From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/drivers/net/phy/Kconfig | 73 +- kernel/drivers/net/phy/Makefile | 9 +- kernel/drivers/net/phy/amd-xgbe-phy.c | 1901 ----------------------------- kernel/drivers/net/phy/aquantia.c | 188 +++ kernel/drivers/net/phy/at803x.c | 4 + kernel/drivers/net/phy/bcm-cygnus.c | 158 +++ kernel/drivers/net/phy/bcm-phy-lib.c | 213 ++++ kernel/drivers/net/phy/bcm-phy-lib.h | 37 + kernel/drivers/net/phy/bcm63xx.c | 38 +- kernel/drivers/net/phy/bcm7xxx.c | 146 +-- kernel/drivers/net/phy/broadcom.c | 151 +-- kernel/drivers/net/phy/davicom.c | 13 + kernel/drivers/net/phy/dp83640.c | 91 +- kernel/drivers/net/phy/dp83848.c | 99 ++ kernel/drivers/net/phy/dp83867.c | 235 ++++ kernel/drivers/net/phy/fixed_phy.c | 121 +- kernel/drivers/net/phy/icplus.c | 5 +- kernel/drivers/net/phy/marvell.c | 88 +- kernel/drivers/net/phy/mdio-bcm-iproc.c | 213 ++++ kernel/drivers/net/phy/mdio-bcm-unimac.c | 52 +- kernel/drivers/net/phy/mdio-bitbang.c | 7 +- kernel/drivers/net/phy/mdio-gpio.c | 4 +- kernel/drivers/net/phy/mdio-mux-gpio.c | 3 +- kernel/drivers/net/phy/mdio-mux-mmioreg.c | 2 + kernel/drivers/net/phy/mdio-mux.c | 27 +- kernel/drivers/net/phy/mdio-octeon.c | 136 ++- kernel/drivers/net/phy/mdio_bus.c | 107 +- kernel/drivers/net/phy/micrel.c | 89 +- kernel/drivers/net/phy/microchip.c | 148 +++ kernel/drivers/net/phy/phy.c | 79 +- kernel/drivers/net/phy/phy_device.c | 203 ++- kernel/drivers/net/phy/realtek.c | 82 +- kernel/drivers/net/phy/smsc.c | 50 +- kernel/drivers/net/phy/spi_ks8995.c | 23 - kernel/drivers/net/phy/teranetics.c | 122 ++ kernel/drivers/net/phy/vitesse.c | 16 +- 36 files changed, 2521 insertions(+), 2412 deletions(-) delete mode 100644 kernel/drivers/net/phy/amd-xgbe-phy.c create mode 100644 kernel/drivers/net/phy/aquantia.c create mode 100644 kernel/drivers/net/phy/bcm-cygnus.c create mode 100644 kernel/drivers/net/phy/bcm-phy-lib.c create mode 100644 kernel/drivers/net/phy/bcm-phy-lib.h create mode 100644 kernel/drivers/net/phy/dp83848.c create mode 100644 kernel/drivers/net/phy/dp83867.c create mode 100644 kernel/drivers/net/phy/mdio-bcm-iproc.c create mode 100644 kernel/drivers/net/phy/microchip.c create mode 100644 kernel/drivers/net/phy/teranetics.c (limited to 'kernel/drivers/net/phy') diff --git a/kernel/drivers/net/phy/Kconfig b/kernel/drivers/net/phy/Kconfig index 70641d2c0..60994a83a 100644 --- a/kernel/drivers/net/phy/Kconfig +++ b/kernel/drivers/net/phy/Kconfig @@ -14,6 +14,11 @@ if PHYLIB comment "MII PHY device drivers" +config AQUANTIA_PHY + tristate "Drivers for the Aquantia PHYs" + ---help--- + Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 + config AT803X_PHY tristate "Drivers for Atheros AT803X PHYs" ---help--- @@ -24,13 +29,6 @@ config AMD_PHY ---help--- Currently supports the am79c874 -config AMD_XGBE_PHY - tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" - depends on (OF || ACPI) && HAS_IOMEM - depends on ARM64 || COMPILE_TEST - ---help--- - Currently supports the AMD 10GbE PHY - config MARVELL_PHY tristate "Drivers for Marvell PHYs" ---help--- @@ -61,25 +59,49 @@ config VITESSE_PHY ---help--- Currently supports the vsc8244 +config TERANETICS_PHY + tristate "Drivers for the Teranetics PHYs" + ---help--- + Currently supports the Teranetics TN2020 + config SMSC_PHY tristate "Drivers for SMSC PHYs" ---help--- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs +config BCM_NET_PHYLIB + tristate + config BROADCOM_PHY tristate "Drivers for Broadcom PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481 and BCM5482 PHYs. +config BCM_CYGNUS_PHY + tristate "Drivers for Broadcom Cygnus SoC internal PHY" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + depends on MDIO_BCM_IPROC + select BCM_NET_PHYLIB + ---help--- + This PHY driver is for the 1G internal PHYs of the Broadcom + Cygnus Family SoC. + + Currently supports internal PHY's used in the BCM11300, + BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, + BCM58303 & BCM58305 Broadcom Cygnus SoCs. + config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" depends on BCM63XX + select BCM_NET_PHYLIB ---help--- Currently supports the 6348 and 6358 PHYs. config BCM7XXX_PHY tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM7366, BCM7439, BCM7445, and 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. @@ -119,6 +141,21 @@ config MICREL_PHY ---help--- Supports the KSZ9021, VSC8201, KS8001 PHYs. +config DP83848_PHY + tristate "Driver for Texas Instruments DP83848 PHY" + ---help--- + Supports the DP83848 PHY. + +config DP83867_PHY + tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" + ---help--- + Currently supports the DP83867 PHY. + +config MICROCHIP_PHY + tristate "Drivers for Microchip PHYs" + help + Supports the LAN88XX PHYs. + config FIXED_PHY tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" depends on PHYLIB @@ -147,15 +184,13 @@ config MDIO_GPIO will be called mdio-gpio. config MDIO_OCTEON - tristate "Support for MDIO buses on Octeon SOCs" - depends on CAVIUM_OCTEON_SOC - default y + tristate "Support for MDIO buses on Octeon and ThunderX SOCs" + depends on 64BIT help - This module provides a driver for the Octeon MDIO busses. - It is required by the Octeon Ethernet device drivers. - - If in doubt, say Y. + This module provides a driver for the Octeon and ThunderX MDIO + busses. It is required by the Octeon and ThunderX ethernet device + drivers. config MDIO_SUN4I tristate "Allwinner sun4i MDIO interface support" @@ -193,7 +228,7 @@ config MDIO_BUS_MUX_GPIO config MDIO_BUS_MUX_MMIOREG tristate "Support for MMIO device-controlled MDIO bus multiplexers" - depends on OF_MDIO + depends on OF_MDIO && HAS_IOMEM select MDIO_BUS_MUX help This module provides a driver for MDIO bus multiplexers that @@ -213,6 +248,14 @@ config MDIO_BCM_UNIMAC controllers as well as some Broadcom Ethernet switches such as the Starfighter 2 switches. +config MDIO_BCM_IPROC + tristate "Broadcom iProc MDIO bus controller" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF_MDIO + help + This module provides a driver for the MDIO busses found in the + Broadcom iProc SoC's. + endif # PHYLIB config MICREL_KS8995MA diff --git a/kernel/drivers/net/phy/Makefile b/kernel/drivers/net/phy/Makefile index 501ea7699..f31a4e25c 100644 --- a/kernel/drivers/net/phy/Makefile +++ b/kernel/drivers/net/phy/Makefile @@ -3,17 +3,21 @@ libphy-objs := phy.o phy_device.o mdio_bus.o obj-$(CONFIG_PHYLIB) += libphy.o +obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_CICADA_PHY) += cicada.o obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o +obj-$(CONFIG_TERANETICS_PHY) += teranetics.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o +obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o @@ -22,6 +26,8 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_DP83640_PHY) += dp83640.o +obj-$(CONFIG_DP83848_PHY) += dp83848.o +obj-$(CONFIG_DP83867_PHY) += dp83867.o obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o @@ -33,5 +39,6 @@ obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o -obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o +obj-$(CONFIG_MICROCHIP_PHY) += microchip.o +obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o diff --git a/kernel/drivers/net/phy/amd-xgbe-phy.c b/kernel/drivers/net/phy/amd-xgbe-phy.c deleted file mode 100644 index 34a75cba3..000000000 --- a/kernel/drivers/net/phy/amd-xgbe-phy.c +++ /dev/null @@ -1,1901 +0,0 @@ -/* - * AMD 10Gb Ethernet PHY driver - * - * This file is available to you under your choice of the following two - * licenses: - * - * License 1: GPLv2 - * - * Copyright (c) 2014 Advanced Micro Devices, Inc. - * - * This file is free software; you may copy, redistribute and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or (at - * your option) any later version. - * - * This file is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - * - * License 2: Modified BSD - * - * Copyright (c) 2014 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_AUTHOR("Tom Lendacky "); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION("1.0.0-a"); -MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); - -#define XGBE_PHY_ID 0x000162d0 -#define XGBE_PHY_MASK 0xfffffff0 - -#define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set" -#define XGBE_PHY_BLWC_PROPERTY "amd,serdes-blwc" -#define XGBE_PHY_CDR_RATE_PROPERTY "amd,serdes-cdr-rate" -#define XGBE_PHY_PQ_SKEW_PROPERTY "amd,serdes-pq-skew" -#define XGBE_PHY_TX_AMP_PROPERTY "amd,serdes-tx-amp" -#define XGBE_PHY_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config" -#define XGBE_PHY_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable" - -#define XGBE_PHY_SPEEDS 3 -#define XGBE_PHY_SPEED_1000 0 -#define XGBE_PHY_SPEED_2500 1 -#define XGBE_PHY_SPEED_10000 2 - -#define XGBE_AN_MS_TIMEOUT 500 - -#define XGBE_AN_INT_CMPLT 0x01 -#define XGBE_AN_INC_LINK 0x02 -#define XGBE_AN_PG_RCV 0x04 -#define XGBE_AN_INT_MASK 0x07 - -#define XNP_MCF_NULL_MESSAGE 0x001 -#define XNP_ACK_PROCESSED BIT(12) -#define XNP_MP_FORMATTED BIT(13) -#define XNP_NP_EXCHANGE BIT(15) - -#define XGBE_PHY_RATECHANGE_COUNT 500 - -#define XGBE_PHY_KR_TRAINING_START 0x01 -#define XGBE_PHY_KR_TRAINING_ENABLE 0x02 - -#define XGBE_PHY_FEC_ENABLE 0x01 -#define XGBE_PHY_FEC_FORWARD 0x02 -#define XGBE_PHY_FEC_MASK 0x03 - -#ifndef MDIO_PMA_10GBR_PMD_CTRL -#define MDIO_PMA_10GBR_PMD_CTRL 0x0096 -#endif - -#ifndef MDIO_PMA_10GBR_FEC_ABILITY -#define MDIO_PMA_10GBR_FEC_ABILITY 0x00aa -#endif - -#ifndef MDIO_PMA_10GBR_FEC_CTRL -#define MDIO_PMA_10GBR_FEC_CTRL 0x00ab -#endif - -#ifndef MDIO_AN_XNP -#define MDIO_AN_XNP 0x0016 -#endif - -#ifndef MDIO_AN_LPX -#define MDIO_AN_LPX 0x0019 -#endif - -#ifndef MDIO_AN_INTMASK -#define MDIO_AN_INTMASK 0x8001 -#endif - -#ifndef MDIO_AN_INT -#define MDIO_AN_INT 0x8002 -#endif - -#ifndef MDIO_CTRL1_SPEED1G -#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100) -#endif - -/* SerDes integration register offsets */ -#define SIR0_KR_RT_1 0x002c -#define SIR0_STATUS 0x0040 -#define SIR1_SPEED 0x0000 - -/* SerDes integration register entry bit positions and sizes */ -#define SIR0_KR_RT_1_RESET_INDEX 11 -#define SIR0_KR_RT_1_RESET_WIDTH 1 -#define SIR0_STATUS_RX_READY_INDEX 0 -#define SIR0_STATUS_RX_READY_WIDTH 1 -#define SIR0_STATUS_TX_READY_INDEX 8 -#define SIR0_STATUS_TX_READY_WIDTH 1 -#define SIR1_SPEED_CDR_RATE_INDEX 12 -#define SIR1_SPEED_CDR_RATE_WIDTH 4 -#define SIR1_SPEED_DATARATE_INDEX 4 -#define SIR1_SPEED_DATARATE_WIDTH 2 -#define SIR1_SPEED_PLLSEL_INDEX 3 -#define SIR1_SPEED_PLLSEL_WIDTH 1 -#define SIR1_SPEED_RATECHANGE_INDEX 6 -#define SIR1_SPEED_RATECHANGE_WIDTH 1 -#define SIR1_SPEED_TXAMP_INDEX 8 -#define SIR1_SPEED_TXAMP_WIDTH 4 -#define SIR1_SPEED_WORDMODE_INDEX 0 -#define SIR1_SPEED_WORDMODE_WIDTH 3 - -#define SPEED_10000_BLWC 0 -#define SPEED_10000_CDR 0x7 -#define SPEED_10000_PLL 0x1 -#define SPEED_10000_PQ 0x12 -#define SPEED_10000_RATE 0x0 -#define SPEED_10000_TXAMP 0xa -#define SPEED_10000_WORD 0x7 -#define SPEED_10000_DFE_TAP_CONFIG 0x1 -#define SPEED_10000_DFE_TAP_ENABLE 0x7f - -#define SPEED_2500_BLWC 1 -#define SPEED_2500_CDR 0x2 -#define SPEED_2500_PLL 0x0 -#define SPEED_2500_PQ 0xa -#define SPEED_2500_RATE 0x1 -#define SPEED_2500_TXAMP 0xf -#define SPEED_2500_WORD 0x1 -#define SPEED_2500_DFE_TAP_CONFIG 0x3 -#define SPEED_2500_DFE_TAP_ENABLE 0x0 - -#define SPEED_1000_BLWC 1 -#define SPEED_1000_CDR 0x2 -#define SPEED_1000_PLL 0x0 -#define SPEED_1000_PQ 0xa -#define SPEED_1000_RATE 0x3 -#define SPEED_1000_TXAMP 0xf -#define SPEED_1000_WORD 0x1 -#define SPEED_1000_DFE_TAP_CONFIG 0x3 -#define SPEED_1000_DFE_TAP_ENABLE 0x0 - -/* SerDes RxTx register offsets */ -#define RXTX_REG6 0x0018 -#define RXTX_REG20 0x0050 -#define RXTX_REG22 0x0058 -#define RXTX_REG114 0x01c8 -#define RXTX_REG129 0x0204 - -/* SerDes RxTx register entry bit positions and sizes */ -#define RXTX_REG6_RESETB_RXD_INDEX 8 -#define RXTX_REG6_RESETB_RXD_WIDTH 1 -#define RXTX_REG20_BLWC_ENA_INDEX 2 -#define RXTX_REG20_BLWC_ENA_WIDTH 1 -#define RXTX_REG114_PQ_REG_INDEX 9 -#define RXTX_REG114_PQ_REG_WIDTH 7 -#define RXTX_REG129_RXDFE_CONFIG_INDEX 14 -#define RXTX_REG129_RXDFE_CONFIG_WIDTH 2 - -/* Bit setting and getting macros - * The get macro will extract the current bit field value from within - * the variable - * - * The set macro will clear the current bit field value within the - * variable and then set the bit field of the variable to the - * specified value - */ -#define GET_BITS(_var, _index, _width) \ - (((_var) >> (_index)) & ((0x1 << (_width)) - 1)) - -#define SET_BITS(_var, _index, _width, _val) \ -do { \ - (_var) &= ~(((0x1 << (_width)) - 1) << (_index)); \ - (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ -} while (0) - -#define XSIR_GET_BITS(_var, _prefix, _field) \ - GET_BITS((_var), \ - _prefix##_##_field##_INDEX, \ - _prefix##_##_field##_WIDTH) - -#define XSIR_SET_BITS(_var, _prefix, _field, _val) \ - SET_BITS((_var), \ - _prefix##_##_field##_INDEX, \ - _prefix##_##_field##_WIDTH, (_val)) - -/* Macros for reading or writing SerDes integration registers - * The ioread macros will get bit fields or full values using the - * register definitions formed using the input names - * - * The iowrite macros will set bit fields or full values using the - * register definitions formed using the input names - */ -#define XSIR0_IOREAD(_priv, _reg) \ - ioread16((_priv)->sir0_regs + _reg) - -#define XSIR0_IOREAD_BITS(_priv, _reg, _field) \ - GET_BITS(XSIR0_IOREAD((_priv), _reg), \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH) - -#define XSIR0_IOWRITE(_priv, _reg, _val) \ - iowrite16((_val), (_priv)->sir0_regs + _reg) - -#define XSIR0_IOWRITE_BITS(_priv, _reg, _field, _val) \ -do { \ - u16 reg_val = XSIR0_IOREAD((_priv), _reg); \ - SET_BITS(reg_val, \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH, (_val)); \ - XSIR0_IOWRITE((_priv), _reg, reg_val); \ -} while (0) - -#define XSIR1_IOREAD(_priv, _reg) \ - ioread16((_priv)->sir1_regs + _reg) - -#define XSIR1_IOREAD_BITS(_priv, _reg, _field) \ - GET_BITS(XSIR1_IOREAD((_priv), _reg), \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH) - -#define XSIR1_IOWRITE(_priv, _reg, _val) \ - iowrite16((_val), (_priv)->sir1_regs + _reg) - -#define XSIR1_IOWRITE_BITS(_priv, _reg, _field, _val) \ -do { \ - u16 reg_val = XSIR1_IOREAD((_priv), _reg); \ - SET_BITS(reg_val, \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH, (_val)); \ - XSIR1_IOWRITE((_priv), _reg, reg_val); \ -} while (0) - -/* Macros for reading or writing SerDes RxTx registers - * The ioread macros will get bit fields or full values using the - * register definitions formed using the input names - * - * The iowrite macros will set bit fields or full values using the - * register definitions formed using the input names - */ -#define XRXTX_IOREAD(_priv, _reg) \ - ioread16((_priv)->rxtx_regs + _reg) - -#define XRXTX_IOREAD_BITS(_priv, _reg, _field) \ - GET_BITS(XRXTX_IOREAD((_priv), _reg), \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH) - -#define XRXTX_IOWRITE(_priv, _reg, _val) \ - iowrite16((_val), (_priv)->rxtx_regs + _reg) - -#define XRXTX_IOWRITE_BITS(_priv, _reg, _field, _val) \ -do { \ - u16 reg_val = XRXTX_IOREAD((_priv), _reg); \ - SET_BITS(reg_val, \ - _reg##_##_field##_INDEX, \ - _reg##_##_field##_WIDTH, (_val)); \ - XRXTX_IOWRITE((_priv), _reg, reg_val); \ -} while (0) - -static const u32 amd_xgbe_phy_serdes_blwc[] = { - SPEED_1000_BLWC, - SPEED_2500_BLWC, - SPEED_10000_BLWC, -}; - -static const u32 amd_xgbe_phy_serdes_cdr_rate[] = { - SPEED_1000_CDR, - SPEED_2500_CDR, - SPEED_10000_CDR, -}; - -static const u32 amd_xgbe_phy_serdes_pq_skew[] = { - SPEED_1000_PQ, - SPEED_2500_PQ, - SPEED_10000_PQ, -}; - -static const u32 amd_xgbe_phy_serdes_tx_amp[] = { - SPEED_1000_TXAMP, - SPEED_2500_TXAMP, - SPEED_10000_TXAMP, -}; - -static const u32 amd_xgbe_phy_serdes_dfe_tap_cfg[] = { - SPEED_1000_DFE_TAP_CONFIG, - SPEED_2500_DFE_TAP_CONFIG, - SPEED_10000_DFE_TAP_CONFIG, -}; - -static const u32 amd_xgbe_phy_serdes_dfe_tap_ena[] = { - SPEED_1000_DFE_TAP_ENABLE, - SPEED_2500_DFE_TAP_ENABLE, - SPEED_10000_DFE_TAP_ENABLE, -}; - -enum amd_xgbe_phy_an { - AMD_XGBE_AN_READY = 0, - AMD_XGBE_AN_PAGE_RECEIVED, - AMD_XGBE_AN_INCOMPAT_LINK, - AMD_XGBE_AN_COMPLETE, - AMD_XGBE_AN_NO_LINK, - AMD_XGBE_AN_ERROR, -}; - -enum amd_xgbe_phy_rx { - AMD_XGBE_RX_BPA = 0, - AMD_XGBE_RX_XNP, - AMD_XGBE_RX_COMPLETE, - AMD_XGBE_RX_ERROR, -}; - -enum amd_xgbe_phy_mode { - AMD_XGBE_MODE_KR, - AMD_XGBE_MODE_KX, -}; - -enum amd_xgbe_phy_speedset { - AMD_XGBE_PHY_SPEEDSET_1000_10000 = 0, - AMD_XGBE_PHY_SPEEDSET_2500_10000, -}; - -struct amd_xgbe_phy_priv { - struct platform_device *pdev; - struct acpi_device *adev; - struct device *dev; - - struct phy_device *phydev; - - /* SerDes related mmio resources */ - struct resource *rxtx_res; - struct resource *sir0_res; - struct resource *sir1_res; - - /* SerDes related mmio registers */ - void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */ - void __iomem *sir0_regs; /* SerDes integration registers (1/2) */ - void __iomem *sir1_regs; /* SerDes integration registers (2/2) */ - - int an_irq; - char an_irq_name[IFNAMSIZ + 32]; - struct work_struct an_irq_work; - unsigned int an_irq_allocated; - - unsigned int speed_set; - - /* SerDes UEFI configurable settings. - * Switching between modes/speeds requires new values for some - * SerDes settings. The values can be supplied as device - * properties in array format. The first array entry is for - * 1GbE, second for 2.5GbE and third for 10GbE - */ - u32 serdes_blwc[XGBE_PHY_SPEEDS]; - u32 serdes_cdr_rate[XGBE_PHY_SPEEDS]; - u32 serdes_pq_skew[XGBE_PHY_SPEEDS]; - u32 serdes_tx_amp[XGBE_PHY_SPEEDS]; - u32 serdes_dfe_tap_cfg[XGBE_PHY_SPEEDS]; - u32 serdes_dfe_tap_ena[XGBE_PHY_SPEEDS]; - - /* Auto-negotiation state machine support */ - struct mutex an_mutex; - enum amd_xgbe_phy_an an_result; - enum amd_xgbe_phy_an an_state; - enum amd_xgbe_phy_rx kr_state; - enum amd_xgbe_phy_rx kx_state; - struct work_struct an_work; - struct workqueue_struct *an_workqueue; - unsigned int an_supported; - unsigned int parallel_detect; - unsigned int fec_ability; - unsigned long an_start; - - unsigned int lpm_ctrl; /* CTRL1 for resume */ -}; - -static int amd_xgbe_an_enable_kr_training(struct phy_device *phydev) -{ - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); - if (ret < 0) - return ret; - - ret |= XGBE_PHY_KR_TRAINING_ENABLE; - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); - - return 0; -} - -static int amd_xgbe_an_disable_kr_training(struct phy_device *phydev) -{ - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); - if (ret < 0) - return ret; - - ret &= ~XGBE_PHY_KR_TRAINING_ENABLE; - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); - - return 0; -} - -static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev) -{ - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret |= MDIO_CTRL1_LPOWER; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - usleep_range(75, 100); - - ret &= ~MDIO_CTRL1_LPOWER; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - return 0; -} - -static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - - /* Assert Rx and Tx ratechange */ - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 1); -} - -static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - unsigned int wait; - u16 status; - - /* Release Rx and Tx ratechange */ - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0); - - /* Wait for Rx and Tx ready */ - wait = XGBE_PHY_RATECHANGE_COUNT; - while (wait--) { - usleep_range(50, 75); - - status = XSIR0_IOREAD(priv, SIR0_STATUS); - if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) && - XSIR_GET_BITS(status, SIR0_STATUS, TX_READY)) - goto