From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/tty/serial/8250/8250.h | 213 + kernel/drivers/tty/serial/8250/8250_accent.c | 45 + kernel/drivers/tty/serial/8250/8250_acorn.c | 141 + kernel/drivers/tty/serial/8250/8250_boca.c | 59 + kernel/drivers/tty/serial/8250/8250_core.c | 4086 ++++++++++++++ kernel/drivers/tty/serial/8250/8250_dma.c | 259 + kernel/drivers/tty/serial/8250/8250_dw.c | 649 +++ kernel/drivers/tty/serial/8250/8250_early.c | 154 + kernel/drivers/tty/serial/8250/8250_em.c | 170 + .../drivers/tty/serial/8250/8250_exar_st16c554.c | 50 + kernel/drivers/tty/serial/8250/8250_fintek.c | 240 + kernel/drivers/tty/serial/8250/8250_fourport.c | 51 + kernel/drivers/tty/serial/8250/8250_fsl.c | 62 + kernel/drivers/tty/serial/8250/8250_gsc.c | 129 + kernel/drivers/tty/serial/8250/8250_hp300.c | 322 ++ kernel/drivers/tty/serial/8250/8250_hub6.c | 56 + kernel/drivers/tty/serial/8250/8250_mtk.c | 294 + kernel/drivers/tty/serial/8250/8250_omap.c | 1408 +++++ kernel/drivers/tty/serial/8250/8250_pci.c | 5724 ++++++++++++++++++++ kernel/drivers/tty/serial/8250/8250_pnp.c | 534 ++ kernel/drivers/tty/serial/8250/Kconfig | 344 ++ kernel/drivers/tty/serial/8250/Makefile | 25 + kernel/drivers/tty/serial/8250/serial_cs.c | 856 +++ 23 files changed, 15871 insertions(+) create mode 100644 kernel/drivers/tty/serial/8250/8250.h create mode 100644 kernel/drivers/tty/serial/8250/8250_accent.c create mode 100644 kernel/drivers/tty/serial/8250/8250_acorn.c create mode 100644 kernel/drivers/tty/serial/8250/8250_boca.c create mode 100644 kernel/drivers/tty/serial/8250/8250_core.c create mode 100644 kernel/drivers/tty/serial/8250/8250_dma.c create mode 100644 kernel/drivers/tty/serial/8250/8250_dw.c create mode 100644 kernel/drivers/tty/serial/8250/8250_early.c create mode 100644 kernel/drivers/tty/serial/8250/8250_em.c create mode 100644 kernel/drivers/tty/serial/8250/8250_exar_st16c554.c create mode 100644 kernel/drivers/tty/serial/8250/8250_fintek.c create mode 100644 kernel/drivers/tty/serial/8250/8250_fourport.c create mode 100644 kernel/drivers/tty/serial/8250/8250_fsl.c create mode 100644 kernel/drivers/tty/serial/8250/8250_gsc.c create mode 100644 kernel/drivers/tty/serial/8250/8250_hp300.c create mode 100644 kernel/drivers/tty/serial/8250/8250_hub6.c create mode 100644 kernel/drivers/tty/serial/8250/8250_mtk.c create mode 100644 kernel/drivers/tty/serial/8250/8250_omap.c create mode 100644 kernel/drivers/tty/serial/8250/8250_pci.c create mode 100644 kernel/drivers/tty/serial/8250/8250_pnp.c create mode 100644 kernel/drivers/tty/serial/8250/Kconfig create mode 100644 kernel/drivers/tty/serial/8250/Makefile create mode 100644 kernel/drivers/tty/serial/8250/serial_cs.c (limited to 'kernel/drivers/tty/serial/8250') diff --git a/kernel/drivers/tty/serial/8250/8250.h b/kernel/drivers/tty/serial/8250/8250.h new file mode 100644 index 000000000..c43f74c53 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250.h @@ -0,0 +1,213 @@ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include + +struct uart_8250_dma { + int (*tx_dma)(struct uart_8250_port *p); + int (*rx_dma)(struct uart_8250_port *p, unsigned int iir); + + /* Filter function */ + dma_filter_fn fn; + /* Parameter to the filter function */ + void *rx_param; + void *tx_param; + + struct dma_slave_config rxconf; + struct dma_slave_config txconf; + + struct dma_chan *rxchan; + struct dma_chan *txchan; + + dma_addr_t rx_addr; + dma_addr_t tx_addr; + + dma_cookie_t rx_cookie; + dma_cookie_t tx_cookie; + + void *rx_buf; + + size_t rx_size; + size_t tx_size; + + unsigned char tx_running:1; + unsigned char tx_err: 1; + unsigned char rx_running:1; +}; + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + upf_t flags; + unsigned char hub6; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; + unsigned long irqflags; +}; + +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ +#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ +#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ + +#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ +#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +static inline int serial_in(struct uart_8250_port *up, int offset) +{ + return up->port.serial_in(&up->port, offset); +} + +static inline void serial_out(struct uart_8250_port *up, int offset, int value) +{ + up->port.serial_out(&up->port, offset, value); +} + +void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); + +static inline int serial_dl_read(struct uart_8250_port *up) +{ + return up->dl_read(up); +} + +static inline void serial_dl_write(struct uart_8250_port *up, int value) +{ + up->dl_write(up, value); +} + +struct uart_8250_port *serial8250_get_port(int line); +void serial8250_rpm_get(struct uart_8250_port *p); +void serial8250_rpm_put(struct uart_8250_port *p); + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif + +#ifdef CONFIG_SERIAL_8250_PNP +int serial8250_pnp_init(void); +void serial8250_pnp_exit(void); +#else +static inline int serial8250_pnp_init(void) { return 0; } +static inline void serial8250_pnp_exit(void) { } +#endif + +#ifdef CONFIG_ARCH_OMAP1 +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + int res; + + switch (pt->port.mapbase) { + case OMAP1_UART1_BASE: + case OMAP1_UART2_BASE: + case OMAP1_UART3_BASE: + res = 1; + break; + default: + res = 0; + break; + } + + return res; +} + +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + if (!cpu_is_omap1510()) + return 0; + + return is_omap1_8250(pt); +} +#else +static inline int is_omap1_8250(struct uart_8250_port *pt) +{ + return 0; +} +static inline int is_omap1510_8250(struct uart_8250_port *pt) +{ + return 0; +} +#endif + +#ifdef CONFIG_SERIAL_8250_DMA +extern int serial8250_tx_dma(struct uart_8250_port *); +extern int serial8250_rx_dma(struct uart_8250_port *, unsigned int iir); +extern int serial8250_request_dma(struct uart_8250_port *); +extern void serial8250_release_dma(struct uart_8250_port *); +#else +static inline int serial8250_tx_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) +{ + return -1; +} +static inline int serial8250_request_dma(struct uart_8250_port *p) +{ + return -1; +} +static inline void serial8250_release_dma(struct uart_8250_port *p) { } +#endif + +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_out(up, 0x04, status); + } + return 1; +} diff --git a/kernel/drivers/tty/serial/8250/8250_accent.c b/kernel/drivers/tty/serial/8250/8250_accent.c new file mode 100644 index 000000000..34b51c651 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_accent.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port accent_data[] = { + PORT(0x330, 4), + PORT(0x338, 4), + { }, +}; + +static struct platform_device accent_device = { + .name = "serial8250", + .id = PLAT8250_DEV_ACCENT, + .dev = { + .platform_data = accent_data, + }, +}; + +static int __init accent_init(void) +{ + return platform_device_register(&accent_device); +} + +module_init(accent_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_acorn.c b/kernel/drivers/tty/serial/8250/8250_acorn.c new file mode 100644 index 000000000..549aa07c0 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_acorn.c @@ -0,0 +1,141 @@ +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; + void __iomem *vaddr; +}; + +static int +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_8250_port uart; + unsigned long bus_addr; + unsigned int i; + + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + info->vaddr = ecardm_iomap(ec, type->type, 0, 0); + if (!info->vaddr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&uart, 0, sizeof(struct uart_8250_port)); + uart.port.irq = ec->irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = type->uartclk; + uart.port.iotype = UPIO_MEM; + uart.port.regshift = 2; + uart.port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i ++) { + uart.port.membase = info->vaddr + type->offset[i]; + uart.port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_8250_port(&uart); + } + + return 0; +} + +static void serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = serial_card_remove, + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/kernel/drivers/tty/serial/8250/8250_boca.c b/kernel/drivers/tty/serial/8250/8250_boca.c new file mode 100644 index 000000000..d125dc107 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_boca.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port boca_data[] = { + PORT(0x100, 12), + PORT(0x108, 12), + PORT(0x110, 12), + PORT(0x118, 12), + PORT(0x120, 12), + PORT(0x128, 12), + PORT(0x130, 12), + PORT(0x138, 12), + PORT(0x140, 12), + PORT(0x148, 12), + PORT(0x150, 12), + PORT(0x158, 12), + PORT(0x160, 12), + PORT(0x168, 12), + PORT(0x170, 12), + PORT(0x178, 12), + { }, +}; + +static struct platform_device boca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_BOCA, + .dev = { + .platform_data = boca_data, + }, +}; + +static int __init boca_init(void) +{ + return platform_device_register(&boca_device); +} + +module_init(boca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_core.c b/kernel/drivers/tty/serial/8250/8250_core.c new file mode 100644 index 000000000..822a2e197 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_core.c @@ -0,0 +1,4086 @@ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ + +#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SPARC +#include +#endif + +#include +#include + +#include "8250.h" + +/* + * Configuration: + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +static struct uart_driver serial8250_reg; + +static int serial_index(struct uart_port *port) +{ + return port->minor - 64; +} + +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +/* + * On -rt we can have a more delays, and legitimately + * so - so don't drop work spuriously and spam the + * syslog: + */ +#ifdef CONFIG_PREEMPT_RT_FULL +# define PASS_LIMIT 1000000 +#else +# define PASS_LIMIT 512 +#endif + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define CONFIG_SERIAL_DETECT_IRQ 1 +#endif +#ifdef CONFIG_SERIAL_8250_MANY_PORTS +#define CONFIG_SERIAL_MANY_PORTS 1 +#endif + +/* + * HUB6 is always on. This will be removed once the header + * files have been cleaned. + */ +#define CONFIG_HUB6 1 + +#include +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct irq_info { + struct hlist_node node; + int irq; + spinlock_t lock; /* Protects list not the hash */ + struct list_head *head; +}; + +#define NR_IRQ_HASH 32 /* Can be adjusted later */ +static struct hlist_head irq_lists[NR_IRQ_HASH]; +static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .rxtrig_bytes = {8, 16, 24, 28}, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .rxtrig_bytes = {1, 16, 32, 56}, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .rxtrig_bytes = {8, 16, 56, 60}, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE, + }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_TEGRA] = { + .name = "Tegra", + .fifo_size = 32, + .tx_loadsz = 8, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_01, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_RTOIE, + }, + [PORT_XR17D15X] = { + .name = "XR17D15X", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, + [PORT_XR17V35X] = { + .name = "XR17V35X", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 | + UART_FCR_T_TRIG_11, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, + [PORT_LPC3220] = { + .name = "LPC3220", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO, + }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, + [PORT_8250_CIR] = { + .name = "CIR port" + }, + [PORT_ALTR_16550_F32] = { + .name = "Altera 16550 FIFO32", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F64] = { + .name = "Altera 16550 FIFO64", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F128] = { + .name = "Altera 16550 FIFO128", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, +/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement +workaround of errata A-008006 which states that tx_loadsz should be +configured less than Maximum supported fifo bytes */ + [PORT_16550A_FSL64] = { + .name = "16550A_FSL64", + .fifo_size = 64, + .tx_loadsz = 63, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO, + }, +}; + +/* Uart divisor latch read */ +static int default_serial_dl_read(struct uart_8250_port *up) +{ + return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static void default_serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_DLL, value & 0xff); + serial_out(up, UART_DLM, value >> 8 & 0xff); +} + +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) + +/* Au1x00/RT288x UART hardware has a weird register layout */ +static const s8 au_io_in_map[8] = { + 0, /* UART_RX */ + 2, /* UART_IER */ + 3, /* UART_IIR */ + 5, /* UART_LCR */ + 6, /* UART_MCR */ + 7, /* UART_LSR */ + 8, /* UART_MSR */ + -1, /* UART_SCR (unmapped) */ +}; + +static const s8 au_io_out_map[8] = { + 1, /* UART_TX */ + 2, /* UART_IER */ + 4, /* UART_FCR */ + 5, /* UART_LCR */ + 6, /* UART_MCR */ + -1, /* UART_LSR (unmapped) */ + -1, /* UART_MSR (unmapped) */ + -1, /* UART_SCR (unmapped) */ +}; + +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + if (offset >= ARRAY_SIZE(au_io_in_map)) + return UINT_MAX; + offset = au_io_in_map[offset]; + if (offset < 0) + return UINT_MAX; + return __raw_readl(p->membase + (offset << p->regshift)); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + if (offset >= ARRAY_SIZE(au_io_out_map)) + return; + offset = au_io_out_map[offset]; + if (offset < 0) + return; + __raw_writel(value, p->membase + (offset << p->regshift)); +} + +/* Au1x00 haven't got a standard divisor latch */ +static int au_serial_dl_read(struct uart_8250_port *up) +{ + return __raw_readl(up->port.membase + 0x28); +} + +static void au_serial_dl_write(struct uart_8250_port *up, int value) +{ + __raw_writel(value, up->port.membase + 0x28); +} + +#endif + +static unsigned int hub6_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} + +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readb(p->membase + offset); +} + +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readl(p->membase + offset); +} + +static void mem32be_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + iowrite32be(value, p->membase + offset); +} + +static unsigned int mem32be_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return ioread32be(p->membase + offset); +} + +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + outb(value, p->iobase + offset); +} + +static int serial8250_default_handle_irq(struct uart_port *port); +static int exar_handle_irq(struct uart_port *port); + +static void set_io_from_upio(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + + up->dl_read = default_serial_dl_read; + up->dl_write = default_serial_dl_write; + + switch (p->iotype) { + case UPIO_HUB6: + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; + break; + + case UPIO_MEM: + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; + break; + + case UPIO_MEM32: + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; + break; + + case UPIO_MEM32BE: + p->serial_in = mem32be_serial_in; + p->serial_out = mem32be_serial_out; + break; + +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + up->dl_read = au_serial_dl_read; + up->dl_write = au_serial_dl_write; + break; +#endif + + default: + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; + } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; + p->handle_irq = serial8250_default_handle_irq; +} + +static void +serial_port_out_sync(struct uart_port *p, int offset, int value) +{ + switch (p->iotype) { + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_AU: + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ + break; + default: + p->serial_out(p, offset, value); + } +} + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +/* + * FIFO support. + */ +static void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(p, UART_FCR, 0); + } +} + +void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p) +{ + serial8250_clear_fifos(p); + serial_out(p, UART_FCR, p->fcr); +} +EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos); + +void serial8250_rpm_get(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_get_sync(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_get); + +void serial8250_rpm_put(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} +EXPORT_SYMBOL_GPL(serial8250_rpm_put); + +/* + * These two wrappers ensure that enable_runtime_pm_tx() can be called more than + * once and disable_runtime_pm_tx() will still disable RPM because the fifo is + * empty and the HW can idle again. + */ +static void serial8250_rpm_get_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 1); + if (rpm_active) + return; + pm_runtime_get_sync(p->port.dev); +} + +static void serial8250_rpm_put_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 0); + if (!rpm_active) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + unsigned char lcr = 0, efr = 0; + /* + * Exar UARTs have a SLEEP register that enables or disables + * each UART to enter sleep mode separately. On the XR17V35x the + * register is accessible to each UART at the UART_EXAR_SLEEP + * offset but the UART channel may only write to the corresponding + * bit. + */ + serial8250_rpm_get(p); + if ((p->port.type == PORT_XR17V35X) || + (p->port.type == PORT_XR17D15X)) { + serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0); + goto out; + } + + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + lcr = serial_in(p, UART_LCR); + efr = serial_in(p, UART_EFR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, UART_EFR_ECB); + serial_out(p, UART_LCR, 0); + } + serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(p, UART_EFR, efr); + serial_out(p, UART_LCR, lcr); + } + } +out: + serial8250_rpm_put(p); +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_in(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_out(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_in(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_in(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; + int count; + + old_lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, 0); + old_fcr = serial_in(up, UART_FCR); + old_mcr = serial_in(up, UART_MCR); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_MCR, UART_MCR_LOOP); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); + serial_out(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_out(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_in(up, UART_RX); + serial_out(up, UART_FCR, old_fcr); + serial_out(up, UART_MCR, old_mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_dl_write(up, old_dl); + serial_out(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_dll, old_dlm, old_lcr; + unsigned int id; + + old_lcr = serial_in(p, UART_LCR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); + + old_dll = serial_in(p, UART_DLL); + old_dlm = serial_in(p, UART_DLM); + + serial_out(p, UART_DLL, 0); + serial_out(p, UART_DLM, 0); + + id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8; + + serial_out(p, UART_DLL, old_dll); + serial_out(p, UART_DLM, old_dlm); + serial_out(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_out(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + /* + * XR17V35x UARTs have an extra divisor register, DLD + * that gets enabled with when DLAB is set which will + * cause the device to incorrectly match and assign + * port type to PORT_16650. The EFR for this UART is + * found at offset 0x09. Instead check the Deice ID (DVID) + * register for a 2, 4 or 8 port UART. + */ + if (up->port.flags & UPF_EXAR_EFR) { + status1 = serial_in(up, UART_EXAR_DVID); + if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) { + DEBUG_AUTOCONF("Exar XR17V35x "); + up->port.type = PORT_XR17V35X; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP; + + return; + } + + } + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + if (serial_in(up, UART_EFR) == 0) { + serial_out(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, 0); + serial_out(up, UART_LCR, 0); + + if (status1 == 7) + up->port.type = PORT_16550A_FSL64; + else + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_out(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + */ + serial_out(up, UART_LCR, 0); + status1 = serial_in(up, UART_MCR); + serial_out(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_out(up, UART_LCR, 0); + serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_out(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_out(up, UART_LCR, 0); + serial_out(up, UART_MCR, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { + unsigned short quot; + + serial_out(up, UART_LCR, 0xE0); + + quot = serial_dl_read(up); + quot <<= 3; + + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); + + serial_out(up, UART_LCR, 0); + + up->port.uartclk = 921600*16; + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_out(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_out(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_out(up, UART_IER, iersave); + + /* + * Exar uarts have EFR in a weird location + */ + if (up->port.flags & UPF_EXAR_EFR) { + DEBUG_AUTOCONF("Exar XR17D15x "); + up->port.type = PORT_XR17D15X; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP; + + return; + } + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int old_capabilities; + + if (!port->iobase && !port->mapbase && !port->membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", + serial_index(port), port->iobase, port->membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&port->lock, flags); + + up->capabilities = 0; + up->bugs = 0; + + if (!(port->flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_in(up, UART_IER) & 0x0f; + serial_out(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(port->flags & UPF_SKIP_TEST)) { + serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_in(up, UART_MSR) & 0xF0; + serial_out(up, UART_MCR, save_mcr); + if (status1 != 0x90) { + spin_unlock_irqrestore(&port->lock, flags); + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if it's 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + + switch (scratch) { + case 0: + autoconfig_8250(up); + break; + case 1: + port->type = PORT_UNKNOWN; + break; + case 2: + port->type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (port->type == PORT_16550A && up->probe & UART_PROBE_RSA && + __enable_rsa(up)) + port->type = PORT_RSA; +#endif + + serial_out(up, UART_LCR, save_lcr); + + port->fifosize = uart_config[up->port.type].fifo_size; + old_capabilities = up->capabilities; + up->capabilities = uart_config[port->type].flags; + up->tx_loadsz = uart_config[port->type].tx_loadsz; + + if (port->type == PORT_UNKNOWN) + goto out_lock; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (port->type == PORT_RSA) + serial_out(up, UART_RSA_FRR, 0); +#endif + serial_out(up, UART_MCR, save_mcr); + serial8250_clear_fifos(up); + serial_in(up, UART_RX); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + +out_lock: + spin_unlock_irqrestore(&port->lock, flags); + if (up->capabilities != old_capabilities) { + printk(KERN_WARNING + "ttyS%d: detected caps %08x should be %08x\n", + serial_index(port), old_capabilities, + up->capabilities); + } +out: + DEBUG_AUTOCONF("iir=%d ", scratch); + DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (port->flags & UPF_FOURPORT) { + ICP = (port->iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + inb_p(ICP); + } + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_in(up, UART_MCR); + save_ier = serial_in(up, UART_IER); + serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_out(up, UART_MCR, 0); + udelay(10); + if (port->flags & UPF_FOURPORT) { + serial_out(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS); + } else { + serial_out(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_out(up, UART_IER, 0x0f); /* enable all intrs */ + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); + serial_in(up, UART_MSR); + serial_out(up, UART_TX, 0xFF); + udelay(20); + irq = probe_irq_off(irqs); + + serial_out(up, UART_MCR, save_mcr); + serial_out(up, UART_IER, save_ier); + + if (port->flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + port->irq = (irq > 0) ? irq : 0; +} + +static inline void __stop_tx(struct uart_8250_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + serial8250_rpm_put_tx(p); + } +} + +static void serial8250_stop_tx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (port->type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } + serial8250_rpm_put(up); +} + +static void serial8250_start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get_tx(up); + + if (up->dma && !up->dma->tx_dma(up)) + return; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_port_out(port, UART_IER, up->ier); + + if (up->bugs & UART_BUG_TXEN) { + unsigned char lsr; + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + } + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + up->port.read_status_mask &= ~UART_LSR_DR; + serial_port_out(port, UART_IER, up->ier); + + serial8250_rpm_put(up); +} + +static void serial8250_disable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + up->ier &= ~UART_IER_MSI; + serial_port_out(port, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + up->ier |= UART_IER_MSI; + + serial8250_rpm_get(up); + serial_port_out(port, UART_IER, up->ier); + serial8250_rpm_put(up); +} + +/* + * serial8250_rx_chars: processes according to the passed in LSR + * value, and returns the remaining LSR bits not handled + * by this Rx routine. + */ +unsigned char +serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) +{ + struct uart_port *port = &up->port; + unsigned char ch; + int max_count = 256; + char