From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001
From: José Pekkarinen <jose.pekkarinen@nokia.com>
Date: Mon, 11 Apr 2016 10:41:07 +0300
Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources
 are taken from kernel.org, and rt patch from the rt wiki download page.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
---
 .../drivers/net/wireless/rtl818x/rtl8187/Makefile  |    5 -
 kernel/drivers/net/wireless/rtl818x/rtl8187/dev.c  | 1684 --------------------
 kernel/drivers/net/wireless/rtl818x/rtl8187/leds.c |  245 ---
 kernel/drivers/net/wireless/rtl818x/rtl8187/leds.h |   59 -
 .../drivers/net/wireless/rtl818x/rtl8187/rfkill.c  |   64 -
 .../drivers/net/wireless/rtl818x/rtl8187/rfkill.h  |    8 -
 .../drivers/net/wireless/rtl818x/rtl8187/rtl8187.h |  288 ----
 .../drivers/net/wireless/rtl818x/rtl8187/rtl8225.c |  961 -----------
 .../drivers/net/wireless/rtl818x/rtl8187/rtl8225.h |   44 -
 9 files changed, 3358 deletions(-)
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/Makefile
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/dev.c
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/leds.c
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/leds.h
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.h
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
 delete mode 100644 kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h

(limited to 'kernel/drivers/net/wireless/rtl818x/rtl8187')

diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/Makefile b/kernel/drivers/net/wireless/rtl818x/rtl8187/Makefile
deleted file mode 100644
index 7b6299268..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-rtl8187-objs		:= dev.o rtl8225.o leds.o rfkill.o
-
-obj-$(CONFIG_RTL8187)	+= rtl8187.o
-
-ccflags-y += -Idrivers/net/wireless/rtl818x
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/dev.c b/kernel/drivers/net/wireless/rtl818x/rtl8187/dev.c
deleted file mode 100644
index 629ad8cfa..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ /dev/null
@@ -1,1684 +0,0 @@
-/*
- * Linux device driver for RTL8187
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * The driver was extended to the RTL8187B in 2008 by:
- *	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *	Hin-Tak Leung <htl10@users.sourceforge.net>
- *	Larry Finger <Larry.Finger@lwfinger.net>
- *
- * Magic delays and register offsets below are taken from the original
- * r8187 driver sources.  Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/eeprom_93cx6.h>
-#include <linux/module.h>
-#include <net/mac80211.h>
-
-#include "rtl8187.h"
-#include "rtl8225.h"
-#ifdef CONFIG_RTL8187_LEDS
-#include "leds.h"
-#endif
-#include "rfkill.h"
-
-MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
-MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
-MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
-MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
-MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
-MODULE_LICENSE("GPL");
-
-static struct usb_device_id rtl8187_table[] = {
-	/* Asus */
-	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
-	/* Belkin */
-	{USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
-	/* Realtek */
-	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
-	/* Surecom */
-	{USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
-	/* Logitech */
-	{USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
-	/* Netgear */
-	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
-	/* HP */
-	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
-	/* Sitecom */
-	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
-	/* Sphairon Access Systems GmbH */
-	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
-	/* Dick Smith Electronics */
-	{USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
-	/* Abocom */
-	{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
-	/* Qcom */
-	{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
-	/* AirLive */
-	{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
-	/* Linksys */
-	{USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, rtl8187_table);
-
-static const struct ieee80211_rate rtl818x_rates[] = {
-	{ .bitrate = 10, .hw_value = 0, },
-	{ .bitrate = 20, .hw_value = 1, },
-	{ .bitrate = 55, .hw_value = 2, },
-	{ .bitrate = 110, .hw_value = 3, },
-	{ .bitrate = 60, .hw_value = 4, },
-	{ .bitrate = 90, .hw_value = 5, },
-	{ .bitrate = 120, .hw_value = 6, },
-	{ .bitrate = 180, .hw_value = 7, },
-	{ .bitrate = 240, .hw_value = 8, },
-	{ .bitrate = 360, .hw_value = 9, },
-	{ .bitrate = 480, .hw_value = 10, },
-	{ .bitrate = 540, .hw_value = 11, },
-};
-
-static const struct ieee80211_channel rtl818x_channels[] = {
-	{ .center_freq = 2412 },
-	{ .center_freq = 2417 },
-	{ .center_freq = 2422 },
-	{ .center_freq = 2427 },
-	{ .center_freq = 2432 },
-	{ .center_freq = 2437 },
-	{ .center_freq = 2442 },
-	{ .center_freq = 2447 },
-	{ .center_freq = 2452 },
-	{ .center_freq = 2457 },
-	{ .center_freq = 2462 },
-	{ .center_freq = 2467 },
-	{ .center_freq = 2472 },
-	{ .center_freq = 2484 },
-};
-
-static void rtl8187_iowrite_async_cb(struct urb *urb)
-{
-	kfree(urb->context);
-}
-
-static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
-				  void *data, u16 len)
-{
-	struct usb_ctrlrequest *dr;
-	struct urb *urb;
-	struct rtl8187_async_write_data {
-		u8 data[4];
-		struct usb_ctrlrequest dr;
-	} *buf;
-	int rc;
-
-	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
-	if (!buf)
-		return;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		kfree(buf);
-		return;
-	}
-
-	dr = &buf->dr;
-
-	dr->bRequestType = RTL8187_REQT_WRITE;
-	dr->bRequest = RTL8187_REQ_SET_REG;
-	dr->wValue = addr;
-	dr->wIndex = 0;
-	dr->wLength = cpu_to_le16(len);
-
-	memcpy(buf, data, len);
-
-	usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			     (unsigned char *)dr, buf, len,
-			     rtl8187_iowrite_async_cb, buf);
-	usb_anchor_urb(urb, &priv->anchored);
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (rc < 0) {
-		kfree(buf);
-		usb_unanchor_urb(urb);
-	}
-	usb_free_urb(urb);
-}
-
-static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
-					   __le32 *addr, u32 val)
-{
-	__le32 buf = cpu_to_le32(val);
-
-	rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
-			      &buf, sizeof(buf));
-}
-
-void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	data <<= 8;
-	data |= addr | 0x80;
-
-	rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
-}
-
-static void rtl8187_tx_cb(struct urb *urb)
-{
-	struct sk_buff *skb = (struct sk_buff *)urb->context;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hw *hw = info->rate_driver_data[0];
-	struct rtl8187_priv *priv = hw->priv;
-
-	skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
-					  sizeof(struct rtl8187_tx_hdr));
-	ieee80211_tx_info_clear_status(info);
-
-	if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		if (priv->is_rtl8187b) {
-			skb_queue_tail(&priv->b_tx_status.queue, skb);
-
-			/* queue is "full", discard last items */
-			while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
-				struct sk_buff *old_skb;
-
-				dev_dbg(&priv->udev->dev,
-					"transmit status queue full\n");
-
-				old_skb = skb_dequeue(&priv->b_tx_status.queue);
-				ieee80211_tx_status_irqsafe(hw, old_skb);
-			}
-			return;
-		} else {
-			info->flags |= IEEE80211_TX_STAT_ACK;
-		}
-	}
-	if (priv->is_rtl8187b)
-		ieee80211_tx_status_irqsafe(hw, skb);
-	else {
-		/* Retry information for the RTI8187 is only available by
-		 * reading a register in the device. We are in interrupt mode
-		 * here, thus queue the skb and finish on a work queue. */
-		skb_queue_tail(&priv->b_tx_status.queue, skb);
-		ieee80211_queue_delayed_work(hw, &priv->work, 0);
-	}
-}
-
-static void rtl8187_tx(struct ieee80211_hw *dev,
-		       struct ieee80211_tx_control *control,
-		       struct sk_buff *skb)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *tx_hdr =	(struct ieee80211_hdr *)(skb->data);
-	unsigned int ep;
-	void *buf;
-	struct urb *urb;
-	__le16 rts_dur = 0;
-	u32 flags;
-	int rc;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		kfree_skb(skb);
-		return;
-	}
-
-	flags = skb->len;
-	flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
-
-	flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
-	if (ieee80211_has_morefrags(tx_hdr->frame_control))
-		flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
-
-	/* HW will perform RTS-CTS when only RTS flags is set.
-	 * HW will perform CTS-to-self when both RTS and CTS flags are set.
-	 * RTS rate and RTS duration will be used also for CTS-to-self.
-	 */
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		flags |= RTL818X_TX_DESC_FLAG_RTS;
-		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-		rts_dur = ieee80211_rts_duration(dev, priv->vif,
-						 skb->len, info);
-	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS;
-		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-		rts_dur = ieee80211_ctstoself_duration(dev, priv->vif,
-						 skb->len, info);
-	}
-
-	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			priv->seqno += 0x10;
-		tx_hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		tx_hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
-	}
-
-	if (!priv->is_rtl8187b) {
-		struct rtl8187_tx_hdr *hdr =
-			(struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
-		hdr->flags = cpu_to_le32(flags);
-		hdr->len = 0;
-		hdr->rts_duration = rts_dur;
-		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
-		buf = hdr;
-
-		ep = 2;
-	} else {
-		/* fc needs to be calculated before skb_push() */
-		unsigned int epmap[4] = { 6, 7, 5, 4 };
-		u16 fc = le16_to_cpu(tx_hdr->frame_control);
-
-		struct rtl8187b_tx_hdr *hdr =
-			(struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
-		struct ieee80211_rate *txrate =
-			ieee80211_get_tx_rate(dev, info);
-		memset(hdr, 0, sizeof(*hdr));
-		hdr->flags = cpu_to_le32(flags);
-		hdr->rts_duration = rts_dur;
-		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
-		hdr->tx_duration =
-			ieee80211_generic_frame_duration(dev, priv->vif,
-							 info->band,
-							 skb->len, txrate);
-		buf = hdr;
-
-		if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
-			ep = 12;
-		else
-			ep = epmap[skb_get_queue_mapping(skb)];
-	}
-
-	info->rate_driver_data[0] = dev;
-	info->rate_driver_data[1] = urb;
-
-	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
-			  buf, skb->len, rtl8187_tx_cb, skb);
-	urb->transfer_flags |= URB_ZERO_PACKET;
-	usb_anchor_urb(urb, &priv->anchored);
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (rc < 0) {
-		usb_unanchor_urb(urb);
-		kfree_skb(skb);
-	}
-	usb_free_urb(urb);
-}
-
-static void rtl8187_rx_cb(struct urb *urb)
-{
-	struct sk_buff *skb = (struct sk_buff *)urb->context;
-	struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
-	struct ieee80211_hw *dev = info->dev;
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_rx_status rx_status = { 0 };
-	int rate, signal;
-	u32 flags;
-	unsigned long f;
-
-	spin_lock_irqsave(&priv->rx_queue.lock, f);
-	__skb_unlink(skb, &priv->rx_queue);
-	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
-	skb_put(skb, urb->actual_length);
-
-	if (unlikely(urb->status)) {
-		dev_kfree_skb_irq(skb);
-		return;
-	}
-
-	if (!priv->is_rtl8187b) {
-		struct rtl8187_rx_hdr *hdr =
-			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
-		flags = le32_to_cpu(hdr->flags);
-		/* As with the RTL8187B below, the AGC is used to calculate
-		 * signal strength. In this case, the scaling
-		 * constants are derived from the output of p54usb.