rx_reset; - } - - netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n", - status); - -rx_reset: - /* Perform Rx reset for the DFE changes */ - XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 0); - XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 1); -} - -static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* Enable KR training */ - ret = amd_xgbe_an_enable_kr_training(phydev); - if (ret < 0) - return ret; - - /* Set PCS to KR/10G speed */ - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); - if (ret < 0) - return ret; - - ret &= ~MDIO_PCS_CTRL2_TYPE; - ret |= MDIO_PCS_CTRL2_10GBR; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret &= ~MDIO_CTRL1_SPEEDSEL; - ret |= MDIO_CTRL1_SPEED10G; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - ret = amd_xgbe_phy_pcs_power_cycle(phydev); - if (ret < 0) - return ret; - - /* Set SerDes to 10G speed */ - amd_xgbe_phy_serdes_start_ratechange(phydev); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, - priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, - priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, - priv->serdes_blwc[XGBE_PHY_SPEED_10000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, - priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, - priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_10000]); - XRXTX_IOWRITE(priv, RXTX_REG22, - priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_10000]); - - amd_xgbe_phy_serdes_complete_ratechange(phydev); - - return 0; -} - -static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* Disable KR training */ - ret = amd_xgbe_an_disable_kr_training(phydev); - if (ret < 0) - return ret; - - /* Set PCS to KX/1G speed */ - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); - if (ret < 0) - return ret; - - ret &= ~MDIO_PCS_CTRL2_TYPE; - ret |= MDIO_PCS_CTRL2_10GBX; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret &= ~MDIO_CTRL1_SPEEDSEL; - ret |= MDIO_CTRL1_SPEED1G; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - ret = amd_xgbe_phy_pcs_power_cycle(phydev); - if (ret < 0) - return ret; - - /* Set SerDes to 2.5G speed */ - amd_xgbe_phy_serdes_start_ratechange(phydev); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, - priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, - priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, - priv->serdes_blwc[XGBE_PHY_SPEED_2500]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, - priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, - priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_2500]); - XRXTX_IOWRITE(priv, RXTX_REG22, - priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_2500]); - - amd_xgbe_phy_serdes_complete_ratechange(phydev); - - return 0; -} - -static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* Disable KR training */ - ret = amd_xgbe_an_disable_kr_training(phydev); - if (ret < 0) - return ret; - - /* Set PCS to KX/1G speed */ - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); - if (ret < 0) - return ret; - - ret &= ~MDIO_PCS_CTRL2_TYPE; - ret |= MDIO_PCS_CTRL2_10GBX; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret &= ~MDIO_CTRL1_SPEEDSEL; - ret |= MDIO_CTRL1_SPEED1G; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - ret = amd_xgbe_phy_pcs_power_cycle(phydev); - if (ret < 0) - return ret; - - /* Set SerDes to 1G speed */ - amd_xgbe_phy_serdes_start_ratechange(phydev); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL); - - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, - priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]); - XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, - priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, - priv->serdes_blwc[XGBE_PHY_SPEED_1000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, - priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]); - XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, - priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_1000]); - XRXTX_IOWRITE(priv, RXTX_REG22, - priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_1000]); - - amd_xgbe_phy_serdes_complete_ratechange(phydev); - - return 0; -} - -static int amd_xgbe_phy_cur_mode(struct phy_device *phydev, - enum amd_xgbe_phy_mode *mode) -{ - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); - if (ret < 0) - return ret; - - if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR) - *mode = AMD_XGBE_MODE_KR; - else - *mode = AMD_XGBE_MODE_KX; - - return 0; -} - -static bool amd_xgbe_phy_in_kr_mode(struct phy_device *phydev) -{ - enum amd_xgbe_phy_mode mode; - - if (amd_xgbe_phy_cur_mode(phydev, &mode)) - return false; - - return (mode == AMD_XGBE_MODE_KR); -} - -static int amd_xgbe_phy_switch_mode(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* If we are in KR switch to KX, and vice-versa */ - if (amd_xgbe_phy_in_kr_mode(phydev)) { - if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000) - ret = amd_xgbe_phy_gmii_mode(phydev); - else - ret = amd_xgbe_phy_gmii_2500_mode(phydev); - } else { - ret = amd_xgbe_phy_xgmii_mode(phydev); - } - - return ret; -} - -static int amd_xgbe_phy_set_mode(struct phy_device *phydev, - enum amd_xgbe_phy_mode mode) -{ - enum amd_xgbe_phy_mode cur_mode; - int ret; - - ret = amd_xgbe_phy_cur_mode(phydev, &cur_mode); - if (ret) - return ret; - - if (mode != cur_mode) - ret = amd_xgbe_phy_switch_mode(phydev); - - return ret; -} - -static bool amd_xgbe_phy_use_xgmii_mode(struct phy_device *phydev) -{ - if (phydev->autoneg == AUTONEG_ENABLE) { - if (phydev->advertising & ADVERTISED_10000baseKR_Full) - return true; - } else { - if (phydev->speed == SPEED_10000) - return true; - } - - return false; -} - -static bool amd_xgbe_phy_use_gmii_2500_mode(struct phy_device *phydev) -{ - if (phydev->autoneg == AUTONEG_ENABLE) { - if (phydev->advertising & ADVERTISED_2500baseX_Full) - return true; - } else { - if (phydev->speed == SPEED_2500) - return true; - } - - return false; -} - -static bool amd_xgbe_phy_use_gmii_mode(struct phy_device *phydev) -{ - if (phydev->autoneg == AUTONEG_ENABLE) { - if (phydev->advertising & ADVERTISED_1000baseKX_Full) - return true; - } else { - if (phydev->speed == SPEED_1000) - return true; - } - - return false; -} - -static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable, - bool restart) -{ - int ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret &= ~MDIO_AN_CTRL1_ENABLE; - - if (enable) - ret |= MDIO_AN_CTRL1_ENABLE; - - if (restart) - ret |= MDIO_AN_CTRL1_RESTART; - - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret); - - return 0; -} - -static int amd_xgbe_phy_restart_an(struct phy_device *phydev) -{ - return amd_xgbe_phy_set_an(phydev, true, true); -} - -static int amd_xgbe_phy_disable_an(struct phy_device *phydev) -{ - return amd_xgbe_phy_set_an(phydev, false, false); -} - -static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev, - enum amd_xgbe_phy_rx *state) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ad_reg, lp_reg, ret; - - *state = AMD_XGBE_RX_COMPLETE; - - /* If we're not in KR mode then we're done */ - if (!amd_xgbe_phy_in_kr_mode(phydev)) - return AMD_XGBE_AN_PAGE_RECEIVED; - - /* Enable/Disable FEC */ - ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); - if (ad_reg < 0) - return AMD_XGBE_AN_ERROR; - - lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 2); - if (lp_reg < 0) - return AMD_XGBE_AN_ERROR; - - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL); - if (ret < 0) - return AMD_XGBE_AN_ERROR; - - ret &= ~XGBE_PHY_FEC_MASK; - if ((ad_reg & 0xc000) && (lp_reg & 0xc000)) - ret |= priv->fec_ability; - - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL, ret); - - /* Start KR training */ - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); - if (ret < 0) - return AMD_XGBE_AN_ERROR; - - if (ret & XGBE_PHY_KR_TRAINING_ENABLE) { - XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1); - - ret |= XGBE_PHY_KR_TRAINING_START; - phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, - ret); - - XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0); - } - - return AMD_XGBE_AN_PAGE_RECEIVED; -} - -static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev, - enum amd_xgbe_phy_rx *state) -{ - u16 msg; - - *state = AMD_XGBE_RX_XNP; - - msg = XNP_MCF_NULL_MESSAGE; - msg |= XNP_MP_FORMATTED; - - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 2, 0); - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 1, 0); - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP, msg); - - return AMD_XGBE_AN_PAGE_RECEIVED; -} - -static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev, - enum amd_xgbe_phy_rx *state) -{ - unsigned int link_support; - int ret, ad_reg, lp_reg; - - /* Read Base Ability register 2 first */ - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); - if (ret < 0) - return AMD_XGBE_AN_ERROR; - - /* Check for a supported mode, otherwise restart in a different one */ - link_support = amd_xgbe_phy_in_kr_mode(phydev) ? 0x80 : 0x20; - if (!(ret & link_support)) - return AMD_XGBE_AN_INCOMPAT_LINK; - - /* Check Extended Next Page support */ - ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); - if (ad_reg < 0) - return AMD_XGBE_AN_ERROR; - - lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); - if (lp_reg < 0) - return AMD_XGBE_AN_ERROR; - - return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? - amd_xgbe_an_tx_xnp(phydev, state) : - amd_xgbe_an_tx_training(phydev, state); -} - -static enum amd_xgbe_phy_an amd_xgbe_an_rx_xnp(struct phy_device *phydev, - enum amd_xgbe_phy_rx *state) -{ - int ad_reg, lp_reg; - - /* Check Extended Next Page support */ - ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP); - if (ad_reg < 0) - return AMD_XGBE_AN_ERROR; - - lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPX); - if (lp_reg < 0) - return AMD_XGBE_AN_ERROR; - - return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? - amd_xgbe_an_tx_xnp(phydev, state) : - amd_xgbe_an_tx_training(phydev, state); -} - -static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - enum amd_xgbe_phy_rx *state; - unsigned long an_timeout; - int ret; - - if (!priv->an_start) { - priv->an_start = jiffies; - } else { - an_timeout = priv->an_start + - msecs_to_jiffies(XGBE_AN_MS_TIMEOUT); - if (time_after(jiffies, an_timeout)) { - /* Auto-negotiation timed out, reset state */ - priv->kr_state = AMD_XGBE_RX_BPA; - priv->kx_state = AMD_XGBE_RX_BPA; - - priv->an_start = jiffies; - } - } - - state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state - : &priv->kx_state; - - switch (*state) { - case AMD_XGBE_RX_BPA: - ret = amd_xgbe_an_rx_bpa(phydev, state); - break; - - case AMD_XGBE_RX_XNP: - ret = amd_xgbe_an_rx_xnp(phydev, state); - break; - - default: - ret = AMD_XGBE_AN_ERROR; - } - - return ret; -} - -static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* Be sure we aren't looping trying to negotiate */ - if (amd_xgbe_phy_in_kr_mode(phydev)) { - priv->kr_state = AMD_XGBE_RX_ERROR; - - if (!(phydev->advertising & SUPPORTED_1000baseKX_Full) && - !(phydev->advertising & SUPPORTED_2500baseX_Full)) - return AMD_XGBE_AN_NO_LINK; - - if (priv->kx_state != AMD_XGBE_RX_BPA) - return AMD_XGBE_AN_NO_LINK; - } else { - priv->kx_state = AMD_XGBE_RX_ERROR; - - if (!(phydev->advertising & SUPPORTED_10000baseKR_Full)) - return AMD_XGBE_AN_NO_LINK; - - if (priv->kr_state != AMD_XGBE_RX_BPA) - return AMD_XGBE_AN_NO_LINK; - } - - ret = amd_xgbe_phy_disable_an(phydev); - if (ret) - return AMD_XGBE_AN_ERROR; - - ret = amd_xgbe_phy_switch_mode(phydev); - if (ret) - return AMD_XGBE_AN_ERROR; - - ret = amd_xgbe_phy_restart_an(phydev); - if (ret) - return AMD_XGBE_AN_ERROR; - - return AMD_XGBE_AN_INCOMPAT_LINK; -} - -static irqreturn_t amd_xgbe_an_isr(int irq, void *data) -{ - struct amd_xgbe_phy_priv *priv = (struct amd_xgbe_phy_priv *)data; - - /* Interrupt reason must be read and cleared outside of IRQ context */ - disable_irq_nosync(priv->an_irq); - - queue_work(priv->an_workqueue, &priv->an_irq_work); - - return IRQ_HANDLED; -} - -static void amd_xgbe_an_irq_work(struct work_struct *work) -{ - struct amd_xgbe_phy_priv *priv = container_of(work, - struct amd_xgbe_phy_priv, - an_irq_work); - - /* Avoid a race between enabling the IRQ and exiting the work by - * waiting for the work to finish and then queueing it - */ - flush_work(&priv->an_work); - queue_work(priv->an_workqueue, &priv->an_work); -} - -static void amd_xgbe_an_state_machine(struct work_struct *work) -{ - struct amd_xgbe_phy_priv *priv = container_of(work, - struct amd_xgbe_phy_priv, - an_work); - struct phy_device *phydev = priv->phydev; - enum amd_xgbe_phy_an cur_state = priv->an_state; - int int_reg, int_mask; - - mutex_lock(&priv->an_mutex); - - /* Read the interrupt */ - int_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT); - if (!int_reg) - goto out; - -next_int: - if (int_reg < 0) { - priv->an_state = AMD_XGBE_AN_ERROR; - int_mask = XGBE_AN_INT_MASK; - } else if (int_reg & XGBE_AN_PG_RCV) { - priv->an_state = AMD_XGBE_AN_PAGE_RECEIVED; - int_mask = XGBE_AN_PG_RCV; - } else if (int_reg & XGBE_AN_INC_LINK) { - priv->an_state = AMD_XGBE_AN_INCOMPAT_LINK; - int_mask = XGBE_AN_INC_LINK; - } else if (int_reg & XGBE_AN_INT_CMPLT) { - priv->an_state = AMD_XGBE_AN_COMPLETE; - int_mask = XGBE_AN_INT_CMPLT; - } else { - priv->an_state = AMD_XGBE_AN_ERROR; - int_mask = 0; - } - - /* Clear the interrupt to be processed */ - int_reg &= ~int_mask; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, int_reg); - - priv->an_result = priv->an_state; - -again: - cur_state = priv->an_state; - - switch (priv->an_state) { - case AMD_XGBE_AN_READY: - priv->an_supported = 0; - break; - - case AMD_XGBE_AN_PAGE_RECEIVED: - priv->an_state = amd_xgbe_an_page_received(phydev); - priv->an_supported++; - break; - - case AMD_XGBE_AN_INCOMPAT_LINK: - priv->an_supported = 0; - priv->parallel_detect = 0; - priv->an_state = amd_xgbe_an_incompat_link(phydev); - break; - - case AMD_XGBE_AN_COMPLETE: - priv->parallel_detect = priv->an_supported ? 0 : 1; - netdev_dbg(phydev->attached_dev, "%s successful\n", - priv->an_supported ? "Auto negotiation" - : "Parallel detection"); - break; - - case AMD_XGBE_AN_NO_LINK: - break; - - default: - priv->an_state = AMD_XGBE_AN_ERROR; - } - - if (priv->an_state == AMD_XGBE_AN_NO_LINK) { - int_reg = 0; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); - } else if (priv->an_state == AMD_XGBE_AN_ERROR) { - netdev_err(phydev->attached_dev, - "error during auto-negotiation, state=%u\n", - cur_state); - - int_reg = 0; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); - } - - if (priv->an_state >= AMD_XGBE_AN_COMPLETE) { - priv->an_result = priv->an_state; - priv->an_state = AMD_XGBE_AN_READY; - priv->kr_state = AMD_XGBE_RX_BPA; - priv->kx_state = AMD_XGBE_RX_BPA; - priv->an_start = 0; - } - - if (cur_state != priv->an_state) - goto again; - - if (int_reg) - goto next_int; - -out: - enable_irq(priv->an_irq); - - mutex_unlock(&priv->an_mutex); -} - -static int amd_xgbe_an_init(struct phy_device *phydev) -{ - int ret; - - /* Set up Advertisement register 3 first */ - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); - if (ret < 0) - return ret; - - if (phydev->advertising & SUPPORTED_10000baseR_FEC) - ret |= 0xc000; - else - ret &= ~0xc000; - - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2, ret); - - /* Set up Advertisement register 2 next */ - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); - if (ret < 0) - return ret; - - if (phydev->advertising & SUPPORTED_10000baseKR_Full) - ret |= 0x80; - else - ret &= ~0x80; - - if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || - (phydev->advertising & SUPPORTED_2500baseX_Full)) - ret |= 0x20; - else - ret &= ~0x20; - - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1, ret); - - /* Set up Advertisement register 1 last */ - ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); - if (ret < 0) - return ret; - - if (phydev->advertising & SUPPORTED_Pause) - ret |= 0x400; - else - ret &= ~0x400; - - if (phydev->advertising & SUPPORTED_Asym_Pause) - ret |= 0x800; - else - ret &= ~0x800; - - /* We don't intend to perform XNP */ - ret &= ~XNP_NP_EXCHANGE; - - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ret); - - return 0; -} - -static int amd_xgbe_phy_soft_reset(struct phy_device *phydev) -{ - int count, ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - - ret |= MDIO_CTRL1_RESET; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - count = 50; - do { - msleep(20); - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - return ret; - } while ((ret & MDIO_CTRL1_RESET) && --count); - - if (ret & MDIO_CTRL1_RESET) - return -ETIMEDOUT; - - /* Disable auto-negotiation for now */ - ret = amd_xgbe_phy_disable_an(phydev); - if (ret < 0) - return ret; - - /* Clear auto-negotiation interrupts */ - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); - - return 0; -} - -static int amd_xgbe_phy_config_init(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - struct net_device *netdev = phydev->attached_dev; - int ret; - - if (!priv->an_irq_allocated) { - /* Allocate the auto-negotiation workqueue and interrupt */ - snprintf(priv->an_irq_name, sizeof(priv->an_irq_name) - 1, - "%s-pcs", netdev_name(netdev)); - - priv->an_workqueue = - create_singlethread_workqueue(priv->an_irq_name); - if (!priv->an_workqueue) { - netdev_err(netdev, "phy workqueue creation failed\n"); - return -ENOMEM; - } - - ret = devm_request_irq(priv->dev, priv->an_irq, - amd_xgbe_an_isr, 0, priv->an_irq_name, - priv); - if (ret) { - netdev_err(netdev, "phy irq request failed\n"); - destroy_workqueue(priv->an_workqueue); - return ret; - } - - priv->an_irq_allocated = 1; - } - - /* Set initial mode - call the mode setting routines - * directly to insure we are properly configured - */ - if (amd_xgbe_phy_use_xgmii_mode(phydev)) - ret = amd_xgbe_phy_xgmii_mode(phydev); - else if (amd_xgbe_phy_use_gmii_mode(phydev)) - ret = amd_xgbe_phy_gmii_mode(phydev); - else if (amd_xgbe_phy_use_gmii_2500_mode(phydev)) - ret = amd_xgbe_phy_gmii_2500_mode(phydev); - else - ret = -EINVAL; - if (ret < 0) - return ret; - - /* Set up advertisement registers based on current settings */ - ret = amd_xgbe_an_init(phydev); - if (ret) - return ret; - - /* Enable auto-negotiation interrupts */ - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INTMASK, 0x07); - - return 0; -} - -static int amd_xgbe_phy_setup_forced(struct phy_device *phydev) -{ - int ret; - - /* Disable auto-negotiation */ - ret = amd_xgbe_phy_disable_an(phydev); - if (ret < 0) - return ret; - - /* Validate/Set specified speed */ - switch (phydev->speed) { - case SPEED_10000: - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); - break; - - case SPEED_2500: - case SPEED_1000: - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); - break; - - default: - ret = -EINVAL; - } - - if (ret < 0) - return ret; - - /* Validate duplex mode */ - if (phydev->duplex != DUPLEX_FULL) - return -EINVAL; - - phydev->pause = 0; - phydev->asym_pause = 0; - - return 0; -} - -static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - u32 mmd_mask = phydev->c45_ids.devices_in_package; - int ret; - - if (phydev->autoneg != AUTONEG_ENABLE) - return amd_xgbe_phy_setup_forced(phydev); - - /* Make sure we have the AN MMD present */ - if (!