flag; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_in(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + + flag = TTY_NORMAL; + port->icount.rx++; + + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) + port->icount.parity++; + else if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= port->read_status_mask; + + if (lsr & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); + +ignore_char: + lsr = serial_in(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0)); + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); + return lsr; +} +EXPORT_SYMBOL_GPL(serial8250_rx_chars); + +void serial8250_tx_chars(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + serial_out(up, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_tx_stopped(port)) { + serial8250_stop_tx(port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + DEBUG_INTR("THRE..."); + + /* + * With RPM enabled, we have to wait until the FIFO is empty before the + * HW can go idle. So we get here once again with empty FIFO and disable + * the interrupt and RPM in __stop_tx() + */ + if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) + __stop_tx(up); +} +EXPORT_SYMBOL_GPL(serial8250_tx_chars); + +/* Caller holds uart port lock */ +unsigned int serial8250_modem_status(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + unsigned int status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + port->state != NULL) { + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(port, status & UART_MSR_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + return status; +} +EXPORT_SYMBOL_GPL(serial8250_modem_status); + +/* + * This handles the interrupt from one port. + */ +int serial8250_handle_irq(struct uart_port *port, unsigned int iir) +{ + unsigned char status; + unsigned long flags; + struct uart_8250_port *up = up_to_u8250p(port); + int dma_err = 0; + + if (iir & UART_IIR_NO_INT) + return 0; + + spin_lock_irqsave(&port->lock, flags); + + status = serial_port_in(port, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & (UART_LSR_DR | UART_LSR_BI)) { + if (up->dma) + dma_err = up->dma->rx_dma(up, iir); + + if (!up->dma || dma_err) + status = serial8250_rx_chars(up, status); + } + serial8250_modem_status(up); + if ((!up->dma || (up->dma && up->dma->tx_err)) && + (status & UART_LSR_THRE)) + serial8250_tx_chars(up); + + spin_unlock_irqrestore(&port->lock, flags); + return 1; +} +EXPORT_SYMBOL_GPL(serial8250_handle_irq); + +static int serial8250_default_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir; + int ret; + + serial8250_rpm_get(up); + + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + + serial8250_rpm_put(up); + return ret; +} + +/* + * These Exar UARTs have an extra interrupt indicator that could + * fire for a few unimplemented interrupts. One of which is a + * wakeup event when coming out of sleep. Put this here just + * to be on the safe side that these interrupts don't go unhandled. + */ +static int exar_handle_irq(struct uart_port *port) +{ + unsigned char int0, int1, int2, int3; + unsigned int iir = serial_port_in(port, UART_IIR); + int ret; + + ret = serial8250_handle_irq(port, iir); + + if ((port->type == PORT_XR17V35X) || + (port->type == PORT_XR17D15X)) { + int0 = serial_port_in(port, 0x80); + int1 = serial_port_in(port, 0x81); + int2 = serial_port_in(port, 0x82); + int3 = serial_port_in(port, 0x83); + } + + return ret; +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + struct uart_port *port; + + up = list_entry(l, struct uart_8250_port, list); + port = &up->port; + + if (port->handle_irq(port)) { + handled = 1; + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk_ratelimited(KERN_ERR + "serial8250: too much work for irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + spin_unlock_irq(&i->lock); + /* List empty so throw away the hash node */ + if (i->head == NULL) { + hlist_del(&i->node); + kfree(i); + } +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct hlist_head *h; + struct hlist_node *n; + struct irq_info *i; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + if (n == NULL) { + i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); + if (i == NULL) { + mutex_unlock(&hash_mutex); + return -ENOMEM; + } + spin_lock_init(&i->lock); + i->irq = up->port.irq; + hlist_add_head(&i->node, h); + } + mutex_unlock(&hash_mutex); + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + irq_flags |= up->port.irqflags; + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + /* + * yes, some broken gcc emit "warning: 'i' may be used uninitialized" + * but no, we are not going to take a patch that assigns NULL below. + */ + struct irq_info *i; + struct hlist_node *n; + struct hlist_head *h; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + BUG_ON(n == NULL); + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); + mutex_unlock(&hash_mutex); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + + up->port.handle_irq(&up->port); + mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); +} + +static void serial8250_backup_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir, ier = 0, lsr; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (up->port.irq) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } + + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (lsr & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_tx_chars(up); + + if (up->port.irq) + serial_out(up, UART_IER, ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, + jiffies + uart_poll_timeout(&up->port) + HZ / 5); +} + +static int univ8250_setup_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + int retval = 0; + + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + pr_debug("ttyS%d - using backup timer\n", serial_index(port)); + + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + uart_poll_timeout(port) + HZ / 5); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!port->irq) { + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); + } else + retval = serial_link_irq_chain(up); + + return retval; +} + +static void univ8250_release_irq(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (port->irq) + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + unsigned int lsr; + + serial8250_rpm_get(up); + + spin_lock_irqsave(&port->lock, flags); + lsr = serial_port_in(port, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&port->lock, flags); + + serial8250_rpm_put(up); + + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int status; + unsigned int ret; + + serial8250_rpm_get(up); + status = serial8250_modem_status(up); + serial8250_rpm_put(up); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial_port_out(port, UART_MCR, mcr); +} +EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (port->set_mctrl) + return port->set_mctrl(port, mctrl); + return serial8250_do_set_mctrl(port, mctrl); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_port_out(port, UART_LCR, up->lcr); + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = serial_in(up, UART_LSR); + + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char lsr; + int status; + + serial8250_rpm_get(up); + + lsr = serial_port_in(port, UART_LSR); + + if (!(lsr & UART_LSR_DR)) { + status = NO_POLL_CHAR; + goto out; + } + + status = serial_port_in(port, UART_RX); +out: + serial8250_rpm_put(up); + return status; +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + /* + * First save the IER then disable the interrupts + */ + ier = serial_port_in(port, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_port_out(port, UART_IER, UART_IER_UUE); + else + serial_port_out(port, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + */ + serial_port_out(port, UART_TX, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_port_out(port, UART_IER, ier); + serial8250_rpm_put(up); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +int serial8250_do_startup(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + unsigned char lsr, iir; + int retval; + + if (port->type == PORT_8250_CIR) + return -ENODEV; + + if (!port->fifosize) + port->fifosize = uart_config[port->type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[port->type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[port->type].flags; + up->mcr = 0; + + if (port->iotype != up->cur_iotype) + set_io_from_upio(port); + + serial8250_rpm_get(up); + if (port->type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + serial_port_out(port, UART_EFR, UART_EFR_ECB); + serial_port_out(port, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(port->flags & UPF_BUGGY_UART) && + (serial_port_in(port, UART_LSR) == 0xff)) { + printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", + serial_index(port)); + retval = -ENODEV; + goto out; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (port->type == PORT_16850) { + unsigned char fctr; + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_port_out(port, UART_TRG, UART_TRG_96); + serial_port_out(port, UART_FCTR, + fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_port_out(port, UART_TRG, UART_TRG_96); + + serial_port_out(port, UART_LCR, 0); + } + + if (port->irq) { + unsigned char iir1; + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&port->lock, flags); + if (up->port.irqflags & IRQF_SHARED) + disable_irq_nosync(port->irq); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + iir1 = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + serial_port_out_sync(port, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + + if (port->irqflags & IRQF_SHARED) + enable_irq(port->irq); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. + */ + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { + up->bugs |= UART_BUG_THRE; + } + } + + retval = up->ops->setup_irq(up); + if (retval) + goto out; + + /* + * Now, initialize the UART + */ + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&port->lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!up->port.irq) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (port->irq) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(port, port->mctrl); + + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + + /* + * Do a quick test to see if we receive an + * interrupt when we enable the TX irq. + */ + serial_port_out(port, UART_IER, UART_IER_THRI); + lsr = serial_port_in(port, UART_LSR); + iir = serial_port_in(port, UART_IIR); + serial_port_out(port, UART_IER, 0); + + if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { + if (!(up->bugs & UART_BUG_TXEN)) { + up->bugs |= UART_BUG_TXEN; + pr_debug("ttyS%d - enabling bad tx status workarounds\n", + serial_index(port)); + } + } else { + up->bugs &= ~UART_BUG_TXEN; + } + +dont_test_tx_en: + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); + serial_port_in(port, UART_IIR); + serial_port_in(port, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* + * Request DMA channels for both RX and TX. + */ + if (up->dma) { + retval = serial8250_request_dma(up); + if (retval) { + pr_warn_ratelimited("ttyS%d - failed to request DMA\n", + serial_index(port)); + up->dma = NULL; + } + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_port_out(port, UART_IER, up->ier); + + if (port->flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (port->iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + inb_p(icp); + } + retval = 0; +out: + serial8250_rpm_put(up); + return retval; +} +EXPORT_SYMBOL_GPL(serial8250_do_startup); + +static int serial8250_startup(struct uart_port *port) +{ + if (port->startup) + return port->startup(port); + return serial8250_do_startup(port); +} + +void serial8250_do_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned long flags; + + serial8250_rpm_get(up); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_port_out(port, UART_IER, 0); + + if (up->dma) + serial8250_release_dma(up); + + spin_lock_irqsave(&port->lock, flags); + if (port->flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((port->iobase & 0xfe0) | 0x1f); + port->mctrl |= TIOCM_OUT1; + } else + port->mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_port_out(port, UART_LCR, + serial_port_in(port, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + serial_port_in(port, UART_RX); + serial8250_rpm_put(up); + + up->ops->release_irq(up); +} +EXPORT_SYMBOL_GPL(serial8250_do_shutdown); + +static void serial8250_shutdown(struct uart_port *port) +{ + if (port->shutdown) + port->shutdown(port); + else + serial8250_do_shutdown(port); +} + +/* + * XR17V35x UARTs have an extra fractional divisor register (DLD) + * Calculate divisor with extra 4-bit fractional portion + */ +static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up, + unsigned int baud, + unsigned int *frac) +{ + struct uart_port *port = &up->port; + unsigned int quot_16; + + quot_16 = DIV_ROUND_CLOSEST(port->uartclk, baud); + *frac = quot_16 & 0x0f; + + return quot_16 >> 4; +} + +static unsigned int serial8250_get_divisor(struct uart_8250_port *up, + unsigned int baud, + unsigned int *frac) +{ + struct uart_port *port = &up->port; + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + * + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else if (up->port.type == PORT_XR17V35X) + quot = xr17v35x_get_divisor(up, baud, frac); + else + quot = uart_get_divisor(port, baud); + + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + + return quot; +} + +static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, + tcflag_t c_cflag) +{ + unsigned char cval; + + switch (c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (c_cflag & PARENB) { + cval |= UART_LCR_PARITY; + if (up->bugs & UART_BUG_PARITY) + up->fifo_bug = true; + } + if (!(c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + return cval; +} + +static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (is_omap1510_8250(up)) { + if (baud == 115200) { + quot = 1; + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); + } + + /* + * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, + * otherwise just set DLAB + */ + if (up->capabilities & UART_NATSEMI) + serial_port_out(port, UART_LCR, 0xe0); + else + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + + serial_dl_write(up, quot); + + /* XR17V35x UARTs have an extra fractional divisor register (DLD) */ + if (up->port.type == PORT_XR17V35X) + serial_port_out(port, 0x2, quot_frac); +} + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char cval; + unsigned long flags; + unsigned int baud, quot, frac = 0; + + cval = serial8250_compute_lcr(up, termios->c_cflag); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(up, baud, &frac); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + + up->lcr = cval; /* Save computed LCR */ + + if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { + /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */ + if ((baud < 2400 && !up->dma) || up->fifo_bug) { + up->fcr &= ~UART_FCR_TRIGGER_MASK; + up->fcr |= UART_FCR_TRIGGER_1; + } + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. In the case where + * the remote UART is not using CTS auto flow control, we must + * have sufficient FIFO entries for the latency of the remote + * UART to respond. IOW, at least 32 bytes of FIFO. + */ + if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (!(up->bugs & UART_BUG_NOMSR) && + UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE; + if (up->capabilities & UART_CAP_RTOIE) + up->ier |= UART_IER_RTOIE; + + serial_port_out(port, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B); + if (port->flags & UPF_EXAR_EFR) + serial_port_out(port, UART_XR_EFR, efr); + else + serial_port_out(port, UART_EFR, efr); + } + + serial8250_set_divisor(port, baud, quot, frac); + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (port->type == PORT_16750) + serial_port_out(port, UART_FCR, up->fcr); + + serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */ + if (port->type != PORT_16750) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + if (up->fcr & UART_FCR_ENABLE_FIFO) + serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_port_out(port, UART_FCR, up->fcr); /* set fcr */ + } + serial8250_set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} + +static void +serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios) +{ + if (termios->c_line == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + spin_lock_irq(&port->lock); + serial8250_enable_ms(port); + spin_unlock_irq(&port->lock); + } else { + port->flags &= ~UPF_HARDPPS_CD; + if (!UART_ENABLE_MS(port, termios->c_cflag)) { + spin_lock_irq(&port->lock); + serial8250_disable_ms(port); + spin_unlock_irq(&port->lock); + } + } +} + + +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = up_to_u8250p(port); + + serial8250_set_sleep(p, state != 0); +} +EXPORT_SYMBOL(serial8250_do_pm); + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + if (port->pm) + port->pm(port, state, oldstate); + else + serial8250_do_pm(port, state, oldstate); +} + +static unsigned int serial8250_port_size(struct uart_8250_port *pt) +{ + if (pt->port.mapsize) + return pt->port.mapsize; + if (pt->port.iotype == UPIO_AU) { + if (pt->port.type == PORT_RT2880) + return 0x100; + return 0x1000; + } + if (is_omap1_8250(pt)) + return 0x16 << pt->port.regshift; + + return 8 << pt->port.regshift; +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; + int ret = 0; + + switch (port->iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_MEM: + if (!port->mapbase) + break; + + if (!request_mem_region(port->mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap_nocache(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(port->iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + struct uart_port *port = &up->port; + + switch (port->iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM32BE: + case UPIO_MEM: + if (!port->mapbase) + break; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(port->iobase, size); + break; + } +} + +#ifdef CONFIG_SERIAL_8250_RSA +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + int ret = -EINVAL; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += port->iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + struct uart_port *port = &up->port; + + switch (port->iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(port->iobase + offset, size); + break; + } +} +#endif + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_release_std_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + if (port->type == PORT_8250_CIR) + return -ENODEV; + + ret = serial8250_request_std_resource(up); + + return ret; +} + +static int fcr_get_rxtrig_bytes(struct uart_8250_port *up) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + unsigned char bytes; + + bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)]; + + return bytes ? bytes : -EOPNOTSUPP; +} + +static int bytes_to_fcr_rxtrig(struct uart_8250_port *up, unsigned char bytes) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + int i; + + if (!conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(UART_FCR_R_TRIG_00)]) + return -EOPNOTSUPP; + + for (i = 1; i < UART_FCR_R_TRIG_MAX_STATE; i++) { + if (bytes < conf_type->rxtrig_bytes[i]) + /* Use the nearest lower value */ + return (--i) << UART_FCR_R_TRIG_SHIFT; + } + + return UART_FCR_R_TRIG_11; +} + +static int do_get_rxtrig(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + struct uart_8250_port *up = + container_of(uport, struct uart_8250_port, port); + + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1) + return -EINVAL; + + return fcr_get_rxtrig_bytes(up); +} + +static int do_serial8250_get_rxtrig(struct tty_port *port) +{ + int rxtrig_bytes; + + mutex_lock(&port->mutex); + rxtrig_bytes = do_get_rxtrig(port); + mutex_unlock(&port->mutex); + + return rxtrig_bytes; +} + +static ssize_t serial8250_get_attr_rx_trig_bytes(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tty_port *port = dev_get_drvdata(dev); + int rxtrig_bytes; + + rxtrig_bytes = do_serial8250_get_rxtrig(port); + if (rxtrig_bytes < 0) + return rxtrig_bytes; + + return snprintf(buf, PAGE_SIZE, "%d\n", rxtrig_bytes); +} + +static int do_set_rxtrig(struct tty_port *port, unsigned char bytes) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + struct uart_8250_port *up = + container_of(uport, struct uart_8250_port, port); + int rxtrig; + + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 || + up->fifo_bug) + return -EINVAL; + + rxtrig = bytes_to_fcr_rxtrig(up, bytes); + if (rxtrig < 0) + return rxtrig; + + serial8250_clear_fifos(up); + up->fcr &= ~UART_FCR_TRIGGER_MASK; + up->fcr |= (unsigned char)rxtrig; + serial_out(up, UART_FCR, up->fcr); + return 0; +} + +static int do_serial8250_set_rxtrig(struct tty_port *port, unsigned char bytes) +{ + int ret; + + mutex_lock(&port->mutex); + ret = do_set_rxtrig(port, bytes); + mutex_unlock(&port->mutex); + + return ret; +} + +static ssize_t serial8250_set_attr_rx_trig_bytes(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tty_port *port = dev_get_drvdata(dev); + unsigned char bytes; + int ret; + + if (!count) + return -EINVAL; + + ret = kstrtou8(buf, 10, &bytes); + if (ret < 0) + return ret; + + ret = do_serial8250_set_rxtrig(port, bytes); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(rx_trig_bytes, S_IRUSR | S_IWUSR | S_IRGRP, + serial8250_get_attr_rx_trig_bytes, + serial8250_set_attr_rx_trig_bytes); + +static struct attribute *serial8250_dev_attrs[] = { + &dev_attr_rx_trig_bytes.attr, + NULL, + }; + +static struct attribute_group serial8250_dev_attr_group = { + .attrs = serial8250_dev_attrs, + }; + +static void register_dev_spec_attr_grp(struct uart_8250_port *up) +{ + const struct serial8250_config *conf_type = &uart_config[up->port.type]; + + if (conf_type->rxtrig_bytes[0]) + up->port.attr_group = &serial8250_dev_attr_group; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + if (port->type == PORT_8250_CIR) + return; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + if (port->iotype != up->cur_iotype) + set_io_from_upio(port); + + if (flags & UART_CONFIG_TYPE) + autoconfig(up); + + /* if access method is AU, it is a 16550 with a quirk */ + if (port->type == PORT_16550A && port->iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; + + /* HW bugs may trigger IRQ while IIR == NO_INT */ + if (port->type == PORT_TEGRA) + up->bugs |= UART_BUG_NOMSR; + + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (port->type == PORT_UNKNOWN) + serial8250_release_std_resource(up); + + /* Fixme: probably not the best place for this */ + if ((port->type == PORT_XR17V35X) || + (port->type == PORT_XR17D15X)) + port->handle_irq = exar_handle_irq; + + register_dev_spec_attr_grp(up); + up->fcr = uart_config[up->port.type].fcr; +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static const struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif +}; + +static const struct uart_ops *base_ops; +static struct uart_ops univ8250_port_ops; + +static const struct uart_8250_ops univ8250_driver_ops = { + .setup_irq = univ8250_setup_irq, + .release_irq = univ8250_release_irq, +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +/** + * serial8250_get_port - retrieve struct uart_8250_port + * @line: serial line number + * + * This function retrieves struct uart_8250_port for the specific line. + * This struct *must* *not* be used to perform a 8250 or serial core operation + * which is not accessible otherwise. Its only purpose is to make the struct + * accessible to the runtime-pm callbacks for context suspend/restore. + * The lock assumption made here is none because runtime-pm suspend/resume + * callbacks should not be invoked if there is any operation performed on the + * port. + */ +struct uart_8250_port *serial8250_get_port(int line) +{ + return &serial8250_ports[line]; +} +EXPORT_SYMBOL_GPL(serial8250_get_port); + +static void (*serial8250_isa_config)(int port, struct uart_port *up, + unsigned short *capabilities); + +void serial8250_set_isa_configurator( + void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +static void serial8250_init_port(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + spin_lock_init(&port->lock); + port->ops = &serial8250_pops; + + up->cur_iotype = 0xFF; +} + +static void serial8250_set_defaults(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + + if (up->port.flags & UPF_FIXED_TYPE) { + unsigned int type = up->port.type; + + if (!up->port.fifosize) + up->port.fifosize = uart_config[type].fifo_size; + if (!up->tx_loadsz) + up->tx_loadsz = uart_config[type].tx_loadsz; + if (!up->capabilities) + up->capabilities = uart_config[type].flags; + } + + set_io_from_upio(port); + + /* default dma handlers */ + if (up->dma) { + if (!up->dma->tx_dma) + up->dma->tx_dma = serial8250_tx_dma; + if (!up->dma->rx_dma) + up->dma->rx_dma = serial8250_rx_dma; + } +} + +#ifdef CONFIG_SERIAL_8250_RSA + +static void univ8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + up->probe &= ~UART_PROBE_RSA; + if (port->type == PORT_RSA) { + if (serial8250_request_rsa_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + } else if (flags & UART_CONFIG_TYPE) { + int i; + + for (i = 0; i < probe_rsa_count; i++) { + if (probe_rsa[i] == up->port.iobase) { + if (serial8250_request_rsa_resource(up) == 0) + up->probe |= UART_PROBE_RSA; + break; + } + } + } + + base_ops->config_port(port, flags); + + if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) + serial8250_release_rsa_resource(up); +} + +static int univ8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + int ret; + + ret = base_ops->request_port(port); + if (ret == 0 && port->type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + base_ops->release_port(port); + } + + return ret; +} + +static void univ8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + if (port->type == PORT_RSA) + serial8250_release_rsa_resource(up); + base_ops->release_port(port); +} + +static void univ8250_rsa_support(struct uart_ops *ops) +{ + ops->config_port = univ8250_config_port; + ops->request_port = univ8250_request_port; + ops->release_port = univ8250_release_port; +} + +#else +#define univ8250_rsa_support(x) do { } while (0) +#endif /* CONFIG_SERIAL_8250_RSA */ + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + struct uart_port *port = &up->port; + + port->line = i; + serial8250_init_port(up); + if (!base_ops) + base_ops = port->ops; + port->ops = &univ8250_port_ops; + + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + up->ops = &univ8250_driver_ops; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + } + + /* chain base port ops to support Remote Supervisor Adapter */ + univ8250_port_ops = *base_ops; + univ8250_rsa_support(&univ8250_port_ops); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; + i++, up++) { + struct uart_port *port = &up->port; + + port->iobase = old_serial_port[i].port; + port->irq = irq_canonicalize(old_serial_port[i].irq); + port->irqflags = old_serial_port[i].irqflags; + port->uartclk = old_serial_port[i].baud_base * 16; + port->flags = old_serial_port[i].flags; + port->hub6 = old_serial_port[i].hub6; + port->membase = old_serial_port[i].iomem_base; + port->iotype = old_serial_port[i].io_type; + port->regshift = old_serial_port[i].iomem_reg_shift; + serial8250_set_defaults(up); + + port->irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + } +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev) + continue; + + up->port.dev = dev; + + if (skip_txen_test) + up->port.flags |= UPF_NO_TXEN_TEST; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_port_out(port, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void serial8250_console_write(struct uart_8250_port *up, const char *s, + unsigned int count) +{ + struct uart_port *port = &up->port; + unsigned long flags; + unsigned int ier; + int locked = 1; + + touch_nmi_watchdog(); + + serial8250_rpm_get(up); + + if (port->sysrq) + locked = 0; + else if (oops_in_progress || in_kdb_printk()) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_port_in(port, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_port_out(port, UART_IER, UART_IER_UUE); + else + serial_port_out(port, UART_IER, 0); + + /* check scratch reg to see if port powered off during system sleep */ + if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { + struct ktermios termios; + unsigned int baud, quot, frac = 0; + + termios.c_cflag = port->cons->cflag; + if (port->state->port.tty && termios.c_cflag == 0) + termios.c_cflag = port->state->port.tty->termios.c_cflag; + + baud = uart_get_baud_rate(port, &termios, NULL, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(up, baud, &frac); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + + up->canary = 0; + } + + uart_console_write(port, s, count, serial8250_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_port_out(port, UART_IER, ier); + + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + serial8250_modem_status(up); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); +} + +static void univ8250_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + + serial8250_console_write(up, s, count); +} + +static unsigned int probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_port_in(port, UART_LCR); + serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_port_in(port, UART_DLL); + dlm = serial_port_in(port, UART_DLM); + serial_port_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +static int serial8250_console_setup(struct uart_port *port, char *options, bool probe) +{ + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else if (probe) + baud = probe_baud(port); + + return uart_set_options(port, port->cons, baud, parity, bits, flow); +} + +static int univ8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= nr_uarts) + co->index = 0; + port = &serial8250_ports[co->index].port; + /* link port to console */ + port->cons = co; + + return serial8250_console_setup(port, options, false); +} + +/** + * univ8250_console_match - non-standard console matching + * @co: registering console + * @name: name from console command line + * @idx: index from console command line + * @options: ptr to option string from console command line + * + * Only attempts to match console command lines of the form: + * console=uart[8250],io|mmio|mmio32,[,] + * console=uart[8250],0x[,] + * This form is used to register an initial earlycon boot console and + * replace it with the serial8250_console at 8250 driver init. + * + * Performs console setup for a match (as required by interface) + * If no are specified, then assume the h/w is already setup. + * + * Returns 0 if console matches; otherwise non-zero to use default matching + */ +static int univ8250_console_match(struct console *co, char *name, int idx, + char *options) +{ + char match[] = "uart"; /* 8250-specific earlycon name */ + unsigned char iotype; + unsigned long addr; + int i; + + if (strncmp(name, match, 4) != 0) + return -ENODEV; + + if (uart_parse_earlycon(options, &iotype, &addr, &options)) + return -ENODEV; + + /* try to match the port specified on the command line */ + for (i = 0; i < nr_uarts; i++) { + struct uart_port *port = &serial8250_ports[i].port; + + if (port->iotype != iotype) + continue; + if ((iotype == UPIO_MEM || iotype == UPIO_MEM32) && + (port->mapbase != addr)) + continue; + if (iotype == UPIO_PORT && port->iobase != addr) + continue; + + co->index = i; + port->cons = co; + return serial8250_console_setup(port, options, true); + } + + return -ENODEV; +} + +static struct console univ8250_console = { + .name = "ttyS", + .write = univ8250_console_write, + .device = uart_console_device, + .setup = univ8250_console_setup, + .match = univ8250_console_match, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init univ8250_console_init(void) +{ + serial8250_isa_init_ports(); + register_console(&univ8250_console); + return 0; +} +console_initcall(univ8250_console_init); + +#define SERIAL8250_CONSOLE &univ8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .cons = SERIAL8250_CONSOLE, +}; + +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ +int __init early_serial_setup(struct uart_port *port) +{ + struct uart_port *p; + + if (port->line >= ARRAY_SIZE(serial8250_ports)) + return -ENODEV; + + serial8250_isa_init_ports(); + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->irqflags = port->irqflags; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->mapsize = port->mapsize; + p->private_data = port->private_data; + p->type = port->type; + p->line = port->line; + + serial8250_set_defaults(up_to_u8250p(p)); + + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + if (port->handle_irq) + p->handle_irq = port->handle_irq; + + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + if (!console_suspend_enabled && uart_console(port) && + port->type != PORT_8250) { + unsigned char canary = 0xa5; + serial_out(up, UART_SCR, canary); + if (serial_in(up, UART_SCR) == canary) + up->canary = canary; + } + + uart_suspend_port(&serial8250_reg, port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + up->canary = 0; + + if (up->capabilities & UART_NATSEMI) { + /* Ensure it's still in high speed mode */ + serial_port_out(port, UART_LCR, 0xE0); + + ns16550a_goto_highspeed(up); + + serial_port_out(port, UART_LCR, 0); + port->uartclk = 921600*16; + } + uart_resume_port(&serial8250_reg, port); +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); + struct uart_8250_port uart; + int ret, i, irqflag = 0; + + memset(&uart, 0, sizeof(uart)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + uart.port.iobase = p->iobase; + uart.port.membase = p->membase; + uart.port.irq = p->irq; + uart.port.irqflags = p->irqflags; + uart.port.uartclk = p->uartclk; + uart.port.regshift = p->regshift; + uart.port.iotype = p->iotype; + uart.port.flags = p->flags; + uart.port.mapbase = p->mapbase; + uart.port.hub6 = p->hub6; + uart.port.private_data = p->private_data; + uart.port.type = p->type; + uart.port.serial_in = p->serial_in; + uart.port.serial_out = p->serial_out; + uart.port.handle_irq = p->handle_irq; + uart.port.handle_break = p->handle_break; + uart.port.set_termios = p->set_termios; + uart.port.pm = p->pm; + uart.port.dev = &dev->dev; + uart.port.irqflags |= irqflag; + ret = serial8250_register_8250_port(&uart); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove = serial8250_remove, + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_8250_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DEFINE_MUTEX(serial_mutex); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < nr_uarts; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* try line number first if still available */ + i = port->line; + if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +/** + * serial8250_register_8250_port - register a serial port + * @up: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_8250_port(struct uart_8250_port *up) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (up->port.uartclk == 0) + return -EINVAL; + + mutex_lock(&serial_mutex); + + uart = serial8250_find_match_or_unused(&up->port); + if (uart && uart->port.type != PORT_8250_CIR) { + if (uart->port.dev) + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = up->port.iobase; + uart->port.membase = up->port.membase; + uart->port.irq = up->port.irq; + uart->port.irqflags = up->port.irqflags; + uart->port.uartclk = up->port.uartclk; + uart->port.fifosize = up->port.fifosize; + uart->port.regshift = up->port.regshift; + uart->port.iotype = up->port.iotype; + uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF; + uart->bugs = up->bugs; + uart->port.mapbase = up->port.mapbase; + uart->port.mapsize = up->port.mapsize; + uart->port.private_data = up->port.private_data; + uart->port.fifosize = up->port.fifosize; + uart->tx_loadsz = up->tx_loadsz; + uart->capabilities = up->capabilities; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; + uart->port.rs485_config = up->port.rs485_config; + uart->port.rs485 = up->port.rs485; + uart->dma = up->dma; + + /* Take tx_loadsz from fifosize if it wasn't set separately */ + if (uart->port.fifosize && !uart->tx_loadsz) + uart->tx_loadsz = uart->port.fifosize; + + if (up->port.dev) + uart->port.dev = up->port.dev; + + if (skip_txen_test) + uart->port.flags |= UPF_NO_TXEN_TEST; + + if (up->port.flags & UPF_FIXED_TYPE) + uart->port.type = up->port.type; + + serial8250_set_defaults(uart); + + /* Possibly override default I/O functions. */ + if (up->port.serial_in) + uart->port.serial_in = up->port.serial_in; + if (up->port.serial_out) + uart->port.serial_out = up->port.serial_out; + if (up->port.handle_irq) + uart->port.handle_irq = up->port.handle_irq; + /* Possibly override set_termios call */ + if (up->port.set_termios) + uart->port.set_termios = up->port.set_termios; + if (up->port.set_mctrl) + uart->port.set_mctrl = up->port.set_mctrl; + if (up->port.startup) + uart->port.startup = up->port.startup; + if (up->port.shutdown) + uart->port.shutdown = up->port.shutdown; + if (up->port.pm) + uart->port.pm = up->port.pm; + if (up->port.handle_break) + uart->port.handle_break = up->port.handle_break; + if (up->dl_read) + uart->dl_read = up->dl_read; + if (up->dl_write) + uart->dl_write = up->dl_write; + + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_mutex); + + return ret; +} +EXPORT_SYMBOL(serial8250_register_8250_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + mutex_lock(&serial_mutex); + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + if (skip_txen_test) + uart->port.flags |= UPF_NO_TXEN_TEST; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = 0; + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + mutex_unlock(&serial_mutex); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret; + + serial8250_isa_init_ports(); + + printk(KERN_INFO "Serial: 8250/16550 driver, " + "%d ports, IRQ sharing %sabled\n", nr_uarts, + share_irqs ? "en" : "dis"); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + ret = serial8250_pnp_init(); + if (ret) + goto unreg_uart_drv; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_pnp; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_pnp: + serial8250_pnp_exit(); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + + serial8250_pnp_exit(); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); + +module_param(share_irqs, uint, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" + " (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); + +#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS +#ifndef MODULE +/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name + * working as well for the module options so we don't break people. We + * need to keep the names identical and the convenient macros will happily + * refuse to let us do that by failing the build with redefinition errors + * of global variables. So we stick them inside a dummy function to avoid + * those conflicts. The options still get parsed, and the redefined + * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. + * + * This is hacky. I'm sorry. + */ +static void __used s8250_options(void) +{ +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "8250_core." + + module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); + module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); + module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); +#ifdef CONFIG_SERIAL_8250_RSA + __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, + ¶m_array_ops, .arr = &__param_arr_probe_rsa, + 0444, -1, 0); +#endif +} +#else +MODULE_ALIAS("8250_core"); +#endif +#endif diff --git a/kernel/drivers/tty/serial/8250/8250_dma.c b/kernel/drivers/tty/serial/8250/8250_dma.c new file mode 100644 index 000000000..21d01a491 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_dma.c @@ -0,0 +1,259 @@ +/* + * 8250_dma.c - DMA Engine API support for 8250.c + * + * Copyright (C) 2013 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include + +#include "8250.h" + +static void __dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + unsigned long flags; + int ret; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + + xmit->tail += dma->tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += dma->tx_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + ret = serial8250_tx_dma(p); + if (ret) { + p->ier |= UART_IER_THRI; + serial_port_out(&p->port, UART_IER, p->ier); + } + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static void __dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + int count; + + dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma->rx_running = 0; + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + + tty_flip_buffer_push(tty_port); +} + +int serial8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + int ret; + + if (uart_tx_stopped(&p->port) || dma->tx_running || + uart_circ_empty(xmit)) + return 0; + + dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (dma->tx_size < p->port.fifosize) { + ret = -EINVAL; + goto err; + } + + desc = dmaengine_prep_slave_single(dma->txchan, + dma->tx_addr + xmit->tail, + dma->tx_size, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + ret = -EBUSY; + goto err; + } + + dma->tx_running = 1; + desc->callback = __dma_tx_complete; + desc->callback_param = p; + + dma->tx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + dma_async_issue_pending(dma->txchan); + if (dma->tx_err) { + dma->tx_err = 0; + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } + } + return 0; +err: + dma->tx_err = 1; + return ret; +} + +int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) +{ + struct uart_8250_dma *dma = p->dma; + struct dma_async_tx_descriptor *desc; + + switch (iir & 0x3f) { + case UART_IIR_RLSI: + /* 8250_core handles errors and break interrupts */ + return -EIO; + case UART_IIR_RX_TIMEOUT: + /* + * If RCVR FIFO trigger level was not reached, complete the + * transfer and let 8250_core copy the remaining data. + */ + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_complete(p); + dmaengine_terminate_all(dma->rxchan); + } + return -ETIMEDOUT; + default: + break; + } + + if (dma->rx_running) + return 0; + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EBUSY; + + dma->rx_running = 1; + desc->callback = __dma_rx_complete; + desc->callback_param = p; + + dma->rx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma_async_issue_pending(dma->rxchan); + + return 0; +} + +int serial8250_request_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + dma_cap_mask_t mask; + + /* Default slave configuration parameters */ + dma->rxconf.direction = DMA_DEV_TO_MEM; + dma->rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->rxconf.src_addr = p->port.mapbase + UART_RX; + + dma->txconf.direction = DMA_MEM_TO_DEV; + dma->txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->txconf.dst_addr = p->port.mapbase + UART_TX; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get a channel for RX */ + dma->rxchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->rx_param, + p->port.dev, "rx"); + if (!dma->rxchan) + return -ENODEV; + + dmaengine_slave_config(dma->rxchan, &dma->rxconf); + + /* Get a channel for TX */ + dma->txchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->tx_param, + p->port.dev, "tx"); + if (!dma->txchan) { + dma_release_channel(dma->rxchan); + return -ENODEV; + } + + dmaengine_slave_config(dma->txchan, &dma->txconf); + + /* RX buffer */ + if (!dma->rx_size) + dma->rx_size = PAGE_SIZE; + + dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size, + &dma->rx_addr, GFP_KERNEL); + if (!dma->rx_buf) + goto err; + + /* TX buffer */ + dma->tx_addr = dma_map_single(dma->txchan->device->dev, + p->port.state->xmit.buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) { + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, + dma->rx_buf, dma->rx_addr); + goto err; + } + + dev_dbg_ratelimited(p->port.dev, "got both dma channels\n"); + + return 0; +err: + dma_release_channel(dma->rxchan); + dma_release_channel(dma->txchan); + + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(serial8250_request_dma); + +void serial8250_release_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (!dma) + return; + + /* Release RX resources */ + dmaengine_terminate_all(dma->rxchan); + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, dma->rx_buf, + dma->rx_addr); + dma_release_channel(dma->rxchan); + dma->rxchan = NULL; + + /* Release TX resources */ + dmaengine_terminate_all(dma->txchan); + dma_unmap_single(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_release_channel(dma->txchan); + dma->txchan = NULL; + dma->tx_running = 0; + + dev_dbg_ratelimited(p->port.dev, "dma channels released\n"); +} +EXPORT_SYMBOL_GPL(serial8250_release_dma); diff --git a/kernel/drivers/tty/serial/8250/8250_dw.c b/kernel/drivers/tty/serial/8250/8250_dw.c new file mode 100644 index 000000000..176f18f2e --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_dw.c @@ -0,0 +1,649 @@ +/* + * Synopsys DesignWare 8250 driver. + * + * Copyright 2011 Picochip, Jamie Iles. + * Copyright 2013 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the + * LCR is written whilst busy. If it is, then a busy detect interrupt is + * raised, the LCR needs to be rewritten and the uart status register read. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_USR 0x1f /* UART Status Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) +#define DW_UART_CPR_AFCE_MODE (1 << 4) +#define DW_UART_CPR_THRE_MODE (1 << 5) +#define DW_UART_CPR_SIR_MODE (1 << 6) +#define DW_UART_CPR_SIR_LP_MODE (1 << 7) +#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8) +#define DW_UART_CPR_FIFO_ACCESS (1 << 9) +#define DW_UART_CPR_FIFO_STAT (1 << 10) +#define DW_UART_CPR_SHADOW (1 << 11) +#define DW_UART_CPR_ENCODED_PARMS (1 << 12) +#define DW_UART_CPR_DMA_EXTRA (1 << 13) +#define DW_UART_CPR_FIFO_MODE (0xff << 16) +/* Helper for fifo size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) + + +struct dw8250_data { + u8 usr_reg; + int last_mcr; + int line; + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct reset_control *rst; + struct uart_8250_dma dma; +}; + +#define BYT_PRV_CLK 0x800 +#define BYT_PRV_CLK_EN (1 << 0) +#define BYT_PRV_CLK_M_VAL_SHIFT 1 +#define BYT_PRV_CLK_N_VAL_SHIFT 16 +#define BYT_PRV_CLK_UPDATE (1 << 31) + +static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + /* If reading MSR, report CTS asserted when auto-CTS/RTS enabled */ + if (offset == UART_MSR && d->last_mcr & UART_MCR_AFE) { + value |= UART_MSR_CTS; + value &= ~UART_MSR_DCTS; + } + + /* Override any modem control signals if needed */ + if (offset == UART_MSR) { + value |= d->msr_mask_on; + value &= ~d->msr_mask_off; + } + + return value; +} + +static void dw8250_force_idle(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + + serial8250_clear_and_reinit_fifos(up); + (void)p->serial_in(p, UART_RX); +} + +static void dw8250_serial_out(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + if (offset == UART_MCR) + d->last_mcr = value; + + writeb(value, p->membase + (offset << p->regshift)); + + /* Make sure LCR write wasn't ignored */ + if (offset == UART_LCR) { + int tries = 1000; + while (tries--) { + unsigned int lcr = p->serial_in(p, UART_LCR); + if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR)) + return; + dw8250_force_idle(p); + writeb(value, p->membase + (UART_LCR << p->regshift)); + } + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ + } +} + +static unsigned int dw8250_serial_in(struct uart_port *p, int offset) +{ + unsigned int value = readb(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +#ifdef CONFIG_64BIT +static unsigned int dw8250_serial_inq(struct uart_port *p, int offset) +{ + unsigned int value; + + value = (u8)__raw_readq(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static void dw8250_serial_outq(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + if (offset == UART_MCR) + d->last_mcr = value; + + value &= 0xff; + __raw_writeq(value, p->membase + (offset << p->regshift)); + /* Read back to ensure register write ordering. */ + __raw_readq(p->membase + (UART_LCR << p->regshift)); + + /* Make sure LCR write wasn't ignored */ + if (offset == UART_LCR) { + int tries = 1000; + while (tries--) { + unsigned int lcr = p->serial_in(p, UART_LCR); + if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR)) + return; + dw8250_force_idle(p); + __raw_writeq(value & 0xff, + p->membase + (UART_LCR << p->regshift)); + } + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ + } +} +#endif /* CONFIG_64BIT */ + +static void dw8250_serial_out32(struct uart_port *p, int offset, int value) +{ + struct dw8250_data *d = p->private_data; + + if (offset == UART_MCR) + d->last_mcr = value; + + writel(value, p->membase + (offset << p->regshift)); + + /* Make sure LCR write wasn't ignored */ + if (offset == UART_LCR) { + int tries = 1000; + while (tries--) { + unsigned int lcr = p->serial_in(p, UART_LCR); + if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR)) + return; + dw8250_force_idle(p); + writel(value, p->membase + (UART_LCR << p->regshift)); + } + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ + } +} + +static unsigned int dw8250_serial_in32(struct uart_port *p, int offset) +{ + unsigned int value = readl(p->membase + (offset << p->regshift)); + + return dw8250_modify_msr(p, offset, value); +} + +static int dw8250_handle_irq(struct uart_port *p) +{ + struct dw8250_data *d = p->private_data; + unsigned int iir = p->serial_in(p, UART_IIR); + + if (serial8250_handle_irq(p, iir)) { + return 1; + } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* Clear the USR */ + (void)p->serial_in(p, d->usr_reg); + + return 1; + } + + return 0; +} + +static void +dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + pm_runtime_put_sync_suspend(port->dev); +} + +static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + struct dw8250_data *d = p->private_data; + unsigned int rate; + int ret; + + if (IS_ERR(d->clk) || !old) + goto out; + + /* Not requesting clock rates below 1.8432Mhz */ + if (baud < 115200) + baud = 115200; + + clk_disable_unprepare(d->clk); + rate = clk_round_rate(d->clk, baud * 16); + ret = clk_set_rate(d->clk, rate); + clk_prepare_enable(d->clk); + + if (!ret) + p->uartclk = rate; +out: + serial8250_do_set_termios(p, termios, old); +} + +static bool dw8250_dma_filter(struct dma_chan *chan, void *param) +{ + return false; +} + +static void dw8250_setup_port(struct uart_8250_port *up) +{ + struct uart_port *p = &up->port; + u32 reg = readl(p->membase + DW_UART_UCV); + + /* + * If the Component Version Register returns zero, we know that + * ADDITIONAL_FEATURES are not enabled. No need to go any further. + */ + if (!reg) + return; + + dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + + reg = readl(p->membase + DW_UART_CPR); + if (!reg) + return; + + /* Select the type based on fifo */ + if (reg & DW_UART_CPR_FIFO_MODE) { + p->type = PORT_16550A; + p->flags |= UPF_FIXED_TYPE; + p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); + up->tx_loadsz = p->fifosize; + up->capabilities = UART_CAP_FIFO; + } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; +} + +static int dw8250_probe_of(struct uart_port *p, + struct dw8250_data *data) +{ + struct device_node *np = p->dev->of_node; + struct uart_8250_port *up = up_to_u8250p(p); + u32 val; + bool has_ucv = true; + int id; + +#ifdef CONFIG_64BIT + if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) { + p->serial_in = dw8250_serial_inq; + p->serial_out = dw8250_serial_outq; + p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + p->type = PORT_OCTEON; + data->usr_reg = 0x27; + has_ucv = false; + } else +#endif + if (!of_property_read_u32(np, "reg-io-width", &val)) { + switch (val) { + case 1: + break; + case 4: + p->iotype = UPIO_MEM32; + p->serial_in = dw8250_serial_in32; + p->serial_out = dw8250_serial_out32; + break; + default: + dev_err(p->dev, "unsupported reg-io-width (%u)\n", val); + return -EINVAL; + } + } + if (has_ucv) + dw8250_setup_port(up); + + /* if we have a valid fifosize, try hooking up DMA here */ + if (p->fifosize) { + up->dma = &data->dma; + + up->dma->rxconf.src_maxburst = p->fifosize / 4; + up->dma->txconf.dst_maxburst = p->fifosize / 4; + } + + if (!of_property_read_u32(np, "reg-shift", &val)) + p->regshift = val; + + /* get index of serial line, if found in DT aliases */ + id = of_alias_get_id(np, "serial"); + if (id >= 0) + p->line = id; + + if (of_property_read_bool(np, "dcd-override")) { + /* Always report DCD as active */ + data->msr_mask_on |= UART_MSR_DCD; + data->msr_mask_off |= UART_MSR_DDCD; + } + + if (of_property_read_bool(np, "dsr-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (of_property_read_bool(np, "cts-override")) { + /* Always report CTS as active */ + data->msr_mask_on |= UART_MSR_CTS; + data->msr_mask_off |= UART_MSR_DCTS; + } + + if (of_property_read_bool(np, "ri-override")) { + /* Always report Ring indicator as inactive */ + data->msr_mask_off |= UART_MSR_RI; + data->msr_mask_off |= UART_MSR_TERI; + } + + return 0; +} + +static int dw8250_probe_acpi(struct uart_8250_port *up, + struct dw8250_data *data) +{ + struct uart_port *p = &up->port; + + dw8250_setup_port(up); + + p->iotype = UPIO_MEM32; + p->serial_in = dw8250_serial_in32; + p->serial_out = dw8250_serial_out32; + p->regshift = 2; + + up->dma = &data->dma; + + up->dma->rxconf.src_maxburst = p->fifosize / 4; + up->dma->txconf.dst_maxburst = p->fifosize / 4; + + up->port.set_termios = dw8250_set_termios; + + return 0; +} + +static int dw8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int irq = platform_get_irq(pdev, 0); + struct dw8250_data *data; + int err; + + if (!regs) { + dev_err(&pdev->dev, "no registers defined\n"); + return -EINVAL; + } + + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(&pdev->dev, "cannot get irq\n"); + return irq; + } + + spin_lock_init(&uart.port.lock); + uart.port.mapbase = regs->start; + uart.port.irq = irq; + uart.port.handle_irq = dw8250_handle_irq; + uart.port.pm = dw8250_do_pm; + uart.port.type = PORT_8250; + uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart.port.dev = &pdev->dev; + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->usr_reg = DW_UART_USR; + + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(&pdev->dev, "clock-frequency", + &uart.port.uartclk); + + /* If there is separate baudclk, get the rate from it. */ + data->clk = devm_clk_get(&pdev->dev, "baudclk"); + if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER) + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!IS_ERR_OR_NULL(data->clk)) { + err = clk_prepare_enable(data->clk); + if (err) + dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n", + err); + else + uart.port.uartclk = clk_get_rate(data->clk); + } + + /* If no clock rate is defined, fail. */ + if (!uart.port.uartclk) { + dev_err(&pdev->dev, "clock rate not defined\n"); + return -EINVAL; + } + + data->pclk = devm_clk_get(&pdev->dev, "apb_pclk"); + if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) { + err = -EPROBE_DEFER; + goto err_clk; + } + if (!IS_ERR(data->pclk)) { + err = clk_prepare_enable(data->pclk); + if (err) { + dev_err(&pdev->dev, "could not enable apb_pclk\n"); + goto err_clk; + } + } + + data->rst = devm_reset_control_get_optional(&pdev->dev, NULL); + if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) { + err = -EPROBE_DEFER; + goto err_pclk; + } + if (!IS_ERR(data->rst)) + reset_control_deassert(data->rst); + + data->dma.rx_param = data; + data->dma.tx_param = data; + data->dma.fn = dw8250_dma_filter; + + uart.port.iotype = UPIO_MEM; + uart.port.serial_in = dw8250_serial_in; + uart.port.serial_out = dw8250_serial_out; + uart.port.private_data = data; + + if (pdev->dev.of_node) { + err = dw8250_probe_of(&uart.port, data); + if (err) + goto err_reset; + } else if (ACPI_HANDLE(&pdev->dev)) { + err = dw8250_probe_acpi(&uart, data); + if (err) + goto err_reset; + } else { + err = -ENODEV; + goto err_reset; + } + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) { + err = data->line; + goto err_reset; + } + + platform_set_drvdata(pdev, data); + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; + +err_reset: + if (!IS_ERR(data->rst)) + reset_control_assert(data->rst); + +err_pclk: + if (!IS_ERR(data->pclk)) + clk_disable_unprepare(data->pclk); + +err_clk: + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); + + return err; +} + +static int dw8250_remove(struct platform_device *pdev) +{ + struct dw8250_data *data = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + + serial8250_unregister_port(data->line); + + if (!IS_ERR(data->rst)) + reset_control_assert(data->rst); + + if (!IS_ERR(data->pclk)) + clk_disable_unprepare(data->pclk); + + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dw8250_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->line); + + return 0; +} + +static int dw8250_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->line); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int dw8250_runtime_suspend(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); + + if (!IS_ERR(data->pclk)) + clk_disable_unprepare(data->pclk); + + return 0; +} + +static int dw8250_runtime_resume(struct device *dev) +{ + struct dw8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->pclk)) + clk_prepare_enable(data->pclk); + + if (!IS_ERR(data->clk)) + clk_prepare_enable(data->clk); + + return 0; +} +#endif + +static const struct dev_pm_ops dw8250_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume) + SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL) +}; + +static const struct of_device_id dw8250_of_match[] = { + { .compatible = "snps,dw-apb-uart" }, + { .compatible = "cavium,octeon-3860-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw8250_of_match); + +static const struct acpi_device_id dw8250_acpi_match[] = { + { "INT33C4", 0 }, + { "INT33C5", 0 }, + { "INT3434", 0 }, + { "INT3435", 0 }, + { "80860F0A", 0 }, + { "8086228A", 0 }, + { "APMC0D08", 0}, + { "AMD0020", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); + +static struct platform_driver dw8250_platform_driver = { + .driver = { + .name = "dw-apb-uart", + .pm = &dw8250_pm_ops, + .of_match_table = dw8250_of_match, + .acpi_match_table = ACPI_PTR(dw8250_acpi_match), + }, + .probe = dw8250_probe, + .remove = dw8250_remove, +}; + +module_platform_driver(dw8250_platform_driver); + +MODULE_AUTHOR("Jamie Iles"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver"); +MODULE_ALIAS("platform:dw-apb-uart"); diff --git a/kernel/drivers/tty/serial/8250/8250_early.c b/kernel/drivers/tty/serial/8250/8250_early.c new file mode 100644 index 000000000..6c0fd8b9d --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_early.c @@ -0,0 +1,154 @@ +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset) +{ + switch (port->iotype) { + case UPIO_MEM: + return readb(port->membase + offset); + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_MEM32BE: + return ioread32be(port->membase + (offset << 2)); + case UPIO_PORT: + return inb(port->iobase + offset); + default: + return 0; + } +} + +void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb(value, port->membase + offset); + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_MEM32BE: + iowrite32be(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: + outb(value, port->iobase + offset); + break; + } +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __init wait_for_xmitr(struct uart_port *port) +{ + unsigned int status; + + for (;;) { + status = serial8250_early_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + return; + cpu_relax(); + } +} + +static void __init serial_putc(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + serial8250_early_out(port, UART_TX, c); +} + +static void __init early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct earlycon_device *device = console->data; + struct uart_port *port = &device->port; + unsigned int ier; + + /* Save the IER and disable interrupts preserving the UUE bit */ + ier = serial8250_early_in(port, UART_IER); + if (ier) + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); + + uart_console_write(port, s, count, serial_putc); + + /* Wait for transmitter to become empty and restore the IER */ + wait_for_xmitr(port); + + if (ier) + serial8250_early_out(port, UART_IER, ier); +} + +static void __init init_port(struct earlycon_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + unsigned int ier; + + serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */ + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */ + serial8250_early_out(port, UART_FCR, 0); /* no fifo */ + serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud); + c = serial8250_early_in(port, UART_LCR); + serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB); + serial8250_early_out(port, UART_DLL, divisor & 0xff); + serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); +} + +static int __init early_serial8250_setup(struct earlycon_device *device, + const char *options) +{ + if (!(device->port.membase || device->port.iobase)) + return -ENODEV; + + if (!device->baud) { + struct uart_port *port = &device->port; + unsigned int ier; + + /* assume the device was initialized, only mask interrupts */ + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); + } else + init_port(device); + + device->con->write = early_serial8250_write; + return 0; +} +EARLYCON_DECLARE(uart8250, early_serial8250_setup); +EARLYCON_DECLARE(uart, early_serial8250_setup); diff --git a/kernel/drivers/tty/serial/8250/8250_em.c b/kernel/drivers/tty/serial/8250/8250_em.c new file mode 100644 index 000000000..0b6381214 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_em.c @@ -0,0 +1,170 @@ +/* + * Renesas Emma Mobile 8250 driver + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define UART_DLL_EM 9 +#define UART_DLM_EM 10 + +struct serial8250_em_priv { + struct clk *sclk; + int line; +}; + +static void serial8250_em_serial_out(struct uart_port *p, int offset, int value) +{ + switch (offset) { + case UART_TX: /* TX @ 0x00 */ + writeb(value, p->membase); + break; + case UART_FCR: /* FCR @ 0x0c (+1) */ + case UART_LCR: /* LCR @ 0x10 (+1) */ + case UART_MCR: /* MCR @ 0x14 (+1) */ + case UART_SCR: /* SCR @ 0x20 (+1) */ + writel(value, p->membase + ((offset + 1) << 2)); + break; + case UART_IER: /* IER @ 0x04 */ + value &= 0x0f; /* only 4 valid bits - not Xscale */ + /* fall-through */ + case UART_DLL_EM: /* DLL @ 0x24 (+9) */ + case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + writel(value, p->membase + (offset << 2)); + } +} + +static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset) +{ + switch (offset) { + case UART_RX: /* RX @ 0x00 */ + return readb(p->membase); + case UART_MCR: /* MCR @ 0x14 (+1) */ + case UART_LSR: /* LSR @ 0x18 (+1) */ + case UART_MSR: /* MSR @ 0x1c (+1) */ + case UART_SCR: /* SCR @ 0x20 (+1) */ + return readl(p->membase + ((offset + 1) << 2)); + case UART_IER: /* IER @ 0x04 */ + case UART_IIR: /* IIR @ 0x08 */ + case UART_DLL_EM: /* DLL @ 0x24 (+9) */ + case UART_DLM_EM: /* DLM @ 0x28 (+9) */ + return readl(p->membase + (offset << 2)); + } + return 0; +} + +static int serial8250_em_serial_dl_read(struct uart_8250_port *up) +{ + return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8; +} + +static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_out(up, UART_DLL_EM, value & 0xff); + serial_out(up, UART_DLM_EM, value >> 8 & 0xff); +} + +static int serial8250_em_probe(struct platform_device *pdev) +{ + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct serial8250_em_priv *priv; + struct uart_8250_port up; + int ret; + + if (!regs || !irq) { + dev_err(&pdev->dev, "missing registers or irq\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->sclk = devm_clk_get(&pdev->dev, "sclk"); + if (IS_ERR(priv->sclk)) { + dev_err(&pdev->dev, "unable to get clock\n"); + return PTR_ERR(priv->sclk); + } + + memset(&up, 0, sizeof(up)); + up.port.mapbase = regs->start; + up.port.irq = irq->start; + up.port.type = PORT_UNKNOWN; + up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP; + up.port.dev = &pdev->dev; + up.port.private_data = priv; + + clk_prepare_enable(priv->sclk); + up.port.uartclk = clk_get_rate(priv->sclk); + + up.port.iotype = UPIO_MEM32; + up.port.serial_in = serial8250_em_serial_in; + up.port.serial_out = serial8250_em_serial_out; + up.dl_read = serial8250_em_serial_dl_read; + up.dl_write = serial8250_em_serial_dl_write; + + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + clk_disable_unprepare(priv->sclk); + return ret; + } + + priv->line = ret; + platform_set_drvdata(pdev, priv); + return 0; +} + +static int serial8250_em_remove(struct platform_device *pdev) +{ + struct serial8250_em_priv *priv = platform_get_drvdata(pdev); + + serial8250_unregister_port(priv->line); + clk_disable_unprepare(priv->sclk); + return 0; +} + +static const struct of_device_id serial8250_em_dt_ids[] = { + { .compatible = "renesas,em-uart", }, + {}, +}; +MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids); + +static struct platform_driver serial8250_em_platform_driver = { + .driver = { + .name = "serial8250-em", + .of_match_table = serial8250_em_dt_ids, + }, + .probe = serial8250_em_probe, + .remove = serial8250_em_remove, +}; + +module_platform_driver(serial8250_em_platform_driver); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/tty/serial/8250/8250_exar_st16c554.c b/kernel/drivers/tty/serial/8250/8250_exar_st16c554.c new file mode 100644 index 000000000..bf53aabf9 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_exar_st16c554.c @@ -0,0 +1,50 @@ +/* + * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > + * Based on 8250_boca. + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port exar_data[] = { + PORT(0x100, 5), + PORT(0x108, 5), + PORT(0x110, 5), + PORT(0x118, 5), + { }, +}; + +static struct platform_device exar_device = { + .name = "serial8250", + .id = PLAT8250_DEV_EXAR_ST16C554, + .dev = { + .platform_data = exar_data, + }, +}; + +static int __init exar_init(void) +{ + return platform_device_register(&exar_device); +} + +module_init(exar_init); + +MODULE_AUTHOR("Paul B Schroeder"); +MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_fintek.c b/kernel/drivers/tty/serial/8250/8250_fintek.c new file mode 100644 index 000000000..5815e81b5 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_fintek.c @@ -0,0 +1,240 @@ +/* + * Probe for F81216A LPC to 4 UART + * + * Based on drivers/tty/serial/8250_pnp.c, by Russell King, et al + * + * Copyright (C) 2014 Ricardo Ribalda, Qtechnology A/S + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include "8250.h" + +#define ADDR_PORT 0x4E +#define DATA_PORT 0x4F +#define ENTRY_KEY 0x77 +#define EXIT_KEY 0xAA +#define CHIP_ID1 0x20 +#define CHIP_ID1_VAL 0x02 +#define CHIP_ID2 0x21 +#define CHIP_ID2_VAL 0x16 +#define VENDOR_ID1 0x23 +#define VENDOR_ID1_VAL 0x19 +#define VENDOR_ID2 0x24 +#define VENDOR_ID2_VAL 0x34 +#define LDN 0x7 + +#define RS485 0xF0 +#define RTS_INVERT BIT(5) +#define RS485_URA BIT(4) +#define RXW4C_IRA BIT(3) +#define TXW4C_IRA BIT(2) + +#define DRIVER_NAME "8250_fintek" + +static int fintek_8250_enter_key(void){ + + if (!request_muxed_region(ADDR_PORT, 2, DRIVER_NAME)) + return -EBUSY; + + outb(ENTRY_KEY, ADDR_PORT); + outb(ENTRY_KEY, ADDR_PORT); + return 0; +} + +static void fintek_8250_exit_key(void){ + + outb(EXIT_KEY, ADDR_PORT); + release_region(ADDR_PORT, 2); +} + +static int fintek_8250_get_index(resource_size_t base_addr) +{ + resource_size_t base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) + if (base_addr == base[i]) + return i; + + return -ENODEV; +} + +static int fintek_8250_check_id(void) +{ + + outb(CHIP_ID1, ADDR_PORT); + if (inb(DATA_PORT) != CHIP_ID1_VAL) + return -ENODEV; + + outb(CHIP_ID2, ADDR_PORT); + if (inb(DATA_PORT) != CHIP_ID2_VAL) + return -ENODEV; + + outb(VENDOR_ID1, ADDR_PORT); + if (inb(DATA_PORT) != VENDOR_ID1_VAL) + return -ENODEV; + + outb(VENDOR_ID2, ADDR_PORT); + if (inb(DATA_PORT) != VENDOR_ID2_VAL) + return -ENODEV; + + return 0; +} + +static int fintek_8250_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + uint8_t config = 0; + int index = fintek_8250_get_index(port->iobase); + + if (index < 0) + return -EINVAL; + + if (rs485->flags & SER_RS485_ENABLED) + memset(rs485->padding, 0, sizeof(rs485->padding)); + else + memset(rs485, 0, sizeof(*rs485)); + + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND; + + if (rs485->delay_rts_before_send) { + rs485->delay_rts_before_send = 1; + config |= TXW4C_IRA; + } + + if (rs485->delay_rts_after_send) { + rs485->delay_rts_after_send = 1; + config |= RXW4C_IRA; + } + + if ((!!(rs485->flags & SER_RS485_RTS_ON_SEND)) == + (!!(rs485->flags & SER_RS485_RTS_AFTER_SEND))) + rs485->flags &= SER_RS485_ENABLED; + else + config |= RS485_URA; + + if (rs485->flags & SER_RS485_RTS_ON_SEND) + config |= RTS_INVERT; + + if (fintek_8250_enter_key()) + return -EBUSY; + + outb(LDN, ADDR_PORT); + outb(index, DATA_PORT); + outb(RS485, ADDR_PORT); + outb(config, DATA_PORT); + fintek_8250_exit_key(); + + port->rs485 = *rs485; + + return 0; +} + +static int +fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + int line; + struct uart_8250_port uart; + int ret; + + if (!pnp_port_valid(dev, 0)) + return -ENODEV; + + if (fintek_8250_get_index(pnp_port_start(dev, 0)) < 0) + return -ENODEV; + + /* Enable configuration registers*/ + if (fintek_8250_enter_key()) + return -EBUSY; + + /*Check ID*/ + ret = fintek_8250_check_id(); + fintek_8250_exit_key(); + if (ret) + return ret; + + memset(&uart, 0, sizeof(uart)); + if (!pnp_irq_valid(dev, 0)) + return -ENODEV; + uart.port.irq = pnp_irq(dev, 0); + uart.port.iobase = pnp_port_start(dev, 0); + uart.port.iotype = UPIO_PORT; + uart.port.rs485_config = fintek_8250_rs485_config; + + uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + uart.port.flags |= UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &dev->dev; + + line = serial8250_register_8250_port(&uart); + if (line < 0) + return -ENODEV; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void fintek_8250_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int fintek_8250_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define fintek_8250_suspend NULL +#define fintek_8250_resume NULL +#endif /* CONFIG_PM */ + +static const struct pnp_device_id fintek_dev_table[] = { + /* Qtechnology Panel PC / IO1000 */ + { "PNP0501"}, + {} +}; + +MODULE_DEVICE_TABLE(pnp, fintek_dev_table); + +static struct pnp_driver fintek_8250_driver = { + .name = DRIVER_NAME, + .probe = fintek_8250_probe, + .remove = fintek_8250_remove, + .suspend = fintek_8250_suspend, + .resume = fintek_8250_resume, + .id_table = fintek_dev_table, +}; + +module_pnp_driver(fintek_8250_driver); +MODULE_DESCRIPTION("Fintek F812164 module"); +MODULE_AUTHOR("Ricardo Ribalda "); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_fourport.c b/kernel/drivers/tty/serial/8250/8250_fourport.c new file mode 100644 index 000000000..be1582609 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_fourport.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ + } + +static struct plat_serial8250_port fourport_data[] = { + PORT(0x1a0, 9), + PORT(0x1a8, 9), + PORT(0x1b0, 9), + PORT(0x1b8, 9), + PORT(0x2a0, 5), + PORT(0x2a8, 5), + PORT(0x2b0, 5), + PORT(0x2b8, 5), + { }, +}; + +static struct platform_device fourport_device = { + .name = "serial8250", + .id = PLAT8250_DEV_FOURPORT, + .dev = { + .platform_data = fourport_data, + }, +}; + +static int __init fourport_init(void) +{ + return platform_device_register(&fourport_device); +} + +module_init(fourport_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_fsl.c b/kernel/drivers/tty/serial/8250/8250_fsl.c new file mode 100644 index 000000000..c0533a57e --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_fsl.c @@ -0,0 +1,62 @@ +#include +#include + +#include "8250.h" + +/* + * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This isn't a full driver; it just provides an alternate IRQ + * handler to deal with an errata. Everything else is just + * using the bog standard 8250 support. + * + * We follow code flow of serial8250_default_handle_irq() but add + * a check for a break and insert a dummy read on the Rx for the + * immediately following IRQ event. + * + * We re-use the already existing "bug handling" lsr_saved_flags + * field to carry the "what we just did" information from the one + * IRQ event to the next one. + */ + +int fsl8250_handle_irq(struct uart_port *port) +{ + unsigned char lsr, orig_lsr; + unsigned long flags; + unsigned int iir; + struct uart_8250_port *up = up_to_u8250p(port); + + spin_lock_irqsave(&up->port.lock, flags); + + iir = port->serial_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return 0; + } + + /* This is the WAR; if last event was BRK, then read and return */ + if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { + up->lsr_saved_flags &= ~UART_LSR_BI; + port->serial_in(port, UART_RX); + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; + } + + lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR); + + if (lsr & (UART_LSR_DR | UART_LSR_BI)) + lsr = serial8250_rx_chars(up, lsr); + + serial8250_modem_status(up); + + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + + up->lsr_saved_flags = orig_lsr; + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; +} diff --git a/kernel/drivers/tty/serial/8250/8250_gsc.c b/kernel/drivers/tty/serial/8250/8250_gsc.c new file mode 100644 index 000000000..2e3ea1a70 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_gsc.c @@ -0,0 +1,129 @@ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox 2001-2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +static int __init serial_init_chip(struct parisc_device *dev) +{ + struct uart_8250_port uart; + unsigned long address; + int err; + +#ifdef CONFIG_64BIT + if (!dev->irq && (dev->id.sversion == 0xad)) + dev->irq = iosapic_serial_irq(dev); +#endif + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) + printk(KERN_INFO + "Serial: device 0x%llx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", + (unsigned long long)dev->hpa.start); + return -ENODEV; + } + + address = dev->hpa.start; + if (dev->id.sversion != 0x8d) + address += 0x800; + + memset(&uart, 0, sizeof(uart)); + uart.port.iotype = UPIO_MEM; + /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ + uart.port.uartclk = (dev->id.sversion != 0xad) ? + 7272727 : 1843200; + uart.port.mapbase = address; + uart.port.membase = ioremap_nocache(address, 16); + uart.port.irq = dev->irq; + uart.port.flags = UPF_BOOT_AUTOCONF; + uart.port.dev = &dev->dev; + + err = serial8250_register_8250_port(&uart); + if (err < 0) { + printk(KERN_WARNING + "serial8250_register_8250_port returned error %d\n", err); + iounmap(uart.port.membase); + return err; + } + + return 0; +} + +static struct parisc_device_id serial_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static struct parisc_device_id lasi_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +static int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_hp300.c b/kernel/drivers/tty/serial/8250/8250_hp300.c new file mode 100644 index 000000000..2891958cd --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_hp300.c @@ -0,0 +1,322 @@ +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong , May 2004. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) +#warning CONFIG_SERIAL_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port +{ + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = hpdca_remove_one, +}; + +#endif + +static unsigned int num_ports; + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + printk(KERN_INFO "Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) + return 0; + + printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) + printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct uart_8250_port uart; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&uart, 0, sizeof(uart)); + + /* Memory mapped I/O */ + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + uart.port.irq = d->ipl; + uart.port.uartclk = HPDCA_BAUD_BASE * 16; + uart.port.mapbase = (d->resource.start + UART_OFFSET); + uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE); + uart.port.regshift = 1; + uart.port.dev = &d->dev; + line = serial8250_register_8250_port(&uart); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" + " irq %d failed\n", d->scode, uart.port.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + num_ports++; + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct uart_8250_port uart; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + +#ifdef CONFIG_HPDCA + dio_register_driver(&hpdca_driver); +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's + * mapped to DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) + continue; +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&uart, 0, sizeof(uart)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ + | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + uart.port.irq = 0; + uart.port.uartclk = HPAPCI_BAUD_BASE * 16; + uart.port.mapbase = base; + uart.port.membase = (char *)(base + DIO_VIRADDRBASE); + uart.port.regshift = 2; + + line = serial8250_register_8250_port(&uart); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() APCI" + " %d irq %d failed\n", i, uart.port.