-		 */
-		signal = -4 - ((27 * hdr->agc) >> 6);
-		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-	} else {
-		struct rtl8187b_rx_hdr *hdr =
-			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
-		/* The Realtek datasheet for the RTL8187B shows that the RX
-		 * header contains the following quantities: signal quality,
-		 * RSSI, AGC, the received power in dB, and the measured SNR.
-		 * In testing, none of these quantities show qualitative
-		 * agreement with AP signal strength, except for the AGC,
-		 * which is inversely proportional to the strength of the
-		 * signal. In the following, the signal strength
-		 * is derived from the AGC. The arbitrary scaling constants
-		 * are chosen to make the results close to the values obtained
-		 * for a BCM4312 using b43 as the driver. The noise is ignored
-		 * for now.
-		 */
-		flags = le32_to_cpu(hdr->flags);
-		signal = 14 - hdr->agc / 2;
-		rx_status.antenna = (hdr->rssi >> 7) & 1;
-		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-	}
-
-	rx_status.signal = signal;
-	priv->signal = signal;
-	rate = (flags >> 20) & 0xF;
-	skb_trim(skb, flags & 0x0FFF);
-	rx_status.rate_idx = rate;
-	rx_status.freq = dev->conf.chandef.chan->center_freq;
-	rx_status.band = dev->conf.chandef.chan->band;
-	rx_status.flag |= RX_FLAG_MACTIME_START;
-	if (flags & RTL818X_RX_DESC_FLAG_SPLCP)
-		rx_status.flag |= RX_FLAG_SHORTPRE;
-	if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
-		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
-	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-	ieee80211_rx_irqsafe(dev, skb);
-
-	skb = dev_alloc_skb(RTL8187_MAX_RX);
-	if (unlikely(!skb)) {
-		/* TODO check rx queue length and refill *somewhere* */
-		return;
-	}
-
-	info = (struct rtl8187_rx_info *)skb->cb;
-	info->urb = urb;
-	info->dev = dev;
-	urb->transfer_buffer = skb_tail_pointer(skb);
-	urb->context = skb;
-	skb_queue_tail(&priv->rx_queue, skb);
-
-	usb_anchor_urb(urb, &priv->anchored);
-	if (usb_submit_urb(urb, GFP_ATOMIC)) {
-		usb_unanchor_urb(urb);
-		skb_unlink(skb, &priv->rx_queue);
-		dev_kfree_skb_irq(skb);
-	}
-}
-
-static int rtl8187_init_urbs(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct urb *entry = NULL;
-	struct sk_buff *skb;
-	struct rtl8187_rx_info *info;
-	int ret = 0;
-
-	while (skb_queue_len(&priv->rx_queue) < 32) {
-		skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
-		if (!skb) {
-			ret = -ENOMEM;
-			goto err;
-		}
-		entry = usb_alloc_urb(0, GFP_KERNEL);
-		if (!entry) {
-			ret = -ENOMEM;
-			goto err;
-		}
-		usb_fill_bulk_urb(entry, priv->udev,
-				  usb_rcvbulkpipe(priv->udev,
-				  priv->is_rtl8187b ? 3 : 1),
-				  skb_tail_pointer(skb),
-				  RTL8187_MAX_RX, rtl8187_rx_cb, skb);
-		info = (struct rtl8187_rx_info *)skb->cb;
-		info->urb = entry;
-		info->dev = dev;
-		skb_queue_tail(&priv->rx_queue, skb);
-		usb_anchor_urb(entry, &priv->anchored);
-		ret = usb_submit_urb(entry, GFP_KERNEL);
-		usb_put_urb(entry);
-		if (ret) {
-			skb_unlink(skb, &priv->rx_queue);
-			usb_unanchor_urb(entry);
-			goto err;
-		}
-	}
-	return ret;
-
-err:
-	kfree_skb(skb);
-	usb_kill_anchored_urbs(&priv->anchored);
-	return ret;
-}
-
-static void rtl8187b_status_cb(struct urb *urb)
-{
-	struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
-	struct rtl8187_priv *priv = hw->priv;
-	u64 val;
-	unsigned int cmd_type;
-
-	if (unlikely(urb->status))
-		return;
-
-	/*
-	 * Read from status buffer:
-	 *
-	 * bits [30:31] = cmd type:
-	 * - 0 indicates tx beacon interrupt
-	 * - 1 indicates tx close descriptor
-	 *
-	 * In the case of tx beacon interrupt:
-	 * [0:9] = Last Beacon CW
-	 * [10:29] = reserved
-	 * [30:31] = 00b
-	 * [32:63] = Last Beacon TSF
-	 *
-	 * If it's tx close descriptor:
-	 * [0:7] = Packet Retry Count
-	 * [8:14] = RTS Retry Count
-	 * [15] = TOK
-	 * [16:27] = Sequence No
-	 * [28] = LS
-	 * [29] = FS
-	 * [30:31] = 01b
-	 * [32:47] = unused (reserved?)
-	 * [48:63] = MAC Used Time
-	 */
-	val = le64_to_cpu(priv->b_tx_status.buf);
-
-	cmd_type = (val >> 30) & 0x3;
-	if (cmd_type == 1) {
-		unsigned int pkt_rc, seq_no;
-		bool tok;
-		struct sk_buff *skb;
-		struct ieee80211_hdr *ieee80211hdr;
-		unsigned long flags;
-
-		pkt_rc = val & 0xFF;
-		tok = val & (1 << 15);
-		seq_no = (val >> 16) & 0xFFF;
-
-		spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
-		skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
-			ieee80211hdr = (struct ieee80211_hdr *)skb->data;
-
-			/*
-			 * While testing, it was discovered that the seq_no
-			 * doesn't actually contains the sequence number.
-			 * Instead of returning just the 12 bits of sequence
-			 * number, hardware is returning entire sequence control
-			 * (fragment number plus sequence number) in a 12 bit
-			 * only field overflowing after some time. As a
-			 * workaround, just consider the lower bits, and expect
-			 * it's unlikely we wrongly ack some sent data
-			 */
-			if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
-			    & 0xFFF) == seq_no)
-				break;
-		}
-		if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
-			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-			__skb_unlink(skb, &priv->b_tx_status.queue);
-			if (tok)
-				info->flags |= IEEE80211_TX_STAT_ACK;
-			info->status.rates[0].count = pkt_rc + 1;
-
-			ieee80211_tx_status_irqsafe(hw, skb);
-		}
-		spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
-	}
-
-	usb_anchor_urb(urb, &priv->anchored);
-	if (usb_submit_urb(urb, GFP_ATOMIC))
-		usb_unanchor_urb(urb);
-}
-
-static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct urb *entry;
-	int ret = 0;
-
-	entry = usb_alloc_urb(0, GFP_KERNEL);
-	if (!entry)
-		return -ENOMEM;
-
-	usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
-			  &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
-			  rtl8187b_status_cb, dev);
-
-	usb_anchor_urb(entry, &priv->anchored);
-	ret = usb_submit_urb(entry, GFP_KERNEL);
-	if (ret)
-		usb_unanchor_urb(entry);
-	usb_free_urb(entry);
-
-	return ret;
-}
-
-static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
-{
-	u32 anaparam, anaparam2;
-	u8 anaparam3, reg;
-
-	if (!priv->is_rtl8187b) {
-		if (rfon) {
-			anaparam = RTL8187_RTL8225_ANAPARAM_ON;
-			anaparam2 = RTL8187_RTL8225_ANAPARAM2_ON;
-		} else {
-			anaparam = RTL8187_RTL8225_ANAPARAM_OFF;
-			anaparam2 = RTL8187_RTL8225_ANAPARAM2_OFF;
-		}
-	} else {
-		if (rfon) {
-			anaparam = RTL8187B_RTL8225_ANAPARAM_ON;
-			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_ON;
-			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_ON;
-		} else {
-			anaparam = RTL8187B_RTL8225_ANAPARAM_OFF;
-			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_OFF;
-			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_OFF;
-		}
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
-	if (priv->is_rtl8187b)
-		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3);
-	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg;
-	int i;
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= (1 << 1);
-	reg |= RTL818X_CMD_RESET;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	i = 10;
-	do {
-		msleep(2);
-		if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
-		      RTL818X_CMD_RESET))
-			break;
-	} while (--i);
-
-	if (!i) {
-		wiphy_err(dev->wiphy, "Reset timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	/* reload registers from eeprom */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
-
-	i = 10;
-	do {
-		msleep(4);
-		if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
-		      RTL818X_EEPROM_CMD_CONFIG))
-			break;
-	} while (--i);
-
-	if (!i) {
-		wiphy_err(dev->wiphy, "eeprom reset timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int rtl8187_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg;
-	int res;
-
-	/* reset */
-	rtl8187_set_anaparam(priv, true);
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
-	msleep(200);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
-	msleep(200);
-
-	res = rtl8187_cmd_reset(dev);
-	if (res)
-		return res;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* setup card */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-
-	rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
-	reg &= 0x3F;
-	reg |= 0x80;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
-	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-	rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
-
-	// TODO: set RESP_RATE and BRSR properly
-	rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-
-	/* host_usb_init */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
-	reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
-	rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
-	msleep(100);
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
-	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
-	msleep(100);
-
-	priv->rf->init(dev);
-
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
-	rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
-	rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
-	rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-
-	return 0;
-}
-
-static const u8 rtl8187b_reg_table[][3] = {
-	{0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
-	{0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
-	{0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
-	{0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
-
-	{0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
-	{0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
-	{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1},
-	{0xF2, 0x02, 1}, {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1},
-	{0xF6, 0x06, 1}, {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
-
-	{0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
-	{0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
-	{0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
-	{0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
-	{0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
-	{0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
-	{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2},
-
-	{0x5B, 0x40, 0}, {0x84, 0x88, 0}, {0x85, 0x24, 0}, {0x88, 0x54, 0},
-	{0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0},
-	{0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0},
-	{0x9F, 0x10, 0}, {0xB4, 0x22, 0}, {0xBE, 0x80, 0}, {0xDB, 0x00, 0},
-	{0xEE, 0x00, 0}, {0x4C, 0x00, 2},
-
-	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
-	{0x8F, 0x00, 0}
-};
-
-static int rtl8187b_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int res, i;
-	u8 reg;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* Reset PLL sequence on 8187B. Realtek note: reduces power
-	 * consumption about 30 mA */
-	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
-	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
-
-	res = rtl8187_cmd_reset(dev);
-	if (res)
-		return res;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* BRSR (Basic Rate Set Register) on 8187B looks to be the same as
-	 * RESP_RATE on 8187L in Realtek sources: each bit should be each
-	 * one of the 12 rates, all are enabled */
-	rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
-	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-	/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFFE2, 0x00, 1);
-
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-	for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
-		rtl818x_iowrite8_idx(priv,
-				     (u8 *)(uintptr_t)
-				     (rtl8187b_reg_table[i][0] | 0xFF00),
-				     rtl8187b_reg_table[i][1],
-				     rtl8187b_reg_table[i][2]);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
-	rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
-
-	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
-	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
-
-	/* RFSW_CTRL register */
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-	msleep(100);
-
-	priv->rf->init(dev);
-
-	reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-
-	rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
-	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
-	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
-
-	reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
-	rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
-	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
-	rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
-
-	rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
-
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
-
-	priv->slot_time = 0x9;
-	priv->aifsn[0] = 2; /* AIFSN[AC_VO] */
-	priv->aifsn[1] = 2; /* AIFSN[AC_VI] */
-	priv->aifsn[2] = 7; /* AIFSN[AC_BK] */
-	priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
-	rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
-
-	/* ENEDCA flag must always be set, transmit issues? */
-	rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
-
-	return 0;
-}
-
-static void rtl8187_work(struct work_struct *work)
-{
-	/* The RTL8187 returns the retry count through register 0xFFFA. In
-	 * addition, it appears to be a cumulative retry count, not the
-	 * value for the current TX packet. When multiple TX entries are
-	 * waiting in the queue, the retry count will be the total for all.