(mmd_mask & MDIO_DEVS_AN)) - return -EINVAL; - - /* Disable auto-negotiation interrupt */ - disable_irq(priv->an_irq); - - /* Start auto-negotiation in a supported mode */ - if (phydev->advertising & SUPPORTED_10000baseKR_Full) - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); - else if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || - (phydev->advertising & SUPPORTED_2500baseX_Full)) - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); - else - ret = -EINVAL; - if (ret < 0) { - enable_irq(priv->an_irq); - return ret; - } - - /* Disable and stop any in progress auto-negotiation */ - ret = amd_xgbe_phy_disable_an(phydev); - if (ret < 0) - return ret; - - /* Clear any auto-negotitation interrupts */ - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); - - priv->an_result = AMD_XGBE_AN_READY; - priv->an_state = AMD_XGBE_AN_READY; - priv->kr_state = AMD_XGBE_RX_BPA; - priv->kx_state = AMD_XGBE_RX_BPA; - - /* Re-enable auto-negotiation interrupt */ - enable_irq(priv->an_irq); - - /* Set up advertisement registers based on current settings */ - ret = amd_xgbe_an_init(phydev); - if (ret) - return ret; - - /* Enable and start auto-negotiation */ - return amd_xgbe_phy_restart_an(phydev); -} - -static int amd_xgbe_phy_config_aneg(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - mutex_lock(&priv->an_mutex); - - ret = __amd_xgbe_phy_config_aneg(phydev); - - mutex_unlock(&priv->an_mutex); - - return ret; -} - -static int amd_xgbe_phy_aneg_done(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - - return (priv->an_result == AMD_XGBE_AN_COMPLETE); -} - -static int amd_xgbe_phy_update_link(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - /* If we're doing auto-negotiation don't report link down */ - if (priv->an_state != AMD_XGBE_AN_READY) { - phydev->link = 1; - return 0; - } - - /* Link status is latched low, so read once to clear - * and then read again to get current state - */ - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); - if (ret < 0) - return ret; - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); - if (ret < 0) - return ret; - - phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0; - - return 0; -} - -static int amd_xgbe_phy_read_status(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - u32 mmd_mask = phydev->c45_ids.devices_in_package; - int ret, ad_ret, lp_ret; - - ret = amd_xgbe_phy_update_link(phydev); - if (ret) - return ret; - - if ((phydev->autoneg == AUTONEG_ENABLE) && - !priv->parallel_detect) { - if (!(mmd_mask & MDIO_DEVS_AN)) - return -EINVAL; - - if (!amd_xgbe_phy_aneg_done(phydev)) - return 0; - - /* Compare Advertisement and Link Partner register 1 */ - ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); - if (ad_ret < 0) - return ad_ret; - lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); - if (lp_ret < 0) - return lp_ret; - - ad_ret &= lp_ret; - phydev->pause = (ad_ret & 0x400) ? 1 : 0; - phydev->asym_pause = (ad_ret & 0x800) ? 1 : 0; - - /* Compare Advertisement and Link Partner register 2 */ - ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, - MDIO_AN_ADVERTISE + 1); - if (ad_ret < 0) - return ad_ret; - lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); - if (lp_ret < 0) - return lp_ret; - - ad_ret &= lp_ret; - if (ad_ret & 0x80) { - phydev->speed = SPEED_10000; - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); - if (ret) - return ret; - } else { - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - phydev->speed = SPEED_1000; - break; - - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - phydev->speed = SPEED_2500; - break; - } - - ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); - if (ret) - return ret; - } - - phydev->duplex = DUPLEX_FULL; - } else { - if (amd_xgbe_phy_in_kr_mode(phydev)) { - phydev->speed = SPEED_10000; - } else { - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - phydev->speed = SPEED_1000; - break; - - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - phydev->speed = SPEED_2500; - break; - } - } - phydev->duplex = DUPLEX_FULL; - phydev->pause = 0; - phydev->asym_pause = 0; - } - - return 0; -} - -static int amd_xgbe_phy_suspend(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - int ret; - - mutex_lock(&phydev->lock); - - ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); - if (ret < 0) - goto unlock; - - priv->lpm_ctrl = ret; - - ret |= MDIO_CTRL1_LPOWER; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); - - ret = 0; - -unlock: - mutex_unlock(&phydev->lock); - - return ret; -} - -static int amd_xgbe_phy_resume(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - - mutex_lock(&phydev->lock); - - priv->lpm_ctrl &= ~MDIO_CTRL1_LPOWER; - phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, priv->lpm_ctrl); - - mutex_unlock(&phydev->lock); - - return 0; -} - -static unsigned int amd_xgbe_phy_resource_count(struct platform_device *pdev, - unsigned int type) -{ - unsigned int count; - int i; - - for (i = 0, count = 0; i < pdev->num_resources; i++) { - struct resource *r = &pdev->resource[i]; - - if (type == resource_type(r)) - count++; - } - - return count; -} - -static int amd_xgbe_phy_probe(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv; - struct platform_device *phy_pdev; - struct device *dev, *phy_dev; - unsigned int phy_resnum, phy_irqnum; - int ret; - - if (!phydev->bus || !phydev->bus->parent) - return -EINVAL; - - dev = phydev->bus->parent; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->pdev = to_platform_device(dev); - priv->adev = ACPI_COMPANION(dev); - priv->dev = dev; - priv->phydev = phydev; - mutex_init(&priv->an_mutex); - INIT_WORK(&priv->an_irq_work, amd_xgbe_an_irq_work); - INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine); - - if (!priv->adev || acpi_disabled) { - struct device_node *bus_node; - struct device_node *phy_node; - - bus_node = priv->dev->of_node; - phy_node = of_parse_phandle(bus_node, "phy-handle", 0); - if (!phy_node) { - dev_err(dev, "unable to parse phy-handle\n"); - ret = -EINVAL; - goto err_priv; - } - - phy_pdev = of_find_device_by_node(phy_node); - of_node_put(phy_node); - - if (!phy_pdev) { - dev_err(dev, "unable to obtain phy device\n"); - ret = -EINVAL; - goto err_priv; - } - - phy_resnum = 0; - phy_irqnum = 0; - } else { - /* In ACPI, the XGBE and PHY resources are the grouped - * together with the PHY resources at the end - */ - phy_pdev = priv->pdev; - phy_resnum = amd_xgbe_phy_resource_count(phy_pdev, - IORESOURCE_MEM) - 3; - phy_irqnum = amd_xgbe_phy_resource_count(phy_pdev, - IORESOURCE_IRQ) - 1; - } - phy_dev = &phy_pdev->dev; - - /* Get the device mmio areas */ - priv->rxtx_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, - phy_resnum++); - priv->rxtx_regs = devm_ioremap_resource(dev, priv->rxtx_res); - if (IS_ERR(priv->rxtx_regs)) { - dev_err(dev, "rxtx ioremap failed\n"); - ret = PTR_ERR(priv->rxtx_regs); - goto err_put; - } - - priv->sir0_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, - phy_resnum++); - priv->sir0_regs = devm_ioremap_resource(dev, priv->sir0_res); - if (IS_ERR(priv->sir0_regs)) { - dev_err(dev, "sir0 ioremap failed\n"); - ret = PTR_ERR(priv->sir0_regs); - goto err_rxtx; - } - - priv->sir1_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, - phy_resnum++); - priv->sir1_regs = devm_ioremap_resource(dev, priv->sir1_res); - if (IS_ERR(priv->sir1_regs)) { - dev_err(dev, "sir1 ioremap failed\n"); - ret = PTR_ERR(priv->sir1_regs); - goto err_sir0; - } - - /* Get the auto-negotiation interrupt */ - ret = platform_get_irq(phy_pdev, phy_irqnum); - if (ret < 0) { - dev_err(dev, "platform_get_irq failed\n"); - goto err_sir1; - } - priv->an_irq = ret; - - /* Get the device speed set property */ - ret = device_property_read_u32(phy_dev, XGBE_PHY_SPEEDSET_PROPERTY, - &priv->speed_set); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_SPEEDSET_PROPERTY); - goto err_sir1; - } - - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - break; - default: - dev_err(dev, "invalid %s property\n", - XGBE_PHY_SPEEDSET_PROPERTY); - ret = -EINVAL; - goto err_sir1; - } - - if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_BLWC_PROPERTY, - priv->serdes_blwc, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_BLWC_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc, - sizeof(priv->serdes_blwc)); - } - - if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_CDR_RATE_PROPERTY, - priv->serdes_cdr_rate, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_CDR_RATE_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate, - sizeof(priv->serdes_cdr_rate)); - } - - if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_PQ_SKEW_PROPERTY, - priv->serdes_pq_skew, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_PQ_SKEW_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew, - sizeof(priv->serdes_pq_skew)); - } - - if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_TX_AMP_PROPERTY, - priv->serdes_tx_amp, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_TX_AMP_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp, - sizeof(priv->serdes_tx_amp)); - } - - if (device_property_present(phy_dev, XGBE_PHY_DFE_CFG_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_DFE_CFG_PROPERTY, - priv->serdes_dfe_tap_cfg, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_DFE_CFG_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_dfe_tap_cfg, - amd_xgbe_phy_serdes_dfe_tap_cfg, - sizeof(priv->serdes_dfe_tap_cfg)); - } - - if (device_property_present(phy_dev, XGBE_PHY_DFE_ENA_PROPERTY)) { - ret = device_property_read_u32_array(phy_dev, - XGBE_PHY_DFE_ENA_PROPERTY, - priv->serdes_dfe_tap_ena, - XGBE_PHY_SPEEDS); - if (ret) { - dev_err(dev, "invalid %s property\n", - XGBE_PHY_DFE_ENA_PROPERTY); - goto err_sir1; - } - } else { - memcpy(priv->serdes_dfe_tap_ena, - amd_xgbe_phy_serdes_dfe_tap_ena, - sizeof(priv->serdes_dfe_tap_ena)); - } - - /* Initialize supported features */ - phydev->supported = SUPPORTED_Autoneg; - phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; - phydev->supported |= SUPPORTED_Backplane; - phydev->supported |= SUPPORTED_10000baseKR_Full; - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - phydev->supported |= SUPPORTED_1000baseKX_Full; - break; - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - phydev->supported |= SUPPORTED_2500baseX_Full; - break; - } - - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); - if (ret < 0) - return ret; - priv->fec_ability = ret & XGBE_PHY_FEC_MASK; - if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) - phydev->supported |= SUPPORTED_10000baseR_FEC; - - phydev->advertising = phydev->supported; - - phydev->priv = priv; - - if (!priv->adev || acpi_disabled) - platform_device_put(phy_pdev); - - return 0; - -err_sir1: - devm_iounmap(dev, priv->sir1_regs); - devm_release_mem_region(dev, priv->sir1_res->start, - resource_size(priv->sir1_res)); - -err_sir0: - devm_iounmap(dev, priv->sir0_regs); - devm_release_mem_region(dev, priv->sir0_res->start, - resource_size(priv->sir0_res)); - -err_rxtx: - devm_iounmap(dev, priv->rxtx_regs); - devm_release_mem_region(dev, priv->rxtx_res->start, - resource_size(priv->rxtx_res)); - -err_put: - if (!priv->adev || acpi_disabled) - platform_device_put(phy_pdev); - -err_priv: - devm_kfree(dev, priv); - - return ret; -} - -static void amd_xgbe_phy_remove(struct phy_device *phydev) -{ - struct amd_xgbe_phy_priv *priv = phydev->priv; - struct device *dev = priv->dev; - - if (priv->an_irq_allocated) { - devm_free_irq(dev, priv->an_irq, priv); - - flush_workqueue(priv->an_workqueue); - destroy_workqueue(priv->an_workqueue); - } - - /* Release resources */ - devm_iounmap(dev, priv->sir1_regs); - devm_release_mem_region(dev, priv->sir1_res->start, - resource_size(priv->sir1_res)); - - devm_iounmap(dev, priv->sir0_regs); - devm_release_mem_region(dev, priv->sir0_res->start, - resource_size(priv->sir0_res)); - - devm_iounmap(dev, priv->rxtx_regs); - devm_release_mem_region(dev, priv->rxtx_res->start, - resource_size(priv->rxtx_res)); - - devm_kfree(dev, priv); -} - -static int amd_xgbe_match_phy_device(struct phy_device *phydev) -{ - return phydev->c45_ids.device_ids[MDIO_MMD_PCS] == XGBE_PHY_ID; -} - -static struct phy_driver amd_xgbe_phy_driver[] = { - { - .phy_id = XGBE_PHY_ID, - .phy_id_mask = XGBE_PHY_MASK, - .name = "AMD XGBE PHY", - .features = 0, - .flags = PHY_IS_INTERNAL, - .probe = amd_xgbe_phy_probe, - .remove = amd_xgbe_phy_remove, - .soft_reset = amd_xgbe_phy_soft_reset, - .config_init = amd_xgbe_phy_config_init, - .suspend = amd_xgbe_phy_suspend, - .resume = amd_xgbe_phy_resume, - .config_aneg = amd_xgbe_phy_config_aneg, - .aneg_done = amd_xgbe_phy_aneg_done, - .read_status = amd_xgbe_phy_read_status, - .match_phy_device = amd_xgbe_match_phy_device, - .driver = { - .owner = THIS_MODULE, - }, - }, -}; - -module_phy_driver(amd_xgbe_phy_driver); - -static struct mdio_device_id __maybe_unused amd_xgbe_phy_ids[] = { - { XGBE_PHY_ID, XGBE_PHY_MASK }, - { } -}; -MODULE_DEVICE_TABLE(mdio, amd_xgbe_phy_ids); diff --git a/kernel/drivers/net/phy/aquantia.c b/kernel/drivers/net/phy/aquantia.c new file mode 100644 index 000000000..f1936b7a7 --- /dev/null +++ b/kernel/drivers/net/phy/aquantia.c @@ -0,0 +1,188 @@ +/* + * Driver for Aquantia PHY + * + * Author: Shaohui Xie + * + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PHY_ID_AQ1202 0x03a1b445 +#define PHY_ID_AQ2104 0x03a1b460 +#define PHY_ID_AQR105 0x03a1b4a2 +#define PHY_ID_AQR405 0x03a1b4b0 + +#define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \ + SUPPORTED_1000baseT_Full | \ + SUPPORTED_100baseT_Full | \ + PHY_DEFAULT_FEATURES) + +static int aquantia_config_aneg(struct phy_device *phydev) +{ + phydev->supported = PHY_AQUANTIA_FEATURES; + phydev->advertising = phydev->supported; + + return 0; +} + +static int aquantia_aneg_done(struct phy_device *phydev) +{ + int reg; + + reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + return (reg < 0) ? reg : (reg & BMSR_ANEGCOMPLETE); +} + +static int aquantia_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 1); + if (err < 0) + return err; + + err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 1); + if (err < 0) + return err; + + err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0x1001); + } else { + err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 0); + if (err < 0) + return err; + + err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 0); + if (err < 0) + return err; + + err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0); + } + + return err; +} + +static int aquantia_ack_interrupt(struct phy_device *phydev) +{ + int reg; + + reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xcc01); + return (reg < 0) ? reg : 0; +} + +static int aquantia_read_status(struct phy_device *phydev) +{ + int reg; + + reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (reg & MDIO_STAT1_LSTATUS) + phydev->link = 1; + else + phydev->link = 0; + + reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); + mdelay(10); + reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); + + switch (reg) { + case 0x9: + phydev->speed = SPEED_2500; + break; + case 0x5: + phydev->speed = SPEED_1000; + break; + case 0x3: + phydev->speed = SPEED_100; + break; + case 0x7: + default: + phydev->speed = SPEED_10000; + break; + } + phydev->duplex = DUPLEX_FULL; + + return 0; +} + +static struct phy_driver aquantia_driver[] = { +{ + .phy_id = PHY_ID_AQ1202, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQ1202", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, + .driver = { .owner = THIS_MODULE,}, +}, +{ + .phy_id = PHY_ID_AQ2104, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQ2104", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, + .driver = { .owner = THIS_MODULE,}, +}, +{ + .phy_id = PHY_ID_AQR105, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQR105", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, + .driver = { .owner = THIS_MODULE,}, +}, +{ + .phy_id = PHY_ID_AQR405, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQR405", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, + .driver = { .owner = THIS_MODULE,}, +}, +}; + +module_phy_driver(aquantia_driver); + +static struct mdio_device_id __maybe_unused aquantia_tbl[] = { + { PHY_ID_AQ1202, 0xfffffff0 }, + { PHY_ID_AQ2104, 0xfffffff0 }, + { PHY_ID_AQR105, 0xfffffff0 }, + { PHY_ID_AQR405, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, aquantia_tbl); + +MODULE_DESCRIPTION("Aquantia PHY driver"); +MODULE_AUTHOR("Shaohui Xie "); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/net/phy/at803x.c b/kernel/drivers/net/phy/at803x.c index fabf11d32..2d020a3ec 100644 --- a/kernel/drivers/net/phy/at803x.c +++ b/kernel/drivers/net/phy/at803x.c @@ -308,6 +308,8 @@ static struct phy_driver at803x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = at803x_ack_interrupt, + .config_intr = at803x_config_intr, .driver = { .owner = THIS_MODULE, }, @@ -327,6 +329,8 @@ static struct phy_driver at803x_driver[] = { .flags = PHY_HAS_INTERRUPT, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, + .ack_interrupt = at803x_ack_interrupt, + .config_intr = at803x_config_intr, .driver = { .owner = THIS_MODULE, }, diff --git a/kernel/drivers/net/phy/bcm-cygnus.c b/kernel/drivers/net/phy/bcm-cygnus.c new file mode 100644 index 000000000..49bbc6826 --- /dev/null +++ b/kernel/drivers/net/phy/bcm-cygnus.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Broadcom Cygnus SoC internal transceivers support. */ +#include "bcm-phy-lib.h" +#include +#include +#include +#include + +/* Broadcom Cygnus Phy specific registers */ +#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */ + +static int bcm_cygnus_afe_config(struct phy_device *phydev) +{ + int rc; + + /* ensure smdspclk is enabled */ + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30); + if (rc < 0) + return rc; + + /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */ + rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8); + if (rc < 0) + return rc; + + /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803); + if (rc < 0) + return rc; + + /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740); + if (rc < 0) + return rc; + + /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400); + if (rc < 0) + return rc; + + /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */ + rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004); + if (rc < 0) + return rc; + + /* Adjust bias current trim to overcome digital offSet */ + rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02); + if (rc < 0) + return rc; + + /* make rcal=100, since rdb default is 000 */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10); + if (rc < 0) + return rc; + + /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10); + if (rc < 0) + return rc; + + /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00); + + return 0; +} + +static int bcm_cygnus_config_init(struct phy_device *phydev) +{ + int reg, rc; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + /* Mask interrupts globally. */ + reg |= MII_BCM54XX_ECR_IM; + rc = phy_write(phydev, MII_BCM54XX_ECR, reg); + if (rc) + return rc; + + /* Unmask events of interest */ + reg = ~(MII_BCM54XX_INT_DUPLEX | + MII_BCM54XX_INT_SPEED | + MII_BCM54XX_INT_LINK); + rc = phy_write(phydev, MII_BCM54XX_IMR, reg); + if (rc) + return rc; + + /* Apply AFE settings for the PHY */ + rc = bcm_cygnus_afe_config(phydev); + if (rc) + return rc; + + /* Advertise EEE */ + rc = bcm_phy_enable_eee(phydev); + if (rc) + return rc; + + /* Enable APD */ + return bcm_phy_enable_apd(phydev, false); +} + +static int bcm_cygnus_resume(struct phy_device *phydev) +{ + int rc; + + genphy_resume(phydev); + + /* Re-initialize the PHY to apply AFE work-arounds and + * configurations when coming out of suspend. + */ + rc = bcm_cygnus_config_init(phydev); + if (rc) + return rc; + + /* restart auto negotiation with the new settings */ + return genphy_config_aneg(phydev); +} + +static struct phy_driver bcm_cygnus_phy_driver[] = { +{ + .phy_id = PHY_ID_BCM_CYGNUS, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom Cygnus PHY", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .config_init = bcm_cygnus_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, + .suspend = genphy_suspend, + .resume = bcm_cygnus_resume, +} }; + +static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = { + { PHY_ID_BCM_CYGNUS, 0xfffffff0, }, + { } +}; +MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl); + +module_phy_driver(bcm_cygnus_phy_driver); + +MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom Corporation"); diff --git a/kernel/drivers/net/phy/bcm-phy-lib.c b/kernel/drivers/net/phy/bcm-phy-lib.c new file mode 100644 index 000000000..ddb377e53 --- /dev/null +++ b/kernel/drivers/net/phy/bcm-phy-lib.