From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/scsi/device_handler/Kconfig | 40 + kernel/drivers/scsi/device_handler/Makefile | 8 + kernel/drivers/scsi/device_handler/scsi_dh.c | 621 ++++++++++++++ kernel/drivers/scsi/device_handler/scsi_dh_alua.c | 905 ++++++++++++++++++++ kernel/drivers/scsi/device_handler/scsi_dh_emc.c | 725 ++++++++++++++++ kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.c | 400 +++++++++ kernel/drivers/scsi/device_handler/scsi_dh_rdac.c | 937 +++++++++++++++++++++ 7 files changed, 3636 insertions(+) create mode 100644 kernel/drivers/scsi/device_handler/Kconfig create mode 100644 kernel/drivers/scsi/device_handler/Makefile create mode 100644 kernel/drivers/scsi/device_handler/scsi_dh.c create mode 100644 kernel/drivers/scsi/device_handler/scsi_dh_alua.c create mode 100644 kernel/drivers/scsi/device_handler/scsi_dh_emc.c create mode 100644 kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.c create mode 100644 kernel/drivers/scsi/device_handler/scsi_dh_rdac.c (limited to 'kernel/drivers/scsi/device_handler') diff --git a/kernel/drivers/scsi/device_handler/Kconfig b/kernel/drivers/scsi/device_handler/Kconfig new file mode 100644 index 000000000..69abd0ad4 --- /dev/null +++ b/kernel/drivers/scsi/device_handler/Kconfig @@ -0,0 +1,40 @@ +# +# SCSI Device Handler configuration +# + +menuconfig SCSI_DH + tristate "SCSI Device Handlers" + depends on SCSI + default n + help + SCSI Device Handlers provide device specific support for + devices utilized in multipath configurations. Say Y here to + select support for specific hardware. + +config SCSI_DH_RDAC + tristate "LSI RDAC Device Handler" + depends on SCSI_DH + help + If you have a LSI RDAC select y. Otherwise, say N. + +config SCSI_DH_HP_SW + tristate "HP/COMPAQ MSA Device Handler" + depends on SCSI_DH + help + If you have a HP/COMPAQ MSA device that requires START_STOP to + be sent to start it and cannot upgrade the firmware then select y. + Otherwise, say N. + +config SCSI_DH_EMC + tristate "EMC CLARiiON Device Handler" + depends on SCSI_DH + help + If you have a EMC CLARiiON select y. Otherwise, say N. + +config SCSI_DH_ALUA + tristate "SPC-3 ALUA Device Handler" + depends on SCSI_DH + help + SCSI Device handler for generic SPC-3 Asymmetric Logical Unit + Access (ALUA). + diff --git a/kernel/drivers/scsi/device_handler/Makefile b/kernel/drivers/scsi/device_handler/Makefile new file mode 100644 index 000000000..e1d2ea083 --- /dev/null +++ b/kernel/drivers/scsi/device_handler/Makefile @@ -0,0 +1,8 @@ +# +# SCSI Device Handler +# +obj-$(CONFIG_SCSI_DH) += scsi_dh.o +obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o +obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o +obj-$(CONFIG_SCSI_DH_EMC) += scsi_dh_emc.o +obj-$(CONFIG_SCSI_DH_ALUA) += scsi_dh_alua.o diff --git a/kernel/drivers/scsi/device_handler/scsi_dh.c b/kernel/drivers/scsi/device_handler/scsi_dh.c new file mode 100644 index 000000000..1efebc9ee --- /dev/null +++ b/kernel/drivers/scsi/device_handler/scsi_dh.c @@ -0,0 +1,621 @@ +/* + * SCSI device handler infrastruture. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2007 + * Authors: + * Chandra Seetharaman + * Mike Anderson + */ + +#include +#include +#include +#include "../scsi_priv.h" + +static DEFINE_SPINLOCK(list_lock); +static LIST_HEAD(scsi_dh_list); + +static struct scsi_device_handler *get_device_handler(const char *name) +{ + struct scsi_device_handler *tmp, *found = NULL; + + spin_lock(&list_lock); + list_for_each_entry(tmp, &scsi_dh_list, list) { + if (!strncmp(tmp->name, name, strlen(tmp->name))) { + found = tmp; + break; + } + } + spin_unlock(&list_lock); + return found; +} + +/* + * device_handler_match_function - Match a device handler to a device + * @sdev - SCSI device to be tested + * + * Tests @sdev against the match function of all registered device_handler. + * Returns the found device handler or NULL if not found. + */ +static struct scsi_device_handler * +device_handler_match_function(struct scsi_device *sdev) +{ + struct scsi_device_handler *tmp_dh, *found_dh = NULL; + + spin_lock(&list_lock); + list_for_each_entry(tmp_dh, &scsi_dh_list, list) { + if (tmp_dh->match && tmp_dh->match(sdev)) { + found_dh = tmp_dh; + break; + } + } + spin_unlock(&list_lock); + return found_dh; +} + +/* + * device_handler_match - Attach a device handler to a device + * @scsi_dh - The device handler to match against or NULL + * @sdev - SCSI device to be tested against @scsi_dh + * + * Tests @sdev against the device handler @scsi_dh or against + * all registered device_handler if @scsi_dh == NULL. + * Returns the found device handler or NULL if not found. + */ +static struct scsi_device_handler * +device_handler_match(struct scsi_device_handler *scsi_dh, + struct scsi_device *sdev) +{ + struct scsi_device_handler *found_dh; + + found_dh = device_handler_match_function(sdev); + + if (scsi_dh && found_dh != scsi_dh) + found_dh = NULL; + + return found_dh; +} + +/* + * scsi_dh_handler_attach - Attach a device handler to a device + * @sdev - SCSI device the device handler should attach to + * @scsi_dh - The device handler to attach + */ +static int scsi_dh_handler_attach(struct scsi_device *sdev, + struct scsi_device_handler *scsi_dh) +{ + struct scsi_dh_data *d; + + if (sdev->scsi_dh_data) { + if (sdev->scsi_dh_data->scsi_dh != scsi_dh) + return -EBUSY; + + kref_get(&sdev->scsi_dh_data->kref); + return 0; + } + + if (!try_module_get(scsi_dh->module)) + return -EINVAL; + + d = scsi_dh->attach(sdev); + if (IS_ERR(d)) { + sdev_printk(KERN_ERR, sdev, "%s: Attach failed (%ld)\n", + scsi_dh->name, PTR_ERR(d)); + module_put(scsi_dh->module); + return PTR_ERR(d); + } + + d->scsi_dh = scsi_dh; + kref_init(&d->kref); + d->sdev = sdev; + + spin_lock_irq(sdev->request_queue->queue_lock); + sdev->scsi_dh_data = d; + spin_unlock_irq(sdev->request_queue->queue_lock); + return 0; +} + +static void __detach_handler (struct kref *kref) +{ + struct scsi_dh_data *scsi_dh_data = + container_of(kref, struct scsi_dh_data, kref); + struct scsi_device_handler *scsi_dh = scsi_dh_data->scsi_dh; + struct scsi_device *sdev = scsi_dh_data->sdev; + + scsi_dh->detach(sdev); + + spin_lock_irq(sdev->request_queue->queue_lock); + sdev->scsi_dh_data = NULL; + spin_unlock_irq(sdev->request_queue->queue_lock); + + sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", scsi_dh->name); + module_put(scsi_dh->module); +} + +/* + * scsi_dh_handler_detach - Detach a device handler from a device + * @sdev - SCSI device the device handler should be detached from + * @scsi_dh - Device handler to be detached + * + * Detach from a device handler. If a device handler is specified, + * only detach if the currently attached handler matches @scsi_dh. + */ +static void scsi_dh_handler_detach(struct scsi_device *sdev, + struct scsi_device_handler *scsi_dh) +{ + if (!sdev->scsi_dh_data) + return; + + if (scsi_dh && scsi_dh != sdev->scsi_dh_data->scsi_dh) + return; + + if (!scsi_dh) + scsi_dh = sdev->scsi_dh_data->scsi_dh; + + if (scsi_dh) + kref_put(&sdev->scsi_dh_data->kref, __detach_handler); +} + +/* + * Functions for sysfs attribute 'dh_state' + */ +static ssize_t +store_dh_state(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device_handler *scsi_dh; + int err = -EINVAL; + + if (sdev->sdev_state == SDEV_CANCEL || + sdev->sdev_state == SDEV_DEL) + return -ENODEV; + + if (!sdev->scsi_dh_data) { + /* + * Attach to a device handler + */ + if (!(scsi_dh = get_device_handler(buf))) + return err; + err = scsi_dh_handler_attach(sdev, scsi_dh); + } else { + scsi_dh = sdev->scsi_dh_data->scsi_dh; + if (!strncmp(buf, "detach", 6)) { + /* + * Detach from a device handler + */ + scsi_dh_handler_detach(sdev, scsi_dh); + err = 0; + } else if (!strncmp(buf, "activate", 8)) { + /* + * Activate a device handler + */ + if (scsi_dh->activate) + err = scsi_dh->activate(sdev, NULL, NULL); + else + err = 0; + } + } + + return err<0?err:count; +} + +static ssize_t +show_dh_state(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + if (!sdev->scsi_dh_data) + return snprintf(buf, 20, "detached\n"); + + return snprintf(buf, 20, "%s\n", sdev->scsi_dh_data->scsi_dh->name); +} + +static struct device_attribute scsi_dh_state_attr = + __ATTR(dh_state, S_IRUGO | S_IWUSR, show_dh_state, + store_dh_state); + +/* + * scsi_dh_sysfs_attr_add - Callback for scsi_init_dh + */ +static int scsi_dh_sysfs_attr_add(struct device *dev, void *data) +{ + struct scsi_device *sdev; + int err; + + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + + err = device_create_file(&sdev->sdev_gendev, + &scsi_dh_state_attr); + + return 0; +} + +/* + * scsi_dh_sysfs_attr_remove - Callback for scsi_exit_dh + */ +static int scsi_dh_sysfs_attr_remove(struct device *dev, void *data) +{ + struct scsi_device *sdev; + + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + + device_remove_file(&sdev->sdev_gendev, + &scsi_dh_state_attr); + + return 0; +} + +/* + * scsi_dh_notifier - notifier chain callback + */ +static int scsi_dh_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct scsi_device *sdev; + int err = 0; + struct scsi_device_handler *devinfo = NULL; + + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + + if (action == BUS_NOTIFY_ADD_DEVICE) { + err = device_create_file(dev, &scsi_dh_state_attr); + /* don't care about err */ + devinfo = device_handler_match(NULL, sdev); + if (devinfo) + err = scsi_dh_handler_attach(sdev, devinfo); + } else if (action == BUS_NOTIFY_DEL_DEVICE) { + device_remove_file(dev, &scsi_dh_state_attr); + scsi_dh_handler_detach(sdev, NULL); + } + return err; +} + +/* + * scsi_dh_notifier_add - Callback for scsi_register_device_handler + */ +static int scsi_dh_notifier_add(struct device *dev, void *data) +{ + struct scsi_device_handler *scsi_dh = data; + struct scsi_device *sdev; + + if (!scsi_is_sdev_device(dev)) + return 0; + + if (!get_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + + if (device_handler_match(scsi_dh, sdev)) + scsi_dh_handler_attach(sdev, scsi_dh); + + put_device(dev); + + return 0; +} + +/* + * scsi_dh_notifier_remove - Callback for scsi_unregister_device_handler + */ +static int scsi_dh_notifier_remove(struct device *dev, void *data) +{ + struct scsi_device_handler *scsi_dh = data; + struct scsi_device *sdev; + + if (!scsi_is_sdev_device(dev)) + return 0; + + if (!get_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + + scsi_dh_handler_detach(sdev, scsi_dh); + + put_device(dev); + + return 0; +} + +/* + * scsi_register_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be registered. + * + * Returns 0 on success, -EBUSY if handler already registered. + */ +int scsi_register_device_handler(struct scsi_device_handler *scsi_dh) +{ + + if (get_device_handler(scsi_dh->name)) + return -EBUSY; + + if (!scsi_dh->attach || !scsi_dh->detach) + return -EINVAL; + + spin_lock(&list_lock); + list_add(&scsi_dh->list, &scsi_dh_list); + spin_unlock(&list_lock); + + bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add); + printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name); + + return SCSI_DH_OK; +} +EXPORT_SYMBOL_GPL(scsi_register_device_handler); + +/* + * scsi_unregister_device_handler - register a device handler personality + * module. + * @scsi_dh - device handler to be unregistered. + * + * Returns 0 on success, -ENODEV if handler not registered. + */ +int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh) +{ + + if (!get_device_handler(scsi_dh->name)) + return -ENODEV; + + bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, + scsi_dh_notifier_remove); + + spin_lock(&list_lock); + list_del(&scsi_dh->list); + spin_unlock(&list_lock); + printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name); + + return SCSI_DH_OK; +} +EXPORT_SYMBOL_GPL(scsi_unregister_device_handler); + +/* + * scsi_dh_activate - activate the path associated with the scsi_device + * corresponding to the given request queue. + * Returns immediately without waiting for activation to be completed. + * @q - Request queue that is associated with the scsi_device to be + * activated. + * @fn - Function to be called upon completion of the activation. + * Function fn is called with data (below) and the error code. + * Function fn may be called from the same calling context. So, + * do not hold the lock in the caller which may be needed in fn. + * @data - data passed to the function fn upon completion. + * + */ +int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) +{ + int err = 0; + unsigned long flags; + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh = NULL; + struct device *dev = NULL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (!sdev) { + spin_unlock_irqrestore(q->queue_lock, flags); + err = SCSI_DH_NOSYS; + if (fn) + fn(data, err); + return err; + } + + if (sdev->scsi_dh_data) + scsi_dh = sdev->scsi_dh_data->scsi_dh; + dev = get_device(&sdev->sdev_gendev); + if (!scsi_dh || !dev || + sdev->sdev_state == SDEV_CANCEL || + sdev->sdev_state == SDEV_DEL) + err = SCSI_DH_NOSYS; + if (sdev->sdev_state == SDEV_OFFLINE) + err = SCSI_DH_DEV_OFFLINED; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (err) { + if (fn) + fn(data, err); + goto out; + } + + if (scsi_dh->activate) + err = scsi_dh->activate(sdev, fn, data); +out: + put_device(dev); + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_activate); + +/* + * scsi_dh_set_params - set the parameters for the device as per the + * string specified in params. + * @q - Request queue that is associated with the scsi_device for + * which the parameters to be set. + * @params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * for example, string for 2 parameters with value 10 and 21 + * is specified as "2\010\021\0". + */ +int scsi_dh_set_params(struct request_queue *q, const char *params) +{ + int err = -SCSI_DH_NOSYS; + unsigned long flags; + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh = NULL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (sdev && sdev->scsi_dh_data) + scsi_dh = sdev->scsi_dh_data->scsi_dh; + if (scsi_dh && scsi_dh->set_params && get_device(&sdev->sdev_gendev)) + err = 0; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (err) + return err; + err = scsi_dh->set_params(sdev, params); + put_device(&sdev->sdev_gendev); + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_set_params); + +/* + * scsi_dh_handler_exist - Return TRUE(1) if a device handler exists for + * the given name. FALSE(0) otherwise. + * @name - name of the device handler. + */ +int scsi_dh_handler_exist(const char *name) +{ + return (get_device_handler(name) != NULL); +} +EXPORT_SYMBOL_GPL(scsi_dh_handler_exist); + +/* + * scsi_dh_attach - Attach device handler + * @q - Request queue that is associated with the scsi_device + * the handler should be attached to + * @name - name of the handler to attach + */ +int scsi_dh_attach(struct request_queue *q, const char *name) +{ + unsigned long flags; + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh; + int err = 0; + + scsi_dh = get_device_handler(name); + if (!scsi_dh) + return -EINVAL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (!sdev || !get_device(&sdev->sdev_gendev)) + err = -ENODEV; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (!err) { + err = scsi_dh_handler_attach(sdev, scsi_dh); + put_device(&sdev->sdev_gendev); + } + return err; +} +EXPORT_SYMBOL_GPL(scsi_dh_attach); + +/* + * scsi_dh_detach - Detach device handler + * @q - Request queue that is associated with the scsi_device + * the handler should be detached from + * + * This function will detach the device handler only + * if the sdev is not part of the internal list, ie + * if it has been attached manually. + */ +void scsi_dh_detach(struct request_queue *q) +{ + unsigned long flags; + struct scsi_device *sdev; + struct scsi_device_handler *scsi_dh = NULL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (!sdev || !get_device(&sdev->sdev_gendev)) + sdev = NULL; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (!sdev) + return; + + if (sdev->scsi_dh_data) { + scsi_dh = sdev->scsi_dh_data->scsi_dh; + scsi_dh_handler_detach(sdev, scsi_dh); + } + put_device(&sdev->sdev_gendev); +} +EXPORT_SYMBOL_GPL(scsi_dh_detach); + +/* + * scsi_dh_attached_handler_name - Get attached device handler's name + * @q - Request queue that is associated with the scsi_device + * that may have a device handler attached + * @gfp - the GFP mask used in the kmalloc() call when allocating memory + * + * Returns name of attached handler, NULL if no handler is attached. + * Caller must take care to free the returned string. + */ +const char *scsi_dh_attached_handler_name(struct request_queue *q, gfp_t gfp) +{ + unsigned long flags; + struct scsi_device *sdev; + const char *handler_name = NULL; + + spin_lock_irqsave(q->queue_lock, flags); + sdev = q->queuedata; + if (!sdev || !get_device(&sdev->sdev_gendev)) + sdev = NULL; + spin_unlock_irqrestore(q->queue_lock, flags); + + if (!sdev) + return NULL; + + if (sdev->scsi_dh_data) + handler_name = kstrdup(sdev->scsi_dh_data->scsi_dh->name, gfp); + + put_device(&sdev->sdev_gendev); + return handler_name; +} +EXPORT_SYMBOL_GPL(scsi_dh_attached_handler_name); + +static struct notifier_block scsi_dh_nb = { + .notifier_call = scsi_dh_notifier +}; + +static int __init scsi_dh_init(void) +{ + int r; + + r = bus_register_notifier(&scsi_bus_type, &scsi_dh_nb); + + if (!r) + bus_for_each_dev(&scsi_bus_type, NULL, NULL, + scsi_dh_sysfs_attr_add); + + return r; +} + +static void __exit scsi_dh_exit(void) +{ + bus_for_each_dev(&scsi_bus_type, NULL, NULL, + scsi_dh_sysfs_attr_remove); + bus_unregister_notifier(&scsi_bus_type, &scsi_dh_nb); +} + +module_init(scsi_dh_init); +module_exit(scsi_dh_exit); + +MODULE_DESCRIPTION("SCSI device handler"); +MODULE_AUTHOR("Chandra Seetharaman "); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/scsi/device_handler/scsi_dh_alua.c b/kernel/drivers/scsi/device_handler/scsi_dh_alua.c new file mode 100644 index 000000000..854b568b9 --- /dev/null +++ b/kernel/drivers/scsi/device_handler/scsi_dh_alua.c @@ -0,0 +1,905 @@ +/* + * Generic SCSI-3 ALUA SCSI Device Handler + * + * Copyright (C) 2007-2010 Hannes Reinecke, SUSE Linux Products GmbH. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ +#include +#include +#include +#include +#include +#include + +#define ALUA_DH_NAME "alua" +#define ALUA_DH_VER "1.3" + +#define TPGS_STATE_OPTIMIZED 0x0 +#define TPGS_STATE_NONOPTIMIZED 0x1 +#define TPGS_STATE_STANDBY 0x2 +#define TPGS_STATE_UNAVAILABLE 0x3 +#define TPGS_STATE_LBA_DEPENDENT 0x4 +#define TPGS_STATE_OFFLINE 0xe +#define TPGS_STATE_TRANSITIONING 0xf + +#define TPGS_SUPPORT_NONE 0x00 +#define TPGS_SUPPORT_OPTIMIZED 0x01 +#define TPGS_SUPPORT_NONOPTIMIZED 0x02 +#define TPGS_SUPPORT_STANDBY 0x04 +#define TPGS_SUPPORT_UNAVAILABLE 0x08 +#define TPGS_SUPPORT_LBA_DEPENDENT 0x10 +#define TPGS_SUPPORT_OFFLINE 0x40 +#define TPGS_SUPPORT_TRANSITION 0x80 + +#define RTPG_FMT_MASK 0x70 +#define RTPG_FMT_EXT_HDR 0x10 + +#define TPGS_MODE_UNINITIALIZED -1 +#define TPGS_MODE_NONE 0x0 +#define TPGS_MODE_IMPLICIT 0x1 +#define TPGS_MODE_EXPLICIT 0x2 + +#define ALUA_INQUIRY_SIZE 36 +#define ALUA_FAILOVER_TIMEOUT 60 +#define ALUA_FAILOVER_RETRIES 5 + +/* flags passed from user level */ +#define ALUA_OPTIMIZE_STPG 1 + +struct alua_dh_data { + struct scsi_dh_data dh_data; + int group_id; + int rel_port; + int tpgs; + int state; + int pref; + unsigned flags; /* used for optimizing STPG */ + unsigned char inq[ALUA_INQUIRY_SIZE]; + unsigned char *buff; + int bufflen; + unsigned char transition_tmo; + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + int senselen; + struct scsi_device *sdev; + activate_complete callback_fn; + void *callback_data; +}; + +#define ALUA_POLICY_SWITCH_CURRENT 0 +#define ALUA_POLICY_SWITCH_ALL 1 + +static char print_alua_state(int); +static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *); + +static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev) +{ + return container_of(sdev->scsi_dh_data, struct alua_dh_data, dh_data); +} + +static int realloc_buffer(struct alua_dh_data *h, unsigned len) +{ + if (h->buff && h->buff != h->inq) + kfree(h->buff); + + h->buff = kmalloc(len, GFP_NOIO); + if (!h->buff) { + h->buff = h->inq; + h->bufflen = ALUA_INQUIRY_SIZE; + return 1; + } + h->bufflen = len; + return 0; +} + +static struct request *get_alua_req(struct scsi_device *sdev, + void *buffer, unsigned buflen, int rw) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + + rq = blk_get_request(q, rw, GFP_NOIO); + + if (IS_ERR(rq)) { + sdev_printk(KERN_INFO, sdev, + "%s: blk_get_request failed\n", __func__); + return NULL; + } + blk_rq_set_block_pc(rq); + + if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) { + blk_put_request(rq); + sdev_printk(KERN_INFO, sdev, + "%s: blk_rq_map_kern failed\n", __func__); + return NULL; + } + + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + rq->retries = ALUA_FAILOVER_RETRIES; + rq->timeout = ALUA_FAILOVER_TIMEOUT * HZ; + + return rq; +} + +/* + * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command + * @sdev: sdev the command should be sent to + */ +static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h) +{ + struct request *rq; + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = get_alua_req(sdev, h->buff, h->bufflen, READ); + if (!rq) + goto done; + + /* Prepare the command. */ + rq->cmd[0] = INQUIRY; + rq->cmd[1] = 1; + rq->cmd[2] = 0x83; + rq->cmd[4] = h->bufflen; + rq->cmd_len = COMMAND_SIZE(INQUIRY); + + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = h->senselen = 0; + + err = blk_execute_rq(rq->q, NULL, rq, 1); + if (err == -EIO) { + sdev_printk(KERN_INFO, sdev, + "%s: evpd inquiry failed with %x\n", + ALUA_DH_NAME, rq->errors); + h->senselen = rq->sense_len; + err = SCSI_DH_IO; + } + blk_put_request(rq); +done: + return err; +} + +/* + * submit_rtpg - Issue a REPORT TARGET GROUP STATES command + * @sdev: sdev the command should be sent to + */ +static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, + bool rtpg_ext_hdr_req) +{ + struct request *rq; + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = get_alua_req(sdev, h->buff, h->bufflen, READ); + if (!rq) + goto done; + + /* Prepare the command. */ + rq->cmd[0] = MAINTENANCE_IN; + if (rtpg_ext_hdr_req) + rq->cmd[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT; + else + rq->cmd[1] = MI_REPORT_TARGET_PGS; + rq->cmd[6] = (h->bufflen >> 24) & 0xff; + rq->cmd[7] = (h->bufflen >> 16) & 0xff; + rq->cmd[8] = (h->bufflen >> 8) & 0xff; + rq->cmd[9] = h->bufflen & 0xff; + rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN); + + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = h->senselen = 0; + + err = blk_execute_rq(rq->q, NULL, rq, 1); + if (err == -EIO) { + sdev_printk(KERN_INFO, sdev, + "%s: rtpg failed with %x\n", + ALUA_DH_NAME, rq->errors); + h->senselen = rq->sense_len; + err = SCSI_DH_IO; + } + blk_put_request(rq); +done: + return err; +} + +/* + * alua_stpg - Evaluate SET TARGET GROUP STATES + * @sdev: the device to be evaluated + * @state: the new target group state + * + * Send a SET TARGET GROUP STATES command to the device. + * We only have to test here if we should resubmit the command; + * any other error is assumed as a failure. + */ +static void stpg_endio(struct request *req, int error) +{ + struct alua_dh_data *h = req->end_io_data; + struct scsi_sense_hdr sense_hdr; + unsigned err = SCSI_DH_OK; + + if (host_byte(req->errors) != DID_OK || + msg_byte(req->errors) != COMMAND_COMPLETE) { + err = SCSI_DH_IO; + goto done; + } + + if (req->sense_len > 0) { + err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, + &sense_hdr); + if (!err) { + err = SCSI_DH_IO; + goto done; + } + err = alua_check_sense(h->sdev, &sense_hdr); + if (err == ADD_TO_MLQUEUE) { + err = SCSI_DH_RETRY; + goto done; + } + sdev_printk(KERN_INFO, h->sdev, + "%s: stpg sense code: %02x/%02x/%02x\n", + ALUA_DH_NAME, sense_hdr.sense_key, + sense_hdr.asc, sense_hdr.ascq); + err = SCSI_DH_IO; + } else if (error) + err = SCSI_DH_IO; + + if (err == SCSI_DH_OK) { + h->state = TPGS_STATE_OPTIMIZED; + sdev_printk(KERN_INFO, h->sdev, + "%s: port group %02x switched to state %c\n", + ALUA_DH_NAME, h->group_id, + print_alua_state(h->state)); + } +done: + req->end_io_data = NULL; + __blk_put_request(req->q, req); + if (h->callback_fn) { + h->callback_fn(h->callback_data, err); + h->callback_fn = h->callback_data = NULL; + } + return; +} + +/* + * submit_stpg - Issue a SET TARGET GROUP STATES command + * + * Currently we're only setting the current target port group state + * to 'active/optimized' and let the array firmware figure out + * the states of the remaining groups. + */ +static unsigned submit_stpg(struct alua_dh_data *h) +{ + struct request *rq; + int stpg_len = 8; + struct scsi_device *sdev = h->sdev; + + /* Prepare the data buffer */ + memset(h->buff, 0, stpg_len); + h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f; + h->buff[6] = (h->group_id >> 8) & 0xff; + h->buff[7] = h->group_id & 0xff; + + rq = get_alua_req(sdev, h->buff, stpg_len, WRITE); + if (!rq) + return SCSI_DH_RES_TEMP_UNAVAIL; + + /* Prepare the command. */ + rq->cmd[0] = MAINTENANCE_OUT; + rq->cmd[1] = MO_SET_TARGET_PGS; + rq->cmd[6] = (stpg_len >> 24) & 0xff; + rq->cmd[7] = (stpg_len >> 16) & 0xff; + rq->cmd[8] = (stpg_len >> 8) & 0xff; + rq->cmd[9] = stpg_len & 0xff; + rq->cmd_len = COMMAND_SIZE(MAINTENANCE_OUT); + + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = h->senselen = 0; + rq->end_io_data = h; + + blk_execute_rq_nowait(rq->q, NULL, rq, 1, stpg_endio); + return SCSI_DH_OK; +} + +/* + * alua_check_tpgs - Evaluate TPGS setting + * @sdev: device to be checked + * + * Examine the TPGS setting of the sdev to find out if ALUA + * is supported. + */ +static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h) +{ + int err = SCSI_DH_OK; + + h->tpgs = scsi_device_tpgs(sdev); + switch (h->tpgs) { + case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT: + sdev_printk(KERN_INFO, sdev, + "%s: supports implicit and explicit TPGS\n", + ALUA_DH_NAME); + break; + case TPGS_MODE_EXPLICIT: + sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n", + ALUA_DH_NAME); + break; + case TPGS_MODE_IMPLICIT: + sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n", + ALUA_DH_NAME); + break; + default: + h->tpgs = TPGS_MODE_NONE; + sdev_printk(KERN_INFO, sdev, "%s: not supported\n", + ALUA_DH_NAME); + err = SCSI_DH_DEV_UNSUPP; + break; + } + + return err; +} + +/* + * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83 + * @sdev: device to be checked + * + * Extract the relative target port and the target port group + * descriptor from the list of identificators. + */ +static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h) +{ + int len; + unsigned err; + unsigned char *d; + + retry: + err = submit_vpd_inquiry(sdev, h); + + if (err != SCSI_DH_OK) + return err; + + /* Check if vpd page exceeds initial buffer */ + len = (h->buff[2] << 8) + h->buff[3] + 4; + if (len > h->bufflen) { + /* Resubmit with the correct length */ + if (realloc_buffer(h, len)) { + sdev_printk(KERN_WARNING, sdev, + "%s: kmalloc buffer failed\n", + ALUA_DH_NAME); + /* Temporary failure, bypass */ + return SCSI_DH_DEV_TEMP_BUSY; + } + goto retry; + } + + /* + * Now look for the correct descriptor. + */ + d = h->buff + 4; + while (d < h->buff + len) { + switch (d[1] & 0xf) { + case 0x4: + /* Relative target port */ + h->rel_port = (d[6] << 8) + d[7]; + break; + case 0x5: + /* Target port group */ + h->group_id = (d[6] << 8) + d[7]; + break; + default: + break; + } + d += d[3] + 4; + } + + if (h->group_id == -1) { + /* + * Internal error; TPGS supported but required + * VPD identification descriptors not present. + * Disable ALUA support + */ + sdev_printk(KERN_INFO, sdev, + "%s: No target port descriptors found\n", + ALUA_DH_NAME); + h->state = TPGS_STATE_OPTIMIZED; + h->tpgs = TPGS_MODE_NONE; + err = SCSI_DH_DEV_UNSUPP; + } else { + sdev_printk(KERN_INFO, sdev, + "%s: port group %02x rel port %02x\n", + ALUA_DH_NAME, h->group_id, h->rel_port); + } + + return err; +} + +static char print_alua_state(int state) +{ + switch (state) { + case TPGS_STATE_OPTIMIZED: + return 'A'; + case TPGS_STATE_NONOPTIMIZED: + return 'N'; + case TPGS_STATE_STANDBY: + return 'S'; + case TPGS_STATE_UNAVAILABLE: + return 'U'; + case TPGS_STATE_LBA_DEPENDENT: + return 'L'; + case TPGS_STATE_OFFLINE: + return 'O'; + case TPGS_STATE_TRANSITIONING: + return 'T'; + default: + return 'X'; + } +} + +static int alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) + /* + * LUN Not Accessible - ALUA state transition + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b) + /* + * LUN Not Accessible -- Target port in standby state + */ + return SUCCESS; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c) + /* + * LUN Not Accessible -- Target port in unavailable state + */ + return SUCCESS; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12) + /* + * LUN Not Ready -- Offline + */ + return SUCCESS; + if (sdev->allow_restart && + sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02) + /* + * if the device is not started, we need to wake + * the error handler to start the motor + */ + return FAILED; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Power On, Reset, or Bus Device Reset, just retry. + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04) + /* + * Device internal reset + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01) + /* + * Mode Parameters Changed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) + /* + * ALUA state changed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) + /* + * Implicit ALUA state transition failed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03) + /* + * Inquiry data has changed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e) + /* + * REPORTED_LUNS_DATA_HAS_CHANGED is reported + * when switching controllers on targets like + * Intel Multi-Flex. We can just retry. + */ + return ADD_TO_MLQUEUE; + break; + } + + return SCSI_RETURN_NOT_HANDLED; +} + +/* + * alua_rtpg - Evaluate REPORT TARGET GROUP STATES + * @sdev: the device to be evaluated. + * @wait_for_transition: if nonzero, wait ALUA_FAILOVER_TIMEOUT seconds for device to exit transitioning state + * + * Evaluate the Target Port Group State. + * Returns SCSI_DH_DEV_OFFLINED if the path is + * found to be unusable. + */ +static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_for_transition) +{ + struct scsi_sense_hdr sense_hdr; + int len, k, off, valid_states = 0; + unsigned char *ucp; + unsigned err; + bool rtpg_ext_hdr_req = 1; + unsigned long expiry, interval = 0; + unsigned int tpg_desc_tbl_off; + unsigned char orig_transition_tmo; + + if (!h->transition_tmo) + expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT * HZ); + else + expiry = round_jiffies_up(jiffies + h->transition_tmo * HZ); + + retry: + err = submit_rtpg(sdev, h, rtpg_ext_hdr_req); + + if (err == SCSI_DH_IO && h->senselen > 0) { + err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, + &sense_hdr); + if (!err) + return SCSI_DH_IO; + + /* + * submit_rtpg() has failed on existing arrays + * when requesting extended header info, and + * the array doesn't support extended headers, + * even though it shouldn't according to T10. + * The retry without rtpg_ext_hdr_req set + * handles this. + */ + if (rtpg_ext_hdr_req == 1 && + sense_hdr.sense_key == ILLEGAL_REQUEST && + sense_hdr.asc == 0x24 && sense_hdr.ascq == 0) { + rtpg_ext_hdr_req = 0; + goto retry; + } + + err = alua_check_sense(sdev, &sense_hdr); + if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry)) + goto retry; + sdev_printk(KERN_INFO, sdev, + "%s: rtpg sense code %02x/%02x/%02x\n", + ALUA_DH_NAME, sense_hdr.sense_key, + sense_hdr.asc, sense_hdr.ascq); + err = SCSI_DH_IO; + } + if (err != SCSI_DH_OK) + return err; + + len = (h->buff[0] << 24) + (h->buff[1] << 16) + + (h->buff[2] << 8) + h->buff[3] + 4; + + if (len > h->bufflen) { + /* Resubmit with the correct length */ + if (realloc_buffer(h, len)) { + sdev_printk(KERN_WARNING, sdev, + "%s: kmalloc buffer failed\n",__func__); + /* Temporary failure, bypass */ + return