPP fields to check the color formats */ + err = pxafb_var_to_bpp(var); + if (err < 0) + return err; + + pxafb_set_pixfmt(var, var_to_depth(var)); + + err = pxafb_adjust_timing(fbi, var); + if (err) + return err; + +#ifdef CONFIG_CPU_FREQ + pr_debug("pxafb: dma period = %d ps\n", + pxafb_display_dma_period(var)); +#endif + + return 0; +} + +/* + * pxafb_set_par(): + * Set the user defined part of the display for the specified console + */ +static int pxafb_set_par(struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + struct fb_var_screeninfo *var = &info->var; + + if (var->bits_per_pixel >= 16) + fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else if (!fbi->cmap_static) + fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + else { + /* + * Some people have weird ideas about wanting static + * pseudocolor maps. I suspect their user space + * applications are broken. + */ + fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; + } + + fbi->fb.fix.line_length = var->xres_virtual * + var->bits_per_pixel / 8; + if (var->bits_per_pixel >= 16) + fbi->palette_size = 0; + else + fbi->palette_size = var->bits_per_pixel == 1 ? + 4 : 1 << var->bits_per_pixel; + + fbi->palette_cpu = (u16 *)&fbi->dma_buff->palette[0]; + + if (fbi->fb.var.bits_per_pixel >= 16) + fb_dealloc_cmap(&fbi->fb.cmap); + else + fb_alloc_cmap(&fbi->fb.cmap, 1<fb.var.bits_per_pixel, 0); + + pxafb_activate_var(var, fbi); + + return 0; +} + +static int pxafb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + struct fb_var_screeninfo newvar; + int dma = DMA_MAX + DMA_BASE; + + if (fbi->state != C_ENABLE) + return 0; + + /* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what + * was passed in and copy the rest from the old screeninfo. + */ + memcpy(&newvar, &fbi->fb.var, sizeof(newvar)); + newvar.xoffset = var->xoffset; + newvar.yoffset = var->yoffset; + newvar.vmode &= ~FB_VMODE_YWRAP; + newvar.vmode |= var->vmode & FB_VMODE_YWRAP; + + setup_base_frame(fbi, &newvar, 1); + + if (fbi->lccr0 & LCCR0_SDS) + lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1); + + lcd_writel(fbi, FBR0, fbi->fdadr[dma] | 0x1); + return 0; +} + +/* + * pxafb_blank(): + * Blank the display by setting all palette values to zero. Note, the + * 16 bpp mode does not really use the palette, so this will not + * blank the display in all modes. + */ +static int pxafb_blank(int blank, struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + int i; + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || + fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) + for (i = 0; i < fbi->palette_size; i++) + pxafb_setpalettereg(i, 0, 0, 0, 0, info); + + pxafb_schedule_work(fbi, C_DISABLE); + /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ + break; + + case FB_BLANK_UNBLANK: + /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ + if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || + fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) + fb_set_cmap(&fbi->fb.cmap, info); + pxafb_schedule_work(fbi, C_ENABLE); + } + return 0; +} + +static struct fb_ops pxafb_ops = { + .owner = THIS_MODULE, + .fb_check_var = pxafb_check_var, + .fb_set_par = pxafb_set_par, + .fb_pan_display = pxafb_pan_display, + .fb_setcolreg = pxafb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = pxafb_blank, +}; + +#ifdef CONFIG_FB_PXA_OVERLAY +static void overlay1fb_setup(struct pxafb_layer *ofb) +{ + int size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual; + unsigned long start = ofb->video_mem_phys; + setup_frame_dma(ofb->fbi, DMA_OV1, PAL_NONE, start, size); +} + +/* Depending on the enable status of overlay1/2, the DMA should be + * updated from FDADRx (when disabled) or FBRx (when enabled). + */ +static void overlay1fb_enable(struct pxafb_layer *ofb) +{ + int enabled = lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN; + uint32_t fdadr1 = ofb->fbi->fdadr[DMA_OV1] | (enabled ? 0x1 : 0); + + lcd_writel(ofb->fbi, enabled ? FBR1 : FDADR1, fdadr1); + lcd_writel(ofb->fbi, OVL1C2, ofb->control[1]); + lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] | OVLxC1_OEN); +} + +static void overlay1fb_disable(struct pxafb_layer *ofb) +{ + uint32_t lccr5; + + if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN)) + return; + + lccr5 = lcd_readl(ofb->fbi, LCCR5); + + lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN); + + lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(1)); + lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(1)); + lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3); + + if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0) + pr_warning("%s: timeout disabling overlay1\n", __func__); + + lcd_writel(ofb->fbi, LCCR5, lccr5); +} + +static void overlay2fb_setup(struct pxafb_layer *ofb) +{ + int size, div = 1, pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd); + unsigned long start[3] = { ofb->video_mem_phys, 0, 0 }; + + if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) { + size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual; + setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size); + } else { + size = ofb->fb.var.xres_virtual * ofb->fb.var.yres_virtual; + switch (pfor) { + case OVERLAY_FORMAT_YUV444_PLANAR: div = 1; break; + case OVERLAY_FORMAT_YUV422_PLANAR: div = 2; break; + case OVERLAY_FORMAT_YUV420_PLANAR: div = 4; break; + } + start[1] = start[0] + size; + start[2] = start[1] + size / div; + setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size); + setup_frame_dma(ofb->fbi, DMA_OV2_Cb, -1, start[1], size / div); + setup_frame_dma(ofb->fbi, DMA_OV2_Cr, -1, start[2], size / div); + } +} + +static void overlay2fb_enable(struct pxafb_layer *ofb) +{ + int pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd); + int enabled = lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN; + uint32_t fdadr2 = ofb->fbi->fdadr[DMA_OV2_Y] | (enabled ? 0x1 : 0); + uint32_t fdadr3 = ofb->fbi->fdadr[DMA_OV2_Cb] | (enabled ? 0x1 : 0); + uint32_t fdadr4 = ofb->fbi->fdadr[DMA_OV2_Cr] | (enabled ? 