From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/phy/phy-sun4i-usb.c | 338 +++++++++++++++++++++++++++++++++++++ 1 file changed, 338 insertions(+) create mode 100644 kernel/drivers/phy/phy-sun4i-usb.c (limited to 'kernel/drivers/phy/phy-sun4i-usb.c') diff --git a/kernel/drivers/phy/phy-sun4i-usb.c b/kernel/drivers/phy/phy-sun4i-usb.c new file mode 100644 index 000000000..a2b08f3cc --- /dev/null +++ b/kernel/drivers/phy/phy-sun4i-usb.c @@ -0,0 +1,338 @@ +/* + * Allwinner sun4i USB phy driver + * + * Copyright (C) 2014 Hans de Goede + * + * Based on code from + * Allwinner Technology Co., Ltd. + * + * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_ISCR 0x00 +#define REG_PHYCTL 0x04 +#define REG_PHYBIST 0x08 +#define REG_PHYTUNE 0x0c + +#define PHYCTL_DATA BIT(7) + +#define SUNXI_AHB_ICHR8_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* Common Control Bits for Both PHYs */ +#define PHY_PLL_BW 0x03 +#define PHY_RES45_CAL_EN 0x0c + +/* Private Control Bits for Each PHY */ +#define PHY_TX_AMPLITUDE_TUNE 0x20 +#define PHY_TX_SLEWRATE_TUNE 0x22 +#define PHY_VBUSVALID_TH_SEL 0x25 +#define PHY_PULLUP_RES_SEL 0x27 +#define PHY_OTG_FUNC_EN 0x28 +#define PHY_VBUS_DET_EN 0x29 +#define PHY_DISCON_TH_SEL 0x2a + +#define MAX_PHYS 3 + +struct sun4i_usb_phy_data { + void __iomem *base; + struct mutex mutex; + int num_phys; + u32 disc_thresh; + struct sun4i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct regulator *vbus; + struct reset_control *reset; + struct clk *clk; + int index; + } phys[MAX_PHYS]; +}; + +#define to_sun4i_usb_phy_data(phy) \ + container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) + +static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, + int len) +{ + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); + u32 temp, usbc_bit = BIT(phy->index * 2); + int i; + + mutex_lock(&phy_data->mutex); + + for (i = 0; i < len; i++) { + temp = readl(phy_data->base + REG_PHYCTL); + + /* clear the address portion */ + temp &= ~(0xff << 8); + + /* set the address */ + temp |= ((addr + i) << 8); + writel(temp, phy_data->base + REG_PHYCTL); + + /* set the data bit and clear usbc bit*/ + temp = readb(phy_data->base + REG_PHYCTL); + if (data & 0x1) + temp |= PHYCTL_DATA; + else + temp &= ~PHYCTL_DATA; + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + /* pulse usbc_bit */ + temp = readb(phy_data->base + REG_PHYCTL); + temp |= usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + temp = readb(phy_data->base + REG_PHYCTL); + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + data >>= 1; + } + mutex_unlock(&phy_data->mutex); +} + +static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) +{ + u32 bits, reg_value; + + if (!phy->pmu) + return; + + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun4i_usb_phy_init(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int ret; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + ret = reset_control_deassert(phy->reset); + if (ret) { + clk_disable_unprepare(phy->clk); + return ret; + } + + /* Enable USB 45 Ohm resistor calibration */ + if (phy->index == 0) + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); + + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); + + sun4i_usb_phy_passby(phy, 1); + + return 0; +} + +static int sun4i_usb_phy_exit(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + sun4i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static int sun4i_usb_phy_power_on(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + if (phy->vbus) + ret = regulator_enable(phy->vbus); + + return ret; +} + +static int sun4i_usb_phy_power_off(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->vbus) + regulator_disable(phy->vbus); + + return 0; +} + +static struct phy_ops sun4i_usb_phy_ops = { + .init = sun4i_usb_phy_init, + .exit = sun4i_usb_phy_exit, + .power_on = sun4i_usb_phy_power_on, + .power_off = sun4i_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *sun4i_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + + if (args->args[0] >= data->num_phys) + return ERR_PTR(-ENODEV); + + return data->phys[args->args[0]].phy; +} + +static int sun4i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun4i_usb_phy_data *data; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + bool dedicated_clocks; + struct resource *res; + int i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + mutex_init(&data->mutex); + + if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) + data->num_phys = 2; + else + data->num_phys = 3; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy") || + of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + data->disc_thresh = 3; + else + data->disc_thresh = 2; + + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + dedicated_clocks = true; + else + dedicated_clocks = false; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); + data->base = devm_ioremap_resource(dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + for (i = 0; i < data->num_phys; i++) { + struct sun4i_usb_phy *phy = data->phys + i; + char name[16]; + + snprintf(name, sizeof(name), "usb%d_vbus", i); + phy->vbus = devm_regulator_get_optional(dev, name); + if (IS_ERR(phy->vbus)) { + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) + return -EPROBE_DEFER; + phy->vbus = NULL; + } + + if (dedicated_clocks) + snprintf(name, sizeof(name), "usb%d_phy", i); + else + strlcpy(name, "usb_phy", sizeof(name)); + + phy->clk = devm_clk_get(dev, name); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk); + } + + snprintf(name, sizeof(name), "usb%d_reset", i); + phy->reset = devm_reset_control_get(dev, name); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset %s\n", name); + return PTR_ERR(phy->reset); + } + + if (i) { /* No pmu for usbc0 */ + snprintf(name, sizeof(name), "pmu%d", i); + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, name); + phy->pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); + } + + phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy->phy); + } + + phy->index = i; + phy_set_drvdata(phy->phy, &data->phys[i]); + } + + dev_set_drvdata(dev, data); + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id sun4i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun4i-a10-usb-phy" }, + { .compatible = "allwinner,sun5i-a13-usb-phy" }, + { .compatible = "allwinner,sun6i-a31-usb-phy" }, + { .compatible = "allwinner,sun7i-a20-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); + +static struct platform_driver sun4i_usb_phy_driver = { + .probe = sun4i_usb_phy_probe, + .driver = { + .of_match_table = sun4i_usb_phy_of_match, + .name = "sun4i-usb-phy", + } +}; +module_platform_driver(sun4i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); -- cgit 1.2.3-korg