From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/net/ethernet/xilinx/Kconfig | 44 + kernel/drivers/net/ethernet/xilinx/Makefile | 9 + kernel/drivers/net/ethernet/xilinx/ll_temac.h | 385 +++++ kernel/drivers/net/ethernet/xilinx/ll_temac_main.c | 1182 ++++++++++++++ kernel/drivers/net/ethernet/xilinx/ll_temac_mdio.c | 122 ++ .../drivers/net/ethernet/xilinx/xilinx_axienet.h | 504 ++++++ .../net/ethernet/xilinx/xilinx_axienet_main.c | 1654 ++++++++++++++++++++ .../net/ethernet/xilinx/xilinx_axienet_mdio.c | 239 +++ .../drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1258 +++++++++++++++ 9 files changed, 5397 insertions(+) create mode 100644 kernel/drivers/net/ethernet/xilinx/Kconfig create mode 100644 kernel/drivers/net/ethernet/xilinx/Makefile create mode 100644 kernel/drivers/net/ethernet/xilinx/ll_temac.h create mode 100644 kernel/drivers/net/ethernet/xilinx/ll_temac_main.c create mode 100644 kernel/drivers/net/ethernet/xilinx/ll_temac_mdio.c create mode 100644 kernel/drivers/net/ethernet/xilinx/xilinx_axienet.h create mode 100644 kernel/drivers/net/ethernet/xilinx/xilinx_axienet_main.c create mode 100644 kernel/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c create mode 100644 kernel/drivers/net/ethernet/xilinx/xilinx_emaclite.c (limited to 'kernel/drivers/net/ethernet/xilinx') diff --git a/kernel/drivers/net/ethernet/xilinx/Kconfig b/kernel/drivers/net/ethernet/xilinx/Kconfig new file mode 100644 index 000000000..7b90a5eba --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/Kconfig @@ -0,0 +1,44 @@ +# +# Xilink device configuration +# + +config NET_VENDOR_XILINX + bool "Xilinx devices" + default y + depends on PPC || PPC32 || MICROBLAZE || ARCH_ZYNQ + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Xilinx devices. If you say Y, you will be asked + for your specific card in the following questions. + +if NET_VENDOR_XILINX + +config XILINX_EMACLITE + tristate "Xilinx 10/100 Ethernet Lite support" + depends on (PPC32 || MICROBLAZE || ARCH_ZYNQ) + select PHYLIB + ---help--- + This driver supports the 10/100 Ethernet Lite from Xilinx. + +config XILINX_AXI_EMAC + tristate "Xilinx 10/100/1000 AXI Ethernet support" + depends on MICROBLAZE + select PHYLIB + ---help--- + This driver supports the 10/100/1000 Ethernet from Xilinx for the + AXI bus interface used in Xilinx Virtex FPGAs. + +config XILINX_LL_TEMAC + tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" + depends on (PPC || MICROBLAZE) + select PHYLIB + ---help--- + This driver supports the Xilinx 10/100/1000 LocalLink TEMAC + core used in Xilinx Spartan and Virtex FPGAs + +endif # NET_VENDOR_XILINX diff --git a/kernel/drivers/net/ethernet/xilinx/Makefile b/kernel/drivers/net/ethernet/xilinx/Makefile new file mode 100644 index 000000000..214205e97 --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the Xilink network device drivers. +# + +ll_temac-objs := ll_temac_main.o ll_temac_mdio.o +obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o +obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o +xilinx_emac-objs := xilinx_axienet_main.o xilinx_axienet_mdio.o +obj-$(CONFIG_XILINX_AXI_EMAC) += xilinx_emac.o diff --git a/kernel/drivers/net/ethernet/xilinx/ll_temac.h b/kernel/drivers/net/ethernet/xilinx/ll_temac.h new file mode 100644 index 000000000..522abe2ff --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/ll_temac.h @@ -0,0 +1,385 @@ + +#ifndef XILINX_LL_TEMAC_H +#define XILINX_LL_TEMAC_H + +#include +#include +#include + +#ifdef CONFIG_PPC_DCR +#include +#include +#endif + +/* packet size info */ +#define XTE_HDR_SIZE 14 /* size of Ethernet header */ +#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */ +#define XTE_JUMBO_MTU 9000 +#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE) + +/* Configuration options */ + +/* Accept all incoming packets. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_PROMISC (1 << 0) +/* Jumbo frame support for Tx & Rx. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_JUMBO (1 << 1) +/* VLAN Rx & Tx frame support. + * This option defaults to disabled (cleared) */ +#define XTE_OPTION_VLAN (1 << 2) +/* Enable recognition of flow control frames on Rx + * This option defaults to enabled (set) */ +#define XTE_OPTION_FLOW_CONTROL (1 << 4) +/* Strip FCS and PAD from incoming frames. + * Note: PAD from VLAN frames is not stripped. + * This option defaults to disabled (set) */ +#define XTE_OPTION_FCS_STRIP (1 << 5) +/* Generate FCS field and add PAD automatically for outgoing frames. + * This option defaults to enabled (set) */ +#define XTE_OPTION_FCS_INSERT (1 << 6) +/* Enable Length/Type error checking for incoming frames. When this option is +set, the MAC will filter frames that have a mismatched type/length field +and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these +types of frames are encountered. When this option is cleared, the MAC will +allow these types of frames to be received. +This option defaults to enabled (set) */ +#define XTE_OPTION_LENTYPE_ERR (1 << 7) +/* Enable the transmitter. + * This option defaults to enabled (set) */ +#define XTE_OPTION_TXEN (1 << 11) +/* Enable the receiver +* This option defaults to enabled (set) */ +#define XTE_OPTION_RXEN (1 << 12) + +/* Default options set when device is initialized or reset */ +#define XTE_OPTION_DEFAULTS \ + (XTE_OPTION_TXEN | \ + XTE_OPTION_FLOW_CONTROL | \ + XTE_OPTION_RXEN) + +/* XPS_LL_TEMAC SDMA registers definition */ + +#define TX_NXTDESC_PTR 0x00 /* r */ +#define TX_CURBUF_ADDR 0x01 /* r */ +#define TX_CURBUF_LENGTH 0x02 /* r */ +#define TX_CURDESC_PTR 0x03 /* rw */ +#define TX_TAILDESC_PTR 0x04 /* rw */ +#define TX_CHNL_CTRL 0x05 /* rw */ +/* + 0:7 24:31 IRQTimeout + 8:15 16:23 IRQCount + 16:20 11:15 Reserved + 21 10 0 + 22 9 UseIntOnEnd + 23 8 LdIRQCnt + 24 7 IRQEn + 25:28 3:6 Reserved + 29 2 IrqErrEn + 30 1 IrqDlyEn + 31 0 IrqCoalEn +*/ +#define CHNL_CTRL_IRQ_IOE (1 << 9) +#define CHNL_CTRL_IRQ_EN (1 << 7) +#define CHNL_CTRL_IRQ_ERR_EN (1 << 2) +#define CHNL_CTRL_IRQ_DLY_EN (1 << 1) +#define CHNL_CTRL_IRQ_COAL_EN (1 << 0) +#define TX_IRQ_REG 0x06 /* rw */ +/* + 0:7 24:31 DltTmrValue + 8:15 16:23 ClscCntrValue + 16:17 14:15 Reserved + 18:21 10:13 ClscCnt + 22:23 8:9 DlyCnt + 24:28 3::7 Reserved + 29 2 ErrIrq + 30 1 DlyIrq + 31 0 CoalIrq + */ +#define TX_CHNL_STS 0x07 /* r */ +/* + 0:9 22:31 Reserved + 10 21 TailPErr + 11 20 CmpErr + 12 19 AddrErr + 13 18 NxtPErr + 14 17 CurPErr + 15 16 BsyWr + 16:23 8:15 Reserved + 24 7 Error + 25 6 IOE + 26 5 SOE + 27 4 Cmplt + 28 3 SOP + 29 2 EOP + 30 1 EngBusy + 31 0 Reserved +*/ + +#define RX_NXTDESC_PTR 0x08 /* r */ +#define RX_CURBUF_ADDR 0x09 /* r */ +#define RX_CURBUF_LENGTH 0x0a /* r */ +#define RX_CURDESC_PTR 0x0b /* rw */ +#define RX_TAILDESC_PTR 0x0c /* rw */ +#define RX_CHNL_CTRL 0x0d /* rw */ +/* + 0:7 24:31 IRQTimeout + 8:15 16:23 IRQCount + 16:20 11:15 Reserved + 21 10 0 + 22 9 UseIntOnEnd + 23 8 LdIRQCnt + 24 7 IRQEn + 25:28 3:6 Reserved + 29 2 IrqErrEn + 30 1 IrqDlyEn + 31 0 IrqCoalEn + */ +#define RX_IRQ_REG 0x0e /* rw */ +#define IRQ_COAL (1 << 0) +#define IRQ_DLY (1 << 1) +#define IRQ_ERR (1 << 2) +#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ +/* + 0:7 24:31 DltTmrValue + 8:15 16:23 ClscCntrValue + 16:17 14:15 Reserved + 18:21 10:13 ClscCnt + 22:23 8:9 DlyCnt + 24:28 3::7 Reserved +*/ +#define RX_CHNL_STS 0x0f /* r */ +#define CHNL_STS_ENGBUSY (1 << 1) +#define CHNL_STS_EOP (1 << 2) +#define CHNL_STS_SOP (1 << 3) +#define CHNL_STS_CMPLT (1 << 4) +#define CHNL_STS_SOE (1 << 5) +#define CHNL_STS_IOE (1 << 6) +#define CHNL_STS_ERR (1 << 7) + +#define CHNL_STS_BSYWR (1 << 16) +#define CHNL_STS_CURPERR (1 << 17) +#define CHNL_STS_NXTPERR (1 << 18) +#define CHNL_STS_ADDRERR (1 << 19) +#define CHNL_STS_CMPERR (1 << 20) +#define CHNL_STS_TAILERR (1 << 21) +/* + 0:9 22:31 Reserved + 10 21 TailPErr + 11 20 CmpErr + 12 19 AddrErr + 13 18 NxtPErr + 14 17 CurPErr + 15 16 BsyWr + 16:23 8:15 Reserved + 24 7 Error + 25 6 IOE + 26 5 SOE + 27 4 Cmplt + 28 3 SOP + 29 2 EOP + 30 1 EngBusy + 31 0 Reserved +*/ + +#define DMA_CONTROL_REG 0x10 /* rw */ +#define DMA_CONTROL_RST (1 << 0) +#define DMA_TAIL_ENABLE (1 << 2) + +/* XPS_LL_TEMAC direct registers definition */ + +#define XTE_RAF0_OFFSET 0x00 +#define RAF0_RST (1 << 0) +#define RAF0_MCSTREJ (1 << 1) +#define RAF0_BCSTREJ (1 << 2) +#define XTE_TPF0_OFFSET 0x04 +#define XTE_IFGP0_OFFSET 0x08 +#define XTE_ISR0_OFFSET 0x0c +#define ISR0_HARDACSCMPLT (1 << 0) +#define ISR0_AUTONEG (1 << 1) +#define ISR0_RXCMPLT (1 << 2) +#define ISR0_RXREJ (1 << 3) +#define ISR0_RXFIFOOVR (1 << 4) +#define ISR0_TXCMPLT (1 << 5) +#define ISR0_RXDCMLCK (1 << 6) + +#define XTE_IPR0_OFFSET 0x10 +#define XTE_IER0_OFFSET 0x14 + +#define XTE_MSW0_OFFSET 0x20 +#define XTE_LSW0_OFFSET 0x24 +#define XTE_CTL0_OFFSET 0x28 +#define XTE_RDY0_OFFSET 0x2c + +#define XTE_RSE_MIIM_RR_MASK 0x0002 +#define XTE_RSE_MIIM_WR_MASK 0x0004 +#define XTE_RSE_CFG_RR_MASK 0x0020 +#define XTE_RSE_CFG_WR_MASK 0x0040 +#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000) + +/* XPS_LL_TEMAC indirect registers offset definition */ + +#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */ +#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */ +#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */ +#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */ +#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */ +#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */ +#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */ +#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */ +#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */ + +#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */ +#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */ +#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */ +#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */ +#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */ +#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */ +#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */ + +#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */ +#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */ +#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */ + +#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */ +#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */ +#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */ +#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */ +#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */ +#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */ + +#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */ +#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */ +#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */ +#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */ + +#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */ +#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */ +#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */ +#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */ + +/* Interrupt Request status */ +#define XTE_TIS_OFFSET 0x000003A0 +#define TIS_FRIS (1 << 0) +#define TIS_MRIS (1 << 1) +#define TIS_MWIS (1 << 2) +#define TIS_ARIS (1 << 3) +#define TIS_AWIS (1 << 4) +#define TIS_CRIS (1 << 5) +#define TIS_CWIS (1 << 6) + +#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ + +/** MII Mamagement Control register (MGTCR) */ +#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ +#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ + +#define CNTLREG_WRITE_ENABLE_MASK 0x8000 +#define CNTLREG_EMAC1SEL_MASK 0x0400 +#define CNTLREG_ADDRESSCODE_MASK 0x03ff + +/* CDMAC descriptor status bit definitions */ + +#define STS_CTRL_APP0_ERR (1 << 31) +#define STS_CTRL_APP0_IRQONEND (1 << 30) +/* undoccumented */ +#define STS_CTRL_APP0_STOPONEND (1 << 29) +#define STS_CTRL_APP0_CMPLT (1 << 28) +#define STS_CTRL_APP0_SOP (1 << 27) +#define STS_CTRL_APP0_EOP (1 << 26) +#define STS_CTRL_APP0_ENGBUSY (1 << 25) +/* undocumented */ +#define STS_CTRL_APP0_ENGRST (1 << 24) + +#define TX_CONTROL_CALC_CSUM_MASK 1 + +#define MULTICAST_CAM_TABLE_NUM 4 + +/* TEMAC Synthesis features */ +#define TEMAC_FEATURE_RX_CSUM (1 << 0) +#define TEMAC_FEATURE_TX_CSUM (1 << 1) + +/* TX/RX CURDESC_PTR points to first descriptor */ +/* TX/RX TAILDESC_PTR points to last descriptor in linked list */ + +/** + * struct cdmac_bd - LocalLink buffer descriptor format + * + * app0 bits: + * 0 Error + * 1 IrqOnEnd generate an interrupt at completion of DMA op + * 2 reserved + * 3 completed Current descriptor completed + * 4 SOP TX - marks first desc/ RX marks first desct + * 5 EOP TX marks last desc/RX marks last desc + * 6 EngBusy DMA is processing + * 7 reserved + * 8:31 application specific + */ +struct cdmac_bd { + u32 next; /* Physical address of next buffer descriptor */ + u32 phys; + u32 len; + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum */ + u32 app3; + u32 app4; /* skb for TX length for RX */ +}; + +struct temac_local { + struct net_device *ndev; + struct device *dev; + + /* Connection to PHY device */ + struct phy_device *phy_dev; /* Pointer to PHY device */ + struct device_node *phy_node; + + /* MDIO bus data */ + struct mii_bus *mii_bus; /* MII bus reference */ + int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + + /* IO registers, dma functions and IRQs */ + void __iomem *regs; + void __iomem *sdma_regs; +#ifdef CONFIG_PPC_DCR + dcr_host_t sdma_dcrs; +#endif + u32 (*dma_in)(struct temac_local *, int); + void (*dma_out)(struct temac_local *, int, u32); + + int tx_irq; + int rx_irq; + int emac_num; + + struct sk_buff **rx_skb; + spinlock_t rx_lock; + struct mutex indirect_mutex; + u32 options; /* Current options word */ + int last_link; + unsigned int temac_features; + + /* Buffer descriptors */ + struct cdmac_bd *tx_bd_v; + dma_addr_t tx_bd_p; + struct cdmac_bd *rx_bd_v; + dma_addr_t rx_bd_p; + int tx_bd_ci; + int tx_bd_next; + int tx_bd_tail; + int rx_bd_ci; +}; + +/* xilinx_temac.c */ +u32 temac_ior(struct temac_local *lp, int offset); +void temac_iow(struct temac_local *lp, int offset, u32 value); +int temac_indirect_busywait(struct temac_local *lp); +u32 temac_indirect_in32(struct temac_local *lp, int reg); +void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); + + +/* xilinx_temac_mdio.c */ +int temac_mdio_setup(struct temac_local *lp, struct device_node *np); +void temac_mdio_teardown(struct temac_local *lp); + +#endif /* XILINX_LL_TEMAC_H */ diff --git a/kernel/drivers/net/ethernet/xilinx/ll_temac_main.c b/kernel/drivers/net/ethernet/xilinx/ll_temac_main.c new file mode 100644 index 000000000..af2694dc6 --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -0,0 +1,1182 @@ +/* + * Driver for Xilinx TEMAC Ethernet device + * + * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi + * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. + * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. + * + * This is a driver for the Xilinx ll_temac ipcore which is often used + * in the Virtex and Spartan series of chips. + * + * Notes: + * - The ll_temac hardware uses indirect access for many of the TEMAC + * registers, include the MDIO bus. However, indirect access to MDIO + * registers take considerably more clock cycles than to TEMAC registers. + * MDIO accesses are long, so threads doing them should probably sleep + * rather than busywait. However, since only one indirect access can be + * in progress at any given time, that means that *all* indirect accesses + * could end up sleeping (to wait for an MDIO access to complete). + * Fortunately none of the indirect accesses are on the 'hot' path for tx + * or rx, so this should be okay. + * + * TODO: + * - Factor out locallink DMA code into separate driver + * - Fix multicast assignment. + * - Fix support for hardware checksumming. + * - Testing. Lots and lots of testing. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* needed for sizeof(tcphdr) */ +#include /* needed for sizeof(udphdr) */ +#include +#include +#include +#include +#include +#include +#include + +#include "ll_temac.h" + +#define TX_BD_NUM 64 +#define RX_BD_NUM 128 + +/* --------------------------------------------------------------------- + * Low level register access functions + */ + +u32 temac_ior(struct temac_local *lp, int offset) +{ + return in_be32((u32 *)(lp->regs + offset)); +} + +void temac_iow(struct temac_local *lp, int offset, u32 value) +{ + out_be32((u32 *) (lp->regs + offset), value); +} + +int temac_indirect_busywait(struct temac_local *lp) +{ + unsigned long end = jiffies + 2; + + while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) { + if (time_before_eq(end, jiffies)) { + WARN_ON(1); + return -ETIMEDOUT; + } + msleep(1); + } + return 0; +} + +/** + * temac_indirect_in32 + * + * lp->indirect_mutex must be held when calling this function + */ +u32 temac_indirect_in32(struct temac_local *lp, int reg) +{ + u32 val; + + if (temac_indirect_busywait(lp)) + return -ETIMEDOUT; + temac_iow(lp, XTE_CTL0_OFFSET, reg); + if (temac_indirect_busywait(lp)) + return -ETIMEDOUT; + val = temac_ior(lp, XTE_LSW0_OFFSET); + + return val; +} + +/** + * temac_indirect_out32 + * + * lp->indirect_mutex must be held when calling this function + */ +void temac_indirect_out32(struct temac_local *lp, int reg, u32 value) +{ + if (temac_indirect_busywait(lp)) + return; + temac_iow(lp, XTE_LSW0_OFFSET, value); + temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg); + temac_indirect_busywait(lp); +} + +/** + * temac_dma_in32 - Memory mapped DMA read, this function expects a + * register input that is based on DCR word addresses which + * are then converted to memory mapped byte addresses + */ +static u32 temac_dma_in32(struct temac_local *lp, int reg) +{ + return in_be32((u32 *)(lp->sdma_regs + (reg << 2))); +} + +/** + * temac_dma_out32 - Memory mapped DMA read, this function expects a + * register input that is based on DCR word addresses which + * are then converted to memory mapped byte addresses + */ +static void temac_dma_out32(struct temac_local *lp, int reg, u32 value) +{ + out_be32((u32 *)(lp->sdma_regs + (reg << 2)), value); +} + +/* DMA register access functions can be DCR based or memory mapped. + * The PowerPC 440 is DCR based, the PowerPC 405 and MicroBlaze are both + * memory mapped. + */ +#ifdef CONFIG_PPC_DCR + +/** + * temac_dma_dcr_in32 - DCR based DMA read + */ +static u32 temac_dma_dcr_in(struct temac_local *lp, int reg) +{ + return dcr_read(lp->sdma_dcrs, reg); +} + +/** + * temac_dma_dcr_out32 - DCR based DMA write + */ +static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value) +{ + dcr_write(lp->sdma_dcrs, reg, value); +} + +/** + * temac_dcr_setup - If the DMA is DCR based, then setup the address and + * I/O functions + */ +static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op, + struct device_node *np) +{ + unsigned int dcrs; + + /* setup the dcr address mapping if it's in the device tree */ + + dcrs = dcr_resource_start(np, 0); + if (dcrs != 0) { + lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0)); + lp->dma_in = temac_dma_dcr_in; + lp->dma_out = temac_dma_dcr_out; + dev_dbg(&op->dev, "DCR base: %x\n", dcrs); + return 