0x1 : 0); + + if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) + lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2); + else { + lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2); + lcd_writel(ofb->fbi, enabled ? FBR3 : FDADR3, fdadr3); + lcd_writel(ofb->fbi, enabled ? FBR4 : FDADR4, fdadr4); + } + lcd_writel(ofb->fbi, OVL2C2, ofb->control[1]); + lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] | OVLxC1_OEN); +} + +static void overlay2fb_disable(struct pxafb_layer *ofb) +{ + uint32_t lccr5; + + if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN)) + return; + + lccr5 = lcd_readl(ofb->fbi, LCCR5); + + lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN); + + lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(2)); + lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(2)); + lcd_writel(ofb->fbi, FBR2, ofb->fbi->fdadr[DMA_OV2_Y] | 0x3); + lcd_writel(ofb->fbi, FBR3, ofb->fbi->fdadr[DMA_OV2_Cb] | 0x3); + lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3); + + if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0) + pr_warning("%s: timeout disabling overlay2\n", __func__); +} + +static struct pxafb_layer_ops ofb_ops[] = { + [0] = { + .enable = overlay1fb_enable, + .disable = overlay1fb_disable, + .setup = overlay1fb_setup, + }, + [1] = { + .enable = overlay2fb_enable, + .disable = overlay2fb_disable, + .setup = overlay2fb_setup, + }, +}; + +static int overlayfb_open(struct fb_info *info, int user) +{ + struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb); + + /* no support for framebuffer console on overlay */ + if (user == 0) + return -ENODEV; + + if (ofb->usage++ == 0) { + /* unblank the base framebuffer */ + console_lock(); + fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK); + console_unlock(); + } + + return 0; +} + +static int overlayfb_release(struct fb_info *info, int user) +{ + struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb); + + if (ofb->usage == 1) { + ofb->ops->disable(ofb); + ofb->fb.var.height = -1; + ofb->fb.var.width = -1; + ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0; + ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0; + + ofb->usage--; + } + return 0; +} + +static int overlayfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb); + struct fb_var_screeninfo *base_var = &ofb->fbi->fb.var; + int xpos, ypos, pfor, bpp; + + xpos = NONSTD_TO_XPOS(var->nonstd); + ypos = NONSTD_TO_YPOS(var->nonstd); + pfor = NONSTD_TO_PFOR(var->nonstd); + + bpp = pxafb_var_to_bpp(var); + if (bpp < 0) + return -EINVAL; + + /* no support for YUV format on overlay1 */ + if (ofb->id == OVERLAY1 && pfor != 0) + return -EINVAL; + + /* for YUV packed formats, bpp = 'minimum bpp of YUV components' */ + switch (pfor) { + case OVERLAY_FORMAT_RGB: + bpp = pxafb_var_to_bpp(var); + if (bpp < 0) + return -EINVAL; + + pxafb_set_pixfmt(var, var_to_depth(var)); + break; + case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break; + case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 8; break; + case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 4; break; + case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 2; break; + default: + return -EINVAL; + } + + /* each line must start at a 32-bit word boundary */ + if ((xpos * bpp) % 32) + return -EINVAL; + + /* xres must align on 32-bit word boundary */ + var->xres = roundup(var->xres * bpp, 32) / bpp; + + if ((xpos + var->xres > base_var->xres) || + (ypos + var->yres > base_var->yres)) + return -EINVAL; + + var->xres_virtual = var->xres; + var->yres_virtual = max(var->yres, var->yres_virtual); + return 0; +} + +static int overlayfb_check_video_memory(struct pxafb_layer *ofb) +{ + struct fb_var_screeninfo *var = &ofb->fb.var; + int pfor = NONSTD_TO_PFOR(var->nonstd); + int size, bpp = 0; + + switch (pfor) { + case OVERLAY_FORMAT_RGB: bpp = var->bits_per_pixel; break; + case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break; + case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 24; break; + case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 16; break; + case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 12; break; + } + + ofb->fb.fix.line_length = var->xres_virtual * bpp / 8; + + size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual); + + if (ofb->video_mem) { + if (ofb->video_mem_size >= size) + return 0; + } + return -EINVAL; +} + +static int overlayfb_set_par(struct fb_info *info) +{ + struct pxafb_layer *ofb = container_of(info, struct pxafb_layer, fb); + struct fb_var_screeninfo *var = &info->var; + int xpos, ypos, pfor, bpp, ret; + + ret = overlayfb_check_video_memory(ofb); + if (ret) + return ret; + + bpp = pxafb_var_to_bpp(var); + xpos = NONSTD_TO_XPOS(var->nonstd); + ypos = NONSTD_TO_YPOS(var->nonstd); + pfor = NONSTD_TO_PFOR(var->nonstd); + + ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) | + OVLxC1_BPP(bpp); + ofb->control[1] = OVLxC2_XPOS(xpos) | OVLxC2_YPOS(ypos); + + if (ofb->id == OVERLAY2) + ofb->control[1] |= OVL2C2_PFOR(pfor); + + ofb->ops->setup(ofb); + ofb->ops->enable(ofb); + return 0; +} + +static struct fb_ops overlay_fb_ops = { + .owner = THIS_MODULE, + .fb_open = overlayfb_open, + .fb_release = overlayfb_release, + .fb_check_var = overlayfb_check_var, + .fb_set_par = overlayfb_set_par, +}; + +static void init_pxafb_overlay(struct pxafb_info *fbi, struct pxafb_layer *ofb, + int id) +{ + sprintf(ofb->fb.fix.id, "overlay%d", id + 1); + + ofb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + ofb->fb.fix.xpanstep = 0; + ofb->fb.fix.ypanstep = 1; + + ofb->fb.var.activate = FB_ACTIVATE_NOW; + ofb->fb.var.height = -1; + ofb->fb.var.width = -1; + ofb->fb.var.vmode = FB_VMODE_NONINTERLACED; + + ofb->fb.fbops = &overlay_fb_ops; + ofb->fb.flags = FBINFO_FLAG_DEFAULT; + ofb->fb.node = -1; + ofb->fb.pseudo_palette = NULL; + + ofb->id = id; + ofb->ops = &ofb_ops[id]; + ofb->usage = 0; + ofb->fbi = fbi; + init_completion(&ofb->branch_done); +} + +static inline int pxafb_overlay_supported(void) +{ + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) + return 1; + + return 0; +} + +static int pxafb_overlay_map_video_memory(struct pxafb_info *pxafb, + struct pxafb_layer *ofb) +{ + /* We assume that user will use at most video_mem_size for overlay fb, + * anyway, it's useless to use 16bpp main plane and 24bpp overlay + */ + ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size), + GFP_KERNEL | __GFP_ZERO); + if (ofb->video_mem == NULL) + return -ENOMEM; + + ofb->video_mem_phys = virt_to_phys(ofb->video_mem); + ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size); + + mutex_lock(&ofb->fb.mm_lock); + ofb->fb.fix.smem_start = ofb->video_mem_phys; + ofb->fb.fix.smem_len = pxafb->video_mem_size; + mutex_unlock(&ofb->fb.mm_lock); + + ofb->fb.screen_base = ofb->video_mem; + + return 0; +} + +static void pxafb_overlay_init(struct pxafb_info *fbi) +{ + int i, ret; + + if (!pxafb_overlay_supported()) + return; + + for (i = 0; i < 2; i++) { + struct pxafb_layer *ofb = &fbi->overlay[i]; + init_pxafb_overlay(fbi, ofb, i); + ret = register_framebuffer(&ofb->fb); + if (ret) { + dev_err(fbi->dev, "failed to register overlay %d\n", i); + continue; + } + ret = pxafb_overlay_map_video_memory(fbi, ofb); + if (ret) { + dev_err(fbi->dev, + "failed to map video memory for overlay %d\n", + i); + unregister_framebuffer(&ofb->fb); + continue; + } + ofb->registered = 1; + } + + /* mask all IU/BS/EOF/SOF interrupts */ + lcd_writel(fbi, LCCR5, ~0); + + pr_info("PXA Overlay driver loaded successfully!\n"); +} + +static void pxafb_overlay_exit(struct pxafb_info *fbi) +{ + int i; + + if (!pxafb_overlay_supported()) + return; + + for (i = 0; i < 2; i++) { + struct pxafb_layer *ofb = &fbi->overlay[i]; + if (ofb->registered) { + if (ofb->video_mem) + free_pages_exact(ofb->video_mem, + ofb->video_mem_size); + unregister_framebuffer(&ofb->fb); + } + } +} +#else +static inline void pxafb_overlay_init(struct pxafb_info *fbi) {} +static inline void pxafb_overlay_exit(struct pxafb_info *fbi) {} +#endif /* CONFIG_FB_PXA_OVERLAY */ + +/* + * Calculate the PCD value from the clock rate (in picoseconds). + * We take account of the PPCR clock setting. + * From PXA Developer's Manual: + * + * PixelClock = LCLK + * ------------- + * 2 ( PCD + 1 ) + * + * PCD = LCLK + * ------------- - 1 + * 2(PixelClock) + * + * Where: + * LCLK = LCD/Memory Clock + * PCD = LCCR3[7:0] + * + * PixelClock here is in Hz while the pixclock argument given is the + * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 ) + * + * The function get_lclk_frequency_10khz returns LCLK in units of + * 10khz. Calling the result of this function lclk gives us the + * following + * + * PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 ) + * -------------------------------------- - 1 + * 2 + * + * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below. + */ +static inline unsigned int get_pcd(struct pxafb_info *fbi, + unsigned int pixclock) +{ + unsigned long long pcd; + + /* FIXME: Need to take into account Double Pixel Clock mode + * (DPC) bit? or perhaps set it based on the various clock + * speeds */ + pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000); + pcd *= pixclock; + do_div(pcd, 100000000 * 2); + /* no need for this, since we should subtract 1 anyway. they cancel */ + /* pcd += 1; */ /* make up for integer math truncations */ + return (unsigned int)pcd; +} + +/* + * Some touchscreens need hsync information from the video driver to + * function correctly. We export it here. Note that 'hsync_time' and + * the value returned from pxafb_get_hsync_time() is the *reciprocal* + * of the hsync period in seconds. + */ +static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd) +{ + unsigned long htime; + + if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) { + fbi->hsync_time = 0; + return; + } + + htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len); + + fbi->hsync_time = htime; +} + +unsigned long pxafb_get_hsync_time(struct device *dev) +{ + struct pxafb_info *fbi = dev_get_drvdata(dev); + + /* If display is blanked/suspended, hsync isn't active */ + if (!fbi || (fbi->state != C_ENABLE)) + return 0; + + return fbi->hsync_time; +} +EXPORT_SYMBOL(pxafb_get_hsync_time); + +static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, + unsigned long start, size_t size) +{ + struct pxafb_dma_descriptor *dma_desc, *pal_desc; + unsigned int dma_desc_off, pal_desc_off; + + if (dma < 0 || dma >= DMA_MAX * 2) + return -EINVAL; + + dma_desc = &fbi->dma_buff->dma_desc[dma]; + dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]); + + dma_desc->fsadr = start; + dma_desc->fidr = 0; + dma_desc->ldcmd = size; + + if (pal < 0 || pal >= PAL_MAX * 2) { + dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; + fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; + } else { + pal_desc = &fbi->dma_buff->pal_desc[pal]; + pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]); + + pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE; + pal_desc->fidr = 0; + + if ((fbi->lccr4 & LCCR4_PAL_FOR_MASK) == LCCR4_PAL_FOR_0) + pal_desc->ldcmd = fbi->palette_size * sizeof(u16); + else + pal_desc->ldcmd = fbi->palette_size * sizeof(u32); + + pal_desc->ldcmd |= LDCMD_PAL; + + /* flip back and forth between palette and frame buffer */ + pal_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; + dma_desc->fdadr = fbi->dma_buff_phys + pal_desc_off; + fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; + } + + return 0; +} + +static void setup_base_frame(struct pxafb_info *fbi, + struct fb_var_screeninfo *var, + int branch) +{ + struct fb_fix_screeninfo *fix = &fbi->fb.fix; + int nbytes, dma, pal, bpp = var->bits_per_pixel; + unsigned long offset; + + dma = DMA_BASE + (branch ? DMA_MAX : 0); + pal = (bpp >= 16) ? PAL_NONE : PAL_BASE + (branch ? PAL_MAX : 0); + + nbytes = fix->line_length * var->yres; + offset = fix->line_length * var->yoffset + fbi->video_mem_phys; + + if (fbi->lccr0 & LCCR0_SDS) { + nbytes = nbytes / 2; + setup_frame_dma(fbi, dma + 1, PAL_NONE, offset + nbytes, nbytes); + } + + setup_frame_dma(fbi, dma, pal, offset, nbytes); +} + +#ifdef CONFIG_FB_PXA_SMARTPANEL +static int setup_smart_dma(struct pxafb_info *fbi) +{ + struct pxafb_dma_descriptor *dma_desc; + unsigned long dma_desc_off, cmd_buff_off; + + dma_desc = &fbi->dma_buff->dma_desc[DMA_CMD]; + dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[DMA_CMD]); + cmd_buff_off = offsetof(struct pxafb_dma_buff, cmd_buff); + + dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; + dma_desc->fsadr = fbi->dma_buff_phys + cmd_buff_off; + dma_desc->fidr = 0; + dma_desc->ldcmd = fbi->n_smart_cmds * sizeof(uint16_t); + + fbi->fdadr[DMA_CMD] = dma_desc->fdadr; + return 0; +} + +int pxafb_smart_flush(struct fb_info *info) +{ + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + uint32_t prsr; + int ret = 0; + + /* disable controller until all registers are set up */ + lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB); + + /* 1. make it an even number of commands to align on 32-bit boundary + * 2. add the interrupt command to the end of the chain so we can + * keep track of the end of the transfer + */ + + while (fbi->n_smart_cmds & 1) + fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_NOOP; + + fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_INTERRUPT; + fbi->smart_cmds[fbi->n_smart_cmds++] = SMART_CMD_WAIT_FOR_VSYNC; + setup_smart_dma(fbi); + + /* continue to execute next command */ + prsr = lcd_readl(fbi, PRSR) | PRSR_ST_OK | PRSR_CON_NT; + lcd_writel(fbi, PRSR, prsr); + + /* stop the processor in case it executed "wait for sync" cmd */ + lcd_writel(fbi, CMDCR, 0x0001); + + /* don't send interrupts for fifo underruns on channel 6 */ + lcd_writel(fbi, LCCR5, LCCR5_IUM(6)); + + lcd_writel(fbi, LCCR1, fbi->reg_lccr1); + lcd_writel(fbi, LCCR2, fbi->reg_lccr2); + lcd_writel(fbi, LCCR3, fbi->reg_lccr3); + lcd_writel(fbi, LCCR4, fbi->reg_lccr4); + lcd_writel(fbi, FDADR0, fbi->fdadr[0]); + lcd_writel(fbi, FDADR6, fbi->fdadr[6]); + + /* begin sending */ + lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB); + + if (wait_for_completion_timeout(&fbi->command_done, HZ/2) == 0) { + pr_warning("%s: timeout waiting for command done\n", + __func__); + ret = -ETIMEDOUT; + } + + /* quick disable */ + prsr = lcd_readl(fbi, PRSR) & ~(PRSR_ST_OK | PRSR_CON_NT); + lcd_writel(fbi, PRSR, prsr); + lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB); + lcd_writel(fbi, FDADR6, 0); + fbi->n_smart_cmds = 0; + return ret; +} + +int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds) +{ + int i; + struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb); + + for (i = 0; i < n_cmds; i++, cmds++) { + /* if it is a software delay, flush and delay */ + if ((*cmds & 0xff00) == SMART_CMD_DELAY) { + pxafb_smart_flush(info); + mdelay(*cmds & 0xff); + continue; + } + + /* leave 2 commands for INTERRUPT and WAIT_FOR_SYNC */ + if (fbi->n_smart_cmds == CMD_BUFF_SIZE - 8) + pxafb_smart_flush(info); + + fbi->smart_cmds[fbi->n_smart_cmds++] = *cmds; + } + + return 0; +} + +static unsigned int __smart_timing(unsigned time_ns, unsigned long lcd_clk) +{ + unsigned int t = (time_ns * (lcd_clk / 1000000) / 1000); + return (t == 0) ? 1 : t; +} + +static void setup_smart_timing(struct pxafb_info *fbi, + struct fb_var_screeninfo *var) +{ + struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev); + struct pxafb_mode_info *mode = &inf->modes[0]; + unsigned long lclk = clk_get_rate(fbi->clk); + unsigned t1, t2, t3, t4; + + t1 = max(mode->a0csrd_set_hld, mode->a0cswr_set_hld); + t2 = max(mode->rd_pulse_width, mode->wr_pulse_width); + t3 = mode->op_hold_time; + t4 = mode->cmd_inh_time; + + fbi->reg_lccr1 = + LCCR1_DisWdth(var->xres) | + LCCR1_BegLnDel(__smart_timing(t1, lclk)) | + LCCR1_EndLnDel(__smart_timing(t2, lclk)) | + LCCR1_HorSnchWdth(__smart_timing(t3, lclk)); + + fbi->reg_lccr2 = LCCR2_DisHght(var->yres); + fbi->reg_lccr3 = fbi->lccr3 | LCCR3_PixClkDiv(__smart_timing(t4, lclk)); + fbi->reg_lccr3 |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? LCCR3_HSP : 0; + fbi->reg_lccr3 |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? LCCR3_VSP : 0; + + /* FIXME: make this configurable */ + fbi->reg_cmdcr = 1; +} + +static int pxafb_smart_thread(void *arg) +{ + struct pxafb_info *fbi = arg; + struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev); + + if (!inf->smart_update) { + pr_err("%s: not properly initialized, thread terminated\n", + __func__); + return -EINVAL; + } + inf = dev_get_platdata(fbi->dev); + + pr_debug("%s(): task starting\n", __func__); + + set_freezable(); + while (!kthread_should_stop()) { + + if (try_to_freeze()) + continue; + + mutex_lock(&fbi->ctrlr_lock); + + if (fbi->state == C_ENABLE) { + inf->smart_update(&fbi->fb); + complete(&fbi->refresh_done); + } + + mutex_unlock(&fbi->ctrlr_lock); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(30)); + } + + pr_debug("%s(): task ending\n", __func__); + return 0; +} + +static int pxafb_smart_init(struct pxafb_info *fbi) +{ + if (!(fbi->lccr0 & LCCR0_LCDT)) + return 0; + + fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; + fbi->n_smart_cmds = 0; + + init_completion(&fbi->command_done); + init_completion(&fbi->refresh_done); + + fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi, + "lcd_refresh"); + if (IS_ERR(fbi->smart_thread)) { + pr_err("%s: unable to create kernel thread\n", __func__); + return PTR_ERR(fbi->smart_thread); + } + + return 0; +} +#else +static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; } +#endif /* CONFIG_FB_PXA_SMARTPANEL */ + +static void setup_parallel_timing(struct pxafb_info *fbi, + struct fb_var_screeninfo *var) +{ + unsigned int lines_per_panel, pcd = get_pcd(fbi, var->pixclock); + + fbi->reg_lccr1 = + LCCR1_DisWdth(var->xres) + + LCCR1_HorSnchWdth(var->hsync_len) + + LCCR1_BegLnDel(var->left_margin) + + LCCR1_EndLnDel(var->right_margin); + + /* + * If we have a dual scan LCD, we need to halve + * the YRES parameter. + */ + lines_per_panel = var->yres; + if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual) + lines_per_panel /= 2; + + fbi->reg_lccr2 = + LCCR2_DisHght(lines_per_panel) + + LCCR2_VrtSnchWdth(var->vsync_len) + + LCCR2_BegFrmDel(var->upper_margin) + + LCCR2_EndFrmDel(var->lower_margin); + + fbi->reg_lccr3 = fbi->lccr3 | + (var->sync & FB_SYNC_HOR_HIGH_ACT ? + LCCR3_HorSnchH : LCCR3_HorSnchL) | + (var->sync & FB_SYNC_VERT_HIGH_ACT ? + LCCR3_VrtSnchH : LCCR3_VrtSnchL); + + if (pcd) { + fbi->reg_lccr3 |= LCCR3_PixClkDiv(pcd); + set_hsync_time(fbi, pcd); + } +} + +/* + * pxafb_activate_var(): + * Configures LCD Controller based on entries in var parameter. + * Settings are only written to the controller if changes were made. + */ +static int pxafb_activate_var(struct fb_var_screeninfo *var, + struct pxafb_info *fbi) +{ + u_long flags; + + /* Update shadow copy atomically */ + local_irq_save(flags); + +#ifdef CONFIG_FB_PXA_SMARTPANEL + if (fbi->lccr0 & LCCR0_LCDT) + setup_smart_timing(fbi, var); + else +#endif + setup_parallel_timing(fbi, var); + + setup_base_frame(fbi, var, 0); + + fbi->reg_lccr0 = fbi->lccr0 | + (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | + LCCR0_QDM | LCCR0_BM | LCCR0_OUM); + + fbi->reg_lccr3 |= pxafb_var_to_lccr3(var); + + fbi->reg_lccr4 = lcd_readl(fbi, LCCR4) & ~LCCR4_PAL_FOR_MASK; + fbi->reg_lccr4 |= (fbi->lccr4 & LCCR4_PAL_FOR_MASK); + local_irq_restore(flags); + + /* + * Only update the registers if the controller is enabled + * and something has changed. + */ + if ((lcd_readl(fbi, LCCR0) != fbi->reg_lccr0) || + (lcd_readl(fbi, LCCR1) != fbi->reg_lccr1) || + (lcd_readl(fbi, LCCR2) != fbi->reg_lccr2) || + (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) || + (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) || + (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) || + ((fbi->lccr0 & LCCR0_SDS) && + (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))) + pxafb_schedule_work(fbi, C_REENABLE); + + return 0; +} + +/* + * NOTE! The following functions are purely helpers for set_ctrlr_state. + * Do not call them directly; set_ctrlr_state does the correct serialisation + * to ensure that things happen in the right way 100% of time time. + * -- rmk + */ +static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) +{ + pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff"); + + if (fbi->backlight_power) + fbi->backlight_power(on); +} + +static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) +{ + pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff"); + + if (fbi->lcd_power) + fbi->lcd_power(on, &fbi->fb.var); +} + +static void pxafb_enable_controller(struct pxafb_info *fbi) +{ + pr_debug("pxafb: Enabling LCD controller\n"); + pr_debug("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr[0]); + pr_debug("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr[1]); + pr_debug("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0); + pr_debug("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1); + pr_debug("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2); + pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); + + /* enable LCD controller clock */ + clk_prepare_enable(fbi->clk); + + if (fbi->lccr0 & LCCR0_LCDT) + return; + + /* Sequence from 11.7.10 */ + lcd_writel(fbi, LCCR4, fbi->reg_lccr4); + lcd_writel(fbi, LCCR3, fbi->reg_lccr3); + lcd_writel(fbi, LCCR2, fbi->reg_lccr2); + lcd_writel(fbi, LCCR1, fbi->reg_lccr1); + lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB); + + lcd_writel(fbi, FDADR0, fbi->fdadr[0]); + if (fbi->lccr0 & LCCR0_SDS) + lcd_writel(fbi, FDADR1, fbi->fdadr[1]); + lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB); +} + +static void pxafb_disable_controller(struct pxafb_info *fbi) +{ + uint32_t lccr0; + +#ifdef CONFIG_FB_PXA_SMARTPANEL + if (fbi->lccr0 & LCCR0_LCDT) { + wait_for_completion_timeout(&fbi->refresh_done, + msecs_to_jiffies(200)); + return; + } +#endif + + /* Clear LCD Status Register */ + lcd_writel(fbi, LCSR, 0xffffffff); + + lccr0 = lcd_readl(fbi, LCCR0) & ~LCCR0_LDM; + lcd_writel(fbi, LCCR0, lccr0); + lcd_writel(fbi, LCCR0, lccr0 | LCCR0_DIS); + + wait_for_completion_timeout(&fbi->disable_done, msecs_to_jiffies(200)); + + /* disable LCD controller clock */ + clk_disable_unprepare(fbi->clk); +} + +/* + * pxafb_handle_irq: Handle 'LCD DONE' interrupts. + */ +static irqreturn_t pxafb_handle_irq(int irq, void *dev_id) +{ + struct pxafb_info *fbi = dev_id; + unsigned int lccr0, lcsr; + + lcsr = lcd_readl(fbi, LCSR); + if (lcsr & LCSR_LDD) { + lccr0 = lcd_readl(fbi, LCCR0); + lcd_writel(fbi, LCCR0, lccr0 | LCCR0_LDM); + complete(&fbi->disable_done); + } + +#ifdef CONFIG_FB_PXA_SMARTPANEL + if (lcsr & LCSR_CMD_INT) + complete(&fbi->command_done); +#endif + lcd_writel(fbi, LCSR, lcsr); + +#ifdef CONFIG_FB_PXA_OVERLAY + { + unsigned int lcsr1 = lcd_readl(fbi, LCSR1); + if (lcsr1 & LCSR1_BS(1)) + complete(&fbi->overlay[0].branch_done); + + if (lcsr1 & LCSR1_BS(2)) + complete(&fbi->overlay[1].branch_done); + + lcd_writel(fbi, LCSR1, lcsr1); + } +#endif + return IRQ_HANDLED; +} + +/* + * This function must be called from task context only, since it will + * sleep when disabling the LCD controller, or if we get two contending + * processes trying to alter state. + */ +static void set_ctrlr_state(struct pxafb_info *fbi, u_int state) +{ + u_int old_state; + + mutex_lock(&fbi->ctrlr_lock); + + old_state = fbi->state; + + /* + * Hack around fbcon initialisation. + */ + if (old_state == C_STARTUP && state == C_REENABLE) + state = C_ENABLE; + + switch (state) { + case C_DISABLE_CLKCHANGE: + /* + * Disable controller for clock change. If the + * controller is already disabled, then do nothing. + */ + if (old_state != C_DISABLE && old_state != C_DISABLE_PM) { + fbi->state = state; + /* TODO __pxafb_lcd_power(fbi, 0); */ + pxafb_disable_controller(fbi); + } + break; + + case C_DISABLE_PM: + case C_DISABLE: + /* + * Disable controller + */ + if (old_state != C_DISABLE) { + fbi->state = state; + __pxafb_backlight_power(fbi, 0); + __pxafb_lcd_power(fbi, 0); + if (old_state != C_DISABLE_CLKCHANGE) + pxafb_disable_controller(fbi); + } + break; + + case C_ENABLE_CLKCHANGE: + /* + * Enable the controller after clock change. Only + * do this if we were disabled for the clock change. + */ + if (old_state == C_DISABLE_CLKCHANGE) { + fbi->state = C_ENABLE; + pxafb_enable_controller(fbi); + /* TODO __pxafb_lcd_power(fbi, 1); */ + } + break; + + case C_REENABLE: + /* + * Re-enable the controller only if it was already + * enabled. This is so we reprogram the control + * registers. + */ + if (old_state == C_ENABLE) { + __pxafb_lcd_power(fbi, 0); + pxafb_disable_controller(fbi); + pxafb_enable_controller(fbi); + __pxafb_lcd_power(fbi, 1); + } + break; + + case C_ENABLE_PM: + /* + * Re-enable the controller after PM. This is not + * perfect - think about the case where we were doing + * a clock change, and we suspended half-way through. + */ + if (old_state != C_DISABLE_PM) + break; + /* fall through */ + + case C_ENABLE: + /* + * Power up the LCD screen, enable controller, and + * turn on the backlight. + */ + if (old_state != C_ENABLE) { + fbi->state = C_ENABLE; + pxafb_enable_controller(fbi); + __pxafb_lcd_power(fbi, 1); + __pxafb_backlight_power(fbi, 1); + } + break; + } + mutex_unlock(&fbi->ctrlr_lock); +} + +/* + * Our LCD controller task (which is called when we blank or unblank) + * via keventd. + */ +static void pxafb_task(struct work_struct *work) +{ + struct pxafb_info *fbi = + container_of(work, struct pxafb_info, task); + u_int state = xchg(&fbi->task_state, -1); + + set_ctrlr_state(fbi, state); +} + +#ifdef CONFIG_CPU_FREQ +/* + * CPU clock speed change handler. We need to adjust the LCD timing + * parameters when the CPU clock is adjusted by the power management + * subsystem. + * + * TODO: Determine why f->new != 10*get_lclk_frequency_10khz() + */ +static int +pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data) +{ + struct pxafb_info *fbi = TO_INF(nb, freq_transition); + /* TODO struct cpufreq_freqs *f = data; */ + u_int pcd; + + switch (val) { + case CPUFREQ_PRECHANGE: +#ifdef CONFIG_FB_PXA_OVERLAY + if (!