SCSI_DH_DEV_TEMP_BUSY; + } + goto retry; + } + + orig_transition_tmo = h->transition_tmo; + if ((h->buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR && h->buff[5] != 0) + h->transition_tmo = h->buff[5]; + else + h->transition_tmo = ALUA_FAILOVER_TIMEOUT; + + if (wait_for_transition && (orig_transition_tmo != h->transition_tmo)) { + sdev_printk(KERN_INFO, sdev, + "%s: transition timeout set to %d seconds\n", + ALUA_DH_NAME, h->transition_tmo); + expiry = jiffies + h->transition_tmo * HZ; + } + + if ((h->buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR) + tpg_desc_tbl_off = 8; + else + tpg_desc_tbl_off = 4; + + for (k = tpg_desc_tbl_off, ucp = h->buff + tpg_desc_tbl_off; + k < len; + k += off, ucp += off) { + + if (h->group_id == (ucp[2] << 8) + ucp[3]) { + h->state = ucp[0] & 0x0f; + h->pref = ucp[0] >> 7; + valid_states = ucp[1]; + } + off = 8 + (ucp[7] * 4); + } + + sdev_printk(KERN_INFO, sdev, + "%s: port group %02x state %c %s supports %c%c%c%c%c%c%c\n", + ALUA_DH_NAME, h->group_id, print_alua_state(h->state), + h->pref ? "preferred" : "non-preferred", + valid_states&TPGS_SUPPORT_TRANSITION?'T':'t', + valid_states&TPGS_SUPPORT_OFFLINE?'O':'o', + valid_states&TPGS_SUPPORT_LBA_DEPENDENT?'L':'l', + valid_states&TPGS_SUPPORT_UNAVAILABLE?'U':'u', + valid_states&TPGS_SUPPORT_STANDBY?'S':'s', + valid_states&TPGS_SUPPORT_NONOPTIMIZED?'N':'n', + valid_states&TPGS_SUPPORT_OPTIMIZED?'A':'a'); + + switch (h->state) { + case TPGS_STATE_TRANSITIONING: + if (wait_for_transition) { + if (time_before(jiffies, expiry)) { + /* State transition, retry */ + interval += 2000; + msleep(interval); + goto retry; + } + err = SCSI_DH_RETRY; + } else { + err = SCSI_DH_OK; + } + + /* Transitioning time exceeded, set port to standby */ + h->state = TPGS_STATE_STANDBY; + break; + case TPGS_STATE_OFFLINE: + /* Path unusable */ + err = SCSI_DH_DEV_OFFLINED; + break; + default: + /* Useable path if active */ + err = SCSI_DH_OK; + break; + } + return err; +} + +/* + * alua_initialize - Initialize ALUA state + * @sdev: the device to be initialized + * + * For the prep_fn to work correctly we have + * to initialize the ALUA state for the device. + */ +static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h) +{ + int err; + + err = alua_check_tpgs(sdev, h); + if (err != SCSI_DH_OK) + goto out; + + err = alua_vpd_inquiry(sdev, h); + if (err != SCSI_DH_OK) + goto out; + + err = alua_rtpg(sdev, h, 0); + if (err != SCSI_DH_OK) + goto out; + +out: + return err; +} +/* + * alua_set_params - set/unset the optimize flag + * @sdev: device on the path to be activated + * params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * For example, to set the flag pass the following parameters + * from multipath.conf + * hardware_handler "2 alua 1" + */ +static int alua_set_params(struct scsi_device *sdev, const char *params) +{ + struct alua_dh_data *h = get_alua_data(sdev); + unsigned int optimize = 0, argc; + const char *p = params; + int result = SCSI_DH_OK; + + if ((sscanf(params, "%u", &argc) != 1) || (argc != 1)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &optimize) != 1) || (optimize > 1)) + return -EINVAL; + + if (optimize) + h->flags |= ALUA_OPTIMIZE_STPG; + else + h->flags &= ~ALUA_OPTIMIZE_STPG; + + return result; +} + +static uint optimize_stpg; +module_param(optimize_stpg, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than sending a STPG, when implicit TPGS is supported (0=No,1=Yes). Default is 0."); + +/* + * alua_activate - activate a path + * @sdev: device on the path to be activated + * + * We're currently switching the port group to be activated only and + * let the array figure out the rest. + * There may be other arrays which require us to switch all port groups + * based on a certain policy. But until we actually encounter them it + * should be okay. + */ +static int alua_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct alua_dh_data *h = get_alua_data(sdev); + int err = SCSI_DH_OK; + int stpg = 0; + + err = alua_rtpg(sdev, h, 1); + if (err != SCSI_DH_OK) + goto out; + + if (optimize_stpg) + h->flags |= ALUA_OPTIMIZE_STPG; + + if (h->tpgs & TPGS_MODE_EXPLICIT) { + switch (h->state) { + case TPGS_STATE_NONOPTIMIZED: + stpg = 1; + if ((h->flags & ALUA_OPTIMIZE_STPG) && + (!h->pref) && + (h->tpgs & TPGS_MODE_IMPLICIT)) + stpg = 0; + break; + case TPGS_STATE_STANDBY: + case TPGS_STATE_UNAVAILABLE: + stpg = 1; + break; + case TPGS_STATE_OFFLINE: + err = SCSI_DH_IO; + break; + case TPGS_STATE_TRANSITIONING: + err = SCSI_DH_RETRY; + break; + default: + break; + } + } + + if (stpg) { + h->callback_fn = fn; + h->callback_data = data; + err = submit_stpg(h); + if (err == SCSI_DH_OK) + return 0; + h->callback_fn = h->callback_data = NULL; + } + +out: + if (fn) + fn(data, err); + return 0; +} + +/* + * alua_prep_fn - request callback + * + * Fail I/O to all paths not in state + * active/optimized or active/non-optimized. + */ +static int alua_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct alua_dh_data *h = get_alua_data(sdev); + int ret = BLKPREP_OK; + + if (h->state == TPGS_STATE_TRANSITIONING) + ret = BLKPREP_DEFER; + else if (h->state != TPGS_STATE_OPTIMIZED && + h->state != TPGS_STATE_NONOPTIMIZED && + h->state != TPGS_STATE_LBA_DEPENDENT) { + ret = BLKPREP_KILL; + req->cmd_flags |= REQ_QUIET; + } + return ret; + +} + +static bool alua_match(struct scsi_device *sdev) +{ + return (scsi_device_tpgs(sdev) != 0); +} + +/* + * alua_bus_attach - Attach device handler + * @sdev: device to be attached to + */ +static struct scsi_dh_data *alua_bus_attach(struct scsi_device *sdev) +{ + struct alua_dh_data *h; + int err; + + h = kzalloc(sizeof(*h) , GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + h->tpgs = TPGS_MODE_UNINITIALIZED; + h->state = TPGS_STATE_OPTIMIZED; + h->group_id = -1; + h->rel_port = -1; + h->buff = h->inq; + h->bufflen = ALUA_INQUIRY_SIZE; + h->sdev = sdev; + + err = alua_initialize(sdev, h); + if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED) + goto failed; + + sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME); + return &h->dh_data; +failed: + kfree(h); + return ERR_PTR(-EINVAL); +} + +/* + * alua_bus_detach - Detach device handler + * @sdev: device to be detached from + */ +static void alua_bus_detach(struct scsi_device *sdev) +{ + struct alua_dh_data *h = get_alua_data(sdev); + + if (h->buff && h->inq != h->buff) + kfree(h->buff); + kfree(h); +} + +static struct scsi_device_handler alua_dh = { + .name = ALUA_DH_NAME, + .module = THIS_MODULE, + .attach = alua_bus_attach, + .detach = alua_bus_detach, + .prep_fn = alua_prep_fn, + .check_sense = alua_check_sense, + .activate = alua_activate, + .set_params = alua_set_params, + .match = alua_match, +}; + +static int __init alua_init(void) +{ + int r; + + r = scsi_register_device_handler(&alua_dh); + if (r != 0) + printk(KERN_ERR "%s: Failed to register scsi device handler", + ALUA_DH_NAME); + return r; +} + +static void __exit alua_exit(void) +{ + scsi_unregister_device_handler(&alua_dh); +} + +module_init(alua_init); +module_exit(alua_exit); + +MODULE_DESCRIPTION("DM Multipath ALUA support"); +MODULE_AUTHOR("Hannes Reinecke "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ALUA_DH_VER); diff --git a/kernel/drivers/scsi/device_handler/scsi_dh_emc.c b/kernel/drivers/scsi/device_handler/scsi_dh_emc.c new file mode 100644 index 000000000..6ed1caadb --- /dev/null +++ b/kernel/drivers/scsi/device_handler/scsi_dh_emc.c @@ -0,0 +1,725 @@ +/* + * Target driver for EMC CLARiiON AX/CX-series hardware. + * Based on code from Lars Marowsky-Bree + * and Ed Goggin . + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include + +#define CLARIION_NAME "emc" + +#define CLARIION_TRESPASS_PAGE 0x22 +#define CLARIION_BUFFER_SIZE 0xFC +#define CLARIION_TIMEOUT (60 * HZ) +#define CLARIION_RETRIES 3 +#define CLARIION_UNBOUND_LU -1 +#define CLARIION_SP_A 0 +#define CLARIION_SP_B 1 + +/* Flags */ +#define CLARIION_SHORT_TRESPASS 1 +#define CLARIION_HONOR_RESERVATIONS 2 + +/* LUN states */ +#define CLARIION_LUN_UNINITIALIZED -1 +#define CLARIION_LUN_UNBOUND 0 +#define CLARIION_LUN_BOUND 1 +#define CLARIION_LUN_OWNED 2 + +static unsigned char long_trespass[] = { + 0, 0, 0, 0, 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x09, /* Page length - 2 */ + 0x01, /* Trespass code */ + 0xff, 0xff, /* Trespass target */ + 0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */ +}; + +static unsigned char short_trespass[] = { + 0, 0, 0, 0, + CLARIION_TRESPASS_PAGE, /* Page code */ + 0x02, /* Page length - 2 */ + 0x01, /* Trespass code */ + 0xff, /* Trespass target */ +}; + +static const char * lun_state[] = +{ + "not bound", + "bound", + "owned", +}; + +struct clariion_dh_data { + struct scsi_dh_data dh_data; + /* + * Flags: + * CLARIION_SHORT_TRESPASS + * Use short trespass command (FC-series) or the long version + * (default for AX/CX CLARiiON arrays). + * + * CLARIION_HONOR_RESERVATIONS + * Whether or not (default) to honor SCSI reservations when + * initiating a switch-over. + */ + unsigned flags; + /* + * I/O buffer for both MODE_SELECT and INQUIRY commands. + */ + unsigned char buffer[CLARIION_BUFFER_SIZE]; + /* + * SCSI sense buffer for commands -- assumes serial issuance + * and completion sequence of all commands for same multipath. + */ + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + unsigned int senselen; + /* + * LUN state + */ + int lun_state; + /* + * SP Port number + */ + int port; + /* + * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this + * path's mapped LUN + */ + int default_sp; + /* + * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this + * path's mapped LUN + */ + int current_sp; +}; + +static inline struct clariion_dh_data + *get_clariion_data(struct scsi_device *sdev) +{ + return container_of(sdev->scsi_dh_data, struct clariion_dh_data, + dh_data); +} + +/* + * Parse MODE_SELECT cmd reply. + */ +static int trespass_endio(struct scsi_device *sdev, char *sense) +{ + int err = SCSI_DH_IO; + struct scsi_sense_hdr sshdr; + + if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) { + sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, " + "0x%2x, 0x%2x while sending CLARiiON trespass " + "command.\n", CLARIION_NAME, sshdr.sense_key, + sshdr.asc, sshdr.ascq); + + if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x00)) { + /* + * Array based copy in progress -- do not send + * mode_select or copy will be aborted mid-stream. + */ + sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in " + "progress while sending CLARiiON trespass " + "command.