0; + } + /* no DCR in the device tree, indicate a failure */ + return -1; +} + +#else + +/* + * temac_dcr_setup - This is a stub for when DCR is not supported, + * such as with MicroBlaze + */ +static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op, + struct device_node *np) +{ + return -1; +} + +#endif + +/** + * temac_dma_bd_release - Release buffer descriptor rings + */ +static void temac_dma_bd_release(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + int i; + + /* Reset Local Link (DMA) */ + lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST); + + for (i = 0; i < RX_BD_NUM; i++) { + if (!lp->rx_skb[i]) + break; + else { + dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys, + XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE); + dev_kfree_skb(lp->rx_skb[i]); + } + } + if (lp->rx_bd_v) + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + lp->rx_bd_v, lp->rx_bd_p); + if (lp->tx_bd_v) + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + lp->tx_bd_v, lp->tx_bd_p); + kfree(lp->rx_skb); +} + +/** + * temac_dma_bd_init - Setup buffer descriptor rings + */ +static int temac_dma_bd_init(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct sk_buff *skb; + int i; + + lp->rx_skb = kcalloc(RX_BD_NUM, sizeof(*lp->rx_skb), GFP_KERNEL); + if (!lp->rx_skb) + goto out; + + /* allocate the tx and rx ring buffer descriptors. */ + /* returns a virtual address and a physical address. */ + lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, GFP_KERNEL); + if (!lp->tx_bd_v) + goto out; + + lp->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, GFP_KERNEL); + if (!lp->rx_bd_v) + goto out; + + for (i = 0; i < TX_BD_NUM; i++) { + lp->tx_bd_v[i].next = lp->tx_bd_p + + sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM); + } + + for (i = 0; i < RX_BD_NUM; i++) { + lp->rx_bd_v[i].next = lp->rx_bd_p + + sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM); + + skb = netdev_alloc_skb_ip_align(ndev, + XTE_MAX_JUMBO_FRAME_SIZE); + if (!skb) + goto out; + + lp->rx_skb[i] = skb; + /* returns physical address of skb->data */ + lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, + skb->data, + XTE_MAX_JUMBO_FRAME_SIZE, + DMA_FROM_DEVICE); + lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE; + lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND; + } + + lp->dma_out(lp, TX_CHNL_CTRL, 0x10220400 | + CHNL_CTRL_IRQ_EN | + CHNL_CTRL_IRQ_DLY_EN | + CHNL_CTRL_IRQ_COAL_EN); + /* 0x10220483 */ + /* 0x00100483 */ + lp->dma_out(lp, RX_CHNL_CTRL, 0xff070000 | + CHNL_CTRL_IRQ_EN | + CHNL_CTRL_IRQ_DLY_EN | + CHNL_CTRL_IRQ_COAL_EN | + CHNL_CTRL_IRQ_IOE); + /* 0xff010283 */ + + lp->dma_out(lp, RX_CURDESC_PTR, lp->rx_bd_p); + lp->dma_out(lp, RX_TAILDESC_PTR, + lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p); + + /* Init descriptor indexes */ + lp->tx_bd_ci = 0; + lp->tx_bd_next = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + + return 0; + +out: + temac_dma_bd_release(ndev); + return -ENOMEM; +} + +/* --------------------------------------------------------------------- + * net_device_ops + */ + +static void temac_do_set_mac_address(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + + /* set up unicast MAC address filter set its mac address */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_UAW0_OFFSET, + (ndev->dev_addr[0]) | + (ndev->dev_addr[1] << 8) | + (ndev->dev_addr[2] << 16) | + (ndev->dev_addr[3] << 24)); + /* There are reserved bits in EUAW1 + * so don't affect them Set MAC bits [47:32] in EUAW1 */ + temac_indirect_out32(lp, XTE_UAW1_OFFSET, + (ndev->dev_addr[4] & 0x000000ff) | + (ndev->dev_addr[5] << 8)); + mutex_unlock(&lp->indirect_mutex); +} + +static int temac_init_mac_address(struct net_device *ndev, void *address) +{ + memcpy(ndev->dev_addr, address, ETH_ALEN); + if (!is_valid_ether_addr(ndev->dev_addr)) + eth_hw_addr_random(ndev); + temac_do_set_mac_address(ndev); + return 0; +} + +static int temac_set_mac_address(struct net_device *ndev, void *p) +{ + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + memcpy(ndev->dev_addr, addr->sa_data, ETH_ALEN); + temac_do_set_mac_address(ndev); + return 0; +} + +static void temac_set_multicast_list(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + u32 multi_addr_msw, multi_addr_lsw, val; + int i; + + mutex_lock(&lp->indirect_mutex); + if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) || + netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) { + /* + * We must make the kernel realise we had to move + * into promisc mode or we start all out war on + * the cable. If it was a promisc request the + * flag is already set. If not we assert it. + */ + ndev->flags |= IFF_PROMISC; + temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK); + dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); + } else if (!netdev_mc_empty(ndev)) { + struct netdev_hw_addr *ha; + + i = 0; + netdev_for_each_mc_addr(ha, ndev) { + if (i >= MULTICAST_CAM_TABLE_NUM) + break; + multi_addr_msw = ((ha->addr[3] << 24) | + (ha->addr[2] << 16) | + (ha->addr[1] << 8) | + (ha->addr[0])); + temac_indirect_out32(lp, XTE_MAW0_OFFSET, + multi_addr_msw); + multi_addr_lsw = ((ha->addr[5] << 8) | + (ha->addr[4]) | (i << 16)); + temac_indirect_out32(lp, XTE_MAW1_OFFSET, + multi_addr_lsw); + i++; + } + } else { + val = temac_indirect_in32(lp, XTE_AFM_OFFSET); + temac_indirect_out32(lp, XTE_AFM_OFFSET, + val & ~XTE_AFM_EPPRM_MASK); + temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0); + temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0); + dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); + } + mutex_unlock(&lp->indirect_mutex); +} + +struct temac_option { + int flg; + u32 opt; + u32 reg; + u32 m_or; + u32 m_and; +} temac_options[] = { + /* Turn on jumbo packet support for both Rx and Tx */ + { + .opt = XTE_OPTION_JUMBO, + .reg = XTE_TXC_OFFSET, + .m_or = XTE_TXC_TXJMBO_MASK, + }, + { + .opt = XTE_OPTION_JUMBO, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXJMBO_MASK, + }, + /* Turn on VLAN packet support for both Rx and Tx */ + { + .opt = XTE_OPTION_VLAN, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXVLAN_MASK, + }, + { + .opt = XTE_OPTION_VLAN, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXVLAN_MASK, + }, + /* Turn on FCS stripping on receive packets */ + { + .opt = XTE_OPTION_FCS_STRIP, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXFCS_MASK, + }, + /* Turn on FCS insertion on transmit packets */ + { + .opt = XTE_OPTION_FCS_INSERT, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXFCS_MASK, + }, + /* Turn on length/type field checking on receive packets */ + { + .opt = XTE_OPTION_LENTYPE_ERR, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXLT_MASK, + }, + /* Turn on flow control */ + { + .opt = XTE_OPTION_FLOW_CONTROL, + .reg = XTE_FCC_OFFSET, + .m_or =XTE_FCC_RXFLO_MASK, + }, + /* Turn on flow control */ + { + .opt = XTE_OPTION_FLOW_CONTROL, + .reg = XTE_FCC_OFFSET, + .m_or =XTE_FCC_TXFLO_MASK, + }, + /* Turn on promiscuous frame filtering (all frames are received ) */ + { + .opt = XTE_OPTION_PROMISC, + .reg = XTE_AFM_OFFSET, + .m_or =XTE_AFM_EPPRM_MASK, + }, + /* Enable transmitter if not already enabled */ + { + .opt = XTE_OPTION_TXEN, + .reg = XTE_TXC_OFFSET, + .m_or =XTE_TXC_TXEN_MASK, + }, + /* Enable receiver? */ + { + .opt = XTE_OPTION_RXEN, + .reg = XTE_RXC1_OFFSET, + .m_or =XTE_RXC1_RXEN_MASK, + }, + {} +}; + +/** + * temac_setoptions + */ +static u32 temac_setoptions(struct net_device *ndev, u32 options) +{ + struct temac_local *lp = netdev_priv(ndev); + struct temac_option *tp = &temac_options[0]; + int reg; + + mutex_lock(&lp->indirect_mutex); + while (tp->opt) { + reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or; + if (options & tp->opt) + reg |= tp->m_or; + temac_indirect_out32(lp, tp->reg, reg); + tp++; + } + lp->options |= options; + mutex_unlock(&lp->indirect_mutex); + + return 0; +} + +/* Initialize temac */ +static void temac_device_reset(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + u32 timeout; + u32 val; + + /* Perform a software reset */ + + /* 0x300 host enable bit ? */ + /* reset PHY through control register ?:1 */ + + dev_dbg(&ndev->dev, "%s()\n", __func__); + + mutex_lock(&lp->indirect_mutex); + /* Reset the receiver and wait for it to finish reset */ + temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK); + timeout = 1000; + while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset RX reset timeout!!\n"); + break; + } + } + + /* Reset the transmitter and wait for it to finish reset */ + temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK); + timeout = 1000; + while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset TX reset timeout!!\n"); + break; + } + } + + /* Disable the receiver */ + val = temac_indirect_in32(lp, XTE_RXC1_OFFSET); + temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK); + + /* Reset Local Link (DMA) */ + lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST); + timeout = 1000; + while (lp->dma_in(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) { + udelay(1); + if (--timeout == 0) { + dev_err(&ndev->dev, + "temac_device_reset DMA reset timeout!!\n"); + break; + } + } + lp->dma_out(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE); + + if (temac_dma_bd_init(ndev)) { + dev_err(&ndev->dev, + "temac_device_reset descriptor allocation failed\n"); + } + + temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0); + temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0); + temac_indirect_out32(lp, XTE_TXC_OFFSET, 0); + temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK); + + mutex_unlock(&lp->indirect_mutex); + + /* Sync default options with HW + * but leave receiver and transmitter disabled. */ + temac_setoptions(ndev, + lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN)); + + temac_do_set_mac_address(ndev); + + /* Set address filter table */ + temac_set_multicast_list(ndev); + if (temac_setoptions(ndev, lp->options)) + dev_err(&ndev->dev, "Error setting TEMAC options\n"); + + /* Init Driver variable */ + ndev->trans_start = jiffies; /* prevent tx timeout */ +} + +void temac_adjust_link(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct phy_device *phy = lp->phy_dev; + u32 mii_speed; + int link_state; + + /* hash together the state values to decide if something has changed */ + link_state = phy->speed | (phy->duplex << 1) | phy->link; + + mutex_lock(&lp->indirect_mutex); + if (lp->last_link != link_state) { + mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET); + mii_speed &= ~XTE_EMCFG_LINKSPD_MASK; + + switch (phy->speed) { + case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break; + case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break; + case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break; + } + + /* Write new speed setting out to TEMAC */ + temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed); + lp->last_link = link_state; + phy_print_status(phy); + } + mutex_unlock(&lp->indirect_mutex); +} + +static void temac_start_xmit_done(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct cdmac_bd *cur_p; + unsigned int stat = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + stat = cur_p->app0; + + while (stat & STS_CTRL_APP0_CMPLT) { + dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len, + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app3 = 0; + cur_p->app4 = 0; + + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += cur_p->len; + + lp->tx_bd_ci++; + if (lp->tx_bd_ci >= TX_BD_NUM) + lp->tx_bd_ci = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + stat = cur_p->app0; + } + + netif_wake_queue(ndev); +} + +static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag) +{ + struct cdmac_bd *cur_p; + int tail; + + tail = lp->tx_bd_tail; + cur_p = &lp->tx_bd_v[tail]; + + do { + if (cur_p->app0) + return NETDEV_TX_BUSY; + + tail++; + if (tail >= TX_BD_NUM) + tail = 0; + + cur_p = &lp->tx_bd_v[tail]; + num_frag--; + } while (num_frag >= 0); + + return 0; +} + +static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct cdmac_bd *cur_p; + dma_addr_t start_p, tail_p; + int ii; + unsigned long num_frag; + skb_frag_t *frag; + + num_frag = skb_shinfo(skb)->nr_frags; + frag = &skb_shinfo(skb)->frags[0]; + start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + + if (temac_check_tx_bd_space(lp, num_frag)) { + if (!netif_queue_stopped(ndev)) { + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; + } + return NETDEV_TX_BUSY; + } + + cur_p->app0 = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + unsigned int csum_start_off = skb_checksum_start_offset(skb); + unsigned int csum_index_off = csum_start_off + skb->csum_offset; + + cur_p->app0 |= 1; /* TX Checksum Enabled */ + cur_p->app1 = (csum_start_off << 16) | csum_index_off; + cur_p->app2 = 0; /* initial checksum seed */ + } + + cur_p->app0 |= STS_CTRL_APP0_SOP; + cur_p->len = skb_headlen(skb); + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + cur_p->app4 = (unsigned long)skb; + + for (ii = 0; ii < num_frag; ii++) { + lp->tx_bd_tail++; + if (lp->tx_bd_tail >= TX_BD_NUM) + lp->tx_bd_tail = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + cur_p->phys = dma_map_single(ndev->dev.parent, + skb_frag_address(frag), + skb_frag_size(frag), DMA_TO_DEVICE); + cur_p->len = skb_frag_size(frag); + cur_p->app0 = 0; + frag++; + } + cur_p->app0 |= STS_CTRL_APP0_EOP; + + tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + lp->tx_bd_tail++; + if (lp->tx_bd_tail >= TX_BD_NUM) + lp->tx_bd_tail = 0; + + skb_tx_timestamp(skb); + + /* Kick off the transfer */ + lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */ + + return NETDEV_TX_OK; +} + + +static void ll_temac_recv(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + struct sk_buff *skb, *new_skb; + unsigned int bdstat; + struct cdmac_bd *cur_p; + dma_addr_t tail_p; + int length; + unsigned long flags; + + spin_lock_irqsave(&lp->rx_lock, flags); + + tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + + bdstat = cur_p->app0; + while ((bdstat & STS_CTRL_APP0_CMPLT)) { + + skb = lp->rx_skb[lp->rx_bd_ci]; + length = cur_p->app4 & 0x3FFF; + + dma_unmap_single(ndev->dev.parent, cur_p->phys, length, + DMA_FROM_DEVICE); + + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, ndev); + skb_checksum_none_assert(skb); + + /* if we're doing rx csum offload, set it up */ + if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) && + (skb->protocol == htons(ETH_P_IP)) && + (skb->len > 64)) { + + skb->csum = cur_p->app3 & 0xFFFF; + skb->ip_summed = CHECKSUM_COMPLETE; + } + + if (!skb_defer_rx_timestamp(skb)) + netif_rx(skb); + + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += length; + + new_skb = netdev_alloc_skb_ip_align(ndev, + XTE_MAX_JUMBO_FRAME_SIZE); + if (!new_skb) { + spin_unlock_irqrestore(&lp->rx_lock, flags); + return; + } + + cur_p->app0 = STS_CTRL_APP0_IRQONEND; + cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, + XTE_MAX_JUMBO_FRAME_SIZE, + DMA_FROM_DEVICE); + cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE; + lp->rx_skb[lp->rx_bd_ci] = new_skb; + + lp->rx_bd_ci++; + if (lp->rx_bd_ci >= RX_BD_NUM) + lp->rx_bd_ci = 0; + + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + bdstat = cur_p->app0; + } + lp->dma_out(lp, RX_TAILDESC_PTR, tail_p); + + spin_unlock_irqrestore(&lp->rx_lock, flags); +} + +static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev) +{ + struct net_device *ndev = _ndev; + struct temac_local *lp = netdev_priv(ndev); + unsigned int status; + + status = lp->dma_in(lp, TX_IRQ_REG); + lp->dma_out(lp, TX_IRQ_REG, status); + + if (status & (IRQ_COAL | IRQ_DLY)) + temac_start_xmit_done(lp->ndev); + if (status & 0x080) + dev_err(&ndev->dev, "DMA error 0x%x\n", status); + + return IRQ_HANDLED; +} + +static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev) +{ + struct net_device *ndev = _ndev; + struct temac_local *lp = netdev_priv(ndev); + unsigned int status; + + /* Read and clear the status registers */ + status = lp->dma_in(lp, RX_IRQ_REG); + lp->dma_out(lp, RX_IRQ_REG, status); + + if (status & (IRQ_COAL | IRQ_DLY)) + ll_temac_recv(lp->ndev); + + return IRQ_HANDLED; +} + +static int temac_open(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + int rc; + + dev_dbg(&ndev->dev, "temac_open()\n"); + + if (lp->phy_node) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + temac_adjust_link, 0, 0); + if (!lp->phy_dev) { + dev_err(lp->dev, "of_phy_connect() failed\n"); + return -ENODEV; + } + + phy_start(lp->phy_dev); + } + + temac_device_reset(ndev); + + rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev); + if (rc) + goto err_tx_irq; + rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev); + if (rc) + goto err_rx_irq; + + return 0; + + err_rx_irq: + free_irq(lp->tx_irq, ndev); + err_tx_irq: + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + dev_err(lp->dev, "request_irq() failed\n"); + return rc; +} + +static int temac_stop(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "temac_close()\n"); + + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + temac_dma_bd_release(ndev); + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +temac_poll_controller(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + + disable_irq(lp->tx_irq); + disable_irq(lp->rx_irq); + + ll_temac_rx_irq(lp->tx_irq, ndev); + ll_temac_tx_irq(lp->rx_irq, ndev); + + enable_irq(lp->tx_irq); + enable_irq(lp->rx_irq); +} +#endif + +static int temac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) +{ + struct temac_local *lp = netdev_priv(ndev); + + if (!netif_running(ndev)) + return -EINVAL; + + if (!lp->phy_dev) + return -EINVAL; + + return phy_mii_ioctl(lp->phy_dev, rq, cmd); +} + +static const struct net_device_ops temac_netdev_ops = { + .ndo_open = temac_open, + .ndo_stop = temac_stop, + .ndo_start_xmit = temac_start_xmit, + .ndo_set_mac_address = temac_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = temac_ioctl, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = temac_poll_controller, +#endif +}; + +/* --------------------------------------------------------------------- + * SYSFS device attributes + */ +static ssize_t temac_show_llink_regs(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct temac_local *lp = netdev_priv(ndev); + int i, len = 0; + + for (i = 0; i < 0x11; i++) + len += sprintf(buf + len, "%.8x%s", lp->dma_in(lp, i), + (i % 8) == 7 ? "\n" : " "); + len += sprintf(buf + len, "\n"); + + return len; +} + +static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL); + +static struct attribute *temac_device_attrs[] = { + &dev_attr_llink_regs.attr, + NULL, +}; + +static const struct attribute_group temac_attr_group = { + .attrs = temac_device_attrs, +}; + +/* ethtool support */ +static int temac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +{ + struct temac_local *lp = netdev_priv(ndev); + return phy_ethtool_gset(lp->phy_dev, cmd); +} + +static int temac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +{ + struct temac_local *lp = netdev_priv(ndev); + return phy_ethtool_sset(lp->phy_dev, cmd); +} + +static int temac_nway_reset(struct net_device *ndev) +{ + struct temac_local *lp = netdev_priv(ndev); + return phy_start_aneg(lp->phy_dev); +} + +static const struct ethtool_ops temac_ethtool_ops = { + .get_settings = temac_get_settings, + .set_settings = temac_set_settings, + .nway_reset = temac_nway_reset, + .get_link = ethtool_op_get_link, + .get_ts_info = ethtool_op_get_ts_info, +}; + +static int temac_of_probe(struct platform_device *op) +{ + struct device_node *np; + struct temac_local *lp; + struct net_device *ndev; + const void *addr; + __be32 *p; + int size, rc = 0; + + /* Init network device structure */ + ndev = alloc_etherdev(sizeof(*lp)); + if (!ndev) + return -ENOMEM; + + platform_set_drvdata(op, ndev); + SET_NETDEV_DEV(ndev, &op->dev); + ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ + ndev->features = NETIF_F_SG; + ndev->netdev_ops = &temac_netdev_ops; + ndev->ethtool_ops = &temac_ethtool_ops; +#if 0 + ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */ + ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */ + ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */ + ndev->features |= NETIF_F_HW_VLAN_CTAG_TX; /* Transmit VLAN hw accel */ + ndev->features |= NETIF_F_HW_VLAN_CTAG_RX; /* Receive VLAN hw acceleration */ + ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; /* Receive VLAN filtering */ + ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */ + ndev->features |= NETIF_F_GSO; /* Enable software GSO. */ + ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */ + ndev->features |= NETIF_F_LRO; /* large receive offload */ +#endif + + /* setup temac private info structure */ + lp = netdev_priv(ndev); + lp->ndev = ndev; + lp->dev = &op->dev; + lp->options = XTE_OPTION_DEFAULTS; + spin_lock_init(&lp->rx_lock); + mutex_init(&lp->indirect_mutex); + + /* map device registers */ + lp->regs = of_iomap(op->dev.of_node, 0); + if (!lp->regs) { + dev_err(&op->dev, "could not map temac regs.