(fbi->overlay[0].usage || fbi->overlay[1].usage)) +#endif + set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); + break; + + case CPUFREQ_POSTCHANGE: + pcd = get_pcd(fbi, fbi->fb.var.pixclock); + set_hsync_time(fbi, pcd); + fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | + LCCR3_PixClkDiv(pcd); + set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); + break; + } + return 0; +} + +static int +pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) +{ + struct pxafb_info *fbi = TO_INF(nb, freq_policy); + struct fb_var_screeninfo *var = &fbi->fb.var; + struct cpufreq_policy *policy = data; + + switch (val) { + case CPUFREQ_ADJUST: + case CPUFREQ_INCOMPATIBLE: + pr_debug("min dma period: %d ps, " + "new clock %d kHz\n", pxafb_display_dma_period(var), + policy->max); + /* TODO: fill in min/max values */ + break; + } + return 0; +} +#endif + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ +static int pxafb_suspend(struct device *dev) +{ + struct pxafb_info *fbi = dev_get_drvdata(dev); + + set_ctrlr_state(fbi, C_DISABLE_PM); + return 0; +} + +static int pxafb_resume(struct device *dev) +{ + struct pxafb_info *fbi = dev_get_drvdata(dev); + + set_ctrlr_state(fbi, C_ENABLE_PM); + return 0; +} + +static const struct dev_pm_ops pxafb_pm_ops = { + .suspend = pxafb_suspend, + .resume = pxafb_resume, +}; +#endif + +static int pxafb_init_video_memory(struct pxafb_info *fbi) +{ + int size = PAGE_ALIGN(fbi->video_mem_size); + + fbi->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO); + if (fbi->video_mem == NULL) + return -ENOMEM; + + fbi->video_mem_phys = virt_to_phys(fbi->video_mem); + fbi->video_mem_size = size; + + fbi->fb.fix.smem_start = fbi->video_mem_phys; + fbi->fb.fix.smem_len = fbi->video_mem_size; + fbi->fb.screen_base = fbi->video_mem; + + return fbi->video_mem ? 0 : -ENOMEM; +} + +static void pxafb_decode_mach_info(struct pxafb_info *fbi, + struct pxafb_mach_info *inf) +{ + unsigned int lcd_conn = inf->lcd_conn; + struct pxafb_mode_info *m; + int i; + + fbi->cmap_inverse = inf->cmap_inverse; + fbi->cmap_static = inf->cmap_static; + fbi->lccr4 = inf->lccr4; + + switch (lcd_conn & LCD_TYPE_MASK) { + case LCD_TYPE_MONO_STN: + fbi->lccr0 = LCCR0_CMS; + break; + case LCD_TYPE_MONO_DSTN: + fbi->lccr0 = LCCR0_CMS | LCCR0_SDS; + break; + case LCD_TYPE_COLOR_STN: + fbi->lccr0 = 0; + break; + case LCD_TYPE_COLOR_DSTN: + fbi->lccr0 = LCCR0_SDS; + break; + case LCD_TYPE_COLOR_TFT: + fbi->lccr0 = LCCR0_PAS; + break; + case LCD_TYPE_SMART_PANEL: + fbi->lccr0 = LCCR0_LCDT | LCCR0_PAS; + break; + default: + /* fall back to backward compatibility way */ + fbi->lccr0 = inf->lccr0; + fbi->lccr3 = inf->lccr3; + goto decode_mode; + } + + if (lcd_conn == LCD_MONO_STN_8BPP) + fbi->lccr0 |= LCCR0_DPD; + + fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0; + + fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff); + fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0; + fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0; + +decode_mode: + pxafb_setmode(&fbi->fb.var, &inf->modes[0]); + + /* decide video memory size as follows: + * 1. default to mode of maximum resolution + * 2. allow platform to override + * 3. allow module parameter to override + */ + for (i = 0, m = &inf->modes[0]; i < inf->num_modes; i++, m++) + fbi->video_mem_size = max_t(size_t, fbi->video_mem_size, + m->xres * m->yres * m->bpp / 8); + + if (inf->video_mem_size > fbi->video_mem_size) + fbi->video_mem_size = inf->video_mem_size; + + if (video_mem_size > fbi->video_mem_size) + fbi->video_mem_size = video_mem_size; +} + +static struct pxafb_info *pxafb_init_fbinfo(struct device *dev) +{ + struct pxafb_info *fbi; + void *addr; + struct pxafb_mach_info *inf = dev_get_platdata(dev); + + /* Alloc the pxafb_info and pseudo_palette in one step */ + fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL); + if (!fbi) + return NULL; + + memset(fbi, 0, sizeof(struct pxafb_info)); + fbi->dev = dev; + + fbi->clk = clk_get(dev, NULL); + if (IS_ERR(fbi->clk)) { + kfree(fbi); + return NULL; + } + + strcpy(fbi->fb.fix.id, PXA_NAME); + + fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; + fbi->fb.fix.type_aux = 0; + fbi->fb.fix.xpanstep = 0; + fbi->fb.fix.ypanstep = 1; + fbi->fb.fix.ywrapstep = 0; + fbi->fb.fix.accel = FB_ACCEL_NONE; + + fbi->fb.var.nonstd = 0; + fbi->fb.var.activate = FB_ACTIVATE_NOW; + fbi->fb.var.height = -1; + fbi->fb.var.width = -1; + fbi->fb.var.accel_flags = FB_ACCELF_TEXT; + fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; + + fbi->fb.fbops = &pxafb_ops; + fbi->fb.flags = FBINFO_DEFAULT; + fbi->fb.node = -1; + + addr = fbi; + addr = addr + sizeof(struct pxafb_info); + fbi->fb.pseudo_palette = addr; + + fbi->state = C_STARTUP; + fbi->task_state = (u_char)-1; + + pxafb_decode_mach_info(fbi, inf); + +#ifdef CONFIG_FB_PXA_OVERLAY + /* place overlay(s) on top of base */ + if (pxafb_overlay_supported()) + fbi->lccr0 |= LCCR0_OUC; +#endif + + init_waitqueue_head(&fbi->ctrlr_wait); + INIT_WORK(&fbi->task, pxafb_task); + mutex_init(&fbi->ctrlr_lock); + init_completion(&fbi->disable_done); + + return fbi; +} + +#ifdef CONFIG_FB_PXA_PARAMETERS +static int parse_opt_mode(struct device *dev, const char *this_opt) +{ + struct pxafb_mach_info *inf = dev_get_platdata(dev); + + const char *name = this_opt+5; + unsigned int namelen = strlen(name); + int res_specified = 0, bpp_specified = 0; + unsigned