\n", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + } else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) && + (sshdr.ascq == 0x03)) { + /* + * LUN Not Ready - Manual Intervention Required + * indicates in-progress ucode upgrade (NDU). + */ + sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress " + "ucode upgrade NDU operation while sending " + "CLARiiON trespass command.\n", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + } else + err = SCSI_DH_DEV_FAILED; + } else { + sdev_printk(KERN_INFO, sdev, + "%s: failed to send MODE SELECT, no sense available\n", + CLARIION_NAME); + } + return err; +} + +static int parse_sp_info_reply(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err = SCSI_DH_OK; + + /* check for in-progress ucode upgrade (NDU) */ + if (csdev->buffer[48] != 0) { + sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress " + "ucode upgrade NDU operation while finding " + "current active SP.", CLARIION_NAME); + err = SCSI_DH_DEV_TEMP_BUSY; + goto out; + } + if (csdev->buffer[4] > 2) { + /* Invalid buffer format */ + sdev_printk(KERN_NOTICE, sdev, + "%s: invalid VPD page 0xC0 format\n", + CLARIION_NAME); + err = SCSI_DH_NOSYS; + goto out; + } + switch (csdev->buffer[28] & 0x0f) { + case 6: + sdev_printk(KERN_NOTICE, sdev, + "%s: ALUA failover mode detected\n", + CLARIION_NAME); + break; + case 4: + /* Linux failover */ + break; + default: + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid failover mode %d\n", + CLARIION_NAME, csdev->buffer[28] & 0x0f); + err = SCSI_DH_NOSYS; + goto out; + } + + csdev->default_sp = csdev->buffer[5]; + csdev->lun_state = csdev->buffer[4]; + csdev->current_sp = csdev->buffer[8]; + csdev->port = csdev->buffer[7]; + +out: + return err; +} + +#define emc_default_str "FC (Legacy)" + +static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer) +{ + unsigned char len = buffer[4] + 5; + char *sp_model = NULL; + unsigned char sp_len, serial_len; + + if (len < 160) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid information section length %d\n", + CLARIION_NAME, len); + /* Check for old FC arrays */ + if (!strncmp(buffer + 8, "DGC", 3)) { + /* Old FC array, not supporting extended information */ + sp_model = emc_default_str; + } + goto out; + } + + /* + * Parse extended information for SP model number + */ + serial_len = buffer[160]; + if (serial_len == 0 || serial_len + 161 > len) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid array serial number length %d\n", + CLARIION_NAME, serial_len); + goto out; + } + sp_len = buffer[99]; + if (sp_len == 0 || serial_len + sp_len + 161 > len) { + sdev_printk(KERN_WARNING, sdev, + "%s: Invalid model number length %d\n", + CLARIION_NAME, sp_len); + goto out; + } + sp_model = &buffer[serial_len + 161]; + /* Strip whitespace at the end */ + while (sp_len > 1 && sp_model[sp_len - 1] == ' ') + sp_len--; + + sp_model[sp_len] = '\0'; + +out: + return sp_model; +} + +/* + * Get block request for REQ_BLOCK_PC command issued to path. Currently + * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands. + * + * Uses data and sense buffers in hardware handler context structure and + * assumes serial servicing of commands, both issuance and completion. + */ +static struct request *get_req(struct scsi_device *sdev, int cmd, + unsigned char *buffer) +{ + struct request *rq; + int len = 0; + + rq = blk_get_request(sdev->request_queue, + (cmd != INQUIRY) ? WRITE : READ, GFP_NOIO); + if (IS_ERR(rq)) { + sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed"); + return NULL; + } + + blk_rq_set_block_pc(rq); + rq->cmd_len = COMMAND_SIZE(cmd); + rq->cmd[0] = cmd; + + switch (cmd) { + case MODE_SELECT: + len = sizeof(short_trespass); + rq->cmd[1] = 0x10; + rq->cmd[4] = len; + break; + case MODE_SELECT_10: + len = sizeof(long_trespass); + rq->cmd[1] = 0x10; + rq->cmd[8] = len; + break; + case INQUIRY: + len = CLARIION_BUFFER_SIZE; + rq->cmd[4] = len; + memset(buffer, 0, len); + break; + default: + BUG_ON(1); + break; + } + + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + rq->timeout = CLARIION_TIMEOUT; + rq->retries = CLARIION_RETRIES; + + if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) { + blk_put_request(rq); + return NULL; + } + + return rq; +} + +static int send_inquiry_cmd(struct scsi_device *sdev, int page, + struct clariion_dh_data *csdev) +{ + struct request *rq = get_req(sdev, INQUIRY, csdev->buffer); + int err; + + if (!rq) + return SCSI_DH_RES_TEMP_UNAVAIL; + + rq->sense = csdev->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = csdev->senselen = 0; + + rq->cmd[0] = INQUIRY; + if (page != 0) { + rq->cmd[1] = 1; + rq->cmd[2] = page; + } + err = blk_execute_rq(sdev->request_queue, NULL, rq, 1); + if (err == -EIO) { + sdev_printk(KERN_INFO, sdev, + "%s: failed to send %s INQUIRY: %x\n", + CLARIION_NAME, page?"EVPD":"standard", + rq->errors); + csdev->senselen = rq->sense_len; + err = SCSI_DH_IO; + } + + blk_put_request(rq); + + return err; +} + +static int send_trespass_cmd(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + struct request *rq; + unsigned char *page22; + int err, len, cmd; + + if (csdev->flags & CLARIION_SHORT_TRESPASS) { + page22 = short_trespass; + if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) + /* Set Honor Reservations bit */ + page22[6] |= 0x80; + len = sizeof(short_trespass); + cmd = MODE_SELECT; + } else { + page22 = long_trespass; + if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS)) + /* Set Honor Reservations bit */ + page22[10] |= 0x80; + len = sizeof(long_trespass); + cmd = MODE_SELECT_10; + } + BUG_ON((len > CLARIION_BUFFER_SIZE)); + memcpy(csdev->buffer, page22, len); + + rq = get_req(sdev, cmd, csdev->buffer); + if (!rq) + return SCSI_DH_RES_TEMP_UNAVAIL; + + rq->sense = csdev->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = csdev->senselen = 0; + + err = blk_execute_rq(sdev->request_queue, NULL, rq, 1); + if (err == -EIO) { + if (rq->sense_len) { + err = trespass_endio(sdev, csdev->sense); + } else { + sdev_printk(KERN_INFO, sdev, + "%s: failed to send MODE SELECT: %x\n", + CLARIION_NAME, rq->errors); + } + } + + blk_put_request(rq); + + return err; +} + +static int clariion_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03) + /* + * LUN Not Ready - Manual Intervention Required + * indicates this is a passive path. + * + * FIXME: However, if this is seen and EVPD C0 + * indicates that this is due to a NDU in + * progress, we should set FAIL_PATH too. + * This indicates we might have to do a SCSI + * inquiry in the end_io path. Ugh. + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01) + /* + * An array based copy is in progress. Do not + * fail the path, do not bypass to another PG, + * do not retry. Fail the IO immediately. + * (Actually this is the same conclusion as in + * the default handler, but lets make sure.) + * + * Can return FAILED only when we want the error + * recovery process to kick in. + */ + return SUCCESS; + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Unit Attention Code. This is the first IO + * to the new path, so just retry. + */ + return ADD_TO_MLQUEUE; + break; + } + + return SCSI_RETURN_NOT_HANDLED; +} + +static int clariion_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct clariion_dh_data *h = get_clariion_data(sdev); + int ret = BLKPREP_OK; + + if (h->lun_state != CLARIION_LUN_OWNED) { + ret = BLKPREP_KILL; + req->cmd_flags |= REQ_QUIET; + } + return ret; + +} + +static int clariion_std_inquiry(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err; + char *sp_model; + + err = send_inquiry_cmd(sdev, 0, csdev); + if (err != SCSI_DH_OK && csdev->senselen) { + struct scsi_sense_hdr sshdr; + + if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, + &sshdr)) { + sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " + "%02x/%02x/%02x\n", CLARIION_NAME, + sshdr.sense_key, sshdr.asc, sshdr.ascq); + } + err = SCSI_DH_IO; + goto out; + } + + sp_model = parse_sp_model(sdev, csdev->buffer); + if (!sp_model) { + err = SCSI_DH_DEV_UNSUPP; + goto out; + } + + /* + * FC Series arrays do not support long trespass + */ + if (!strlen(sp_model) || !strncmp(sp_model, "FC",2)) + csdev->flags |= CLARIION_SHORT_TRESPASS; + + sdev_printk(KERN_INFO, sdev, + "%s: detected Clariion %s, flags %x\n", + CLARIION_NAME, sp_model, csdev->flags); +out: + return err; +} + +static int clariion_send_inquiry(struct scsi_device *sdev, + struct clariion_dh_data *csdev) +{ + int err, retry = CLARIION_RETRIES; + +retry: + err = send_inquiry_cmd(sdev, 0xC0, csdev); + if (err != SCSI_DH_OK && csdev->senselen) { + struct scsi_sense_hdr sshdr; + + err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE, + &sshdr); + if (!err) + return SCSI_DH_IO; + + err = clariion_check_sense(sdev, &sshdr); + if (retry > 0 && err == ADD_TO_MLQUEUE) { + retry--; + goto retry; + } + sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " + "%02x/%02x/%02x\n", CLARIION_NAME, + sshdr.sense_key, sshdr.asc, sshdr.ascq); + err = SCSI_DH_IO; + } else { + err = parse_sp_info_reply(sdev, csdev); + } + return err; +} + +static int clariion_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + int result; + + result = clariion_send_inquiry(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + + if (csdev->lun_state == CLARIION_LUN_OWNED) + goto done; + + result = send_trespass_cmd(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n", + CLARIION_NAME, + csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" ); + + /* Update status */ + result = clariion_send_inquiry(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + +done: + sdev_printk(KERN_INFO, sdev, + "%s: at SP %c Port %d (%s, default SP %c)\n", + CLARIION_NAME, csdev->current_sp + 'A', + csdev->port, lun_state[csdev->lun_state], + csdev->default_sp + 'A'); + + if (fn) + fn(data, result); + return 0; +} +/* + * params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * for example, string for 2 parameters with value 10 and 21 + * is specified as "2\010\021\0". + */ +static int clariion_set_params(struct scsi_device *sdev, const char *params) +{ + struct clariion_dh_data *csdev = get_clariion_data(sdev); + unsigned int hr = 0, st = 0, argc; + const char *p = params; + int result = SCSI_DH_OK; + + if ((sscanf(params, "%u", &argc) != 1) || (argc != 2)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &st) != 1) || (st > 1)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &hr) != 1) || (hr > 1)) + return -EINVAL; + + if (st) + csdev->flags |= CLARIION_SHORT_TRESPASS; + else + csdev->flags &= ~CLARIION_SHORT_TRESPASS; + + if (hr) + csdev->flags |= CLARIION_HONOR_RESERVATIONS; + else + csdev->flags &= ~CLARIION_HONOR_RESERVATIONS; + + /* + * If this path is owned, we have to send a trespass command + * with the new parameters. If not, simply return. Next trespass + * command would use the parameters. + */ + if (csdev->lun_state != CLARIION_LUN_OWNED) + goto done; + + csdev->lun_state = CLARIION_LUN_UNINITIALIZED; + result = send_trespass_cmd(sdev, csdev); + if (result != SCSI_DH_OK) + goto done; + + /* Update status */ + result = clariion_send_inquiry(sdev, csdev); + +done: + return result; +} + +static const struct { + char *vendor; + char *model; +} clariion_dev_list[] = { + {"DGC", "RAID"}, + {"DGC", "DISK"}, + {"DGC", "VRAID"}, + {NULL, NULL}, +}; + +static bool clariion_match(struct scsi_device *sdev) +{ + int i; + + if (scsi_device_tpgs(sdev)) + return false; + + for (i = 0; clariion_dev_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor, + strlen(clariion_dev_list[i].vendor)) && + !strncmp(sdev->model, clariion_dev_list[i].model, + strlen(clariion_dev_list[i].model))) { + return true; + } + } + return false; +} + +static struct scsi_dh_data *clariion_bus_attach(struct scsi_device *sdev) +{ + struct clariion_dh_data *h; + int err; + + h = kzalloc(sizeof(*h) , GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + h->lun_state = CLARIION_LUN_UNINITIALIZED; + h->default_sp = CLARIION_UNBOUND_LU; + h->current_sp = CLARIION_UNBOUND_LU; + + err = clariion_std_inquiry(sdev, h); + if (err != SCSI_DH_OK) + goto failed; + + err = clariion_send_inquiry(sdev, h); + if (err != SCSI_DH_OK) + goto failed; + + sdev_printk(KERN_INFO, sdev, + "%s: connected to SP %c Port %d (%s, default SP %c)\n", + CLARIION_NAME, h->current_sp + 'A', + h->port, lun_state[h->lun_state], + h->default_sp + 'A'); + return &h->dh_data; + +failed: + kfree(h); + return ERR_PTR(-EINVAL); +} + +static void clariion_bus_detach(struct scsi_device *sdev) +{ + struct clariion_dh_data *h = get_clariion_data(sdev); + + kfree(h); +} + +static struct scsi_device_handler clariion_dh = { + .name = CLARIION_NAME, + .module = THIS_MODULE, + .attach = clariion_bus_attach, + .detach = clariion_bus_detach, + .check_sense = clariion_check_sense, + .activate = clariion_activate, + .prep_fn = clariion_prep_fn, + .set_params = clariion_set_params, + .match = clariion_match, +}; + +static int __init clariion_init(void) +{ + int r; + + r = scsi_register_device_handler(&clariion_dh); + if (r != 0) + printk(KERN_ERR "%s: Failed to register scsi device handler.", + CLARIION_NAME); + return r; +} + +static void __exit clariion_exit(void) +{ + scsi_unregister_device_handler(&clariion_dh); +} + +module_init(clariion_init); +module_exit(clariion_exit); + +MODULE_DESCRIPTION("EMC CX/AX/FC-family driver"); +MODULE_AUTHOR("Mike Christie , Chandra Seetharaman "); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.c new file mode 100644 index 000000000..485d99544 --- /dev/null +++ b/kernel/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -0,0 +1,400 @@ +/* + * Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be + * upgraded. + * + * Copyright (C) 2006 Red Hat, Inc. All rights reserved. + * Copyright (C) 2006 Mike Christie + * Copyright (C) 2008 Hannes Reinecke + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#define HP_SW_NAME "hp_sw" + +#define HP_SW_TIMEOUT (60 * HZ) +#define HP_SW_RETRIES 3 + +#define HP_SW_PATH_UNINITIALIZED -1 +#define HP_SW_PATH_ACTIVE 0 +#define HP_SW_PATH_PASSIVE 1 + +struct hp_sw_dh_data { + struct scsi_dh_data dh_data; + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + int path_state; + int retries; + int retry_cnt; + struct scsi_device *sdev; + activate_complete callback_fn; + void *callback_data; +}; + +static int hp_sw_start_stop(struct hp_sw_dh_data *); + +static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev) +{ + return container_of(sdev->scsi_dh_data, struct hp_sw_dh_data, dh_data); +} + +/* + * tur_done - Handle TEST UNIT READY return status + * @sdev: sdev the command has been sent to + * @errors: blk error code + * + * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path + */ +static int tur_done(struct scsi_device *sdev, unsigned char *sense) +{ + struct scsi_sense_hdr sshdr; + int ret; + + ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr); + if (!ret) { + sdev_printk(KERN_WARNING, sdev, + "%s: sending tur failed, no sense available\n", + HP_SW_NAME); + ret = SCSI_DH_IO; + goto done; + } + switch (sshdr.sense_key) { + case UNIT_ATTENTION: + ret = SCSI_DH_IMM_RETRY; + break; + case NOT_READY: + if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) { + /* + * LUN not ready - Initialization command required + * + * This is the passive path + */ + ret = SCSI_DH_DEV_OFFLINED; + break; + } + /* Fallthrough */ + default: + sdev_printk(KERN_WARNING, sdev, + "%s: sending tur failed, sense %x/%x/%x\n", + HP_SW_NAME, sshdr.sense_key, sshdr.asc, + sshdr.ascq); + break; + } + +done: + return ret; +} + +/* + * hp_sw_tur - Send TEST UNIT READY + * @sdev: sdev command should be sent to + * + * Use the TEST UNIT READY command to determine + * the path state. + */ +static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) +{ + struct request *req; + int ret; + +retry: + req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); + if (IS_ERR(req)) + return SCSI_DH_RES_TEMP_UNAVAIL; + + blk_rq_set_block_pc(req); + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY); + req->cmd[0] = TEST_UNIT_READY; + req->timeout = HP_SW_TIMEOUT; + req->sense = h->sense; + memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); + req->sense_len = 0; + + ret = blk_execute_rq(req->q, NULL, req, 1); + if (ret == -EIO) { + if (req->sense_len > 0) { + ret = tur_done(sdev, h->sense); + } else { + sdev_printk(KERN_WARNING, sdev, + "%s: sending tur failed with %x\n", + HP_SW_NAME, req->errors); + ret = SCSI_DH_IO; + } + } else { + h->path_state = HP_SW_PATH_ACTIVE; + ret = SCSI_DH_OK; + } + if (ret == SCSI_DH_IMM_RETRY) { + blk_put_request(req); + goto retry; + } + if (ret == SCSI_DH_DEV_OFFLINED) { + h->path_state = HP_SW_PATH_PASSIVE; + ret = SCSI_DH_OK; + } + + blk_put_request(req); + + return ret; +} + +/* + * start_done - Handle START STOP UNIT return status + * @sdev: sdev the command has been sent to + * @errors: blk error code + */ +static int start_done(struct scsi_device *sdev, unsigned char *sense) +{ + struct scsi_sense_hdr sshdr; + int rc; + + rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr); + if (!rc) { + sdev_printk(KERN_WARNING, sdev, + "%s: sending start_stop_unit failed, " + "no sense available\n", + HP_SW_NAME); + return SCSI_DH_IO; + } + switch (sshdr.sense_key) { + case NOT_READY: + if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) { + /* + * LUN not ready - manual intervention required + * + * Switch-over in progress, retry. + */ + rc = SCSI_DH_RETRY; + break; + } + /* fall through */ + default: + sdev_printk(KERN_WARNING, sdev, + "%s: sending start_stop_unit failed, sense %x/%x/%x\n", + HP_SW_NAME, sshdr.sense_key, sshdr.asc, + sshdr.ascq); + rc = SCSI_DH_IO; + } + + return rc; +} + +static void start_stop_endio(struct request *req, int error) +{ + struct hp_sw_dh_data *h = req->end_io_data; + unsigned err = SCSI_DH_OK; + + if (error || host_byte(req->errors) != DID_OK || + msg_byte(req->errors) != COMMAND_COMPLETE) { + sdev_printk(KERN_WARNING, h->sdev, + "%s: sending start_stop_unit failed with %x\n", + HP_SW_NAME, req->errors); + err = SCSI_DH_IO; + goto done; + } + + if (req->sense_len > 0) { + err = start_done(h->sdev, h->sense); + if (err == SCSI_DH_RETRY) { + err = SCSI_DH_IO; + if (--h->retry_cnt) { + blk_put_request(req); + err = hp_sw_start_stop(h); + if (err == SCSI_DH_OK) + return; + } + } + } +done: + req->end_io_data = NULL; + __blk_put_request(req->q, req); + if (h->callback_fn) { + h->callback_fn(h->callback_data, err); + h->callback_fn = h->callback_data = NULL; + } + return; + +} + +/* + * hp_sw_start_stop - Send START STOP UNIT command + * @sdev: sdev command should be sent to + * + * Sending START STOP UNIT activates the SP. + */ +static int hp_sw_start_stop(struct hp_sw_dh_data *h) +{ + struct request *req; + + req = blk_get_request(h->sdev->request_queue, WRITE, GFP_ATOMIC); + if (IS_ERR(req)) + return SCSI_DH_RES_TEMP_UNAVAIL; + + blk_rq_set_block_pc(req); + req->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + req->cmd_len = COMMAND_SIZE(START_STOP); + req->cmd[0] = START_STOP; + req->cmd[4] = 1; /* Start spin cycle */ + req->timeout = HP_SW_TIMEOUT; + req->sense = h->sense; + memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); + req->sense_len = 0; + req->end_io_data = h; + + blk_execute_rq_nowait(req->q, NULL, req, 1, start_stop_endio); + return SCSI_DH_OK; +} + +static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + int ret = BLKPREP_OK; + + if (h->path_state != HP_SW_PATH_ACTIVE) { + ret = BLKPREP_KILL; + req->cmd_flags |= REQ_QUIET; + } + return ret; + +} + +/* + * hp_sw_activate - Activate a path + * @sdev: sdev on the path to be activated + * + * The HP Active/Passive firmware is pretty simple; + * the passive path reports NOT READY with sense codes + * 0x04/0x02; a START STOP UNIT command will then + * activate the passive path (and deactivate the + * previously active one). + */ +static int hp_sw_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + int ret = SCSI_DH_OK; + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + + ret = hp_sw_tur(sdev, h); + + if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) { + h->retry_cnt = h->retries; + h->callback_fn = fn; + h->callback_data = data; + ret = hp_sw_start_stop(h); + if (ret == SCSI_DH_OK) + return 0; + h->callback_fn = h->callback_data = NULL; + } + + if (fn) + fn(data, ret); + return 0; +} + +static const struct { + char *vendor; + char *model; +} hp_sw_dh_data_list[] = { + {"COMPAQ", "MSA1000 VOLUME"}, + {"COMPAQ", "HSV110"}, + {"HP", "HSV100"}, + {"DEC", "HSG80"}, + {NULL, NULL}, +}; + +static bool hp_sw_match(struct scsi_device *sdev) +{ + int i; + + if (scsi_device_tpgs(sdev)) + return false; + + for (i = 0; hp_sw_dh_data_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor, + strlen(hp_sw_dh_data_list[i].vendor)) && + !strncmp(sdev->model, hp_sw_dh_data_list[i].model, + strlen(hp_sw_dh_data_list[i].model))) { + return true; + } + } + return false; +} + +static struct scsi_dh_data *hp_sw_bus_attach(struct scsi_device *sdev) +{ + struct hp_sw_dh_data *h; + int ret; + + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + h->path_state = HP_SW_PATH_UNINITIALIZED; + h->retries = HP_SW_RETRIES; + h->sdev = sdev; + + ret = hp_sw_tur(sdev, h); + if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED) + goto failed; + + sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n", + HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE? + "active":"passive"); + return &h->dh_data; +failed: + kfree(h); + return ERR_PTR(-EINVAL); +} + +static void hp_sw_bus_detach( struct scsi_device *sdev ) +{ + struct