From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- .../drivers/staging/iio/Documentation/dac/max517 | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 kernel/drivers/staging/iio/Documentation/dac/max517 (limited to 'kernel/drivers/staging/iio/Documentation/dac/max517') diff --git a/kernel/drivers/staging/iio/Documentation/dac/max517 b/kernel/drivers/staging/iio/Documentation/dac/max517 new file mode 100644 index 000000000..e60ec2f91 --- /dev/null +++ b/kernel/drivers/staging/iio/Documentation/dac/max517 @@ -0,0 +1,41 @@ +Kernel driver max517 +==================== + +Supported chips: + * Maxim MAX517, MAX518, MAX519 + Prefix: 'max517' + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/ + +Author: + Roland Stigge + +Description +----------- + +The Maxim MAX517/518/519 is an 8-bit DAC on the I2C bus. The following table +shows the different feature sets of the variants MAX517, MAX518 and MAX519: + +Feature MAX517 MAX518 MAX519 +-------------------------------------------------------------------------- +One output channel X +Two output channels X X +Simultaneous output updates X X +Supply voltage as reference X +Separate reference input X +Reference input for each DAC X + +Via the iio sysfs interface, there are three attributes available: out1_raw, +out2_raw and out12_raw. With out1_raw and out2_raw, the current output values +(0..255) of the DACs can be written to the device. out12_raw can be used to set +both output channel values simultaneously. + +With MAX517, only out1_raw is available. + +Via out1_scale (and where appropriate, out2_scale), the current scaling factor +in mV can be read. + +When the operating system goes to a power down state, the Power Down function +of the chip is activated, reducing the supply current to 4uA. + +On power-up, the device is in 0V-output state. -- cgit 1.2.3-korg