int xres = 0, yres = 0, bpp = 0; + int yres_specified = 0; + int i; + for (i = namelen-1; i >= 0; i--) { + switch (name[i]) { + case '-': + namelen = i; + if (!bpp_specified && !yres_specified) { + bpp = simple_strtoul(&name[i+1], NULL, 0); + bpp_specified = 1; + } else + goto done; + break; + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&name[i+1], NULL, 0); + yres_specified = 1; + } else + goto done; + break; + case '0' ... '9': + break; + default: + goto done; + } + } + if (i < 0 && yres_specified) { + xres = simple_strtoul(name, NULL, 0); + res_specified = 1; + } +done: + if (res_specified) { + dev_info(dev, "overriding resolution: %dx%d\n", xres, yres); + inf->modes[0].xres = xres; inf->modes[0].yres = yres; + } + if (bpp_specified) + switch (bpp) { + case 1: + case 2: + case 4: + case 8: + case 16: + inf->modes[0].bpp = bpp; + dev_info(dev, "overriding bit depth: %d\n", bpp); + break; + default: + dev_err(dev, "Depth %d is not valid\n", bpp); + return -EINVAL; + } + return 0; +} + +static int parse_opt(struct device *dev, char *this_opt) +{ + struct pxafb_mach_info *inf = dev_get_platdata(dev); + struct pxafb_mode_info *mode = &inf->modes[0]; + char s[64]; + + s[0] = '\0'; + + if (!strncmp(this_opt, "vmem:", 5)) { + video_mem_size = memparse(this_opt + 5, NULL); + } else if (!strncmp(this_opt, "mode:", 5)) { + return parse_opt_mode(dev, this_opt); + } else if (!strncmp(this_opt, "pixclock:", 9)) { + mode->pixclock = simple_strtoul(this_opt+9, NULL, 0); + sprintf(s, "pixclock: %ld\n", mode->pixclock); + } else if (!strncmp(this_opt, "left:", 5)) { + mode->left_margin = simple_strtoul(this_opt+5, NULL, 0); + sprintf(s, "left: %u\n", mode->left_margin); + } else if (!strncmp(this_opt, "right:", 6)) { + mode->right_margin = simple_strtoul(this_opt+6, NULL, 0); + sprintf(s, "right: %u\n", mode->right_margin); + } else if (!strncmp(this_opt, "upper:", 6)) { + mode->upper_margin = simple_strtoul(this_opt+6, NULL, 0); + sprintf(s, "upper: %u\n", mode->upper_margin); + } else if (!strncmp(this_opt, "lower:", 6)) { + mode->lower_margin = simple_strtoul(this_opt+6, NULL, 0); + sprintf(s, "lower: %u\n", mode->lower_margin); + } else if (!strncmp(this_opt, "hsynclen:", 9)) { + mode->hsync_len = simple_strtoul(this_opt+9, NULL, 0); + sprintf(s, "hsynclen: %u\n", mode->hsync_len); + } else if (!strncmp(this_opt, "vsynclen:", 9)) { + mode->vsync_len = simple_strtoul(this_opt+9, NULL, 0); + sprintf(s, "vsynclen: %u\n", mode->vsync_len); + } else if (!strncmp(this_opt, "hsync:", 6)) { + if (simple_strtoul(this_opt+6, NULL, 0) == 0) { + sprintf(s, "hsync: Active Low\n"); + mode->sync &= ~FB_SYNC_HOR_HIGH_ACT; + } else { + sprintf(s, "hsync: Active High\n"); + mode->sync |= FB_SYNC_HOR_HIGH_ACT; + } + } else if (!strncmp(this_opt, "vsync:", 6)) { + if (simple_strtoul(this_opt+6, NULL, 0) == 0) { + sprintf(s, "vsync: Active Low\n"); + mode->sync &= ~FB_SYNC_VERT_HIGH_ACT; + } else { + sprintf(s, "vsync: Active High\n"); + mode->sync |= FB_SYNC_VERT_HIGH_ACT; + } + } else if (!strncmp(this_opt, "dpc:", 4)) { + if (simple_strtoul(this_opt+4, NULL, 0) == 0) { + sprintf(s, "double pixel clock: false\n"); + inf->lccr3 &= ~LCCR3_DPC; + } else { + sprintf(s, "double pixel clock: true\n"); + inf->lccr3 |= LCCR3_DPC; + } + } else if (!strncmp(this_opt, "outputen:", 9)) { + if (simple_strtoul(this_opt+9, NULL, 0) == 0) { + sprintf(s, "output enable: active low\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL; + } else { + sprintf(s, "output enable: active high\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH; + } + } else if (!strncmp(this_opt, "pixclockpol:", 12)) { + if (simple_strtoul(this_opt+12, NULL, 0) == 0) { + sprintf(s, "pixel clock polarity: falling edge\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg; + } else { + sprintf(s, "pixel clock polarity: rising edge\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg; + } + } else if (!strncmp(this_opt, "color", 5)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color; + } else if (!strncmp(this_opt, "mono", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono; + } else if (!strncmp(this_opt, "active", 6)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act; + } else if (!strncmp(this_opt, "passive", 7)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas; + } else if (!strncmp(this_opt, "single", 6)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl; + } else if (!strncmp(this_opt, "dual", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual; + } else if (!strncmp(this_opt, "4pix", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono; + } else if (!strncmp(this_opt, "8pix", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono; + } else { + dev_err(dev, "unknown option: %s\n", this_opt); + return -EINVAL; + } + + if (s[0] != '\0') + dev_info(dev, "override %s", s); + + return 0; +} + +static int pxafb_parse_options(struct device *dev, char *options) +{ + char *this_opt; + int ret; + + if (!options || !*options) + return 0; + + dev_dbg(dev, "options are \"%s\"\n", options ? options : "null"); + + /* could be made table driven or similar?... */ + while ((this_opt = strsep(&options, ",")) != NULL) { + ret = parse_opt(dev, this_opt); + if (ret) + return ret; + } + return 0; +} + +static char g_options[256] = ""; + +#ifndef MODULE +static int __init pxafb_setup_options(void) +{ + char *options = NULL; + + if (fb_get_options("pxafb", &options)) + return -ENODEV; + + if (options) + strlcpy(g_options, options, sizeof(g_options)); + + return 0; +} +#else +#define pxafb_setup_options() (0) + +module_param_string(options, g_options, sizeof(g_options), 0); +MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); +#endif + +#else +#define pxafb_parse_options(...) (0) +#define pxafb_setup_options() (0) +#endif + +#ifdef DEBUG_VAR +/* Check for various illegal bit-combinations. Currently only + * a warning is given. */ +static void pxafb_check_options(struct device *dev, struct pxafb_mach_info *inf) +{ + if (inf->lcd_conn) + return; + + if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK) + dev_warn(dev, "machine LCCR0 setting contains " + "illegal bits: %08x\n", + inf->lccr0 & LCCR0_INVALID_CONFIG_MASK); + if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK) + dev_warn(dev, "machine