\n"); + rc = -ENOMEM; + goto nodev; + } + + /* Setup checksum offload, but default to off if not specified */ + lp->temac_features = 0; + p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL); + if (p && be32_to_cpu(*p)) { + lp->temac_features |= TEMAC_FEATURE_TX_CSUM; + /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_IP_CSUM; + } + p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL); + if (p && be32_to_cpu(*p)) + lp->temac_features |= TEMAC_FEATURE_RX_CSUM; + + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(op->dev.of_node, "llink-connected", 0); + if (!np) { + dev_err(&op->dev, "could not find DMA node\n"); + rc = -ENODEV; + goto err_iounmap; + } + + /* Setup the DMA register accesses, could be DCR or memory mapped */ + if (temac_dcr_setup(lp, op, np)) { + + /* no DCR in the device tree, try non-DCR */ + lp->sdma_regs = of_iomap(np, 0); + if (lp->sdma_regs) { + lp->dma_in = temac_dma_in32; + lp->dma_out = temac_dma_out32; + dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs); + } else { + dev_err(&op->dev, "unable to map DMA registers\n"); + of_node_put(np); + goto err_iounmap; + } + } + + lp->rx_irq = irq_of_parse_and_map(np, 0); + lp->tx_irq = irq_of_parse_and_map(np, 1); + + of_node_put(np); /* Finished with the DMA node; drop the reference */ + + if (!lp->rx_irq || !lp->tx_irq) { + dev_err(&op->dev, "could not determine irqs\n"); + rc = -ENOMEM; + goto err_iounmap_2; + } + + + /* Retrieve the MAC address */ + addr = of_get_property(op->dev.of_node, "local-mac-address", &size); + if ((!addr) || (size != 6)) { + dev_err(&op->dev, "could not find MAC address\n"); + rc = -ENODEV; + goto err_iounmap_2; + } + temac_init_mac_address(ndev, (void *)addr); + + rc = temac_mdio_setup(lp, op->dev.of_node); + if (rc) + dev_warn(&op->dev, "error registering MDIO bus\n"); + + lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); + if (lp->phy_node) + dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np); + + /* Add the device attributes */ + rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group); + if (rc) { + dev_err(lp->dev, "Error creating sysfs files\n"); + goto err_iounmap_2; + } + + rc = register_netdev(lp->ndev); + if (rc) { + dev_err(lp->dev, "register_netdev() error (%i)\n", rc); + goto err_register_ndev; + } + + return 0; + + err_register_ndev: + sysfs_remove_group(&lp->dev->kobj, &temac_attr_group); + err_iounmap_2: + if (lp->sdma_regs) + iounmap(lp->sdma_regs); + err_iounmap: + iounmap(lp->regs); + nodev: + free_netdev(ndev); + ndev = NULL; + return rc; +} + +static int temac_of_remove(struct platform_device *op) +{ + struct net_device *ndev = platform_get_drvdata(op); + struct temac_local *lp = netdev_priv(ndev); + + temac_mdio_teardown(lp); + unregister_netdev(ndev); + sysfs_remove_group(&lp->dev->kobj, &temac_attr_group); + of_node_put(lp->phy_node); + lp->phy_node = NULL; + iounmap(lp->regs); + if (lp->sdma_regs) + iounmap(lp->sdma_regs); + free_netdev(ndev); + return 0; +} + +static const struct of_device_id temac_of_match[] = { + { .compatible = "xlnx,xps-ll-temac-1.01.b", }, + { .compatible = "xlnx,xps-ll-temac-2.00.a", }, + { .compatible = "xlnx,xps-ll-temac-2.02.a", }, + { .compatible = "xlnx,xps-ll-temac-2.03.a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, temac_of_match); + +static struct platform_driver temac_of_driver = { + .probe = temac_of_probe, + .remove = temac_of_remove, + .driver = { + .name = "xilinx_temac", + .of_match_table = temac_of_match, + }, +}; + +module_platform_driver(temac_of_driver); + +MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver"); +MODULE_AUTHOR("Yoshio Kashiwagi"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/net/ethernet/xilinx/ll_temac_mdio.c b/kernel/drivers/net/ethernet/xilinx/ll_temac_mdio.c new file mode 100644 index 000000000..8cf9d4f56 --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/ll_temac_mdio.c @@ -0,0 +1,122 @@ +/* + * MDIO bus driver for the Xilinx TEMAC device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ll_temac.h" + +/* --------------------------------------------------------------------- + * MDIO Bus functions + */ +static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct temac_local *lp = bus->priv; + u32 rc; + + /* Write the PHY address to the MIIM Access Initiator register. + * When the transfer completes, the PHY register value will appear + * in the LSW0 register */ + mutex_lock(&lp->indirect_mutex); + temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg); + rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET); + mutex_unlock(&lp->indirect_mutex); + + dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) +{ + struct temac_local *lp = bus->priv; + + dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + /* First write the desired value into the write data register + * and then write the address into the access initiator register + */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val); + temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg); + mutex_unlock(&lp->indirect_mutex); + + return 0; +} + +int temac_mdio_setup(struct temac_local *lp, struct device_node *np) +{ + struct mii_bus *bus; + const u32 *bus_hz; + int clk_div; + int rc, size; + struct resource res; + + /* Calculate a reasonable divisor for the clock rate */ + clk_div = 0x3f; /* worst-case default setting */ + bus_hz = of_get_property(np, "clock-frequency", &size); + if (bus_hz && size >= sizeof(*bus_hz)) { + clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1; + if (clk_div < 1) + clk_div = 1; + if (clk_div > 0x3f) + clk_div = 0x3f; + } + + /* Enable the MDIO bus by asserting the enable bit and writing + * in the clock config */ + mutex_lock(&lp->indirect_mutex); + temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div); + mutex_unlock(&lp->indirect_mutex); + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + of_address_to_resource(np, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long)res.start); + bus->priv = lp; + bus->name = "Xilinx TEMAC MDIO"; + bus->read = temac_mdio_read; + bus->write = temac_mdio_write; + bus->parent = lp->dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + + lp->mii_bus = bus; + + rc = of_mdiobus_register(bus, np); + if (rc) + goto err_register; + + mutex_lock(&lp->indirect_mutex); + dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n", + temac_indirect_in32(lp, XTE_MC_OFFSET)); + mutex_unlock(&lp->indirect_mutex); + return 0; + + err_register: + mdiobus_free(bus); + return rc; +} + +void temac_mdio_teardown(struct temac_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +} + diff --git a/kernel/drivers/net/ethernet/xilinx/xilinx_axienet.h b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet.h new file mode 100644 index 000000000..4c9b4fa1d --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -0,0 +1,504 @@ +/* + * Definitions for Xilinx Axi Ethernet device driver. + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. + */ + +#ifndef XILINX_AXIENET_H +#define XILINX_AXIENET_H + +#include +#include +#include + +/* Packet size info */ +#define XAE_HDR_SIZE 14 /* Size of Ethernet header */ +#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */ +#define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ +#define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ +#define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ + +#define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) + +/* Configuration options */ + +/* Accept all incoming packets. Default: disabled (cleared) */ +#define XAE_OPTION_PROMISC (1 << 0) + +/* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ +#define XAE_OPTION_JUMBO (1 << 1) + +/* VLAN Rx & Tx frame support. Default: disabled (cleared) */ +#define XAE_OPTION_VLAN (1 << 2) + +/* Enable recognition of flow control frames on Rx. Default: enabled (set) */ +#define XAE_OPTION_FLOW_CONTROL (1 << 4) + +/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not + * stripped. Default: disabled (set) */ +#define XAE_OPTION_FCS_STRIP (1 << 5) + +/* Generate FCS field and add PAD automatically for outgoing frames. + * Default: enabled (set) */ +#define XAE_OPTION_FCS_INSERT (1 << 6) + +/* Enable Length/Type error checking for incoming frames. When this option is + * set, the MAC will filter frames that have a mismatched type/length field + * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these + * types of frames are encountered. When this option is cleared, the MAC will + * allow these types of frames to be received. Default: enabled (set) */ +#define XAE_OPTION_LENTYPE_ERR (1 << 7) + +/* Enable the transmitter. Default: enabled (set) */ +#define XAE_OPTION_TXEN (1 << 11) + +/* Enable the receiver. Default: enabled (set) */ +#define XAE_OPTION_RXEN (1 << 12) + +/* Default options set when device is initialized or reset */ +#define XAE_OPTION_DEFAULTS \ + (XAE_OPTION_TXEN | \ + XAE_OPTION_FLOW_CONTROL | \ + XAE_OPTION_RXEN) + +/* Axi DMA Register definitions */ + +#define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */ +#define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */ +#define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */ +#define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */ + +#define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */ +#define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */ +#define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */ +#define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */ + +#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ +#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ + +#define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ +#define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ +#define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ +#define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */ +#define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */ +#define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */ +#define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */ +#define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */ +#define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */ +#define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */ +#define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */ +#define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */ + +#define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */ +#define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */ +#define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */ + +#define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ +#define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ + +#define XAXIDMA_DELAY_SHIFT 24 +#define XAXIDMA_COALESCE_SHIFT 16 + +#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ +#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ +#define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ +#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ + +/* Default TX/RX Threshold and waitbound values for SGDMA mode */ +#define XAXIDMA_DFT_TX_THRESHOLD 24 +#define XAXIDMA_DFT_TX_WAITBOUND 254 +#define XAXIDMA_DFT_RX_THRESHOLD 24 +#define XAXIDMA_DFT_RX_WAITBOUND 254 + +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ +#define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ +#define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ +#define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ +#define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ +#define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ +#define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ +#define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ +#define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ + +#define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40 + +/* Axi Ethernet registers definition */ +#define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */ +#define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */ +#define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/ +#define XAE_IS_OFFSET 0x0000000C /* Interrupt status */ +#define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */ +#define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */ +#define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */ +#define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */ +#define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */ +#define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */ +#define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ +#define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ +#define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ +#define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ +#define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ +#define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ +#define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ +#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ +#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ +#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ +#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ +#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ +#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ +#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ +#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending + * register offset */ +#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable + * register offset */ +#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear + * register offset. */ +#define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ +#define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ +#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ +#define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ +#define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ + +#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ +#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ +#define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ + +/* Bit Masks for Axi Ethernet RAF register */ +#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast + * destination address */ +#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast + * destination address */ +#define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ +#define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ +#define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ +#define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ +#define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ +#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast + * Filtering mode + */ +#define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ +#define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ +#define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ +#define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */ +#define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/ +#define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/ + +/* Bit Masks for Axi Ethernet TPF and IFGP registers */ +#define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ +#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame + * gap adjustment value */ + +/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply + * for all 3 registers. */ +#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access + * complete */ +#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation + * complete */ +#define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ +#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ +#define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ +#define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */ +#define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */ +#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ +#define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ +#define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ + +#define XAE_INT_RECV_ERROR_MASK \ + (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that + * indicate receive + * errors */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ +#define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 1 register */ +#define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet RCW1 register */ +#define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ +#define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not stripped) */ +#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ +#define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check + * disable */ +#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check + * disable */ +#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address + * bits [47:32]. Bits [31:0] are + * stored in register RCW0 */ + +/* Bit masks for Axi Ethernet TC register */ +#define XAE_TC_RST_MASK 0x80000000 /* Reset */ +#define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not generated) */ +#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ +#define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment + * enable */ + +/* Bit masks for Axi Ethernet FCC register */ +#define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ +#define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */ + +/* Bit masks for Axi Ethernet