From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/usb/usbip/Kconfig | 41 + kernel/drivers/usb/usbip/Makefile | 10 + kernel/drivers/usb/usbip/README | 7 + kernel/drivers/usb/usbip/stub.h | 113 +++ kernel/drivers/usb/usbip/stub_dev.c | 502 ++++++++++++ kernel/drivers/usb/usbip/stub_main.c | 335 ++++++++ kernel/drivers/usb/usbip/stub_rx.c | 594 ++++++++++++++ kernel/drivers/usb/usbip/stub_tx.c | 398 +++++++++ kernel/drivers/usb/usbip/usbip_common.c | 776 ++++++++++++++++++ kernel/drivers/usb/usbip/usbip_common.h | 335 ++++++++ kernel/drivers/usb/usbip/usbip_event.c | 128 +++ kernel/drivers/usb/usbip/usbip_protocol.txt | 358 ++++++++ kernel/drivers/usb/usbip/vhci.h | 129 +++ kernel/drivers/usb/usbip/vhci_hcd.c | 1168 +++++++++++++++++++++++++++ kernel/drivers/usb/usbip/vhci_rx.c | 268 ++++++ kernel/drivers/usb/usbip/vhci_sysfs.c | 252 ++++++ kernel/drivers/usb/usbip/vhci_tx.c | 224 +++++ 17 files changed, 5638 insertions(+) create mode 100644 kernel/drivers/usb/usbip/Kconfig create mode 100644 kernel/drivers/usb/usbip/Makefile create mode 100644 kernel/drivers/usb/usbip/README create mode 100644 kernel/drivers/usb/usbip/stub.h create mode 100644 kernel/drivers/usb/usbip/stub_dev.c create mode 100644 kernel/drivers/usb/usbip/stub_main.c create mode 100644 kernel/drivers/usb/usbip/stub_rx.c create mode 100644 kernel/drivers/usb/usbip/stub_tx.c create mode 100644 kernel/drivers/usb/usbip/usbip_common.c create mode 100644 kernel/drivers/usb/usbip/usbip_common.h create mode 100644 kernel/drivers/usb/usbip/usbip_event.c create mode 100644 kernel/drivers/usb/usbip/usbip_protocol.txt create mode 100644 kernel/drivers/usb/usbip/vhci.h create mode 100644 kernel/drivers/usb/usbip/vhci_hcd.c create mode 100644 kernel/drivers/usb/usbip/vhci_rx.c create mode 100644 kernel/drivers/usb/usbip/vhci_sysfs.c create mode 100644 kernel/drivers/usb/usbip/vhci_tx.c (limited to 'kernel/drivers/usb/usbip') diff --git a/kernel/drivers/usb/usbip/Kconfig b/kernel/drivers/usb/usbip/Kconfig new file mode 100644 index 000000000..bd99e9e47 --- /dev/null +++ b/kernel/drivers/usb/usbip/Kconfig @@ -0,0 +1,41 @@ +config USBIP_CORE + tristate "USB/IP support" + depends on USB && NET + ---help--- + This enables pushing USB packets over IP to allow remote + machines direct access to USB devices. It provides the + USB/IP core that is required by both drivers. + + For more details, and to get the userspace utility + programs, please see . + + To compile this as a module, choose M here: the module will + be called usbip-core. + + If unsure, say N. + +config USBIP_VHCI_HCD + tristate "VHCI hcd" + depends on USBIP_CORE + ---help--- + This enables the USB/IP virtual host controller driver, + which is run on the remote machine. + + To compile this driver as a module, choose M here: the + module will be called vhci-hcd. + +config USBIP_HOST + tristate "Host driver" + depends on USBIP_CORE + ---help--- + This enables the USB/IP host driver, which is run on the + machine that is sharing the USB devices. + + To compile this driver as a module, choose M here: the + module will be called usbip-host. + +config USBIP_DEBUG + bool "Debug messages for USB/IP" + depends on USBIP_CORE + ---help--- + This enables the debug messages from the USB/IP drivers. diff --git a/kernel/drivers/usb/usbip/Makefile b/kernel/drivers/usb/usbip/Makefile new file mode 100644 index 000000000..9ecd61545 --- /dev/null +++ b/kernel/drivers/usb/usbip/Makefile @@ -0,0 +1,10 @@ +ccflags-$(CONFIG_USBIP_DEBUG) := -DDEBUG + +obj-$(CONFIG_USBIP_CORE) += usbip-core.o +usbip-core-y := usbip_common.o usbip_event.o + +obj-$(CONFIG_USBIP_VHCI_HCD) += vhci-hcd.o +vhci-hcd-y := vhci_sysfs.o vhci_tx.o vhci_rx.o vhci_hcd.o + +obj-$(CONFIG_USBIP_HOST) += usbip-host.o +usbip-host-y := stub_dev.o stub_main.o stub_rx.o stub_tx.o diff --git a/kernel/drivers/usb/usbip/README b/kernel/drivers/usb/usbip/README new file mode 100644 index 000000000..41a2cf2e7 --- /dev/null +++ b/kernel/drivers/usb/usbip/README @@ -0,0 +1,7 @@ +TODO: + - more discussion about the protocol + - testing + - review of the userspace interface + - document the protocol + +Please send patches for this code to Greg Kroah-Hartman diff --git a/kernel/drivers/usb/usbip/stub.h b/kernel/drivers/usb/usbip/stub.h new file mode 100644 index 000000000..266e2b0ce --- /dev/null +++ b/kernel/drivers/usb/usbip/stub.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifndef __USBIP_STUB_H +#define __USBIP_STUB_H + +#include +#include +#include +#include +#include +#include + +#define STUB_BUSID_OTHER 0 +#define STUB_BUSID_REMOV 1 +#define STUB_BUSID_ADDED 2 +#define STUB_BUSID_ALLOC 3 + +struct stub_device { + struct usb_interface *interface; + struct usb_device *udev; + + struct usbip_device ud; + __u32 devid; + + /* + * stub_priv preserves private data of each urb. + * It is allocated as stub_priv_cache and assigned to urb->context. + * + * stub_priv is always linked to any one of 3 lists; + * priv_init: linked to this until the comletion of a urb. + * priv_tx : linked to this after the completion of a urb. + * priv_free: linked to this after the sending of the result. + * + * Any of these list operations should be locked by priv_lock. + */ + spinlock_t priv_lock; + struct list_head priv_init; + struct list_head priv_tx; + struct list_head priv_free; + + /* see comments for unlinking in stub_rx.c */ + struct list_head unlink_tx; + struct list_head unlink_free; + + wait_queue_head_t tx_waitq; +}; + +/* private data into urb->priv */ +struct stub_priv { + unsigned long seqnum; + struct list_head list; + struct stub_device *sdev; + struct urb *urb; + + int unlinking; +}; + +struct stub_unlink { + unsigned long seqnum; + struct list_head list; + __u32 status; +}; + +/* same as SYSFS_BUS_ID_SIZE */ +#define BUSID_SIZE 32 + +struct bus_id_priv { + char name[BUSID_SIZE]; + char status; + int interf_count; + struct stub_device *sdev; + struct usb_device *udev; + char shutdown_busid; +}; + +/* stub_priv is allocated from stub_priv_cache */ +extern struct kmem_cache *stub_priv_cache; + +/* stub_dev.c */ +extern struct usb_device_driver stub_driver; + +/* stub_main.c */ +struct bus_id_priv *get_busid_priv(const char *busid); +int del_match_busid(char *busid); +void stub_device_cleanup_urbs(struct stub_device *sdev); + +/* stub_rx.c */ +int stub_rx_loop(void *data); + +/* stub_tx.c */ +void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum, + __u32 status); +void stub_complete(struct urb *urb); +int stub_tx_loop(void *data); + +#endif /* __USBIP_STUB_H */ diff --git a/kernel/drivers/usb/usbip/stub_dev.c b/kernel/drivers/usb/usbip/stub_dev.c new file mode 100644 index 000000000..a3ec49bdc --- /dev/null +++ b/kernel/drivers/usb/usbip/stub_dev.c @@ -0,0 +1,502 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#include + +#include "usbip_common.h" +#include "stub.h" + +/* + * usbip_status shows the status of usbip-host as long as this driver is bound + * to the target device. + */ +static ssize_t usbip_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stub_device *sdev = dev_get_drvdata(dev); + int status; + + if (!sdev) { + dev_err(dev, "sdev is null\n"); + return -ENODEV; + } + + spin_lock_irq(&sdev->ud.lock); + status = sdev->ud.status; + spin_unlock_irq(&sdev->ud.lock); + + return snprintf(buf, PAGE_SIZE, "%d\n", status); +} +static DEVICE_ATTR_RO(usbip_status); + +/* + * usbip_sockfd gets a socket descriptor of an established TCP connection that + * is used to transfer usbip requests by kernel threads. -1 is a magic number + * by which usbip connection is finished. + */ +static ssize_t store_sockfd(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct stub_device *sdev = dev_get_drvdata(dev); + int sockfd = 0; + struct socket *socket; + int rv; + + if (!sdev) { + dev_err(dev, "sdev is null\n"); + return -ENODEV; + } + + rv = sscanf(buf, "%d", &sockfd); + if (rv != 1) + return -EINVAL; + + if (sockfd != -1) { + int err; + + dev_info(dev, "stub up\n"); + + spin_lock_irq(&sdev->ud.lock); + + if (sdev->ud.status != SDEV_ST_AVAILABLE) { + dev_err(dev, "not ready\n"); + goto err; + } + + socket = sockfd_lookup(sockfd, &err); + if (!socket) + goto err; + + sdev->ud.tcp_socket = socket; + + spin_unlock_irq(&sdev->ud.lock); + + sdev->ud.tcp_rx = kthread_get_run(stub_rx_loop, &sdev->ud, + "stub_rx"); + sdev->ud.tcp_tx = kthread_get_run(stub_tx_loop, &sdev->ud, + "stub_tx"); + + spin_lock_irq(&sdev->ud.lock); + sdev->ud.status = SDEV_ST_USED; + spin_unlock_irq(&sdev->ud.lock); + + } else { + dev_info(dev, "stub down\n"); + + spin_lock_irq(&sdev->ud.lock); + if (sdev->ud.status != SDEV_ST_USED) + goto err; + + spin_unlock_irq(&sdev->ud.lock); + + usbip_event_add(&sdev->ud, SDEV_EVENT_DOWN); + } + + return count; + +err: + spin_unlock_irq(&sdev->ud.lock); + return -EINVAL; +} +static DEVICE_ATTR(usbip_sockfd, S_IWUSR, NULL, store_sockfd); + +static int stub_add_files(struct device *dev) +{ + int err = 0; + + err = device_create_file(dev, &dev_attr_usbip_status); + if (err) + goto err_status; + + err = device_create_file(dev, &dev_attr_usbip_sockfd); + if (err) + goto err_sockfd; + + err = device_create_file(dev, &dev_attr_usbip_debug); + if (err) + goto err_debug; + + return 0; + +err_debug: + device_remove_file(dev, &dev_attr_usbip_sockfd); +err_sockfd: + device_remove_file(dev, &dev_attr_usbip_status); +err_status: + return err; +} + +static void stub_remove_files(struct device *dev) +{ + device_remove_file(dev, &dev_attr_usbip_status); + device_remove_file(dev, &dev_attr_usbip_sockfd); + device_remove_file(dev, &dev_attr_usbip_debug); +} + +static void stub_shutdown_connection(struct usbip_device *ud) +{ + struct stub_device *sdev = container_of(ud, struct stub_device, ud); + + /* + * When removing an exported device, kernel panic sometimes occurred + * and then EIP was sk_wait_data of stub_rx thread. Is this because + * sk_wait_data returned though stub_rx thread was already finished by + * step 1? + */ + if (ud->tcp_socket) { + dev_dbg(&sdev->udev->dev, "shutdown tcp_socket %p\n", + ud->tcp_socket); + kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); + } + + /* 1. stop threads */ + if (ud->tcp_rx) { + kthread_stop_put(ud->tcp_rx); + ud->tcp_rx = NULL; + } + if (ud->tcp_tx) { + kthread_stop_put(ud->tcp_tx); + ud->tcp_tx = NULL; + } + + /* + * 2. close the socket + * + * tcp_socket is freed after threads are killed so that usbip_xmit does + * not touch NULL socket. + */ + if (ud->tcp_socket) { + sockfd_put(ud->tcp_socket); + ud->tcp_socket = NULL; + } + + /* 3. free used data */ + stub_device_cleanup_urbs(sdev); + + /* 4. free stub_unlink */ + { + unsigned long flags; + struct stub_unlink *unlink, *tmp; + + spin_lock_irqsave(&sdev->priv_lock, flags); + list_for_each_entry_safe(unlink, tmp, &sdev->unlink_tx, list) { + list_del(&unlink->list); + kfree(unlink); + } + list_for_each_entry_safe(unlink, tmp, &sdev->unlink_free, + list) { + list_del(&unlink->list); + kfree(unlink); + } + spin_unlock_irqrestore(&sdev->priv_lock, flags); + } +} + +static void stub_device_reset(struct usbip_device *ud) +{ + struct stub_device *sdev = container_of(ud, struct stub_device, ud); + struct usb_device *udev = sdev->udev; + int ret; + + dev_dbg(&udev->dev, "device reset"); + + ret = usb_lock_device_for_reset(udev, sdev->interface); + if (ret < 0) { + dev_err(&udev->dev, "lock for reset\n"); + spin_lock_irq(&ud->lock); + ud->status = SDEV_ST_ERROR; + spin_unlock_irq(&ud->lock); + return; + } + + /* try to reset the device */ + ret = usb_reset_device(udev); + usb_unlock_device(udev); + + spin_lock_irq(&ud->lock); + if (ret) { + dev_err(&udev->dev, "device reset\n"); + ud->status = SDEV_ST_ERROR; + } else { + dev_info(&udev->dev, "device reset\n"); + ud->status = SDEV_ST_AVAILABLE; + } + spin_unlock_irq(&ud->lock); +} + +static void stub_device_unusable(struct usbip_device *ud) +{ + spin_lock_irq(&ud->lock); + ud->status = SDEV_ST_ERROR; + spin_unlock_irq(&ud->lock); +} + +/** + * stub_device_alloc - allocate a new stub_device struct + * @interface: usb_interface of a new device + * + * Allocates and initializes a new stub_device struct. + */ +static struct stub_device *stub_device_alloc(struct usb_device *udev) +{ + struct stub_device *sdev; + int busnum = udev->bus->busnum; + int devnum = udev->devnum; + + dev_dbg(&udev->dev, "allocating stub device"); + + /* yes, it's a new device */ + sdev = kzalloc(sizeof(struct stub_device), GFP_KERNEL); + if (!sdev) + return NULL; + + sdev->udev = usb_get_dev(udev); + + /* + * devid is defined with devnum when this driver is first allocated. + * devnum may change later if a device is reset. However, devid never + * changes during a usbip connection. + */ + sdev->devid = (busnum << 16) | devnum; + sdev->ud.side = USBIP_STUB; + sdev->ud.status = SDEV_ST_AVAILABLE; + spin_lock_init(&sdev->ud.lock); + sdev->ud.tcp_socket = NULL; + + INIT_LIST_HEAD(&sdev->priv_init); + INIT_LIST_HEAD(&sdev->priv_tx); + INIT_LIST_HEAD(&sdev->priv_free); + INIT_LIST_HEAD(&sdev->unlink_free); + INIT_LIST_HEAD(&sdev->unlink_tx); + spin_lock_init(&sdev->priv_lock); + + init_waitqueue_head(&sdev->tx_waitq); + + sdev->ud.eh_ops.shutdown = stub_shutdown_connection; + sdev->ud.eh_ops.reset = stub_device_reset; + sdev->ud.eh_ops.unusable = stub_device_unusable; + + usbip_start_eh(&sdev->ud); + + dev_dbg(&udev->dev, "register new device\n"); + + return sdev; +} + +static void stub_device_free(struct stub_device *sdev) +{ + kfree(sdev); +} + +static int stub_probe(struct usb_device *udev) +{ + struct stub_device *sdev = NULL; + const char *udev_busid = dev_name(&udev->dev); + struct bus_id_priv *busid_priv; + int rc; + + dev_dbg(&udev->dev, "Enter\n"); + + /* check we should claim or not by busid_table */ + busid_priv = get_busid_priv(udev_busid); + if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) || + (busid_priv->status == STUB_BUSID_OTHER)) { + dev_info(&udev->dev, + "%s is not in match_busid table... skip!\n", + udev_busid); + + /* + * Return value should be ENODEV or ENOXIO to continue trying + * other matched drivers by the driver core. + * See driver_probe_device() in driver/base/dd.c + */ + return -ENODEV; + } + + if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) { + dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n", + udev_busid); + return -ENODEV; + } + + if (!strcmp(udev->bus->bus_name, "vhci_hcd")) { + dev_dbg(&udev->dev, + "%s is attached on vhci_hcd... skip!\n", + udev_busid); + + return -ENODEV; + } + + /* ok, this is my device */ + sdev = stub_device_alloc(udev); + if (!sdev) + return -ENOMEM; + + dev_info(&udev->dev, + "usbip-host: register new device (bus %u dev %u)\n", + udev->bus->busnum, udev->devnum); + + busid_priv->shutdown_busid = 0; + + /* set private data to usb_device */ + dev_set_drvdata(&udev->dev, sdev); + busid_priv->sdev = sdev; + busid_priv->udev = udev; + + /* + * Claim this hub port. + * It doesn't matter what value we pass as owner + * (struct dev_state) as long as it is unique. + */ + rc = usb_hub_claim_port(udev->parent, udev->portnum, + (struct usb_dev_state *) udev); + if (rc) { + dev_dbg(&udev->dev, "unable to claim port\n"); + goto err_port; + } + + rc = stub_add_files(&udev->dev); + if (rc) { + dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid); + goto err_files; + } + busid_priv->status = STUB_BUSID_ALLOC; + + return 0; +err_files: + usb_hub_release_port(udev->parent, udev->portnum, + (struct usb_dev_state *) udev); +err_port: + dev_set_drvdata(&udev->dev, NULL); + usb_put_dev(udev); + kthread_stop_put(sdev->ud.eh); + + busid_priv->sdev = NULL; + stub_device_free(sdev); + return rc; +} + +static void shutdown_busid(struct bus_id_priv *busid_priv) +{ + if (busid_priv->sdev && !busid_priv->shutdown_busid) { + busid_priv->shutdown_busid = 1; + usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED); + + /* wait for the stop of the event handler */ + usbip_stop_eh(&busid_priv->sdev->ud); + } +} + +/* + * called in usb_disconnect() or usb_deregister() + * but only if actconfig(active configuration) exists + */ +static void stub_disconnect(struct usb_device *udev) +{ + struct stub_device *sdev; + const char *udev_busid = dev_name(&udev->dev); + struct bus_id_priv *busid_priv; + int rc; + + dev_dbg(&udev->dev, "Enter\n"); + + busid_priv = get_busid_priv(udev_busid); + if (!busid_priv) { + BUG(); + return; + } + + sdev = dev_get_drvdata(&udev->dev); + + /* get stub_device */ + if (!sdev) { + dev_err(&udev->dev, "could not get device"); + return; + } + + dev_set_drvdata(&udev->dev, NULL); + + /* + * NOTE: rx/tx threads are invoked for each usb_device. + */ + stub_remove_files(&udev->dev); + + /* release port */ + rc = usb_hub_release_port(udev->parent, udev->portnum, + (struct usb_dev_state *) udev); + if (rc) { + dev_dbg(&udev->dev, "unable to release port\n"); + return; + } + + /* If usb reset is called from event handler */ + if (busid_priv->sdev->ud.eh == current) + return; + + /* shutdown the current connection */ + shutdown_busid(busid_priv); + + usb_put_dev(sdev->udev); + + /* free sdev */ + busid_priv->sdev = NULL; + stub_device_free(sdev); + + if (busid_priv->status == STUB_BUSID_ALLOC) { + busid_priv->status = STUB_BUSID_ADDED; + } else { + busid_priv->status = STUB_BUSID_OTHER; + del_match_busid((char *)udev_busid); + } +} + +#ifdef CONFIG_PM + +/* These functions need usb_port_suspend and usb_port_resume, + * which reside in drivers/usb/core/usb.h. Skip for now. */ + +static int stub_suspend(struct usb_device *udev, pm_message_t message) +{ + dev_dbg(&udev->dev, "stub_suspend\n"); + + return 0; +} + +static int stub_resume(struct usb_device *udev, pm_message_t message) +{ + dev_dbg(&udev->dev, "stub_resume\n"); + + return 0; +} + +#endif /* CONFIG_PM */ + +struct usb_device_driver stub_driver = { + .name = "usbip-host", + .probe = stub_probe, + .disconnect = stub_disconnect, +#ifdef CONFIG_PM + .suspend = stub_suspend, + .resume = stub_resume, +#endif + .supports_autosuspend = 0, +}; diff --git