-	 * The "error" may matter for purposes of rate setting, but there is
-	 * no other choice with this hardware.
-	 */
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    work.work);
-	struct ieee80211_tx_info *info;
-	struct ieee80211_hw *dev = priv->dev;
-	static u16 retry;
-	u16 tmp;
-	u16 avg_retry;
-	int length;
-
-	mutex_lock(&priv->conf_mutex);
-	tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
-	length = skb_queue_len(&priv->b_tx_status.queue);
-	if (unlikely(!length))
-		length = 1;
-	if (unlikely(tmp < retry))
-		tmp = retry;
-	avg_retry = (tmp - retry) / length;
-	while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
-		struct sk_buff *old_skb;
-
-		old_skb = skb_dequeue(&priv->b_tx_status.queue);
-		info = IEEE80211_SKB_CB(old_skb);
-		info->status.rates[0].count = avg_retry + 1;
-		if (info->status.rates[0].count > RETRY_COUNT)
-			info->flags &= ~IEEE80211_TX_STAT_ACK;
-		ieee80211_tx_status_irqsafe(dev, old_skb);
-	}
-	retry = tmp;
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static int rtl8187_start(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u32 reg;
-	int ret;
-
-	mutex_lock(&priv->conf_mutex);
-
-	ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
-				     rtl8187b_init_hw(dev);
-	if (ret)
-		goto rtl8187_start_exit;
-
-	init_usb_anchor(&priv->anchored);
-	priv->dev = dev;
-
-	if (priv->is_rtl8187b) {
-		reg = RTL818X_RX_CONF_MGMT |
-		      RTL818X_RX_CONF_DATA |
-		      RTL818X_RX_CONF_BROADCAST |
-		      RTL818X_RX_CONF_NICMAC |
-		      RTL818X_RX_CONF_BSSID |
-		      (7 << 13 /* RX FIFO threshold NONE */) |
-		      (7 << 10 /* MAX RX DMA */) |
-		      RTL818X_RX_CONF_RX_AUTORESETPHY |
-		      RTL818X_RX_CONF_ONLYERLPKT |
-		      RTL818X_RX_CONF_MULTICAST;
-		priv->rx_conf = reg;
-		rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
-		reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-				  RTL818X_TX_CONF_HW_SEQNUM |
-				  RTL818X_TX_CONF_DISREQQSIZE |
-				  (RETRY_COUNT << 8  /* short retry limit */) |
-				  (RETRY_COUNT << 0  /* long retry limit */) |
-				  (7 << 21 /* MAX TX DMA */));
-		ret = rtl8187_init_urbs(dev);
-		if (ret)
-			goto rtl8187_start_exit;
-		ret = rtl8187b_init_status_urb(dev);
-		if (ret)
-			usb_kill_anchored_urbs(&priv->anchored);
-		goto rtl8187_start_exit;
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-
-	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
-	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
-
-	ret = rtl8187_init_urbs(dev);
-	if (ret)
-		goto rtl8187_start_exit;
-
-	reg = RTL818X_RX_CONF_ONLYERLPKT |
-	      RTL818X_RX_CONF_RX_AUTORESETPHY |
-	      RTL818X_RX_CONF_BSSID |
-	      RTL818X_RX_CONF_MGMT |
-	      RTL818X_RX_CONF_DATA |
-	      (7 << 13 /* RX FIFO threshold NONE */) |
-	      (7 << 10 /* MAX RX DMA */) |
-	      RTL818X_RX_CONF_BROADCAST |
-	      RTL818X_RX_CONF_NICMAC;
-
-	priv->rx_conf = reg;
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
-	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
-	reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-	reg  = RTL818X_TX_CONF_CW_MIN |
-	       (7 << 21 /* MAX TX DMA */) |
-	       RTL818X_TX_CONF_NO_ICV;
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg |= RTL818X_CMD_TX_ENABLE;
-	reg |= RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-	INIT_DELAYED_WORK(&priv->work, rtl8187_work);
-
-rtl8187_start_exit:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
-static void rtl8187_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct sk_buff *skb;
-	u32 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= ~RTL818X_CMD_TX_ENABLE;
-	reg &= ~RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	priv->rf->stop(dev);
-	rtl8187_set_anaparam(priv, false);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
-		dev_kfree_skb_any(skb);
-
-	usb_kill_anchored_urbs(&priv->anchored);
-	mutex_unlock(&priv->conf_mutex);
-
-	if (!priv->is_rtl8187b)
-		cancel_delayed_work_sync(&priv->work);
-}
-
-static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
-	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
-
-
-static void rtl8187_beacon_work(struct work_struct *work)
-{
-	struct rtl8187_vif *vif_priv =
-		container_of(work, struct rtl8187_vif, beacon_work.work);
-	struct ieee80211_vif *vif =
-		container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
-	struct ieee80211_hw *dev = vif_priv->dev;
-	struct ieee80211_mgmt *mgmt;
-	struct sk_buff *skb;
-
-	/* don't overflow the tx ring */
-	if (ieee80211_queue_stopped(dev, 0))
-		goto resched;
-
-	/* grab a fresh beacon */
-	skb = ieee80211_beacon_get(dev, vif);
-	if (!skb)
-		goto resched;
-
-	/*
-	 * update beacon timestamp w/ TSF value
-	 * TODO: make hardware update beacon timestamp
-	 */
-	mgmt = (struct ieee80211_mgmt *)skb->data;
-	mgmt->u.beacon.timestamp = cpu_to_le64(rtl8187_get_tsf(dev, vif));
-
-	/* TODO: use actual beacon queue */
-	skb_set_queue_mapping(skb, 0);
-
-	rtl8187_tx(dev, NULL, skb);
-
-resched:
-	/*
-	 * schedule next beacon
-	 * TODO: use hardware support for beacon timing
-	 */
-	schedule_delayed_work(&vif_priv->beacon_work,
-			usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
-}
-
-
-static int rtl8187_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_vif *vif)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct rtl8187_vif *vif_priv;
-	int i;
-	int ret = -EOPNOTSUPP;
-
-	mutex_lock(&priv->conf_mutex);
-	if (priv->vif)
-		goto exit;
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_ADHOC:
-		break;
-	default:
-		goto exit;
-	}
-
-	ret = 0;
-	priv->vif = vif;
-
-	/* Initialize driver private area */
-	vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
-	vif_priv->dev = dev;
-	INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8187_beacon_work);
-	vif_priv->enable_beacon = false;
-
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->MAC[i],
-				 ((u8 *)vif->addr)[i]);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-exit:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
-static void rtl8187_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	mutex_lock(&priv->conf_mutex);
-	priv->vif = NULL;
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
-	u32 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	/* Enable TX loopback on MAC level to avoid TX during channel
-	 * changes, as this has be seen to causes problems and the
-	 * card will stop work until next reset
-	 */
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
-	priv->rf->set_chan(dev, conf);
-	msleep(10);
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
-	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
-	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
-	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
-	mutex_unlock(&priv->conf_mutex);
-	return 0;
-}
-
-/*
- * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
- * example. Thus we have to use raw values for AC_*_PARAM register addresses.