EMMC register */ +#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ +#define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */ +#define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */ +#define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */ +#define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */ +#define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */ +#define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */ +#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ +#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ +#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ + +/* Bit masks for Axi Ethernet PHYC register */ +#define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/ +#define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */ +#define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */ +#define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */ +#define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */ +#define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */ +#define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */ +#define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */ +#define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ +#define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ + +/* Bit masks for Axi Ethernet MDIO interface MC register */ +#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ +#define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ + +/* Bit masks for Axi Ethernet MDIO interface MCR register */ +#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ +#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ +#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ +#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ +#define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */ +#define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */ +#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ +#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ +#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ +#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ + +/* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */ +#define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ + +/* Bit masks for Axi Ethernet UAW1 register */ +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits + * [47:32]; Station address + * bits [31:0] are stored in + * register UAW0 */ + +/* Bit masks for Axi Ethernet FMI register */ +#define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ +#define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ + +#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ + +/* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */ +#define XAE_PHY_TYPE_MII 0 +#define XAE_PHY_TYPE_GMII 1 +#define XAE_PHY_TYPE_RGMII_1_3 2 +#define XAE_PHY_TYPE_RGMII_2_0 3 +#define XAE_PHY_TYPE_SGMII 4 +#define XAE_PHY_TYPE_1000BASE_X 5 + +#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the + * hardware multicast table. */ + +/* Axi Ethernet Synthesis features */ +#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) +#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) +#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) +#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) + +#define XAE_NO_CSUM_OFFLOAD 0 + +#define XAE_FULL_CSUM_STATUS_MASK 0x00000038 +#define XAE_IP_UDP_CSUM_VALIDATED 0x00000003 +#define XAE_IP_TCP_CSUM_VALIDATED 0x00000002 + +#define DELAY_OF_ONE_MILLISEC 1000 + +/** + * struct axidma_bd - Axi Dma buffer descriptor layout + * @next: MM2S/S2MM Next Descriptor Pointer + * @reserved1: Reserved and not used + * @phys: MM2S/S2MM Buffer Address + * @reserved2: Reserved and not used + * @reserved3: Reserved and not used + * @reserved4: Reserved and not used + * @cntrl: MM2S/S2MM Control value + * @status: MM2S/S2MM Status value + * @app0: MM2S/S2MM User Application Field 0. + * @app1: MM2S/S2MM User Application Field 1. + * @app2: MM2S/S2MM User Application Field 2. + * @app3: MM2S/S2MM User Application Field 3. + * @app4: MM2S/S2MM User Application Field 4. + * @sw_id_offset: MM2S/S2MM Sw ID + * @reserved5: Reserved and not used + * @reserved6: Reserved and not used + */ +struct axidma_bd { + u32 next; /* Physical address of next buffer descriptor */ + u32 reserved1; + u32 phys; + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 cntrl; + u32 status; + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum seed */ + u32 app3; + u32 app4; + u32 sw_id_offset; + u32 reserved5; + u32 reserved6; +}; + +/** + * struct axienet_local - axienet private per device data + * @ndev: Pointer for net_device to which it will be attached. + * @dev: Pointer to device structure + * @phy_dev: Pointer to PHY device structure attached to the axienet_local + * @phy_node: Pointer to device node structure + * @mii_bus: Pointer to MII bus structure + * @mdio_irqs: IRQs table for MDIO bus required in mii_bus structure + * @regs: Base address for the axienet_local device address space + * @dma_regs: Base address for the axidma device address space + * @dma_err_tasklet: Tasklet structure to process Axi DMA errors + * @tx_irq: Axidma TX IRQ number + * @rx_irq: Axidma RX IRQ number + * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X + * @options: AxiEthernet option word + * @last_link: Phy link state in which the PHY was negotiated earlier + * @features: Stores the extended features supported by the axienet hw + * @tx_bd_v: Virtual address of the TX buffer descriptor ring + * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @rx_bd_v: Virtual address of the RX buffer descriptor ring + * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring + * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while alloc. BDs before a TX starts + * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while processing BDs after the TX + * completed. + * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being + * accessed currently. + * @max_frm_size: Stores the maximum size of the frame that can be that + * Txed/Rxed in the existing hardware. If jumbo option is + * supported, the maximum frame size would be 9k. Else it is + * 1522 bytes (assuming support for basic VLAN) + * @jumbo_support: Stores hardware configuration for jumbo support. If hardware + * can handle jumbo packets, this entry will be 1, else 0. + */ +struct axienet_local { + struct net_device *ndev; + struct device *dev; + + /* Connection to PHY device */ + struct phy_device *phy_dev; /* Pointer to PHY device */ + struct device_node *phy_node; + + /* MDIO bus data */ + struct mii_bus *mii_bus; /* MII bus reference */ + int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + + /* IO registers, dma functions and IRQs */ + void __iomem *regs; + void __iomem *dma_regs; + + struct tasklet_struct dma_err_tasklet; + + int tx_irq; + int rx_irq; + u32 phy_type; + + u32 options; /* Current options word */ + u32 last_link; + u32 features; + + /* Buffer descriptors */ + struct axidma_bd *tx_bd_v; + dma_addr_t tx_bd_p; + struct axidma_bd *rx_bd_v; + dma_addr_t rx_bd_p; + u32 tx_bd_ci; + u32 tx_bd_tail; + u32 rx_bd_ci; + + u32 max_frm_size; + u32 jumbo_support; + + int csum_offload_on_tx_path; + int csum_offload_on_rx_path; + + u32 coalesce_count_rx; + u32 coalesce_count_tx; +}; + +/** + * struct axiethernet_option - Used to set axi ethernet hardware options + * @opt: Option to be set. + * @reg: Register offset to be written for setting the option + * @m_or: Mask to be ORed for setting the option in the register + */ +struct axienet_option { + u32 opt; + u32 reg; + u32 m_or; +}; + +/** + * axienet_ior - Memory mapped Axi Ethernet register read + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * + * returns: The contents of the Axi Ethernet register + * + * This function returns the contents of the corresponding register. + */ +static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) +{ + return in_be32(lp->regs + offset); +} + +/** + * axienet_iow - Memory mapped Axi Ethernet register write + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * @value: Value to be written into the Axi Ethernet register + * + * This function writes the desired value into the corresponding Axi Ethernet + * register. + */ +static inline void axienet_iow(struct axienet_local *lp, off_t offset, + u32 value) +{ + out_be32((lp->regs + offset), value); +} + +/* Function prototypes visible in xilinx_axienet_mdio.c for other files */ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); +int axienet_mdio_wait_until_ready(struct axienet_local *lp); +void axienet_mdio_teardown(struct axienet_local *lp); + +#endif /* XILINX_AXI_ENET_H */ diff --git a/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_main.c new file mode 100644 index 000000000..28b7e7d9c --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -0,0 +1,1654 @@ +/* + * Xilinx Axi Ethernet device driver + * + * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi + * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. + * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. + * + * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 + * and Spartan6. + * + * TODO: + * - Add Axi Fifo support. + * - Factor out Axi DMA code into separate driver. + * - Test and fix basic multicast filtering. + * - Add support for extended multicast filtering. + * - Test basic VLAN support. + * - Add support for extended VLAN support. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "xilinx_axienet.h" + +/* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */ +#define TX_BD_NUM 64 +#define RX_BD_NUM 128 + +/* Must be shorter than length of ethtool_drvinfo.driver field to fit */ +#define DRIVER_NAME "xaxienet" +#define DRIVER_DESCRIPTION "Xilinx Axi Ethernet driver" +#define DRIVER_VERSION "1.00a" + +#define AXIENET_REGS_N 32 + +/* Match table for of_platform binding */ +static const struct of_device_id axienet_of_match[] = { + { .compatible = "xlnx,axi-ethernet-1.00.a", }, + { .compatible = "xlnx,axi-ethernet-1.01.a", }, + { .compatible = "xlnx,axi-ethernet-2.01.a", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, axienet_of_match); + +/* Option table for setting up Axi Ethernet hardware options */ +static struct axienet_option axienet_options[] = { + /* Turn on jumbo packet support for both Rx and Tx */ + { + .opt = XAE_OPTION_JUMBO, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_JUM_MASK, + }, { + .opt = XAE_OPTION_JUMBO, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_JUM_MASK, + }, { /* Turn on VLAN packet support for both Rx and Tx */ + .opt = XAE_OPTION_VLAN, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_VLAN_MASK, + }, { + .opt = XAE_OPTION_VLAN, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_VLAN_MASK, + }, { /* Turn on FCS stripping on receive packets */ + .opt = XAE_OPTION_FCS_STRIP, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_FCS_MASK, + }, { /* Turn on FCS insertion on transmit packets */ + .opt = XAE_OPTION_FCS_INSERT, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_FCS_MASK, + }, { /* Turn off length/type field checking on receive packets */ + .opt = XAE_OPTION_LENTYPE_ERR, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_LT_DIS_MASK, + }, { /* Turn on Rx flow control */ + .opt = XAE_OPTION_FLOW_CONTROL, + .reg = XAE_FCC_OFFSET, + .m_or = XAE_FCC_FCRX_MASK, + }, { /* Turn on Tx flow control */ + .opt = XAE_OPTION_FLOW_CONTROL, + .reg = XAE_FCC_OFFSET, + .m_or = XAE_FCC_FCTX_MASK, + }, { /* Turn on promiscuous frame filtering */ + .opt = XAE_OPTION_PROMISC, + .reg = XAE_FMI_OFFSET, + .m_or = XAE_FMI_PM_MASK, + }, { /* Enable transmitter */ + .opt = XAE_OPTION_TXEN, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_TX_MASK, + }, { /* Enable receiver */ + .opt = XAE_OPTION_RXEN, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_RX_MASK, + }, + {} +}; + +/** + * axienet_dma_in32 - Memory mapped Axi DMA register read + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * + * returns: The contents of the Axi DMA register + * + * This function returns the contents of the corresponding Axi DMA register. + */ +static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg) +{ + return in_be32(lp->dma_regs + reg); +} + +/** + * axienet_dma_out32 - Memory mapped Axi DMA register write. + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * @value: Value to be written into the Axi DMA register + * + * This function writes the desired value into the corresponding Axi DMA + * register. + */ +static inline void axienet_dma_out32(struct axienet_local *lp, + off_t reg, u32 value) +{ + out_be32((lp->dma_regs + reg), value); +} + +/** + * axienet_dma_bd_release - Release buffer descriptor rings + * @ndev: Pointer to the net_device structure + * + * This function is used to release the descriptors allocated in + * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet + * driver stop api is called. + */ +static void axienet_dma_bd_release(struct net_device *ndev) +{ + int i; + struct axienet_local *lp = netdev_priv(ndev); + + for (i = 0; i < RX_BD_NUM; i++) { + dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys, + lp->max_frm_size, DMA_FROM_DEVICE); + dev_kfree_skb((struct sk_buff *) + (lp->rx_bd_v[i].sw_id_offset)); + } + + if (lp->rx_bd_v) { + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + lp->rx_bd_v, + lp->rx_bd_p); + } + if (lp->tx_bd_v) { + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + lp->tx_bd_v, + lp->tx_bd_p); + } +} + +/** + * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA + * @ndev: Pointer to the net_device structure + * + * returns: 0, on success + * -ENOMEM, on failure + * + * This function is called to initialize the Rx and Tx DMA descriptor + * rings. This initializes the descriptors with required default values + * and is called when Axi Ethernet driver reset is called. + */ +static int axienet_dma_bd_init(struct net_device *ndev) +{ + u32 cr; + int i; + struct sk_buff *skb; + struct axienet_local *lp = netdev_priv(ndev); + + /* Reset the indexes which are used for accessing the BDs */ + lp->tx_bd_ci = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + + /* + * Allocate the Tx and Rx buffer descriptors. + */ + lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, GFP_KERNEL); + if (!lp->tx_bd_v) + goto out; + + lp->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, GFP_KERNEL); + if (!lp->rx_bd_v) + goto out; + + for (i = 0; i < TX_BD_NUM; i++) { + lp->tx_bd_v[i].next = lp->tx_bd_p + + sizeof(*lp->tx_bd_v) * + ((i + 1) % TX_BD_NUM); + } + + for (i = 0; i < RX_BD_NUM; i++) { + lp->rx_bd_v[i].next = lp->rx_bd_p + + sizeof(*lp->rx_bd_v) * + ((i + 1) % RX_BD_NUM); + + skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); + if (!skb) + goto out; + + lp->rx_bd_v[i].sw_id_offset = (u32) skb; + lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, + skb->data, + lp->max_frm_size, + DMA_FROM_DEVICE); + lp->rx_bd_v[i].cntrl = lp->max_frm_size; + } + + /* Start updating the Rx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = ((cr & ~XAXIDMA_COALESCE_MASK) | + ((lp->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = ((cr & ~XAXIDMA_DELAY_MASK) | + (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + /* Start updating the Tx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | + ((lp->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = (((cr & ~XAXIDMA_DELAY_MASK)) | + (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + /* Populate the tail pointer and bring the Rx Axi DMA engine out of + * halted state. This will make the Rx side ready for reception.*/ + axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + + /* Write to the RS (Run-stop) bit in the Tx channel control register. + * Tx channel is now ready to run. But only after we write to the + * tail pointer register that the Tx channel will start transmitting */ + axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + + return 0; +out: + axienet_dma_bd_release(ndev); + return -ENOMEM; +} + +/** + * axienet_set_mac_address - Write the MAC address + * @ndev: Pointer to the net_device structure + * @address: 6 byte Address to be written as MAC address + * + * This function is called to initialize the MAC address of the Axi Ethernet + * core. It writes to the UAW0 and UAW1 registers of the core. + */ +static void axienet_set_mac_address(struct net_device *ndev, void *address) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (address) + memcpy(ndev->dev_addr, address, ETH_ALEN); + if (!is_valid_ether_addr(ndev->dev_addr)) + eth_random_addr(ndev->dev_addr); + + /* Set up unicast MAC address filter set its mac address */ + axienet_iow(lp, XAE_UAW0_OFFSET, + (ndev->dev_addr[0]) | + (ndev->dev_addr[1] << 8) | + (ndev->dev_addr[2] << 16) | + (ndev->dev_addr[3] << 24)); + axienet_iow(lp, XAE_UAW1_OFFSET, + (((axienet_ior(lp, XAE_UAW1_OFFSET)) & + ~XAE_UAW1_UNICASTADDR_MASK) | + (ndev->dev_addr[4] | + (ndev->dev_addr[5] << 8)))); +} + +/** + * netdev_set_mac_address - Write the MAC address (from outside the driver) + * @ndev: Pointer to the net_device structure + * @p: 6 byte Address to be written as MAC address + * + * returns: 0 for all conditions. Presently, there is no failure case. + * + * This function is called to initialize the MAC address of the Axi Ethernet + * core. It calls the core specific axienet_set_mac_address. This is the + * function that goes into net_device_ops structure entry ndo_set_mac_address. + */ +static int netdev_set_mac_address(struct net_device *ndev, void *p) +{ + struct sockaddr *addr = p; + axienet_set_mac_address(ndev, addr->sa_data); + return 0; +} + +/** + * axienet_set_multicast_list - Prepare the multicast table + * @ndev: Pointer to the net_device structure + * + * This function is called to initialize the multicast table during + * initialization. The Axi Ethernet basic multicast support has a four-entry + * multicast table which is initialized here. Additionally this function + * goes into the net_device_ops structure entry ndo_set_multicast_list. This + * means whenever the multicast table entries need to be updated this + * function gets called. + */ +static void axienet_set_multicast_list(struct net_device *ndev) +{ + int i; + u32 reg, af0reg, af1reg; + struct axienet_local *lp = netdev_priv(ndev); + + if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) || + netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) { + /* We must make the kernel realize we had to move into + * promiscuous mode. If it was a promiscuous mode request + * the flag is already set. If not we set it. */ + ndev->flags |= IFF_PROMISC; + reg = axienet_ior(lp, XAE_FMI_OFFSET); + reg |= XAE_FMI_PM_MASK; + axienet_iow(lp, XAE_FMI_OFFSET, reg); + dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); + } else if (!netdev_mc_empty(ndev)) { + struct netdev_hw_addr *ha; + + i = 0; + netdev_for_each_mc_addr(ha, ndev) { + if (i >= XAE_MULTICAST_CAM_TABLE_NUM) + break; + + af0reg = (ha->addr[0]); + af0reg |= (ha->addr[1] << 8); + af0reg |= (ha->addr[2] << 16); + af0reg |= (ha->addr[3] << 24); + + af1reg = (ha->addr[4]); + af1reg |= (ha->addr[5] << 8); + + reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; + reg |= i; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + axienet_iow(lp, XAE_AF0_OFFSET, af0reg); + axienet_iow(lp, XAE_AF1_OFFSET, af1reg); + i++; + } + } else { + reg = axienet_ior(lp, XAE_FMI_OFFSET); + reg &= ~XAE_FMI_PM_MASK; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + + for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) { + reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; + reg |= i; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + axienet_iow(lp, XAE_AF0_OFFSET, 0); + axienet_iow(lp, XAE_AF1_OFFSET, 0); + } + + dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); + } +} + +/** + * axienet_setoptions - Set an Axi Ethernet option + * @ndev: Pointer to the net_device structure + * @options: Option to be enabled/disabled + * + * The Axi Ethernet core has multiple features which can be selectively turned + * on or off. The typical options could be jumbo frame option, basic VLAN + * option, promiscuous mode option etc. This function is used to set or clear + * these options in the Axi Ethernet hardware. This is done through + * axienet_option structure . + */ +static void axienet_setoptions(struct net_device *ndev, u32 options) +{ + int reg; + struct axienet_local *lp = netdev_priv(ndev); + struct axienet_option *tp = &axienet_options[0]; + + while (tp->opt) { + reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or)); + if (options & tp->opt) + reg |= tp->m_or; + axienet_iow(lp, tp->reg, reg); + tp++; + } + + lp->options |= options; +} + +static void __axienet_device_reset(struct axienet_local *lp, + struct device *dev, off_t offset) +{ + u32 timeout; + /* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset + * process of Axi DMA takes a while to complete as all pending + * commands/transfers will be flushed or completed during this + * reset process. */ + axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK); + timeout = DELAY_OF_ONE_MILLISEC; + while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(dev, "axienet_device_reset DMA " + "reset timeout!