From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/drivers/net/ethernet/intel/igb/e1000_phy.c | 109 +++++++++++++++++++--- 1 file changed, 96 insertions(+), 13 deletions(-) (limited to 'kernel/drivers/net/ethernet/intel/igb/e1000_phy.c') diff --git a/kernel/drivers/net/ethernet/intel/igb/e1000_phy.c b/kernel/drivers/net/ethernet/intel/igb/e1000_phy.c index c1bb64d83..23ec28f43 100644 --- a/kernel/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/kernel/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1,5 +1,5 @@ /* Intel(R) Gigabit Ethernet Linux driver - * Copyright(c) 2007-2014 Intel Corporation. + * Copyright(c) 2007-2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -36,9 +36,6 @@ static s32 igb_set_master_slave_mode(struct e1000_hw *hw); /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; -#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_m88_cable_length_table) / \ - sizeof(e1000_m88_cable_length_table[0])) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, @@ -49,9 +46,6 @@ static const u16 e1000_igp_2_cable_length_table[] = { 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; -#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_2_cable_length_table) / \ - sizeof(e1000_igp_2_cable_length_table[0])) /** * igb_check_reset_block - Check if PHY reset is blocked @@ -1268,6 +1262,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) switch (hw->phy.id) { case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I210_I_PHY_ID: reset_dsp = false; break; @@ -1276,9 +1272,9 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) reset_dsp = false; break; } - if (!reset_dsp) + if (!reset_dsp) { hw_dbg("Link taking longer than expected.\n"); - else { + } else { /* We didn't get link. * Reset the DSP and cross our fingers. */ @@ -1303,6 +1299,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (hw->phy.type != e1000_phy_m88 || hw->phy.id == I347AT4_E_PHY_ID || hw->phy.id == M88E1112_E_PHY_ID || + hw->phy.id == M88E1543_E_PHY_ID || + hw->phy.id == M88E1512_E_PHY_ID || hw->phy.id == I210_I_PHY_ID) goto out; @@ -1700,7 +1698,7 @@ s32 igb_get_cable_length_m88(struct e1000_hw *hw) index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT; - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + if (index >= ARRAY_SIZE(e1000_m88_cable_length_table) - 1) { ret_val = -E1000_ERR_PHY; goto out; } @@ -1743,6 +1741,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) phy->cable_length = phy_data / (is_cm ? 100 : 1); break; case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I347AT4_E_PHY_ID: /* Remember the original page select and set it to 7 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, @@ -1796,7 +1795,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT; - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + if (index >= ARRAY_SIZE(e1000_m88_cable_length_table) - 1) { ret_val = -E1000_ERR_PHY; goto out; } @@ -1840,7 +1839,7 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) s32 ret_val = 0; u16 phy_data, i, agc_value = 0; u16 cur_agc_index, max_agc_index = 0; - u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; + u16 min_agc_index = ARRAY_SIZE(e1000_igp_2_cable_length_table) - 1; static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { IGP02E1000_PHY_AGC_A, IGP02E1000_PHY_AGC_B, @@ -1863,7 +1862,7 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) IGP02E1000_AGC_LENGTH_MASK; /* Array index bound check. */ - if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || + if ((cur_agc_index >= ARRAY_SIZE(e1000_igp_2_cable_length_table)) || (cur_agc_index == 0)) { ret_val = -E1000_ERR_PHY; goto out; @@ -2194,6 +2193,90 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) return 0; } +/** + * igb_initialize_M88E1512_phy - Initialize M88E1512 PHY + * @hw: pointer to the HW structure + * + * Initialize Marvel 1512 to work correctly with Avoton. + **/ +s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xCC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x000D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg("Error committing the PHY changes\n"); + return ret_val; + } + + /* msec_delay(1000); */ + usleep_range(1000, 2000); +out: + return ret_val; +} + /** * igb_power_up_phy_copper - Restore copper link in case of PHY power down * @hw: pointer to the HW structure -- cgit 1.2.3-korg