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + serial8250_unregister_port(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + serial8250_unregister_port(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong "); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_hub6.c b/kernel/drivers/tty/serial/8250/8250_hub6.c new file mode 100644 index 000000000..a5c778e83 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_hub6.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define HUB6(card,port) \ + { \ + .iobase = 0x302, \ + .irq = 3, \ + .uartclk = 1843200, \ + .iotype = UPIO_HUB6, \ + .flags = UPF_BOOT_AUTOCONF, \ + .hub6 = (card) << 6 | (port) << 3 | 1, \ + } + +static struct plat_serial8250_port hub6_data[] = { + HUB6(0, 0), + HUB6(0, 1), + HUB6(0, 2), + HUB6(0, 3), + HUB6(0, 4), + HUB6(0, 5), + HUB6(1, 0), + HUB6(1, 1), + HUB6(1, 2), + HUB6(1, 3), + HUB6(1, 4), + HUB6(1, 5), + { }, +}; + +static struct platform_device hub6_device = { + .name = "serial8250", + .id = PLAT8250_DEV_HUB6, + .dev = { + .platform_data = hub6_data, + }, +}; + +static int __init hub6_init(void) +{ + return platform_device_register(&hub6_device); +} + +module_init(hub6_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/tty/serial/8250/8250_mtk.c b/kernel/drivers/tty/serial/8250/8250_mtk.c new file mode 100644 index 000000000..7a11fac77 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_mtk.c @@ -0,0 +1,294 @@ +/* + * Mediatek 8250 driver. + * + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define UART_MTK_HIGHS 0x09 /* Highspeed register */ +#define UART_MTK_SAMPLE_COUNT 0x0a /* Sample count register */ +#define UART_MTK_SAMPLE_POINT 0x0b /* Sample point register */ +#define MTK_UART_RATE_FIX 0x0d /* UART Rate Fix Register */ + +struct mtk8250_data { + int line; + struct clk *uart_clk; +}; + +static void +mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot; + + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + serial8250_do_set_termios(port, termios, old); + + /* + * Mediatek UARTs use an extra highspeed register (UART_MTK_HIGHS) + * + * We need to recalcualte the quot register, as the claculation depends + * on the vaule in the highspeed register. + * + * Some baudrates are not supported by the chip, so we use the next + * lower rate supported and update termios c_flag. + * + * If highspeed register is set to 3, we need to specify sample count + * and sample point to increase accuracy. If not, we reset the + * registers to their default values. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + + if (baud <= 115200) { + serial_port_out(port, UART_MTK_HIGHS, 0x0); + quot = uart_get_divisor(port, baud); + } else if (baud <= 576000) { + serial_port_out(port, UART_MTK_HIGHS, 0x2); + + /* Set to next lower baudrate supported */ + if ((baud == 500000) || (baud == 576000)) + baud = 460800; + quot = DIV_ROUND_UP(port->uartclk, 4 * baud); + } else { + serial_port_out(port, UART_MTK_HIGHS, 0x3); + + /* Set to highest baudrate supported */ + if (baud >= 1152000) + baud = 921600; + quot = DIV_ROUND_UP(port->uartclk, 256 * baud); + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&port->lock, flags); + + /* set DLAB we have cval saved in up->lcr from the call to the core */ + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + serial_dl_write(up, quot); + + /* reset DLAB */ + serial_port_out(port, UART_LCR, up->lcr); + + if (baud > 460800) { + unsigned int tmp; + + tmp = DIV_ROUND_CLOSEST(port->uartclk, quot * baud); + serial_port_out(port, UART_MTK_SAMPLE_COUNT, tmp - 1); + serial_port_out(port, UART_MTK_SAMPLE_POINT, + (tmp - 2) >> 1); + } else { + serial_port_out(port, UART_MTK_SAMPLE_COUNT, 0x00); + serial_port_out(port, UART_MTK_SAMPLE_POINT, 0xff); + } + + spin_unlock_irqrestore(&port->lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static void +mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + pm_runtime_put_sync_suspend(port->dev); +} + +static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, + struct mtk8250_data *data) +{ + int err; + struct device_node *np = pdev->dev.of_node; + + data->uart_clk = of_clk_get(np, 0); + if (IS_ERR(data->uart_clk)) { + dev_warn(&pdev->dev, "Can't get timer clock\n"); + return PTR_ERR(data->uart_clk); + } + + err = clk_prepare_enable(data->uart_clk); + if (err) { + dev_warn(&pdev->dev, "Can't prepare clock\n"); + clk_put(data->uart_clk); + return err; + } + p->uartclk = clk_get_rate(data->uart_clk); + + return 0; +} + +static int mtk8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct mtk8250_data *data; + int err; + + if (!regs || !irq) { + dev_err(&pdev->dev, "no registers/irq defined\n"); + return -EINVAL; + } + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (pdev->dev.of_node) { + err = mtk8250_probe_of(pdev, &uart.port, data); + if (err) + return err; + } else + return -ENODEV; + + spin_lock_init(&uart.port.lock); + uart.port.mapbase = regs->start; + uart.port.irq = irq->start; + uart.port.pm = mtk8250_do_pm; + uart.port.type = PORT_16550; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart.port.dev = &pdev->dev; + uart.port.iotype = UPIO_MEM32; + uart.port.regshift = 2; + uart.port.private_data = data; + uart.port.set_termios = mtk8250_set_termios; + + /* Disable Rate Fix function */ + writel(0x0, uart.port.membase + + (MTK_UART_RATE_FIX << uart.port.regshift)); + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) + return data->line; + + platform_set_drvdata(pdev, data); + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int mtk8250_remove(struct platform_device *pdev) +{ + struct mtk8250_data *data = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + + serial8250_unregister_port(data->line); + if (!IS_ERR(data->uart_clk)) { + clk_disable_unprepare(data->uart_clk); + clk_put(data->uart_clk); + } + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk8250_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->line); + + return 0; +} + +static int mtk8250_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->line); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int mtk8250_runtime_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->uart_clk)) + clk_disable_unprepare(data->uart_clk); + + return 0; +} + +static int mtk8250_runtime_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->uart_clk)) + clk_prepare_enable(data->uart_clk); + + return 0; +} +#endif + +static const struct dev_pm_ops mtk8250_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume) + SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume, + NULL) +}; + +static const struct of_device_id mtk8250_of_match[] = { + { .compatible = "mediatek,mt6577-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk8250_of_match); + +static struct platform_driver mtk8250_platform_driver = { + .driver = { + .name = "mt6577-uart", + .pm = &mtk8250_pm_ops, + .of_match_table = mtk8250_of_match, + }, + .probe = mtk8250_probe, + .remove = mtk8250_remove, +}; +module_platform_driver(mtk8250_platform_driver); + +MODULE_AUTHOR("Matthias Brugger"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Mediatek 8250 serial port driver"); diff --git a/kernel/drivers/tty/serial/8250/8250_omap.c b/kernel/drivers/tty/serial/8250/8250_omap.c new file mode 100644 index 000000000..dce1a2370 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_omap.c @@ -0,0 +1,1408 @@ +/* + * 8250-core based driver for the OMAP internal UART + * + * based on omap-serial.c, Copyright (C) 2010 Texas Instruments. + * + * Copyright (C) 2014 Sebastian Andrzej Siewior + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define DEFAULT_CLK_SPEED 48000000 + +#define UART_ERRATA_i202_MDR1_ACCESS (1 << 0) +#define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1) +#define OMAP_DMA_TX_KICK (1 << 2) + +#define OMAP_UART_FCR_RX_TRIG 6 +#define OMAP_UART_FCR_TX_TRIG 4 + +/* SCR register bitmasks */ +#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) +#define OMAP_UART_SCR_TX_EMPTY (1 << 3) +#define OMAP_UART_SCR_DMAMODE_MASK (3 << 1) +#define OMAP_UART_SCR_DMAMODE_1 (1 << 1) +#define OMAP_UART_SCR_DMAMODE_CTL (1 << 0) + +/* MVR register bitmasks */ +#define OMAP_UART_MVR_SCHEME_SHIFT 30 +#define OMAP_UART_LEGACY_MVR_MAJ_MASK 0xf0 +#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT 4 +#define OMAP_UART_LEGACY_MVR_MIN_MASK 0x0f +#define OMAP_UART_MVR_MAJ_MASK 0x700 +#define OMAP_UART_MVR_MAJ_SHIFT 8 +#define OMAP_UART_MVR_MIN_MASK 0x3f + +#define UART_TI752_TLR_TX 0 +#define UART_TI752_TLR_RX 4 + +#define TRIGGER_TLR_MASK(x) ((x & 0x3c) >> 2) +#define TRIGGER_FCR_MASK(x) (x & 3) + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x08 +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x02 + +#define OMAP_UART_WER_MOD_WKUP 0x7f +#define OMAP_UART_TX_WAKEUP_EN (1 << 7) + +#define TX_TRIGGER 1 +#define RX_TRIGGER 48 + +#define OMAP_UART_TCR_RESTORE(x) ((x / 4) << 4) +#define OMAP_UART_TCR_HALT(x) ((x / 4) << 0) + +#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) + +#define OMAP_UART_REV_46 0x0406 +#define OMAP_UART_REV_52 0x0502 +#define OMAP_UART_REV_63 0x0603 + +struct omap8250_priv { + int line; + u8 habit; + u8 mdr1; + u8 efr; + u8 scr; + u8 wer; + u8 xon; + u8 xoff; + u8 delayed_restore; + u16 quot; + + bool is_suspending; + int wakeirq; + int wakeups_enabled; + u32 latency; + u32 calc_latency; + struct pm_qos_request pm_qos_request; + struct work_struct qos_work; + struct uart_8250_dma omap8250_dma; +}; + +static u32 uart_read(struct uart_8250_port *up, u32 reg) +{ + return readl(up->port.membase + (reg << up->port.regshift)); +} + +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + u8 lcr; + + serial8250_do_set_mctrl(port, mctrl); + + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); +} + +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void omap_8250_mdr1_errataset(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + u8 timeout = 255; + u8 old_mdr1; + + old_mdr1 = serial_in(up, UART_OMAP_MDR1); + if (old_mdr1 == priv->mdr1) + return; + + serial_out(up, UART_OMAP_MDR1, priv->mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_in(up, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(up->port.dev, "Errata i202: timedout %x\n", + serial_in(up, UART_LSR)); + break; + } + udelay(1); + } +} + +static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud, + struct omap8250_priv *priv) +{ + unsigned int uartclk = port->uartclk; + unsigned int div_13, div_16; + unsigned int abs_d13, abs_d16; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) { + priv->quot = port->custom_divisor & 0xffff; + /* + * I assume that nobody is using this. But hey, if somebody + * would like to specify the divisor _and_ the mode then the + * driver is ready and waiting for it. + */ + if (port->custom_divisor & (1 << 16)) + priv->mdr1 = UART_OMAP_MDR1_13X_MODE; + else + priv->mdr1 = UART_OMAP_MDR1_16X_MODE; + return; + } + div_13 = DIV_ROUND_CLOSEST(uartclk, 13 * baud); + div_16 = DIV_ROUND_CLOSEST(uartclk, 16 * baud); + + if (!div_13) + div_13 = 1; + if (!div_16) + div_16 = 1; + + abs_d13 = abs(baud - uartclk / 13 / div_13); + abs_d16 = abs(baud - uartclk / 16 / div_16); + + if (abs_d13 >= abs_d16) { + priv->mdr1 = UART_OMAP_MDR1_16X_MODE; + priv->quot = div_16; + } else { + priv->mdr1 = UART_OMAP_MDR1_13X_MODE; + priv->quot = div_13; + } +} + +static void omap8250_update_scr(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + u8 old_scr; + + old_scr = serial_in(up, UART_OMAP_SCR); + if (old_scr == priv->scr) + return; + + /* + * The manual recommends not to enable the DMA mode selector in the SCR + * (instead of the FCR) register _and_ selecting the DMA mode as one + * register write because this may lead to malfunction. + */ + if (priv->scr & OMAP_UART_SCR_DMAMODE_MASK) + serial_out(up, UART_OMAP_SCR, + priv->scr & ~OMAP_UART_SCR_DMAMODE_MASK); + serial_out(up, UART_OMAP_SCR, priv->scr); +} + +static void omap8250_restore_regs(struct uart_8250_port *up) +{ + struct omap8250_priv *priv = up->port.private_data; + struct uart_8250_dma *dma = up->dma; + + if (dma && dma->tx_running) { + /* + * TCSANOW requests the change to occur immediately however if + * we have a TX-DMA operation in progress then it has been + * observed that it might stall and never complete. Therefore we + * delay DMA completes to prevent this hang from happen. + */ + priv->delayed_restore = 1; + return; + } + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, UART_MCR_TCRTLR); + serial_out(up, UART_FCR, up->fcr); + + omap8250_update_scr(up, priv); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_RESTORE(16) | + OMAP_UART_TCR_HALT(52)); + serial_out(up, UART_TI752_TLR, + TRIGGER_TLR_MASK(TX_TRIGGER) << UART_TI752_TLR_TX | + TRIGGER_TLR_MASK(RX_TRIGGER) << UART_TI752_TLR_RX); + + serial_out(up, UART_LCR, 0); + + /* drop TCR + TLR access, we setup XON/XOFF later */ + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_IER, up->ier); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_dl_write(up, priv->quot); + + serial_out(up, UART_EFR, priv->efr); + + /* Configure flow control */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_XON1, priv->xon); + serial_out(up, UART_XOFF1, priv->xoff); + + serial_out(up, UART_LCR, up->lcr); + /* need mode A for FCR */ + if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS) + omap_8250_mdr1_errataset(up, priv); + else + serial_out(up, UART_OMAP_MDR1, priv->mdr1); + up->port.ops->set_mctrl(&up->port, up->port.mctrl); +} + +/* + * OMAP can use "CLK / (16 or 13) / div" for baud rate. And then we have have + * some differences in how we want to handle flow control. + */ +static void omap_8250_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + struct omap8250_priv *priv = up->port.private_data; + unsigned char cval = 0; + unsigned int baud; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 13); + omap_8250_get_divisor(port, baud, priv); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + pm_runtime_get_sync(port->dev); + spin_lock_irq(&port->lock); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + up->lcr = cval; + /* Up to here it was mostly serial8250_do_set_termios() */ + + /* + * We enable TRIG_GRANU for RX and TX and additionaly we set + * SCR_TX_EMPTY bit. The result is the following: + * - RX_TRIGGER amount of bytes in the FIFO will cause an interrupt. + * - less than RX_TRIGGER number of bytes will also cause an interrupt + * once the UART decides that there no new bytes arriving. + * - Once THRE is enabled, the interrupt will be fired once the FIFO is + * empty - the trigger level is ignored here. + * + * Once DMA is enabled: + * - UART will assert the TX DMA line once there is room for TX_TRIGGER + * bytes in the TX FIFO. On each assert the DMA engine will move + * TX_TRIGGER bytes into the FIFO. + * - UART will assert the RX DMA line once there are RX_TRIGGER bytes in + * the FIFO and move RX_TRIGGER bytes. + * This is because threshold and trigger values are the same. + */ + up->fcr = UART_FCR_ENABLE_FIFO; + up->fcr |= TRIGGER_FCR_MASK(TX_TRIGGER) << OMAP_UART_FCR_TX_TRIG; + up->fcr |= TRIGGER_FCR_MASK(RX_TRIGGER) << OMAP_UART_FCR_RX_TRIG; + + priv->scr = OMAP_UART_SCR_RX_TRIG_GRANU1_MASK | OMAP_UART_SCR_TX_EMPTY | + OMAP_UART_SCR_TX_TRIG_GRANU1_MASK; + + if (up->dma) + priv->scr |= OMAP_UART_SCR_DMAMODE_1 | + OMAP_UART_SCR_DMAMODE_CTL; + + priv->xon = termios->c_cc[VSTART]; + priv->xoff = termios->c_cc[VSTOP]; + + priv->efr = 0; + up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY); + up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ + up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + priv->efr |= UART_EFR_CTS; + } else if (up->port.flags & UPF_SOFT_FLOW) { + /* + * IXON Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXON) + priv->efr |= OMAP_UART_SW_RX; + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXOFF) { + up->port.status |= UPSTAT_AUTOXOFF; + priv->efr |= OMAP_UART_SW_TX; + } + + /* + * IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= UART_MCR_XONANY; + } + omap8250_restore_regs(up); + + spin_unlock_irq(&up->port.lock); + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + + /* calculate wakeup latency constraint */ + priv->calc_latency = USEC_PER_SEC * 64 * 8 / baud; + priv->latency = priv->calc_latency; + + schedule_work(&priv->qos_work); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +/* same as 8250 except that we may have extra flow bits set in EFR */ +static void omap_8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u8 efr; + + pm_runtime_get_sync(port->dev); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +static void omap_serial_fill_features_erratas(struct uart_8250_port *up, + struct omap8250_priv *priv) +{ + u32 mvr, scheme; + u16 revision, major, minor; + + mvr = uart_read(up, UART_OMAP_MVER); + + /* Check revision register scheme */ + scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT; + + switch (scheme) { + case 0: /* Legacy Scheme: OMAP2/3 */ + /* MINOR_REV[0:4], MAJOR_REV[4:7] */ + major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >> + OMAP_UART_LEGACY_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK); + break; + case 1: + /* New Scheme: OMAP4+ */ + /* MINOR_REV[0:5], MAJOR_REV[8:10] */ + major = (mvr & OMAP_UART_MVR_MAJ_MASK) >> + OMAP_UART_MVR_MAJ_SHIFT; + minor = (mvr & OMAP_UART_MVR_MIN_MASK); + break; + default: + dev_warn(up->port.dev, + "Unknown revision, defaulting to highest\n"); + /* highest possible revision */ + major = 0xff; + minor = 0xff; + } + /* normalize revision for the driver */ + revision = UART_BUILD_REVISION(major, minor); + + switch (revision) { + case OMAP_UART_REV_46: + priv->habit = UART_ERRATA_i202_MDR1_ACCESS; + break; + case OMAP_UART_REV_52: + priv->habit = UART_ERRATA_i202_MDR1_ACCESS | + OMAP_UART_WER_HAS_TX_WAKEUP; + break; + case OMAP_UART_REV_63: + priv->habit = UART_ERRATA_i202_MDR1_ACCESS | + OMAP_UART_WER_HAS_TX_WAKEUP; + break; + default: + break; + } +} + +static void omap8250_uart_qos_work(struct work_struct *work) +{ + struct omap8250_priv *priv; + + priv = container_of(work, struct omap8250_priv, qos_work); + pm_qos_update_request(&priv->pm_qos_request, priv->latency); +} + +static irqreturn_t omap_wake_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + int ret; + + ret = port->handle_irq(port); + if (ret) + return IRQ_HANDLED; + return IRQ_NONE; +} + +#ifdef CONFIG_SERIAL_8250_DMA +static int omap_8250_dma_handle_irq(struct uart_port *port); +#endif + +static irqreturn_t omap8250_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir; + int ret; + +#ifdef CONFIG_SERIAL_8250_DMA + if (up->dma) { + ret = omap_8250_dma_handle_irq(port); + return IRQ_RETVAL(ret); + } +#endif + + serial8250_rpm_get(up); + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + serial8250_rpm_put(up); + + return IRQ_RETVAL(ret); +} + +static int omap_8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = port->private_data; + int ret; + + if (priv->wakeirq) { + ret = request_irq(priv->wakeirq, omap_wake_irq, + port->irqflags, "uart wakeup irq", port); + if (ret) + return ret; + disable_irq(priv->wakeirq); + } + + pm_runtime_get_sync(port->dev); + + up->mcr = 0; + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + if (up->dma) { + ret = serial8250_request_dma(up); + if (ret) { + dev_warn_ratelimited(port->dev, + "failed to request DMA\n"); + up->dma = NULL; + } + } + + ret = request_irq(port->irq, omap8250_irq, IRQF_SHARED, + dev_name(port->dev), port); + if (ret < 0) + goto err; + + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + +#ifdef CONFIG_PM + up->capabilities |= UART_CAP_RPM; +#endif + + /* Enable module level wake up */ + priv->wer = OMAP_UART_WER_MOD_WKUP; + if (priv->habit & OMAP_UART_WER_HAS_TX_WAKEUP) + priv->wer |= OMAP_UART_TX_WAKEUP_EN; + serial_out(up, UART_OMAP_WER, priv->wer); + + if (up->dma) + up->dma->rx_dma(up, 0); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + return 0; +err: + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + if (priv->wakeirq) + free_irq(priv->wakeirq, port); + return ret; +} + +static void omap_8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = port->private_data; + + flush_work(&priv->qos_work); + if (up->dma) + up->dma->rx_dma(up, UART_IIR_RX_TIMEOUT); + + pm_runtime_get_sync(port->dev); + + serial_out(up, UART_OMAP_WER, 0); + + up->ier = 0; + serial_out(up, UART_IER, 0); + + if (up->dma) + serial8250_release_dma(up); + + /* + * Disable break condition and FIFOs + */ + if (up->lcr & UART_LCR_SBC) + serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); + + free_irq(port->irq, port); + if (priv->wakeirq) + free_irq(priv->wakeirq, port); +} + +static void omap_8250_throttle(struct uart_port *port) +{ + unsigned long flags; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + pm_runtime_get_sync(port->dev); + + spin_lock_irqsave(&port->lock, flags); + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&port->lock, flags); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +static void omap_8250_unthrottle(struct uart_port *port) +{ + unsigned long flags; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + pm_runtime_get_sync(port->dev); + + spin_lock_irqsave(&port->lock, flags); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&port->lock, flags); + + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); +} + +#ifdef CONFIG_SERIAL_8250_DMA +static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir); + +static void __dma_rx_do_complete(struct uart_8250_port *p, bool error) +{ + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + int count; + + dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma->rx_running = 0; + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + dmaengine_terminate_all(dma->rxchan); + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + if (!error) + omap_8250_rx_dma(p, 0); + + tty_flip_buffer_push(tty_port); +} + +static void __dma_rx_complete(void *param) +{ + __dma_rx_do_complete(param, false); +} + +static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) +{ + struct uart_8250_dma *dma = p->dma; + struct dma_async_tx_descriptor *desc; + + switch (iir & 0x3f) { + case UART_IIR_RLSI: + /* 8250_core handles errors and break interrupts */ + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_do_complete(p, true); + } + return -EIO; + case UART_IIR_RX_TIMEOUT: + /* + * If RCVR FIFO trigger level was not reached, complete the + * transfer and let 8250_core copy the remaining data. + */ + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_do_complete(p, true); + } + return -ETIMEDOUT; + case UART_IIR_RDI: + /* + * The OMAP UART is a special BEAST. If we receive RDI we _have_ + * a DMA transfer programmed but it didn't work. One reason is + * that we were too slow and there were too many bytes in the + * FIFO, the UART counted wrong and never kicked the DMA engine + * to do anything. That means once we receive RDI on OMAP then + * the DMA won't do anything soon so we have to cancel the DMA + * transfer and purge the FIFO manually. + */ + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_do_complete(p, true); + } + return -ETIMEDOUT; + + default: + break; + } + + if (dma->rx_running) + return 0; + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EBUSY; + + dma->rx_running = 1; + desc->callback = __dma_rx_complete; + desc->callback_param = p; + + dma->rx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma_async_issue_pending(dma->rxchan); + return 0; +} + +static int omap_8250_tx_dma(struct uart_8250_port *p); + +static void omap_8250_dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + unsigned long flags; + bool en_thri = false; + struct omap8250_priv *priv = p->port.private_data; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + + xmit->tail += dma->tx_size; + xmit->tail &= UART_XMIT_SIZE - 1; + p->port.icount.tx += dma->tx_size; + + if (priv->delayed_restore) { + priv->delayed_restore = 0; + omap8250_restore_regs(p); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) { + int ret; + + ret = omap_8250_tx_dma(p); + if (ret) + en_thri = true; + + } else if (p->capabilities & UART_CAP_RPM) { + en_thri = true; + } + + if (en_thri) { + dma->tx_err = 1; + p->ier |= UART_IER_THRI; + serial_port_out(&p->port, UART_IER, p->ier); + } + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static int omap_8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct omap8250_priv *priv = p->port.private_data; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + unsigned int skip_byte = 0; + int ret; + + if (dma->tx_running) + return 0; + if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + + /* + * Even if no data, we need to return an error for the two cases + * below so serial8250_tx_chars() is invoked and properly clears + * THRI and/or runtime suspend. + */ + if (dma->tx_err || p->capabilities & UART_CAP_RPM) { + ret = -EBUSY; + goto err; + } + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } + return 0; + } + + dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (priv->habit & OMAP_DMA_TX_KICK) { + u8 tx_lvl; + + /* + * We need to put the first byte into the FIFO in order to start + * the DMA transfer. For transfers smaller than four bytes we + * don't bother doing DMA at all. It seem not matter if there + * are still bytes in the FIFO from the last transfer (in case + * we got here directly from omap_8250_dma_tx_complete()). Bytes + * leaving the FIFO seem not to trigger the DMA transfer. It is + * really the byte that we put into the FIFO. + * If the FIFO is already full then we most likely got here from + * omap_8250_dma_tx_complete(). And