- */
-static __le32 *rtl8187b_ac_addr[4] = {
-	(__le32 *) 0xFFF0, /* AC_VO */
-	(__le32 *) 0xFFF4, /* AC_VI */
-	(__le32 *) 0xFFFC, /* AC_BK */
-	(__le32 *) 0xFFF8, /* AC_BE */
-};
-
-#define SIFS_TIME 0xa
-
-static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot,
-			     bool use_short_preamble)
-{
-	if (priv->is_rtl8187b) {
-		u8 difs, eifs;
-		u16 ack_timeout;
-		int queue;
-
-		if (use_short_slot) {
-			priv->slot_time = 0x9;
-			difs = 0x1c;
-			eifs = 0x53;
-		} else {
-			priv->slot_time = 0x14;
-			difs = 0x32;
-			eifs = 0x5b;
-		}
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
-
-		/*
-		 * BRSR+1 on 8187B is in fact EIFS register
-		 * Value in units of 4 us
-		 */
-		rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs);
-
-		/*
-		 * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout
-		 * register. In units of 4 us like eifs register
-		 * ack_timeout = ack duration + plcp + difs + preamble
-		 */
-		ack_timeout = 112 + 48 + difs;
-		if (use_short_preamble)
-			ack_timeout += 72;
-		else
-			ack_timeout += 144;
-		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER,
-				 DIV_ROUND_UP(ack_timeout, 4));
-
-		for (queue = 0; queue < 4; queue++)
-			rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue],
-					 priv->aifsn[queue] * priv->slot_time +
-					 SIFS_TIME);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		if (use_short_slot) {
-			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
-			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
-			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
-		} else {
-			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
-			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
-			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
-		}
-	}
-}
-
-static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *info,
-				     u32 changed)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct rtl8187_vif *vif_priv;
-	int i;
-	u8 reg;
-
-	vif_priv = (struct rtl8187_vif *)&vif->drv_priv;
-
-	if (changed & BSS_CHANGED_BSSID) {
-		mutex_lock(&priv->conf_mutex);
-		for (i = 0; i < ETH_ALEN; i++)
-			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
-					 info->bssid[i]);
-
-		if (priv->is_rtl8187b)
-			reg = RTL818X_MSR_ENEDCA;
-		else
-			reg = 0;
-
-		if (is_valid_ether_addr(info->bssid)) {
-			if (vif->type == NL80211_IFTYPE_ADHOC)
-				reg |= RTL818X_MSR_ADHOC;
-			else
-				reg |= RTL818X_MSR_INFRA;
-		}
-		else
-			reg |= RTL818X_MSR_NO_LINK;
-
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-
-		mutex_unlock(&priv->conf_mutex);
-	}
-
-	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
-		rtl8187_conf_erp(priv, info->use_short_slot,
-				 info->use_short_preamble);
-
-	if (changed & BSS_CHANGED_BEACON_ENABLED)
-		vif_priv->enable_beacon = info->enable_beacon;
-
-	if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
-		cancel_delayed_work_sync(&vif_priv->beacon_work);
-		if (vif_priv->enable_beacon)
-			schedule_work(&vif_priv->beacon_work.work);
-	}
-
-}
-
-static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
-				     struct netdev_hw_addr_list *mc_list)
-{
-	return netdev_hw_addr_list_count(mc_list);
-}
-
-static void rtl8187_configure_filter(struct ieee80211_hw *dev,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     u64 multicast)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (changed_flags & FIF_FCSFAIL)
-		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
-	if (changed_flags & FIF_CONTROL)
-		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
-	if (changed_flags & FIF_OTHER_BSS)
-		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-	if (*total_flags & FIF_ALLMULTI || multicast > 0)
-		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
-	else
-		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
-
-	*total_flags = 0;
-
-	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
-		*total_flags |= FIF_FCSFAIL;
-	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
-		*total_flags |= FIF_CONTROL;
-	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
-		*total_flags |= FIF_OTHER_BSS;
-	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
-		*total_flags |= FIF_ALLMULTI;
-
-	rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
-}
-
-static int rtl8187_conf_tx(struct ieee80211_hw *dev,
-			   struct ieee80211_vif *vif, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 cw_min, cw_max;
-
-	if (queue > 3)
-		return -EINVAL;
-
-	cw_min = fls(params->cw_min);
-	cw_max = fls(params->cw_max);
-
-	if (priv->is_rtl8187b) {
-		priv->aifsn[queue] = params->aifs;
-
-		/*
-		 * This is the structure of AC_*_PARAM registers in 8187B:
-		 * - TXOP limit field, bit offset = 16
-		 * - ECWmax, bit offset = 12
-		 * - ECWmin, bit offset = 8
-		 * - AIFS, bit offset = 0
-		 */
-		rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue],
-				  (params->txop << 16) | (cw_max << 12) |
-				  (cw_min << 8) | (params->aifs *
-				  priv->slot_time + SIFS_TIME));
-	} else {
-		if (queue != 0)
-			return -EINVAL;
-
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
-				 cw_min | (cw_max << 4));
-	}
-	return 0;
-}
-
-
-static const struct ieee80211_ops rtl8187_ops = {
-	.tx			= rtl8187_tx,
-	.start			= rtl8187_start,
-	.stop			= rtl8187_stop,
-	.add_interface		= rtl8187_add_interface,
-	.remove_interface	= rtl8187_remove_interface,
-	.config			= rtl8187_config,
-	.bss_info_changed	= rtl8187_bss_info_changed,
-	.prepare_multicast	= rtl8187_prepare_multicast,
-	.configure_filter	= rtl8187_configure_filter,
-	.conf_tx		= rtl8187_conf_tx,
-	.rfkill_poll		= rtl8187_rfkill_poll,
-	.get_tsf		= rtl8187_get_tsf,
-};
-
-static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
-	udelay(10);
-}
-
-static int rtl8187_probe(struct usb_interface *intf,
-				   const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct ieee80211_hw *dev;
-	struct rtl8187_priv *priv;
-	struct eeprom_93cx6 eeprom;
-	struct ieee80211_channel *channel;
-	const char *chip_name;
-	u16 txpwr, reg;
-	u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
-	int err, i;
-	u8 mac_addr[ETH_ALEN];
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
-	if (!dev) {
-		printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
-		return -ENOMEM;
-	}
-
-	priv = dev->priv;
-	priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
-
-	/* allocate "DMA aware" buffer for register accesses */
-	priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
-	if (!priv->io_dmabuf) {
-		err = -ENOMEM;
-		goto err_free_dev;
-	}
-	mutex_init(&priv->io_mutex);
-
-	SET_IEEE80211_DEV(dev, &intf->dev);
-	usb_set_intfdata(intf, dev);
-	priv->udev = udev;
-
-	usb_get_dev(udev);
-
-	skb_queue_head_init(&priv->rx_queue);
-
-	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
-	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
-
-	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
-	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
-	priv->map = (struct rtl818x_csr *)0xFF00;
-
-	priv->band.band = IEEE80211_BAND_2GHZ;
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
-	priv->band.bitrates = priv->rates;
-	priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
-
-	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_SIGNAL_DBM |
-		     IEEE80211_HW_RX_INCLUDES_FCS;
-	/* Initialize rate-control variables */
-	dev->max_rates = 1;
-	dev->max_rate_tries = RETRY_COUNT;
-
-	eeprom.data = dev;
-	eeprom.register_read = rtl8187_eeprom_register_read;
-	eeprom.register_write = rtl8187_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	udelay(10);
-
-	eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
-			       (__le16 __force *)mac_addr, 3);
-	if (!is_valid_ether_addr(mac_addr)) {
-		printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
-		       "generated MAC address\n");
-		eth_random_addr(mac_addr);
-	}
-	SET_IEEE80211_PERM_ADDR(dev, mac_addr);
-
-	channel = priv->channels;
-	for (i = 0; i < 3; i++) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-	for (i = 0; i < 2; i++) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-
-	eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
-			  &priv->txpwr_base);
-
-	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
-	/* 0 means asic B-cut, we should use SW 3 wire
-	 * bit-by-bit banging for radio. 1 means we can use
-	 * USB specific request to write radio registers */
-	priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	if (!priv->is_rtl8187b) {
-		u32 reg32;
-		reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-		reg32 &= RTL818X_TX_CONF_HWVER_MASK;
-		switch (reg32) {
-		case RTL818X_TX_CONF_R8187vD_B:
-			/* Some RTL8187B devices have a USB ID of 0x8187
-			 * detect them here */
-			chip_name = "RTL8187BvB(early)";
-			priv->is_rtl8187b = 1;
-			priv->hw_rev = RTL8187BvB;
-			break;
-		case RTL818X_TX_CONF_R8187vD:
-			chip_name = "RTL8187vD";
-			break;
-		default:
-			chip_name = "RTL8187vB (default)";
-		}
-       } else {
-		/*
-		 * Force USB request to write radio registers for 8187B, Realtek
-		 * only uses it in their sources
-		 */
-		/*if (priv->asic_rev == 0) {
-			printk(KERN_WARNING "rtl8187: Forcing use of USB "
-			       "requests to write to radio registers\n");
-			priv->asic_rev = 1;
-		}*/
-		switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
-		case RTL818X_R8187B_B:
-			chip_name = "RTL8187BvB";
-			priv->hw_rev = RTL8187BvB;
-			break;
-		case RTL818X_R8187B_D:
-			chip_name = "RTL8187BvD";
-			priv->hw_rev = RTL8187BvD;
-			break;
-		case RTL818X_R8187B_E:
-			chip_name = "RTL8187BvE";
-			priv->hw_rev = RTL8187BvE;
-			break;
-		default:
-			chip_name = "RTL8187BvB (default)";
-			priv->hw_rev = RTL8187BvB;
-		}
-	}
-
-	if (!priv->is_rtl8187b) {
-		for (i = 0; i < 2; i++) {
-			eeprom_93cx6_read(&eeprom,
-					  RTL8187_EEPROM_TXPWR_CHAN_6 + i,
-					  &txpwr);
-			(*channel++).hw_value = txpwr & 0xFF;
-			(*channel++).hw_value = txpwr >> 8;
-		}
-	} else {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-
-		eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-
-		eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-	/* Handle the differing rfkill GPIO bit in different models */
-	priv->rfkill_mask = RFKILL_MASK_8187_89_97;
-	if (product_id == 0x8197 || product_id == 0x8198) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
-		if (reg & 0xFF00)
-			priv->rfkill_mask = RFKILL_MASK_8198;
-	}
-	dev->vif_data_size = sizeof(struct rtl8187_vif);
-	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-				      BIT(NL80211_IFTYPE_ADHOC) ;
-
-	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
-		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
-		       " info!\n");
-
-	priv->rf = rtl8187_detect_rf(dev);
-	dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
-				  sizeof(struct rtl8187_tx_hdr) :
-				  sizeof(struct rtl8187b_tx_hdr);
-	if (!priv->is_rtl8187b)
-		dev->queues = 1;
-	else
-		dev->queues = 4;
-
-	err = ieee80211_register_hw(dev);
-	if (err) {
-		printk(KERN_ERR "rtl8187: Cannot register device\n");
-		goto err_free_dmabuf;
-	}
-	mutex_init(&priv->conf_mutex);
-	skb_queue_head_init(&priv->b_tx_status.queue);
-
-	wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
-		   mac_addr, chip_name, priv->asic_rev, priv->rf->name,
-		   priv->rfkill_mask);
-
-#ifdef CONFIG_RTL8187_LEDS
-	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
-	reg &= 0xFF;
-	rtl8187_leds_init(dev, reg);
-#endif
-	rtl8187_rfkill_init(dev);
-
-	return 0;
-
- err_free_dmabuf:
-	kfree(priv->io_dmabuf);
-	usb_set_intfdata(intf, NULL);
-	usb_put_dev(udev);
- err_free_dev:
-	ieee80211_free_hw(dev);
-	return err;
-}
-
-static void rtl8187_disconnect(struct usb_interface *intf)
-{
-	struct ieee80211_hw *dev = usb_get_intfdata(intf);
-	struct rtl8187_priv *priv;
-
-	if (!dev)
-		return;
-
-#ifdef CONFIG_RTL8187_LEDS
-	rtl8187_leds_exit(dev);
-#endif
-	rtl8187_rfkill_exit(dev);
-	ieee80211_unregister_hw(dev);
-
-	priv = dev->priv;
-	usb_reset_device(priv->udev);
-	usb_put_dev(interface_to_usbdev(intf));
-	kfree(priv->io_dmabuf);
-	ieee80211_free_hw(dev);
-}
-
-static struct usb_driver rtl8187_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= rtl8187_table,
-	.probe		= rtl8187_probe,
-	.disconnect	= rtl8187_disconnect,
-	.disable_hub_initiated_lpm = 1,
-};
-
-module_usb_driver(rtl8187_driver);
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.c b/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.c
deleted file mode 100644
index c2d5b495c..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Linux LED driver for RTL8187
- *
- * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
- *
- * Based on the LED handling in the r8187 driver, which is:
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_RTL8187_LEDS
-
-#include <net/mac80211.h>
-#include <linux/usb.h>
-#include <linux/eeprom_93cx6.h>
-
-#include "rtl8187.h"
-#include "leds.h"
-
-static void led_turn_on(struct work_struct *work)
-{
-	/* As this routine does read/write operations on the hardware, it must
-	 * be run from a work queue.
-	 */
-	u8 reg;
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    led_on.work);
-	struct rtl8187_led *led = &priv->led_tx;
-
-	/* Don't change the LED, when the device is down. */
-	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
-		return ;
-
-	/* Skip if the LED is not registered. */
-	if (!led->dev)
-		return;
-	mutex_lock(&priv->conf_mutex);
-	switch (led->ledpin) {
-	case LED_PIN_GPIO0:
-		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
-		break;
-	case LED_PIN_LED0:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_LED1:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_HW:
-	default:
-		break;
-	}
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static void led_turn_off(struct work_struct *work)
-{
-	/* As this routine does read/write operations on the hardware, it must
-	 * be run from a work queue.