a/kernel/drivers/usb/usbip/stub_main.c b/kernel/drivers/usb/usbip/stub_main.c new file mode 100644 index 000000000..44ab43fc4 --- /dev/null +++ b/kernel/drivers/usb/usbip/stub_main.c @@ -0,0 +1,335 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include + +#include "usbip_common.h" +#include "stub.h" + +#define DRIVER_AUTHOR "Takahiro Hirofuchi" +#define DRIVER_DESC "USB/IP Host Driver" + +struct kmem_cache *stub_priv_cache; +/* + * busid_tables defines matching busids that usbip can grab. A user can change + * dynamically what device is locally used and what device is exported to a + * remote host. + */ +#define MAX_BUSID 16 +static struct bus_id_priv busid_table[MAX_BUSID]; +static spinlock_t busid_table_lock; + +static void init_busid_table(void) +{ + /* + * This also sets the bus_table[i].status to + * STUB_BUSID_OTHER, which is 0. + */ + memset(busid_table, 0, sizeof(busid_table)); + + spin_lock_init(&busid_table_lock); +} + +/* + * Find the index of the busid by name. + * Must be called with busid_table_lock held. + */ +static int get_busid_idx(const char *busid) +{ + int i; + int idx = -1; + + for (i = 0; i < MAX_BUSID; i++) + if (busid_table[i].name[0]) + if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) { + idx = i; + break; + } + return idx; +} + +struct bus_id_priv *get_busid_priv(const char *busid) +{ + int idx; + struct bus_id_priv *bid = NULL; + + spin_lock(&busid_table_lock); + idx = get_busid_idx(busid); + if (idx >= 0) + bid = &(busid_table[idx]); + spin_unlock(&busid_table_lock); + + return bid; +} + +static int add_match_busid(char *busid) +{ + int i; + int ret = -1; + + spin_lock(&busid_table_lock); + /* already registered? */ + if (get_busid_idx(busid) >= 0) { + ret = 0; + goto out; + } + + for (i = 0; i < MAX_BUSID; i++) + if (!busid_table[i].name[0]) { + strlcpy(busid_table[i].name, busid, BUSID_SIZE); + if ((busid_table[i].status != STUB_BUSID_ALLOC) && + (busid_table[i].status != STUB_BUSID_REMOV)) + busid_table[i].status = STUB_BUSID_ADDED; + ret = 0; + break; + } + +out: + spin_unlock(&busid_table_lock); + + return ret; +} + +int del_match_busid(char *busid) +{ + int idx; + int ret = -1; + + spin_lock(&busid_table_lock); + idx = get_busid_idx(busid); + if (idx < 0) + goto out; + + /* found */ + ret = 0; + + if (busid_table[idx].status == STUB_BUSID_OTHER) + memset(busid_table[idx].name, 0, BUSID_SIZE); + + if ((busid_table[idx].status != STUB_BUSID_OTHER) && + (busid_table[idx].status != STUB_BUSID_ADDED)) + busid_table[idx].status = STUB_BUSID_REMOV; + +out: + spin_unlock(&busid_table_lock); + + return ret; +} + +static ssize_t show_match_busid(struct device_driver *drv, char *buf) +{ + int i; + char *out = buf; + + spin_lock(&busid_table_lock); + for (i = 0; i < MAX_BUSID; i++) + if (busid_table[i].name[0]) + out += sprintf(out, "%s ", busid_table[i].name); + spin_unlock(&busid_table_lock); + out += sprintf(out, "\n"); + + return out - buf; +} + +static ssize_t store_match_busid(struct device_driver *dev, const char *buf, + size_t count) +{ + int len; + char busid[BUSID_SIZE]; + + if (count < 5) + return -EINVAL; + + /* busid needs to include \0 termination */ + len = strlcpy(busid, buf + 4, BUSID_SIZE); + if (sizeof(busid) <= len) + return -EINVAL; + + if (!strncmp(buf, "add ", 4)) { + if (add_match_busid(busid) < 0) + return -ENOMEM; + + pr_debug("add busid %s\n", busid); + return count; + } + + if (!strncmp(buf, "del ", 4)) { + if (del_match_busid(busid) < 0) + return -ENODEV; + + pr_debug("del busid %s\n", busid); + return count; + } + + return -EINVAL; +} +static DRIVER_ATTR(match_busid, S_IRUSR | S_IWUSR, show_match_busid, + store_match_busid); + +static ssize_t rebind_store(struct device_driver *dev, const char *buf, + size_t count) +{ + int ret; + int len; + struct bus_id_priv *bid; + + /* buf length should be less that BUSID_SIZE */ + len = strnlen(buf, BUSID_SIZE); + + if (!(len < BUSID_SIZE)) + return -EINVAL; + + bid = get_busid_priv(buf); + if (!bid) + return -ENODEV; + + ret = device_attach(&bid->udev->dev); + if (ret < 0) { + dev_err(&bid->udev->dev, "rebind failed\n"); + return ret; + } + + return count; +} + +static DRIVER_ATTR_WO(rebind); + +static struct stub_priv *stub_priv_pop_from_listhead(struct list_head *listhead) +{ + struct stub_priv *priv, *tmp; + + list_for_each_entry_safe(priv, tmp, listhead, list) { + list_del(&priv->list); + return priv; + } + + return NULL; +} + +static struct stub_priv *stub_priv_pop(struct stub_device *sdev) +{ + unsigned long flags; + struct stub_priv *priv; + + spin_lock_irqsave(&sdev->priv_lock, flags); + + priv = stub_priv_pop_from_listhead(&sdev->priv_init); + if (priv) + goto done; + + priv = stub_priv_pop_from_listhead(&sdev->priv_tx); + if (priv) + goto done; + + priv = stub_priv_pop_from_listhead(&sdev->priv_free); + +done: + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return priv; +} + +void stub_device_cleanup_urbs(struct stub_device *sdev) +{ + struct stub_priv *priv; + struct urb *urb; + + dev_dbg(&sdev->udev->dev, "free sdev %p\n", sdev); + + while ((priv = stub_priv_pop(sdev))) { + urb = priv->urb; + dev_dbg(&sdev->udev->dev, "free urb %p\n", urb); + usb_kill_urb(urb); + + kmem_cache_free(stub_priv_cache, priv); + + kfree(urb->transfer_buffer); + kfree(urb->setup_packet); + usb_free_urb(urb); + } +} + +static int __init usbip_host_init(void) +{ + int ret; + + init_busid_table(); + + stub_priv_cache = KMEM_CACHE(stub_priv, SLAB_HWCACHE_ALIGN); + if (!stub_priv_cache) { + pr_err("kmem_cache_create failed\n"); + return -ENOMEM; + } + + ret = usb_register_device_driver(&stub_driver, THIS_MODULE); + if (ret) { + pr_err("usb_register failed %d\n", ret); + goto err_usb_register; + } + + ret = driver_create_file(&stub_driver.drvwrap.driver, + &driver_attr_match_busid); + if (ret) { + pr_err("driver_create_file failed\n"); + goto err_create_file; + } + + ret = driver_create_file(&stub_driver.drvwrap.driver, + &driver_attr_rebind); + if (ret) { + pr_err("driver_create_file failed\n"); + goto err_create_file; + } + + pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); + return ret; + +err_create_file: + usb_deregister_device_driver(&stub_driver); +err_usb_register: + kmem_cache_destroy(stub_priv_cache); + return ret; +} + +static void __exit usbip_host_exit(void) +{ + driver_remove_file(&stub_driver.drvwrap.driver, + &driver_attr_match_busid); + + driver_remove_file(&stub_driver.drvwrap.driver, + &driver_attr_rebind); + + /* + * deregister() calls stub_disconnect() for all devices. Device + * specific data is cleared in stub_disconnect(). + */ + usb_deregister_device_driver(&stub_driver); + + kmem_cache_destroy(stub_priv_cache); +} + +module_init(usbip_host_init); +module_exit(usbip_host_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(USBIP_VERSION); diff --git a/kernel/drivers/usb/usbip/stub_rx.c b/kernel/drivers/usb/usbip/stub_rx.c new file mode 100644 index 000000000..00e475c51 --- /dev/null +++ b/kernel/drivers/usb/usbip/stub_rx.c @@ -0,0 +1,594 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#include + +#include "usbip_common.h" +#include "stub.h" + +static int is_clear_halt_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + + return (req->bRequest == USB_REQ_CLEAR_FEATURE) && + (req->bRequestType == USB_RECIP_ENDPOINT) && + (req->wValue == USB_ENDPOINT_HALT); +} + +static int is_set_interface_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + + return (req->bRequest == USB_REQ_SET_INTERFACE) && + (req->bRequestType == USB_RECIP_INTERFACE); +} + +static int is_set_configuration_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + + return (req->bRequest == USB_REQ_SET_CONFIGURATION) && + (req->bRequestType == USB_RECIP_DEVICE); +} + +static int is_reset_device_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + __u16 value; + __u16 index; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + value = le16_to_cpu(req->wValue); + index = le16_to_cpu(req->wIndex); + + if ((req->bRequest == USB_REQ_SET_FEATURE) && + (req->bRequestType == USB_RT_PORT) && + (value == USB_PORT_FEAT_RESET)) { + usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index); + return 1; + } else + return 0; +} + +static int tweak_clear_halt_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + int target_endp; + int target_dir; + int target_pipe; + int ret; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + + /* + * The stalled endpoint is specified in the wIndex value. The endpoint + * of the urb is the target of this clear_halt request (i.e., control + * endpoint). + */ + target_endp = le16_to_cpu(req->wIndex) & 0x000f; + + /* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80. */ + target_dir = le16_to_cpu(req->wIndex) & 0x0080; + + if (target_dir) + target_pipe = usb_rcvctrlpipe(urb->dev, target_endp); + else + target_pipe = usb_sndctrlpipe(urb->dev, target_endp); + + ret = usb_clear_halt(urb->dev, target_pipe); + if (ret < 0) + dev_err(&urb->dev->dev, + "usb_clear_halt error: devnum %d endp %d ret %d\n", + urb->dev->devnum, target_endp, ret); + else + dev_info(&urb->dev->dev, + "usb_clear_halt done: devnum %d endp %d\n", + urb->dev->devnum, target_endp); + + return ret; +} + +static int tweak_set_interface_cmd(struct urb *urb) +{ + struct usb_ctrlrequest *req; + __u16 alternate; + __u16 interface; + int ret; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + alternate = le16_to_cpu(req->wValue); + interface = le16_to_cpu(req->wIndex); + + usbip_dbg_stub_rx("set_interface: inf %u alt %u\n", + interface, alternate); + + ret = usb_set_interface(urb->dev, interface, alternate); + if (ret < 0) + dev_err(&urb->dev->dev, + "usb_set_interface error: inf %u alt %u ret %d\n", + interface, alternate, ret); + else + dev_info(&urb->dev->dev, + "usb_set_interface done: inf %u alt %u\n", + interface, alternate); + + return ret; +} + +static int tweak_set_configuration_cmd(struct urb *urb) +{ + struct stub_priv *priv = (struct stub_priv *) urb->context; + struct stub_device *sdev = priv->sdev; + struct usb_ctrlrequest *req; + __u16 config; + int err; + + req = (struct usb_ctrlrequest *) urb->setup_packet; + config = le16_to_cpu(req->wValue); + + err = usb_set_configuration(sdev->udev, config); + if (err && err != -ENODEV) + dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n", + config, err); + return 0; +} + +static int tweak_reset_device_cmd(struct urb *urb) +{ + struct stub_priv *priv = (struct stub_priv *) urb->context; + struct stub_device *sdev = priv->sdev; + + dev_info(&urb->dev->dev, "usb_queue_reset_device\n"); + + /* + * With the implementation of pre_reset and post_reset the driver no + * longer unbinds. This allows the use of synchronous reset. + */ + + if (usb_lock_device_for_reset(sdev->udev, sdev->interface) < 0) { + dev_err(&urb->dev->dev, "could not obtain lock to reset device\n"); + return 0; + } + usb_reset_device(sdev->udev); + usb_unlock_device(sdev->udev); + + return 0; +} + +/* + * clear_halt, set_interface, and set_configuration require special tricks. + */ +static void tweak_special_requests(struct urb *urb) +{ + if (!urb || !urb->setup_packet) + return; + + if (usb_pipetype(urb->pipe) != PIPE_CONTROL) + return; + + if (is_clear_halt_cmd(urb)) + /* tweak clear_halt */ + tweak_clear_halt_cmd(urb); + + else if (is_set_interface_cmd(urb)) + /* tweak set_interface */ + tweak_set_interface_cmd(urb); + + else if (is_set_configuration_cmd(urb)) + /* tweak set_configuration */ + tweak_set_configuration_cmd(urb); + + else if (is_reset_device_cmd(urb)) + tweak_reset_device_cmd(urb); + else + usbip_dbg_stub_rx("no need to tweak\n"); +} + +/* + * stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb(). + * By unlinking the urb asynchronously, stub_rx can continuously + * process coming urbs. Even if the urb is unlinked, its completion + * handler will be called and stub_tx will send a return pdu. + * + * See also comments about unlinking strategy in vhci_hcd.c. + */ +static int stub_recv_cmd_unlink(struct stub_device *sdev, + struct usbip_header *pdu) +{ + int ret; + unsigned long flags; + struct stub_priv *priv; + + spin_lock_irqsave(&sdev->priv_lock, flags); + + list_for_each_entry(priv, &sdev->priv_init, list) { + if (priv->seqnum != pdu->u.cmd_unlink.seqnum) + continue; + + dev_info(&priv->urb->dev->dev, "unlink urb %p\n", + priv->urb); + + /* + * This matched urb is not completed yet (i.e., be in + * flight in usb hcd hardware/driver). Now we are + * cancelling it. The unlinking flag means that we are + * now not going to return the normal result pdu of a + * submission request, but going to return a result pdu + * of the unlink request. + */ + priv->unlinking = 1; + + /* + * In the case that unlinking flag is on, prev->seqnum + * is changed from the seqnum of the cancelling urb to + * the seqnum of the unlink request. This will be used + * to make the result pdu of the unlink request. + */ + priv->seqnum = pdu->base.seqnum; + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + /* + * usb_unlink_urb() is now out of spinlocking to avoid + * spinlock recursion since stub_complete() is + * sometimes called in this context but not in the + * interrupt context. If stub_complete() is executed + * before we call usb_unlink_urb(), usb_unlink_urb() + * will return an error value. In this case, stub_tx + * will return the result pdu of this unlink request + * though submission is completed and actual unlinking + * is not executed. OK? + */ + /* In the above case, urb->status is not -ECONNRESET, + * so a driver in a client host will know the failure + * of the unlink request ? + */ + ret = usb_unlink_urb(priv->urb); + if (ret != -EINPROGRESS) + dev_err(&priv->urb->dev->dev, + "failed to unlink a urb %p, ret %d\n", + priv->urb, ret); + + return 0; + } + + usbip_dbg_stub_rx("seqnum %d is not pending\n", + pdu->u.cmd_unlink.seqnum); + + /* + * The urb of the unlink target is not found in priv_init queue. It was + * already completed and its results is/was going to be sent by a + * CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only + * return the completeness of this unlink request to vhci_hcd. + */ + stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0); + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return 0; +} + +static int valid_request(struct stub_device *sdev, struct usbip_header *pdu) +{ + struct usbip_device *ud = &sdev->ud; + int valid = 0; + + if (pdu->base.devid == sdev->devid) { + spin_lock_irq(&ud->lock); + if (ud->status == SDEV_ST_USED) { + /* A request is valid. */ + valid = 1; + } + spin_unlock_irq(&ud->lock); + } + + return valid; +} + +static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, + struct usbip_header *pdu) +{ + struct stub_priv *priv; + struct usbip_device *ud = &sdev->ud; + unsigned long flags; + + spin_lock_irqsave(&sdev->priv_lock, flags); + + priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC); + if (!priv) { + dev_err(&sdev->interface->dev, "alloc stub_priv\n"); + spin_unlock_irqrestore(&sdev->priv_lock, flags); + usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); + return NULL; + } + + priv->seqnum = pdu->base.seqnum; + priv->sdev = sdev; + + /* + * After a stub_priv is linked to a list_head, + * our error handler can free allocated data. + */ + list_add_tail(&priv->list, &sdev->priv_init); + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return priv; +} + +static int get_pipe(struct stub_device *sdev, int epnum, int dir) +{ + struct usb_device *udev = sdev->udev; + struct usb_host_endpoint *ep; + struct usb_endpoint_descriptor *epd = NULL; + + if (dir == USBIP_DIR_IN) + ep = udev->ep_in[epnum & 0x7f]; + else + ep = udev->ep_out[epnum & 0x7f]; + if (!ep) { + dev_err(&sdev->interface->dev, "no such endpoint?, %d\n", + epnum); + BUG(); + } + + epd = &ep->desc; + if (usb_endpoint_xfer_control(epd)) { + if (dir == USBIP_DIR_OUT) + return usb_sndctrlpipe(udev, epnum); + else + return usb_rcvctrlpipe(udev, epnum); + } + + if (usb_endpoint_xfer_bulk(epd)) { + if (dir == USBIP_DIR_OUT) + return usb_sndbulkpipe(udev, epnum); + else + return usb_rcvbulkpipe(udev, epnum); + } + + if (usb_endpoint_xfer_int(epd)) { + if (dir == USBIP_DIR_OUT) + return usb_sndintpipe(udev, epnum); + else + return usb_rcvintpipe(udev, epnum); + } + + if (usb_endpoint_xfer_isoc(epd)) { + if (dir == USBIP_DIR_OUT) + return usb_sndisocpipe(udev, epnum); + else + return usb_rcvisocpipe(udev, epnum); + } + + /* NOT REACHED */ + dev_err(&sdev->interface->dev, "get pipe, epnum %d\n", epnum); + return 0; +} + +static void masking_bogus_flags(struct urb *urb) +{ + int xfertype; + struct usb_device *dev; + struct usb_host_endpoint *ep; + int is_out; + unsigned int allowed; + + if (!urb || urb->hcpriv || !urb->complete) + return; + dev = urb->dev; + if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED)) + return; + + ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out) + [usb_pipeendpoint(urb->pipe)]; + if (!ep) + return; + + xfertype = usb_endpoint_type(&ep->desc); + if (xfertype == USB_ENDPOINT_XFER_CONTROL) { + struct usb_ctrlrequest *setup = + (struct usb_ctrlrequest *) urb->setup_packet; + + if (!setup) + return; + is_out = !