\n"); + break; + } + } +} + +/** + * axienet_device_reset - Reset and initialize the Axi Ethernet hardware. + * @ndev: Pointer to the net_device structure + * + * This function is called to reset and initialize the Axi Ethernet core. This + * is typically called during initialization. It does a reset of the Axi DMA + * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines + * areconnected to Axi Ethernet reset lines, this in turn resets the Axi + * Ethernet core. No separate hardware reset is done for the Axi Ethernet + * core. + */ +static void axienet_device_reset(struct net_device *ndev) +{ + u32 axienet_status; + struct axienet_local *lp = netdev_priv(ndev); + + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); + + lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; + lp->options &= (~XAE_OPTION_JUMBO); + + if ((ndev->mtu > XAE_MTU) && + (ndev->mtu <= XAE_JUMBO_MTU) && + (lp->jumbo_support)) { + lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE + + XAE_TRL_SIZE; + lp->options |= XAE_OPTION_JUMBO; + } + + if (axienet_dma_bd_init(ndev)) { + dev_err(&ndev->dev, "axienet_device_reset descriptor " + "allocation failed\n"); + } + + axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); + axienet_status &= ~XAE_RCW1_RX_MASK; + axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); + + axienet_status = axienet_ior(lp, XAE_IP_OFFSET); + if (axienet_status & XAE_INT_RXRJECT_MASK) + axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); + + axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); + + /* Sync default options with HW but leave receiver and + * transmitter disabled.*/ + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + axienet_set_mac_address(ndev, NULL); + axienet_set_multicast_list(ndev); + axienet_setoptions(ndev, lp->options); + + ndev->trans_start = jiffies; +} + +/** + * axienet_adjust_link - Adjust the PHY link speed/duplex. + * @ndev: Pointer to the net_device structure + * + * This function is called to change the speed and duplex setting after + * auto negotiation is done by the PHY. This is the function that gets + * registered with the PHY interface through the "of_phy_connect" call. + */ +static void axienet_adjust_link(struct net_device *ndev) +{ + u32 emmc_reg; + u32 link_state; + u32 setspeed = 1; + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phy = lp->phy_dev; + + link_state = phy->speed | (phy->duplex << 1) | phy->link; + if (lp->last_link != link_state) { + if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) { + if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X) + setspeed = 0; + } else { + if ((phy->speed == SPEED_1000) && + (lp->phy_type == XAE_PHY_TYPE_MII)) + setspeed = 0; + } + + if (setspeed == 1) { + emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET); + emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK; + + switch (phy->speed) { + case SPEED_1000: + emmc_reg |= XAE_EMMC_LINKSPD_1000; + break; + case SPEED_100: + emmc_reg |= XAE_EMMC_LINKSPD_100; + break; + case SPEED_10: + emmc_reg |= XAE_EMMC_LINKSPD_10; + break; + default: + dev_err(&ndev->dev, "Speed other than 10, 100 " + "or 1Gbps is not supported\n"); + break; + } + + axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg); + lp->last_link = link_state; + phy_print_status(phy); + } else { + dev_err(&ndev->dev, "Error setting Axi Ethernet " + "mac speed\n"); + } + } +} + +/** + * axienet_start_xmit_done - Invoked once a transmit is completed by the + * Axi DMA Tx channel. + * @ndev: Pointer to the net_device structure + * + * This function is invoked from the Axi DMA Tx isr to notify the completion + * of transmit operation. It clears fields in the corresponding Tx BDs and + * unmaps the corresponding buffer so that CPU can regain ownership of the + * buffer. It finally invokes "netif_wake_queue" to restart transmission if + * required. + */ +static void axienet_start_xmit_done(struct net_device *ndev) +{ + u32 size = 0; + u32 packets = 0; + struct axienet_local *lp = netdev_priv(ndev); + struct axidma_bd *cur_p; + unsigned int status = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + status = cur_p->status; + while (status & XAXIDMA_BD_STS_COMPLETE_MASK) { + dma_unmap_single(ndev->dev.parent, cur_p->phys, + (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK), + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); + /*cur_p->phys = 0;*/ + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app4 = 0; + cur_p->status = 0; + + size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; + packets++; + + ++lp->tx_bd_ci; + lp->tx_bd_ci %= TX_BD_NUM; + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + status = cur_p->status; + } + + ndev->stats.tx_packets += packets; + ndev->stats.tx_bytes += size; + netif_wake_queue(ndev); +} + +/** + * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy + * @lp: Pointer to the axienet_local structure + * @num_frag: The number of BDs to check for + * + * returns: 0, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free + * + * This function is invoked before BDs are allocated and transmission starts. + * This function returns 0 if a BD or group of BDs can be allocated for + * transmission. If the BD or any of the BDs are not free the function + * returns a busy status. This is invoked from axienet_start_xmit. + */ +static inline int axienet_check_tx_bd_space(struct axienet_local *lp, + int num_frag) +{ + struct axidma_bd *cur_p; + cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM]; + if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK) + return NETDEV_TX_BUSY; + return 0; +} + +/** + * axienet_start_xmit - Starts the transmission. + * @skb: sk_buff pointer that contains data to be Txed. + * @ndev: Pointer to net_device structure. + * + * returns: NETDEV_TX_OK, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free + * + * This function is invoked from upper layers to initiate transmission. The + * function uses the next available free BDs and populates their fields to + * start the transmission. Additionally if checksum offloading is supported, + * it populates AXI Stream Control fields with appropriate values. + */ +static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + u32 ii; + u32 num_frag; + u32 csum_start_off; + u32 csum_index_off; + skb_frag_t *frag; + dma_addr_t tail_p; + struct axienet_local *lp = netdev_priv(ndev); + struct axidma_bd *cur_p; + + num_frag = skb_shinfo(skb)->nr_frags; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + + if (axienet_check_tx_bd_space(lp, num_frag)) { + if (!netif_queue_stopped(ndev)) + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; + } + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { + /* Tx Full Checksum Offload Enabled */ + cur_p->app0 |= 2; + } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { + csum_start_off = skb_transport_offset(skb); + csum_index_off = csum_start_off + skb->csum_offset; + /* Tx Partial Checksum Offload Enabled */ + cur_p->app0 |= 1; + cur_p->app1 = (csum_start_off << 16) | csum_index_off; + } + } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */ + } + + cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK; + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + + for (ii = 0; ii < num_frag; ii++) { + ++lp->tx_bd_tail; + lp->tx_bd_tail %= TX_BD_NUM; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + frag = &skb_shinfo(skb)->frags[ii]; + cur_p->phys = dma_map_single(ndev->dev.parent, + skb_frag_address(frag), + skb_frag_size(frag), + DMA_TO_DEVICE); + cur_p->cntrl = skb_frag_size(frag); + } + + cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK; + cur_p->app4 = (unsigned long)skb; + + tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + /* Start the transfer */ + axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p); + ++lp->tx_bd_tail; + lp->tx_bd_tail %= TX_BD_NUM; + + return NETDEV_TX_OK; +} + +/** + * axienet_recv - Is called from Axi DMA Rx Isr to complete the received + * BD processing. + * @ndev: Pointer to net_device structure. + * + * This function is invoked from the Axi DMA Rx isr to process the Rx BDs. It + * does minimal processing and invokes "netif_rx" to complete further + * processing. + */ +static void axienet_recv(struct net_device *ndev) +{ + u32 length; + u32 csumstatus; + u32 size = 0; + u32 packets = 0; + dma_addr_t tail_p; + struct axienet_local *lp = netdev_priv(ndev); + struct sk_buff *skb, *new_skb; + struct axidma_bd *cur_p; + + tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + + while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) { + skb = (struct sk_buff *) (cur_p->sw_id_offset); + length = cur_p->app4 & 0x0000FFFF; + + dma_unmap_single(ndev->dev.parent, cur_p->phys, + lp->max_frm_size, + DMA_FROM_DEVICE); + + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, ndev); + /*skb_checksum_none_assert(skb);*/ + skb->ip_summed = CHECKSUM_NONE; + + /* if we're doing Rx csum offload, set it up */ + if (lp->features & XAE_FEATURE_FULL_RX_CSUM) { + csumstatus = (cur_p->app2 & + XAE_FULL_CSUM_STATUS_MASK) >> 3; + if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) || + (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 && + skb->protocol == htons(ETH_P_IP) && + skb->len > 64) { + skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF); + skb->ip_summed = CHECKSUM_COMPLETE; + } + + netif_rx(skb); + + size += length; + packets++; + + new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); + if (!new_skb) + return; + + cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, + lp->max_frm_size, + DMA_FROM_DEVICE); + cur_p->cntrl = lp->max_frm_size; + cur_p->status = 0; + cur_p->sw_id_offset = (u32) new_skb; + + ++lp->rx_bd_ci; + lp->rx_bd_ci %= RX_BD_NUM; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + } + + ndev->stats.rx_packets += packets; + ndev->stats.rx_bytes += size; + + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p); +} + +/** + * axienet_tx_irq - Tx Done Isr. + * @irq: irq number + * @_ndev: net_device pointer + * + * returns: IRQ_HANDLED for all cases. + * + * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" + * to complete the BD processing. + */ +static irqreturn_t axienet_tx_irq(int irq, void *_ndev) +{ + u32 cr; + unsigned int status; + struct net_device *ndev = _ndev; + struct axienet_local *lp = netdev_priv(ndev); + + status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); + if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { + axienet_start_xmit_done(lp->ndev); + goto out; + } + if (!(status & XAXIDMA_IRQ_ALL_MASK)) + dev_err(&ndev->dev, "No interrupts asserted in Tx path"); + if (status & XAXIDMA_IRQ_ERROR_MASK) { + dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status); + dev_err(&ndev->dev, "Current BD is at: 0x%x\n", + (lp->tx_bd_v[lp->tx_bd_ci]).phys); + + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + tasklet_schedule(&lp->dma_err_tasklet); + } +out: + axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status); + return IRQ_HANDLED; +} + +/** + * axienet_rx_irq - Rx Isr. + * @irq: irq number + * @_ndev: net_device pointer + * + * returns: IRQ_HANDLED for all cases. + * + * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD + * processing. + */ +static irqreturn_t axienet_rx_irq(int irq, void *_ndev) +{ + u32 cr; + unsigned int status; + struct net_device *ndev = _ndev; + struct axienet_local *lp = netdev_priv(ndev); + + status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); + if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { + axienet_recv(lp->ndev); + goto out; + } + if (!(status & XAXIDMA_IRQ_ALL_MASK)) + dev_err(&ndev->dev, "No interrupts asserted in Rx path"); + if (status & XAXIDMA_IRQ_ERROR_MASK) { + dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status); + dev_err(&ndev->dev, "Current BD is at: 0x%x\n", + (lp->rx_bd_v[lp->rx_bd_ci]).phys); + + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Finally write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + tasklet_schedule(&lp->dma_err_tasklet); + } +out: + axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status); + return IRQ_HANDLED; +} + +static void axienet_dma_err_handler(unsigned long data); + +/** + * axienet_open - Driver open routine. + * @ndev: Pointer to net_device structure + * + * returns: 0, on success. + * -ENODEV, if PHY cannot be connected to + * non-zero error value on failure + * + * This is the driver open routine. It calls phy_start to start the PHY device. + * It also allocates interrupt service routines, enables the interrupt lines + * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer + * descriptors are initialized. + */ +static int axienet_open(struct net_device *ndev) +{ + int ret, mdio_mcreg; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "axienet_open()\n"); + + mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + /* Disable the MDIO interface till Axi Ethernet Reset is completed. + * When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. If MDIO is not disabled when the reset + * process is started, MDIO will be broken afterwards. */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK))); + axienet_device_reset(ndev); + /* Enable the MDIO */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + if (lp->phy_node) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + axienet_adjust_link, 0, + PHY_INTERFACE_MODE_GMII); + if (!lp->phy_dev) { + dev_err(lp->dev, "of_phy_connect() failed\n"); + return -ENODEV; + } + phy_start(lp->phy_dev); + } + + /* Enable tasklets for Axi DMA error handling */ + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + + /* Enable interrupts for Axi DMA Tx */ + ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); + if (ret) + goto err_tx_irq; + /* Enable interrupts for Axi DMA Rx */ + ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); + if (ret) + goto err_rx_irq; + + return 0; + +err_rx_irq: + free_irq(lp->tx_irq, ndev); +err_tx_irq: + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + tasklet_kill(&lp->dma_err_tasklet); + dev_err(lp->dev, "request_irq() failed\n"); + return ret; +} + +/** + * axienet_stop - Driver stop routine. + * @ndev: Pointer to net_device structure + * + * returns: 0, on success. + * + * This is the driver stop routine. It calls phy_disconnect to stop the PHY + * device. It also removes the interrupt handlers and disables the interrupts. + * The Axi DMA Tx/Rx BDs are released. + */ +static int axienet_stop(struct net_device *ndev) +{ + u32 cr; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "axienet_close()\n"); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr & (~XAXIDMA_CR_RUNSTOP_MASK)); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr & (~XAXIDMA_CR_RUNSTOP_MASK)); + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + + tasklet_kill(&lp->dma_err_tasklet); + + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + axienet_dma_bd_release(ndev); + return 0; +} + +/** + * axienet_change_mtu - Driver change mtu routine. + * @ndev: Pointer to net_device structure + * @new_mtu: New mtu value to be applied + * + * returns: Always returns 0 (success). + * + * This is the change mtu driver routine. It checks if the Axi Ethernet + * hardware supports jumbo frames before changing the mtu. This can be + * called only when the device is not up. + */ +static int axienet_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) + return -EBUSY; + if (lp->jumbo_support) { + if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) + return -EINVAL; + ndev->mtu = new_mtu; + } else { + if ((new_mtu > XAE_MTU) || (new_mtu < 64)) + return -EINVAL; + ndev->mtu = new_mtu; + } + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * axienet_poll_controller - Axi Ethernet poll mechanism. + * @ndev: Pointer to net_device structure + * + * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior + * to polling the ISRs and are enabled back after the polling is done. + */ +static void axienet_poll_controller(struct net_device *ndev) +{ + struct axienet_local *lp = netdev_priv(ndev); + disable_irq(lp->tx_irq); + disable_irq(lp->rx_irq); + axienet_rx_irq(lp->tx_irq, ndev); + axienet_tx_irq(lp->rx_irq, ndev); + enable_irq(lp->tx_irq); + enable_irq(lp->rx_irq); +} +#endif + +static const struct net_device_ops axienet_netdev_ops = { + .ndo_open = axienet_open, + .ndo_stop = axienet_stop, + .ndo_start_xmit = axienet_start_xmit, + .ndo_change_mtu = axienet_change_mtu, + .ndo_set_mac_address = netdev_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = axienet_set_multicast_list, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = axienet_poll_controller, +#endif +}; + +/** + * axienet_ethtools_get_settings - Get Axi Ethernet settings related to PHY. + * @ndev: Pointer to net_device structure + * @ecmd: Pointer to ethtool_cmd structure + * + * This implements ethtool command for getting PHY settings. If PHY could + * not be found, the function returns -ENODEV. This function calls the + * relevant PHY ethtool API to get the PHY settings. + * Issue "ethtool ethX" under linux prompt to execute this function. + */ +static int axienet_ethtools_get_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phydev = lp->phy_dev; + if (!phydev) + return -ENODEV; + return phy_ethtool_gset(phydev, ecmd); +} + +/** + * axienet_ethtools_set_settings - Set PHY settings as passed in the argument. + * @ndev: Pointer to net_device structure + * @ecmd: Pointer to ethtool_cmd structure + * + * This implements ethtool command for setting various PHY settings. If PHY + * could not be found, the function returns -ENODEV. This function calls the + * relevant PHY ethtool API to set the PHY. + * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this + * function. + */ +static int axienet_ethtools_set_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phydev = lp->phy_dev; + if (!phydev) + return -ENODEV; + return phy_ethtool_sset(phydev, ecmd); +} + +/** + * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information. + * @ndev: Pointer to net_device structure + * @ed: Pointer to ethtool_drvinfo structure + * + * This implements ethtool command for getting the driver information. + * Issue "ethtool -i ethX" under linux prompt to execute this function. + */ +static void axienet_ethtools_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *ed) +{ + strlcpy(ed->driver, DRIVER_NAME, sizeof(ed->driver)); + strlcpy(ed->version, DRIVER_VERSION, sizeof(ed->version)); + ed->regdump_len = sizeof(u32) * AXIENET_REGS_N; +} + +/** + * axienet_ethtools_get_regs_len - Get the total regs length present in the + * AxiEthernet core. + * @ndev: Pointer to net_device structure + * + * This implements ethtool command for getting the total register length + * information. + */ +static int axienet_ethtools_get_regs_len(struct net_device *ndev) +{ + return sizeof(u32) * AXIENET_REGS_N; +} + +/** + * axienet_ethtools_get_regs - Dump the contents of all registers present + * in AxiEthernet core. + * @ndev: Pointer to net_device structure + * @regs: Pointer to ethtool_regs structure + * @ret: Void pointer used to return the contents of the registers. + * + * This implements ethtool command for getting the Axi Ethernet register dump. + * Issue "ethtool -d ethX" to execute this function. + */ +static void axienet_ethtools_get_regs(struct net_device *ndev, + struct ethtool_regs *regs, void *ret) +{ + u32 *data = (u32 *) ret; + size_t len = sizeof(u32) * AXIENET_REGS_N; + struct axienet_local *lp = netdev_priv(ndev); + + regs->version = 0; + regs->len = len; + + memset(data, 0, len); + data[0] = axienet_ior(lp, XAE_RAF_OFFSET); + data[1] = axienet_ior(lp, XAE_TPF_OFFSET); + data[2] = axienet_ior(lp, XAE_IFGP_OFFSET); + data[3] = axienet_ior(lp, XAE_IS_OFFSET); + data[4] = axienet_ior(lp, XAE_IP_OFFSET); + data[5] = axienet_ior(lp, XAE_IE_OFFSET); + data[6] = axienet_ior(lp, XAE_TTAG_OFFSET); + data[7] = axienet_ior(lp, XAE_RTAG_OFFSET); + data[8] = axienet_ior(lp, XAE_UAWL_OFFSET); + data[9] = axienet_ior(lp, XAE_UAWU_OFFSET); + data[10] = axienet_ior(lp, XAE_TPID0_OFFSET); + data[11] = axienet_ior(lp, XAE_TPID1_OFFSET); + data[12] = axienet_ior(lp, XAE_PPST_OFFSET); + data[13] = axienet_ior(lp, XAE_RCW0_OFFSET); + data[14] = axienet_ior(lp, XAE_RCW1_OFFSET); + data[15] = axienet_ior(lp, XAE_TC_OFFSET); + data[16] = axienet_ior(lp, XAE_FCC_OFFSET); + data[17] = axienet_ior(lp, XAE_EMMC_OFFSET); + data[18] = axienet_ior(lp, XAE_PHYC_OFFSET); + data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET); + data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET); + data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET); + data[23] = axienet_ior(lp, XAE_MDIO_MIS_OFFSET); + data[24] = axienet_ior(lp, XAE_MDIO_MIP_OFFSET); + data[25] = axienet_ior(lp, XAE_MDIO_MIE_OFFSET); + data[26] = axienet_ior(lp, XAE_MDIO_MIC_OFFSET); + data[27] = axienet_ior(lp, XAE_UAW0_OFFSET); + data[28] = axienet_ior(lp, XAE_UAW1_OFFSET); + data[29] = axienet_ior(lp, XAE_FMI_OFFSET); + data[30] = axienet_ior(lp, XAE_AF0_OFFSET); + data[31] = axienet_ior(lp, XAE_AF1_OFFSET); +} + +/** + * axienet_ethtools_get_pauseparam - Get the pause parameter setting for + * Tx and Rx paths. + * @ndev: Pointer to net_device structure + * @epauseparm: Pointer to ethtool_pauseparam structure. + * + * This implements ethtool command for getting axi ethernet pause frame + * setting. Issue "ethtool -a ethX" to execute this function. + */ +static void +axienet_ethtools_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *epauseparm) +{ + u32 regval; + struct axienet_local *lp = netdev_priv(ndev); + epauseparm->autoneg = 0; + regval = axienet_ior(lp, XAE_FCC_OFFSET); + epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK; + epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK; +} + +/** + * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control) + * settings. + * @ndev: Pointer to net_device structure + * @epauseparam:Pointer to ethtool_pauseparam structure + * + * This implements ethtool command for enabling flow control on Rx and Tx + * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this + * function. + */ +static int +axienet_ethtools_set_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *epauseparm) +{ + u32 regval = 0; + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + printk(KERN_ERR "%s: Please stop netif before applying " + "configruation\n", ndev->name); + return -EFAULT; + } + + regval = axienet_ior(lp, XAE_FCC_OFFSET); + if (epauseparm->tx_pause) + regval |= XAE_FCC_FCTX_MASK; + else + regval &= ~XAE_FCC_FCTX_MASK; + if (epauseparm->rx_pause) + regval |= XAE_FCC_FCRX_MASK; + else + regval &= ~XAE_FCC_FCRX_MASK; + axienet_iow(lp, XAE_FCC_OFFSET, regval); + + return 0; +} + +/** + * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count. + * @ndev: Pointer to net_device structure + * @ecoalesce: Pointer to ethtool_coalesce structure + * + * This implements ethtool command for getting the DMA interrupt coalescing + * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to + * execute this function. + */ +static int axienet_ethtools_get_coalesce(struct net_device *ndev, + struct ethtool_coalesce *ecoalesce) +{ + u32 regval = 0; + struct axienet_local *lp = netdev_priv(ndev); + regval = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) + >> XAXIDMA_COALESCE_SHIFT; + regval = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) + >> XAXIDMA_COALESCE_SHIFT; + return 0; +} + +/** + * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count. + * @ndev: Pointer to net_device structure + * @ecoalesce: Pointer to ethtool_coalesce structure + * + * This implements ethtool command for setting the DMA interrupt coalescing + * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux + * prompt to execute this function. + */ +static int axienet_ethtools_set_coalesce(struct net_device *ndev, + struct ethtool_coalesce *ecoalesce) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + printk(KERN_ERR "%s: Please stop netif before applying " + "configruation\n", ndev->name); + return -EFAULT; + } + + if ((ecoalesce->rx_coalesce_usecs) || + (ecoalesce->rx_coalesce_usecs_irq) || + (ecoalesce->rx_max_coalesced_frames_irq) || + (ecoalesce->tx_coalesce_usecs) || + (ecoalesce->tx_coalesce_usecs_irq) || + (ecoalesce->tx_max_coalesced_frames_irq) || + (ecoalesce->stats_block_coalesce_usecs) || + (ecoalesce->use_adaptive_rx_coalesce) || + (ecoalesce->use_adaptive_tx_coalesce) || + (ecoalesce->pkt_rate_low) || + (ecoalesce->rx_coalesce_usecs_low) || + (ecoalesce->rx_max_coalesced_frames_low) || + (ecoalesce->tx_coalesce_usecs_low) || + (ecoalesce->tx_max_coalesced_frames_low) || + (ecoalesce->pkt_rate_high) || + (ecoalesce->rx_coalesce_usecs_high) || + (ecoalesce->rx_max_coalesced_frames_high) || + (ecoalesce->tx_coalesce_usecs_high) || + (ecoalesce->tx_max_coalesced_frames_high) || + (ecoalesce->rate_sample_interval)) + return -EOPNOTSUPP; + if (ecoalesce->rx_max_coalesced_frames) + lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames; + if (ecoalesce->tx_max_coalesced_frames) + lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames; + + return 0; +} + +static struct ethtool_ops axienet_ethtool_ops = { + .get_settings = axienet_ethtools_get_settings, + .set_settings = axienet_ethtools_set_settings, + .get_drvinfo = axienet_ethtools_get_drvinfo, + .get_regs_len = axienet_ethtools_get_regs_len, + .get_regs = axienet_ethtools_get_regs, + .get_link = ethtool_op_get_link, + .get_pauseparam = axienet_ethtools_get_pauseparam, + .set_pauseparam = axienet_ethtools_set_pauseparam, + .get_coalesce = axienet_ethtools_get_coalesce, + .set_coalesce = axienet_ethtools_set_coalesce, +}; + +/** + * axienet_dma_err_handler - Tasklet handler for Axi DMA Error + * @data: Data passed + * + * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the + * Tx/Rx BDs. + */ +static void axienet_dma_err_handler(unsigned long data) +{ + u32 axienet_status; + u32 cr, i; + int mdio_mcreg; + struct axienet_local *lp = (struct axienet_local *) data; + struct net_device *ndev = lp->ndev; + struct axidma_bd *cur_p; + + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + axienet_mdio_wait_until_ready(lp); + /* Disable the MDIO interface till Axi Ethernet Reset is completed. + * When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. So if MDIO is not disabled when the reset + * process is started, MDIO will be broken afterwards. */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & + ~XAE_MDIO_MC_MDIOEN_MASK)); + + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); + + axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); + axienet_mdio_wait_until_ready(lp); + + for (i = 0; i < TX_BD_NUM; i++) { + cur_p = &lp->tx_bd_v[i]; + if (cur_p->phys) + dma_unmap_single(ndev->dev.parent, cur_p->phys, + (cur_p->cntrl & + XAXIDMA_BD_CTRL_LENGTH_MASK), + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *) cur_p->app4); + cur_p->phys = 0; + cur_p->cntrl = 0; + cur_p->status = 0; + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app3 = 0; + cur_p->app4 = 0; + cur_p->sw_id_offset = 0; + } + + for (i = 0; i < RX_BD_NUM; i++) { + cur_p = &lp->rx_bd_v[i]; + cur_p->status = 0; + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app3 = 0; + cur_p->app4 = 0; + } + + lp->tx_bd_ci = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + + /* Start updating the Rx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = ((cr & ~XAXIDMA_COALESCE_MASK) | + (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = ((cr & ~XAXIDMA_DELAY_MASK) | + (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Finally write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + /* Start updating the Tx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | + (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = (((cr & ~XAXIDMA_DELAY_MASK)) | + (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Finally write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + /* Populate the tail pointer and bring the Rx Axi DMA engine out of + * halted state. This will make the Rx side ready for reception.*/ + axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + + /* Write to the RS (Run-stop) bit in the Tx channel control register. + * Tx channel is now ready to run. But only after we write to the + * tail pointer register that the Tx channel will start transmitting */ + axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + + axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); + axienet_status &= ~XAE_RCW1_RX_MASK; + axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); + + axienet_status = axienet_ior(lp, XAE_IP_OFFSET); + if (axienet_status & XAE_INT_RXRJECT_MASK) + axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); + axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); + + /* Sync default options with HW but leave receiver and + * transmitter disabled.*/ + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + axienet_set_mac_address(ndev, NULL); + axienet_set_multicast_list(ndev); + axienet_setoptions(ndev, lp->options); +} + +/** + * axienet_of_probe - Axi Ethernet probe function. + * @op: Pointer to platform device structure. + * @match: Pointer to device id structure + * + * returns: 0, on success + * Non-zero error value on failure. + * + * This is the probe routine for Axi Ethernet driver. This is called before + * any other driver routines are invoked. It allocates and sets up the Ethernet + * device. Parses through device tree and populates fields of + * axienet_local. It registers the Ethernet device. + */ +static int axienet_of_probe(struct platform_device *op) +{ + __be32 *p; + int size, ret = 0; + struct device_node *np; + struct axienet_local *lp; + struct net_device *ndev; + const void *addr; + + ndev = alloc_etherdev(sizeof(*lp)); + if (!ndev) + return -ENOMEM; + + platform_set_drvdata(op, ndev); + + SET_NETDEV_DEV(ndev, &op->dev); + ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ + ndev->features = NETIF_F_SG; + ndev->netdev_ops = &axienet_netdev_ops; + ndev->ethtool_ops = &axienet_ethtool_ops; + + lp = netdev_priv(ndev); + lp->ndev = ndev; + lp->dev = &op->dev; + lp->options = XAE_OPTION_DEFAULTS; + /* Map device registers */ + lp->regs = of_iomap(op->dev.of_node, 0); + if (!lp->regs) { + dev_err(&op->dev, "could not map Axi Ethernet regs.\n"); + ret = -ENOMEM; + goto nodev; + } + /* Setup checksum offload, but default to off if not specified */ + lp->features = 0; + + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL); + if (p) { + switch (be32_to_cpup(p)) { + case 1: + lp->csum_offload_on_tx_path = + XAE_FEATURE_PARTIAL_TX_CSUM; + lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM; + /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_IP_CSUM; + break; + case 2: + lp->csum_offload_on_tx_path = + XAE_FEATURE_FULL_TX_CSUM; + lp->features |= XAE_FEATURE_FULL_TX_CSUM; + /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_IP_CSUM; + break; + default: + lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD; + } + } + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL); + if (p) { + switch (be32_to_cpup(p)) { + case 1: + lp->csum_offload_on_rx_path = + XAE_FEATURE_PARTIAL_RX_CSUM; + lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM; + break; + case 2: + lp->csum_offload_on_rx_path = + XAE_FEATURE_FULL_RX_CSUM; + lp->features |= XAE_FEATURE_FULL_RX_CSUM; + break; + default: + lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD; + } + } + /* For supporting jumbo frames, the Axi Ethernet hardware must have + * a larger Rx/Tx Memory. Typically, the size must be more than or + * equal to 16384 bytes, so that we can enable jumbo option and start + * supporting jumbo frames. Here we check for memory allocated for + * Rx/Tx in the hardware from the device-tree and accordingly set + * flags. */ + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL); + if (p) { + if ((be32_to_cpup(p)) >= 0x4000) + lp->jumbo_support = 1; + } + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); + if (p) + lp->phy_type = be32_to_cpup(p); + + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0); + if (!np) { + dev_err(&op->dev, "could not find DMA node\n"); + ret = -ENODEV; + goto err_iounmap; + } + lp->dma_regs = of_iomap(np, 0); + if (lp->dma_regs) { + dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs); + } else { + dev_err(&op->dev, "unable to map DMA registers\n"); + of_node_put(np); + } + lp->rx_irq = irq_of_parse_and_map(np, 1); + lp->tx_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { + dev_err(&op->dev, "could not determine irqs\n"); + ret = -ENOMEM; + goto err_iounmap_2; + } + + /* Retrieve the MAC address */ + addr = of_get_property(op->dev.of_node, "local-mac-address", &size); + if ((!addr) || (size != 6)) { + dev_err(&op->dev, "could not find MAC address\n"); + ret = -ENODEV; + goto err_iounmap_2; + } + axienet_set_mac_address(ndev, (void *) addr); + + lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; + lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; + + lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); + ret = axienet_mdio_setup(lp, op->dev.of_node); + if (ret) + dev_warn(&op->dev, "error registering MDIO bus\n"); + + ret = register_netdev(lp->ndev); + if (ret) { + dev_err(lp->dev, "register_netdev() error (%i)\n", ret); + goto err_iounmap_2; + } + + return 0; + +err_iounmap_2: + if (lp->dma_regs) + iounmap(lp->dma_regs); +err_iounmap: + iounmap(lp->regs); +nodev: + free_netdev(ndev); + ndev = NULL; + return ret; +} + +static int axienet_of_remove(struct platform_device *op) +{ + struct net_device *ndev = platform_get_drvdata(op); + struct axienet_local *lp = netdev_priv(ndev); + + axienet_mdio_teardown(lp); + unregister_netdev(ndev); + + of_node_put(lp->phy_node); + lp->phy_node = NULL; + + iounmap(lp->regs); + if (lp->dma_regs) + iounmap(lp->dma_regs); + free_netdev(ndev); + + return 0; +} + +static struct platform_driver axienet_of_driver = { + .probe = axienet_of_probe, + .remove = axienet_of_remove, + .driver = { + .name = "xilinx_axienet", + .of_match_table = axienet_of_match, + }, +}; + +module_platform_driver(axienet_of_driver); + +MODULE_DESCRIPTION("Xilinx Axi Ethernet driver"); +MODULE_AUTHOR("Xilinx"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c new file mode 100644 index 000000000..3b67d60d4 --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -0,0 +1,239 @@ +/* + * MDIO bus driver for the Xilinx Axi Ethernet device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. + */ + +#include +#include +#include + +#include "xilinx_axienet.h" + +#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */ +#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT + +/* Wait till MDIO interface is ready to accept a new transaction.