-	 */
-	u8 reg;
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    led_off.work);
-	struct rtl8187_led *led = &priv->led_tx;
-
-	/* Don't change the LED, when the device is down. */
-	if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED)
-		return ;
-
-	/* Skip if the LED is not registered. */
-	if (!led->dev)
-		return;
-	mutex_lock(&priv->conf_mutex);
-	switch (led->ledpin) {
-	case LED_PIN_GPIO0:
-		rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
-		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
-		break;
-	case LED_PIN_LED0:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_LED1:
-		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
-		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-		break;
-	case LED_PIN_HW:
-	default:
-		break;
-	}
-	mutex_unlock(&priv->conf_mutex);
-}
-
-/* Callback from the LED subsystem. */
-static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
-				   enum led_brightness brightness)
-{
-	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
-					       led_dev);
-	struct ieee80211_hw *hw = led->dev;
-	struct rtl8187_priv *priv;
-	static bool radio_on;
-
-	if (!hw)
-		return;
-	priv = hw->priv;
-	if (led->is_radio) {
-		if (brightness == LED_FULL) {
-			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
-			radio_on = true;
-		} else if (radio_on) {
-			radio_on = false;
-			cancel_delayed_work(&priv->led_on);
-			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
-		}
-	} else if (radio_on) {
-		if (brightness == LED_OFF) {
-			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
-			/* The LED is off for 1/20 sec - it just blinks. */
-			ieee80211_queue_delayed_work(hw, &priv->led_on,
-						     HZ / 20);
-		} else
-			ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
-	}
-}
-
-static int rtl8187_register_led(struct ieee80211_hw *dev,
-				struct rtl8187_led *led, const char *name,
-				const char *default_trigger, u8 ledpin,
-				bool is_radio)
-{
-	int err;
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (led->dev)
-		return -EEXIST;
-	if (!default_trigger)
-		return -EINVAL;
-	led->dev = dev;
-	led->ledpin = ledpin;
-	led->is_radio = is_radio;
-	strncpy(led->name, name, sizeof(led->name));
-
-	led->led_dev.name = led->name;
-	led->led_dev.default_trigger = default_trigger;
-	led->led_dev.brightness_set = rtl8187_led_brightness_set;
-
-	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
-	if (err) {
-		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
-		led->dev = NULL;
-		return err;
-	}
-	return 0;
-}
-
-static void rtl8187_unregister_led(struct rtl8187_led *led)
-{
-	struct ieee80211_hw *hw = led->dev;
-	struct rtl8187_priv *priv = hw->priv;
-
-	led_classdev_unregister(&led->led_dev);
-	flush_delayed_work(&priv->led_off);
-	led->dev = NULL;
-}
-
-void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	char name[RTL8187_LED_MAX_NAME_LEN + 1];
-	u8 ledpin;
-	int err;
-
-	/* According to the vendor driver, the LED operation depends on the
-	 * customer ID encoded in the EEPROM
-	 */
-	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
-	switch (custid) {
-	case EEPROM_CID_RSVD0:
-	case EEPROM_CID_RSVD1:
-	case EEPROM_CID_SERCOMM_PS:
-	case EEPROM_CID_QMI:
-	case EEPROM_CID_DELL:
-	case EEPROM_CID_TOSHIBA:
-		ledpin = LED_PIN_GPIO0;
-		break;
-	case EEPROM_CID_ALPHA0:
-		ledpin = LED_PIN_LED0;
-		break;
-	case EEPROM_CID_HW:
-		ledpin = LED_PIN_HW;
-		break;
-	default:
-		ledpin = LED_PIN_GPIO0;
-	}
-
-	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
-	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::radio", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_radio, name,
-			 ieee80211_get_radio_led_name(dev), ledpin, true);
-	if (err)
-		return;
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_tx, name,
-			 ieee80211_get_tx_led_name(dev), ledpin, false);
-	if (err)
-		goto err_tx;
-
-	snprintf(name, sizeof(name),
-		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
-	err = rtl8187_register_led(dev, &priv->led_rx, name,
-			 ieee80211_get_rx_led_name(dev), ledpin, false);
-	if (!err)
-		return;
-
-	/* registration of RX LED failed - unregister */
-	rtl8187_unregister_led(&priv->led_tx);
-err_tx:
-	rtl8187_unregister_led(&priv->led_radio);
-}
-
-void rtl8187_leds_exit(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	rtl8187_unregister_led(&priv->led_radio);
-	rtl8187_unregister_led(&priv->led_rx);
-	rtl8187_unregister_led(&priv->led_tx);
-	cancel_delayed_work_sync(&priv->led_off);
-	cancel_delayed_work_sync(&priv->led_on);
-}
-#endif /* def CONFIG_RTL8187_LEDS */
-
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.h b/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.h
deleted file mode 100644
index d743c96d4..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/leds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Definitions for RTL8187 leds
- *
- * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
- *
- * Based on the LED handling in the r8187 driver, which is:
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RTL8187_LED_H
-#define RTL8187_LED_H
-
-#ifdef CONFIG_RTL8187_LEDS
-
-#define RTL8187_LED_MAX_NAME_LEN	21
-
-#include <linux/leds.h>
-#include <linux/types.h>
-
-enum {
-	LED_PIN_LED0,
-	LED_PIN_LED1,
-	LED_PIN_GPIO0,
-	LED_PIN_HW
-};
-
-enum {
-	EEPROM_CID_RSVD0 = 0x00,
-	EEPROM_CID_RSVD1 = 0xFF,
-	EEPROM_CID_ALPHA0 = 0x01,
-	EEPROM_CID_SERCOMM_PS = 0x02,
-	EEPROM_CID_HW = 0x03,
-	EEPROM_CID_TOSHIBA = 0x04,
-	EEPROM_CID_QMI = 0x07,
-	EEPROM_CID_DELL = 0x08
-};
-
-struct rtl8187_led {
-	struct ieee80211_hw *dev;
-	/* The LED class device */
-	struct led_classdev led_dev;
-	/* The pin/method used to control the led */
-	u8 ledpin;
-	/* The unique name string for this LED device. */
-	char name[RTL8187_LED_MAX_NAME_LEN + 1];
-	/* If the LED is radio or tx/rx */
-	bool is_radio;
-};
-
-void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code);
-void rtl8187_leds_exit(struct ieee80211_hw *dev);
-
-#endif /* def CONFIG_RTL8187_LEDS */
-
-#endif /* RTL8187_LED_H */
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.c b/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
deleted file mode 100644
index 341167199..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Linux RFKILL support for RTL8187
- *
- * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *
- * Based on the RFKILL handling in the r8187 driver, which is:
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/usb.h>
-#include <net/mac80211.h>
-
-#include "rtl8187.h"
-#include "rfkill.h"
-
-static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
-{
-	u8 gpio;
-
-	gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask);
-	gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
-
-	return gpio & priv->rfkill_mask;
-}
-
-void rtl8187_rfkill_init(struct ieee80211_hw *hw)
-{
-	struct rtl8187_priv *priv = hw->priv;
-
-	priv->rfkill_off = rtl8187_is_radio_enabled(priv);
-	printk(KERN_INFO "rtl8187: wireless switch is %s\n",
-	       priv->rfkill_off ? "on" : "off");
-	wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
-	wiphy_rfkill_start_polling(hw->wiphy);
-}
-
-void rtl8187_rfkill_poll(struct ieee80211_hw *hw)
-{
-	bool enabled;
-	struct rtl8187_priv *priv = hw->priv;
-
-	mutex_lock(&priv->conf_mutex);
-	enabled = rtl8187_is_radio_enabled(priv);
-	if (unlikely(enabled != priv->rfkill_off)) {
-		priv->rfkill_off = enabled;
-		printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
-		       enabled ? "on" : "off");
-		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
-	}
-	mutex_unlock(&priv->conf_mutex);
-}
-
-void rtl8187_rfkill_exit(struct ieee80211_hw *hw)
-{
-	wiphy_rfkill_stop_polling(hw->wiphy);
-}
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.h b/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.h
deleted file mode 100644
index e12575e96..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/rfkill.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef RTL8187_RFKILL_H
-#define RTL8187_RFKILL_H
-
-void rtl8187_rfkill_init(struct ieee80211_hw *hw);
-void rtl8187_rfkill_poll(struct ieee80211_hw *hw);
-void rtl8187_rfkill_exit(struct ieee80211_hw *hw);
-
-#endif /* RTL8187_RFKILL_H */
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
deleted file mode 100644
index a6ad79f61..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Definitions for RTL8187 hardware
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RTL8187_H
-#define RTL8187_H
-
-#include <linux/cache.h>
-
-#include "rtl818x.h"
-#include "leds.h"
-
-#define RTL8187_EEPROM_TXPWR_BASE	0x05
-#define RTL8187_EEPROM_MAC_ADDR		0x07
-#define RTL8187_EEPROM_TXPWR_CHAN_1	0x16	/* 3 channels */
-#define RTL8187_EEPROM_TXPWR_CHAN_6	0x1B	/* 2 channels */
-#define RTL8187_EEPROM_TXPWR_CHAN_4	0x3D	/* 2 channels */
-#define RTL8187_EEPROM_SELECT_GPIO	0x3B
-
-#define RTL8187_REQT_READ	0xC0
-#define RTL8187_REQT_WRITE	0x40
-#define RTL8187_REQ_GET_REG	0x05
-#define RTL8187_REQ_SET_REG	0x05
-
-#define RTL8187_MAX_RX		0x9C4
-
-#define RFKILL_MASK_8187_89_97	0x2
-#define RFKILL_MASK_8198	0x4
-
-#define RETRY_COUNT		7
-
-struct rtl8187_rx_info {
-	struct urb *urb;
-	struct ieee80211_hw *dev;
-};
-
-struct rtl8187_rx_hdr {
-	__le32 flags;
-	u8 noise;
-	u8 signal;
-	u8 agc;
-	u8 reserved;
-	__le64 mac_time;
-} __packed;
-
-struct rtl8187b_rx_hdr {
-	__le32 flags;
-	__le64 mac_time;
-	u8 sq;
-	u8 rssi;
-	u8 agc;
-	u8 flags2;
-	__le16 snr_long2end;
-	s8 pwdb_g12;
-	u8 fot;
-} __packed;
-
-/* {rtl8187,rtl8187b}_tx_info is in skb */
-
-struct rtl8187_tx_hdr {
-	__le32 flags;
-	__le16 rts_duration;
-	__le16 len;
-	__le32 retry;
-} __packed;
-
-struct rtl8187b_tx_hdr {
-	__le32 flags;
-	__le16 rts_duration;
-	__le16 len;
-	__le32 unused_1;
-	__le16 unused_2;
-	__le16 tx_duration;
-	__le32 unused_3;
-	__le32 retry;
-	__le32 unused_4[2];
-} __packed;
-
-enum {
-	DEVICE_RTL8187,
-	DEVICE_RTL8187B
-};
-
-struct rtl8187_vif {
-	struct ieee80211_hw *dev;
-
-	/* beaconing */
-	struct delayed_work beacon_work;
-	bool enable_beacon;
-};
-
-struct rtl8187_priv {
-	/* common between rtl818x drivers */
-	struct rtl818x_csr *map;
-	const struct rtl818x_rf_ops *rf;
-	struct ieee80211_vif *vif;
-
-	/* The mutex protects the TX loopback state.