(setup->bRequestType & USB_DIR_IN) || + !setup->wLength; + } else { + is_out = usb_endpoint_dir_out(&ep->desc); + } + + /* enforce simple/standard policy */ + allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | + URB_DIR_MASK | URB_FREE_BUFFER); + switch (xfertype) { + case USB_ENDPOINT_XFER_BULK: + if (is_out) + allowed |= URB_ZERO_PACKET; + /* FALLTHROUGH */ + case USB_ENDPOINT_XFER_CONTROL: + allowed |= URB_NO_FSBR; /* only affects UHCI */ + /* FALLTHROUGH */ + default: /* all non-iso endpoints */ + if (!is_out) + allowed |= URB_SHORT_NOT_OK; + break; + case USB_ENDPOINT_XFER_ISOC: + allowed |= URB_ISO_ASAP; + break; + } + urb->transfer_flags &= allowed; +} + +static void stub_recv_cmd_submit(struct stub_device *sdev, + struct usbip_header *pdu) +{ + int ret; + struct stub_priv *priv; + struct usbip_device *ud = &sdev->ud; + struct usb_device *udev = sdev->udev; + int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); + + priv = stub_priv_alloc(sdev, pdu); + if (!priv) + return; + + /* setup a urb */ + if (usb_pipeisoc(pipe)) + priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets, + GFP_KERNEL); + else + priv->urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!priv->urb) { + dev_err(&sdev->interface->dev, "malloc urb\n"); + usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); + return; + } + + /* allocate urb transfer buffer, if needed */ + if (pdu->u.cmd_submit.transfer_buffer_length > 0) { + priv->urb->transfer_buffer = + kzalloc(pdu->u.cmd_submit.transfer_buffer_length, + GFP_KERNEL); + if (!priv->urb->transfer_buffer) { + usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); + return; + } + } + + /* copy urb setup packet */ + priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8, + GFP_KERNEL); + if (!priv->urb->setup_packet) { + dev_err(&sdev->interface->dev, "allocate setup_packet\n"); + usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); + return; + } + + /* set other members from the base header of pdu */ + priv->urb->context = (void *) priv; + priv->urb->dev = udev; + priv->urb->pipe = pipe; + priv->urb->complete = stub_complete; + + usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0); + + + if (usbip_recv_xbuff(ud, priv->urb) < 0) + return; + + if (usbip_recv_iso(ud, priv->urb) < 0) + return; + + /* no need to submit an intercepted request, but harmless? */ + tweak_special_requests(priv->urb); + + masking_bogus_flags(priv->urb); + /* urb is now ready to submit */ + ret = usb_submit_urb(priv->urb, GFP_KERNEL); + + if (ret == 0) + usbip_dbg_stub_rx("submit urb ok, seqnum %u\n", + pdu->base.seqnum); + else { + dev_err(&sdev->interface->dev, "submit_urb error, %d\n", ret); + usbip_dump_header(pdu); + usbip_dump_urb(priv->urb); + + /* + * Pessimistic. + * This connection will be discarded. + */ + usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT); + } + + usbip_dbg_stub_rx("Leave\n"); +} + +/* recv a pdu */ +static void stub_rx_pdu(struct usbip_device *ud) +{ + int ret; + struct usbip_header pdu; + struct stub_device *sdev = container_of(ud, struct stub_device, ud); + struct device *dev = &sdev->udev->dev; + + usbip_dbg_stub_rx("Enter\n"); + + memset(&pdu, 0, sizeof(pdu)); + + /* receive a pdu header */ + ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu)); + if (ret != sizeof(pdu)) { + dev_err(dev, "recv a header, %d\n", ret); + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + return; + } + + usbip_header_correct_endian(&pdu, 0); + + if (usbip_dbg_flag_stub_rx) + usbip_dump_header(&pdu); + + if (!valid_request(sdev, &pdu)) { + dev_err(dev, "recv invalid request\n"); + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + return; + } + + switch (pdu.base.command) { + case USBIP_CMD_UNLINK: + stub_recv_cmd_unlink(sdev, &pdu); + break; + + case USBIP_CMD_SUBMIT: + stub_recv_cmd_submit(sdev, &pdu); + break; + + default: + /* NOTREACHED */ + dev_err(dev, "unknown pdu\n"); + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + break; + } +} + +int stub_rx_loop(void *data) +{ + struct usbip_device *ud = data; + + while (!kthread_should_stop()) { + if (usbip_event_happened(ud)) + break; + + stub_rx_pdu(ud); + } + + return 0; +} diff --git a/kernel/drivers/usb/usbip/stub_tx.c b/kernel/drivers/usb/usbip/stub_tx.c new file mode 100644 index 000000000..dbcabc9db --- /dev/null +++ b/kernel/drivers/usb/usbip/stub_tx.c @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +#include "usbip_common.h" +#include "stub.h" + +static void stub_free_priv_and_urb(struct stub_priv *priv) +{ + struct urb *urb = priv->urb; + + kfree(urb->setup_packet); + kfree(urb->transfer_buffer); + list_del(&priv->list); + kmem_cache_free(stub_priv_cache, priv); + usb_free_urb(urb); +} + +/* be in spin_lock_irqsave(&sdev->priv_lock, flags) */ +void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum, + __u32 status) +{ + struct stub_unlink *unlink; + + unlink = kzalloc(sizeof(struct stub_unlink), GFP_ATOMIC); + if (!unlink) { + usbip_event_add(&sdev->ud, VDEV_EVENT_ERROR_MALLOC); + return; + } + + unlink->seqnum = seqnum; + unlink->status = status; + + list_add_tail(&unlink->list, &sdev->unlink_tx); +} + +/** + * stub_complete - completion handler of a usbip urb + * @urb: pointer to the urb completed + * + * When a urb has completed, the USB core driver calls this function mostly in + * the interrupt context. To return the result of a urb, the completed urb is + * linked to the pending list of returning. + * + */ +void stub_complete(struct urb *urb) +{ + struct stub_priv *priv = (struct stub_priv *) urb->context; + struct stub_device *sdev = priv->sdev; + unsigned long flags; + + usbip_dbg_stub_tx("complete! status %d\n", urb->status); + + switch (urb->status) { + case 0: + /* OK */ + break; + case -ENOENT: + dev_info(&urb->dev->dev, + "stopped by a call to usb_kill_urb() because of cleaning up a virtual connection\n"); + return; + case -ECONNRESET: + dev_info(&urb->dev->dev, + "unlinked by a call to usb_unlink_urb()\n"); + break; + case -EPIPE: + dev_info(&urb->dev->dev, "endpoint %d is stalled\n", + usb_pipeendpoint(urb->pipe)); + break; + case -ESHUTDOWN: + dev_info(&urb->dev->dev, "device removed?\n"); + break; + default: + dev_info(&urb->dev->dev, + "urb completion with non-zero status %d\n", + urb->status); + break; + } + + /* link a urb to the queue of tx. */ + spin_lock_irqsave(&sdev->priv_lock, flags); + if (priv->unlinking) { + stub_enqueue_ret_unlink(sdev, priv->seqnum, urb->status); + stub_free_priv_and_urb(priv); + } else { + list_move_tail(&priv->list, &sdev->priv_tx); + } + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + /* wake up tx_thread */ + wake_up(&sdev->tx_waitq); +} + +static inline void setup_base_pdu(struct usbip_header_basic *base, + __u32 command, __u32 seqnum) +{ + base->command = command; + base->seqnum = seqnum; + base->devid = 0; + base->ep = 0; + base->direction = 0; +} + +static void setup_ret_submit_pdu(struct usbip_header *rpdu, struct urb *urb) +{ + struct stub_priv *priv = (struct stub_priv *) urb->context; + + setup_base_pdu(&rpdu->base, USBIP_RET_SUBMIT, priv->seqnum); + usbip_pack_pdu(rpdu, urb, USBIP_RET_SUBMIT, 1); +} + +static void setup_ret_unlink_pdu(struct usbip_header *rpdu, + struct stub_unlink *unlink) +{ + setup_base_pdu(&rpdu->base, USBIP_RET_UNLINK, unlink->seqnum); + rpdu->u.ret_unlink.status = unlink->status; +} + +static struct stub_priv *dequeue_from_priv_tx(struct stub_device *sdev) +{ + unsigned long flags; + struct stub_priv *priv, *tmp; + + spin_lock_irqsave(&sdev->priv_lock, flags); + + list_for_each_entry_safe(priv, tmp, &sdev->priv_tx, list) { + list_move_tail(&priv->list, &sdev->priv_free); + spin_unlock_irqrestore(&sdev->priv_lock, flags); + return priv; + } + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return NULL; +} + +static int stub_send_ret_submit(struct stub_device *sdev) +{ + unsigned long flags; + struct stub_priv *priv, *tmp; + + struct msghdr msg; + size_t txsize; + + size_t total_size = 0; + + while ((priv = dequeue_from_priv_tx(sdev)) != NULL) { + int ret; + struct urb *urb = priv->urb; + struct usbip_header pdu_header; + struct usbip_iso_packet_descriptor *iso_buffer = NULL; + struct kvec *iov = NULL; + int iovnum = 0; + + txsize = 0; + memset(&pdu_header, 0, sizeof(pdu_header)); + memset(&msg, 0, sizeof(msg)); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + iovnum = 2 + urb->number_of_packets; + else + iovnum = 2; + + iov = kcalloc(iovnum, sizeof(struct kvec), GFP_KERNEL); + + if (!iov) { + usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_MALLOC); + return -1; + } + + iovnum = 0; + + /* 1. setup usbip_header */ + setup_ret_submit_pdu(&pdu_header, urb); + usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n", + pdu_header.base.seqnum, urb); + usbip_header_correct_endian(&pdu_header, 1); + + iov[iovnum].iov_base = &pdu_header; + iov[iovnum].iov_len = sizeof(pdu_header); + iovnum++; + txsize += sizeof(pdu_header); + + /* 2. setup transfer buffer */ + if (usb_pipein(urb->pipe) && + usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS && + urb->actual_length > 0) { + iov[iovnum].iov_base = urb->transfer_buffer; + iov[iovnum].iov_len = urb->actual_length; + iovnum++; + txsize += urb->actual_length; + } else if (usb_pipein(urb->pipe) && + usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + /* + * For isochronous packets: actual length is the sum of + * the actual length of the individual, packets, but as + * the packet offsets are not changed there will be + * padding between the packets. To optimally use the + * bandwidth the padding is not transmitted. + */ + + int i; + + for (i = 0; i < urb->number_of_packets; i++) { + iov[iovnum].iov_base = urb->transfer_buffer + + urb->iso_frame_desc[i].offset; + iov[iovnum].iov_len = + urb->iso_frame_desc[i].actual_length; + iovnum++; + txsize += urb->iso_frame_desc[i].actual_length; + } + + if (txsize != sizeof(pdu_header) + urb->actual_length) { + dev_err(&sdev->interface->dev, + "actual length of urb %d does not match iso packet sizes %zu\n", + urb->actual_length, + txsize-sizeof(pdu_header)); + kfree(iov); + usbip_event_add(&sdev->ud, + SDEV_EVENT_ERROR_TCP); + return -1; + } + } + + /* 3. setup iso_packet_descriptor */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + ssize_t len = 0; + + iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len); + if (!iso_buffer) { + usbip_event_add(&sdev->ud, + SDEV_EVENT_ERROR_MALLOC); + kfree(iov); + return -1; + } + + iov[iovnum].iov_base = iso_buffer; + iov[iovnum].iov_len = len; + txsize += len; + iovnum++; + } + + ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg, + iov, iovnum, txsize); + if (ret != txsize) { + dev_err(&sdev->interface->dev, + "sendmsg failed!, retval %d for %zd\n", + ret, txsize); + kfree(iov); + kfree(iso_buffer); + usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP); + return -1; + } + + kfree(iov); + kfree(iso_buffer); + + total_size += txsize; + } + + spin_lock_irqsave(&sdev->priv_lock, flags); + list_for_each_entry_safe(priv, tmp, &sdev->priv_free, list) { + stub_free_priv_and_urb(priv); + } + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return total_size; +} + +static struct stub_unlink *dequeue_from_unlink_tx(struct stub_device *sdev) +{ + unsigned long flags; + struct stub_unlink *unlink, *tmp; + + spin_lock_irqsave(&sdev->priv_lock, flags); + + list_for_each_entry_safe(unlink, tmp, &sdev->unlink_tx, list) { + list_move_tail(&unlink->list, &sdev->unlink_free); + spin_unlock_irqrestore(&sdev->priv_lock, flags); + return unlink; + } + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return NULL; +} + +static int stub_send_ret_unlink(struct stub_device *sdev) +{ + unsigned long flags; + struct stub_unlink *unlink, *tmp; + + struct msghdr msg; + struct kvec iov[1]; + size_t txsize; + + size_t total_size = 0; + + while ((unlink = dequeue_from_unlink_tx(sdev)) != NULL) { + int ret; + struct usbip_header pdu_header; + + txsize = 0; + memset(&pdu_header, 0, sizeof(pdu_header)); + memset(&msg, 0, sizeof(msg)); + memset(&iov, 0, sizeof(iov)); + + usbip_dbg_stub_tx("setup ret unlink %lu\n", unlink->seqnum); + + /* 1. setup usbip_header */ + setup_ret_unlink_pdu(&pdu_header, unlink); + usbip_header_correct_endian(&pdu_header, 1); + + iov[0].iov_base = &pdu_header; + iov[0].iov_len = sizeof(pdu_header); + txsize += sizeof(pdu_header); + + ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg, iov, + 1, txsize); + if (ret != txsize) { + dev_err(&sdev->interface->dev, + "sendmsg failed!, retval %d for %zd\n", + ret, txsize); + usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP); + return -1; + } + + usbip_dbg_stub_tx("send txdata\n"); + total_size += txsize; + } + + spin_lock_irqsave(&sdev->priv_lock, flags); + + list_for_each_entry_safe(unlink, tmp, &sdev->unlink_free, list) { + list_del(&unlink->list); + kfree(unlink); + } + + spin_unlock_irqrestore(&sdev->priv_lock, flags); + + return total_size; +} + +int stub_tx_loop(void *data) +{ + struct usbip_device *ud = data; + struct stub_device *sdev = container_of(ud, struct stub_device, ud); + + while (!kthread_should_stop()) { + if (usbip_event_happened(ud)) + break; + + /* + * send_ret_submit comes earlier than send_ret_unlink. stub_rx + * looks at only priv_init queue. If the completion of a URB is + * earlier than the receive of CMD_UNLINK, priv is moved to + * priv_tx queue and stub_rx does not find the target priv. In + * this case, vhci_rx receives the result of the submit request + * and then receives the result of the unlink request. The + * result of the submit is given back to the usbcore as the + * completion of the unlink request. The request of the + * unlink is ignored. This is ok because a driver who calls + * usb_unlink_urb() understands the unlink was too late by + * getting the status of the given-backed URB which has the + * status of usb_submit_urb(). + */ + if (stub_send_ret_submit(sdev) < 0) + break; + + if (stub_send_ret_unlink(sdev) < 0) + break; + + wait_event_interruptible(sdev->tx_waitq, + (!list_empty(&sdev->priv_tx) || + !list_empty(&sdev->unlink_tx) || + kthread_should_stop())); + } + + return 0; +} diff --git a/kernel/drivers/usb/usbip/usbip_common.c b/kernel/drivers/usb/usbip/usbip_common.c new file mode 100644 index 000000000..facaaf003 --- /dev/null +++ b/kernel/drivers/usb/usbip/usbip_common.c @@ -0,0 +1,776 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "usbip_common.h" + +#define DRIVER_AUTHOR "Takahiro Hirofuchi " +#define DRIVER_DESC "USB/IP Core" + +#ifdef CONFIG_USBIP_DEBUG +unsigned long usbip_debug_flag = 0xffffffff; +#else +unsigned long usbip_debug_flag; +#endif +EXPORT_SYMBOL_GPL(usbip_debug_flag); +module_param(usbip_debug_flag, ulong, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(usbip_debug_flag, "debug flags (defined in usbip_common.h)"); + +/* FIXME */ +struct device_attribute dev_attr_usbip_debug; +EXPORT_SYMBOL_GPL(dev_attr_usbip_debug); + +static ssize_t usbip_debug_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%lx\n", usbip_debug_flag); +} + +static ssize_t usbip_debug_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + if (sscanf(buf, "%lx", &usbip_debug_flag) != 1) + return -EINVAL; + return count; +} +DEVICE_ATTR_RW(usbip_debug); + +static void usbip_dump_buffer(char *buff, int bufflen) +{ + print_hex_dump(KERN_DEBUG, "usbip-core", DUMP_PREFIX_OFFSET, 16, 4, + buff, bufflen, false); +} + +static void usbip_dump_pipe(unsigned int p) +{ + unsigned char type = usb_pipetype(p); + unsigned char ep = usb_pipeendpoint(p); + unsigned char dev = usb_pipedevice(p); + unsigned char dir = usb_pipein(p); + + pr_debug("dev(%d) ep(%d) [%s] ", dev, ep, dir ? "IN" : "OUT"); + + switch (type) { + case PIPE_ISOCHRONOUS: + pr_debug("ISO\n"); + break; + case PIPE_INTERRUPT: + pr_debug("INT\n"); + break; + case PIPE_CONTROL: + pr_debug("CTRL\n"); + break; + case PIPE_BULK: + pr_debug("BULK\n"); + break; + default: + pr_debug("ERR\n"); + break; + } +} + +static void usbip_dump_usb_device(struct usb_device *udev) +{ + struct device *dev = &udev->dev; + int i; + + dev_dbg(dev, " devnum(%d) devpath(%s) usb speed(%s)", + udev->devnum, udev->devpath, usb_speed_string(udev->speed)); + + pr_debug("tt %p, ttport %d\n", udev->tt, udev->ttport); + + dev_dbg(dev, " "); + for (i = 0; i < 16; i++) + pr_debug(" %2u", i); + pr_debug("\n"); + + dev_dbg(dev, " toggle0(IN) :"); + for (i = 0; i < 16; i++) + pr_debug(" %2u", (udev->toggle[0] & (1 << i)) ? 1 : 0); + pr_debug("\n"); + + dev_dbg(dev, " toggle1(OUT):"); + for (i = 0; i < 16; i++) + pr_debug(" %2u", (udev->toggle[1] & (1 << i)) ? 1 : 0); + pr_debug("\n"); + + dev_dbg(dev, " epmaxp_in :"); + for (i = 0; i < 16; i++) { + if (udev->ep_in[i]) + pr_debug(" %2u", + le16_to_cpu(udev->ep_in[i]->desc.wMaxPacketSize)); + } + pr_debug("\n"); + + dev_dbg(dev, " epmaxp_out :"); + for (i = 0; i < 16; i++) { + if (udev->ep_out[i]) + pr_debug(" %2u", + le16_to_cpu(udev->ep_out[i]->desc.wMaxPacketSize)); + } + pr_debug("\n"); + + dev_dbg(dev, "parent %p, bus %p\n", udev->parent, udev->bus); + + dev_dbg(dev, + "descriptor %p, config %p, actconfig %p, rawdescriptors %p\n", + &udev->descriptor, udev->config, + udev->actconfig, udev->rawdescriptors); + + dev_dbg(dev, "have_langid %d, string_langid %d\n", + udev->have_langid, udev->string_langid); + + dev_dbg(dev, "maxchild %d\n", udev->maxchild); +} + +static void usbip_dump_request_type(__u8 rt) +{ + switch (rt & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + pr_debug("DEVICE"); + break; + case USB_RECIP_INTERFACE: + pr_debug("INTERF"); + break; + case USB_RECIP_ENDPOINT: + pr_debug("ENDPOI"); + break; + case USB_RECIP_OTHER: + pr_debug("OTHER "); + break; + default: + pr_debug("------"); + break; + } +} + +static void usbip_dump_usb_ctrlrequest(struct usb_ctrlrequest *cmd) +{ + if (!cmd) { + pr_debug(" : null pointer\n"); + return; + } + + pr_debug(" "); + pr_debug("bRequestType(%02X) bRequest(%02X) wValue(%04X) wIndex(%04X) wLength(%04X) ", + cmd->bRequestType, cmd->bRequest, + cmd->wValue, cmd->wIndex, cmd->wLength); + pr_debug("\n "); + + if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + pr_debug("STANDARD "); + switch (cmd->bRequest) { + case USB_REQ_GET_STATUS: + pr_debug("GET_STATUS\n"); + break; + case USB_REQ_CLEAR_FEATURE: + pr_debug("CLEAR_FEAT\n"); + break; + case USB_REQ_SET_FEATURE: + pr_debug("SET_FEAT\n"); + break; + case USB_REQ_SET_ADDRESS: + pr_debug("SET_ADDRRS\n"); + break; + case USB_REQ_GET_DESCRIPTOR: + pr_debug("GET_DESCRI\n"); + break; + case USB_REQ_SET_DESCRIPTOR: + pr_debug("SET_DESCRI\n"); + break; + case USB_REQ_GET_CONFIGURATION: + pr_debug("GET_CONFIG\n"); + break; + case USB_REQ_SET_CONFIGURATION: + pr_debug("SET_CONFIG\n"); + break; + case USB_REQ_GET_INTERFACE: + pr_debug("GET_INTERF\n"); + break; + case USB_REQ_SET_INTERFACE: + pr_debug("SET_INTERF\n"); + break; + case USB_REQ_SYNCH_FRAME: + pr_debug("SYNC_FRAME\n"); + break; + default: + pr_debug("REQ(%02X)\n", cmd->bRequest); + break; + } + usbip_dump_request_type(cmd->bRequestType); + } else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) { + pr_debug("CLASS\n"); + } else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) { + pr_debug("VENDOR\n"); + } else if ((cmd->bRequestType & USB_TYPE_MASK) == USB_TYPE_RESERVED) { + pr_debug("RESERVED\n"); + } +} + +void usbip_dump_urb(struct urb *urb) +{ + struct device *dev; + + if (!urb) { + pr_debug("urb: null pointer!!