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "bcm-phy-lib.h" +#include +#include +#include +#include +#include + +#define MII_BCM_CHANNEL_WIDTH 0x2000 +#define BCM_CL45VEN_EEE_ADV 0x3c + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +{ + int rc; + + rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (rc < 0) + return rc; + + return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_exp); + +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +{ + int val; + + val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (val < 0) + return val; + + val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + + /* Restore default value. It's O.K. if this write fails. */ + phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); + + return val; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_exp); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 val) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_write_exp(phydev, tmp, val); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_write_misc); + +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_read_exp(phydev, tmp); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_misc); + +int bcm_phy_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* Clear pending interrupts. */ + reg = phy_read(phydev, MII_BCM54XX_ISR); + if (reg < 0) + return reg; + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_ack_intr); + +int bcm_phy_config_intr(struct phy_device *phydev) +{ + int reg; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~MII_BCM54XX_ECR_IM; + else + reg |= MII_BCM54XX_ECR_IM; + + return phy_write(phydev, MII_BCM54XX_ECR, reg); +} +EXPORT_SYMBOL_GPL(bcm_phy_config_intr); + +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow) +{ + phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); + return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); +} +EXPORT_SYMBOL_GPL(bcm_phy_read_shadow); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val) +{ + return phy_write(phydev, MII_BCM54XX_SHD, + MII_BCM54XX_SHD_WRITE | + MII_BCM54XX_SHD_VAL(shadow) | + MII_BCM54XX_SHD_DATA(val)); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_shadow); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down) +{ + int val; + + if (dll_pwr_down) { + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); + if (val < 0) + return val; + + val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); + } + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); + if (val < 0) + return val; + + /* Clear APD bits */ + val &= BCM_APD_CLR_MASK; + + if (phydev->autoneg == AUTONEG_ENABLE) + val |= BCM54XX_SHD_APD_EN; + else + val |= BCM_NO_ANEG_APD_EN; + + /* Enable energy detect single link pulse for easy wakeup */ + val |= BCM_APD_SINGLELP_EN; + + /* Enable Auto Power-Down (APD) for the PHY */ + return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); + +int bcm_phy_enable_eee(struct phy_device *phydev) +{ + int val; + + /* Enable EEE at PHY level */ + val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; + + phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr, (u32)val); + + /* Advertise EEE */ + val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); + + phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr, (u32)val); + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_eee); + +MODULE_DESCRIPTION("Broadcom PHY Library"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom Corporation"); diff --git a/kernel/drivers/net/phy/bcm-phy-lib.h b/kernel/drivers/net/phy/bcm-phy-lib.h new file mode 100644 index 000000000..b2091c88b --- /dev/null +++ b/kernel/drivers/net/phy/bcm-phy-lib.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_BCM_PHY_LIB_H +#define _LINUX_BCM_PHY_LIB_H + +#include + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 value); +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val); +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow); + +int bcm_phy_ack_intr(struct phy_device *phydev); +int bcm_phy_config_intr(struct phy_device *phydev); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down); + +int bcm_phy_enable_eee(struct phy_device *phydev); +#endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/kernel/drivers/net/phy/bcm63xx.c b/kernel/drivers/net/phy/bcm63xx.c index 830ec31f9..86b28052b 100644 --- a/kernel/drivers/net/phy/bcm63xx.c +++ b/kernel/drivers/net/phy/bcm63xx.c @@ -6,6 +6,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include #include @@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BCM63XX_IR, reg); } -static int bcm63xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm63xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM63XX_IR_GMASK; - else - reg |= MII_BCM63XX_IR_GMASK; - - err = phy_write(phydev, MII_BCM63XX_IR, reg); - return err; -} - static struct phy_driver bcm63xx_driver[] = { { .phy_id = 0x00406000, @@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { /* same phy as above, with just a different OUI */ @@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, } }; diff --git a/kernel/drivers/net/phy/bcm7xxx.c b/kernel/drivers/net/phy/bcm7xxx.c index b5dc59de0..03d4809a9 100644 --- a/kernel/drivers/net/phy/bcm7xxx.c +++ b/kernel/drivers/net/phy/bcm7xxx.c @@ -12,12 +12,12 @@ #include #include #include +#include "bcm-phy-lib.h" #include #include #include /* Broadcom BCM7xxx internal PHY registers */ -#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 /* 40nm only register definitions */ #define MII_BCM7XXX_100TX_AUX_CTL 0x10 @@ -25,7 +25,6 @@ #define MII_BCM7XXX_100TX_DISC 0x14 #define MII_BCM7XXX_AUX_MODE 0x1d #define MII_BCM7XX_64CLK_MDIO BIT(12) -#define MII_BCM7XXX_CORE_BASE1E 0x1e #define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_SHD_MODE_2 BIT(2) @@ -46,39 +45,13 @@ #define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3) #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) -#define CORE_EXPB0 0xb0 - -static void phy_write_exp(struct phy_device *phydev, - u16 reg, u16 value) -{ - phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg); - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - -static void phy_write_misc(struct phy_device *phydev, - u16 reg, u16 chl, u16 value) -{ - int tmp; - - phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); - - tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); - tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; - phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); - - tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg; - phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp); - - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - static void r_rc_cal_reset(struct phy_device *phydev) { /* Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0010); + bcm_phy_write_exp(phydev, 0x00b0, 0x0010); /* Disable Reset R_AL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0000); + bcm_phy_write_exp(phydev, 0x00b0, 0x0000); } static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) @@ -86,38 +59,38 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) /* Increase VCO range to prevent unlocking problem of PLL at low * temp */ - phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); /* Change Ki to 011 */ - phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); /* Disable loading of TVCO buffer to bandgap, set bandgap trim * to 111 */ - phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); /* Adjust bias current trim by -3 */ - phy_write_misc(phydev, DSP_TAP10, 0x690b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b); /* Switch to CORE_BASE1E */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd); r_rc_cal_reset(phydev); /* write AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); /* write AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); /* write AFE_RX_LP_COUNTER */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); /* write AFE_HPF_TRIM_OTHERS */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); /* write AFTE_TX_CONFIG */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); return 0; } @@ -125,36 +98,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); /* AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */ - phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); - /* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061); + /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */ - phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); + bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -165,21 +138,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + + /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -187,53 +163,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) return 0; } -static int bcm7xxx_apd_enable(struct phy_device *phydev) -{ - int val; - - /* Enable powering down of the DLL during auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); - if (val < 0) - return val; - - val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); - - /* Enable auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); - if (val < 0) - return val; - - val |= BCM54XX_SHD_APD_EN; - return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); -} - -static int bcm7xxx_eee_enable(struct phy_device *phydev) -{ - int val; - - val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr); - if (val < 0) - return val; - - /* Enable general EEE feature at the PHY level */ - val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; - - phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr, val); - - /* Advertise supported modes */ - val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); - - val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); - phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr, val); - - return 0; -} - static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); @@ -243,6 +172,13 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", dev_name(&phydev->dev), phydev->drv->name, rev, patch); + /* Dummy read to a register to workaround an issue upon reset where the + * internal inverter may not allow the first MDIO transaction to pass + * the MDIO management controller and make us return 0xffff for such + * reads. + */ + phy_read(phydev, MII_BMSR); + switch (rev) { case 0xb0: ret = bcm7xxx_28nm_b0_afe_config_init(phydev); @@ -263,11 +199,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) if (ret) return ret; - ret = bcm7xxx_eee_enable(phydev); + ret = bcm_phy_enable_eee(phydev); if (ret) return ret; - return bcm7xxx_apd_enable(phydev); + return bcm_phy_enable_apd(phydev, true); } static int bcm7xxx_28nm_resume(struct phy_device *phydev) diff --git a/kernel/drivers/net/phy/broadcom.c b/kernel/drivers/net/phy/broadcom.c index 9c71295f2..3ce5d9514 100644 --- a/kernel/drivers/net/phy/broadcom.c +++ b/kernel/drivers/net/phy/broadcom.c @@ -14,6 +14,7 @@ * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include #include #include @@ -29,39 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); -/* Indirect register access functions for the Expansion Registers */ -static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum) -{ - int val; - - val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (val < 0) - return val; - - val = phy_read(phydev, MII_BCM54XX_EXP_DATA); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return val; -} - -static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val) -{ - int ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (ret < 0) - return ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return ret; -} - static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) { return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); @@ -72,28 +40,28 @@ static int bcm50610_a0_workaround(struct phy_device *phydev) { int err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0, MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN | MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3, - MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3, + MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, MII_BCM54XX_EXP_EXP75_VDACCTRL); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96, MII_BCM54XX_EXP_EXP96_MYST); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97, MII_BCM54XX_EXP_EXP97_MYST); return err; @@ -114,7 +82,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) { /* Clear bit 9 to fix a phy interop issue. */ - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, MII_BCM54XX_EXP_EXP08_RJCT_2MHZ); if (err < 0) goto error; @@ -129,12 +97,12 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) { int val; - val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75); + val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75); if (val < 0) goto error; val |= MII_BCM54XX_EXP_EXP75_CM_OSC; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val); } error: @@ -159,7 +127,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) return; - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); if (val < 0) return; @@ -190,9 +158,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val |= BCM54XX_SHD_SCR3_TRDDAPD; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); if (val < 0) return; @@ -204,7 +172,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val &= ~BCM54XX_SHD_APD_EN; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); } static int bcm54xx_config_init(struct phy_device *phydev) @@ -232,7 +200,7 @@ static int bcm54xx_config_init(struct phy_device *phydev) if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) && (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0); if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) || (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) || @@ -254,8 +222,8 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Enable secondary SerDes and its use as an LED source */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD); - bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD); + bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD, reg | BCM5482_SHD_SSD_LEDM | BCM5482_SHD_SSD_EN); @@ -264,10 +232,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Enable SGMII slave mode and auto-detection */ reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, err | + err = bcm_phy_write_exp(phydev, reg, err | BCM5482_SSD_SGMII_SLAVE_EN | BCM5482_SSD_SGMII_SLAVE_AD); if (err < 0) @@ -277,10 +245,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Disable secondary SerDes powerdown */ reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, + err = bcm_phy_write_exp(phydev, reg, err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); if (err < 0) return err; @@ -288,15 +256,15 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Select 1000BASE-X register set (primary SerDes) */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE); - bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE); + bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE, reg | BCM5482_SHD_MODE_1000BX); /* * LED1=ACTIVITYLED, LED3=LINKSPD[2] * (Use LED1 as secondary SerDes ACTIVITY LED) */ - bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1, + bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2)); @@ -334,35 +302,6 @@ static int bcm5482_read_status(struct phy_device *phydev) return err; } -static int bcm54xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM54XX_ISR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm54xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM54XX_ECR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM54XX_ECR_IM; - else - reg |= MII_BCM54XX_ECR_IM; - - err = phy_write(phydev, MII_BCM54XX_ECR, reg); - return err; -} - static int bcm5481_config_aneg(struct phy_device *phydev) { int ret; @@ -519,8 +458,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5421, @@ -532,8 +471,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5461, @@ -545,8 +484,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM54616S, @@ -558,8 +497,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5464, @@ -571,8 +510,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5481, @@ -584,8 +523,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5482, @@ -597,8 +536,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, .read_status = bcm5482_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610, @@ -610,8 +549,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610M, @@ -623,8 +562,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM57780, @@ -636,8 +575,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCMAC131, @@ -675,7 +614,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM5461, 0xfffffff0 }, { PHY_ID_BCM54616S, 0xfffffff0 }, { PHY_ID_BCM5464, 0xfffffff0 }, - { PHY_ID_BCM5482, 0xfffffff0 }, + { PHY_ID_BCM5481, 0xfffffff0 }, { PHY_ID_BCM5482, 0xfffffff0 }, { PHY_ID_BCM50610, 0xfffffff0 }, { PHY_ID_BCM50610M, 0xfffffff0 }, diff --git a/kernel/drivers/net/phy/davicom.c b/kernel/drivers/net/phy/davicom.c index 0d16c7d9e..2a328703b 100644 --- a/kernel/drivers/net/phy/davicom.c +++ b/kernel/drivers/net/phy/davicom.c @@ -157,6 +157,18 @@ static struct phy_driver dm91xx_driver[] = { .ack_interrupt = dm9161_ack_interrupt, .config_intr = dm9161_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = 0x0181b8b0, + .name = "Davicom DM9161B/C", + .phy_id_mask = 0x0ffffff0, + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = dm9161_config_init, + .config_aneg = dm9161_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = dm9161_ack_interrupt, + .config_intr = dm9161_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x0181b8a0, .name = "Davicom DM9161A", @@ -186,6 +198,7 @@ module_phy_driver(dm91xx_driver); static struct mdio_device_id __maybe_unused davicom_tbl[] = { { 0x0181b880, 0x0ffffff0 }, + { 0x0181b8b0, 0x0ffffff0 }, { 0x0181b8a0, 0x0ffffff0 }, { 0x00181b80, 0x0ffffff0 }, { } diff --git a/kernel/drivers/net/phy/dp83640.c b/kernel/drivers/net/phy/dp83640.c index 00cb41e71..e6cefd0e3 100644 --- a/kernel/drivers/net/phy/dp83640.c +++ b/kernel/drivers/net/phy/dp83640.c @@ -20,6 +20,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -36,8 +37,6 @@ #define DP83640_PHY_ID 0x20005ce1 #define PAGESEL 0x13 -#define LAYER4 0x02 -#define LAYER2 0x01 #define MAX_RXTS 64 #define N_EXT_TS 6 #define N_PER_OUT 7 @@ -68,6 +67,8 @@ /* phyter seems to miss the mark by 16 ns */ #define ADJTIME_FIX 16 +#define SKB_TIMESTAMP_TIMEOUT 2 /* jiffies */ + #if defined(__BIG_ENDIAN) #define ENDIAN_FLAG 0 #elif defined(__LITTLE_ENDIAN) @@ -110,7 +111,7 @@ struct dp83640_private { struct list_head list; struct dp83640_clock *clock; struct phy_device *phydev; - struct work_struct ts_work; + struct delayed_work ts_work; int hwts_tx_en; int hwts_rx_en; int layer; @@ -284,7 +285,7 @@ static void phy2rxts(struct phy_rxts *p, struct rxts *rxts) rxts->seqid = p->seqid; rxts->msgtype = (p->msgtype >> 12) & 0xf; rxts->hash = p->msgtype & 0x0fff; - rxts->tmo = jiffies + 2; + rxts->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT; } static