-	 * Any attempt to set channels concurrently locks the device.
-	 */
-	struct mutex conf_mutex;
-
-	/* rtl8187 specific */
-	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[12];
-	struct ieee80211_supported_band band;
-	struct usb_device *udev;
-	u32 rx_conf;
-	struct usb_anchor anchored;
-	struct delayed_work work;
-	struct ieee80211_hw *dev;
-#ifdef CONFIG_RTL8187_LEDS
-	struct rtl8187_led led_radio;
-	struct rtl8187_led led_tx;
-	struct rtl8187_led led_rx;
-	struct delayed_work led_on;
-	struct delayed_work led_off;
-#endif
-	u16 txpwr_base;
-	u8 asic_rev;
-	u8 is_rtl8187b;
-	enum {
-		RTL8187BvB,
-		RTL8187BvD,
-		RTL8187BvE
-	} hw_rev;
-	struct sk_buff_head rx_queue;
-	u8 signal;
-	u8 noise;
-	u8 slot_time;
-	u8 aifsn[4];
-	u8 rfkill_mask;
-	struct {
-		union {
-			__le64 buf;
-			u8 dummy1[L1_CACHE_BYTES];
-		} ____cacheline_aligned;
-		struct sk_buff_head queue;
-	} b_tx_status; /* This queue is used by both -b and non-b devices */
-	struct mutex io_mutex;
-	union {
-		u8 bits8;
-		__le16 bits16;
-		__le32 bits32;
-		u8 dummy2[L1_CACHE_BYTES];
-	} *io_dmabuf ____cacheline_aligned;
-	bool rfkill_off;
-	u16 seqno;
-};
-
-void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
-
-static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
-				     u8 *addr, u8 idx)
-{
-	u8 val;
-
-	mutex_lock(&priv->io_mutex);
-	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
-			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
-
-	val = priv->io_dmabuf->bits8;
-	mutex_unlock(&priv->io_mutex);
-
-	return val;
-}
-
-static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
-{
-	return rtl818x_ioread8_idx(priv, addr, 0);
-}
-
-static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
-				       __le16 *addr, u8 idx)
-{
-	__le16 val;
-
-	mutex_lock(&priv->io_mutex);
-	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
-			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
-
-	val = priv->io_dmabuf->bits16;
-	mutex_unlock(&priv->io_mutex);
-
-	return le16_to_cpu(val);
-}
-
-static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
-{
-	return rtl818x_ioread16_idx(priv, addr, 0);
-}
-
-static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
-				       __le32 *addr, u8 idx)
-{
-	__le32 val;
-
-	mutex_lock(&priv->io_mutex);
-	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
-			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
-
-	val = priv->io_dmabuf->bits32;
-	mutex_unlock(&priv->io_mutex);
-
-	return le32_to_cpu(val);
-}
-
-static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
-{
-	return rtl818x_ioread32_idx(priv, addr, 0);
-}
-
-static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
-					u8 *addr, u8 val, u8 idx)
-{
-	mutex_lock(&priv->io_mutex);
-
-	priv->io_dmabuf->bits8 = val;
-	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
-
-	mutex_unlock(&priv->io_mutex);
-}
-
-static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
-{
-	rtl818x_iowrite8_idx(priv, addr, val, 0);
-}
-
-static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
-					 __le16 *addr, u16 val, u8 idx)
-{
-	mutex_lock(&priv->io_mutex);
-
-	priv->io_dmabuf->bits16 = cpu_to_le16(val);
-	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
-
-	mutex_unlock(&priv->io_mutex);
-}
-
-static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
-				     u16 val)
-{
-	rtl818x_iowrite16_idx(priv, addr, val, 0);
-}
-
-static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
-					 __le32 *addr, u32 val, u8 idx)
-{
-	mutex_lock(&priv->io_mutex);
-
-	priv->io_dmabuf->bits32 = cpu_to_le32(val);
-	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03,
-			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
-
-	mutex_unlock(&priv->io_mutex);
-}
-
-static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
-				     u32 val)
-{
-	rtl818x_iowrite32_idx(priv, addr, val, 0);
-}
-
-#endif /* RTL8187_H */
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c b/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
deleted file mode 100644
index 5ecf18ed6..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
+++ /dev/null
@@ -1,961 +0,0 @@
-/*
- * Radio tuning for RTL8225 on RTL8187
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * Magic delays, register offsets, and phy value tables below are
- * taken from the original r8187 driver sources.  Thanks to Realtek
- * for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/usb.h>
-#include <net/mac80211.h>
-
-#include "rtl8187.h"
-#include "rtl8225.h"
-
-static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u16 reg80, reg84, reg82;
-	u32 bangdata;
-	int i;
-
-	bangdata = (data << 4) | (addr & 0xf);
-
-	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
-	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
-
-	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
-	udelay(10);
-
-	for (i = 15; i >= 0; i--) {
-		u16 reg = reg80 | (bangdata & (1 << i)) >> i;
-
-		if (i & 1)
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
-
-		if (!(i & 1))
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
-}
-
-static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u16 reg80, reg82, reg84;
-
-	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
-	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
-	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
-
-	reg80 &= ~(0x3 << 2);
-	reg84 &= ~0xF;
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	udelay(2);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
-	udelay(10);
-
-	mutex_lock(&priv->io_mutex);
-
-	priv->io_dmabuf->bits16 = data;
-	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
-			HZ / 2);
-
-	mutex_unlock(&priv->io_mutex);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	udelay(10);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
-}
-
-static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (priv->asic_rev)
-		rtl8225_write_8051(dev, addr, cpu_to_le16(data));
-	else
-		rtl8225_write_bitbang(dev, addr, data);
-}
-
-static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u16 reg80, reg82, reg84, out;
-	int i;
-
-	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
-	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
-	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
-
-	reg80 &= ~0xF;
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
-	udelay(4);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
-	udelay(5);
-
-	for (i = 4; i >= 0; i--) {
-		u16 reg = reg80 | ((addr >> i) & 1);
-
-		if (!(i & 1)) {
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-			udelay(1);
-		}
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg | (1 << 1));
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg | (1 << 1));
-		udelay(2);
-
-		if (i & 1) {
-			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
-			udelay(1);
-		}
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3) | (1 << 1));
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3));
-	udelay(2);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3));
-	udelay(2);
-
-	out = 0;
-	for (i = 11; i >= 0; i--) {
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3));
-		udelay(1);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		udelay(2);
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3) | (1 << 1));
-		udelay(2);
-
-		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
-			out |= 1 << i;
-
-		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-				  reg80 | (1 << 3));
-		udelay(2);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
-			  reg80 | (1 << 3) | (1 << 2));
-	udelay(2);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
-
-	return out;
-}
-
-static const u16 rtl8225bcd_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
-	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
-};
-
-static const u8 rtl8225_agc[] = {
-	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
-	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
-	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
-	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
-	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
-	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
-	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
-	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
-	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
-	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
-	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
-	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
-	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
-};
-
-static const u8 rtl8225_gain[] = {
-	0x23, 0x88, 0x7c, 0xa5,	/* -82dBm */
-	0x23, 0x88, 0x7c, 0xb5,	/* -82dBm */
-	0x23, 0x88, 0x7c, 0xc5,	/* -82dBm */
-	0x33, 0x80, 0x79, 0xc5,	/* -78dBm */
-	0x43, 0x78, 0x76, 0xc5,	/* -74dBm */
-	0x53, 0x60, 0x73, 0xc5,	/* -70dBm */
-	0x63, 0x58, 0x70, 0xc5,	/* -66dBm */
-};
-
-static const u8 rtl8225_threshold[] = {
-	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
-};
-
-static const u8 rtl8225_tx_gain_cck_ofdm[] = {
-	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
-};
-
-static const u8 rtl8225_tx_power_cck[] = {
-	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
-	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
-	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
-	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
-	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
-	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
-};
-
-static const u8 rtl8225_tx_power_cck_ch14[] = {
-	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
-	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
-	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
-	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
-	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
-	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225_tx_power_ofdm[] = {
-	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
-};
-
-static const u32 rtl8225_chan[] = {
-	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
-	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
-};
-
-static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-	const u8 *tmp;
-	u32 reg;
-	int i;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xF;
-	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
-
-	cck_power = min(cck_power, (u8)11);
-	if (ofdm_power > (u8)15)
-		ofdm_power = 25;
-	else
-		ofdm_power += 10;
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
-			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
-
-	if (channel == 14)
-		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
-	else
-		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
-
-	for (i = 0; i < 8; i++)
-		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
-
-	msleep(1); // FIXME: optional?