\n"); + return; + } + + if (!urb->dev) { + pr_debug("urb->dev: null pointer!!\n"); + return; + } + + dev = &urb->dev->dev; + + dev_dbg(dev, " urb :%p\n", urb); + dev_dbg(dev, " dev :%p\n", urb->dev); + + usbip_dump_usb_device(urb->dev); + + dev_dbg(dev, " pipe :%08x ", urb->pipe); + + usbip_dump_pipe(urb->pipe); + + dev_dbg(dev, " status :%d\n", urb->status); + dev_dbg(dev, " transfer_flags :%08X\n", urb->transfer_flags); + dev_dbg(dev, " transfer_buffer :%p\n", urb->transfer_buffer); + dev_dbg(dev, " transfer_buffer_length:%d\n", + urb->transfer_buffer_length); + dev_dbg(dev, " actual_length :%d\n", urb->actual_length); + dev_dbg(dev, " setup_packet :%p\n", urb->setup_packet); + + if (urb->setup_packet && usb_pipetype(urb->pipe) == PIPE_CONTROL) + usbip_dump_usb_ctrlrequest( + (struct usb_ctrlrequest *)urb->setup_packet); + + dev_dbg(dev, " start_frame :%d\n", urb->start_frame); + dev_dbg(dev, " number_of_packets :%d\n", urb->number_of_packets); + dev_dbg(dev, " interval :%d\n", urb->interval); + dev_dbg(dev, " error_count :%d\n", urb->error_count); + dev_dbg(dev, " context :%p\n", urb->context); + dev_dbg(dev, " complete :%p\n", urb->complete); +} +EXPORT_SYMBOL_GPL(usbip_dump_urb); + +void usbip_dump_header(struct usbip_header *pdu) +{ + pr_debug("BASE: cmd %u seq %u devid %u dir %u ep %u\n", + pdu->base.command, + pdu->base.seqnum, + pdu->base.devid, + pdu->base.direction, + pdu->base.ep); + + switch (pdu->base.command) { + case USBIP_CMD_SUBMIT: + pr_debug("USBIP_CMD_SUBMIT: x_flags %u x_len %u sf %u #p %d iv %d\n", + pdu->u.cmd_submit.transfer_flags, + pdu->u.cmd_submit.transfer_buffer_length, + pdu->u.cmd_submit.start_frame, + pdu->u.cmd_submit.number_of_packets, + pdu->u.cmd_submit.interval); + break; + case USBIP_CMD_UNLINK: + pr_debug("USBIP_CMD_UNLINK: seq %u\n", + pdu->u.cmd_unlink.seqnum); + break; + case USBIP_RET_SUBMIT: + pr_debug("USBIP_RET_SUBMIT: st %d al %u sf %d #p %d ec %d\n", + pdu->u.ret_submit.status, + pdu->u.ret_submit.actual_length, + pdu->u.ret_submit.start_frame, + pdu->u.ret_submit.number_of_packets, + pdu->u.ret_submit.error_count); + break; + case USBIP_RET_UNLINK: + pr_debug("USBIP_RET_UNLINK: status %d\n", + pdu->u.ret_unlink.status); + break; + default: + /* NOT REACHED */ + pr_err("unknown command\n"); + break; + } +} +EXPORT_SYMBOL_GPL(usbip_dump_header); + +/* Receive data over TCP/IP. */ +int usbip_recv(struct socket *sock, void *buf, int size) +{ + int result; + struct msghdr msg; + struct kvec iov; + int total = 0; + + /* for blocks of if (usbip_dbg_flag_xmit) */ + char *bp = buf; + int osize = size; + + usbip_dbg_xmit("enter\n"); + + if (!sock || !buf || !size) { + pr_err("invalid arg, sock %p buff %p size %d\n", sock, buf, + size); + return -EINVAL; + } + + do { + sock->sk->sk_allocation = GFP_NOIO; + iov.iov_base = buf; + iov.iov_len = size; + msg.msg_name = NULL; + msg.msg_namelen = 0; + msg.msg_control = NULL; + msg.msg_controllen = 0; + msg.msg_flags = MSG_NOSIGNAL; + + result = kernel_recvmsg(sock, &msg, &iov, 1, size, MSG_WAITALL); + if (result <= 0) { + pr_debug("receive sock %p buf %p size %u ret %d total %d\n", + sock, buf, size, result, total); + goto err; + } + + size -= result; + buf += result; + total += result; + } while (size > 0); + + if (usbip_dbg_flag_xmit) { + if (!in_interrupt()) + pr_debug("%-10s:", current->comm); + else + pr_debug("interrupt :"); + + pr_debug("receiving....\n"); + usbip_dump_buffer(bp, osize); + pr_debug("received, osize %d ret %d size %d total %d\n", + osize, result, size, total); + } + + return total; + +err: + return result; +} +EXPORT_SYMBOL_GPL(usbip_recv); + +/* there may be more cases to tweak the flags. */ +static unsigned int tweak_transfer_flags(unsigned int flags) +{ + flags &= ~URB_NO_TRANSFER_DMA_MAP; + return flags; +} + +static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb, + int pack) +{ + struct usbip_header_cmd_submit *spdu = &pdu->u.cmd_submit; + + /* + * Some members are not still implemented in usbip. I hope this issue + * will be discussed when usbip is ported to other operating systems. + */ + if (pack) { + spdu->transfer_flags = + tweak_transfer_flags(urb->transfer_flags); + spdu->transfer_buffer_length = urb->transfer_buffer_length; + spdu->start_frame = urb->start_frame; + spdu->number_of_packets = urb->number_of_packets; + spdu->interval = urb->interval; + } else { + urb->transfer_flags = spdu->transfer_flags; + urb->transfer_buffer_length = spdu->transfer_buffer_length; + urb->start_frame = spdu->start_frame; + urb->number_of_packets = spdu->number_of_packets; + urb->interval = spdu->interval; + } +} + +static void usbip_pack_ret_submit(struct usbip_header *pdu, struct urb *urb, + int pack) +{ + struct usbip_header_ret_submit *rpdu = &pdu->u.ret_submit; + + if (pack) { + rpdu->status = urb->status; + rpdu->actual_length = urb->actual_length; + rpdu->start_frame = urb->start_frame; + rpdu->number_of_packets = urb->number_of_packets; + rpdu->error_count = urb->error_count; + } else { + urb->status = rpdu->status; + urb->actual_length = rpdu->actual_length; + urb->start_frame = rpdu->start_frame; + urb->number_of_packets = rpdu->number_of_packets; + urb->error_count = rpdu->error_count; + } +} + +void usbip_pack_pdu(struct usbip_header *pdu, struct urb *urb, int cmd, + int pack) +{ + switch (cmd) { + case USBIP_CMD_SUBMIT: + usbip_pack_cmd_submit(pdu, urb, pack); + break; + case USBIP_RET_SUBMIT: + usbip_pack_ret_submit(pdu, urb, pack); + break; + default: + /* NOT REACHED */ + pr_err("unknown command\n"); + break; + } +} +EXPORT_SYMBOL_GPL(usbip_pack_pdu); + +static void correct_endian_basic(struct usbip_header_basic *base, int send) +{ + if (send) { + base->command = cpu_to_be32(base->command); + base->seqnum = cpu_to_be32(base->seqnum); + base->devid = cpu_to_be32(base->devid); + base->direction = cpu_to_be32(base->direction); + base->ep = cpu_to_be32(base->ep); + } else { + base->command = be32_to_cpu(base->command); + base->seqnum = be32_to_cpu(base->seqnum); + base->devid = be32_to_cpu(base->devid); + base->direction = be32_to_cpu(base->direction); + base->ep = be32_to_cpu(base->ep); + } +} + +static void correct_endian_cmd_submit(struct usbip_header_cmd_submit *pdu, + int send) +{ + if (send) { + pdu->transfer_flags = cpu_to_be32(pdu->transfer_flags); + + cpu_to_be32s(&pdu->transfer_buffer_length); + cpu_to_be32s(&pdu->start_frame); + cpu_to_be32s(&pdu->number_of_packets); + cpu_to_be32s(&pdu->interval); + } else { + pdu->transfer_flags = be32_to_cpu(pdu->transfer_flags); + + be32_to_cpus(&pdu->transfer_buffer_length); + be32_to_cpus(&pdu->start_frame); + be32_to_cpus(&pdu->number_of_packets); + be32_to_cpus(&pdu->interval); + } +} + +static void correct_endian_ret_submit(struct usbip_header_ret_submit *pdu, + int send) +{ + if (send) { + cpu_to_be32s(&pdu->status); + cpu_to_be32s(&pdu->actual_length); + cpu_to_be32s(&pdu->start_frame); + cpu_to_be32s(&pdu->number_of_packets); + cpu_to_be32s(&pdu->error_count); + } else { + be32_to_cpus(&pdu->status); + be32_to_cpus(&pdu->actual_length); + be32_to_cpus(&pdu->start_frame); + be32_to_cpus(&pdu->number_of_packets); + be32_to_cpus(&pdu->error_count); + } +} + +static void correct_endian_cmd_unlink(struct usbip_header_cmd_unlink *pdu, + int send) +{ + if (send) + pdu->seqnum = cpu_to_be32(pdu->seqnum); + else + pdu->seqnum = be32_to_cpu(pdu->seqnum); +} + +static void correct_endian_ret_unlink(struct usbip_header_ret_unlink *pdu, + int send) +{ + if (send) + cpu_to_be32s(&pdu->status); + else + be32_to_cpus(&pdu->status); +} + +void usbip_header_correct_endian(struct usbip_header *pdu, int send) +{ + __u32 cmd = 0; + + if (send) + cmd = pdu->base.command; + + correct_endian_basic(&pdu->base, send); + + if (!send) + cmd = pdu->base.command; + + switch (cmd) { + case USBIP_CMD_SUBMIT: + correct_endian_cmd_submit(&pdu->u.cmd_submit, send); + break; + case USBIP_RET_SUBMIT: + correct_endian_ret_submit(&pdu->u.ret_submit, send); + break; + case USBIP_CMD_UNLINK: + correct_endian_cmd_unlink(&pdu->u.cmd_unlink, send); + break; + case USBIP_RET_UNLINK: + correct_endian_ret_unlink(&pdu->u.ret_unlink, send); + break; + default: + /* NOT REACHED */ + pr_err("unknown command\n"); + break; + } +} +EXPORT_SYMBOL_GPL(usbip_header_correct_endian); + +static void usbip_iso_packet_correct_endian( + struct usbip_iso_packet_descriptor *iso, int send) +{ + /* does not need all members. but copy all simply. */ + if (send) { + iso->offset = cpu_to_be32(iso->offset); + iso->length = cpu_to_be32(iso->length); + iso->status = cpu_to_be32(iso->status); + iso->actual_length = cpu_to_be32(iso->actual_length); + } else { + iso->offset = be32_to_cpu(iso->offset); + iso->length = be32_to_cpu(iso->length); + iso->status = be32_to_cpu(iso->status); + iso->actual_length = be32_to_cpu(iso->actual_length); + } +} + +static void usbip_pack_iso(struct usbip_iso_packet_descriptor *iso, + struct usb_iso_packet_descriptor *uiso, int pack) +{ + if (pack) { + iso->offset = uiso->offset; + iso->length = uiso->length; + iso->status = uiso->status; + iso->actual_length = uiso->actual_length; + } else { + uiso->offset = iso->offset; + uiso->length = iso->length; + uiso->status = iso->status; + uiso->actual_length = iso->actual_length; + } +} + +/* must free buffer */ +struct usbip_iso_packet_descriptor* +usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen) +{ + struct usbip_iso_packet_descriptor *iso; + int np = urb->number_of_packets; + ssize_t size = np * sizeof(*iso); + int i; + + iso = kzalloc(size, GFP_KERNEL); + if (!iso) + return NULL; + + for (i = 0; i < np; i++) { + usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 1); + usbip_iso_packet_correct_endian(&iso[i], 1); + } + + *bufflen = size; + + return iso; +} +EXPORT_SYMBOL_GPL(usbip_alloc_iso_desc_pdu); + +/* some members of urb must be substituted before. */ +int usbip_recv_iso(struct usbip_device *ud, struct urb *urb) +{ + void *buff; + struct usbip_iso_packet_descriptor *iso; + int np = urb->number_of_packets; + int size = np * sizeof(*iso); + int i; + int ret; + int total_length = 0; + + if (!usb_pipeisoc(urb->pipe)) + return 0; + + /* my Bluetooth dongle gets ISO URBs which are np = 0 */ + if (np == 0) + return 0; + + buff = kzalloc(size, GFP_KERNEL); + if (!buff) + return -ENOMEM; + + ret = usbip_recv(ud->tcp_socket, buff, size); + if (ret != size) { + dev_err(&urb->dev->dev, "recv iso_frame_descriptor, %d\n", + ret); + kfree(buff); + + if (ud->side == USBIP_STUB) + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + else + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + + return -EPIPE; + } + + iso = (struct usbip_iso_packet_descriptor *) buff; + for (i = 0; i < np; i++) { + usbip_iso_packet_correct_endian(&iso[i], 0); + usbip_pack_iso(&iso[i], &urb->iso_frame_desc[i], 0); + total_length += urb->iso_frame_desc[i].actual_length; + } + + kfree(buff); + + if (total_length != urb->actual_length) { + dev_err(&urb->dev->dev, + "total length of iso packets %d not equal to actual length of buffer %d\n", + total_length, urb->actual_length); + + if (ud->side == USBIP_STUB) + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + else + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + + return -EPIPE; + } + + return ret; +} +EXPORT_SYMBOL_GPL(usbip_recv_iso); + +/* + * This functions restores the padding which was removed for optimizing + * the bandwidth during transfer over tcp/ip + * + * buffer and iso packets need to be stored and be in propeper endian in urb + * before calling this function + */ +void usbip_pad_iso(struct usbip_device *ud, struct urb *urb) +{ + int np = urb->number_of_packets; + int i; + int actualoffset = urb->actual_length; + + if (!usb_pipeisoc(urb->pipe)) + return; + + /* if no packets or length of data is 0, then nothing to unpack */ + if (np == 0 || urb->actual_length == 0) + return; + + /* + * if actual_length is transfer_buffer_length then no padding is + * present. + */ + if (urb->actual_length == urb->transfer_buffer_length) + return; + + /* + * loop over all packets from last to first (to prevent overwritting + * memory when padding) and move them into the proper place + */ + for (i = np-1; i > 0; i--) { + actualoffset -= urb->iso_frame_desc[i].actual_length; + memmove(urb->transfer_buffer + urb->iso_frame_desc[i].offset, + urb->transfer_buffer + actualoffset, + urb->iso_frame_desc[i].actual_length); + } +} +EXPORT_SYMBOL_GPL(usbip_pad_iso); + +/* some members of urb must be substituted before. */ +int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) +{ + int ret; + int size; + + if (ud->side == USBIP_STUB) { + /* the direction of urb must be OUT. */ + if (usb_pipein(urb->pipe)) + return 0; + + size = urb->transfer_buffer_length; + } else { + /* the direction of urb must be IN. */ + if (usb_pipeout(urb->pipe)) + return 0; + + size = urb->actual_length; + } + + /* no need to recv xbuff */ + if (!(size > 0)) + return 0; + + ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size); + if (ret != size) { + dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret); + if (ud->side == USBIP_STUB) { + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + } else { + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return -EPIPE; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(usbip_recv_xbuff); + +static int __init usbip_core_init(void) +{ + pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); + return 0; +} + +static void __exit usbip_core_exit(void) +{ + return; +} + +module_init(usbip_core_init); +module_exit(usbip_core_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(USBIP_VERSION); diff --git a/kernel/drivers/usb/usbip/usbip_common.h b/kernel/drivers/usb/usbip/usbip_common.h new file mode 100644 index 000000000..86b08475c --- /dev/null +++ b/kernel/drivers/usb/usbip/usbip_common.h @@ -0,0 +1,335 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#ifndef __USBIP_COMMON_H +#define __USBIP_COMMON_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USBIP_VERSION "1.0.0" + +#undef pr_fmt + +#ifdef DEBUG +#define pr_fmt(fmt) KBUILD_MODNAME ": %s:%d: " fmt, __func__, __LINE__ +#else +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#endif + +enum { + usbip_debug_xmit = (1 << 0), + usbip_debug_sysfs = (1 << 1), + usbip_debug_urb = (1 << 2), + usbip_debug_eh = (1 << 3), + + usbip_debug_stub_cmp = (1 << 8), + usbip_debug_stub_dev = (1 << 9), + usbip_debug_stub_rx = (1 << 10), + usbip_debug_stub_tx = (1 << 11), + + usbip_debug_vhci_rh = (1 << 8), + usbip_debug_vhci_hc = (1 << 9), + usbip_debug_vhci_rx = (1 << 10), + usbip_debug_vhci_tx = (1 << 11), + usbip_debug_vhci_sysfs = (1 << 12) +}; + +#define usbip_dbg_flag_xmit (usbip_debug_flag & usbip_debug_xmit) +#define usbip_dbg_flag_vhci_rh (usbip_debug_flag & usbip_debug_vhci_rh) +#define usbip_dbg_flag_vhci_hc (usbip_debug_flag & usbip_debug_vhci_hc) +#define usbip_dbg_flag_vhci_rx (usbip_debug_flag & usbip_debug_vhci_rx) +#define usbip_dbg_flag_vhci_tx (usbip_debug_flag & usbip_debug_vhci_tx) +#define usbip_dbg_flag_stub_rx (usbip_debug_flag & usbip_debug_stub_rx) +#define usbip_dbg_flag_stub_tx (usbip_debug_flag & usbip_debug_stub_tx) +#define usbip_dbg_flag_vhci_sysfs (usbip_debug_flag & usbip_debug_vhci_sysfs) + +extern unsigned long usbip_debug_flag; +extern struct device_attribute dev_attr_usbip_debug; + +#define usbip_dbg_with_flag(flag, fmt, args...) \ + do { \ + if (flag & usbip_debug_flag) \ + pr_debug(fmt, ##args); \ + } while (0) + +#define usbip_dbg_sysfs(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_sysfs, fmt , ##args) +#define usbip_dbg_xmit(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_xmit, fmt , ##args) +#define usbip_dbg_urb(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_urb, fmt , ##args) +#define usbip_dbg_eh(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_eh, fmt , ##args) + +#define usbip_dbg_vhci_rh(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_vhci_rh, fmt , ##args) +#define usbip_dbg_vhci_hc(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_vhci_hc, fmt , ##args) +#define usbip_dbg_vhci_rx(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_vhci_rx, fmt , ##args) +#define usbip_dbg_vhci_tx(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_vhci_tx, fmt , ##args) +#define usbip_dbg_vhci_sysfs(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_vhci_sysfs, fmt , ##args) + +#define usbip_dbg_stub_cmp(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_stub_cmp, fmt , ##args) +#define usbip_dbg_stub_rx(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_stub_rx, fmt , ##args) +#define usbip_dbg_stub_tx(fmt, args...) \ + usbip_dbg_with_flag(usbip_debug_stub_tx, fmt , ##args) + +/* + * USB/IP request headers + * + * Each request is transferred across the network to its counterpart, which + * facilitates the normal USB communication. The values contained in the headers + * are basically the same as in a URB. Currently, four request types are + * defined: + * + * - USBIP_CMD_SUBMIT: a USB request block, corresponds to usb_submit_urb() + * (client to server) + * + * - USBIP_RET_SUBMIT: the result of USBIP_CMD_SUBMIT + * (server to client) + * + * - USBIP_CMD_UNLINK: an unlink request of a pending USBIP_CMD_SUBMIT, + * corresponds to usb_unlink_urb() + * (client to server) + * + * - USBIP_RET_UNLINK: the result of USBIP_CMD_UNLINK + * (server to client) + * + */ +#define