u64 phy2txts(struct phy_txts *p) @@ -787,9 +788,12 @@ static int decode_evnt(struct dp83640_private *dp83640, return parsed; } +#define DP83640_PACKET_HASH_OFFSET 20 +#define DP83640_PACKET_HASH_LEN 10 + static int match(struct sk_buff *skb, unsigned int type, struct rxts *rxts) { - u16 *seqid; + u16 *seqid, hash; unsigned int offset = 0; u8 *msgtype, *data = skb_mac_header(skb); @@ -819,11 +823,19 @@ static int match(struct sk_buff *skb, unsigned int type, struct rxts *rxts) msgtype = data + offset + OFF_PTP_CONTROL; else msgtype = data + offset; + if (rxts->msgtype != (*msgtype & 0xf)) + return 0; seqid = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); + if (rxts->seqid != ntohs(*seqid)) + return 0; - return rxts->msgtype == (*msgtype & 0xf) && - rxts->seqid == ntohs(*seqid); + hash = ether_crc(DP83640_PACKET_HASH_LEN, + data + offset + DP83640_PACKET_HASH_OFFSET) >> 20; + if (rxts->hash != hash) + return 0; + + return 1; } static void decode_rxts(struct dp83640_private *dp83640, @@ -833,6 +845,11 @@ static void decode_rxts(struct dp83640_private *dp83640, struct skb_shared_hwtstamps *shhwtstamps = NULL; struct sk_buff *skb; unsigned long flags; + u8 overflow; + + overflow = (phy_rxts->ns_hi >> 14) & 0x3; + if (overflow) + pr_debug("rx timestamp queue overflow, count %d\n", overflow); spin_lock_irqsave(&dp83640->rx_lock, flags); @@ -875,6 +892,7 @@ static void decode_txts(struct dp83640_private *dp83640, struct skb_shared_hwtstamps shhwtstamps; struct sk_buff *skb; u64 ns; + u8 overflow; /* We must already have the skb that triggered this. */ @@ -884,6 +902,17 @@ static void decode_txts(struct dp83640_private *dp83640, pr_debug("have timestamp but tx_queue empty\n"); return; } + + overflow = (phy_txts->ns_hi >> 14) & 0x3; + if (overflow) { + pr_debug("tx timestamp queue overflow, count %d\n", overflow); + while (skb) { + skb_complete_tx_timestamp(skb, NULL); + skb = skb_dequeue(&dp83640->tx_queue); + } + return; + } + ns = phy2txts(phy_txts); memset(&shhwtstamps, 0, sizeof(shhwtstamps)); shhwtstamps.hwtstamp = ns_to_ktime(ns); @@ -1103,7 +1132,7 @@ static int dp83640_probe(struct phy_device *phydev) goto no_memory; dp83640->phydev = phydev; - INIT_WORK(&dp83640->ts_work, rx_timestamp_work); + INIT_DELAYED_WORK(&dp83640->ts_work, rx_timestamp_work); INIT_LIST_HEAD(&dp83640->rxts); INIT_LIST_HEAD(&dp83640->rxpool); @@ -1150,7 +1179,7 @@ static void dp83640_remove(struct phy_device *phydev) return; enable_status_frames(phydev, false); - cancel_work_sync(&dp83640->ts_work); + cancel_delayed_work_sync(&dp83640->ts_work); skb_queue_purge(&dp83640->rx_queue); skb_queue_purge(&dp83640->tx_queue); @@ -1282,29 +1311,29 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: dp83640->hwts_rx_en = 1; - dp83640->layer = LAYER4; - dp83640->version = 1; + dp83640->layer = PTP_CLASS_L4; + dp83640->version = PTP_CLASS_V1; break; case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: dp83640->hwts_rx_en = 1; - dp83640->layer = LAYER4; - dp83640->version = 2; + dp83640->layer = PTP_CLASS_L4; + dp83640->version = PTP_CLASS_V2; break; case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: dp83640->hwts_rx_en = 1; - dp83640->layer = LAYER2; - dp83640->version = 2; + dp83640->layer = PTP_CLASS_L2; + dp83640->version = PTP_CLASS_V2; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: dp83640->hwts_rx_en = 1; - dp83640->layer = LAYER4|LAYER2; - dp83640->version = 2; + dp83640->layer = PTP_CLASS_L4 | PTP_CLASS_L2; + dp83640->version = PTP_CLASS_V2; break; default: return -ERANGE; @@ -1313,11 +1342,11 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) txcfg0 = (dp83640->version & TX_PTP_VER_MASK) << TX_PTP_VER_SHIFT; rxcfg0 = (dp83640->version & TX_PTP_VER_MASK) << TX_PTP_VER_SHIFT; - if (dp83640->layer & LAYER2) { + if (dp83640->layer & PTP_CLASS_L2) { txcfg0 |= TX_L2_EN; rxcfg0 |= RX_L2_EN; } - if (dp83640->layer & LAYER4) { + if (dp83640->layer & PTP_CLASS_L4) { txcfg0 |= TX_IPV6_EN | TX_IPV4_EN; rxcfg0 |= RX_IPV6_EN | RX_IPV4_EN; } @@ -1344,7 +1373,7 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) static void rx_timestamp_work(struct work_struct *work) { struct dp83640_private *dp83640 = - container_of(work, struct dp83640_private, ts_work); + container_of(work, struct dp83640_private, ts_work.work); struct sk_buff *skb; /* Deliver expired packets. */ @@ -1361,7 +1390,7 @@ static void rx_timestamp_work(struct work_struct *work) } if (!skb_queue_empty(&dp83640->rx_queue)) - schedule_work(&dp83640->ts_work); + schedule_delayed_work(&dp83640->ts_work, SKB_TIMESTAMP_TIMEOUT); } static bool dp83640_rxtstamp(struct phy_device *phydev, @@ -1383,7 +1412,11 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (!dp83640->hwts_rx_en) return false; + if ((type & dp83640->version) == 0 || (type & dp83640->layer) == 0) + return false; + spin_lock_irqsave(&dp83640->rx_lock, flags); + prune_rx_ts(dp83640); list_for_each_safe(this, next, &dp83640->rxts) { rxts = list_entry(this, struct rxts, list); if (match(skb, type, rxts)) { @@ -1400,9 +1433,11 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (!shhwtstamps) { skb_info->ptp_type = type; - skb_info->tmo = jiffies + 2; + skb_info->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT; skb_queue_tail(&dp83640->rx_queue, skb); - schedule_work(&dp83640->ts_work); + schedule_delayed_work(&dp83640->ts_work, SKB_TIMESTAMP_TIMEOUT); + } else { + netif_rx_ni(skb); } return true; @@ -1449,17 +1484,9 @@ static int dp83640_ts_info(struct phy_device *dev, struct ethtool_ts_info *info) info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ); + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); return 0; } diff --git a/kernel/drivers/net/phy/dp83848.c b/kernel/drivers/net/phy/dp83848.c new file mode 100644 index 000000000..5ce9bef54 --- /dev/null +++ b/kernel/drivers/net/phy/dp83848.c @@ -0,0 +1,99 @@ +/* + * Driver for the Texas Instruments DP83848 PHY + * + * Copyright (C) 2015 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +#define DP83848_PHY_ID 0x20005c90 + +/* Registers */ +#define DP83848_MICR 0x11 +#define DP83848_MISR 0x12 + +/* MICR Register Fields */ +#define DP83848_MICR_INT_OE BIT(0) /* Interrupt Output Enable */ +#define DP83848_MICR_INTEN BIT(1) /* Interrupt Enable */ + +/* MISR Register Fields */ +#define DP83848_MISR_RHF_INT_EN BIT(0) /* Receive Error Counter */ +#define DP83848_MISR_FHF_INT_EN BIT(1) /* False Carrier Counter */ +#define DP83848_MISR_ANC_INT_EN BIT(2) /* Auto-negotiation complete */ +#define DP83848_MISR_DUP_INT_EN BIT(3) /* Duplex Status */ +#define DP83848_MISR_SPD_INT_EN BIT(4) /* Speed status */ +#define DP83848_MISR_LINK_INT_EN BIT(5) /* Link status */ +#define DP83848_MISR_ED_INT_EN BIT(6) /* Energy detect */ +#define DP83848_MISR_LQM_INT_EN BIT(7) /* Link Quality Monitor */ + +static int dp83848_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, DP83848_MISR); + + return err < 0 ? err : 0; +} + +static int dp83848_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = phy_write(phydev, DP83848_MICR, + DP83848_MICR_INT_OE | + DP83848_MICR_INTEN); + if (err < 0) + return err; + + return phy_write(phydev, DP83848_MISR, + DP83848_MISR_ANC_INT_EN | + DP83848_MISR_DUP_INT_EN | + DP83848_MISR_SPD_INT_EN | + DP83848_MISR_LINK_INT_EN); + } + + return phy_write(phydev, DP83848_MICR, 0x0); +} + +static struct mdio_device_id __maybe_unused dp83848_tbl[] = { + { DP83848_PHY_ID, 0xfffffff0 }, + { } +}; +MODULE_DEVICE_TABLE(mdio, dp83848_tbl); + +static struct phy_driver dp83848_driver[] = { + { + .phy_id = DP83848_PHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "TI DP83848", + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + + .soft_reset = genphy_soft_reset, + .config_init = genphy_config_init, + .suspend = genphy_suspend, + .resume = genphy_resume, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + + /* IRQ related */ + .ack_interrupt = dp83848_ack_interrupt, + .config_intr = dp83848_config_intr, + + .driver = { .owner = THIS_MODULE, }, + }, +}; +module_phy_driver(dp83848_driver); + +MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver"); +MODULE_AUTHOR("Andrew F. Davis +#include +#include +#include +#include +#include + +#include + +#define DP83867_PHY_ID 0x2000a231 +#define DP83867_DEVADDR 0x1f + +#define MII_DP83867_PHYCTRL 0x10 +#define MII_DP83867_MICR 0x12 +#define MII_DP83867_ISR 0x13 +#define DP83867_CTRL 0x1f + +/* Extended Registers */ +#define DP83867_RGMIICTL 0x0032 +#define DP83867_RGMIIDCTL 0x0086 + +#define DP83867_SW_RESET BIT(15) +#define DP83867_SW_RESTART BIT(14) + +/* MICR Interrupt bits */ +#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15) +#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14) +#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13) +#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12) +#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11) +#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10) +#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8) +#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4) +#define MII_DP83867_MICR_WOL_INT_EN BIT(3) +#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2) +#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1) +#define MII_DP83867_MICR_JABBER_INT_EN BIT(0) + +/* RGMIICTL bits */ +#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1) +#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0) + +/* PHY CTRL bits */ +#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 + +/* RGMIIDCTL bits */ +#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 + +struct dp83867_private { + int rx_id_delay; + int tx_id_delay; + int fifo_depth; +}; + +static int dp83867_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, MII_DP83867_ISR); + + if (err < 0) + return err; + + return 0; +} + +static int dp83867_config_intr(struct phy_device *phydev) +{ + int micr_status; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + micr_status = phy_read(phydev, MII_DP83867_MICR); + if (micr_status < 0) + return micr_status; + + micr_status |= + (MII_DP83867_MICR_AN_ERR_INT_EN | + MII_DP83867_MICR_SPEED_CHNG_INT_EN | + MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN | + MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN); + + return phy_write(phydev, MII_DP83867_MICR, micr_status); + } + + micr_status = 0x0; + return phy_write(phydev, MII_DP83867_MICR, micr_status); +} + +#ifdef CONFIG_OF_MDIO +static int dp83867_of_init(struct phy_device *phydev) +{ + struct dp83867_private *dp83867 = phydev->priv; + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + int ret; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (!phydev->dev.of_node) + return -ENODEV; + + ret = of_property_read_u32(of_node, "ti,rx-internal-delay", + &dp83867->rx_id_delay); + if (ret) + return ret; + + ret = of_property_read_u32(of_node, "ti,tx-internal-delay", + &dp83867->tx_id_delay); + if (ret) + return ret; + + return of_property_read_u32(of_node, "ti,fifo-depth", + &dp83867->fifo_depth); +} +#else +static int dp83867_of_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + +static int dp83867_config_init(struct phy_device *phydev) +{ + struct dp83867_private *dp83867; + int ret; + u16 val, delay; + + if (!phydev->priv) { + dp83867 = devm_kzalloc(&phydev->dev, sizeof(*dp83867), + GFP_KERNEL); + if (!dp83867) + return -ENOMEM; + + phydev->priv = dp83867; + ret = dp83867_of_init(phydev); + if (ret) + return ret; + } else { + dp83867 = (struct dp83867_private *)phydev->priv; + } + + if (phy_interface_is_rgmii(phydev)) { + ret = phy_write(phydev, MII_DP83867_PHYCTRL, + (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); + if (ret) + return ret; + } + + if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) && + (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) { + val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL, + DP83867_DEVADDR, phydev->addr); + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN); + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + val |= DP83867_RGMII_TX_CLK_DELAY_EN; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + val |= DP83867_RGMII_RX_CLK_DELAY_EN; + + phy_write_mmd_indirect(phydev, DP83867_RGMIICTL, + DP83867_DEVADDR, phydev->addr, val); + + delay = (dp83867->rx_id_delay | + (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT)); + + phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL, + DP83867_DEVADDR, phydev->addr, delay); + } + + return 0; +} + +static int dp83867_phy_reset(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET); + if (err < 0) + return err; + + return dp83867_config_init(phydev); +} + +static struct phy_driver dp83867_driver[] = { + { + .phy_id = DP83867_PHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "TI DP83867", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + + .config_init = dp83867_config_init, + .soft_reset = dp83867_phy_reset, + + /* IRQ related */ + .ack_interrupt = dp83867_ack_interrupt, + .config_intr = dp83867_config_intr, + + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + + .driver = {.owner = THIS_MODULE,} + }, +}; +module_phy_driver(dp83867_driver); + +static struct mdio_device_id __maybe_unused dp83867_tbl[] = { + { DP83867_PHY_ID, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, dp83867_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver"); +MODULE_AUTHOR("Dan Murphy #include #include +#include #define MII_REGS_NUM 29 @@ -38,6 +39,7 @@ struct fixed_phy { struct fixed_phy_status status; int (*link_update)(struct net_device *, struct fixed_phy_status *); struct list_head node; + int link_gpio; }; static struct platform_device *pdev; @@ -52,61 +54,87 @@ static int fixed_phy_update_regs(struct fixed_phy *fp) u16 lpagb = 0; u16 lpa = 0; - if (!fp->status.link) - goto done; - bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; + if (gpio_is_valid(fp->link_gpio)) + fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio); if (fp->status.duplex) { - bmcr |= BMCR_FULLDPLX; - switch (fp->status.speed) { case 1000: bmsr |= BMSR_ESTATEN; - bmcr |= BMCR_SPEED1000; - lpagb |= LPA_1000FULL; break; case 100: bmsr |= BMSR_100FULL; - bmcr |= BMCR_SPEED100; - lpa |= LPA_100FULL; break; case 10: bmsr |= BMSR_10FULL; - lpa |= LPA_10FULL; break; default: - pr_warn("fixed phy: unknown speed\n"); - return -EINVAL; + break; } } else { switch (fp->status.speed) { case 1000: bmsr |= BMSR_ESTATEN; - bmcr |= BMCR_SPEED1000; - lpagb |= LPA_1000HALF; break; case 100: bmsr |= BMSR_100HALF; - bmcr |= BMCR_SPEED100; - lpa |= LPA_100HALF; break; case 10: bmsr |= BMSR_10HALF; - lpa |= LPA_10HALF; break; default: - pr_warn("fixed phy: unknown speed\n"); - return -EINVAL; + break; } } - if (fp->status.pause) - lpa |= LPA_PAUSE_CAP; + if (fp->status.link) { + bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; + + if (fp->status.duplex) { + bmcr |= BMCR_FULLDPLX; + + switch (fp->status.speed) { + case 1000: + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000FULL; + break; + case 100: + bmcr |= BMCR_SPEED100; + lpa |= LPA_100FULL; + break; + case 10: + lpa |= LPA_10FULL; + break; + default: + pr_warn("fixed phy: unknown speed\n"); + return -EINVAL; + } + } else { + switch (fp->status.speed) { + case 1000: + bmcr |= BMCR_SPEED1000; + lpagb |= LPA_1000HALF; + break; + case 100: + bmcr |= BMCR_SPEED100; + lpa |= LPA_100HALF; + break; + case 10: + lpa |= LPA_10HALF; + break; + default: + pr_warn("fixed phy: unknown speed\n"); + return -EINVAL; + } + } - if (fp->status.asym_pause) - lpa |= LPA_PAUSE_ASYM; + if (fp->status.pause) + lpa |= LPA_PAUSE_CAP; + + if (fp->status.asym_pause) + lpa |= LPA_PAUSE_ASYM; + } -done: fp->regs[MII_PHYSID1] = 0; fp->regs[MII_PHYSID2] = 0; @@ -192,7 +220,7 @@ int fixed_phy_update_state(struct phy_device *phydev, struct fixed_mdio_bus *fmb = &platform_fmb; struct fixed_phy *fp; - if (!phydev || !phydev->bus) + if (!phydev || phydev->bus != fmb->mii_bus) return -EINVAL; list_for_each_entry(fp, &fmb->phys, node) { @@ -215,7 +243,8 @@ int fixed_phy_update_state(struct phy_device *phydev, EXPORT_SYMBOL(fixed_phy_update_state); int fixed_phy_add(unsigned int irq, int phy_addr, - struct fixed_phy_status *status) + struct fixed_phy_status *status, + int link_gpio) { int ret; struct fixed_mdio_bus *fmb = &platform_fmb; @@ -231,15 +260,26 @@ int fixed_phy_add(unsigned int irq, int phy_addr, fp->addr = phy_addr; fp->status = *status; + fp->link_gpio = link_gpio; + + if (gpio_is_valid(fp->link_gpio)) { + ret = gpio_request_one(fp->link_gpio, GPIOF_DIR_IN, + "fixed-link-gpio-link"); + if (ret) + goto err_regs; + } ret = fixed_phy_update_regs(fp); if (ret) - goto err_regs; + goto err_gpio; list_add_tail(&fp->node, &fmb->phys); return 0; +err_gpio: + if (gpio_is_valid(fp->link_gpio)) + gpio_free(fp->link_gpio); err_regs: kfree(fp); return ret; @@ -254,6 +294,8 @@ void fixed_phy_del(int phy_addr) list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { if (fp->addr == phy_addr) { list_del(&fp->node); + if (gpio_is_valid(fp->link_gpio)) + gpio_free(fp->link_gpio); kfree(fp); return; } @@ -266,6 +308,7 @@ static DEFINE_SPINLOCK(phy_fixed_addr_lock); struct phy_device *fixed_phy_register(unsigned int irq, struct fixed_phy_status *status, + int link_gpio, struct device_node *np) { struct fixed_mdio_bus *fmb = &platform_fmb; @@ -282,7 +325,7 @@ struct phy_device *fixed_phy_register(unsigned int irq, phy_addr = phy_fixed_addr++; spin_unlock(&phy_fixed_addr_lock); - ret = fixed_phy_add(PHY_POLL, phy_addr, status); + ret = fixed_phy_add(irq, phy_addr, status, link_gpio); if (ret < 0) return ERR_PTR(ret); @@ -292,8 +335,30 @@ struct phy_device *fixed_phy_register(unsigned int irq, return ERR_PTR(-EINVAL); } + /* propagate the fixed link values to struct phy_device */ + phy->link = status->link; + if (status->link) { + phy->speed = status->speed; + phy->duplex = status->duplex; + phy->pause = status->pause; + phy->asym_pause = status->asym_pause; + } + of_node_get(np); phy->dev.of_node = np; + phy->is_pseudo_fixed_link = true; + + switch (status->speed) { + case SPEED_1000: + phy->supported = PHY_1000BT_FEATURES; + break; + case SPEED_100: + phy->supported = PHY_100BT_FEATURES; + break; + case SPEED_10: + default: + phy->supported = PHY_10BT_FEATURES; + } ret = phy_device_register(phy); if (ret) { diff --git a/kernel/drivers/net/phy/icplus.c b/kernel/drivers/net/phy/icplus.c index 8644f039d..0dbc445a5 100644 --- a/kernel/drivers/net/phy/icplus.c +++ b/kernel/drivers/net/phy/icplus.c @@ -139,10 +139,7 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + if (phy_interface_is_rgmii(phydev)) { c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); if (c < 0) diff --git a/kernel/drivers/net/phy/marvell.c b/kernel/drivers/net/phy/marvell.c index 1b1698f98..0240552b5 100644 --- a/kernel/drivers/net/phy/marvell.c +++ b/kernel/drivers/net/phy/marvell.c @@ -48,8 +48,11 @@ #define MII_M1011_IMASK_CLEAR 0x0000 #define MII_M1011_PHY_SCR 0x10 +#define MII_M1011_PHY_SCR_MDI 0x0000 +#define MII_M1011_PHY_SCR_MDI_X 0x0020 #define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060 +#define MII_M1145_PHY_EXT_ADDR_PAGE 0x16 #define MII_M1145_PHY_EXT_SR 0x1b #define MII_M1145_PHY_EXT_CR 0x14 #define MII_M1145_RGMII_RX_DELAY 0x0080 @@ -159,6 +162,43 @@ static int marvell_config_intr(struct phy_device *phydev) return err; } +static int marvell_set_polarity(struct phy_device *phydev, int polarity) +{ + int reg; + int err; + int val; + + /* get the current settings */ + reg = phy_read(phydev, MII_M1011_PHY_SCR); + if (reg < 0) + return reg; + + val = reg; + val &= ~MII_M1011_PHY_SCR_AUTO_CROSS; + switch (polarity) { + case ETH_TP_MDI: + val |= MII_M1011_PHY_SCR_MDI; + break; + case ETH_TP_MDI_X: + val |= MII_M1011_PHY_SCR_MDI_X; + break; + case ETH_TP_MDI_AUTO: + case ETH_TP_MDI_INVALID: + default: + val |= MII_M1011_PHY_SCR_AUTO_CROSS; + break; + } + + if (val != reg) { + /* Set the new polarity value in the register */ + err = phy_write(phydev, MII_M1011_PHY_SCR, val); + if (err) + return err; + } + + return 0; +} + static int marvell_config_aneg(struct phy_device *phydev) { int err; @@ -191,8 +231,7 @@ static int marvell_config_aneg(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_M1011_PHY_SCR, - MII_M1011_PHY_SCR_AUTO_CROSS); + err = marvell_set_polarity(phydev, phydev->mdix); if (err < 0) return err; @@ -317,10 +356,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + if (phy_interface_is_rgmii(phydev)) { mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) & MII_88E1121_PHY_MSCR_DELAY_MASK; @@ -469,10 +505,7 @@ static int m88e1111_config_init(struct phy_device *phydev) int err; int temp; - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + if (phy_interface_is_rgmii(phydev)) { temp = phy_read(phydev, MII_M1111_PHY_EXT_CR); if (temp < 0) @@ -520,6 +553,16 @@ static int m88e1111_config_init(struct phy_device *phydev) err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); if (err < 0) return err; + + /* make sure copper is selected */ + err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, + err & (~0xff)); + if (err < 0) + return err; } if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { @@ -742,6 +785,7 @@ static int marvell_read_status(struct phy_device *phydev) int adv; int err; int lpa; + int lpagb; int status = 0; /* Update the link, but return if there @@ -759,10 +803,17 @@ static int marvell_read_status(struct phy_device *phydev) if (lpa < 0) return lpa; + lpagb = phy_read(phydev, MII_STAT1000); + if (lpagb < 0) + return lpagb; + adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; + phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) | + mii_lpa_to_ethtool_lpa_t(lpa); + lpa &= adv; if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) @@ -810,6 +861,7 @@ static int marvell_read_status(struct phy_device *phydev) phydev->speed = SPEED_10; phydev->pause = phydev->asym_pause = 0; + phydev->lp_advertising = 0; } return 0; @@ -1101,6 +1153,21 @@ static struct phy_driver marvell_drivers[] = { .