-
-	/* anaparam2 on */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-			  RTL8187_RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl8225_write_phy_ofdm(dev, 2, 0x42);
-	rtl8225_write_phy_ofdm(dev, 6, 0x00);
-	rtl8225_write_phy_ofdm(dev, 8, 0x00);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
-			 rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
-
-	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
-
-	rtl8225_write_phy_ofdm(dev, 5, *tmp);
-	rtl8225_write_phy_ofdm(dev, 7, *tmp);
-
-	msleep(1);
-}
-
-static void rtl8225_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-
-	rtl8225_write(dev, 0x0, 0x067);
-	rtl8225_write(dev, 0x1, 0xFE0);
-	rtl8225_write(dev, 0x2, 0x44D);
-	rtl8225_write(dev, 0x3, 0x441);
-	rtl8225_write(dev, 0x4, 0x486);
-	rtl8225_write(dev, 0x5, 0xBC0);
-	rtl8225_write(dev, 0x6, 0xAE6);
-	rtl8225_write(dev, 0x7, 0x82A);
-	rtl8225_write(dev, 0x8, 0x01F);
-	rtl8225_write(dev, 0x9, 0x334);
-	rtl8225_write(dev, 0xA, 0xFD4);
-	rtl8225_write(dev, 0xB, 0x391);
-	rtl8225_write(dev, 0xC, 0x050);
-	rtl8225_write(dev, 0xD, 0x6DB);
-	rtl8225_write(dev, 0xE, 0x029);
-	rtl8225_write(dev, 0xF, 0x914); msleep(100);
-
-	rtl8225_write(dev, 0x2, 0xC4D); msleep(200);
-	rtl8225_write(dev, 0x2, 0x44D); msleep(200);
-
-	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
-		rtl8225_write(dev, 0x02, 0x0c4d);
-		msleep(200);
-		rtl8225_write(dev, 0x02, 0x044d);
-		msleep(100);
-		if (!(rtl8225_read(dev, 6) & (1 << 7)))
-			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
-				   rtl8225_read(dev, 6));
-	}
-
-	rtl8225_write(dev, 0x0, 0x127);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
-		rtl8225_write(dev, 0x1, i + 1);
-		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
-	}
-
-	rtl8225_write(dev, 0x0, 0x027);
-	rtl8225_write(dev, 0x0, 0x22F);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
-		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
-	}
-
-	msleep(1);
-
-	rtl8225_write_phy_ofdm(dev, 0x00, 0x01);
-	rtl8225_write_phy_ofdm(dev, 0x01, 0x02);
-	rtl8225_write_phy_ofdm(dev, 0x02, 0x42);
-	rtl8225_write_phy_ofdm(dev, 0x03, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x04, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x05, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x06, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x07, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x08, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe);
-	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09);
-	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80);
-	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01);
-	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3);
-	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38);
-	rtl8225_write_phy_ofdm(dev, 0x10, 0x84);
-	rtl8225_write_phy_ofdm(dev, 0x11, 0x06);
-	rtl8225_write_phy_ofdm(dev, 0x12, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x13, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x14, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x15, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x16, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x17, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x18, 0xef);
-	rtl8225_write_phy_ofdm(dev, 0x19, 0x19);
-	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76);
-	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04);
-	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95);
-	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75);
-	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f);
-	rtl8225_write_phy_ofdm(dev, 0x21, 0x27);
-	rtl8225_write_phy_ofdm(dev, 0x22, 0x16);
-	rtl8225_write_phy_ofdm(dev, 0x24, 0x46);
-	rtl8225_write_phy_ofdm(dev, 0x25, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);
-	rtl8225_write_phy_ofdm(dev, 0x27, 0x88);
-
-	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
-	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
-	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
-	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
-
-	rtl8225_write_phy_cck(dev, 0x00, 0x98);
-	rtl8225_write_phy_cck(dev, 0x03, 0x20);
-	rtl8225_write_phy_cck(dev, 0x04, 0x7e);
-	rtl8225_write_phy_cck(dev, 0x05, 0x12);
-	rtl8225_write_phy_cck(dev, 0x06, 0xfc);
-	rtl8225_write_phy_cck(dev, 0x07, 0x78);
-	rtl8225_write_phy_cck(dev, 0x08, 0x2e);
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b);
-	rtl8225_write_phy_cck(dev, 0x11, 0x88);
-	rtl8225_write_phy_cck(dev, 0x12, 0x47);
-	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
-	rtl8225_write_phy_cck(dev, 0x19, 0x00);
-	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
-	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
-	rtl8225_write_phy_cck(dev, 0x40, 0x86);
-	rtl8225_write_phy_cck(dev, 0x41, 0x8d);
-	rtl8225_write_phy_cck(dev, 0x42, 0x15);
-	rtl8225_write_phy_cck(dev, 0x43, 0x18);
-	rtl8225_write_phy_cck(dev, 0x44, 0x1f);
-	rtl8225_write_phy_cck(dev, 0x45, 0x1e);
-	rtl8225_write_phy_cck(dev, 0x46, 0x1a);
-	rtl8225_write_phy_cck(dev, 0x47, 0x15);
-	rtl8225_write_phy_cck(dev, 0x48, 0x10);
-	rtl8225_write_phy_cck(dev, 0x49, 0x0a);
-	rtl8225_write_phy_cck(dev, 0x4a, 0x05);
-	rtl8225_write_phy_cck(dev, 0x4b, 0x02);
-	rtl8225_write_phy_cck(dev, 0x4c, 0x05);
-
-	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
-
-	rtl8225_rf_set_tx_power(dev, 1);
-
-	/* RX antenna default to A */
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b);			/* B: 0xDB */
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);		/* B: 0x10 */
-
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
-	msleep(1);
-	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
-
-	/* set sensitivity */
-	rtl8225_write(dev, 0x0c, 0x50);
-	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
-	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
-	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
-	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
-	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
-}
-
-static const u8 rtl8225z2_agc[] = {
-	0x5e, 0x5e, 0x5e, 0x5e, 0x5d, 0x5b, 0x59, 0x57, 0x55, 0x53, 0x51, 0x4f,
-	0x4d, 0x4b, 0x49, 0x47, 0x45, 0x43, 0x41, 0x3f, 0x3d, 0x3b, 0x39, 0x37,
-	0x35, 0x33, 0x31, 0x2f, 0x2d, 0x2b, 0x29, 0x27, 0x25, 0x23, 0x21, 0x1f,
-	0x1d, 0x1b, 0x19, 0x17, 0x15, 0x13, 0x11, 0x0f, 0x0d, 0x0b, 0x09, 0x07,
-	0x05, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
-	0x19, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28,
-	0x28, 0x29, 0x2a, 0x2a, 0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d,
-	0x2d, 0x2d, 0x2d, 0x2e, 0x2e, 0x2e, 0x2e, 0x2f, 0x2f, 0x2f, 0x30, 0x30,
-	0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
-	0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31
-};
-static const u8 rtl8225z2_ofdm[] = {
-	0x10, 0x0d, 0x01, 0x00, 0x14, 0xfb, 0xfb, 0x60,
-	0x00, 0x60, 0x00, 0x00, 0x00, 0x5c, 0x00, 0x00,
-	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xa8, 0x26,
-	0x32, 0x33, 0x07, 0xa5, 0x6f, 0x55, 0xc8, 0xb3,
-	0x0a, 0xe1, 0x2C, 0x8a, 0x86, 0x83, 0x34, 0x0f,
-	0x4f, 0x24, 0x6f, 0xc2, 0x6b, 0x40, 0x80, 0x00,
-	0xc0, 0xc1, 0x58, 0xf1, 0x00, 0xe4, 0x90, 0x3e,
-	0x6d, 0x3c, 0xfb, 0x07
-};
-
-static const u8 rtl8225z2_tx_power_cck_ch14[] = {
-	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00,
-	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
-	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
-	0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225z2_tx_power_cck[] = {
-	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04,
-	0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03,
-	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03,
-	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03
-};
-
-static const u8 rtl8225z2_tx_power_ofdm[] = {
-	0x42, 0x00, 0x40, 0x00, 0x40
-};
-
-static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
-	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
-	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
-	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
-	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
-	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
-};
-
-static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-	const u8 *tmp;
-	u32 reg;
-	int i;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xF;
-	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
-
-	cck_power = min(cck_power, (u8)15);
-	cck_power += priv->txpwr_base & 0xF;
-	cck_power = min(cck_power, (u8)35);
-
-	if (ofdm_power > (u8)15)
-		ofdm_power = 25;
-	else
-		ofdm_power += 10;
-	ofdm_power += priv->txpwr_base >> 4;
-	ofdm_power = min(ofdm_power, (u8)35);
-
-	if (channel == 14)
-		tmp = rtl8225z2_tx_power_cck_ch14;
-	else
-		tmp = rtl8225z2_tx_power_cck;
-
-	for (i = 0; i < 8; i++)
-		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
-			 rtl8225z2_tx_gain_cck_ofdm[cck_power]);
-	msleep(1);
-
-	/* anaparam2 on */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-			  RTL8187_RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl8225_write_phy_ofdm(dev, 2, 0x42);
-	rtl8225_write_phy_ofdm(dev, 5, 0x00);
-	rtl8225_write_phy_ofdm(dev, 6, 0x40);
-	rtl8225_write_phy_ofdm(dev, 7, 0x00);
-	rtl8225_write_phy_ofdm(dev, 8, 0x40);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
-			 rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
-	msleep(1);
-}
-
-static void rtl8225z2_b_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 cck_power, ofdm_power;
-	const u8 *tmp;
-	int i;
-
-	cck_power = priv->channels[channel - 1].hw_value & 0xF;
-	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
-
-	if (cck_power > 15)
-		cck_power = (priv->hw_rev == RTL8187BvB) ? 15 : 22;
-	else
-		cck_power += (priv->hw_rev == RTL8187BvB) ? 0 : 7;
-	cck_power += priv->txpwr_base & 0xF;
-	cck_power = min(cck_power, (u8)35);
-
-	if (ofdm_power > 15)
-		ofdm_power = (priv->hw_rev == RTL8187BvB) ? 17 : 25;
-	else
-		ofdm_power += (priv->hw_rev == RTL8187BvB) ? 2 : 10;
-	ofdm_power += (priv->txpwr_base >> 4) & 0xF;
-	ofdm_power = min(ofdm_power, (u8)35);
-
-	if (channel == 14)
-		tmp = rtl8225z2_tx_power_cck_ch14;
-	else
-		tmp = rtl8225z2_tx_power_cck;
-
-	if (priv->hw_rev == RTL8187BvB) {
-		if (cck_power <= 6)
-			; /* do nothing */
-		else if (cck_power <= 11)
-			tmp += 8;
-		else
-			tmp += 16;
-	} else {
-		if (cck_power <= 5)
-			; /* do nothing */
-		else if (cck_power <= 11)
-			tmp += 8;
-		else if (cck_power <= 17)
-			tmp += 16;
-		else
-			tmp += 24;
-	}
-
-	for (i = 0; i < 8; i++)
-		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
-			 rtl8225z2_tx_gain_cck_ofdm[cck_power] << 1);
-	msleep(1);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
-			 rtl8225z2_tx_gain_cck_ofdm[ofdm_power] << 1);
-	if (priv->hw_rev == RTL8187BvB) {
-		if (ofdm_power <= 11) {
-			rtl8225_write_phy_ofdm(dev, 0x87, 0x60);
-			rtl8225_write_phy_ofdm(dev, 0x89, 0x60);