USBIP_CMD_SUBMIT 0x0001 +#define USBIP_CMD_UNLINK 0x0002 +#define USBIP_RET_SUBMIT 0x0003 +#define USBIP_RET_UNLINK 0x0004 + +#define USBIP_DIR_OUT 0x00 +#define USBIP_DIR_IN 0x01 + +/** + * struct usbip_header_basic - data pertinent to every request + * @command: the usbip request type + * @seqnum: sequential number that identifies requests; incremented per + * connection + * @devid: specifies a remote USB device uniquely instead of busnum and devnum; + * in the stub driver, this value is ((busnum << 16) | devnum) + * @direction: direction of the transfer + * @ep: endpoint number + */ +struct usbip_header_basic { + __u32 command; + __u32 seqnum; + __u32 devid; + __u32 direction; + __u32 ep; +} __packed; + +/** + * struct usbip_header_cmd_submit - USBIP_CMD_SUBMIT packet header + * @transfer_flags: URB flags + * @transfer_buffer_length: the data size for (in) or (out) transfer + * @start_frame: initial frame for isochronous or interrupt transfers + * @number_of_packets: number of isochronous packets + * @interval: maximum time for the request on the server-side host controller + * @setup: setup data for a control request + */ +struct usbip_header_cmd_submit { + __u32 transfer_flags; + __s32 transfer_buffer_length; + + /* it is difficult for usbip to sync frames (reserved only?) */ + __s32 start_frame; + __s32 number_of_packets; + __s32 interval; + + unsigned char setup[8]; +} __packed; + +/** + * struct usbip_header_ret_submit - USBIP_RET_SUBMIT packet header + * @status: return status of a non-iso request + * @actual_length: number of bytes transferred + * @start_frame: initial frame for isochronous or interrupt transfers + * @number_of_packets: number of isochronous packets + * @error_count: number of errors for isochronous transfers + */ +struct usbip_header_ret_submit { + __s32 status; + __s32 actual_length; + __s32 start_frame; + __s32 number_of_packets; + __s32 error_count; +} __packed; + +/** + * struct usbip_header_cmd_unlink - USBIP_CMD_UNLINK packet header + * @seqnum: the URB seqnum to unlink + */ +struct usbip_header_cmd_unlink { + __u32 seqnum; +} __packed; + +/** + * struct usbip_header_ret_unlink - USBIP_RET_UNLINK packet header + * @status: return status of the request + */ +struct usbip_header_ret_unlink { + __s32 status; +} __packed; + +/** + * struct usbip_header - common header for all usbip packets + * @base: the basic header + * @u: packet type dependent header + */ +struct usbip_header { + struct usbip_header_basic base; + + union { + struct usbip_header_cmd_submit cmd_submit; + struct usbip_header_ret_submit ret_submit; + struct usbip_header_cmd_unlink cmd_unlink; + struct usbip_header_ret_unlink ret_unlink; + } u; +} __packed; + +/* + * This is the same as usb_iso_packet_descriptor but packed for pdu. + */ +struct usbip_iso_packet_descriptor { + __u32 offset; + __u32 length; /* expected length */ + __u32 actual_length; + __u32 status; +} __packed; + +enum usbip_side { + USBIP_VHCI, + USBIP_STUB, +}; + +/* event handler */ +#define USBIP_EH_SHUTDOWN (1 << 0) +#define USBIP_EH_BYE (1 << 1) +#define USBIP_EH_RESET (1 << 2) +#define USBIP_EH_UNUSABLE (1 << 3) + +#define SDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE) +#define SDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) +#define SDEV_EVENT_ERROR_TCP (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) +#define SDEV_EVENT_ERROR_SUBMIT (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) +#define SDEV_EVENT_ERROR_MALLOC (USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE) + +#define VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_BYE) +#define VDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) +#define VDEV_EVENT_ERROR_TCP (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) +#define VDEV_EVENT_ERROR_MALLOC (USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE) + +/* a common structure for stub_device and vhci_device */ +struct usbip_device { + enum usbip_side side; + enum usbip_device_status status; + + /* lock for status */ + spinlock_t lock; + + struct socket *tcp_socket; + + struct task_struct *tcp_rx; + struct task_struct *tcp_tx; + + unsigned long event; + struct task_struct *eh; + wait_queue_head_t eh_waitq; + + struct eh_ops { + void (*shutdown)(struct usbip_device *); + void (*reset)(struct usbip_device *); + void (*unusable)(struct usbip_device *); + } eh_ops; +}; + +#define kthread_get_run(threadfn, data, namefmt, ...) \ +({ \ + struct task_struct *__k \ + = kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \ + if (!IS_ERR(__k)) { \ + get_task_struct(__k); \ + wake_up_process(__k); \ + } \ + __k; \ +}) + +#define kthread_stop_put(k) \ + do { \ + kthread_stop(k); \ + put_task_struct(k); \ + } while (0) + +/* usbip_common.c */ +void usbip_dump_urb(struct urb *purb); +void usbip_dump_header(struct usbip_header *pdu); + +int usbip_recv(struct socket *sock, void *buf, int size); + +void usbip_pack_pdu(struct usbip_header *pdu, struct urb *urb, int cmd, + int pack); +void usbip_header_correct_endian(struct usbip_header *pdu, int send); + +struct usbip_iso_packet_descriptor* +usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen); + +/* some members of urb must be substituted before. */ +int usbip_recv_iso(struct usbip_device *ud, struct urb *urb); +void usbip_pad_iso(struct usbip_device *ud, struct urb *urb); +int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb); + +/* usbip_event.c */ +int usbip_start_eh(struct usbip_device *ud); +void usbip_stop_eh(struct usbip_device *ud); +void usbip_event_add(struct usbip_device *ud, unsigned long event); +int usbip_event_happened(struct usbip_device *ud); + +static inline int interface_to_busnum(struct usb_interface *interface) +{ + struct usb_device *udev = interface_to_usbdev(interface); + + return udev->bus->busnum; +} + +static inline int interface_to_devnum(struct usb_interface *interface) +{ + struct usb_device *udev = interface_to_usbdev(interface); + + return udev->devnum; +} + +#endif /* __USBIP_COMMON_H */ diff --git a/kernel/drivers/usb/usbip/usbip_event.c b/kernel/drivers/usb/usbip/usbip_event.c new file mode 100644 index 000000000..64933b993 --- /dev/null +++ b/kernel/drivers/usb/usbip/usbip_event.c @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +#include "usbip_common.h" + +static int event_handler(struct usbip_device *ud) +{ + usbip_dbg_eh("enter\n"); + + /* + * Events are handled by only this thread. + */ + while (usbip_event_happened(ud)) { + usbip_dbg_eh("pending event %lx\n", ud->event); + + /* + * NOTE: shutdown must come first. + * Shutdown the device. + */ + if (ud->event & USBIP_EH_SHUTDOWN) { + ud->eh_ops.shutdown(ud); + ud->event &= ~USBIP_EH_SHUTDOWN; + } + + /* Reset the device. */ + if (ud->event & USBIP_EH_RESET) { + ud->eh_ops.reset(ud); + ud->event &= ~USBIP_EH_RESET; + } + + /* Mark the device as unusable. */ + if (ud->event & USBIP_EH_UNUSABLE) { + ud->eh_ops.unusable(ud); + ud->event &= ~USBIP_EH_UNUSABLE; + } + + /* Stop the error handler. */ + if (ud->event & USBIP_EH_BYE) + return -1; + } + + return 0; +} + +static int event_handler_loop(void *data) +{ + struct usbip_device *ud = data; + + while (!kthread_should_stop()) { + wait_event_interruptible(ud->eh_waitq, + usbip_event_happened(ud) || + kthread_should_stop()); + usbip_dbg_eh("wakeup\n"); + + if (event_handler(ud) < 0) + break; + } + + return 0; +} + +int usbip_start_eh(struct usbip_device *ud) +{ + init_waitqueue_head(&ud->eh_waitq); + ud->event = 0; + + ud->eh = kthread_run(event_handler_loop, ud, "usbip_eh"); + if (IS_ERR(ud->eh)) { + pr_warn("Unable to start control thread\n"); + return PTR_ERR(ud->eh); + } + + return 0; +} +EXPORT_SYMBOL_GPL(usbip_start_eh); + +void usbip_stop_eh(struct usbip_device *ud) +{ + if (ud->eh == current) + return; /* do not wait for myself */ + + kthread_stop(ud->eh); + usbip_dbg_eh("usbip_eh has finished\n"); +} +EXPORT_SYMBOL_GPL(usbip_stop_eh); + +void usbip_event_add(struct usbip_device *ud, unsigned long event) +{ + unsigned long flags; + + spin_lock_irqsave(&ud->lock, flags); + ud->event |= event; + wake_up(&ud->eh_waitq); + spin_unlock_irqrestore(&ud->lock, flags); +} +EXPORT_SYMBOL_GPL(usbip_event_add); + +int usbip_event_happened(struct usbip_device *ud) +{ + int happened = 0; + + spin_lock(&ud->lock); + if (ud->event != 0) + happened = 1; + spin_unlock(&ud->lock); + + return happened; +} +EXPORT_SYMBOL_GPL(usbip_event_happened); diff --git a/kernel/drivers/usb/usbip/usbip_protocol.txt b/kernel/drivers/usb/usbip/usbip_protocol.txt new file mode 100644 index 000000000..16b6fe272 --- /dev/null +++ b/kernel/drivers/usb/usbip/usbip_protocol.txt @@ -0,0 +1,358 @@ +PRELIMINARY DRAFT, MAY CONTAIN MISTAKES! +28 Jun 2011 + +The USB/IP protocol follows a server/client architecture. The server exports the +USB devices and the clients imports them. The device driver for the exported +USB device runs on the client machine. + +The client may ask for the list of the exported USB devices. To get the list the +client opens a TCP/IP connection towards the server, and sends an OP_REQ_DEVLIST +packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent +in one or more pieces at the low level transport layer). The server sends back +the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the +TCP/IP connection is closed. + + virtual host controller usb host + "client" "server" + (imports USB devices) (exports USB devices) + | | + | OP_REQ_DEVLIST | + | ----------------------------------------------> | + | | + | OP_REP_DEVLIST | + | <---------------------------------------------- | + | | + +Once the client knows the list of exported USB devices it may decide to use one +of them. First the client opens a TCP/IP connection towards the server and +sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the +import was successful the TCP/IP connection remains open and will be used +to transfer the URB traffic between the client and the server. The client may +send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and +USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the +server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively. + + virtual host controller usb host + "client" "server" + (imports USB devices) (exports USB devices) + | | + | OP_REQ_IMPORT | + | ----------------------------------------------> | + | | + | OP_REP_IMPORT | + | <---------------------------------------------- | + | | + | | + | USBIP_CMD_SUBMIT(seqnum = n) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = n) | + | <---------------------------------------------- | + | . | + | : | + | | + | USBIP_CMD_SUBMIT(seqnum = m) | + | ----------------------------------------------> | + | | + | USBIP_CMD_SUBMIT(seqnum = m+1) | + | ----------------------------------------------> | + | | + | USBIP_CMD_SUBMIT(seqnum = m+2) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m) | + | <---------------------------------------------- | + | | + | USBIP_CMD_SUBMIT(seqnum = m+3) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m+1) | + | <---------------------------------------------- | + | | + | USBIP_CMD_SUBMIT(seqnum = m+4) | + | ----------------------------------------------> | + | | + | USBIP_RET_SUBMIT(seqnum = m+2) | + | <---------------------------------------------- | + | . | + | : | + | | + | USBIP_CMD_UNLINK | + | ----------------------------------------------> | + | | + | USBIP_RET_UNLINK | + | <---------------------------------------------- | + | | + +The fields are in network (big endian) byte order meaning that the most significant +byte (MSB) is stored at the lowest address. + + +OP_REQ_DEVLIST: Retrieve the list of exported USB devices. + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 +-----------+--------+------------+--------------------------------------------------- + 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB + | | | devices. +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 + +OP_REP_DEVLIST: Reply with the list of exported USB devices. + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0. +-----------+--------+------------+--------------------------------------------------- + 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | 0x00000000 | Status: 0 for OK +-----------+--------+------------+--------------------------------------------------- + 8 | 4 | n | Number of exported devices: 0 means no exported + | | | devices. +-----------+--------+------------+--------------------------------------------------- + 0x0C | | | From now on the exported n devices are described, + | | | if any. If no devices are exported the message + | | | ends with the previous "number of exported + | | | devices" field. +-----------+--------+------------+--------------------------------------------------- + | 256 | | path: Path of the device on the host exporting the + | | | USB device, string closed with zero byte, e.g. + | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" + | | | The unused bytes shall be filled with zero + | | | bytes. +-----------+--------+------------+--------------------------------------------------- + 0x10C | 32 | | busid: Bus ID of the exported device, string + | | | closed with zero byte, e.g. "3-2". The unused + | | | bytes shall be filled with zero bytes. +-----------+--------+------------+--------------------------------------------------- + 0x12C | 4 | | busnum +-----------+--------+------------+--------------------------------------------------- + 0x130 | 4 | | devnum +-----------+--------+------------+--------------------------------------------------- + 0x134 | 4 | | speed +-----------+--------+------------+--------------------------------------------------- + 0x138 | 2 | | idVendor +-----------+--------+------------+--------------------------------------------------- + 0x13A | 2 | | idProduct +-----------+--------+------------+--------------------------------------------------- + 0x13C | 2 | | bcdDevice +-----------+--------+------------+--------------------------------------------------- + 0x13E | 1 | | bDeviceClass +-----------+--------+------------+--------------------------------------------------- + 0x13F | 1 | | bDeviceSubClass +-----------+--------+------------+--------------------------------------------------- + 0x140 | 1 | | bDeviceProtocol +-----------+--------+------------+--------------------------------------------------- + 0x141 | 1 | | bConfigurationValue +-----------+--------+------------+--------------------------------------------------- + 0x142 | 1 | | bNumConfigurations +-----------+--------+------------+--------------------------------------------------- + 0x143 | 1 | | bNumInterfaces +-----------+--------+------------+--------------------------------------------------- + 0x144 | | m_0 | From now on each interface is described, all + | | | together bNumInterfaces times, with the + | | | the following 4 fields: +-----------+--------+------------+--------------------------------------------------- + | 1 | | bInterfaceClass +-----------+--------+------------+--------------------------------------------------- + 0x145 | 1 | | bInterfaceSubClass +-----------+--------+------------+--------------------------------------------------- + 0x146 | 1 | | bInterfaceProtocol +-----------+--------+------------+--------------------------------------------------- + 0x147 | 1 | | padding byte for alignment, shall be set to zero +-----------+--------+------------+--------------------------------------------------- + 0xC + | | | The second exported USB device starts at i=1 + i*0x138 + | | | with the busid field. + m_(i-1)*4 | | | + +OP_REQ_IMPORT: Request to import (attach) a remote USB device. + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 +-----------+--------+------------+--------------------------------------------------- + 2 | 2 | 0x8003 | Command code: import a remote USB device. +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 +-----------+--------+------------+--------------------------------------------------- + 8 | 32 | | busid: the busid of the exported device on the + | | | remote host. The possible values are taken + | | | from the message field OP_REP_DEVLIST.busid. + | | | A string closed with zero, the unused bytes + | | | shall be filled with zeros. +-----------+--------+------------+--------------------------------------------------- + +OP_REP_IMPORT: Reply to import (attach) a remote USB device. + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 +-----------+--------+------------+--------------------------------------------------- + 2 | 2 | 0x0003 | Reply code: Reply to import. +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | 0x00000000 | Status: 0 for OK + | | | 1 for error +-----------+--------+------------+--------------------------------------------------- + 8 | | | From now on comes the details of the imported + | | | device, if the previous status field was OK (0), + | | | otherwise the reply ends with the status field. +-----------+--------+------------+--------------------------------------------------- + | 256 | | path: Path of the device on the host exporting the + | | | USB device, string closed with zero byte, e.g. + | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" + | | | The unused bytes shall be filled with zero + | | | bytes. +-----------+--------+------------+--------------------------------------------------- + 0x108 | 32 | | busid: Bus ID of the exported device, string + | | | closed with zero byte, e.g. "3-2". The unused + | | | bytes shall be filled with zero bytes. +-----------+--------+------------+--------------------------------------------------- + 0x128 | 4 | | busnum +-----------+--------+------------+--------------------------------------------------- + 0x12C | 4 | | devnum +-----------+--------+------------+--------------------------------------------------- + 0x130 | 4 | | speed +-----------+--------+------------+--------------------------------------------------- + 0x134 | 2 | | idVendor +-----------+--------+------------+--------------------------------------------------- + 0x136 | 2 | | idProduct +-----------+--------+------------+--------------------------------------------------- + 0x138 | 2 | | bcdDevice +-----------+--------+------------+--------------------------------------------------- + 0x139 | 1 | | bDeviceClass +-----------+--------+------------+--------------------------------------------------- + 0x13A | 1 | | bDeviceSubClass +-----------+--------+------------+--------------------------------------------------- + 0x13B | 1 | | bDeviceProtocol +-----------+--------+------------+--------------------------------------------------- + 0x13C | 1 | | bConfigurationValue +-----------+--------+------------+--------------------------------------------------- + 0x13D | 1 | | bNumConfigurations +-----------+--------+------------+--------------------------------------------------- + 0x13E | 1 | | bNumInterfaces + +USBIP_CMD_SUBMIT: Submit an URB + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 4 | 0x00000001 | command: Submit an URB +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | | seqnum: the sequence number of the URB to submit +-----------+--------+------------+--------------------------------------------------- + 8 | 4 | | devid +-----------+--------+------------+--------------------------------------------------- + 0xC | 4 | | direction: 0: USBIP_DIR_OUT + | | | 1: USBIP_DIR_IN +-----------+--------+------------+--------------------------------------------------- + 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 +-----------+--------+------------+--------------------------------------------------- + 0x14 | 4 | | transfer_flags: possible values depend on the + | | | URB transfer type, see below +-----------+--------+------------+--------------------------------------------------- + 0x18 | 4 | | transfer_buffer_length +-----------+--------+------------+--------------------------------------------------- + 0x1C | 4 | | start_frame: specify the selected frame to + | | | transmit an ISO frame, ignored if URB_ISO_ASAP + | | | is specified at transfer_flags +-----------+--------+------------+--------------------------------------------------- + 0x20 | 4 | | number_of_packets: number of ISO packets +-----------+--------+------------+--------------------------------------------------- + 0x24 | 4 | | interval: maximum time for the request on the + | | | server-side host controller +-----------+--------+------------+--------------------------------------------------- + 0x28 | 8 | | setup: data bytes for USB setup, filled with + | | | zeros if not used +-----------+--------+------------+--------------------------------------------------- + 0x30 | | | URB data. For ISO transfers the padding between + | | | each ISO packets is not transmitted. + + + Allowed transfer_flags | value | control | interrupt | bulk | isochronous + -------------------------+------------+---------+-----------+----------+------------- + URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no + URB_ISO_ASAP | 0x00000002 | no | no | no | yes + URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes + URB_NO_FSBR | 0x00000020 | yes | no | no | no + URB_ZERO_PACKET | 0x00000040 | no | no | only out | no + URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes + URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes + URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes + + +USBIP_RET_SUBMIT: Reply for submitting an URB + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 4 | 0x00000003 | command +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | | seqnum: URB sequence number +-----------+--------+------------+--------------------------------------------------- + 8 | 4 | | devid +-----------+--------+------------+--------------------------------------------------- + 0xC | 4 | | direction: 0: USBIP_DIR_OUT + | | | 1: USBIP_DIR_IN +-----------+--------+------------+--------------------------------------------------- + 0x10 | 4 | | ep: endpoint number +-----------+--------+------------+--------------------------------------------------- + 0x14 | 4 | | status: zero for successful URB transaction, + | | | otherwise some kind of error happened. +-----------+--------+------------+--------------------------------------------------- + 0x18 | 4 | n | actual_length: number of URB data bytes +-----------+--------+------------+--------------------------------------------------- + 0x1C | 4 | | start_frame: for an ISO frame the actually + | | | selected frame for transmit. +-----------+--------+------------+--------------------------------------------------- + 0x20 | 4 | | number_of_packets +-----------+--------+------------+--------------------------------------------------- + 0x24 | 4 | | error_count +-----------+--------+------------+--------------------------------------------------- + 0x28 | 8 | | setup: data bytes for USB setup, filled with + | | | zeros if not used +-----------+--------+------------+--------------------------------------------------- + 0x30 | n | | URB data bytes. For ISO transfers the padding + | | | between each ISO packets is not transmitted. + +USBIP_CMD_UNLINK: Unlink an URB + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 4 | 0x00000002 | command: URB unlink command +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | | seqnum: URB sequence number to unlink: FIXME: is this so? +-----------+--------+------------+--------------------------------------------------- + 8 | 4 | | devid +-----------+--------+------------+--------------------------------------------------- + 0xC | 4 | | direction: 0: USBIP_DIR_OUT + | | | 1: USBIP_DIR_IN +-----------+--------+------------+--------------------------------------------------- + 0x10 | 4 | | ep: endpoint number: zero +-----------+--------+------------+--------------------------------------------------- + 0x14 | 4 | | seqnum: the URB sequence number given previously + | | | at USBIP_CMD_SUBMIT.seqnum field +-----------+--------+------------+--------------------------------------------------- + 0x30 | n | | URB data bytes. For ISO transfers the padding + | | | between each ISO packets is not transmitted. + +USBIP_RET_UNLINK: Reply for URB unlink + + Offset | Length | Value | Description +-----------+--------+------------+--------------------------------------------------- + 0 | 4 | 0x00000004 | command: reply for the URB unlink command +-----------+--------+------------+--------------------------------------------------- + 4 | 4 | | seqnum: the unlinked URB sequence number +-----------+--------+------------+--------------------------------------------------- + 8 | 4 | | devid +-----------+--------+------------+--------------------------------------------------- + 0xC | 4 | | direction: 0: USBIP_DIR_OUT + | | | 1: USBIP_DIR_IN +-----------+--------+------------+--------------------------------------------------- + 0x10 | 4 | | ep: endpoint number +-----------+--------+------------+--------------------------------------------------- + 0x14 | 4 | | status: This is the value contained in the + | | | urb->status in the URB completition handler. + | | | FIXME: a better explanation needed. +-----------+--------+------------+--------------------------------------------------- + 0x30 | n | | URB data bytes. For ISO transfers the padding + | | | between each ISO packets is not transmitted. diff --git a/kernel/drivers/usb/usbip/vhci.h b/kernel/drivers/usb/usbip/vhci.h new file mode 100644 index 000000000..a863a98a9 --- /dev/null +++ b/kernel/drivers/usb/usbip/vhci.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __USBIP_VHCI_H +#define __USBIP_VHCI_H + +#include +#include +#include +#include +#include +#include +#include +#include + +struct vhci_device { + struct usb_device *udev; + + /* + * devid specifies a remote usb device uniquely instead + * of combination of busnum and devnum. + */ + __u32 devid; + + /* speed of a remote device */ + enum usb_device_speed speed; + + /* vhci root-hub port to which this device is attached */ + __u32 rhport; + + struct usbip_device ud; + + /* lock for the below link lists */ + spinlock_t priv_lock; + + /* vhci_priv is linked to one of them. */ + struct list_head priv_tx; + struct list_head priv_rx; + + /* vhci_unlink is linked to one of them */ + struct list_head unlink_tx; + struct list_head unlink_rx; + + /* vhci_tx thread sleeps for this queue */ + wait_queue_head_t waitq_tx; +}; + +/* urb->hcpriv, use container_of() */ +struct vhci_priv { + unsigned long seqnum; + struct list_head list; + + struct vhci_device *vdev; + struct urb *urb; +}; + +struct vhci_unlink { + /* seqnum of this request */ + unsigned long seqnum; + + struct list_head list; + + /* seqnum of the unlink target */ + unsigned long unlink_seqnum; +}; + +/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */ +#define VHCI_NPORTS 8 + +/* for usb_bus.hcpriv */ +struct vhci_hcd { + spinlock_t lock; + + u32 port_status[VHCI_NPORTS]; + + unsigned resuming:1; + unsigned long re_timeout; + + atomic_t seqnum; + + /* + * NOTE: + * wIndex shows the port number and begins from 1. + * But, the index of this array begins from 0. + */ + struct vhci_device vdev[VHCI_NPORTS]; +}; + +extern struct vhci_hcd *the_controller; +extern const struct attribute_group dev_attr_group; + +/* vhci_hcd.c */ +void rh_port_connect(int rhport, enum usb_device_speed speed); + +/* vhci_rx.c */ +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum); +int vhci_rx_loop(void *data); + +/* vhci_tx.c */ +int vhci_tx_loop(void *data); + +static inline struct vhci_device *port_to_vdev(__u32 port) +{ + return &the_controller->vdev[port]; +} + +static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd) +{ + return (struct vhci_hcd *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci) +{ + return container_of((void *) vhci, struct usb_hcd, hcd_priv); +} + +static inline struct device *vhci_dev(struct vhci_hcd *vhci) +{ + return vhci_to_hcd(vhci)->self.controller; +} + +#endif /* __USBIP_VHCI_H */ diff --git a/kernel/drivers/usb/usbip/vhci_hcd.c b/kernel/drivers/usb/usbip/vhci_hcd.c new file mode 100644 index 000000000..e9ef1eccd --- /dev/null +++ b/kernel/drivers/usb/usbip/vhci_hcd.c @@ -0,0 +1,1168 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "usbip_common.h" +#include "vhci.h" + +#define DRIVER_AUTHOR "Takahiro Hirofuchi" +#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" + +/* + * TODO + * - update root hub emulation + * - move the emulation code to userland ? + * porting to other operating systems + * minimize kernel code + * - add suspend/resume code + * - clean up everything + */ + +/* See usb gadget dummy hcd */ + +static int vhci_hub_status(struct usb_hcd *hcd, char *buff); +static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buff, u16 wLength); +static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags); +static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); +static int vhci_start(struct usb_hcd *vhci_hcd); +static void vhci_stop(struct usb_hcd *hcd); +static int vhci_get_frame_number(struct usb_hcd *hcd); + +static const char driver_name[] = "vhci_hcd"; +static const char driver_desc[] = "USB/IP Virtual Host Controller"; + +struct vhci_hcd *the_controller; + +static const char * const bit_desc[] = { + "CONNECTION", /*0*/ + "ENABLE", /*1*/ + "SUSPEND", /*2*/ + "OVER_CURRENT", /*3*/ + "RESET", /*4*/ + "R5", /*5*/ + "R6", /*6*/ + "R7", /*7*/ + "POWER", /*8*/ + "LOWSPEED", /*9*/ + "HIGHSPEED", /*10*/ + "PORT_TEST", /*11*/ + "INDICATOR", /*12*/ + "R13", /*13*/ + "R14", /*14*/ + "R15", /*15*/ + "C_CONNECTION", /*16*/ + "C_ENABLE", /*17*/ + "C_SUSPEND", /*18*/ + "C_OVER_CURRENT", /*19*/ + "C_RESET", /*20*/ + "R21", /*21*/ + "R22", /*22*/ + "R23", /*23*/ + "R24", /*24*/ + "R25", /*25*/ + "R26", /*26*/ + "R27", /*27*/ + "R28", /*28*/ + "R29", /*29*/ + "R30", /*30*/ + "R31", /*31*/ +}; + +static void dump_port_status_diff(u32 prev_status, u32 new_status) +{ + int i = 0; + u32 bit = 1; + + pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); + while (bit) { + u32 prev = prev_status & bit; + u32 new = new_status & bit; + char change; + + if (!prev && new) + change = '+'; + else if (prev && !new) + change = '-'; + else + change = ' '; + + if (prev || new) + pr_debug(" %c%s\n", change, bit_desc[i]); + bit <<= 1; + i++; + } + pr_debug("\n"); +} + +void rh_port_connect(int rhport, enum usb_device_speed speed) +{ + usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); + + spin_lock(&the_controller->lock); + + the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION + | (1 << USB_PORT_FEAT_C_CONNECTION); + + switch (speed) { + case USB_SPEED_HIGH: + the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED; + break; + default: + break; + } + + spin_unlock(&the_controller->lock); + + usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); +} + +static void rh_port_disconnect(int rhport) +{ + usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); + + spin_lock(&the_controller->lock); + + the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION; + the_controller->port_status[rhport] |= + (1 << USB_PORT_FEAT_C_CONNECTION); + + spin_unlock(&the_controller->lock); + usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); +} + +#define PORT_C_MASK \ + ((USB_PORT_STAT_C_CONNECTION \ + | USB_PORT_STAT_C_ENABLE \ + | USB_PORT_STAT_C_SUSPEND \ + | USB_PORT_STAT_C_OVERCURRENT \ + | USB_PORT_STAT_C_RESET) << 16) + +/* + * Returns 0 if the status hasn't changed, or the number of bytes in buf. + * Ports are 0-indexed from the HCD point of view, + * and 1-indexed from the USB core pointer of view. + * + * @buf: a bitmap to show which port status has been changed. + * bit 0: reserved + * bit 1: the status of port 0 has been changed. + * bit 2: the status of port 1 has been changed. + * ... + */ +static int vhci_hub_status(struct usb_hcd *hcd, char *buf) +{ + struct vhci_hcd *vhci; + int retval; + int rhport; + int changed = 0; + + retval = DIV_ROUND_UP(VHCI_NPORTS + 1, 8); + memset(buf, 0, retval); + + vhci = hcd_to_vhci(hcd); + + spin_lock(&vhci->lock); + if (!HCD_HW_ACCESSIBLE(hcd)) { + usbip_dbg_vhci_rh("hw accessible flag not on?\n"); + goto done; + } + + /* check pseudo status register for each port */ + for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + if ((vhci->port_status[rhport] & PORT_C_MASK)) { + /* The status of a port has been changed, */ + usbip_dbg_vhci_rh("port %d status changed\n", rhport); + + buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; + changed = 1; + } + } + + if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) + usb_hcd_resume_root_hub(hcd); + +done: + spin_unlock(&vhci->lock); + return changed ? retval : 0; +} + +static inline void hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof(*desc)); + desc->bDescriptorType = USB_DT_HUB; + desc->bDescLength = 9; + desc->wHubCharacteristics = __constant_cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); + desc->bNbrPorts = VHCI_NPORTS; + desc->u.hs.DeviceRemovable[0] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; +} + +static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct vhci_hcd *dum; + int retval = 0; + int rhport; + + u32 prev_port_status[VHCI_NPORTS]; + + if (!HCD_HW_ACCESSIBLE(hcd)) + return -ETIMEDOUT; + + /* + * NOTE: + * wIndex shows the port number and begins from 1. + */ + usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, + wIndex); + if (wIndex > VHCI_NPORTS) + pr_err("invalid port number %d\n", wIndex); + rhport = ((__u8)(wIndex & 0x00ff)) - 1; + + dum = hcd_to_vhci(hcd); + + spin_lock(&dum->lock); + + /* store old status and compare now and old later */ + if (usbip_dbg_flag_vhci_rh) { + memcpy(prev_port_status, dum->port_status, + sizeof(prev_port_status)); + } + + switch (typeReq) { + case ClearHubFeature: + usbip_dbg_vhci_rh(" ClearHubFeature\n"); + break; + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) { + /* 20msec signaling */ + dum->resuming = 1; + dum->re_timeout = + jiffies + msecs_to_jiffies(20); + } + break; + case USB_PORT_FEAT_POWER: + usbip_dbg_vhci_rh( + " ClearPortFeature: USB_PORT_FEAT_POWER\n"); + dum->port_status[rhport] = 0; + dum->resuming = 0; + break; + case USB_PORT_FEAT_C_RESET: + usbip_dbg_vhci_rh( + " ClearPortFeature: USB_PORT_FEAT_C_RESET\n"); + switch (dum->vdev[rhport].speed) { + case USB_SPEED_HIGH: + dum->port_status[rhport] |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum->port_status[rhport] |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + break; + } + default: + usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", + wValue); + dum->port_status[rhport] &= ~(1 << wValue); + break; + } + break; + case GetHubDescriptor: + usbip_dbg_vhci_rh(" GetHubDescriptor\n"); + hub_descriptor((struct usb_hub_descriptor *) buf); + break; + case GetHubStatus: + usbip_dbg_vhci_rh(" GetHubStatus\n"); + *(__le32 *) buf = cpu_to_le32(0); + break; + case GetPortStatus: + usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); + if (wIndex > VHCI_NPORTS || wIndex < 1) { + pr_err("invalid port number %d\n", wIndex); + retval = -EPIPE; + } + + /* we do not care about resume. */ + + /* whoever resets or resumes must GetPortStatus to + * complete it!! + */ + if (dum->resuming && time_after(jiffies, dum->re_timeout)) { + dum->port_status[rhport] |= + (1 << USB_PORT_FEAT_C_SUSPEND); + dum->port_status[rhport] &= + ~(1 << USB_PORT_FEAT_SUSPEND); + dum->resuming = 0; + dum->re_timeout = 0; + } + + if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != + 0 && time_after(jiffies, dum->re_timeout)) { + dum->port_status[rhport] |= + (1 << USB_PORT_FEAT_C_RESET); + dum->port_status[rhport] &= + ~(1 << USB_PORT_FEAT_RESET); + dum->re_timeout = 0; + + if (dum->vdev[rhport].ud.status == + VDEV_ST_NOTASSIGNED) { + usbip_dbg_vhci_rh( + " enable rhport %d (status %u)\n", + rhport, + dum->vdev[rhport].ud.status); + dum->port_status[rhport] |= + USB_PORT_STAT_ENABLE; + } + } + ((__le16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]); + ((__le16 *) buf)[1] = + cpu_to_le16(dum->port_status[rhport] >> 16); + + usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], + ((u16 *)buf)[1]); + break; + case SetHubFeature: + usbip_dbg_vhci_rh(" SetHubFeature\n"); + retval = -EPIPE; + break; + case SetPortFeature: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + usbip_dbg_vhci_rh( + " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); + break; + case USB_PORT_FEAT_RESET: + usbip_dbg_vhci_rh( + " SetPortFeature: USB_PORT_FEAT_RESET\n"); + /* if it's already running, disconnect first */ + if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) { + dum->port_status[rhport] &= + ~(USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED); + /* FIXME test that code path! */ + } + /* 50msec reset signaling */ + dum->re_timeout = jiffies + msecs_to_jiffies(50); + + /* FALLTHROUGH */ + default: + usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", + wValue); + dum->port_status[rhport] |= (1 << wValue); + break; + } + break; + + default: + pr_err("default: no such request\n"); + + /* "protocol stall" on error */ + retval = -EPIPE; + } + + if (usbip_dbg_flag_vhci_rh) { + pr_debug("port %d\n", rhport); + /* Only dump valid port status */ + if (rhport >= 0) { + dump_port_status_diff(prev_port_status[rhport], + dum->port_status[rhport]); + } + } + usbip_dbg_vhci_rh(" bye\n"); + + spin_unlock(&dum->lock); + + return retval; +} + +static struct vhci_device *get_vdev(struct usb_device *udev) +{ + int i; + + if (!udev) + return NULL; + + for (i = 0; i < VHCI_NPORTS; i++) + if (the_controller->vdev[i].udev == udev) + return port_to_vdev(i); + + return NULL; +} + +static void vhci_tx_urb(struct urb *urb) +{ + struct vhci_device *vdev = get_vdev(urb->dev); + struct vhci_priv *priv; + + if (!vdev) { + pr_err("could not get virtual device"); + return; + } + + priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); + if (!priv) { + usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); + return; + } + + spin_lock(&vdev->priv_lock); + + priv->seqnum = atomic_inc_return(&the_controller->seqnum); + if (priv->seqnum == 0xffff) + dev_info(&urb->dev->dev, "seqnum max\n"); + + priv->vdev = vdev; + priv->urb = urb; + + urb->hcpriv = (void *) priv; + + list_add_tail(&priv->list, &vdev->priv_tx); + + wake_up(&vdev->waitq_tx); + spin_unlock(&vdev->priv_lock); +} + +static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct device *dev = &urb->dev->dev; + int ret = 0; + struct vhci_device *vdev; + + usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", + hcd, urb, mem_flags); + + /* patch to usb_sg_init() is in 2.5.60 */ + BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length); + + spin_lock(&the_controller->lock); + + if (urb->status != -EINPROGRESS) { + dev_err(dev, "URB already unlinked!, status %d\n", urb->status); + spin_unlock(&the_controller->lock); + return urb->status; + } + + vdev = port_to_vdev(urb->dev->portnum-1); + + /* refuse enqueue for dead connection */ + spin_lock(&vdev->ud.lock); + if (vdev->ud.status == VDEV_ST_NULL || + vdev->ud.status == VDEV_ST_ERROR) { + dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); + spin_unlock(&vdev->ud.lock); + spin_unlock(&the_controller->lock); + return -ENODEV; + } + spin_unlock(&vdev->ud.lock); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto no_need_unlink; + + /* + * The enumeration process is as follows; + * + * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0) + * to get max packet length of default pipe + * + * 2. Set_Address request to DevAddr(0) EndPoint(0) + * + */ + if (usb_pipedevice(urb->pipe) == 0) { + __u8 type = usb_pipetype(urb->pipe); + struct usb_ctrlrequest *ctrlreq = + (struct usb_ctrlrequest *) urb->setup_packet; + + if (type != PIPE_CONTROL || !ctrlreq) { + dev_err(dev, "invalid request to devnum 0\n"); + ret = -EINVAL; + goto no_need_xmit; + } + + switch (ctrlreq->bRequest) { + case USB_REQ_SET_ADDRESS: + /* set_address may come when a device is reset */ + dev_info(dev, "SetAddress Request (%d) to port %d\n", + ctrlreq->wValue, vdev->rhport); + + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); + + spin_lock(&vdev->ud.lock); + vdev->ud.status = VDEV_ST_USED; + spin_unlock(&vdev->ud.lock); + + if (urb->status == -EINPROGRESS) { + /* This request is successfully completed. */ + /* If not -EINPROGRESS, possibly unlinked. */ + urb->status = 0; + } + + goto no_need_xmit; + + case USB_REQ_GET_DESCRIPTOR: + if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) + usbip_dbg_vhci_hc( + "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); + + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); + goto out; + + default: + /* NOT REACHED */ + dev_err(dev, + "invalid request to devnum 0 bRequest %u, wValue %u\n", + ctrlreq->bRequest, + ctrlreq->wValue); + ret = -EINVAL; + goto no_need_xmit; + } + + } + +out: + vhci_tx_urb(urb); + spin_unlock(&the_controller->lock); + + return 0; + +no_need_xmit: + usb_hcd_unlink_urb_from_ep(hcd, urb); +no_need_unlink: + spin_unlock(&the_controller->lock); + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); + return ret; +} + +/* + * vhci_rx gives back the urb after receiving the reply of the urb. If an + * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives + * back its urb. For the driver unlinking the urb, the content of the urb is + * not important, but the calling to its completion handler is important; the + * completion of unlinking is notified by the completion handler. + * + * + * CLIENT SIDE + * + * - When vhci_hcd receives RET_SUBMIT, + * + * - case 1a). the urb of the pdu is not unlinking. + * - normal case + * => just give back the urb + * + * - case 1b). the urb of the pdu is unlinking. + * - usbip.ko will return a reply of the unlinking request. + * => give back the urb now and go to case 2b). + * + * - When vhci_hcd receives RET_UNLINK, + * + * - case 2a). a submit request is still pending in vhci_hcd. + * - urb was really pending in usbip.ko and urb_unlink_urb() was + * completed there. + * => free a pending submit request + * => notify unlink completeness by giving back the urb + * + * - case 2b). a submit request is *not* pending in vhci_hcd. + * - urb was already given back to the core driver. + * => do not give back the urb + * + * + * SERVER SIDE + * + * - When usbip receives CMD_UNLINK, + * + * - case 3a). the urb of the unlink request is now in submission. + * => do usb_unlink_urb(). + * => after the unlink is completed, send RET_UNLINK. + * + * - case 3b). the urb of the unlink request is not in submission. + * - may be already completed or never be received + * => send RET_UNLINK + * + */ +static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct vhci_priv *priv; + struct vhci_device *vdev; + + pr_info("dequeue a urb %p\n", urb); + + spin_lock(&the_controller->lock); + + priv = urb->hcpriv; + if (!priv) { + /* URB was never linked! or will be soon given back by + * vhci_rx. */ + spin_unlock(&the_controller->lock); + return 0; + } + + { + int ret = 0; + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) { + spin_unlock(&the_controller->lock); + return ret; + } + } + + /* send unlink request here? */ + vdev = priv->vdev; + + if (!vdev->ud.tcp_socket) { + /* tcp connection is closed */ + spin_lock(&vdev->priv_lock); + + pr_info("device %p seems to be disconnected\n", vdev); + list_del(&priv->list); + kfree(priv); + urb->hcpriv = NULL; + + spin_unlock(&vdev->priv_lock); + + /* + * If tcp connection is alive, we have sent CMD_UNLINK. + * vhci_rx will receive RET_UNLINK and give back the URB. + * Otherwise, we give back it here. + */ + pr_info("gives back urb %p\n", urb); + + usb_hcd_unlink_urb_from_ep(hcd, urb); + + spin_unlock(&the_controller->lock); + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, + urb->status); + spin_lock(&the_controller->lock); + + } else { + /* tcp connection is alive */ + struct vhci_unlink *unlink; + + spin_lock(&vdev->priv_lock); + + /* setup CMD_UNLINK pdu */ + unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); + if (!unlink) { + spin_unlock(&vdev->priv_lock); + spin_unlock(&the_controller->lock); + usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); + return -ENOMEM; + } + + unlink->seqnum = atomic_inc_return(&the_controller->seqnum); + if (unlink->seqnum == 0xffff) + pr_info("seqnum max\n"); + + unlink->unlink_seqnum = priv->seqnum; + + pr_info("device %p seems to be still connected\n", vdev); + + /* send cmd_unlink and try to cancel the pending URB in the + * peer */ + list_add_tail(&unlink->list, &vdev->unlink_tx); + wake_up(&vdev->waitq_tx); + + spin_unlock(&vdev->priv_lock); + } + + spin_unlock(&the_controller->lock); + + usbip_dbg_vhci_hc("leave\n"); + return 0; +} + +static void vhci_device_unlink_cleanup(struct vhci_device *vdev) +{ + struct vhci_unlink *unlink, *tmp; + + spin_lock(&the_controller->lock); + spin_lock(&vdev->priv_lock); + + list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { + pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum); + list_del(&unlink->list); + kfree(unlink); + } + + while (!list_empty(&vdev->unlink_rx)) { + struct urb *urb; + + unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink, + list); + + /* give back URB of unanswered unlink request */ + pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum); + + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + if (!urb) { + pr_info("the urb (seqnum %lu) was already given back\n", + unlink->unlink_seqnum); + list_del(&unlink->list); + kfree(unlink); + continue; + } + + urb->status = -ENODEV; + + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + + list_del(&unlink->list); + + spin_unlock(&vdev->priv_lock); + spin_unlock(&the_controller->lock); + + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, + urb->status); + + spin_lock(&the_controller->lock); + spin_lock(&vdev->priv_lock); + + kfree(unlink); + } + + spin_unlock(&vdev->priv_lock); + spin_unlock(&the_controller->lock); +} + +/* + * The important thing is that only one context begins cleanup. + * This is why error handling and cleanup become simple. + * We do not want to consider race condition as possible. + */ +static void vhci_shutdown_connection(struct usbip_device *ud) +{ + struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); + + /* need this? see stub_dev.c */ + if (ud->tcp_socket) { + pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket); + kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); + } + + /* kill threads related to this sdev */ + if (vdev->ud.tcp_rx) { + kthread_stop_put(vdev->ud.tcp_rx); + vdev->ud.tcp_rx = NULL; + } + if (vdev->ud.tcp_tx) { + kthread_stop_put(vdev->ud.tcp_tx); + vdev->ud.tcp_tx = NULL; + } + pr_info("stop threads\n"); + + /* active connection is closed */ + if (vdev->ud.tcp_socket) { + sockfd_put(vdev->ud.tcp_socket); + vdev->ud.tcp_socket = NULL; + } + pr_info("release socket\n"); + + vhci_device_unlink_cleanup(vdev); + + /* + * rh_port_disconnect() is a trigger of ... + * usb_disable_device(): + * disable all the endpoints for a USB device. + * usb_disable_endpoint(): + * disable endpoints. pending urbs are unlinked(dequeued). + * + * NOTE: After calling rh_port_disconnect(), the USB device drivers of a + * detached device should release used urbs in a cleanup function (i.e. + * xxx_disconnect()). Therefore, vhci_hcd does not need to release + * pushed urbs and their private data in this function. + * + * NOTE: vhci_dequeue() must be considered carefully. When shutting down + * a connection, vhci_shutdown_connection() expects vhci_dequeue() + * gives back pushed urbs and frees their private data by request of + * the cleanup function of a USB driver. When unlinking a urb with an + * active connection, vhci_dequeue() does not give back the urb which + * is actually given back by vhci_rx after receiving its return pdu. + * + */ + rh_port_disconnect(vdev->rhport); + + pr_info("disconnect device\n"); +} + + +static void vhci_device_reset(struct usbip_device *ud) +{ + struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); + + spin_lock(&ud->lock); + + vdev->speed = 0; + vdev->devid = 0; + + usb_put_dev(vdev->udev); + vdev->udev = NULL; + + if (ud->tcp_socket) { + sockfd_put(ud->tcp_socket); + ud->tcp_socket = NULL; + } + ud->status = VDEV_ST_NULL; + + spin_unlock(&ud->lock); +} + +static void vhci_device_unusable(struct usbip_device *ud) +{ + spin_lock(&ud->lock); + ud->status = VDEV_ST_ERROR; + spin_unlock(&ud->lock); +} + +static void vhci_device_init(struct vhci_device *vdev) +{ + memset(vdev, 0, sizeof(*vdev)); + + vdev->ud.side = USBIP_VHCI; + vdev->ud.status = VDEV_ST_NULL; + spin_lock_init(&vdev->ud.lock); + + INIT_LIST_HEAD(&vdev->priv_rx); + INIT_LIST_HEAD(&vdev->priv_tx); + INIT_LIST_HEAD(&vdev->unlink_tx); + INIT_LIST_HEAD(&vdev->unlink_rx); + spin_lock_init(&vdev->priv_lock); + + init_waitqueue_head(&vdev->waitq_tx); + + vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; + vdev->ud.eh_ops.reset = vhci_device_reset; + vdev->ud.eh_ops.unusable = vhci_device_unusable; + + usbip_start_eh(&vdev->ud); +} + +static int vhci_start(struct usb_hcd *hcd) +{ + struct vhci_hcd *vhci = hcd_to_vhci(hcd); + int rhport; + int err = 0; + + usbip_dbg_vhci_hc("enter vhci_start\n"); + + /* initialize private data of usb_hcd */ + + for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + struct vhci_device *vdev = &vhci->vdev[rhport]; + + vhci_device_init(vdev); + vdev->rhport = rhport; + } + + atomic_set(&vhci->seqnum, 0); + spin_lock_init(&vhci->lock); + + hcd->power_budget = 0; /* no limit */ + hcd->uses_new_polling = 1; + + /* vhci_hcd is now ready to be controlled through sysfs */ + err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group); + if (err) { + pr_err("create sysfs files\n"); + return err; + } + + return 0; +} + +static void vhci_stop(struct usb_hcd *hcd) +{ + struct vhci_hcd *vhci = hcd_to_vhci(hcd); + int rhport = 0; + + usbip_dbg_vhci_hc("stop VHCI controller\n"); + + /* 1. remove the userland interface of vhci_hcd */ + sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group); + + /* 2. shutdown all the ports of vhci_hcd */ + for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + struct vhci_device *vdev = &vhci->vdev[rhport]; + + usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); + usbip_stop_eh(&vdev->ud); + } +} + +static int vhci_get_frame_number(struct usb_hcd *hcd) +{ + pr_err("Not yet implemented\n"); + return 0; +} + +#ifdef CONFIG_PM + +/* FIXME: suspend/resume */ +static int vhci_bus_suspend(struct usb_hcd *hcd) +{ + struct vhci_hcd *vhci = hcd_to_vhci(hcd); + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock(&vhci->lock); + hcd->state = HC_STATE_SUSPENDED; + spin_unlock(&vhci->lock); + + return 0; +} + +static int vhci_bus_resume(struct usb_hcd *hcd) +{ + struct vhci_hcd *vhci = hcd_to_vhci(hcd); + int rc = 0; + + dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); + + spin_lock(&vhci->lock); + if (!HCD_HW_ACCESSIBLE(hcd)) + rc = -ESHUTDOWN; + else + hcd->state = HC_STATE_RUNNING; + spin_unlock(&vhci->lock); + + return rc; +} + +#else + +#define vhci_bus_suspend NULL +#define vhci_bus_resume NULL +#endif + +static struct hc_driver vhci_hc_driver = { + .description = driver_name, + .product_desc = driver_desc, + .hcd_priv_size = sizeof(struct vhci_hcd), + + .flags = HCD_USB2, + + .start = vhci_start, + .stop = vhci_stop, + + .urb_enqueue = vhci_urb_enqueue, + .urb_dequeue = vhci_urb_dequeue, + + .get_frame_number = vhci_get_frame_number, + + .hub_status_data = vhci_hub_status, + .hub_control = vhci_hub_control, + .bus_suspend = vhci_bus_suspend, + .bus_resume = vhci_bus_resume, +}; + +static int vhci_hcd_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + int ret; + + usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); + + /* + * Allocate and initialize hcd. + * Our private data is also allocated automatically. + */ + hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + pr_err("create hcd failed\n"); + return -ENOMEM; + } + hcd->has_tt = 1; + + /* this is private data for vhci_hcd */ + the_controller = hcd_to_vhci(hcd); + + /* + * Finish generic HCD structure initialization and register. + * Call the driver's reset() and start() routines. + */ + ret = usb_add_hcd(hcd, 0, 0); + if (ret != 0) { + pr_err("usb_add_hcd failed %d\n", ret); + usb_put_hcd(hcd); + the_controller = NULL; + return ret; + } + + usbip_dbg_vhci_hc("bye\n"); + return 0; +} + +static int vhci_hcd_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + + hcd = platform_get_drvdata(pdev); + if (!hcd) + return 0; + + /* + * Disconnects the root hub, + * then reverses the effects of usb_add_hcd(), + * invoking the HCD's stop() methods. + */ + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + the_controller = NULL; + + return 0; +} + +#ifdef CONFIG_PM + +/* what should happen for USB/IP under suspend/resume? */ +static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd; + int rhport = 0; + int connected = 0; + int ret = 0; + + hcd = platform_get_drvdata(pdev); + + spin_lock(&the_controller->lock); + + for (rhport = 0; rhport < VHCI_NPORTS; rhport++) + if (the_controller->port_status[rhport] & + USB_PORT_STAT_CONNECTION) + connected += 1; + + spin_unlock(&the_controller->lock); + + if (connected > 0) { + dev_info(&pdev->dev, + "We have %d active connection%s. Do not suspend.