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = MARVELL_PHY_ID_88E1540, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1540", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &m88e1510_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, + .driver = { .owner = THIS_MODULE }, + }, { .phy_id = MARVELL_PHY_ID_88E3016, .phy_id_mask = MARVELL_PHY_ID_MASK, @@ -1134,6 +1201,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK }, { } }; diff --git a/kernel/drivers/net/phy/mdio-bcm-iproc.c b/kernel/drivers/net/phy/mdio-bcm-iproc.c new file mode 100644 index 000000000..c0b4e6526 --- /dev/null +++ b/kernel/drivers/net/phy/mdio-bcm-iproc.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IPROC_GPHY_MDCDIV 0x1a + +#define MII_CTRL_OFFSET 0x000 + +#define MII_CTRL_DIV_SHIFT 0 +#define MII_CTRL_PRE_SHIFT 7 +#define MII_CTRL_BUSY_SHIFT 8 + +#define MII_DATA_OFFSET 0x004 +#define MII_DATA_MASK 0xffff +#define MII_DATA_TA_SHIFT 16 +#define MII_DATA_TA_VAL 2 +#define MII_DATA_RA_SHIFT 18 +#define MII_DATA_PA_SHIFT 23 +#define MII_DATA_OP_SHIFT 28 +#define MII_DATA_OP_WRITE 1 +#define MII_DATA_OP_READ 2 +#define MII_DATA_SB_SHIFT 30 + +struct iproc_mdio_priv { + struct mii_bus *mii_bus; + void __iomem *base; +}; + +static inline int iproc_mdio_wait_for_idle(void __iomem *base) +{ + u32 val; + unsigned int timeout = 1000; /* loop for 1s */ + + do { + val = readl(base + MII_CTRL_OFFSET); + if ((val & BIT(MII_CTRL_BUSY_SHIFT)) == 0) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + return -ETIMEDOUT; +} + +static inline void iproc_mdio_config_clk(void __iomem *base) +{ + u32 val; + + val = (IPROC_GPHY_MDCDIV << MII_CTRL_DIV_SHIFT) | + BIT(MII_CTRL_PRE_SHIFT); + writel(val, base + MII_CTRL_OFFSET); +} + +static int iproc_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct iproc_mdio_priv *priv = bus->priv; + u32 cmd; + int rc; + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + iproc_mdio_config_clk(priv->base); + + /* Prepare the read operation */ + cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) | + (reg << MII_DATA_RA_SHIFT) | + (phy_id << MII_DATA_PA_SHIFT) | + BIT(MII_DATA_SB_SHIFT) | + (MII_DATA_OP_READ << MII_DATA_OP_SHIFT); + + writel(cmd, priv->base + MII_DATA_OFFSET); + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + cmd = readl(priv->base + MII_DATA_OFFSET) & MII_DATA_MASK; + + return cmd; +} + +static int iproc_mdio_write(struct mii_bus *bus, int phy_id, + int reg, u16 val) +{ + struct iproc_mdio_priv *priv = bus->priv; + u32 cmd; + int rc; + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + iproc_mdio_config_clk(priv->base); + + /* Prepare the write operation */ + cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) | + (reg << MII_DATA_RA_SHIFT) | + (phy_id << MII_DATA_PA_SHIFT) | + BIT(MII_DATA_SB_SHIFT) | + (MII_DATA_OP_WRITE << MII_DATA_OP_SHIFT) | + ((u32)(val) & MII_DATA_MASK); + + writel(cmd, priv->base + MII_DATA_OFFSET); + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + return 0; +} + +static int iproc_mdio_probe(struct platform_device *pdev) +{ + struct iproc_mdio_priv *priv; + struct mii_bus *bus; + struct resource *res; + int rc; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) { + dev_err(&pdev->dev, "failed to ioremap register\n"); + return PTR_ERR(priv->base); + } + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + dev_err(&pdev->dev, "MDIO bus alloc failed\n"); + return -ENOMEM; + } + + bus = priv->mii_bus; + bus->priv = priv; + bus->name = "iProc MDIO bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); + bus->parent = &pdev->dev; + bus->read = iproc_mdio_read; + bus->write = iproc_mdio_write; + + rc = of_mdiobus_register(bus, pdev->dev.of_node); + if (rc) { + dev_err(&pdev->dev, "MDIO bus registration failed\n"); + goto err_iproc_mdio; + } + + platform_set_drvdata(pdev, priv); + + dev_info(&pdev->dev, "Broadcom iProc MDIO bus at 0x%p\n", priv->base); + + return 0; + +err_iproc_mdio: + mdiobus_free(bus); + return rc; +} + +static int iproc_mdio_remove(struct platform_device *pdev) +{ + struct iproc_mdio_priv *priv = platform_get_drvdata(pdev); + + mdiobus_unregister(priv->mii_bus); + mdiobus_free(priv->mii_bus); + + return 0; +} + +static const struct of_device_id iproc_mdio_of_match[] = { + { .compatible = "brcm,iproc-mdio", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, iproc_mdio_of_match); + +static struct platform_driver iproc_mdio_driver = { + .driver = { + .name = "iproc-mdio", + .of_match_table = iproc_mdio_of_match, + }, + .probe = iproc_mdio_probe, + .remove = iproc_mdio_remove, +}; + +module_platform_driver(iproc_mdio_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Broadcom iProc MDIO bus controller"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:iproc-mdio"); diff --git a/kernel/drivers/net/phy/mdio-bcm-unimac.c b/kernel/drivers/net/phy/mdio-bcm-unimac.c index 414fdf1f3..4bde5e728 100644 --- a/kernel/drivers/net/phy/mdio-bcm-unimac.c +++ b/kernel/drivers/net/phy/mdio-bcm-unimac.c @@ -81,7 +81,13 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) return -ETIMEDOUT; cmd = __raw_readl(priv->base + MDIO_CMD); - if (cmd & MDIO_READ_FAIL) + + /* Some broken devices are known not to release the line during + * turn-around, e.g: Broadcom BCM53125 external switches, so check for + * that condition here and ignore the MDIO controller read failure + * indication. + */ + if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL)) return -EIO; return cmd & 0xffff; @@ -114,6 +120,48 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id, return 0; } +/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with + * their internal MDIO management controller making them fail to successfully + * be read from or written to for the first transaction. We insert a dummy + * BMSR read here to make sure that phy_get_device() and get_phy_id() can + * correctly read the PHY MII_PHYSID1/2 registers and successfully register a + * PHY device for this peripheral. + * + * Once the PHY driver is registered, we can workaround subsequent reads from + * there (e.g: during system-wide power management). + * + * bus->reset is invoked before mdiobus_scan during mdiobus_register and is + * therefore the right location to stick that workaround. Since we do not want + * to read from non-existing PHYs, we either use bus->phy_mask or do a manual + * Device Tree scan to limit the search area. + */ +static int unimac_mdio_reset(struct mii_bus *bus) +{ + struct device_node *np = bus->dev.of_node; + struct device_node *child; + u32 read_mask = 0; + int addr; + + if (!np) { + read_mask = ~bus->phy_mask; + } else { + for_each_available_child_of_node(np, child) { + addr = of_mdio_parse_addr(&bus->dev, child); + if (addr < 0) + continue; + + read_mask |= 1 << addr; + } + } + + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + if (read_mask & 1 << addr) + mdiobus_read(bus, addr, MII_BMSR); + } + + return 0; +} + static int unimac_mdio_probe(struct platform_device *pdev) { struct unimac_mdio_priv *priv; @@ -149,6 +197,7 @@ static int unimac_mdio_probe(struct platform_device *pdev) bus->parent = &pdev->dev; bus->read = unimac_mdio_read; bus->write = unimac_mdio_write; + bus->reset = unimac_mdio_reset; snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); @@ -195,6 +244,7 @@ static const struct of_device_id unimac_mdio_ids[] = { { .compatible = "brcm,unimac-mdio", }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, unimac_mdio_ids); static struct platform_driver unimac_mdio_driver = { .driver = { diff --git a/kernel/drivers/net/phy/mdio-bitbang.c b/kernel/drivers/net/phy/mdio-bitbang.c index daec9b05d..61a543c78 100644 --- a/kernel/drivers/net/phy/mdio-bitbang.c +++ b/kernel/drivers/net/phy/mdio-bitbang.c @@ -165,8 +165,11 @@ static int mdiobb_read(struct mii_bus *bus, int phy, int reg) ctrl->ops->set_mdio_dir(ctrl, 0); - /* check the turnaround bit: the PHY should be driving it to zero */ - if (mdiobb_get_bit(ctrl) != 0) { + /* check the turnaround bit: the PHY should be driving it to zero, if this + * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that + */ + if (mdiobb_get_bit(ctrl) != 0 && + !(bus->phy_ignore_ta_mask & (1 << phy))) { /* PHY didn't drive TA low -- flush any bits it * may be trying to send. */ diff --git a/kernel/drivers/net/phy/mdio-gpio.c b/kernel/drivers/net/phy/mdio-gpio.c index 53d18150f..95f51d726 100644 --- a/kernel/drivers/net/phy/mdio-gpio.c +++ b/kernel/drivers/net/phy/mdio-gpio.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include @@ -158,6 +158,7 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, new_bus->name = "GPIO Bitbanged MDIO", new_bus->phy_mask = pdata->phy_mask; + new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask; new_bus->irq = pdata->irqs; new_bus->parent = dev; @@ -260,6 +261,7 @@ static const struct of_device_id mdio_gpio_of_match[] = { { .compatible = "virtual,mdio-gpio", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, mdio_gpio_of_match); static struct platform_driver mdio_gpio_driver = { .probe = mdio_gpio_probe, diff --git a/kernel/drivers/net/phy/mdio-mux-gpio.c b/kernel/drivers/net/phy/mdio-mux-gpio.c index 66edd99bc..7ddb1ab70 100644 --- a/kernel/drivers/net/phy/mdio-mux-gpio.c +++ b/kernel/drivers/net/phy/mdio-mux-gpio.c @@ -35,7 +35,8 @@ static int mdio_mux_gpio_switch_fn(int current_child, int desired_child, for (n = 0; n < s->gpios->ndescs; n++) values[n] = (desired_child >> n) & 1; - gpiod_set_array_cansleep(s->gpios->ndescs, s->gpios->desc, values); + gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc, + values); return 0; } diff --git a/kernel/drivers/net/phy/mdio-mux-mmioreg.c b/kernel/drivers/net/phy/mdio-mux-mmioreg.c index 2377c1341..7fde454fb 100644 --- a/kernel/drivers/net/phy/mdio-mux-mmioreg.c +++ b/kernel/drivers/net/phy/mdio-mux-mmioreg.c @@ -113,12 +113,14 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev) if (!iprop || len != sizeof(uint32_t)) { dev_err(&pdev->dev, "mdio-mux child node %s is " "missing a 'reg' property\n", np2->full_name); + of_node_put(np2); return -ENODEV; } if (be32_to_cpup(iprop) & ~s->mask) { dev_err(&pdev->dev, "mdio-mux child node %s has " "a 'reg' value with unmasked bits\n", np2->full_name); + of_node_put(np2); return -ENODEV; } } diff --git a/kernel/drivers/net/phy/mdio-mux.c b/kernel/drivers/net/phy/mdio-mux.c index 4d4d25efc..7f8e7662e 100644 --- a/kernel/drivers/net/phy/mdio-mux.c +++ b/kernel/drivers/net/phy/mdio-mux.c @@ -113,18 +113,18 @@ int mdio_mux_init(struct device *dev, if (!parent_bus_node) return -ENODEV; - parent_bus = of_mdio_find_bus(parent_bus_node); - if (parent_bus == NULL) { - ret_val = -EPROBE_DEFER; - goto err_parent_bus; - } - pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL); if (pb == NULL) { ret_val = -ENOMEM; goto err_parent_bus; } + parent_bus = of_mdio_find_bus(parent_bus_node); + if (parent_bus == NULL) { + ret_val = -EPROBE_DEFER; + goto err_parent_bus; + } + pb->switch_data = data; pb->switch_fn = switch_fn; pb->current_child = -1; @@ -144,13 +144,19 @@ int mdio_mux_init(struct device *dev, dev_err(dev, "Error: Failed to allocate memory for child\n"); ret_val = -ENOMEM; + of_node_put(child_bus_node); break; } cb->bus_number = v; cb->parent = pb; + cb->mii_bus = mdiobus_alloc(); + if (!cb->mii_bus) { + ret_val = -ENOMEM; + of_node_put(child_bus_node); + break; + } cb->mii_bus->priv = cb; - cb->mii_bus->irq = cb->phy_irq; cb->mii_bus->name = "mdio_mux"; snprintf(cb->mii_bus->id, MII_BUS_ID_SIZE, "%x.%x", @@ -173,6 +179,10 @@ int mdio_mux_init(struct device *dev, dev_info(dev, "Version " DRV_VERSION "\n"); return 0; } + + /* balance the reference of_mdio_find_bus() took */ + put_device(&pb->mii_bus->dev); + err_parent_bus: of_node_put(parent_bus_node); return ret_val; @@ -189,6 +199,9 @@ void mdio_mux_uninit(void *mux_handle) mdiobus_free(cb->mii_bus); cb = cb->next; } + + /* balance the reference of_mdio_find_bus() in mdio_mux_init() took */ + put_device(&pb->mii_bus->dev); } EXPORT_SYMBOL_GPL(mdio_mux_uninit); diff --git a/kernel/drivers/net/phy/mdio-octeon.c b/kernel/drivers/net/phy/mdio-octeon.c index c838ad615..fcf4e4df7 100644 --- a/kernel/drivers/net/phy/mdio-octeon.c +++ b/kernel/drivers/net/phy/mdio-octeon.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -14,11 +15,12 @@ #include #include +#ifdef CONFIG_CAVIUM_OCTEON_SOC #include -#include +#endif -#define DRV_VERSION "1.0" -#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver" +#define DRV_VERSION "1.1" +#define DRV_DESCRIPTION "Cavium Networks Octeon/ThunderX SMI/MDIO driver" #define SMI_CMD 0x0 #define SMI_WR_DAT 0x8 @@ -26,6 +28,79 @@ #define SMI_CLK 0x18 #define SMI_EN 0x20 +#ifdef __BIG_ENDIAN_BITFIELD +#define OCT_MDIO_BITFIELD_FIELD(field, more) \ + field; \ + more + +#else +#define OCT_MDIO_BITFIELD_FIELD(field, more) \ + more \ + field; + +#endif + +union cvmx_smix_clk { + u64 u64; + struct cvmx_smix_clk_s { + OCT_MDIO_BITFIELD_FIELD(u64 reserved_25_63:39, + OCT_MDIO_BITFIELD_FIELD(u64 mode:1, + OCT_MDIO_BITFIELD_FIELD(u64 reserved_21_23:3, + OCT_MDIO_BITFIELD_FIELD(u64 sample_hi:5, + OCT_MDIO_BITFIELD_FIELD(u64 sample_mode:1, + OCT_MDIO_BITFIELD_FIELD(u64 reserved_14_14:1, + OCT_MDIO_BITFIELD_FIELD(u64 clk_idle:1, + OCT_MDIO_BITFIELD_FIELD(u64 preamble:1, + OCT_MDIO_BITFIELD_FIELD(u64 sample:4, + OCT_MDIO_BITFIELD_FIELD(u64 phase:8, + ;)))))))))) + } s; +}; + +union cvmx_smix_cmd { + u64 u64; + struct cvmx_smix_cmd_s { + OCT_MDIO_BITFIELD_FIELD(u64 reserved_18_63:46, + OCT_MDIO_BITFIELD_FIELD(u64 phy_op:2, + OCT_MDIO_BITFIELD_FIELD(u64 reserved_13_15:3, + OCT_MDIO_BITFIELD_FIELD(u64 phy_adr:5, + OCT_MDIO_BITFIELD_FIELD(u64 reserved_5_7:3, + OCT_MDIO_BITFIELD_FIELD(u64 reg_adr:5, + ;)))))) + } s; +}; + +union cvmx_smix_en { + u64 u64; + struct cvmx_smix_en_s { + OCT_MDIO_BITFIELD_FIELD(u64 reserved_1_63:63, + OCT_MDIO_BITFIELD_FIELD(u64 en:1, + ;)) + } s; +}; + +union cvmx_smix_rd_dat { + u64 u64; + struct cvmx_smix_rd_dat_s { + OCT_MDIO_BITFIELD_FIELD(u64 reserved_18_63:46, + OCT_MDIO_BITFIELD_FIELD(u64 pending:1, + OCT_MDIO_BITFIELD_FIELD(u64 val:1, + OCT_MDIO_BITFIELD_FIELD(u64 dat:16, + ;)))) + } s; +}; + +union cvmx_smix_wr_dat { + u64 u64; + struct cvmx_smix_wr_dat_s { + OCT_MDIO_BITFIELD_FIELD(u64 reserved_18_63:46, + OCT_MDIO_BITFIELD_FIELD(u64 pending:1, + OCT_MDIO_BITFIELD_FIELD(u64 val:1, + OCT_MDIO_BITFIELD_FIELD(u64 dat:16, + ;)))) + } s; +}; + enum octeon_mdiobus_mode { UNINIT = 0, C22, @@ -41,6 +116,21 @@ struct octeon_mdiobus { int phy_irq[PHY_MAX_ADDR]; }; +#ifdef CONFIG_CAVIUM_OCTEON_SOC +static void oct_mdio_writeq(u64 val, u64 addr) +{ + cvmx_write_csr(addr, val); +} + +static u64 oct_mdio_readq(u64 addr) +{ + return cvmx_read_csr(addr); +} +#else +#define oct_mdio_writeq(val, addr) writeq_relaxed(val, (void *)addr) +#define oct_mdio_readq(addr) readq_relaxed((void *)addr) +#endif + static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p, enum octeon_mdiobus_mode m) { @@ -49,10 +139,10 @@ static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p, if (m == p->mode) return; - smi_clk.u64 = cvmx_read_csr(p->register_base + SMI_CLK); + smi_clk.u64 = oct_mdio_readq(p->register_base + SMI_CLK); smi_clk.s.mode = (m == C45) ? 