this means the DMA engine + * just completed its work. We don't have to wait the complete + * 86us at 115200,8n1 but around 60us (not to mention lower + * baudrates). So in that case we take the interrupt and try + * again with an empty FIFO. + */ + tx_lvl = serial_in(p, UART_OMAP_TX_LVL); + if (tx_lvl == p->tx_loadsz) { + ret = -EBUSY; + goto err; + } + if (dma->tx_size < 4) { + ret = -EINVAL; + goto err; + } + skip_byte = 1; + } + + desc = dmaengine_prep_slave_single(dma->txchan, + dma->tx_addr + xmit->tail + skip_byte, + dma->tx_size - skip_byte, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + ret = -EBUSY; + goto err; + } + + dma->tx_running = 1; + + desc->callback = omap_8250_dma_tx_complete; + desc->callback_param = p; + + dma->tx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + dma_async_issue_pending(dma->txchan); + if (dma->tx_err) + dma->tx_err = 0; + + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } + if (skip_byte) + serial_out(p, UART_TX, xmit->buf[xmit->tail]); + return 0; +err: + dma->tx_err = 1; + return ret; +} + +/* + * This is mostly serial8250_handle_irq(). We have a slightly different DMA + * hoook for RX/TX and need different logic for them in the ISR. Therefore we + * use the default routine in the non-DMA case and this one for with DMA. + */ +static int omap_8250_dma_handle_irq(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char status; + unsigned long flags; + u8 iir; + int dma_err = 0; + + serial8250_rpm_get(up); + + iir = serial_port_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + serial8250_rpm_put(up); + return 0; + } + + spin_lock_irqsave(&port->lock, flags); + + status = serial_port_in(port, UART_LSR); + + if (status & (UART_LSR_DR | UART_LSR_BI)) { + + dma_err = omap_8250_rx_dma(up, iir); + if (dma_err) { + status = serial8250_rx_chars(up, status); + omap_8250_rx_dma(up, 0); + } + } + serial8250_modem_status(up); + if (status & UART_LSR_THRE && up->dma->tx_err) { + if (uart_tx_stopped(&up->port) || + uart_circ_empty(&up->port.state->xmit)) { + up->dma->tx_err = 0; + serial8250_tx_chars(up); + } else { + /* + * try again due to an earlier failer which + * might have been resolved by now. + */ + dma_err = omap_8250_tx_dma(up); + if (dma_err) + serial8250_tx_chars(up); + } + } + + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + return 1; +} + +static bool the_no_dma_filter_fn(struct dma_chan *chan, void *param) +{ + return false; +} + +#else + +static inline int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) +{ + return -EINVAL; +} +#endif + +static int omap8250_no_handle_irq(struct uart_port *port) +{ + /* IRQ has not been requested but handling irq? */ + WARN_ONCE(1, "Unexpected irq handling before port startup\n"); + return 0; +} + +static int omap8250_probe(struct platform_device *pdev) +{ + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct omap8250_priv *priv; + struct uart_8250_port up; + int ret; + void __iomem *membase; + + if (!regs || !irq) { + dev_err(&pdev->dev, "missing registers or irq\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + membase = devm_ioremap_nocache(&pdev->dev, regs->start, + resource_size(regs)); + if (!membase) + return -ENODEV; + + memset(&up, 0, sizeof(up)); + up.port.dev = &pdev->dev; + up.port.mapbase = regs->start; + up.port.membase = membase; + up.port.irq = irq->start; + /* + * It claims to be 16C750 compatible however it is a little different. + * It has EFR and has no FCR7_64byte bit. The AFE (which it claims to + * have) is enabled via EFR instead of MCR. The type is set here 8250 + * just to get things going. UNKNOWN does not work for a few reasons and + * we don't need our own type since we don't use 8250's set_termios() + * or pm callback. + */ + up.port.type = PORT_8250; + up.port.iotype = UPIO_MEM; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | + UPF_HARD_FLOW; + up.port.private_data = priv; + + up.port.regshift = 2; + up.port.fifosize = 64; + up.tx_loadsz = 64; + up.capabilities = UART_CAP_FIFO; +#ifdef CONFIG_PM + /* + * Runtime PM is mostly transparent. However to do it right we need to a + * TX empty interrupt before we can put the device to auto idle. So if + * PM is not enabled we don't add that flag and can spare that one extra + * interrupt in the TX path. + */ + up.capabilities |= UART_CAP_RPM; +#endif + up.port.set_termios = omap_8250_set_termios; + up.port.set_mctrl = omap8250_set_mctrl; + up.port.pm = omap_8250_pm; + up.port.startup = omap_8250_startup; + up.port.shutdown = omap_8250_shutdown; + up.port.throttle = omap_8250_throttle; + up.port.unthrottle = omap_8250_unthrottle; + + if (pdev->dev.of_node) { + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &up.port.uartclk); + priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1); + } else { + ret = pdev->id; + } + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id\n"); + return ret; + } + up.port.line = ret; + + if (!up.port.uartclk) { + up.port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, + "No clock speed specified: using default: %d\n", + DEFAULT_CLK_SPEED); + } + + priv->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + priv->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + pm_qos_add_request(&priv->pm_qos_request, PM_QOS_CPU_DMA_LATENCY, + priv->latency); + INIT_WORK(&priv->qos_work, omap8250_uart_qos_work); + + device_init_wakeup(&pdev->dev, true); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, -1); + + pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + pm_runtime_get_sync(&pdev->dev); + + omap_serial_fill_features_erratas(&up, priv); + up.port.handle_irq = omap8250_no_handle_irq; +#ifdef CONFIG_SERIAL_8250_DMA + if (pdev->dev.of_node) { + /* + * Oh DMA support. If there are no DMA properties in the DT then + * we will fall back to a generic DMA channel which does not + * really work here. To ensure that we do not get a generic DMA + * channel assigned, we have the the_no_dma_filter_fn() here. + * To avoid "failed to request DMA" messages we check for DMA + * properties in DT. + */ + ret = of_property_count_strings(pdev->dev.of_node, "dma-names"); + if (ret == 2) { + up.dma = &priv->omap8250_dma; + priv->omap8250_dma.fn = the_no_dma_filter_fn; + priv->omap8250_dma.tx_dma = omap_8250_tx_dma; + priv->omap8250_dma.rx_dma = omap_8250_rx_dma; + priv->omap8250_dma.rx_size = RX_TRIGGER; + priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER; + priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER; + + if (of_machine_is_compatible("ti,am33xx")) + priv->habit |= OMAP_DMA_TX_KICK; + } + } +#endif + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + goto err; + } + priv->line = ret; + platform_set_drvdata(pdev, priv); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + return 0; +err: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; +} + +static int omap8250_remove(struct platform_device *pdev) +{ + struct omap8250_priv *priv = platform_get_drvdata(pdev); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + serial8250_unregister_port(priv->line); + pm_qos_remove_request(&priv->pm_qos_request); + device_init_wakeup(&pdev->dev, false); + return 0; +} + +#ifdef CONFIG_PM + +static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv, + bool enable) +{ + if (!priv->wakeirq) + return; + + if (enable) + enable_irq(priv->wakeirq); + else + disable_irq_nosync(priv->wakeirq); +} + +static void omap8250_enable_wakeup(struct omap8250_priv *priv, + bool enable) +{ + if (enable == priv->wakeups_enabled) + return; + + omap8250_enable_wakeirq(priv, enable); + priv->wakeups_enabled = enable; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int omap8250_prepare(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return 0; + priv->is_suspending = true; + return 0; +} + +static void omap8250_complete(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return; + priv->is_suspending = false; +} + +static int omap8250_suspend(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + serial8250_suspend_port(priv->line); + flush_work(&priv->qos_work); + + if (device_may_wakeup(dev)) + omap8250_enable_wakeup(priv, true); + else + omap8250_enable_wakeup(priv, false); + return 0; +} + +static int omap8250_resume(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + omap8250_enable_wakeup(priv, false); + + serial8250_resume_port(priv->line); + return 0; +} +#else +#define omap8250_prepare NULL +#define omap8250_complete NULL +#endif + +#ifdef CONFIG_PM +static int omap8250_lost_context(struct uart_8250_port *up) +{ + u32 val; + + val = serial_in(up, UART_OMAP_MDR1); + /* + * If we lose context, then MDR1 is set to its reset value which is + * UART_OMAP_MDR1_DISABLE. After set_termios() we set it either to 13x + * or 16x but never to disable again. + */ + if (val == UART_OMAP_MDR1_DISABLE) + return 1; + return 0; +} + +static int omap8250_runtime_suspend(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up; + + up = serial8250_get_port(priv->line); + /* + * When using 'no_console_suspend', the console UART must not be + * suspended. Since driver suspend is managed by runtime suspend, + * preventing runtime suspend (by returning error) will keep device + * active during suspend. + */ + if (priv->is_suspending && !console_suspend_enabled) { + if (uart_console(&up->port)) + return -EBUSY; + } + + omap8250_enable_wakeup(priv, true); + if (up->dma) + omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT); + + priv->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + schedule_work(&priv->qos_work); + + return 0; +} + +static int omap8250_runtime_resume(struct device *dev) +{ + struct omap8250_priv *priv = dev_get_drvdata(dev); + struct uart_8250_port *up; + int loss_cntx; + + /* In case runtime-pm tries this before we are setup */ + if (!priv) + return 0; + + up = serial8250_get_port(priv->line); + omap8250_enable_wakeup(priv, false); + loss_cntx = omap8250_lost_context(up); + + if (loss_cntx) + omap8250_restore_regs(up); + + if (up->dma) + omap_8250_rx_dma(up, 0); + + priv->latency = priv->calc_latency; + schedule_work(&priv->qos_work); + return 0; +} +#endif + +#ifdef CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP +static int __init omap8250_console_fixup(void) +{ + char *omap_str; + char *options; + u8 idx; + + if (strstr(boot_command_line, "console=ttyS")) + /* user set a ttyS based name for the console */ + return 0; + + omap_str = strstr(boot_command_line, "console=ttyO"); + if (!omap_str) + /* user did not set ttyO based console, so we don't care */ + return 0; + + omap_str += 12; + if ('0' <= *omap_str && *omap_str <= '9') + idx = *omap_str - '0'; + else + return 0; + + omap_str++; + if (omap_str[0] == ',') { + omap_str++; + options = omap_str; + } else { + options = NULL; + } + + add_preferred_console("ttyS", idx, options); + pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + idx, idx); + pr_err("This ensures that you still see kernel messages. Please\n"); + pr_err("update your kernel commandline.\n"); + return 0; +} +console_initcall(omap8250_console_fixup); +#endif + +static const struct dev_pm_ops omap8250_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume) + SET_RUNTIME_PM_OPS(omap8250_runtime_suspend, + omap8250_runtime_resume, NULL) + .prepare = omap8250_prepare, + .complete = omap8250_complete, +}; + +static const struct of_device_id omap8250_dt_ids[] = { + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap8250_dt_ids); + +static struct platform_driver omap8250_platform_driver = { + .driver = { + .name = "omap8250", + .pm = &omap8250_dev_pm_ops, + .of_match_table = omap8250_dt_ids, + }, + .probe = omap8250_probe, + .remove = omap8250_remove, +}; +module_platform_driver(omap8250_platform_driver); + +MODULE_AUTHOR("Sebastian Andrzej Siewior"); +MODULE_DESCRIPTION("OMAP 8250 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/tty/serial/8250/8250_pci.c b/kernel/drivers/tty/serial/8250/8250_pci.c new file mode 100644 index 000000000..46bcebba5 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_pci.c @@ -0,0 +1,5724 @@ +/* + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#undef DEBUG +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "8250.h" + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*probe)(struct pci_dev *dev); + int (*init)(struct pci_dev *dev); + int (*setup)(struct serial_private *, + const struct pciserial_board *, + struct uart_8250_port *, int); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + struct pci_dev *dev; + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static int pci_default_setup(struct serial_private*, + const struct pciserial_board*, struct uart_8250_port *, int); + +static void moan_device(const char *str, struct pci_dev *dev) +{ + dev_err(&dev->dev, + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to .\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct serial_private *priv, struct uart_8250_port *port, + int bar, int offset, int regshift) +{ + struct pci_dev *dev = priv->dev; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = pci_ioremap_bar(dev, bar); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->port.iotype = UPIO_MEM; + port->port.iobase = 0; + port->port.mapbase = pci_resource_start(dev, bar) + offset; + port->port.membase = priv->remapped_bar[bar] + offset; + port->port.regshift = regshift; + } else { + port->port.iotype = UPIO_PORT; + port->port.iobase = pci_resource_start(dev, bar) + offset; + port->port.mapbase = 0; + port->port.membase = NULL; + port->port.regshift = 0; + } + return 0; +} + +/* + * ADDI-DATA GmbH communication cards + */ +static int addidata_apci7800_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + bar = FL_GET_BASE(board->flags); + + if (idx < 2) { + offset += idx * board->uart_offset; + } else if ((idx >= 2) && (idx < 4)) { + bar += 1; + offset += ((idx - 2) * board->uart_offset); + } else if ((idx >= 4) && (idx < 6)) { + bar += 2; + offset += ((idx - 4) * board->uart_offset); + } else if (idx >= 6) { + bar += 3; + offset += ((idx - 6) * board->uart_offset); + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (priv->dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int pci_inteli960ni_init(struct pci_dev *dev) +{ + u32 oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, &oldval); + if (oldval == 0x00001000L) { /* RESET value */ + dev_dbg(&dev->dev, "Local i960 firmware missing\n"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) + irq_config = 0x43; + + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + /* + * enable/disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +#define NI8420_INT_ENABLE_REG 0x38 +#define NI8420_INT_ENABLE_BIT 0x2000 + +static void pci_ni8420_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), + p + NI8420_INT_ENABLE_REG); + iounmap(p); +} + + +/* MITE registers */ +#define MITE_IOWBSR1 0xc4 +#define MITE_IOWCR1 0xf4 +#define MITE_LCIMR1 0x08 +#define MITE_LCIMR2 0x10 + +#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) + +static void pci_ni8430_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); + iounmap(p); +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10, p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0, p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) + writeb(0, p + OCT_REG_CR_OFF); + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equipped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin , 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + +static int pci_siig_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; + + if (idx > 3) { + bar = 4; + offset = (idx - 4) * 8; + } + + return setup_port(priv, port, bar, offset, 0); +} + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static const unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static const unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static const unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static const unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static const struct timedia_struct { + int num; + const unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port } +}; + +/* + * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of + * listing them individually, this driver merely grabs them all with + * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, + * and should be left free to be claimed by parport_serial instead. + */ +static int pci_timedia_probe(struct pci_dev *dev) +{ + /* + * Check the third digit of the subdevice ID + * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) + */ + if ((dev->subsystem_device & 0x00f0) >= 0x70) { + dev_info(&dev->dev, + "ignoring Timedia subdevice %04x for parport_serial\n", + dev->subsystem_device); + return -ENODEV; + } + + return 0; +} + +static int pci_timedia_init(struct pci_dev *dev) +{ + const unsigned short *ids; + int i, j; + + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + /* FALLTHROUGH */ + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int pci_ni8420_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return -ENOMEM; + + /* Enable CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, + p + NI8420_INT_ENABLE_REG); + + iounmap(p); + return 0; +} + +#define MITE_IOWBSR1_WSIZE 0xa +#define MITE_IOWBSR1_WIN_OFFSET 0x800 +#define MITE_IOWBSR1_WENAB (1 << 7) +#define MITE_LCIMR1_IO_IE_0 (1 << 24) +#define MITE_LCIMR2_SET_CPU_IE (1 << 31) +#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe + +static int pci_ni8430_init(struct pci_dev *dev) +{ + void __iomem *p; + struct pci_bus_region region; + u32 device_window; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + p = pci_ioremap_bar(dev, bar); + if (p == NULL) + return -ENOMEM; + + /* + * Set device window address and size in BAR0, while acknowledging that + * the resource structure may contain a translated address that differs + * from the address the device responds to. + */ + pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); + device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) + | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; + writel(device_window, p + MITE_IOWBSR1); + + /* Set window access to go to RAMSEL IO address space */ + writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), + p + MITE_IOWCR1); + + /* Enable IO Bus Interrupt 0 */ + writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); + + /* Enable CPU Interrupt */ + writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); + + iounmap(p); + return 0; +} + +/* UART Port Control Register */ +#define NI8430_PORTCON 0x0f +#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) + +static int +pci_ni8430_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *dev = priv->dev; + void __iomem *p; + unsigned int bar, offset = board->first_offset; + + if (idx >= board->num_ports) + return 1; + + bar = FL_GET_BASE(board->flags); + offset += idx * board->uart_offset; + + p = pci_ioremap_bar(dev, bar); + if (!p) + return -ENOMEM; + + /* enable the transceiver */ + writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, + p + offset + NI8430_PORTCON); + + iounmap(p); + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_netmos_9900_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar; + + if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && + (priv->dev->subsystem_device & 0xff00) == 0x3000) { + /* netmos apparently orders BARs by datasheet layout, so serial + * ports get BARs 0 and 3 (or 1 and 4 for memmapped) + */ + bar = 3 * idx; + + return setup_port(priv, port, bar, 0, board->reg_shift); + } else { + return pci_default_setup(priv, board, port, idx); + } +} + +/* the 99xx series comes with a range of device IDs and a variety + * of capabilities: + * + * 9900 has varying capabilities and can cascade to sub-controllers + * (cascading should be purely internal) + * 9904 is hardwired with 4 serial ports + * 9912 and 9922 are hardwired with 2 serial ports + */ +static int pci_netmos_9900_numports(struct pci_dev *dev) +{ + unsigned int c = dev->class; + unsigned int pi; + unsigned short sub_serports; + + pi = (c & 0xff); + + if (pi == 2) { + return 1; + } else if ((pi == 0) && + (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { + /* two possibilities: 0x30ps encodes number of parallel and + * serial ports, or 0x1000 indicates *something*. This is not + * immediately obvious, since the 2s1p+4s configuration seems + * to offer all functionality on functions 0..2, while still + * advertising the same function 3 as the 4s+2s1p config. + */ + sub_serports = dev->subsystem_device & 0xf; + if (sub_serports > 0) { + return sub_serports; + } else { + dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); + return 0; + } + } + + moan_device("unknown NetMos/Mostech program interface", dev); + return 0; +} + +static int pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means

parallel, serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) + return 0; + + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return 0; + + switch (dev->device) { /* FALLTHROUGH on all */ + case PCI_DEVICE_ID_NETMOS_9904: + case PCI_DEVICE_ID_NETMOS_9912: + case PCI_DEVICE_ID_NETMOS_9922: + case PCI_DEVICE_ID_NETMOS_9900: + num_serial = pci_netmos_9900_numports(dev); + break; + + default: + if (num_serial == 0 ) { + moan_device("unknown NetMos/Mostech device", dev); + } + } + + if (num_serial == 0) + return -ENODEV; + + return num_serial; +} + +/* + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +static int pci_ite887x_init(struct pci_dev *dev) +{ + /* inta_addr are the configuration addresses of the ITE */ + static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, + 0x200, 0x280, 0 }; + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + i = 0; + while (inta_addr[i] && iobase == NULL) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + iobase = NULL; + } + i++; + } + + if (!inta_addr[i]) { + dev_err(&dev->dev, "ite887x: could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + +/* + * EndRun Technologies. + * Determine the number of ports available on the device. + */ +#define PCI_VENDOR_ID_ENDRUN 0x7401 +#define PCI_DEVICE_ID_ENDRUN_1588 0xe100 + +static int pci_endrun_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* EndRun device is all 0xexxx */ + if (dev->vendor == PCI_VENDOR_ID_ENDRUN && + (dev->device & 0xf000) != 0xe000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* EndRun device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + dev_dbg(&dev->dev, + "%d ports detected on EndRun PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + dev_dbg(&dev->dev, + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + +static int pci_asix_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->bugs |= UART_BUG_PARITY; + return pci_default_setup(priv, board, port, idx); +} + +/* Quatech devices have their own extra interface features */ + +struct quatech_feature { + u16 devid; + bool amcc; +}; + +#define QPCR_TEST_FOR1 0x3F +#define QPCR_TEST_GET1 0x00 +#define QPCR_TEST_FOR2 0x40 +#define QPCR_TEST_GET2 0x40 +#define QPCR_TEST_FOR3 0x80 +#define QPCR_TEST_GET3 0x40 +#define QPCR_TEST_FOR4 0xC0 +#define QPCR_TEST_GET4 0x80 + +#define QOPR_CLOCK_X1 0x0000 +#define QOPR_CLOCK_X2 0x0001 +#define QOPR_CLOCK_X4 0x0002 +#define QOPR_CLOCK_X8 0x0003 +#define QOPR_CLOCK_RATE_MASK 0x0003 + + +static struct quatech_feature quatech_cards[] = { + { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, + { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, + { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, + { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, + { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, + { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, + { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, + { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, + { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, + { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, + { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, + { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, + { 0, } +}; + +static int pci_quatech_amcc(u16 devid) +{ + struct quatech_feature *qf = &quatech_cards[0]; + while (qf->devid) { + if (qf->devid == devid) + return qf->amcc; + qf++; + } + pr_err("quatech: unknown port type '0x%04X'.\n", devid); + return 0; +}; + +static int pci_quatech_rqopr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(LCR, base + UART_LCR); + return val; +} + +static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(qopr, base + UART_SCR); + outb(LCR, base + UART_LCR); +} + +static int pci_quatech_rqmcr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val, qmcr; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(val | 0x10, base + UART_SCR); + qmcr = inb(base + UART_MCR); + outb(val, base + UART_SCR); + outb(LCR, base + UART_LCR); + + return qmcr; +} + +static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + outb(val | 0x10, base + UART_SCR); + outb(qmcr, base + UART_MCR); + outb(val, base + UART_SCR); + outb(LCR, base + UART_LCR); +} + +static int pci_quatech_has_qmcr(struct uart_8250_port *port) +{ + unsigned long base = port->port.iobase; + u8 LCR, val; + + LCR = inb(base + UART_LCR); + outb(0xBF, base + UART_LCR); + val = inb(base + UART_SCR); + if (val & 0x20) { + outb(0x80, UART_LCR); + if (!