hp_sw_dh_data *h = get_hp_sw_data(sdev); + + kfree(h); +} + +static struct scsi_device_handler hp_sw_dh = { + .name = HP_SW_NAME, + .module = THIS_MODULE, + .attach = hp_sw_bus_attach, + .detach = hp_sw_bus_detach, + .activate = hp_sw_activate, + .prep_fn = hp_sw_prep_fn, + .match = hp_sw_match, +}; + +static int __init hp_sw_init(void) +{ + return scsi_register_device_handler(&hp_sw_dh); +} + +static void __exit hp_sw_exit(void) +{ + scsi_unregister_device_handler(&hp_sw_dh); +} + +module_init(hp_sw_init); +module_exit(hp_sw_exit); + +MODULE_DESCRIPTION("HP Active/Passive driver"); +MODULE_AUTHOR("Mike Christie +#include +#include +#include +#include +#include + +#define RDAC_NAME "rdac" +#define RDAC_RETRY_COUNT 5 + +/* + * LSI mode page stuff + * + * These struct definitions and the forming of the + * mode page were taken from the LSI RDAC 2.4 GPL'd + * driver, and then converted to Linux conventions. + */ +#define RDAC_QUIESCENCE_TIME 20 +/* + * Page Codes + */ +#define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c + +/* + * Controller modes definitions + */ +#define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02 + +/* + * RDAC Options field + */ +#define RDAC_FORCED_QUIESENCE 0x02 + +#define RDAC_TIMEOUT (60 * HZ) +#define RDAC_RETRIES 3 + +struct rdac_mode_6_hdr { + u8 data_len; + u8 medium_type; + u8 device_params; + u8 block_desc_len; +}; + +struct rdac_mode_10_hdr { + u16 data_len; + u8 medium_type; + u8 device_params; + u16 reserved; + u16 block_desc_len; +}; + +struct rdac_mode_common { + u8 controller_serial[16]; + u8 alt_controller_serial[16]; + u8 rdac_mode[2]; + u8 alt_rdac_mode[2]; + u8 quiescence_timeout; + u8 rdac_options; +}; + +struct rdac_pg_legacy { + struct rdac_mode_6_hdr hdr; + u8 page_code; + u8 page_len; + struct rdac_mode_common common; +#define MODE6_MAX_LUN 32 + u8 lun_table[MODE6_MAX_LUN]; + u8 reserved2[32]; + u8 reserved3; + u8 reserved4; +}; + +struct rdac_pg_expanded { + struct rdac_mode_10_hdr hdr; + u8 page_code; + u8 subpage_code; + u8 page_len[2]; + struct rdac_mode_common common; + u8 lun_table[256]; + u8 reserved3; + u8 reserved4; +}; + +struct c9_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC9 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "vace" */ + u8 avte_cvp; + u8 path_prio; + u8 reserved2[38]; +}; + +#define SUBSYS_ID_LEN 16 +#define SLOT_ID_LEN 2 +#define ARRAY_LABEL_LEN 31 + +struct c4_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC4 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "subs" */ + u8 subsys_id[SUBSYS_ID_LEN]; + u8 revision[4]; + u8 slot_id[SLOT_ID_LEN]; + u8 reserved[2]; +}; + +#define UNIQUE_ID_LEN 16 +struct c8_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC8 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "edid" */ + u8 reserved2[3]; + u8 vol_uniq_id_len; + u8 vol_uniq_id[16]; + u8 vol_user_label_len; + u8 vol_user_label[60]; + u8 array_uniq_id_len; + u8 array_unique_id[UNIQUE_ID_LEN]; + u8 array_user_label_len; + u8 array_user_label[60]; + u8 lun[8]; +}; + +struct rdac_controller { + u8 array_id[UNIQUE_ID_LEN]; + int use_ms10; + struct kref kref; + struct list_head node; /* list of all controllers */ + union { + struct rdac_pg_legacy legacy; + struct rdac_pg_expanded expanded; + } mode_select; + u8 index; + u8 array_name[ARRAY_LABEL_LEN]; + struct Scsi_Host *host; + spinlock_t ms_lock; + int ms_queued; + struct work_struct ms_work; + struct scsi_device *ms_sdev; + struct list_head ms_head; +}; + +struct c2_inquiry { + u8 peripheral_info; + u8 page_code; /* 0xC2 */ + u8 reserved1; + u8 page_len; + u8 page_id[4]; /* "swr4" */ + u8 sw_version[3]; + u8 sw_date[3]; + u8 features_enabled; + u8 max_lun_supported; + u8 partitions[239]; /* Total allocation length should be 0xFF */ +}; + +struct rdac_dh_data { + struct scsi_dh_data dh_data; + struct rdac_controller *ctlr; +#define UNINITIALIZED_LUN (1 << 8) + unsigned lun; + +#define RDAC_MODE 0 +#define RDAC_MODE_AVT 1 +#define RDAC_MODE_IOSHIP 2 + unsigned char mode; + +#define RDAC_STATE_ACTIVE 0 +#define RDAC_STATE_PASSIVE 1 + unsigned char state; + +#define RDAC_LUN_UNOWNED 0 +#define RDAC_LUN_OWNED 1 + char lun_state; + +#define RDAC_PREFERRED 0 +#define RDAC_NON_PREFERRED 1 + char preferred; + + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + union { + struct c2_inquiry c2; + struct c4_inquiry c4; + struct c8_inquiry c8; + struct c9_inquiry c9; + } inq; +}; + +static const char *mode[] = { + "RDAC", + "AVT", + "IOSHIP", +}; +static const char *lun_state[] = +{ + "unowned", + "owned", +}; + +struct rdac_queue_data { + struct list_head entry; + struct rdac_dh_data *h; + activate_complete callback_fn; + void *callback_data; +}; + +static LIST_HEAD(ctlr_list); +static DEFINE_SPINLOCK(list_lock); +static struct workqueue_struct *kmpath_rdacd; +static void send_mode_select(struct work_struct *work); + +/* + * module parameter to enable rdac debug logging. + * 2 bits for each type of logging, only two types defined for now + * Can be enhanced if required at later point + */ +static int rdac_logging = 1; +module_param(rdac_logging, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(rdac_logging, "A bit mask of rdac logging levels, " + "Default is 1 - failover logging enabled, " + "set it to 0xF to enable all the logs"); + +#define RDAC_LOG_FAILOVER 0 +#define RDAC_LOG_SENSE 2 + +#define RDAC_LOG_BITS 2 + +#define RDAC_LOG_LEVEL(SHIFT) \ + ((rdac_logging >> (SHIFT)) & ((1 << (RDAC_LOG_BITS)) - 1)) + +#define RDAC_LOG(SHIFT, sdev, f, arg...) \ +do { \ + if (unlikely(RDAC_LOG_LEVEL(SHIFT))) \ + sdev_printk(KERN_INFO, sdev, RDAC_NAME ": " f "\n", ## arg); \ +} while (0); + +static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev) +{ + return container_of(sdev->scsi_dh_data, struct rdac_dh_data, dh_data); +} + +static struct request *get_rdac_req(struct scsi_device *sdev, + void *buffer, unsigned buflen, int rw) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + + rq = blk_get_request(q, rw, GFP_NOIO); + + if (IS_ERR(rq)) { + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_get_request failed.\n"); + return NULL; + } + blk_rq_set_block_pc(rq); + + if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) { + blk_put_request(rq); + sdev_printk(KERN_INFO, sdev, + "get_rdac_req: blk_rq_map_kern failed.\n"); + return NULL; + } + + rq->cmd_flags |= REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + rq->retries = RDAC_RETRIES; + rq->timeout = RDAC_TIMEOUT; + + return rq; +} + +static struct request *rdac_failover_get(struct scsi_device *sdev, + struct rdac_dh_data *h, struct list_head *list) +{ + struct request *rq; + struct rdac_mode_common *common; + unsigned data_size; + struct rdac_queue_data *qdata; + u8 *lun_table; + + if (h->ctlr->use_ms10) { + struct rdac_pg_expanded *rdac_pg; + + data_size = sizeof(struct rdac_pg_expanded); + rdac_pg = &h->ctlr->mode_select.expanded; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40; + rdac_pg->subpage_code = 0x1; + rdac_pg->page_len[0] = 0x01; + rdac_pg->page_len[1] = 0x28; + lun_table = rdac_pg->lun_table; + } else { + struct rdac_pg_legacy *rdac_pg; + + data_size = sizeof(struct rdac_pg_legacy); + rdac_pg = &h->ctlr->mode_select.legacy; + memset(rdac_pg, 0, data_size); + common = &rdac_pg->common; + rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER; + rdac_pg->page_len = 0x68; + lun_table = rdac_pg->lun_table; + } + common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS; + common->quiescence_timeout = RDAC_QUIESCENCE_TIME; + common->rdac_options = RDAC_FORCED_QUIESENCE; + + list_for_each_entry(qdata, list, entry) { + lun_table[qdata->h->lun] = 0x81; + } + + /* get request for block layer packet command */ + rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE); + if (!rq) + return NULL; + + /* Prepare the command. */ + if (h->ctlr->use_ms10) { + rq->cmd[0] = MODE_SELECT_10; + rq->cmd[7] = data_size >> 8; + rq->cmd[8] = data_size & 0xff; + } else { + rq->cmd[0] = MODE_SELECT; + rq->cmd[4] = data_size; + } + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]); + + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + return rq; +} + +static void release_controller(struct kref *kref) +{ + struct rdac_controller *ctlr; + ctlr = container_of(kref, struct rdac_controller, kref); + + list_del(&ctlr->node); + kfree(ctlr); +} + +static struct rdac_controller *get_controller(int index, char *array_name, + u8 *array_id, struct scsi_device *sdev) +{ + struct rdac_controller *ctlr, *tmp; + + list_for_each_entry(tmp, &ctlr_list, node) { + if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) && + (tmp->index == index) && + (tmp->host == sdev->host)) { + kref_get(&tmp->kref); + return tmp; + } + } + ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); + if (!ctlr) + return NULL; + + /* initialize fields of controller */ + memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN); + ctlr->index = index; + ctlr->host = sdev->host; + memcpy(ctlr->array_name, array_name, ARRAY_LABEL_LEN); + + kref_init(&ctlr->kref); + ctlr->use_ms10 = -1; + ctlr->ms_queued = 0; + ctlr->ms_sdev = NULL; + spin_lock_init(&ctlr->ms_lock); + INIT_WORK(&ctlr->ms_work, send_mode_select); + INIT_LIST_HEAD(&ctlr->ms_head); + list_add(&ctlr->node, &ctlr_list); + + return ctlr; +} + +static int submit_inquiry(struct scsi_device *sdev, int page_code, + unsigned int len, struct rdac_dh_data *h) +{ + struct request *rq; + struct request_queue *q = sdev->request_queue; + int err = SCSI_DH_RES_TEMP_UNAVAIL; + + rq = get_rdac_req(sdev, &h->inq, len, READ); + if (!rq) + goto done; + + /* Prepare the command. */ + rq->cmd[0] = INQUIRY; + rq->cmd[1] = 1; + rq->cmd[2] = page_code; + rq->cmd[4] = len; + rq->cmd_len = COMMAND_SIZE(INQUIRY); + + rq->sense = h->sense; + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE); + rq->sense_len = 0; + + err = blk_execute_rq(q, NULL, rq, 1); + if (err == -EIO) + err = SCSI_DH_IO; + + blk_put_request(rq); +done: + return err; +} + +static int get_lun_info(struct scsi_device *sdev, struct rdac_dh_data *h, + char *array_name, u8 *array_id) +{ + int err, i; + struct c8_inquiry *inqp; + + err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c8; + if (inqp->page_code != 0xc8) + return SCSI_DH_NOSYS; + if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' || + inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd') + return SCSI_DH_NOSYS; + h->lun = inqp->lun[7]; /* Uses only the last byte */ + + for(i=0; iarray_user_label[(2*i)+1]; + + *(array_name+ARRAY_LABEL_LEN-1) = '\0'; + memset(array_id, 0, UNIQUE_ID_LEN); + memcpy(array_id, inqp->array_unique_id, inqp->array_uniq_id_len); + } + return err; +} + +static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h) +{ + int err; + struct