1 : 0; smi_clk.s.preamble = 1; - cvmx_write_csr(p->register_base + SMI_CLK, smi_clk.u64); + oct_mdio_writeq(smi_clk.u64, p->register_base + SMI_CLK); p->mode = m; } @@ -67,7 +157,7 @@ static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p, smi_wr.u64 = 0; smi_wr.s.dat = regnum & 0xffff; - cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64); + oct_mdio_writeq(smi_wr.u64, p->register_base + SMI_WR_DAT); regnum = (regnum >> 16) & 0x1f; @@ -75,14 +165,14 @@ static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p, smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_45_ADDRESS */ smi_cmd.s.phy_adr = phy_id; smi_cmd.s.reg_adr = regnum; - cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); + oct_mdio_writeq(smi_cmd.u64, p->register_base + SMI_CMD); do { /* Wait 1000 clocks so we don't saturate the RSL bus * doing reads. */ __delay(1000); - smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT); + smi_wr.u64 = oct_mdio_readq(p->register_base + SMI_WR_DAT); } while (smi_wr.s.pending && --timeout); if (timeout <= 0) @@ -114,14 +204,14 @@ static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum) smi_cmd.s.phy_op = op; smi_cmd.s.phy_adr = phy_id; smi_cmd.s.reg_adr = regnum; - cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); + oct_mdio_writeq(smi_cmd.u64, p->register_base + SMI_CMD); do { /* Wait 1000 clocks so we don't saturate the RSL bus * doing reads. */ __delay(1000); - smi_rd.u64 = cvmx_read_csr(p->register_base + SMI_RD_DAT); + smi_rd.u64 = oct_mdio_readq(p->register_base + SMI_RD_DAT); } while (smi_rd.s.pending && --timeout); if (smi_rd.s.val) @@ -153,20 +243,20 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, smi_wr.u64 = 0; smi_wr.s.dat = val; - cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64); + oct_mdio_writeq(smi_wr.u64, p->register_base + SMI_WR_DAT); smi_cmd.u64 = 0; smi_cmd.s.phy_op = op; smi_cmd.s.phy_adr = phy_id; smi_cmd.s.reg_adr = regnum; - cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); + oct_mdio_writeq(smi_cmd.u64, p->register_base + SMI_CMD); do { /* Wait 1000 clocks so we don't saturate the RSL bus * doing reads. */ __delay(1000); - smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT); + smi_wr.u64 = oct_mdio_readq(p->register_base + SMI_WR_DAT); } while (smi_wr.s.pending && --timeout); if (timeout <= 0) @@ -187,30 +277,34 @@ static int octeon_mdiobus_probe(struct platform_device *pdev) return -ENOMEM; res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem == NULL) { dev_err(&pdev->dev, "found no memory resource\n"); - err = -ENXIO; - goto fail; + return -ENXIO; } + bus->mdio_phys = res_mem->start; bus->regsize = resource_size(res_mem); + if (!devm_request_mem_region(&pdev->dev, bus->mdio_phys, bus->regsize, res_mem->name)) { dev_err(&pdev->dev, "request_mem_region failed\n"); - goto fail; + return -ENXIO; } + bus->register_base = (u64)devm_ioremap(&pdev->dev, bus->mdio_phys, bus->regsize); + if (!bus->register_base) { + dev_err(&pdev->dev, "dev_ioremap failed\n"); + return -ENOMEM; + } bus->mii_bus = mdiobus_alloc(); - if (!bus->mii_bus) goto fail; smi_en.u64 = 0; smi_en.s.en = 1; - cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64); + oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN); bus->mii_bus->priv = bus; bus->mii_bus->irq = bus->phy_irq; @@ -234,7 +328,7 @@ fail_register: mdiobus_free(bus->mii_bus); fail: smi_en.u64 = 0; - cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64); + oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN); return err; } @@ -248,7 +342,7 @@ static int octeon_mdiobus_remove(struct platform_device *pdev) mdiobus_unregister(bus->mii_bus); mdiobus_free(bus->mii_bus); smi_en.u64 = 0; - cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64); + oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN); return 0; } diff --git a/kernel/drivers/net/phy/mdio_bus.c b/kernel/drivers/net/phy/mdio_bus.c index 095ef3fe3..88cb4592b 100644 --- a/kernel/drivers/net/phy/mdio_bus.c +++ b/kernel/drivers/net/phy/mdio_bus.c @@ -167,7 +167,9 @@ static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np) * of_mdio_find_bus - Given an mii_bus node, find the mii_bus. * @mdio_bus_np: Pointer to the mii_bus. * - * Returns a pointer to the mii_bus, or NULL if none found. + * Returns a reference to the mii_bus, or NULL if none found. The + * embedded struct device will have its reference count incremented, + * and this must be put once the bus is finished with. * * Because the association of a device_node and mii_bus is made via * of_mdiobus_register(), the mii_bus cannot be found before it is @@ -234,15 +236,18 @@ static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, #endif /** - * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus + * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus * @bus: target mii_bus + * @owner: module containing bus accessor functions * * Description: Called by a bus driver to bring up all the PHYs - * on a given bus, and attach them to the bus. + * on a given bus, and attach them to the bus. Drivers should use + * mdiobus_register() rather than __mdiobus_register() unless they + * need to pass a specific owner module. * * Returns 0 on success or < 0 on error. */ -int mdiobus_register(struct mii_bus *bus) +int __mdiobus_register(struct mii_bus *bus, struct module *owner) { int i, err; @@ -253,6 +258,7 @@ int mdiobus_register(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_ALLOCATED && bus->state != MDIOBUS_UNREGISTERED); + bus->owner = owner; bus->dev.parent = bus->parent; bus->dev.class = &mdio_bus_class; bus->dev.groups = NULL; @@ -288,13 +294,16 @@ int mdiobus_register(struct mii_bus *bus) error: while (--i >= 0) { - if (bus->phy_map[i]) - device_unregister(&bus->phy_map[i]->dev); + struct phy_device *phydev = bus->phy_map[i]; + if (phydev) { + phy_device_remove(phydev); + phy_device_free(phydev); + } } device_del(&bus->dev); return err; } -EXPORT_SYMBOL(mdiobus_register); +EXPORT_SYMBOL(__mdiobus_register); void mdiobus_unregister(struct mii_bus *bus) { @@ -303,12 +312,14 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { - if (bus->phy_map[i]) - device_unregister(&bus->phy_map[i]->dev); - bus->phy_map[i] = NULL; + struct phy_device *phydev = bus->phy_map[i]; + if (phydev) { + phy_device_remove(phydev); + phy_device_free(phydev); + } } + device_del(&bus->dev); } EXPORT_SYMBOL(mdiobus_unregister); @@ -360,6 +371,33 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) } EXPORT_SYMBOL(mdiobus_scan); +/** + * mdiobus_read_nested - Nested version of the mdiobus_read function + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to read + * + * In case of nested MDIO bus access avoid lockdep false positives by + * using mutex_lock_nested(). + * + * NOTE: MUST NOT be called from interrupt context, + * because the bus read/write functions may wait for an interrupt + * to conclude the operation. + */ +int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum) +{ + int retval; + + BUG_ON(in_interrupt()); + + mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING); + retval = bus->read(bus, addr, regnum); + mutex_unlock(&bus->mdio_lock); + + return retval; +} +EXPORT_SYMBOL(mdiobus_read_nested); + /** * mdiobus_read - Convenience function for reading a given MII mgmt register * @bus: the mii_bus struct @@ -384,6 +422,34 @@ int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum) } EXPORT_SYMBOL(mdiobus_read); +/** + * mdiobus_write_nested - Nested version of the mdiobus_write function + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to write + * @val: value to write to @regnum + * + * In case of nested MDIO bus access avoid lockdep false positives by + * using mutex_lock_nested(). + * + * NOTE: MUST NOT be called from interrupt context, + * because the bus read/write functions may wait for an interrupt + * to conclude the operation. + */ +int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val) +{ + int err; + + BUG_ON(in_interrupt()); + + mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING); + err = bus->write(bus, addr, regnum, val); + mutex_unlock(&bus->mdio_lock); + + return err; +} +EXPORT_SYMBOL(mdiobus_write_nested); + /** * mdiobus_write - Convenience function for writing a given MII mgmt register * @bus: the mii_bus struct @@ -421,6 +487,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) { struct phy_device *phydev = to_phy_device(dev); struct phy_driver *phydrv = to_phy_driver(drv); + const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids); + int i; if (of_driver_match_device(dev, drv)) return 1; @@ -428,8 +496,21 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv) if (phydrv->match_phy_device) return phydrv->match_phy_device(phydev); - return (phydrv->phy_id & phydrv->phy_id_mask) == - (phydev->phy_id & phydrv->phy_id_mask); + if (phydev->is_c45) { + for (i = 1; i < num_ids; i++) { + if (!(phydev->c45_ids.devices_in_package & (1 << i))) + continue; + + if ((phydrv->phy_id & phydrv->phy_id_mask) == + (phydev->c45_ids.device_ids[i] & + phydrv->phy_id_mask)) + return 1; + } + return 0; + } else { + return (phydrv->phy_id & phydrv->phy_id_mask) == + (phydev->phy_id & phydrv->phy_id_mask); + } } #ifdef CONFIG_PM diff --git a/kernel/drivers/net/phy/micrel.c b/kernel/drivers/net/phy/micrel.c index ebdc357c5..e13ad6cdc 100644 --- a/kernel/drivers/net/phy/micrel.c +++ b/kernel/drivers/net/phy/micrel.c @@ -288,9 +288,10 @@ static int kszphy_config_init(struct phy_device *phydev) } static int ksz9021_load_values_from_of(struct phy_device *phydev, - struct device_node *of_node, u16 reg, - char *field1, char *field2, - char *field3, char *field4) + const struct device_node *of_node, + u16 reg, + const char *field1, const char *field2, + const char *field3, const char *field4) { int val1 = -1; int val2 = -2; @@ -336,11 +337,20 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev, static int ksz9021_config_init(struct phy_device *phydev) { - struct device *dev = &phydev->dev; - struct device_node *of_node = dev->of_node; + const struct device *dev = &phydev->dev; + const struct device_node *of_node = dev->of_node; + const struct device *dev_walker; - if (!of_node && dev->parent->of_node) - of_node = dev->parent->of_node; + /* The Micrel driver has a deprecated option to place phy OF + * properties in the MAC node. Walk up the tree of devices to + * find a device with an OF node. + */ + dev_walker = &phydev->dev; + do { + of_node = dev_walker->of_node; + dev_walker = dev_walker->parent; + + } while (!of_node && dev_walker); if (of_node) { ksz9021_load_values_from_of(phydev, of_node, @@ -365,6 +375,11 @@ static int ksz9021_config_init(struct phy_device *phydev) #define KSZ9031_PS_TO_REG 60 /* Extended registers */ +/* MMD Address 0x0 */ +#define MII_KSZ9031RN_FLP_BURST_TX_LO 3 +#define MII_KSZ9031RN_FLP_BURST_TX_HI 4 + +/* MMD Address 0x2 */ #define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 #define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 #define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 @@ -389,9 +404,9 @@ static int ksz9031_extended_read(struct phy_device *phydev, } static int ksz9031_of_load_skew_values(struct phy_device *phydev, - struct device_node *of_node, + const struct device_node *of_node, u16 reg, size_t field_sz, - char *field[], u8 numfields) + const char *field[], u8 numfields) { int val[4] = {-1, -2, -3, -4}; int matches = 0; @@ -425,20 +440,36 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev, return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval); } +static int ksz9031_center_flp_timing(struct phy_device *phydev) +{ + int result; + + /* Center KSZ9031RNX FLP timing at 16ms. */ + result = ksz9031_extended_write(phydev, OP_DATA, 0, + MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006); + result = ksz9031_extended_write(phydev, OP_DATA, 0, + MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80); + + if (result) + return result; + + return genphy_restart_aneg(phydev); +} + static int ksz9031_config_init(struct phy_device *phydev) { - struct device *dev = &phydev->dev; - struct device_node *of_node = dev->of_node; - char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"}; - char *rx_data_skews[4] = { + const struct device *dev = &phydev->dev; + const struct device_node *of_node = dev->of_node; + static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"}; + static const char *rx_data_skews[4] = { "rxd0-skew-ps", "rxd1-skew-ps", "rxd2-skew-ps", "rxd3-skew-ps" }; - char *tx_data_skews[4] = { + static const char *tx_data_skews[4] = { "txd0-skew-ps", "txd1-skew-ps", "txd2-skew-ps", "txd3-skew-ps" }; - char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"}; + static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"}; if (!of_node && dev->parent->of_node) of_node = dev->parent->of_node; @@ -460,7 +491,8 @@ static int ksz9031_config_init(struct phy_device *phydev) MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, tx_data_skews, 4); } - return 0; + + return ksz9031_center_flp_timing(phydev); } #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 @@ -491,6 +523,27 @@ static int ksz8873mll_read_status(struct phy_device *phydev) return 0; } +static int ksz9031_read_status(struct phy_device *phydev) +{ + int err; + int regval; + + err = genphy_read_status(phydev); + if (err) + return err; + + /* Make sure the PHY is not broken. Read idle error count, + * and reset the PHY if it is maxed out. + */ + regval = phy_read(phydev, MII_STAT1000); + if ((regval & 0xFF) == 0xFF) { + phy_init_hw(phydev); + phydev->link = 0; + } + + return 0; +} + static int ksz8873mll_config_aneg(struct phy_device *phydev) { return 0; @@ -519,7 +572,7 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, static int kszphy_probe(struct phy_device *phydev) { const struct kszphy_type *type = phydev->drv->driver_data; - struct device_node *np = phydev->dev.of_node; + const struct device_node *np = phydev->dev.of_node; struct kszphy_priv *priv; struct clk *clk; int ret; @@ -749,7 +802,7 @@ static struct phy_driver ksphy_driver[] = { .driver_data = &ksz9021_type, .config_init = ksz9031_config_init, .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = ksz9031_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, .suspend = genphy_suspend, diff --git a/kernel/drivers/net/phy/microchip.c b/kernel/drivers/net/phy/microchip.c new file mode 100644 index 000000000..c0a20ebd0 --- /dev/null +++ b/kernel/drivers/net/phy/microchip.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2015 Microchip Technology + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ +#include +#include +#include +#include +#include +#include + +#define DRIVER_AUTHOR "WOOJUNG HUH " +#define DRIVER_DESC "Microchip LAN88XX PHY driver" + +struct lan88xx_priv { + int chip_id; + int chip_rev; + __u32 wolopts; +}; + +static int lan88xx_phy_config_intr(struct phy_device *phydev) +{ + int rc; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + /* unmask all source and clear them before enable */ + rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF); + rc = phy_read(phydev, LAN88XX_INT_STS); + rc = phy_write(phydev, LAN88XX_INT_MASK, + LAN88XX_INT_MASK_MDINTPIN_EN_ | + LAN88XX_INT_MASK_LINK_CHANGE_); + } else { + rc = phy_write(phydev, LAN88XX_INT_MASK, 0); + } + + return rc < 0 ? rc : 0; +} + +static int lan88xx_phy_ack_interrupt(struct phy_device *phydev) +{ + int rc = phy_read(phydev, LAN88XX_INT_STS); + + return rc < 0 ? rc : 0; +} + +int lan88xx_suspend(struct phy_device *phydev) +{ + struct lan88xx_priv *priv = phydev->priv; + + /* do not power down PHY when WOL is enabled */ + if (!priv->wolopts) + genphy_suspend(phydev); + + return 0; +} + +static int lan88xx_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct lan88xx_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->wolopts = 0; + + /* these values can be used to identify internal PHY */ + priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, + 3, phydev->addr); + priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV, + 3, phydev->addr); + + phydev->priv = priv; + + return 0; +} + +static void lan88xx_remove(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct lan88xx_priv *priv = phydev->priv; + + if (priv) + devm_kfree(dev, priv); +} + +static int lan88xx_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + struct lan88xx_priv *priv = phydev->priv; + + priv->wolopts = wol->wolopts; + + return 0; +} + +static struct phy_driver microchip_phy_driver[] = { +{ + .phy_id = 0x0007c130, + .phy_id_mask = 0xfffffff0, + .name = "Microchip LAN88xx", + + .features = (PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + + .probe = lan88xx_probe, + .remove = lan88xx_remove, + + .config_init = genphy_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + + .ack_interrupt = lan88xx_phy_ack_interrupt, + .config_intr = lan88xx_phy_config_intr, + + .suspend = lan88xx_suspend, + .resume = genphy_resume, + .set_wol = lan88xx_set_wol, + + .driver = { .owner = THIS_MODULE, } +} }; + +module_phy_driver(microchip_phy_driver); + +static struct mdio_device_id __maybe_unused microchip_tbl[] = { + { 0x0007c130, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, microchip_tbl); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/net/phy/phy.c b/kernel/drivers/net/phy/phy.c index 47cd57805..47cd306db 100644 --- a/kernel/drivers/net/phy/phy.c +++ b/kernel/drivers/net/phy/phy.c @@ -58,6 +58,31 @@ static const char *phy_speed_to_str(int speed) } } +#define PHY_STATE_STR(_state) \ + case PHY_##_state: \ + return __stringify(_state); \ + +static const char *phy_state_to_str(enum phy_state st) +{ + switch (st) { + PHY_STATE_STR(DOWN) + PHY_STATE_STR(STARTING) + PHY_STATE_STR(READY) + PHY_STATE_STR(PENDING) + PHY_STATE_STR(UP) + PHY_STATE_STR(AN) + PHY_STATE_STR(RUNNING) + PHY_STATE_STR(NOLINK) + PHY_STATE_STR(FORCING) + PHY_STATE_STR(CHANGELINK) + PHY_STATE_STR(HALTED) + PHY_STATE_STR(RESUMING) + } + + return NULL; +} + + /** * phy_print_status - Convenience function to print out the current phy status * @phydev: the phy_device struct @@ -328,6 +353,8 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) phydev->duplex = cmd->duplex; + phydev->mdix = cmd->eth_tp_mdix_ctrl; + /* Restart the PHY */ phy_start_aneg(phydev); @@ -352,6 +379,7 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) cmd->transceiver = phy_is_internal(phydev) ? XCVR_INTERNAL : XCVR_EXTERNAL; cmd->autoneg = phydev->autoneg; + cmd->eth_tp_mdix_ctrl = phydev->mdix; return 0; } @@ -420,7 +448,8 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) mdiobus_write(phydev->bus, mii_data->phy_id, mii_data->reg_num, val); - if (mii_data->reg_num == MII_BMCR && + if (mii_data->phy_id == phydev->addr && + mii_data->reg_num == MII_BMCR && val & BMCR_RESET) return phy_init_hw(phydev); @@ -784,10 +813,14 @@ void phy_state_machine(struct work_struct *work) struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); bool needs_aneg = false, do_suspend = false; + enum phy_state old_state; int err = 0; + int old_link; mutex_lock(&phydev->lock); + old_state = phydev->state; + if (phydev->drv->link_change_notify) phydev->drv->link_change_notify(phydev); @@ -831,6 +864,9 @@ void phy_state_machine(struct work_struct *work) needs_aneg = true; break; case PHY_NOLINK: + if (phy_interrupt_is_valid(phydev)) + break; + err = phy_read_status(phydev); if (err) break; @@ -868,11 +904,18 @@ void phy_state_machine(struct work_struct *work) phydev->adjust_link(phydev->attached_dev); break; case PHY_RUNNING: - /* Only register a CHANGE if we are - * polling or ignoring interrupts + /* Only register a CHANGE if we are polling or ignoring + * interrupts and link changed since latest checking. */ - if (!phy_interrupt_is_valid(phydev)) - phydev->state = PHY_CHANGELINK; + if (!phy_interrupt_is_valid(phydev)) { + old_link = phydev->link; + err = phy_read_status(phydev); + if (err) + break; + + if (old_link != phydev->link) + phydev->state = PHY_CHANGELINK; + } break; case PHY_CHANGELINK: err = phy_read_status(phydev); @@ -952,6 +995,9 @@ void phy_state_machine(struct work_struct *work) if (err < 0) phy_error(phydev); + dev_dbg(&phydev->dev, "PHY state change %s -> %s\n", + phy_state_to_str(old_state), phy_state_to_str(phydev->state)); + queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, PHY_STATE_TIME * HZ); } @@ -998,11 +1044,15 @@ int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, struct phy_driver *phydrv = phydev->drv; int value = -1; - if (phydrv->read_mmd_indirect == NULL) { - mmd_phy_indirect(phydev->bus, prtad, devad, addr); + if (!phydrv->read_mmd_indirect) { + struct mii_bus *bus = phydev->bus; + + mutex_lock(&bus->mdio_lock); + mmd_phy_indirect(bus, prtad, devad, addr); /* Read the content of the MMD's selected register */ - value = phydev->bus->read(phydev->bus, addr, MII_MMD_DATA); + value = bus->read(bus, addr, MII_MMD_DATA); + mutex_unlock(&bus->mdio_lock); } else { value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr); } @@ -1031,11 +1081,15 @@ void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, { struct phy_driver *phydrv = phydev->drv; - if (phydrv->write_mmd_indirect == NULL) { - mmd_phy_indirect(phydev->bus, prtad, devad, addr); + if (!phydrv->write_mmd_indirect) { + struct mii_bus *bus = phydev->bus; + + mutex_lock(&bus->mdio_lock); + mmd_phy_indirect(bus, prtad, devad, addr); /* Write the data into MMD's selected register */ - phydev->bus->write(phydev->bus, addr, MII_MMD_DATA, data); + bus->write(bus, addr, MII_MMD_DATA, data); + mutex_unlock(&bus->mdio_lock); } else { phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data); } @@ -1062,8 +1116,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) if ((phydev->duplex == DUPLEX_FULL) && ((phydev->interface == PHY_INTERFACE_MODE_MII) || (phydev->interface == PHY_INTERFACE_MODE_GMII) || - (phydev->interface >= PHY_INTERFACE_MODE_RGMII && - phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) || + phy_interface_is_rgmii(phydev) || phy_is_internal(phydev))) { int