(inb(UART_SCR) & 0x20)) { + outb(LCR, base + UART_LCR); + return 1; + } + } + return 0; +} + +static int pci_quatech_test(struct uart_8250_port *port) +{ + u8 reg; + u8 qopr = pci_quatech_rqopr(port); + pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET1) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET2) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET3) + return -EINVAL; + pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); + reg = pci_quatech_rqopr(port) & 0xC0; + if (reg != QPCR_TEST_GET4) + return -EINVAL; + + pci_quatech_wqopr(port, qopr); + return 0; +} + +static int pci_quatech_clock(struct uart_8250_port *port) +{ + u8 qopr, reg, set; + unsigned long clock; + + if (pci_quatech_test(port) < 0) + return 1843200; + + qopr = pci_quatech_rqopr(port); + + pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); + reg = pci_quatech_rqopr(port); + if (reg & QOPR_CLOCK_X8) { + clock = 1843200; + goto out; + } + pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); + reg = pci_quatech_rqopr(port); + if (!(reg & QOPR_CLOCK_X8)) { + clock = 1843200; + goto out; + } + reg &= QOPR_CLOCK_X8; + if (reg == QOPR_CLOCK_X2) { + clock = 3685400; + set = QOPR_CLOCK_X2; + } else if (reg == QOPR_CLOCK_X4) { + clock = 7372800; + set = QOPR_CLOCK_X4; + } else if (reg == QOPR_CLOCK_X8) { + clock = 14745600; + set = QOPR_CLOCK_X8; + } else { + clock = 1843200; + set = QOPR_CLOCK_X1; + } + qopr &= ~QOPR_CLOCK_RATE_MASK; + qopr |= set; + +out: + pci_quatech_wqopr(port, qopr); + return clock; +} + +static int pci_quatech_rs422(struct uart_8250_port *port) +{ + u8 qmcr; + int rs422 = 0; + + if (!pci_quatech_has_qmcr(port)) + return 0; + qmcr = pci_quatech_rqmcr(port); + pci_quatech_wqmcr(port, 0xFF); + if (pci_quatech_rqmcr(port)) + rs422 = 1; + pci_quatech_wqmcr(port, qmcr); + return rs422; +} + +static int pci_quatech_init(struct pci_dev *dev) +{ + if (pci_quatech_amcc(dev->device)) { + unsigned long base = pci_resource_start(dev, 0); + if (base) { + u32 tmp; + outl(inl(base + 0x38) | 0x00002000, base + 0x38); + tmp = inl(base + 0x3c); + outl(tmp | 0x01000000, base + 0x3c); + outl(tmp &= ~0x01000000, base + 0x3c); + } + } + return 0; +} + +static int pci_quatech_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + /* Needed by pci_quatech calls below */ + port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); + /* Set up the clocking */ + port->port.uartclk = pci_quatech_clock(port); + /* For now just warn about RS422 */ + if (pci_quatech_rs422(port)) + pr_warn("quatech: software control of RS422 features not currently supported.\n"); + return pci_default_setup(priv, board, port, idx); +} + +static void pci_quatech_exit(struct pci_dev *dev) +{ +} + +static int pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_pericom_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + port->port.uartclk = 14745600; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int +ce4100_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret; + + ret = setup_port(priv, port, idx, 0, board->reg_shift); + port->port.iotype = UPIO_MEM32; + port->port.type = PORT_XSCALE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->port.regshift = 2; + + return ret; +} + +#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a +#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c + +#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a +#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c + +#define BYT_PRV_CLK 0x800 +#define BYT_PRV_CLK_EN (1 << 0) +#define BYT_PRV_CLK_M_VAL_SHIFT 1 +#define BYT_PRV_CLK_N_VAL_SHIFT 16 +#define BYT_PRV_CLK_UPDATE (1 << 31) + +#define BYT_TX_OVF_INT 0x820 +#define BYT_TX_OVF_INT_MASK (1 << 1) + +static void +byt_set_termios(struct uart_port *p, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + unsigned long fref = 100000000, fuart = baud * 16; + unsigned long w = BIT(15) - 1; + unsigned long m, n; + u32 reg; + + /* Get Fuart closer to Fref */ + fuart *= rounddown_pow_of_two(fref / fuart); + + /* + * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the + * dividers must be adjusted. + * + * uartclk = (m / n) * 100 MHz, where m <= n + */ + rational_best_approximation(fuart, fref, w, w, &m, &n); + p->uartclk = fuart; + + /* Reset the clock */ + reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT); + writel(reg, p->membase + BYT_PRV_CLK); + reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; + writel(reg, p->membase + BYT_PRV_CLK); + + serial8250_do_set_termios(p, termios, old); +} + +static bool byt_dma_filter(struct dma_chan *chan, void *param) +{ + struct dw_dma_slave *dws = param; + + if (dws->dma_dev != chan->device->dev) + return false; + + chan->private = dws; + return true; +} + +static int +byt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + struct device *dev = port->port.dev; + struct uart_8250_dma *dma; + struct dw_dma_slave *tx_param, *rx_param; + struct pci_dev *dma_dev; + int ret; + + dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); + if (!dma) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_BYT_UART1: + case PCI_DEVICE_ID_INTEL_BSW_UART1: + rx_param->src_id = 3; + tx_param->dst_id = 2; + break; + case PCI_DEVICE_ID_INTEL_BYT_UART2: + case PCI_DEVICE_ID_INTEL_BSW_UART2: + rx_param->src_id = 5; + tx_param->dst_id = 4; + break; + default: + return -EINVAL; + } + + rx_param->src_master = 1; + rx_param->dst_master = 0; + + dma->rxconf.src_maxburst = 16; + + tx_param->src_master = 1; + tx_param->dst_master = 0; + + dma->txconf.dst_maxburst = 16; + + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + rx_param->dma_dev = &dma_dev->dev; + tx_param->dma_dev = &dma_dev->dev; + + dma->fn = byt_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + ret = pci_default_setup(priv, board, port, idx); + port->port.iotype = UPIO_MEM; + port->port.type = PORT_16550A; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->port.set_termios = byt_set_termios; + port->port.fifosize = 64; + port->tx_loadsz = 64; + port->dma = dma; + port->capabilities = UART_CAP_FIFO | UART_CAP_AFE; + + /* Disable Tx counter interrupts */ + writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT); + + return ret; +} + +#define INTEL_MID_UART_PS 0x30 +#define INTEL_MID_UART_MUL 0x34 +#define INTEL_MID_UART_DIV 0x38 + +static void intel_mid_set_termios(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old, + unsigned long fref) +{ + unsigned int baud = tty_termios_baud_rate(termios); + unsigned short ps = 16; + unsigned long fuart = baud * ps; + unsigned long w = BIT(24) - 1; + unsigned long mul, div; + + if (fref < fuart) { + /* Find prescaler value that satisfies Fuart < Fref */ + if (fref > baud) + ps = fref / baud; /* baud rate too high */ + else + ps = 1; /* PLL case */ + fuart = baud * ps; + } else { + /* Get Fuart closer to Fref */ + fuart *= rounddown_pow_of_two(fref / fuart); + } + + rational_best_approximation(fuart, fref, w, w, &mul, &div); + p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */ + + writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ + writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ + writel(div, p->membase + INTEL_MID_UART_DIV); + + serial8250_do_set_termios(p, termios, old); +} + +static void intel_mid_set_termios_38_4M(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old) +{ + intel_mid_set_termios(p, termios, old, 38400000); +} + +static void intel_mid_set_termios_50M(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old) +{ + /* + * The uart clk is 50Mhz, and the baud rate come from: + * baud = 50M * MUL / (DIV * PS * DLAB) + */ + intel_mid_set_termios(p, termios, old, 50000000); +} + +static bool intel_mid_dma_filter(struct dma_chan *chan, void *param) +{ + struct hsu_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) + return false; + + chan->private = s; + return true; +} + +static int intel_mid_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx, + int index, struct pci_dev *dma_dev) +{ + struct device *dev = port->port.dev; + struct uart_8250_dma *dma; + struct hsu_dma_slave *tx_param, *rx_param; + + dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); + if (!dma) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + rx_param->chan_id = index * 2 + 1; + tx_param->chan_id = index * 2; + + dma->rxconf.src_maxburst = 64; + dma->txconf.dst_maxburst = 64; + + rx_param->dma_dev = &dma_dev->dev; + tx_param->dma_dev = &dma_dev->dev; + + dma->fn = intel_mid_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + port->port.type = PORT_16750; + port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; + port->dma = dma; + + return pci_default_setup(priv, board, port, idx); +} + +#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b +#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c +#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d + +static int pnw_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + struct pci_dev *dma_dev; + int index; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_PNW_UART1: + index = 0; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART2: + index = 1; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART3: + index = 2; + break; + default: + return -EINVAL; + } + + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); + + port->port.set_termios = intel_mid_set_termios_50M; + + return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); +} + +#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191 + +static int tng_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + struct pci_dev *dma_dev; + int index = PCI_FUNC(pdev->devfn); + + /* Currently no support for HSU port0 */ + if (index-- == 0) + return -ENODEV; + + dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); + + port->port.set_termios = intel_mid_set_termios_38_4M; + + return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); +} + +static int +pci_omegapci_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + return setup_port(priv, port, 2, idx * 8, 0); +} + +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + +static int pci_fintek_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + struct pci_dev *pdev = priv->dev; + u8 config_base; + u16 iobase; + + config_base = 0x40 + 0x08 * idx; + + /* Get the io address from configuration space */ + pci_read_config_word(pdev, config_base + 4, &iobase); + + dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); + + port->port.iotype = UPIO_PORT; + port->port.iobase = iobase; + + return 0; +} + +static int pci_fintek_init(struct pci_dev *dev) +{ + unsigned long iobase; + u32 max_port, i; + u32 bar_data[3]; + u8 config_base; + + switch (dev->device) { + case 0x1104: /* 4 ports */ + case 0x1108: /* 8 ports */ + max_port = dev->device & 0xff; + break; + case 0x1112: /* 12 ports */ + max_port = 12; + break; + default: + return -EINVAL; + } + + /* Get the io address dispatch from the BIOS */ + pci_read_config_dword(dev, 0x24, &bar_data[0]); + pci_read_config_dword(dev, 0x20, &bar_data[1]); + pci_read_config_dword(dev, 0x1c, &bar_data[2]); + + for (i = 0; i < max_port; ++i) { + /* UART0 configuration offset start from 0x40 */ + config_base = 0x40 + 0x08 * i; + + /* Calculate Real IO Port */ + iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; + + /* Enable UART I/O port */ + pci_write_config_byte(dev, config_base + 0x00, 0x01); + + /* Select 128-byte FIFO and 8x FIFO threshold */ + pci_write_config_byte(dev, config_base + 0x01, 0x33); + + /* LSB UART */ + pci_write_config_byte(dev, config_base + 0x04, + (u8)(iobase & 0xff)); + + /* MSB UART */ + pci_write_config_byte(dev, config_base + 0x05, + (u8)((iobase & 0xff00) >> 8)); + + pci_write_config_byte(dev, config_base + 0x06, dev->irq); + } + + return max_port; +} + +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_NO_TXEN_TEST; + dev_dbg(&priv->dev->dev, + "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, priv->dev->device, + priv->dev->subsystem_vendor, priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + +static void kt_handle_break(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + /* + * On receipt of a BI, serial device in Intel ME (Intel + * management engine) needs to have its fifos cleared for sane + * SOL (Serial Over Lan) output. + */ + serial8250_clear_and_reinit_fifos(up); +} + +static unsigned int kt_serial_in(struct uart_port *p, int offset) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int val; + + /* + * When the Intel ME (management engine) gets reset its serial + * port registers could return 0 momentarily. Functions like + * serial8250_console_write, read and save the IER, perform + * some operation and then restore it. In order to avoid + * setting IER register inadvertently to 0, if the value read + * is 0, double check with ier value in uart_8250_port and use + * that instead. up->ier should be the same value as what is + * currently configured. + */ + val = inb(p->iobase + offset); + if (offset == UART_IER) { + if (val == 0) + val = up->ier; + } + return val; +} + +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_BUG_THRE; + port->port.serial_in = kt_serial_in; + port->port.handle_break = kt_handle_break; + return skip_tx_en_setup(priv, board, port, idx); +} + +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + +static int +pci_xr17c154_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_EXAR_EFR; + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_xr17v35x_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(priv->dev, 0); + if (p == NULL) + return -ENOMEM; + + port->port.flags |= UPF_EXAR_EFR; + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/ + writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/ + writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/ + writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/ + writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/ + writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/ + writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/ + writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/ + writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/ + writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/ + writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/ + writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/ + } + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(128, p + UART_EXAR_TXTRG); + writeb(128, p + UART_EXAR_RXTRG); + iounmap(p); + + return pci_default_setup(priv, board, port, idx); +} + +#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 +#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 +#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a +#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b + +static int +pci_fastcom335_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(priv->dev, 0); + if (p == NULL) + return -ENOMEM; + + port->port.flags |= UPF_EXAR_EFR; + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + switch (priv->dev->device) { + case PCI_DEVICE_ID_COMMTECH_4222PCI335: + case PCI_DEVICE_ID_COMMTECH_4224PCI335: + writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */ + writeb(0x00, p + 0x92); /* MPIOINV[7:0] */ + writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */ + break; + case PCI_DEVICE_ID_COMMTECH_2324PCI335: + case PCI_DEVICE_ID_COMMTECH_2328PCI335: + writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */ + writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */ + writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */ + break; + } + writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */ + writeb(0x00, p + 0x91); /* MPIO3T[7:0] */ + writeb(0x00, p + 0x94); /* MPIOOD[7:0] */ + } + writeb(0x00, p + UART_EXAR_8XMODE); + writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); + writeb(32, p + UART_EXAR_TXTRG); + writeb(32, p + UART_EXAR_RXTRG); + iounmap(p); + + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_wch_ch353_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16550A; + return pci_default_setup(priv, board, port, idx); +} + +static int +pci_wch_ch38x_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + port->port.flags |= UPF_FIXED_TYPE; + port->port.type = PORT_16850; + return pci_default_setup(priv, board, port, idx); +} + +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 +#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 +#define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 +#define PCI_DEVICE_ID_TITAN_200I 0x8028 +#define PCI_DEVICE_ID_TITAN_400I 0x8048 +#define PCI_DEVICE_ID_TITAN_800I 0x8088 +#define PCI_DEVICE_ID_TITAN_800EH 0xA007 +#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 +#define PCI_DEVICE_ID_TITAN_400EH 0xA009 +#define PCI_DEVICE_ID_TITAN_100E 0xA010 +#define PCI_DEVICE_ID_TITAN_200E 0xA012 +#define PCI_DEVICE_ID_TITAN_400E 0xA013 +#define PCI_DEVICE_ID_TITAN_800E 0xA014 +#define PCI_DEVICE_ID_TITAN_200EI 0xA016 +#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_200V3 0xA306 +#define PCI_DEVICE_ID_TITAN_400V3 0xA310 +#define PCI_DEVICE_ID_TITAN_410V3 0xA312 +#define PCI_DEVICE_ID_TITAN_800V3 0xA314 +#define PCI_DEVICE_ID_TITAN_800V3B 0xA315 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 +#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 +#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d +#define PCI_VENDOR_ID_WCH 0x4348 +#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 +#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 +#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 +#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 +#define PCI_VENDOR_ID_AGESTAR 0x5372 +#define PCI_DEVICE_ID_AGESTAR_9375 0x6872 +#define PCI_VENDOR_ID_ASIX 0x9710 +#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 +#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 +#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a +#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e +#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 + +#define PCI_VENDOR_ID_SUNIX 0x1fd4 +#define PCI_DEVICE_ID_SUNIX_1999 0x1999 + +#define PCIE_VENDOR_ID_WCH 0x1c00 +#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 +#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 + +#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 + +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] __refdata = { + /* + * ADDI-DATA GmbH communication cards + */ + { + .vendor = PCI_VENDOR_ID_AMCC, + .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = addidata_apci7800_setup, + }, + /* + * AFAVLAB cards - these may be called via parport_serial + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CE4100_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = ce4100_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = kt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PNW_UART3, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pnw_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_TNG_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = tng_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BSW_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BSW_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = pci_ite887x_exit, + }, + /* + * National Instruments + */ + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = pci_ni8420_exit, + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8430_init, + .setup = pci_ni8430_setup, + .exit = pci_ni8430_exit, + }, + /* Quatech */ + { + .vendor = PCI_VENDOR_ID_QUATECH, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_quatech_init, + .setup = pci_quatech_setup, + .exit = pci_quatech_exit, + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + /* + * Pericom + */ + { + .vendor = 0x12d8, + .device = 0x7952, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup, + }, + { + .vendor = 0x12d8, + .device = 0x7954, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup, + }, + { + .vendor = 0x12d8, + .device = 0x7958, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup, + }, + + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = pci_plx9050_exit, + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = sbs_exit, + }, + /* + * SIIG cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig_init, + .setup = pci_siig_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .probe = pci_timedia_probe, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * SUNIX (Timedia) cards + * Do not "probe" for these cards as there is at least one combination + * card that should be handled by parport_pc that doesn't match the + * rule in pci_timedia_probe. + * It is part number is MIO5079A but its subdevice ID is 0x0102. + * There are some boards with part number SER5037AL that report + * subdevice ID 0x0002. + */ + { + .vendor = PCI_VENDOR_ID_SUNIX, + .device = PCI_DEVICE_ID_SUNIX_1999, + .subvendor = PCI_VENDOR_ID_SUNIX, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + /* + * Exar cards + */ + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C152, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C154, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C158, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17c154_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V352, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V354, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V358, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V8358, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_netmos_9900_setup, + }, + /* + * EndRun Technologies + */ + { + .vendor = PCI_VENDOR_ID_ENDRUN, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_endrun_init, + .setup = pci_default_setup, + }, + /* + * For Oxford Semiconductor Tornado based devices + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_DIGI, + .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, + .subvendor = PCI_SUBVENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_eg20t_init, + .setup = pci_default_setup, + }, + /* + * Cronyx Omega PCI (PLX-chip based) + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_omegapci_setup, + }, + /* WCH CH353 1S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_1S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 2S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 4S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH353 2S1PF card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH352 2S card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH352_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, + /* WCH CH382 2S1P card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, + /* WCH CH384 4S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_4S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, + /* + * ASIX devices with FIFO bug + */ + { + .vendor = PCI_VENDOR_ID_ASIX, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_asix_setup, + }, + /* + * Commtech, Inc. Fastcom adapters + * + */ + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4222PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4224PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_2324PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_2328PCI335, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fastcom335_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4222PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4224PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_COMMTECH, + .device = PCI_DEVICE_ID_COMMTECH_4228PCIE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + { + .vendor = 0x1c29, + .device = 0x1104, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + { + .vendor = 0x1c29, + .device = 0x1108, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + { + .vendor = 0x1c29, + .device = 0x1112, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_fintek_setup, + .init = pci_fintek_init, + }, + + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static inline int get_pci_irq(struct pci_dev *dev, + const struct pciserial_board *board) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud{_offsetinhex} + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * offsetinhex = offset for each sequential port (in hex) + * + * This table is sorted by (in order): bn, bt, baud, offsetindex, n. + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + pbn_b0_8_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + + pbn_b0_2_1152000_200, + pbn_b0_4_1152000_200, + pbn_b0_8_1152000_200, + + pbn_b0_2_1843200, + pbn_b0_4_1843200, + + pbn_b0_2_1843200_200, + pbn_b0_4_1843200_200, + pbn_b0_8_1843200_200, + + pbn_b0_1_4000000, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + pbn_b1_16_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_2_1250000, + + pbn_b1_bt_1_115200, + pbn_b1_bt_2_115200, + pbn_b1_bt_4_115200, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_2_115200, + pbn_b2_4_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_8_1152000, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_2_115200, + pbn_b3_4_115200, + pbn_b3_8_115200, + + pbn_b4_bt_2_921600, + pbn_b4_bt_4_921600, + pbn_b4_bt_8_921600, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_plx_romulus, + pbn_endrun_2_4000000, + pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, + pbn_exar_XR17V352, + pbn_exar_XR17V354, + pbn_exar_XR17V358, + pbn_exar_XR17V8358, + pbn_exar_ibm_saturn, + pbn_pasemi_1682M, + pbn_ni8430_2, + pbn_ni8430_4, + pbn_ni8430_8, + pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, + pbn_ce4100_1_115200, + pbn_byt, + pbn_pnw, + pbn_tng, + pbn_qrk, + pbn_omegapci, + pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, + pbn_fintek_4, + pbn_fintek_8, + pbn_fintek_12, + pbn_wch384_4, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pciserial_board pci_boards[] = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_8_115200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b0_2_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + + [pbn_b0_4_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + + [pbn_b0_8_1152000_200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 0x200, + }, + + [pbn_b0_2_1843200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 