From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/net/wireless/cw1200/Kconfig | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 kernel/drivers/net/wireless/cw1200/Kconfig (limited to 'kernel/drivers/net/wireless/cw1200/Kconfig') diff --git a/kernel/drivers/net/wireless/cw1200/Kconfig b/kernel/drivers/net/wireless/cw1200/Kconfig new file mode 100644 index 000000000..0880742ea --- /dev/null +++ b/kernel/drivers/net/wireless/cw1200/Kconfig @@ -0,0 +1,30 @@ +config CW1200 + tristate "CW1200 WLAN support" + depends on MAC80211 && CFG80211 + help + This is a driver for the ST-E CW1100 & CW1200 WLAN chipsets. + This option just enables the driver core, see below for + specific bus support. + +if CW1200 + +config CW1200_WLAN_SDIO + tristate "Support SDIO platforms" + depends on CW1200 && MMC + help + Enable support for the CW1200 connected via an SDIO bus. + By default this driver only supports the Sagrad SG901-1091/1098 EVK + and similar designs that utilize a hardware reset circuit. To + support different CW1200 SDIO designs you will need to override + the default platform data by calling cw1200_sdio_set_platform_data() + in your board setup file. + +config CW1200_WLAN_SPI + tristate "Support SPI platforms" + depends on CW1200 && SPI + help + Enables support for the CW1200 connected via a SPI bus. You will + need to add appropriate platform data glue in your board setup + file. + +endif -- cgit 1.2.3-korg