LCCR3 setting contains " + "illegal bits: %08x\n", + inf->lccr3 & LCCR3_INVALID_CONFIG_MASK); + if (inf->lccr0 & LCCR0_DPD && + ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas || + (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl || + (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono)) + dev_warn(dev, "Double Pixel Data (DPD) mode is " + "only valid in passive mono" + " single panel mode\n"); + if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act && + (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual) + dev_warn(dev, "Dual panel only valid in passive mode\n"); + if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas && + (inf->modes->upper_margin || inf->modes->lower_margin)) + dev_warn(dev, "Upper and lower margins must be 0 in " + "passive mode\n"); +} +#else +#define pxafb_check_options(...) do {} while (0) +#endif + +static int pxafb_probe(struct platform_device *dev) +{ + struct pxafb_info *fbi; + struct pxafb_mach_info *inf; + struct resource *r; + int irq, ret; + + dev_dbg(&dev->dev, "pxafb_probe\n"); + + inf = dev_get_platdata(&dev->dev); + ret = -ENOMEM; + fbi = NULL; + if (!inf) + goto failed; + + ret = pxafb_parse_options(&dev->dev, g_options); + if (ret < 0) + goto failed; + + pxafb_check_options(&dev->dev, inf); + + dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n", + inf->modes->xres, + inf->modes->yres, + inf->modes->bpp); + if (inf->modes->xres == 0 || + inf->modes->yres == 0 || + inf->modes->bpp == 0) { + dev_err(&dev->dev, "Invalid resolution or bit depth\n"); + ret = -EINVAL; + goto failed; + } + + fbi = pxafb_init_fbinfo(&dev->dev); + if (!fbi) { + /* only reason for pxafb_init_fbinfo to fail is kmalloc */ + dev_err(&dev->dev, "Failed to initialize framebuffer device\n"); + ret = -ENOMEM; + goto failed; + } + + if (cpu_is_pxa3xx() && inf->acceleration_enabled) + fbi->fb.fix.accel = FB_ACCEL_PXA3XX; + + fbi->backlight_power = inf->pxafb_backlight_power; + fbi->lcd_power = inf->pxafb_lcd_power; + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&dev->dev, "no I/O memory resource defined\n"); + ret = -ENODEV; + goto failed_fbi; + } + + r = request_mem_region(r->start, resource_size(r), dev->name); + if (r == NULL) { + dev_err(&dev->dev, "failed to request I/O memory\n"); + ret = -EBUSY; + goto failed_fbi; + } + + fbi->mmio_base = ioremap(r->start, resource_size(r)); + if (fbi->mmio_base == NULL) { + dev_err(&dev->dev, "failed to map I/O memory\n"); + ret = -EBUSY; + goto failed_free_res; + } + + fbi->dma_buff_size = PAGE_ALIGN(sizeof(struct pxafb_dma_buff)); + fbi->dma_buff = dma_alloc_coherent(fbi->dev, fbi->dma_buff_size, + &fbi->dma_buff_phys, GFP_KERNEL); + if (fbi->dma_buff == NULL) { + dev_err(&dev->dev, "failed to allocate memory for DMA\n"); + ret = -ENOMEM; + goto failed_free_io; + } + + ret = pxafb_init_video_memory(fbi); + if (ret) { + dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret); + ret = -ENOMEM; + goto failed_free_dma; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no IRQ defined\n"); + ret = -ENODEV; + goto failed_free_mem; + } + + ret = request_irq(irq, pxafb_handle_irq, 0, "LCD", fbi); + if (ret) { + dev_err(&dev->dev, "request_irq failed: %d\n", ret); + ret = -EBUSY; + goto failed_free_mem; + } + + ret = pxafb_smart_init(fbi); + if (ret) { + dev_err(&dev->dev, "failed to initialize smartpanel\n"); + goto failed_free_irq; + } + + /* + * This makes sure that our colour bitfield + * descriptors are correctly initialised. + */ + ret = pxafb_check_var(&fbi->fb.var, &fbi->fb); + if (ret) { + dev_err(&dev->dev, "failed to get suitable mode\n"); + goto failed_free_irq; + } + + ret = pxafb_set_par(&fbi->fb); + if (ret) { + dev_err(&dev->dev, "Failed to set parameters\n"); + goto failed_free_irq; + } + + platform_set_drvdata(dev, fbi); + + ret = register_framebuffer(&fbi->fb); + if (ret < 0) { + dev_err(&dev->dev, + "Failed to register framebuffer device: %d\n", ret); + goto failed_free_cmap; + } + + pxafb_overlay_init(fbi); + +#ifdef CONFIG_CPU_FREQ + fbi->freq_transition.notifier_call = pxafb_freq_transition; + fbi->freq_policy.notifier_call = pxafb_freq_policy; + cpufreq_register_notifier(&fbi->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_register_notifier(&fbi->freq_policy, + CPUFREQ_POLICY_NOTIFIER); +#endif + + /* + * Ok, now enable the LCD controller + */ + set_ctrlr_state(fbi, C_ENABLE); + + return 0; + +failed_free_cmap: + if (fbi->fb.cmap.len) + fb_dealloc_cmap(&fbi->fb.cmap); +failed_free_irq: + free_irq(irq, fbi); +failed_free_mem: + free_pages_exact(fbi->video_mem, fbi->video_mem_size); +failed_free_dma: + dma_free_coherent(&dev->dev, fbi->dma_buff_size, + fbi->dma_buff, fbi->dma_buff_phys); +failed_free_io: + iounmap(fbi->mmio_base); +failed_free_res: + release_mem_region(r->start, resource_size(r)); +failed_fbi: + clk_put(fbi->clk); + kfree(fbi); +failed: + return ret; +} + +static int pxafb_remove(struct platform_device *dev) +{ + struct pxafb_info *fbi = platform_get_drvdata(dev); + struct resource *r; + int irq; + struct fb_info *info; + + if (!fbi) + return 0; + + info = &fbi->fb; + + pxafb_overlay_exit(fbi); + unregister_framebuffer(info); + + pxafb_disable_controller(fbi); + + if (fbi->fb.cmap.len) + fb_dealloc_cmap(&fbi->fb.cmap); + + irq = platform_get_irq(dev, 0); + free_irq(irq, fbi); + + free_pages_exact(fbi->video_mem, fbi->video_mem_size); + + dma_free_writecombine(&dev->dev, fbi->dma_buff_size, + fbi->dma_buff, fbi->dma_buff_phys); + + iounmap(fbi->mmio_base); + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + release_mem_region(r->start, resource_size(r)); + + clk_put(fbi->clk); + kfree(fbi); + + return 0; +} + +static struct platform_driver pxafb_driver = { + .probe = pxafb_probe, + .remove = pxafb_remove, + .driver = { + .name = "pxa2xx-fb", +#ifdef CONFIG_PM + .pm = &pxafb_pm_ops, +#endif + }, +}; + +static int __init pxafb_init(void) +{ + if (pxafb_setup_options()) + return -EINVAL; + + return platform_driver_register(&pxafb_driver); +} + +static void __exit pxafb_exit(void) +{ + platform_driver_unregister(&pxafb_driver); +} + +module_init(pxafb_init); +module_exit(pxafb_exit); + +MODULE_DESCRIPTION("loadable framebuffer driver for PXA"); +MODULE_LICENSE("GPL"); -- cgit 1.2.3-korg