8, + }, + [pbn_b0_4_1843200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_4_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_8_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_16_115200] = { + .flags = FL_BASE1, + .num_ports = 16, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_1250000] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_4_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_4_115200] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_2_115200] = { + .flags = FL_BASE3, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b4_bt_2_921600] = { + .flags = FL_BASE4, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_4_921600] = { + .flags = FL_BASE4, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_8_921600] = { + .flags = FL_BASE4, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * EndRun Technologies + * Uses the size of PCI Base region 0 to + * signal now many ports are available + * 2 port 952 Uart support + */ + [pbn_endrun_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17V352] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V354] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V358] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V8358] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, + /* + * National Instruments 843x + */ + [pbn_ni8430_16] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + /* + * ADDI-DATA GmbH PCI-Express communication cards + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ce4100_1_115200] = { + .flags = FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .reg_shift = 2, + }, + /* + * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on, + * but is overridden by byt_set_termios. + */ + [pbn_byt] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 2764800, + .uart_offset = 0x80, + .reg_shift = 2, + }, + [pbn_pnw] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + }, + [pbn_tng] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 1843200, + }, + [pbn_qrk] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 2764800, + .reg_shift = 2, + }, + [pbn_omegapci] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 0x200, + }, + [pbn_NETMOS9900_2s_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, + [pbn_fintek_4] = { + .num_ports = 4, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + [pbn_fintek_8] = { + .num_ports = 8, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + [pbn_fintek_12] = { + .num_ports = 12, + .uart_offset = 8, + .base_baud = 115200, + .first_offset = 0x40, + }, + + [pbn_wch384_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, +}; + +static const struct pci_device_id blacklist[] = { + /* softmodems */ + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ + + /* multi-io cards handled by parport_serial */ + { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ + { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ + { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ + { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + const struct pci_device_id *bldev; + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + /* + * Do not access blacklisted devices that are known not to + * feature serial ports or are handled by other modules. + */ + for (bldev = blacklist; + bldev < blacklist + ARRAY_SIZE(blacklist); + bldev++) { + if (dev->vendor == bldev->vendor && + dev->device == bldev->device) + return -ENODEV; + } + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) +{ + struct uart_8250_port uart; + struct serial_private *priv; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } + if (rc) + nr_ports = rc; + } + + priv = kzalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + priv = ERR_PTR(-ENOMEM); + goto err_deinit; + } + + priv->dev = dev; + priv->quirk = quirk; + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.uartclk = board->base_baud * 16; + uart.port.irq = get_pci_irq(dev, board); + uart.port.dev = &dev->dev; + + for (i = 0; i < nr_ports; i++) { + if (quirk->setup(priv, board, &uart, i)) + break; + + dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", + uart.port.iobase, uart.port.irq, uart.port.iotype); + + priv->line[i] = serial8250_register_8250_port(&uart); + if (priv->line[i] < 0) { + dev_err(&dev->dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, + uart.port.iotype, priv->line[i]); + break; + } + } + priv->nr = i; + return priv; + +err_deinit: + if (quirk->exit) + quirk->exit(dev); +err_out: + return priv; +} +EXPORT_SYMBOL_GPL(pciserial_init_ports); + +void pciserial_remove_ports(struct serial_private *priv) +{ + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(priv->dev); + if (quirk->exit) + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); + + /* + * Ensure that every init quirk is properly torn down + */ + if (priv->quirk->exit) + priv->quirk->exit(priv->dev); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct pci_serial_quirk *quirk; + struct serial_private *priv; + const struct pciserial_board *board; + struct pciserial_board tmp; + int rc; + + quirk = find_quirk(dev); + if (quirk->probe) { + rc = quirk->probe(dev); + if (rc) + return rc; + } + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + dev_err(&dev->dev, "invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + pci_save_state(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, &tmp); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + + disable: + pci_disable_device(dev); + return rc; +} + +static void pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int pciserial_suspend_one(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct serial_private *priv = pci_get_drvdata(pdev); + + if (priv) + pciserial_suspend_ports(priv); + + return 0; +} + +static int pciserial_resume_one(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct serial_private *priv = pci_get_drvdata(pdev); + int err; + + if (priv) { + /* + * The device may have been disabled. Re-enable it. + */ + err = pci_enable_device(pdev); + /* FIXME: We cannot simply error out here */ + if (err) + dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); + pciserial_resume_ports(priv); + } + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, + pciserial_resume_one); + +static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, + /* Advantech also use 0x3618 and 0xf618 */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, + pbn_b1_2_1250000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, + pbn_b0_2_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, + pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b2_4_115200 }, + /* Unknown card - subdevice 0x1588 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, + PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_b2_4_115200 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + /* + * EndRun Technologies. PCI express device range. + * EndRun PTP/1588 has 2 Native UARTs. + */ + { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_endrun_2_4000000 }, + /* + * Quatech cards. These actually have configurable clocks but for + * now we just use the default. + * + * 100 series are RS232, 200 series RS422, + */ + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, + 0, 0, pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, + 0, 0, pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, + + /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + + /* + * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, + PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * SUNIX (TIMEDIA) + */ + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, + pbn_b0_bt_1_921600 }, + + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_2_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + /* + * Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V352 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V354 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V358 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V8358 }, + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, + + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, + /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + + /* + * Mainpine series cards: Fairly standard layout but fools + * parts of the autodetect in some cases and uses otherwise + * unmatched communications subclasses in the PCI Express case + */ + + { /* RockForceDUO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0300, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0400, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0600, + 0, 0, pbn_b0_2_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0700, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0800, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0C00, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUARTRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0D00, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x1D00, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceD1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2000, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceF1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2100, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceD2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceF2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2300, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceD4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2400, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceF4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceD8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2600, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceF8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2700, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express D1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3000, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express F1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3100, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express D2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3200, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express F2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3300, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express D4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3400, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express F4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3500, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express D8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3C00, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express F8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3D00, + 0, 0, pbn_b0_8_115200 }, + + + /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* + * National Instruments + */ + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + + /* + * ADDI-DATA GmbH communication cards + */ + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_AMCC, + PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b1_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7800_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + PCI_VENDOR_ID_IBM, 0x0299, + 0, 0, pbn_b0_bt_2_115200 }, + + /* + * other NetMos 9835 devices are most likely handled by the + * parport_serial driver, check drivers/parport/parport_serial.c + * before adding them here. + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + /* the 9901 is a rebranded 9912 */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x3002, + 0, 0, pbn_NETMOS9900_2s_115200 }, + + /* + * Best Connectivity and Rosewill PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* Intel CE4100 */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ce4100_1_115200 }, + /* Intel BayTrail */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART1, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART2, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + + /* + * Intel Penwell + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pnw}, + + /* + * Intel Tangier + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_tng}, + + /* + * Intel Quark x1000 + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_qrk }, + /* + * Cronyx Omega PCI + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_omegapci }, + + /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + + /* + * AgeStar as-prs2-009 + */ + { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + /* + * WCH CH353 series devices: The 2S1P is handled by parport_serial + * so not listed here. + */ + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_4_115200 }, + + { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch384_4 }, + + /* + * Commtech, Inc. Fastcom adapters + */ + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_2_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_4_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_4_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_b0_8_1152000_200 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V352 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V354 }, + { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V358 }, + + /* Fintek PCI serial cards */ + { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, + { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, + { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, + pci_channel_state_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (priv) + pciserial_suspend_ports(priv); + + pci_disable_device(dev); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) +{ + int rc; + + rc = pci_enable_device(dev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_restore_state(dev); + pci_save_state(dev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void serial8250_io_resume(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_resume_ports(priv); +} + +static const struct pci_error_handlers serial8250_err_handler = { + .error_detected = serial8250_io_error_detected, + .slot_reset = serial8250_io_slot_reset, + .resume = serial8250_io_resume, +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = pciserial_remove_one, + .driver = { + .pm = &pciserial_pm_ops, + }, + .id_table = serial_pci_tbl, + .err_handler = &serial8250_err_handler, +}; + +module_pci_driver(serial_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/kernel/drivers/tty/serial/8250/8250_pnp.c b/kernel/drivers/tty/serial/8250/8250_pnp.c new file mode 100644 index 000000000..50a09cd76 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/8250_pnp.c @@ -0,0 +1,534 @@ +/* + * Probe for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 +#define CIR_PORT 0x0800 + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Davicom ISA 33.6K Modem */ + { "DAV0336", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 336i PnP Voice Modem */ + { "SUP1381", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Wacom tablets */ + { "WACFXXX", 0 }, + /* Compaq touchscreen */ + { "FPI2002", 0 }, + /* Fujitsu Stylistic touchscreens */ + { "FUJ02B2", 0 }, + { "FUJ02B3", 0 }, + /* Fujitsu Stylistic LT touchscreens */ + { "FUJ02B4", 0 }, + /* Passive Fujitsu Stylistic touchscreens */ + { "FUJ02B6", 0 }, + { "FUJ02B7", 0 }, + { "FUJ02B8", 0 }, + { "FUJ02B9", 0 }, + { "FUJ02BC", 0 }, + /* Fujitsu Wacom Tablet PC device */ + { "FUJ02E5", 0 }, + /* Fujitsu P-series tablet PC device */ + { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, + /* + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in + * disguise) + */ + { "LTS0001", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unknown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + /* Winbond CIR port, should not be probed. We should keep track + of it to prevent the legacy serial driver from probing it */ + { "WEC1022", CIR_PORT }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static char *modem_names[] = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static int check_name(char *name) +{ + char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return 1; + + return 0; +} + +static int check_resources(struct pnp_dev *dev) +{ + resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return 1; + } + + return 0; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int serial_pnp_guess_board(struct pnp_dev *dev) +{ + if (!(check_name(pnp_dev_name(dev)) || + (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev)) + return 0; + + return -ENODEV; +} + +static int +serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + struct uart_8250_port uart, *port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev); + if (ret < 0) + return ret; + } + + memset(&uart, 0, sizeof(uart)); + if (pnp_irq_valid(dev, 0)) + uart.port.irq = pnp_irq(dev, 0); + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { + uart.port.iobase = pnp_port_start(dev, 2); + uart.port.iotype = UPIO_PORT; + } else if (pnp_port_valid(dev, 0)) { + uart.port.iobase = pnp_port_start(dev, 0); + uart.port.iotype = UPIO_PORT; + } else if (pnp_mem_valid(dev, 0)) { + uart.port.mapbase = pnp_mem_start(dev, 0); + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_IOREMAP; + } else + return -ENODEV; + +#ifdef SERIAL_DEBUG_PNP + printk(KERN_DEBUG + "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", + uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype); +#endif + if (flags & CIR_PORT) { + uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.port.type = PORT_8250_CIR; + } + + uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + uart.port.flags |= UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &dev->dev; + + line = serial8250_register_8250_port(&uart); + if (line < 0 || (flags & CIR_PORT)) + return -ENODEV; + + port = serial8250_get_port(line); + if (uart_console(&port->port)) + dev->capabilities |= PNP_CONSOLE; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void serial_pnp_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + dev->capabilities &= ~PNP_CONSOLE; + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int serial_pnp_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define serial_pnp_suspend NULL +#define serial_pnp_resume NULL +#endif /* CONFIG_PM */ + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .probe = serial_pnp_probe, + .remove = serial_pnp_remove, + .suspend = serial_pnp_suspend, + .resume = serial_pnp_resume, + .id_table = pnp_dev_table, +}; + +int serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +void serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + diff --git a/kernel/drivers/tty/serial/8250/Kconfig b/kernel/drivers/tty/serial/8250/Kconfig new file mode 100644 index 000000000..c35070356 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/Kconfig @@ -0,0 +1,344 @@ +# +# The 8250/16550 serial drivers. You shouldn't be in this list unless +# you somehow have an implicit or explicit dependency on SERIAL_8250. +# + +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades multi serial port driver + does not need this driver built in for it to work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_DEPRECATED_OPTIONS + bool "Support 8250_core.* kernel options (DEPRECATED)" + depends on SERIAL_8250 + default y + ---help--- + In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to + accept kernel parameters in both forms like 8250_core.nr_uarts=4 and + 8250.nr_uarts=4. We now renamed the module back to 8250, but if + anybody noticed in 3.7 and changed their userspace we still have to + keep the 8250_core.* options around until they revert the changes + they already did. + + If 8250 is built as a module, this adds 8250_core alias instead. + + If you did not notice yet and/or you have userspace from pre-3.7, it + is safe (and recommended) to say N here. + +config SERIAL_8250_PNP + bool "8250/16550 PNP device support" if EXPERT + depends on SERIAL_8250 && PNP + default y + ---help--- + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_DMA + bool "DMA support for 16550 compatible UART controllers" if EXPERT + depends on SERIAL_8250 && DMADEVICES=y + default SERIAL_8250 + help + This builds DMA support that can be used with 8250/16650 + compatible UART controllers that support DMA signaling. + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EXPERT + depends on SERIAL_8250 && PCI + default SERIAL_8250 + select RATIONAL + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + Note that serial ports on NetMos 9835 Multi-I/O cards are handled + by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +# +# Misc. options/drivers. +# + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + +config SERIAL_8250_DW + tristate "Support for Synopsys DesignWare 8250 quirks" + depends on SERIAL_8250 + help + Selecting this option will enable handling of the extra features + present in the Synopsys DesignWare APB UART. + +config SERIAL_8250_EM + tristate "Support for Emma Mobile integrated serial port" + depends on SERIAL_8250 && ARM && HAVE_CLK + help + Selecting this option will add support for the integrated serial + port hardware found on the Emma Mobile line of processors. + If unsure, say N. + +config SERIAL_8250_RT288X + bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" + depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620) + help + If you have a Ralink RT288x/RT305x SoC based board and want to use the + serial port, say Y to this option. The driver can handle up to 2 serial + ports. If unsure, say N. + +config SERIAL_8250_OMAP + tristate "Support for OMAP internal UART (8250 based driver)" + depends on SERIAL_8250 && ARCH_OMAP2PLUS + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + This driver uses ttyS instead of ttyO. + +config SERIAL_8250_OMAP_TTYO_FIXUP + bool "Replace ttyO with ttyS" + depends on SERIAL_8250_OMAP=y && SERIAL_8250_CONSOLE + default y + help + This option replaces the "console=ttyO" argument with the matching + ttyS argument if the user did not specified it on the command line. + This ensures that the user can see the kernel output during boot + which he wouldn't see otherwise. The getty has still to be configured + for ttyS instead of ttyO regardless of this option. + This option is intended for people who "automatically" enable this + driver without knowing that this driver requires a different console= + argument. If you read this, please keep this option disabled and + instead update your kernel command line. If you prepare a kernel for a + distribution or other kind of larger user base then you probably want + to keep this option enabled. Otherwise people might complain about a + not booting kernel because the serial console remains silent in case + they forgot to update the command line. + +config SERIAL_8250_FINTEK + tristate "Support for Fintek F81216A LPC to 4 UART" + depends on SERIAL_8250 && PNP + help + Selecting this option will add support for the Fintek F81216A + LPC to 4 UART. This device has some RS485 functionality not available + through the PNP driver. If unsure, say N. + +config SERIAL_8250_MT6577 + bool "Mediatek serial port support" + depends on SERIAL_8250 && ARCH_MEDIATEK + help + If you have a Mediatek based board and want to use the + serial port, say Y to this option. If unsure, say N. diff --git a/kernel/drivers/tty/serial/8250/Makefile b/kernel/drivers/tty/serial/8250/Makefile new file mode 100644 index 000000000..31e7cdc68 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/Makefile @@ -0,0 +1,25 @@ +# +# Makefile for the 8250 serial device drivers. +# + +obj-$(CONFIG_SERIAL_8250) += 8250.o +8250-y := 8250_core.o +8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o +obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o +obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o +obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o diff --git a/kernel/drivers/tty/serial/8250/serial_cs.c b/kernel/drivers/tty/serial/8250/serial_cs.c new file mode 100644 index 000000000..4d180c942 --- /dev/null +++ b/kernel/drivers/tty/serial/8250/serial_cs.c @@ -0,0 +1,856 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_8250_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) +{ + uart->port.uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device * link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + return serial_config(link); +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, + unsigned int iobase, int irq) +{ + struct uart_8250_port uart; + int line; + + memset(&uart, 0, sizeof(uart)); + uart.port.iobase = iobase; + uart.port.irq = irq; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &handle->dev; + if (buggy_uart) + uart.port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &uart); + + line = serial8250_register_8250_port(&uart); + if (line < 0) { + pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", + (unsigned long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i = -ENODEV, try; + + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; + + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return -1; + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -1; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || + p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, "no usable port range " + "found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + int err; + + if (link->config_index == 1 || + link->config_index == 3) { + err = setup_serial(link, info, base2, + link->irq); + base2 = link->resource[0]->start; + } else { + err = setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device * link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) + pcmcia_loop_config(link, serial_check_for_multi, info); + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static const struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; +module_pcmcia_driver(serial_cs_driver); + +MODULE_LICENSE("GPL"); -- cgit 1.2.3-korg