-		} else {
-			rtl8225_write_phy_ofdm(dev, 0x87, 0x5c);
-			rtl8225_write_phy_ofdm(dev, 0x89, 0x5c);
-		}
-	} else {
-		if (ofdm_power <= 11) {
-			rtl8225_write_phy_ofdm(dev, 0x87, 0x5c);
-			rtl8225_write_phy_ofdm(dev, 0x89, 0x5c);
-		} else if (ofdm_power <= 17) {
-			rtl8225_write_phy_ofdm(dev, 0x87, 0x54);
-			rtl8225_write_phy_ofdm(dev, 0x89, 0x54);
-		} else {
-			rtl8225_write_phy_ofdm(dev, 0x87, 0x50);
-			rtl8225_write_phy_ofdm(dev, 0x89, 0x50);
-		}
-	}
-	msleep(1);
-}
-
-static const u16 rtl8225z2_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
-};
-
-static const u8 rtl8225z2_gain_bg[] = {
-	0x23, 0x15, 0xa5, /* -82-1dBm */
-	0x23, 0x15, 0xb5, /* -82-2dBm */
-	0x23, 0x15, 0xc5, /* -82-3dBm */
-	0x33, 0x15, 0xc5, /* -78dBm */
-	0x43, 0x15, 0xc5, /* -74dBm */
-	0x53, 0x15, 0xc5, /* -70dBm */
-	0x63, 0x15, 0xc5  /* -66dBm */
-};
-
-static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-
-	rtl8225_write(dev, 0x0, 0x2BF);
-	rtl8225_write(dev, 0x1, 0xEE0);
-	rtl8225_write(dev, 0x2, 0x44D);
-	rtl8225_write(dev, 0x3, 0x441);
-	rtl8225_write(dev, 0x4, 0x8C3);
-	rtl8225_write(dev, 0x5, 0xC72);
-	rtl8225_write(dev, 0x6, 0x0E6);
-	rtl8225_write(dev, 0x7, 0x82A);
-	rtl8225_write(dev, 0x8, 0x03F);
-	rtl8225_write(dev, 0x9, 0x335);
-	rtl8225_write(dev, 0xa, 0x9D4);
-	rtl8225_write(dev, 0xb, 0x7BB);
-	rtl8225_write(dev, 0xc, 0x850);
-	rtl8225_write(dev, 0xd, 0xCDF);
-	rtl8225_write(dev, 0xe, 0x02B);
-	rtl8225_write(dev, 0xf, 0x114);
-	msleep(100);
-
-	rtl8225_write(dev, 0x0, 0x1B7);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
-		rtl8225_write(dev, 0x1, i + 1);
-		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
-	}
-
-	rtl8225_write(dev, 0x3, 0x080);
-	rtl8225_write(dev, 0x5, 0x004);
-	rtl8225_write(dev, 0x0, 0x0B7);
-	rtl8225_write(dev, 0x2, 0xc4D);
-
-	msleep(200);
-	rtl8225_write(dev, 0x2, 0x44D);
-	msleep(100);
-
-	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
-		rtl8225_write(dev, 0x02, 0x0C4D);
-		msleep(200);
-		rtl8225_write(dev, 0x02, 0x044D);
-		msleep(100);
-		if (!(rtl8225_read(dev, 6) & (1 << 7)))
-			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
-				   rtl8225_read(dev, 6));
-	}
-
-	msleep(200);
-
-	rtl8225_write(dev, 0x0, 0x2BF);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
-		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
-	}
-
-	msleep(1);
-
-	rtl8225_write_phy_ofdm(dev, 0x00, 0x01);
-	rtl8225_write_phy_ofdm(dev, 0x01, 0x02);
-	rtl8225_write_phy_ofdm(dev, 0x02, 0x42);
-	rtl8225_write_phy_ofdm(dev, 0x03, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x04, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x05, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x06, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x07, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x08, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe);
-	rtl8225_write_phy_ofdm(dev, 0x0a, 0x08);
-	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80);
-	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01);
-	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
-	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3);
-	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38);
-	rtl8225_write_phy_ofdm(dev, 0x10, 0x84);
-	rtl8225_write_phy_ofdm(dev, 0x11, 0x07);
-	rtl8225_write_phy_ofdm(dev, 0x12, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x13, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x14, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x15, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x16, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x17, 0x40);
-	rtl8225_write_phy_ofdm(dev, 0x18, 0xef);
-	rtl8225_write_phy_ofdm(dev, 0x19, 0x19);
-	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20);
-	rtl8225_write_phy_ofdm(dev, 0x1b, 0x15);
-	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04);
-	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5);
-	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95);
-	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75);
-	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f);
-	rtl8225_write_phy_ofdm(dev, 0x21, 0x17);
-	rtl8225_write_phy_ofdm(dev, 0x22, 0x16);
-	rtl8225_write_phy_ofdm(dev, 0x23, 0x80);
-	rtl8225_write_phy_ofdm(dev, 0x24, 0x46);
-	rtl8225_write_phy_ofdm(dev, 0x25, 0x00);
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);
-	rtl8225_write_phy_ofdm(dev, 0x27, 0x88);
-
-	rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
-	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
-	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
-	rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
-
-	rtl8225_write_phy_cck(dev, 0x00, 0x98);
-	rtl8225_write_phy_cck(dev, 0x03, 0x20);
-	rtl8225_write_phy_cck(dev, 0x04, 0x7e);
-	rtl8225_write_phy_cck(dev, 0x05, 0x12);
-	rtl8225_write_phy_cck(dev, 0x06, 0xfc);
-	rtl8225_write_phy_cck(dev, 0x07, 0x78);
-	rtl8225_write_phy_cck(dev, 0x08, 0x2e);
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b);
-	rtl8225_write_phy_cck(dev, 0x11, 0x88);
-	rtl8225_write_phy_cck(dev, 0x12, 0x47);
-	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
-	rtl8225_write_phy_cck(dev, 0x19, 0x00);
-	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
-	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
-	rtl8225_write_phy_cck(dev, 0x40, 0x86);
-	rtl8225_write_phy_cck(dev, 0x41, 0x8d);
-	rtl8225_write_phy_cck(dev, 0x42, 0x15);
-	rtl8225_write_phy_cck(dev, 0x43, 0x18);
-	rtl8225_write_phy_cck(dev, 0x44, 0x36);
-	rtl8225_write_phy_cck(dev, 0x45, 0x35);
-	rtl8225_write_phy_cck(dev, 0x46, 0x2e);
-	rtl8225_write_phy_cck(dev, 0x47, 0x25);
-	rtl8225_write_phy_cck(dev, 0x48, 0x1c);
-	rtl8225_write_phy_cck(dev, 0x49, 0x12);
-	rtl8225_write_phy_cck(dev, 0x4a, 0x09);
-	rtl8225_write_phy_cck(dev, 0x4b, 0x04);
-	rtl8225_write_phy_cck(dev, 0x4c, 0x05);
-
-	rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1);
-
-	rtl8225z2_rf_set_tx_power(dev, 1);
-
-	/* RX antenna default to A */
-	rtl8225_write_phy_cck(dev, 0x10, 0x9b);			/* B: 0xDB */
-	rtl8225_write_phy_ofdm(dev, 0x26, 0x90);		/* B: 0x10 */
-
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
-	msleep(1);
-	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
-}
-
-static void rtl8225z2_b_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-
-	rtl8225_write(dev, 0x0, 0x0B7);
-	rtl8225_write(dev, 0x1, 0xEE0);
-	rtl8225_write(dev, 0x2, 0x44D);
-	rtl8225_write(dev, 0x3, 0x441);
-	rtl8225_write(dev, 0x4, 0x8C3);
-	rtl8225_write(dev, 0x5, 0xC72);
-	rtl8225_write(dev, 0x6, 0x0E6);
-	rtl8225_write(dev, 0x7, 0x82A);
-	rtl8225_write(dev, 0x8, 0x03F);
-	rtl8225_write(dev, 0x9, 0x335);
-	rtl8225_write(dev, 0xa, 0x9D4);
-	rtl8225_write(dev, 0xb, 0x7BB);
-	rtl8225_write(dev, 0xc, 0x850);
-	rtl8225_write(dev, 0xd, 0xCDF);
-	rtl8225_write(dev, 0xe, 0x02B);
-	rtl8225_write(dev, 0xf, 0x114);
-
-	rtl8225_write(dev, 0x0, 0x1B7);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
-		rtl8225_write(dev, 0x1, i + 1);
-		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
-	}
-
-	rtl8225_write(dev, 0x3, 0x080);
-	rtl8225_write(dev, 0x5, 0x004);
-	rtl8225_write(dev, 0x0, 0x0B7);
-
-	rtl8225_write(dev, 0x2, 0xC4D);
-
-	rtl8225_write(dev, 0x2, 0x44D);
-	rtl8225_write(dev, 0x0, 0x2BF);
-
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x03);
-	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x07);
-	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
-
-	rtl8225_write_phy_ofdm(dev, 0x80, 0x12);
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_agc); i++) {
-		rtl8225_write_phy_ofdm(dev, 0xF, rtl8225z2_agc[i]);
-		rtl8225_write_phy_ofdm(dev, 0xE, 0x80 + i);
-		rtl8225_write_phy_ofdm(dev, 0xE, 0);
-	}
-	rtl8225_write_phy_ofdm(dev, 0x80, 0x10);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_ofdm); i++)
-		rtl8225_write_phy_ofdm(dev, i, rtl8225z2_ofdm[i]);
-
-	rtl8225_write_phy_ofdm(dev, 0x97, 0x46);
-	rtl8225_write_phy_ofdm(dev, 0xa4, 0xb6);
-	rtl8225_write_phy_ofdm(dev, 0x85, 0xfc);
-	rtl8225_write_phy_cck(dev, 0xc1, 0x88);
-}
-
-static void rtl8225_rf_stop(struct ieee80211_hw *dev)
-{
-	rtl8225_write(dev, 0x4, 0x1f);
-}
-
-static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
-				   struct ieee80211_conf *conf)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int chan =
-		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
-
-	if (priv->rf->init == rtl8225_rf_init)
-		rtl8225_rf_set_tx_power(dev, chan);
-	else if (priv->rf->init == rtl8225z2_rf_init)
-		rtl8225z2_rf_set_tx_power(dev, chan);
-	else
-		rtl8225z2_b_rf_set_tx_power(dev, chan);
-
-	rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]);
-	msleep(10);
-}
-
-static const struct rtl818x_rf_ops rtl8225_ops = {
-	.name		= "rtl8225",
-	.init		= rtl8225_rf_init,
-	.stop		= rtl8225_rf_stop,
-	.set_chan	= rtl8225_rf_set_channel
-};
-
-static const struct rtl818x_rf_ops rtl8225z2_ops = {
-	.name		= "rtl8225z2",
-	.init		= rtl8225z2_rf_init,
-	.stop		= rtl8225_rf_stop,
-	.set_chan	= rtl8225_rf_set_channel
-};
-
-static const struct rtl818x_rf_ops rtl8225z2_b_ops = {
-	.name		= "rtl8225z2",
-	.init		= rtl8225z2_b_rf_init,
-	.stop		= rtl8225_rf_stop,
-	.set_chan	= rtl8225_rf_set_channel
-};
-
-const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *dev)
-{
-	u16 reg8, reg9;
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (!priv->is_rtl8187b) {
-		rtl8225_write(dev, 0, 0x1B7);
-
-		reg8 = rtl8225_read(dev, 8);
-		reg9 = rtl8225_read(dev, 9);
-
-		rtl8225_write(dev, 0, 0x0B7);
-
-		if (reg8 != 0x588 || reg9 != 0x700)
-			return &rtl8225_ops;
-
-		return &rtl8225z2_ops;
-	} else
-		return &rtl8225z2_b_ops;
-}
diff --git a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h b/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
deleted file mode 100644
index 141afb09a..000000000
--- a/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Radio tuning definitions for RTL8225 on RTL8187
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef RTL8187_RTL8225_H
-#define RTL8187_RTL8225_H
-
-#define RTL8187_RTL8225_ANAPARAM_ON	0xa0000a59
-#define RTL8187_RTL8225_ANAPARAM2_ON	0x860c7312
-#define RTL8187_RTL8225_ANAPARAM_OFF	0xa00beb59
-#define RTL8187_RTL8225_ANAPARAM2_OFF	0x840dec11
-
-#define RTL8187B_RTL8225_ANAPARAM_ON	0x45090658
-#define RTL8187B_RTL8225_ANAPARAM2_ON	0x727f3f52
-#define RTL8187B_RTL8225_ANAPARAM3_ON	0x00
-#define RTL8187B_RTL8225_ANAPARAM_OFF	0x55480658
-#define RTL8187B_RTL8225_ANAPARAM2_OFF	0x72003f50
-#define RTL8187B_RTL8225_ANAPARAM3_OFF	0x00
-
-const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *);
-
-static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
-					  u8 addr, u32 data)
-{
-	rtl8187_write_phy(dev, addr, data);
-}
-
-static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
-					 u8 addr, u32 data)
-{
-	rtl8187_write_phy(dev, addr, data | 0x10000);
-}
-
-#endif /* RTL8187_RTL8225_H */
-- 
cgit 1.2.3-korg