*/ +int axienet_mdio_wait_until_ready(struct axienet_local *lp) +{ + unsigned long end = jiffies + 2; + while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) & + XAE_MDIO_MCR_READY_MASK)) { + if (time_before_eq(end, jiffies)) { + WARN_ON(1); + return -ETIMEDOUT; + } + udelay(1); + } + return 0; +} + +/** + * axienet_mdio_read - MDIO interface read function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to read + * + * returns: The register contents on success, -ETIMEDOUT on a timeout + * + * Reads the contents of the requested register from the requested PHY + * address by first writing the details into MCR register. After a while + * the register MRD is read to obtain the PHY register content. + */ +static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + u32 rc; + int ret; + struct axienet_local *lp = bus->priv; + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_READ_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF; + + dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +/** + * axienet_mdio_write - MDIO interface write function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to write to + * @val: Value to be written into the register + * + * returns: 0 on success, -ETIMEDOUT on a timeout + * + * Writes the value to the requested register by first writing the value + * into MWD register. The the MCR register is then appropriately setup + * to finish the write operation. + */ +static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + int ret; + struct axienet_local *lp = bus->priv; + + dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val); + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_WRITE_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + return 0; +} + +/** + * axienet_mdio_setup - MDIO setup function + * @lp: Pointer to axienet local data structure. + * @np: Pointer to device node + * + * returns: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when + * mdiobus_alloc (to allocate memory for mii bus structure) fails. + * + * Sets up the MDIO interface by initializing the MDIO clock and enabling the + * MDIO interface in hardware. Register the MDIO interface. + **/ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) +{ + int ret; + u32 clk_div, host_clock; + u32 *property_p; + struct mii_bus *bus; + struct resource res; + struct device_node *np1; + + /* clk_div can be calculated by deriving it from the equation: + * fMDIO = fHOST / ((1 + clk_div) * 2) + * + * Where fMDIO <= 2500000, so we get: + * fHOST / ((1 + clk_div) * 2) <= 2500000 + * + * Then we get: + * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= (5000000 / fHOST) + * + * So: + * (1 + clk_div) >= (fHOST / 5000000) + * + * And finally: + * clk_div >= (fHOST / 5000000) - 1 + * + * fHOST can be read from the flattened device tree as property + * "clock-frequency" from the CPU + */ + + np1 = of_find_node_by_name(NULL, "cpu"); + if (!np1) { + printk(KERN_WARNING "%s(): Could not find CPU device node.", + __func__); + printk(KERN_WARNING "Setting MDIO clock divisor to " + "default %d\n", DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + goto issue; + } + property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL); + if (!property_p) { + printk(KERN_WARNING "%s(): Could not find CPU property: " + "clock-frequency.", __func__); + printk(KERN_WARNING "Setting MDIO clock divisor to " + "default %d\n", DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + of_node_put(np1); + goto issue; + } + + host_clock = be32_to_cpup(property_p); + clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; + /* If there is any remainder from the division of + * fHOST / (MAX_MDIO_FREQ * 2), then we need to add + * 1 to the clock divisor or we will surely be above 2.5 MHz */ + if (host_clock % (MAX_MDIO_FREQ * 2)) + clk_div++; + + printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based " + "on %u Hz host clock.\n", __func__, clk_div, host_clock); + + of_node_put(np1); +issue: + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + np1 = of_get_parent(lp->phy_node); + of_address_to_resource(np1, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long) res.start); + + bus->priv = lp; + bus->name = "Xilinx Axi Ethernet MDIO"; + bus->read = axienet_mdio_read; + bus->write = axienet_mdio_write; + bus->parent = lp->dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + lp->mii_bus = bus; + + ret = of_mdiobus_register(bus, np1); + if (ret) { + mdiobus_free(bus); + return ret; + } + return 0; +} + +/** + * axienet_mdio_teardown - MDIO remove function + * @lp: Pointer to axienet local data structure. + * + * Unregisters the MDIO and frees any associate memory for mii bus. + */ +void axienet_mdio_teardown(struct axienet_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +} diff --git a/kernel/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/kernel/drivers/net/ethernet/xilinx/xilinx_emaclite.c new file mode 100644 index 000000000..6008eee01 --- /dev/null +++ b/kernel/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -0,0 +1,1258 @@ +/* + * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. + * + * This is a new flat driver which is based on the original emac_lite + * driver from John Williams . + * + * 2007 - 2013 (c) Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "xilinx_emaclite" + +/* Register offsets for the EmacLite Core */ +#define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */ +#define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */ +#define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */ +#define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */ +#define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */ +#define XEL_GIER_OFFSET 0x07F8 /* GIE Register */ +#define XEL_TSR_OFFSET 0x07FC /* Tx status */ +#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ + +#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ +#define XEL_RPLR_OFFSET 0x100C /* Rx packet length */ +#define XEL_RSR_OFFSET 0x17FC /* Rx status */ + +#define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */ + +/* MDIO Address Register Bit Masks */ +#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */ +#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */ +#define XEL_MDIOADDR_PHYADR_SHIFT 5 +#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */ + +/* MDIO Write Data Register Bit Masks */ +#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */ + +/* MDIO Read Data Register Bit Masks */ +#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */ + +/* MDIO Control Register Bit Masks */ +#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */ +#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */ + +/* Global Interrupt Enable Register (GIER) Bit Masks */ +#define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */ + +/* Transmit Status Register (TSR) Bit Masks */ +#define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */ +#define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */ +#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */ +#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit + * only. This is not documented + * in the HW spec */ + +/* Define for programming the MAC address into the EmacLite */ +#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) + +/* Receive Status Register (RSR) */ +#define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */ +#define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */ + +/* Transmit Packet Length Register (TPLR) */ +#define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */ + +/* Receive Packet Length Register (RPLR) */ +#define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */ + +#define XEL_HEADER_OFFSET 12 /* Offset to length field */ +#define XEL_HEADER_SHIFT 16 /* Shift value for length */ + +/* General Ethernet Definitions */ +#define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ +#define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ + + + +#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */ +#define ALIGNMENT 4 + +/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ +#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT) + +/** + * struct net_local - Our private per device data + * @ndev: instance of the network device + * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW + * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW + * @next_tx_buf_to_use: next Tx buffer to write to + * @next_rx_buf_to_use: next Rx buffer to read from + * @base_addr: base address of the Emaclite device + * @reset_lock: lock used for synchronization + * @deferred_skb: holds an skb (for transmission at a later time) when the + * Tx buffer is not free + * @phy_dev: pointer to the PHY device + * @phy_node: pointer to the PHY device node + * @mii_bus: pointer to the MII bus + * @mdio_irqs: IRQs table for MDIO bus + * @last_link: last link status + * @has_mdio: indicates whether MDIO is included in the HW + */ +struct net_local { + + struct net_device *ndev; + + bool tx_ping_pong; + bool rx_ping_pong; + u32 next_tx_buf_to_use; + u32 next_rx_buf_to_use; + void __iomem *base_addr; + + spinlock_t reset_lock; + struct sk_buff *deferred_skb; + + struct phy_device *phy_dev; + struct device_node *phy_node; + + struct mii_bus *mii_bus; + int mdio_irqs[PHY_MAX_ADDR]; + + int last_link; + bool has_mdio; +}; + + +/*************************/ +/* EmacLite driver calls */ +/*************************/ + +/** + * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device + * @drvdata: Pointer to the Emaclite device private data + * + * This function enables the Tx and Rx interrupts for the Emaclite device along + * with the Global Interrupt Enable. + */ +static void xemaclite_enable_interrupts(struct net_local *drvdata) +{ + u32 reg_data; + + /* Enable the Tx interrupts for the first Buffer */ + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_TSR_OFFSET); + + /* Enable the Rx interrupts for the first buffer */ + __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); + + /* Enable the Global Interrupt Enable */ + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); +} + +/** + * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device + * @drvdata: Pointer to the Emaclite device private data + * + * This function disables the Tx and Rx interrupts for the Emaclite device, + * along with the Global Interrupt Enable. + */ +static void xemaclite_disable_interrupts(struct net_local *drvdata) +{ + u32 reg_data; + + /* Disable the Global Interrupt Enable */ + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); + + /* Disable the Tx interrupts for the first buffer */ + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_TSR_OFFSET); + + /* Disable the Rx interrupts for the first buffer */ + reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); + __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_RSR_OFFSET); +} + +/** + * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address + * @src_ptr: Void pointer to the 16-bit aligned source address + * @dest_ptr: Pointer to the 32-bit aligned destination address + * @length: Number bytes to write from source to destination + * + * This function writes data from a 16-bit aligned buffer to a 32-bit aligned + * address in the EmacLite device. + */ +static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, + unsigned length) +{ + u32 align_buffer; + u32 *to_u32_ptr; + u16 *from_u16_ptr, *to_u16_ptr; + + to_u32_ptr = dest_ptr; + from_u16_ptr = src_ptr; + align_buffer = 0; + + for (; length > 3; length -= 4) { + to_u16_ptr = (u16 *)&align_buffer; + *to_u16_ptr++ = *from_u16_ptr++; + *to_u16_ptr++ = *from_u16_ptr++; + + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); + + /* Output a word */ + *to_u32_ptr++ = align_buffer; + } + if (length) { + u8 *from_u8_ptr, *to_u8_ptr; + + /* Set up to output the remaining data */ + align_buffer = 0; + to_u8_ptr = (u8 *) &align_buffer; + from_u8_ptr = (u8 *) from_u16_ptr; + + /* Output the remaining data */ + for (; length > 0; length--) + *to_u8_ptr++ = *from_u8_ptr++; + + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); + *to_u32_ptr = align_buffer; + } +} + +/** + * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer + * @src_ptr: Pointer to the 32-bit aligned source address + * @dest_ptr: Pointer to the 16-bit aligned destination address + * @length: Number bytes to read from source to destination + * + * This function reads data from a 32-bit aligned address in the EmacLite device + * to a 16-bit aligned buffer. + */ +static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, + unsigned length) +{ + u16 *to_u16_ptr, *from_u16_ptr; + u32 *from_u32_ptr; + u32 align_buffer; + + from_u32_ptr = src_ptr; + to_u16_ptr = (u16 *) dest_ptr; + + for (; length > 3; length -= 4) { + /* Copy each word into the temporary buffer */ + align_buffer = *from_u32_ptr++; + from_u16_ptr = (u16 *)&align_buffer; + + /* Read data from source */ + *to_u16_ptr++ = *from_u16_ptr++; + *to_u16_ptr++ = *from_u16_ptr++; + } + + if (length) { + u8 *to_u8_ptr, *from_u8_ptr; + + /* Set up to read the remaining data */ + to_u8_ptr = (u8 *) to_u16_ptr; + align_buffer = *from_u32_ptr++; + from_u8_ptr = (u8 *) &align_buffer; + + /* Read the remaining data */ + for (; length > 0; length--) + *to_u8_ptr = *from_u8_ptr; + } +} + +/** + * xemaclite_send_data - Send an Ethernet frame + * @drvdata: Pointer to the Emaclite device private data + * @data: Pointer to the data to be sent + * @byte_count: Total frame size, including header + * + * This function checks if the Tx buffer of the Emaclite device is free to send + * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it + * returns an error. + * + * Return: 0 upon success or -1 if the buffer(s) are full. + * + * Note: The maximum Tx packet size can not be more than Ethernet header + * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS. + */ +static int xemaclite_send_data(struct net_local *drvdata, u8 *data, + unsigned int byte_count) +{ + u32 reg_data; + void __iomem *addr; + + /* Determine the expected Tx buffer address */ + addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; + + /* If the length is too large, truncate it */ + if (byte_count > ETH_FRAME_LEN) + byte_count = ETH_FRAME_LEN; + + /* Check if the expected buffer is available */ + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | + XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { + + /* Switch to next buffer if configured */ + if (drvdata->tx_ping_pong != 0) + drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; + } else if (drvdata->tx_ping_pong != 0) { + /* If the expected buffer is full, try the other buffer, + * if it is configured in HW */ + + addr = (void __iomem __force *)((u32 __force)addr ^ + XEL_BUFFER_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + + if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | + XEL_TSR_XMIT_ACTIVE_MASK)) != 0) + return -1; /* Buffers were full, return failure */ + } else + return -1; /* Buffer was full, return failure */ + + /* Write the frame to the buffer */ + xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); + + __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK), + addr + XEL_TPLR_OFFSET); + + /* Update the Tx Status Register to indicate that there is a + * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which + * is used by the interrupt handler to check whether a frame + * has been transmitted */ + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); + __raw_writel(reg_data, addr + XEL_TSR_OFFSET); + + return 0; +} + +/** + * xemaclite_recv_data - Receive a frame + * @drvdata: Pointer to the Emaclite device private data + * @data: Address where the data is to be received + * + * This function is intended to be called from the interrupt context or + * with a wrapper which waits for the receive frame to be available. + * + * Return: Total number of bytes received + */ +static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) +{ + void __iomem *addr; + u16 length, proto_type; + u32 reg_data; + + /* Determine the expected buffer address */ + addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); + + /* Verify which buffer has valid data */ + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + + if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { + if (drvdata->rx_ping_pong != 0) + drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET; + } else { + /* The instance is out of sync, try other buffer if other + * buffer is configured, return 0 otherwise. If the instance is + * out of sync, do not update the 'next_rx_buf_to_use' since it + * will correct on subsequent calls */ + if (drvdata->rx_ping_pong != 0) + addr = (void __iomem __force *)((u32 __force)addr ^ + XEL_BUFFER_OFFSET); + else + return 0; /* No data was available */ + + /* Verify that buffer has valid data */ + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + if ((reg_data & XEL_RSR_RECV_DONE_MASK) != + XEL_RSR_RECV_DONE_MASK) + return 0; /* No data was available */ + } + + /* Get the protocol type of the ethernet frame that arrived */ + proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET + + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & + XEL_RPLR_LENGTH_MASK); + + /* Check if received ethernet frame is a raw ethernet frame + * or an IP packet or an ARP packet */ + if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { + + if (proto_type == ETH_P_IP) { + length = ((ntohl(__raw_readl(addr + + XEL_HEADER_IP_LENGTH_OFFSET + + XEL_RXBUFF_OFFSET)) >> + XEL_HEADER_SHIFT) & + XEL_RPLR_LENGTH_MASK); + length += ETH_HLEN + ETH_FCS_LEN; + + } else if (proto_type == ETH_P_ARP) + length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; + else + /* Field contains type other than IP or ARP, use max + * frame size and let user parse it */ + length = ETH_FRAME_LEN + ETH_FCS_LEN; + } else + /* Use the length in the frame, plus the header and trailer */ + length = proto_type + ETH_HLEN + ETH_FCS_LEN; + + /* Read from the EmacLite device */ + xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET), + data, length); + + /* Acknowledge the frame */ + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); + reg_data &= ~XEL_RSR_RECV_DONE_MASK; + __raw_writel(reg_data, addr + XEL_RSR_OFFSET); + + return length; +} + +/** + * xemaclite_update_address - Update the MAC address in the device + * @drvdata: Pointer to the Emaclite device private data + * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value) + * + * Tx must be idle and Rx should be idle for deterministic results. + * It is recommended that this function should be called after the + * initialization and before transmission of any packets from the device. + * The MAC address can be programmed using any of the two transmit + * buffers (if configured). + */ +static void xemaclite_update_address(struct net_local *drvdata, + u8 *address_ptr) +{ + void __iomem *addr; + u32 reg_data; + + /* Determine the expected Tx buffer address */ + addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; + + xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); + + __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); + + /* Update the MAC address in the EmacLite */ + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); + + /* Wait for EmacLite to finish with the MAC address update */ + while ((__raw_readl(addr + XEL_TSR_OFFSET) & + XEL_TSR_PROG_MAC_ADDR) != 0) + ; +} + +/** + * xemaclite_set_mac_address - Set the MAC address for this device + * @dev: Pointer to the network device instance + * @addr: Void pointer to the sockaddr structure + * + * This function copies the HW address from the sockaddr strucutre to the + * net_device structure and updates the address in HW. + * + * Return: Error if the net device is busy or 0 if the addr is set + * successfully + */ +static int xemaclite_set_mac_address(struct net_device *dev, void *address) +{ + struct net_local *lp = netdev_priv(dev); + struct sockaddr *addr = address; + + if (netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + xemaclite_update_address(lp, dev->dev_addr); + return 0; +} + +/** + * xemaclite_tx_timeout - Callback for Tx Timeout + * @dev: Pointer to the network device + * + * This function is called when Tx time out occurs for Emaclite device. + */ +static void xemaclite_tx_timeout(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + unsigned long flags; + + dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n", + TX_TIMEOUT * 1000UL / HZ); + + dev->stats.tx_errors++; + + /* Reset the device */ + spin_lock_irqsave(&lp->reset_lock, flags); + + /* Shouldn't really be necessary, but shouldn't hurt */ + netif_stop_queue(dev); + + xemaclite_disable_interrupts(lp); + xemaclite_enable_interrupts(lp); + + if (lp->deferred_skb) { + dev_kfree_skb(lp->deferred_skb); + lp->deferred_skb = NULL; + dev->stats.tx_errors++; + } + + /* To exclude tx timeout */ + dev->trans_start = jiffies; /* prevent tx timeout */ + + /* We're all ready to go. Start the queue */ + netif_wake_queue(dev); + spin_unlock_irqrestore(&lp->reset_lock, flags); +} + +/**********************/ +/* Interrupt Handlers */ +/**********************/ + +/** + * xemaclite_tx_handler - Interrupt handler for frames sent + * @dev: Pointer to the network device + * + * This function updates the number of packets transmitted and handles the + * deferred skb, if there is one. + */ +static void xemaclite_tx_handler(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + + dev->stats.tx_packets++; + if (lp->deferred_skb) { + if (xemaclite_send_data(lp, + (u8 *) lp->deferred_skb->data, + lp->deferred_skb->len) != 0) + return; + else { + dev->stats.tx_bytes += lp->deferred_skb->len; + dev_kfree_skb_irq(lp->deferred_skb); + lp->deferred_skb = NULL; + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); + } + } +} + +/** + * xemaclite_rx_handler- Interrupt handler for frames received + * @dev: Pointer to the network device + * + * This function allocates memory for a socket buffer, fills it with data + * received and hands it over to the TCP/IP stack. + */ +static void xemaclite_rx_handler(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + struct sk_buff *skb; + unsigned int align; + u32 len; + + len = ETH_FRAME_LEN + ETH_FCS_LEN; + skb = netdev_alloc_skb(dev, len + ALIGNMENT); + if (!skb) { + /* Couldn't get memory. */ + dev->stats.rx_dropped++; + dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n"); + return; + } + + /* + * A new skb should have the data halfword aligned, but this code is + * here just in case that isn't true. Calculate how many + * bytes we should reserve to get the data to start on a word + * boundary */ + align = BUFFER_ALIGN(skb->data); + if (align) + skb_reserve(skb, align); + + skb_reserve(skb, 2); + + len = xemaclite_recv_data(lp, (u8 *) skb->data); + + if (!len) { + dev->stats.rx_errors++; + dev_kfree_skb_irq(skb); + return; + } + + skb_put(skb, len); /* Tell the skb how much data we got */ + + skb->protocol = eth_type_trans(skb, dev); + skb_checksum_none_assert(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + + if (!skb_defer_rx_timestamp(skb)) + netif_rx(skb); /* Send the packet upstream */ +} + +/** + * xemaclite_interrupt - Interrupt handler for this driver + * @irq: Irq of the Emaclite device + * @dev_id: Void pointer to the network device instance used as callback + * reference + * + * This function handles the Tx and Rx interrupts of the EmacLite device. + */ +static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) +{ + bool tx_complete = false; + struct net_device *dev = dev_id; + struct net_local *lp = netdev_priv(dev); + void __iomem *base_addr = lp->base_addr; + u32 tx_status; + + /* Check if there is Rx Data available */ + if ((__raw_readl(base_addr + XEL_RSR_OFFSET) & + XEL_RSR_RECV_DONE_MASK) || + (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) + & XEL_RSR_RECV_DONE_MASK)) + + xemaclite_rx_handler(dev); + + /* Check if the Transmission for the first buffer is completed */ + tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET); + if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { + + tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; + __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET); + + tx_complete = true; + } + + /* Check if the Transmission for the second buffer is completed */ + tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { + + tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; + __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); + + tx_complete = true; + } + + /* If there was a Tx interrupt, call the Tx Handler */ + if (tx_complete != 0) + xemaclite_tx_handler(dev); + + return IRQ_HANDLED; +} + +/**********************/ +/* MDIO Bus functions */ +/**********************/ + +/** + * xemaclite_mdio_wait - Wait for the MDIO to be ready to use + * @lp: Pointer to the Emaclite device private data + * + * This function waits till the device is ready to accept a new MDIO + * request. + * + * Return: 0 for success or ETIMEDOUT for a timeout + */ + +static int xemaclite_mdio_wait(struct net_local *lp) +{ + unsigned long end = jiffies + 2; + + /* wait for the MDIO interface to not be busy or timeout + after some time. + */ + while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & + XEL_MDIOCTRL_MDIOSTS_MASK) { + if (time_before_eq(end, jiffies)) { + WARN_ON(1); + return -ETIMEDOUT; + } + msleep(1); + } + return 0; +} + +/** + * xemaclite_mdio_read - Read from a given MII management register + * @bus: the mii_bus struct + * @phy_id: the phy address + * @reg: register number to read from + * + * This function waits till the device is ready to accept a new MDIO + * request and then writes the phy address to the MDIO Address register + * and reads data from MDIO Read Data register, when its available. + * + * Return: Value read from the MII management register + */ +static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct net_local *lp = bus->priv; + u32 ctrl_reg; + u32 rc; + + if (xemaclite_mdio_wait(lp)) + return -ETIMEDOUT; + + /* Write the PHY address, register number and set the OP bit in the + * MDIO Address register. Set the Status bit in the MDIO Control + * register to start a MDIO read transaction. + */ + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(XEL_MDIOADDR_OP_MASK | + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); + + if (xemaclite_mdio_wait(lp)) + return -ETIMEDOUT; + + rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET); + + dev_dbg(&lp->ndev->dev, + "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +/** + * xemaclite_mdio_write - Write to a given MII management register + * @bus: the mii_bus struct + * @phy_id: the phy address + * @reg: register number to write to + * @val: value to write to the register number specified by reg + * + * This function waits till the device is ready to accept a new MDIO + * request and then writes the val to the MDIO Write Data register. + */ +static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + struct net_local *lp = bus->priv; + u32 ctrl_reg; + + dev_dbg(&lp->ndev->dev, + "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + if (xemaclite_mdio_wait(lp)) + return -ETIMEDOUT; + + /* Write the PHY address, register number and clear the OP bit in the + * MDIO Address register and then write the value into the MDIO Write + * Data register. Finally, set the Status bit in the MDIO Control + * register to start a MDIO write transaction. + */ + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(~XEL_MDIOADDR_OP_MASK & + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); + + return 0; +} + +/** + * xemaclite_mdio_setup - Register mii_bus for the Emaclite device + * @lp: Pointer to the Emaclite device private data + * @ofdev: Pointer to OF device structure + * + * This function enables MDIO bus in the Emaclite device and registers a + * mii_bus. + * + * Return: 0 upon success or a negative error upon failure + */ +static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) +{ + struct mii_bus *bus; + int rc; + struct resource res; + struct device_node *np = of_get_parent(lp->phy_node); + struct device_node *npp; + + /* Don't register the MDIO bus if the phy_node or its parent node + * can't be found. + */ + if (!np) { + dev_err(dev, "Failed to register mdio bus.\n"); + return -ENODEV; + } + npp = of_get_parent(np); + + of_address_to_resource(npp, 0, &res); + if (lp->ndev->mem_start != res.start) { + struct phy_device *phydev; + phydev = of_phy_find_device(lp->phy_node); + if (!phydev) + dev_info(dev, + "MDIO of the phy is not registered yet\n"); + return 0; + } + + /* Enable the MDIO bus by asserting the enable bit in MDIO Control + * register. + */ + __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); + + bus = mdiobus_alloc(); + if (!bus) { + dev_err(dev, "Failed to allocate mdiobus\n"); + return -ENOMEM; + } + + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long)res.start); + bus->priv = lp; + bus->name = "Xilinx Emaclite MDIO"; + bus->read = xemaclite_mdio_read; + bus->write = xemaclite_mdio_write; + bus->parent = dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + + lp->mii_bus = bus; + + rc = of_mdiobus_register(bus, np); + if (rc) { + dev_err(dev, "Failed to register mdio bus.\n"); + goto err_register; + } + + return 0; + +err_register: + mdiobus_free(bus); + return rc; +} + +/** + * xemaclite_adjust_link - Link state callback for the Emaclite device + * @ndev: pointer to net_device struct + * + * There's nothing in the Emaclite device to be configured when the link + * state changes. We just print the status. + */ +static void xemaclite_adjust_link(struct net_device *ndev) +{ + struct net_local *lp = netdev_priv(ndev); + struct phy_device *phy = lp->phy_dev; + int link_state; + + /* hash together the state values to decide if something has changed */ + link_state = phy->speed | (phy->duplex << 1) | phy->link; + + if (lp->last_link != link_state) { + lp->last_link = link_state; + phy_print_status(phy); + } +} + +/** + * xemaclite_open - Open the network device + * @dev: Pointer to the network device + * + * This function sets the MAC address, requests an IRQ and enables interrupts + * for the Emaclite device and starts the Tx queue. + * It also connects to the phy device, if MDIO is included in Emaclite device. + */ +static int xemaclite_open(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int retval; + + /* Just to be safe, stop the device first */ + xemaclite_disable_interrupts(lp); + + if (lp->phy_node) { + u32 bmcr; + + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + xemaclite_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + if (!lp->phy_dev) { + dev_err(&lp->ndev->dev, "of_phy_connect() failed\n"); + return -ENODEV; + } + + /* EmacLite doesn't support giga-bit speeds */ + lp->phy_dev->supported &= (PHY_BASIC_FEATURES); + lp->phy_dev->advertising = lp->phy_dev->supported; + + /* Don't advertise 1000BASE-T Full/Half duplex speeds */ + phy_write(lp->phy_dev, MII_CTRL1000, 0); + + /* Advertise only 10 and 100mbps full/half duplex speeds */ + phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | + ADVERTISE_CSMA); + + /* Restart auto negotiation */ + bmcr = phy_read(lp->phy_dev, MII_BMCR); + bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); + phy_write(lp->phy_dev, MII_BMCR, bmcr); + + phy_start(lp->phy_dev); + } + + /* Set the MAC address each time opened */ + xemaclite_update_address(lp, dev->dev_addr); + + /* Grab the IRQ */ + retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev); + if (retval) { + dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n", + dev->irq); + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + return retval; + } + + /* Enable Interrupts */ + xemaclite_enable_interrupts(lp); + + /* We're ready to go */ + netif_start_queue(dev); + + return 0; +} + +/** + * xemaclite_close - Close the network device + * @dev: Pointer to the network device + * + * This function stops the Tx queue, disables interrupts and frees the IRQ for + * the Emaclite device. + * It also disconnects the phy device associated with the Emaclite device. + */ +static int xemaclite_close(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + + netif_stop_queue(dev); + xemaclite_disable_interrupts(lp); + free_irq(dev->irq, dev); + + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + return 0; +} + +/** + * xemaclite_send - Transmit a frame + * @orig_skb: Pointer to the socket buffer to be transmitted + * @dev: Pointer to the network device + * + * This function checks if the Tx buffer of the Emaclite device is free to send + * data. If so, it fills the Tx buffer with data from socket buffer data, + * updates the stats and frees the socket buffer. The Tx completion is signaled + * by an interrupt. If the Tx buffer isn't free, then the socket buffer is + * deferred and the Tx queue is stopped so that the deferred socket buffer can + * be transmitted when the Emaclite device is free to transmit data. + * + * Return: 0, always. + */ +static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + struct sk_buff *new_skb; + unsigned int len; + unsigned long flags; + + len = orig_skb->len; + + new_skb = orig_skb; + + spin_lock_irqsave(&lp->reset_lock, flags); + if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) { + /* If the Emaclite Tx buffer is busy, stop the Tx queue and + * defer the skb for transmission during the ISR, after the + * current transmission is complete */ + netif_stop_queue(dev); + lp->deferred_skb = new_skb; + /* Take the time stamp now, since we can't do this in an ISR. */ + skb_tx_timestamp(new_skb); + spin_unlock_irqrestore(&lp->reset_lock, flags); + return 0; + } + spin_unlock_irqrestore(&lp->reset_lock, flags); + + skb_tx_timestamp(new_skb); + + dev->stats.tx_bytes += len; + dev_consume_skb_any(new_skb); + + return 0; +} + +/** + * xemaclite_remove_ndev - Free the network device + * @ndev: Pointer to the network device to be freed + * + * This function un maps the IO region of the Emaclite device and frees the net + * device. + */ +static void xemaclite_remove_ndev(struct net_device *ndev) +{ + if (ndev) { + free_netdev(ndev); + } +} + +/** + * get_bool - Get a parameter from the OF device + * @ofdev: Pointer to OF device structure + * @s: Property to be retrieved + * + * This function looks for a property in the device node and returns the value + * of the property if its found or 0 if the property is not found. + * + * Return: Value of the parameter if the parameter is found, or 0 otherwise + */ +static bool get_bool(struct platform_device *ofdev, const char *s) +{ + u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL); + + if (p) { + return (bool)*p; + } else { + dev_warn(&ofdev->dev, "Parameter %s not found," + "defaulting to false\n", s); + return false; + } +} + +static struct net_device_ops xemaclite_netdev_ops; + +/** + * xemaclite_of_probe - Probe method for the Emaclite device. + * @ofdev: Pointer to OF device structure + * @match: Pointer to the structure used for matching a device + * + * This function probes for the Emaclite device in the device tree. + * It initializes the driver data structure and the hardware, sets the MAC + * address and registers the network device. + * It also registers a mii_bus for the Emaclite device, if MDIO is included + * in the device. + * + * Return: 0, if the driver is bound to the Emaclite device, or + * a negative error if there is failure. + */ +static int xemaclite_of_probe(struct platform_device *ofdev) +{ + struct resource *res; + struct net_device *ndev = NULL; + struct net_local *lp = NULL; + struct device *dev = &ofdev->dev; + const void *mac_address; + + int rc = 0; + + dev_info(dev, "Device Tree Probing\n"); + + /* Create an ethernet device instance */ + ndev = alloc_etherdev(sizeof(struct net_local)); + if (!ndev) + return -ENOMEM; + + dev_set_drvdata(dev, ndev); + SET_NETDEV_DEV(ndev, &ofdev->dev); + + lp = netdev_priv(ndev); + lp->ndev = ndev; + + /* Get IRQ for the device */ + res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "no IRQ found\n"); + rc = -ENXIO; + goto error; + } + + ndev->irq = res->start; + + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + lp->base_addr = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(lp->base_addr)) { + rc = PTR_ERR(lp->base_addr); + goto error; + } + + ndev->mem_start = res->start; + ndev->mem_end = res->end; + + spin_lock_init(&lp->reset_lock); + lp->next_tx_buf_to_use = 0x0; + lp->next_rx_buf_to_use = 0x0; + lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); + lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); + mac_address = of_get_mac_address(ofdev->dev.of_node); + + if (mac_address) + /* Set the MAC address. */ + memcpy(ndev->dev_addr, mac_address, ETH_ALEN); + else + dev_warn(dev, "No MAC address found\n"); + + /* Clear the Tx CSR's in case this is a restart */ + __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); + __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + + /* Set the MAC address in the EmacLite device */ + xemaclite_update_address(lp, ndev->dev_addr); + + lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0); + rc = xemaclite_mdio_setup(lp, &ofdev->dev); + if (rc) + dev_warn(&ofdev->dev, "error registering MDIO bus\n"); + + dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr); + + ndev->netdev_ops = &xemaclite_netdev_ops; + ndev->flags &= ~IFF_MULTICAST; + ndev->watchdog_timeo = TX_TIMEOUT; + + /* Finally, register the device */ + rc = register_netdev(ndev); + if (rc) { + dev_err(dev, + "Cannot register network device, aborting\n"); + goto error; + } + + dev_info(dev, + "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n", + (unsigned int __force)ndev->mem_start, + (unsigned int __force)lp->base_addr, ndev->irq); + return 0; + +error: + xemaclite_remove_ndev(ndev); + return rc; +} + +/** + * xemaclite_of_remove - Unbind the driver from the Emaclite device. + * @of_dev: Pointer to OF device structure + * + * This function is called if a device is physically removed from the system or + * if the driver module is being unloaded. It frees any resources allocated to + * the device. + * + * Return: 0, always. + */ +static int xemaclite_of_remove(struct platform_device *of_dev) +{ + struct net_device *ndev = platform_get_drvdata(of_dev); + + struct net_local *lp = netdev_priv(ndev); + + /* Un-register the mii_bus, if configured */ + if (lp->has_mdio) { + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; + } + + unregister_netdev(ndev); + + of_node_put(lp->phy_node); + lp->phy_node = NULL; + + xemaclite_remove_ndev(ndev); + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +xemaclite_poll_controller(struct net_device *ndev) +{ + disable_irq(ndev->irq); + xemaclite_interrupt(ndev->irq, ndev); + enable_irq(ndev->irq); +} +#endif + +static struct net_device_ops xemaclite_netdev_ops = { + .ndo_open = xemaclite_open, + .ndo_stop = xemaclite_close, + .ndo_start_xmit = xemaclite_send, + .ndo_set_mac_address = xemaclite_set_mac_address, + .ndo_tx_timeout = xemaclite_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = xemaclite_poll_controller, +#endif +}; + +/* Match table for OF platform binding */ +static const struct of_device_id xemaclite_of_match[] = { + { .compatible = "xlnx,opb-ethernetlite-1.01.a", }, + { .compatible = "xlnx,opb-ethernetlite-1.01.b", }, + { .compatible = "xlnx,xps-ethernetlite-1.00.a", }, + { .compatible = "xlnx,xps-ethernetlite-2.00.a", }, + { .compatible = "xlnx,xps-ethernetlite-2.01.a", }, + { .compatible = "xlnx,xps-ethernetlite-3.00.a", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, xemaclite_of_match); + +static struct platform_driver xemaclite_of_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = xemaclite_of_match, + }, + .probe = xemaclite_of_probe, + .remove = xemaclite_of_remove, +}; + +module_platform_driver(xemaclite_of_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver"); +MODULE_LICENSE("GPL"); -- cgit 1.2.3-korg