\n", + connected, (connected == 1 ? "" : "s")); + ret = -EBUSY; + } else { + dev_info(&pdev->dev, "suspend vhci_hcd"); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + } + + return ret; +} + +static int vhci_hcd_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + hcd = platform_get_drvdata(pdev); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + + return 0; +} + +#else + +#define vhci_hcd_suspend NULL +#define vhci_hcd_resume NULL + +#endif + +static struct platform_driver vhci_driver = { + .probe = vhci_hcd_probe, + .remove = vhci_hcd_remove, + .suspend = vhci_hcd_suspend, + .resume = vhci_hcd_resume, + .driver = { + .name = driver_name, + }, +}; + +/* + * The VHCI 'device' is 'virtual'; not a real plug&play hardware. + * We need to add this virtual device as a platform device arbitrarily: + * 1. platform_device_register() + */ +static void the_pdev_release(struct device *dev) +{ +} + +static struct platform_device the_pdev = { + /* should be the same name as driver_name */ + .name = driver_name, + .id = -1, + .dev = { + .release = the_pdev_release, + }, +}; + +static int __init vhci_hcd_init(void) +{ + int ret; + + if (usb_disabled()) + return -ENODEV; + + ret = platform_driver_register(&vhci_driver); + if (ret) + goto err_driver_register; + + ret = platform_device_register(&the_pdev); + if (ret) + goto err_platform_device_register; + + pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); + return ret; + +err_platform_device_register: + platform_driver_unregister(&vhci_driver); +err_driver_register: + return ret; +} + +static void __exit vhci_hcd_exit(void) +{ + platform_device_unregister(&the_pdev); + platform_driver_unregister(&vhci_driver); +} + +module_init(vhci_hcd_init); +module_exit(vhci_hcd_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(USBIP_VERSION); diff --git a/kernel/drivers/usb/usbip/vhci_rx.c b/kernel/drivers/usb/usbip/vhci_rx.c new file mode 100644 index 000000000..00e4a5430 --- /dev/null +++ b/kernel/drivers/usb/usbip/vhci_rx.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +#include "usbip_common.h" +#include "vhci.h" + +/* get URB from transmitted urb queue. caller must hold vdev->priv_lock */ +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) +{ + struct vhci_priv *priv, *tmp; + struct urb *urb = NULL; + int status; + + list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) { + if (priv->seqnum != seqnum) + continue; + + urb = priv->urb; + status = urb->status; + + usbip_dbg_vhci_rx("find urb %p vurb %p seqnum %u\n", + urb, priv, seqnum); + + switch (status) { + case -ENOENT: + /* fall through */ + case -ECONNRESET: + dev_info(&urb->dev->dev, + "urb %p was unlinked %ssynchronuously.\n", urb, + status == -ENOENT ? "" : "a"); + break; + case -EINPROGRESS: + /* no info output */ + break; + default: + dev_info(&urb->dev->dev, + "urb %p may be in a error, status %d\n", urb, + status); + } + + list_del(&priv->list); + kfree(priv); + urb->hcpriv = NULL; + + break; + } + + return urb; +} + +static void vhci_recv_ret_submit(struct vhci_device *vdev, + struct usbip_header *pdu) +{ + struct usbip_device *ud = &vdev->ud; + struct urb *urb; + + spin_lock(&vdev->priv_lock); + urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); + spin_unlock(&vdev->priv_lock); + + if (!urb) { + pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum); + pr_info("max seqnum %d\n", + atomic_read(&the_controller->seqnum)); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return; + } + + /* unpack the pdu to a urb */ + usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0); + + /* recv transfer buffer */ + if (usbip_recv_xbuff(ud, urb) < 0) + return; + + /* recv iso_packet_descriptor */ + if (usbip_recv_iso(ud, urb) < 0) + return; + + /* restore the padding in iso packets */ + usbip_pad_iso(ud, urb); + + if (usbip_dbg_flag_vhci_rx) + usbip_dump_urb(urb); + + usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + + spin_lock(&the_controller->lock); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + spin_unlock(&the_controller->lock); + + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); + + usbip_dbg_vhci_rx("Leave\n"); +} + +static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev, + struct usbip_header *pdu) +{ + struct vhci_unlink *unlink, *tmp; + + spin_lock(&vdev->priv_lock); + + list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) { + pr_info("unlink->seqnum %lu\n", unlink->seqnum); + if (unlink->seqnum == pdu->base.seqnum) { + usbip_dbg_vhci_rx("found pending unlink, %lu\n", + unlink->seqnum); + list_del(&unlink->list); + + spin_unlock(&vdev->priv_lock); + return unlink; + } + } + + spin_unlock(&vdev->priv_lock); + + return NULL; +} + +static void vhci_recv_ret_unlink(struct vhci_device *vdev, + struct usbip_header *pdu) +{ + struct vhci_unlink *unlink; + struct urb *urb; + + usbip_dump_header(pdu); + + unlink = dequeue_pending_unlink(vdev, pdu); + if (!unlink) { + pr_info("cannot find the pending unlink %u\n", + pdu->base.seqnum); + return; + } + + spin_lock(&vdev->priv_lock); + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + spin_unlock(&vdev->priv_lock); + + if (!urb) { + /* + * I get the result of a unlink request. But, it seems that I + * already received the result of its submit result and gave + * back the URB. + */ + pr_info("the urb (seqnum %d) was already given back\n", + pdu->base.seqnum); + } else { + usbip_dbg_vhci_rx("now giveback urb %p\n", urb); + + /* If unlink is successful, status is -ECONNRESET */ + urb->status = pdu->u.ret_unlink.status; + pr_info("urb->status %d\n", urb->status); + + spin_lock(&the_controller->lock); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + spin_unlock(&the_controller->lock); + + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, + urb->status); + } + + kfree(unlink); +} + +static int vhci_priv_tx_empty(struct vhci_device *vdev) +{ + int empty = 0; + + spin_lock(&vdev->priv_lock); + empty = list_empty(&vdev->priv_rx); + spin_unlock(&vdev->priv_lock); + + return empty; +} + +/* recv a pdu */ +static void vhci_rx_pdu(struct usbip_device *ud) +{ + int ret; + struct usbip_header pdu; + struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); + + usbip_dbg_vhci_rx("Enter\n"); + + memset(&pdu, 0, sizeof(pdu)); + + /* receive a pdu header */ + ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu)); + if (ret < 0) { + if (ret == -ECONNRESET) + pr_info("connection reset by peer\n"); + else if (ret == -EAGAIN) { + /* ignore if connection was idle */ + if (vhci_priv_tx_empty(vdev)) + return; + pr_info("connection timed out with pending urbs\n"); + } else if (ret != -ERESTARTSYS) + pr_info("xmit failed %d\n", ret); + + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return; + } + if (ret == 0) { + pr_info("connection closed"); + usbip_event_add(ud, VDEV_EVENT_DOWN); + return; + } + if (ret != sizeof(pdu)) { + pr_err("received pdu size is %d, should be %d\n", ret, + (unsigned int)sizeof(pdu)); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return; + } + + usbip_header_correct_endian(&pdu, 0); + + if (usbip_dbg_flag_vhci_rx) + usbip_dump_header(&pdu); + + switch (pdu.base.command) { + case USBIP_RET_SUBMIT: + vhci_recv_ret_submit(vdev, &pdu); + break; + case USBIP_RET_UNLINK: + vhci_recv_ret_unlink(vdev, &pdu); + break; + default: + /* NOT REACHED */ + pr_err("unknown pdu %u\n", pdu.base.command); + usbip_dump_header(&pdu); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + break; + } +} + +int vhci_rx_loop(void *data) +{ + struct usbip_device *ud = data; + + while (!kthread_should_stop()) { + if (usbip_event_happened(ud)) + break; + + vhci_rx_pdu(ud); + } + + return 0; +} diff --git a/kernel/drivers/usb/usbip/vhci_sysfs.c b/kernel/drivers/usb/usbip/vhci_sysfs.c new file mode 100644 index 000000000..211f43f67 --- /dev/null +++ b/kernel/drivers/usb/usbip/vhci_sysfs.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include +#include + +#include "usbip_common.h" +#include "vhci.h" + +/* TODO: refine locking ?*/ + +/* Sysfs entry to show port status */ +static ssize_t status_show(struct device *dev, struct device_attribute *attr, + char *out) +{ + char *s = out; + int i = 0; + + BUG_ON(!the_controller || !out); + + spin_lock(&the_controller->lock); + + /* + * output example: + * prt sta spd dev socket local_busid + * 000 004 000 000 c5a7bb80 1-2.3 + * 001 004 000 000 d8cee980 2-3.4 + * + * IP address can be retrieved from a socket pointer address by looking + * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a + * port number and its peer IP address. + */ + out += sprintf(out, + "prt sta spd bus dev socket local_busid\n"); + + for (i = 0; i < VHCI_NPORTS; i++) { + struct vhci_device *vdev = port_to_vdev(i); + + spin_lock(&vdev->ud.lock); + out += sprintf(out, "%03u %03u ", i, vdev->ud.status); + + if (vdev->ud.status == VDEV_ST_USED) { + out += sprintf(out, "%03u %08x ", + vdev->speed, vdev->devid); + out += sprintf(out, "%16p ", vdev->ud.tcp_socket); + out += sprintf(out, "%s", dev_name(&vdev->udev->dev)); + + } else { + out += sprintf(out, "000 000 000 0000000000000000 0-0"); + } + + out += sprintf(out, "\n"); + spin_unlock(&vdev->ud.lock); + } + + spin_unlock(&the_controller->lock); + + return out - s; +} +static DEVICE_ATTR_RO(status); + +/* Sysfs entry to shutdown a virtual connection */ +static int vhci_port_disconnect(__u32 rhport) +{ + struct vhci_device *vdev; + + usbip_dbg_vhci_sysfs("enter\n"); + + /* lock */ + spin_lock(&the_controller->lock); + + vdev = port_to_vdev(rhport); + + spin_lock(&vdev->ud.lock); + if (vdev->ud.status == VDEV_ST_NULL) { + pr_err("not connected %d\n", vdev->ud.status); + + /* unlock */ + spin_unlock(&vdev->ud.lock); + spin_unlock(&the_controller->lock); + + return -EINVAL; + } + + /* unlock */ + spin_unlock(&vdev->ud.lock); + spin_unlock(&the_controller->lock); + + usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN); + + return 0; +} + +static ssize_t store_detach(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int err; + __u32 rhport = 0; + + if (sscanf(buf, "%u", &rhport) != 1) + return -EINVAL; + + /* check rhport */ + if (rhport >= VHCI_NPORTS) { + dev_err(dev, "invalid port %u\n", rhport); + return -EINVAL; + } + + err = vhci_port_disconnect(rhport); + if (err < 0) + return -EINVAL; + + usbip_dbg_vhci_sysfs("Leave\n"); + + return count; +} +static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach); + +/* Sysfs entry to establish a virtual connection */ +static int valid_args(__u32 rhport, enum usb_device_speed speed) +{ + /* check rhport */ + if (rhport >= VHCI_NPORTS) { + pr_err("port %u\n", rhport); + return -EINVAL; + } + + /* check speed */ + switch (speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_WIRELESS: + break; + default: + pr_err("Failed attach request for unsupported USB speed: %s\n", + usb_speed_string(speed)); + return -EINVAL; + } + + return 0; +} + +/* + * To start a new USB/IP attachment, a userland program needs to setup a TCP + * connection and then write its socket descriptor with remote device + * information into this sysfs file. + * + * A remote device is virtually attached to the root-hub port of @rhport with + * @speed. @devid is embedded into a request to specify the remote device in a + * server host. + * + * write() returns 0 on success, else negative errno. + */ +static ssize_t store_attach(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct vhci_device *vdev; + struct socket *socket; + int sockfd = 0; + __u32 rhport = 0, devid = 0, speed = 0; + int err; + + /* + * @rhport: port number of vhci_hcd + * @sockfd: socket descriptor of an established TCP connection + * @devid: unique device identifier in a remote host + * @speed: usb device speed in a remote host + */ + if (sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed) != 4) + return -EINVAL; + + usbip_dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n", + rhport, sockfd, devid, speed); + + /* check received parameters */ + if (valid_args(rhport, speed) < 0) + return -EINVAL; + + /* Extract socket from fd. */ + socket = sockfd_lookup(sockfd, &err); + if (!socket) + return -EINVAL; + + /* now need lock until setting vdev status as used */ + + /* begin a lock */ + spin_lock(&the_controller->lock); + vdev = port_to_vdev(rhport); + spin_lock(&vdev->ud.lock); + + if (vdev->ud.status != VDEV_ST_NULL) { + /* end of the lock */ + spin_unlock(&vdev->ud.lock); + spin_unlock(&the_controller->lock); + + sockfd_put(socket); + + dev_err(dev, "port %d already used\n", rhport); + return -EINVAL; + } + + dev_info(dev, + "rhport(%u) sockfd(%d) devid(%u) speed(%u) speed_str(%s)\n", + rhport, sockfd, devid, speed, usb_speed_string(speed)); + + vdev->devid = devid; + vdev->speed = speed; + vdev->ud.tcp_socket = socket; + vdev->ud.status = VDEV_ST_NOTASSIGNED; + + spin_unlock(&vdev->ud.lock); + spin_unlock(&the_controller->lock); + /* end the lock */ + + vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx"); + vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx"); + + rh_port_connect(rhport, speed); + + return count; +} +static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach); + +static struct attribute *dev_attrs[] = { + &dev_attr_status.attr, + &dev_attr_detach.attr, + &dev_attr_attach.attr, + &dev_attr_usbip_debug.attr, + NULL, +}; + +const struct attribute_group dev_attr_group = { + .attrs = dev_attrs, +}; diff --git a/kernel/drivers/usb/usbip/vhci_tx.c b/kernel/drivers/usb/usbip/vhci_tx.c new file mode 100644 index 000000000..409fd99f3 --- /dev/null +++ b/kernel/drivers/usb/usbip/vhci_tx.c @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2003-2008 Takahiro Hirofuchi + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + */ + +#include +#include + +#include "usbip_common.h" +#include "vhci.h" + +static void setup_cmd_submit_pdu(struct usbip_header *pdup, struct urb *urb) +{ + struct vhci_priv *priv = ((struct vhci_priv *)urb->hcpriv); + struct vhci_device *vdev = priv->vdev; + + usbip_dbg_vhci_tx("URB, local devnum %u, remote devid %u\n", + usb_pipedevice(urb->pipe), vdev->devid); + + pdup->base.command = USBIP_CMD_SUBMIT; + pdup->base.seqnum = priv->seqnum; + pdup->base.devid = vdev->devid; + pdup->base.direction = usb_pipein(urb->pipe) ? + USBIP_DIR_IN : USBIP_DIR_OUT; + pdup->base.ep = usb_pipeendpoint(urb->pipe); + + usbip_pack_pdu(pdup, urb, USBIP_CMD_SUBMIT, 1); + + if (urb->setup_packet) + memcpy(pdup->u.cmd_submit.setup, urb->setup_packet, 8); +} + +static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev) +{ + struct vhci_priv *priv, *tmp; + + spin_lock(&vdev->priv_lock); + + list_for_each_entry_safe(priv, tmp, &vdev->priv_tx, list) { + list_move_tail(&priv->list, &vdev->priv_rx); + spin_unlock(&vdev->priv_lock); + return priv; + } + + spin_unlock(&vdev->priv_lock); + + return NULL; +} + +static int vhci_send_cmd_submit(struct vhci_device *vdev) +{ + struct vhci_priv *priv = NULL; + + struct msghdr msg; + struct kvec iov[3]; + size_t txsize; + + size_t total_size = 0; + + while ((priv = dequeue_from_priv_tx(vdev)) != NULL) { + int ret; + struct urb *urb = priv->urb; + struct usbip_header pdu_header; + struct usbip_iso_packet_descriptor *iso_buffer = NULL; + + txsize = 0; + memset(&pdu_header, 0, sizeof(pdu_header)); + memset(&msg, 0, sizeof(msg)); + memset(&iov, 0, sizeof(iov)); + + usbip_dbg_vhci_tx("setup txdata urb %p\n", urb); + + /* 1. setup usbip_header */ + setup_cmd_submit_pdu(&pdu_header, urb); + usbip_header_correct_endian(&pdu_header, 1); + + iov[0].iov_base = &pdu_header; + iov[0].iov_len = sizeof(pdu_header); + txsize += sizeof(pdu_header); + + /* 2. setup transfer buffer */ + if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) { + iov[1].iov_base = urb->transfer_buffer; + iov[1].iov_len = urb->transfer_buffer_length; + txsize += urb->transfer_buffer_length; + } + + /* 3. setup iso_packet_descriptor */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + ssize_t len = 0; + + iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len); + if (!iso_buffer) { + usbip_event_add(&vdev->ud, + SDEV_EVENT_ERROR_MALLOC); + return -1; + } + + iov[2].iov_base = iso_buffer; + iov[2].iov_len = len; + txsize += len; + } + + ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize); + if (ret != txsize) { + pr_err("sendmsg failed!, ret=%d for %zd\n", ret, + txsize); + kfree(iso_buffer); + usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP); + return -1; + } + + kfree(iso_buffer); + usbip_dbg_vhci_tx("send txdata\n"); + + total_size += txsize; + } + + return total_size; +} + +static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev) +{ + struct vhci_unlink *unlink, *tmp; + + spin_lock(&vdev->priv_lock); + + list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { + list_move_tail(&unlink->list, &vdev->unlink_rx); + spin_unlock(&vdev->priv_lock); + return unlink; + } + + spin_unlock(&vdev->priv_lock); + + return NULL; +} + +static int vhci_send_cmd_unlink(struct vhci_device *vdev) +{ + struct vhci_unlink *unlink = NULL; + + struct msghdr msg; + struct kvec iov[3]; + size_t txsize; + + size_t total_size = 0; + + while ((unlink = dequeue_from_unlink_tx(vdev)) != NULL) { + int ret; + struct usbip_header pdu_header; + + txsize = 0; + memset(&pdu_header, 0, sizeof(pdu_header)); + memset(&msg, 0, sizeof(msg)); + memset(&iov, 0, sizeof(iov)); + + usbip_dbg_vhci_tx("setup cmd unlink, %lu\n", unlink->seqnum); + + /* 1. setup usbip_header */ + pdu_header.base.command = USBIP_CMD_UNLINK; + pdu_header.base.seqnum = unlink->seqnum; + pdu_header.base.devid = vdev->devid; + pdu_header.base.ep = 0; + pdu_header.u.cmd_unlink.seqnum = unlink->unlink_seqnum; + + usbip_header_correct_endian(&pdu_header, 1); + + iov[0].iov_base = &pdu_header; + iov[0].iov_len = sizeof(pdu_header); + txsize += sizeof(pdu_header); + + ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 1, txsize); + if (ret != txsize) { + pr_err("sendmsg failed!, ret=%d for %zd\n", ret, + txsize); + usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP); + return -1; + } + + usbip_dbg_vhci_tx("send txdata\n"); + + total_size += txsize; + } + + return total_size; +} + +int vhci_tx_loop(void *data) +{ + struct usbip_device *ud = data; + struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); + + while (!kthread_should_stop()) { + if (vhci_send_cmd_submit(vdev) < 0) + break; + + if (vhci_send_cmd_unlink(vdev) < 0) + break; + + wait_event_interruptible(vdev->waitq_tx, + (!list_empty(&vdev->priv_tx) || + !list_empty(&vdev->unlink_tx) || + kthread_should_stop())); + + usbip_dbg_vhci_tx("pending urbs ?, now wake up\n"); + } + + return 0; +} -- cgit 1.2.3-korg