eee_lp, eee_cap, eee_adv; u32 lp, cap, adv; diff --git a/kernel/drivers/net/phy/phy_device.c b/kernel/drivers/net/phy/phy_device.c index d551df62e..0bfbabad4 100644 --- a/kernel/drivers/net/phy/phy_device.c +++ b/kernel/drivers/net/phy/phy_device.c @@ -156,8 +156,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, /* We allocate the device, and initialize the default values */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (NULL == dev) - return (struct phy_device *)PTR_ERR((void *)-ENOMEM); + if (!dev) + return ERR_PTR(-ENOMEM); dev->dev.release = phy_device_release; @@ -176,9 +176,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, if (c45_ids) dev->c45_ids = *c45_ids; dev->bus = bus; - dev->dev.parent = bus->parent; + dev->dev.parent = &bus->dev; dev->dev.bus = &mdio_bus_type; - dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL; + dev->irq = bus->irq ? bus->irq[addr] : PHY_POLL; dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr); dev->state = PHY_DOWN; @@ -205,6 +205,37 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, } EXPORT_SYMBOL(phy_device_create); +/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @dev_addr: MMD address in the PHY. + * @devices_in_package: where to store the devices in package information. + * + * Description: reads devices in package registers of a MMD at @dev_addr + * from PHY at @addr on @bus. + * + * Returns: 0 on success, -EIO on failure. + */ +static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, + u32 *devices_in_package) +{ + int phy_reg, reg_addr; + + reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + *devices_in_package = (phy_reg & 0xffff) << 16; + + reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + *devices_in_package |= (phy_reg & 0xffff); + + return 0; +} + /** * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. * @bus: the target MII bus @@ -223,31 +254,32 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, int phy_reg; int i, reg_addr; const int num_ids = ARRAY_SIZE(c45_ids->device_ids); + u32 *devs = &c45_ids->devices_in_package; - /* Find first non-zero Devices In package. Device - * zero is reserved, so don't probe it. + /* Find first non-zero Devices In package. Device zero is reserved + * for 802.3 c45 complied PHYs, so don't probe it at first. */ - for (i = 1; - i < num_ids && c45_ids->devices_in_package == 0; - i++) { - reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2; - phy_reg = mdiobus_read(bus, addr, reg_addr); - if (phy_reg < 0) - return -EIO; - c45_ids->devices_in_package = (phy_reg & 0xffff) << 16; - - reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS1; - phy_reg = mdiobus_read(bus, addr, reg_addr); + for (i = 1; i < num_ids && *devs == 0; i++) { + phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs); if (phy_reg < 0) return -EIO; - c45_ids->devices_in_package |= (phy_reg & 0xffff); - /* If mostly Fs, there is no device there, - * let's get out of here. - */ - if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) { - *phy_id = 0xffffffff; - return 0; + if ((*devs & 0x1fffffff) == 0x1fffffff) { + /* If mostly Fs, there is no device there, + * then let's continue to probe more, as some + * 10G PHYs have zero Devices In package, + * e.g. Cortina CS4315/CS4340 PHY. + */ + phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs); + if (phy_reg < 0) + return -EIO; + /* no device there, let's get out of here */ + if ((*devs & 0x1fffffff) == 0x1fffffff) { + *phy_id = 0xffffffff; + return 0; + } else { + break; + } } } @@ -375,6 +407,24 @@ int phy_device_register(struct phy_device *phydev) } EXPORT_SYMBOL(phy_device_register); +/** + * phy_device_remove - Remove a previously registered phy device from the MDIO bus + * @phydev: phy_device structure to remove + * + * This doesn't free the phy_device itself, it merely reverses the effects + * of phy_device_register(). Use phy_device_free() to free the device + * after calling this function. + */ +void phy_device_remove(struct phy_device *phydev) +{ + struct mii_bus *bus = phydev->bus; + int addr = phydev->addr; + + device_del(&phydev->dev); + bus->phy_map[addr] = NULL; +} +EXPORT_SYMBOL(phy_device_remove); + /** * phy_find_first - finds the first PHY device on the bus * @bus: the target MII bus @@ -570,18 +620,26 @@ EXPORT_SYMBOL(phy_init_hw); * generic driver is used. The phy_device is given a ptr to * the attaching device, and given a callback for link status * change. The phy_device is returned to the attaching driver. + * This function takes a reference on the phy device. */ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface) { + struct mii_bus *bus = phydev->bus; struct device *d = &phydev->dev; - struct module *bus_module; int err; + if (!try_module_get(bus->owner)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + + get_device(d); + /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ - if (NULL == d->driver) { + if (!d->driver) { if (phydev->is_c45) d->driver = &genphy_driver[GENPHY_DRV_10G].driver; else @@ -592,20 +650,13 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, err = device_bind_driver(d); if (err) - return err; + goto error; } if (phydev->attached_dev) { dev_err(&dev->dev, "PHY already attached\n"); - return -EBUSY; - } - - /* Increment the bus module reference count */ - bus_module = phydev->bus->dev.driver ? - phydev->bus->dev.driver->owner : NULL; - if (!try_module_get(bus_module)) { - dev_err(&dev->dev, "failed to get the bus module\n"); - return -EIO; + err = -EBUSY; + goto error; } phydev->attached_dev = dev; @@ -628,6 +679,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phy_resume(phydev); return err; + +error: + put_device(d); + module_put(bus->owner); + return err; } EXPORT_SYMBOL(phy_attach_direct); @@ -669,14 +725,15 @@ EXPORT_SYMBOL(phy_attach); /** * phy_detach - detach a PHY device from its network device * @phydev: target phy_device struct + * + * This detaches the phy device from its network device and the phy + * driver, and drops the reference count taken in phy_attach_direct(). */ void phy_detach(struct phy_device *phydev) { + struct mii_bus *bus; int i; - if (phydev->bus->dev.driver) - module_put(phydev->bus->dev.driver->owner); - phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; phy_suspend(phydev); @@ -692,6 +749,15 @@ void phy_detach(struct phy_device *phydev) break; } } + + /* + * The phydev might go away on the put_device() below, so avoid + * a use-after-free bug by reading the underlying bus first. + */ + bus = phydev->bus; + + put_device(&phydev->dev); + module_put(bus->owner); } EXPORT_SYMBOL(phy_detach); @@ -1197,6 +1263,44 @@ static int gen10g_resume(struct phy_device *phydev) return 0; } +static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) +{ + /* The default values for phydev->supported are provided by the PHY + * driver "features" member, we want to reset to sane defaults first + * before supporting higher speeds. + */ + phydev->supported &= PHY_DEFAULT_FEATURES; + + switch (max_speed) { + default: + return -ENOTSUPP; + case SPEED_1000: + phydev->supported |= PHY_1000BT_FEATURES; + /* fall through */ + case SPEED_100: + phydev->supported |= PHY_100BT_FEATURES; + /* fall through */ + case SPEED_10: + phydev->supported |= PHY_10BT_FEATURES; + } + + return 0; +} + +int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) +{ + int err; + + err = __set_phy_supported(phydev, max_speed); + if (err) + return err; + + phydev->advertising = phydev->supported; + + return 0; +} +EXPORT_SYMBOL(phy_set_max_speed); + static void of_set_phy_supported(struct phy_device *phydev) { struct device_node *node = phydev->dev.of_node; @@ -1208,25 +1312,8 @@ static void of_set_phy_supported(struct phy_device *phydev) if (!node) return; - if (!of_property_read_u32(node, "max-speed", &max_speed)) { - /* The default values for phydev->supported are provided by the PHY - * driver "features" member, we want to reset to sane defaults fist - * before supporting higher speeds. - */ - phydev->supported &= PHY_DEFAULT_FEATURES; - - switch (max_speed) { - default: - return; - - case SPEED_1000: - phydev->supported |= PHY_1000BT_FEATURES; - case SPEED_100: - phydev->supported |= PHY_100BT_FEATURES; - case SPEED_10: - phydev->supported |= PHY_10BT_FEATURES; - } - } + if (!of_property_read_u32(node, "max-speed", &max_speed)) + __set_phy_supported(phydev, max_speed); } /** diff --git a/kernel/drivers/net/phy/realtek.c b/kernel/drivers/net/phy/realtek.c index 96a0f0fab..43ab69136 100644 --- a/kernel/drivers/net/phy/realtek.c +++ b/kernel/drivers/net/phy/realtek.c @@ -22,8 +22,12 @@ #define RTL821x_INER 0x12 #define RTL821x_INER_INIT 0x6400 #define RTL821x_INSR 0x13 +#define RTL8211E_INER_LINK_STATUS 0x400 -#define RTL8211E_INER_LINK_STATUS 0x400 +#define RTL8211F_INER_LINK_STATUS 0x0010 +#define RTL8211F_INSR 0x1d +#define RTL8211F_PAGE_SELECT 0x1f +#define RTL8211F_TX_DELAY 0x100 MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); @@ -38,6 +42,18 @@ static int rtl821x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } +static int rtl8211f_ack_interrupt(struct phy_device *phydev) +{ + int err; + + phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43); + err = phy_read(phydev, RTL8211F_INSR); + /* restore to default page 0 */ + phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0); + + return (err < 0) ? err : 0; +} + static int rtl8211b_config_intr(struct phy_device *phydev) { int err; @@ -64,6 +80,41 @@ static int rtl8211e_config_intr(struct phy_device *phydev) return err; } +static int rtl8211f_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_write(phydev, RTL821x_INER, + RTL8211F_INER_LINK_STATUS); + else + err = phy_write(phydev, RTL821x_INER, 0); + + return err; +} + +static int rtl8211f_config_init(struct phy_device *phydev) +{ + int ret; + u16 reg; + + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { + /* enable TXDLY */ + phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08); + reg = phy_read(phydev, 0x11); + reg |= RTL8211F_TX_DELAY; + phy_write(phydev, 0x11, reg); + /* restore to default page 0 */ + phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0); + } + + return 0; +} + static struct phy_driver realtek_drvs[] = { { .phy_id = 0x00008201, @@ -85,6 +136,19 @@ static struct phy_driver realtek_drvs[] = { .ack_interrupt = &rtl821x_ack_interrupt, .config_intr = &rtl8211b_config_intr, .driver = { .owner = THIS_MODULE,}, + }, { + .phy_id = 0x001cc914, + .name = "RTL8211DN Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = rtl821x_ack_interrupt, + .config_intr = rtl8211e_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = 0x001cc915, .name = "RTL8211E Gigabit Ethernet", @@ -98,6 +162,20 @@ static struct phy_driver realtek_drvs[] = { .suspend = genphy_suspend, .resume = genphy_resume, .driver = { .owner = THIS_MODULE,}, + }, { + .phy_id = 0x001cc916, + .name = "RTL8211F Gigabit Ethernet", + .phy_id_mask = 0x001fffff, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .config_init = &rtl8211f_config_init, + .read_status = &genphy_read_status, + .ack_interrupt = &rtl8211f_ack_interrupt, + .config_intr = &rtl8211f_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE }, }, }; @@ -105,7 +183,9 @@ module_phy_driver(realtek_drvs); static struct mdio_device_id __maybe_unused realtek_tbl[] = { { 0x001cc912, 0x001fffff }, + { 0x001cc914, 0x001fffff }, { 0x001cc915, 0x001fffff }, + { 0x001cc916, 0x001fffff }, { } }; diff --git a/kernel/drivers/net/phy/smsc.c b/kernel/drivers/net/phy/smsc.c index c0f6479e1..dc2da8770 100644 --- a/kernel/drivers/net/phy/smsc.c +++ b/kernel/drivers/net/phy/smsc.c @@ -43,16 +43,25 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev) static int smsc_phy_config_init(struct phy_device *phydev) { + int __maybe_unused len; + struct device *dev __maybe_unused = &phydev->dev; + struct device_node *of_node __maybe_unused = dev->of_node; int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + int enable_energy = 1; if (rc < 0) return rc; - /* Enable energy detect mode for this SMSC Transceivers */ - rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, - rc | MII_LAN83C185_EDPWRDOWN); - if (rc < 0) - return rc; + if (of_find_property(of_node, "smsc,disable-energy-detect", &len)) + enable_energy = 0; + + if (enable_energy) { + /* Enable energy detect mode for this SMSC Transceivers */ + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, + rc | MII_LAN83C185_EDPWRDOWN); + if (rc < 0) + return rc; + } return smsc_phy_ack_interrupt(phydev); } @@ -91,19 +100,18 @@ static int lan911x_config_init(struct phy_device *phydev) } /* - * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each - * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner - * does send the pulses within this interval, the PHY will remained powered - * down. - * - * This workaround will manually toggle the PHY on/off upon calls to read_status - * in order to generate link test pulses if the link is down. If a link partner - * is present, it will respond to the pulses, which will cause the ENERGYON bit - * to be set and will cause the EDPD mode to be exited. + * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable + * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to + * unstable detection of plugging in Ethernet cable. + * This workaround disables Energy Detect Power-Down mode and waiting for + * response on link pulses to detect presence of plugged Ethernet cable. + * The Energy Detect Power-Down mode is enabled again in the end of procedure to + * save approximately 220 mW of power if cable is unplugged. */ static int lan87xx_read_status(struct phy_device *phydev) { int err = genphy_read_status(phydev); + int i; if (!phydev->link) { /* Disable EDPD to wake up PHY */ @@ -116,8 +124,16 @@ static int lan87xx_read_status(struct phy_device *phydev) if (rc < 0) return rc; - /* Sleep 64 ms to allow ~5 link test pulses to be sent */ - msleep(64); + /* Wait max 640 ms to detect energy */ + for (i = 0; i < 64; i++) { + /* Sleep to allow link test pulses to be sent */ + msleep(10); + rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + if (rc & MII_LAN83C185_ENERGYON) + break; + } /* Re-enable EDPD */ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); @@ -191,7 +207,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = lan87xx_read_status, .config_init = smsc_phy_config_init, .soft_reset = smsc_phy_reset, diff --git a/kernel/drivers/net/phy/spi_ks8995.c b/kernel/drivers/net/phy/spi_ks8995.c index 465301592..c72c42206 100644 --- a/kernel/drivers/net/phy/spi_ks8995.c +++ b/kernel/drivers/net/phy/spi_ks8995.c @@ -209,8 +209,6 @@ static int ks8995_reset(struct ks8995_switch *ks) return ks8995_start(ks); } -/* ------------------------------------------------------------------------ */ - static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { @@ -220,19 +218,9 @@ static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); ks8995 = dev_get_drvdata(dev); - if (unlikely(off > ks8995->regs_attr.size)) - return 0; - - if ((off + count) > ks8995->regs_attr.size) - count = ks8995->regs_attr.size - off; - - if (unlikely(!count)) - return count; - return ks8995_read(ks8995, buf, off, count); } - static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { @@ -242,19 +230,9 @@ static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj, dev = container_of(kobj, struct device, kobj); ks8995 = dev_get_drvdata(dev); - if (unlikely(off >= ks8995->regs_attr.size)) - return -EFBIG; - - if ((off + count) > ks8995->regs_attr.size) - count = ks8995->regs_attr.size - off; - - if (unlikely(!count)) - return count; - return ks8995_write(ks8995, buf, off, count); } - static const struct bin_attribute ks8995_registers_attr = { .attr = { .name = "registers", @@ -365,7 +343,6 @@ static int ks8995_remove(struct spi_device *spi) static struct spi_driver ks8995_driver = { .driver = { .name = "spi-ks8995", - .owner = THIS_MODULE, }, .probe = ks8995_probe, .remove = ks8995_remove, diff --git a/kernel/drivers/net/phy/teranetics.c b/kernel/drivers/net/phy/teranetics.c new file mode 100644 index 000000000..07463fcca --- /dev/null +++ b/kernel/drivers/net/phy/teranetics.c @@ -0,0 +1,122 @@ +/* + * Driver for Teranetics PHY + * + * Author: Shaohui Xie + * + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Teranetics PHY driver"); +MODULE_AUTHOR("Shaohui Xie "); +MODULE_LICENSE("GPL v2"); + +#define PHY_ID_TN2020 0x00a19410 +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 + +#define MDIO_PHYXS_LANE_READY (MDIO_PHYXS_LNSTAT_SYNC0 | \ + MDIO_PHYXS_LNSTAT_SYNC1 | \ + MDIO_PHYXS_LNSTAT_SYNC2 | \ + MDIO_PHYXS_LNSTAT_SYNC3 | \ + MDIO_PHYXS_LNSTAT_ALIGN) + +static int teranetics_config_init(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; + + return 0; +} + +static int teranetics_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int teranetics_aneg_done(struct phy_device *phydev) +{ + int reg; + + /* auto negotiation state can only be checked when using copper + * port, if using fiber port, just lie it's done. + */ + if (!phy_read_mmd(phydev, MDIO_MMD_VEND1, 93)) { + reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + return (reg < 0) ? reg : (reg & BMSR_ANEGCOMPLETE); + } + + return 1; +} + +static int teranetics_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static int teranetics_read_status(struct phy_device *phydev) +{ + int reg; + + phydev->link = 1; + + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + if (!phy_read_mmd(phydev, MDIO_MMD_VEND1, 93)) { + reg = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_LNSTAT); + if (reg < 0 || + !((reg & MDIO_PHYXS_LANE_READY) == MDIO_PHYXS_LANE_READY)) { + phydev->link = 0; + return 0; + } + + reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + } + + return 0; +} + +static int teranetics_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[3] == PHY_ID_TN2020; +} + +static struct phy_driver teranetics_driver[] = { +{ + .phy_id = PHY_ID_TN2020, + .phy_id_mask = 0xffffffff, + .name = "Teranetics TN2020", + .soft_reset = teranetics_soft_reset, + .aneg_done = teranetics_aneg_done, + .config_init = teranetics_config_init, + .config_aneg = teranetics_config_aneg, + .read_status = teranetics_read_status, + .match_phy_device = teranetics_match_phy_device, + .driver = { .owner = THIS_MODULE,}, +}, +}; + +module_phy_driver(teranetics_driver); + +static struct mdio_device_id __maybe_unused teranetics_tbl[] = { + { PHY_ID_TN2020, 0xffffffff }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, teranetics_tbl); diff --git a/kernel/drivers/net/phy/vitesse.c b/kernel/drivers/net/phy/vitesse.c index 76cad712d..dd295dbaa 100644 --- a/kernel/drivers/net/phy/vitesse.c +++ b/kernel/drivers/net/phy/vitesse.c @@ -66,6 +66,7 @@ #define PHY_ID_VSC8244 0x000fc6c0 #define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8574 0x000704a0 +#define PHY_ID_VSC8601 0x00070420 #define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 #define PHY_ID_VSC8211 0x000fc4b0 @@ -133,7 +134,8 @@ static int vsc82xx_config_intr(struct phy_device *phydev) (phydev->drv->phy_id == PHY_ID_VSC8234 || phydev->drv->phy_id == PHY_ID_VSC8244 || phydev->drv->phy_id == PHY_ID_VSC8514 || - phydev->drv->phy_id == PHY_ID_VSC8574) ? + phydev->drv->phy_id == PHY_ID_VSC8574 || + phydev->drv->phy_id == PHY_ID_VSC8601) ? MII_VSC8244_IMASK_MASK : MII_VSC8221_IMASK_MASK); else { @@ -271,6 +273,18 @@ static struct phy_driver vsc82xx_driver[] = { .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8601, + .name = "Vitesse VSC8601", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &genphy_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_VSC8662, .name = "Vitesse VSC8662", -- cgit 1.2.3-korg