c9_inquiry *inqp; + + h->state = RDAC_STATE_ACTIVE; + err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c9; + /* detect the operating mode */ + if ((inqp->avte_cvp >> 5) & 0x1) + h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */ + else if (inqp->avte_cvp >> 7) + h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */ + else + h->mode = RDAC_MODE; /* LUN in RDAC mode */ + + /* Update ownership */ + if (inqp->avte_cvp & 0x1) + h->lun_state = RDAC_LUN_OWNED; + else { + h->lun_state = RDAC_LUN_UNOWNED; + if (h->mode == RDAC_MODE) + h->state = RDAC_STATE_PASSIVE; + } + + /* Update path prio*/ + if (inqp->path_prio & 0x1) + h->preferred = RDAC_PREFERRED; + else + h->preferred = RDAC_NON_PREFERRED; + } + + return err; +} + +static int initialize_controller(struct scsi_device *sdev, + struct rdac_dh_data *h, char *array_name, u8 *array_id) +{ + int err, index; + struct c4_inquiry *inqp; + + err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c4; + /* get the controller index */ + if (inqp->slot_id[1] == 0x31) + index = 0; + else + index = 1; + + spin_lock(&list_lock); + h->ctlr = get_controller(index, array_name, array_id, sdev); + if (!h->ctlr) + err = SCSI_DH_RES_TEMP_UNAVAIL; + spin_unlock(&list_lock); + } + return err; +} + +static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h) +{ + int err; + struct c2_inquiry *inqp; + + err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h); + if (err == SCSI_DH_OK) { + inqp = &h->inq.c2; + /* + * If more than MODE6_MAX_LUN luns are supported, use + * mode select 10 + */ + if (inqp->max_lun_supported >= MODE6_MAX_LUN) + h->ctlr->use_ms10 = 1; + else + h->ctlr->use_ms10 = 0; + } + return err; +} + +static int mode_select_handle_sense(struct scsi_device *sdev, + unsigned char *sensebuf) +{ + struct scsi_sense_hdr sense_hdr; + int err = SCSI_DH_IO, ret; + struct rdac_dh_data *h = get_rdac_data(sdev); + + ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr); + if (!ret) + goto done; + + switch (sense_hdr.sense_key) { + case NO_SENSE: + case ABORTED_COMMAND: + case UNIT_ATTENTION: + err = SCSI_DH_RETRY; + break; + case NOT_READY: + if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01) + /* LUN Not Ready and is in the Process of Becoming + * Ready + */ + err = SCSI_DH_RETRY; + break; + case ILLEGAL_REQUEST: + if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36) + /* + * Command Lock contention + */ + err = SCSI_DH_RETRY; + break; + default: + break; + } + + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " + "MODE_SELECT returned with sense %02x/%02x/%02x", + (char *) h->ctlr->array_name, h->ctlr->index, + sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq); + +done: + return err; +} + +static void send_mode_select(struct work_struct *work) +{ + struct rdac_controller *ctlr = + container_of(work, struct rdac_controller, ms_work); + struct request *rq; + struct scsi_device *sdev = ctlr->ms_sdev; + struct rdac_dh_data *h = get_rdac_data(sdev); + struct request_queue *q = sdev->request_queue; + int err, retry_cnt = RDAC_RETRY_COUNT; + struct rdac_queue_data *tmp, *qdata; + LIST_HEAD(list); + + spin_lock(&ctlr->ms_lock); + list_splice_init(&ctlr->ms_head, &list); + ctlr->ms_queued = 0; + ctlr->ms_sdev = NULL; + spin_unlock(&ctlr->ms_lock); + +retry: + err = SCSI_DH_RES_TEMP_UNAVAIL; + rq = rdac_failover_get(sdev, h, &list); + if (!rq) + goto done; + + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " + "%s MODE_SELECT command", + (char *) h->ctlr->array_name, h->ctlr->index, + (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying"); + + err = blk_execute_rq(q, NULL, rq, 1); + blk_put_request(rq); + if (err != SCSI_DH_OK) { + err = mode_select_handle_sense(sdev, h->sense); + if (err == SCSI_DH_RETRY && retry_cnt--) + goto retry; + } + if (err == SCSI_DH_OK) { + h->state = RDAC_STATE_ACTIVE; + RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, " + "MODE_SELECT completed", + (char *) h->ctlr->array_name, h->ctlr->index); + } + +done: + list_for_each_entry_safe(qdata, tmp, &list, entry) { + list_del(&qdata->entry); + if (err == SCSI_DH_OK) + qdata->h->state = RDAC_STATE_ACTIVE; + if (qdata->callback_fn) + qdata->callback_fn(qdata->callback_data, err); + kfree(qdata); + } + return; +} + +static int queue_mode_select(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct rdac_queue_data *qdata; + struct rdac_controller *ctlr; + + qdata = kzalloc(sizeof(*qdata), GFP_KERNEL); + if (!qdata) + return SCSI_DH_RETRY; + + qdata->h = get_rdac_data(sdev); + qdata->callback_fn = fn; + qdata->callback_data = data; + + ctlr = qdata->h->ctlr; + spin_lock(&ctlr->ms_lock); + list_add_tail(&qdata->entry, &ctlr->ms_head); + if (!ctlr->ms_queued) { + ctlr->ms_queued = 1; + ctlr->ms_sdev = sdev; + queue_work(kmpath_rdacd, &ctlr->ms_work); + } + spin_unlock(&ctlr->ms_lock); + return SCSI_DH_OK; +} + +static int rdac_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + int err = SCSI_DH_OK; + int act = 0; + + err = check_ownership(sdev, h); + if (err != SCSI_DH_OK) + goto done; + + switch (h->mode) { + case RDAC_MODE: + if (h->lun_state == RDAC_LUN_UNOWNED) + act = 1; + break; + case RDAC_MODE_IOSHIP: + if ((h->lun_state == RDAC_LUN_UNOWNED) && + (h->preferred == RDAC_PREFERRED)) + act = 1; + break; + default: + break; + } + + if (act) { + err = queue_mode_select(sdev, fn, data); + if (err == SCSI_DH_OK) + return 0; + } +done: + if (fn) + fn(data, err); + return 0; +} + +static int rdac_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + int ret = BLKPREP_OK; + + if (h->state != RDAC_STATE_ACTIVE) { + ret = BLKPREP_KILL; + req->cmd_flags |= REQ_QUIET; + } + return ret; + +} + +static int rdac_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + + RDAC_LOG(RDAC_LOG_SENSE, sdev, "array %s, ctlr %d, " + "I/O returned with sense %02x/%02x/%02x", + (char *) h->ctlr->array_name, h->ctlr->index, + sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq); + + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01) + /* LUN Not Ready - Logical Unit Not Ready and is in + * the process of becoming ready + * Just retry. + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81) + /* LUN Not Ready - Storage firmware incompatible + * Manual code synchonisation required. + * + * Nothing we can do here. Try to bypass the path. + */ + return SUCCESS; + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1) + /* LUN Not Ready - Quiescense in progress + * + * Just retry and wait. + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02) + /* LUN Not Ready - Quiescense in progress + * or has been achieved + * Just retry. + */ + return ADD_TO_MLQUEUE; + break; + case ILLEGAL_REQUEST: + if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { + /* Invalid Request - Current Logical Unit Ownership. + * Controller is not the current owner of the LUN, + * Fail the path, so that the other path be used. + */ + h->state = RDAC_STATE_PASSIVE; + return SUCCESS; + } + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) + /* + * Power On, Reset, or Bus Device Reset, just retry. + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02) + /* + * Quiescence in progress , just retry. + */ + return ADD_TO_MLQUEUE; + break; + } + /* success just means we do not care what scsi-ml does */ + return SCSI_RETURN_NOT_HANDLED; +} + +static const struct { + char *vendor; + char *model; +} rdac_dev_list[] = { + {"IBM", "1722"}, + {"IBM", "1724"}, + {"IBM", "1726"}, + {"IBM", "1742"}, + {"IBM", "1745"}, + {"IBM", "1746"}, + {"IBM", "1813"}, + {"IBM", "1814"}, + {"IBM", "1815"}, + {"IBM", "1818"}, + {"IBM", "3526"}, + {"SGI", "TP9"}, + {"SGI", "IS"}, + {"STK", "OPENstorage D280"}, + {"STK", "FLEXLINE 380"}, + {"SUN", "CSM"}, + {"SUN", "LCSM100"}, + {"SUN", "STK6580_6780"}, + {"SUN", "SUN_6180"}, + {"SUN", "ArrayStorage"}, + {"DELL", "MD3"}, + {"NETAPP", "INF-01-00"}, + {"LSI", "INF-01-00"}, + {"ENGENIO", "INF-01-00"}, + {NULL, NULL}, +}; + +static bool rdac_match(struct scsi_device *sdev) +{ + int i; + + if (scsi_device_tpgs(sdev)) + return false; + + for (i = 0; rdac_dev_list[i].vendor; i++) { + if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor, + strlen(rdac_dev_list[i].vendor)) && + !strncmp(sdev->model, rdac_dev_list[i].model, + strlen(rdac_dev_list[i].model))) { + return true; + } + } + return false; +} + +static struct scsi_dh_data *rdac_bus_attach(struct scsi_device *sdev) +{ + struct rdac_dh_data *h; + int err; + char array_name[ARRAY_LABEL_LEN]; + char array_id[UNIQUE_ID_LEN]; + + h = kzalloc(sizeof(*h) , GFP_KERNEL); + if (!h) + return ERR_PTR(-ENOMEM); + h->lun = UNINITIALIZED_LUN; + h->state = RDAC_STATE_ACTIVE; + + err = get_lun_info(sdev, h, array_name, array_id); + if (err != SCSI_DH_OK) + goto failed; + + err = initialize_controller(sdev, h, array_name, array_id); + if (err != SCSI_DH_OK) + goto failed; + + err = check_ownership(sdev, h); + if (err != SCSI_DH_OK) + goto clean_ctlr; + + err = set_mode_select(sdev, h); + if (err != SCSI_DH_OK) + goto clean_ctlr; + + sdev_printk(KERN_NOTICE, sdev, + "%s: LUN %d (%s) (%s)\n", + RDAC_NAME, h->lun, mode[(int)h->mode], + lun_state[(int)h->lun_state]); + + return &h->dh_data; + +clean_ctlr: + spin_lock(&list_lock); + kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); + +failed: + kfree(h); + return ERR_PTR(-EINVAL); +} + +static void rdac_bus_detach( struct scsi_device *sdev ) +{ + struct rdac_dh_data *h = get_rdac_data(sdev); + + if (h->ctlr && h->ctlr->ms_queued) + flush_workqueue(kmpath_rdacd); + + spin_lock(&list_lock); + if (h->ctlr) + kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); + kfree(h); +} + +static struct scsi_device_handler rdac_dh = { + .name = RDAC_NAME, + .module = THIS_MODULE, + .prep_fn = rdac_prep_fn, + .check_sense = rdac_check_sense, + .attach = rdac_bus_attach, + .detach = rdac_bus_detach, + .activate = rdac_activate, + .match = rdac_match, +}; + +static int __init rdac_init(void) +{ + int r; + + r = scsi_register_device_handler(&rdac_dh); + if (r != 0) { + printk(KERN_ERR "Failed to register scsi device handler."); + goto done; + } + + /* + * Create workqueue to handle mode selects for rdac + */ + kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd"); + if (!kmpath_rdacd) { + scsi_unregister_device_handler(&rdac_dh); + printk(KERN_ERR "kmpath_rdacd creation failed.\n"); + + r = -EINVAL; + } +done: + return r; +} + +static void __exit rdac_exit(void) +{ + destroy_workqueue(kmpath_rdacd); + scsi_unregister_device_handler(&rdac_dh); +} + +module_init(rdac_init); +module_exit(rdac_exit); + +MODULE_DESCRIPTION("Multipath LSI/Engenio/NetApp E-Series RDAC driver"); +MODULE_AUTHOR("Mike Christie, Chandra Seetharaman"); +MODULE_VERSION("01.00.0000.0000"); +MODULE_LICENSE("GPL"); -- cgit 1.2.3-korg